rapidio/tsi721_dma: rework scatter-gather list handling

Rework Tsi721 RapidIO DMA engine support to allow handling data
scatter/gather lists longer than number of hardware buffer descriptors in
the DMA channel's descriptor list.

The current implementation of Tsi721 DMA transfers requires that number of
entries in a scatter/gather list provided by a caller of
dmaengine_prep_rio_sg() should not exceed number of allocated hardware
buffer descriptors.

This patch removes the limitation by processing long scatter/gather lists
by sections that can be transferred using hardware descriptor ring of
configured size.  It also introduces a module parameter
"dma_desc_per_channel" to allow run-time configuration of Tsi721 hardware
buffer descriptor rings.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Alexandre Bounine 2014-08-08 14:22:12 -07:00 коммит произвёл Linus Torvalds
Родитель 4aff1ce7ad
Коммит 50835e977b
3 изменённых файлов: 396 добавлений и 357 удалений

Просмотреть файл

@ -20,13 +20,26 @@ II. Known problems
None.
III. To do
III. DMA Engine Support
Add DMA data transfers (non-messaging).
Add inbound region (SRIO-to-PCIe) mapping.
Tsi721 mport driver supports DMA data transfers between local system memory and
remote RapidIO devices. This functionality is implemented according to SLAVE
mode API defined by common Linux kernel DMA Engine framework.
Depending on system requirements RapidIO DMA operations can be included/excluded
by setting CONFIG_RAPIDIO_DMA_ENGINE option. Tsi721 miniport driver uses seven
out of eight available BDMA channels to support DMA data transfers.
One BDMA channel is reserved for generation of maintenance read/write requests.
If Tsi721 mport driver have been built with RAPIDIO_DMA_ENGINE support included,
this driver will accept DMA-specific module parameter:
"dma_desc_per_channel" - defines number of hardware buffer descriptors used by
each BDMA channel of Tsi721 (by default - 128).
IV. Version History
1.1.0 - DMA operations re-worked to support data scatter/gather lists larger
than hardware buffer descriptors ring.
1.0.0 - Initial driver release.
V. License

Просмотреть файл

@ -644,27 +644,26 @@ enum tsi721_smsg_int_flag {
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
#define TSI721_BDMA_BD_RING_SZ 128
#define TSI721_BDMA_MAX_BCOUNT (TSI721_DMAD_BCOUNT1 + 1)
struct tsi721_tx_desc {
struct dma_async_tx_descriptor txd;
struct tsi721_dma_desc *hw_desc;
u16 destid;
/* low 64-bits of 66-bit RIO address */
u64 rio_addr;
/* upper 2-bits of 66-bit RIO address */
u8 rio_addr_u;
u32 bcount;
bool interrupt;
enum dma_rtype rtype;
struct list_head desc_node;
struct list_head tx_list;
struct scatterlist *sg;
unsigned int sg_len;
enum dma_status status;
};
struct tsi721_bdma_chan {
int id;
void __iomem *regs;
int bd_num; /* number of buffer descriptors */
int bd_num; /* number of HW buffer descriptors */
void *bd_base; /* start of DMA descriptors */
dma_addr_t bd_phys;
void *sts_base; /* start of DMA BD status FIFO */
@ -680,7 +679,6 @@ struct tsi721_bdma_chan {
struct list_head active_list;
struct list_head queue;
struct list_head free_list;
dma_cookie_t completed_cookie;
struct tasklet_struct tasklet;
bool active;
};

Разница между файлами не показана из-за своего большого размера Загрузить разницу