microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

extcon: arizona: Enable basic headphone identification 

Use the headphone detection to identify if the accessory is a headphone or
line load. There are two different revisions of the IP with different
register layouts, support both.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
This commit is contained in:
Mark Brown 2013-01-11 08:55:43 +09:00 коммит произвёл Chanwoo Choi
Родитель 92a49871b3
Коммит 4f34033382
3 изменённых файлов: 336 добавлений и 22 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

343
drivers/extcon/extcon-arizona.c
Просмотреть файл

@ -31,8 +31,14 @@
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
#define ARIZONA_DEFAULT_HP 32
#define ARIZONA_NUM_BUTTONS 6
#define ARIZONA_ACCDET_MODE_MIC 0
#define ARIZONA_ACCDET_MODE_HPL 1
#define ARIZONA_ACCDET_MODE_HPR 2
struct arizona_extcon_info {
struct device *dev;
struct arizona *arizona;
@ -47,10 +53,14 @@ struct arizona_extcon_info {
bool micd_reva;
bool micd_clamp;
bool hpdet_active;
bool mic;
bool detecting;
int jack_flips;
int hpdet_ip;
struct extcon_dev edev;
};
@ -74,11 +84,13 @@ static struct {
#define ARIZONA_CABLE_MECHANICAL 0
#define ARIZONA_CABLE_MICROPHONE 1
#define ARIZONA_CABLE_HEADPHONE 2
#define ARIZONA_CABLE_LINEOUT 3
static const char *arizona_cable[] = {
"Mechanical",
"Microphone",
"Headphone",
"Line-out",
NULL,
};
@ -100,6 +112,290 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode);
}
static struct {
unsigned int factor_a;
unsigned int factor_b;
} arizona_hpdet_b_ranges[] = {
{ 5528, 362464 },
{ 11084, 6186851 },
{ 11065, 65460395 },
};
static struct {
int min;
int max;
} arizona_hpdet_c_ranges[] = {
{ 0, 30 },
{ 8, 100 },
{ 100, 1000 },
{ 1000, 10000 },
};
static int arizona_hpdet_read(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
unsigned int val, range;
int ret;
ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read HPDET status: %d\n",
ret);
return ret;
}
switch (info->hpdet_ip) {
case 0:
if (!(val & ARIZONA_HP_DONE)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
val);
val = ARIZONA_DEFAULT_HP;
}
val &= ARIZONA_HP_LVL_MASK;
break;
case 1:
if (!(val & ARIZONA_HP_DONE_B)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
val);
return ARIZONA_DEFAULT_HP;
}
ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read HP value: %d\n",
ret);
return ARIZONA_DEFAULT_HP;
}
regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
&range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
(val < 100 || val > 0x3fb)) {
range++;
dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
range);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
/* If we go out of range report top of range */
if (val < 100 || val > 0x3fb) {
dev_dbg(arizona->dev, "Measurement out of range\n");
return 10000;
}
dev_dbg(arizona->dev, "HPDET read %d in range %d\n",
val, range);
val = arizona_hpdet_b_ranges[range].factor_b
/ ((val * 100) -
arizona_hpdet_b_ranges[range].factor_a);
break;
default:
dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
info->hpdet_ip);
case 2:
if (!(val & ARIZONA_HP_DONE_B)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
val);
return ARIZONA_DEFAULT_HP;
}
val &= ARIZONA_HP_LVL_B_MASK;
regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
&range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
/* Skip up or down a range? */
if (range && (val < arizona_hpdet_c_ranges[range].min)) {
range--;
dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
arizona_hpdet_c_ranges[range].min,
arizona_hpdet_c_ranges[range].max);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
(val >= arizona_hpdet_c_ranges[range].max)) {
range++;
dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
arizona_hpdet_c_ranges[range].min,
arizona_hpdet_c_ranges[range].max);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
}
dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
return val;
}
static irqreturn_t arizona_hpdet_irq(int irq, void *data)
{
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
int report = ARIZONA_CABLE_HEADPHONE;
int ret;
mutex_lock(&info->lock);
/* If we got a spurious IRQ for some reason then ignore it */
if (!info->hpdet_active) {
dev_warn(arizona->dev, "Spurious HPDET IRQ\n");
mutex_unlock(&info->lock);
return IRQ_NONE;
}
/* If the cable was removed while measuring ignore the result */
ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
goto out;
} else if (!ret) {
dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
goto done;
}
ret = arizona_hpdet_read(info);
if (ret == -EAGAIN) {
goto out;
} else if (ret < 0) {
goto done;
}
/* Reset back to starting range */
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK, 0);
/* Report high impedence cables as line outputs */
if (ret >= 5000)
report = ARIZONA_CABLE_LINEOUT;
else
report = ARIZONA_CABLE_HEADPHONE;
ret = extcon_set_cable_state_(&info->edev, report, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report HP/line: %d\n",
ret);
ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0);
if (ret != 0)
dev_warn(arizona->dev, "Failed to undo magic: %d\n", ret);
ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0);
if (ret != 0)
dev_warn(arizona->dev, "Failed to undo magic: %d\n", ret);
done:
regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, 0);
/* Revert back to MICDET mode */
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* If we have a mic then reenable MICDET */
if (info->mic)
arizona_start_mic(info);
if (info->hpdet_active) {
pm_runtime_put_autosuspend(info->dev);
info->hpdet_active = false;
}
out:
mutex_unlock(&info->lock);
return IRQ_HANDLED;
}
static void arizona_identify_headphone(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
int ret;
dev_dbg(arizona->dev, "Starting HPDET\n");
/* Make sure we keep the device enabled during the measurement */
pm_runtime_get(info->dev);
info->hpdet_active = true;
if (info->mic)
arizona_stop_mic(info);
ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000);
if (ret != 0)
dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0x4000);
if (ret != 0)
dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK,
ARIZONA_ACCDET_MODE_HPL);
if (ret != 0) {
dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
goto err;
}
ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
if (ret != 0) {
dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
ret);
goto err;
}
return;
err:
regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
ret = extcon_update_state(&info->edev,
1 << ARIZONA_CABLE_HEADPHONE,
1 << ARIZONA_CABLE_HEADPHONE);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
if (info->mic)
arizona_start_mic(info);
info->hpdet_active = false;
}
}
info->hpdet_active = false;
}
static void arizona_start_mic(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
@ -125,6 +421,10 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
regmap_write(arizona->regmap, 0x80, 0x0);
}
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
&change);
@ -189,11 +489,11 @@ static irqreturn_t arizona_micdet(int irq, void *data)
/* If we got a high impedence we should have a headset, report it. */
if (info->detecting && (val & 0x400)) {
arizona_identify_headphone(info);
ret = extcon_update_state(&info->edev,
1 << ARIZONA_CABLE_MICROPHONE |
1 << ARIZONA_CABLE_HEADPHONE,
1 << ARIZONA_CABLE_MICROPHONE |
1 << ARIZONA_CABLE_HEADPHONE);
1 << ARIZONA_CABLE_MICROPHONE,
1 << ARIZONA_CABLE_MICROPHONE);
if (ret != 0)
dev_err(arizona->dev, "Headset report failed: %d\n",
@ -214,17 +514,12 @@ static irqreturn_t arizona_micdet(int irq, void *data)
info->jack_flips++;
if (info->jack_flips >= info->micd_num_modes) {
dev_dbg(arizona->dev, "Detected headphone\n");
info->detecting = false;
arizona_stop_mic(info);
dev_dbg(arizona->dev, "Detected HP/line\n");
arizona_identify_headphone(info);
ret = extcon_set_cable_state_(&info->edev,
ARIZONA_CABLE_HEADPHONE,
true);
if (ret != 0)
dev_err(arizona->dev,
"Headphone report failed: %d\n",
ret);
info->detecting = false;
arizona_stop_mic(info);
} else {
info->micd_mode++;
if (info->micd_mode == info->micd_num_modes)
@ -260,13 +555,7 @@ static irqreturn_t arizona_micdet(int irq, void *data)
info->detecting = false;
arizona_stop_mic(info);
ret = extcon_set_cable_state_(&info->edev,
ARIZONA_CABLE_HEADPHONE,
true);
if (ret != 0)
dev_err(arizona->dev,
"Headphone report failed: %d\n",
ret);
arizona_identify_headphone(info);
} else {
dev_warn(arizona->dev, "Button with no mic: %x\n",
val);
@ -387,6 +676,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
break;
default:
info->micd_clamp = true;
info->hpdet_ip = 1;
break;
}
break;
@ -524,6 +814,13 @@ static int arizona_extcon_probe(struct platform_device *pdev)
goto err_fall_wake;
}
ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET,
"HPDET", arizona_hpdet_irq, info);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret);
goto err_micdet;
}
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_RATE_MASK,
8 << ARIZONA_MICD_RATE_SHIFT);
@ -544,11 +841,13 @@ static int arizona_extcon_probe(struct platform_device *pdev)
ret = input_register_device(info->input);
if (ret) {
dev_err(&pdev->dev, "Can't register input device: %d\n", ret);
goto err_micdet;
goto err_hpdet;
}
return 0;
err_hpdet:
arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
err_micdet:
arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
err_fall_wake:

3
drivers/mfd/wm5102-tables.c
Просмотреть файл

@ -1106,6 +1106,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_HP_DACVAL:
case ARIZONA_MICD_CLAMP_CONTROL:
case ARIZONA_MIC_DETECT_1:
case ARIZONA_MIC_DETECT_2:
case ARIZONA_MIC_DETECT_3:
@ -1875,6 +1877,7 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_HP_DACVAL:
case ARIZONA_MIC_DETECT_3:
return true;
default:

12
include/linux/mfd/arizona/registers.h
Просмотреть файл

@ -119,6 +119,7 @@
#define ARIZONA_ACCESSORY_DETECT_MODE_1 0x293
#define ARIZONA_HEADPHONE_DETECT_1 0x29B
#define ARIZONA_HEADPHONE_DETECT_2 0x29C
#define ARIZONA_HP_DACVAL 0x29F
#define ARIZONA_MICD_CLAMP_CONTROL 0x2A2
#define ARIZONA_MIC_DETECT_1 0x2A3
#define ARIZONA_MIC_DETECT_2 0x2A4
@ -2036,6 +2037,9 @@
/*
* R667 (0x29B) - Headphone Detect 1
*/
#define ARIZONA_HP_IMPEDANCE_RANGE_MASK 0x0600 /* HP_IMPEDANCE_RANGE - [10:9] */
#define ARIZONA_HP_IMPEDANCE_RANGE_SHIFT 9 /* HP_IMPEDANCE_RANGE - [10:9] */
#define ARIZONA_HP_IMPEDANCE_RANGE_WIDTH 2 /* HP_IMPEDANCE_RANGE - [10:9] */
#define ARIZONA_HP_STEP_SIZE 0x0100 /* HP_STEP_SIZE */
#define ARIZONA_HP_STEP_SIZE_MASK 0x0100 /* HP_STEP_SIZE */
#define ARIZONA_HP_STEP_SIZE_SHIFT 8 /* HP_STEP_SIZE */
@ -2070,6 +2074,14 @@
#define ARIZONA_HP_LVL_SHIFT 0 /* HP_LVL - [6:0] */
#define ARIZONA_HP_LVL_WIDTH 7 /* HP_LVL - [6:0] */
#define ARIZONA_HP_DONE_B 0x8000 /* HP_DONE */
#define ARIZONA_HP_DONE_B_MASK 0x8000 /* HP_DONE */
#define ARIZONA_HP_DONE_B_SHIFT 15 /* HP_DONE */
#define ARIZONA_HP_DONE_B_WIDTH 1 /* HP_DONE */
#define ARIZONA_HP_LVL_B_MASK 0x7FFF /* HP_LVL - [14:0] */
#define ARIZONA_HP_LVL_B_SHIFT 0 /* HP_LVL - [14:0] */
#define ARIZONA_HP_LVL_B_WIDTH 15 /* HP_LVL - [14:0] */
/*
* R674 (0x2A2) - MICD clamp control
*/