Merge 5.7-rc6 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/core-api/printk-formats.rst

@@ -112,6 +112,20 @@ used when printing stack backtraces. The specifier takes into
 consideration the effect of compiler optimisations which may occur
 when tail-calls are used and marked with the noreturn GCC attribute.
 
+Probed Pointers from BPF / tracing
+----------------------------------
+
+::
+
+	%pks	kernel string
+	%pus	user string
+
+The ``k`` and ``u`` specifiers are used for printing prior probed memory from
+either kernel memory (k) or user memory (u). The subsequent ``s`` specifier
+results in printing a string. For direct use in regular vsnprintf() the (k)
+and (u) annotation is ignored, however, when used out of BPF's bpf_trace_printk(),
+for example, it reads the memory it is pointing to without faulting.
+
 Kernel Pointers
 ---------------
 

Documentation/devicetree/bindings/dma/fsl-edma.txt

@@ -10,7 +10,8 @@ Required properties:
 - compatible :
 	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
 	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
-	- "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC
+	- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
+	  LS1028A SoC.
 - reg : Specifies base physical address(s) and size of the eDMA registers.
 	The 1st region is eDMA control register's address and size.
 	The 2nd and the 3rd regions are programmable channel multiplexing

Documentation/usb/raw-gadget.rst

@@ -27,9 +27,8 @@ differences are:
 3. Raw Gadget provides a way to select a UDC device/driver to bind to,
    while GadgetFS currently binds to the first available UDC.
 
-4. Raw Gadget uses predictable endpoint names (handles) across different
+4. Raw Gadget explicitly exposes information about endpoints addresses and
-   UDCs (as long as UDCs have enough endpoints of each required transfer
+   capabilities allowing a user to write UDC-agnostic gadgets.
-   type).
 
 5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
 
@@ -50,12 +49,36 @@ The typical usage of Raw Gadget looks like:
    Raw Gadget and react to those depending on what kind of USB device
    needs to be emulated.
 
+Note, that some UDC drivers have fixed addresses assigned to endpoints, and
+therefore arbitrary endpoint addresses can't be used in the descriptors.
+Nevertheles, Raw Gadget provides a UDC-agnostic way to write USB gadgets.
+Once a USB_RAW_EVENT_CONNECT event is received via USB_RAW_IOCTL_EVENT_FETCH,
+the USB_RAW_IOCTL_EPS_INFO ioctl can be used to find out information about
+endpoints that the UDC driver has. Based on that information, the user must
+chose UDC endpoints that will be used for the gadget being emulated, and
+properly assign addresses in endpoint descriptors.
+
+You can find usage examples (along with a test suite) here:
+
+https://github.com/xairy/raw-gadget
+
+Internal details
+~~~~~~~~~~~~~~~~
+
+Currently every endpoint read/write ioctl submits a USB request and waits until
+its completion. This is the desired mode for coverage-guided fuzzing (as we'd
+like all USB request processing happen during the lifetime of a syscall),
+and must be kept in the implementation. (This might be slow for real world
+applications, thus the O_NONBLOCK improvement suggestion below.)
+
 Potential future improvements
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-- Implement ioctl's for setting/clearing halt status on endpoints.
+- Report more events (suspend, resume, etc.) through USB_RAW_IOCTL_EVENT_FETCH.
-
-- Reporting more events (suspend, resume, etc.) through
-  USB_RAW_IOCTL_EVENT_FETCH.
 
 - Support O_NONBLOCK I/O.
+
+- Support USB 3 features (accept SS endpoint companion descriptor when
+  enabling endpoints; allow providing stream_id for bulk transfers).
+
+- Support ISO transfer features (expose frame_number for completed requests).

MAINTAINERS

@@ -11718,8 +11718,9 @@ F:	net/core/drop_monitor.c
 
 NETWORKING DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>
+M:	Jakub Kicinski <kuba@kernel.org>
 L:	netdev@vger.kernel.org
-S:	Odd Fixes
+S:	Maintained
 W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
@@ -14642,6 +14643,7 @@ F:	drivers/iommu/s390-iommu.c
 
 S390 IUCV NETWORK LAYER
 M:	Julian Wiedmann <jwi@linux.ibm.com>
+M:	Karsten Graul <kgraul@linux.ibm.com>
 M:	Ursula Braun <ubraun@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
@@ -14652,6 +14654,7 @@ F:	net/iucv/
 
 S390 NETWORK DRIVERS
 M:	Julian Wiedmann <jwi@linux.ibm.com>
+M:	Karsten Graul <kgraul@linux.ibm.com>
 M:	Ursula Braun <ubraun@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -12,6 +12,7 @@ config ARM
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
 	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_SETUP_DMA_OPS

arch/arm/boot/dts/am574x-idk.dts

@@ -40,3 +40,7 @@
 	status = "okay";
 	dual_emac;
 };
+
+&m_can0 {
+	status = "disabled";
+};

arch/arm/boot/dts/dra7.dtsi

@@ -172,6 +172,7 @@
 			#address-cells = <1>;
 			ranges = <0x51000000 0x51000000 0x3000
 				  0x0	     0x20000000 0x10000000>;
+			dma-ranges;
 			/**
 			 * To enable PCI endpoint mode, disable the pcie1_rc
 			 * node and enable pcie1_ep mode.
@@ -185,7 +186,6 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
-				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -230,6 +230,7 @@
 			#address-cells = <1>;
 			ranges = <0x51800000 0x51800000 0x3000
 				  0x0	     0x30000000 0x10000000>;
+			dma-ranges;
 			status = "disabled";
 			pcie2_rc: pcie@51800000 {
 				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
@@ -240,7 +241,6 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
-				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;

arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts

@@ -75,8 +75,8 @@
 	imx27-phycard-s-rdk {
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
 			>;
 		};
 

arch/arm/boot/dts/imx6dl-yapp4-ursa.dts

@@ -38,7 +38,7 @@
 };
 
 &switch_ports {
-	/delete-node/ port@2;
+	/delete-node/ port@3;
 };
 
 &touchscreen {

arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi

@@ -72,8 +72,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm/boot/dts/motorola-mapphone-common.dtsi

@@ -367,6 +367,8 @@
 };
 
 &mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
 	/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
 	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
@@ -472,6 +474,37 @@
 		>;
 	};
 
+	/*
+	 * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
+	 * for gpio_100, but the internal pull makes wlan flakey on some
+	 * devices. Off mode value should be tested if we have off mode working
+	 * later on.
+	 */
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+		/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
+		OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
+
+		/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
+		OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
+		OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
+		OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
+
+		/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
+		OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
+		OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
+		OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
+		>;
+	};
+
 	/* gpmc_ncs0.gpio_50 */
 	poweroff_gpio: pinmux_poweroff_pins {
 		pinctrl-single,pins = <
@@ -690,14 +723,18 @@
 };
 
 /*
- * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
+ * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
- * uart1 wakeirq.
+ * for wake-up events for both the USB PHY and the UART. We can use gpio_149
+ * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
+ * have gpio_149 trigger before the UART transfer starts.
  */
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
 	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0xfc>;
+			       &omap4_pmx_core 0x110>;
+	uart-has-rtscts;
+	current-speed = <115200>;
 };
 
 &uart3 {

arch/arm/boot/dts/r7s9210.dtsi

@@ -304,7 +304,6 @@
 			reg = <0xe803b000 0x30>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 36>;
-			clock-names = "ostm0";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
@@ -314,7 +313,6 @@
 			reg = <0xe803c000 0x30>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 35>;
-			clock-names = "ostm1";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
@@ -324,7 +322,6 @@
 			reg = <0xe803d000 0x30>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 34>;
-			clock-names = "ostm2";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};

arch/arm/boot/dts/r8a73a4.dtsi

@@ -131,7 +131,14 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;

arch/arm/boot/dts/r8a7740.dtsi

@@ -479,7 +479,7 @@
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7740-cpg-clocks";
 			reg = <0xe6150000 0x10000>;
-			clocks = <&extal1_clk>, <&extalr_clk>;
+			clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "system", "pllc0", "pllc1",
 					     "pllc2", "r",

arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts

@@ -84,8 +84,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm/boot/dts/r8a7790-lager.dts

@@ -364,8 +364,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;

arch/arm/boot/dts/r8a7790-stout.dts

@@ -297,8 +297,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -387,8 +387,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;

arch/arm/boot/dts/r8a7791-porter.dts

@@ -181,8 +181,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;

arch/arm/boot/dts/r8a7792-blanche.dts

@@ -289,8 +289,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm/boot/dts/r8a7792-wheat.dts

