regulator: Fairchild fan53555 support
This driver supports Fairchild FAN53555 Digitally Programmable TinyBuck Regulator. The FAN53555 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Yunfan Zhang
Mark Brown
Родитель
029dd3cefa
Коммит
49d8c59927
|
|
@ -110,6 +110,17 @@ config REGULATOR_DA9052
|
|||
This driver supports the voltage regulators of DA9052-BC and
|
||||
DA9053-AA/Bx PMIC.
|
||||
|
||||
config REGULATOR_FAN53555
|
||||
tristate "Fairchild FAN53555 Regulator"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports Fairchild FAN53555 Digitally Programmable
|
||||
TinyBuck Regulator. The FAN53555 is a step-down switching voltage
|
||||
regulator that delivers a digitally programmable output from an
|
||||
input voltage supply of 2.5V to 5.5V. The output voltage is
|
||||
programmed through an I2C interface.
|
||||
|
||||
config REGULATOR_ANATOP
|
||||
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
|
||||
depends on MFD_ANATOP
|
||||
|
|
|
|||
|
|
@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
|
|||
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
|
||||
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
|
||||
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
|
||||
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,325 @@
|
|||
/*
|
||||
* FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver.
|
||||
*
|
||||
* Supported Part Numbers:
|
||||
* FAN53555UC00X/01X/03X/04X/05X
|
||||
*
|
||||
* Copyright (c) 2012 Marvell Technology Ltd.
|
||||
* Yunfan Zhang <yfzhang@marvell.com>
|
||||
*
|
||||
* This package is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/param.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/fan53555.h>
|
||||
|
||||
/* Voltage setting */
|
||||
#define FAN53555_VSEL0 0x00
|
||||
#define FAN53555_VSEL1 0x01
|
||||
/* Control register */
|
||||
#define FAN53555_CONTROL 0x02
|
||||
/* IC Type */
|
||||
#define FAN53555_ID1 0x03
|
||||
/* IC mask version */
|
||||
#define FAN53555_ID2 0x04
|
||||
/* Monitor register */
|
||||
#define FAN53555_MONITOR 0x05
|
||||
|
||||
/* VSEL bit definitions */
|
||||
#define VSEL_BUCK_EN (1 << 7)
|
||||
#define VSEL_MODE (1 << 6)
|
||||
#define VSEL_NSEL_MASK 0x3F
|
||||
/* Chip ID and Verison */
|
||||
#define DIE_ID 0x0F /* ID1 */
|
||||
#define DIE_REV 0x0F /* ID2 */
|
||||
/* Control bit definitions */
|
||||
#define CTL_OUTPUT_DISCHG (1 << 7)
|
||||
#define CTL_SLEW_MASK (0x7 << 4)
|
||||
#define CTL_SLEW_SHIFT 4
|
||||
#define CTL_RESET (1 << 2)
|
||||
|
||||
#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
|
||||
|
||||
/* IC Type */
|
||||
enum {
|
||||
FAN53555_CHIP_ID_00 = 0,
|
||||
FAN53555_CHIP_ID_01,
|
||||
FAN53555_CHIP_ID_02,
|
||||
FAN53555_CHIP_ID_03,
|
||||
FAN53555_CHIP_ID_04,
|
||||
FAN53555_CHIP_ID_05,
|
||||
};
|
||||
|
||||
struct fan53555_device_info {
|
||||
struct regmap *regmap;
|
||||
struct device *dev;
|
||||
struct regulator_desc desc;
|
||||
struct regulator_dev *rdev;
|
||||
struct regulator_init_data *regulator;
|
||||
/* IC Type and Rev */
|
||||
int chip_id;
|
||||
int chip_rev;
|
||||
/* Voltage setting register */
|
||||
unsigned int vol_reg;
|
||||
unsigned int sleep_reg;
|
||||
/* Voltage range and step(linear) */
|
||||
unsigned int vsel_min;
|
||||
unsigned int vsel_max;
|
||||
unsigned int vsel_step;
|
||||
/* Voltage slew rate limiting */
|
||||
unsigned int slew_rate;
|
||||
/* Sleep voltage cache */
|
||||
unsigned int sleep_vol_cache;
|
||||
};
|
||||
|
||||
static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
||||
{
|
||||
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
|
||||
int ret;
|
||||
|
||||
if (di->sleep_vol_cache == uV)
|
||||
return 0;
|
||||
ret = regulator_map_voltage_linear(rdev, uV, uV);
|
||||
if (ret < 0)
|
||||
return -EINVAL;
|
||||
ret = regmap_update_bits(di->regmap, di->sleep_reg,
|
||||
VSEL_NSEL_MASK, ret);
|
||||
if (ret < 0)
|
||||
return -EINVAL;
|
||||
/* Cache the sleep voltage setting.
|
||||
* Might not be the real voltage which is rounded */
|
||||
di->sleep_vol_cache = uV;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_FAST:
|
||||
regmap_update_bits(di->regmap, di->vol_reg,
|
||||
VSEL_MODE, VSEL_MODE);
|
||||
break;
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
|
||||
unsigned int val;
|
||||
int ret = 0;
|
||||
|
||||
ret = regmap_read(di->regmap, di->vol_reg, &val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
if (val & VSEL_MODE)
|
||||
return REGULATOR_MODE_FAST;
|
||||
else
|
||||
return REGULATOR_MODE_NORMAL;
|
||||
}
|
||||
|
||||
static struct regulator_ops fan53555_regulator_ops = {
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.set_suspend_voltage = fan53555_set_suspend_voltage,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.set_mode = fan53555_set_mode,
|
||||
.get_mode = fan53555_get_mode,
|
||||
};
|
||||
|
||||
/* For 00,01,03,05 options:
|
||||
* VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
|
||||
* For 04 option:
|
||||
* VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V.
|
||||
* */
|
||||
static int fan53555_device_setup(struct fan53555_device_info *di,
|
||||
struct fan53555_platform_data *pdata)
|
||||
{
|
||||
unsigned int reg, data, mask;
|
||||
|
||||
/* Setup voltage control register */
|
||||
switch (pdata->sleep_vsel_id) {
|
||||
case FAN53555_VSEL_ID_0:
|
||||
di->sleep_reg = FAN53555_VSEL0;
|
||||
di->vol_reg = FAN53555_VSEL1;
|
||||
break;
|
||||
case FAN53555_VSEL_ID_1:
|
||||
di->sleep_reg = FAN53555_VSEL1;
|
||||
di->vol_reg = FAN53555_VSEL0;
|
||||
break;
|
||||
default:
|
||||
dev_err(di->dev, "Invalid VSEL ID!\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
/* Init voltage range and step */
|
||||
switch (di->chip_id) {
|
||||
case FAN53555_CHIP_ID_00:
|
||||
case FAN53555_CHIP_ID_01:
|
||||
case FAN53555_CHIP_ID_03:
|
||||
case FAN53555_CHIP_ID_05:
|
||||
di->vsel_min = 600000;
|
||||
di->vsel_max = 1230000;
|
||||
di->vsel_step = 10000;
|
||||
break;
|
||||
case FAN53555_CHIP_ID_04:
|
||||
di->vsel_min = 603000;
|
||||
di->vsel_max = 1411000;
|
||||
di->vsel_step = 12826;
|
||||
break;
|
||||
default:
|
||||
dev_err(di->dev,
|
||||
"Chip ID[%d]\n not supported!\n", di->chip_id);
|
||||
return -EINVAL;
|
||||
}
|
||||
/* Init slew rate */
|
||||
if (pdata->slew_rate & 0x7)
|
||||
di->slew_rate = pdata->slew_rate;
|
||||
else
|
||||
di->slew_rate = FAN53555_SLEW_RATE_64MV;
|
||||
reg = FAN53555_CONTROL;
|
||||
data = di->slew_rate << CTL_SLEW_SHIFT;
|
||||
mask = CTL_SLEW_MASK;
|
||||
return regmap_update_bits(di->regmap, reg, mask, data);
|
||||
}
|
||||
|
||||
static int fan53555_regulator_register(struct fan53555_device_info *di,
|
||||
struct regulator_config *config)
|
||||
{
|
||||
struct regulator_desc *rdesc = &di->desc;
|
||||
|
||||
rdesc->name = "fan53555-reg";
|
||||
rdesc->ops = &fan53555_regulator_ops;
|
||||
rdesc->type = REGULATOR_VOLTAGE;
|
||||
rdesc->n_voltages = FAN53555_NVOLTAGES;
|
||||
rdesc->enable_reg = di->vol_reg;
|
||||
rdesc->enable_mask = VSEL_BUCK_EN;
|
||||
rdesc->min_uV = di->vsel_min;
|
||||
rdesc->uV_step = di->vsel_step;
|
||||
rdesc->vsel_reg = di->vol_reg;
|
||||
rdesc->vsel_mask = VSEL_NSEL_MASK;
|
||||
rdesc->owner = THIS_MODULE;
|
||||
|
||||
di->rdev = regulator_register(&di->desc, config);
|
||||
if (IS_ERR(di->rdev))
|
||||
return PTR_ERR(di->rdev);
|
||||
return 0;
|
||||
|
||||
}
|
||||
|
||||
static struct regmap_config fan53555_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
};
|
||||
|
||||
static int __devinit fan53555_regulator_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct fan53555_device_info *di;
|
||||
struct fan53555_platform_data *pdata;
|
||||
struct regulator_config config = { };
|
||||
unsigned int val;
|
||||
int ret;
|
||||
|
||||
pdata = client->dev.platform_data;
|
||||
if (!pdata || !pdata->regulator) {
|
||||
dev_err(&client->dev, "Platform data not found!\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
