microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Update extcon for v3.14 

This patchset add new driver of extcon-max14577.c which detect various external
 connector and fix minor issue of extcon provider driver(extcon-arizona/palams/
 gpio.c). Also, update documentation of previous 'switch' porting guide and
 extcon git repository url.
 
 Detailed description for patchset:
 - New driver of extcon-max14577.c
 : Add extcon-max14577.c drvier to support Maxim MUIC(Micro USB Interface
 Controller) which detect USB/TA/JIG/AUDIO-DOCK and additional accessory
 according to each resistance when connected external connector.
 
 - extcon-arizoan.c driver
 : Code clean to use define macro instead of hex value
 : Fix minor issue to reset back to our staring state
 : Fix race with microphone detection and removal
 
 - extcon-palmas.c driver
 : Fix minor issue and renaming compatible string of Devicetree
 
 - extcon-gpio.c driver
 : Fix bug about ordering initialization of gpio pin on probe()
 : Send uevent after wakeup from suspend state because some SoC
   haven't wakeup interrupt on suspend state.
 
 - Documentation (Documentation/extcon/porting-android-switch-class)
 : Fix switch class porting guide
 
 - Update extcon git repository url
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSzf6VAAoJEJzN3yze689TDIwP/jm0WO9sQtjJ1wK1mCIohoZQ
 cS1VquRbMtDLXM7ffg+4VevHbt7mfibh9n97kJGLwz9qHc2+5vtfkrGktybVSI/3
 dnMNWnx77SIx6GDBEAaCfpPnGqY9KKALQKKZbBSVJtty0eN3VZC2m5sTruah9chj
 Az6i4tOATHQi5yahf0mxdnVu7oXmga1nkb55dcm0t0q+zxPLkuQzFwf/69fQdTol
 ybrT3bH55qX38QOTvov6B5YQT/xLC4BnOlHozMViFBV5mrvm0KCcC8LPP4DsdxkX
 3YCjcGHmybKFByqVzMqnD3+LNJq8nAzhWMa5qVzSLBLPuJDegw0Wjdq270DtZRoB
 XBVcsAhfy7uUrYMFWdDyG98yBu5UTPI1dDMAzAZnNZQLcnJQInfkfCu2jARRcCGp
 +VsozcFCLx8wnGwOPTPv0LxGxAFTxQscIVyTWPKR2i1z3pxVshtpAC6RUO9RFZg8
 NlkeeqmRdGKkZi/o9peifRKqBJTVCzapttxr6FCRLuTXq9x0f8mfkygnRUeg0tSv
 RAMkXRyCvVpIwiVVHbx0EVwr2znr416BvwZZu3DUrUWRi2WT6m0PdP/pqyVV7d78
 HMoKAmFE2Q7Yjyo3PzdQTbirEJ3OtsKODvGGHq5qqhlBq5eBUpnWlVRkIoNFcQ+8
 2+kR3h+peUQVGFWWXqam
 =eIUL
 -----END PGP SIGNATURE-----

Merge tag 'extcon-next-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for v3.14

This patchset add new driver of extcon-max14577.c which detect various external
connector and fix minor issue of extcon provider driver(extcon-arizona/palams/
gpio.c). Also, update documentation of previous 'switch' porting guide and
extcon git repository url.

Detailed description for patchset:
- New driver of extcon-max14577.c
: Add extcon-max14577.c drvier to support Maxim MUIC(Micro USB Interface
Controller) which detect USB/TA/JIG/AUDIO-DOCK and additional accessory
according to each resistance when connected external connector.

- extcon-arizoan.c driver
: Code clean to use define macro instead of hex value
: Fix minor issue to reset back to our staring state
: Fix race with microphone detection and removal

- extcon-palmas.c driver
: Fix minor issue and renaming compatible string of Devicetree

- extcon-gpio.c driver
: Fix bug about ordering initialization of gpio pin on probe()
: Send uevent after wakeup from suspend state because some SoC
  haven't wakeup interrupt on suspend state.

- Documentation (Documentation/extcon/porting-android-switch-class)
: Fix switch class porting guide

- Update extcon git repository url
This commit is contained in:
Greg Kroah-Hartman 2014-01-08 20:14:19 -08:00
Родитель 19c055738b 6544dfa579
Коммит 52cb6a205c
11 изменённых файлов: 876 добавлений и 35 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

6
Documentation/devicetree/bindings/extcon/extcon-palmas.txt
Просмотреть файл

@ -2,7 +2,11 @@ EXTCON FOR PALMAS/TWL CHIPS
PALMAS USB COMPARATOR
Required Properties:
- compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb"
- compatible: should contain one of:
* "ti,palmas-usb-vid".
* "ti,twl6035-usb-vid".
* "ti,palmas-usb" (DEPRECATED - use "ti,palmas-usb-vid").
* "ti,twl6035-usb" (DEPRECATED - use "ti,twl6035-usb-vid").
Optional Properties:
- ti,wakeup : To enable the wakeup comparator in probe

9
Documentation/extcon/porting-android-switch-class
Просмотреть файл

@ -50,7 +50,7 @@ so that they are still compatible with legacy userspace processes.
Extcon's extended features for switch device drivers with
complex features usually required magic numbers in state
value of switch_dev. With extcon, such magic numbers that
support multiple cables (
support multiple cables are no more required or supported.
1. Define cable names at edev->supported_cable.
2. (Recommended) remove print_state callback.
@ -114,11 +114,8 @@ exclusive, the two cables cannot be in ATTACHED state simulteneously.
****** ABI Location
If "CONFIG_ANDROID" is enabled and "CONFIG_ANDROID_SWITCH" is
disabled, /sys/class/switch/* are created as symbolic links to
/sys/class/extcon/*. Because CONFIG_ANDROID_SWITCH creates
/sys/class/switch directory, we disable symboling linking if
CONFIG_ANDROID_SWITCH is enabled.
If "CONFIG_ANDROID" is enabled, /sys/class/switch/* are created
as symbolic links to /sys/class/extcon/*.
The two files of switch class, name and state, are provided with
extcon, too. When the multistate support (STEP 2 of CHAPTER 1.) is

1
MAINTAINERS
Просмотреть файл

@ -3330,6 +3330,7 @@ EXTERNAL CONNECTOR SUBSYSTEM (EXTCON)
M: MyungJoo Ham <myungjoo.ham@samsung.com>
M: Chanwoo Choi <cw00.choi@samsung.com>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git
S: Maintained
F: drivers/extcon/
F: Documentation/extcon/

10
drivers/extcon/Kconfig
Просмотреть файл

@ -31,6 +31,16 @@ config EXTCON_ADC_JACK
help
Say Y here to enable extcon device driver based on ADC values.
config EXTCON_MAX14577
tristate "MAX14577 EXTCON Support"
depends on MFD_MAX14577
select IRQ_DOMAIN
select REGMAP_I2C
help
If you say yes here you get support for the MUIC device of
Maxim MAX14577 PMIC. The MAX14577 MUIC is a USB port accessory
detector and switch.
config EXTCON_MAX77693
tristate "MAX77693 EXTCON Support"
depends on MFD_MAX77693 && INPUT

1
drivers/extcon/Makefile
Просмотреть файл

@ -7,6 +7,7 @@ obj-$(CONFIG_OF_EXTCON) += of_extcon.o
obj-$(CONFIG_EXTCON) += extcon-class.o
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o

