xHCI: fix cycle bit set in giveback_first_trb()
giveback_first_trb() controls the cycle bit set of the start_trb, to ensure that the start_trb is written last and the host controller will receive a whole td at a time. However, if the ring is wrapped and cycle bit is toggled to zero, then giveback_first_trb() will be of no effect. In this case, set the cycle bit of start_trb to 1 at the beginning and clear it in giveback_first_trb(). Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
This commit is contained in:
Родитель
e1eab2e000
Коммит
50f7b52a83
|
@ -2421,7 +2421,10 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
|
|||
* isn't reordered.
|
||||
*/
|
||||
wmb();
|
||||
start_trb->field[3] |= start_cycle;
|
||||
if (start_cycle)
|
||||
start_trb->field[3] |= start_cycle;
|
||||
else
|
||||
start_trb->field[3] &= ~0x1;
|
||||
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
|
||||
}
|
||||
|
||||
|
@ -2551,9 +2554,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
|
|||
u32 remainder = 0;
|
||||
|
||||
/* Don't change the cycle bit of the first TRB until later */
|
||||
if (first_trb)
|
||||
if (first_trb) {
|
||||
first_trb = false;
|
||||
else
|
||||
if (start_cycle == 0)
|
||||
field |= 0x1;
|
||||
} else
|
||||
field |= ep_ring->cycle_state;
|
||||
|
||||
/* Chain all the TRBs together; clear the chain bit in the last
|
||||
|
@ -2711,9 +2716,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
|
|||
field = 0;
|
||||
|
||||
/* Don't change the cycle bit of the first TRB until later */
|
||||
if (first_trb)
|
||||
if (first_trb) {
|
||||
first_trb = false;
|
||||
else
|
||||
if (start_cycle == 0)
|
||||
field |= 0x1;
|
||||
} else
|
||||
field |= ep_ring->cycle_state;
|
||||
|
||||
/* Chain all the TRBs together; clear the chain bit in the last
|
||||
|
@ -2818,13 +2825,17 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
|
|||
/* Queue setup TRB - see section 6.4.1.2.1 */
|
||||
/* FIXME better way to translate setup_packet into two u32 fields? */
|
||||
setup = (struct usb_ctrlrequest *) urb->setup_packet;
|
||||
field = 0;
|
||||
field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
|
||||
if (start_cycle == 0)
|
||||
field |= 0x1;
|
||||
queue_trb(xhci, ep_ring, false, true,
|
||||
/* FIXME endianness is probably going to bite my ass here. */
|
||||
setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
|
||||
setup->wIndex | setup->wLength << 16,
|
||||
TRB_LEN(8) | TRB_INTR_TARGET(0),
|
||||
/* Immediate data in pointer */
|
||||
TRB_IDT | TRB_TYPE(TRB_SETUP));
|
||||
field);
|
||||
|
||||
/* If there's data, queue data TRBs */
|
||||
field = 0;
|
||||
|
@ -2951,7 +2962,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
|
|||
field |= TRB_TYPE(TRB_ISOC);
|
||||
/* Assume URB_ISO_ASAP is set */
|
||||
field |= TRB_SIA;
|
||||
if (i > 0)
|
||||
if (i == 0) {
|
||||
if (start_cycle == 0)
|
||||
field |= 0x1;
|
||||
} else
|
||||
field |= ep_ring->cycle_state;
|
||||
first_trb = false;
|
||||
} else {
|
||||
|
|
Загрузка…
Ссылка в новой задаче