@@ -249,14 +249,12 @@
 	 */
 	hdmi@3d {
 		compatible = "adi,adv7513";
-		reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
+		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg-names = "main", "edid", "cec", "packet";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
@@ -280,14 +278,12 @@
 
 	hdmi@39 {
 		compatible = "adi,adv7513";
-		reg = <0x39>, <0x29>, <0x49>, <0x59>;
+		reg = <0x39>, <0x49>, <0x29>, <0x59>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg-names = "main", "edid", "cec", "packet";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm/boot/dts/r8a7793-gose.dts

@@ -366,8 +366,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;

arch/arm/boot/dts/r8a7794-silk.dts

@@ -255,8 +255,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;

arch/arm/boot/dts/rk3036.dtsi

@@ -128,7 +128,7 @@
 		assigned-clocks = <&cru SCLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU>;
 		status = "disabled";
 	};

arch/arm/boot/dts/rk3228-evb.dts

@@ -46,7 +46,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			clocks = <&cru SCLK_MAC_PHY>;

arch/arm/boot/dts/rk3229-xms6.dts

@@ -150,7 +150,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400",
 			             "ethernet-phy-ieee802.3-c22";
 			reg = <0>;

arch/arm/boot/dts/rk322x.dtsi

@@ -555,7 +555,7 @@
 				  "pp1",
 				  "ppmmu1";
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU_A>;
 		status = "disabled";
 	};
@@ -1020,7 +1020,7 @@
 			};
 		};
 
-		spi-0 {
+		spi0 {
 			spi0_clk: spi0-clk {
 				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
 			};
@@ -1038,7 +1038,7 @@
 			};
 		};
 
-		spi-1 {
+		spi1 {
 			spi1_clk: spi1-clk {
 				rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
 			};

arch/arm/boot/dts/rk3xxx.dtsi

@@ -84,7 +84,7 @@
 		compatible = "arm,mali-400";
 		reg = <0x10090000 0x10000>;
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		assigned-clocks = <&cru ACLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_GPU>;

arch/arm/configs/keystone_defconfig

@@ -147,6 +147,7 @@ CONFIG_I2C_DAVINCI=y
 CONFIG_SPI=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y

arch/arm/configs/omap2plus_defconfig

@@ -274,6 +274,7 @@ CONFIG_SPI_TI_QSPI=m
 CONFIG_HSI=m
 CONFIG_OMAP_SSI=m
 CONFIG_SSI_PROTOCOL=m
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y

arch/arm/mach-oxnas/platsmp.c

@@ -27,7 +27,8 @@ static void __iomem *gic_cpu_ctrl;
 #define GIC_CPU_CTRL			0x00
 #define GIC_CPU_CTRL_ENABLE		1
 
-int __init ox820_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __init ox820_boot_secondary(unsigned int cpu,
+		struct task_struct *idle)
 {
 	/*
 	 * Write the address of secondary startup into the

arch/arm64/Kconfig

@@ -20,6 +20,7 @@ config ARM64
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SETUP_DMA_OPS

arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts

@@ -98,7 +98,7 @@
 };
 
 &codec_analog {
-	hpvcc-supply = <&reg_eldo1>;
+	cpvdd-supply = <&reg_eldo1>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -154,24 +154,6 @@
 		};
 	};
 
-	sound_spdif {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "On-board SPDIF";
-
-		simple-audio-card,cpu {
-			sound-dai = <&spdif>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&spdif_out>;
-		};
-	};
-
-	spdif_out: spdif-out {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-	};
-
 	timer {
 		compatible = "arm,armv8-timer";
 		allwinner,erratum-unknown1;

arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi

@@ -2319,7 +2319,7 @@
 				reg = <0x0 0xff400000 0x0 0x40000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-				clock-names = "ddr";
+				clock-names = "otg";
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
 				dr_mode = "peripheral";

arch/arm64/boot/dts/amlogic/meson-g12.dtsi

@@ -1,4 +1,3 @@
-
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2019 BayLibre, SAS

arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi

@@ -154,6 +154,10 @@
 	clock-latency = <50000>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
 &frddr_b {
 	status = "okay";
 };

arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts

@@ -545,7 +545,7 @@
 &usb {
 	status = "okay";
 	dr_mode = "host";
-	vbus-regulator = <&usb_pwr_en>;
+	vbus-supply = <&usb_pwr_en>;
 };
 
 &usb2_phy0 {

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -447,7 +447,7 @@
 
 		edma0: dma-controller@22c0000 {
 			#dma-cells = <2>;
-			compatible = "fsl,ls1028a-edma";
+			compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
 			reg = <0x0 0x22c0000 0x0 0x10000>,
 			      <0x0 0x22d0000 0x0 0x10000>,
 			      <0x0 0x22e0000 0x0 0x10000>;

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -264,7 +264,7 @@
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -543,7 +543,7 @@
 
 		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x10000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -603,7 +603,7 @@
 
 		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x10000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -863,7 +863,7 @@
 
 		aips4: bus@32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x32df0000 0x10000>;
+			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -241,7 +241,7 @@
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -448,7 +448,7 @@
 
 		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x10000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -508,7 +508,7 @@
 
 		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x10000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -718,7 +718,7 @@
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MN_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MN_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
@@ -754,7 +754,7 @@
 
 		aips4: bus@32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x32df0000 0x10000>;
+			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;

arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h

@@ -151,26 +151,26 @@
 #define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22                         0x070 0x2D0 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x074 0x2D4 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC              0x074 0x2D4 0x540 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03              0x074 0x2D4 0x4CC 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03              0x074 0x2D4 0x4CC 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24                         0x074 0x2D4 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2                       0x074 0x2D4 0x618 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23                      0x074 0x2D4 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x078 0x2D8 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER                        0x078 0x2D8 0x000 0x1 0x0
 #define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK                 0x078 0x2D8 0x53C 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02                 0x078 0x2D8 0x4C8 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02                 0x078 0x2D8 0x4C8 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25                            0x078 0x2D8 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3                          0x078 0x2D8 0x61C 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24                         0x078 0x2D8 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0                    0x07C 0x2DC 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00               0x07C 0x2DC 0x534 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01                 0x07C 0x2DC 0x4C4 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01                 0x07C 0x2DC 0x4C4 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26                            0x07C 0x2DC 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4                          0x07C 0x2DC 0x620 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25                         0x07C 0x2DC 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1                    0x080 0x2E0 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC                 0x080 0x2E0 0x538 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00                 0x080 0x2E0 0x4C0 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00                 0x080 0x2E0 0x4C0 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27                            0x080 0x2E0 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B                        0x080 0x2E0 0x000 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26                         0x080 0x2E0 0x000 0x7 0x0
@@ -291,7 +291,7 @@
 #define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA                             0x0C8 0x328 0x5C0 0x2 0x1
 #define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX                         0x0C8 0x328 0x5F0 0x3 0x2
 #define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX                         0x0C8 0x328 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00                0x0C8 0x328 0x4C0 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00                0x0C8 0x328 0x4C0 0x4 0x2
 #define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15                           0x0C8 0x328 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                0x0C8 0x328 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02                    0x0C8 0x328 0x000 0x7 0x0
@@ -313,7 +313,7 @@
 #define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                         0x0D4 0x334 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO                          0x0D4 0x334 0x56C 0x2 0x0
 #define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN                    0x0D4 0x334 0x544 0x3 0x1
-#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03                0x0D4 0x334 0x4CC 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03                0x0D4 0x334 0x4CC 0x4 0x2
 #define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18                           0x0D4 0x334 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET             0x0D4 0x334 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B                     0x0D8 0x338 0x000 0x0 0x0
@@ -487,27 +487,27 @@
 #define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02              0x134 0x394 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT                             0x134 0x394 0x000 0x2 0x0
 #define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL                             0x134 0x394 0x5C4 0x3 0x1
-#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00                0x134 0x394 0x4C0 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00                0x134 0x394 0x4C0 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21                           0x134 0x394 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x138 0x398 0x4FC 0x0 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03              0x138 0x398 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC                0x138 0x398 0x4D8 0x2 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC                0x138 0x398 0x510 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01                0x138 0x398 0x4C4 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01                0x138 0x398 0x4C4 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22                           0x138 0x398 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX                              0x138 0x398 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x13C 0x39C 0x500 0x0 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04              0x13C 0x39C 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC                0x13C 0x39C 0x4D8 0x2 0x1
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK                0x13C 0x39C 0x50C 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02                0x13C 0x39C 0x4C8 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02                0x13C 0x39C 0x4C8 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23                           0x13C 0x39C 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX                              0x13C 0x39C 0x54C 0x6 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x140 0x3A0 0x504 0x0 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05              0x140 0x3A0 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC                0x140 0x3A0 0x4D8 0x2 0x2
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00              0x140 0x3A0 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03                0x140 0x3A0 0x4CC 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03                0x140 0x3A0 0x4CC 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24                           0x140 0x3A0 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX                              0x140 0x3A0 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK                   0x144 0x3A4 0x4F0 0x0 0x0
@@ -528,22 +528,22 @@
 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00              0x150 0x3B0 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x150 0x3B0 0x4F8 0x1 0x1
 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01              0x150 0x3B0 0x000 0x2 0x0
-#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00                0x150 0x3B0 0x4C0 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00                0x150 0x3B0 0x4C0 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN                 0x150 0x3B0 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02                           0x150 0x3B0 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01              0x154 0x3B4 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x154 0x3B4 0x4FC 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01                0x154 0x3B4 0x4C4 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01                0x154 0x3B4 0x4C4 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT                0x154 0x3B4 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03                           0x154 0x3B4 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02              0x158 0x3B8 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x158 0x3B8 0x500 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02                0x158 0x3B8 0x4C8 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02                0x158 0x3B8 0x4C8 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC                            0x158 0x3B8 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04                           0x158 0x3B8 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03              0x15C 0x3BC 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x15C 0x3BC 0x504 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03                0x15C 0x3BC 0x4CC 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03                0x15C 0x3BC 0x4CC 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO                           0x15C 0x3BC 0x57C 0x4 0x1
 #define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05                           0x15C 0x3BC 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04              0x160 0x3C0 0x000 0x0 0x0
@@ -624,7 +624,7 @@
 #define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX                         0x19C 0x3FC 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX                         0x19C 0x3FC 0x5E8 0x4 0x2
 #define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21                           0x19C 0x3FC 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02                0x19C 0x3FC 0x4C8 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02                0x19C 0x3FC 0x4C8 0x6 0x5
 #define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00                        0x19C 0x3FC 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK                 0x1A0 0x400 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK                 0x1A0 0x400 0x50C 0x1 0x2
@@ -632,7 +632,7 @@
 #define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX                          0x1A0 0x400 0x5E8 0x4 0x3
 #define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX                          0x1A0 0x400 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                            0x1A0 0x400 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01                 0x1A0 0x400 0x4C4 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01                 0x1A0 0x400 0x4C4 0x6 0x5
 #define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01                         0x1A0 0x400 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00              0x1A4 0x404 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00              0x1A4 0x404 0x000 0x1 0x0
@@ -641,7 +641,7 @@
 #define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS                        0x1A4 0x404 0x5E4 0x4 0x2
 #define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS                        0x1A4 0x404 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23                           0x1A4 0x404 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03                0x1A4 0x404 0x4CC 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03                0x1A4 0x404 0x4CC 0x6 0x5
 #define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02                        0x1A4 0x404 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC                0x1A8 0x408 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01              0x1A8 0x408 0x000 0x1 0x0
@@ -650,13 +650,13 @@
 #define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS                        0x1A8 0x408 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS                        0x1A8 0x408 0x5E4 0x4 0x3
 #define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24                           0x1A8 0x408 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02                0x1A8 0x408 0x4C8 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02                0x1A8 0x408 0x4C8 0x6 0x6
 #define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE                         0x1A8 0x408 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK                 0x1AC 0x40C 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02               0x1AC 0x40C 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX                               0x1AC 0x40C 0x54C 0x3 0x1
 #define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25                            0x1AC 0x40C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01                 0x1AC 0x40C 0x4C4 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01                 0x1AC 0x40C 0x4C4 0x6 0x6
 #define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT                       0x1AC 0x40C 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00              0x1B0 0x410 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03              0x1B0 0x410 0x000 0x1 0x0
@@ -680,7 +680,7 @@
 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01              0x1B8 0x418 0x000 0x3 0x0
 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN                    0x1B8 0x418 0x544 0x4 0x2
 #define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28                           0x1B8 0x418 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00                0x1B8 0x418 0x4C0 0x6 0x4
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00                0x1B8 0x418 0x4C0 0x6 0x5
 #define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00                       0x1B8 0x418 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK                 0x1BC 0x41C 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02               0x1BC 0x41C 0x000 0x1 0x0
@@ -697,7 +697,7 @@
 #define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS                         0x1C0 0x420 0x5EC 0x4 0x3
 #define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS                         0x1C0 0x420 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30                            0x1C0 0x420 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01                 0x1C0 0x420 0x4C4 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01                 0x1C0 0x420 0x4C4 0x6 0x7
 #define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00                         0x1C0 0x420 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC                0x1C4 0x424 0x4EC 0x0 0x1
 #define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1C4 0x424 0x000 0x1 0x0
@@ -706,7 +706,7 @@
 #define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX                         0x1C4 0x424 0x5F0 0x4 0x4
 #define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX                         0x1C4 0x424 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31                           0x1C4 0x424 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03                0x1C4 0x424 0x4CC 0x6 0x5
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03                0x1C4 0x424 0x4CC 0x6 0x6
 #define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01                        0x1C4 0x424 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK                 0x1C8 0x428 0x4E8 0x0 0x1
 #define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02               0x1C8 0x428 0x000 0x1 0x0
@@ -715,7 +715,7 @@
 #define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX                          0x1C8 0x428 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX                          0x1C8 0x428 0x5F0 0x4 0x5
 #define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00                            0x1C8 0x428 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02                 0x1C8 0x428 0x4C8 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02                 0x1C8 0x428 0x4C8 0x6 0x7
 #define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02                         0x1C8 0x428 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00               0x1CC 0x42C 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03               0x1CC 0x42C 0x000 0x1 0x0

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -145,7 +145,7 @@
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -318,7 +318,7 @@
 
 		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x400000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -378,7 +378,7 @@
 
 		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x400000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;

arch/arm64/boot/dts/freescale/imx8mq.dtsi

@@ -291,7 +291,7 @@
 
 		bus@30000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -696,7 +696,7 @@
 
 		bus@30400000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x10000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -756,7 +756,7 @@
 
 		bus@30800000 { /* AIPS3 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x10000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -1029,7 +1029,7 @@
 
 		bus@32c00000 { /* AIPS4 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x32df0000 0x10000>;
+			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -658,8 +658,8 @@
 	s11 {
 		qcom,saw-leader;
 		regulator-always-on;
-		regulator-min-microvolt = <1230000>;
+		regulator-min-microvolt = <980000>;
-		regulator-max-microvolt = <1230000>;
+		regulator-max-microvolt = <980000>;
 	};
 };
 
@@ -908,10 +908,27 @@
 	status = "okay";
 };
 
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "DB820c";
-	audio-routing =	"RX_BIAS", "MCLK";
+	audio-routing =	"RX_BIAS", "MCLK",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -2066,6 +2066,8 @@
 						reg = <APR_SVC_ASM>;
 						q6asmdai: dais {
 							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#sound-dai-cells = <1>;
 							iommus = <&lpass_q6_smmu 1>;
 						};

arch/arm64/boot/dts/qcom/sdm845-db845c.dts

@@ -442,17 +442,14 @@
 &q6asmdai {
 	dai@0 {
 		reg = <0>;
-		direction = <2>;
 	};
 
 	dai@1 {
 		reg = <1>;
-		direction = <2>;
 	};
 
 	dai@2 {
 		reg = <2>;
-		direction = <1>;
 	};
 
 	dai@3 {

arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

@@ -359,12 +359,10 @@
 &q6asmdai {
 	dai@0 {
 		reg = <0>;
-		direction = <2>;
 	};
 
 	dai@1 {
 		reg = <1>;
-		direction = <1>;
 	};
 };
 

arch/arm64/boot/dts/renesas/r8a77970-eagle.dts

@@ -137,8 +137,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts

@@ -150,8 +150,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm64/boot/dts/renesas/r8a77980-condor.dts

@@ -174,8 +174,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts

@@ -141,8 +141,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm64/boot/dts/renesas/r8a77980.dtsi

@@ -1318,6 +1318,7 @@
 		ipmmu_vip0: mmu@e7b00000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7b00000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -1325,6 +1326,7 @@
 		ipmmu_vip1: mmu@e7960000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 11>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};

arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts

@@ -360,8 +360,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm64/boot/dts/renesas/r8a77995-draak.dts

@@ -272,8 +272,8 @@
 
 	hdmi-encoder@39 {
 		compatible = "adi,adv7511w";
-		reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
+		reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
-		reg-names = "main", "edid", "packet", "cec";
+		reg-names = "main", "edid", "cec", "packet";
 		interrupt-parent = <&gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 
@@ -284,8 +284,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;

arch/arm64/boot/dts/rockchip/px30.dtsi

@@ -143,7 +143,7 @@
 	};
 
 	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/rockchip/rk3308.dtsi

@@ -127,7 +127,7 @@
 	};
 
 	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/rockchip/rk3328-evb.dts

@@ -82,17 +82,16 @@
 &gmac2phy {
 	phy-supply = <&vcc_phy>;
 	clock_in_out = "output";
-	assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
 	assigned-clock-rate = <50000000>;
 	assigned-clocks = <&cru SCLK_MAC2PHY>;
 	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
-
+	status = "okay";
 };
 
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;

arch/arm64/boot/dts/rockchip/rk3328-rock64.dts

@@ -170,7 +170,7 @@
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -299,8 +299,6 @@
 	grf: syscon@ff100000 {
 		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff100000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		io_domains: io-domains {
 			compatible = "rockchip,rk3328-io-voltage-domain";
@@ -1794,10 +1792,6 @@
 		};
 
 		gmac2phy {
-			fephyled_speed100: fephyled-speed100 {
-				rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>;
-			};
-
 			fephyled_speed10: fephyled-speed10 {
 				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
 			};
@@ -1806,18 +1800,6 @@
 				rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
 			};
 
-			fephyled_rxm0: fephyled-rxm0 {
-				rockchip,pins = <0 RK_PD5 1 &pcfg_pull_none>;
-			};
-
-			fephyled_txm0: fephyled-txm0 {
-				rockchip,pins = <0 RK_PD5 2 &pcfg_pull_none>;
-			};
-
-			fephyled_linkm0: fephyled-linkm0 {
-				rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>;
-			};
-
 			fephyled_rxm1: fephyled-rxm1 {
 				rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
 			};

arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts

@@ -147,7 +147,7 @@
 			"Speaker", "Speaker Amplifier OUTL",
 			"Speaker", "Speaker Amplifier OUTR";
 
-		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
 		simple-audio-card,aux-devs = <&speaker_amp>;
 		simple-audio-card,pin-switches = "Speaker";
 
@@ -690,7 +690,8 @@
 	fusb0: fusb30x@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
-		fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fusb0_int_gpio>;
 		vbus-supply = <&vbus_typec>;
@@ -788,13 +789,13 @@
 
 	dc-charger {
 		dc_det_gpio: dc-det-gpio {
-			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	es8316 {
 		hp_det_gpio: hp-det-gpio {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -403,7 +403,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_0: dwc3 {
+		usbdrd_dwc3_0: usb@fe800000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -439,7 +439,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_1: dwc3 {
+		usbdrd_dwc3_1: usb@fe900000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1124,8 +1124,6 @@
 	pmugrf: syscon@ff320000 {
 		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff320000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		pmu_io_domains: io-domains {
 			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
@@ -1883,10 +1881,10 @@
 	gpu: gpu@ff9a0000 {
 		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
 		reg = <0x0 0xff9a0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "gpu", "job", "mmu";
+		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		#cooling-cells = <2>;
 		power-domains = <&power RK3399_PD_GPU>;

arch/arm64/configs/defconfig

@@ -208,7 +208,7 @@ CONFIG_PCIE_QCOM=y
 CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCIE_KIRIN=y
 CONFIG_PCIE_HISI_STB=y
-CONFIG_PCIE_TEGRA194=m
+CONFIG_PCIE_TEGRA194_HOST=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER_USER_HELPER=y
@@ -567,6 +567,7 @@ CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
 CONFIG_MEDIA_SDR_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 # CONFIG_DVB_NET is not set
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
@@ -610,8 +611,9 @@ CONFIG_DRM_MSM=m
 CONFIG_DRM_TEGRA=m
 CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_DRM_DUMB_VGA_DAC=m
+CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
+CONFIG_DRM_DISPLAY_CONNECTOR=m
 CONFIG_DRM_SII902X=m
 CONFIG_DRM_THINE_THC63LVD1024=m
 CONFIG_DRM_TI_SN65DSI86=m
@@ -848,7 +850,8 @@ CONFIG_QCOM_APR=m
 CONFIG_ARCH_R8A774A1=y
 CONFIG_ARCH_R8A774B1=y
 CONFIG_ARCH_R8A774C0=y
-CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A77950=y
+CONFIG_ARCH_R8A77951=y
 CONFIG_ARCH_R8A77960=y
 CONFIG_ARCH_R8A77961=y
 CONFIG_ARCH_R8A77965=y

arch/arm64/kernel/machine_kexec.c

@@ -177,6 +177,7 @@ void machine_kexec(struct kimage *kimage)
 	 * the offline CPUs. Therefore, we must use the __* variant here.
 	 */
 	__flush_icache_range((uintptr_t)reboot_code_buffer,
+			     (uintptr_t)reboot_code_buffer +
 			     arm64_relocate_new_kernel_size);
 
 	/* Flush the kimage list and its buffers. */

arch/csky/Kconfig

@@ -8,6 +8,7 @@ config CSKY
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_QUEUED_RWLOCKS if NR_CPUS>2
+	select ARCH_WANT_FRAME_POINTERS if !CPU_CK610
 	select COMMON_CLK
 	select CLKSRC_MMIO
 	select CSKY_MPINTC if CPU_CK860
@@ -38,6 +39,7 @@ config CSKY
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_COPY_THREAD_TLS
+	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_FUNCTION_TRACER

arch/csky/Makefile

@@ -47,7 +47,7 @@ ifeq ($(CSKYABI),abiv2)
 KBUILD_CFLAGS += -mno-stack-size
 endif
 
-ifdef CONFIG_STACKTRACE
+ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS += -mbacktrace
 endif
 

arch/csky/abiv1/inc/abi/entry.h

@@ -167,8 +167,8 @@
 	 *   BA     Reserved  C   D   V
 	 */
 	cprcr	r6, cpcr30
-	lsri	r6, 28
+	lsri	r6, 29
-	lsli	r6, 28
+	lsli	r6, 29
 	addi	r6, 0xe
 	cpwcr	r6, cpcr30
 

arch/csky/abiv2/inc/abi/entry.h

@@ -285,8 +285,8 @@
 	 */
 	mfcr	r6, cr<30, 15> /* Get MSA0 */
 2:
-	lsri	r6, 28
+	lsri	r6, 29
-	lsli	r6, 28
+	lsli	r6, 29
 	addi	r6, 0x1ce
 	mtcr	r6, cr<30, 15> /* Set MSA0 */
 

arch/csky/abiv2/mcount.S

@@ -103,6 +103,8 @@ ENTRY(_mcount)
 	mov	a0, lr
 	subi	a0, 4
 	ldw	a1, (sp, 24)
+	lrw	a2, function_trace_op
+	ldw	a2, (a2, 0)
 
 	jsr	r26
 

arch/csky/include/asm/processor.h

@@ -41,8 +41,7 @@ extern struct cpuinfo_csky cpu_data[];
 #define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)
 
 struct thread_struct {
-	unsigned long  ksp;       /* kernel stack pointer */
+	unsigned long  sp;        /* kernel stack pointer */
-	unsigned long  sr;        /* saved status register */
 	unsigned long  trap_no;   /* saved status register */
 
 	/* FPU regs */
@@ -50,8 +49,7 @@ struct thread_struct {
 };
 
 #define INIT_THREAD  { \
-	.ksp = sizeof(init_stack) + (unsigned long) &init_stack, \
+	.sp = sizeof(init_stack) + (unsigned long) &init_stack, \
-	.sr = DEFAULT_PSR_VALUE, \
 }
 
 /*

arch/csky/include/asm/ptrace.h

@@ -58,6 +58,16 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 	return regs->usp;
 }
 
+static inline unsigned long frame_pointer(struct pt_regs *regs)
+{
+	return regs->regs[4];
+}
+static inline void frame_pointer_set(struct pt_regs *regs,
+				     unsigned long val)
+{
+	regs->regs[4] = val;
+}
+
 extern int regs_query_register_offset(const char *name);
 extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
 						unsigned int n);

arch/csky/include/asm/thread_info.h

@@ -38,7 +38,13 @@ struct thread_info {
 #define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
 
 #define thread_saved_fp(tsk) \
-	((unsigned long)(((struct switch_stack *)(tsk->thread.ksp))->r8))
+	((unsigned long)(((struct switch_stack *)(tsk->thread.sp))->r8))
+
+#define thread_saved_sp(tsk) \
+	((unsigned long)(tsk->thread.sp))
+
+#define thread_saved_lr(tsk) \
+	((unsigned long)(((struct switch_stack *)(tsk->thread.sp))->r15))
 
 static inline struct thread_info *current_thread_info(void)
 {
@@ -54,10 +60,10 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SIGPENDING		0	/* signal pending */
 #define TIF_NOTIFY_RESUME	1       /* callback before returning to user */
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_SYSCALL_TRACE	3	/* syscall trace active */
+#define TIF_UPROBE		3	/* uprobe breakpoint or singlestep */
-#define TIF_SYSCALL_TRACEPOINT	4       /* syscall tracepoint instrumentation */
+#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing */
+#define TIF_SYSCALL_TRACEPOINT	5       /* syscall tracepoint instrumentation */
-#define TIF_UPROBE		6	/* uprobe breakpoint or singlestep */
+#define TIF_SYSCALL_AUDIT	6	/* syscall auditing */
 #define TIF_POLLING_NRFLAG	16	/* poll_idle() is TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18      /* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */

arch/csky/include/asm/uaccess.h

@@ -253,7 +253,7 @@ do {								\
 
 extern int __get_user_bad(void);
 
-#define __copy_user(to, from, n)			\
+#define ___copy_to_user(to, from, n)			\
 do {							\
 	int w0, w1, w2, w3;				\
 	asm volatile(					\
@@ -288,31 +288,34 @@ do {							\
 	"       subi    %0, 4           \n"		\
 	"       br      3b              \n"		\
 	"5:     cmpnei  %0, 0           \n"  /* 1B */   \
-	"       bf      8f              \n"		\
+	"       bf      13f             \n"		\
 	"       ldb     %3, (%2, 0)     \n"		\
 	"6:     stb     %3, (%1, 0)     \n"		\
 	"       addi    %2,  1          \n"		\
 	"       addi    %1,  1          \n"		\
 	"       subi    %0,  1          \n"		\
 	"       br      5b              \n"		\
-	"7:     br      8f              \n"		\
+	"7:     subi	%0,  4          \n"		\
+	"8:     subi	%0,  4          \n"		\
+	"12:    subi	%0,  4          \n"		\
+	"       br      13f             \n"		\
 	".section __ex_table, \"a\"     \n"		\
 	".align   2                     \n"		\
-	".long    2b, 7b                \n"		\
+	".long    2b, 13f               \n"		\
-	".long    9b, 7b                \n"		\
+	".long    4b, 13f               \n"		\
-	".long   10b, 7b                \n"		\
+	".long    6b, 13f               \n"		\
+	".long    9b, 12b               \n"		\
+	".long   10b, 8b                \n"		\
 	".long   11b, 7b                \n"		\
-	".long    4b, 7b                \n"		\
-	".long    6b, 7b                \n"		\
 	".previous                      \n"		\
-	"8:                             \n"		\
+	"13:                            \n"		\
 	: "=r"(n), "=r"(to), "=r"(from), "=r"(w0),	\
 	  "=r"(w1), "=r"(w2), "=r"(w3)			\
 	: "0"(n), "1"(to), "2"(from)			\
 	: "memory");					\
 } while (0)
 
-#define __copy_user_zeroing(to, from, n)		\
+#define ___copy_from_user(to, from, n)			\
 do {							\
 	int tmp;					\
 	int nsave;					\
@@ -355,22 +358,22 @@ do {							\
 	"       addi    %1,  1          \n"		\
 	"       subi    %0,  1          \n"		\
 	"       br      5b              \n"		\
-	"8:     mov     %3, %0          \n"		\
+	"8:     stw     %3, (%1, 0)     \n"		\
-	"       movi    %4, 0           \n"		\
+	"       subi    %0, 4           \n"		\
-	"9:     stb     %4, (%1, 0)     \n"		\
+	"       bf      7f              \n"		\
-	"       addi    %1, 1           \n"		\
+	"9:     subi    %0, 8           \n"		\
-	"       subi    %3, 1           \n"		\
+	"       bf      7f              \n"		\
-	"       cmpnei  %3, 0           \n"		\
+	"13:    stw     %3, (%1, 8)     \n"		\
-	"       bt      9b              \n"		\
+	"       subi    %0, 12          \n"		\
-	"       br      7f              \n"		\
+	"       bf      7f              \n"		\
 	".section __ex_table, \"a\"     \n"		\
 	".align   2                     \n"		\
-	".long    2b, 8b                \n"		\
+	".long    2b, 7f                \n"		\
+	".long    4b, 7f                \n"		\
+	".long    6b, 7f                \n"		\
 	".long   10b, 8b                \n"		\
-	".long   11b, 8b                \n"		\
+	".long   11b, 9b                \n"		\
-	".long   12b, 8b                \n"		\
+	".long   12b,13b                \n"		\
-	".long    4b, 8b                \n"		\
-	".long    6b, 8b                \n"		\
 	".previous                      \n"		\
 	"7:                             \n"		\
 	: "=r"(n), "=r"(to), "=r"(from), "=r"(nsave),	\

arch/csky/kernel/Makefile

@@ -3,7 +3,7 @@ extra-y := head.o vmlinux.lds
 
 obj-y += entry.o atomic.o signal.o traps.o irq.o time.o vdso.o
 obj-y += power.o syscall.o syscall_table.o setup.o
-obj-y += process.o cpu-probe.o ptrace.o dumpstack.o
+obj-y += process.o cpu-probe.o ptrace.o stacktrace.o
 obj-y += probes/
 
 obj-$(CONFIG_MODULES)			+= module.o

arch/csky/kernel/asm-offsets.c

@@ -18,8 +18,7 @@ int main(void)
 	DEFINE(TASK_ACTIVE_MM,    offsetof(struct task_struct, active_mm));
 
 	/* offsets into the thread struct */
-	DEFINE(THREAD_KSP,        offsetof(struct thread_struct, ksp));
+	DEFINE(THREAD_KSP,        offsetof(struct thread_struct, sp));
-	DEFINE(THREAD_SR,         offsetof(struct thread_struct, sr));
 	DEFINE(THREAD_FESR,       offsetof(struct thread_struct, user_fp.fesr));
 	DEFINE(THREAD_FCR,        offsetof(struct thread_struct, user_fp.fcr));
 	DEFINE(THREAD_FPREG,      offsetof(struct thread_struct, user_fp.vr));

arch/csky/kernel/dumpstack.c

@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
-
-#include <linux/ptrace.h>
-
-int kstack_depth_to_print = 48;
-
-void show_trace(unsigned long *stack)
-{
-	unsigned long *stack_end;
-	unsigned long *stack_start;
-	unsigned long *fp;
-	unsigned long addr;
-
-	addr = (unsigned long) stack & THREAD_MASK;
-	stack_start = (unsigned long *) addr;
-	stack_end = (unsigned long *) (addr + THREAD_SIZE);
-
-	fp = stack;
-	pr_info("\nCall Trace:");
-
-	while (fp > stack_start && fp < stack_end) {
-#ifdef CONFIG_STACKTRACE
-		addr	= fp[1];
-		fp	= (unsigned long *) fp[0];
-#else
-		addr	= *fp++;
-#endif
-		if (__kernel_text_address(addr))
-			pr_cont("\n[<%08lx>] %pS", addr, (void *)addr);
-	}
-	pr_cont("\n");
-}
-
-void show_stack(struct task_struct *task, unsigned long *stack)
-{
-	if (!stack) {
-		if (task)
-			stack = (unsigned long *)thread_saved_fp(task);
-		else
-#ifdef CONFIG_STACKTRACE
-			asm volatile("mov %0, r8\n":"=r"(stack)::"memory");
-#else
-			stack = (unsigned long *)&stack;
-#endif
-	}
-
-	show_trace(stack);
-}

arch/csky/kernel/entry.S

@@ -330,11 +330,6 @@ ENTRY(__switch_to)
 	lrw	a3, TASK_THREAD
 	addu	a3, a0
 
-	mfcr	a2, psr			/* Save PSR value */
-	stw	a2, (a3, THREAD_SR)	/* Save PSR in task struct */
-	bclri	a2, 6			/* Disable interrupts */
-	mtcr	a2, psr
-
 	SAVE_SWITCH_STACK
 
 	stw	sp, (a3, THREAD_KSP)
@@ -345,12 +340,9 @@ ENTRY(__switch_to)
 
 	ldw	sp, (a3, THREAD_KSP)	/* Set next kernel sp */
 
-	ldw	a2, (a3, THREAD_SR)	/* Set next PSR */
-	mtcr	a2, psr
-
 #if  defined(__CSKYABIV2__)
-	addi	r7, a1, TASK_THREAD_INFO
+	addi	a3, a1, TASK_THREAD_INFO
-	ldw	tls, (r7, TINFO_TP_VALUE)
+	ldw	tls, (a3, TINFO_TP_VALUE)
 #endif
 
 	RESTORE_SWITCH_STACK

arch/csky/kernel/ftrace.c

@@ -202,6 +202,7 @@ int ftrace_disable_ftrace_graph_caller(void)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
+#ifdef CONFIG_DYNAMIC_FTRACE
 #ifndef CONFIG_CPU_HAS_ICACHE_INS
 struct ftrace_modify_param {
 	int command;
@@ -231,6 +232,7 @@ void arch_ftrace_update_code(int command)
 	stop_machine(__ftrace_modify_code, &param, cpu_online_mask);
 }
 #endif
+#endif /* CONFIG_DYNAMIC_FTRACE */
 
 /* _mcount is defined in abi's mcount.S */
 EXPORT_SYMBOL(_mcount);

arch/csky/kernel/perf_callchain.c

@@ -12,12 +12,17 @@ struct stackframe {
 
 static int unwind_frame_kernel(struct stackframe *frame)
 {
-	if (kstack_end((void *)frame->fp))
+	unsigned long low = (unsigned long)task_stack_page(current);
+	unsigned long high = low + THREAD_SIZE;
+
+	if (unlikely(frame->fp < low || frame->fp > high))
 		return -EPERM;
-	if (frame->fp & 0x3 || frame->fp < TASK_SIZE)
+
+	if (kstack_end((void *)frame->fp) || frame->fp & 0x3)
 		return -EPERM;
 
 	*frame = *(struct stackframe *)frame->fp;
+
 	if (__kernel_text_address(frame->lr)) {
 		int graph = 0;
 

arch/csky/kernel/probes/uprobes.c

@@ -11,6 +11,11 @@
 
 #define UPROBE_TRAP_NR	UINT_MAX
 
+bool is_swbp_insn(uprobe_opcode_t *insn)
+{
+	return (*insn & 0xffff) == UPROBE_SWBP_INSN;
+}
+
 unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
 {
 	return instruction_pointer(regs);

arch/csky/kernel/process.c

@@ -35,7 +35,7 @@ void flush_thread(void){}
  */
 unsigned long thread_saved_pc(struct task_struct *tsk)
 {
-	struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
+	struct switch_stack *sw = (struct switch_stack *)tsk->thread.sp;
 
 	return sw->r15;
 }
@@ -56,8 +56,8 @@ int copy_thread_tls(unsigned long clone_flags,
 	childstack = ((struct switch_stack *) childregs) - 1;
 	memset(childstack, 0, sizeof(struct switch_stack));
 
-	/* setup ksp for switch_to !!! */
+	/* setup thread.sp for switch_to !!! */
-	p->thread.ksp = (unsigned long)childstack;
+	p->thread.sp = (unsigned long)childstack;
 
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		memset(childregs, 0, sizeof(struct pt_regs));
@@ -98,37 +98,6 @@ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *pr_regs)
 	return 1;
 }
 
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long lr;
-	unsigned long *fp, *stack_start, *stack_end;
-	int count = 0;
-
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	stack_start = (unsigned long *)end_of_stack(p);
-	stack_end = (unsigned long *)(task_stack_page(p) + THREAD_SIZE);
-
-	fp = (unsigned long *) thread_saved_fp(p);
-	do {
-		if (fp < stack_start || fp > stack_end)
-			return 0;
-#ifdef CONFIG_STACKTRACE
-		lr = fp[1];
-		fp = (unsigned long *)fp[0];
-#else
-		lr = *fp++;
-#endif
-		if (!in_sched_functions(lr) &&
-		    __kernel_text_address(lr))
-			return lr;
-	} while (count++ < 16);
-
-	return 0;
-}
-EXPORT_SYMBOL(get_wchan);
-
 #ifndef CONFIG_CPU_PM_NONE
 void arch_cpu_idle(void)
 {

arch/csky/kernel/ptrace.c

@@ -41,6 +41,9 @@ static void singlestep_disable(struct task_struct *tsk)
 
 	regs = task_pt_regs(tsk);
 	regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_RUN;
+
+	/* Enable irq */
+	regs->sr |= BIT(6);
 }
 
 static void singlestep_enable(struct task_struct *tsk)
@@ -49,6 +52,9 @@ static void singlestep_enable(struct task_struct *tsk)
 
 	regs = task_pt_regs(tsk);
 	regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_SI;
+
+	/* Disable irq */
+	regs->sr &= ~BIT(6);
 }
 
 /*

arch/csky/kernel/stacktrace.c

@@ -1,57 +1,159 @@
 // SPDX-License-Identifier: GPL-2.0
-/* Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. */
 
 #include <linux/sched/debug.h>
 #include <linux/sched/task_stack.h>
 #include <linux/stacktrace.h>
 #include <linux/ftrace.h>
+#include <linux/ptrace.h>
+
+#ifdef CONFIG_FRAME_POINTER
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long ra;
+};
+
+void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
+			     bool (*fn)(unsigned long, void *), void *arg)
+{
+	unsigned long fp, sp, pc;
+
+	if (regs) {
+		fp = frame_pointer(regs);
+		sp = user_stack_pointer(regs);
+		pc = instruction_pointer(regs);
+	} else if (task == NULL || task == current) {
+		const register unsigned long current_sp __asm__ ("sp");
+		const register unsigned long current_fp __asm__ ("r8");
+		fp = current_fp;
+		sp = current_sp;
+		pc = (unsigned long)walk_stackframe;
+	} else {
+		/* task blocked in __switch_to */
+		fp = thread_saved_fp(task);
+		sp = thread_saved_sp(task);
+		pc = thread_saved_lr(task);
+	}
+
+	for (;;) {
+		unsigned long low, high;
+		struct stackframe *frame;
+
+		if (unlikely(!__kernel_text_address(pc) || fn(pc, arg)))
+			break;
+
+		/* Validate frame pointer */
+		low = sp;
+		high = ALIGN(sp, THREAD_SIZE);
+		if (unlikely(fp < low || fp > high || fp & 0x3))
+			break;
+		/* Unwind stack frame */
+		frame = (struct stackframe *)fp;
+		sp = fp;
+		fp = frame->fp;
+		pc = ftrace_graph_ret_addr(current, NULL, frame->ra,
+					   (unsigned long *)(fp - 8));
+	}
+}
+
+#else /* !CONFIG_FRAME_POINTER */
+
+static void notrace walk_stackframe(struct task_struct *task,
+	struct pt_regs *regs, bool (*fn)(unsigned long, void *), void *arg)
+{
+	unsigned long sp, pc;
+	unsigned long *ksp;
+
+	if (regs) {
+		sp = user_stack_pointer(regs);
+		pc = instruction_pointer(regs);
+	} else if (task == NULL || task == current) {
+		const register unsigned long current_sp __asm__ ("sp");
+		sp = current_sp;
+		pc = (unsigned long)walk_stackframe;
+	} else {
+		/* task blocked in __switch_to */
+		sp = thread_saved_sp(task);
+		pc = thread_saved_lr(task);
+	}
+
+	if (unlikely(sp & 0x3))
+		return;
+
+	ksp = (unsigned long *)sp;
+	while (!kstack_end(ksp)) {
+		if (__kernel_text_address(pc) && unlikely(fn(pc, arg)))
+			break;
+		pc = (*ksp++) - 0x4;
+	}
+}
+#endif /* CONFIG_FRAME_POINTER */
+
+static bool print_trace_address(unsigned long pc, void *arg)
+{
+	print_ip_sym(pc);
+	return false;
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	pr_cont("Call Trace:\n");
+	walk_stackframe(task, NULL, print_trace_address, NULL);
+}
+
+static bool save_wchan(unsigned long pc, void *arg)
+{
+	if (!in_sched_functions(pc)) {
+		unsigned long *p = arg;
+		*p = pc;
+		return true;
+	}
+	return false;
+}
+
+unsigned long get_wchan(struct task_struct *task)
+{
+	unsigned long pc = 0;
+
+	if (likely(task && task != current && task->state != TASK_RUNNING))
+		walk_stackframe(task, NULL, save_wchan, &pc);
+	return pc;
+}
+
+#ifdef CONFIG_STACKTRACE
+static bool __save_trace(unsigned long pc, void *arg, bool nosched)
+{
+	struct stack_trace *trace = arg;
+
+	if (unlikely(nosched && in_sched_functions(pc)))
+		return false;
+	if (unlikely(trace->skip > 0)) {
+		trace->skip--;
+		return false;
+	}
+
+	trace->entries[trace->nr_entries++] = pc;
+	return (trace->nr_entries >= trace->max_entries);
+}
+
+static bool save_trace(unsigned long pc, void *arg)
+{
+	return __save_trace(pc, arg, false);
+}
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	walk_stackframe(tsk, NULL, save_trace, trace);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
 
