hwmon: (pmbus/adm1275) Add support for ADM1272
The chip is quite similar to other chips in the series, but as usual it comes with its own quirks. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck
Родитель
05993e226a
Коммит
4ff0ce227a
|
|
@ -6,6 +6,10 @@ Supported chips:
|
|||
Prefix: 'adm1075'
|
||||
Addresses scanned: -
|
||||
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
|
||||
* Analog Devices ADM1272
|
||||
Prefix: 'adm1272'
|
||||
Addresses scanned: -
|
||||
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf
|
||||
* Analog Devices ADM1275
|
||||
Prefix: 'adm1275'
|
||||
Addresses scanned: -
|
||||
|
|
@ -29,11 +33,11 @@ Author: Guenter Roeck <linux@roeck-us.net>
|
|||
Description
|
||||
-----------
|
||||
|
||||
This driver supports hardware monitoring for Analog Devices ADM1075, ADM1275,
|
||||
ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and Digital
|
||||
Power Monitors.
|
||||
This driver supports hardware monitoring for Analog Devices ADM1075, ADM1272,
|
||||
ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and
|
||||
Digital Power Monitors.
|
||||
|
||||
ADM1075, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
|
||||
ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
|
||||
controllers that allow a circuit board to be removed from or inserted into
|
||||
a live backplane. They also feature current and voltage readback via an
|
||||
integrated 12 bit analog-to-digital converter (ADC), accessed using a
|
||||
|
|
@ -100,11 +104,10 @@ power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only.
|
|||
power1_input_highest Highest observed input power.
|
||||
power1_reset_history Write any value to reset history.
|
||||
|
||||
Power attributes are supported on ADM1075, ADM1276,
|
||||
ADM1293, and ADM1294.
|
||||
Power attributes are supported on ADM1075, ADM1272,
|
||||
ADM1276, ADM1293, and ADM1294.
|
||||
|
||||
temp1_input Chip temperature.
|
||||
Temperature attributes are only available on ADM1278.
|
||||
temp1_max Maximum chip temperature.
|
||||
temp1_max_alarm Temperature alarm.
|
||||
temp1_crit Critical chip temperature.
|
||||
|
|
@ -112,4 +115,5 @@ temp1_crit_alarm Critical temperature high alarm.
|
|||
temp1_highest Highest observed temperature.
|
||||
temp1_reset_history Write any value to reset history.
|
||||
|
||||
Temperature attributes are supported on ADM1278.
|
||||
Temperature attributes are supported on ADM1272 and
|
||||
ADM1278.
|
||||
|
|
|
|||
|
|
@ -31,8 +31,8 @@ config SENSORS_ADM1275
|
|||
default n
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for Analog
|
||||
Devices ADM1075, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294
|
||||
Hot-Swap Controller and Digital Power Monitors.
|
||||
Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
|
||||
and ADM1294 Hot-Swap Controller and Digital Power Monitors.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called adm1275.
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@
|
|||
* and Digital Power Monitor
|
||||
*
|
||||
* Copyright (c) 2011 Ericsson AB.
