pinctrl: samsung: Switch to use for_each_gpiochip_node() helper

Switch the code to use for_each_gpiochip_node() helper.

While at it, in order to avoid additional churn in the future,
switch to fwnode APIs where it makes sense.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

drivers/pinctrl/samsung/pinctrl-exynos.c

@@ -307,7 +307,7 @@ __init int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
 		}
 		bank->irq_chip->chip.name = bank->name;
 
-		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+		bank->irq_domain = irq_domain_create_linear(bank->fwnode,
 				bank->nr_pins, &exynos_eint_irqd_ops, bank);
 		if (!bank->irq_domain) {
 			dev_err(dev, "gpio irq domain add failed\n");
@@ -565,7 +565,7 @@ __init int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 		}
 		bank->irq_chip->chip.name = bank->name;
 
-		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+		bank->irq_domain = irq_domain_create_linear(bank->fwnode,
 				bank->nr_pins, &exynos_eint_irqd_ops, bank);
 		if (!bank->irq_domain) {
 			dev_err(dev, "wkup irq domain add failed\n");
@@ -573,7 +573,7 @@ __init int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 			return -ENXIO;
 		}
 
-		if (!of_find_property(bank->of_node, "interrupts", NULL)) {
+		if (!fwnode_property_present(bank->fwnode, "interrupts")) {
 			bank->eint_type = EINT_TYPE_WKUP_MUX;
 			++muxed_banks;
 			continue;
@@ -588,7 +588,7 @@ __init int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 		}
 
 		for (idx = 0; idx < bank->nr_pins; ++idx) {
-			irq = irq_of_parse_and_map(bank->of_node, idx);
+			irq = irq_of_parse_and_map(to_of_node(bank->fwnode), idx);
 			if (!irq) {
 				dev_err(dev, "irq number for eint-%s-%d not found\n",
 							bank->name, idx);

drivers/pinctrl/samsung/pinctrl-s3c24xx.c

@@ -525,7 +525,7 @@ static int s3c24xx_eint_init(struct samsung_pinctrl_drv_data *d)
 		ops = (bank->eint_offset == 0) ? &s3c24xx_gpf_irq_ops
 					       : &s3c24xx_gpg_irq_ops;
 
-		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+		bank->irq_domain = irq_domain_create_linear(bank->fwnode,
 				bank->nr_pins, ops, ddata);
 		if (!bank->irq_domain) {
 			dev_err(dev, "wkup irq domain add failed\n");

drivers/pinctrl/samsung/pinctrl-s3c64xx.c

@@ -471,7 +471,7 @@ static int s3c64xx_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
 		mask = bank->eint_mask;
 		nr_eints = fls(mask);
 
-		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+		bank->irq_domain = irq_domain_create_linear(bank->fwnode,
 					nr_eints, &s3c64xx_gpio_irqd_ops, bank);
 		if (!bank->irq_domain) {
 			dev_err(dev, "gpio irq domain add failed\n");
@@ -743,7 +743,7 @@ static int s3c64xx_eint_eint0_init(struct samsung_pinctrl_drv_data *d)
 			return -ENOMEM;
 		ddata->bank = bank;
 
-		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+		bank->irq_domain = irq_domain_create_linear(bank->fwnode,
 				nr_eints, &s3c64xx_eint0_irqd_ops, ddata);
 		if (!bank->irq_domain) {
 			dev_err(dev, "wkup irq domain add failed\n");

drivers/pinctrl/samsung/pinctrl-samsung.c

@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/gpio/driver.h>
@@ -966,7 +967,7 @@ static int samsung_gpiolib_register(struct platform_device *pdev,
 		gc->base = bank->grange.base;
 		gc->ngpio = bank->nr_pins;
 		gc->parent = &pdev->dev;
-		gc->of_node = bank->of_node;
+		gc->fwnode = bank->fwnode;
 		gc->label = bank->name;
 
 		ret = devm_gpiochip_add_data(&pdev->dev, gc, bank);
@@ -1009,7 +1010,7 @@ static void samsung_banks_node_put(struct samsung_pinctrl_drv_data *d)
 
 	bank = d->pin_banks;
 	for (i = 0; i < d->nr_banks; ++i, ++bank)
-		of_node_put(bank->of_node);
+		fwnode_handle_put(bank->fwnode);
 }
 
 /*
@@ -1020,8 +1021,7 @@ static void samsung_banks_node_get(struct device *dev, struct samsung_pinctrl_dr
 {
 	const char *suffix = "-gpio-bank";
 	struct samsung_pin_bank *bank;
-	struct device_node *node = dev->of_node;
-	struct device_node *child;
+	struct fwnode_handle *child;
 	/* Pin bank names are up to 4 characters */
 	char node_name[20];
 	unsigned int i;
@@ -1037,17 +1037,17 @@ static void samsung_banks_node_get(struct device *dev, struct samsung_pinctrl_dr
 			continue;
 		}
 
-		for_each_child_of_node(node, child) {
-			if (!of_find_property(child, "gpio-controller", NULL))
-				continue;
-			if (of_node_name_eq(child, node_name))
+		for_each_gpiochip_node(dev, child) {
+			struct device_node *np = to_of_node(child);
+
+			if (of_node_name_eq(np, node_name))
 				break;
-			else if (of_node_name_eq(child, bank->name))
+			if (of_node_name_eq(np, bank->name))
 				break;
 		}
 
 		if (child)
-			bank->of_node = child;
+			bank->fwnode = child;
 		else
 			dev_warn(dev, "Missing node for bank %s - invalid DTB\n",
 				 bank->name);

drivers/pinctrl/samsung/pinctrl-samsung.h

@@ -165,7 +165,7 @@ struct samsung_pin_bank {
 
 	u32		pin_base;
 	void		*soc_priv;
-	struct device_node *of_node;
+	struct fwnode_handle *fwnode;
 	struct samsung_pinctrl_drv_data *drvdata;
 	struct irq_domain *irq_domain;
 	struct gpio_chip gpio_chip;