ASoC: Updates for v4.8

Not really any framework work this time around (though we have seen one
 of the Analog Devices drivers move more to the clock API which is good
 to see) but rather a lot of new drivers:
 
  - Lots of updates for the Intel drivers, mostly board support and bug
    fixing, and to the NAU8825 driver.
  - Work on generalizing bits of simple-card to allow more code sharing
    with the Renesas rsrc-card (which can't use simple-card due to DPCM).
  - Removal of the Odroid X2 driver due to replacement with simple-card.
  - Support for several new Mediatek platforms and associated boards.
  - New drivers for Allwinner A10, Analog Devices ADAU7002, Broadcom
    Cygnus, Cirrus Logic CS35L33 and CS53L30, Maxim MAX8960 and MAX98504,
    Realtek RT5514 and Wolfson WM8758
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXli6yAAoJECTWi3JdVIfQgmkH/RIfbuCuGJCspFNZ3Gv/ORoX
 oRcUILFd/74FRhQ+ax65Vg/Sn1P/p9dSLspRmZt/pjR37vr/b6BlZSLXgCEqVgIr
 OjYi6ixcEeGyfIvWUH77nYgnUGT62XVJPfQC/2r8DsYI2bWw6tQGA/rCE2h9cl0N
 JoeoGghcNoxS7zZzhgoyTX6B1FoQjJiHML6ApOvpGJWr87dPv1nbJHVBrYOPMr4X
 4l/oVzOIVDmhRQtYPAWTXQzDNhVrLPxs8sgd/oV41Jl4gHRW4EPivjUBCWxQKPFy
 Tf98Q7058eqcFn/egO5lsvzC0kQdiKEXpSRfol4VAU6LAvGxAYDbaIh8cBy29P4=
 =nQWb
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.8

Not really any framework work this time around (though we have seen one
of the Analog Devices drivers move more to the clock API which is good
to see) but rather a lot of new drivers:

 - Lots of updates for the Intel drivers, mostly board support and bug
   fixing, and to the NAU8825 driver.
 - Work on generalizing bits of simple-card to allow more code sharing
   with the Renesas rsrc-card (which can't use simple-card due to DPCM).
 - Removal of the Odroid X2 driver due to replacement with simple-card.
 - Support for several new Mediatek platforms and associated boards.
 - New drivers for Allwinner A10, Analog Devices ADAU7002, Broadcom
   Cygnus, Cirrus Logic CS35L33 and CS53L30, Maxim MAX8960 and MAX98504,
   Realtek RT5514 and Wolfson WM8758

Documentation/devicetree/bindings/sound/adi,adau17x1.txt

@@ -13,6 +13,11 @@ Required properties:
  - reg:			The i2c address. Value depends on the state of ADDR0
 			and ADDR1, as wired in hardware.
 
+Optional properties:
+ - clock-names:		If provided must be "mclk".
+ - clocks:		phandle + clock-specifiers for the clock that provides
+			the audio master clock for the device.
+
 Examples:
 #include <dt-bindings/sound/adau17x1.h>
 
@@ -20,5 +25,8 @@ Examples:
 		adau1361@38 {
 			compatible = "adi,adau1761";
 			reg = <0x38>;
+
+			clock-names = "mclk";
+			clocks = <&audio_clock>;
 		};
 	};

Documentation/devicetree/bindings/sound/adi,adau7002.txt

@@ -0,0 +1,19 @@
+Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter
+
+Required properties:
+
+ - compatible: Must be "adi,adau7002"
+
+Optional properties:
+
+ - IOVDD-supply: Phandle and specifier for the power supply providing the IOVDD
+	supply as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+
+	If this property is not present it is assumed that the supply pin is
+	hardwired to always on.
+
+Example:
+	adau7002: pdm-to-i2s {
+		compatible = "adi,adau7002";
+		IOVDD-supply = <&supply>;
+	};

Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt

@@ -0,0 +1,67 @@
+BROADCOM Cygnus Audio I2S/TDM/SPDIF controller
+
+Required properties:
+	- compatible : "brcm,cygnus-audio"
+	- #address-cells: 32bit valued, 1 cell.
+	- #size-cells:  32bit valued, 0 cell.
+	- reg : Should contain audio registers location and length
+	- reg-names: names of the registers listed in "reg" property
+		Valid names are "aud" and "i2s_in". "aud" contains a
+		set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains
+		a set of I2S_IN registers.
+	- clocks: PLL and leaf clocks used by audio ports
+	- assigned-clocks: PLL and leaf clocks
+	- assigned-clock-parents: parent clocks of the assigned clocks
+		(usually the PLL)
+	- assigned-clock-rates: List of clock frequencies of the
+		assigned clocks
+	- clock-names: names of 3 leaf clocks used by audio ports
+		Valid names are "ch0_audio", "ch1_audio", "ch2_audio"
+	- interrupts: audio DMA interrupt number
+
+SSP Subnode properties:
+- reg: The index of ssp port interface to use
+	Valid value are 0, 1, 2, or 3 (for spdif)
+
+Example:
+	cygnus_audio: audio@180ae000 {
+		compatible = "brcm,cygnus-audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>;
+		reg-names = "aud", "i2s_in";
+		clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>,
+				<&audiopll BCM_CYGNUS_AUDIOPLL_CH1>,
+				<&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
+		assigned-clocks = <&audiopll BCM_CYGNUS_AUDIOPLL>,
+							<&audiopll BCM_CYGNUS_AUDIOPLL_CH0>,
+							<&audiopll BCM_CYGNUS_AUDIOPLL_CH1>,
+							<&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
+		assigned-clock-parents = <&audiopll BCM_CYGNUS_AUDIOPLL>;
+		assigned-clock-rates = <1769470191>,
+								<0>,
+								<0>,
+								<0>;
+		clock-names = "ch0_audio", "ch1_audio", "ch2_audio";
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+
+		ssp0: ssp_port@0 {
+			reg = <0>;
+			status = "okay";
+		};
+
+		ssp1: ssp_port@1 {
+			reg = <1>;
+			status = "disabled";
+		};
+
+		ssp2: ssp_port@2 {
+			reg = <2>;
+			status = "disabled";
+		};
+
+		spdif: spdif_port@3 {
+			reg = <3>;
+			status = "disabled";
+		};
+	};

Documentation/devicetree/bindings/sound/bt-sco.txt

@@ -4,7 +4,7 @@ This device support generic Bluetooth SCO link.
 
 Required properties:
 
-  - compatible : "delta,dfbmcs320"
+  - compatible : "delta,dfbmcs320" or "linux,bt-sco"
 
 Example:
 

Documentation/devicetree/bindings/sound/cs35l33.txt

@@ -0,0 +1,126 @@
+CS35L33 Speaker Amplifier
+
+Required properties:
+
+  - compatible : "cirrus,cs35l33"
+
+  - reg : the I2C address of the device for I2C
+
+  - VA-supply, VP-supply : power supplies for the device,
+    as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - reset-gpios : gpio used to reset the amplifier
+
+  - interrupt-parent : Specifies the phandle of the interrupt controller to
+    which the IRQs from CS35L33 are delivered to.
+ -  interrupts : IRQ line info CS35L33.
+    (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+    for further information relating to interrupt properties)
+
+  - cirrus,boost-ctl : Booster voltage use to supply the amp. If the value is
+    0, then VBST = VP. If greater than 0, the boost voltage will be 3300mV with
+    a value of 1 and will increase at a step size of 100mV until a maximum of
+    8000mV.
+
+  - cirrus,ramp-rate : On power up, it affects the time from when the power
+    up sequence begins to the time the audio reaches a full-scale output.
+    On power down, it affects the time from when the power-down sequence
+    begins to when the amplifier disables the PWM outputs. If this property
+    is not set then soft ramping will be disabled and ramp time would be
+    20ms. If this property is set to 0,1,2,3 then ramp times would be 40ms,
+    60ms,100ms,175ms respectively for 48KHz sample rate.
+
+  - cirrus,boost-ipk : The maximum current allowed for the boost converter.
+    The range starts at 1850000uA and goes to a maximum of 3600000uA
+    with a step size of 15625uA. The default is 2500000uA.
+
+  - cirrus,imon-adc-scale : Configures the scaling of data bits from the IMON
+    ADC data word. This property can be set as a value of 0 for bits 15 down
+    to 0, 6 for 21 down to 6, 7, for 22 down to 7, 8 for 23 down to 8.
+
+
+Optional H/G Algorithm sub-node:
+
+The cs35l33 node can have a single "cirrus,hg-algo" sub-node that will enable
+the internal H/G Algorithm.
+
+  - cirrus,hg-algo : Sub-node for internal Class H/G algorithm that
+    controls the amplifier supplies.
+
+Optional properties for the "cirrus,hg-algo" sub-node:
+
+  - cirrus,mem-depth : Memory depth for the Class H/G algorithm measured in
+    LRCLK cycles. If this property is set to 0, 1, 2, or 3 then the memory
+    depths will be 1, 4, 8, 16 LRCLK cycles.  The default is 16 LRCLK cycles.
+
+    cirrus,release-rate : The number of consecutive LRCLK periods before
+    allowing release condition tracking updates. The number of LRCLK periods
+    start at 3 to a maximum of 255.
+
+  - cirrus,ldo-thld : Configures the signal threshold at which the PWM output
+    stage enters LDO operation. Starts as a default value of 50mV for a value
+    of 1 and increases with a step size of 50mV to a maximum of 750mV (value of
+    0xF).
+
+  - cirrus,ldo-path-disable : This is a boolean property. If present, the H/G
+    algorithm uses the max detection path.  If not present, the LDO
+    detection path is used.
+
+  - cirrus,ldo-entry-delay : The LDO entry delay in milliseconds before the H/G
+    algorithm switches to the LDO voltage.  This property can be set to values
+    from 0 to 7 for delays of 5ms, 10ms, 50ms, 100ms, 200ms, 500ms, 1000ms.
+    The default is 100ms.
+
+  - cirrus,vp-hg-auto : This is a boolean property.  When set, class H/G VPhg
+    automatic updating is enabled.
+
+  - cirrus,vp-hg :  Class H/G algorithm VPhg.  Controls the H/G algorithm's
+    reference to the VP voltage for when to start generating a boosted VBST.
+    The reference voltage starts at 3000mV with a value of 0x3 and is increased
+    by 100mV per step to a maximum of 5500mV.
+
+  - cirrus,vp-hg-rate : The rate (number of LRCLK periods) at which the VPhg is
+    allowed to increase to a higher voltage when using VPhg automatic
+    tracking. This property can be set to values from 0 to 3 with rates of 128
+    periods, 2048 periods, 32768 periods, and 524288 periods.
+    The default is 32768 periods.
+
+  - cirrus,vp-hg-va : VA calculation reference for automatic VPhg tracking
+    using VPMON. This property can be set to values from 0 to 6 starting at
+    1800mV with a step size of 50mV up to a maximum value of 1750mV.
+    Default is 1800mV.
+
+Example:
+
+cs35l33: cs35l33@40 {
+	compatible = "cirrus,cs35l33";
+	reg = <0x40>;
+
+	VA-supply = <&ldo5_reg>;
+	VP-supply = <&ldo5_reg>;
+
+	interrupt-parent = <&gpio8>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	reset-gpios = <&cs47l91 34 0>;
+
+	cirrus,ramp-rate = <0x0>;
+	cirrus,boost-ctl = <0x30>;  /* VBST = 8000mV */
+	cirrus,boost-ipk = <0xE0>; /* 3600mA */
+	cirrus,imon-adc-scale = <0> /* Bits 15 down to 0 */
+
+	cirrus,hg-algo {
+		cirrus,mem-depth = <0x3>;
+		cirrus,release-rate = <0x3>;
+		cirrus,ldo-thld = <0x1>;
+		cirrus,ldo-path-disable = <0x0>;
+		cirrus,ldo-entry-delay=<0x4>;
+		cirrus,vp-hg-auto;
+		cirrus,vp-hg=<0xF>;
+		cirrus,vp-hg-rate=<0x2>;
+		cirrus,vp-hg-va=<0x0>;
+	};
+};

Documentation/devicetree/bindings/sound/cs53l30.txt

@@ -0,0 +1,44 @@
+CS53L30 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs53l30"
+
+  - reg : the I2C address of the device
+
+  - VA-supply, VP-supply : power supplies for the device,
+    as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin.
+
+  - mute-gpios : a GPIO spec for the MUTE pin. The active state can be either
+		 GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW, which would be handled
+		 by the driver automatically.
+
+  - cirrus,micbias-lvl : Set the output voltage level on the MICBIAS Pin.
+			 0 = Hi-Z
+			 1 = 1.80 V
+			 2 = 2.75 V
+
+  - cirrus,use-sdout2 : This is a boolean property. If present, it indicates
+			the hardware design connects both SDOUT1 and SDOUT2
+			pins to output data. Otherwise, it indicates that
+			only SDOUT1 is connected for data output.
+			* CS53l30 supports 4-channel data output in the same
+			* frame using two different ways:
+			* 1) Normal I2S mode on two data pins -- each SDOUT
+			*    carries 2-channel data in the same time.
+			* 2) TDM mode on one signle data pin -- SDOUT1 carries
+			*    4-channel data per frame.
+
+Example:
+
+codec: cs53l30@48 {
+	compatible = "cirrus,cs53l30";
+	reg = <0x48>;
+	reset-gpios = <&gpio 54 0>;
+	VA-supply = <&cs53l30_va>;
+	VP-supply = <&cs53l30_vp>;
+};

Documentation/devicetree/bindings/sound/designware-i2s.txt

@@ -12,6 +12,10 @@ Required properties:
    one for receive.
  - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
 
+Optional properties:
+ - interrupts: The interrupt line number for the I2S controller. Add this
+   parameter if the I2S controller that you are using does not support DMA.
+
 For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
 properties please check:
 	* resource-names.txt

Documentation/devicetree/bindings/sound/fsl-asoc-card.txt

@@ -58,7 +58,7 @@ Required properties:
 			   * DMIC (stands for Digital Microphone Jack)
 
 			  Note: The "Mic Jack" and "AMIC" are redundant while
-			        coexsiting in order to support the old bindings
+			        coexisting in order to support the old bindings
 				of wm8962 and sgtl5000.
 
 Optional properties:

Documentation/devicetree/bindings/sound/max98504.txt

@@ -0,0 +1,44 @@
+Maxim MAX98504 class D mono speaker amplifier
+
+This device supports I2C control interface and an IRQ output signal. It features
+a PCM and PDM digital audio interface (DAI) and a differential analog input.
+
+Required properties:
+
+ - compatible : "maxim,max98504"
+ - reg : should contain the I2C slave device address
+ - DVDD-supply, DIOVDD-supply, PVDD-supply: power supplies for the device,
+   as covered in ../regulator/regulator.txt
+ - interrupts : should specify the interrupt line the device is connected to,
+   as described in ../interrupt-controller/interrupts.txt
+
+Optional properties:
+
+ - maxim,brownout-threshold - the PVDD brownout threshold, the value must be
+   from 0, 1...21 range, corresponding to 2.6V, 2.65V...3.65V voltage range
+ - maxim,brownout-attenuation - the brownout attenuation to the speaker gain
+   applied during the "attack hold" and "timed hold" phase, the value must be
+   from 0...6 (dB) range
+ - maxim,brownout-attack-hold-ms - the brownout attack hold phase time in ms,
+   0...255 (VBATBROWN_ATTK_HOLD, register 0x0018)
+ - maxim,brownout-timed-hold-ms - the brownout timed hold phase time in ms,
+   0...255 (VBATBROWN_TIME_HOLD, register 0x0019)
+ - maxim,brownout-release-rate-ms - the brownout release phase step time in ms,
+   0...255 (VBATBROWN_RELEASE, register 0x001A)
+
+The default value when the above properties are not specified is 0,
+the maxim,brownout-threshold property must be specified to actually enable
+the PVDD brownout protection.
+
+Example:
+
+ max98504@31 {
+	compatible = "maxim,max98504";
+	reg = <0x31>;
+	interrupt-parent = <&gpio_bank_0>;
+	interrupts = <2 0>;
+
+	DVDD-supply = <&regulator>;
+	DIOVDD-supply = <&regulator>;
+	PVDD-supply = <&regulator>;
+};

Documentation/devicetree/bindings/sound/max9860.txt

@@ -0,0 +1,28 @@
+MAX9860 Mono Audio Voice Codec
+
+Required properties:
+
+  - compatible : "maxim,max9860"
+
+  - reg : the I2C address of the device
+
+  - AVDD-supply, DVDD-supply and DVDDIO-supply : power supplies for
+    the device, as covered in bindings/regulator/regulator.txt
+
+  - clock-names : Required element: "mclk".
+
+  - clocks : A clock specifier for the clock connected as MCLK.
+
+Examples:
+
+	max9860: max9860@10 {
+		compatible = "maxim,max9860";
+		reg = <0x10>;
+
+		AVDD-supply = <&reg_1v8>;
+		DVDD-supply = <&reg_1v8>;
+		DVDDIO-supply = <&reg_3v0>;
+
+		clock-names = "mclk";
+		clocks = <&pck2>;
+	};

Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt

@@ -0,0 +1,150 @@
+Mediatek AFE PCM controller for mt2701
+
+Required properties:
+- compatible = "mediatek,mt2701-audio";
+- reg: register location and size
+- interrupts: Should contain AFE interrupt
+- clock-names: should have these clock names:
+		"infra_sys_audio_clk",
+		"top_audio_mux1_sel",
+		"top_audio_mux2_sel",
+		"top_audio_mux1_div",
+		"top_audio_mux2_div",
+		"top_audio_48k_timing",
+		"top_audio_44k_timing",
+		"top_audpll_mux_sel",
+		"top_apll_sel",
+		"top_aud1_pll_98M",
+		"top_aud2_pll_90M",
+		"top_hadds2_pll_98M",
+		"top_hadds2_pll_294M",
+		"top_audpll",
+		"top_audpll_d4",
+		"top_audpll_d8",
+		"top_audpll_d16",
+		"top_audpll_d24",
+		"top_audintbus_sel",
+		"clk_26m",
+		"top_syspll1_d4",
+		"top_aud_k1_src_sel",
+		"top_aud_k2_src_sel",
+		"top_aud_k3_src_sel",
+		"top_aud_k4_src_sel",
+		"top_aud_k5_src_sel",
+		"top_aud_k6_src_sel",
+		"top_aud_k1_src_div",
+		"top_aud_k2_src_div",
+		"top_aud_k3_src_div",
+		"top_aud_k4_src_div",
+		"top_aud_k5_src_div",
+		"top_aud_k6_src_div",
+		"top_aud_i2s1_mclk",
+		"top_aud_i2s2_mclk",
+		"top_aud_i2s3_mclk",
+		"top_aud_i2s4_mclk",
+		"top_aud_i2s5_mclk",
+		"top_aud_i2s6_mclk",
+		"top_asm_m_sel",
+		"top_asm_h_sel",
+		"top_univpll2_d4",
+		"top_univpll2_d2",
+		"top_syspll_d5";
+
+Example:
+
+	afe: mt2701-afe-pcm@11220000 {
+		compatible = "mediatek,mt2701-audio";
+		reg = <0 0x11220000 0 0x2000>,
+		      <0 0x112A0000 0 0x20000>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_AUDIO>,
+			 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+			 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+			 <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+			 <&topckgen CLK_TOP_AUD_MUX2_DIV>,
+			 <&topckgen CLK_TOP_AUD_48K_TIMING>,
+			 <&topckgen CLK_TOP_AUD_44K_TIMING>,
+			 <&topckgen CLK_TOP_AUDPLL_MUX_SEL>,
+			 <&topckgen CLK_TOP_APLL_SEL>,
+			 <&topckgen CLK_TOP_AUD1PLL_98M>,
+			 <&topckgen CLK_TOP_AUD2PLL_90M>,
+			 <&topckgen CLK_TOP_HADDS2PLL_98M>,
+			 <&topckgen CLK_TOP_HADDS2PLL_294M>,
+			 <&topckgen CLK_TOP_AUDPLL>,
+			 <&topckgen CLK_TOP_AUDPLL_D4>,
+			 <&topckgen CLK_TOP_AUDPLL_D8>,
+			 <&topckgen CLK_TOP_AUDPLL_D16>,
+			 <&topckgen CLK_TOP_AUDPLL_D24>,
+			 <&topckgen CLK_TOP_AUDINTBUS_SEL>,
+			 <&clk26m>,
+			 <&topckgen CLK_TOP_SYSPLL1_D4>,
+			 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+			 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+			 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+			 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+			 <&topckgen CLK_TOP_AUD_K5_SRC_SEL>,
+			 <&topckgen CLK_TOP_AUD_K6_SRC_SEL>,
+			 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+			 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+			 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+			 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+			 <&topckgen CLK_TOP_AUD_K5_SRC_DIV>,
+			 <&topckgen CLK_TOP_AUD_K6_SRC_DIV>,
+			 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+			 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+			 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+			 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+			 <&topckgen CLK_TOP_AUD_I2S5_MCLK>,
+			 <&topckgen CLK_TOP_AUD_I2S6_MCLK>,
+			 <&topckgen CLK_TOP_ASM_M_SEL>,
+			 <&topckgen CLK_TOP_ASM_H_SEL>,
+			 <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_UNIVPLL2_D2>,
+			 <&topckgen CLK_TOP_SYSPLL_D5>;
+
+		clock-names = "infra_sys_audio_clk",
+			      "top_audio_mux1_sel",
+			      "top_audio_mux2_sel",
+			      "top_audio_mux1_div",
+			      "top_audio_mux2_div",
+			      "top_audio_48k_timing",
+			      "top_audio_44k_timing",
+			      "top_audpll_mux_sel",
+			      "top_apll_sel",
+			      "top_aud1_pll_98M",
+			      "top_aud2_pll_90M",
+			      "top_hadds2_pll_98M",
+			      "top_hadds2_pll_294M",
+			      "top_audpll",
+			      "top_audpll_d4",
+			      "top_audpll_d8",
+			      "top_audpll_d16",
+			      "top_audpll_d24",
+			      "top_audintbus_sel",
+			      "clk_26m",
+			      "top_syspll1_d4",
+			      "top_aud_k1_src_sel",
+			      "top_aud_k2_src_sel",
+			      "top_aud_k3_src_sel",
+			      "top_aud_k4_src_sel",
+			      "top_aud_k5_src_sel",
+			      "top_aud_k6_src_sel",
+			      "top_aud_k1_src_div",
+			      "top_aud_k2_src_div",
+			      "top_aud_k3_src_div",
+			      "top_aud_k4_src_div",
+			      "top_aud_k5_src_div",
+			      "top_aud_k6_src_div",
+			      "top_aud_i2s1_mclk",
+			      "top_aud_i2s2_mclk",
+			      "top_aud_i2s3_mclk",
+			      "top_aud_i2s4_mclk",
+			      "top_aud_i2s5_mclk",
+			      "top_aud_i2s6_mclk",
+			      "top_asm_m_sel",
+			      "top_asm_h_sel",
+			      "top_univpll2_d4",
+			      "top_univpll2_d2",
+			      "top_syspll_d5";
+	};

Documentation/devicetree/bindings/sound/mt2701-cs42448.txt

@@ -0,0 +1,43 @@
+MT2701 with CS42448 CODEC
+
+Required properties:
+- compatible: "mediatek,mt2701-cs42448-machine"
+- mediatek,platform: the phandle of MT2701 ASoC platform
+- audio-routing: a list of the connections between audio
+- mediatek,audio-codec: the phandles of cs42448 codec
+- mediatek,audio-codec-bt-mrg the phandles of bt-sco dummy codec
+- pinctrl-names: Should contain only one value - "default"
+- pinctrl-0: Should specify pin control groups used for this controller.
+- i2s1-in-sel-gpio1, i2s1-in-sel-gpio2: Should specify two gpio pins to
+					control I2S1-in mux.
+
+Example:
+
+	sound:sound {
+		compatible = "mediatek,mt2701-cs42448-machine";
+		mediatek,platform = <&afe>;
+		/* CS42448 Machine name */
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "AMIC",
+			"AIN1R", "AMIC",
+			"AIN2L", "Tuner In",
+			"AIN2R", "Tuner In",
+			"AIN3L", "Satellite Tuner In",
+			"AIN3R", "Satellite Tuner In",
+			"AIN3L", "AUX In",
+			"AIN3R", "AUX In";
+		mediatek,audio-codec = <&cs42448>;
+		mediatek,audio-codec-bt-mrg = <&bt_sco_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&aud_pins_default>;
+		i2s1-in-sel-gpio1 = <&pio 53 0>;
+		i2s1-in-sel-gpio2 = <&pio 54 0>;
+	};

Documentation/devicetree/bindings/sound/mt8173-rt5650.txt

@@ -1,8 +1,9 @@
-MT8173 with RT5650 CODECS
+MT8173 with RT5650 CODECS and HDMI via I2S
 
 Required properties:
 - compatible : "mediatek,mt8173-rt5650"
 - mediatek,audio-codec: the phandles of rt5650 codecs
+                        and of the hdmi encoder node
 - mediatek,platform: the phandle of MT8173 ASoC platform
 
 Optional subnodes:
@@ -12,12 +13,17 @@ Required codec-capture subnode properties:
   <&rt5650 0> : Default setting. Connect rt5650 I2S1 for capture. (dai_name = rt5645-aif1)
   <&rt5650 1> : Connect rt5650 I2S2 for capture. (dai_name = rt5645-aif2)
 
+- mediatek,mclk: the MCLK source
+  0 : external oscillator, MCLK = 12.288M
+  1 : internal source from mt8173, MCLK = sampling rate*256
+
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-rt5650";
-		mediatek,audio-codec = <&rt5650>;
+		mediatek,audio-codec = <&rt5650 &hdmi0>;
 		mediatek,platform = <&afe>;
+		mediatek,mclk = <0>;
 		codec-capture {
 			sound-dai = <&rt5650 1>;
 		};

Documentation/devicetree/bindings/sound/omap-mcpdm.txt

@@ -8,6 +8,8 @@ Required properties:
 - interrupts: Interrupt number for McPDM
 - interrupt-parent: The parent interrupt controller
 - ti,hwmods: Name of the hwmod associated to the McPDM
+- clocks:  phandle for the pdmclk provider, likely <&twl6040>
+- clock-names: Must be "pdmclk"
 
 Example:
 
@@ -19,3 +21,11 @@ mcpdm: mcpdm@40132000 {
 	interrupt-parent = <&gic>;
 	ti,hwmods = "mcpdm";
 };
+
+In board DTS file the pdmclk needs to be added:
+
+&mcpdm {
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+	status = "okay";
+};

Documentation/devicetree/bindings/sound/renesas,rsnd.txt

@@ -373,6 +373,8 @@ Optional properties:
 - #clock-cells			: it must be 0 if your system has audio_clkout
 				  it must be 1 if your system has audio_clkout0/1/2/3
 - clock-frequency		: for all audio_clkout0/1/2/3
+- clkout-lr-asynchronous	: boolean property. it indicates that audio_clkoutn
+				  is asynchronizes with lr-clock.
 
 SSI subnode properties:
 - interrupts			: Should contain SSI interrupt for PIO transfer

Documentation/devicetree/bindings/sound/rockchip-i2s.txt

@@ -23,6 +23,11 @@ Required properties:
 - rockchip,playback-channels: max playback channels, if not set, 8 channels default.
 - rockchip,capture-channels: max capture channels, if not set, 2 channels default.
 
+Required properties for controller which support multi channels
+playback/capture:
+
+- rockchip,grf: the phandle of the syscon node for GRF register.
+
 Example for rk3288 I2S controller:
 
 i2s@ff890000 {

Documentation/devicetree/bindings/sound/rt5514.txt

@@ -8,6 +8,11 @@ Required properties:
 
 - reg : The I2C address of the device.
 
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
 Pins on the device (for linking into audio routes) for RT5514:
 
   * DMIC1L

Documentation/devicetree/bindings/sound/samsung,odroidx2-max98090.txt

@@ -1,35 +0,0 @@
-Samsung Exynos Odroid X2/U3 audio complex with MAX98090 codec
-
-Required properties:
- - compatible : "samsung,odroidx2-audio" - for Odroid X2 board,
-		"samsung,odroidu3-audio" - for Odroid U3 board
- - samsung,model : the user-visible name of this sound complex
- - samsung,i2s-controller : the phandle of the I2S controller
- - samsung,audio-codec : the phandle of the MAX98090 audio codec
- - samsung,audio-routing : a list of the connections between audio
-   components;  each entry is a pair of strings, the first being the
-   connection's sink, the second being the connection's source;
-   valid names for sources and sinks are the MAX98090's pins (as
-   documented in its binding), and the jacks on the board
-   For Odroid X2:
-     * Headphone Jack
-     * Mic Jack
-     * DMIC
-
-   For Odroid U3:
-     * Headphone Jack
-     * Speakers
-
-Example:
-
-sound {
-	compatible = "samsung,odroidu3-audio";
-	samsung,i2s-controller = <&i2s0>;
-	samsung,audio-codec = <&max98090>;
-	samsung,model = "Odroid-X2";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"IN1", "Mic Jack",
-		"Mic Jack", "MICBIAS";
-};

Documentation/devicetree/bindings/sound/sgtl5000.txt

@@ -7,6 +7,14 @@ Required properties:
 
 - clocks : the clock provider of SYS_MCLK
 
+- VDDA-supply : the regulator provider of VDDA
+
+- VDDIO-supply: the regulator provider of VDDIO
+
+Optional properties:
+
+- VDDD-supply : the regulator provider of VDDD
+
 - micbias-resistor-k-ohms : the bias resistor to be used in kOmhs
 	The resistor can take values of 2k, 4k or 8k.
 	If set to 0 it will be off.
@@ -15,17 +23,9 @@ Required properties:
 
 - micbias-voltage-m-volts : the bias voltage to be used in mVolts
 	The voltage can take values from 1.25V to 3V by 250mV steps
-	If this node is not mentionned or the value is unknown, then
+	If this node is not mentioned or the value is unknown, then
 	the value is set to 1.25V.
 
-- VDDA-supply : the regulator provider of VDDA
-
-- VDDIO-supply: the regulator provider of VDDIO
-
-Optional properties:
-
-- VDDD-supply : the regulator provider of VDDD
-
 Example:
 
 codec: sgtl5000@0a {

Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt

@@ -33,11 +33,11 @@ Required properties:
 	"tx" for "st,sti-uni-player" compatibility
 	"rx" for "st,sti-uni-reader" compatibility
 
-  - version: IP version integrated in SOC.
+  - st,version: IP version integrated in SOC.
 
   - dai-name: DAI name that describes the IP.
 
-  - IP mode: IP working mode depending on associated codec.
+  - st,mode: IP working mode depending on associated codec.
 	"HDMI" connected to HDMI codec and support IEC HDMI formats (player only).
 	"SPDIF" connected to SPDIF codec and support SPDIF formats (player only).
 	"PCM" PCM standard mode for I2S or TDM bus.
@@ -47,7 +47,7 @@ Required properties ("st,sti-uni-player" compatibility only):
   - clocks: CPU_DAI IP clock source, listed in the same order than the
 	    CPU_DAI properties.
 
-  - uniperiph-id: internal SOC IP instance ID.
+  - st,uniperiph-id: internal SOC IP instance ID.
 
 Optional properties:
   - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
@@ -84,9 +84,9 @@ Example:
 		dmas = <&fdma0 4 0 1>;
 		dai-name = "Uni Player #2 (DAC)";
 		dma-names = "tx";
-		uniperiph-id = <2>;
+		st,uniperiph-id = <2>;
-		version = <5>;
+		st,version = <5>;
-		mode = "PCM";
+		st,mode = "PCM";
 	};
 
 	sti_uni_player3: sti-uni-player@3 {
@@ -100,9 +100,9 @@ Example:
 		dmas = <&fdma0 7 0 1>;
 		dma-names = "tx";
 		dai-name = "Uni Player #3 (SPDIF)";
-		uniperiph-id = <3>;
+		st,uniperiph-id = <3>;
-		version = <5>;
+		st,version = <5>;
-		mode = "SPDIF";
+		st,mode = "SPDIF";
 	};
 
 	sti_uni_reader1: sti-uni-reader@1 {
@@ -115,7 +115,7 @@ Example:
 		dmas = <&fdma0 6 0 1>;
 		dma-names = "rx";
 		dai-name = "Uni Reader #1 (HDMI RX)";
-		version = <3>;
+		st,version = <3>;
 		st,mode = "PCM";
 	};
 

Documentation/devicetree/bindings/sound/sun4i-i2s.txt

@@ -0,0 +1,34 @@
+* Allwinner A10 I2S controller
+
+The I2S bus (Inter-IC sound bus) is a serial link for digital
+audio data transfer between devices in the system.
+
+Required properties:
+
+- compatible: should be one of the followings
+   - "allwinner,sun4i-a10-i2s"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: should contain the I2S interrupt.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should include "tx" and "rx".
+- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names: should contain followings:
+   - "apb" : clock for the I2S bus interface
+   - "mod" : module clock for the I2S controller
+- #sound-dai-cells : Must be equal to 0
+
+Example:
+
+i2s0: i2s@01c22400 {
+	#sound-dai-cells = <0>;
+	compatible = "allwinner,sun4i-a10-i2s";
+	reg = <0x01c22400 0x400>;
+	interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&apb0_gates 3>, <&i2s0_clk>;
+	clock-names = "apb", "mod";
+	dmas = <&dma SUN4I_DMA_NORMAL 3>,
+	       <&dma SUN4I_DMA_NORMAL 3>;
+	dma-names = "rx", "tx";
+};

Documentation/gdb-kernel-debugging.txt

@@ -139,27 +139,6 @@ Examples of using the Linux-provided gdb helpers
       start_comm = "swapper/2\000\000\000\000\000\000"
     }
 
- o Dig into a radix tree data structure, such as the IRQ descriptors:
-    (gdb) print (struct irq_desc)$lx_radix_tree_lookup(irq_desc_tree, 18)
-    $6 = {
-      irq_common_data = {
-        state_use_accessors = 67584,
-        handler_data = 0x0 <__vectors_start>,
-        msi_desc = 0x0 <__vectors_start>,
-        affinity = {{
-            bits = {65535}
-          }}
-      },
-      irq_data = {
-        mask = 0,
-        irq = 18,
-        hwirq = 27,
-        common = 0xee803d80,
-        chip = 0xc0eb0854 <gic_data>,
-        domain = 0xee808000,
-        parent_data = 0x0 <__vectors_start>,
-        chip_data = 0xc0eb0854 <gic_data>
-      } <... trimmed ...>
 
 List of commands and functions
 ------------------------------

Documentation/sound/alsa/soc/machine.txt

@@ -3,7 +3,7 @@ ASoC Machine Driver
 
 The ASoC machine (or board) driver is the code that glues together all the
 component drivers (e.g. codecs, platforms and DAIs). It also describes the
-relationships between each componnent which include audio paths, GPIOs,
+relationships between each component which include audio paths, GPIOs,
 interrupts, clocking, jacks and voltage regulators.
 
 The machine driver can contain codec and platform specific code. It registers

Documentation/x86/intel_mpx.txt

@@ -45,7 +45,7 @@ is how we expect the compiler, application and kernel to work together.
    MPX-instrumented.
 3) The kernel detects that the CPU has MPX, allows the new prctl() to
    succeed, and notes the location of the bounds directory. Userspace is
-   expected to keep the bounds directory at that locationWe note it
+   expected to keep the bounds directory at that location. We note it
    instead of reading it each time because the 'xsave' operation needed
    to access the bounds directory register is an expensive operation.
 4) If the application needs to spill bounds out of the 4 registers, it
@@ -167,7 +167,7 @@ If a #BR is generated due to a bounds violation caused by MPX.
 We need to decode MPX instructions to get violation address and
 set this address into extended struct siginfo.
 
-The _sigfault feild of struct siginfo is extended as follow:
+The _sigfault field of struct siginfo is extended as follow:
 
 87		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
 88		struct {
@@ -240,5 +240,5 @@ them at the same bounds table.
 This is allowed architecturally.  See more information "Intel(R) Architecture
 Instruction Set Extensions Programming Reference" (9.3.4).
 
-However, if users did this, the kernel might be fooled in to unmaping an
+However, if users did this, the kernel might be fooled in to unmapping an
 in-use bounds table since it does not recognize sharing.

Documentation/x86/tlb.txt

@@ -5,7 +5,7 @@ memory, it has two choices:
     from areas other than the one we are trying to flush will be
     destroyed and must be refilled later, at some cost.
  2. Use the invlpg instruction to invalidate a single page at a
-    time.  This could potentialy cost many more instructions, but
+    time.  This could potentially cost many more instructions, but
     it is a much more precise operation, causing no collateral
     damage to other TLB entries.
 
@@ -19,7 +19,7 @@ Which method to do depends on a few things:
     work.
  3. The size of the TLB.  The larger the TLB, the more collateral
     damage we do with a full flush.  So, the larger the TLB, the
-    more attrative an individual flush looks.  Data and
+    more attractive an individual flush looks.  Data and
     instructions have separate TLBs, as do different page sizes.
  4. The microarchitecture.  The TLB has become a multi-level
     cache on modern CPUs, and the global flushes have become more

Documentation/x86/x86_64/machinecheck

@@ -36,7 +36,7 @@ between all CPUs.
 
 check_interval
 	How often to poll for corrected machine check errors, in seconds
-	(Note output is hexademical). Default 5 minutes.  When the poller
+	(Note output is hexadecimal). Default 5 minutes.  When the poller
 	finds MCEs it triggers an exponential speedup (poll more often) on
 	the polling interval.  When the poller stops finding MCEs, it
 	triggers an exponential backoff (poll less often) on the polling

MAINTAINERS

@@ -595,6 +595,10 @@ S:	Odd Fixes
 L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
+ALPS PS/2 TOUCHPAD DRIVER
+R:	Pali Rohár <pali.rohar@gmail.com>
+F:	drivers/input/mouse/alps.*
+
 ALTERA MAILBOX DRIVER
 M:	Ley Foon Tan <lftan@altera.com>
 L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
@@ -1604,7 +1608,6 @@ F:	drivers/*/*/*s3c2410*
 F:	drivers/memory/samsung/*
 F:	drivers/soc/samsung/*
 F:	drivers/spi/spi-s3c*
-F:	sound/soc/samsung/*
 F:	Documentation/arm/Samsung/
 F:	Documentation/devicetree/bindings/arm/samsung/
 F:	Documentation/devicetree/bindings/sram/samsung-sram.txt
@@ -1690,8 +1693,6 @@ S:	Maintained
 F:	drivers/edac/altera_edac.
 
