regulator: Updates for v4.4

This is quite a quiet release in terms of volume of patches but it
 includes a couple of really nice core changes - the work Sascha has done
 in particular is something I've wanted to get done for a long time but
 just never got round to myself.  Highlights include:
 
  - Support from Sascha Hauer for setting the voltage of parent supplies
    based on requests from their children.  This is used both to allow
    set_voltage() to work through a dumb switch and to improve the
    efficiency of systems where DCDCs are used to supply LDOs by minimising
    the voltage drop over the LDOs.
  - Removal of regulator_list by Tomeu Vizoso, meaning we're not
    duplicating the device list maintained by the driver core.
  - Support for Wolfson/Cirrus WM8998 and WM1818.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWOez1AAoJECTWi3JdVIfQZSoH/jk2EQCG7hSIY6qVviHh+zQI
 TWULXDnldyfT4eCYNAhwe/oQjFs7ngPXz9UpMAQwtWfWNoLBifF+Y5+X413nHY82
 pKoRd+DQ1sIzGZb2YB0kS22Zg49Jilgv3y2Cw0aZuL7aqq7CEUGN3itEeWxqW9j8
 a1ORD4d2zgki4gK9fUBTiur/dIhMn+8Gi4CmBvujsSCQR4Z5UNOjiodTU0NONiBX
 znejoAoLJXzAyAoWN+p6sEvi9Gpx4QTV6tBOo56WPlzBgTX2qOFhhmJiQQ1rIJOv
 MucgNn+cocarWfMyQwvqa0CL4ufjJm2DcYoIhfc2jZip/mAeqcbxpj5bxWzaLec=
 =CX2S
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This is quite a quiet release in terms of volume of patches but it
  includes a couple of really nice core changes - the work Sascha has
  done in particular is something I've wanted to get done for a long
  time but just never got round to myself.

  Highlights include:

   - Support from Sascha Hauer for setting the voltage of parent
     supplies based on requests from their children.  This is used both
     to allow set_voltage() to work through a dumb switch and to improve
     the efficiency of systems where DCDCs are used to supply LDOs by
     minimising the voltage drop over the LDOs.

   - Removal of regulator_list by Tomeu Vizoso, meaning we're not
     duplicating the device list maintained by the driver core.

   - Support for Wolfson/Cirrus WM8998 and WM1818"

* tag 'regulator-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (29 commits)
  regulator: Use regulator_lock_supply() for get_voltage() too
  regulator: arizona: Add regulator specific device tree binding document
  regulator: stw481x: compile on COMPILE_TEST
  regulator: qcom-smd: Correct set_load() unit
  regulator: core: Propagate voltage changes to supply regulators
  regulator: core: Factor out regulator_map_voltage
  regulator: i.MX anatop: Allow supply regulator
  regulator: introduce min_dropout_uV
  regulator: core: create unlocked version of regulator_set_voltage
  regulator: arizona-ldo1: Fix handling of GPIO 0
  regulator: da9053: Update regulator for DA9053 BC silicon support
  regulator: max77802: Separate sections for nodes and properties
  regulator: max77802: Add input supply properties to DT binding doc
  regulator: axp20x: set supply names for AXP22X DC1SW/DC5LDO internally
  regulator: axp20x: Drop AXP221 DC1SW and DC5LDO regulator supplies from bindings
  mfd: tps6105x: Use i2c regmap to access registers
  regulator: act8865: add DT binding for property "active-semi,vsel-high"
  regulator: act8865: support output voltage by VSET2[] bits
  regulator: arizona: add support for WM8998 and WM1814
  regulator: core: create unlocked version of regulator_list_voltage
  ...

Documentation/devicetree/bindings/mfd/axp20x.txt

@@ -60,8 +60,8 @@ DCDC2		: DC-DC buck	: vin2-supply
 DCDC3		: DC-DC	buck	: vin3-supply
 DCDC4		: DC-DC	buck	: vin4-supply
 DCDC5		: DC-DC	buck	: vin5-supply
-DC1SW		: On/Off Switch	: dcdc1-supply		: DCDC1 secondary output
+DC1SW		: On/Off Switch	:			: DCDC1 secondary output
-DC5LDO		: LDO		: dcdc5-supply		: input from DCDC5
+DC5LDO		: LDO		:			: input from DCDC5
 ALDO1		: LDO		: aldoin-supply		: shared supply
 ALDO2		: LDO		: aldoin-supply		: shared supply
 ALDO3		: LDO		: aldoin-supply		: shared supply

Documentation/devicetree/bindings/regulator/act8865-regulator.txt

@@ -8,6 +8,8 @@ Required properties:
 Optional properties:
 - system-power-controller: Telling whether or not this pmic is controlling
   the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
+- active-semi,vsel-high: Indicates the VSEL pin is high.
+  If this property is missing, assume the VSEL pin is low(0).
 
 Optional input supply properties:
 - for act8600:
@@ -49,6 +51,7 @@ Example:
 			pmic: act8865@5b {
 				compatible = "active-semi,act8865";
 				reg = <0x5b>;
+				active-semi,vsel-high;
 				status = "disabled";
 
 				regulators {

Documentation/devicetree/bindings/regulator/anatop-regulator.txt

@@ -13,6 +13,7 @@ Optional properties:
 - anatop-delay-reg-offset: Anatop MFD step time register offset
 - anatop-delay-bit-shift: Bit shift for the step time register
 - anatop-delay-bit-width: Number of bits used in the step time register
+- vin-supply: The supply for this regulator
 
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.

Documentation/devicetree/bindings/regulator/arizona-regulator.txt

@@ -0,0 +1,17 @@
+Cirrus Logic Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+This document lists regulator specific bindings, see the primary binding
+document:
+  ../mfd/arizona.txt
+
+Optional properties:
+  - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
+
+Optional subnodes:
+  - ldo1 : Initial data for the LDO1 regulator, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt
+  - micvdd : Initial data for the MICVDD regulator, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt

Documentation/devicetree/bindings/regulator/max77802.txt

@@ -8,7 +8,28 @@ regulators that can be controlled over I2C.
 
 Following properties should be present in main device node of the MFD chip.
 
-Optional node:
+Optional properties:
+- inb1-supply:  The input supply for BUCK1
+- inb2-supply:  The input supply for BUCK2
+- inb3-supply:  The input supply for BUCK3
+- inb4-supply:  The input supply for BUCK4
+- inb5-supply:  The input supply for BUCK5
+- inb6-supply:  The input supply for BUCK6
+- inb7-supply:  The input supply for BUCK7
+- inb8-supply:  The input supply for BUCK8
+- inb9-supply:  The input supply for BUCK9
+- inb10-supply: The input supply for BUCK10
+- inl1-supply:  The input supply for LDO8 and LDO15
+- inl2-supply:  The input supply for LDO17, LDO27, LDO30 and LDO35
+- inl3-supply:  The input supply for LDO3, LDO5, LDO6 and LDO7
+- inl4-supply:  The input supply for LDO10, LDO11, LDO13 and LDO14
+- inl5-supply:  The input supply for LDO9 and LDO19
+- inl6-supply:  The input supply for LDO4, LDO21, LDO24 and LDO33
+- inl7-supply:  The input supply for LDO18, LDO20, LDO28 and LDO29
+- inl9-supply:  The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34
+- inl10-supply: The input supply for LDO1 and LDO2
+
+Optional nodes:
 - regulators : The regulators of max77802 have to be instantiated
   under subnode named "regulators" using the following format.
 
@@ -58,6 +79,8 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		inb1-supply = <&parent_reg>;
+
 		regulators {
 			ldo1_reg: LDO1 {
 				regulator-name = "vdd_1v0";

Documentation/devicetree/bindings/regulator/regulator.txt

@@ -11,6 +11,7 @@ Optional properties:
 - regulator-always-on: boolean, regulator should never be disabled
 - regulator-boot-on: bootloader/firmware enabled regulator
 - regulator-allow-bypass: allow the regulator to go into bypass mode
+- regulator-allow-set-load: allow the regulator performance level to be configured
 - <name>-supply: phandle to the parent supply/regulator node
 - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
   For hardware which supports disabling ramp rate, it should be explicitly

Documentation/devicetree/bindings/regulator/tps65023.txt

@@ -0,0 +1,60 @@
+TPS65023 family of regulators
+
+Required properties:
+- compatible: Must be one of the following.
+	"ti,tps65020",
+	"ti,tps65021",
+	"ti,tps65023",
+- reg: I2C slave address
+- regulators: list of regulators provided by this controller, must be named
+  after their hardware counterparts: VDCDC[1-3] and LDO[1-2]
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. The definition for each of
+  these nodes is defined using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps65023@48 {
+		compatible = "ti,tps65023";
+		reg = <0x48>;
+
+		regulators {
+			VDCDC1 {
+				regulator-name = "vdd_mpu";
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			VDCDC2 {
+				regulator-name = "vdd_core";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			VDCDC3 {
+				regulator-name = "vdd_io";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO1 {
+				regulator-name = "vdd_usb18";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO2 {
+				regulator-name = "vdd_usb33";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};

drivers/mfd/tps6105x.c

@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/mutex.h>
+#include <linux/regmap.h>
 #include <linux/gpio.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
@@ -25,73 +25,18 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6105x.h>
 
-int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value)
+static struct regmap_config tps6105x_regmap_config = {
-{
+	.reg_bits = 8,
-	int ret;
+	.val_bits = 8,
-
+	.max_register = TPS6105X_REG_3,
-	ret = mutex_lock_interruptible(&tps6105x->lock);
+};
-	if (ret)
-		return ret;
-	ret = i2c_smbus_write_byte_data(tps6105x->client, reg, value);
-	mutex_unlock(&tps6105x->lock);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-EXPORT_SYMBOL(tps6105x_set);
-
-int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf)
-{
-	int ret;
-
-	ret = mutex_lock_interruptible(&tps6105x->lock);
-	if (ret)
-		return ret;
-	ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
-	mutex_unlock(&tps6105x->lock);
-	if (ret < 0)
-		return ret;
-
-	*buf = ret;
-	return 0;
-}
-EXPORT_SYMBOL(tps6105x_get);
-
-/*
- * Masks off the bits in the mask and sets the bits in the bitvalues
- * parameter in one atomic operation
- */
-int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
-			  u8 bitmask, u8 bitvalues)
-{
-	int ret;
-	u8 regval;
-
-	ret = mutex_lock_interruptible(&tps6105x->lock);
-	if (ret)
-		return ret;
-	ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
-	if (ret < 0)
-		goto fail;
-	regval = ret;
-	regval = (~bitmask & regval) | (bitmask & bitvalues);
-	ret = i2c_smbus_write_byte_data(tps6105x->client, reg, regval);
-fail:
-	mutex_unlock(&tps6105x->lock);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-EXPORT_SYMBOL(tps6105x_mask_and_set);
 
 static int tps6105x_startup(struct tps6105x *tps6105x)
 {
 	int ret;
-	u8 regval;
+	unsigned int regval;
 
-	ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
+	ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
 	if (ret)
 		return ret;
 	switch (regval >> TPS6105X_REG0_MODE_SHIFT) {
@@ -145,11 +90,14 @@ static int tps6105x_probe(struct i2c_client *client,
 	if (!tps6105x)
 		return -ENOMEM;
 
+	tps6105x->regmap = devm_regmap_init_i2c(client, &tps6105x_regmap_config);
+	if (IS_ERR(tps6105x->regmap))
+		return PTR_ERR(tps6105x->regmap);
+
 	i2c_set_clientdata(client, tps6105x);
 	tps6105x->client = client;
 	pdata = dev_get_platdata(&client->dev);
 	tps6105x->pdata = pdata;
-	mutex_init(&tps6105x->lock);
 
 	ret = tps6105x_startup(tps6105x);
 	if (ret) {
@@ -198,7 +146,7 @@ static int tps6105x_remove(struct i2c_client *client)
 	mfd_remove_devices(&client->dev);
 
 	/* Put chip in shutdown mode */
-	tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 		TPS6105X_REG0_MODE_MASK,
 		TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
 

drivers/regulator/Kconfig

@@ -627,7 +627,7 @@ config REGULATOR_TI_ABB
 
 config REGULATOR_STW481X_VMMC
 	bool "ST Microelectronics STW481X VMMC regulator"
-	depends on MFD_STW481X
+	depends on MFD_STW481X || COMPILE_TEST
 	default y if MFD_STW481X
 	help
 	  This driver supports the internal VMMC regulator in the STw481x

drivers/regulator/act8865-regulator.c

@@ -261,6 +261,16 @@ static const struct regulator_desc act8865_regulators[] = {
 	ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
 };
 
+static const struct regulator_desc act8865_alt_regulators[] = {
+	ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"),
+	ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"),
+	ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"),
+	ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
+	ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
+	ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
+	ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
+};
+
 #ifdef CONFIG_OF
 static const struct of_device_id act8865_dt_ids[] = {
 	{ .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
@@ -413,6 +423,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
 	struct act8865 *act8865;
 	unsigned long type;
 	int off_reg, off_mask;
+	int voltage_select = 0;
 
 	pdata = dev_get_platdata(dev);
 
@@ -424,6 +435,10 @@ static int act8865_pmic_probe(struct i2c_client *client,
 			return -ENODEV;
 
 		type = (unsigned long) id->data;
+
+		voltage_select = !!of_get_property(dev->of_node,
+						   "active-semi,vsel-high",
+						   NULL);
 	} else {
 		type = i2c_id->driver_data;
 	}
@@ -442,8 +457,13 @@ static int act8865_pmic_probe(struct i2c_client *client,
 		off_mask = ACT8846_OFF_SYSMASK;
 		break;
 	case ACT8865:
-		regulators = act8865_regulators;
+		if (voltage_select) {
-		num_regulators = ARRAY_SIZE(act8865_regulators);
+			regulators = act8865_alt_regulators;
+			num_regulators = ARRAY_SIZE(act8865_alt_regulators);
+		} else {
+			regulators = act8865_regulators;
+			num_regulators = ARRAY_SIZE(act8865_regulators);
+		}
 		off_reg = ACT8865_SYS_CTRL;
 		off_mask = ACT8865_MSTROFF;
 		break;

drivers/regulator/anatop-regulator.c

@@ -30,6 +30,7 @@
 #include <linux/regmap.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
 
 #define LDO_RAMP_UP_UNIT_IN_CYCLES      64 /* 64 cycles per step */
 #define LDO_RAMP_UP_FREQ_IN_MHZ         24 /* cycle based on 24M OSC */
@@ -199,6 +200,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 	rdesc->owner = THIS_MODULE;
 
 	initdata = of_get_regulator_init_data(dev, np, rdesc);
+	initdata->supply_regulator = "vin";
 	sreg->initdata = initdata;
 
 	anatop_np = of_get_parent(np);
@@ -262,6 +264,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 	rdesc->vsel_reg = sreg->control_reg;
 	rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) <<
 			   sreg->vol_bit_shift;
+	rdesc->min_dropout_uV = 125000;
 
 	config.dev = &pdev->dev;
 	config.init_data = initdata;

drivers/regulator/arizona-ldo1.c

@@ -17,6 +17,7 @@
 #include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
@@ -189,13 +190,22 @@ static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
 {
 	struct arizona_pdata *pdata = &arizona->pdata;
 	struct arizona_ldo1 *ldo1 = config->driver_data;
+	struct device_node *np = arizona->dev->of_node;
 	struct device_node *init_node, *dcvdd_node;
 	struct regulator_init_data *init_data;
 
-	pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true);
+	pdata->ldoena = of_get_named_gpio(np, "wlf,ldoena", 0);
+	if (pdata->ldoena < 0) {
+		dev_warn(arizona->dev,
+			 "LDOENA GPIO property missing/malformed: %d\n",
+			 pdata->ldoena);
+		pdata->ldoena = 0;
+	} else {
+		config->ena_gpio_initialized = true;
+	}
 
-	init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1");
+	init_node = of_get_child_by_name(np, "ldo1");
-	dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0);
+	dcvdd_node = of_parse_phandle(np, "DCVDD-supply", 0);
 
 	if (init_node) {
 		config->of_node = init_node;
@@ -245,6 +255,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 	switch (arizona->type) {
 	case WM5102:
 	case WM8997:
+	case WM8998:
+	case WM1814:
 		desc = &arizona_ldo1_hc;
 		ldo1->init_data = arizona_ldo1_dvfs;
 		break;
@@ -272,8 +284,6 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 			ret = arizona_ldo1_of_get_pdata(arizona, &config, desc);
 			if (ret < 0)
 				return ret;
-
-			config.ena_gpio_initialized = true;
 		}
 	}
 

drivers/regulator/axp20x-regulator.c

@@ -196,10 +196,10 @@ static const struct regulator_desc axp22x_regulators[] = {
 	AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
 		 AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
 	/* secondary switchable output of DCDC1 */
-	AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", "dcdc1", 1600, 3400, 100,
+	AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100,
 		    AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)),
 	/* LDO regulator internally chained to DCDC5 */
-	AXP_DESC(AXP22X, DC5LDO, "dc5ldo", "dcdc5", 700, 1400, 100,
+	AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
 		 AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
 	AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
 		 AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
@@ -350,6 +350,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 	};
 	int ret, i, nregulators;
 	u32 workmode;
+	const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name;
+	const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name;
 
 	switch (axp20x->variant) {
 	case AXP202_ID:
@@ -371,8 +373,37 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 	axp20x_regulator_parse_dt(pdev);
 
 	for (i = 0; i < nregulators; i++) {
-		rdev = devm_regulator_register(&pdev->dev, &regulators[i],
+		const struct regulator_desc *desc = &regulators[i];
-					       &config);
+		struct regulator_desc *new_desc;
+
+		/*
+		 * Regulators DC1SW and DC5LDO are connected internally,
+		 * so we have to handle their supply names separately.
+		 *
+		 * We always register the regulators in proper sequence,
+		 * so the supply names are correctly read. See the last
+		 * part of this loop to see where we save the DT defined
+		 * name.
+		 */
+		if (regulators == axp22x_regulators) {
+			if (i == AXP22X_DC1SW) {
+				new_desc = devm_kzalloc(&pdev->dev,
+							sizeof(*desc),
+							GFP_KERNEL);
+				*new_desc = regulators[i];
+				new_desc->supply_name = axp22x_dc1_name;
+				desc = new_desc;
+			} else if (i == AXP22X_DC5LDO) {
+				new_desc = devm_kzalloc(&pdev->dev,
+							sizeof(*desc),
+							GFP_KERNEL);
+				*new_desc = regulators[i];
+				new_desc->supply_name = axp22x_dc5_name;
+				desc = new_desc;
+			}
+		}
+
+		rdev = devm_regulator_register(&pdev->dev, desc, &config);
 		if (IS_ERR(rdev)) {
 			dev_err(&pdev->dev, "Failed to register %s\n",
 				regulators[i].name);
@@ -388,6 +419,21 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 				dev_err(&pdev->dev, "Failed to set workmode on %s\n",
 					rdev->desc->name);
 		}
+
+		/*
+		 * Save AXP22X DCDC1 / DCDC5 regulator names for later.
+		 */
+		if (regulators == axp22x_regulators) {
+			/* Can we use rdev->constraints->name instead? */
+			if (i == AXP22X_DCDC1)
+				of_property_read_string(rdev->dev.of_node,
+							"regulator-name",
+							&axp22x_dc1_name);
+			else if (i == AXP22X_DCDC5)
+				of_property_read_string(rdev->dev.of_node,
+							"regulator-name",
+							&axp22x_dc5_name);
+		}
 	}
 
 	return 0;

drivers/regulator/bcm590xx-regulator.c

@@ -244,7 +244,7 @@ static int bcm590xx_get_enable_register(int id)
 			break;
 		case BCM590XX_REG_VBUS:
 			reg = BCM590XX_OTG_CTRL;
-		};
+		}
 
 
 	return reg;

drivers/regulator/core.c

@@ -51,7 +51,6 @@
 	pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
 
 static DEFINE_MUTEX(regulator_list_mutex);
-static LIST_HEAD(regulator_list);
 static LIST_HEAD(regulator_map_list);
 static LIST_HEAD(regulator_ena_gpio_list);
 static LIST_HEAD(regulator_supply_alias_list);
@@ -59,6 +58,8 @@ static bool has_full_constraints;
 
 static struct dentry *debugfs_root;
 
+static struct class regulator_class;
+
 /*
  * struct regulator_map
  *
@@ -131,6 +132,45 @@ static bool have_full_constraints(void)
 	return has_full_constraints || of_have_populated_dt();
 }
 
+/**
+ * regulator_lock_supply - lock a regulator and its supplies
+ * @rdev:         regulator source
+ */
+static void regulator_lock_supply(struct regulator_dev *rdev)
+{
+	struct regulator *supply;
+	int i = 0;
+
+	while (1) {
+		mutex_lock_nested(&rdev->mutex, i++);
+		supply = rdev->supply;
+
+		if (!rdev->supply)
+			return;
+
+		rdev = supply->rdev;
+	}
+}
+
+/**
+ * regulator_unlock_supply - unlock a regulator and its supplies
+ * @rdev:         regulator source
+ */
+static void regulator_unlock_supply(struct regulator_dev *rdev)
+{
+	struct regulator *supply;
+
+	while (1) {
+		mutex_unlock(&rdev->mutex);
+		supply = rdev->supply;
+
+		if (!rdev->supply)
+			return;
+
+		rdev = supply->rdev;
+	}
+}
+
 /**
  * of_get_regulator - get a regulator device node based on supply name
  * @dev: Device pointer for the consumer (of regulator) device
@@ -180,7 +220,7 @@ static int regulator_check_voltage(struct regulator_dev *rdev,
 		return -ENODEV;
 	}
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
-		rdev_err(rdev, "operation not allowed\n");
+		rdev_err(rdev, "voltage operation not allowed\n");
 		return -EPERM;
 	}
 
@@ -240,7 +280,7 @@ static int regulator_check_current_limit(struct regulator_dev *rdev,
 		return -ENODEV;
 	}
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
-		rdev_err(rdev, "operation not allowed\n");
+		rdev_err(rdev, "current operation not allowed\n");
 		return -EPERM;
 	}
 
@@ -277,7 +317,7 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
 		return -ENODEV;
 	}
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
-		rdev_err(rdev, "operation not allowed\n");
+		rdev_err(rdev, "mode operation not allowed\n");
 		return -EPERM;
 	}
 
@@ -301,7 +341,7 @@ static int regulator_check_drms(struct regulator_dev *rdev)
 		return -ENODEV;
 	}
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
-		rdev_dbg(rdev, "operation not allowed\n");
+		rdev_dbg(rdev, "drms operation not allowed\n");
 		return -EPERM;
 	}
 	return 0;
@@ -1325,6 +1365,47 @@ static void regulator_supply_alias(struct device **dev, const char **supply)
 	}
 }
 
+static int of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+static struct regulator_dev *of_find_regulator_by_node(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = class_find_device(&regulator_class, NULL, np, of_node_match);
+
+	return dev ? dev_to_rdev(dev) : NULL;
+}
+
+static int regulator_match(struct device *dev, const void *data)
+{
+	struct regulator_dev *r = dev_to_rdev(dev);
+
+	return strcmp(rdev_get_name(r), data) == 0;
+}
+
+static struct regulator_dev *regulator_lookup_by_name(const char *name)
+{
+	struct device *dev;
+
+	dev = class_find_device(&regulator_class, NULL, name, regulator_match);
+
+	return dev ? dev_to_rdev(dev) : NULL;
+}
+
+/**
+ * regulator_dev_lookup - lookup a regulator device.
+ * @dev: device for regulator "consumer".
+ * @supply: Supply name or regulator ID.
+ * @ret: 0 on success, -ENODEV if lookup fails permanently, -EPROBE_DEFER if
+ * lookup could succeed in the future.
+ *
+ * If successful, returns a struct regulator_dev that corresponds to the name
+ * @supply and with the embedded struct device refcount incremented by one,
+ * or NULL on failure. The refcount must be dropped by calling put_device().
+ */
 static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 						  const char *supply,
 						  int *ret)
@@ -1340,10 +1421,9 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 	if (dev && dev->of_node) {
 		node = of_get_regulator(dev, supply);
 		if (node) {
-			list_for_each_entry(r, &regulator_list, list)
+			r = of_find_regulator_by_node(node);
-				if (r->dev.parent &&
+			if (r)
-					node == r->dev.of_node)
+				return r;
-					return r;
 			*ret = -EPROBE_DEFER;
 			return NULL;
 		} else {
@@ -1361,20 +1441,24 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 	if (dev)
 		devname = dev_name(dev);
 
-	list_for_each_entry(r, &regulator_list, list)
+	r = regulator_lookup_by_name(supply);
-		if (strcmp(rdev_get_name(r), supply) == 0)
+	if (r)
-			return r;
+		return r;
 
+	mutex_lock(&regulator_list_mutex);
 	list_for_each_entry(map, &regulator_map_list, list) {
 		/* If the mapping has a device set up it must match */
 		if (map->dev_name &&
 		    (!devname || strcmp(map->dev_name, devname)))
 			continue;
 
-		if (strcmp(map->supply, supply) == 0)
+		if (strcmp(map->supply, supply) == 0 &&
+		    get_device(&map->regulator->dev)) {
+			mutex_unlock(&regulator_list_mutex);
 			return map->regulator;
+		}
 	}
-
+	mutex_unlock(&regulator_list_mutex);
 
 	return NULL;
 }
@@ -1409,6 +1493,7 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 
 		if (have_full_constraints()) {
 			r = dummy_regulator_rdev;
+			get_device(&r->dev);
 		} else {
 			dev_err(dev, "Failed to resolve %s-supply for %s\n",
 				rdev->supply_name, rdev->desc->name);
@@ -1418,12 +1503,16 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 
 	/* Recursively resolve the supply of the supply */
 	ret = regulator_resolve_supply(r);
-	if (ret < 0)
+	if (ret < 0) {
+		put_device(&r->dev);
 		return ret;
+	}
 
 	ret = set_supply(rdev, r);
-	if (ret < 0)
+	if (ret < 0) {
+		put_device(&r->dev);
 		return ret;
+	}
 
 	/* Cascade always-on state to supply */
 	if (_regulator_is_enabled(rdev) && rdev->supply) {
@@ -1459,8 +1548,6 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 	else
 		ret = -EPROBE_DEFER;
 
-	mutex_lock(&regulator_list_mutex);
-
 	rdev = regulator_dev_lookup(dev, id, &ret);
 	if (rdev)
 		goto found;
@@ -1472,7 +1559,7 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 	 * succeed, so, quit with appropriate error value
 	 */
 	if (ret && ret != -ENODEV)
-		goto out;
+		return regulator;
 
 	if (!devname)
 		devname = "deviceless";
@@ -1486,40 +1573,46 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 			devname, id);
 
 		rdev = dummy_regulator_rdev;
+		get_device(&rdev->dev);
 		goto found;
 	/* Don't log an error when called from regulator_get_optional() */
 	} else if (!have_full_constraints() || exclusive) {
 		dev_warn(dev, "dummy supplies not allowed\n");
 	}
 
-	mutex_unlock(&regulator_list_mutex);
 	return regulator;
 
 found:
 	if (rdev->exclusive) {
 		regulator = ERR_PTR(-EPERM);
-		goto out;
+		put_device(&rdev->dev);
+		return regulator;
 	}
 
 	if (exclusive && rdev->open_count) {
 		regulator = ERR_PTR(-EBUSY);
-		goto out;
+		put_device(&rdev->dev);
+		return regulator;
 	}
 
 	ret = regulator_resolve_supply(rdev);
 	if (ret < 0) {
 		regulator = ERR_PTR(ret);
-		goto out;
+		put_device(&rdev->dev);
+		return regulator;
 	}
 
-	if (!try_module_get(rdev->owner))
+	if (!try_module_get(rdev->owner)) {
-		goto out;
+		put_device(&rdev->dev);
+		return regulator;
+	}
 
 	regulator = create_regulator(rdev, dev, id);
 	if (regulator == NULL) {
 		regulator = ERR_PTR(-ENOMEM);
+		put_device(&rdev->dev);
 		module_put(rdev->owner);
-		goto out;
+		return regulator;
 	}
 
 	rdev->open_count++;
@@ -1533,9 +1626,6 @@ found:
 			rdev->use_count = 0;
 	}
 
-out:
-	mutex_unlock(&regulator_list_mutex);
-
 	return regulator;
 }
 
@@ -1633,6 +1723,7 @@ static void _regulator_put(struct regulator *regulator)
 
 	rdev->open_count--;
 	rdev->exclusive = 0;
+	put_device(&rdev->dev);
 	mutex_unlock(&rdev->mutex);
 
 	kfree(regulator->supply_name);
@@ -2312,6 +2403,40 @@ static int _regulator_is_enabled(struct regulator_dev *rdev)
 	return rdev->desc->ops->is_enabled(rdev);
 }
 
+static int _regulator_list_voltage(struct regulator *regulator,
+				    unsigned selector, int lock)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	const struct regulator_ops *ops = rdev->desc->ops;
+	int ret;
+
+	if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
+		return rdev->desc->fixed_uV;
+
+	if (ops->list_voltage) {
+		if (selector >= rdev->desc->n_voltages)
+			return -EINVAL;
+		if (lock)
+			mutex_lock(&rdev->mutex);
+		ret = ops->list_voltage(rdev, selector);
+		if (lock)
+			mutex_unlock(&rdev->mutex);
+	} else if (rdev->supply) {
+		ret = _regulator_list_voltage(rdev->supply, selector, lock);
+	} else {
+		return -EINVAL;
+	}
+
+	if (ret > 0) {
+		if (ret < rdev->constraints->min_uV)
+			ret = 0;
+		else if (ret > rdev->constraints->max_uV)
+			ret = 0;
+	}
+
+	return ret;
+}
+
 /**
  * regulator_is_enabled - is the regulator output enabled
  * @regulator: regulator source
@@ -2401,33 +2526,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages);
  */
 int regulator_list_voltage(struct regulator *regulator, unsigned selector)
 {
-	struct regulator_dev *rdev = regulator->rdev;
+	return _regulator_list_voltage(regulator, selector, 1);
-	const struct regulator_ops *ops = rdev->desc->ops;
-	int ret;
-
-	if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
-		return rdev->desc->fixed_uV;
-
-	if (ops->list_voltage) {
-		if (selector >= rdev->desc->n_voltages)
-			return -EINVAL;
-		mutex_lock(&rdev->mutex);
-		ret = ops->list_voltage(rdev, selector);
-		mutex_unlock(&rdev->mutex);
-	} else if (rdev->supply) {
-		ret = regulator_list_voltage(rdev->supply, selector);
-	} else {
-		return -EINVAL;
-	}
-
-	if (ret > 0) {
-		if (ret < rdev->constraints->min_uV)
-			ret = 0;
-		else if (ret > rdev->constraints->max_uV)
-			ret = 0;
-	}
-
-	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_list_voltage);
 
@@ -2562,6 +2661,23 @@ int regulator_is_supported_voltage(struct regulator *regulator,
 }
 EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);
 
+static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV,
+				 int max_uV)
+{
+	const struct regulator_desc *desc = rdev->desc;
+
+	if (desc->ops->map_voltage)
+		return desc->ops->map_voltage(rdev, min_uV, max_uV);
+
+	if (desc->ops->list_voltage == regulator_list_voltage_linear)
+		return regulator_map_voltage_linear(rdev, min_uV, max_uV);
+
+	if (desc->ops->list_voltage == regulator_list_voltage_linear_range)
+		return regulator_map_voltage_linear_range(rdev, min_uV, max_uV);
+
+	return regulator_map_voltage_iterate(rdev, min_uV, max_uV);
+}
+
 static int _regulator_call_set_voltage(struct regulator_dev *rdev,
 				       int min_uV, int max_uV,
 				       unsigned *selector)
@@ -2650,23 +2766,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 		}
 
 	} else if (rdev->desc->ops->set_voltage_sel) {
-		if (rdev->desc->ops->map_voltage) {
+		ret = regulator_map_voltage(rdev, min_uV, max_uV);
-			ret = rdev->desc->ops->map_voltage(rdev, min_uV,
-							   max_uV);
-		} else {
-			if (rdev->desc->ops->list_voltage ==
-			    regulator_list_voltage_linear)
-				ret = regulator_map_voltage_linear(rdev,
-								min_uV, max_uV);
-			else if (rdev->desc->ops->list_voltage ==
-				 regulator_list_voltage_linear_range)
-				ret = regulator_map_voltage_linear_range(rdev,
-								min_uV, max_uV);
-			else
-				ret = regulator_map_voltage_iterate(rdev,
-								min_uV, max_uV);
-		}
-
 		if (ret >= 0) {
 			best_val = rdev->desc->ops->list_voltage(rdev, ret);
 			if (min_uV <= best_val && max_uV >= best_val) {
@@ -2717,32 +2817,15 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	return ret;
 }
 
-/**
+static int regulator_set_voltage_unlocked(struct regulator *regulator,
- * regulator_set_voltage - set regulator output voltage
+					  int min_uV, int max_uV)
- * @regulator: regulator source
- * @min_uV: Minimum required voltage in uV
- * @max_uV: Maximum acceptable voltage in uV
- *
- * Sets a voltage regulator to the desired output voltage. This can be set
- * during any regulator state. IOW, regulator can be disabled or enabled.
- *
- * If the regulator is enabled then the voltage will change to the new value
- * immediately otherwise if the regulator is disabled the regulator will
- * output at the new voltage when enabled.
- *
- * NOTE: If the regulator is shared between several devices then the lowest
- * request voltage that meets the system constraints will be used.
- * Regulator system constraints must be set for this regulator before
- * calling this function otherwise this call will fail.
- */
-int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 {
 	struct regulator_dev *rdev = regulator->rdev;
 	int ret = 0;
 	int old_min_uV, old_max_uV;
 	int current_uV;
-
+	int best_supply_uV = 0;
-	mutex_lock(&rdev->mutex);
+	int supply_change_uV = 0;
 
 	/* If we're setting the same range as last time the change
 	 * should be a noop (some cpufreq implementations use the same
@@ -2786,17 +2869,95 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 	if (ret < 0)
 		goto out2;
 
+	if (rdev->supply && (rdev->desc->min_dropout_uV ||
+				!rdev->desc->ops->get_voltage)) {
+		int current_supply_uV;
+		int selector;
+
+		selector = regulator_map_voltage(rdev, min_uV, max_uV);
+		if (selector < 0) {
+			ret = selector;
+			goto out2;
+		}
+
+		best_supply_uV = _regulator_list_voltage(regulator, selector, 0);
+		if (best_supply_uV < 0) {
+			ret = best_supply_uV;
+			goto out2;
+		}
+
+		best_supply_uV += rdev->desc->min_dropout_uV;
+
+		current_supply_uV = _regulator_get_voltage(rdev->supply->rdev);
+		if (current_supply_uV < 0) {
+			ret = current_supply_uV;
+			goto out2;
+		}
+
+		supply_change_uV = best_supply_uV - current_supply_uV;
+	}
+
+	if (supply_change_uV > 0) {
+		ret = regulator_set_voltage_unlocked(rdev->supply,
+				best_supply_uV, INT_MAX);
+		if (ret) {
+			dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n",
+					ret);
+			goto out2;
+		}
+	}
+
 	ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
 	if (ret < 0)
 		goto out2;
 
+	if (supply_change_uV < 0) {
+		ret = regulator_set_voltage_unlocked(rdev->supply,
+				best_supply_uV, INT_MAX);
+		if (ret)
+			dev_warn(&rdev->dev, "Failed to decrease supply voltage: %d\n",
+					ret);
+		/* No need to fail here */
+		ret = 0;
+	}
+
 out:
-	mutex_unlock(&rdev->mutex);
 	return ret;
 out2:
 	regulator->min_uV = old_min_uV;
 	regulator->max_uV = old_max_uV;
-	mutex_unlock(&rdev->mutex);
+
+	return ret;
+}
+
+/**
+ * regulator_set_voltage - set regulator output voltage
+ * @regulator: regulator source
+ * @min_uV: Minimum required voltage in uV
+ * @max_uV: Maximum acceptable voltage in uV
+ *
+ * Sets a voltage regulator to the desired output voltage. This can be set
+ * during any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the voltage will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new voltage when enabled.
+ *
+ * NOTE: If the regulator is shared between several devices then the lowest
+ * request voltage that meets the system constraints will be used.
+ * Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
+{
+	int ret = 0;
+
+	regulator_lock_supply(regulator->rdev);
+
+	ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV);
+
+	regulator_unlock_supply(regulator->rdev);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage);
@@ -2949,7 +3110,7 @@ static int _regulator_get_voltage(struct regulator_dev *rdev)
 	} else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) {
 		ret = rdev->desc->fixed_uV;
 	} else if (rdev->supply) {
-		ret = regulator_get_voltage(rdev->supply);
+		ret = _regulator_get_voltage(rdev->supply->rdev);
 	} else {
 		return -EINVAL;
 	}
@@ -2972,11 +3133,11 @@ int regulator_get_voltage(struct regulator *regulator)
 {
 	int ret;
 
-	mutex_lock(&regulator->rdev->mutex);
+	regulator_lock_supply(regulator->rdev);
 
 	ret = _regulator_get_voltage(regulator->rdev);
 
-	mutex_unlock(&regulator->rdev->mutex);
+	regulator_unlock_supply(regulator->rdev);
 
 	return ret;
 }
@@ -3810,8 +3971,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
 		}
 	}
 
-	list_add(&rdev->list, &regulator_list);
-
 	rdev_init_debugfs(rdev);
 out:
 	mutex_unlock(&regulator_list_mutex);
@@ -3865,6 +4024,19 @@ void regulator_unregister(struct regulator_dev *rdev)
 }
 EXPORT_SYMBOL_GPL(regulator_unregister);
 
+static int _regulator_suspend_prepare(struct device *dev, void *data)
+{
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	const suspend_state_t *state = data;
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+	ret = suspend_prepare(rdev, *state);
+	mutex_unlock(&rdev->mutex);
+
+	return ret;
+}
+
 /**
  * regulator_suspend_prepare - prepare regulators for system wide suspend
  * @state: system suspend state
@@ -3874,31 +4046,46 @@ EXPORT_SYMBOL_GPL(regulator_unregister);
  */
 int regulator_suspend_prepare(suspend_state_t state)
 {
-	struct regulator_dev *rdev;
-	int ret = 0;
-
 	/* ON is handled by regulator active state */
 	if (state == PM_SUSPEND_ON)
 		return -EINVAL;
 
-	mutex_lock(&regulator_list_mutex);
+	return class_for_each_device(&regulator_class, NULL, &state,
-	list_for_each_entry(rdev, &regulator_list, list) {
+				     _regulator_suspend_prepare);
-
-		mutex_lock(&rdev->mutex);
-		ret = suspend_prepare(rdev, state);
-		mutex_unlock(&rdev->mutex);
-
-		if (ret < 0) {
-			rdev_err(rdev, "failed to prepare\n");
-			goto out;
-		}
-	}
-out:
-	mutex_unlock(&regulator_list_mutex);
-	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
 
+static int _regulator_suspend_finish(struct device *dev, void *data)
+{
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+	if (rdev->use_count > 0  || rdev->constraints->always_on) {
+		if (!_regulator_is_enabled(rdev)) {
+			ret = _regulator_do_enable(rdev);
+			if (ret)
+				dev_err(dev,
+					"Failed to resume regulator %d\n",
+					ret);
+		}
+	} else {
+		if (!have_full_constraints())
+			goto unlock;
+		if (!_regulator_is_enabled(rdev))
+			goto unlock;
+
+		ret = _regulator_do_disable(rdev);
+		if (ret)
+			dev_err(dev, "Failed to suspend regulator %d\n", ret);
+	}
+unlock:
+	mutex_unlock(&rdev->mutex);
+
+	/* Keep processing regulators in spite of any errors */
+	return 0;
+}
+
 /**
  * regulator_suspend_finish - resume regulators from system wide suspend
  *
@@ -3907,33 +4094,8 @@ EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
  */
 int regulator_suspend_finish(void)
 {
-	struct regulator_dev *rdev;
+	return class_for_each_device(&regulator_class, NULL, NULL,
-	int ret = 0, error;
+				     _regulator_suspend_finish);
-
-	mutex_lock(&regulator_list_mutex);
-	list_for_each_entry(rdev, &regulator_list, list) {
-		mutex_lock(&rdev->mutex);
-		if (rdev->use_count > 0  || rdev->constraints->always_on) {
-			if (!_regulator_is_enabled(rdev)) {
-				error = _regulator_do_enable(rdev);
-				if (error)
-					ret = error;
-			}
-		} else {
-			if (!have_full_constraints())
-				goto unlock;
-			if (!_regulator_is_enabled(rdev))
-				goto unlock;
-
-			error = _regulator_do_disable(rdev);
-			if (error)
-				ret = error;
-		}
-unlock:
-		mutex_unlock(&rdev->mutex);
-	}
-	mutex_unlock(&regulator_list_mutex);
-	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_suspend_finish);
 
@@ -4053,14 +4215,35 @@ static const struct file_operations supply_map_fops = {
 };
 
 #ifdef CONFIG_DEBUG_FS
+struct summary_data {
+	struct seq_file *s;
+	struct regulator_dev *parent;
+	int level;
+};
+
+static void regulator_summary_show_subtree(struct seq_file *s,
+					   struct regulator_dev *rdev,
+					   int level);
+
+static int regulator_summary_show_children(struct device *dev, void *data)
+{
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	struct summary_data *summary_data = data;
+
+	if (rdev->supply && rdev->supply->rdev == summary_data->parent)
+		regulator_summary_show_subtree(summary_data->s, rdev,
+					       summary_data->level + 1);
+
+	return 0;
+}
+
 static void regulator_summary_show_subtree(struct seq_file *s,
 					   struct regulator_dev *rdev,
 					   int level)
 {
-	struct list_head *list = s->private;
-	struct regulator_dev *child;
 	struct regulation_constraints *c;
 	struct regulator *consumer;
+	struct summary_data summary_data;
 
 	if (!rdev)
 		return;
@@ -4110,33 +4293,32 @@ static void regulator_summary_show_subtree(struct seq_file *s,
 		seq_puts(s, "\n");
 	}
 
-	list_for_each_entry(child, list, list) {
+	summary_data.s = s;
-		/* handle only non-root regulators supplied by current rdev */
+	summary_data.level = level;
-		if (!child->supply || child->supply->rdev != rdev)
+	summary_data.parent = rdev;
-			continue;
 
-		regulator_summary_show_subtree(s, child, level + 1);
+	class_for_each_device(&regulator_class, NULL, &summary_data,
-	}
+			      regulator_summary_show_children);
+}
+
+static int regulator_summary_show_roots(struct device *dev, void *data)
+{
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	struct seq_file *s = data;
+
+	if (!rdev->supply)
+		regulator_summary_show_subtree(s, rdev, 0);
+
+	return 0;
 }
 
 static int regulator_summary_show(struct seq_file *s, void *data)
 {
-	struct list_head *list = s->private;
-	struct regulator_dev *rdev;
-
 	seq_puts(s, " regulator                      use open bypass voltage current     min     max\n");
 	seq_puts(s, "-------------------------------------------------------------------------------\n");
 
-	mutex_lock(&regulator_list_mutex);
+	class_for_each_device(&regulator_class, NULL, s,
-
+			      regulator_summary_show_roots);
-	list_for_each_entry(rdev, list, list) {
-		if (rdev->supply)
-			continue;
-
-		regulator_summary_show_subtree(s, rdev, 0);
-	}
-
-	mutex_unlock(&regulator_list_mutex);
 
 	return 0;
 }
@@ -4170,7 +4352,7 @@ static int __init regulator_init(void)
 			    &supply_map_fops);
 
 	debugfs_create_file("regulator_summary", 0444, debugfs_root,
-			    &regulator_list, &regulator_summary_fops);
+			    NULL, &regulator_summary_fops);
 
 	regulator_dummy_init();
 

drivers/regulator/da9052-regulator.c

@@ -381,6 +381,7 @@ static inline struct da9052_regulator_info *find_regulator_info(u8 chip_id,
 	case DA9053_AA:
 	case DA9053_BA:
 	case DA9053_BB:
+	case DA9053_BC:
 		for (i = 0; i < ARRAY_SIZE(da9053_regulator_info); i++) {
 			info = &da9053_regulator_info[i];
 			if (info->reg_desc.id == id)

drivers/regulator/da9063-regulator.c

@@ -698,7 +698,7 @@ static struct da9063_regulators_pdata *da9063_parse_regulators_dt(
 		rdata->initdata = da9063_matches[i].init_data;
 
 		n++;
-	};
+	}
 
 	*da9063_reg_matches = da9063_matches;
 	return pdata;

drivers/regulator/of_regulator.c

@@ -76,6 +76,9 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (of_property_read_bool(np, "regulator-allow-bypass"))
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
 
+	if (of_property_read_bool(np, "regulator-allow-set-load"))
+		constraints->valid_ops_mask |= REGULATOR_CHANGE_DRMS;
+
 	ret = of_property_read_u32(np, "regulator-ramp-delay", &pval);
 	if (!ret) {
 		if (pval)

drivers/regulator/pwm-regulator.c

@@ -69,12 +69,6 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
 
 	drvdata->state = selector;
 
-	ret = pwm_enable(drvdata->pwm);
-	if (ret) {
-		dev_err(&rdev->dev, "Failed to enable PWM\n");
-		return ret;
-	}
-
 	return 0;
 }
 
@@ -89,6 +83,29 @@ static int pwm_regulator_list_voltage(struct regulator_dev *rdev,
 	return drvdata->duty_cycle_table[selector].uV;
 }
 
+static int pwm_regulator_enable(struct regulator_dev *dev)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+
+	return pwm_enable(drvdata->pwm);
+}
+
+static int pwm_regulator_disable(struct regulator_dev *dev)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+
+	pwm_disable(drvdata->pwm);
+
+	return 0;
+}
+
+static int pwm_regulator_is_enabled(struct regulator_dev *dev)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+
+	return pwm_is_enabled(drvdata->pwm);
+}
+
 /**
  * Continuous voltage call-backs
  */
@@ -144,11 +161,17 @@ static struct regulator_ops pwm_regulator_voltage_table_ops = {
 	.get_voltage_sel = pwm_regulator_get_voltage_sel,
 	.list_voltage    = pwm_regulator_list_voltage,
 	.map_voltage     = regulator_map_voltage_iterate,
+	.enable          = pwm_regulator_enable,
+	.disable         = pwm_regulator_disable,
+	.is_enabled      = pwm_regulator_is_enabled,
 };
 
 static struct regulator_ops pwm_regulator_voltage_continuous_ops = {
 	.get_voltage = pwm_regulator_get_voltage,
 	.set_voltage = pwm_regulator_set_voltage,
+	.enable          = pwm_regulator_enable,
+	.disable         = pwm_regulator_disable,
+	.is_enabled      = pwm_regulator_is_enabled,
 };
 
 static struct regulator_desc pwm_regulator_desc = {

drivers/regulator/qcom_smd-regulator.c

@@ -36,9 +36,9 @@ struct qcom_rpm_reg {
 };
 
 struct rpm_regulator_req {
-	u32 key;
+	__le32 key;
-	u32 nbytes;
+	__le32 nbytes;
-	u32 value;
+	__le32 value;
 };
 
 #define RPM_KEY_SWEN	0x6e657773 /* "swen" */
@@ -62,9 +62,9 @@ static int rpm_reg_enable(struct regulator_dev *rdev)
 	struct rpm_regulator_req req;
 	int ret;
 
-	req.key = RPM_KEY_SWEN;
+	req.key = cpu_to_le32(RPM_KEY_SWEN);
-	req.nbytes = sizeof(u32);
+	req.nbytes = cpu_to_le32(sizeof(u32));
-	req.value = 1;
+	req.value = cpu_to_le32(1);
 
 	ret = rpm_reg_write_active(vreg, &req, sizeof(req));
 	if (!ret)
@@ -86,8 +86,8 @@ static int rpm_reg_disable(struct regulator_dev *rdev)
 	struct rpm_regulator_req req;
 	int ret;
 
-	req.key = RPM_KEY_SWEN;
+	req.key = cpu_to_le32(RPM_KEY_SWEN);
-	req.nbytes = sizeof(u32);
+	req.nbytes = cpu_to_le32(sizeof(u32));
 	req.value = 0;
 
 	ret = rpm_reg_write_active(vreg, &req, sizeof(req));
@@ -113,9 +113,9 @@ static int rpm_reg_set_voltage(struct regulator_dev *rdev,
 	struct rpm_regulator_req req;
 	int ret = 0;
 
-	req.key = RPM_KEY_UV;
+	req.key = cpu_to_le32(RPM_KEY_UV);
-	req.nbytes = sizeof(u32);
+	req.nbytes = cpu_to_le32(sizeof(u32));
-	req.value = min_uV;
+	req.value = cpu_to_le32(min_uV);
 
 	ret = rpm_reg_write_active(vreg, &req, sizeof(req));
 	if (!ret)
@@ -129,9 +129,9 @@ static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
 	struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
 	struct rpm_regulator_req req;
 
-	req.key = RPM_KEY_MA;
+	req.key = cpu_to_le32(RPM_KEY_MA);
-	req.nbytes = sizeof(u32);
+	req.nbytes = cpu_to_le32(sizeof(u32));
-	req.value = load_uA;
+	req.value = cpu_to_le32(load_uA / 1000);
 
 	return rpm_reg_write_active(vreg, &req, sizeof(req));
 }

drivers/regulator/tps6105x-regulator.c

@@ -14,7 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
-#include <linux/i2c.h>
+#include <linux/regmap.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/mfd/core.h>
@@ -33,7 +33,7 @@ static int tps6105x_regulator_enable(struct regulator_dev *rdev)
 	int ret;
 
 	/* Activate voltage mode */
-	ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 		TPS6105X_REG0_MODE_MASK,
 		TPS6105X_REG0_MODE_VOLTAGE << TPS6105X_REG0_MODE_SHIFT);
 	if (ret)
@@ -48,7 +48,7 @@ static int tps6105x_regulator_disable(struct regulator_dev *rdev)
 	int ret;
 
 	/* Set into shutdown mode */
-	ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 		TPS6105X_REG0_MODE_MASK,
 		TPS6105X_REG0_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
 	if (ret)
@@ -60,10 +60,10 @@ static int tps6105x_regulator_disable(struct regulator_dev *rdev)
 static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev)
 {
 	struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
-	u8 regval;
+	unsigned int regval;
 	int ret;
 
-	ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
+	ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
 	if (ret)
 		return ret;
 	regval &= TPS6105X_REG0_MODE_MASK;
@@ -78,10 +78,10 @@ static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev)
 static int tps6105x_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
-	u8 regval;
+	unsigned int regval;
 	int ret;
 
-	ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
+	ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
 	if (ret)
 		return ret;
 
@@ -96,7 +96,7 @@ static int tps6105x_regulator_set_voltage_sel(struct regulator_dev *rdev,
 	struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
 	int ret;
 
-	ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 				    TPS6105X_REG0_VOLTAGE_MASK,
 				    selector << TPS6105X_REG0_VOLTAGE_SHIFT);
 	if (ret)

drivers/regulator/tps65023-regulator.c

@@ -86,6 +86,42 @@
 
 #define TPS65023_MAX_REG_ID		TPS65023_LDO_2
 
+#define TPS65023_REGULATOR_DCDC(_num, _t, _em)			\
+	{							\
+		.name		= "VDCDC"#_num,			\
+		.of_match	= of_match_ptr("VDCDC"#_num),	\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.id		= TPS65023_DCDC_##_num,		\
+		.n_voltages     = ARRAY_SIZE(_t),		\
+		.ops		= &tps65023_dcdc_ops,		\
+		.type		= REGULATOR_VOLTAGE,		\
+		.owner		= THIS_MODULE,			\
+		.volt_table	= _t,				\
+		.vsel_reg	= TPS65023_REG_DEF_CORE,	\
+		.vsel_mask	= ARRAY_SIZE(_t) - 1,		\
+		.enable_mask	= _em,				\
+		.enable_reg	= TPS65023_REG_REG_CTRL,	\
+		.apply_reg	= TPS65023_REG_CON_CTRL2,	\
+		.apply_bit	= TPS65023_REG_CTRL2_GO,	\
+	}							\
+
+#define TPS65023_REGULATOR_LDO(_num, _t, _vm)			\
+	{							\
+		.name		= "LDO"#_num,			\
+		.of_match	= of_match_ptr("LDO"#_num),	\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.id		= TPS65023_LDO_##_num,		\
+		.n_voltages     = ARRAY_SIZE(_t),		\
+		.ops		= &tps65023_ldo_ops,		\
+		.type		= REGULATOR_VOLTAGE,		\
+		.owner		= THIS_MODULE,			\
+		.volt_table	= _t,				\
+		.vsel_reg	= TPS65023_REG_LDO_CTRL,	\
+		.vsel_mask	= _vm,				\
+		.enable_mask	= 1 << (_num),			\
+		.enable_reg	= TPS65023_REG_REG_CTRL,	\
+	}							\
+
 /* Supported voltage values for regulators */
 static const unsigned int VCORE_VSEL_table[] = {
 	800000, 825000, 850000, 875000,
@@ -124,25 +160,16 @@ static const unsigned int TPS65023_LDO2_VSEL_table[] = {
 	2500000, 2800000, 3000000, 3300000,
 };
 
-/* Regulator specific details */
-struct tps_info {
-	const char *name;
-	u8 table_len;
-	const unsigned int *table;
-};
-
 /* PMIC details */
 struct tps_pmic {
-	struct regulator_desc desc[TPS65023_NUM_REGULATOR];
 	struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
-	const struct tps_info *info[TPS65023_NUM_REGULATOR];
+	const struct tps_driver_data *driver_data;
 	struct regmap *regmap;
-	u8 core_regulator;
 };
 
 /* Struct passed as driver data */
 struct tps_driver_data {
-	const struct tps_info *info;
+	const struct regulator_desc *desc;
 	u8 core_regulator;
 };
 
@@ -154,7 +181,7 @@ static int tps65023_dcdc_get_voltage_sel(struct regulator_dev *dev)
 	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
 		return -EINVAL;
 
-	if (dcdc != tps->core_regulator)
+	if (dcdc != tps->driver_data->core_regulator)
 		return 0;
 
 	return regulator_get_voltage_sel_regmap(dev);
@@ -166,7 +193,7 @@ static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev,
 	struct tps_pmic *tps = rdev_get_drvdata(dev);
 	int dcdc = rdev_get_id(dev);
 
-	if (dcdc != tps->core_regulator)
+	if (dcdc != tps->driver_data->core_regulator)
 		return -EINVAL;
 
 	return regulator_set_voltage_sel_regmap(dev, selector);
@@ -199,30 +226,60 @@ static const struct regmap_config tps65023_regmap_config = {
 	.val_bits = 8,
 };
 
+static const struct regulator_desc tps65020_regulators[] = {
+	TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20),
+	TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10),
+	TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08),
+	TPS65023_REGULATOR_LDO(1, TPS65020_LDO_VSEL_table, 0x07),
+	TPS65023_REGULATOR_LDO(2, TPS65020_LDO_VSEL_table, 0x70),
+};
+
+static const struct regulator_desc tps65021_regulators[] = {
+	TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20),
+	TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10),
+	TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08),
+	TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07),
+	TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70),
+};
+
+static const struct regulator_desc tps65023_regulators[] = {
+	TPS65023_REGULATOR_DCDC(1, VCORE_VSEL_table, 0x20),
+	TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_3300000_VSEL_table, 0x10),
+	TPS65023_REGULATOR_DCDC(3, DCDC_FIXED_1800000_VSEL_table, 0x08),
+	TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07),
+	TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70),
+};
+
+static struct tps_driver_data tps65020_drv_data = {
+	.desc = tps65020_regulators,
+	.core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65021_drv_data = {
+	.desc = tps65021_regulators,
+	.core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65023_drv_data = {
+	.desc = tps65023_regulators,
+	.core_regulator = TPS65023_DCDC_1,
+};
+
 static int tps_65023_probe(struct i2c_client *client,
 				     const struct i2c_device_id *id)
 {
-	const struct tps_driver_data *drv_data = (void *)id->driver_data;
+	struct regulator_init_data *init_data = dev_get_platdata(&client->dev);
-	const struct tps_info *info = drv_data->info;
 	struct regulator_config config = { };
-	struct regulator_init_data *init_data;
-	struct regulator_dev *rdev;
 	struct tps_pmic *tps;
 	int i;
 	int error;
 
-	/**
-	 * init_data points to array of regulator_init structures
-	 * coming from the board-evm file.
-	 */
-	init_data = dev_get_platdata(&client->dev);
-	if (!init_data)
-		return -EIO;
-
 	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
 	if (!tps)
 		return -ENOMEM;
 
+	tps->driver_data = (struct tps_driver_data *)id->driver_data;
+
 	tps->regmap = devm_regmap_init_i2c(client, &tps65023_regmap_config);
 	if (IS_ERR(tps->regmap)) {
 		error = PTR_ERR(tps->regmap);
@@ -232,58 +289,22 @@ static int tps_65023_probe(struct i2c_client *client,
 	}
 
 	/* common for all regulators */
-	tps->core_regulator = drv_data->core_regulator;
+	config.dev = &client->dev;
+	config.driver_data = tps;
+	config.regmap = tps->regmap;
 
-	for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
+	for (i = 0; i < TPS65023_NUM_REGULATOR; i++) {
-		/* Store regulator specific information */
+		if (init_data)
-		tps->info[i] = info;
+			config.init_data = &init_data[i];
-
-		tps->desc[i].name = info->name;
-		tps->desc[i].id = i;
-		tps->desc[i].n_voltages = info->table_len;
-		tps->desc[i].volt_table = info->table;
-		tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
-					&tps65023_ldo_ops : &tps65023_dcdc_ops);
-		tps->desc[i].type = REGULATOR_VOLTAGE;
-		tps->desc[i].owner = THIS_MODULE;
-
-		tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL;
-		switch (i) {
-		case TPS65023_LDO_1:
-			tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
-			tps->desc[i].vsel_mask = 0x07;
-			tps->desc[i].enable_mask = 1 << 1;
-			break;
-		case TPS65023_LDO_2:
-			tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
-			tps->desc[i].vsel_mask = 0x70;
-			tps->desc[i].enable_mask = 1 << 2;
-			break;
-		default: /* DCDCx */
-			tps->desc[i].enable_mask =
-					1 << (TPS65023_NUM_REGULATOR - i);
-			tps->desc[i].vsel_reg = TPS65023_REG_DEF_CORE;
-			tps->desc[i].vsel_mask = info->table_len - 1;
-			tps->desc[i].apply_reg = TPS65023_REG_CON_CTRL2;
-			tps->desc[i].apply_bit = TPS65023_REG_CTRL2_GO;
-		}
-
-		config.dev = &client->dev;
-		config.init_data = init_data;
-		config.driver_data = tps;
-		config.regmap = tps->regmap;
 
 		/* Register the regulators */
-		rdev = devm_regulator_register(&client->dev, &tps->desc[i],
+		tps->rdev[i] = devm_regulator_register(&client->dev,
-					       &config);
+					&tps->driver_data->desc[i], &config);
-		if (IS_ERR(rdev)) {
+		if (IS_ERR(tps->rdev[i])) {
 			dev_err(&client->dev, "failed to register %s\n",
 				id->name);
-			return PTR_ERR(rdev);
+			return PTR_ERR(tps->rdev[i]);
 		}
-
-		/* Save regulator for cleanup */
-		tps->rdev[i] = rdev;
 	}
 
 	i2c_set_clientdata(client, tps);
@@ -296,120 +317,33 @@ static int tps_65023_probe(struct i2c_client *client,
 	return 0;
 }
 
-static const struct tps_info tps65020_regs[] = {
+static const struct of_device_id tps65023_of_match[] = {
-	{
+	{ .compatible = "ti,tps65020", .data = &tps65020_drv_data},
-		.name = "VDCDC1",
+	{ .compatible = "ti,tps65021", .data = &tps65021_drv_data},
-		.table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
+	{ .compatible = "ti,tps65023", .data = &tps65023_drv_data},
-		.table = DCDC_FIXED_3300000_VSEL_table,
+	{},
-	},
-	{
-		.name = "VDCDC2",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
-		.table = DCDC_FIXED_1800000_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
-		.table = VCORE_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table),
-		.table = TPS65020_LDO_VSEL_table,
-	},
-	{
-		.name = "LDO2",
-		.table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table),
-		.table = TPS65020_LDO_VSEL_table,
-	},
-};
-
-static const struct tps_info tps65021_regs[] = {
-	{
-		.name = "VDCDC1",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
-		.table = DCDC_FIXED_3300000_VSEL_table,
-	},
-	{
-		.name = "VDCDC2",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
-		.table = DCDC_FIXED_1800000_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
-		.table = VCORE_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
-		.table = TPS65023_LDO1_VSEL_table,
-	},
-	{
-		.name = "LDO2",
-		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
-		.table = TPS65023_LDO2_VSEL_table,
-	},
-};
-
-static const struct tps_info tps65023_regs[] = {
-	{
-		.name = "VDCDC1",
-		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
-		.table = VCORE_VSEL_table,
-	},
-	{
-		.name = "VDCDC2",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
-		.table = DCDC_FIXED_3300000_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
-		.table = DCDC_FIXED_1800000_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
-		.table = TPS65023_LDO1_VSEL_table,
-	},
-	{
-		.name = "LDO2",
-		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
-		.table = TPS65023_LDO2_VSEL_table,
-	},
-};
-
-static struct tps_driver_data tps65020_drv_data = {
-	.info = tps65020_regs,
-	.core_regulator = TPS65023_DCDC_3,
-};
-
-static struct tps_driver_data tps65021_drv_data = {
-	.info = tps65021_regs,
-	.core_regulator = TPS65023_DCDC_3,
-};
-
-static struct tps_driver_data tps65023_drv_data = {
-	.info = tps65023_regs,
-	.core_regulator = TPS65023_DCDC_1,
 };
+MODULE_DEVICE_TABLE(of, tps65023_of_match);
 
 static const struct i2c_device_id tps_65023_id[] = {
-	{.name = "tps65023",
+	{
-	.driver_data = (unsigned long) &tps65023_drv_data},
+		.name = "tps65023",
-	{.name = "tps65021",
+		.driver_data = (kernel_ulong_t)&tps65023_drv_data
-	.driver_data = (unsigned long) &tps65021_drv_data,},
+	}, {
-	{.name = "tps65020",
+		.name = "tps65021",
-	.driver_data = (unsigned long) &tps65020_drv_data},
+		.driver_data = (kernel_ulong_t)&tps65021_drv_data
+	}, {
+		.name = "tps65020",
+		.driver_data = (kernel_ulong_t)&tps65020_drv_data
+	},
 	{ },
 };
-
 MODULE_DEVICE_TABLE(i2c, tps_65023_id);
 
 static struct i2c_driver tps_65023_i2c_driver = {
 	.driver = {
 		.name = "tps65023",
+		.of_match_table = of_match_ptr(tps65023_of_match),
 	},
 	.probe = tps_65023_probe,
 	.id_table = tps_65023_id,

include/linux/mfd/tps6105x.h

@@ -10,6 +10,7 @@
 #define MFD_TPS6105X_H
 
 #include <linux/i2c.h>
+#include <linux/regmap.h>
 #include <linux/regulator/machine.h>
 
 /*
@@ -82,20 +83,15 @@ struct tps6105x_platform_data {
 
 /**
  * struct tps6105x - state holder for the TPS6105x drivers
- * @mutex: mutex to serialize I2C accesses
  * @i2c_client: corresponding I2C client
  * @regulator: regulator device if used in voltage mode
+ * @regmap: used for i2c communcation on accessing registers
  */
 struct tps6105x {
 	struct tps6105x_platform_data *pdata;
-	struct mutex		lock;
 	struct i2c_client	*client;
 	struct regulator_dev	*regulator;
+	struct regmap		*regmap;
 };
 
-extern int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value);
-extern int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf);
-extern int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
-				 u8 bitmask, u8 bitvalues);
-
 #endif

include/linux/regulator/driver.h

@@ -245,6 +245,7 @@ enum regulator_type {
  * @linear_min_sel: Minimal selector for starting linear mapping
  * @fixed_uV: Fixed voltage of rails.
  * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @min_dropout_uV: The minimum dropout voltage this regulator can handle
  * @linear_ranges: A constant table of possible voltage ranges.
  * @n_linear_ranges: Number of entries in the @linear_ranges table.
  * @volt_table: Voltage mapping table (if table based mapping)
@@ -292,6 +293,7 @@ struct regulator_desc {
 	unsigned int linear_min_sel;
 	int fixed_uV;
 	unsigned int ramp_delay;
+	int min_dropout_uV;
 
 	const struct regulator_linear_range *linear_ranges;
 	int n_linear_ranges;