iio: document bno055 private sysfs attributes

Add ABI documentation for bno055 driver private sysfs attributes.

Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-10-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation/ABI/testing/sysfs-bus-iio-bno055

@@ -0,0 +1,81 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled) range for acceleration readings. Unit after
+		application of scale is m/s^2. Note that this doesn't affects
+		the scale (which should be used when changing the maximum and
+		minimum readable value affects also the reading scaling factor).
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Range for angular velocity readings in radians per second. Note
+		that this does not affects the scale (which should be used when
+		changing the maximum and minimum readable value affects also the
+		reading scaling factor).
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List of allowed values for in_accel_raw_range attribute
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List of allowed values for in_anglvel_raw_range attribute
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Can be 1 or 0. Enables/disables the "Fast Magnetometer
+		Calibration" HW function.
+
+What:		/sys/bus/iio/devices/iio:deviceX/fusion_enable
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a.
+		NDOF) HW function.
+
+What:		/sys/bus/iio/devices/iio:deviceX/calibration_data
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the binary calibration data blob for the IMU sensors.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the autocalibration status for the accelerometer sensor.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the autocalibration status for the gyroscope sensor.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the autocalibration status for the magnetometer sensor.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the status for the IMU overall autocalibration.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.