|
||||
GFP_KERNEL);
|
||||
if (!di) {
|
||||
dev_err(&client->dev, "Failed to allocate device info data!\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
|
||||
if (IS_ERR(di->regmap)) {
|
||||
dev_err(&client->dev, "Failed to allocate regmap!\n");
|
||||
return PTR_ERR(di->regmap);
|
||||
}
|
||||
di->dev = &client->dev;
|
||||
di->regulator = pdata->regulator;
|
||||
i2c_set_clientdata(client, di);
|
||||
/* Get chip ID */
|
||||
ret = regmap_read(di->regmap, FAN53555_ID1, &val);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Failed to get chip ID!\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
di->chip_id = val & DIE_ID;
|
||||
/* Get chip revision */
|
||||
ret = regmap_read(di->regmap, FAN53555_ID2, &val);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Failed to get chip Rev!\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
di->chip_rev = val & DIE_REV;
|
||||
dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n",
|
||||
di->chip_id, di->chip_rev);
|
||||
/* Device init */
|
||||
ret = fan53555_device_setup(di, pdata);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Failed to setup device!\n");
|
||||
return ret;
|
||||
}
|
||||
/* Register regulator */
|
||||
config.dev = di->dev;
|
||||
config.init_data = di->regulator;
|
||||
config.regmap = di->regmap;
|
||||
config.driver_data = di;
|
||||
ret = fan53555_regulator_register(di, &config);
|
||||
if (ret < 0)
|
||||
dev_err(&client->dev, "Failed to register regulator!\n");
|
||||
return ret;
|
||||
|
||||
}
|
||||
|
||||
static int __devexit fan53555_regulator_remove(struct i2c_client *client)
|
||||
{
|
||||
struct fan53555_device_info *di = i2c_get_clientdata(client);
|
||||
|
||||
regulator_unregister(di->rdev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id fan53555_id[] = {
|
||||
{"fan53555", -1},
|
||||
{ },
|
||||
};
|
||||
|
||||
static struct i2c_driver fan53555_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "fan53555-regulator",
|
||||
},
|
||||
.probe = fan53555_regulator_probe,
|
||||
.remove = __devexit_p(fan53555_regulator_remove),
|
||||
.id_table = fan53555_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(fan53555_regulator_driver);
|
||||
|
||||
MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>");
|
||||
MODULE_DESCRIPTION("FAN53555 regulator driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
/*
|
||||
* fan53555.h - Fairchild Regulator FAN53555 Driver
|
||||
*
|
||||
* Copyright (C) 2012 Marvell Technology Ltd.
|
||||
* Yunfan Zhang <yfzhang@marvell.com>
|
||||
*
|
||||
* This package is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __FAN53555_H__
|
||||
|
||||
/* VSEL ID */
|
||||
enum {
|
||||
FAN53555_VSEL_ID_0 = 0,
|
||||
FAN53555_VSEL_ID_1,
|
||||
};
|
||||
|
||||
/* Transition slew rate limiting from a low to high voltage.
|
||||
* -----------------------
|
||||
* Bin |Slew Rate(mV/uS)
|
||||
* ------|----------------
|
||||
* 000 | 64.00
|
||||
* ------|----------------
|
||||
* 001 | 32.00
|
||||
* ------|----------------
|
||||
* 010 | 16.00
|
||||
* ------|----------------
|
||||
* 011 | 8.00
|
||||
* ------|----------------
|
||||
* 100 | 4.00
|
||||
* ------|----------------
|
||||
* 101 | 2.00
|
||||
* ------|----------------
|
||||
* 110 | 1.00
|
||||
* ------|----------------
|
||||
* 111 | 0.50
|
||||
* -----------------------
|
||||
*/
|
||||
enum {
|
||||
FAN53555_SLEW_RATE_64MV = 0,
|
||||
FAN53555_SLEW_RATE_32MV,
|
||||
FAN53555_SLEW_RATE_16MV,
|
||||
FAN53555_SLEW_RATE_8MV,
|
||||
FAN53555_SLEW_RATE_4MV,
|
||||
FAN53555_SLEW_RATE_2MV,
|
||||
FAN53555_SLEW_RATE_1MV,
|
||||
FAN53555_SLEW_RATE_0_5MV,
|
||||
};
|
||||
|
||||
struct fan53555_platform_data {
|
||||
struct regulator_init_data *regulator;
|
||||
unsigned int slew_rate;
|
||||
/* Sleep VSEL ID */
|
||||
unsigned int sleep_vsel_id;
|
||||
};
|
||||
|
||||
#endif /* __FAN53555_H__ */
|
||||
Загрузка…
Ссылка в новой задаче