ARM: dts: Change IOPAD macro's for OMAP4/5
The OMAP4/5 TRMs primarily list address offsets from the padconf physical address (which is not driver base address) and not always the absolute physical address for padconf registers like some other OMAP TRMs. So create a new macro to use this offset and to avoid confusion between different OMAP parts. For more information, see the tables in TRM for named something like "Device Core Control Module Pad Configuration Register Fields" and "Device Wake-Up Control Module Pad Configuration Register Fields" Note that we now also have to update cm-t54 for the fixed up offsets. Signed-off-by: Joachim Eastwood <manabian@gmail.com> [tony@atomide.com: updated comments, updated cm-t54] Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Joachim Eastwood
Tony Lindgren
Родитель
16c75a13e3
Коммит
4b466297f0
|
|
@ -77,71 +77,71 @@
|
|||
|
||||
led_gpio_pins: pinmux_led_gpio_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_CORE_IOPAD(0x28b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
|
||||
OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_CORE_IOPAD(0x29f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
|
||||
OMAP5_CORE_IOPAD(0x29f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
|
||||
OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
|
||||
OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_CORE_IOPAD(0x29e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
|
||||
OMAP5_CORE_IOPAD(0x29e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
|
||||
OMAP5_CORE_IOPAD(0x29e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
|
||||
OMAP5_CORE_IOPAD(0x29e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
|
||||
OMAP5_CORE_IOPAD(0x29ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
|
||||
OMAP5_CORE_IOPAD(0x29ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
|
||||
OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
|
||||
OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
|
||||
OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
|
||||
OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
|
||||
OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
|
||||
OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_CORE_IOPAD(0x2840, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
|
||||
OMAP5_CORE_IOPAD(0x2842, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
|
||||
OMAP5_CORE_IOPAD(0x2844, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
|
||||
OMAP5_CORE_IOPAD(0x2846, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
|
||||
OMAP5_CORE_IOPAD(0x2848, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
|
||||
OMAP5_CORE_IOPAD(0x284a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
|
||||
OMAP5_CORE_IOPAD(0x284c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
|
||||
OMAP5_CORE_IOPAD(0x284e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
|
||||
OMAP5_CORE_IOPAD(0x2850, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
|
||||
OMAP5_CORE_IOPAD(0x2852, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
|
||||
OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
|
||||
OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
|
||||
OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
|
||||
OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
|
||||
OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
|
||||
OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
|
||||
OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
|
||||
OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
|
||||
OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
|
||||
OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc3_pins: pinmux_mmc3_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_CORE_IOPAD(0x29a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
|
||||
OMAP5_CORE_IOPAD(0x29a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
|
||||
OMAP5_CORE_IOPAD(0x29a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
|
||||
OMAP5_CORE_IOPAD(0x29aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
|
||||
OMAP5_CORE_IOPAD(0x29ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
|
||||
OMAP5_CORE_IOPAD(0x29ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
|
||||
OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
|
||||
OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
|
||||
OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
|
||||
OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
|
||||
OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
|
||||
OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
|
||||
>;
|
||||
};
|
||||
|
||||
wlan_gpios_pins: pinmux_wlan_gpios_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_CORE_IOPAD(0x299c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */
|
||||
OMAP5_CORE_IOPAD(0x299e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */
|
||||
OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */
|
||||
OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */
|
||||
>;
|
||||
};
|
||||
|
||||
usbhost_pins: pinmux_usbhost_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_CORE_IOPAD(0x28c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
|
||||
OMAP5_CORE_IOPAD(0x28c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
|
||||
OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
|
||||
OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
|
||||
|
||||
OMAP5_CORE_IOPAD(0x29dc, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
|
||||
OMAP5_CORE_IOPAD(0x29de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
|
||||
OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
|
||||
OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
|
||||
|
||||
OMAP5_CORE_IOPAD(0x28a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
|
||||
OMAP5_CORE_IOPAD(0x28b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
|
||||
OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
|
||||
OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -12,15 +12,15 @@
|
|||
&omap5_pmx_core {
|
||||
i2c4_pins: pinmux_i2c4_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_CORE_IOPAD(0x28f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
|
||||
OMAP5_CORE_IOPAD(0x28fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
|
||||
OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
|
||||
OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_aux_pins: pinmux_mmc1_aux_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_CORE_IOPAD(0x2974, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */
|
||||
OMAP5_CORE_IOPAD(0x2976, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */
|
||||
OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */
|
||||
OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -62,12 +62,17 @@
|
|||
#define OMAP3630_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25a0) (val)
|
||||
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
|
||||
#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
|
||||
#define OMAP4_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0040) (val)
|
||||
#define OMAP4_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0xe040) (val)
|
||||
#define AM4372_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
|
||||
#define OMAP5_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2840) (val)
|
||||
#define OMAP5_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0xc840) (val)
|
||||
#define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
|
||||
|
||||
/*
|
||||
* Macros to allow using the offset from the padconf physical address
|
||||
* instead of the offset from padconf base.
|
||||
*/
|
||||
#define OMAP_PADCONF_OFFSET(offset, base_offset) ((offset) - (base_offset))
|
||||
|
||||
#define OMAP4_IOPAD(offset, val) OMAP_PADCONF_OFFSET((offset), 0x0040) (val)
|
||||
#define OMAP5_IOPAD(offset, val) OMAP_PADCONF_OFFSET((offset), 0x0040) (val)
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче