diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 7cea769c37df..618afeefbc73 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -336,7 +336,7 @@ config ACPI_CUSTOM_DSDT_FILE
 	  See Documentation/acpi/dsdt-override.txt
 
 	  Enter the full path name to the file which includes the AmlCode
-	  declaration.
+	  or dsdt_aml_code declaration.
 
 	  If unsure, don't enter a file name.
 
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 2664452fa112..ddf598ae8b6b 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -166,6 +166,11 @@ static const struct apd_device_desc thunderx2_i2c_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 125000000,
 };
+
+static const struct apd_device_desc hip08_spi_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 250000000,
+};
 #endif
 
 #else
@@ -234,6 +239,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
 	{ "CAV9007",  APD_ADDR(thunderx2_i2c_desc) },
 	{ "HISI02A1", APD_ADDR(hip07_i2c_desc) },
 	{ "HISI02A2", APD_ADDR(hip08_i2c_desc) },
+	{ "HISI0173", APD_ADDR(hip08_spi_desc) },
 #endif
 	{ }
 };
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index b9bda06d344d..5f94c35d165f 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -673,12 +673,7 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
 	 * have _PS0 and _PS3 without _PSC (and no power resources), so
 	 * acpi_bus_init_power() will assume that the BIOS has put them into D0.
 	 */
-	ret = acpi_device_fix_up_power(adev);
-	if (ret) {
-		/* Skip the device, but continue the namespace scan. */
-		ret = 0;
-		goto err_out;
-	}
+	acpi_device_fix_up_power(adev);
 
 	adev->driver_data = pdata;
 	pdev = acpi_create_platform_device(adev, dev_desc->properties);
diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c
index b38737c83a24..fcccbfdbdd1a 100644
--- a/drivers/acpi/apei/einj.c
+++ b/drivers/acpi/apei/einj.c
@@ -607,17 +607,7 @@ static int available_error_type_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int available_error_type_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, available_error_type_show, NULL);
-}
-
-static const struct file_operations available_error_type_fops = {
-	.open		= available_error_type_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(available_error_type);
 
 static int error_type_get(void *data, u64 *val)
 {
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 02c6fd9caff7..f008ba7c9ced 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -691,6 +691,8 @@ static void __ghes_panic(struct ghes *ghes)
 {
 	__ghes_print_estatus(KERN_EMERG, ghes->generic, ghes->estatus);
 
+	ghes_clear_estatus(ghes);
+
 	/* reboot to log the error! */
 	if (!panic_timeout)
 		panic_timeout = ghes_panic_timeout;
diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
index 9d52743080a4..c336784d0bcb 100644
--- a/drivers/acpi/spcr.c
+++ b/drivers/acpi/spcr.c
@@ -148,6 +148,13 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
 	}
 
 	switch (table->baud_rate) {
+	case 0:
+		/*
+		 * SPCR 1.04 defines 0 as a preconfigured state of UART.
+		 * Assume firmware or bootloader configures console correctly.
+		 */
+		baud_rate = 0;
+		break;
 	case 3:
 		baud_rate = 9600;
 		break;
@@ -196,6 +203,10 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
 		 * UART so don't attempt to change to the baud rate state
 		 * in the table because driver cannot calculate the dividers
 		 */
+		baud_rate = 0;
+	}
+
+	if (!baud_rate) {
 		snprintf(opts, sizeof(opts), "%s,%s,0x%llx", uart, iotype,
 			 table->serial_port.address);
 	} else {
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 61203eebf3a1..48eabb6c2d4f 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -712,6 +712,11 @@ acpi_os_physical_table_override(struct acpi_table_header *existing_table,
 					  table_length);
 }
 
+#ifdef CONFIG_ACPI_CUSTOM_DSDT
+static void *amlcode __attribute__ ((weakref("AmlCode")));
+static void *dsdt_amlcode __attribute__ ((weakref("dsdt_aml_code")));
+#endif
+
 acpi_status
 acpi_os_table_override(struct acpi_table_header *existing_table,
 		       struct acpi_table_header **new_table)
@@ -722,8 +727,11 @@ acpi_os_table_override(struct acpi_table_header *existing_table,
 	*new_table = NULL;
 
 #ifdef CONFIG_ACPI_CUSTOM_DSDT
-	if (strncmp(existing_table->signature, "DSDT", 4) == 0)
-		*new_table = (struct acpi_table_header *)AmlCode;
+	if (!strncmp(existing_table->signature, "DSDT", 4)) {
+		*new_table = (struct acpi_table_header *)&amlcode;
+		if (!(*new_table))
+			*new_table = (struct acpi_table_header *)&dsdt_amlcode;
+	}
 #endif
 	if (*new_table != NULL)
 		acpi_table_taint(existing_table);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index ed80f147bd50..f788cdbbd1b0 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -101,7 +101,7 @@ static inline bool has_acpi_companion(struct device *dev)
 static inline void acpi_preset_companion(struct device *dev,
 					 struct acpi_device *parent, u64 addr)
 {
-	ACPI_COMPANION_SET(dev, acpi_find_child_device(parent, addr, NULL));
+	ACPI_COMPANION_SET(dev, acpi_find_child_device(parent, addr, false));
 }
 
 static inline const char *acpi_dev_name(struct acpi_device *adev)