Merge commit 'gcl/gcl-next'

arch/powerpc/platforms/52xx/mpc52xx_common.c

@@ -90,7 +90,7 @@ mpc5200_setup_xlb_arbiter(void)
 	of_node_put(np);
 	if (!xlb) {
 		printk(KERN_ERR __FILE__ ": "
-			"Error mapping XLB in mpc52xx_setup_cpu().  "
+			"Error mapping XLB in mpc52xx_setup_cpu(). "
 			"Expect some abnormal behavior\n");
 		return;
 	}
@@ -216,7 +216,8 @@ mpc52xx_restart(char *cmd)
 		out_be32(&mpc52xx_wdt->count, 0x000000ff);
 		out_be32(&mpc52xx_wdt->mode, 0x00009004);
 	} else
-		printk("mpc52xx_restart: Can't access wdt. "
+		printk(KERN_ERR __FILE__ ": "
+			"mpc52xx_restart: Can't access wdt. "
 			"Restart impossible, system halted.\n");
 
 	while (1);

arch/powerpc/platforms/52xx/mpc52xx_pci.c

@@ -265,8 +265,11 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 	/* Memory windows */
 	res = &hose->mem_resources[0];
 	if (res->flags) {
-		pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n",
-		         res->start, res->end, res->flags);
+		pr_debug("mem_resource[0] = "
+		         "{.start=%llx, .end=%llx, .flags=%llx}\n",
+		         (unsigned long long)res->start,
+			 (unsigned long long)res->end,
+			 (unsigned long long)res->flags);
 		out_be32(&pci_regs->iw0btar,
 		         MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
 		                  res->end - res->start + 1));
@@ -297,9 +300,11 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 		printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__);
 		return;
 	}
-	pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} "
+	pr_debug(".io_resource={.start=%llx,.end=%llx,.flags=%llx} "
 	         ".io_base_phys=0x%p\n",
-	         res->start, res->end, res->flags, (void*)hose->io_base_phys);
+	         (unsigned long long)res->start,
+		 (unsigned long long)res->end,
+		 (unsigned long long)res->flags, (void*)hose->io_base_phys);
 	out_be32(&pci_regs->iw2btar,
 	         MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys,
 	                                        res->start,

drivers/i2c/busses/i2c-mpc.c

@@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = {
 	.name = "MPC adapter",
 	.id = I2C_HW_MPC107,
 	.algo = &mpc_algo,
-	.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.timeout = 1,
 };
 

drivers/of/base.c

@@ -410,7 +410,7 @@ struct of_modalias_table {
 	char *modalias;
 };
 static struct of_modalias_table of_modalias_table[] = {
-	/* Empty for now; add entries as needed */
+	{ "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
 };
 
 /**

drivers/spi/mpc52xx_psc_spi.c

@@ -108,13 +108,13 @@ static void mpc52xx_psc_spi_activate_cs(struct spi_device *spi)
 	 * Because psc->ccr is defined as 16bit register instead of 32bit
 	 * just set the lower byte of BitClkDiv
 	 */
-	ccr = in_be16(&psc->ccr);
+	ccr = in_be16((u16 __iomem *)&psc->ccr);
 	ccr &= 0xFF00;
 	if (cs->speed_hz)
 		ccr |= (MCLK / cs->speed_hz - 1) & 0xFF;
 	else /* by default SPI Clk 1MHz */
 		ccr |= (MCLK / 1000000 - 1) & 0xFF;
-	out_be16(&psc->ccr, ccr);
+	out_be16((u16 __iomem *)&psc->ccr, ccr);
 	mps->bits_per_word = cs->bits_per_word;
 
 	if (mps->activate_cs)
@@ -347,7 +347,7 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
 	/* Configure 8bit codec mode as a SPI master and use EOF flags */
 	/* SICR_SIM_CODEC8|SICR_GENCLK|SICR_SPI|SICR_MSTR|SICR_USEEOF */
 	out_be32(&psc->sicr, 0x0180C800);
-	out_be16(&psc->ccr, 0x070F); /* by default SPI Clk 1MHz */
+	out_be16((u16 __iomem *)&psc->ccr, 0x070F); /* default SPI Clk 1MHz */
 
 	/* Set 2ms DTL delay */
 	out_8(&psc->ctur, 0x00);