From 5049307d37a760e304ad191c5dc7c6851266d2f8 Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Wed, 1 Sep 2021 12:35:49 -0400 Subject: [PATCH] HID: usbhid: Fix flood of "control queue full" messages [patch description by Alan Stern] Commit 7652dd2c5cb7 ("USB: core: Check buffer length matches wLength for control transfers") causes control URB submissions to fail if the transfer_buffer_length value disagrees with the setup packet's wLength valuel. Unfortunately, it turns out that the usbhid can trigger this failure mode when it submits a control request for an input report: It pads the transfer buffer size to a multiple of the maxpacket value but does not increase wLength correspondingly. These failures have caused problems for people using an APS UPC, in the form of a flood of log messages resembling: hid-generic 0003:051D:0002.0002: control queue full This patch fixes the problem by setting the wLength value equal to the padded transfer_buffer_length value in hid_submit_ctrl(). As a nice bonus, the code which stores the transfer_buffer_length value is now shared between the two branches of an "if" statement, so it can be de-duplicated. Signed-off-by: Michal Kubecek Signed-off-by: Alan Stern Fixes: 7652dd2c5cb7 ("USB: core: Check buffer length matches wLength for control transfers") Tested-by: Oleksandr Natalenko Tested-by: Benjamin Tissoires Acked-by: Benjamin Tissoires Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 0bf123bf2ef8..6b8690878435 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -377,27 +377,26 @@ static int hid_submit_ctrl(struct hid_device *hid) len = hid_report_len(report); if (dir == USB_DIR_OUT) { usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0); - usbhid->urbctrl->transfer_buffer_length = len; if (raw_report) { memcpy(usbhid->ctrlbuf, raw_report, len); kfree(raw_report); usbhid->ctrl[usbhid->ctrltail].raw_report = NULL; } } else { - int maxpacket, padlen; + int maxpacket; usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0); maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0); if (maxpacket > 0) { - padlen = DIV_ROUND_UP(len, maxpacket); - padlen *= maxpacket; - if (padlen > usbhid->bufsize) - padlen = usbhid->bufsize; + len = DIV_ROUND_UP(len, maxpacket); + len *= maxpacket; + if (len > usbhid->bufsize) + len = usbhid->bufsize; } else - padlen = 0; - usbhid->urbctrl->transfer_buffer_length = padlen; + len = 0; } + usbhid->urbctrl->transfer_buffer_length = len; usbhid->urbctrl->dev = hid_to_usb_dev(hid); usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;