ARM: mx5/mm: consolidate TZIC map code

Use a static mapping for TZIC to get rid of the duplicated code for
ioremap and the corresponding error handling. This is already done on
i.MX50.

This patch also removes TZIC mapping for i.mx51 TO1 since
there is no support for TO1 now since the following commit:
9ab4650 (ARM: imx: Get the silicon version from the IIM module)

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

arch/arm/mach-mx5/mm.c

@@ -35,6 +35,7 @@ static struct map_desc mx50_io_desc[] __initdata = {
  * Define the MX51 memory map.
  */
 static struct map_desc mx51_io_desc[] __initdata = {
+	imx_map_entry(MX51, TZIC, MT_DEVICE),
 	imx_map_entry(MX51, IRAM, MT_DEVICE),
 	imx_map_entry(MX51, AIPS1, MT_DEVICE),
 	imx_map_entry(MX51, SPBA0, MT_DEVICE),
@@ -45,6 +46,7 @@ static struct map_desc mx51_io_desc[] __initdata = {
  * Define the MX53 memory map.
  */
 static struct map_desc mx53_io_desc[] __initdata = {
+	imx_map_entry(MX53, TZIC, MT_DEVICE),
 	imx_map_entry(MX53, AIPS1, MT_DEVICE),
 	imx_map_entry(MX53, SPBA0, MT_DEVICE),
 	imx_map_entry(MX53, AIPS2, MT_DEVICE),
@@ -98,33 +100,12 @@ void __init mx50_init_irq(void)
 
 void __init mx51_init_irq(void)
 {
-	unsigned long tzic_addr;
-	void __iomem *tzic_virt;
-
-	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
-		tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
-	else
-		tzic_addr = MX51_TZIC_BASE_ADDR;
-
-	tzic_virt = ioremap(tzic_addr, SZ_16K);
-	if (!tzic_virt)
-		panic("unable to map TZIC interrupt controller\n");
-
-	tzic_init_irq(tzic_virt);
+	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
 }
 
 void __init mx53_init_irq(void)
 {
-	unsigned long tzic_addr;
-	void __iomem *tzic_virt;
-
-	tzic_addr = MX53_TZIC_BASE_ADDR;
-
-	tzic_virt = ioremap(tzic_addr, SZ_16K);
-	if (!tzic_virt)
-		panic("unable to map TZIC interrupt controller\n");
-
-	tzic_init_irq(tzic_virt);
+	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
 }
 
 static struct sdma_script_start_addrs imx51_sdma_script __initdata = {

arch/arm/plat-mxc/include/mach/hardware.h

@@ -81,10 +81,16 @@
  *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
  * mx51:
+ *	TZIC	0xe0000000+0x004000	->	0xf5000000+0x004000
  *	IRAM	0x1ffe0000+0x020000	->	0xf4fe0000+0x020000
  *	SPBA0	0x70000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x73f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x83f00000+0x100000	->	0xf4300000+0x100000
+ * mx53:
+ *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
+ *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
  */
 #define IMX_IO_P2V(x)	(						\
 			0xf4000000 +					\

arch/arm/plat-mxc/include/mach/mx51.h

@@ -120,6 +120,7 @@
 
 #define MX51_GPU2D_BASE_ADDR		0xd0000000
 #define MX51_TZIC_BASE_ADDR		0xe0000000
+#define MX51_TZIC_SIZE			SZ_16K
 
 #define MX51_IO_P2V(x)			IMX_IO_P2V(x)
 #define MX51_IO_ADDRESS(x)		IOMEM(MX51_IO_P2V(x))
@@ -338,7 +339,4 @@ extern int mx51_revision(void);
 extern void mx51_display_revision(void);
 #endif
 
-/* tape-out 1 defines */
-#define MX51_TZIC_BASE_ADDR_TO1		0x8fffc000
-
 #endif	/* ifndef __MACH_MX51_H__ */

arch/arm/plat-mxc/include/mach/mx53.h

@@ -9,6 +9,7 @@
 
 /* TZIC */
 #define MX53_TZIC_BASE_ADDR		0x0FFFC000
+#define MX53_TZIC_SIZE			SZ_16K
 
 /*
  * AHCI SATA