sh: Add div6_reparent_clks to clock framework for FSI

Current clk_ops doesn't support .init which
is used to select external clock on ecovec
without CONFIG_SH_CLK_CPG_LEGACY.
To solve this problem, this patch add div6_reparent_clks
to clock-sh7724.
This patch solve compile error too.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Kuninori Morimoto 2010-11-26 09:40:22 +00:00 коммит произвёл Paul Mundt
Родитель e5843341e3
Коммит 4bd5d259e4
3 изменённых файлов: 46 добавлений и 35 удалений

Просмотреть файл

@ -720,32 +720,6 @@ static struct platform_device camera_devices[] = {
};
/* FSI */
/*
* FSI-B use external clock which came from da7210.
* So, we should change parent of fsi
*/
#define FCLKBCR 0xa415000c
static void fsimck_init(struct clk *clk)
{
u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
__raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
.init = fsimck_init,
};
static struct clk fsimckb_clk = {
.ops = &fsimck_clk_ops,
.enable_reg = (void __iomem *)FCLKBCR,
.rate = 0, /* unknown */
};
static struct sh_fsi_platform_info fsi_info = {
.portb_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
@ -1264,10 +1238,10 @@ static int __init arch_setup(void)
/* change parent of FSI B */
clk = clk_get(NULL, "fsib_clk");
if (!IS_ERR(clk)) {
clk_register(&fsimckb_clk);
clk_set_parent(clk, &fsimckb_clk);
clk_set_rate(clk, 11000);
clk_set_rate(&fsimckb_clk, 11000);
/* 48kHz dummy clock was used to make sure 1/1 divide */
clk_set_rate(&sh7724_fsimckb_clk, 48000);
clk_set_parent(clk, &sh7724_fsimckb_clk);
clk_set_rate(clk, 48000);
clk_put(clk);
}

Просмотреть файл

@ -303,4 +303,7 @@ enum {
SHDMA_SLAVE_SDHI1_RX,
};
extern struct clk sh7724_fsimcka_clk;
extern struct clk sh7724_fsimckb_clk;
#endif /* __ASM_SH7724_H__ */

Просмотреть файл

@ -111,12 +111,21 @@ static struct clk div3_clk = {
.parent = &pll_clk,
};
/* External input clock (pin name: FSIMCKA/FSIMCKB ) */
struct clk sh7724_fsimcka_clk = {
};
struct clk sh7724_fsimckb_clk = {
};
static struct clk *main_clks[] = {
&r_clk,
&extal_clk,
&fll_clk,
&pll_clk,
&div3_clk,
&sh7724_fsimcka_clk,
&sh7724_fsimckb_clk,
};
static void div4_kick(struct clk *clk)
@ -154,16 +163,38 @@ struct clk div4_clks[DIV4_NR] = {
[DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
};
enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR };
static struct clk div6_clks[DIV6_NR] = {
[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
[DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
[DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
[DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0),
[DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
};
enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR };
/* Indices are important - they are the actual src selecting values */
static struct clk *fclkacr_parent[] = {
[0] = &div3_clk,
[1] = NULL,
[2] = &sh7724_fsimcka_clk,
[3] = NULL,
};
static struct clk *fclkbcr_parent[] = {
[0] = &div3_clk,
[1] = NULL,
[2] = &sh7724_fsimckb_clk,
[3] = NULL,
};
static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
[DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0,
fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
[DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0,
fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
};
static struct clk mstp_clks[HWBLK_NR] = {
SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
@ -240,8 +271,8 @@ static struct clk_lookup lookups[] = {
/* DIV6 clocks */
CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]),
CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]),
CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
@ -375,6 +406,9 @@ int __init arch_clk_init(void)
if (!ret)
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
if (!ret)
ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);