clocksource/drivers/hyperv: add data structure for reference TSC MSR

Add a data structure to represent the reference TSC MSR similar to
other MSRs. This simplifies the code for updating the MSR.

Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221027095729.1676394-2-anrayabh@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>

drivers/clocksource/hyperv_timer.c

@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/acpi.h>
+#include <linux/hyperv.h>
 #include <clocksource/hyperv_timer.h>
 #include <asm/hyperv-tlfs.h>
 #include <asm/mshyperv.h>
@@ -395,25 +396,25 @@ static u64 notrace read_hv_sched_clock_tsc(void)
 
 static void suspend_hv_clock_tsc(struct clocksource *arg)
 {
-	u64 tsc_msr;
+	union hv_reference_tsc_msr tsc_msr;
 
 	/* Disable the TSC page */
-	tsc_msr = hv_get_register(HV_REGISTER_REFERENCE_TSC);
+	tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
-	tsc_msr &= ~BIT_ULL(0);
+	tsc_msr.enable = 0;
-	hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr);
+	hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
 }
 
 
 static void resume_hv_clock_tsc(struct clocksource *arg)
 {
 	phys_addr_t phys_addr = virt_to_phys(&tsc_pg);
-	u64 tsc_msr;
+	union hv_reference_tsc_msr tsc_msr;
 
 	/* Re-enable the TSC page */
-	tsc_msr = hv_get_register(HV_REGISTER_REFERENCE_TSC);
+	tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
-	tsc_msr &= GENMASK_ULL(11, 0);
+	tsc_msr.enable = 1;
-	tsc_msr |= BIT_ULL(0) | (u64)phys_addr;
+	tsc_msr.pfn = HVPFN_DOWN(phys_addr);
-	hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr);
+	hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
 }
 
 #ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK
@@ -495,7 +496,7 @@ static __always_inline void hv_setup_sched_clock(void *sched_clock) {}
 
 static bool __init hv_init_tsc_clocksource(void)
 {
-	u64		tsc_msr;
+	union hv_reference_tsc_msr tsc_msr;
 	phys_addr_t	phys_addr;
 
 	if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
@@ -530,10 +531,10 @@ static bool __init hv_init_tsc_clocksource(void)
 	 * (which already has at least the low 12 bits set to zero since
 	 * it is page aligned). Also set the "enable" bit, which is bit 0.
 	 */
-	tsc_msr = hv_get_register(HV_REGISTER_REFERENCE_TSC);
+	tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
-	tsc_msr &= GENMASK_ULL(11, 0);
+	tsc_msr.enable = 1;
-	tsc_msr = tsc_msr | 0x1 | (u64)phys_addr;
+	tsc_msr.pfn = HVPFN_DOWN(phys_addr);
-	hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr);
+	hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
 
 	clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
 

include/asm-generic/hyperv-tlfs.h

@@ -102,6 +102,15 @@ struct ms_hyperv_tsc_page {
 	volatile s64 tsc_offset;
 } __packed;
 
+union hv_reference_tsc_msr {
+	u64 as_uint64;
+	struct {
+		u64 enable:1;
+		u64 reserved:11;
+		u64 pfn:52;
+	} __packed;
+};
+
 /*
  * The guest OS needs to register the guest ID with the hypervisor.
  * The guest ID is a 64 bit entity and the structure of this ID is