[POWERPC] Create Marvell mv64x60 MPSC (serial) platform_data

This patch creates platform_device entries for the Marvell mv64x60
MPSC (multi-protocol serial controller) ports, based on information
contained in the device tree.

This driver (like the other mv64x60 drivers) are unusual in that it
works on both the MIPS and PowerPC architectures.  Because of that,
the drivers do not support the normal PowerPC of_platform_bus_type.
They support platform_bus_type instead.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/platforms/embedded6xx/Kconfig

@@ -46,6 +46,9 @@ config MPC10X_BRIDGE
 	select PPC_INDIRECT_PCI
 	default y
 
+config MV64X60
+	bool
+
 config MPC10X_OPENPIC
 	bool
 	depends on LINKSTATION

arch/powerpc/sysdev/Makefile

@@ -16,7 +16,7 @@ obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_FSL_PCIE)		+= fsl_pcie.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
-obj-$(CONFIG_MV64X60)		+= mv64x60_pic.o
+obj-$(CONFIG_MV64X60)		+= mv64x60_pic.o mv64x60_dev.o
 
 # contains only the suspend handler for time
 obj-$(CONFIG_PM)		+= timer.o

arch/powerpc/sysdev/mv64x60_dev.c

@@ -0,0 +1,221 @@
+/*
+ * Platform device setup for Marvell mv64360/mv64460 host bridges (Discovery)
+ *
+ * Author: Dale Farnsworth <dale@farnsworth.org>
+ *
+ * 2007 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
+#include <asm/prom.h>
+
+/*
+ * These functions provide the necessary setup for the mv64x60 drivers.
+ * These drivers are unusual in that they work on both the MIPS and PowerPC
+ * architectures.  Because of that, the drivers do not support the normal
+ * PowerPC of_platform_bus_type.  They support platform_bus_type instead.
+ */
+
+/*
+ * Create MPSC platform devices
+ */
+static int __init mv64x60_mpsc_register_shared_pdev(struct device_node *np)
+{
+	struct platform_device *pdev;
+	struct resource r[2];
+	struct mpsc_shared_pdata pdata;
+	const phandle *ph;
+	struct device_node *mpscrouting, *mpscintr;
+	int err;
+
+	ph = of_get_property(np, "mpscrouting", NULL);
+	mpscrouting = of_find_node_by_phandle(*ph);
+	if (!mpscrouting)
+		return -ENODEV;
+
+	err = of_address_to_resource(mpscrouting, 0, &r[0]);
+	of_node_put(mpscrouting);
+	if (err)
+		return err;
+
+	ph = of_get_property(np, "mpscintr", NULL);
+	mpscintr = of_find_node_by_phandle(*ph);
+	if (!mpscintr)
+		return -ENODEV;
+
+	err = of_address_to_resource(mpscintr, 0, &r[1]);
+	of_node_put(mpscintr);
+	if (err)
+		return err;
+
+	memset(&pdata, 0, sizeof(pdata));
+
+	pdev = platform_device_alloc(MPSC_SHARED_NAME, 0);
+	if (!pdev)
+		return -ENOMEM;
+
+	err = platform_device_add_resources(pdev, r, 2);
+	if (err)
+		goto error;
+
+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (err)
+		goto error;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto error;
+
+	return 0;
+
+error:
+	platform_device_put(pdev);
+	return err;
+}
+
+
+static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
+{
+	struct resource r[5];
+	struct mpsc_pdata pdata;
+	struct platform_device *pdev;
+	const unsigned int *prop;
+	const phandle *ph;
+	struct device_node *sdma, *brg;
+	int err;
+	int port_number;
+
+	/* only register the shared platform device the first time through */
+	if (id == 0 && (err = mv64x60_mpsc_register_shared_pdev(np)))
+		return err;
+
+	memset(r, 0, sizeof(r));
+
+	err = of_address_to_resource(np, 0, &r[0]);
+	if (err)
+		return err;
+
+	of_irq_to_resource(np, 0, &r[4]);
+
+	ph = of_get_property(np, "sdma", NULL);
+	sdma = of_find_node_by_phandle(*ph);
+	if (!sdma)
+		return -ENODEV;
+
+	of_irq_to_resource(sdma, 0, &r[3]);
+	err = of_address_to_resource(sdma, 0, &r[1]);
+	of_node_put(sdma);
+	if (err)
+		return err;
+
+	ph = of_get_property(np, "brg", NULL);
+	brg = of_find_node_by_phandle(*ph);
+	if (!brg)
+		return -ENODEV;
+
+	err = of_address_to_resource(brg, 0, &r[2]);
+	of_node_put(brg);
+	if (err)
+		return err;
+
+	prop = of_get_property(np, "block-index", NULL);
+	if (!prop)
+		return -ENODEV;
+	port_number = *(int *)prop;
+
+	memset(&pdata, 0, sizeof(pdata));
+
+	pdata.cache_mgmt = 1; /* All current revs need this set */
+
+	prop = of_get_property(np, "max_idle", NULL);
+	if (prop)
+		pdata.max_idle = *prop;
+
+	prop = of_get_property(brg, "current-speed", NULL);
+	if (prop)
+		pdata.default_baud = *prop;
+
+	/* Default is 8 bits, no parity, no flow control */
+	pdata.default_bits = 8;
+	pdata.default_parity = 'n';
+	pdata.default_flow = 'n';
+
+	prop = of_get_property(np, "chr_1", NULL);
+	if (prop)
+		pdata.chr_1_val = *prop;
+
+	prop = of_get_property(np, "chr_2", NULL);
+	if (prop)
+		pdata.chr_2_val = *prop;
+
+	prop = of_get_property(np, "chr_10", NULL);
+	if (prop)
+		pdata.chr_10_val = *prop;
+
+	prop = of_get_property(np, "mpcr", NULL);
+	if (prop)
+		pdata.mpcr_val = *prop;
+
+	prop = of_get_property(brg, "bcr", NULL);
+	if (prop)
+		pdata.bcr_val = *prop;
+
+	pdata.brg_can_tune = 1; /* All current revs need this set */
+
+	prop = of_get_property(brg, "clock-src", NULL);
+	if (prop)
+		pdata.brg_clk_src = *prop;
+
+	prop = of_get_property(brg, "clock-frequency", NULL);
+	if (prop)
+		pdata.brg_clk_freq = *prop;
+
+	pdev = platform_device_alloc(MPSC_CTLR_NAME, port_number);
+	if (!pdev)
+		return -ENOMEM;
+
+	err = platform_device_add_resources(pdev, r, 5);
+	if (err)
+		goto error;
+
+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (err)
+		goto error;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto error;
+
+	return 0;
+
+error:
+	platform_device_put(pdev);
+	return err;
+}
+
+static int __init mv64x60_device_setup(void)
+{
+	struct device_node *np = NULL;
+	int id;
+	int err;
+
+	for (id = 0;
+	     (np = of_find_compatible_node(np, "serial", "marvell,mpsc")); id++)
+		if ((err = mv64x60_mpsc_device_setup(np, id)))
+			goto error;
+
+	return 0;
+
+error:
+	of_node_put(np);
+	return err;
+}
+arch_initcall(mv64x60_device_setup);