net: phy: Cosmetic fixes to phylink/sfp/sfp-bus.c

Perform a number of stylistic changes to phylink.c, sfp.c and sfp-bus.c:

- align with netdev-style comments
- align function arguments to the opening parenthesis
- remove blank lines
- fixup a few lines over 80 columns

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Florian Fainelli 2017-10-30 21:42:57 -07:00 коммит произвёл David S. Miller
Родитель 2e39748a42
Коммит 516b29edc3
3 изменённых файлов: 22 добавлений и 29 удалений

Просмотреть файл

@ -357,7 +357,7 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_stat
* 1 1 0 1 TX
*/
static void phylink_resolve_flow(struct phylink *pl,
struct phylink_link_state *state)
struct phylink_link_state *state)
{
int new_pause = 0;
@ -506,7 +506,8 @@ static int phylink_register_sfp(struct phylink *pl, struct device_node *np)
}
struct phylink *phylink_create(struct net_device *ndev, struct device_node *np,
phy_interface_t iface, const struct phylink_mac_ops *ops)
phy_interface_t iface,
const struct phylink_mac_ops *ops)
{
struct phylink *pl;
int ret;
@ -585,7 +586,7 @@ void phylink_phy_change(struct phy_device *phydev, bool up, bool do_carrier)
phylink_run_resolve(pl);
netdev_dbg(pl->netdev, "phy link %s %s/%s/%s\n", up ? "up" : "down",
phy_modes(phydev->interface),
phy_modes(phydev->interface),
phy_speed_to_str(phydev->speed),
phy_duplex_to_str(phydev->duplex));
}
@ -823,7 +824,7 @@ static void phylink_get_ksettings(const struct phylink_link_state *state,
}
int phylink_ethtool_ksettings_get(struct phylink *pl,
struct ethtool_link_ksettings *kset)
struct ethtool_link_ksettings *kset)
{
struct phylink_link_state link_state;
@ -870,7 +871,7 @@ int phylink_ethtool_ksettings_get(struct phylink *pl,
EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get);
int phylink_ethtool_ksettings_set(struct phylink *pl,
const struct ethtool_link_ksettings *kset)
const struct ethtool_link_ksettings *kset)
{
struct ethtool_link_ksettings our_kset;
struct phylink_link_state config;
@ -1337,8 +1338,6 @@ int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
}
EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
static int phylink_sfp_module_insert(void *upstream,
const struct sfp_eeprom_id *id)
{

Просмотреть файл

@ -26,7 +26,6 @@ struct sfp_bus {
bool started;
};
int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
unsigned long *support)
{
@ -208,7 +207,6 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
}
EXPORT_SYMBOL_GPL(sfp_parse_support);
static LIST_HEAD(sfp_buses);
static DEFINE_MUTEX(sfp_mutex);
@ -295,7 +293,6 @@ static void sfp_unregister_bus(struct sfp_bus *bus)
bus->registered = false;
}
int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo)
{
if (!bus->registered)
@ -305,7 +302,7 @@ int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo)
EXPORT_SYMBOL_GPL(sfp_get_module_info);
int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee,
u8 *data)
u8 *data)
{
if (!bus->registered)
return -ENOIOCTLCMD;
@ -330,8 +327,8 @@ void sfp_upstream_stop(struct sfp_bus *bus)
EXPORT_SYMBOL_GPL(sfp_upstream_stop);
struct sfp_bus *sfp_register_upstream(struct device_node *np,
struct net_device *ndev, void *upstream,
const struct sfp_upstream_ops *ops)
struct net_device *ndev, void *upstream,
const struct sfp_upstream_ops *ops)
{
struct sfp_bus *bus = sfp_bus_get(np);
int ret = 0;
@ -368,7 +365,6 @@ void sfp_unregister_upstream(struct sfp_bus *bus)
}
EXPORT_SYMBOL_GPL(sfp_unregister_upstream);
/* Socket driver entry points */
int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev)
{
@ -395,7 +391,6 @@ void sfp_remove_phy(struct sfp_bus *bus)
}
EXPORT_SYMBOL_GPL(sfp_remove_phy);
void sfp_link_up(struct sfp_bus *bus)
{
const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);