73
drivers/extcon/extcon-arizona.c
Просмотреть файл

@ -44,6 +44,15 @@
#define HPDET_DEBOUNCE 500
#define DEFAULT_MICD_TIMEOUT 2000
#define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \
ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \
ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \
ARIZONA_MICD_LVL_7)
#define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7)
#define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8)
struct arizona_extcon_info {
struct device *dev;
struct arizona *arizona;
@ -426,26 +435,15 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
}
val &= ARIZONA_HP_LVL_B_MASK;
/* Convert to ohms, the value is in 0.5 ohm increments */
val /= 2;
regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
&range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
/* Skip up or down a range? */
if (range && (val < arizona_hpdet_c_ranges[range].min)) {
range--;
dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
arizona_hpdet_c_ranges[range].min,
arizona_hpdet_c_ranges[range].max);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
/* Skip up a range, or report? */
if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
(val >= arizona_hpdet_c_ranges[range].max)) {
range++;
@ -459,6 +457,12 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
if (range && (val < arizona_hpdet_c_ranges[range].min)) {
dev_dbg(arizona->dev, "Reporting range boundary %d\n",
arizona_hpdet_c_ranges[range].min);
val = arizona_hpdet_c_ranges[range].min;
}
}
dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
@ -594,9 +598,15 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
dev_err(arizona->dev, "Failed to report HP/line: %d\n",
ret);
done:
/* Reset back to starting range */
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
0);
arizona_extcon_do_magic(info, 0);
done:
if (id_gpio)
gpio_set_value_cansleep(id_gpio, 0);
@ -765,7 +775,20 @@ static void arizona_micd_detect(struct work_struct *work)
mutex_lock(&info->lock);
for (i = 0; i < 10 && !(val & 0x7fc); i++) {
/* If the cable was removed while measuring ignore the result */
ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
mutex_unlock(&info->lock);
return;
} else if (!ret) {
dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n");
mutex_unlock(&info->lock);
return;
}
for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) {
ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
if (ret != 0) {
dev_err(arizona->dev,
@ -784,7 +807,7 @@ static void arizona_micd_detect(struct work_struct *work)
}
}
if (i == 10 && !(val & 0x7fc)) {
if (i == 10 && !(val & MICD_LVL_0_TO_8)) {
dev_err(arizona->dev, "Failed to get valid MICDET value\n");
mutex_unlock(&info->lock);
return;
@ -798,7 +821,7 @@ static void arizona_micd_detect(struct work_struct *work)
}
/* If we got a high impedence we should have a headset, report it. */
if (info->detecting && (val & 0x400)) {
if (info->detecting && (val & ARIZONA_MICD_LVL_8)) {
arizona_identify_headphone(info);
ret = extcon_update_state(&info->edev,
@ -827,7 +850,7 @@ static void arizona_micd_detect(struct work_struct *work)
* plain headphones. If both polarities report a low
* impedence then give up and report headphones.
*/
if (info->detecting && (val & 0x3f8)) {
if (info->detecting && (val & MICD_LVL_1_TO_7)) {
if (info->jack_flips >= info->micd_num_modes * 10) {
dev_dbg(arizona->dev, "Detected HP/line\n");
arizona_identify_headphone(info);
@ -851,7 +874,7 @@ static void arizona_micd_detect(struct work_struct *work)
* If we're still detecting and we detect a short then we've
* got a headphone. Otherwise it's a button press.
*/
if (val & 0x3fc) {
if (val & MICD_LVL_0_TO_7) {
if (info->mic) {
dev_dbg(arizona->dev, "Mic button detected\n");
@ -1126,6 +1149,16 @@ static int arizona_extcon_probe(struct platform_device *pdev)
break;
}
break;
case WM5110:
switch (arizona->rev) {
case 0 ... 2:
break;
default:
info->micd_clamp = true;
info->hpdet_ip = 2;
break;
}
break;
default:
break;
}

32
drivers/extcon/extcon-gpio.c
Просмотреть файл

@ -40,6 +40,7 @@ struct gpio_extcon_data {
int irq;
struct delayed_work work;
unsigned long debounce_jiffies;
bool check_on_resume;
};
static void gpio_extcon_work(struct work_struct *work)
@ -103,8 +104,15 @@ static int gpio_extcon_probe(struct platform_device *pdev)
extcon_data->gpio_active_low = pdata->gpio_active_low;
extcon_data->state_on = pdata->state_on;
extcon_data->state_off = pdata->state_off;
extcon_data->check_on_resume = pdata->check_on_resume;
if (pdata->state_on && pdata->state_off)
extcon_data->edev.print_state = extcon_gpio_print_state;
ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
pdev->name);
if (ret < 0)
return ret;
if (pdata->debounce) {
ret = gpio_set_debounce(extcon_data->gpio,
pdata->debounce * 1000);
@ -117,11 +125,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
pdev->name);
if (ret < 0)
goto err;
INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
extcon_data->irq = gpio_to_irq(extcon_data->gpio);
@ -159,12 +162,31 @@ static int gpio_extcon_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int gpio_extcon_resume(struct device *dev)
{
struct gpio_extcon_data *extcon_data;
extcon_data = dev_get_drvdata(dev);
if (extcon_data->check_on_resume)
queue_delayed_work(system_power_efficient_wq,
&extcon_data->work, extcon_data->debounce_jiffies);
return 0;
}
#endif
static const struct dev_pm_ops gpio_extcon_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume)
};
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
.remove = gpio_extcon_remove,
.driver = {
.name = "extcon-gpio",
.owner = THIS_MODULE,
.pm = &gpio_extcon_pm_ops,
},
};

