From 52772a7fd3d354ec1b88d85c83e98cbdcfb02787 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 26 Feb 2015 16:50:24 +0100 Subject: [PATCH] USB: pl2303: disable break on shutdown Currently an enabled break state is not disabled on final close nor on re-open and has to be disabled manually. Fix this by disabling break on port shutdown. Reported-by: Jari Ruusu Tested-by: Jari Ruusu Signed-off-by: Johan Hovold --- drivers/usb/serial/pl2303.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 0f872e6b2c87..829604d11f3f 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -132,6 +132,7 @@ MODULE_DEVICE_TABLE(usb, id_table); #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 +static void pl2303_set_break(struct usb_serial_port *port, bool enable); enum pl2303_type { TYPE_01, /* Type 0 and 1 (difference unknown) */ @@ -615,6 +616,7 @@ static void pl2303_close(struct usb_serial_port *port) { usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); + pl2303_set_break(port, false); } static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -741,17 +743,16 @@ static int pl2303_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } -static void pl2303_break_ctl(struct tty_struct *tty, int break_state) +static void pl2303_set_break(struct usb_serial_port *port, bool enable) { - struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; u16 state; int result; - if (break_state == 0) - state = BREAK_OFF; - else + if (enable) state = BREAK_ON; + else + state = BREAK_OFF; dev_dbg(&port->dev, "%s - turning break %s\n", __func__, state == BREAK_OFF ? "off" : "on"); @@ -763,6 +764,13 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) dev_err(&port->dev, "error sending break = %d\n", result); } +static void pl2303_break_ctl(struct tty_struct *tty, int state) +{ + struct usb_serial_port *port = tty->driver_data; + + pl2303_set_break(port, state); +} + static void pl2303_update_line_status(struct usb_serial_port *port, unsigned char *data, unsigned int actual_length)