Просмотреть файл

@ -88,15 +88,12 @@ static const enum gpiod_flags gpio_flags[] = {
#define T_PROBE_INIT msecs_to_jiffies(300)
#define T_PROBE_RETRY msecs_to_jiffies(100)
/*
* SFP modules appear to always have their PHY configured for bus address
/* SFP modules appear to always have their PHY configured for bus address
* 0x56 (which with mdio-i2c, translates to a PHY address of 22).
*/
#define SFP_PHY_ADDR 22
/*
* Give this long for the PHY to reset.
*/
/* Give this long for the PHY to reset. */
#define T_PHY_RESET_MS 50
static DEFINE_MUTEX(sfp_mutex);
@ -150,10 +147,10 @@ static void sfp_gpio_set_state(struct sfp *sfp, unsigned int state)
/* If the module is present, drive the signals */
if (sfp->gpio[GPIO_TX_DISABLE])
gpiod_direction_output(sfp->gpio[GPIO_TX_DISABLE],
state & SFP_F_TX_DISABLE);
state & SFP_F_TX_DISABLE);
if (state & SFP_F_RATE_SELECT)
gpiod_direction_output(sfp->gpio[GPIO_RATE_SELECT],
state & SFP_F_RATE_SELECT);
state & SFP_F_RATE_SELECT);
} else {
/* Otherwise, let them float to the pull-ups */
if (sfp->gpio[GPIO_TX_DISABLE])
@ -164,7 +161,7 @@ static void sfp_gpio_set_state(struct sfp *sfp, unsigned int state)
}
static int sfp__i2c_read(struct i2c_adapter *i2c, u8 bus_addr, u8 dev_addr,
void *buf, size_t len)
void *buf, size_t len)
{
struct i2c_msg msgs[2];
int ret;
@ -186,7 +183,7 @@ static int sfp__i2c_read(struct i2c_adapter *i2c, u8 bus_addr, u8 dev_addr,
}
static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 addr, void *buf,
size_t len)
size_t len)
{
return sfp__i2c_read(sfp->i2c, a2 ? 0x51 : 0x50, addr, buf, len);
}
@ -220,7 +217,6 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
return 0;
}
/* Interface */
static unsigned int sfp_get_state(struct sfp *sfp)
{
@ -295,7 +291,8 @@ static void sfp_sm_next(struct sfp *sfp, unsigned int state,
sfp_sm_set_timer(sfp, timeout);
}
static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state, unsigned int timeout)
static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state,
unsigned int timeout)
{
sfp->sm_mod_state = state;
sfp_sm_set_timer(sfp, timeout);
@ -370,7 +367,8 @@ static void sfp_sm_link_check_los(struct sfp *sfp)
static void sfp_sm_fault(struct sfp *sfp, bool warn)
{
if (sfp->sm_retries && !--sfp->sm_retries) {
dev_err(sfp->dev, "module persistently indicates fault, disabling\n");
dev_err(sfp->dev,
"module persistently indicates fault, disabling\n");
sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
} else {
if (warn)
@ -461,7 +459,8 @@ static int sfp_sm_mod_probe(struct sfp *sfp)
memcpy(date, sfp->id.ext.datecode, 8);
date[8] = '\0';
dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date);
dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n",
vendor, part, rev, sn, date);
/* We only support SFP modules, not the legacy GBIC modules. */
if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP ||
@ -651,7 +650,7 @@ static int sfp_module_info(struct sfp *sfp, struct ethtool_modinfo *modinfo)
}
static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee,
u8 *data)
u8 *data)
{
unsigned int first, last, len;
int ret;