752
drivers/extcon/extcon-max14577.c Normal file
Просмотреть файл

@ -0,0 +1,752 @@
/*
* extcon-max14577.c - MAX14577 extcon driver to support MAX14577 MUIC
*
* Copyright (C) 2013 Samsung Electrnoics
* Chanwoo Choi <cw00.choi@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/mfd/max14577.h>
#include <linux/mfd/max14577-private.h>
#include <linux/extcon.h>
#define DEV_NAME "max14577-muic"
#define DELAY_MS_DEFAULT 17000 /* unit: millisecond */
enum max14577_muic_adc_debounce_time {
ADC_DEBOUNCE_TIME_5MS = 0,
ADC_DEBOUNCE_TIME_10MS,
ADC_DEBOUNCE_TIME_25MS,
ADC_DEBOUNCE_TIME_38_62MS,
};
enum max14577_muic_status {
MAX14577_MUIC_STATUS1 = 0,
MAX14577_MUIC_STATUS2 = 1,
MAX14577_MUIC_STATUS_END,
};
struct max14577_muic_info {
struct device *dev;
struct max14577 *max14577;
struct extcon_dev *edev;
int prev_cable_type;
int prev_chg_type;
u8 status[MAX14577_MUIC_STATUS_END];
bool irq_adc;
bool irq_chg;
struct work_struct irq_work;
struct mutex mutex;
/*
* Use delayed workqueue to detect cable state and then
* notify cable state to notifiee/platform through uevent.
* After completing the booting of platform, the extcon provider
* driver should notify cable state to upper layer.
*/
struct delayed_work wq_detcable;
/*
* Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
* h/w path of COMP2/COMN1 on CONTROL1 register.
*/
int path_usb;
int path_uart;
};
enum max14577_muic_cable_group {
MAX14577_CABLE_GROUP_ADC = 0,
MAX14577_CABLE_GROUP_CHG,
};
/**
* struct max14577_muic_irq
* @irq: the index of irq list of MUIC device.
* @name: the name of irq.
* @virq: the virtual irq to use irq domain
*/
struct max14577_muic_irq {
unsigned int irq;
const char *name;
unsigned int virq;
};
static struct max14577_muic_irq muic_irqs[] = {
{ MAX14577_IRQ_INT1_ADC, "muic-ADC" },
{ MAX14577_IRQ_INT1_ADCLOW, "muic-ADCLOW" },
{ MAX14577_IRQ_INT1_ADCERR, "muic-ADCError" },
{ MAX14577_IRQ_INT2_CHGTYP, "muic-CHGTYP" },
{ MAX14577_IRQ_INT2_CHGDETRUN, "muic-CHGDETRUN" },
{ MAX14577_IRQ_INT2_DCDTMR, "muic-DCDTMR" },
{ MAX14577_IRQ_INT2_DBCHG, "muic-DBCHG" },
{ MAX14577_IRQ_INT2_VBVOLT, "muic-VBVOLT" },
};
/* Define supported accessory type */
enum max14577_muic_acc_type {
MAX14577_MUIC_ADC_GROUND = 0x0,
MAX14577_MUIC_ADC_SEND_END_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S1_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S2_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S3_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S4_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S5_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S6_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S7_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S8_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S9_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S10_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S11_BUTTON,
MAX14577_MUIC_ADC_REMOTE_S12_BUTTON,
MAX14577_MUIC_ADC_RESERVED_ACC_1,
MAX14577_MUIC_ADC_RESERVED_ACC_2,
MAX14577_MUIC_ADC_RESERVED_ACC_3,
MAX14577_MUIC_ADC_RESERVED_ACC_4,
MAX14577_MUIC_ADC_RESERVED_ACC_5,
MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2,
MAX14577_MUIC_ADC_PHONE_POWERED_DEV,
MAX14577_MUIC_ADC_TTY_CONVERTER,
MAX14577_MUIC_ADC_UART_CABLE,
MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG,
MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF,
MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON,
MAX14577_MUIC_ADC_AV_CABLE_NOLOAD,
MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG,
MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF,
MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON,
MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1, /* with Remote and Simple Ctrl */
MAX14577_MUIC_ADC_OPEN,
};
/* max14577 MUIC device support below list of accessories(external connector) */
enum {
EXTCON_CABLE_USB = 0,
EXTCON_CABLE_TA,
EXTCON_CABLE_FAST_CHARGER,
EXTCON_CABLE_SLOW_CHARGER,
EXTCON_CABLE_CHARGE_DOWNSTREAM,
EXTCON_CABLE_JIG_USB_ON,
EXTCON_CABLE_JIG_USB_OFF,
EXTCON_CABLE_JIG_UART_OFF,
EXTCON_CABLE_JIG_UART_ON,
_EXTCON_CABLE_NUM,
};
static const char *max14577_extcon_cable[] = {
[EXTCON_CABLE_USB] = "USB",
[EXTCON_CABLE_TA] = "TA",
[EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
[EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
[EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
[EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
[EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
[EXTCON_CABLE_JIG_UART_ON] = "JIG-UART-ON",
NULL,
};
/*
* max14577_muic_set_debounce_time - Set the debounce time of ADC
* @info: the instance including private data of max14577 MUIC
* @time: the debounce time of ADC
*/
static int max14577_muic_set_debounce_time(struct max14577_muic_info *info,
enum max14577_muic_adc_debounce_time time)
{
u8 ret;
switch (time) {
case ADC_DEBOUNCE_TIME_5MS:
case ADC_DEBOUNCE_TIME_10MS:
case ADC_DEBOUNCE_TIME_25MS:
case ADC_DEBOUNCE_TIME_38_62MS:
ret = max14577_update_reg(info->max14577->regmap,
MAX14577_MUIC_REG_CONTROL3,
CTRL3_ADCDBSET_MASK,
time << CTRL3_ADCDBSET_SHIFT);
if (ret) {
dev_err(info->dev, "failed to set ADC debounce time\n");
return ret;
}
break;
default:
dev_err(info->dev, "invalid ADC debounce time\n");
return -EINVAL;
}
return 0;
};
/*
* max14577_muic_set_path - Set hardware line according to attached cable
* @info: the instance including private data of max14577 MUIC
* @value: the path according to attached cable
* @attached: the state of cable (true:attached, false:detached)
*
* The max14577 MUIC device share outside H/W line among a varity of cables
* so, this function set internal path of H/W line according to the type of
* attached cable.
*/
static int max14577_muic_set_path(struct max14577_muic_info *info,
u8 val, bool attached)
{
int ret = 0;
u8 ctrl1, ctrl2 = 0;
/* Set open state to path before changing hw path */
ret = max14577_update_reg(info->max14577->regmap,
MAX14577_MUIC_REG_CONTROL1,
CLEAR_IDBEN_MICEN_MASK, CTRL1_SW_OPEN);
if (ret < 0) {
dev_err(info->dev, "failed to update MUIC register\n");
return ret;
}
if (attached)
ctrl1 = val;
else
ctrl1 = CTRL1_SW_OPEN;
ret = max14577_update_reg(info->max14577->regmap,
MAX14577_MUIC_REG_CONTROL1,
CLEAR_IDBEN_MICEN_MASK, ctrl1);
if (ret < 0) {
dev_err(info->dev, "failed to update MUIC register\n");
return ret;
}
if (attached)
ctrl2 |= CTRL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
else
ctrl2 |= CTRL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
ret = max14577_update_reg(info->max14577->regmap,
MAX14577_REG_CONTROL2,
CTRL2_LOWPWR_MASK | CTRL2_CPEN_MASK, ctrl2);
if (ret < 0) {
dev_err(info->dev, "failed to update MUIC register\n");
return ret;
}
dev_dbg(info->dev,
"CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
ctrl1, ctrl2, attached ? "attached" : "detached");
return 0;
}
/*
* max14577_muic_get_cable_type - Return cable type and check cable state
* @info: the instance including private data of max14577 MUIC
* @group: the path according to attached cable
* @attached: store cable state and return
*
* This function check the cable state either attached or detached,
* and then divide precise type of cable according to cable group.
* - max14577_CABLE_GROUP_ADC
* - max14577_CABLE_GROUP_CHG
*/
static int max14577_muic_get_cable_type(struct max14577_muic_info *info,
enum max14577_muic_cable_group group, bool *attached)
{
int cable_type = 0;
int adc;
int chg_type;
switch (group) {
case MAX14577_CABLE_GROUP_ADC:
/*
* Read ADC value to check cable type and decide cable state
* according to cable type
*/
adc = info->status[MAX14577_MUIC_STATUS1] & STATUS1_ADC_MASK;
adc >>= STATUS1_ADC_SHIFT;
/*
* Check current cable state/cable type and store cable type
* (info->prev_cable_type) for handling cable when cable is
* detached.
*/
if (adc == MAX14577_MUIC_ADC_OPEN) {
*attached = false;
cable_type = info->prev_cable_type;
info->prev_cable_type = MAX14577_MUIC_ADC_OPEN;
} else {
*attached = true;
cable_type = info->prev_cable_type = adc;
}
break;
case MAX14577_CABLE_GROUP_CHG:
/*
* Read charger type to check cable type and decide cable state
* according to type of charger cable.
*/
chg_type = info->status[MAX14577_MUIC_STATUS2] &
STATUS2_CHGTYP_MASK;
chg_type >>= STATUS2_CHGTYP_SHIFT;
if (chg_type == MAX14577_CHARGER_TYPE_NONE) {
*attached = false;
cable_type = info->prev_chg_type;
info->prev_chg_type = MAX14577_CHARGER_TYPE_NONE;
} else {
*attached = true;
/*
* Check current cable state/cable type and store cable
* type(info->prev_chg_type) for handling cable when
* charger cable is detached.
*/
cable_type = info->prev_chg_type = chg_type;
}
break;
default:
dev_err(info->dev, "Unknown cable group (%d)\n", group);
cable_type = -EINVAL;
break;
}
return cable_type;
}
static int max14577_muic_jig_handler(struct max14577_muic_info *info,
int cable_type, bool attached)
{
char cable_name[32];
int ret = 0;
u8 path = CTRL1_SW_OPEN;
dev_dbg(info->dev,
"external connector is %s (adc:0x%02x)\n",
attached ? "attached" : "detached", cable_type);
switch (cable_type) {
case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */
/* PATH:AP_USB */
strcpy(cable_name, "JIG-USB-OFF");
path = CTRL1_SW_USB;
break;
case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */
/* PATH:AP_USB */
strcpy(cable_name, "JIG-USB-ON");
path = CTRL1_SW_USB;
break;
case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */
/* PATH:AP_UART */
strcpy(cable_name, "JIG-UART-OFF");
path = CTRL1_SW_UART;
break;
default:
dev_err(info->dev, "failed to detect %s jig cable\n",
attached ? "attached" : "detached");
return -EINVAL;
}
ret = max14577_muic_set_path(info, path, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, cable_name, attached);
return 0;
}
static int max14577_muic_adc_handler(struct max14577_muic_info *info)
{
int cable_type;
bool attached;
int ret = 0;
/* Check accessory state which is either detached or attached */
cable_type = max14577_muic_get_cable_type(info,
MAX14577_CABLE_GROUP_ADC, &attached);
dev_dbg(info->dev,
"external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
attached ? "attached" : "detached", cable_type,
info->prev_cable_type);
switch (cable_type) {
case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF:
case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON:
case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF:
/* JIG */
ret = max14577_muic_jig_handler(info, cable_type, attached);
if (ret < 0)
return ret;
break;
case MAX14577_MUIC_ADC_GROUND:
case MAX14577_MUIC_ADC_SEND_END_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S1_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S2_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S3_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S4_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S5_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S6_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S7_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S8_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S9_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S10_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S11_BUTTON:
case MAX14577_MUIC_ADC_REMOTE_S12_BUTTON:
case MAX14577_MUIC_ADC_RESERVED_ACC_1:
case MAX14577_MUIC_ADC_RESERVED_ACC_2:
case MAX14577_MUIC_ADC_RESERVED_ACC_3:
case MAX14577_MUIC_ADC_RESERVED_ACC_4:
case MAX14577_MUIC_ADC_RESERVED_ACC_5:
case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2:
case MAX14577_MUIC_ADC_PHONE_POWERED_DEV:
case MAX14577_MUIC_ADC_TTY_CONVERTER:
case MAX14577_MUIC_ADC_UART_CABLE:
case MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG:
case MAX14577_MUIC_ADC_AV_CABLE_NOLOAD:
case MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG:
case MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON:
case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1:
/*
* This accessory isn't used in general case if it is specially
* needed to detect additional accessory, should implement
* proper operation when this accessory is attached/detached.
*/
dev_info(info->dev,
"accessory is %s but it isn't used (adc:0x%x)\n",
attached ? "attached" : "detached", cable_type);
return -EAGAIN;
default:
dev_err(info->dev,
"failed to detect %s accessory (adc:0x%x)\n",
attached ? "attached" : "detached", cable_type);
return -EINVAL;
}
return 0;
}
static int max14577_muic_chg_handler(struct max14577_muic_info *info)
{
int chg_type;
bool attached;
int ret = 0;
chg_type = max14577_muic_get_cable_type(info,
MAX14577_CABLE_GROUP_CHG, &attached);
dev_dbg(info->dev,
"external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
attached ? "attached" : "detached",
chg_type, info->prev_chg_type);
switch (chg_type) {
case MAX14577_CHARGER_TYPE_USB:
/* PATH:AP_USB */
ret = max14577_muic_set_path(info, info->path_usb, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "USB", attached);
break;
case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
extcon_set_cable_state(info->edev, "TA", attached);
break;
case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
extcon_set_cable_state(info->edev,
"Charge-downstream", attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
extcon_set_cable_state(info->edev, "Slow-charger", attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_1A:
extcon_set_cable_state(info->edev, "Fast-charger", attached);
break;
case MAX14577_CHARGER_TYPE_NONE:
case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
break;
default:
dev_err(info->dev,
"failed to detect %s accessory (chg_type:0x%x)\n",
attached ? "attached" : "detached", chg_type);
return -EINVAL;
}
return 0;
}
static void max14577_muic_irq_work(struct work_struct *work)
{
struct max14577_muic_info *info = container_of(work,
struct max14577_muic_info, irq_work);
int ret = 0;
if (!info->edev)
return;
mutex_lock(&info->mutex);
ret = max14577_bulk_read(info->max14577->regmap,
MAX14577_MUIC_REG_STATUS1, info->status, 2);
if (ret) {
dev_err(info->dev, "failed to read MUIC register\n");
mutex_unlock(&info->mutex);
return;
}
if (info->irq_adc) {
ret = max14577_muic_adc_handler(info);
info->irq_adc = false;
}
if (info->irq_chg) {
ret = max14577_muic_chg_handler(info);
info->irq_chg = false;
}
if (ret < 0)
dev_err(info->dev, "failed to handle MUIC interrupt\n");
mutex_unlock(&info->mutex);
return;
}
static irqreturn_t max14577_muic_irq_handler(int irq, void *data)
{
struct max14577_muic_info *info = data;
int i, irq_type = -1;
/*
* We may be called multiple times for different nested IRQ-s.
* Including changes in INT1_ADC and INT2_CGHTYP at once.
* However we only need to know whether it was ADC, charger
* or both interrupts so decode IRQ and turn on proper flags.
*/
for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
if (irq == muic_irqs[i].virq)
irq_type = muic_irqs[i].irq;
switch (irq_type) {
case MAX14577_IRQ_INT1_ADC:
case MAX14577_IRQ_INT1_ADCLOW:
case MAX14577_IRQ_INT1_ADCERR:
/* Handle all of accessory except for
type of charger accessory */
info->irq_adc = true;
break;
case MAX14577_IRQ_INT2_CHGTYP:
case MAX14577_IRQ_INT2_CHGDETRUN:
case MAX14577_IRQ_INT2_DCDTMR:
case MAX14577_IRQ_INT2_DBCHG:
case MAX14577_IRQ_INT2_VBVOLT:
/* Handle charger accessory */
info->irq_chg = true;
break;
default:
dev_err(info->dev, "muic interrupt: irq %d occurred, skipped\n",
irq_type);
return IRQ_HANDLED;
}
schedule_work(&info->irq_work);
return IRQ_HANDLED;
}
static int max14577_muic_detect_accessory(struct max14577_muic_info *info)
{
int ret = 0;
int adc;
int chg_type;
bool attached;
mutex_lock(&info->mutex);
/* Read STATUSx register to detect accessory */
ret = max14577_bulk_read(info->max14577->regmap,
MAX14577_MUIC_REG_STATUS1, info->status, 2);
if (ret) {
dev_err(info->dev, "failed to read MUIC register\n");
mutex_unlock(&info->mutex);
return ret;
}
adc = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_ADC,
&attached);
if (attached && adc != MAX14577_MUIC_ADC_OPEN) {
ret = max14577_muic_adc_handler(info);
if (ret < 0) {
dev_err(info->dev, "Cannot detect accessory\n");
mutex_unlock(&info->mutex);
return ret;
}
}
chg_type = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_CHG,
&attached);
if (attached && chg_type != MAX14577_CHARGER_TYPE_NONE) {
ret = max14577_muic_chg_handler(info);
if (ret < 0) {
dev_err(info->dev, "Cannot detect charger accessory\n");
mutex_unlock(&info->mutex);
return ret;
}
}
mutex_unlock(&info->mutex);
return 0;
}
static void max14577_muic_detect_cable_wq(struct work_struct *work)
{
struct max14577_muic_info *info = container_of(to_delayed_work(work),
struct max14577_muic_info, wq_detcable);
max14577_muic_detect_accessory(info);
}
static int max14577_muic_probe(struct platform_device *pdev)
{
struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
struct max14577_muic_info *info;
int delay_jiffies;
int ret;
int i;
u8 id;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "failed to allocate memory\n");
return -ENOMEM;
}
info->dev = &pdev->dev;
info->max14577 = max14577;
platform_set_drvdata(pdev, info);
mutex_init(&info->mutex);
INIT_WORK(&info->irq_work, max14577_muic_irq_work);
/* Support irq domain for max14577 MUIC device */
for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) {
struct max14577_muic_irq *muic_irq = &muic_irqs[i];
unsigned int virq = 0;
virq = regmap_irq_get_virq(max14577->irq_data, muic_irq->irq);
if (!virq)
return -EINVAL;
muic_irq->virq = virq;
ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
max14577_muic_irq_handler,
IRQF_NO_SUSPEND,
muic_irq->name, info);
if (ret) {
dev_err(&pdev->dev,
"failed: irq request (IRQ: %d,"
" error :%d)\n",
muic_irq->irq, ret);
return ret;
}
}
/* Initialize extcon device */
info->edev = devm_kzalloc(&pdev->dev, sizeof(*info->edev), GFP_KERNEL);
if (!info->edev) {
dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
return -ENOMEM;
}
info->edev->name = DEV_NAME;
info->edev->supported_cable = max14577_extcon_cable;
ret = extcon_dev_register(info->edev);
if (ret) {
dev_err(&pdev->dev, "failed to register extcon device\n");
return ret;
}
/* Default h/w line path */
info->path_usb = CTRL1_SW_USB;
info->path_uart = CTRL1_SW_UART;
delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
/* Set initial path for UART */
max14577_muic_set_path(info, info->path_uart, true);
/* Check revision number of MUIC device*/
ret = max14577_read_reg(info->max14577->regmap,
MAX14577_REG_DEVICEID, &id);
if (ret < 0) {
dev_err(&pdev->dev, "failed to read revision number\n");
goto err_extcon;
}
dev_info(info->dev, "device ID : 0x%x\n", id);
/* Set ADC debounce time */
max14577_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
/*
* Detect accessory after completing the initialization of platform
*
* - Use delayed workqueue to detect cable state and then
* notify cable state to notifiee/platform through uevent.
* After completing the booting of platform, the extcon provider
* driver should notify cable state to upper layer.
*/
INIT_DELAYED_WORK(&info->wq_detcable, max14577_muic_detect_cable_wq);
ret = queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
delay_jiffies);
if (ret < 0) {
dev_err(&pdev->dev,
"failed to schedule delayed work for cable detect\n");
goto err_extcon;
}
return ret;
err_extcon:
extcon_dev_unregister(info->edev);
return ret;
}
static int max14577_muic_remove(struct platform_device *pdev)
{
struct max14577_muic_info *info = platform_get_drvdata(pdev);
cancel_work_sync(&info->irq_work);
extcon_dev_unregister(info->edev);
return 0;
}
static struct platform_driver max14577_muic_driver = {
.driver = {
.name = DEV_NAME,
.owner = THIS_MODULE,
},
.probe = max14577_muic_probe,
.remove = max14577_muic_remove,
};
module_platform_driver(max14577_muic_driver);
MODULE_DESCRIPTION("MAXIM 14577 Extcon driver");
MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:extcon-max14577");

17
drivers/extcon/extcon-palmas.c
Просмотреть файл

@ -78,20 +78,24 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
{
unsigned int set;
unsigned int set, id_src;
struct palmas_usb *palmas_usb = _palmas_usb;
palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_SET, &set);
palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_SRC, &id_src);
if (set & PALMAS_USB_ID_INT_SRC_ID_GND) {
if ((set & PALMAS_USB_ID_INT_SRC_ID_GND) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
} else if (set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) {
} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
@ -103,6 +107,11 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
}
return IRQ_HANDLED;
@ -269,7 +278,9 @@ static const struct dev_pm_ops palmas_pm_ops = {
static struct of_device_id of_palmas_match_tbl[] = {
{ .compatible = "ti,palmas-usb", },
{ .compatible = "ti,palmas-usb-vid", },
{ .compatible = "ti,twl6035-usb", },
{ .compatible = "ti,twl6035-usb-vid", },
{ /* end */ }
};

1
include/linux/extcon/extcon-gpio.h
Просмотреть файл

@ -51,6 +51,7 @@ struct gpio_extcon_platform_data {
/* if NULL, "0" or "1" will be printed */
const char *state_on;
const char *state_off;
bool check_on_resume;
};
#endif /* __EXTCON_GPIO_H__ */

9
include/linux/mfd/arizona/registers.h
Просмотреть файл

@ -2196,6 +2196,15 @@
/*
* R677 (0x2A5) - Mic Detect 3
*/
#define ARIZONA_MICD_LVL_0 0x0004 /* MICD_LVL - [2] */
#define ARIZONA_MICD_LVL_1 0x0008 /* MICD_LVL - [3] */
#define ARIZONA_MICD_LVL_2 0x0010 /* MICD_LVL - [4] */
#define ARIZONA_MICD_LVL_3 0x0020 /* MICD_LVL - [5] */
#define ARIZONA_MICD_LVL_4 0x0040 /* MICD_LVL - [6] */
#define ARIZONA_MICD_LVL_5 0x0080 /* MICD_LVL - [7] */
#define ARIZONA_MICD_LVL_6 0x0100 /* MICD_LVL - [8] */
#define ARIZONA_MICD_LVL_7 0x0200 /* MICD_LVL - [9] */
#define ARIZONA_MICD_LVL_8 0x0400 /* MICD_LVL - [10] */
#define ARIZONA_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */
#define ARIZONA_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */
#define ARIZONA_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */