ARM: dts: bcm283x: Remove simple-bus from fixed clocks

The fixed clocks doesn't form some kind of bus. So let's remove it.
This fixes the follow DT schema warnings:

clocks: clock@3:reg:0: [3] is too short
clocks: clock@4:reg:0: [4] is too short
clocks: $nodename:0: 'clocks' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: 'ranges' is a required property
clock@3: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
clock@4: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>

arch/arm/boot/dts/bcm283x.dtsi

@@ -650,22 +650,16 @@
 	};
 
 	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		/* The oscillator is the root of the clock tree. */
-		clk_osc: clock@3 {
+		clk_osc: clk-osc {
 			compatible = "fixed-clock";
-			reg = <3>;
 			#clock-cells = <0>;
 			clock-output-names = "osc";
 			clock-frequency = <19200000>;
 		};
 
-		clk_usb: clock@4 {
+		clk_usb: clk-usb {
 			compatible = "fixed-clock";
-			reg = <4>;
 			#clock-cells = <0>;
 			clock-output-names = "otg";
 			clock-frequency = <480000000>;