 void save_stack_trace(struct stack_trace *trace)
 {
-	save_stack_trace_tsk(current, trace);
+	save_stack_trace_tsk(NULL, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+#endif /* CONFIG_STACKTRACE */
-{
-	unsigned long *fp, *stack_start, *stack_end;
-	unsigned long addr;
-	int skip = trace->skip;
-	int savesched;
-	int graph_idx = 0;
-
-	if (tsk == current) {
-		asm volatile("mov %0, r8\n":"=r"(fp));
-		savesched = 1;
-	} else {
-		fp = (unsigned long *)thread_saved_fp(tsk);
-		savesched = 0;
-	}
-
-	addr = (unsigned long) fp & THREAD_MASK;
-	stack_start = (unsigned long *) addr;
-	stack_end = (unsigned long *) (addr + THREAD_SIZE);
-
-	while (fp > stack_start && fp < stack_end) {
-		unsigned long lpp, fpp;
-
-		fpp = fp[0];
-		lpp = fp[1];
-		if (!__kernel_text_address(lpp))
-			break;
-		else
-			lpp = ftrace_graph_ret_addr(tsk, &graph_idx, lpp, NULL);
-
-		if (savesched || !in_sched_functions(lpp)) {
-			if (skip) {
-				skip--;
-			} else {
-				trace->entries[trace->nr_entries++] = lpp;
-				if (trace->nr_entries >= trace->max_entries)
-					break;
-			}
-		}
-		fp = (unsigned long *)fpp;
-	}
-}
-EXPORT_SYMBOL_GPL(save_stack_trace_tsk);

arch/csky/lib/usercopy.c

@@ -7,10 +7,7 @@
 unsigned long raw_copy_from_user(void *to, const void *from,
 			unsigned long n)
 {
-	if (access_ok(from, n))
+	___copy_from_user(to, from, n);
-		__copy_user_zeroing(to, from, n);
-	else
-		memset(to, 0, n);
 	return n;
 }
 EXPORT_SYMBOL(raw_copy_from_user);
@@ -18,8 +15,7 @@ EXPORT_SYMBOL(raw_copy_from_user);
 unsigned long raw_copy_to_user(void *to, const void *from,
 			unsigned long n)
 {
-	if (access_ok(to, n))
+	___copy_to_user(to, from, n);
-		__copy_user(to, from, n);
 	return n;
 }
 EXPORT_SYMBOL(raw_copy_to_user);

arch/powerpc/include/asm/book3s/32/kup.h

@@ -75,7 +75,7 @@
 
 .macro kuap_check	current, gpr
 #ifdef CONFIG_PPC_KUAP_DEBUG
-	lwz	\gpr2, KUAP(thread)
+	lwz	\gpr, KUAP(thread)
 999:	twnei	\gpr, 0
 	EMIT_BUG_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE)
 #endif

arch/powerpc/include/asm/hw_irq.h

@@ -250,9 +250,27 @@ static inline bool arch_irqs_disabled(void)
 	}								\
 } while(0)
 
+static inline bool __lazy_irq_pending(u8 irq_happened)
+{
+	return !!(irq_happened & ~PACA_IRQ_HARD_DIS);
+}
+
+/*
+ * Check if a lazy IRQ is pending. Should be called with IRQs hard disabled.
+ */
 static inline bool lazy_irq_pending(void)
 {
-	return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS);
+	return __lazy_irq_pending(get_paca()->irq_happened);
+}
+
+/*
+ * Check if a lazy IRQ is pending, with no debugging checks.
+ * Should be called with IRQs hard disabled.
+ * For use in RI disabled code or other constrained situations.
+ */
+static inline bool lazy_irq_pending_nocheck(void)
+{
+	return __lazy_irq_pending(local_paca->irq_happened);
 }
 
 /*

arch/powerpc/include/asm/uaccess.h

@@ -166,13 +166,17 @@ do {								\
 ({								\
 	long __pu_err;						\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = (x);			\
+	__typeof__(size) __pu_size = (size);			\
+								\
 	if (!is_kernel_addr((unsigned long)__pu_addr))		\
 		might_fault();					\
-	__chk_user_ptr(ptr);					\
+	__chk_user_ptr(__pu_addr);				\
 	if (do_allow)								\
-		__put_user_size((x), __pu_addr, (size), __pu_err);		\
+		__put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err);	\
 	else									\
-		__put_user_size_allowed((x), __pu_addr, (size), __pu_err);	\
+		__put_user_size_allowed(__pu_val, __pu_addr, __pu_size, __pu_err); \
+								\
 	__pu_err;						\
 })
 
@@ -180,9 +184,13 @@ do {								\
 ({									\
 	long __pu_err = -EFAULT;					\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	__typeof__(size) __pu_size = (size);				\
+									\
 	might_fault();							\
-	if (access_ok(__pu_addr, size))			\
+	if (access_ok(__pu_addr, __pu_size))				\
-		__put_user_size((x), __pu_addr, (size), __pu_err);	\
+		__put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
+									\
 	__pu_err;							\
 })
 
@@ -190,8 +198,12 @@ do {								\
 ({								\
 	long __pu_err;						\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	__chk_user_ptr(ptr);					\
+	__typeof__(*(ptr)) __pu_val = (x);			\
-	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__typeof__(size) __pu_size = (size);			\
+								\
+	__chk_user_ptr(__pu_addr);				\
+	__put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
+								\
 	__pu_err;						\
 })
 
@@ -283,15 +295,18 @@ do {								\
 	long __gu_err;						\
 	__long_type(*(ptr)) __gu_val;				\
 	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
+	__typeof__(size) __gu_size = (size);			\
+								\
+	__chk_user_ptr(__gu_addr);				\
 	if (!is_kernel_addr((unsigned long)__gu_addr))		\
 		might_fault();					\
 	barrier_nospec();					\
 	if (do_allow)								\
-		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);		\
+		__get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err);	\
 	else									\
-		__get_user_size_allowed(__gu_val, __gu_addr, (size), __gu_err);	\
+		__get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
 	(x) = (__typeof__(*(ptr)))__gu_val;			\
+								\
 	__gu_err;						\
 })
 
@@ -300,12 +315,15 @@ do {								\
 	long __gu_err = -EFAULT;					\
 	__long_type(*(ptr)) __gu_val = 0;				\
 	__typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	__typeof__(size) __gu_size = (size);				\
+									\
 	might_fault();							\
-	if (access_ok(__gu_addr, (size))) {		\
+	if (access_ok(__gu_addr, __gu_size)) {				\
 		barrier_nospec();					\
-		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+		__get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
 	}								\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;				\
+									\
 	__gu_err;							\
 })
 
@@ -314,10 +332,13 @@ do {								\
 	long __gu_err;						\
 	__long_type(*(ptr)) __gu_val;				\
 	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
+	__typeof__(size) __gu_size = (size);			\
+								\
+	__chk_user_ptr(__gu_addr);				\
 	barrier_nospec();					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	__get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
+								\
 	__gu_err;						\
 })
 

arch/powerpc/kernel/entry_64.S

@@ -472,15 +472,17 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 #ifdef CONFIG_PPC_BOOK3S
 	/*
 	 * If MSR EE/RI was never enabled, IRQs not reconciled, NVGPRs not
-	 * touched, AMR not set, no exit work created, then this can be used.
+	 * touched, no exit work created, then this can be used.
 	 */
 	.balign IFETCH_ALIGN_BYTES
 	.globl fast_interrupt_return
 fast_interrupt_return:
 _ASM_NOKPROBE_SYMBOL(fast_interrupt_return)
+	kuap_check_amr r3, r4
 	ld	r4,_MSR(r1)
 	andi.	r0,r4,MSR_PR
 	bne	.Lfast_user_interrupt_return
+	kuap_restore_amr r3
 	andi.	r0,r4,MSR_RI
 	li	r3,0 /* 0 return value, no EMULATE_STACK_STORE */
 	bne+	.Lfast_kernel_interrupt_return

arch/powerpc/kernel/exceptions-64s.S

@@ -971,6 +971,7 @@ EXC_COMMON_BEGIN(system_reset_common)
 	ld	r10,SOFTE(r1)
 	stb	r10,PACAIRQSOFTMASK(r13)
 
+	kuap_restore_amr r10
 	EXCEPTION_RESTORE_REGS
 	RFI_TO_USER_OR_KERNEL
 

arch/powerpc/kernel/head_40x.S

@@ -344,8 +344,9 @@ _ENTRY(saved_ksp_limit)
 /* 0x0C00 - System Call Exception */
 	START_EXCEPTION(0x0C00,	SystemCall)
 	SYSCALL_ENTRY	0xc00
+/*	Trap_0D is commented out to get more space for system call exception */
 
-	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD)
+/*	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD) */
 	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_STD)
 	EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_STD)
 

arch/powerpc/kernel/ima_arch.c

@@ -19,12 +19,12 @@ bool arch_ima_get_secureboot(void)
  * to be stored as an xattr or as an appended signature.
  *
  * To avoid duplicate signature verification as much as possible, the IMA
- * policy rule for module appraisal is added only if CONFIG_MODULE_SIG_FORCE
+ * policy rule for module appraisal is added only if CONFIG_MODULE_SIG
  * is not enabled.
  */
 static const char *const secure_rules[] = {
 	"appraise func=KEXEC_KERNEL_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig",
-#ifndef CONFIG_MODULE_SIG_FORCE
+#ifndef CONFIG_MODULE_SIG
 	"appraise func=MODULE_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig",
 #endif
 	NULL
@@ -50,7 +50,7 @@ static const char *const secure_and_trusted_rules[] = {
 	"measure func=KEXEC_KERNEL_CHECK template=ima-modsig",
 	"measure func=MODULE_CHECK template=ima-modsig",
 	"appraise func=KEXEC_KERNEL_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig",
-#ifndef CONFIG_MODULE_SIG_FORCE
+#ifndef CONFIG_MODULE_SIG
 	"appraise func=MODULE_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig",
 #endif
 	NULL

arch/powerpc/kernel/syscall_64.c

@@ -35,6 +35,8 @@ notrace long system_call_exception(long r3, long r4, long r5,
 	BUG_ON(!FULL_REGS(regs));
 	BUG_ON(regs->softe != IRQS_ENABLED);
 
+	kuap_check_amr();
+
 	account_cpu_user_entry();
 
 #ifdef CONFIG_PPC_SPLPAR
@@ -47,8 +49,6 @@ notrace long system_call_exception(long r3, long r4, long r5,
 	}
 #endif
 
-	kuap_check_amr();
-
 	/*
 	 * This is not required for the syscall exit path, but makes the
 	 * stack frame look nicer. If this was initialised in the first stack
@@ -117,6 +117,8 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3,
 	unsigned long ti_flags;
 	unsigned long ret = 0;
 
+	kuap_check_amr();
+
 	regs->result = r3;
 
 	/* Check whether the syscall is issued inside a restartable sequence */
@@ -189,7 +191,7 @@ again:
 
 	/* This pattern matches prep_irq_for_idle */
 	__hard_EE_RI_disable();
-	if (unlikely(lazy_irq_pending())) {
+	if (unlikely(lazy_irq_pending_nocheck())) {
 		__hard_RI_enable();
 		trace_hardirqs_off();
 		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
@@ -204,8 +206,6 @@ again:
 	local_paca->tm_scratch = regs->msr;
 #endif
 
-	kuap_check_amr();
-
 	account_cpu_user_exit();
 
 	return ret;
@@ -228,6 +228,8 @@ notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs, unsigned
 	BUG_ON(!FULL_REGS(regs));
 	BUG_ON(regs->softe != IRQS_ENABLED);
 
+	kuap_check_amr();
+
 	local_irq_save(flags);
 
 again:
@@ -264,7 +266,7 @@ again:
 
 	trace_hardirqs_on();
 	__hard_EE_RI_disable();
-	if (unlikely(lazy_irq_pending())) {
+	if (unlikely(lazy_irq_pending_nocheck())) {
 		__hard_RI_enable();
 		trace_hardirqs_off();
 		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
@@ -292,8 +294,6 @@ again:
 	local_paca->tm_scratch = regs->msr;
 #endif
 
-	kuap_check_amr();
-
 	account_cpu_user_exit();
 
 	return ret;
@@ -313,6 +313,8 @@ notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs, unsign
 	BUG_ON(regs->msr & MSR_PR);
 	BUG_ON(!FULL_REGS(regs));
 
+	kuap_check_amr();
+
 	if (unlikely(*ti_flagsp & _TIF_EMULATE_STACK_STORE)) {
 		clear_bits(_TIF_EMULATE_STACK_STORE, ti_flagsp);
 		ret = 1;
@@ -334,7 +336,7 @@ again:
 
 		trace_hardirqs_on();
 		__hard_EE_RI_disable();
-		if (unlikely(lazy_irq_pending())) {
+		if (unlikely(lazy_irq_pending_nocheck())) {
 			__hard_RI_enable();
 			irq_soft_mask_set(IRQS_ALL_DISABLED);
 			trace_hardirqs_off();

arch/powerpc/kernel/vdso32/gettimeofday.S

@@ -218,11 +218,11 @@ V_FUNCTION_BEGIN(__kernel_clock_getres)
 	blr
 
 	/*
-	 * invalid clock
+	 * syscall fallback
 	 */
 99:
-	li	r3, EINVAL
+	li	r0,__NR_clock_getres
-	crset	so
+	sc
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_clock_getres)

arch/riscv/Kconfig

@@ -54,7 +54,7 @@ config RISCV
 	select GENERIC_ARCH_TOPOLOGY if SMP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_MMIOWB
-	select ARCH_HAS_DEBUG_VIRTUAL
+	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select HAVE_EBPF_JIT if MMU
 	select EDAC_SUPPORT
 	select ARCH_HAS_GIGANTIC_PAGE
@@ -136,6 +136,7 @@ config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
 config SYS_SUPPORTS_HUGETLBFS
+	depends on MMU
 	def_bool y
 
 config STACKTRACE_SUPPORT

arch/riscv/Kconfig.socs

@@ -11,14 +11,15 @@ config SOC_SIFIVE
 	  This enables support for SiFive SoC platform hardware.
 
 config SOC_VIRT
-       bool "QEMU Virt Machine"
+	bool "QEMU Virt Machine"
-       select POWER_RESET_SYSCON
+	select POWER_RESET
-       select POWER_RESET_SYSCON_POWEROFF
+	select POWER_RESET_SYSCON
-       select GOLDFISH
+	select POWER_RESET_SYSCON_POWEROFF
-       select RTC_DRV_GOLDFISH
+	select GOLDFISH
-       select SIFIVE_PLIC
+	select RTC_DRV_GOLDFISH if RTC_CLASS
-       help
+	select SIFIVE_PLIC
-         This enables support for QEMU Virt Machine.
+	help
+	  This enables support for QEMU Virt Machine.
 
 config SOC_KENDRYTE
 	bool "Kendryte K210 SoC"

arch/riscv/include/asm/mmio.h

@@ -16,6 +16,8 @@
 
 #ifndef CONFIG_MMU
 #define pgprot_noncached(x)	(x)
+#define pgprot_writecombine(x)	(x)
+#define pgprot_device(x)	(x)
 #endif /* CONFIG_MMU */
 
 /* Generic IO read/write.  These perform native-endian accesses. */

arch/riscv/include/asm/mmiowb.h

@@ -9,6 +9,7 @@
  */
 #define mmiowb()	__asm__ __volatile__ ("fence o,w" : : : "memory");
 
+#include <linux/smp.h>
 #include <asm-generic/mmiowb.h>
 
 #endif	/* _ASM_RISCV_MMIOWB_H */

arch/riscv/include/asm/perf_event.h

@@ -12,19 +12,14 @@
 #include <linux/ptrace.h>
 #include <linux/interrupt.h>
 
+#ifdef CONFIG_RISCV_BASE_PMU
 #define RISCV_BASE_COUNTERS	2
 
 /*
  * The RISCV_MAX_COUNTERS parameter should be specified.
  */
 
-#ifdef CONFIG_RISCV_BASE_PMU
 #define RISCV_MAX_COUNTERS	2
-#endif
-
-#ifndef RISCV_MAX_COUNTERS
-#error "Please provide a valid RISCV_MAX_COUNTERS for the PMU."
-#endif
 
 /*
  * These are the indexes of bits in counteren register *minus* 1,
@@ -82,6 +77,7 @@ struct riscv_pmu {
 	int		irq;
 };
 
+#endif
 #ifdef CONFIG_PERF_EVENTS
 #define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs
 #endif

arch/riscv/include/asm/pgtable.h

@@ -470,12 +470,15 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
 
 #else /* CONFIG_MMU */
 
+#define PAGE_SHARED		__pgprot(0)
 #define PAGE_KERNEL		__pgprot(0)
 #define swapper_pg_dir		NULL
 #define VMALLOC_START		0
 
 #define TASK_SIZE 0xffffffffUL
 
+static inline void __kernel_map_pages(struct page *page, int numpages, int enable) {}
+
 #endif /* !CONFIG_MMU */
 
 #define kern_addr_valid(addr)   (1) /* FIXME */