 ARM/STI ARCHITECTURE
-M:	Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
-M:	Maxime Coquelin <maxime.coquelin@st.com>
 M:	Patrice Chotard <patrice.chotard@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	kernel@stlinux.com
@@ -1724,6 +1725,7 @@ F:	drivers/ata/ahci_st.c
 
 ARM/STM32 ARCHITECTURE
 M:	Maxime Coquelin <mcoquelin.stm32@gmail.com>
+M:	Alexandre Torgue <alexandre.torgue@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git
@@ -4473,7 +4475,7 @@ S:	Orphan
 F:	fs/efs/
 
 EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
-M:	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
+M:	Douglas Miller <dougmill@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/ibm/ehea/
@@ -7267,6 +7269,13 @@ F:	Documentation/devicetree/bindings/i2c/max6697.txt
 F:	drivers/hwmon/max6697.c
 F:	include/linux/platform_data/max6697.h
 
+MAX9860 MONO AUDIO VOICE CODEC DRIVER
+M:	Peter Rosin <peda@axentia.se>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/sound/max9860.txt
+F:	sound/soc/codecs/max9860.*
+
 MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
 M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
 L:	linux-pm@vger.kernel.org
@@ -7420,7 +7429,7 @@ F:	drivers/scsi/megaraid.*
 F:	drivers/scsi/megaraid/
 
 MELLANOX ETHERNET DRIVER (mlx4_en)
-M: 	Eugenia Emantayev <eugenia@mellanox.com>
+M:	Tariq Toukan <tariqt@mellanox.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
@@ -7472,6 +7481,7 @@ Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
 T:	git git://git.infradead.org/linux-mtd.git
 T:	git git://git.infradead.org/l2-mtd.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/mtd/
 F:	drivers/mtd/
 F:	include/linux/mtd/
 F:	include/uapi/mtd/
@@ -8959,6 +8969,7 @@ L:	linux-gpio@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/pinctrl/
+F:	Documentation/pinctrl.txt
 F:	drivers/pinctrl/
 F:	include/linux/pinctrl/
 
@@ -9891,7 +9902,9 @@ S:	Maintained
 F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG AUDIO (ASoC) DRIVERS
+M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
 M:	Sangbeom Kim <sbkim73@samsung.com>
+M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/samsung/
@@ -10719,6 +10732,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
+F:	Documentation/devicetree/bindings/sound/
 F:	Documentation/sound/alsa/soc/
 F:	sound/soc/
 F:	include/sound/soc*

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*
@@ -363,11 +363,13 @@ CHECK		= sparse
 
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 		  -Wbitwise -Wno-return-void $(CF)
+NOSTDINC_FLAGS  =
 CFLAGS_MODULE   =
 AFLAGS_MODULE   =
 LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
+LDFLAGS_vmlinux =
 CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized
 CFLAGS_KCOV	= -fsanitize-coverage=trace-pc
 

arch/arc/Makefile

@@ -66,8 +66,6 @@ endif
 
 endif
 
-cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables
-
 # By default gcc 4.8 generates dwarf4 which kernel unwinder can't grok
 ifeq ($(atleast_gcc48),y)
 cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -gdwarf-2

arch/arc/kernel/stacktrace.c

@@ -142,7 +142,7 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 	 * prelogue is setup (callee regs saved and then fp set and not other
 	 * way around
 	 */
-	pr_warn("CONFIG_ARC_DW2_UNWIND needs to be enabled\n");
+	pr_warn_once("CONFIG_ARC_DW2_UNWIND needs to be enabled\n");
 	return 0;
 
 #endif

arch/arm/boot/dts/armada-385-linksys.dtsi

@@ -58,8 +58,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
 

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -65,8 +65,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 44>, <&dram_gates 26>;
+				 <&ahb_gates 43>, <&ahb_gates 44>,
+				 <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -74,8 +75,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&ahb_gates 43>, <&ahb_gates 44>,
+				 <&ahb_gates 46>,
 				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
@@ -84,9 +86,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 46>, <&dram_gates 25>,
+				 <&ahb_gates 44>, <&ahb_gates 46>,
-				 <&dram_gates 26>;
+				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -94,8 +96,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
-			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>,
-				 <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&ahb_gates 36>, <&ahb_gates 44>,
+				 <&ahb_gates 46>,
 				 <&dram_gates 5>, <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -65,8 +65,8 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 44>;
+				 <&ahb_gates 43>, <&ahb_gates 44>;
 			status = "disabled";
 		};
 
@@ -74,7 +74,8 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
+				 <&ahb_gates 44>;
 			status = "disabled";
 		};
 
@@ -82,8 +83,8 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-tve0";
-			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>,
-				 <&ahb_gates 44>;
+				 <&ahb_gates 36>, <&ahb_gates 44>;
 			status = "disabled";
 		};
 	};

arch/arm/boot/dts/sun5i-r8-chip.dts

@@ -52,7 +52,7 @@
 
 / {
 	model = "NextThing C.H.I.P.";
-	compatible = "nextthing,chip", "allwinner,sun5i-r8";
+	compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13";
 
 	aliases {
 		i2c0 = &i2c0;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -67,8 +67,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&ahb_gates 44>, <&dram_gates 26>;
+				 <&ahb_gates 43>, <&ahb_gates 44>,
+				 <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -76,8 +77,8 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
-				 <&dram_gates 26>;
+				 <&ahb_gates 44>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -85,7 +86,7 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-tve0";
-			clocks = <&pll5 1>,
+			clocks = <&pll3>, <&pll5 1>,
 				 <&ahb_gates 34>, <&ahb_gates 36>, <&ahb_gates 44>,
 				 <&dram_gates 5>, <&dram_gates 26>;
 			status = "disabled";
@@ -231,6 +232,7 @@
 		pll3x2: pll3x2_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
+			clocks = <&pll3>;
 			clock-div = <1>;
 			clock-mult = <2>;
 			clock-output-names = "pll3-2x";
@@ -272,6 +274,7 @@
 		pll7x2: pll7x2_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
+			clocks = <&pll7>;
 			clock-div = <1>;
 			clock-mult = <2>;
 			clock-output-names = "pll7-2x";

arch/arm/boot/dts/tegra30-beaver.dts

@@ -1843,7 +1843,7 @@
 
 				ldo5_reg: ldo5 {
 					regulator-name = "vddio_sdmmc,avdd_vdac";
-					regulator-min-microvolt = <3300000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
@@ -1914,6 +1914,7 @@
 
 	sdhci@78000000 {
 		status = "okay";
+		vqmmc-supply = <&ldo5_reg>;
 		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
 		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;

arch/arm/kvm/arm.c

@@ -263,6 +263,7 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 	kvm_timer_vcpu_terminate(vcpu);
 	kvm_vgic_vcpu_destroy(vcpu);
 	kvm_pmu_vcpu_destroy(vcpu);
+	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, vcpu);
 }
 

arch/arm/mach-mvebu/Makefile

@@ -7,9 +7,15 @@ CFLAGS_pmsu.o			:= -march=armv7-a
 obj-$(CONFIG_MACH_MVEBU_ANY)	 += system-controller.o mvebu-soc-id.o
 
 ifeq ($(CONFIG_MACH_MVEBU_V7),y)
-obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o pm.o pm-board.o
+obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
+
+obj-$(CONFIG_PM)		 += pm.o pm-board.o
 obj-$(CONFIG_SMP)		 += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
 endif
 
 obj-$(CONFIG_MACH_DOVE)		 += dove.o
-obj-$(CONFIG_MACH_KIRKWOOD)	 += kirkwood.o kirkwood-pm.o
+
+ifeq ($(CONFIG_MACH_KIRKWOOD),y)
+obj-y				 += kirkwood.o
+obj-$(CONFIG_PM)		 += kirkwood-pm.o
+endif

arch/arm/mach-mvebu/coherency.c

@@ -162,22 +162,16 @@ exit:
 }
 
 /*
- * This ioremap hook is used on Armada 375/38x to ensure that PCIe
+ * This ioremap hook is used on Armada 375/38x to ensure that all MMIO
- * memory areas are mapped as MT_UNCACHED instead of MT_DEVICE. This
+ * areas are mapped as MT_UNCACHED instead of MT_DEVICE. This is
- * is needed as a workaround for a deadlock issue between the PCIe
+ * needed for the HW I/O coherency mechanism to work properly without
- * interface and the cache controller.
+ * deadlock.
  */
 static void __iomem *
-armada_pcie_wa_ioremap_caller(phys_addr_t phys_addr, size_t size,
+armada_wa_ioremap_caller(phys_addr_t phys_addr, size_t size,
 			 unsigned int mtype, void *caller)
 {
-	struct resource pcie_mem;
-
-	mvebu_mbus_get_pcie_mem_aperture(&pcie_mem);
-
-	if (pcie_mem.start <= phys_addr && (phys_addr + size) <= pcie_mem.end)
 	mtype = MT_UNCACHED;
-
 	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
 }
 
@@ -186,7 +180,8 @@ static void __init armada_375_380_coherency_init(struct device_node *np)
 	struct device_node *cache_dn;
 
 	coherency_cpu_base = of_iomap(np, 0);
-	arch_ioremap_caller = armada_pcie_wa_ioremap_caller;
+	arch_ioremap_caller = armada_wa_ioremap_caller;
+	pci_ioremap_set_mem_type(MT_UNCACHED);
 
 	/*
 	 * We should switch the PL310 to I/O coherency mode only if

arch/arm64/include/asm/cputype.h

@@ -80,12 +80,14 @@
 #define APM_CPU_PART_POTENZA		0x000
 
 #define CAVIUM_CPU_PART_THUNDERX	0x0A1
+#define CAVIUM_CPU_PART_THUNDERX_81XX	0x0A2
 
 #define BRCM_CPU_PART_VULCAN		0x516
 
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
+#define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 
 #ifndef __ASSEMBLY__
 

arch/arm64/include/asm/ptrace.h

@@ -117,6 +117,8 @@ struct pt_regs {
 	};
 	u64 orig_x0;
 	u64 syscallno;
+	u64 orig_addr_limit;
+	u64 unused;	// maintain 16 byte alignment
 };
 
 #define arch_has_single_step()	(1)

arch/arm64/kernel/asm-offsets.c

@@ -60,6 +60,7 @@ int main(void)
   DEFINE(S_PC,			offsetof(struct pt_regs, pc));
   DEFINE(S_ORIG_X0,		offsetof(struct pt_regs, orig_x0));
   DEFINE(S_SYSCALLNO,		offsetof(struct pt_regs, syscallno));
+  DEFINE(S_ORIG_ADDR_LIMIT,	offsetof(struct pt_regs, orig_addr_limit));
   DEFINE(S_FRAME_SIZE,		sizeof(struct pt_regs));
   BLANK();
   DEFINE(MM_CONTEXT_ID,		offsetof(struct mm_struct, context.id.counter));

arch/arm64/kernel/cpu_errata.c

@@ -98,6 +98,12 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		MIDR_RANGE(MIDR_THUNDERX, 0x00,
 			   (1 << MIDR_VARIANT_SHIFT) | 1),
 	},
+	{
+	/* Cavium ThunderX, T81 pass 1.0 */
+		.desc = "Cavium erratum 27456",
+		.capability = ARM64_WORKAROUND_CAVIUM_27456,
+		MIDR_RANGE(MIDR_THUNDERX_81XX, 0x00, 0x00),
+	},
 #endif
 	{
 	}

arch/arm64/kernel/entry.S

@@ -28,6 +28,7 @@
 #include <asm/errno.h>
 #include <asm/esr.h>
 #include <asm/irq.h>
+#include <asm/memory.h>
 #include <asm/thread_info.h>
 #include <asm/unistd.h>
 
@@ -97,7 +98,14 @@
 	mov	x29, xzr			// fp pointed to user-space
 	.else
 	add	x21, sp, #S_FRAME_SIZE
-	.endif
+	get_thread_info tsk
+	/* Save the task's original addr_limit and set USER_DS (TASK_SIZE_64) */
+	ldr	x20, [tsk, #TI_ADDR_LIMIT]
+	str	x20, [sp, #S_ORIG_ADDR_LIMIT]
+	mov	x20, #TASK_SIZE_64
+	str	x20, [tsk, #TI_ADDR_LIMIT]
+	ALTERNATIVE(nop, SET_PSTATE_UAO(0), ARM64_HAS_UAO, CONFIG_ARM64_UAO)
+	.endif /* \el == 0 */
 	mrs	x22, elr_el1
 	mrs	x23, spsr_el1
 	stp	lr, x21, [sp, #S_LR]
@@ -128,6 +136,14 @@
 	.endm
 
 	.macro	kernel_exit, el
+	.if	\el != 0
+	/* Restore the task's original addr_limit. */
+	ldr	x20, [sp, #S_ORIG_ADDR_LIMIT]
+	str	x20, [tsk, #TI_ADDR_LIMIT]
+
+	/* No need to restore UAO, it will be restored from SPSR_EL1 */
+	.endif
+
 	ldp	x21, x22, [sp, #S_PC]		// load ELR, SPSR
 	.if	\el == 0
 	ct_user_enter
@@ -406,7 +422,6 @@ el1_irq:
 	bl	trace_hardirqs_off
 #endif
 
-	get_thread_info tsk
 	irq_handler
 
 #ifdef CONFIG_PREEMPT

arch/arm64/mm/fault.c

@@ -280,7 +280,8 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 	}
 
 	if (permission_fault(esr) && (addr < USER_DS)) {
-		if (get_fs() == KERNEL_DS)
+		/* regs->orig_addr_limit may be 0 if we entered from EL0 */
+		if (regs->orig_addr_limit == KERNEL_DS)
 			die("Accessing user space memory with fs=KERNEL_DS", regs, esr);
 
 		if (!search_exception_tables(regs->pc))

arch/m32r/boot/compressed/m32r_sio.c

@@ -8,12 +8,13 @@
 
 #include <asm/processor.h>
 
-static void putc(char c);
+static void m32r_putc(char c);
 
 static int puts(const char *s)
 {
 	char c;
-	while ((c = *s++)) putc(c);
+	while ((c = *s++))
+		m32r_putc(c);
 	return 0;
 }
 
@@ -41,7 +42,7 @@ static int puts(const char *s)
 #define BOOT_SIO0TXB	PLD_ESIO0TXB
 #endif
 
-static void putc(char c)
+static void m32r_putc(char c)
 {
 	while ((*BOOT_SIO0STS & 0x3) != 0x3)
 		cpu_relax();
@@ -61,7 +62,7 @@ static void putc(char c)
 #define SIO0TXB	(volatile unsigned short *)(0x00efd000 + 30)
 #endif
 
-static void putc(char c)
+static void m32r_putc(char c)
 {
 	while ((*SIO0STS & 0x1) == 0)
 		cpu_relax();

arch/m68k/coldfire/head.S

@@ -288,7 +288,7 @@ _clear_bss:
 #endif
 
 	/*
-	 *	Assember start up done, start code proper.
+	 *	Assembler start up done, start code proper.
 	 */
 	jsr	start_kernel			/* start Linux kernel */
 

arch/m68k/coldfire/m5272.c

@@ -111,7 +111,7 @@ void __init config_BSP(char *commandp, int size)
 /***************************************************************************/
 
 /*
- * Some 5272 based boards have the FEC ethernet diectly connected to
+ * Some 5272 based boards have the FEC ethernet directly connected to
  * an ethernet switch. In this case we need to use the fixed phy type,
  * and we need to declare it early in boot.
  */

arch/m68k/coldfire/pci.c

@@ -42,7 +42,7 @@ static unsigned long iospace;
 
 /*
  * We need to be carefull probing on bus 0 (directly connected to host
- * bridge). We should only acccess the well defined possible devices in
+ * bridge). We should only access the well defined possible devices in
  * use, ignore aliases and the like.
  */
 static unsigned char mcf_host_slot2sid[32] = {

arch/m68k/configs/amiga_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -359,6 +360,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -553,7 +555,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/apollo_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -341,6 +342,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -512,7 +514,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/atari_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -350,6 +351,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -533,7 +535,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/bvme6000_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -340,6 +341,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -504,7 +506,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/hp300_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -341,6 +342,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -514,7 +516,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/mac_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -357,6 +358,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -536,7 +538,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/multi_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -390,6 +391,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -616,7 +618,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/mvme147_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -339,6 +340,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -504,7 +506,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/mvme16x_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -340,6 +341,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -504,7 +506,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/q40_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -346,6 +347,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -527,7 +529,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/sun3_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -337,6 +338,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -506,7 +508,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/configs/sun3x_defconfig

@@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -337,6 +338,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_GTP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
@@ -506,7 +508,9 @@ CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
 CONFIG_TEST_PRINTF=m
 CONFIG_TEST_BITMAP=m
+CONFIG_TEST_UUID=m
 CONFIG_TEST_RHASHTABLE=m
+CONFIG_TEST_HASH=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m

arch/m68k/ifpsp060/src/fpsp.S

@@ -10191,7 +10191,7 @@ xdnrm_con:
 xdnrm_sd:
 	mov.l		%a1,-(%sp)
 	tst.b		LOCAL_EX(%a0)		# is denorm pos or neg?
-	smi.b		%d1			# set d0 accodingly
+	smi.b		%d1			# set d0 accordingly
 	bsr.l		unf_sub
 	mov.l		(%sp)+,%a1
 xdnrm_exit:
@@ -10990,7 +10990,7 @@ src_qnan_m:
 # routines where an instruction is selected by an index into
 # a large jump table corresponding to a given instruction which
 # has been decoded. Flow continues here where we now decode
-# further accoding to the source operand type.
+# further according to the source operand type.
 #
 
 	global		fsinh
@@ -23196,14 +23196,14 @@ m_sign:
 #
 #  1. Branch on the sign of the adjusted exponent.
 #  2p.(positive exp)
-#   2. Check M16 and the digits in lwords 2 and 3 in decending order.
+#   2. Check M16 and the digits in lwords 2 and 3 in descending order.
 #   3. Add one for each zero encountered until a non-zero digit.
 #   4. Subtract the count from the exp.
 #   5. Check if the exp has crossed zero in #3 above; make the exp abs
 #	   and set SE.
 #	6. Multiply the mantissa by 10**count.
 #  2n.(negative exp)
-#   2. Check the digits in lwords 3 and 2 in decending order.
+#   2. Check the digits in lwords 3 and 2 in descending order.
 #   3. Add one for each zero encountered until a non-zero digit.
 #   4. Add the count to the exp.
 #   5. Check if the exp has crossed zero in #3 above; clear SE.

arch/m68k/ifpsp060/src/pfpsp.S

@@ -13156,14 +13156,14 @@ m_sign:
 #
 #  1. Branch on the sign of the adjusted exponent.
 #  2p.(positive exp)
-#   2. Check M16 and the digits in lwords 2 and 3 in decending order.
+#   2. Check M16 and the digits in lwords 2 and 3 in descending order.
 #   3. Add one for each zero encountered until a non-zero digit.
 #   4. Subtract the count from the exp.
 #   5. Check if the exp has crossed zero in #3 above; make the exp abs
 #	   and set SE.
 #	6. Multiply the mantissa by 10**count.
 #  2n.(negative exp)
-#   2. Check the digits in lwords 3 and 2 in decending order.
+#   2. Check the digits in lwords 3 and 2 in descending order.
 #   3. Add one for each zero encountered until a non-zero digit.
 #   4. Add the count to the exp.
 #   5. Check if the exp has crossed zero in #3 above; clear SE.

arch/m68k/include/asm/dma.h

@@ -18,7 +18,7 @@
  * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
  *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
  *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ * AUG/25/2000 : added support for 8, 16 and 32-bit Single-Address-Mode (K)2000
  *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
  *
  * APR/18/2002 : added proper support for MCF5272 DMA controller.

arch/m68k/include/asm/m525xsim.h

@@ -123,10 +123,10 @@
 /*
  *	I2C module.
  */
-#define MCFI2C_BASE0		(MCF_MBAR + 0x280)	/* Base addreess I2C0 */
+#define MCFI2C_BASE0		(MCF_MBAR + 0x280)	/* Base address I2C0 */
 #define MCFI2C_SIZE0		0x20			/* Register set size */
 
-#define MCFI2C_BASE1		(MCF_MBAR2 + 0x440)	/* Base addreess I2C1 */
+#define MCFI2C_BASE1		(MCF_MBAR2 + 0x440)	/* Base address I2C1 */
 #define MCFI2C_SIZE1		0x20			/* Register set size */
 
 /*

arch/m68k/include/asm/mcfmmu.h

@@ -38,7 +38,7 @@
 /*
  *	MMU Operation register.
  */
-#define	MMUOR_UAA	0x00000001		/* Update allocatiom address */
+#define	MMUOR_UAA	0x00000001		/* Update allocation address */
 #define	MMUOR_ACC	0x00000002		/* TLB access */
 #define	MMUOR_RD	0x00000004		/* TLB access read */
 #define	MMUOR_WR	0x00000000		/* TLB access write */

arch/m68k/include/asm/q40_master.h

@@ -1,6 +1,6 @@
 /*
  * Q40 master Chip Control
- * RTC stuff merged for compactnes..
+ * RTC stuff merged for compactness.
 */
 
 #ifndef _Q40_MASTER_H

arch/m68k/mac/iop.c

@@ -60,7 +60,7 @@
  *
  * The host talks to the IOPs using a rather simple message-passing scheme via
  * a shared memory area in the IOP RAM. Each IOP has seven "channels"; each
- * channel is conneced to a specific software driver on the IOP. For example
+ * channel is connected to a specific software driver on the IOP. For example
  * on the SCC IOP there is one channel for each serial port. Each channel has
  * an incoming and and outgoing message queue with a depth of one.
  *

arch/m68k/math-emu/fp_decode.h

@@ -130,7 +130,7 @@ do_fscc=0
 	bfextu	%d2{#13,#3},%d0
 .endm
 
-| decode the 8bit diplacement from the brief extension word
+| decode the 8bit displacement from the brief extension word
 .macro	fp_decode_disp8
 	move.b	%d2,%d0
 	ext.w	%d0

arch/mips/include/asm/pgtable.h

@@ -24,7 +24,7 @@ struct mm_struct;
 struct vm_area_struct;
 
 #define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_NO_READ | \
-				 _CACHE_CACHABLE_NONCOHERENT)
+				 _page_cachable_default)
 #define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_WRITE | \
 				 _page_cachable_default)
 #define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_NO_EXEC | \
@@ -476,7 +476,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 	pte.pte_low  &= (_PAGE_MODIFIED | _PAGE_ACCESSED | _PFNX_MASK);
 	pte.pte_high &= (_PFN_MASK | _CACHE_MASK);
 	pte.pte_low  |= pgprot_val(newprot) & ~_PFNX_MASK;
-	pte.pte_high |= pgprot_val(newprot) & ~_PFN_MASK;
+	pte.pte_high |= pgprot_val(newprot) & ~(_PFN_MASK | _CACHE_MASK);
 	return pte;
 }
 #elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
@@ -491,7 +491,8 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 #else
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
-	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) |
+		     (pgprot_val(newprot) & ~_PAGE_CHG_MASK));
 }
 #endif
 
@@ -632,7 +633,8 @@ static inline struct page *pmd_page(pmd_t pmd)
 
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
-	pmd_val(pmd) = (pmd_val(pmd) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	pmd_val(pmd) = (pmd_val(pmd) & (_PAGE_CHG_MASK | _PAGE_HUGE)) |
+		       (pgprot_val(newprot) & ~_PAGE_CHG_MASK);
 	return pmd;
 }
 

arch/powerpc/include/asm/book3s/64/pgtable.h

@@ -230,6 +230,7 @@ extern unsigned long __kernel_virt_size;
 #define KERN_VIRT_SIZE  __kernel_virt_size
 extern struct page *vmemmap;
 extern unsigned long ioremap_bot;
+extern unsigned long pci_io_base;
 #endif /* __ASSEMBLY__ */
 
 #include <asm/book3s/64/hash.h>

arch/powerpc/kernel/eeh_driver.c

@@ -647,7 +647,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus,
 			pci_unlock_rescan_remove();
 		}
 	} else if (frozen_bus) {
-		eeh_pe_dev_traverse(pe, eeh_rmv_device, &rmv_data);
+		eeh_pe_dev_traverse(pe, eeh_rmv_device, rmv_data);
 	}
 
 	/*

arch/powerpc/kernel/pci_64.c

@@ -47,7 +47,6 @@ static int __init pcibios_init(void)
 
 	printk(KERN_INFO "PCI: Probing PCI hardware\n");
 
-	pci_io_base = ISA_IO_BASE;
 	/* For now, override phys_mem_access_prot. If we need it,g
 	 * later, we may move that initialization to each ppc_md
 	 */

arch/powerpc/kernel/process.c

@@ -1505,6 +1505,16 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 		current->thread.regs = regs - 1;
 	}
 
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	/*
+	 * Clear any transactional state, we're exec()ing. The cause is
+	 * not important as there will never be a recheckpoint so it's not
+	 * user visible.
+	 */
+	if (MSR_TM_SUSPENDED(mfmsr()))
+		tm_reclaim_current(0);
+#endif
+
 	memset(regs->gpr, 0, sizeof(regs->gpr));
 	regs->ctr = 0;
 	regs->link = 0;

arch/powerpc/kernel/tm.S

@@ -110,17 +110,11 @@ _GLOBAL(tm_reclaim)
 	std	r3, STK_PARAM(R3)(r1)
 	SAVE_NVGPRS(r1)
 
