clk: ti: dm816: add clkctrl clock data

Add data for dm816 clkctrl clocks, and register it within the clkctrl
driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

drivers/clk/ti/clk-816x.c

@@ -13,9 +13,54 @@
 #include <linux/list.h>
 #include <linux/clk-provider.h>
 #include <linux/clk/ti.h>
+#include <dt-bindings/clock/dm816.h>
 
 #include "clock.h"
 
+static const struct omap_clkctrl_reg_data dm816_default_clkctrl_regs[] __initconst = {
+	{ DM816_USB_OTG_HS_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk6_ck" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data dm816_alwon_clkctrl_regs[] __initconst = {
+	{ DM816_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk10_ck" },
+	{ DM816_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk10_ck" },
+	{ DM816_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk10_ck" },
+	{ DM816_GPIO1_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk6_ck" },
+	{ DM816_GPIO2_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk6_ck" },
+	{ DM816_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk10_ck" },
+	{ DM816_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk10_ck" },
+	{ DM816_TIMER1_CLKCTRL, NULL, CLKF_SW_SUP, "timer1_fck" },
+	{ DM816_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "timer2_fck" },
+	{ DM816_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "timer3_fck" },
+	{ DM816_TIMER4_CLKCTRL, NULL, CLKF_SW_SUP, "timer4_fck" },
+	{ DM816_TIMER5_CLKCTRL, NULL, CLKF_SW_SUP, "timer5_fck" },
+	{ DM816_TIMER6_CLKCTRL, NULL, CLKF_SW_SUP, "timer6_fck" },
+	{ DM816_TIMER7_CLKCTRL, NULL, CLKF_SW_SUP, "timer7_fck" },
+	{ DM816_WD_TIMER_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "sysclk18_ck" },
+	{ DM816_MCSPI1_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk10_ck" },
+	{ DM816_MAILBOX_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk6_ck" },
+	{ DM816_SPINBOX_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk6_ck" },
+	{ DM816_MMC1_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk10_ck" },
+	{ DM816_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk6_ck" },
+	{ DM816_DAVINCI_MDIO_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "sysclk24_ck" },
+	{ DM816_EMAC1_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "sysclk24_ck" },
+	{ DM816_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk2_ck" },
+	{ DM816_RTC_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "sysclk18_ck" },
+	{ DM816_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk4_ck" },
+	{ DM816_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk4_ck" },
+	{ DM816_TPTC1_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk4_ck" },
+	{ DM816_TPTC2_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk4_ck" },
+	{ DM816_TPTC3_CLKCTRL, NULL, CLKF_SW_SUP, "sysclk4_ck" },
+	{ 0 },
+};
+
+const struct omap_clkctrl_data dm816_clkctrl_data[] __initconst = {
+	{ 0x48180500, dm816_default_clkctrl_regs },
+	{ 0x48181400, dm816_alwon_clkctrl_regs },
+	{ 0 },
+};
+
 static struct ti_dt_clk dm816x_clks[] = {
 	DT_CLK(NULL, "sys_clkin", "sys_clkin_ck"),
 	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),

drivers/clk/ti/clkctrl.c

@@ -469,6 +469,9 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 #ifdef CONFIG_SOC_TI81XX
 	if (of_machine_is_compatible("ti,dm814"))
 		data = dm814_clkctrl_data;
+
+	if (of_machine_is_compatible("ti,dm816"))
+		data = dm816_clkctrl_data;
 #endif
 
 	while (data->addr) {

drivers/clk/ti/clock.h

@@ -237,6 +237,7 @@ extern const struct omap_clkctrl_data am3_clkctrl_data[];
 extern const struct omap_clkctrl_data am4_clkctrl_data[];
 extern const struct omap_clkctrl_data am438x_clkctrl_data[];
 extern const struct omap_clkctrl_data dm814_clkctrl_data[];
+extern const struct omap_clkctrl_data dm816_clkctrl_data[];
 
 #define CLKF_SW_SUP	BIT(0)
 #define CLKF_HW_SUP	BIT(1)