power: supply: bq27xxx: Add support for BQ78Z100
Add support for TI BQ78Z100, I2C interface gas gauge. It provides a fully integrated safety protection and authentication for 1 to 2-series cell Li-Ion and Li-Polymer battery packs. The patch was tested with BQ78Z100 equipment. CASE I: Discharging: POWER_SUPPLY_NAME=bq78z100-0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_VOLTAGE_NOW=3386000 POWER_SUPPLY_CURRENT_NOW=-5000 POWER_SUPPLY_CAPACITY=27 POWER_SUPPLY_CAPACITY_LEVEL=Normal POWER_SUPPLY_TEMP=269 POWER_SUPPLY_TIME_TO_EMPTY_NOW=1249920 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CHARGE_FULL=6494000 POWER_SUPPLY_CHARGE_NOW=1736000 POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 POWER_SUPPLY_CYCLE_COUNT=1 POWER_SUPPLY_POWER_AVG=-20000 POWER_SUPPLY_HEALTH=Good POWER_SUPPLY_MANUFACTURER=Texas Instruments CASE II : No discharging current: POWER_SUPPLY_NAME=bq78z100-0 POWER_SUPPLY_STATUS=Not charging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_VOLTAGE_NOW=3386000 POWER_SUPPLY_CURRENT_NOW=0 POWER_SUPPLY_CAPACITY=27 POWER_SUPPLY_CAPACITY_LEVEL=Normal POWER_SUPPLY_TEMP=270 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CHARGE_FULL=6494000 POWER_SUPPLY_CHARGE_NOW=1734000 POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 POWER_SUPPLY_CYCLE_COUNT=1 POWER_SUPPLY_POWER_AVG=0 POWER_SUPPLY_HEALTH=Good POWER_SUPPLY_MANUFACTURER=Texas Instruments Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This commit is contained in:
Родитель
83ee068199
Коммит
4eed7f5a83
|
@ -39,6 +39,7 @@
|
|||
* https://www.ti.com/product/bq27z561
|
||||
* https://www.ti.com/product/bq28z610
|
||||
* https://www.ti.com/product/bq34z100-g1
|
||||
* https://www.ti.com/product/bq78z100
|
||||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
|
@ -515,6 +516,27 @@ static u8
|
|||
[BQ27XXX_REG_DCAP] = 0x3c,
|
||||
[BQ27XXX_REG_AP] = 0x22,
|
||||
BQ27XXX_DM_REG_ROWS,
|
||||
},
|
||||
bq78z100_regs[BQ27XXX_REG_MAX] = {
|
||||
[BQ27XXX_REG_CTRL] = 0x00,
|
||||
[BQ27XXX_REG_TEMP] = 0x06,
|
||||
[BQ27XXX_REG_INT_TEMP] = 0x28,
|
||||
[BQ27XXX_REG_VOLT] = 0x08,
|
||||
[BQ27XXX_REG_AI] = 0x14,
|
||||
[BQ27XXX_REG_FLAGS] = 0x0a,
|
||||
[BQ27XXX_REG_TTE] = 0x16,
|
||||
[BQ27XXX_REG_TTF] = 0x18,
|
||||
[BQ27XXX_REG_TTES] = 0x1c,
|
||||
[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
|
||||
[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
|
||||
[BQ27XXX_REG_RC] = 0x10,
|
||||
[BQ27XXX_REG_FCC] = 0x12,
|
||||
[BQ27XXX_REG_CYCT] = 0x2a,
|
||||
[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
|
||||
[BQ27XXX_REG_SOC] = 0x2c,
|
||||
[BQ27XXX_REG_DCAP] = 0x3c,
|
||||
[BQ27XXX_REG_AP] = 0x22,
|
||||
BQ27XXX_DM_REG_ROWS,
|
||||
};
|
||||
|
||||
static enum power_supply_property bq27000_props[] = {
|
||||
|
@ -813,6 +835,26 @@ static enum power_supply_property bq34z100_props[] = {
|
|||
POWER_SUPPLY_PROP_MANUFACTURER,
|
||||
};
|
||||
|
||||
static enum power_supply_property bq78z100_props[] = {
|
||||
POWER_SUPPLY_PROP_STATUS,
|
||||
POWER_SUPPLY_PROP_PRESENT,
|
||||
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
||||
POWER_SUPPLY_PROP_CURRENT_NOW,
|
||||
POWER_SUPPLY_PROP_CAPACITY,
|
||||
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
|
||||
POWER_SUPPLY_PROP_TEMP,
|
||||
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
|
||||
POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
|
||||
POWER_SUPPLY_PROP_TECHNOLOGY,
|
||||
POWER_SUPPLY_PROP_CHARGE_FULL,
|
||||
POWER_SUPPLY_PROP_CHARGE_NOW,
|
||||
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
|
||||
POWER_SUPPLY_PROP_CYCLE_COUNT,
|
||||
POWER_SUPPLY_PROP_POWER_AVG,
|
||||
POWER_SUPPLY_PROP_HEALTH,
|
||||
POWER_SUPPLY_PROP_MANUFACTURER,
|
||||
};
|
||||
|
||||
struct bq27xxx_dm_reg {
|
||||
u8 subclass_id;
|
||||
u8 offset;
|
||||
|
@ -911,6 +953,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
|
|||
#define bq27z561_dm_regs 0
|
||||
#define bq28z610_dm_regs 0
|
||||
#define bq34z100_dm_regs 0
|
||||
#define bq78z100_dm_regs 0
|
||||
|
||||
#define BQ27XXX_O_ZERO BIT(0)
|
||||
#define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD overtemperature flags */
|
||||
|
@ -969,6 +1012,7 @@ static struct {
|
|||
[BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS),
|
||||
[BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
|
||||
BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
|
||||
[BQ78Z100] = BQ27XXX_DATA(bq78z100, 0 , BQ27Z561_O_BITS),
|
||||
};
|
||||
|
||||
static DEFINE_MUTEX(bq27xxx_list_lock);
|
||||
|
|
|
@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
|
|||
{ "bq27z561", BQ27Z561 },
|
||||
{ "bq28z610", BQ28Z610 },
|
||||
{ "bq34z100", BQ34Z100 },
|
||||
{ "bq78z100", BQ78Z100 },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
|
||||
|
@ -284,6 +285,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
|
|||
{ .compatible = "ti,bq27z561" },
|
||||
{ .compatible = "ti,bq28z610" },
|
||||
{ .compatible = "ti,bq34z100" },
|
||||
{ .compatible = "ti,bq78z100" },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
|
||||
|
|
|
@ -33,6 +33,7 @@ enum bq27xxx_chip {
|
|||
BQ27Z561,
|
||||
BQ28Z610,
|
||||
BQ34Z100,
|
||||
BQ78Z100,
|
||||
};
|
||||
|
||||
struct bq27xxx_device_info;
|
||||
|
|
Загрузка…
Ссылка в новой задаче