-	/* We need to setup MSR for VSX register save instructions.  Here we
+	/* We need to setup MSR for VSX register save instructions. */
-	 * also clear the MSR RI since when we do the treclaim, we won't have a
-	 * valid kernel pointer for a while.  We clear RI here as it avoids
-	 * adding another mtmsr closer to the treclaim.  This makes the region
-	 * maked as non-recoverable wider than it needs to be but it saves on
-	 * inserting another mtmsrd later.
-	 */
 	mfmsr	r14
 	mr	r15, r14
 	ori	r15, r15, MSR_FP
-	li	r16, MSR_RI
+	li	r16, 0
 	ori	r16, r16, MSR_EE /* IRQs hard off */
 	andc	r15, r15, r16
 	oris	r15, r15, MSR_VEC@h
@@ -176,7 +170,17 @@ dont_backup_fp:
 1:	tdeqi   r6, 0
 	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
 
-	/* The moment we treclaim, ALL of our GPRs will switch
+	/* Clear MSR RI since we are about to change r1, EE is already off. */
+	li	r4, 0
+	mtmsrd	r4, 1
+
+	/*
+	 * BE CAREFUL HERE:
+	 * At this point we can't take an SLB miss since we have MSR_RI
+	 * off. Load only to/from the stack/paca which are in SLB bolted regions
+	 * until we turn MSR RI back on.
+	 *
+	 * The moment we treclaim, ALL of our GPRs will switch
 	 * to user register state.  (FPRs, CCR etc. also!)
 	 * Use an sprg and a tm_scratch in the PACA to shuffle.
 	 */
@@ -197,6 +201,11 @@ dont_backup_fp:
 
 	/* Store the PPR in r11 and reset to decent value */
 	std	r11, GPR11(r1)			/* Temporary stash */
+
+	/* Reset MSR RI so we can take SLB faults again */
+	li	r11, MSR_RI
+	mtmsrd	r11, 1
+
 	mfspr	r11, SPRN_PPR
 	HMT_MEDIUM
 
@@ -397,11 +406,6 @@ restore_gprs:
 	ld	r5, THREAD_TM_DSCR(r3)
 	ld	r6, THREAD_TM_PPR(r3)
 
-	/* Clear the MSR RI since we are about to change R1.  EE is already off
-	 */
-	li	r4, 0
-	mtmsrd	r4, 1
-
 	REST_GPR(0, r7)				/* GPR0 */
 	REST_2GPRS(2, r7)			/* GPR2-3 */
 	REST_GPR(4, r7)				/* GPR4 */
@@ -439,10 +443,33 @@ restore_gprs:
 	ld	r6, _CCR(r7)
 	mtcr    r6
 
-	REST_GPR(1, r7)				/* GPR1 */
-	REST_GPR(5, r7)				/* GPR5-7 */
 	REST_GPR(6, r7)
-	ld	r7, GPR7(r7)
+
+	/*
+	 * Store r1 and r5 on the stack so that we can access them
+	 * after we clear MSR RI.
+	 */
+
+	REST_GPR(5, r7)
+	std	r5, -8(r1)
+	ld	r5, GPR1(r7)
+	std	r5, -16(r1)
+
+	REST_GPR(7, r7)
+
+	/* Clear MSR RI since we are about to change r1. EE is already off */
+	li	r5, 0
+	mtmsrd	r5, 1
+
+	/*
+	 * BE CAREFUL HERE:
+	 * At this point we can't take an SLB miss since we have MSR_RI
+	 * off. Load only to/from the stack/paca which are in SLB bolted regions
+	 * until we turn MSR RI back on.
+	 */
+
+	ld	r5, -8(r1)
+	ld	r1, -16(r1)
 
 	/* Commit register state as checkpointed state: */
 	TRECHKPT

arch/powerpc/mm/hash_utils_64.c

@@ -922,6 +922,10 @@ void __init hash__early_init_mmu(void)
 	vmemmap = (struct page *)H_VMEMMAP_BASE;
 	ioremap_bot = IOREMAP_BASE;
 
+#ifdef CONFIG_PCI
+	pci_io_base = ISA_IO_BASE;
+#endif
+
 	/* Initialize the MMU Hash table and create the linear mapping
 	 * of memory. Has to be done before SLB initialization as this is
 	 * currently where the page size encoding is obtained.

arch/powerpc/mm/pgtable-radix.c

@@ -328,6 +328,11 @@ void __init radix__early_init_mmu(void)
 	__vmalloc_end = RADIX_VMALLOC_END;
 	vmemmap = (struct page *)RADIX_VMEMMAP_BASE;
 	ioremap_bot = IOREMAP_BASE;
+
+#ifdef CONFIG_PCI
+	pci_io_base = ISA_IO_BASE;
+#endif
+
 	/*
 	 * For now radix also use the same frag size
 	 */

arch/s390/include/asm/fpu/api.h

@@ -22,7 +22,7 @@ static inline int test_fp_ctl(u32 fpc)
 		"	la	%0,0\n"
 		"1:\n"
 		EX_TABLE(0b,1b)
-		: "=d" (rc), "=d" (orig_fpc)
+		: "=d" (rc), "=&d" (orig_fpc)
 		: "d" (fpc), "0" (-EINVAL));
 	return rc;
 }

arch/s390/kernel/ipl.c

@@ -2064,12 +2064,5 @@ void s390_reset_system(void)
 	S390_lowcore.program_new_psw.addr =
 		(unsigned long) s390_base_pgm_handler;
 
-	/*
-	 * Clear subchannel ID and number to signal new kernel that no CCW or
-	 * SCSI IPL has been done (for kexec and kdump)
-	 */
-	S390_lowcore.subchannel_id = 0;
-	S390_lowcore.subchannel_nr = 0;
-
 	do_reset_calls();
 }

arch/x86/events/core.c

@@ -263,7 +263,7 @@ static bool check_hw_exists(void)
 
 msr_fail:
 	pr_cont("Broken PMU hardware detected, using software events only.\n");
-	pr_info("%sFailed to access perfctr msr (MSR %x is %Lx)\n",
+	printk("%sFailed to access perfctr msr (MSR %x is %Lx)\n",
 		boot_cpu_has(X86_FEATURE_HYPERVISOR) ? KERN_INFO : KERN_ERR,
 		reg, val_new);
 
@@ -2319,7 +2319,7 @@ void
 perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
 	struct stack_frame frame;
-	const void __user *fp;
+	const unsigned long __user *fp;
 
 	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
 		/* TODO: We don't support guest os callchain now */
@@ -2332,7 +2332,7 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs
 	if (regs->flags & (X86_VM_MASK | PERF_EFLAGS_VM))
 		return;
 
-	fp = (void __user *)regs->bp;
+	fp = (unsigned long __user *)regs->bp;
 
 	perf_callchain_store(entry, regs->ip);
 
@@ -2345,16 +2345,17 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs
 	pagefault_disable();
 	while (entry->nr < entry->max_stack) {
 		unsigned long bytes;
+
 		frame.next_frame	     = NULL;
 		frame.return_address = 0;
 
-		if (!access_ok(VERIFY_READ, fp, 16))
+		if (!access_ok(VERIFY_READ, fp, sizeof(*fp) * 2))
 			break;
 
-		bytes = __copy_from_user_nmi(&frame.next_frame, fp, 8);
+		bytes = __copy_from_user_nmi(&frame.next_frame, fp, sizeof(*fp));
 		if (bytes != 0)
 			break;
-		bytes = __copy_from_user_nmi(&frame.return_address, fp+8, 8);
+		bytes = __copy_from_user_nmi(&frame.return_address, fp + 1, sizeof(*fp));
 		if (bytes != 0)
 			break;
 

arch/x86/events/intel/Makefile

@@ -1,8 +1,8 @@
 obj-$(CONFIG_CPU_SUP_INTEL)		+= core.o bts.o cqm.o
 obj-$(CONFIG_CPU_SUP_INTEL)		+= ds.o knc.o
 obj-$(CONFIG_CPU_SUP_INTEL)		+= lbr.o p4.o p6.o pt.o
-obj-$(CONFIG_PERF_EVENTS_INTEL_RAPL)	+= intel-rapl.o
+obj-$(CONFIG_PERF_EVENTS_INTEL_RAPL)	+= intel-rapl-perf.o
-intel-rapl-objs				:= rapl.o
+intel-rapl-perf-objs			:= rapl.o
 obj-$(CONFIG_PERF_EVENTS_INTEL_UNCORE)	+= intel-uncore.o
 intel-uncore-objs			:= uncore.o uncore_nhmex.o uncore_snb.o uncore_snbep.o
 obj-$(CONFIG_PERF_EVENTS_INTEL_CSTATE)	+= intel-cstate.o

arch/x86/events/intel/core.c

@@ -115,6 +115,10 @@ static struct event_constraint intel_snb_event_constraints[] __read_mostly =
 	INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf), /* CYCLE_ACTIVITY.CYCLES_NO_DISPATCH */
 	INTEL_UEVENT_CONSTRAINT(0x02a3, 0x4), /* CYCLE_ACTIVITY.CYCLES_L1D_PENDING */
 
+	/*
+	 * When HT is off these events can only run on the bottom 4 counters
+	 * When HT is on, they are impacted by the HT bug and require EXCL access
+	 */
 	INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf), /* MEM_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -139,6 +143,10 @@ static struct event_constraint intel_ivb_event_constraints[] __read_mostly =
 	INTEL_UEVENT_CONSTRAINT(0x0ca3, 0x4), /* CYCLE_ACTIVITY.STALLS_L1D_PENDING */
 	INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */
 
+	/*
+	 * When HT is off these events can only run on the bottom 4 counters
+	 * When HT is on, they are impacted by the HT bug and require EXCL access
+	 */
 	INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf), /* MEM_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -182,6 +190,16 @@ struct event_constraint intel_skl_event_constraints[] = {
 	FIXED_EVENT_CONSTRAINT(0x003c, 1),	/* CPU_CLK_UNHALTED.CORE */
 	FIXED_EVENT_CONSTRAINT(0x0300, 2),	/* CPU_CLK_UNHALTED.REF */
 	INTEL_UEVENT_CONSTRAINT(0x1c0, 0x2),	/* INST_RETIRED.PREC_DIST */
+
+	/*
+	 * when HT is off, these can only run on the bottom 4 counters
+	 */
+	INTEL_EVENT_CONSTRAINT(0xd0, 0xf),	/* MEM_INST_RETIRED.* */
+	INTEL_EVENT_CONSTRAINT(0xd1, 0xf),	/* MEM_LOAD_RETIRED.* */
+	INTEL_EVENT_CONSTRAINT(0xd2, 0xf),	/* MEM_LOAD_L3_HIT_RETIRED.* */
+	INTEL_EVENT_CONSTRAINT(0xcd, 0xf),	/* MEM_TRANS_RETIRED.* */
+	INTEL_EVENT_CONSTRAINT(0xc6, 0xf),	/* FRONTEND_RETIRED.* */
+
 	EVENT_CONSTRAINT_END
 };
 
@@ -250,6 +268,10 @@ static struct event_constraint intel_hsw_event_constraints[] = {
 	/* CYCLE_ACTIVITY.CYCLES_NO_EXECUTE */
 	INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf),
 
+	/*
+	 * When HT is off these events can only run on the bottom 4 counters
+	 * When HT is on, they are impacted by the HT bug and require EXCL access
+	 */
 	INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf), /* MEM_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -264,6 +286,13 @@ struct event_constraint intel_bdw_event_constraints[] = {
 	FIXED_EVENT_CONSTRAINT(0x0300, 2),	/* CPU_CLK_UNHALTED.REF */
 	INTEL_UEVENT_CONSTRAINT(0x148, 0x4),	/* L1D_PEND_MISS.PENDING */
 	INTEL_UBIT_EVENT_CONSTRAINT(0x8a3, 0x4),	/* CYCLE_ACTIVITY.CYCLES_L1D_MISS */
+	/*
+	 * when HT is off, these can only run on the bottom 4 counters
+	 */
+	INTEL_EVENT_CONSTRAINT(0xd0, 0xf),	/* MEM_INST_RETIRED.* */
+	INTEL_EVENT_CONSTRAINT(0xd1, 0xf),	/* MEM_LOAD_RETIRED.* */
+	INTEL_EVENT_CONSTRAINT(0xd2, 0xf),	/* MEM_LOAD_L3_HIT_RETIRED.* */
+	INTEL_EVENT_CONSTRAINT(0xcd, 0xf),	/* MEM_TRANS_RETIRED.* */
 	EVENT_CONSTRAINT_END
 };
 

arch/x86/include/asm/cpufeatures.h

@@ -301,10 +301,6 @@
 #define X86_BUG_FXSAVE_LEAK	X86_BUG(6) /* FXSAVE leaks FOP/FIP/FOP */
 #define X86_BUG_CLFLUSH_MONITOR	X86_BUG(7) /* AAI65, CLFLUSH required before MONITOR */
 #define X86_BUG_SYSRET_SS_ATTRS	X86_BUG(8) /* SYSRET doesn't fix up SS attrs */
-#define X86_BUG_NULL_SEG	X86_BUG(9) /* Nulling a selector preserves the base */
-#define X86_BUG_SWAPGS_FENCE	X86_BUG(10) /* SWAPGS without input dep on GS */
-
-
 #ifdef CONFIG_X86_32
 /*
  * 64-bit kernels don't use X86_BUG_ESPFIX.  Make the define conditional
@@ -312,5 +308,7 @@
  */
 #define X86_BUG_ESPFIX		X86_BUG(9) /* "" IRET to 16-bit SS corrupts ESP/RSP high bits */
 #endif
+#define X86_BUG_NULL_SEG	X86_BUG(10) /* Nulling a selector preserves the base */
+#define X86_BUG_SWAPGS_FENCE	X86_BUG(11) /* SWAPGS without input dep on GS */
 
 #endif /* _ASM_X86_CPUFEATURES_H */

arch/x86/include/asm/pvclock.h

@@ -68,30 +68,23 @@ static inline u64 pvclock_scale_delta(u64 delta, u32 mul_frac, int shift)
 	return product;
 }
 
-static __always_inline
-u64 pvclock_get_nsec_offset(const struct pvclock_vcpu_time_info *src)
-{
-	u64 delta = rdtsc_ordered() - src->tsc_timestamp;
-	return pvclock_scale_delta(delta, src->tsc_to_system_mul,
-				   src->tsc_shift);
-}
-
 static __always_inline
 unsigned __pvclock_read_cycles(const struct pvclock_vcpu_time_info *src,
 			       cycle_t *cycles, u8 *flags)
 {
 	unsigned version;
-	cycle_t ret, offset;
+	cycle_t offset;
-	u8 ret_flags;
+	u64 delta;
 
 	version = src->version;
+	/* Make the latest version visible */
+	smp_rmb();
 
-	offset = pvclock_get_nsec_offset(src);
+	delta = rdtsc_ordered() - src->tsc_timestamp;
-	ret = src->system_time + offset;
+	offset = pvclock_scale_delta(delta, src->tsc_to_system_mul,
-	ret_flags = src->flags;
+				   src->tsc_shift);
-
+	*cycles = src->system_time + offset;
-	*cycles = ret;
+	*flags = src->flags;
-	*flags = ret_flags;
 	return version;
 }
 

arch/x86/kernel/amd_nb.c

@@ -71,8 +71,8 @@ int amd_cache_northbridges(void)
 	while ((misc = next_northbridge(misc, amd_nb_misc_ids)) != NULL)
 		i++;
 
-	if (i == 0)
+	if (!i)
-		return 0;
+		return -ENODEV;
 
 	nb = kzalloc(i * sizeof(struct amd_northbridge), GFP_KERNEL);
 	if (!nb)

arch/x86/kernel/early-quirks.c

@@ -11,7 +11,11 @@
 
 #include <linux/pci.h>
 #include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/pci_ids.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
 #include <drm/i915_drm.h>
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
@@ -21,6 +25,9 @@
 #include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/irq_remapping.h>
+#include <asm/early_ioremap.h>
+
+#define dev_err(msg)  pr_err("pci 0000:%02x:%02x.%d: %s", bus, slot, func, msg)
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
@@ -75,6 +82,13 @@ static void __init nvidia_bugs(int num, int slot, int func)
 {
 #ifdef CONFIG_ACPI
 #ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Only applies to Nvidia root ports (bus 0) and not to
+	 * Nvidia graphics cards with PCI ports on secondary buses.
+	 */
+	if (num)
+		return;
+
 	/*
 	 * All timer overrides on Nvidia are
 	 * wrong unless HPET is enabled.
@@ -590,6 +604,61 @@ static void __init force_disable_hpet(int num, int slot, int func)
 #endif
 }
 
+#define BCM4331_MMIO_SIZE	16384
+#define BCM4331_PM_CAP		0x40
+#define bcma_aread32(reg)	ioread32(mmio + 1 * BCMA_CORE_SIZE + reg)
+#define bcma_awrite32(reg, val)	iowrite32(val, mmio + 1 * BCMA_CORE_SIZE + reg)
+
+static void __init apple_airport_reset(int bus, int slot, int func)
+{
+	void __iomem *mmio;
+	u16 pmcsr;
+	u64 addr;
+	int i;
+
+	if (!dmi_match(DMI_SYS_VENDOR, "Apple Inc."))
+		return;
+
+	/* Card may have been put into PCI_D3hot by grub quirk */
+	pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
+
+	if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
+		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+		write_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL, pmcsr);
+		mdelay(10);
+
+		pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
+		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
+			dev_err("Cannot power up Apple AirPort card\n");
+			return;
+		}
+	}
+
+	addr  =      read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+	addr |= (u64)read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_1) << 32;
+	addr &= PCI_BASE_ADDRESS_MEM_MASK;
+
+	mmio = early_ioremap(addr, BCM4331_MMIO_SIZE);
+	if (!mmio) {
+		dev_err("Cannot iomap Apple AirPort card\n");
+		return;
+	}
+
+	pr_info("Resetting Apple AirPort card (left enabled by EFI)\n");
+
+	for (i = 0; bcma_aread32(BCMA_RESET_ST) && i < 30; i++)
+		udelay(10);
+
+	bcma_awrite32(BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	bcma_aread32(BCMA_RESET_CTL);
+	udelay(1);
+
+	bcma_awrite32(BCMA_RESET_CTL, 0);
+	bcma_aread32(BCMA_RESET_CTL);
+	udelay(10);
+
+	early_iounmap(mmio, BCM4331_MMIO_SIZE);
+}
 
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
@@ -603,12 +672,6 @@ struct chipset {
 	void (*f)(int num, int slot, int func);
 };
 
-/*
- * Only works for devices on the root bus. If you add any devices
- * not on bus 0 readd another loop level in early_quirks(). But
- * be careful because at least the Nvidia quirk here relies on
- * only matching on bus 0.
- */
 static struct chipset early_qrk[] __initdata = {
 	{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
@@ -638,9 +701,13 @@ static struct chipset early_qrk[] __initdata = {
 	 */
 	{ PCI_VENDOR_ID_INTEL, 0x0f00,
 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
+	{ PCI_VENDOR_ID_BROADCOM, 0x4331,
+	  PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset},
 	{}
 };
 
+static void __init early_pci_scan_bus(int bus);
+
 /**
  * check_dev_quirk - apply early quirks to a given PCI device
  * @num: bus number
@@ -649,7 +716,7 @@ static struct chipset early_qrk[] __initdata = {
  *
  * Check the vendor & device ID against the early quirks table.
  *
- * If the device is single function, let early_quirks() know so we don't
+ * If the device is single function, let early_pci_scan_bus() know so we don't
  * poke at this device again.
  */
 static int __init check_dev_quirk(int num, int slot, int func)
@@ -658,6 +725,7 @@ static int __init check_dev_quirk(int num, int slot, int func)
 	u16 vendor;
 	u16 device;
 	u8 type;
+	u8 sec;
 	int i;
 
 	class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
@@ -685,25 +753,36 @@ static int __init check_dev_quirk(int num, int slot, int func)
 
 	type = read_pci_config_byte(num, slot, func,
 				    PCI_HEADER_TYPE);
+
+	if ((type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) {
+		sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS);
+		if (sec > num)
+			early_pci_scan_bus(sec);
+	}
+
 	if (!(type & 0x80))
 		return -1;
 
 	return 0;
 }
 
-void __init early_quirks(void)
+static void __init early_pci_scan_bus(int bus)
 {
 	int slot, func;
 
-	if (!early_pci_allowed())
-		return;
-
 	/* Poor man's PCI discovery */
-	/* Only scan the root bus */
 	for (slot = 0; slot < 32; slot++)
 		for (func = 0; func < 8; func++) {
 			/* Only probe function 0 on single fn devices */
-			if (check_dev_quirk(0, slot, func))
+			if (check_dev_quirk(bus, slot, func))
 				break;
 		}
 }
+
+void __init early_quirks(void)
+{
+	if (!early_pci_allowed())
+		return;
+
+	early_pci_scan_bus(0);
+}

arch/x86/kernel/pvclock.c

@@ -61,11 +61,16 @@ void pvclock_resume(void)
 u8 pvclock_read_flags(struct pvclock_vcpu_time_info *src)
 {
 	unsigned version;
-	cycle_t ret;
 	u8 flags;
 
 	do {
-		version = __pvclock_read_cycles(src, &ret, &flags);
+		version = src->version;
+		/* Make the latest version visible */
+		smp_rmb();
+
+		flags = src->flags;
+		/* Make sure that the version double-check is last. */
+		smp_rmb();
 	} while ((src->version & 1) || version != src->version);
 
 	return flags & valid_flags;
@@ -80,6 +85,8 @@ cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
 
 	do {
 		version = __pvclock_read_cycles(src, &ret, &flags);
+		/* Make sure that the version double-check is last. */
+		smp_rmb();
 	} while ((src->version & 1) || version != src->version);
 
 	if (unlikely((flags & PVCLOCK_GUEST_STOPPED) != 0)) {

arch/x86/kvm/lapic.c

@@ -1310,7 +1310,8 @@ void wait_lapic_expire(struct kvm_vcpu *vcpu)
 
 	/* __delay is delay_tsc whenever the hardware has TSC, thus always.  */
 	if (guest_tsc < tsc_deadline)
-		__delay(tsc_deadline - guest_tsc);
+		__delay(min(tsc_deadline - guest_tsc,
+			nsec_to_cycles(vcpu, lapic_timer_advance_ns)));
 }
 
 static void start_apic_timer(struct kvm_lapic *apic)

arch/x86/kvm/vmx.c

@@ -6671,7 +6671,13 @@ static int get_vmx_mem_address(struct kvm_vcpu *vcpu,
 
 	/* Checks for #GP/#SS exceptions. */
 	exn = false;
-	if (is_protmode(vcpu)) {
+	if (is_long_mode(vcpu)) {
+		/* Long mode: #GP(0)/#SS(0) if the memory address is in a
+		 * non-canonical form. This is the only check on the memory
+		 * destination for long mode!
+		 */
+		exn = is_noncanonical_address(*ret);
+	} else if (is_protmode(vcpu)) {
 		/* Protected mode: apply checks for segment validity in the
 		 * following order:
 		 * - segment type check (#GP(0) may be thrown)
@@ -6688,17 +6694,10 @@ static int get_vmx_mem_address(struct kvm_vcpu *vcpu,
 			 * execute-only code segment
 			 */
 			exn = ((s.type & 0xa) == 8);
-	}
 		if (exn) {
 			kvm_queue_exception_e(vcpu, GP_VECTOR, 0);
 			return 1;
 		}
-	if (is_long_mode(vcpu)) {
-		/* Long mode: #GP(0)/#SS(0) if the memory address is in a
-		 * non-canonical form. This is an only check for long mode.
-		 */
-		exn = is_noncanonical_address(*ret);
-	} else if (is_protmode(vcpu)) {
 		/* Protected mode: #GP(0)/#SS(0) if the segment is unusable.
 		 */
 		exn = (s.unusable != 0);

arch/x86/kvm/x86.c

@@ -1244,12 +1244,6 @@ static atomic_t kvm_guest_has_master_clock = ATOMIC_INIT(0);
 static DEFINE_PER_CPU(unsigned long, cpu_tsc_khz);
 static unsigned long max_tsc_khz;
 
-static inline u64 nsec_to_cycles(struct kvm_vcpu *vcpu, u64 nsec)
-{
-	return pvclock_scale_delta(nsec, vcpu->arch.virtual_tsc_mult,
-				   vcpu->arch.virtual_tsc_shift);
-}
-
 static u32 adjust_tsc_khz(u32 khz, s32 ppm)
 {
 	u64 v = (u64)khz * (1000000 + ppm);

arch/x86/kvm/x86.h

@@ -2,6 +2,7 @@
 #define ARCH_X86_KVM_X86_H
 
 #include <linux/kvm_host.h>
+#include <asm/pvclock.h>
 #include "kvm_cache_regs.h"
 
 #define MSR_IA32_CR_PAT_DEFAULT  0x0007040600070406ULL
@@ -195,6 +196,12 @@ extern unsigned int lapic_timer_advance_ns;
 
 extern struct static_key kvm_no_apic_vcpu;
 