|
||||
* Copyright (c) 2018 Guenter Roeck
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -24,7 +25,7 @@
|
|||
#include <linux/bitops.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
enum chips { adm1075, adm1275, adm1276, adm1278, adm1293, adm1294 };
|
||||
enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
|
||||
|
||||
#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
|
||||
#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5)
|
||||
|
|
@ -41,6 +42,8 @@ enum chips { adm1075, adm1275, adm1276, adm1278, adm1293, adm1294 };
|
|||
#define ADM1075_IRANGE_25 BIT(3)
|
||||
#define ADM1075_IRANGE_MASK (BIT(3) | BIT(4))
|
||||
|
||||
#define ADM1272_IRANGE BIT(0)
|
||||
|
||||
#define ADM1278_TEMP1_EN BIT(3)
|
||||
#define ADM1278_VIN_EN BIT(2)
|
||||
#define ADM1278_VOUT_EN BIT(1)
|
||||
|
|
@ -105,6 +108,19 @@ static const struct coefficients adm1075_coefficients[] = {
|
|||
[4] = { 4279, 0, -1 }, /* power, irange50 */
|
||||
};
|
||||
|
||||
static const struct coefficients adm1272_coefficients[] = {
|
||||
[0] = { 6770, 0, -2 }, /* voltage, vrange 60V */
|
||||
[1] = { 4062, 0, -2 }, /* voltage, vrange 100V */
|
||||
[2] = { 1326, 20480, -1 }, /* current, vsense range 15mV */
|
||||
[3] = { 663, 20480, -1 }, /* current, vsense range 30mV */
|
||||
[4] = { 3512, 0, -2 }, /* power, vrange 60V, irange 15mV */
|
||||
[5] = { 21071, 0, -3 }, /* power, vrange 100V, irange 15mV */
|
||||
[6] = { 17561, 0, -3 }, /* power, vrange 60V, irange 30mV */
|
||||
[7] = { 10535, 0, -3 }, /* power, vrange 100V, irange 30mV */
|
||||
[8] = { 42, 31871, -1 }, /* temperature */
|
||||
|
||||
};
|
||||
|
||||
static const struct coefficients adm1275_coefficients[] = {
|
||||
[0] = { 19199, 0, -2 }, /* voltage, vrange set */
|
||||
[1] = { 6720, 0, -1 }, /* voltage, vrange not set */
|
||||
|
|
@ -335,6 +351,7 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
|
|||
|
||||
static const struct i2c_device_id adm1275_id[] = {
|
||||
{ "adm1075", adm1075 },
|
||||
{ "adm1272", adm1272 },
|
||||
{ "adm1275", adm1275 },
|
||||
{ "adm1276", adm1276 },
|
||||
{ "adm1278", adm1278 },
|
||||
|
|
@ -451,6 +468,54 @@ static int adm1275_probe(struct i2c_client *client,
|
|||
info->func[0] |=
|
||||
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
|
||||
break;
|
||||
case adm1272:
|
||||
data->have_vout = true;
|
||||
data->have_pin_max = true;
|
||||
data->have_temp_max = true;
|
||||
|
||||
coefficients = adm1272_coefficients;
|
||||
vindex = (config & ADM1275_VRANGE) ? 1 : 0;
|
||||
cindex = (config & ADM1272_IRANGE) ? 3 : 2;
|
||||
/* pindex depends on the combination of the above */
|
||||
switch (config & (ADM1275_VRANGE | ADM1272_IRANGE)) {
|
||||
case 0:
|
||||
default:
|
||||
pindex = 4;
|
||||
break;
|
||||
case ADM1275_VRANGE:
|
||||
pindex = 5;
|
||||
break;
|
||||
case ADM1272_IRANGE:
|
||||
pindex = 6;
|
||||
break;
|
||||
case ADM1275_VRANGE | ADM1272_IRANGE:
|
||||
pindex = 7;
|
||||
break;
|
||||
}
|
||||
tindex = 8;
|
||||
|
||||
info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
|
||||
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
|
||||
|
||||
/* Enable VOUT if not enabled (it is disabled by default) */
|
||||
if (!(config & ADM1278_VOUT_EN)) {
|
||||
config |= ADM1278_VOUT_EN;
|
||||
ret = i2c_smbus_write_byte_data(client,
|
||||
ADM1275_PMON_CONFIG,
|
||||
config);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev,
|
||||
"Failed to enable VOUT monitoring\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
}
|
||||
|
||||
if (config & ADM1278_TEMP1_EN)
|
||||
info->func[0] |=
|
||||
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
|
||||
if (config & ADM1278_VIN_EN)
|
||||
info->func[0] |= PMBUS_HAVE_VIN;
|
||||
break;
|
||||
case adm1275:
|
||||
if (device_config & ADM1275_IOUT_WARN2_SELECT)
|
||||
data->have_oc_fault = true;
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче