ARM: Kirkwood: add modes-map property to ns2-leds nodes

Since the LED modes mapping is no longer hardcoded inside the leds-ns2
driver, then it must be provided through the modes-map property in the
ns2-leds nodes.

Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

arch/arm/boot/dts/kirkwood-d2net.dts

@@ -10,6 +10,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-netxbig.dtsi"
 
 / {
@@ -28,6 +29,10 @@
 			label = "d2net_v2:blue:sata";
 			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 

arch/arm/boot/dts/kirkwood-is2.dts

@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };

arch/arm/boot/dts/kirkwood-ns2.dts

@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };

arch/arm/boot/dts/kirkwood-ns2max.dts

@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -46,6 +47,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };

arch/arm/boot/dts/kirkwood-ns2mini.dts

@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -47,6 +48,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };