powerpc/pci: Use common PHB resource hookup

The 32-bit and 64-bit powerpc PCI code used to set up the resource
pointers of the root bus of a given PHB in completely different
places.

This unifies this in large part, by making 32-bit use a routine very
similar to what 64-bit does when initially scanning the PCI busses.

The actual setup of the PHB resources itself is then moved to a
common function in pci-common.c.

This should cause no functional change on 64-bit.  On 32-bit, the
effect is that the PHB resources are going to be setup a bit earlier,
instead of being setup from pcibios_fixup_bus().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit is contained in:
Benjamin Herrenschmidt 2008-10-27 19:48:29 +00:00 коммит произвёл Paul Mackerras
Родитель b0494bc8ee
Коммит 5328032335
4 изменённых файлов: 96 добавлений и 60 удалений

Просмотреть файл

@ -290,6 +290,7 @@ extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
/* Allocate & free a PCI host bridge structure */
extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
extern void pcibios_setup_phb_resources(struct pci_controller *hose);
#ifdef CONFIG_PCI
extern unsigned long pci_address_to_pio(phys_addr_t address);

Просмотреть файл

@ -1421,3 +1421,61 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
return pci_enable_resources(dev, mask);
}
void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
{
struct pci_bus *bus = hose->bus;
struct resource *res;
int i;
/* Hookup PHB IO resource */
bus->resource[0] = res = &hose->io_resource;
if (!res->flags) {
printk(KERN_WARNING "PCI: I/O resource not set for host"
" bridge %s (domain %d)\n",
hose->dn->full_name, hose->global_number);
#ifdef CONFIG_PPC32
/* Workaround for lack of IO resource only on 32-bit */
res->start = (unsigned long)hose->io_base_virt - isa_io_base;
res->end = res->start + IO_SPACE_LIMIT;
res->flags = IORESOURCE_IO;
#endif /* CONFIG_PPC32 */
}
pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n",
(unsigned long long)res->start,
(unsigned long long)res->end,
(unsigned long)res->flags);
/* Hookup PHB Memory resources */
for (i = 0; i < 3; ++i) {
res = &hose->mem_resources[i];
if (!res->flags) {
if (i > 0)
continue;
printk(KERN_ERR "PCI: Memory resource 0 not set for "
"host bridge %s (domain %d)\n",
hose->dn->full_name, hose->global_number);
#ifdef CONFIG_PPC32
/* Workaround for lack of MEM resource only on 32-bit */
res->start = hose->pci_mem_offset;
res->end = (resource_size_t)-1LL;
res->flags = IORESOURCE_MEM;
#endif /* CONFIG_PPC32 */
}
bus->resource[i+1] = res;
pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i,
(unsigned long long)res->start,
(unsigned long long)res->end,
(unsigned long)res->flags);
}
pr_debug("PCI: PHB MEM offset = %016llx\n",
(unsigned long long)hose->pci_mem_offset);
pr_debug("PCI: PHB IO offset = %08lx\n",
(unsigned long)hose->io_base_virt - _IO_BASE);
}

Просмотреть файл

@ -373,10 +373,41 @@ void pcibios_make_OF_bus_map(void)
}
#endif /* CONFIG_PPC_OF */
static void __devinit pcibios_scan_phb(struct pci_controller *hose)
{
struct pci_bus *bus;
struct device_node *node = hose->dn;
unsigned long io_offset;
struct resource *res = &hose->io_resource;
pr_debug("PCI: Scanning PHB %s\n",
node ? node->full_name : "<NO NAME>");
/* Create an empty bus for the toplevel */
bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
if (bus == NULL) {
printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
hose->global_number);
return;
}
bus->secondary = hose->first_busno;
hose->bus = bus;
/* Fixup IO space offset */
io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
res->start = (res->start + io_offset) & 0xffffffffu;
res->end = (res->end + io_offset) & 0xffffffffu;
/* Wire up PHB bus resources */
pcibios_setup_phb_resources(hose);
/* Scan children */
hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
}
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
struct pci_bus *bus;
int next_busno = 0;
printk(KERN_INFO "PCI: Probing PCI hardware\n");
@ -389,12 +420,8 @@ static int __init pcibios_init(void)
if (pci_assign_all_buses)
hose->first_busno = next_busno;
hose->last_busno = 0xff;
bus = pci_scan_bus_parented(hose->parent, hose->first_busno,
hose->ops, hose);
if (bus) {
pci_bus_add_devices(bus);
hose->last_busno = bus->subordinate;
}
pcibios_scan_phb(hose);
pci_bus_add_devices(hose->bus);
if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset;
}
@ -421,45 +448,8 @@ subsys_initcall(pcibios_init);
void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
{
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
unsigned long io_offset;
struct resource *res;
int i;
struct pci_dev *dev;
/* Hookup PHB resources */
io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
if (bus->parent == NULL) {
/* This is a host bridge - fill in its resources */
hose->bus = bus;
bus->resource[0] = res = &hose->io_resource;
if (!res->flags) {
if (io_offset)
printk(KERN_ERR "I/O resource not set for host"
" bridge %d\n", hose->global_number);
res->start = 0;
res->end = IO_SPACE_LIMIT;
res->flags = IORESOURCE_IO;
}
res->start = (res->start + io_offset) & 0xffffffffu;
res->end = (res->end + io_offset) & 0xffffffffu;
for (i = 0; i < 3; ++i) {
res = &hose->mem_resources[i];
if (!res->flags) {
if (i > 0)
continue;
printk(KERN_ERR "Memory resource not set for "
"host bridge %d\n", hose->global_number);
res->start = hose->pci_mem_offset;
res->end = ~0U;
res->flags = IORESOURCE_MEM;
}
bus->resource[i+1] = res;
}
}
if (ppc_md.pci_dma_bus_setup)
ppc_md.pci_dma_bus_setup(bus);

Просмотреть файл

@ -322,7 +322,7 @@ void __devinit scan_phb(struct pci_controller *hose)
{
struct pci_bus *bus;
struct device_node *node = hose->dn;
int i, mode;
int mode;
pr_debug("PCI: Scanning PHB %s\n",
node ? node->full_name : "<NO NAME>");
@ -341,20 +341,7 @@ void __devinit scan_phb(struct pci_controller *hose)
pcibios_map_io_space(bus);
/* Wire up PHB bus resources */
pr_debug("PCI: PHB IO resource = %016lx-%016lx [%lx]\n",
hose->io_resource.start, hose->io_resource.end,
hose->io_resource.flags);
bus->resource[0] = &hose->io_resource;
for (i = 0; i < 3; ++i) {
pr_debug("PCI: PHB MEM resource %d = %016lx-%016lx [%lx]\n", i,
hose->mem_resources[i].start,
hose->mem_resources[i].end,
hose->mem_resources[i].flags);
bus->resource[i+1] = &hose->mem_resources[i];
}
pr_debug("PCI: PHB MEM offset = %016lx\n", hose->pci_mem_offset);
pr_debug("PCI: PHB IO offset = %08lx\n",
(unsigned long)hose->io_base_virt - _IO_BASE);
pcibios_setup_phb_resources(hose);
/* Get probe mode and perform scan */
mode = PCI_PROBE_NORMAL;
@ -376,7 +363,7 @@ static int __init pcibios_init(void)
printk(KERN_INFO "PCI: Probing PCI hardware\n");
/* For now, override phys_mem_access_prot. If we need it,
/* For now, override phys_mem_access_prot. If we need it,g
* later, we may move that initialization to each ppc_md
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;