+static inline u64 nsec_to_cycles(struct kvm_vcpu *vcpu, u64 nsec)
+{
+	return pvclock_scale_delta(nsec, vcpu->arch.virtual_tsc_mult,
+				   vcpu->arch.virtual_tsc_shift);
+}
+
 /* Same "calling convention" as do_div:
  * - divide (n << 32) by base
  * - put result in n

arch/x86/mm/kasan_init_64.c

@@ -54,8 +54,8 @@ static int kasan_die_handler(struct notifier_block *self,
 			     void *data)
 {
 	if (val == DIE_GPF) {
-		pr_emerg("CONFIG_KASAN_INLINE enabled");
+		pr_emerg("CONFIG_KASAN_INLINE enabled\n");
-		pr_emerg("GPF could be caused by NULL-ptr deref or user memory access");
+		pr_emerg("GPF could be caused by NULL-ptr deref or user memory access\n");
 	}
 	return NOTIFY_OK;
 }

arch/x86/pci/acpi.c

@@ -396,6 +396,7 @@ int __init pci_acpi_init(void)
 		return -ENODEV;
 
 	printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
+	acpi_irq_penalty_init();
 	pcibios_enable_irq = acpi_pci_irq_enable;
 	pcibios_disable_irq = acpi_pci_irq_disable;
 	x86_init.pci.init_irq = x86_init_noop;

arch/x86/power/hibernate_64.c

@@ -19,6 +19,7 @@
 #include <asm/mtrr.h>
 #include <asm/sections.h>
 #include <asm/suspend.h>
+#include <asm/tlbflush.h>
 
 /* Defined in hibernate_asm_64.S */
 extern asmlinkage __visible int restore_image(void);
@@ -28,6 +29,7 @@ extern asmlinkage __visible int restore_image(void);
  * kernel's text (this value is passed in the image header).
  */
 unsigned long restore_jump_address __visible;
+unsigned long jump_address_phys;
 
 /*
  * Value of the cr3 register from before the hibernation (this value is passed
@@ -37,7 +39,43 @@ unsigned long restore_cr3 __visible;
 
 pgd_t *temp_level4_pgt __visible;
 
-void *relocated_restore_code __visible;
+unsigned long relocated_restore_code __visible;
+
+static int set_up_temporary_text_mapping(void)
+{
+	pmd_t *pmd;
+	pud_t *pud;
+
+	/*
+	 * The new mapping only has to cover the page containing the image
+	 * kernel's entry point (jump_address_phys), because the switch over to
+	 * it is carried out by relocated code running from a page allocated
+	 * specifically for this purpose and covered by the identity mapping, so
+	 * the temporary kernel text mapping is only needed for the final jump.
+	 * Moreover, in that mapping the virtual address of the image kernel's
+	 * entry point must be the same as its virtual address in the image
+	 * kernel (restore_jump_address), so the image kernel's
+	 * restore_registers() code doesn't find itself in a different area of
+	 * the virtual address space after switching over to the original page
+	 * tables used by the image kernel.
+	 */
+	pud = (pud_t *)get_safe_page(GFP_ATOMIC);
+	if (!pud)
+		return -ENOMEM;
+
+	pmd = (pmd_t *)get_safe_page(GFP_ATOMIC);
+	if (!pmd)
+		return -ENOMEM;
+
+	set_pmd(pmd + pmd_index(restore_jump_address),
+		__pmd((jump_address_phys & PMD_MASK) | __PAGE_KERNEL_LARGE_EXEC));
+	set_pud(pud + pud_index(restore_jump_address),
+		__pud(__pa(pmd) | _KERNPG_TABLE));
+	set_pgd(temp_level4_pgt + pgd_index(restore_jump_address),
+		__pgd(__pa(pud) | _KERNPG_TABLE));
+
+	return 0;
+}
 
 static void *alloc_pgt_page(void *context)
 {
@@ -59,9 +97,10 @@ static int set_up_temporary_mappings(void)
 	if (!temp_level4_pgt)
 		return -ENOMEM;
 
-	/* It is safe to reuse the original kernel mapping */
+	/* Prepare a temporary mapping for the kernel text */
-	set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
+	result = set_up_temporary_text_mapping();
-		init_level4_pgt[pgd_index(__START_KERNEL_map)]);
+	if (result)
+		return result;
 
 	/* Set up the direct mapping from scratch */
 	for (i = 0; i < nr_pfn_mapped; i++) {
@@ -78,19 +117,50 @@ static int set_up_temporary_mappings(void)
 	return 0;
 }
 
+static int relocate_restore_code(void)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+
+	relocated_restore_code = get_safe_page(GFP_ATOMIC);
+	if (!relocated_restore_code)
+		return -ENOMEM;
+
+	memcpy((void *)relocated_restore_code, &core_restore_code, PAGE_SIZE);
+
+	/* Make the page containing the relocated code executable */
+	pgd = (pgd_t *)__va(read_cr3()) + pgd_index(relocated_restore_code);
+	pud = pud_offset(pgd, relocated_restore_code);
+	if (pud_large(*pud)) {
+		set_pud(pud, __pud(pud_val(*pud) & ~_PAGE_NX));
+	} else {
+		pmd_t *pmd = pmd_offset(pud, relocated_restore_code);
+
+		if (pmd_large(*pmd)) {
+			set_pmd(pmd, __pmd(pmd_val(*pmd) & ~_PAGE_NX));
+		} else {
+			pte_t *pte = pte_offset_kernel(pmd, relocated_restore_code);
+
+			set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_NX));
+		}
+	}
+	__flush_tlb_all();
+
+	return 0;
+}
+
 int swsusp_arch_resume(void)
 {
 	int error;
 
 	/* We have got enough memory and from now on we cannot recover */
-	if ((error = set_up_temporary_mappings()))
+	error = set_up_temporary_mappings();
+	if (error)
 		return error;
 
-	relocated_restore_code = (void *)get_safe_page(GFP_ATOMIC);
+	error = relocate_restore_code();
-	if (!relocated_restore_code)
+	if (error)
-		return -ENOMEM;
+		return error;
-	memcpy(relocated_restore_code, &core_restore_code,
-	       &restore_registers - &core_restore_code);
 
 	restore_image();
 	return 0;
@@ -109,11 +179,12 @@ int pfn_is_nosave(unsigned long pfn)
 
 struct restore_data_record {
 	unsigned long jump_address;
+	unsigned long jump_address_phys;
 	unsigned long cr3;
 	unsigned long magic;
 };
 
-#define RESTORE_MAGIC	0x0123456789ABCDEFUL
+#define RESTORE_MAGIC	0x123456789ABCDEF0UL
 
 /**
  *	arch_hibernation_header_save - populate the architecture specific part
@@ -126,7 +197,8 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size)
 
 	if (max_size < sizeof(struct restore_data_record))
 		return -EOVERFLOW;
-	rdr->jump_address = restore_jump_address;
+	rdr->jump_address = (unsigned long)&restore_registers;
+	rdr->jump_address_phys = __pa_symbol(&restore_registers);
 	rdr->cr3 = restore_cr3;
 	rdr->magic = RESTORE_MAGIC;
 	return 0;
@@ -142,6 +214,7 @@ int arch_hibernation_header_restore(void *addr)
 	struct restore_data_record *rdr = addr;
 
 	restore_jump_address = rdr->jump_address;
+	jump_address_phys = rdr->jump_address_phys;
 	restore_cr3 = rdr->cr3;
 	return (rdr->magic == RESTORE_MAGIC) ? 0 : -EINVAL;
 }

arch/x86/power/hibernate_asm_64.S

@@ -44,9 +44,6 @@ ENTRY(swsusp_arch_suspend)
 	pushfq
 	popq	pt_regs_flags(%rax)
 
-	/* save the address of restore_registers */
-	movq	$restore_registers, %rax
-	movq	%rax, restore_jump_address(%rip)
 	/* save cr3 */
 	movq	%cr3, %rax
 	movq	%rax, restore_cr3(%rip)
@@ -57,31 +54,34 @@ ENTRY(swsusp_arch_suspend)
 ENDPROC(swsusp_arch_suspend)
 
 ENTRY(restore_image)
-	/* switch to temporary page tables */
-	movq	$__PAGE_OFFSET, %rdx
-	movq	temp_level4_pgt(%rip), %rax
-	subq	%rdx, %rax
-	movq	%rax, %cr3
-	/* Flush TLB */
-	movq	mmu_cr4_features(%rip), %rax
-	movq	%rax, %rdx
-	andq	$~(X86_CR4_PGE), %rdx
-	movq	%rdx, %cr4;  # turn off PGE
-	movq	%cr3, %rcx;  # flush TLB
-	movq	%rcx, %cr3;
-	movq	%rax, %cr4;  # turn PGE back on
-
 	/* prepare to jump to the image kernel */
-	movq	restore_jump_address(%rip), %rax
+	movq	restore_jump_address(%rip), %r8
-	movq	restore_cr3(%rip), %rbx
+	movq	restore_cr3(%rip), %r9
+
+	/* prepare to switch to temporary page tables */
+	movq	temp_level4_pgt(%rip), %rax
+	movq	mmu_cr4_features(%rip), %rbx
 
 	/* prepare to copy image data to their original locations */
 	movq	restore_pblist(%rip), %rdx
+
+	/* jump to relocated restore code */
 	movq	relocated_restore_code(%rip), %rcx
 	jmpq	*%rcx
 
 	/* code below has been relocated to a safe page */
 ENTRY(core_restore_code)
+	/* switch to temporary page tables */
+	movq	$__PAGE_OFFSET, %rcx
+	subq	%rcx, %rax
+	movq	%rax, %cr3
+	/* flush TLB */
+	movq	%rbx, %rcx
+	andq	$~(X86_CR4_PGE), %rcx
+	movq	%rcx, %cr4;  # turn off PGE
+	movq	%cr3, %rcx;  # flush TLB
+	movq	%rcx, %cr3;
+	movq	%rbx, %cr4;  # turn PGE back on
 .Lloop:
 	testq	%rdx, %rdx
 	jz	.Ldone
@@ -96,24 +96,17 @@ ENTRY(core_restore_code)
 	/* progress to the next pbe */
 	movq	pbe_next(%rdx), %rdx
 	jmp	.Lloop
+
 .Ldone:
 	/* jump to the restore_registers address from the image header */
-	jmpq	*%rax
+	jmpq	*%r8
-	/*
-	 * NOTE: This assumes that the boot kernel's text mapping covers the
-	 * image kernel's page containing restore_registers and the address of
-	 * this page is the same as in the image kernel's text mapping (it
-	 * should always be true, because the text mapping is linear, starting
-	 * from 0, and is supposed to cover the entire kernel text for every
-	 * kernel).
-	 *
-	 * code below belongs to the image kernel
-	 */
 
+	 /* code below belongs to the image kernel */
+	.align PAGE_SIZE
 ENTRY(restore_registers)
 	FRAME_BEGIN
 	/* go back to the original page tables */
-	movq    %rbx, %cr3
+	movq    %r9, %cr3
 
 	/* Flush TLB, including "global" things (vmalloc) */
 	movq	mmu_cr4_features(%rip), %rax

block/ioprio.c

@@ -150,8 +150,10 @@ static int get_task_ioprio(struct task_struct *p)
 	if (ret)
 		goto out;
 	ret = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_NONE, IOPRIO_NORM);
+	task_lock(p);
 	if (p->io_context)
 		ret = p->io_context->ioprio;
+	task_unlock(p);
 out:
 	return ret;
 }

crypto/asymmetric_keys/mscode_parser.c

@@ -124,5 +124,10 @@ int mscode_note_digest(void *context, size_t hdrlen,
 	struct pefile_context *ctx = context;
 
 	ctx->digest = kmemdup(value, vlen, GFP_KERNEL);
-	return ctx->digest ? 0 : -ENOMEM;
+	if (!ctx->digest)
+		return -ENOMEM;
+
+	ctx->digest_len = vlen;
+
+	return 0;
 }

crypto/asymmetric_keys/pkcs7_verify.c

@@ -227,7 +227,7 @@ static int pkcs7_verify_sig_chain(struct pkcs7_message *pkcs7,
 				if (asymmetric_key_id_same(p->id, auth))
 					goto found_issuer_check_skid;
 			}
-		} else {
+		} else if (sig->auth_ids[1]) {
 			auth = sig->auth_ids[1];
 			pr_debug("- want %*phN\n", auth->len, auth->data);
 			for (p = pkcs7->certs; p; p = p->next) {

crypto/asymmetric_keys/restrict.c

@@ -87,7 +87,7 @@ int restrict_link_by_signature(struct key *trust_keyring,
 
 	sig = payload->data[asym_auth];
 	if (!sig->auth_ids[0] && !sig->auth_ids[1])
-		return 0;
+		return -ENOKEY;
 
 	if (ca_keyid && !asymmetric_key_id_partial(sig->auth_ids[1], ca_keyid))
 		return -EPERM;

crypto/crypto_user.c

@@ -455,6 +455,7 @@ static const int crypto_msg_min[CRYPTO_NR_MSGTYPES] = {
 	[CRYPTO_MSG_NEWALG	- CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg),
 	[CRYPTO_MSG_DELALG	- CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg),
 	[CRYPTO_MSG_UPDATEALG	- CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg),
+	[CRYPTO_MSG_GETALG	- CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg),
 	[CRYPTO_MSG_DELRNG	- CRYPTO_MSG_BASE] = 0,
 };