From 50302fc7b936c1b00e39d4a4f118fb43d3f5ef2c Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 5 Aug 2019 19:55:20 -0500 Subject: [PATCH] soundwire: intel_init: add kernel module parameter to filter out links The hardware and ACPI info may report the presence of links that are not physically enabled (e.g. due to pin-muxing or hardware reworks), which in turn can result in errors being thrown. This shouldn't be the case for production devices but will happen a lot on development devices - even more so when they expose a connector. Even when the ACPI information is correct, it's useful to be able to only enable the links that need attention - mostly to filter out dynamic debug messages. Add a module parameter to filter out such links, e.g. adding the following config to a file in /etc/modprobe.d will select the second and third links only. options soundwire_intel_init sdw_link_mask=0x6 Signed-off-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20190806005522.22642-16-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul --- drivers/soundwire/intel_init.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c index 70637a0383d2..b74c2f144962 100644 --- a/drivers/soundwire/intel_init.c +++ b/drivers/soundwire/intel_init.c @@ -22,6 +22,10 @@ #define SDW_LINK_BASE 0x30000 #define SDW_LINK_SIZE 0x10000 +static int link_mask; +module_param_named(sdw_link_mask, link_mask, int, 0444); +MODULE_PARM_DESC(sdw_link_mask, "Intel link mask (one bit per link)"); + struct sdw_link_data { struct sdw_intel_link_res res; struct platform_device *pdev; @@ -111,6 +115,13 @@ static struct sdw_intel_ctx /* Create SDW Master devices */ for (i = 0; i < count; i++) { + if (link_mask && !(link_mask & BIT(i))) { + dev_dbg(&adev->dev, + "Link %d masked, will not be enabled\n", i); + link++; + continue; + } + link->res.irq = res->irq; link->res.registers = res->mmio_base + SDW_LINK_BASE + (SDW_LINK_SIZE * i);