From 6272c0de13abf1480f701d38288f28a11b4301c4 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Fri, 14 Apr 2017 16:38:19 -0700 Subject: [PATCH 0001/1065] iio: proximity: as3935: recalibrate RCO after resume According to the datasheet the RCO must be recalibrated on every power-on-reset. Also remove mutex locking in the calibration function since callers other than the probe function (which doesn't need it) will have a lock. Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support") Cc: George McCollister Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/as3935.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index ddf9bee89f77..d0f5e53aad59 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -269,8 +269,6 @@ static irqreturn_t as3935_interrupt_handler(int irq, void *private) static void calibrate_as3935(struct as3935_state *st) { - mutex_lock(&st->lock); - /* mask disturber interrupt bit */ as3935_write(st, AS3935_INT, BIT(5)); @@ -280,8 +278,6 @@ static void calibrate_as3935(struct as3935_state *st) mdelay(2); as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV)); - - mutex_unlock(&st->lock); } #ifdef CONFIG_PM_SLEEP @@ -318,6 +314,8 @@ static int as3935_resume(struct device *dev) val &= ~AS3935_AFE_PWR_BIT; ret = as3935_write(st, AS3935_AFE_GAIN, val); + calibrate_as3935(st); + err_resume: mutex_unlock(&st->lock); From 35fa70dfd6e6f270d7aabb3470855208b11ac9fb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 20 Apr 2017 13:26:18 +0300 Subject: [PATCH 0002/1065] iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe devm_iio_device_alloc() doesn't return ERR_PTRs, it returns NULLs. Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver") Signed-off-by: Dan Carpenter Signed-off-by: Jonathan Cameron --- drivers/iio/adc/max9611.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c index ec82106480e1..dc3869bf3248 100644 --- a/drivers/iio/adc/max9611.c +++ b/drivers/iio/adc/max9611.c @@ -536,8 +536,8 @@ static int max9611_probe(struct i2c_client *client, int ret; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*max9611)); - if (IS_ERR(indio_dev)) - return PTR_ERR(indio_dev); + if (!indio_dev) + return -ENOMEM; i2c_set_clientdata(client, indio_dev); From 0de0e198bc7191a0e46cf71f66fec4d07ca91396 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 25 Apr 2017 12:58:31 -0700 Subject: [PATCH 0003/1065] ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service Reading an ACPI table through the /sys/firmware/acpi/tables interface more than 65,536 times leads to the following log message: ACPI Error: Table ffff88033595eaa8, Validation count is zero after increment (20170119/tbutils-423) ...and the table being unavailable until the next reboot. Add the missing acpi_put_table() so the table ->validation_count is decremented after each read. Reported-by: Anush Seetharaman Fixes: 174cc7187e6f "ACPICA: Tables: Back port acpi_get_table_with_size() ..." Signed-off-by: Dan Williams Cc: 4.10+ # 4.10+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sysfs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index cf05ae973381..5180fef9eb49 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -333,14 +333,17 @@ static ssize_t acpi_table_show(struct file *filp, struct kobject *kobj, container_of(bin_attr, struct acpi_table_attr, attr); struct acpi_table_header *table_header = NULL; acpi_status status; + ssize_t rc; status = acpi_get_table(table_attr->name, table_attr->instance, &table_header); if (ACPI_FAILURE(status)) return -ENODEV; - return memory_read_from_buffer(buf, count, &offset, - table_header, table_header->length); + rc = memory_read_from_buffer(buf, count, &offset, table_header, + table_header->length); + acpi_put_table(table_header); + return rc; } static int acpi_table_attr_init(struct kobject *tables_obj, From 275292d3a3d62670b1b13484707b74e5239b4bb0 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Thu, 27 Apr 2017 00:52:32 -0700 Subject: [PATCH 0004/1065] iio: proximity: as3935: fix AS3935_INT mask AS3935 interrupt mask has been incorrect so valid lightning events would never trigger an buffer event. Also noise interrupt should be BIT(0). Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support") CC: stable@vger.kernel.org Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/as3935.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index d0f5e53aad59..2e94e5ad884b 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -40,9 +40,9 @@ #define AS3935_AFE_PWR_BIT BIT(0) #define AS3935_INT 0x03 -#define AS3935_INT_MASK 0x07 +#define AS3935_INT_MASK 0x0f #define AS3935_EVENT_INT BIT(3) -#define AS3935_NOISE_INT BIT(1) +#define AS3935_NOISE_INT BIT(0) #define AS3935_DATA 0x07 #define AS3935_DATA_MASK 0x3F From 2ac97f0f6654da14312d125005c77a6010e0ea38 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Tue, 25 Apr 2017 11:29:56 -0700 Subject: [PATCH 0005/1065] HID: wacom: Have wacom_tpc_irq guard against possible NULL dereference The following Smatch complaint was generated in response to commit 2a6cdbd ("HID: wacom: Introduce new 'touch_input' device"): drivers/hid/wacom_wac.c:1586 wacom_tpc_irq() error: we previously assumed 'wacom->touch_input' could be null (see line 1577) The 'touch_input' and 'pen_input' variables point to the 'struct input_dev' used for relaying touch and pen events to userspace, respectively. If a device does not have a touch interface or pen interface, the associated input variable is NULL. The 'wacom_tpc_irq()' function is responsible for forwarding input reports to a more-specific IRQ handler function. An unknown report could theoretically be mistaken as e.g. a touch report on a device which does not have a touch interface. This can be prevented by only calling the pen/touch functions are called when the pen/touch pointers are valid. Fixes: 2a6cdbd ("HID: wacom: Introduce new 'touch_input' device") Signed-off-by: Jason Gerecke Reviewed-by: Ping Cheng Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/wacom_wac.c | 47 +++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 23 deletions(-) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 4b225fb19a16..e274c9dc32f3 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1571,37 +1571,38 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) { unsigned char *data = wacom->data; - if (wacom->pen_input) + if (wacom->pen_input) { dev_dbg(wacom->pen_input->dev.parent, "%s: received report #%d\n", __func__, data[0]); - else if (wacom->touch_input) + + if (len == WACOM_PKGLEN_PENABLED || + data[0] == WACOM_REPORT_PENABLED) + return wacom_tpc_pen(wacom); + } + else if (wacom->touch_input) { dev_dbg(wacom->touch_input->dev.parent, "%s: received report #%d\n", __func__, data[0]); - switch (len) { - case WACOM_PKGLEN_TPC1FG: - return wacom_tpc_single_touch(wacom, len); - - case WACOM_PKGLEN_TPC2FG: - return wacom_tpc_mt_touch(wacom); - - case WACOM_PKGLEN_PENABLED: - return wacom_tpc_pen(wacom); - - default: - switch (data[0]) { - case WACOM_REPORT_TPC1FG: - case WACOM_REPORT_TPCHID: - case WACOM_REPORT_TPCST: - case WACOM_REPORT_TPC1FGE: + switch (len) { + case WACOM_PKGLEN_TPC1FG: return wacom_tpc_single_touch(wacom, len); - case WACOM_REPORT_TPCMT: - case WACOM_REPORT_TPCMT2: - return wacom_mt_touch(wacom); + case WACOM_PKGLEN_TPC2FG: + return wacom_tpc_mt_touch(wacom); - case WACOM_REPORT_PENABLED: - return wacom_tpc_pen(wacom); + default: + switch (data[0]) { + case WACOM_REPORT_TPC1FG: + case WACOM_REPORT_TPCHID: + case WACOM_REPORT_TPCST: + case WACOM_REPORT_TPC1FGE: + return wacom_tpc_single_touch(wacom, len); + + case WACOM_REPORT_TPCMT: + case WACOM_REPORT_TPCMT2: + return wacom_mt_touch(wacom); + + } } } From f4b65b9563216b3e01a5cc844c3ba68901d9b195 Mon Sep 17 00:00:00 2001 From: Che-Liang Chiou Date: Fri, 7 Apr 2017 10:12:36 +0200 Subject: [PATCH 0006/1065] HID: magicmouse: Set multi-touch keybits for Magic Mouse The driver emits multi-touch events for Magic Trackpad as well as Magic Mouse, but it does not set keybits that are related to multi-touch event for Magic Mouse; so set these keybits. The keybits that are not set cause trouble because user programs often probe these keybits for self-configuration and thus they cannot operate properly if the keybits are not set. One of such troubles is that libevdev will not be able to emit correct touch count, causing gestures library failed to do fling stop. Signed-off-by: Che-Liang Chiou Signed-off-by: Thierry Escande Signed-off-by: Jiri Kosina --- drivers/hid/hid-magicmouse.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 20b40ad26325..1d6c997b3001 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -349,6 +349,7 @@ static int magicmouse_raw_event(struct hid_device *hdev, if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) { magicmouse_emit_buttons(msc, clicks & 3); + input_mt_report_pointer_emulation(input, true); input_report_rel(input, REL_X, x); input_report_rel(input, REL_Y, y); } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ @@ -388,16 +389,16 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd __clear_bit(BTN_RIGHT, input->keybit); __clear_bit(BTN_MIDDLE, input->keybit); __set_bit(BTN_MOUSE, input->keybit); - __set_bit(BTN_TOOL_FINGER, input->keybit); - __set_bit(BTN_TOOL_DOUBLETAP, input->keybit); - __set_bit(BTN_TOOL_TRIPLETAP, input->keybit); - __set_bit(BTN_TOOL_QUADTAP, input->keybit); - __set_bit(BTN_TOOL_QUINTTAP, input->keybit); - __set_bit(BTN_TOUCH, input->keybit); - __set_bit(INPUT_PROP_POINTER, input->propbit); __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); } + __set_bit(BTN_TOOL_FINGER, input->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input->keybit); + __set_bit(BTN_TOOL_QUADTAP, input->keybit); + __set_bit(BTN_TOOL_QUINTTAP, input->keybit); + __set_bit(BTN_TOUCH, input->keybit); + __set_bit(INPUT_PROP_POINTER, input->propbit); __set_bit(EV_ABS, input->evbit); From 9122b54f266ddee09654fe3fbc503c1a60f4a01c Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Thu, 4 May 2017 17:32:19 -0700 Subject: [PATCH 0007/1065] iio: proximity: as3935: fix iio_trigger_poll issue Using iio_trigger_poll() can oops when multiple interrupts happen before the first is handled. Use iio_trigger_poll_chained() instead and use the timestamp when processed, since it will be in theory be 2 ms max latency. Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support") Cc: stable@vger.kernel.org Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/as3935.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index 2e94e5ad884b..aa4df0dcc8c9 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -215,7 +215,7 @@ static irqreturn_t as3935_trigger_handler(int irq, void *private) st->buffer[0] = val & AS3935_DATA_MASK; iio_push_to_buffers_with_timestamp(indio_dev, &st->buffer, - pf->timestamp); + iio_get_time_ns(indio_dev)); err_read: iio_trigger_notify_done(indio_dev->trig); @@ -244,7 +244,7 @@ static void as3935_event_work(struct work_struct *work) switch (val) { case AS3935_EVENT_INT: - iio_trigger_poll(st->trig); + iio_trigger_poll_chained(st->trig); break; case AS3935_NOISE_INT: dev_warn(&st->spi->dev, "noise level is too high\n"); From f83e36e0a372c012a31d57e9d3e69d29a158264e Mon Sep 17 00:00:00 2001 From: Eduardo Molinas Date: Mon, 1 May 2017 18:45:58 -0400 Subject: [PATCH 0008/1065] iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered If the driver is built as a module, it won't be autloaded if the devices are registered via PLATFORM code because the PLATFORM device table entries are not exported as aliases Before the patch: $ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias $ After the patch: $ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias alias: platform:sun6i-a31-gpadc-iio alias: platform:sun5i-a13-gpadc-iio alias: platform:sun4i-a10-gpadc-iio Signed-off-by: Eduardo Molinas Acked-by: Chen-Yu Tsai Signed-off-by: Jonathan Cameron --- drivers/iio/adc/sun4i-gpadc-iio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c index b23527309088..c3d7ba100a48 100644 --- a/drivers/iio/adc/sun4i-gpadc-iio.c +++ b/drivers/iio/adc/sun4i-gpadc-iio.c @@ -700,6 +700,7 @@ static const struct platform_device_id sun4i_gpadc_id[] = { { "sun6i-a31-gpadc-iio", (kernel_ulong_t)&sun6i_gpadc_data }, { /* sentinel */ }, }; +MODULE_DEVICE_TABLE(platform, sun4i_gpadc_id); static struct platform_driver sun4i_gpadc_driver = { .driver = { From f35327f16b0cbe51d47a366aaf5dd9a3d4fac01b Mon Sep 17 00:00:00 2001 From: Eduardo Molinas Date: Mon, 1 May 2017 18:45:59 -0400 Subject: [PATCH 0009/1065] iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered If the driver is built as a module, it won't be autloaded if the devices are registered via OF code because the OF device table entries are not exported as aliases Before the patch: $ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias alias: platform:sun6i-a31-gpadc-iio alias: platform:sun5i-a13-gpadc-iio alias: platform:sun4i-a10-gpadc-iio After the patch: $ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias alias: of:N*T*Callwinner,sun8i-a33-thsC* alias: of:N*T*Callwinner,sun8i-a33-ths alias: platform:sun6i-a31-gpadc-iio alias: platform:sun5i-a13-gpadc-iio alias: platform:sun4i-a10-gpadc-iio Signed-off-by: Eduardo Molinas Signed-off-by: Jonathan Cameron --- drivers/iio/adc/sun4i-gpadc-iio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c index c3d7ba100a48..1c83b45043bf 100644 --- a/drivers/iio/adc/sun4i-gpadc-iio.c +++ b/drivers/iio/adc/sun4i-gpadc-iio.c @@ -712,6 +712,7 @@ static struct platform_driver sun4i_gpadc_driver = { .probe = sun4i_gpadc_probe, .remove = sun4i_gpadc_remove, }; +MODULE_DEVICE_TABLE(of, sun4i_gpadc_of_id); module_platform_driver(sun4i_gpadc_driver); From 1c005f9c129201121ef90bde57c374a4403ccfa6 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 28 Apr 2017 00:22:15 -0400 Subject: [PATCH 0010/1065] MAINTAINERS: Remove Javier Martinez Canillas as reviewer for Exynos I left Samsung and lost access to most Exynos hardware and documentation. Also, I likely won't be able to keep an eye on the platform anymore in the short term so remove myself as a reviewer for Exynos. Signed-off-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 38d3e4ed7208..7e80e28c92df 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1692,7 +1692,6 @@ N: rockchip ARM/SAMSUNG EXYNOS ARM ARCHITECTURES M: Kukjin Kim M: Krzysztof Kozlowski -R: Javier Martinez Canillas L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/ From c32537d49faba69f5c2146f1ab6dbacf26bff133 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Sun, 7 May 2017 21:24:51 +0200 Subject: [PATCH 0011/1065] xtensa: Use seq_puts() in c_show() A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Max Filippov --- arch/xtensa/kernel/setup.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 197e75b400b1..460a226699b4 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -594,8 +594,7 @@ c_show(struct seq_file *f, void *slot) (ccount_freq/10000) % 100, loops_per_jiffy/(500000/HZ), (loops_per_jiffy/(5000/HZ)) % 100); - - seq_printf(f,"flags\t\t: " + seq_puts(f, "flags\t\t: " #if XCHAL_HAVE_NMI "nmi " #endif From 5e78e465abcba4a21e5cc52bef41aa4b3361957d Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Thu, 25 Aug 2016 14:28:09 +0200 Subject: [PATCH 0012/1065] xtensa: ISS: Use kmalloc_array() in simdisk_init() * A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring Signed-off-by: Max Filippov --- arch/xtensa/platforms/iss/simdisk.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c index 02e94bb3ad3e..c45b90bb9339 100644 --- a/arch/xtensa/platforms/iss/simdisk.c +++ b/arch/xtensa/platforms/iss/simdisk.c @@ -317,8 +317,7 @@ static int __init simdisk_init(void) if (simdisk_count > MAX_SIMDISK_COUNT) simdisk_count = MAX_SIMDISK_COUNT; - sddev = kmalloc(simdisk_count * sizeof(struct simdisk), - GFP_KERNEL); + sddev = kmalloc_array(simdisk_count, sizeof(*sddev), GFP_KERNEL); if (sddev == NULL) goto out_unregister; From 0bb7a37f8d15e5fb5d21776875f9fbc74e10753a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Diego=20Elio=20Petten=C3=B2?= Date: Wed, 26 Apr 2017 17:37:04 +0100 Subject: [PATCH 0013/1065] HID: elecom: extend to fix the descriptor for DEFT trackballs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ELECOM DEFT trackballs report only five buttons, when the device actually has 8. Change the descriptor so that the HID driver can see all of them. For completeness and future reference, I included a side-by-side diff of the part of the descriptor that is being edited. Cc: Jiri Kosina Cc: Benjamin Tissoires Cc: Yuxuan Shui Signed-off-by: Diego Elio Pettenò Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 6 ++-- drivers/hid/hid-core.c | 2 ++ drivers/hid/hid-elecom.c | 62 ++++++++++++++++++++++++++++++++++------ drivers/hid/hid-ids.h | 2 ++ 4 files changed, 61 insertions(+), 11 deletions(-) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index fe40e5e499dd..687705c50794 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -275,10 +275,12 @@ config HID_EMS_FF - Trio Linker Plus II config HID_ELECOM - tristate "ELECOM BM084 bluetooth mouse" + tristate "ELECOM HID devices" depends on HID ---help--- - Support for the ELECOM BM084 (bluetooth mouse). + Support for ELECOM devices: + - BM084 Bluetooth Mouse + - DEFT Trackball (Wired and wireless) config HID_ELO tristate "ELO USB 4000/4500 touchscreen" diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 37084b645785..38d041510e1d 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1891,6 +1891,8 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_WN) }, { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_FA) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRED) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRELESS) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_ACCUTOUCH_2216) }, diff --git a/drivers/hid/hid-elecom.c b/drivers/hid/hid-elecom.c index 6e3848a8d8dd..e2c7465df69f 100644 --- a/drivers/hid/hid-elecom.c +++ b/drivers/hid/hid-elecom.c @@ -1,10 +1,8 @@ /* - * HID driver for Elecom BM084 (bluetooth mouse). - * Removes a non-existing horizontal wheel from - * the HID descriptor. - * (This module is based on "hid-ortek".) - * + * HID driver for ELECOM devices. * Copyright (c) 2010 Richard Nauber + * Copyright (c) 2016 Yuxuan Shui + * Copyright (c) 2017 Diego Elio Pettenò */ /* @@ -23,15 +21,61 @@ static __u8 *elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { - if (*rsize >= 48 && rdesc[46] == 0x05 && rdesc[47] == 0x0c) { - hid_info(hdev, "Fixing up Elecom BM084 report descriptor\n"); - rdesc[47] = 0x00; + switch (hdev->product) { + case USB_DEVICE_ID_ELECOM_BM084: + /* The BM084 Bluetooth mouse includes a non-existing horizontal + * wheel in the HID descriptor. */ + if (*rsize >= 48 && rdesc[46] == 0x05 && rdesc[47] == 0x0c) { + hid_info(hdev, "Fixing up Elecom BM084 report descriptor\n"); + rdesc[47] = 0x00; + } + break; + case USB_DEVICE_ID_ELECOM_DEFT_WIRED: + case USB_DEVICE_ID_ELECOM_DEFT_WIRELESS: + /* The DEFT trackball has eight buttons, but its descriptor only + * reports five, disabling the three Fn buttons on the top of + * the mouse. + * + * Apply the following diff to the descriptor: + * + * Collection (Physical), Collection (Physical), + * Report ID (1), Report ID (1), + * Report Count (5), -> Report Count (8), + * Report Size (1), Report Size (1), + * Usage Page (Button), Usage Page (Button), + * Usage Minimum (01h), Usage Minimum (01h), + * Usage Maximum (05h), -> Usage Maximum (08h), + * Logical Minimum (0), Logical Minimum (0), + * Logical Maximum (1), Logical Maximum (1), + * Input (Variable), Input (Variable), + * Report Count (1), -> Report Count (0), + * Report Size (3), Report Size (3), + * Input (Constant), Input (Constant), + * Report Size (16), Report Size (16), + * Report Count (2), Report Count (2), + * Usage Page (Desktop), Usage Page (Desktop), + * Usage (X), Usage (X), + * Usage (Y), Usage (Y), + * Logical Minimum (-32768), Logical Minimum (-32768), + * Logical Maximum (32767), Logical Maximum (32767), + * Input (Variable, Relative), Input (Variable, Relative), + * End Collection, End Collection, + */ + if (*rsize == 213 && rdesc[13] == 5 && rdesc[21] == 5) { + hid_info(hdev, "Fixing up Elecom DEFT Fn buttons\n"); + rdesc[13] = 8; /* Button/Variable Report Count */ + rdesc[21] = 8; /* Button/Variable Usage Maximum */ + rdesc[29] = 0; /* Button/Constant Report Count */ + } + break; } return rdesc; } static const struct hid_device_id elecom_devices[] = { - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084)}, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRED) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRELESS) }, { } }; MODULE_DEVICE_TABLE(hid, elecom_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 643390ba749d..8e8a1baee090 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -358,6 +358,8 @@ #define USB_VENDOR_ID_ELECOM 0x056e #define USB_DEVICE_ID_ELECOM_BM084 0x0061 +#define USB_DEVICE_ID_ELECOM_DEFT_WIRED 0x00fe +#define USB_DEVICE_ID_ELECOM_DEFT_WIRELESS 0x00ff #define USB_VENDOR_ID_DREAM_CHEEKY 0x1d34 #define USB_DEVICE_ID_DREAM_CHEEKY_WN 0x0004 From 38b8f823864707eb1cf331d2247608c419ed388c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 3 May 2017 11:13:46 +0800 Subject: [PATCH 0014/1065] clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset The register offset for the lcd1-ch1 clock was incorrectly pointing to the lcd0-ch1 clock. This resulted in the lcd0-ch1 clock being disabled when the clk core disables unused clocks. This then stops the simplefb HDMI output path. Reported-by: Bob Ham Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Cc: stable@vger.kernel.org # 4.9.x- Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c index 89e68d29bf45..df97e25aec76 100644 --- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c +++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c @@ -556,7 +556,7 @@ static SUNXI_CCU_M_WITH_MUX_GATE(lcd0_ch1_clk, "lcd0-ch1", lcd_ch1_parents, 0x12c, 0, 4, 24, 3, BIT(31), CLK_SET_RATE_PARENT); static SUNXI_CCU_M_WITH_MUX_GATE(lcd1_ch1_clk, "lcd1-ch1", lcd_ch1_parents, - 0x12c, 0, 4, 24, 3, BIT(31), + 0x130, 0, 4, 24, 3, BIT(31), CLK_SET_RATE_PARENT); static const char * const csi_sclk_parents[] = { "pll-video0", "pll-video1", From 7ffc781ec46ef1e9aedb482f5f04425bd8bb2753 Mon Sep 17 00:00:00 2001 From: Yong Deng Date: Fri, 5 May 2017 18:31:57 +0800 Subject: [PATCH 0015/1065] clk: sunxi-ng: v3s: Fix usb otg device reset bit V3S's usb otg device reset bit should be 24, not 23. Cc: stable@vger.kernel.org Signed-off-by: Yong Deng Reviewed-By: Icenowy Zheng Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c index e58706b40ae9..6297add857b5 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c +++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c @@ -537,7 +537,7 @@ static struct ccu_reset_map sun8i_v3s_ccu_resets[] = { [RST_BUS_EMAC] = { 0x2c0, BIT(17) }, [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) }, [RST_BUS_SPI0] = { 0x2c0, BIT(20) }, - [RST_BUS_OTG] = { 0x2c0, BIT(23) }, + [RST_BUS_OTG] = { 0x2c0, BIT(24) }, [RST_BUS_EHCI0] = { 0x2c0, BIT(26) }, [RST_BUS_OHCI0] = { 0x2c0, BIT(29) }, From a27b49b8afd41d53ab2429ebb122b78a4201fa0d Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Mon, 17 Apr 2017 18:34:49 +0800 Subject: [PATCH 0016/1065] ARM: sunxi: h3/h5: fix the compatible of R_CCU The R_CCU of H3/H5 currently wrongly used A64 R_CCU compatible. Fix it by changing it to the correct H3 compatible. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 1aeeacb3a884..d0067fec99de 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -558,7 +558,7 @@ }; r_ccu: clock@1f01400 { - compatible = "allwinner,sun50i-a64-r-ccu"; + compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; clocks = <&osc24M>, <&osc32k>, <&iosc>; clock-names = "hosc", "losc", "iosc"; From ab1b732d53c18f26f51cad49371be3244fe67504 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Thu, 4 May 2017 14:09:10 +0530 Subject: [PATCH 0017/1065] ASoC: Intel: Skylake: Move i915 registration to worker thread The i915 component framework expects the caller to be invoking snd_hdac_i915_init() from a thread context. Otherwise it results in lockups on drm side. So move the registering of component interface and probing of codecs on this bus to a worker thread. init_failed in skl structure is not used currently, so renamed to init_done and used to track the initialization done in worker thread. Reported-by: Imre Deak Signed-off-by: Vinod Koul Signed-off-by: Sodhi, VunnyX Signed-off-by: Subhransu S. Prusty Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 162 ++++++++++++++++++---------------- sound/soc/intel/skylake/skl.h | 4 +- 2 files changed, 91 insertions(+), 75 deletions(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 6df3b317a476..4c9b5781282b 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -410,7 +410,7 @@ static int skl_free(struct hdac_ext_bus *ebus) struct skl *skl = ebus_to_skl(ebus); struct hdac_bus *bus = ebus_to_hbus(ebus); - skl->init_failed = 1; /* to be sure */ + skl->init_done = 0; /* to be sure */ snd_hdac_ext_stop_streams(ebus); @@ -428,8 +428,10 @@ static int skl_free(struct hdac_ext_bus *ebus) snd_hdac_ext_bus_exit(ebus); + cancel_work_sync(&skl->probe_work); if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) snd_hdac_i915_exit(&ebus->bus); + return 0; } @@ -566,6 +568,84 @@ static const struct hdac_bus_ops bus_core_ops = { .get_response = snd_hdac_bus_get_response, }; +static int skl_i915_init(struct hdac_bus *bus) +{ + int err; + + /* + * The HDMI codec is in GPU so we need to ensure that it is powered + * up and ready for probe + */ + err = snd_hdac_i915_init(bus); + if (err < 0) + return err; + + err = snd_hdac_display_power(bus, true); + if (err < 0) + dev_err(bus->dev, "Cannot turn on display power on i915\n"); + + return err; +} + +static void skl_probe_work(struct work_struct *work) +{ + struct skl *skl = container_of(work, struct skl, probe_work); + struct hdac_ext_bus *ebus = &skl->ebus; + struct hdac_bus *bus = ebus_to_hbus(ebus); + struct hdac_ext_link *hlink = NULL; + int err; + + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { + err = skl_i915_init(bus); + if (err < 0) + return; + } + + err = skl_init_chip(bus, true); + if (err < 0) { + dev_err(bus->dev, "Init chip failed with err: %d\n", err); + goto out_err; + } + + /* codec detection */ + if (!bus->codec_mask) + dev_info(bus->dev, "no hda codecs found!\n"); + + /* create codec instances */ + err = skl_codec_create(ebus); + if (err < 0) + goto out_err; + + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { + err = snd_hdac_display_power(bus, false); + if (err < 0) { + dev_err(bus->dev, "Cannot turn off display power on i915\n"); + return; + } + } + + /* register platform dai and controls */ + err = skl_platform_register(bus->dev); + if (err < 0) + return; + /* + * we are done probing so decrement link counts + */ + list_for_each_entry(hlink, &ebus->hlink_list, list) + snd_hdac_ext_bus_link_put(ebus, hlink); + + /* configure PM */ + pm_runtime_put_noidle(bus->dev); + pm_runtime_allow(bus->dev); + skl->init_done = 1; + + return; + +out_err: + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) + err = snd_hdac_display_power(bus, false); +} + /* * constructor */ @@ -593,6 +673,7 @@ static int skl_create(struct pci_dev *pci, snd_hdac_ext_bus_init(ebus, &pci->dev, &bus_core_ops, io_ops); ebus->bus.use_posbuf = 1; skl->pci = pci; + INIT_WORK(&skl->probe_work, skl_probe_work); ebus->bus.bdl_pos_adj = 0; @@ -601,27 +682,6 @@ static int skl_create(struct pci_dev *pci, return 0; } -static int skl_i915_init(struct hdac_bus *bus) -{ - int err; - - /* - * The HDMI codec is in GPU so we need to ensure that it is powered - * up and ready for probe - */ - err = snd_hdac_i915_init(bus); - if (err < 0) - return err; - - err = snd_hdac_display_power(bus, true); - if (err < 0) { - dev_err(bus->dev, "Cannot turn on display power on i915\n"); - return err; - } - - return err; -} - static int skl_first_init(struct hdac_ext_bus *ebus) { struct skl *skl = ebus_to_skl(ebus); @@ -684,20 +744,7 @@ static int skl_first_init(struct hdac_ext_bus *ebus) /* initialize chip */ skl_init_pci(skl); - if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { - err = skl_i915_init(bus); - if (err < 0) - return err; - } - - skl_init_chip(bus, true); - - /* codec detection */ - if (!bus->codec_mask) { - dev_info(bus->dev, "no hda codecs found!\n"); - } - - return 0; + return skl_init_chip(bus, true); } static int skl_probe(struct pci_dev *pci, @@ -706,7 +753,6 @@ static int skl_probe(struct pci_dev *pci, struct skl *skl; struct hdac_ext_bus *ebus = NULL; struct hdac_bus *bus = NULL; - struct hdac_ext_link *hlink = NULL; int err; /* we use ext core ops, so provide NULL for ops here */ @@ -729,7 +775,7 @@ static int skl_probe(struct pci_dev *pci, if (skl->nhlt == NULL) { err = -ENODEV; - goto out_display_power_off; + goto out_free; } err = skl_nhlt_create_sysfs(skl); @@ -760,56 +806,24 @@ static int skl_probe(struct pci_dev *pci, if (bus->mlcap) snd_hdac_ext_bus_get_ml_capabilities(ebus); + snd_hdac_bus_stop_chip(bus); + /* create device for soc dmic */ err = skl_dmic_device_register(skl); if (err < 0) goto out_dsp_free; - /* register platform dai and controls */ - err = skl_platform_register(bus->dev); - if (err < 0) - goto out_dmic_free; - - /* create codec instances */ - err = skl_codec_create(ebus); - if (err < 0) - goto out_unregister; - - if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { - err = snd_hdac_display_power(bus, false); - if (err < 0) { - dev_err(bus->dev, "Cannot turn off display power on i915\n"); - return err; - } - } - - /* - * we are done probling so decrement link counts - */ - list_for_each_entry(hlink, &ebus->hlink_list, list) - snd_hdac_ext_bus_link_put(ebus, hlink); - - /* configure PM */ - pm_runtime_put_noidle(bus->dev); - pm_runtime_allow(bus->dev); + schedule_work(&skl->probe_work); return 0; -out_unregister: - skl_platform_unregister(bus->dev); -out_dmic_free: - skl_dmic_device_unregister(skl); out_dsp_free: skl_free_dsp(skl); out_mach_free: skl_machine_device_unregister(skl); out_nhlt_free: skl_nhlt_free(skl->nhlt); -out_display_power_off: - if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) - snd_hdac_display_power(bus, false); out_free: - skl->init_failed = 1; skl_free(ebus); return err; @@ -828,7 +842,7 @@ static void skl_shutdown(struct pci_dev *pci) skl = ebus_to_skl(ebus); - if (skl->init_failed) + if (!skl->init_done) return; snd_hdac_ext_stop_streams(ebus); diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index a454f6035f3e..2a630fcb7f08 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -46,7 +46,7 @@ struct skl { struct hdac_ext_bus ebus; struct pci_dev *pci; - unsigned int init_failed:1; /* delayed init failed */ + unsigned int init_done:1; /* delayed init status */ struct platform_device *dmic_dev; struct platform_device *i2s_dev; struct snd_soc_platform *platform; @@ -64,6 +64,8 @@ struct skl { const struct firmware *tplg; int supend_active; + + struct work_struct probe_work; }; #define skl_to_ebus(s) (&(s)->ebus) From fe0dfd6358a17c79bd7d6996af7512ba452a7059 Mon Sep 17 00:00:00 2001 From: Yifeng Li Date: Thu, 4 May 2017 01:34:14 +0800 Subject: [PATCH 0018/1065] rt286: add Thinkpad Helix 2 to force_combo_jack_table Thinkpad Helix 2 is a tablet PC, the audio is powered by Core M broadwell-audio and rt286 codec. For all versions of Linux kernel, the stereo output doesn't work properly when earphones are plugged in, the sound was coming out from both channels even if the audio contains only the left or right channel. Furthermore, if a music recorded in stereo is played, the two channels cancle out each other out, as a result, no voice but only distorted background music can be heard, like a sound card with builtin a Karaoke sount effect. Apparently this tablet uses a combo jack with polarity incorrectly set by rt286 driver. This patch adds DMI information of Thinkpad Helix 2 to force_combo_jack_table[] and the issue is resolved. The microphone input doesn't work regardless to the presence of this patch and still needs help from other developers to investigate. This is my first patch to LKML directly, sorry for CC-ing too many people here. Link: https://bugzilla.kernel.org/show_bug.cgi?id=93841 Signed-off-by: Yifeng Li Signed-off-by: Mark Brown --- sound/soc/codecs/rt286.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c index 9c365a7f758d..7899a2cdeb42 100644 --- a/sound/soc/codecs/rt286.c +++ b/sound/soc/codecs/rt286.c @@ -1108,6 +1108,13 @@ static const struct dmi_system_id force_combo_jack_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Kabylake Client platform") } }, + { + .ident = "Thinkpad Helix 2nd", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Helix 2nd") + } + }, { } }; From 14f814fbedd749992476bb365b454b2170b3b225 Mon Sep 17 00:00:00 2001 From: Adam Thomson Date: Wed, 3 May 2017 16:15:53 +0100 Subject: [PATCH 0019/1065] ASoC: da7213: Fix incorrect usage of bitwise '&' operator for SRM check In the SRM lock check section of code the '&' bitwise operator is used as part of checking lock status. Functionally the code works as intended, but the conditional statement is a boolean comparison so should really use '&&' logical operator instead. This commit rectifies this discrepancy. Signed-off-by: Adam Thomson Signed-off-by: Mark Brown --- sound/soc/codecs/da7213.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index 6dd7578f0bb8..024d83fa6a7f 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -772,7 +772,7 @@ static int da7213_dai_event(struct snd_soc_dapm_widget *w, ++i; msleep(50); } - } while ((i < DA7213_SRM_CHECK_RETRIES) & (!srm_lock)); + } while ((i < DA7213_SRM_CHECK_RETRIES) && (!srm_lock)); if (!srm_lock) dev_warn(codec->dev, "SRM failed to lock\n"); From eb8df543e444492328f506adffc7dfe94111f1bd Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 5 May 2017 11:57:44 +0200 Subject: [PATCH 0020/1065] dmaengine: mv_xor_v2: handle mv_xor_v2_prep_sw_desc() error properly The mv_xor_v2_prep_sw_desc() is called from a few different places in the driver, but we never take into account the fact that it might return NULL. This commit fixes that, ensuring that we don't panic if there are no more descriptors available. Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver") Cc: Signed-off-by: Thomas Petazzoni Signed-off-by: Vinod Koul --- drivers/dma/mv_xor_v2.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c index a28a01fcba67..e9280207ac19 100644 --- a/drivers/dma/mv_xor_v2.c +++ b/drivers/dma/mv_xor_v2.c @@ -389,6 +389,8 @@ mv_xor_v2_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, __func__, len, &src, &dest, flags); sw_desc = mv_xor_v2_prep_sw_desc(xor_dev); + if (!sw_desc) + return NULL; sw_desc->async_tx.flags = flags; @@ -443,6 +445,8 @@ mv_xor_v2_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src, __func__, src_cnt, len, &dest, flags); sw_desc = mv_xor_v2_prep_sw_desc(xor_dev); + if (!sw_desc) + return NULL; sw_desc->async_tx.flags = flags; @@ -491,6 +495,8 @@ mv_xor_v2_prep_dma_interrupt(struct dma_chan *chan, unsigned long flags) container_of(chan, struct mv_xor_v2_device, dmachan); sw_desc = mv_xor_v2_prep_sw_desc(xor_dev); + if (!sw_desc) + return NULL; /* set the HW descriptor */ hw_descriptor = &sw_desc->hw_desc; From 2aab4e18152cd30cb5d2f4c27629fc8a04aed979 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 5 May 2017 11:57:45 +0200 Subject: [PATCH 0021/1065] dmaengine: mv_xor_v2: properly handle wrapping in the array of HW descriptors mv_xor_v2_tasklet() is looping over completed HW descriptors. Before the loop, it initializes 'next_pending_hw_desc' to the first HW descriptor to handle, and then the loop simply increments this point, without taking care of wrapping when we reach the last HW descriptor. The 'pending_ptr' index was being wrapped back to 0 at the end, but it wasn't used in each iteration of the loop to calculate next_pending_hw_desc. This commit fixes that, and makes next_pending_hw_desc a variable local to the loop itself. Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver") Cc: Signed-off-by: Thomas Petazzoni Signed-off-by: Vinod Koul --- drivers/dma/mv_xor_v2.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c index e9280207ac19..bdfb36ecff81 100644 --- a/drivers/dma/mv_xor_v2.c +++ b/drivers/dma/mv_xor_v2.c @@ -560,7 +560,6 @@ static void mv_xor_v2_tasklet(unsigned long data) { struct mv_xor_v2_device *xor_dev = (struct mv_xor_v2_device *) data; int pending_ptr, num_of_pending, i; - struct mv_xor_v2_descriptor *next_pending_hw_desc = NULL; struct mv_xor_v2_sw_desc *next_pending_sw_desc = NULL; dev_dbg(xor_dev->dmadev.dev, "%s %d\n", __func__, __LINE__); @@ -568,17 +567,10 @@ static void mv_xor_v2_tasklet(unsigned long data) /* get the pending descriptors parameters */ num_of_pending = mv_xor_v2_get_pending_params(xor_dev, &pending_ptr); - /* next HW descriptor */ - next_pending_hw_desc = xor_dev->hw_desq_virt + pending_ptr; - /* loop over free descriptors */ for (i = 0; i < num_of_pending; i++) { - - if (pending_ptr > MV_XOR_V2_DESC_NUM) - pending_ptr = 0; - - if (next_pending_sw_desc != NULL) - next_pending_hw_desc++; + struct mv_xor_v2_descriptor *next_pending_hw_desc = + xor_dev->hw_desq_virt + pending_ptr; /* get the SW descriptor related to the HW descriptor */ next_pending_sw_desc = @@ -614,6 +606,8 @@ static void mv_xor_v2_tasklet(unsigned long data) /* increment the next descriptor */ pending_ptr++; + if (pending_ptr >= MV_XOR_V2_DESC_NUM) + pending_ptr = 0; } if (num_of_pending != 0) { From bc473da1ed726c975ad47f8d7d27631de11356d8 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 5 May 2017 11:57:46 +0200 Subject: [PATCH 0022/1065] dmaengine: mv_xor_v2: do not use descriptors not acked by async_tx Descriptors that have not been acknowledged by the async_tx layer should not be re-used, so this commit adjusts the implementation of mv_xor_v2_prep_sw_desc() to skip descriptors for which async_tx_test_ack() is false. Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver") Cc: Signed-off-by: Thomas Petazzoni Signed-off-by: Vinod Koul --- drivers/dma/mv_xor_v2.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c index bdfb36ecff81..cb60e7c4aa16 100644 --- a/drivers/dma/mv_xor_v2.c +++ b/drivers/dma/mv_xor_v2.c @@ -344,6 +344,7 @@ static struct mv_xor_v2_sw_desc * mv_xor_v2_prep_sw_desc(struct mv_xor_v2_device *xor_dev) { struct mv_xor_v2_sw_desc *sw_desc; + bool found = false; /* Lock the channel */ spin_lock_bh(&xor_dev->lock); @@ -355,19 +356,23 @@ mv_xor_v2_prep_sw_desc(struct mv_xor_v2_device *xor_dev) return NULL; } - /* get a free SW descriptor from the SW DESQ */ - sw_desc = list_first_entry(&xor_dev->free_sw_desc, - struct mv_xor_v2_sw_desc, free_list); + list_for_each_entry(sw_desc, &xor_dev->free_sw_desc, free_list) { + if (async_tx_test_ack(&sw_desc->async_tx)) { + found = true; + break; + } + } + + if (!found) { + spin_unlock_bh(&xor_dev->lock); + return NULL; + } + list_del(&sw_desc->free_list); /* Release the channel */ spin_unlock_bh(&xor_dev->lock); - /* set the async tx descriptor */ - dma_async_tx_descriptor_init(&sw_desc->async_tx, &xor_dev->dmachan); - sw_desc->async_tx.tx_submit = mv_xor_v2_tx_submit; - async_tx_ack(&sw_desc->async_tx); - return sw_desc; } @@ -785,8 +790,15 @@ static int mv_xor_v2_probe(struct platform_device *pdev) /* add all SW descriptors to the free list */ for (i = 0; i < MV_XOR_V2_DESC_NUM; i++) { - xor_dev->sw_desq[i].idx = i; - list_add(&xor_dev->sw_desq[i].free_list, + struct mv_xor_v2_sw_desc *sw_desc = + xor_dev->sw_desq + i; + sw_desc->idx = i; + dma_async_tx_descriptor_init(&sw_desc->async_tx, + &xor_dev->dmachan); + sw_desc->async_tx.tx_submit = mv_xor_v2_tx_submit; + async_tx_ack(&sw_desc->async_tx); + + list_add(&sw_desc->free_list, &xor_dev->free_sw_desc); } From ab2c5f0a77fe49bdb6e307b397496373cb47d2c2 Mon Sep 17 00:00:00 2001 From: Hanna Hawa Date: Fri, 5 May 2017 11:57:47 +0200 Subject: [PATCH 0023/1065] dmaengine: mv_xor_v2: enable XOR engine after its configuration The engine was enabled prior to its configuration, which isn't correct. This patch relocates the activation of the XOR engine, to be after the configuration of the XOR engine. Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver") Cc: Signed-off-by: Hanna Hawa Signed-off-by: Thomas Petazzoni Signed-off-by: Vinod Koul --- drivers/dma/mv_xor_v2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c index cb60e7c4aa16..211b8c0e3cfb 100644 --- a/drivers/dma/mv_xor_v2.c +++ b/drivers/dma/mv_xor_v2.c @@ -653,9 +653,6 @@ static int mv_xor_v2_descq_init(struct mv_xor_v2_device *xor_dev) writel((xor_dev->hw_desq & 0xFFFF00000000) >> 32, xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_BAHR_OFF); - /* enable the DMA engine */ - writel(0, xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_STOP_OFF); - /* * This is a temporary solution, until we activate the * SMMU. Set the attributes for reading & writing data buffers @@ -699,6 +696,9 @@ static int mv_xor_v2_descq_init(struct mv_xor_v2_device *xor_dev) reg |= MV_XOR_V2_GLOB_PAUSE_AXI_TIME_DIS_VAL; writel(reg, xor_dev->glob_base + MV_XOR_V2_GLOB_PAUSE); + /* enable the DMA engine */ + writel(0, xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_STOP_OFF); + return 0; } From 44d5887a8bf1e86915c8ff647337cb138149da82 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 5 May 2017 11:57:48 +0200 Subject: [PATCH 0024/1065] dmaengine: mv_xor_v2: fix tx_submit() implementation The mv_xor_v2_tx_submit() gets the next available HW descriptor by calling mv_xor_v2_get_desq_write_ptr(), which reads a HW register telling the next available HW descriptor. This was working fine when HW descriptors were issued for processing directly in tx_submit(). However, as part of the review process of the driver, a change was requested to move the actual kick-off of HW descriptors processing to ->issue_pending(). Due to this, reading the HW register to know the next available HW descriptor no longer works. So instead of using this HW register, we implemented a software index pointing to the next available HW descriptor. Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver") Cc: Signed-off-by: Thomas Petazzoni Signed-off-by: Vinod Koul --- drivers/dma/mv_xor_v2.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-) diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c index 211b8c0e3cfb..4684eceea759 100644 --- a/drivers/dma/mv_xor_v2.c +++ b/drivers/dma/mv_xor_v2.c @@ -161,6 +161,7 @@ struct mv_xor_v2_device { struct mv_xor_v2_sw_desc *sw_desq; int desc_size; unsigned int npendings; + unsigned int hw_queue_idx; }; /** @@ -213,18 +214,6 @@ static void mv_xor_v2_set_data_buffers(struct mv_xor_v2_device *xor_dev, } } -/* - * Return the next available index in the DESQ. - */ -static int mv_xor_v2_get_desq_write_ptr(struct mv_xor_v2_device *xor_dev) -{ - /* read the index for the next available descriptor in the DESQ */ - u32 reg = readl(xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_ALLOC_OFF); - - return ((reg >> MV_XOR_V2_DMA_DESQ_ALLOC_WRPTR_SHIFT) - & MV_XOR_V2_DMA_DESQ_ALLOC_WRPTR_MASK); -} - /* * notify the engine of new descriptors, and update the available index. */ @@ -306,7 +295,6 @@ static irqreturn_t mv_xor_v2_interrupt_handler(int irq, void *data) static dma_cookie_t mv_xor_v2_tx_submit(struct dma_async_tx_descriptor *tx) { - int desq_ptr; void *dest_hw_desc; dma_cookie_t cookie; struct mv_xor_v2_sw_desc *sw_desc = @@ -322,15 +310,15 @@ mv_xor_v2_tx_submit(struct dma_async_tx_descriptor *tx) spin_lock_bh(&xor_dev->lock); cookie = dma_cookie_assign(tx); - /* get the next available slot in the DESQ */ - desq_ptr = mv_xor_v2_get_desq_write_ptr(xor_dev); - /* copy the HW descriptor from the SW descriptor to the DESQ */ - dest_hw_desc = xor_dev->hw_desq_virt + desq_ptr; + dest_hw_desc = xor_dev->hw_desq_virt + xor_dev->hw_queue_idx; memcpy(dest_hw_desc, &sw_desc->hw_desc, xor_dev->desc_size); xor_dev->npendings++; + xor_dev->hw_queue_idx++; + if (xor_dev->hw_queue_idx >= MV_XOR_V2_DESC_NUM) + xor_dev->hw_queue_idx = 0; spin_unlock_bh(&xor_dev->lock); From 9dd4f319bac25334a869d9276b19eac9e478fd33 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 5 May 2017 11:57:49 +0200 Subject: [PATCH 0025/1065] dmaengine: mv_xor_v2: remove interrupt coalescing The current implementation of interrupt coalescing doesn't work, because it doesn't configure the coalescing timer, which is needed to make sure we get an interrupt at some point. As a fix for stable, we simply remove the interrupt coalescing functionality. It will be re-introduced properly in a future commit. Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver") Cc: Signed-off-by: Thomas Petazzoni Signed-off-by: Vinod Koul --- drivers/dma/mv_xor_v2.c | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c index 4684eceea759..b133fe29d788 100644 --- a/drivers/dma/mv_xor_v2.c +++ b/drivers/dma/mv_xor_v2.c @@ -246,22 +246,6 @@ static int mv_xor_v2_set_desc_size(struct mv_xor_v2_device *xor_dev) return MV_XOR_V2_EXT_DESC_SIZE; } -/* - * Set the IMSG threshold - */ -static inline -void mv_xor_v2_set_imsg_thrd(struct mv_xor_v2_device *xor_dev, int thrd_val) -{ - u32 reg; - - reg = readl(xor_dev->dma_base + MV_XOR_V2_DMA_IMSG_THRD_OFF); - - reg &= (~MV_XOR_V2_DMA_IMSG_THRD_MASK << MV_XOR_V2_DMA_IMSG_THRD_SHIFT); - reg |= (thrd_val << MV_XOR_V2_DMA_IMSG_THRD_SHIFT); - - writel(reg, xor_dev->dma_base + MV_XOR_V2_DMA_IMSG_THRD_OFF); -} - static irqreturn_t mv_xor_v2_interrupt_handler(int irq, void *data) { struct mv_xor_v2_device *xor_dev = data; @@ -277,12 +261,6 @@ static irqreturn_t mv_xor_v2_interrupt_handler(int irq, void *data) if (!ndescs) return IRQ_NONE; - /* - * Update IMSG threshold, to disable new IMSG interrupts until - * end of the tasklet - */ - mv_xor_v2_set_imsg_thrd(xor_dev, MV_XOR_V2_DESC_NUM); - /* schedule a tasklet to handle descriptors callbacks */ tasklet_schedule(&xor_dev->irq_tasklet); @@ -607,9 +585,6 @@ static void mv_xor_v2_tasklet(unsigned long data) /* free the descriptores */ mv_xor_v2_free_desc_from_desq(xor_dev, num_of_pending); } - - /* Update IMSG threshold, to enable new IMSG interrupts */ - mv_xor_v2_set_imsg_thrd(xor_dev, 0); } /* From b2d3c270f9f2fb82518ac500a9849c3aaf503852 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 5 May 2017 11:57:50 +0200 Subject: [PATCH 0026/1065] dmaengine: mv_xor_v2: set DMA mask to 40 bits The XORv2 engine on Armada 7K/8K can only access the first 40 bits of the physical address space, so the DMA mask must be set accordingly. Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver") Cc: Signed-off-by: Thomas Petazzoni Signed-off-by: Vinod Koul --- drivers/dma/mv_xor_v2.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c index b133fe29d788..f3e211f8f6c5 100644 --- a/drivers/dma/mv_xor_v2.c +++ b/drivers/dma/mv_xor_v2.c @@ -693,6 +693,10 @@ static int mv_xor_v2_probe(struct platform_device *pdev) platform_set_drvdata(pdev, xor_dev); + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40)); + if (ret) + return ret; + xor_dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(xor_dev->clk) && PTR_ERR(xor_dev->clk) == -EPROBE_DEFER) return -EPROBE_DEFER; From 5ba5b437efaa7a502eec393c045d3bf90c92c4e9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 10 May 2017 08:51:09 +0300 Subject: [PATCH 0027/1065] iio: adc: ti_am335x_adc: allocating too much in probe We should be allocating enough information for a tiadc_device struct which is about 400 bytes but instead we allocate enough for a second iio_dev struct which is over 2000 bytes. Fixes: fea89e2dfcea ("iio: adc: ti_am335x_adc: use variable names for sizeof() operator") Signed-off-by: Dan Carpenter Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti_am335x_adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 4282ceca3d8f..6cbed7eb118a 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -614,7 +614,7 @@ static int tiadc_probe(struct platform_device *pdev) return -EINVAL; } - indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*indio_dev)); + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev)); if (indio_dev == NULL) { dev_err(&pdev->dev, "failed to allocate iio device\n"); return -ENOMEM; From c54517196811b0561079833c147083ab2c9cc5e1 Mon Sep 17 00:00:00 2001 From: Jacopo Mondi Date: Tue, 9 May 2017 09:57:57 +0200 Subject: [PATCH 0028/1065] iio: adc: max9611: Fix attribute measure unit The power and current "shunt-resistor" attribute's 'show' function displays the resistor value in milli-Ohms, while the ABI description specifies it should be displayed in Ohms. Fix it. Reported-by: Geert Uytterhoeven Signed-off-by: Jacopo Mondi Tested-by: Geert Uytterhoeven Signed-off-by: Jonathan Cameron --- drivers/iio/adc/max9611.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c index dc3869bf3248..b0526e4b9530 100644 --- a/drivers/iio/adc/max9611.c +++ b/drivers/iio/adc/max9611.c @@ -438,10 +438,10 @@ static ssize_t max9611_shunt_resistor_show(struct device *dev, struct max9611_dev *max9611 = iio_priv(dev_to_iio_dev(dev)); unsigned int i, r; - i = max9611->shunt_resistor_uohm / 1000; - r = max9611->shunt_resistor_uohm % 1000; + i = max9611->shunt_resistor_uohm / 1000000; + r = max9611->shunt_resistor_uohm % 1000000; - return sprintf(buf, "%u.%03u\n", i, r); + return sprintf(buf, "%u.%06u\n", i, r); } static IIO_DEVICE_ATTR(in_power_shunt_resistor, 0444, From 72d42504bd7faa6de1c1644b5e46652933e040a6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 May 2017 13:34:29 +0200 Subject: [PATCH 0029/1065] ovl: select EXPORTFS We get a link error when EXPORTFS is not enabled: ERROR: "exportfs_encode_fh" [fs/overlayfs/overlay.ko] undefined! ERROR: "exportfs_decode_fh" [fs/overlayfs/overlay.ko] undefined! This adds a Kconfig 'select' statement for overlayfs, the same way that it is done for the other users of exportfs. Fixes: 3a1e819b4e80 ("ovl: store file handle of lower inode on copy up") Signed-off-by: Arnd Bergmann Signed-off-by: Miklos Szeredi --- fs/overlayfs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/overlayfs/Kconfig b/fs/overlayfs/Kconfig index 0daac5112f7a..c0c9683934b7 100644 --- a/fs/overlayfs/Kconfig +++ b/fs/overlayfs/Kconfig @@ -1,5 +1,6 @@ config OVERLAY_FS tristate "Overlay filesystem support" + select EXPORTFS help An overlay filesystem combines two filesystems - an 'upper' filesystem and a 'lower' filesystem. When a name exists in both filesystems, the From 41b80bb1db5c4c547cf187d1bc0c6c6feb7c14af Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 19 Apr 2017 19:48:07 +0200 Subject: [PATCH 0030/1065] memory: atmel-ebi: mark PM ops as __maybe_unused We get a harmless warning without CONFIG_PM: drivers/memory/atmel-ebi.c:584:12: error: 'atmel_ebi_resume' defined but not used [-Werror=unused-function] Marking the function as __maybe_unused does the right thing here and drops it silently when unused. Fixes: a483fb10e5ea ("memory: atmel-ebi: Add PM ops") Signed-off-by: Arnd Bergmann Signed-off-by: Alexandre Belloni --- drivers/memory/atmel-ebi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c index 35910f945bfa..99e644cda4d1 100644 --- a/drivers/memory/atmel-ebi.c +++ b/drivers/memory/atmel-ebi.c @@ -581,7 +581,7 @@ static int atmel_ebi_probe(struct platform_device *pdev) return of_platform_populate(np, NULL, NULL, dev); } -static int atmel_ebi_resume(struct device *dev) +static __maybe_unused int atmel_ebi_resume(struct device *dev) { struct atmel_ebi *ebi = dev_get_drvdata(dev); struct atmel_ebi_dev *ebid; From b0804ed0cadd7e38d94d2f15cdcc0d9695818856 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Tue, 9 May 2017 10:04:30 +0100 Subject: [PATCH 0031/1065] ARM: dts: bcm283x: Reserve first page for firmware The Raspberry Pi startup stub files for multi-core BCM283X processors make the secondary CPUs spin until the corresponding mailbox is written. These stubs are loaded at physical address 0x00000xxx (as seen by the ARMs), but this page will be reused by the kernel unless it is explicitly reserved, causing the waiting cores to execute random code. Use the /memreserve/ Device Tree directive to mark the first page as off-limits to the kernel. See: https://github.com/raspberrypi/linux/issues/1989 Signed-off-by: Phil Elwell Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt --- arch/arm/boot/dts/bcm283x.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 35cea3fcaf5c..1ac7c0dc6577 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -3,6 +3,11 @@ #include #include +/* firmware-provided startup stubs live here, where the secondary CPUs are + * spinning. + */ +/memreserve/ 0x00000000 0x00001000; + /* This include file covers the common peripherals and configuration between * bcm2835 and bcm2836 implementations, leaving the CPU configuration to * bcm2835.dtsi and bcm2836.dtsi. From 98883f1b5415ea9dce60d5178877d15f4faa10b8 Mon Sep 17 00:00:00 2001 From: "Bryant G. Ly" Date: Tue, 9 May 2017 11:50:26 -0500 Subject: [PATCH 0032/1065] ibmvscsis: Clear left-over abort_cmd pointers With the addition of ibmvscsis->abort_cmd pointer within commit 25e78531268e ("ibmvscsis: Do not send aborted task response"), make sure to explicitly NULL these pointers when clearing DELAY_SEND flag. Do this for two cases, when getting the new new ibmvscsis descriptor in ibmvscsis_get_free_cmd() and before posting the response completion in ibmvscsis_send_messages(). Signed-off-by: Bryant G. Ly Reviewed-by: Michael Cyr Cc: # v4.8+ Signed-off-by: Nicholas Bellinger --- drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c index d390325c99ec..ee64241865e6 100644 --- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c +++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c @@ -1170,6 +1170,8 @@ static struct ibmvscsis_cmd *ibmvscsis_get_free_cmd(struct scsi_info *vscsi) cmd = list_first_entry_or_null(&vscsi->free_cmd, struct ibmvscsis_cmd, list); if (cmd) { + if (cmd->abort_cmd) + cmd->abort_cmd = NULL; cmd->flags &= ~(DELAY_SEND); list_del(&cmd->list); cmd->iue = iue; @@ -1774,6 +1776,7 @@ static void ibmvscsis_send_messages(struct scsi_info *vscsi) if (cmd->abort_cmd) { retry = true; cmd->abort_cmd->flags &= ~(DELAY_SEND); + cmd->abort_cmd = NULL; } /* From 75dbf2d36f6b122ad3c1070fe4bf95f71bbff321 Mon Sep 17 00:00:00 2001 From: "Bryant G. Ly" Date: Wed, 10 May 2017 14:35:47 -0500 Subject: [PATCH 0033/1065] ibmvscsis: Fix the incorrect req_lim_delta The current code is not correctly calculating the req_lim_delta. We want to make sure vscsi->credit is always incremented when we do not send a response for the scsi op. Thus for the case where there is a successfully aborted task we need to make sure the vscsi->credit is incremented. v2 - Moves the original location of the vscsi->credit increment to a better spot. Since if we increment credit, the next command we send back will have increased req_lim_delta. But we probably shouldn't be doing that until the aborted cmd is actually released. Otherwise the client will think that it can send a new command, and we could find ourselves short of command elements. Not likely, but could happen. This patch depends on both: commit 25e78531268e ("ibmvscsis: Do not send aborted task response") commit 98883f1b5415 ("ibmvscsis: Clear left-over abort_cmd pointers") Signed-off-by: Bryant G. Ly Reviewed-by: Michael Cyr Cc: # v4.8+ Signed-off-by: Nicholas Bellinger --- drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c index ee64241865e6..abf6026645dd 100644 --- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c +++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c @@ -1791,6 +1791,25 @@ static void ibmvscsis_send_messages(struct scsi_info *vscsi) list_del(&cmd->list); ibmvscsis_free_cmd_resources(vscsi, cmd); + /* + * With a successfully aborted op + * through LIO we want to increment the + * the vscsi credit so that when we dont + * send a rsp to the original scsi abort + * op (h_send_crq), but the tm rsp to + * the abort is sent, the credit is + * correctly sent with the abort tm rsp. + * We would need 1 for the abort tm rsp + * and 1 credit for the aborted scsi op. + * Thus we need to increment here. + * Also we want to increment the credit + * here because we want to make sure + * cmd is actually released first + * otherwise the client will think it + * it can send a new cmd, and we could + * find ourselves short of cmd elements. + */ + vscsi->credit += 1; } else { iue = cmd->iue; @@ -2965,10 +2984,7 @@ static long srp_build_response(struct scsi_info *vscsi, rsp->opcode = SRP_RSP; - if (vscsi->credit > 0 && vscsi->state == SRP_PROCESSING) - rsp->req_lim_delta = cpu_to_be32(vscsi->credit); - else - rsp->req_lim_delta = cpu_to_be32(1 + vscsi->credit); + rsp->req_lim_delta = cpu_to_be32(1 + vscsi->credit); rsp->tag = cmd->rsp.tag; rsp->flags = 0; From 4ff83daa0200affe1894bd33d17bac404e3d78d4 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 11 May 2017 01:07:24 -0700 Subject: [PATCH 0034/1065] target: Re-add check to reject control WRITEs with overflow data During v4.3 when the overflow/underflow check was relaxed by commit c72c525022: commit c72c5250224d475614a00c1d7e54a67f77cd3410 Author: Roland Dreier Date: Wed Jul 22 15:08:18 2015 -0700 target: allow underflow/overflow for PR OUT etc. commands to allow underflow/overflow for Windows compliance + FCP, a consequence was to allow control CDBs to process overflow data for iscsi-target with immediate data as well. As per Roland's original change, continue to allow underflow cases for control CDBs to make Windows compliance + FCP happy, but until overflow for control CDBs is supported tree-wide, explicitly reject all control WRITEs with overflow following pre v4.3.y logic. Reported-by: Bart Van Assche Cc: Roland Dreier Cc: # v4.3+ Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 37f57357d4a0..6025935036c9 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1160,15 +1160,28 @@ target_cmd_size_check(struct se_cmd *cmd, unsigned int size) if (cmd->unknown_data_length) { cmd->data_length = size; } else if (size != cmd->data_length) { - pr_warn("TARGET_CORE[%s]: Expected Transfer Length:" + pr_warn_ratelimited("TARGET_CORE[%s]: Expected Transfer Length:" " %u does not match SCSI CDB Length: %u for SAM Opcode:" " 0x%02x\n", cmd->se_tfo->get_fabric_name(), cmd->data_length, size, cmd->t_task_cdb[0]); - if (cmd->data_direction == DMA_TO_DEVICE && - cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) { - pr_err("Rejecting underflow/overflow WRITE data\n"); - return TCM_INVALID_CDB_FIELD; + if (cmd->data_direction == DMA_TO_DEVICE) { + if (cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) { + pr_err_ratelimited("Rejecting underflow/overflow" + " for WRITE data CDB\n"); + return TCM_INVALID_CDB_FIELD; + } + /* + * Some fabric drivers like iscsi-target still expect to + * always reject overflow writes. Reject this case until + * full fabric driver level support for overflow writes + * is introduced tree-wide. + */ + if (size > cmd->data_length) { + pr_err_ratelimited("Rejecting overflow for" + " WRITE control CDB\n"); + return TCM_INVALID_CDB_FIELD; + } } /* * Reject READ_* or WRITE_* with overflow/underflow for From 9a445bbb1607d9f14556a532453dd86d1b7e381e Mon Sep 17 00:00:00 2001 From: Hiroyuki Yokoyama Date: Mon, 15 May 2017 17:49:52 +0900 Subject: [PATCH 0035/1065] dmaengine: usb-dmac: Fix DMAOR AE bit definition This patch fixes the register definition of AE (Address Error flag) bit. Fixes: 0c1c8ff32fa2 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver") Cc: # v4.1+ Signed-off-by: Hiroyuki Yokoyama [Shimoda: add Fixes and Cc tags in the commit log] Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Signed-off-by: Vinod Koul --- drivers/dma/sh/usb-dmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c index 72c649713ace..31a145154e9f 100644 --- a/drivers/dma/sh/usb-dmac.c +++ b/drivers/dma/sh/usb-dmac.c @@ -117,7 +117,7 @@ struct usb_dmac { #define USB_DMASWR 0x0008 #define USB_DMASWR_SWR (1 << 0) #define USB_DMAOR 0x0060 -#define USB_DMAOR_AE (1 << 2) +#define USB_DMAOR_AE (1 << 1) #define USB_DMAOR_DME (1 << 0) #define USB_DMASAR 0x0000 From dbed87a9d3a857a86f602775b5845f5f6d9652b5 Mon Sep 17 00:00:00 2001 From: Tobias Regnery Date: Mon, 24 Apr 2017 12:05:42 +0200 Subject: [PATCH 0036/1065] clk: meson: gxbb: fix build error without RESET_CONTROLLER With CONFIG_RESET_CONTROLLER=n we see the following link error in the meson gxbb clk driver: drivers/built-in.o: In function 'gxbb_aoclkc_probe': drivers/clk/meson/gxbb-aoclk.c:161: undefined reference to 'devm_reset_controller_register' Fix this by selecting the reset controller subsystem. Fixes: f8c11f79912d ("clk: meson: Add GXBB AO Clock and Reset controller driver") Signed-off-by: Tobias Regnery Acked-by: Neil Armstrong [narmstrong: Added fixes-by tag] Signed-off-by: Neil Armstrong --- drivers/clk/meson/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index 19480bcc7046..2f29ee1a4d00 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -14,6 +14,7 @@ config COMMON_CLK_MESON8B config COMMON_CLK_GXBB bool depends on COMMON_CLK_AMLOGIC + select RESET_CONTROLLER help Support for the clock controller on AmLogic S905 devices, aka gxbb. Say Y if you want peripherals and CPU frequency scaling to work. From 4751832da990a927c37526ae67b9226ea01eb99e Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 7 Apr 2017 10:43:15 +0800 Subject: [PATCH 0037/1065] btrfs: fiemap: Cache and merge fiemap extent before submit it to user [BUG] Cycle mount btrfs can cause fiemap to return different result. Like: # mount /dev/vdb5 /mnt/btrfs # dd if=/dev/zero bs=16K count=4 oflag=dsync of=/mnt/btrfs/file # xfs_io -c "fiemap -v" /mnt/btrfs/file /mnt/test/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 25088..25215 128 0x1 # umount /mnt/btrfs # mount /dev/vdb5 /mnt/btrfs # xfs_io -c "fiemap -v" /mnt/btrfs/file /mnt/test/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..31]: 25088..25119 32 0x0 1: [32..63]: 25120..25151 32 0x0 2: [64..95]: 25152..25183 32 0x0 3: [96..127]: 25184..25215 32 0x1 But after above fiemap, we get correct merged result if we call fiemap again. # xfs_io -c "fiemap -v" /mnt/btrfs/file /mnt/test/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 25088..25215 128 0x1 [REASON] Btrfs will try to merge extent map when inserting new extent map. btrfs_fiemap(start=0 len=(u64)-1) |- extent_fiemap(start=0 len=(u64)-1) |- get_extent_skip_holes(start=0 len=64k) | |- btrfs_get_extent_fiemap(start=0 len=64k) | |- btrfs_get_extent(start=0 len=64k) | | Found on-disk (ino, EXTENT_DATA, 0) | |- add_extent_mapping() | |- Return (em->start=0, len=16k) | |- fiemap_fill_next_extent(logic=0 phys=X len=16k) | |- get_extent_skip_holes(start=0 len=64k) | |- btrfs_get_extent_fiemap(start=0 len=64k) | |- btrfs_get_extent(start=16k len=48k) | | Found on-disk (ino, EXTENT_DATA, 16k) | |- add_extent_mapping() | | |- try_merge_map() | | Merge with previous em start=0 len=16k | | resulting em start=0 len=32k | |- Return (em->start=0, len=32K) << Merged result |- Stripe off the unrelated range (0~16K) of return em |- fiemap_fill_next_extent(logic=16K phys=X+16K len=16K) ^^^ Causing split fiemap extent. And since in add_extent_mapping(), em is already merged, in next fiemap() call, we will get merged result. [FIX] Here we introduce a new structure, fiemap_cache, which records previous fiemap extent. And will always try to merge current fiemap_cache result before calling fiemap_fill_next_extent(). Only when we failed to merge current fiemap extent with cached one, we will call fiemap_fill_next_extent() to submit cached one. So by this method, we can merge all fiemap extents. It can also be done in fs/ioctl.c, however the problem is if fieinfo->fi_extents_max == 0, we have no space to cache previous fiemap extent. So I choose to merge it in btrfs. Signed-off-by: Qu Wenruo Reviewed-by: Liu Bo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 124 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 122 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index d8da3edf2ac3..4317ed3ad830 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4377,6 +4377,123 @@ static struct extent_map *get_extent_skip_holes(struct inode *inode, return NULL; } +/* + * To cache previous fiemap extent + * + * Will be used for merging fiemap extent + */ +struct fiemap_cache { + u64 offset; + u64 phys; + u64 len; + u32 flags; + bool cached; +}; + +/* + * Helper to submit fiemap extent. + * + * Will try to merge current fiemap extent specified by @offset, @phys, + * @len and @flags with cached one. + * And only when we fails to merge, cached one will be submitted as + * fiemap extent. + * + * Return value is the same as fiemap_fill_next_extent(). + */ +static int emit_fiemap_extent(struct fiemap_extent_info *fieinfo, + struct fiemap_cache *cache, + u64 offset, u64 phys, u64 len, u32 flags) +{ + int ret = 0; + + if (!cache->cached) + goto assign; + + /* + * Sanity check, extent_fiemap() should have ensured that new + * fiemap extent won't overlap with cahced one. + * Not recoverable. + * + * NOTE: Physical address can overlap, due to compression + */ + if (cache->offset + cache->len > offset) { + WARN_ON(1); + return -EINVAL; + } + + /* + * Only merges fiemap extents if + * 1) Their logical addresses are continuous + * + * 2) Their physical addresses are continuous + * So truly compressed (physical size smaller than logical size) + * extents won't get merged with each other + * + * 3) Share same flags except FIEMAP_EXTENT_LAST + * So regular extent won't get merged with prealloc extent + */ + if (cache->offset + cache->len == offset && + cache->phys + cache->len == phys && + (cache->flags & ~FIEMAP_EXTENT_LAST) == + (flags & ~FIEMAP_EXTENT_LAST)) { + cache->len += len; + cache->flags |= flags; + goto try_submit_last; + } + + /* Not mergeable, need to submit cached one */ + ret = fiemap_fill_next_extent(fieinfo, cache->offset, cache->phys, + cache->len, cache->flags); + cache->cached = false; + if (ret) + return ret; +assign: + cache->cached = true; + cache->offset = offset; + cache->phys = phys; + cache->len = len; + cache->flags = flags; +try_submit_last: + if (cache->flags & FIEMAP_EXTENT_LAST) { + ret = fiemap_fill_next_extent(fieinfo, cache->offset, + cache->phys, cache->len, cache->flags); + cache->cached = false; + } + return ret; +} + +/* + * Sanity check for fiemap cache + * + * All fiemap cache should be submitted by emit_fiemap_extent() + * Iteration should be terminated either by last fiemap extent or + * fieinfo->fi_extents_max. + * So no cached fiemap should exist. + */ +static int check_fiemap_cache(struct btrfs_fs_info *fs_info, + struct fiemap_extent_info *fieinfo, + struct fiemap_cache *cache) +{ + int ret; + + if (!cache->cached) + return 0; + + /* Small and recoverbale problem, only to info developer */ +#ifdef CONFIG_BTRFS_DEBUG + WARN_ON(1); +#endif + btrfs_warn(fs_info, + "unhandled fiemap cache detected: offset=%llu phys=%llu len=%llu flags=0x%x", + cache->offset, cache->phys, cache->len, cache->flags); + ret = fiemap_fill_next_extent(fieinfo, cache->offset, cache->phys, + cache->len, cache->flags); + cache->cached = false; + if (ret > 0) + ret = 0; + return ret; +} + int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, __u64 start, __u64 len, get_extent_t *get_extent) { @@ -4394,6 +4511,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, struct extent_state *cached_state = NULL; struct btrfs_path *path; struct btrfs_root *root = BTRFS_I(inode)->root; + struct fiemap_cache cache = { 0 }; int end = 0; u64 em_start = 0; u64 em_len = 0; @@ -4573,8 +4691,8 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, flags |= FIEMAP_EXTENT_LAST; end = 1; } - ret = fiemap_fill_next_extent(fieinfo, em_start, disko, - em_len, flags); + ret = emit_fiemap_extent(fieinfo, &cache, em_start, disko, + em_len, flags); if (ret) { if (ret == 1) ret = 0; @@ -4582,6 +4700,8 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, } } out_free: + if (!ret) + ret = check_fiemap_cache(root->fs_info, fieinfo, &cache); free_extent_map(em); out: btrfs_free_path(path); From 8d91012528b3c95c159e6b6779e367421df9cbb5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 2 May 2017 17:03:50 +0200 Subject: [PATCH 0038/1065] btrfs: Make flush bios explicitely sync Commit b685d3d65ac7 "block: treat REQ_FUA and REQ_PREFLUSH as synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...} definitions. generic_make_request_checks() however strips REQ_FUA and REQ_PREFLUSH flags from a bio when the storage doesn't report volatile write cache and thus write effectively becomes asynchronous which can lead to performance regressions Fix the problem by making sure all bios which are synchronous are properly marked with REQ_SYNC. CC: David Sterba CC: linux-btrfs@vger.kernel.org Fixes: b685d3d65ac791406e0dfd8779cc9b3707fea5a3 Signed-off-by: Jan Kara Reviewed-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 683194242deb..b3579d11fb26 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3488,10 +3488,12 @@ static int write_dev_supers(struct btrfs_device *device, * we fua the first super. The others we allow * to go down lazy. */ - if (i == 0) - ret = btrfsic_submit_bh(REQ_OP_WRITE, REQ_FUA, bh); - else + if (i == 0) { + ret = btrfsic_submit_bh(REQ_OP_WRITE, + REQ_SYNC | REQ_FUA, bh); + } else { ret = btrfsic_submit_bh(REQ_OP_WRITE, REQ_SYNC, bh); + } if (ret) errors++; } @@ -3556,7 +3558,7 @@ static int write_dev_flush(struct btrfs_device *device, int wait) bio->bi_end_io = btrfs_end_empty_barrier; bio->bi_bdev = device->bdev; - bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH; + bio->bi_opf = REQ_OP_WRITE | REQ_SYNC | REQ_PREFLUSH; init_completion(&device->flush_wait); bio->bi_private = &device->flush_wait; device->flush_bio = bio; From bff5baf8aa37a97293725a16c03f49872249c07e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 9 May 2017 18:14:01 +0100 Subject: [PATCH 0039/1065] btrfs: fix incorrect error return ret being passed to mapping_set_error The setting of return code ret should be based on the error code passed into function end_extent_writepage and not on ret. Thanks to Liu Bo for spotting this mistake in the original fix I submitted. Detected by CoverityScan, CID#1414312 ("Logically dead code") Fixes: 5dca6eea91653e ("Btrfs: mark mapping with error flag to report errors to userspace") Signed-off-by: Colin Ian King Reviewed-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 4317ed3ad830..d3619e010005 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2458,7 +2458,7 @@ void end_extent_writepage(struct page *page, int err, u64 start, u64 end) if (!uptodate) { ClearPageUptodate(page); SetPageError(page); - ret = ret < 0 ? ret : -EIO; + ret = err < 0 ? err : -EIO; mapping_set_error(page->mapping, ret); } } From 6ceec6953efe7f371218082ddee1fe022a13e8ab Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 16 May 2017 16:54:53 +0200 Subject: [PATCH 0040/1065] MAINTAINERS: update RTC mailing list The RTC subsystem mailing list is moving to vger. Signed-off-by: Alexandre Belloni --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f7d568b8f133..b3863ec142d7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10447,7 +10447,7 @@ S: Orphan PXA RTC DRIVER M: Robert Jarzmik -L: rtc-linux@googlegroups.com +L: linux-rtc@vger.kernel.org S: Maintained QAT DRIVER @@ -10754,7 +10754,7 @@ X: kernel/torture.c REAL TIME CLOCK (RTC) SUBSYSTEM M: Alessandro Zummo M: Alexandre Belloni -L: rtc-linux@googlegroups.com +L: linux-rtc@vger.kernel.org Q: http://patchwork.ozlabs.org/project/rtc-linux/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git S: Maintained From 8bfd174312629866efa535193d9e563768ff4307 Mon Sep 17 00:00:00 2001 From: Sui Chen Date: Tue, 9 May 2017 07:47:22 -0500 Subject: [PATCH 0041/1065] ahci: Acer SA5-271 SSD Not Detected Fix (Correction in this resend: fixed function name acer_sa5_271_workaround; fixed the always-true condition in the function; fixed description.) On the Acer Switch Alpha 12 (model number: SA5-271), the internal SSD may not get detected because the port_map and CAP.nr_ports combination causes the driver to skip the port that is actually connected to the SSD. More specifically, either all SATA ports are identified as DUMMY, or all ports get ``link down'' and never get up again. This problem occurs occasionally. When this problem occurs, CAP may hold a value of 0xC734FF00 or 0xC734FF01 and port_map may hold a value of 0x00 or 0x01. When this problem does not occur, CAP holds a value of 0xC734FF02 and port_map may hold a value of 0x07. Overriding the CAP value to 0xC734FF02 and port_map to 0x7 significantly reduces the occurrence of this problem. Link: https://bugzilla.kernel.org/attachment.cgi?id=253091 Signed-off-by: Sui Chen Tested-by: Damian Ivanov Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 2fc52407306c..c69954023c2e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1364,6 +1364,40 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) {} #endif +/* + * On the Acer Aspire Switch Alpha 12, sometimes all SATA ports are detected + * as DUMMY, or detected but eventually get a "link down" and never get up + * again. When this happens, CAP.NP may hold a value of 0x00 or 0x01, and the + * port_map may hold a value of 0x00. + * + * Overriding CAP.NP to 0x02 and the port_map to 0x7 will reveal all 3 ports + * and can significantly reduce the occurrence of the problem. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=189471 + */ +static void acer_sa5_271_workaround(struct ahci_host_priv *hpriv, + struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + { + .ident = "Acer Switch Alpha 12", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271") + }, + }, + { } + }; + + if (dmi_check_system(sysids)) { + dev_info(&pdev->dev, "enabling Acer Switch Alpha 12 workaround\n"); + if ((hpriv->saved_cap & 0xC734FF00) == 0xC734FF00) { + hpriv->port_map = 0x7; + hpriv->cap = 0xC734FF02; + } + } +} + #ifdef CONFIG_ARM64 /* * Due to ERRATA#22536, ThunderX needs to handle HOST_IRQ_STAT differently. @@ -1636,6 +1670,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "online status unreliable, applying workaround\n"); } + + /* Acer SA5-271 workaround modifies private_data */ + acer_sa5_271_workaround(hpriv, pdev); + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at From 5dc63fdcc09f47fb226b8bc7d83a61feb787d817 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Tue, 9 May 2017 16:00:28 +0530 Subject: [PATCH 0042/1065] ata: sata_rcar: Handle return value of clk_prepare_enable Here, Clock enable can failed. So adding an error check for clk_prepare_enable. tj: minor style updates Signed-off-by: Arvind Yadav Signed-off-by: Tejun Heo --- drivers/ata/sata_rcar.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 5d38245a7a73..b7939a2c1fab 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -890,7 +890,10 @@ static int sata_rcar_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to get access to sata clock\n"); return PTR_ERR(priv->clk); } - clk_prepare_enable(priv->clk); + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; host = ata_host_alloc(&pdev->dev, 1); if (!host) { @@ -970,8 +973,11 @@ static int sata_rcar_resume(struct device *dev) struct ata_host *host = dev_get_drvdata(dev); struct sata_rcar_priv *priv = host->private_data; void __iomem *base = priv->base; + int ret; - clk_prepare_enable(priv->clk); + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; /* ack and mask */ iowrite32(0, base + SATAINTSTAT_REG); @@ -988,8 +994,11 @@ static int sata_rcar_restore(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); struct sata_rcar_priv *priv = host->private_data; + int ret; - clk_prepare_enable(priv->clk); + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; sata_rcar_setup_port(host); From c034640a32f8456018d9c8c83799ead683046b95 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 16 May 2017 14:06:12 +0200 Subject: [PATCH 0043/1065] ata: libahci: properly propagate return value of platform_get_irq() When platform_get_irq() fails, it returns an error code, which libahci_platform and replaces it by -EINVAL. This commit fixes that by propagating the error code. It fixes the situation where platform_get_irq() returns -EPROBE_DEFER because the interrupt controller is not available yet, and generally looks like the right thing to do. We pay attention to not show the "no irq" message when we are in an EPROBE_DEFER situation, because the driver probing will be retried later on, once the interrupt controller becomes available to provide the interrupt. Signed-off-by: Thomas Petazzoni Reviewed-by: Hans de Goede Signed-off-by: Tejun Heo --- drivers/ata/libahci_platform.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index aaa761b9081c..cd2eab6aa92e 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -514,8 +514,9 @@ int ahci_platform_init_host(struct platform_device *pdev, irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(dev, "no irq\n"); - return -EINVAL; + if (irq != -EPROBE_DEFER) + dev_err(dev, "no irq\n"); + return irq; } hpriv->irq = irq; From 9512a16b0e1217bbef73d276a67c28b5fbb46512 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 16 May 2017 15:57:42 -0400 Subject: [PATCH 0044/1065] nfsd: Revert "nfsd: check for oversized NFSv2/v3 arguments" This reverts commit 51f567777799 "nfsd: check for oversized NFSv2/v3 arguments", which breaks support for NFSv3 ACLs. That patch was actually an earlier draft of a fix for the problem that was eventually fixed by e6838a29ecb "nfsd: check for oversized NFSv2/v3 arguments". But somehow I accidentally left this earlier draft in the branch that was part of my 2.12 pull request. Reported-by: Eryu Guan Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs3xdr.c | 23 ++++++----------------- fs/nfsd/nfsxdr.c | 13 +++---------- include/linux/sunrpc/svc.h | 3 ++- 3 files changed, 11 insertions(+), 28 deletions(-) diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c index 12feac6ee2fd..452334694a5d 100644 --- a/fs/nfsd/nfs3xdr.c +++ b/fs/nfsd/nfs3xdr.c @@ -334,11 +334,8 @@ nfs3svc_decode_readargs(struct svc_rqst *rqstp, __be32 *p, if (!p) return 0; p = xdr_decode_hyper(p, &args->offset); + args->count = ntohl(*p++); - - if (!xdr_argsize_check(rqstp, p)) - return 0; - len = min(args->count, max_blocksize); /* set up the kvec */ @@ -352,7 +349,7 @@ nfs3svc_decode_readargs(struct svc_rqst *rqstp, __be32 *p, v++; } args->vlen = v; - return 1; + return xdr_argsize_check(rqstp, p); } int @@ -544,11 +541,9 @@ nfs3svc_decode_readlinkargs(struct svc_rqst *rqstp, __be32 *p, p = decode_fh(p, &args->fh); if (!p) return 0; - if (!xdr_argsize_check(rqstp, p)) - return 0; args->buffer = page_address(*(rqstp->rq_next_page++)); - return 1; + return xdr_argsize_check(rqstp, p); } int @@ -574,14 +569,10 @@ nfs3svc_decode_readdirargs(struct svc_rqst *rqstp, __be32 *p, args->verf = p; p += 2; args->dircount = ~0; args->count = ntohl(*p++); - - if (!xdr_argsize_check(rqstp, p)) - return 0; - args->count = min_t(u32, args->count, PAGE_SIZE); args->buffer = page_address(*(rqstp->rq_next_page++)); - return 1; + return xdr_argsize_check(rqstp, p); } int @@ -599,9 +590,6 @@ nfs3svc_decode_readdirplusargs(struct svc_rqst *rqstp, __be32 *p, args->dircount = ntohl(*p++); args->count = ntohl(*p++); - if (!xdr_argsize_check(rqstp, p)) - return 0; - len = args->count = min(args->count, max_blocksize); while (len > 0) { struct page *p = *(rqstp->rq_next_page++); @@ -609,7 +597,8 @@ nfs3svc_decode_readdirplusargs(struct svc_rqst *rqstp, __be32 *p, args->buffer = page_address(p); len -= PAGE_SIZE; } - return 1; + + return xdr_argsize_check(rqstp, p); } int diff --git a/fs/nfsd/nfsxdr.c b/fs/nfsd/nfsxdr.c index 6a4947a3f4fa..de07ff625777 100644 --- a/fs/nfsd/nfsxdr.c +++ b/fs/nfsd/nfsxdr.c @@ -257,9 +257,6 @@ nfssvc_decode_readargs(struct svc_rqst *rqstp, __be32 *p, len = args->count = ntohl(*p++); p++; /* totalcount - unused */ - if (!xdr_argsize_check(rqstp, p)) - return 0; - len = min_t(unsigned int, len, NFSSVC_MAXBLKSIZE_V2); /* set up somewhere to store response. @@ -275,7 +272,7 @@ nfssvc_decode_readargs(struct svc_rqst *rqstp, __be32 *p, v++; } args->vlen = v; - return 1; + return xdr_argsize_check(rqstp, p); } int @@ -365,11 +362,9 @@ nfssvc_decode_readlinkargs(struct svc_rqst *rqstp, __be32 *p, struct nfsd_readli p = decode_fh(p, &args->fh); if (!p) return 0; - if (!xdr_argsize_check(rqstp, p)) - return 0; args->buffer = page_address(*(rqstp->rq_next_page++)); - return 1; + return xdr_argsize_check(rqstp, p); } int @@ -407,11 +402,9 @@ nfssvc_decode_readdirargs(struct svc_rqst *rqstp, __be32 *p, args->cookie = ntohl(*p++); args->count = ntohl(*p++); args->count = min_t(u32, args->count, PAGE_SIZE); - if (!xdr_argsize_check(rqstp, p)) - return 0; args->buffer = page_address(*(rqstp->rq_next_page++)); - return 1; + return xdr_argsize_check(rqstp, p); } /* diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 94631026f79c..11cef5a7bc87 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -336,7 +336,8 @@ xdr_argsize_check(struct svc_rqst *rqstp, __be32 *p) { char *cp = (char *)p; struct kvec *vec = &rqstp->rq_arg.head[0]; - return cp == (char *)vec->iov_base + vec->iov_len; + return cp >= (char*)vec->iov_base + && cp <= (char*)vec->iov_base + vec->iov_len; } static inline int From f3f6cc814f9cb61cfb738af2b126a8bf19e5ab4c Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 13 May 2017 13:40:05 +0200 Subject: [PATCH 0045/1065] ARM: davinci: PM: Free resources in error handling path in 'davinci_pm_init' If 'sram_alloc' fails, we need to free already allocated resources. Fixes: aa9aa1ec2df6 ("ARM: davinci: PM: rework init, remove platform device") Signed-off-by: Christophe JAILLET Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/pm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index efb80354f303..d282b0783ecf 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -153,7 +153,8 @@ int __init davinci_pm_init(void) davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL); if (!davinci_sram_suspend) { pr_err("PM: cannot allocate SRAM memory\n"); - return -ENOMEM; + ret = -ENOMEM; + goto no_sram_mem; } davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend, @@ -161,6 +162,8 @@ int __init davinci_pm_init(void) suspend_set_ops(&davinci_pm_ops); +no_sram_mem: + iounmap(pm_config.ddrpsc_reg_base); no_ddrpsc_mem: iounmap(pm_config.ddrpll_reg_base); no_ddrpll_mem: From 90431eb49bff6d79814cbf0c96e13597ad53095c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 16 May 2017 01:51:41 +0000 Subject: [PATCH 0046/1065] ASoC: rsnd: don't use PDTA bit for 24bit on SSI Current SSI uses PDTA bit which indicates data that Input/Output data are Right-Aligned. But, 24bit sound should be Left-Aligned in this HW. Because Linux is using Right-Aligned data, and HW uses Left-Aligned data, current 24bit data is missing lower 8bit. To fix this issue, this patch removes PDTA bit, and shift 8bit in necessary module Reported-by: Hiroyuki Yokoyama Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Signed-off-by: Mark Brown --- sound/soc/sh/rcar/cmd.c | 1 + sound/soc/sh/rcar/core.c | 51 ++++++++++++++++++++++++++++++++++++++++ sound/soc/sh/rcar/gen.c | 1 + sound/soc/sh/rcar/rsnd.h | 2 ++ sound/soc/sh/rcar/src.c | 12 ++++++++-- sound/soc/sh/rcar/ssi.c | 2 +- sound/soc/sh/rcar/ssiu.c | 3 ++- 7 files changed, 68 insertions(+), 4 deletions(-) diff --git a/sound/soc/sh/rcar/cmd.c b/sound/soc/sh/rcar/cmd.c index 7d92a24b7cfa..d879c010cf03 100644 --- a/sound/soc/sh/rcar/cmd.c +++ b/sound/soc/sh/rcar/cmd.c @@ -89,6 +89,7 @@ static int rsnd_cmd_init(struct rsnd_mod *mod, dev_dbg(dev, "ctu/mix path = 0x%08x", data); rsnd_mod_write(mod, CMD_ROUTE_SLCT, data); + rsnd_mod_write(mod, CMD_BUSIF_MODE, rsnd_get_busif_shift(io, mod) | 1); rsnd_mod_write(mod, CMD_BUSIF_DALIGN, rsnd_get_dalign(mod, io)); rsnd_adg_set_cmd_timsel_gen2(mod, io); diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index 1744015408c3..8c1f4e2e0c4f 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -343,6 +343,57 @@ u32 rsnd_get_dalign(struct rsnd_mod *mod, struct rsnd_dai_stream *io) return 0x76543210; } +u32 rsnd_get_busif_shift(struct rsnd_dai_stream *io, struct rsnd_mod *mod) +{ + enum rsnd_mod_type playback_mods[] = { + RSND_MOD_SRC, + RSND_MOD_CMD, + RSND_MOD_SSIU, + }; + enum rsnd_mod_type capture_mods[] = { + RSND_MOD_CMD, + RSND_MOD_SRC, + RSND_MOD_SSIU, + }; + struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); + struct rsnd_mod *tmod = NULL; + enum rsnd_mod_type *mods = + rsnd_io_is_play(io) ? + playback_mods : capture_mods; + int i; + + /* + * This is needed for 24bit data + * We need to shift 8bit + * + * Linux 24bit data is located as 0x00****** + * HW 24bit data is located as 0x******00 + * + */ + switch (runtime->sample_bits) { + case 16: + return 0; + case 32: + break; + } + + for (i = 0; i < ARRAY_SIZE(playback_mods); i++) { + tmod = rsnd_io_to_mod(io, mods[i]); + if (tmod) + break; + } + + if (tmod != mod) + return 0; + + if (rsnd_io_is_play(io)) + return (0 << 20) | /* shift to Left */ + (8 << 16); /* 8bit */ + else + return (1 << 20) | /* shift to Right */ + (8 << 16); /* 8bit */ +} + /* * rsnd_dai functions */ diff --git a/sound/soc/sh/rcar/gen.c b/sound/soc/sh/rcar/gen.c index 63b6d3c28021..4b0980728e13 100644 --- a/sound/soc/sh/rcar/gen.c +++ b/sound/soc/sh/rcar/gen.c @@ -236,6 +236,7 @@ static int rsnd_gen2_probe(struct rsnd_priv *priv) RSND_GEN_M_REG(SRC_ROUTE_MODE0, 0xc, 0x20), RSND_GEN_M_REG(SRC_CTRL, 0x10, 0x20), RSND_GEN_M_REG(SRC_INT_ENABLE0, 0x18, 0x20), + RSND_GEN_M_REG(CMD_BUSIF_MODE, 0x184, 0x20), RSND_GEN_M_REG(CMD_BUSIF_DALIGN,0x188, 0x20), RSND_GEN_M_REG(CMD_ROUTE_SLCT, 0x18c, 0x20), RSND_GEN_M_REG(CMD_CTRL, 0x190, 0x20), diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index dbf4163427e8..323af41ecfcb 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -73,6 +73,7 @@ enum rsnd_reg { RSND_REG_SCU_SYS_INT_EN0, RSND_REG_SCU_SYS_INT_EN1, RSND_REG_CMD_CTRL, + RSND_REG_CMD_BUSIF_MODE, RSND_REG_CMD_BUSIF_DALIGN, RSND_REG_CMD_ROUTE_SLCT, RSND_REG_CMDOUT_TIMSEL, @@ -204,6 +205,7 @@ void rsnd_bset(struct rsnd_priv *priv, struct rsnd_mod *mod, enum rsnd_reg reg, u32 mask, u32 data); u32 rsnd_get_adinr_bit(struct rsnd_mod *mod, struct rsnd_dai_stream *io); u32 rsnd_get_dalign(struct rsnd_mod *mod, struct rsnd_dai_stream *io); +u32 rsnd_get_busif_shift(struct rsnd_dai_stream *io, struct rsnd_mod *mod); /* * R-Car DMA diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c index 20b5b2ec625e..76a477a3ccb5 100644 --- a/sound/soc/sh/rcar/src.c +++ b/sound/soc/sh/rcar/src.c @@ -190,11 +190,13 @@ static void rsnd_src_set_convert_rate(struct rsnd_dai_stream *io, struct rsnd_priv *priv = rsnd_mod_to_priv(mod); struct device *dev = rsnd_priv_to_dev(priv); struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); + int is_play = rsnd_io_is_play(io); int use_src = 0; u32 fin, fout; u32 ifscr, fsrate, adinr; u32 cr, route; u32 bsdsr, bsisr; + u32 i_busif, o_busif, tmp; uint ratio; if (!runtime) @@ -270,6 +272,11 @@ static void rsnd_src_set_convert_rate(struct rsnd_dai_stream *io, break; } + /* BUSIF_MODE */ + tmp = rsnd_get_busif_shift(io, mod); + i_busif = ( is_play ? tmp : 0) | 1; + o_busif = (!is_play ? tmp : 0) | 1; + rsnd_mod_write(mod, SRC_ROUTE_MODE0, route); rsnd_mod_write(mod, SRC_SRCIR, 1); /* initialize */ @@ -281,8 +288,9 @@ static void rsnd_src_set_convert_rate(struct rsnd_dai_stream *io, rsnd_mod_write(mod, SRC_BSISR, bsisr); rsnd_mod_write(mod, SRC_SRCIR, 0); /* cancel initialize */ - rsnd_mod_write(mod, SRC_I_BUSIF_MODE, 1); - rsnd_mod_write(mod, SRC_O_BUSIF_MODE, 1); + rsnd_mod_write(mod, SRC_I_BUSIF_MODE, i_busif); + rsnd_mod_write(mod, SRC_O_BUSIF_MODE, o_busif); + rsnd_mod_write(mod, SRC_BUSIF_DALIGN, rsnd_get_dalign(mod, io)); rsnd_adg_set_src_timesel_gen2(mod, io, fin, fout); diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 135c5669f796..e43277a5068c 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -302,7 +302,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, * always use 32bit system word. * see also rsnd_ssi_master_clk_enable() */ - cr_own = FORCE | SWL_32 | PDTA; + cr_own = FORCE | SWL_32; if (rdai->bit_clk_inv) cr_own |= SCKP; diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c index 14fafdaf1395..512d238b79e2 100644 --- a/sound/soc/sh/rcar/ssiu.c +++ b/sound/soc/sh/rcar/ssiu.c @@ -144,7 +144,8 @@ static int rsnd_ssiu_init_gen2(struct rsnd_mod *mod, (rsnd_io_is_play(io) ? rsnd_runtime_channel_after_ctu(io) : rsnd_runtime_channel_original(io))); - rsnd_mod_write(mod, SSI_BUSIF_MODE, 1); + rsnd_mod_write(mod, SSI_BUSIF_MODE, + rsnd_get_busif_shift(io, mod) | 1); rsnd_mod_write(mod, SSI_BUSIF_DALIGN, rsnd_get_dalign(mod, io)); } From 61abce1312bf97eac62eef704260ce9a8f9b85f6 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Mon, 15 May 2017 10:36:17 +0200 Subject: [PATCH 0047/1065] ASoC: atmel-classd: sync regcache when resuming The PM functions used in this driver are the ones defined in sounc/soc/soc-core.c. When suspending (using snd_soc_suspend), the regcache is marked dirty but is never synced on resume. Sync regcache on resume of Atmel ClassD device. Signed-off-by: Quentin Schulz Acked-by: Alexandre Belloni Acked-by: Nicolas Ferre Signed-off-by: Mark Brown --- sound/soc/atmel/atmel-classd.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/soc/atmel/atmel-classd.c b/sound/soc/atmel/atmel-classd.c index 7ae46c2647d4..b7ef8c59b49a 100644 --- a/sound/soc/atmel/atmel-classd.c +++ b/sound/soc/atmel/atmel-classd.c @@ -301,6 +301,14 @@ static int atmel_classd_codec_probe(struct snd_soc_codec *codec) return 0; } +static int atmel_classd_codec_resume(struct snd_soc_codec *codec) +{ + struct snd_soc_card *card = snd_soc_codec_get_drvdata(codec); + struct atmel_classd *dd = snd_soc_card_get_drvdata(card); + + return regcache_sync(dd->regmap); +} + static struct regmap *atmel_classd_codec_get_remap(struct device *dev) { return dev_get_regmap(dev, NULL); @@ -308,6 +316,7 @@ static struct regmap *atmel_classd_codec_get_remap(struct device *dev) static struct snd_soc_codec_driver soc_codec_dev_classd = { .probe = atmel_classd_codec_probe, + .resume = atmel_classd_codec_resume, .get_regmap = atmel_classd_codec_get_remap, .component_driver = { .controls = atmel_classd_snd_controls, From 95d7c1f18bf8ac03b0fc48eac1f1b11f867765b8 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 13 May 2017 13:40:20 +0200 Subject: [PATCH 0048/1065] ARM: davinci: PM: Do not free useful resources in normal path in 'davinci_pm_init' It is wrong to iounmap resources in the normal path of davinci_pm_init() The 3 ioremap'ed fields of 'pm_config' can be accessed later on in other functions, so we should return 'success' instead of unrolling everything. Fixes: aa9aa1ec2df6 ("ARM: davinci: PM: rework init, remove platform device") Signed-off-by: Christophe JAILLET [nsekhar@ti.com: commit message and minor style fixes] Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/pm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index d282b0783ecf..b5cc05dc2cb2 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -162,6 +162,8 @@ int __init davinci_pm_init(void) suspend_set_ops(&davinci_pm_ops); + return 0; + no_sram_mem: iounmap(pm_config.ddrpsc_reg_base); no_ddrpsc_mem: From c0e7bb38c07cbd8269549ee0a0566021a3c729de Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 15 May 2017 14:11:03 +0200 Subject: [PATCH 0049/1065] s390/kvm: do not rely on the ILC on kvm host protection fauls For most cases a protection exception in the host (e.g. copy on write or dirty tracking) on the sie instruction will indicate an instruction length of 4. Turns out that there are some corner cases (e.g. runtime instrumentation) where this is not necessarily true and the ILC is unpredictable. Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for all possible ILCs. Signed-off-by: Christian Borntraeger Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index e408d9cc5b96..6315037335ba 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -231,12 +231,17 @@ ENTRY(sie64a) lctlg %c1,%c1,__LC_USER_ASCE # load primary asce .Lsie_done: # some program checks are suppressing. C code (e.g. do_protection_exception) -# will rewind the PSW by the ILC, which is 4 bytes in case of SIE. Other -# instructions between sie64a and .Lsie_done should not cause program -# interrupts. So lets use a nop (47 00 00 00) as a landing pad. +# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There +# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable. +# Other instructions between sie64a and .Lsie_done should not cause program +# interrupts. So lets use 3 nops as a landing pad for all possible rewinds. # See also .Lcleanup_sie -.Lrewind_pad: - nop 0 +.Lrewind_pad6: + nopr 7 +.Lrewind_pad4: + nopr 7 +.Lrewind_pad2: + nopr 7 .globl sie_exit sie_exit: lg %r14,__SF_EMPTY+8(%r15) # load guest register save area @@ -249,7 +254,9 @@ sie_exit: stg %r14,__SF_EMPTY+16(%r15) # set exit reason code j sie_exit - EX_TABLE(.Lrewind_pad,.Lsie_fault) + EX_TABLE(.Lrewind_pad6,.Lsie_fault) + EX_TABLE(.Lrewind_pad4,.Lsie_fault) + EX_TABLE(.Lrewind_pad2,.Lsie_fault) EX_TABLE(sie_exit,.Lsie_fault) EXPORT_SYMBOL(sie64a) EXPORT_SYMBOL(sie_exit) From 33c35aa4817864e056fd772230b0c6b552e36ea2 Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Mon, 15 May 2017 09:34:06 -0400 Subject: [PATCH 0050/1065] cgroup: Prevent kill_css() from being called more than once The kill_css() function may be called more than once under the condition that the css was killed but not physically removed yet followed by the removal of the cgroup that is hosting the css. This patch prevents any harmm from being done when that happens. Signed-off-by: Waiman Long Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org # v4.5+ --- include/linux/cgroup-defs.h | 1 + kernel/cgroup/cgroup.c | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h index 21745946cae1..ec47101cb1bf 100644 --- a/include/linux/cgroup-defs.h +++ b/include/linux/cgroup-defs.h @@ -48,6 +48,7 @@ enum { CSS_ONLINE = (1 << 1), /* between ->css_online() and ->css_offline() */ CSS_RELEASED = (1 << 2), /* refcnt reached zero, released */ CSS_VISIBLE = (1 << 3), /* css is visible to userland */ + CSS_DYING = (1 << 4), /* css is dying */ }; /* bits in struct cgroup flags field */ diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index c3c9a0e1b3c9..8d4e85eae42c 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -4265,6 +4265,11 @@ static void kill_css(struct cgroup_subsys_state *css) { lockdep_assert_held(&cgroup_mutex); + if (css->flags & CSS_DYING) + return; + + css->flags |= CSS_DYING; + /* * This must happen before css is disassociated with its cgroup. * See seq_css() for details. From 62b97d502bb76c6e8d589e42e02bfcb7bdff0453 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 15 May 2017 06:48:58 -0700 Subject: [PATCH 0051/1065] usb: chipidea: imx: Do not access CLKONOFF on i.MX51 Unlike i.MX53, i.MX51's USBOH3 register file does not implemenent registers past offset 0x018, which includes MX53_USB_CLKONOFF_CTRL_OFFSET and trying to access that register on said platform results in external abort. Fix it by enabling CLKONOFF accessing codepath only for i.MX53. Cc: stable Fixes 3be3251db088 ("usb: chipidea: imx: Disable internal 60Mhz clock with ULPI PHY") Cc: cphealy@gmail.com Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov Signed-off-by: Peter Chen --- drivers/usb/chipidea/usbmisc_imx.c | 41 +++++++++++++++++++++++------- 1 file changed, 32 insertions(+), 9 deletions(-) diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index e77a4ed4f021..9f4a0185dd60 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -108,6 +108,8 @@ struct imx_usbmisc { const struct usbmisc_ops *ops; }; +static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data); + static int usbmisc_imx25_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); @@ -242,10 +244,15 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data) val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN | MX53_USB_UHx_CTRL_ULPI_INT_EN; writel(val, reg); - /* Disable internal 60Mhz clock */ - reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET; - val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF; - writel(val, reg); + if (is_imx53_usbmisc(data)) { + /* Disable internal 60Mhz clock */ + reg = usbmisc->base + + MX53_USB_CLKONOFF_CTRL_OFFSET; + val = readl(reg) | + MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF; + writel(val, reg); + } + } if (data->disable_oc) { reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; @@ -267,10 +274,15 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data) val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN | MX53_USB_UHx_CTRL_ULPI_INT_EN; writel(val, reg); - /* Disable internal 60Mhz clock */ - reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET; - val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF; - writel(val, reg); + + if (is_imx53_usbmisc(data)) { + /* Disable internal 60Mhz clock */ + reg = usbmisc->base + + MX53_USB_CLKONOFF_CTRL_OFFSET; + val = readl(reg) | + MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF; + writel(val, reg); + } } if (data->disable_oc) { reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; @@ -456,6 +468,10 @@ static const struct usbmisc_ops imx27_usbmisc_ops = { .init = usbmisc_imx27_init, }; +static const struct usbmisc_ops imx51_usbmisc_ops = { + .init = usbmisc_imx53_init, +}; + static const struct usbmisc_ops imx53_usbmisc_ops = { .init = usbmisc_imx53_init, }; @@ -479,6 +495,13 @@ static const struct usbmisc_ops imx7d_usbmisc_ops = { .set_wakeup = usbmisc_imx7d_set_wakeup, }; +static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + + return usbmisc->ops == &imx53_usbmisc_ops; +} + int imx_usbmisc_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc; @@ -536,7 +559,7 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = { }, { .compatible = "fsl,imx51-usbmisc", - .data = &imx53_usbmisc_ops, + .data = &imx51_usbmisc_ops, }, { .compatible = "fsl,imx53-usbmisc", From aa1f058d7d9244423b8c5a75b9484b1115df7f02 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Mon, 24 Apr 2017 12:35:51 +0000 Subject: [PATCH 0052/1065] usb: chipidea: udc: fix NULL pointer dereference if udc_start failed Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET] too early in ci_hdrc_gadget_init(), if udc_start() fails due to some reason, the ci->roles[CI_ROLE_GADGET] check in ci_hdrc_gadget_destroy can't protect us. We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if udc_start() succeed. [ 1.398550] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 1.448600] PC is at dma_pool_free+0xb8/0xf0 [ 1.453012] LR is at dma_pool_free+0x28/0xf0 [ 2.113369] [] dma_pool_free+0xb8/0xf0 [ 2.118857] [] destroy_eps+0x4c/0x68 [ 2.124165] [] ci_hdrc_gadget_destroy+0x28/0x50 [ 2.130461] [] ci_hdrc_probe+0x588/0x7e8 [ 2.136129] [] platform_drv_probe+0x50/0xb8 [ 2.142066] [] driver_probe_device+0x1fc/0x2a8 [ 2.148270] [] __device_attach_driver+0x9c/0xf8 [ 2.154563] [] bus_for_each_drv+0x58/0x98 [ 2.160317] [] __device_attach+0xc4/0x138 [ 2.166072] [] device_initial_probe+0x10/0x18 [ 2.172185] [] bus_probe_device+0x94/0xa0 [ 2.177940] [] device_add+0x3f0/0x560 [ 2.183337] [] platform_device_add+0x180/0x240 [ 2.189541] [] ci_hdrc_add_device+0x440/0x4f8 [ 2.195654] [] ci_hdrc_usb2_probe+0x13c/0x2d8 [ 2.201769] [] platform_drv_probe+0x50/0xb8 [ 2.207705] [] driver_probe_device+0x1fc/0x2a8 [ 2.213910] [] __driver_attach+0xac/0xb0 [ 2.219575] [] bus_for_each_dev+0x60/0xa0 [ 2.225329] [] driver_attach+0x20/0x28 [ 2.230816] [] bus_add_driver+0x1d0/0x238 [ 2.236571] [] driver_register+0x60/0xf8 [ 2.242237] [] __platform_driver_register+0x44/0x50 [ 2.248891] [] ci_hdrc_usb2_driver_init+0x18/0x20 [ 2.255365] [] do_one_initcall+0x38/0x128 [ 2.261121] [] kernel_init_freeable+0x1ac/0x250 [ 2.267414] [] kernel_init+0x10/0x100 [ 2.272810] [] ret_from_fork+0x10/0x50 Cc: stable Fixes: 3f124d233e97 ("usb: chipidea: add role init and destroy APIs") Signed-off-by: Jisheng Zhang Signed-off-by: Peter Chen --- drivers/usb/chipidea/udc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 56d2d3213076..d68b125796f9 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1993,6 +1993,7 @@ static void udc_id_switch_for_host(struct ci_hdrc *ci) int ci_hdrc_gadget_init(struct ci_hdrc *ci) { struct ci_role_driver *rdrv; + int ret; if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC)) return -ENXIO; @@ -2005,7 +2006,10 @@ int ci_hdrc_gadget_init(struct ci_hdrc *ci) rdrv->stop = udc_id_switch_for_host; rdrv->irq = udc_irq; rdrv->name = "gadget"; - ci->roles[CI_ROLE_GADGET] = rdrv; - return udc_start(ci); + ret = udc_start(ci); + if (!ret) + ci->roles[CI_ROLE_GADGET] = rdrv; + + return ret; } From f36afd38c5372a7cd5b363786fd62076c8b28427 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 17 May 2017 23:19:01 +0200 Subject: [PATCH 0053/1065] clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM The newly added PRCM CCU driver uses SUNXI_CCU_MP_WITH_MUX_GATE, which causes a link error when no other driver enables SUNXI_CCU_MP: drivers/clk/built-in.o:(.data+0x5c8c8): undefined reference to `ccu_mp_ops' This adds an explicit 'select' statement for it. Signed-off-by: Arnd Bergmann Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index b0d551a8efe4..eb89c7801f00 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -156,6 +156,7 @@ config SUN8I_R_CCU bool "Support for Allwinner SoCs' PRCM CCUs" select SUNXI_CCU_DIV select SUNXI_CCU_GATE + select SUNXI_CCU_MP default MACH_SUN8I || (ARCH_SUNXI && ARM64) endif From 4681ee21d62cfed4364e09ec50ee8e88185dd628 Mon Sep 17 00:00:00 2001 From: Joonas Lahtinen Date: Thu, 18 May 2017 11:49:39 +0300 Subject: [PATCH 0054/1065] drm/i915: Do not sync RCU during shrinking Due to the complex dependencies between workqueues and RCU, which are not easily detected by lockdep, do not synchronize RCU during shrinking. On low-on-memory systems (mem=1G for example), the RCU sync leads to all system workqueus freezing and unrelated lockdep splats are displayed according to reports. GIT bisecting done by J. R. Okajima points to the commit where RCU syncing was extended. RCU sync gains us very little benefit in real life scenarios where the amount of memory used by object backing storage is dominant over the metadata under RCU, so drop it altogether. " Yeeeaah, if core could just, go ahead and reclaim RCU queues, that'd be great. " - Chris Wilson, 2016 (0eafec6d3244) v2: More information to commit message. v3: Remove "grep _rcu_" escapee from i915_gem_shrink_all (Andrea) Fixes: c053b5a506d3 ("drm/i915: Don't call synchronize_rcu_expedited under struct_mutex") Suggested-by: Chris Wilson Reported-by: J. R. Okajima Signed-off-by: Joonas Lahtinen Reviewed-by: Chris Wilson Tested-by: Hugh Dickins Tested-by: Andrea Arcangeli Cc: Chris Wilson Cc: Tvrtko Ursulin Cc: J. R. Okajima Cc: Andrea Arcangeli Cc: Hugh Dickins Cc: Jani Nikula Cc: # v4.11+ (cherry picked from commit 73cc0b9aa9afa5ba65d92e46ded61d29430d72a4) Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1495097379-573-1-git-send-email-joonas.lahtinen@linux.intel.com --- drivers/gpu/drm/i915/i915_gem_shrinker.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_shrinker.c b/drivers/gpu/drm/i915/i915_gem_shrinker.c index 129ed303a6c4..57d9f7f4ef15 100644 --- a/drivers/gpu/drm/i915/i915_gem_shrinker.c +++ b/drivers/gpu/drm/i915/i915_gem_shrinker.c @@ -59,9 +59,6 @@ static void i915_gem_shrinker_unlock(struct drm_device *dev, bool unlock) return; mutex_unlock(&dev->struct_mutex); - - /* expedite the RCU grace period to free some request slabs */ - synchronize_rcu_expedited(); } static bool any_vma_pinned(struct drm_i915_gem_object *obj) @@ -274,8 +271,6 @@ unsigned long i915_gem_shrink_all(struct drm_i915_private *dev_priv) I915_SHRINK_ACTIVE); intel_runtime_pm_put(dev_priv); - synchronize_rcu(); /* wait for our earlier RCU delayed slab frees */ - return freed; } From 171d8b9363725e122b164e6b9ef2acf2f751e387 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Tue, 16 May 2017 09:55:14 +0100 Subject: [PATCH 0055/1065] drm/i915: use vma->size for appgtt allocate_va_range For the aliasing ppgtt we clear the va range up to vma->size, but seem to allocate up to vma->node.size, which is a little inconsistent given that vma->node.size >= vma->size. Not that is really matters all that much since we preallocate anyway, but for consistency just use vma->size. Fixes: ff685975d97f ("drm/i915: Move allocate_va_range to GTT") Signed-off-by: Matthew Auld Cc: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/20170516085514.5853-1-matthew.auld@intel.com Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson (cherry picked from commit d567232cbd9ec2a289ddffea4013b7265bbcc3d5) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index a0563e18d753..50b8f1139ff9 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -2313,7 +2313,7 @@ static int aliasing_gtt_bind_vma(struct i915_vma *vma, appgtt->base.allocate_va_range) { ret = appgtt->base.allocate_va_range(&appgtt->base, vma->node.start, - vma->node.size); + vma->size); if (ret) goto err_pages; } From d8db7ae4eeebb278aa68a231a003e7102f635a4d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 18 May 2017 13:06:44 +0200 Subject: [PATCH 0056/1065] drm/i915: Fix new -Wint-in-bool-context gcc compiler warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit fixes the following compiler warning: drivers/gpu/drm/i915/intel_dsi.c: In function ‘intel_dsi_prepare’: drivers/gpu/drm/i915/intel_dsi.c:1487:23: warning: ?: using integer constants in boolean context [-Wint-in-bool-context] PORT_A ? PORT_C : PORT_A), Fixes: f4c3a88e5f04 ("drm/i915: Tighten mmio arrays for MIPI_PORT") Signed-off-by: Hans de Goede Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/20170518110644.9902-1-hdegoede@redhat.com (cherry picked from commit 0ad4dc887d4168448e8c801aa4edd8fe1e0bd534) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_reg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5a7c63e64381..65b837e96fe6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -8280,7 +8280,7 @@ enum { /* MIPI DSI registers */ -#define _MIPI_PORT(port, a, c) ((port) ? c : a) /* ports A and C only */ +#define _MIPI_PORT(port, a, c) (((port) == PORT_A) ? a : c) /* ports A and C only */ #define _MMIO_MIPI(port, a, c) _MMIO(_MIPI_PORT(port, a, c)) #define MIPIO_TXESC_CLK_DIV1 _MMIO(0x160004) From 8137ae26d25303e7b5cfb418fd28b976461e5b6e Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Tue, 16 May 2017 08:45:46 +0300 Subject: [PATCH 0057/1065] ovl: fix creds leak in copy up error path Fixes: 42f269b92540 ("ovl: rearrange code in ovl_copy_up_locked()") Cc: # v4.11 Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/copy_up.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index 9008ab9fbd2e..061a8448e6c4 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -343,12 +343,13 @@ static int ovl_copy_up_locked(struct dentry *workdir, struct dentry *upperdir, temp = ovl_do_tmpfile(upperdir, stat->mode); else temp = ovl_lookup_temp(workdir, dentry); - err = PTR_ERR(temp); - if (IS_ERR(temp)) - goto out1; - err = 0; - if (!tmpfile) + if (IS_ERR(temp)) { + err = PTR_ERR(temp); + temp = NULL; + } + + if (!err && !tmpfile) err = ovl_create_real(wdir, temp, &cattr, NULL, true); if (new_creds) { From 82b749b2c65e9d108c1c5598dc0a5f436b525f42 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Wed, 17 May 2017 00:12:40 +0300 Subject: [PATCH 0058/1065] ovl: check on mount time if upper fs supports setting xattr xattr are needed by overlayfs for setting opaque dir, redirect dir and copy up origin. Check at mount time by trying to set the overlay.opaque xattr on the workdir and if that fails issue a warning message. Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/overlayfs.h | 3 +++ fs/overlayfs/ovl_entry.h | 1 + fs/overlayfs/super.c | 13 +++++++++++++ fs/overlayfs/util.c | 21 +++++++++++++++++++++ 4 files changed, 38 insertions(+) diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h index caa36cb9c46d..ce7c3aba61e4 100644 --- a/fs/overlayfs/overlayfs.h +++ b/fs/overlayfs/overlayfs.h @@ -279,3 +279,6 @@ int ovl_copy_up(struct dentry *dentry); int ovl_copy_up_flags(struct dentry *dentry, int flags); int ovl_copy_xattr(struct dentry *old, struct dentry *new); int ovl_set_attr(struct dentry *upper, struct kstat *stat); +int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry, + const char *name, const void *value, size_t size, + int xerr); diff --git a/fs/overlayfs/ovl_entry.h b/fs/overlayfs/ovl_entry.h index b2023ddb8532..ad86c0a302eb 100644 --- a/fs/overlayfs/ovl_entry.h +++ b/fs/overlayfs/ovl_entry.h @@ -28,6 +28,7 @@ struct ovl_fs { /* creds of process who forced instantiation of super block */ const struct cred *creator_cred; bool tmpfile; + bool noxattr; wait_queue_head_t copyup_wq; /* sb common to all layers */ struct super_block *same_sb; diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index 9828b7de8999..f1647626a882 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -891,6 +891,19 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent) dput(temp); else pr_warn("overlayfs: upper fs does not support tmpfile.\n"); + + /* + * Check if upper/work fs supports trusted.overlay.* + * xattr + */ + err = ovl_do_setxattr(ufs->workdir, OVL_XATTR_OPAQUE, + "0", 1, 0); + if (err) { + ufs->noxattr = true; + pr_warn("overlayfs: upper fs does not support xattr.\n"); + } else { + vfs_removexattr(ufs->workdir, OVL_XATTR_OPAQUE); + } } } diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index cfdea47313a1..b5a0dc36ee96 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -303,3 +303,24 @@ void ovl_copy_up_end(struct dentry *dentry) wake_up_locked(&ofs->copyup_wq); spin_unlock(&ofs->copyup_wq.lock); } + +int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry, + const char *name, const void *value, size_t size, + int xerr) +{ + int err; + struct ovl_fs *ofs = dentry->d_sb->s_fs_info; + + if (ofs->noxattr) + return xerr; + + err = ovl_do_setxattr(upperdentry, name, value, size, 0); + + if (err == -EOPNOTSUPP) { + pr_warn("overlayfs: cannot set %s xattr on upper\n", name); + ofs->noxattr = true; + return xerr; + } + + return err; +} From 6266d465bde044a105f6c2d4e244680f951a2d70 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 18 May 2017 16:11:24 +0200 Subject: [PATCH 0059/1065] ovl: don't fail copy-up if upper doesn't support xattr Signed-off-by: Miklos Szeredi --- fs/overlayfs/copy_up.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index 061a8448e6c4..f92ab35d43a6 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -300,7 +300,11 @@ static int ovl_set_origin(struct dentry *dentry, struct dentry *lower, return PTR_ERR(fh); } - err = ovl_do_setxattr(upper, OVL_XATTR_ORIGIN, fh, fh ? fh->len : 0, 0); + /* + * Do not fail when upper doesn't support xattrs. + */ + err = ovl_check_setxattr(dentry, upper, OVL_XATTR_ORIGIN, fh, + fh ? fh->len : 0, 0); kfree(fh); return err; From 21a228781104ae6fed7e720137ab024575071feb Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Wed, 17 May 2017 00:12:41 +0300 Subject: [PATCH 0060/1065] ovl: handle rename when upper doesn't support xattr On failure to set opaque/redirect xattr on rename, skip setting xattr and return -EXDEV. On failure to set opaque xattr when creating a new directory, -EIO is returned instead of -EOPNOTSUPP. Any failure to set those xattr will be recorded in super block and then setting any xattr on upper won't be attempted again. Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/dir.c | 29 +++++++++++++++++++---------- fs/overlayfs/overlayfs.h | 1 - fs/overlayfs/util.c | 9 +-------- 3 files changed, 20 insertions(+), 19 deletions(-) diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c index 723b98b90698..80e0e202a346 100644 --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -127,17 +127,28 @@ int ovl_create_real(struct inode *dir, struct dentry *newdentry, return err; } -static int ovl_set_opaque(struct dentry *dentry, struct dentry *upperdentry) +static int ovl_set_opaque_xerr(struct dentry *dentry, struct dentry *upper, + int xerr) { int err; - err = ovl_do_setxattr(upperdentry, OVL_XATTR_OPAQUE, "y", 1, 0); + err = ovl_check_setxattr(dentry, upper, OVL_XATTR_OPAQUE, "y", 1, xerr); if (!err) ovl_dentry_set_opaque(dentry); return err; } +static int ovl_set_opaque(struct dentry *dentry, struct dentry *upperdentry) +{ + /* + * Fail with -EIO when trying to create opaque dir and upper doesn't + * support xattrs. ovl_rename() calls ovl_set_opaque_xerr(-EXDEV) to + * return a specific error for noxattr case. + */ + return ovl_set_opaque_xerr(dentry, upperdentry, -EIO); +} + /* Common operations required to be done after creation of file on upper */ static void ovl_instantiate(struct dentry *dentry, struct inode *inode, struct dentry *newdentry, bool hardlink) @@ -846,18 +857,16 @@ static int ovl_set_redirect(struct dentry *dentry, bool samedir) if (IS_ERR(redirect)) return PTR_ERR(redirect); - err = ovl_do_setxattr(ovl_dentry_upper(dentry), OVL_XATTR_REDIRECT, - redirect, strlen(redirect), 0); + err = ovl_check_setxattr(dentry, ovl_dentry_upper(dentry), + OVL_XATTR_REDIRECT, + redirect, strlen(redirect), -EXDEV); if (!err) { spin_lock(&dentry->d_lock); ovl_dentry_set_redirect(dentry, redirect); spin_unlock(&dentry->d_lock); } else { kfree(redirect); - if (err == -EOPNOTSUPP) - ovl_clear_redirect_dir(dentry->d_sb); - else - pr_warn_ratelimited("overlay: failed to set redirect (%i)\n", err); + pr_warn_ratelimited("overlay: failed to set redirect (%i)\n", err); /* Fall back to userspace copy-up */ err = -EXDEV; } @@ -992,7 +1001,7 @@ static int ovl_rename(struct inode *olddir, struct dentry *old, if (ovl_type_merge_or_lower(old)) err = ovl_set_redirect(old, samedir); else if (!old_opaque && ovl_type_merge(new->d_parent)) - err = ovl_set_opaque(old, olddentry); + err = ovl_set_opaque_xerr(old, olddentry, -EXDEV); if (err) goto out_dput; } @@ -1000,7 +1009,7 @@ static int ovl_rename(struct inode *olddir, struct dentry *old, if (ovl_type_merge_or_lower(new)) err = ovl_set_redirect(new, samedir); else if (!new_opaque && ovl_type_merge(old->d_parent)) - err = ovl_set_opaque(new, newdentry); + err = ovl_set_opaque_xerr(new, newdentry, -EXDEV); if (err) goto out_dput; } diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h index ce7c3aba61e4..505b18b56330 100644 --- a/fs/overlayfs/overlayfs.h +++ b/fs/overlayfs/overlayfs.h @@ -206,7 +206,6 @@ bool ovl_dentry_is_opaque(struct dentry *dentry); bool ovl_dentry_is_whiteout(struct dentry *dentry); void ovl_dentry_set_opaque(struct dentry *dentry); bool ovl_redirect_dir(struct super_block *sb); -void ovl_clear_redirect_dir(struct super_block *sb); const char *ovl_dentry_get_redirect(struct dentry *dentry); void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect); void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry); diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index b5a0dc36ee96..4d541a8d0834 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -191,14 +191,7 @@ bool ovl_redirect_dir(struct super_block *sb) { struct ovl_fs *ofs = sb->s_fs_info; - return ofs->config.redirect_dir; -} - -void ovl_clear_redirect_dir(struct super_block *sb) -{ - struct ovl_fs *ofs = sb->s_fs_info; - - ofs->config.redirect_dir = false; + return ofs->config.redirect_dir && !ofs->noxattr; } const char *ovl_dentry_get_redirect(struct dentry *dentry) From 3d27573ce32b47ba54e6680c77c26a700d67cc16 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 19 May 2017 09:33:49 +0200 Subject: [PATCH 0061/1065] ovl: remove unused arg from ovl_lookup_temp() Signed-off-by: Miklos Szeredi --- fs/overlayfs/copy_up.c | 2 +- fs/overlayfs/dir.c | 8 ++++---- fs/overlayfs/overlayfs.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index f92ab35d43a6..843ed2a2d7db 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -346,7 +346,7 @@ static int ovl_copy_up_locked(struct dentry *workdir, struct dentry *upperdir, if (tmpfile) temp = ovl_do_tmpfile(upperdir, stat->mode); else - temp = ovl_lookup_temp(workdir, dentry); + temp = ovl_lookup_temp(workdir); err = 0; if (IS_ERR(temp)) { err = PTR_ERR(temp); diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c index 80e0e202a346..369ee7c4cdc0 100644 --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -41,7 +41,7 @@ void ovl_cleanup(struct inode *wdir, struct dentry *wdentry) } } -struct dentry *ovl_lookup_temp(struct dentry *workdir, struct dentry *dentry) +struct dentry *ovl_lookup_temp(struct dentry *workdir) { struct dentry *temp; char name[20]; @@ -68,7 +68,7 @@ static struct dentry *ovl_whiteout(struct dentry *workdir, struct dentry *whiteout; struct inode *wdir = workdir->d_inode; - whiteout = ovl_lookup_temp(workdir, dentry); + whiteout = ovl_lookup_temp(workdir); if (IS_ERR(whiteout)) return whiteout; @@ -261,7 +261,7 @@ static struct dentry *ovl_clear_empty(struct dentry *dentry, if (upper->d_parent->d_inode != udir) goto out_unlock; - opaquedir = ovl_lookup_temp(workdir, dentry); + opaquedir = ovl_lookup_temp(workdir); err = PTR_ERR(opaquedir); if (IS_ERR(opaquedir)) goto out_unlock; @@ -393,7 +393,7 @@ static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode, if (err) goto out; - newdentry = ovl_lookup_temp(workdir, dentry); + newdentry = ovl_lookup_temp(workdir); err = PTR_ERR(newdentry); if (IS_ERR(newdentry)) goto out_unlock; diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h index 505b18b56330..7c56932bfc2f 100644 --- a/fs/overlayfs/overlayfs.h +++ b/fs/overlayfs/overlayfs.h @@ -262,7 +262,7 @@ static inline void ovl_copyattr(struct inode *from, struct inode *to) /* dir.c */ extern const struct inode_operations ovl_dir_inode_operations; -struct dentry *ovl_lookup_temp(struct dentry *workdir, struct dentry *dentry); +struct dentry *ovl_lookup_temp(struct dentry *workdir); struct cattr { dev_t rdev; umode_t mode; From ee1d6d37b6b884383b501089be93ce94f2153028 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Thu, 11 May 2017 16:42:26 +0300 Subject: [PATCH 0062/1065] ovl: mark upper dir with type origin entries "impure" When moving a merge dir or non-dir with copy up origin into a non-merge upper dir (a.k.a pure upper dir), we are marking the target parent dir "impure". ovl_iterate() iterates pure upper dirs directly, because there is no need to filter out whiteouts and merge dir content with lower dir. But for the case of an "impure" upper dir, ovl_iterate() will not be able to iterate the real upper dir directly, because it will need to lookup the origin inode and use it to fill d_ino. Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/dir.c | 45 ++++++++++++++++++++++++++++++++++++++++ fs/overlayfs/namei.c | 18 ++++++++++++++-- fs/overlayfs/overlayfs.h | 3 +++ fs/overlayfs/ovl_entry.h | 1 + fs/overlayfs/util.c | 14 +++++++++++++ 5 files changed, 79 insertions(+), 2 deletions(-) diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c index 369ee7c4cdc0..f2a118ba00e4 100644 --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -149,6 +149,22 @@ static int ovl_set_opaque(struct dentry *dentry, struct dentry *upperdentry) return ovl_set_opaque_xerr(dentry, upperdentry, -EIO); } +static int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry) +{ + int err; + + /* + * Do not fail when upper doesn't support xattrs. + * Upper inodes won't have origin nor redirect xattr anyway. + */ + err = ovl_check_setxattr(dentry, upperdentry, OVL_XATTR_IMPURE, + "y", 1, 0); + if (!err) + ovl_dentry_set_impure(dentry); + + return err; +} + /* Common operations required to be done after creation of file on upper */ static void ovl_instantiate(struct dentry *dentry, struct inode *inode, struct dentry *newdentry, bool hardlink) @@ -173,6 +189,11 @@ static bool ovl_type_merge(struct dentry *dentry) return OVL_TYPE_MERGE(ovl_path_type(dentry)); } +static bool ovl_type_origin(struct dentry *dentry) +{ + return OVL_TYPE_ORIGIN(ovl_path_type(dentry)); +} + static int ovl_create_upper(struct dentry *dentry, struct inode *inode, struct cattr *attr, struct dentry *hardlink) { @@ -952,6 +973,30 @@ static int ovl_rename(struct inode *olddir, struct dentry *old, old_upperdir = ovl_dentry_upper(old->d_parent); new_upperdir = ovl_dentry_upper(new->d_parent); + if (!samedir) { + /* + * When moving a merge dir or non-dir with copy up origin into + * a non-merge upper dir (a.k.a pure upper dir), we are making + * the target parent dir "impure". ovl_iterate() iterates pure + * upper dirs directly, because there is no need to filter out + * whiteouts and merge dir content with lower dir. But for the + * case of an "impure" upper dir, ovl_iterate() cannot iterate + * the real directory directly, because it looks for the inode + * numbers to fill d_ino in the entries origin inode. + */ + if (ovl_type_origin(old) && !ovl_type_merge(new->d_parent)) { + err = ovl_set_impure(new->d_parent, new_upperdir); + if (err) + goto out_revert_creds; + } + if (!overwrite && ovl_type_origin(new) && + !ovl_type_merge(old->d_parent)) { + err = ovl_set_impure(old->d_parent, old_upperdir); + if (err) + goto out_revert_creds; + } + } + trap = lock_rename(new_upperdir, old_upperdir); olddentry = lookup_one_len(old->d_name.name, old_upperdir, diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c index bad0f665a635..0c72a5909db2 100644 --- a/fs/overlayfs/namei.c +++ b/fs/overlayfs/namei.c @@ -167,7 +167,7 @@ invalid: goto out; } -static bool ovl_is_opaquedir(struct dentry *dentry) +static bool ovl_check_dir_xattr(struct dentry *dentry, const char *name) { int res; char val; @@ -175,13 +175,23 @@ static bool ovl_is_opaquedir(struct dentry *dentry) if (!d_is_dir(dentry)) return false; - res = vfs_getxattr(dentry, OVL_XATTR_OPAQUE, &val, 1); + res = vfs_getxattr(dentry, name, &val, 1); if (res == 1 && val == 'y') return true; return false; } +static bool ovl_is_opaquedir(struct dentry *dentry) +{ + return ovl_check_dir_xattr(dentry, OVL_XATTR_OPAQUE); +} + +static bool ovl_is_impuredir(struct dentry *dentry) +{ + return ovl_check_dir_xattr(dentry, OVL_XATTR_IMPURE); +} + static int ovl_lookup_single(struct dentry *base, struct ovl_lookup_data *d, const char *name, unsigned int namelen, size_t prelen, const char *post, @@ -351,6 +361,7 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, unsigned int ctr = 0; struct inode *inode = NULL; bool upperopaque = false; + bool upperimpure = false; char *upperredirect = NULL; struct dentry *this; unsigned int i; @@ -395,6 +406,8 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, poe = roe; } upperopaque = d.opaque; + if (upperdentry && d.is_dir) + upperimpure = ovl_is_impuredir(upperdentry); } if (!d.stop && poe->numlower) { @@ -463,6 +476,7 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, revert_creds(old_cred); oe->opaque = upperopaque; + oe->impure = upperimpure; oe->redirect = upperredirect; oe->__upperdentry = upperdentry; memcpy(oe->lowerstack, stack, sizeof(struct path) * ctr); diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h index 7c56932bfc2f..a9fb958fd5d4 100644 --- a/fs/overlayfs/overlayfs.h +++ b/fs/overlayfs/overlayfs.h @@ -24,6 +24,7 @@ enum ovl_path_type { #define OVL_XATTR_OPAQUE OVL_XATTR_PREFIX "opaque" #define OVL_XATTR_REDIRECT OVL_XATTR_PREFIX "redirect" #define OVL_XATTR_ORIGIN OVL_XATTR_PREFIX "origin" +#define OVL_XATTR_IMPURE OVL_XATTR_PREFIX "impure" /* * The tuple (fh,uuid) is a universal unique identifier for a copy up origin, @@ -203,8 +204,10 @@ struct dentry *ovl_dentry_real(struct dentry *dentry); struct ovl_dir_cache *ovl_dir_cache(struct dentry *dentry); void ovl_set_dir_cache(struct dentry *dentry, struct ovl_dir_cache *cache); bool ovl_dentry_is_opaque(struct dentry *dentry); +bool ovl_dentry_is_impure(struct dentry *dentry); bool ovl_dentry_is_whiteout(struct dentry *dentry); void ovl_dentry_set_opaque(struct dentry *dentry); +void ovl_dentry_set_impure(struct dentry *dentry); bool ovl_redirect_dir(struct super_block *sb); const char *ovl_dentry_get_redirect(struct dentry *dentry); void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect); diff --git a/fs/overlayfs/ovl_entry.h b/fs/overlayfs/ovl_entry.h index ad86c0a302eb..34bc4a9f5c61 100644 --- a/fs/overlayfs/ovl_entry.h +++ b/fs/overlayfs/ovl_entry.h @@ -43,6 +43,7 @@ struct ovl_entry { u64 version; const char *redirect; bool opaque; + bool impure; bool copying; }; struct rcu_head rcu; diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index 4d541a8d0834..e0dfb07d5457 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -175,6 +175,13 @@ bool ovl_dentry_is_opaque(struct dentry *dentry) return oe->opaque; } +bool ovl_dentry_is_impure(struct dentry *dentry) +{ + struct ovl_entry *oe = dentry->d_fsdata; + + return oe->impure; +} + bool ovl_dentry_is_whiteout(struct dentry *dentry) { return !dentry->d_inode && ovl_dentry_is_opaque(dentry); @@ -187,6 +194,13 @@ void ovl_dentry_set_opaque(struct dentry *dentry) oe->opaque = true; } +void ovl_dentry_set_impure(struct dentry *dentry) +{ + struct ovl_entry *oe = dentry->d_fsdata; + + oe->impure = true; +} + bool ovl_redirect_dir(struct super_block *sb) { struct ovl_fs *ofs = sb->s_fs_info; From 53bf9590151e06e3f74212fea8da2eca2385db76 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 25 Apr 2017 03:14:54 +0000 Subject: [PATCH 0063/1065] phy: qcom-qmp: fix return value check in qcom_qmp_phy_create() In case of error, the function of_iomap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Reviewed-by: Vivek Gautam Signed-off-by: Wei Yongjun Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-qcom-qmp.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/phy/phy-qcom-qmp.c b/drivers/phy/phy-qcom-qmp.c index 727e23be7cac..a25c29d5fdf6 100644 --- a/drivers/phy/phy-qcom-qmp.c +++ b/drivers/phy/phy-qcom-qmp.c @@ -983,16 +983,16 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. */ qphy->tx = of_iomap(np, 0); - if (IS_ERR(qphy->tx)) - return PTR_ERR(qphy->tx); + if (!qphy->tx) + return -ENOMEM; qphy->rx = of_iomap(np, 1); - if (IS_ERR(qphy->rx)) - return PTR_ERR(qphy->rx); + if (!qphy->rx) + return -ENOMEM; qphy->pcs = of_iomap(np, 2); - if (IS_ERR(qphy->pcs)) - return PTR_ERR(qphy->pcs); + if (!qphy->pcs) + return -ENOMEM; /* * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3 From 46cd902f6d9a746f0da816cbdfb04b9baf6d7967 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Thu, 11 May 2017 18:07:42 +0800 Subject: [PATCH 0064/1065] drm/i915: set initialised only when init_context callback is NULL During execlist_context_deferred_alloc() we presumed that the context is uninitialised (we only just allocated the state object for it!) and chose to optimise away the later call to engine->init_context() if engine->init_context were NULL. This breaks with GVT's contexts that are marked as pre-initialised to avoid us annoyingly calling engine->init_context(). The fix is to not override ce->initialised if it is already true. Cc: Chris Wilson Signed-off-by: Chuanxiao Dong Link: http://patchwork.freedesktop.org/patch/msgid/1494497262-24855-1-git-send-email-chuanxiao.dong@intel.com Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson (cherry picked from commit 0d402a24df8c8160727af934d83293f3d44d31a3) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_lrc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index c8f7c631fc1f..dac4e003c1f3 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -1989,7 +1989,7 @@ static int execlists_context_deferred_alloc(struct i915_gem_context *ctx, ce->ring = ring; ce->state = vma; - ce->initialised = engine->init_context == NULL; + ce->initialised |= engine->init_context == NULL; return 0; From 36d4d68cd658d914ef73ac845705c4a89e7d9e2f Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 5 Apr 2017 16:26:17 +0200 Subject: [PATCH 0065/1065] batman-adv: Fix rx packet/bytes stats on local ARP reply The stats are generated by batadv_interface_stats and must not be stored directly in the net_device stats member variable. The batadv_priv bat_counters information is assembled when ndo_get_stats is called. The stats previously stored in net_device::stats is then overwritten. The batman-adv counters must therefore be increased when an ARP packet is answered locally via the distributed arp table. Fixes: c384ea3ec930 ("batman-adv: Distributed ARP Table - add snooping functions for ARP messages") Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/distributed-arp-table.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index 013e970eff39..000ca2f113ab 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -1064,8 +1064,9 @@ bool batadv_dat_snoop_outgoing_arp_request(struct batadv_priv *bat_priv, skb_new->protocol = eth_type_trans(skb_new, soft_iface); - soft_iface->stats.rx_packets++; - soft_iface->stats.rx_bytes += skb->len + ETH_HLEN + hdr_size; + batadv_inc_counter(bat_priv, BATADV_CNT_RX); + batadv_add_counter(bat_priv, BATADV_CNT_RX_BYTES, + skb->len + ETH_HLEN + hdr_size); netif_rx(skb_new); batadv_dbg(BATADV_DBG_DAT, bat_priv, "ARP request replied locally\n"); From a1a745ef980a1b48299ead4ea7990e62c0516f6e Mon Sep 17 00:00:00 2001 From: Andreas Pape Date: Fri, 19 May 2017 10:01:42 +0200 Subject: [PATCH 0066/1065] batman-adv: fix memory leak when dropping packet from other gateway The skb must be released in the receive handler since b91a2543b4c1 ("batman-adv: Consume skb in receive handlers"). Just returning NET_RX_DROP will no longer automatically free the memory. This results in memory leaks when unicast packets from other backbones must be dropped because they share a common backbone. Fixes: 9e794b6bf4a2 ("batman-adv: drop unicast packets from other backbone gw") Signed-off-by: Andreas Pape [sven@narfation.org: adjust commit message] Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/routing.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index e1ebe14ee2a6..ae9f4d37d34f 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -987,7 +987,7 @@ int batadv_recv_unicast_packet(struct sk_buff *skb, batadv_dbg(BATADV_DBG_BLA, bat_priv, "recv_unicast_packet(): Dropped unicast pkt received from another backbone gw %pM.\n", orig_addr_gw); - return NET_RX_DROP; + goto free_skb; } } From 1f8754d4daea5f257370a52a30fcb22798c54516 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 16 May 2017 01:48:24 +0000 Subject: [PATCH 0067/1065] ASoC: rsnd: don't call free_irq() on Parent SSI If SSI uses shared pin, some SSI will be used as parent SSI. Then, normal SSI's remove and Parent SSI's remove (these are same SSI) will be called when unbind or remove timing. In this case, free_irq() will be called twice. This patch solve this issue. Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Reported-by: Hiroyuki Yokoyama Signed-off-by: Mark Brown --- sound/soc/sh/rcar/ssi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index e43277a5068c..c224695c1484 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -709,6 +709,11 @@ static int rsnd_ssi_dma_remove(struct rsnd_mod *mod, struct rsnd_priv *priv) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); + struct rsnd_mod *ssi_parent_mod = rsnd_io_to_mod_ssip(io); + + /* Do nothing for SSI parent mod */ + if (ssi_parent_mod == mod) + return 0; /* PIO will request IRQ again */ free_irq(ssi->irq, mod); From f746aa5e8636c83e53bbb2d988bb614f732b2b80 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 15 May 2017 14:00:31 -0700 Subject: [PATCH 0068/1065] ASoC: simple-card: fix mic jack initialization Initialize asoc_simple_card_init_mic with the correct struct asoc_simple_jack. Fixes: 9eac361877b3 ("ASoC: simple-card: add new asoc_simple_jack and use it") Signed-off-by: Stefan Agner Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/simple-card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 2c9dedab5184..bc136d2bd7cd 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -202,7 +202,7 @@ static int asoc_simple_card_dai_init(struct snd_soc_pcm_runtime *rtd) if (ret < 0) return ret; - ret = asoc_simple_card_init_mic(rtd->card, &priv->hp_jack, PREFIX); + ret = asoc_simple_card_init_mic(rtd->card, &priv->mic_jack, PREFIX); if (ret < 0) return ret; From 623d8c095cb3351564d4dd8e3b449163a07cbd47 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 15 May 2017 10:50:00 +0200 Subject: [PATCH 0069/1065] arm64: allwinner: h5: Remove syslink to shared DTSI The arm64 H5 and arm H3 SoCs share roughly the same base, and therefore share a significant part of their device tree. The approach we took was to add a symlink from the arm64 DTSI to the arm DTSI. Now that the arm DT folder is exposed in the include path, we can just use it and remove our symlink. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 2 +- arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) delete mode 120000 arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 4d314a253fd9..732e2e06f503 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -40,7 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "sunxi-h3-h5.dtsi" +#include / { cpus { diff --git a/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi b/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi deleted file mode 120000 index 036f01dc2b9b..000000000000 --- a/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi +++ /dev/null @@ -1 +0,0 @@ -../../../../arm/boot/dts/sunxi-h3-h5.dtsi \ No newline at end of file From 4eecbe81885180c9f6217ecfd679b1f285967218 Mon Sep 17 00:00:00 2001 From: Marcin Niestroj Date: Thu, 18 May 2017 09:12:06 +0200 Subject: [PATCH 0070/1065] iio: trigger: fix NULL pointer dereference in iio_trigger_write_current() In case oldtrig == trig == NULL (which happens when we set none trigger, when there is already none set) there is a NULL pointer dereference during iio_trigger_put(trig). Below is kernel output when this occurs: [ 26.741790] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 26.750179] pgd = cacc0000 [ 26.752936] [00000000] *pgd=8adc6835, *pte=00000000, *ppte=00000000 [ 26.759531] Internal error: Oops: 17 [#1] SMP ARM [ 26.764261] Modules linked in: usb_f_ncm u_ether usb_f_acm u_serial usb_f_fs libcomposite configfs evbug [ 26.773844] CPU: 0 PID: 152 Comm: synchro Not tainted 4.12.0-rc1 #2 [ 26.780128] Hardware name: Freescale i.MX6 Ultralite (Device Tree) [ 26.786329] task: cb1de200 task.stack: cac92000 [ 26.790892] PC is at iio_trigger_write_current+0x188/0x1f4 [ 26.796403] LR is at lock_release+0xf8/0x20c [ 26.800696] pc : [] lr : [] psr: 600d0013 [ 26.800696] sp : cac93e30 ip : cac93db0 fp : cac93e5c [ 26.812193] r10: c0e64fe8 r9 : 00000000 r8 : 00000001 [ 26.817436] r7 : cb190810 r6 : 00000010 r5 : 00000001 r4 : 00000000 [ 26.823982] r3 : 00000000 r2 : 00000000 r1 : cb1de200 r0 : 00000000 [ 26.830528] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 26.837683] Control: 10c5387d Table: 8acc006a DAC: 00000051 [ 26.843448] Process synchro (pid: 152, stack limit = 0xcac92210) [ 26.849475] Stack: (0xcac93e30 to 0xcac94000) [ 26.853857] 3e20: 00000001 c0736dac c054033c cae6b680 [ 26.862060] 3e40: cae6b680 00000000 00000001 cb3f8610 cac93e74 cac93e60 c054035c c0736db8 [ 26.870264] 3e60: 00000001 c054033c cac93e94 cac93e78 c029bf34 c0540348 00000000 00000000 [ 26.878469] 3e80: cb3f8600 cae6b680 cac93ed4 cac93e98 c029b320 c029bef0 00000000 00000000 [ 26.886672] 3ea0: 00000000 cac93f78 cb2d41fc caed3280 c029b214 cac93f78 00000001 000e20f8 [ 26.894874] 3ec0: 00000001 00000000 cac93f44 cac93ed8 c0221dcc c029b220 c0e1ca39 cb2d41fc [ 26.903079] 3ee0: cac93f04 cac93ef0 c0183ef0 c0183ab0 cb2d41fc 00000000 cac93f44 cac93f08 [ 26.911282] 3f00: c0225eec c0183ebc 00000001 00000000 c0223728 00000000 c0245454 00000001 [ 26.919485] 3f20: 00000001 caed3280 000e20f8 cac93f78 000e20f8 00000001 cac93f74 cac93f48 [ 26.927690] 3f40: c0223680 c0221da4 c0246520 c0245460 caed3283 caed3280 00000000 00000000 [ 26.935893] 3f60: 000e20f8 00000001 cac93fa4 cac93f78 c0224520 c02235e4 00000000 00000000 [ 26.944096] 3f80: 00000001 000e20f8 00000001 00000004 c0107f84 cac92000 00000000 cac93fa8 [ 26.952299] 3fa0: c0107de0 c02244e8 00000001 000e20f8 0000000e 000e20f8 00000001 fbad2484 [ 26.960502] 3fc0: 00000001 000e20f8 00000001 00000004 beb6b698 00064260 0006421c beb6b4b4 [ 26.968705] 3fe0: 00000000 beb6b450 b6f219a0 b6e2f268 800d0010 0000000e cac93ff4 cac93ffc [ 26.976896] Backtrace: [ 26.979388] [] (iio_trigger_write_current) from [] (dev_attr_store+0x20/0x2c) [ 26.988289] r10:cb3f8610 r9:00000001 r8:00000000 r7:cae6b680 r6:cae6b680 r5:c054033c [ 26.996138] r4:c0736dac r3:00000001 [ 26.999747] [] (dev_attr_store) from [] (sysfs_kf_write+0x50/0x54) [ 27.007686] r5:c054033c r4:00000001 [ 27.011290] [] (sysfs_kf_write) from [] (kernfs_fop_write+0x10c/0x224) [ 27.019579] r7:cae6b680 r6:cb3f8600 r5:00000000 r4:00000000 [ 27.025271] [] (kernfs_fop_write) from [] (__vfs_write+0x34/0x120) [ 27.033214] r10:00000000 r9:00000001 r8:000e20f8 r7:00000001 r6:cac93f78 r5:c029b214 [ 27.041059] r4:caed3280 [ 27.043622] [] (__vfs_write) from [] (vfs_write+0xa8/0x170) [ 27.050959] r9:00000001 r8:000e20f8 r7:cac93f78 r6:000e20f8 r5:caed3280 r4:00000001 [ 27.058731] [] (vfs_write) from [] (SyS_write+0x44/0x98) [ 27.065806] r9:00000001 r8:000e20f8 r7:00000000 r6:00000000 r5:caed3280 r4:caed3283 [ 27.073582] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x1c) [ 27.081179] r9:cac92000 r8:c0107f84 r7:00000004 r6:00000001 r5:000e20f8 r4:00000001 [ 27.088947] Code: 1a000009 e1a04009 e3a06010 e1a05008 (e5943000) [ 27.095244] ---[ end trace 06d1dab86d6e6bab ]--- To fix that problem call iio_trigger_put(trig) only when trig is not NULL. Fixes: d5d24bcc0a10 ("iio: trigger: close race condition in acquiring trigger reference") Signed-off-by: Marcin Niestroj Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-trigger.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c index 978e1592c2a3..4061fed93f1f 100644 --- a/drivers/iio/industrialio-trigger.c +++ b/drivers/iio/industrialio-trigger.c @@ -451,7 +451,8 @@ static ssize_t iio_trigger_write_current(struct device *dev, return len; out_trigger_put: - iio_trigger_put(trig); + if (trig) + iio_trigger_put(trig); return ret; } From f7d86ecf83cb66d3c4c6ac4edb1dd50c0919aa2b Mon Sep 17 00:00:00 2001 From: Raveendra Padasalagi Date: Tue, 16 May 2017 12:22:42 +0530 Subject: [PATCH 0071/1065] iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's The third argument of devm_request_threaded_irq() is the primary handler. It is called in hardirq context and checks whether the interrupt is relevant to the device. If the primary handler returns IRQ_WAKE_THREAD, the secondary handler (a.k.a. handler thread) is scheduled to run in process context. bcm_iproc_adc.c uses the secondary handler as the primary one and the other way around. So this patch fixes the same, along with re-naming the secondary handler and primary handler names properly. Tested on the BCM9583XX iProc SoC based boards. Fixes: 4324c97ecedc ("iio: Add driver for Broadcom iproc-static-adc") Reported-by: Pavel Roskin Signed-off-by: Raveendra Padasalagi Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/bcm_iproc_adc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c index 21d38c8af21e..7f4f9c4150e3 100644 --- a/drivers/iio/adc/bcm_iproc_adc.c +++ b/drivers/iio/adc/bcm_iproc_adc.c @@ -143,7 +143,7 @@ static void iproc_adc_reg_dump(struct iio_dev *indio_dev) iproc_adc_dbg_reg(dev, adc_priv, IPROC_SOFT_BYPASS_DATA); } -static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data) +static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data) { u32 channel_intr_status; u32 intr_status; @@ -167,7 +167,7 @@ static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data) return IRQ_NONE; } -static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data) +static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data) { irqreturn_t retval = IRQ_NONE; struct iproc_adc_priv *adc_priv; @@ -181,7 +181,7 @@ static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data) adc_priv = iio_priv(indio_dev); regmap_read(adc_priv->regmap, IPROC_INTERRUPT_STATUS, &intr_status); - dev_dbg(&indio_dev->dev, "iproc_adc_interrupt_thread(),INTRPT_STS:%x\n", + dev_dbg(&indio_dev->dev, "iproc_adc_interrupt_handler(),INTRPT_STS:%x\n", intr_status); intr_channels = (intr_status & IPROC_ADC_INTR_MASK) >> IPROC_ADC_INTR; @@ -566,8 +566,8 @@ static int iproc_adc_probe(struct platform_device *pdev) } ret = devm_request_threaded_irq(&pdev->dev, adc_priv->irqno, - iproc_adc_interrupt_thread, iproc_adc_interrupt_handler, + iproc_adc_interrupt_thread, IRQF_SHARED, "iproc-adc", indio_dev); if (ret) { dev_err(&pdev->dev, "request_irq error %d\n", ret); From 7cc3bff4efe6164a0c8163331c8aa55454799f42 Mon Sep 17 00:00:00 2001 From: Franziska Naepelt Date: Wed, 17 May 2017 12:41:19 +0200 Subject: [PATCH 0072/1065] iio: light: ltr501 Fix interchanged als/ps register field The register mapping for the IIO driver for the Liteon Light and Proximity sensor LTR501 interrupt mode is interchanged (ALS/PS). There is a register called INTERRUPT register (address 0x8F) Bit 0 represents PS measurement trigger. Bit 1 represents ALS measurement trigger. This two bit fields are interchanged within the driver. see datasheet page 24: http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/S_110_LTR-501ALS-01_PrelimDS_ver1%5B1%5D.pdf Signed-off-by: Franziska Naepelt Fixes: 7ac702b3144b6 ("iio: ltr501: Add interrupt support") Acked-by: Peter Meerwald-Stadler Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/ltr501.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c index b30e0c1c6cc4..67838edd8b37 100644 --- a/drivers/iio/light/ltr501.c +++ b/drivers/iio/light/ltr501.c @@ -74,9 +74,9 @@ static const int int_time_mapping[] = {100000, 50000, 200000, 400000}; static const struct reg_field reg_field_it = REG_FIELD(LTR501_ALS_MEAS_RATE, 3, 4); static const struct reg_field reg_field_als_intr = - REG_FIELD(LTR501_INTR, 0, 0); -static const struct reg_field reg_field_ps_intr = REG_FIELD(LTR501_INTR, 1, 1); +static const struct reg_field reg_field_ps_intr = + REG_FIELD(LTR501_INTR, 0, 0); static const struct reg_field reg_field_als_rate = REG_FIELD(LTR501_ALS_MEAS_RATE, 0, 2); static const struct reg_field reg_field_ps_rate = From 82237f268281d338aa35cd014be8ffb0b5445482 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Thu, 18 May 2017 08:36:07 +0200 Subject: [PATCH 0073/1065] iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function For the sake of DT binding stability, this IIO driver is a child of an MFD driver for Allwinner A10, A13 and A31 because there already exists a DT binding for this IP. The MFD driver has a DT node but the IIO driver does not. The IIO device registers the temperature sensor in the thermal framework using the DT node of the parent, the MFD device, so the thermal framework could match the phandle to the MFD device in the DT and the struct device used to register in the thermal framework. devm_thermal_zone_of_sensor_register was previously used to register the thermal sensor with the parent struct device of the IIO device, representing the MFD device. By doing so, we registered actually the parent in the devm routine and not the actual IIO device. This lead to the devm unregister function not being called when the IIO module driver is removed. It resulted in the thermal framework still polling the get_temp function of the IIO module while the device doesn't exist anymore, thus generated a kernel panic. Use the non-devm function instead and do the unregister manually in the remove function. Fixes: d1caa9905538 ("iio: adc: add support for Allwinner SoCs ADC") Signed-off-by: Quentin Schulz Reported-by: Corentin Labbe Reviewed-by: Maxime Ripard Signed-off-by: Jonathan Cameron --- drivers/iio/adc/sun4i-gpadc-iio.c | 36 +++++++++++++++++++------------ 1 file changed, 22 insertions(+), 14 deletions(-) diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c index 1c83b45043bf..81d4c39e414a 100644 --- a/drivers/iio/adc/sun4i-gpadc-iio.c +++ b/drivers/iio/adc/sun4i-gpadc-iio.c @@ -105,6 +105,8 @@ struct sun4i_gpadc_iio { bool no_irq; /* prevents concurrent reads of temperature and ADC */ struct mutex mutex; + struct thermal_zone_device *tzd; + struct device *sensor_device; }; #define SUN4I_GPADC_ADC_CHANNEL(_channel, _name) { \ @@ -502,7 +504,6 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev, { struct sun4i_gpadc_iio *info = iio_priv(indio_dev); const struct of_device_id *of_dev; - struct thermal_zone_device *tzd; struct resource *mem; void __iomem *base; int ret; @@ -532,13 +533,14 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev, if (!IS_ENABLED(CONFIG_THERMAL_OF)) return 0; - tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, info, - &sun4i_ts_tz_ops); - if (IS_ERR(tzd)) + info->sensor_device = &pdev->dev; + info->tzd = thermal_zone_of_sensor_register(info->sensor_device, 0, + info, &sun4i_ts_tz_ops); + if (IS_ERR(info->tzd)) dev_err(&pdev->dev, "could not register thermal sensor: %ld\n", - PTR_ERR(tzd)); + PTR_ERR(info->tzd)); - return PTR_ERR_OR_ZERO(tzd); + return PTR_ERR_OR_ZERO(info->tzd); } static int sun4i_gpadc_probe_mfd(struct platform_device *pdev, @@ -584,15 +586,15 @@ static int sun4i_gpadc_probe_mfd(struct platform_device *pdev, * of_node, and the device from this driver as third argument to * return the temperature. */ - struct thermal_zone_device *tzd; - tzd = devm_thermal_zone_of_sensor_register(pdev->dev.parent, 0, - info, - &sun4i_ts_tz_ops); - if (IS_ERR(tzd)) { + info->sensor_device = pdev->dev.parent; + info->tzd = thermal_zone_of_sensor_register(info->sensor_device, + 0, info, + &sun4i_ts_tz_ops); + if (IS_ERR(info->tzd)) { dev_err(&pdev->dev, "could not register thermal sensor: %ld\n", - PTR_ERR(tzd)); - return PTR_ERR(tzd); + PTR_ERR(info->tzd)); + return PTR_ERR(info->tzd); } } else { indio_dev->num_channels = @@ -688,7 +690,13 @@ static int sun4i_gpadc_remove(struct platform_device *pdev) pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); - if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF)) + + if (!IS_ENABLED(CONFIG_THERMAL_OF)) + return 0; + + thermal_zone_of_sensor_unregister(info->sensor_device, info->tzd); + + if (!info->no_irq) iio_map_array_unregister(indio_dev); return 0; From 964edf66bf9ab70cb387b27946c0aef7b94c4d1b Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sun, 21 May 2017 22:31:23 -0400 Subject: [PATCH 0074/1065] ext4: clear lockdep subtype for quota files on quota off Quota files have special ranking of i_data_sem lock. We inform lockdep about it when turning on quotas however when turning quotas off, we don't clear the lockdep subclass from i_data_sem lock and thus when the inode gets later reused for a normal file or directory, lockdep gets confused and complains about possible deadlocks. Fix the problem by resetting lockdep subclass of i_data_sem on quota off. Cc: stable@vger.kernel.org Fixes: daf647d2dd58cec59570d7698a45b98e580f2076 Reported-and-tested-by: Ross Zwisler Reviewed-by: Andreas Dilger Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 0b177da9ea82..8f05c72bc4ec 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -848,14 +848,9 @@ static inline void ext4_quota_off_umount(struct super_block *sb) { int type; - if (ext4_has_feature_quota(sb)) { - dquot_disable(sb, -1, - DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED); - } else { - /* Use our quota_off function to clear inode flags etc. */ - for (type = 0; type < EXT4_MAXQUOTAS; type++) - ext4_quota_off(sb, type); - } + /* Use our quota_off function to clear inode flags etc. */ + for (type = 0; type < EXT4_MAXQUOTAS; type++) + ext4_quota_off(sb, type); } #else static inline void ext4_quota_off_umount(struct super_block *sb) @@ -5485,7 +5480,7 @@ static int ext4_quota_off(struct super_block *sb, int type) goto out; err = dquot_quota_off(sb, type); - if (err) + if (err || ext4_has_feature_quota(sb)) goto out_put; inode_lock(inode); @@ -5505,6 +5500,7 @@ static int ext4_quota_off(struct super_block *sb, int type) out_unlock: inode_unlock(inode); out_put: + lockdep_set_quota_inode(inode, I_DATA_SEM_NORMAL); iput(inode); return err; out: From b4709067ac0944e4a5b94eabdc26155c6f2efbd7 Mon Sep 17 00:00:00 2001 From: Tahsin Erdogan Date: Sun, 21 May 2017 22:32:23 -0400 Subject: [PATCH 0075/1065] jbd2: preserve original nofs flag during journal restart When a transaction starts, start_this_handle() saves current PF_MEMALLOC_NOFS value so that it can be restored at journal stop time. Journal restart is a special case that calls start_this_handle() without stopping the transaction. start_this_handle() isn't aware that the original value is already stored so it overwrites it with current value. For instance, a call sequence like below leaves PF_MEMALLOC_NOFS flag set at the end: jbd2_journal_start() jbd2__journal_restart() jbd2_journal_stop() Make jbd2__journal_restart() restore the original value before calling start_this_handle(). Fixes: 81378da64de6 ("jbd2: mark the transaction context with the scope GFP_NOFS context") Signed-off-by: Tahsin Erdogan Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara --- fs/jbd2/transaction.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 9ee4832b6f8b..2d30a6da7013 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -680,6 +680,12 @@ int jbd2__journal_restart(handle_t *handle, int nblocks, gfp_t gfp_mask) rwsem_release(&journal->j_trans_commit_map, 1, _THIS_IP_); handle->h_buffer_credits = nblocks; + /* + * Restore the original nofs context because the journal restart + * is basically the same thing as journal stop and start. + * start_this_handle will start a new nofs context. + */ + memalloc_nofs_restore(handle->saved_alloc_context); ret = start_this_handle(journal, handle, gfp_mask); return ret; } From 7d95eddf313c88b24f99d4ca9c2411a4b82fef33 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sun, 21 May 2017 22:33:23 -0400 Subject: [PATCH 0076/1065] ext4: fix SEEK_HOLE Currently, SEEK_HOLE implementation in ext4 may both return that there's a hole at some offset although that offset already has data and skip some holes during a search for the next hole. The first problem is demostrated by: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (2.054 GiB/sec and 538461.5385 ops/sec) Whence Result HOLE 0 Where we can see that SEEK_HOLE wrongly returned offset 0 as containing a hole although we have written data there. The second problem can be demonstrated by: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (1.978 GiB/sec and 518518.5185 ops/sec) wrote 8192/8192 bytes at offset 131072 8 KiB, 2 ops; 0.0000 sec (2 GiB/sec and 500000.0000 ops/sec) Whence Result HOLE 139264 Where we can see that hole at offsets 56k..128k has been ignored by the SEEK_HOLE call. The underlying problem is in the ext4_find_unwritten_pgoff() which is just buggy. In some cases it fails to update returned offset when it finds a hole (when no pages are found or when the first found page has higher index than expected), in some cases conditions for detecting hole are just missing (we fail to detect a situation where indices of returned pages are not contiguous). Fix ext4_find_unwritten_pgoff() to properly detect non-contiguous page indices and also handle all cases where we got less pages then expected in one place and handle it properly there. CC: stable@vger.kernel.org Fixes: c8c0df241cc2719b1262e627f999638411934f60 CC: Zheng Liu Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/file.c | 50 ++++++++++++++------------------------------------ 1 file changed, 14 insertions(+), 36 deletions(-) diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 831fd6beebf0..bbea2dccd584 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -484,47 +484,27 @@ static int ext4_find_unwritten_pgoff(struct inode *inode, num = min_t(pgoff_t, end - index, PAGEVEC_SIZE); nr_pages = pagevec_lookup(&pvec, inode->i_mapping, index, (pgoff_t)num); - if (nr_pages == 0) { - if (whence == SEEK_DATA) - break; - - BUG_ON(whence != SEEK_HOLE); - /* - * If this is the first time to go into the loop and - * offset is not beyond the end offset, it will be a - * hole at this offset - */ - if (lastoff == startoff || lastoff < endoff) - found = 1; + if (nr_pages == 0) break; - } - - /* - * If this is the first time to go into the loop and - * offset is smaller than the first page offset, it will be a - * hole at this offset. - */ - if (lastoff == startoff && whence == SEEK_HOLE && - lastoff < page_offset(pvec.pages[0])) { - found = 1; - break; - } for (i = 0; i < nr_pages; i++) { struct page *page = pvec.pages[i]; struct buffer_head *bh, *head; /* - * If the current offset is not beyond the end of given - * range, it will be a hole. + * If current offset is smaller than the page offset, + * there is a hole at this offset. */ - if (lastoff < endoff && whence == SEEK_HOLE && - page->index > end) { + if (whence == SEEK_HOLE && lastoff < endoff && + lastoff < page_offset(pvec.pages[i])) { found = 1; *offset = lastoff; goto out; } + if (page->index > end) + goto out; + lock_page(page); if (unlikely(page->mapping != inode->i_mapping)) { @@ -564,20 +544,18 @@ static int ext4_find_unwritten_pgoff(struct inode *inode, unlock_page(page); } - /* - * The no. of pages is less than our desired, that would be a - * hole in there. - */ - if (nr_pages < num && whence == SEEK_HOLE) { - found = 1; - *offset = lastoff; + /* The no. of pages is less than our desired, we are done. */ + if (nr_pages < num) break; - } index = pvec.pages[i - 1]->index + 1; pagevec_release(&pvec); } while (index <= end); + if (whence == SEEK_HOLE && lastoff < endoff) { + found = 1; + *offset = lastoff; + } out: pagevec_release(&pvec); return found; From 3f1d5bad3fae983da07be01cff2fde13293bb7b9 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sun, 21 May 2017 22:34:23 -0400 Subject: [PATCH 0077/1065] ext4: fix off-by-in in loop termination in ext4_find_unwritten_pgoff() There is an off-by-one error in loop termination conditions in ext4_find_unwritten_pgoff() since 'end' may index a page beyond end of desired range if 'endoff' is page aligned. It doesn't have any visible effects but still it is good to fix it. Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/file.c b/fs/ext4/file.c index bbea2dccd584..2b00bf84c05b 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -474,7 +474,7 @@ static int ext4_find_unwritten_pgoff(struct inode *inode, endoff = (loff_t)end_blk << blkbits; index = startoff >> PAGE_SHIFT; - end = endoff >> PAGE_SHIFT; + end = (endoff - 1) >> PAGE_SHIFT; pagevec_init(&pvec, 0); do { From 9651e6b2e20648d04d5e1fe6479a3056047e8781 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Sun, 21 May 2017 22:35:23 -0400 Subject: [PATCH 0078/1065] ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors I've got another report about breaking ext4 by ENOMEM error returned from ext4_mb_load_buddy() caused by memory shortage in memory cgroup. This time inside ext4_discard_preallocations(). This patch replaces ext4_error() with ext4_warning() where errors returned from ext4_mb_load_buddy() are not fatal and handled by caller: * ext4_mb_discard_group_preallocations() - called before generating ENOSPC, we'll try to discard other group or return ENOSPC into user-space. * ext4_trim_all_free() - just stop trimming and return ENOMEM from ioctl. Some callers cannot handle errors, thus __GFP_NOFAIL is used for them: * ext4_discard_preallocations() * ext4_mb_discard_lg_preallocations() Fixes: adb7ef600cc9 ("ext4: use __GFP_NOFAIL in ext4_free_blocks()") Signed-off-by: Konstantin Khlebnikov Signed-off-by: Theodore Ts'o --- fs/ext4/mballoc.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 5083bce20ac4..b7928cddd539 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3887,7 +3887,8 @@ ext4_mb_discard_group_preallocations(struct super_block *sb, err = ext4_mb_load_buddy(sb, group, &e4b); if (err) { - ext4_error(sb, "Error loading buddy information for %u", group); + ext4_warning(sb, "Error %d loading buddy information for %u", + err, group); put_bh(bitmap_bh); return 0; } @@ -4044,10 +4045,11 @@ repeat: BUG_ON(pa->pa_type != MB_INODE_PA); group = ext4_get_group_number(sb, pa->pa_pstart); - err = ext4_mb_load_buddy(sb, group, &e4b); + err = ext4_mb_load_buddy_gfp(sb, group, &e4b, + GFP_NOFS|__GFP_NOFAIL); if (err) { - ext4_error(sb, "Error loading buddy information for %u", - group); + ext4_error(sb, "Error %d loading buddy information for %u", + err, group); continue; } @@ -4303,11 +4305,14 @@ ext4_mb_discard_lg_preallocations(struct super_block *sb, spin_unlock(&lg->lg_prealloc_lock); list_for_each_entry_safe(pa, tmp, &discard_list, u.pa_tmp_list) { + int err; group = ext4_get_group_number(sb, pa->pa_pstart); - if (ext4_mb_load_buddy(sb, group, &e4b)) { - ext4_error(sb, "Error loading buddy information for %u", - group); + err = ext4_mb_load_buddy_gfp(sb, group, &e4b, + GFP_NOFS|__GFP_NOFAIL); + if (err) { + ext4_error(sb, "Error %d loading buddy information for %u", + err, group); continue; } ext4_lock_group(sb, group); @@ -5127,8 +5132,8 @@ ext4_trim_all_free(struct super_block *sb, ext4_group_t group, ret = ext4_mb_load_buddy(sb, group, &e4b); if (ret) { - ext4_error(sb, "Error in loading buddy " - "information for %u", group); + ext4_warning(sb, "Error %d loading buddy information for %u", + ret, group); return ret; } bitmap = e4b.bd_bitmap; From 887a9730614727c4fff7cb756711b190593fc1df Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Sun, 21 May 2017 22:36:23 -0400 Subject: [PATCH 0079/1065] ext4: keep existing extra fields when inode expands ext4_expand_extra_isize() should clear only space between old and new size. Fixes: 6dd4ee7cab7e # v2.6.23 Cc: stable@vger.kernel.org Signed-off-by: Konstantin Khlebnikov Signed-off-by: Theodore Ts'o --- fs/ext4/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 1bd0bfa547f6..7cd99de8c4ba 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -5637,8 +5637,9 @@ static int ext4_expand_extra_isize(struct inode *inode, /* No extended attributes present */ if (!ext4_test_inode_state(inode, EXT4_STATE_XATTR) || header->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC)) { - memset((void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE, 0, - new_extra_isize); + memset((void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE + + EXT4_I(inode)->i_extra_isize, 0, + new_extra_isize - EXT4_I(inode)->i_extra_isize); EXT4_I(inode)->i_extra_isize = new_extra_isize; return 0; } From 2dffdc0724004f38f5e39907747b53e4b0d80e59 Mon Sep 17 00:00:00 2001 From: Guoqing Jiang Date: Tue, 16 May 2017 14:01:25 +0800 Subject: [PATCH 0080/1065] md-cluster: fix potential lock issue in add_new_disk The add_new_disk returns with communication locked if __sendmsg returns failure, fix it with call unlock_comm before return. Reported-by: Dan Carpenter CC: Goldwyn Rodrigues Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li --- drivers/md/md-cluster.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/md-cluster.c b/drivers/md/md-cluster.c index 7299ce2f08a8..03082e17c65c 100644 --- a/drivers/md/md-cluster.c +++ b/drivers/md/md-cluster.c @@ -1311,8 +1311,10 @@ static int add_new_disk(struct mddev *mddev, struct md_rdev *rdev) cmsg.raid_slot = cpu_to_le32(rdev->desc_nr); lock_comm(cinfo, 1); ret = __sendmsg(cinfo, &cmsg); - if (ret) + if (ret) { + unlock_comm(cinfo); return ret; + } cinfo->no_new_dev_lockres->flags |= DLM_LKF_NOQUEUE; ret = dlm_lock_sync(cinfo->no_new_dev_lockres, DLM_LOCK_EX); cinfo->no_new_dev_lockres->flags &= ~DLM_LKF_NOQUEUE; From f752413e26bdc9f73a8a12e280770646555c82fc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 21 Apr 2017 13:51:43 +0300 Subject: [PATCH 0081/1065] drm/mediatek: fix a timeout loop This code causes a static checker warning because it treats "i == 0" as a timeout but, because it's a post-op, the loop actually ends with "i" set to -1. Philipp Zabel points out that it would be cleaner to use readl_poll_timeout() instead. Fixes: 21898816831f ("drm/mediatek: add dsi transfer function") Signed-off-by: Dan Carpenter Signed-off-by: CK Hu Reviewed-by: Philipp Zabel --- drivers/gpu/drm/mediatek/mtk_dsi.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index 808b995a990f..b5cc6e12334c 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -900,16 +901,12 @@ static int mtk_dsi_host_detach(struct mipi_dsi_host *host, static void mtk_dsi_wait_for_idle(struct mtk_dsi *dsi) { - u32 timeout_ms = 500000; /* total 1s ~ 2s timeout */ + int ret; + u32 val; - while (timeout_ms--) { - if (!(readl(dsi->regs + DSI_INTSTA) & DSI_BUSY)) - break; - - usleep_range(2, 4); - } - - if (timeout_ms == 0) { + ret = readl_poll_timeout(dsi->regs + DSI_INTSTA, val, !(val & DSI_BUSY), + 4, 2000000); + if (ret) { DRM_WARN("polling dsi wait not busy timeout!\n"); mtk_dsi_enable(dsi); From 014580ffab654bb83256783a2b185cf6c06dffaa Mon Sep 17 00:00:00 2001 From: YYS Date: Tue, 21 Mar 2017 16:27:03 +0800 Subject: [PATCH 0082/1065] drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistake mtk_hdmi_setup_vendor_specific_infoframe will return before handle mtk_hdmi_hw_send_info_frame.Because hdmi_vendor_infoframe_pack returns the number of bytes packed into the binary buffer or a negative error code on failure. So correct it. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Nickey Yang Signed-off-by: CK Hu --- drivers/gpu/drm/mediatek/mtk_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c index 41a1c03b0347..0a4ffd724146 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c @@ -1062,7 +1062,7 @@ static int mtk_hdmi_setup_vendor_specific_infoframe(struct mtk_hdmi *hdmi, } err = hdmi_vendor_infoframe_pack(&frame, buffer, sizeof(buffer)); - if (err) { + if (err < 0) { dev_err(hdmi->dev, "Failed to pack vendor infoframe: %zd\n", err); return err; From 44d4182e23c555cbfa8b8a0ad2d94664d23850d3 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 1 May 2017 17:04:50 -0700 Subject: [PATCH 0083/1065] mtd: nand: don't leak buffers when ->scan_bbt() fails This bug seems to have been here forever, although we came close to fixing all of them in [1]! [1] 11eaf6df1cce ("mtd: nand: Remove BUG() abuse in nand_scan_tail") Signed-off-by: Brian Norris Acked-by: Ezequiel Garcia Signed-off-by: Boris Brezillon --- drivers/mtd/nand/nand_base.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d474378ed810..66782291a762 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -4842,7 +4842,11 @@ int nand_scan_tail(struct mtd_info *mtd) return 0; /* Build bad block table */ - return chip->scan_bbt(mtd); + ret = chip->scan_bbt(mtd); + if (ret) + goto err_free; + return 0; + err_free: if (nbuf) { kfree(nbuf->databuf); From 0545c1720277dd246bd682b23aee425f3830a14f Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 1 May 2017 17:04:52 -0700 Subject: [PATCH 0084/1065] mtd: nand: drop unneeded module.h include nand_ids isn't a separate module anymore and doesn't need this header. Signed-off-by: Brian Norris Signed-off-by: Boris Brezillon --- drivers/mtd/nand/nand_ids.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 9d5ca0e540b5..92e2cf8e9ff9 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -6,7 +6,6 @@ * published by the Free Software Foundation. * */ -#include #include #include From 787710492911e21148975e1d1914c7409fb32c7e Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 1 May 2017 17:04:53 -0700 Subject: [PATCH 0085/1065] mtd: nand: free vendor-specific resources in init failure paths If we fail any time after calling nand_detect(), then we don't call the vendor-specific ->cleanup() callback, and we'll leak any resources the vendor-specific code might have allocated. Mark the "fix" against the first commit that started allocating anything in ->init(). Fixes: 626994e07480 ("mtd: nand: hynix: Add read-retry support for 1x nm MLC NANDs") Signed-off-by: Brian Norris Signed-off-by: Boris Brezillon --- drivers/mtd/nand/nand_base.c | 38 +++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 66782291a762..81f77f9cd784 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -4361,7 +4361,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, /* Initialize the ->data_interface field. */ ret = nand_init_data_interface(chip); if (ret) - return ret; + goto err_nand_init; /* * Setup the data interface correctly on the chip and controller side. @@ -4373,7 +4373,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, */ ret = nand_setup_data_interface(chip); if (ret) - return ret; + goto err_nand_init; nand_maf_id = chip->id.data[0]; nand_dev_id = chip->id.data[1]; @@ -4404,6 +4404,12 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, mtd->size = i * chip->chipsize; return 0; + +err_nand_init: + /* Free manufacturer priv data. */ + nand_manufacturer_cleanup(chip); + + return ret; } EXPORT_SYMBOL(nand_scan_ident); @@ -4574,18 +4580,23 @@ int nand_scan_tail(struct mtd_info *mtd) /* New bad blocks should be marked in OOB, flash-based BBT, or both */ if (WARN_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && - !(chip->bbt_options & NAND_BBT_USE_FLASH))) - return -EINVAL; + !(chip->bbt_options & NAND_BBT_USE_FLASH))) { + ret = -EINVAL; + goto err_ident; + } if (invalid_ecc_page_accessors(chip)) { pr_err("Invalid ECC page accessors setup\n"); - return -EINVAL; + ret = -EINVAL; + goto err_ident; } if (!(chip->options & NAND_OWN_BUFFERS)) { nbuf = kzalloc(sizeof(*nbuf), GFP_KERNEL); - if (!nbuf) - return -ENOMEM; + if (!nbuf) { + ret = -ENOMEM; + goto err_ident; + } nbuf->ecccalc = kmalloc(mtd->oobsize, GFP_KERNEL); if (!nbuf->ecccalc) { @@ -4608,8 +4619,10 @@ int nand_scan_tail(struct mtd_info *mtd) chip->buffers = nbuf; } else { - if (!chip->buffers) - return -ENOMEM; + if (!chip->buffers) { + ret = -ENOMEM; + goto err_ident; + } } /* Set the internal oob buffer location, just after the page data */ @@ -4854,6 +4867,13 @@ err_free: kfree(nbuf->ecccalc); kfree(nbuf); } + +err_ident: + /* Clean up nand_scan_ident(). */ + + /* Free manufacturer priv data. */ + nand_manufacturer_cleanup(chip); + return ret; } EXPORT_SYMBOL(nand_scan_tail); From d24197907454b902908e025bce4b8bc677d3ba6b Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 1 May 2017 17:04:55 -0700 Subject: [PATCH 0086/1065] mtd: nand: samsung: warn about un-parseable ECC info We don't handle cases larger than 7. We probably shouldn't pretend we know the ECC step size in this case, and it's probably also good to WARN() like we do in many other similar cases. Fixes: 8fc82d456e40 ("mtd: nand: samsung: Retrieve ECC requirements from extended ID") Signed-off-by: Brian Norris Signed-off-by: Boris Brezillon --- drivers/mtd/nand/nand_samsung.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mtd/nand/nand_samsung.c b/drivers/mtd/nand/nand_samsung.c index 9cfc4035a420..1e0755997762 100644 --- a/drivers/mtd/nand/nand_samsung.c +++ b/drivers/mtd/nand/nand_samsung.c @@ -84,6 +84,9 @@ static void samsung_nand_decode_id(struct nand_chip *chip) case 7: chip->ecc_strength_ds = 60; break; + default: + WARN(1, "Could not decode ECC info"); + chip->ecc_step_ds = 0; } } } else { From 2761b4f12b017f6d3e5add386733a700a490df47 Mon Sep 17 00:00:00 2001 From: Andres Galacho Date: Mon, 1 May 2017 16:30:15 -0400 Subject: [PATCH 0087/1065] mtd: nand: tango: Export OF device ID table as module aliases The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries for example will be added to module.alias: alias: of:N*T*Csigma,smp8758-nandC* alias: of:N*T*Csigma,smp8758-nand Fixes: 6956e2385a16 ("mtd: nand: add tango NAND flash controller support") Cc: stable@vger.kernel.org Signed-off-by: Andres Galacho Acked-by: Brian Norris Signed-off-by: Boris Brezillon --- drivers/mtd/nand/tango_nand.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/tango_nand.c b/drivers/mtd/nand/tango_nand.c index 05b6e1065203..82fea9b4c358 100644 --- a/drivers/mtd/nand/tango_nand.c +++ b/drivers/mtd/nand/tango_nand.c @@ -663,6 +663,7 @@ static const struct of_device_id tango_nand_ids[] = { { .compatible = "sigma,smp8758-nand" }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, tango_nand_ids); static struct platform_driver tango_nand_driver = { .probe = tango_nand_probe, From 60cf0ce14b09b54e7ee79dc3ef498de6ef0e41e9 Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Fri, 12 May 2017 17:34:01 +0200 Subject: [PATCH 0088/1065] mtd: nand: tango: Update ecc_stats.corrected According to Boris, some user-space tools expect MTD drivers to update ecc_stats.corrected, and it's better to provide a lower bound than to provide no information at all. Fixes: 6956e2385a16 ("mtd: nand: add tango NAND flash controller support") Cc: stable@vger.kernel.org Reported-by: Pavel Machek Signed-off-by: Marc Gonzalez Signed-off-by: Boris Brezillon --- drivers/mtd/nand/tango_nand.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/nand/tango_nand.c b/drivers/mtd/nand/tango_nand.c index 82fea9b4c358..49b286c6c10f 100644 --- a/drivers/mtd/nand/tango_nand.c +++ b/drivers/mtd/nand/tango_nand.c @@ -55,10 +55,10 @@ * byte 1 for other packets in the page (PKT_N, for N > 0) * ERR_COUNT_PKT_N is the max error count over all but the first packet. */ -#define DECODE_OK_PKT_0(v) ((v) & BIT(7)) -#define DECODE_OK_PKT_N(v) ((v) & BIT(15)) #define ERR_COUNT_PKT_0(v) (((v) >> 0) & 0x3f) #define ERR_COUNT_PKT_N(v) (((v) >> 8) & 0x3f) +#define DECODE_FAIL_PKT_0(v) (((v) & BIT(7)) == 0) +#define DECODE_FAIL_PKT_N(v) (((v) & BIT(15)) == 0) /* Offsets relative to pbus_base */ #define PBUS_CS_CTRL 0x83c @@ -193,6 +193,8 @@ static int check_erased_page(struct nand_chip *chip, u8 *buf) chip->ecc.strength); if (res < 0) mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += res; bitflips = max(res, bitflips); buf += pkt_size; @@ -202,9 +204,11 @@ static int check_erased_page(struct nand_chip *chip, u8 *buf) return bitflips; } -static int decode_error_report(struct tango_nfc *nfc) +static int decode_error_report(struct nand_chip *chip) { u32 status, res; + struct mtd_info *mtd = nand_to_mtd(chip); + struct tango_nfc *nfc = to_tango_nfc(chip->controller); status = readl_relaxed(nfc->reg_base + NFC_XFER_STATUS); if (status & PAGE_IS_EMPTY) @@ -212,10 +216,14 @@ static int decode_error_report(struct tango_nfc *nfc) res = readl_relaxed(nfc->mem_base + ERROR_REPORT); - if (DECODE_OK_PKT_0(res) && DECODE_OK_PKT_N(res)) - return max(ERR_COUNT_PKT_0(res), ERR_COUNT_PKT_N(res)); + if (DECODE_FAIL_PKT_0(res) || DECODE_FAIL_PKT_N(res)) + return -EBADMSG; - return -EBADMSG; + /* ERR_COUNT_PKT_N is max, not sum, but that's all we have */ + mtd->ecc_stats.corrected += + ERR_COUNT_PKT_0(res) + ERR_COUNT_PKT_N(res); + + return max(ERR_COUNT_PKT_0(res), ERR_COUNT_PKT_N(res)); } static void tango_dma_callback(void *arg) @@ -282,7 +290,7 @@ static int tango_read_page(struct mtd_info *mtd, struct nand_chip *chip, if (err) return err; - res = decode_error_report(nfc); + res = decode_error_report(chip); if (res < 0) { chip->ecc.read_oob_raw(mtd, chip, page); res = check_erased_page(chip, buf); From d4ed3b9015b5eebc90d629579d9e7944607cbae5 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 4 May 2017 13:11:00 +0100 Subject: [PATCH 0089/1065] mtd: nand: make nand_ooblayout_lp_hamming_ops static nand_ooblayout_lp_hamming_ops can be made static as it does not need to be in global scope. Signed-off-by: Colin Ian King Acked-by: Boris Brezillon Signed-off-by: Boris Brezillon --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 81f77f9cd784..b1dd12729f19 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -202,7 +202,7 @@ static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section, return 0; } -const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = { +static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = { .ecc = nand_ooblayout_ecc_lp_hamming, .free = nand_ooblayout_free_lp_hamming, }; From df563c85de690ec0a1c7e49bd1d43ff743dfb1ce Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 2 May 2017 15:38:24 +0930 Subject: [PATCH 0090/1065] gpio: aspeed: Don't attempt to debounce if disabled We warn the user at driver probe time that debouncing is disabled. However, if they request debouncing later on we print a confusing error message: gpio_aspeed 1e780000.gpio: Failed to convert 5000us to cycles at 0Hz: -524 Instead bail out when the clock is not present. Fixes: 5ae4cb94b3133 (gpio: aspeed: Add debounce support) Signed-off-by: Joel Stanley Signed-off-by: Linus Walleij --- drivers/gpio/gpio-aspeed.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index ccea609676ee..4ca436e66bdb 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -646,6 +646,9 @@ static int enable_debounce(struct gpio_chip *chip, unsigned int offset, int rc; int i; + if (!gpio->clk) + return -EINVAL; + rc = usecs_to_cycles(gpio, usecs, &requested_cycles); if (rc < 0) { dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n", From a9de080bbcd5c4e213a3d7bbb1e314d60980e943 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 25 Apr 2017 06:22:05 +0000 Subject: [PATCH 0091/1065] pinctrl: cherryview: Add terminate entry for dmi_system_id tables Make sure dmi_system_id tables are NULL terminated. Fixes: 703650278372 ("pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again") Signed-off-by: Wei Yongjun Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 2debba62fac9..e35d0fe4c737 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1547,7 +1547,8 @@ static const struct dmi_system_id chv_no_valid_mask[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Edgar"), DMI_MATCH(DMI_BIOS_DATE, "05/21/2016"), }, - } + }, + {} }; static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq) From b4d2ea2af95cb77e2f320e24da526280d4aa2f6b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 8 May 2017 10:48:21 +0200 Subject: [PATCH 0092/1065] Revert "pinctrl: generic: Add bi-directional and output-enable" This reverts commit 8c58f1a7a4b6d1d723bf25fef9d842d5a11200d0. It turns out that applying these generic properties was premature: the properties used in the driver using this are of unclear electrical nature and the subject need to be discussed. Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 2 -- drivers/pinctrl/pinconf-generic.c | 3 --- include/linux/pinctrl/pinconf-generic.h | 3 --- 3 files changed, 8 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 71a3c134af1b..f01d154090da 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -247,7 +247,6 @@ bias-bus-hold - latch weakly bias-pull-up - pull up the pin bias-pull-down - pull down the pin bias-pull-pin-default - use pin-default pull state -bi-directional - pin supports simultaneous input/output operations drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source @@ -260,7 +259,6 @@ input-debounce - debounce mode with debound time X power-source - select between different power supplies low-power-enable - enable low power mode low-power-disable - disable low power mode -output-enable - enable output on pin regardless of output value output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level slew-rate - set the slew rate diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 0d6b7f4b82af..720a19fd38d2 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -35,7 +35,6 @@ static const struct pin_config_item conf_items[] = { PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, "input bias pull to pin specific state", NULL, false), PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false), - PCONFDUMP(PIN_CONFIG_BIDIRECTIONAL, "bi-directional pin operations", NULL, false), PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL, false), PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL, false), PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL, false), @@ -161,7 +160,6 @@ static const struct pinconf_generic_params dt_params[] = { { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 }, { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 }, - { "bi-directional", PIN_CONFIG_BIDIRECTIONAL, 1 }, { "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 }, { "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 }, { "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 }, @@ -174,7 +172,6 @@ static const struct pinconf_generic_params dt_params[] = { { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, { "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 }, { "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 }, - { "output-enable", PIN_CONFIG_OUTPUT, 1, }, { "output-high", PIN_CONFIG_OUTPUT, 1, }, { "output-low", PIN_CONFIG_OUTPUT, 0, }, { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 279e3c5326e3..7620eb127cff 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -42,8 +42,6 @@ * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high * impedance to VDD). If the argument is != 0 pull-up is enabled, * if it is 0, pull-up is total, i.e. the pin is connected to VDD. - * @PIN_CONFIG_BIDIRECTIONAL: the pin will be configured to allow simultaneous - * input and output operations. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports * which are then pulled up with an external resistor. Setting this @@ -98,7 +96,6 @@ enum pin_config_param { PIN_CONFIG_BIAS_PULL_DOWN, PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, PIN_CONFIG_BIAS_PULL_UP, - PIN_CONFIG_BIDIRECTIONAL, PIN_CONFIG_DRIVE_OPEN_DRAIN, PIN_CONFIG_DRIVE_OPEN_SOURCE, PIN_CONFIG_DRIVE_PUSH_PULL, From 020e0b1c8f19f1fc3bce23beeccd80c574ca0e49 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 11 May 2017 20:24:31 +0200 Subject: [PATCH 0093/1065] gpiolib: Add stubs for gpiod lookup table interface Add stubs for gpiod_add_lookup_table() and gpiod_remove_lookup_table() for the !GPIOLIB case to prevent build errors. Signed-off-by: Anatolij Gustschin Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- include/linux/gpio/machine.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/gpio/machine.h b/include/linux/gpio/machine.h index c0d712d22b07..f738d50cc17d 100644 --- a/include/linux/gpio/machine.h +++ b/include/linux/gpio/machine.h @@ -56,7 +56,14 @@ struct gpiod_lookup_table { .flags = _flags, \ } +#ifdef CONFIG_GPIOLIB void gpiod_add_lookup_table(struct gpiod_lookup_table *table); void gpiod_remove_lookup_table(struct gpiod_lookup_table *table); +#else +static inline +void gpiod_add_lookup_table(struct gpiod_lookup_table *table) {} +static inline +void gpiod_remove_lookup_table(struct gpiod_lookup_table *table) {} +#endif #endif /* __LINUX_GPIO_MACHINE_H */ From 76dd1fbebbaebab294dc09230960238746b883b1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 15 May 2017 09:31:41 +0200 Subject: [PATCH 0094/1065] HID: asus: Add support for T100 keyboard The keyboard dock used with the Asus Transformer T100 series, uses the same vendor-defined 0xff31 usage-page as some other Asus keyboards. But with a small twist, it has a small descriptor bug which needs to be fixed up for things to work. This commit adds the USB-ID for this keyboard to the hid-asus driver and makes asus_report_fixup fix the descriptor issue, fixing various special function keys on this keyboard not working. Signed-off-by: Hans de Goede Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-asus.c | 10 ++++++++++ drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + 3 files changed, 12 insertions(+) diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 16df6cc90235..101ab2e63d18 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -69,6 +69,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad"); #define QUIRK_IS_MULTITOUCH BIT(3) #define QUIRK_NO_CONSUMER_USAGES BIT(4) #define QUIRK_USE_KBD_BACKLIGHT BIT(5) +#define QUIRK_T100_KEYBOARD BIT(6) #define I2C_KEYBOARD_QUIRKS (QUIRK_FIX_NOTEBOOK_REPORT | \ QUIRK_NO_INIT_REPORTS | \ @@ -548,6 +549,12 @@ static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc, hid_info(hdev, "Fixing up Asus notebook report descriptor\n"); rdesc[55] = 0xdd; } + if (drvdata->quirks & QUIRK_T100_KEYBOARD && + *rsize == 76 && rdesc[73] == 0x81 && rdesc[74] == 0x01) { + hid_info(hdev, "Fixing up Asus T100 keyb report descriptor\n"); + rdesc[74] &= ~HID_MAIN_ITEM_CONSTANT; + } + return rdesc; } @@ -560,6 +567,9 @@ static const struct hid_device_id asus_devices[] = { USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2), QUIRK_USE_KBD_BACKLIGHT }, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, + USB_DEVICE_ID_ASUSTEK_T100_KEYBOARD), + QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES }, { } }; MODULE_DEVICE_TABLE(hid, asus_devices); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 38d041510e1d..04cee65531d7 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1855,6 +1855,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_T100_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, { HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185BFM, 0x2208) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 8e8a1baee090..8ca1e8ce0af2 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -173,6 +173,7 @@ #define USB_VENDOR_ID_ASUSTEK 0x0b05 #define USB_DEVICE_ID_ASUSTEK_LCM 0x1726 #define USB_DEVICE_ID_ASUSTEK_LCM2 0x175b +#define USB_DEVICE_ID_ASUSTEK_T100_KEYBOARD 0x17e0 #define USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD 0x8585 #define USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD 0x0101 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854 From 5bf185366bfca4ab7730c607f530188e1591a4c0 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 15 May 2017 17:28:34 +0200 Subject: [PATCH 0095/1065] s390/vfio_ccw: make some symbols static Make some symbols static to fix sparse warnings like: drivers/s390/cio/vfio_ccw_ops.c:73:1: warning: symbol 'mdev_type_attr_name' was not declared. Should it be static? Signed-off-by: Sebastian Ott Reviewed-by: Dong Jia Shi Signed-off-by: Cornelia Huck --- drivers/s390/cio/vfio_ccw_ops.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/s390/cio/vfio_ccw_ops.c b/drivers/s390/cio/vfio_ccw_ops.c index e72abbc18ee3..a66a317f3e4f 100644 --- a/drivers/s390/cio/vfio_ccw_ops.c +++ b/drivers/s390/cio/vfio_ccw_ops.c @@ -70,14 +70,14 @@ static ssize_t name_show(struct kobject *kobj, struct device *dev, char *buf) { return sprintf(buf, "I/O subchannel (Non-QDIO)\n"); } -MDEV_TYPE_ATTR_RO(name); +static MDEV_TYPE_ATTR_RO(name); static ssize_t device_api_show(struct kobject *kobj, struct device *dev, char *buf) { return sprintf(buf, "%s\n", VFIO_DEVICE_API_CCW_STRING); } -MDEV_TYPE_ATTR_RO(device_api); +static MDEV_TYPE_ATTR_RO(device_api); static ssize_t available_instances_show(struct kobject *kobj, struct device *dev, char *buf) @@ -86,7 +86,7 @@ static ssize_t available_instances_show(struct kobject *kobj, return sprintf(buf, "%d\n", atomic_read(&private->avail)); } -MDEV_TYPE_ATTR_RO(available_instances); +static MDEV_TYPE_ATTR_RO(available_instances); static struct attribute *mdev_types_attrs[] = { &mdev_type_attr_name.attr, @@ -100,7 +100,7 @@ static struct attribute_group mdev_type_group = { .attrs = mdev_types_attrs, }; -struct attribute_group *mdev_type_groups[] = { +static struct attribute_group *mdev_type_groups[] = { &mdev_type_group, NULL, }; @@ -152,7 +152,7 @@ static int vfio_ccw_mdev_open(struct mdev_device *mdev) &events, &private->nb); } -void vfio_ccw_mdev_release(struct mdev_device *mdev) +static void vfio_ccw_mdev_release(struct mdev_device *mdev) { struct vfio_ccw_private *private = dev_get_drvdata(mdev_parent_dev(mdev)); @@ -233,7 +233,7 @@ static int vfio_ccw_mdev_get_region_info(struct vfio_region_info *info, } } -int vfio_ccw_mdev_get_irq_info(struct vfio_irq_info *info) +static int vfio_ccw_mdev_get_irq_info(struct vfio_irq_info *info) { if (info->index != VFIO_CCW_IO_IRQ_INDEX) return -EINVAL; From 664b7c4728821767e0228ee161bab87db2be58f1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 12 May 2017 08:47:57 -0700 Subject: [PATCH 0096/1065] pinctrl: core: Fix warning by removing bogus code Andre Przywara noticed that we can get the following warning with -EPROBE_DEFER: "WARNING: CPU: 1 PID: 89 at drivers/base/dd.c:349 driver_probe_device+0x2ac/0x2e8" Let's fix the issue by removing the indices as suggested by Tejun Heo . All we have to do here is kill the radix tree. I probably ended up with the indices after grepping for removal of all entries using radix_tree_for_each_slot() and the first match found was gmap_radix_tree_free(). Anyways, no need for indices here, and we can just do remove all the entries using radix_tree_for_each_slot() along how the item_kill_tree() test case does. Fixes: c7059c5ac70a ("pinctrl: core: Add generic pinctrl functions for managing groups") Fixes: a76edc89b100 ("pinctrl: core: Add generic pinctrl functions for managing groups") Reported-by: Andre Przywara Signed-off-by: Tony Lindgren Reviewed-by: Andre Przywara Tested-by: Andre Przywara Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 20 +++----------------- drivers/pinctrl/pinmux.c | 21 ++++----------------- 2 files changed, 7 insertions(+), 34 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 1653cbda6a82..bd459a93b0e7 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -680,30 +680,16 @@ EXPORT_SYMBOL_GPL(pinctrl_generic_remove_group); * pinctrl_generic_free_groups() - removes all pin groups * @pctldev: pin controller device * - * Note that the caller must take care of locking. + * Note that the caller must take care of locking. The pinctrl groups + * are allocated with devm_kzalloc() so no need to free them here. */ static void pinctrl_generic_free_groups(struct pinctrl_dev *pctldev) { struct radix_tree_iter iter; - struct group_desc *group; - unsigned long *indices; void **slot; - int i = 0; - - indices = devm_kzalloc(pctldev->dev, sizeof(*indices) * - pctldev->num_groups, GFP_KERNEL); - if (!indices) - return; radix_tree_for_each_slot(slot, &pctldev->pin_group_tree, &iter, 0) - indices[i++] = iter.index; - - for (i = 0; i < pctldev->num_groups; i++) { - group = radix_tree_lookup(&pctldev->pin_group_tree, - indices[i]); - radix_tree_delete(&pctldev->pin_group_tree, indices[i]); - devm_kfree(pctldev->dev, group); - } + radix_tree_delete(&pctldev->pin_group_tree, iter.index); pctldev->num_groups = 0; } diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 9fd6d9087dc5..16b3ae5e4f44 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -826,30 +826,17 @@ EXPORT_SYMBOL_GPL(pinmux_generic_remove_function); * pinmux_generic_free_functions() - removes all functions * @pctldev: pin controller device * - * Note that the caller must take care of locking. + * Note that the caller must take care of locking. The pinctrl + * functions are allocated with devm_kzalloc() so no need to free + * them here. */ void pinmux_generic_free_functions(struct pinctrl_dev *pctldev) { struct radix_tree_iter iter; - struct function_desc *function; - unsigned long *indices; void **slot; - int i = 0; - - indices = devm_kzalloc(pctldev->dev, sizeof(*indices) * - pctldev->num_functions, GFP_KERNEL); - if (!indices) - return; radix_tree_for_each_slot(slot, &pctldev->pin_function_tree, &iter, 0) - indices[i++] = iter.index; - - for (i = 0; i < pctldev->num_functions; i++) { - function = radix_tree_lookup(&pctldev->pin_function_tree, - indices[i]); - radix_tree_delete(&pctldev->pin_function_tree, indices[i]); - devm_kfree(pctldev->dev, function); - } + radix_tree_delete(&pctldev->pin_function_tree, iter.index); pctldev->num_functions = 0; } From f52236e0b0a0820e938e16a776309e76b7bd6c43 Mon Sep 17 00:00:00 2001 From: Gilad Ben-Yossef Date: Thu, 18 May 2017 13:47:25 +0300 Subject: [PATCH 0097/1065] dm verity: fix no salt use case DM-Verity has an (undocumented) mode where no salt is used. This was never handled directly by the DM-Verity code, instead working due to the fact that calling crypto_shash_update() with a zero length data is an implicit noop. This is no longer the case now that we have switched to crypto_ahash_update(). Fix the issue by introducing explicit handling of the no salt use case to DM-Verity. Signed-off-by: Gilad Ben-Yossef Reported-by: Marian Csontos Fixes: d1ac3ff ("dm verity: switch to using asynchronous hash crypto API") Tested-by: Milan Broz Signed-off-by: Mike Snitzer --- drivers/md/dm-verity-target.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index 97de961a3bfc..1ec9b2c51c07 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -166,7 +166,7 @@ static int verity_hash_init(struct dm_verity *v, struct ahash_request *req, return r; } - if (likely(v->version >= 1)) + if (likely(v->salt_size && (v->version >= 1))) r = verity_hash_update(v, req, v->salt, v->salt_size, res); return r; @@ -177,7 +177,7 @@ static int verity_hash_final(struct dm_verity *v, struct ahash_request *req, { int r; - if (unlikely(!v->version)) { + if (unlikely(v->salt_size && (!v->version))) { r = verity_hash_update(v, req, v->salt, v->salt_size, res); if (r < 0) { From 702a6204f804bad946c455e7cd8d50d79c9d1629 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sat, 20 May 2017 14:56:21 -0400 Subject: [PATCH 0098/1065] dm integrity: use kvmalloc() instead of dm_integrity_kvmalloc() Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-integrity.c | 27 ++++++--------------------- 1 file changed, 6 insertions(+), 21 deletions(-) diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index c7f7c8d76576..1feeb2ccf5a1 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -2374,21 +2374,6 @@ static void dm_integrity_set(struct dm_target *ti, struct dm_integrity_c *ic) blk_queue_max_integrity_segments(disk->queue, UINT_MAX); } -/* FIXME: use new kvmalloc */ -static void *dm_integrity_kvmalloc(size_t size, gfp_t gfp) -{ - void *ptr = NULL; - - if (size <= PAGE_SIZE) - ptr = kmalloc(size, GFP_KERNEL | gfp); - if (!ptr && size <= KMALLOC_MAX_SIZE) - ptr = kmalloc(size, GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY | gfp); - if (!ptr) - ptr = __vmalloc(size, GFP_KERNEL | gfp, PAGE_KERNEL); - - return ptr; -} - static void dm_integrity_free_page_list(struct dm_integrity_c *ic, struct page_list *pl) { unsigned i; @@ -2407,7 +2392,7 @@ static struct page_list *dm_integrity_alloc_page_list(struct dm_integrity_c *ic) struct page_list *pl; unsigned i; - pl = dm_integrity_kvmalloc(page_list_desc_size, __GFP_ZERO); + pl = kvmalloc(page_list_desc_size, GFP_KERNEL | __GFP_ZERO); if (!pl) return NULL; @@ -2437,7 +2422,7 @@ static struct scatterlist **dm_integrity_alloc_journal_scatterlist(struct dm_int struct scatterlist **sl; unsigned i; - sl = dm_integrity_kvmalloc(ic->journal_sections * sizeof(struct scatterlist *), __GFP_ZERO); + sl = kvmalloc(ic->journal_sections * sizeof(struct scatterlist *), GFP_KERNEL | __GFP_ZERO); if (!sl) return NULL; @@ -2453,7 +2438,7 @@ static struct scatterlist **dm_integrity_alloc_journal_scatterlist(struct dm_int n_pages = (end_index - start_index + 1); - s = dm_integrity_kvmalloc(n_pages * sizeof(struct scatterlist), 0); + s = kvmalloc(n_pages * sizeof(struct scatterlist), GFP_KERNEL); if (!s) { dm_integrity_free_journal_scatterlist(ic, sl); return NULL; @@ -2617,7 +2602,7 @@ static int create_journal(struct dm_integrity_c *ic, char **error) goto bad; } - sg = dm_integrity_kvmalloc((ic->journal_pages + 1) * sizeof(struct scatterlist), 0); + sg = kvmalloc((ic->journal_pages + 1) * sizeof(struct scatterlist), GFP_KERNEL); if (!sg) { *error = "Unable to allocate sg list"; r = -ENOMEM; @@ -2673,7 +2658,7 @@ static int create_journal(struct dm_integrity_c *ic, char **error) r = -ENOMEM; goto bad; } - ic->sk_requests = dm_integrity_kvmalloc(ic->journal_sections * sizeof(struct skcipher_request *), __GFP_ZERO); + ic->sk_requests = kvmalloc(ic->journal_sections * sizeof(struct skcipher_request *), GFP_KERNEL | __GFP_ZERO); if (!ic->sk_requests) { *error = "Unable to allocate sk requests"; r = -ENOMEM; @@ -2740,7 +2725,7 @@ retest_commit_id: r = -ENOMEM; goto bad; } - ic->journal_tree = dm_integrity_kvmalloc(journal_tree_size, 0); + ic->journal_tree = kvmalloc(journal_tree_size, GFP_KERNEL); if (!ic->journal_tree) { *error = "Could not allocate memory for journal tree"; r = -ENOMEM; From 8c1e2162f27b319da913683143c0c6c09b083ebb Mon Sep 17 00:00:00 2001 From: Junaid Shahid Date: Thu, 18 May 2017 12:00:51 -0700 Subject: [PATCH 0099/1065] dm ioctl: restore __GFP_HIGH in copy_params() Commit d224e9381897 ("drivers/md/dm-ioctl.c: use kvmalloc rather than opencoded variant") left out the __GFP_HIGH flag when converting from __vmalloc to kvmalloc. This can cause the DM ioctl to fail in some low memory situations where it wouldn't have failed earlier. Add __GFP_HIGH back to avoid any potential regression. Fixes: d224e9381897 ("drivers/md/dm-ioctl.c: use kvmalloc rather than opencoded variant") Signed-off-by: Junaid Shahid Signed-off-by: Mikulas Patocka Acked-by: David Rientjes Signed-off-by: Mike Snitzer --- drivers/md/dm-ioctl.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 0555b4410e05..41852ae287a5 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1710,12 +1710,13 @@ static int copy_params(struct dm_ioctl __user *user, struct dm_ioctl *param_kern } /* - * Try to avoid low memory issues when a device is suspended. + * Use __GFP_HIGH to avoid low memory issues when a device is + * suspended and the ioctl is needed to resume it. * Use kmalloc() rather than vmalloc() when we can. */ dmi = NULL; noio_flag = memalloc_noio_save(); - dmi = kvmalloc(param_kernel->data_size, GFP_KERNEL); + dmi = kvmalloc(param_kernel->data_size, GFP_KERNEL | __GFP_HIGH); memalloc_noio_restore(noio_flag); if (!dmi) { From 0340ff83cd4475261e7474033a381bc125b45244 Mon Sep 17 00:00:00 2001 From: Michael Thalmeier Date: Thu, 18 May 2017 16:14:14 +0200 Subject: [PATCH 0100/1065] usb: chipidea: debug: check before accessing ci_role ci_role BUGs when the role is >= CI_ROLE_END. Cc: stable@vger.kernel.org #v3.10+ Signed-off-by: Michael Thalmeier Signed-off-by: Peter Chen --- drivers/usb/chipidea/debug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index 6d23eede4d8c..1c31e8a08810 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -294,7 +294,8 @@ static int ci_role_show(struct seq_file *s, void *data) { struct ci_hdrc *ci = s->private; - seq_printf(s, "%s\n", ci_role(ci)->name); + if (ci->role != CI_ROLE_END) + seq_printf(s, "%s\n", ci_role(ci)->name); return 0; } From cbb22ebcfb9920380ed69854a7095d497798063d Mon Sep 17 00:00:00 2001 From: Michael Thalmeier Date: Fri, 19 May 2017 10:32:09 +0200 Subject: [PATCH 0101/1065] usb: chipidea: core: check before accessing ci_role in ci_role_show ci_role BUGs when the role is >= CI_ROLE_END. This is the case while the role is changing. Signed-off-by: Michael Thalmeier Signed-off-by: Peter Chen --- drivers/usb/chipidea/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 9e217b1361ea..fe4fe2440729 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -843,7 +843,10 @@ static ssize_t ci_role_show(struct device *dev, struct device_attribute *attr, { struct ci_hdrc *ci = dev_get_drvdata(dev); - return sprintf(buf, "%s\n", ci_role(ci)->name); + if (ci->role != CI_ROLE_END) + return sprintf(buf, "%s\n", ci_role(ci)->name); + + return 0; } static ssize_t ci_role_store(struct device *dev, From e68368aed56324e2e38d4f6b044bb8cf82077fc2 Mon Sep 17 00:00:00 2001 From: Gilad Ben-Yossef Date: Thu, 18 May 2017 16:29:23 +0300 Subject: [PATCH 0102/1065] crypto: asymmetric_keys - handle EBUSY due to backlog correctly public_key_verify_signature() was passing the CRYPTO_TFM_REQ_MAY_BACKLOG flag to akcipher_request_set_callback() but was not handling correctly the case where a -EBUSY error could be returned from the call to crypto_akcipher_verify() if backlog was used, possibly casuing data corruption due to use-after-free of buffers. Resolve this by handling -EBUSY correctly. Signed-off-by: Gilad Ben-Yossef CC: stable@vger.kernel.org Signed-off-by: Herbert Xu --- crypto/asymmetric_keys/public_key.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/crypto/asymmetric_keys/public_key.c b/crypto/asymmetric_keys/public_key.c index d3a989e718f5..3cd6e12cfc46 100644 --- a/crypto/asymmetric_keys/public_key.c +++ b/crypto/asymmetric_keys/public_key.c @@ -141,7 +141,7 @@ int public_key_verify_signature(const struct public_key *pkey, * signature and returns that to us. */ ret = crypto_akcipher_verify(req); - if (ret == -EINPROGRESS) { + if ((ret == -EINPROGRESS) || (ret == -EBUSY)) { wait_for_completion(&compl.completion); ret = compl.err; } From a5dfefb1c3f3db81662556393fd9283511e08430 Mon Sep 17 00:00:00 2001 From: Gilad Ben-Yossef Date: Thu, 18 May 2017 16:29:24 +0300 Subject: [PATCH 0103/1065] crypto: drbg - wait for crypto op not signal safe drbg_kcapi_sym_ctr() was using wait_for_completion_interruptible() to wait for completion of async crypto op but if a signal occurs it may return before DMA ops of HW crypto provider finish, thus corrupting the output buffer. Resolve this by using wait_for_completion() instead. Reported-by: Eric Biggers Signed-off-by: Gilad Ben-Yossef CC: stable@vger.kernel.org Signed-off-by: Herbert Xu --- crypto/drbg.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/crypto/drbg.c b/crypto/drbg.c index fa749f470135..cdb27ac4b226 100644 --- a/crypto/drbg.c +++ b/crypto/drbg.c @@ -1767,9 +1767,8 @@ static int drbg_kcapi_sym_ctr(struct drbg_state *drbg, break; case -EINPROGRESS: case -EBUSY: - ret = wait_for_completion_interruptible( - &drbg->ctr_completion); - if (!ret && !drbg->ctr_async_err) { + wait_for_completion(&drbg->ctr_completion); + if (!drbg->ctr_async_err) { reinit_completion(&drbg->ctr_completion); break; } From f3ad587070d6bd961ab942b3fd7a85d00dfc934b Mon Sep 17 00:00:00 2001 From: Gilad Ben-Yossef Date: Thu, 18 May 2017 16:29:25 +0300 Subject: [PATCH 0104/1065] crypto: gcm - wait for crypto op not signal safe crypto_gcm_setkey() was using wait_for_completion_interruptible() to wait for completion of async crypto op but if a signal occurs it may return before DMA ops of HW crypto provider finish, thus corrupting the data buffer that is kfree'ed in this case. Resolve this by using wait_for_completion() instead. Reported-by: Eric Biggers Signed-off-by: Gilad Ben-Yossef CC: stable@vger.kernel.org Signed-off-by: Herbert Xu --- crypto/gcm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index b7ad808be3d4..3841b5eafa7e 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -152,10 +152,8 @@ static int crypto_gcm_setkey(struct crypto_aead *aead, const u8 *key, err = crypto_skcipher_encrypt(&data->req); if (err == -EINPROGRESS || err == -EBUSY) { - err = wait_for_completion_interruptible( - &data->result.completion); - if (!err) - err = data->result.err; + wait_for_completion(&data->result.completion); + err = data->result.err; } if (err) From 1999f108c983a7287a847b09e29dac25b9301dee Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Wed, 17 May 2017 15:49:01 +0800 Subject: [PATCH 0105/1065] drm/i915/gvt: Disable compression workaround for Gen9 With enabling this workaround, can observe GPU hang issue on Gen9. As currently host side doesn't have this workaround, disable it from GVT side. v2: - Fix indent error.(Zhenyu) Cc: Zhenyu Wang Signed-off-by: Chuanxiao Dong Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 30 ++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index c995e540ff96..0ffd69654592 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -1366,18 +1366,28 @@ static int skl_misc_ctl_write(struct intel_vgpu *vgpu, unsigned int offset, void *p_data, unsigned int bytes) { struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv; - i915_reg_t reg = {.reg = offset}; + u32 v = *(u32 *)p_data; + + if (!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv)) + return intel_vgpu_default_mmio_write(vgpu, + offset, p_data, bytes); switch (offset) { case 0x4ddc: - vgpu_vreg(vgpu, offset) = 0x8000003c; - /* WaCompressedResourceSamplerPbeMediaNewHashMode:skl */ - I915_WRITE(reg, vgpu_vreg(vgpu, offset)); + /* bypass WaCompressedResourceSamplerPbeMediaNewHashMode */ + vgpu_vreg(vgpu, offset) = v & ~(1 << 31); break; case 0x42080: - vgpu_vreg(vgpu, offset) = 0x8000; - /* WaCompressedResourceDisplayNewHashMode:skl */ - I915_WRITE(reg, vgpu_vreg(vgpu, offset)); + /* bypass WaCompressedResourceDisplayNewHashMode */ + vgpu_vreg(vgpu, offset) = v & ~(1 << 15); + break; + case 0xe194: + /* bypass WaCompressedResourceSamplerPbeMediaNewHashMode */ + vgpu_vreg(vgpu, offset) = v & ~(1 << 8); + break; + case 0x7014: + /* bypass WaCompressedResourceSamplerPbeMediaNewHashMode */ + vgpu_vreg(vgpu, offset) = v & ~(1 << 13); break; default: return -EINVAL; @@ -1634,7 +1644,8 @@ static int init_generic_mmio_info(struct intel_gvt *gvt) MMIO_DFH(GAM_ECOCHK, D_ALL, F_CMD_ACCESS, NULL, NULL); MMIO_DFH(GEN7_COMMON_SLICE_CHICKEN1, D_ALL, F_MODE_MASK | F_CMD_ACCESS, NULL, NULL); - MMIO_DFH(COMMON_SLICE_CHICKEN2, D_ALL, F_MODE_MASK | F_CMD_ACCESS, NULL, NULL); + MMIO_DFH(COMMON_SLICE_CHICKEN2, D_ALL, F_MODE_MASK | F_CMD_ACCESS, NULL, + skl_misc_ctl_write); MMIO_DFH(0x9030, D_ALL, F_CMD_ACCESS, NULL, NULL); MMIO_DFH(0x20a0, D_ALL, F_CMD_ACCESS, NULL, NULL); MMIO_DFH(0x2420, D_ALL, F_CMD_ACCESS, NULL, NULL); @@ -2568,7 +2579,8 @@ static int init_broadwell_mmio_info(struct intel_gvt *gvt) MMIO_D(0x6e570, D_BDW_PLUS); MMIO_D(0x65f10, D_BDW_PLUS); - MMIO_DFH(0xe194, D_BDW_PLUS, F_MODE_MASK | F_CMD_ACCESS, NULL, NULL); + MMIO_DFH(0xe194, D_BDW_PLUS, F_MODE_MASK | F_CMD_ACCESS, NULL, + skl_misc_ctl_write); MMIO_DFH(0xe188, D_BDW_PLUS, F_MODE_MASK | F_CMD_ACCESS, NULL, NULL); MMIO_DFH(HALF_SLICE_CHICKEN2, D_BDW_PLUS, F_MODE_MASK | F_CMD_ACCESS, NULL, NULL); MMIO_DFH(0x2580, D_BDW_PLUS, F_MODE_MASK | F_CMD_ACCESS, NULL, NULL); From 9a752b4c9ab924033bfdb8784c680d50b2bd5684 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 13 May 2017 14:39:53 +0200 Subject: [PATCH 0106/1065] gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs The Crystal Cove PMIC has 16 real GPIOs but the ACPI code for devices with this PMIC may address up to 95 GPIOs, these extra GPIOs are called virtual GPIOs and are used by the ACPI code as a method of accessing various non GPIO bits of PMIC. Commit dcdc3018d635 ("gpio: crystalcove: support virtual GPIO") added dummy support for these to avoid a bunch of ACPI errors, but instead of ignoring writes / reads to them by doing: if (gpio >= CRYSTALCOVE_GPIO_NUM) return 0; It accidentally introduced the following wrong check: if (gpio > CRYSTALCOVE_VGPIO_NUM) return 0; Which means that attempts by the ACPI code to access these gpios causes some arbitrary gpio to get touched through for example GPIO1P0CTLO + gpionr % 8. Since we do support input/output (but not interrupts) on the 0x5e virtual GPIO, this commit makes to_reg return -ENOTSUPP for unsupported virtual GPIOs so as to not have to check for (gpio >= CRYSTALCOVE_GPIO_NUM && gpio != 0x5e) everywhere and to make it easier to add support for more virtual GPIOs in the future. It then adds a check for to_reg returning an error to all callers where this may happen fixing the ACPI code accessing virtual GPIOs accidentally causing changes to real GPIOs. Fixes: dcdc3018d635 ("gpio: crystalcove: support virtual GPIO") Cc: Aaron Lu Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/gpio/gpio-crystalcove.c | 54 ++++++++++++++++++++++----------- 1 file changed, 36 insertions(+), 18 deletions(-) diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c index 2197368cc899..e60156ec0c18 100644 --- a/drivers/gpio/gpio-crystalcove.c +++ b/drivers/gpio/gpio-crystalcove.c @@ -90,8 +90,18 @@ static inline int to_reg(int gpio, enum ctrl_register reg_type) { int reg; - if (gpio == 94) - return GPIOPANELCTL; + if (gpio >= CRYSTALCOVE_GPIO_NUM) { + /* + * Virtual GPIO called from ACPI, for now we only support + * the panel ctl. + */ + switch (gpio) { + case 0x5e: + return GPIOPANELCTL; + default: + return -EOPNOTSUPP; + } + } if (reg_type == CTRL_IN) { if (gpio < 8) @@ -130,36 +140,36 @@ static void crystalcove_update_irq_ctrl(struct crystalcove_gpio *cg, int gpio) static int crystalcove_gpio_dir_in(struct gpio_chip *chip, unsigned gpio) { struct crystalcove_gpio *cg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); - if (gpio > CRYSTALCOVE_VGPIO_NUM) + if (reg < 0) return 0; - return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT), - CTLO_INPUT_SET); + return regmap_write(cg->regmap, reg, CTLO_INPUT_SET); } static int crystalcove_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int value) { struct crystalcove_gpio *cg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); - if (gpio > CRYSTALCOVE_VGPIO_NUM) + if (reg < 0) return 0; - return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT), - CTLO_OUTPUT_SET | value); + return regmap_write(cg->regmap, reg, CTLO_OUTPUT_SET | value); } static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned gpio) { struct crystalcove_gpio *cg = gpiochip_get_data(chip); - int ret; unsigned int val; + int ret, reg = to_reg(gpio, CTRL_IN); - if (gpio > CRYSTALCOVE_VGPIO_NUM) + if (reg < 0) return 0; - ret = regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &val); + ret = regmap_read(cg->regmap, reg, &val); if (ret) return ret; @@ -170,14 +180,15 @@ static void crystalcove_gpio_set(struct gpio_chip *chip, unsigned gpio, int value) { struct crystalcove_gpio *cg = gpiochip_get_data(chip); + int reg = to_reg(gpio, CTRL_OUT); - if (gpio > CRYSTALCOVE_VGPIO_NUM) + if (reg < 0) return; if (value) - regmap_update_bits(cg->regmap, to_reg(gpio, CTRL_OUT), 1, 1); + regmap_update_bits(cg->regmap, reg, 1, 1); else - regmap_update_bits(cg->regmap, to_reg(gpio, CTRL_OUT), 1, 0); + regmap_update_bits(cg->regmap, reg, 1, 0); } static int crystalcove_irq_type(struct irq_data *data, unsigned type) @@ -185,6 +196,9 @@ static int crystalcove_irq_type(struct irq_data *data, unsigned type) struct crystalcove_gpio *cg = gpiochip_get_data(irq_data_get_irq_chip_data(data)); + if (data->hwirq >= CRYSTALCOVE_GPIO_NUM) + return 0; + switch (type) { case IRQ_TYPE_NONE: cg->intcnt_value = CTLI_INTCNT_DIS; @@ -235,8 +249,10 @@ static void crystalcove_irq_unmask(struct irq_data *data) struct crystalcove_gpio *cg = gpiochip_get_data(irq_data_get_irq_chip_data(data)); - cg->set_irq_mask = false; - cg->update |= UPDATE_IRQ_MASK; + if (data->hwirq < CRYSTALCOVE_GPIO_NUM) { + cg->set_irq_mask = false; + cg->update |= UPDATE_IRQ_MASK; + } } static void crystalcove_irq_mask(struct irq_data *data) @@ -244,8 +260,10 @@ static void crystalcove_irq_mask(struct irq_data *data) struct crystalcove_gpio *cg = gpiochip_get_data(irq_data_get_irq_chip_data(data)); - cg->set_irq_mask = true; - cg->update |= UPDATE_IRQ_MASK; + if (data->hwirq < CRYSTALCOVE_GPIO_NUM) { + cg->set_irq_mask = true; + cg->update |= UPDATE_IRQ_MASK; + } } static struct irq_chip crystalcove_irqchip = { From c61872c9833d17d3807fb999096917c1f9eaada0 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 17 May 2017 13:25:12 +0300 Subject: [PATCH 0107/1065] firmware: dmi: Add DMI_PRODUCT_FAMILY identification string Sometimes it is more convenient to be able to match a whole family of products, like in case of bunch of Chromebooks based on Intel_Strago to apply a driver quirk instead of quirking each machine one-by-one. This adds support for DMI_PRODUCT_FAMILY identification string and also exports it to the userspace through sysfs attribute just like the existing ones. Suggested-by: Dmitry Torokhov Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/firmware/dmi-id.c | 2 ++ drivers/firmware/dmi_scan.c | 1 + include/linux/mod_devicetable.h | 1 + 3 files changed, 4 insertions(+) diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c index 44c01390d035..dc269cb288c2 100644 --- a/drivers/firmware/dmi-id.c +++ b/drivers/firmware/dmi-id.c @@ -47,6 +47,7 @@ DEFINE_DMI_ATTR_WITH_SHOW(product_name, 0444, DMI_PRODUCT_NAME); DEFINE_DMI_ATTR_WITH_SHOW(product_version, 0444, DMI_PRODUCT_VERSION); DEFINE_DMI_ATTR_WITH_SHOW(product_serial, 0400, DMI_PRODUCT_SERIAL); DEFINE_DMI_ATTR_WITH_SHOW(product_uuid, 0400, DMI_PRODUCT_UUID); +DEFINE_DMI_ATTR_WITH_SHOW(product_family, 0400, DMI_PRODUCT_FAMILY); DEFINE_DMI_ATTR_WITH_SHOW(board_vendor, 0444, DMI_BOARD_VENDOR); DEFINE_DMI_ATTR_WITH_SHOW(board_name, 0444, DMI_BOARD_NAME); DEFINE_DMI_ATTR_WITH_SHOW(board_version, 0444, DMI_BOARD_VERSION); @@ -191,6 +192,7 @@ static void __init dmi_id_init_attr_table(void) ADD_DMI_ATTR(product_version, DMI_PRODUCT_VERSION); ADD_DMI_ATTR(product_serial, DMI_PRODUCT_SERIAL); ADD_DMI_ATTR(product_uuid, DMI_PRODUCT_UUID); + ADD_DMI_ATTR(product_family, DMI_PRODUCT_FAMILY); ADD_DMI_ATTR(board_vendor, DMI_BOARD_VENDOR); ADD_DMI_ATTR(board_name, DMI_BOARD_NAME); ADD_DMI_ATTR(board_version, DMI_BOARD_VERSION); diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 54be60ead08f..93f7acdaac7a 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -430,6 +430,7 @@ static void __init dmi_decode(const struct dmi_header *dm, void *dummy) dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7); dmi_save_uuid(dm, DMI_PRODUCT_UUID, 8); + dmi_save_ident(dm, DMI_PRODUCT_FAMILY, 26); break; case 2: /* Base Board Information */ dmi_save_ident(dm, DMI_BOARD_VENDOR, 4); diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 566fda587fcf..3f74ef2281e8 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -467,6 +467,7 @@ enum dmi_field { DMI_PRODUCT_VERSION, DMI_PRODUCT_SERIAL, DMI_PRODUCT_UUID, + DMI_PRODUCT_FAMILY, DMI_BOARD_VENDOR, DMI_BOARD_NAME, DMI_BOARD_VERSION, From 2a8209fa68236ad65363dba03db5dbced520268a Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 17 May 2017 13:25:14 +0300 Subject: [PATCH 0108/1065] pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems It turns out there are quite many Chromebooks out there that have the same keyboard issue than Acer Chromebook. All of them are based on Intel_Strago reference and report their DMI_PRODUCT_FAMILY as "Intel_Strago" (Samsung Chromebook 3 and Cyan Chromebooks are exceptions for which we add separate entries). Instead of adding each machine to the quirk table, we use DMI_PRODUCT_FAMILY of "Intel_Strago" that hopefully covers most of the machines out there currently. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945 Suggested: Dmitry Torokhov Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index e35d0fe4c737..20f1b4493994 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1539,13 +1539,26 @@ static void chv_gpio_irq_handler(struct irq_desc *desc) * is not listed below. */ static const struct dmi_system_id chv_no_valid_mask[] = { + /* See https://bugzilla.kernel.org/show_bug.cgi?id=194945 */ { - /* See https://bugzilla.kernel.org/show_bug.cgi?id=194945 */ - .ident = "Acer Chromebook (CYAN)", + .ident = "Intel_Strago based Chromebooks (All models)", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), - DMI_MATCH(DMI_PRODUCT_NAME, "Edgar"), - DMI_MATCH(DMI_BIOS_DATE, "05/21/2016"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "Intel_Strago"), + }, + }, + { + .ident = "Acer Chromebook R11 (Cyan)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Cyan"), + }, + }, + { + .ident = "Samsung Chromebook 3 (Celes)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Celes"), }, }, {} From 0377f49fb4f83edf40a6ff355eb8df6697491ea1 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Fri, 12 May 2017 10:01:18 -0700 Subject: [PATCH 0109/1065] MAINTAINERS: remove self from GPIO maintainers I have not been able to dedicate time to the GPIO subsystem since quite some time, and I don't see the situation improving in the near future. Update the maintainers list to reflect this unfortunate fact. Signed-off-by: Alexandre Courbot Signed-off-by: Linus Walleij --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9e984645c4b0..e45b74a576a8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5667,7 +5667,6 @@ F: tools/testing/selftests/gpio/ GPIO SUBSYSTEM M: Linus Walleij -M: Alexandre Courbot L: linux-gpio@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git S: Maintained From da6c2addf66d7ff7d0b090d6267d4292f951e4e6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 18 May 2017 11:23:55 +0200 Subject: [PATCH 0110/1065] pinctrl: mxs: atomically switch mux and drive strength config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To set the mux mode of a pin two bits must be set. Up to now this is implemented using the following idiom: writel(mask, reg + CLR); writel(value, reg + SET); . This however results in the mux mode being 0 between the two writes. On my machine there is an IC's reset pin connected to LCD_D20. The bootloader configures this pin as GPIO output-high (i.e. not holding the IC in reset). When Linux reconfigures the pin to GPIO the short time LCD_D20 is muxed as LCD_D20 instead of GPIO_1_20 is enough to confuse the connected IC. The same problem is present for the pin's drive strength setting which is reset to low drive strength before using the right value. So instead of relying on the hardware to modify the register setting using two writes implement the bit toggling using read-modify-write. Fixes: 17723111e64f ("pinctrl: add pinctrl-mxs support") Signed-off-by: Uwe Kleine-König Acked-by: Shawn Guo Signed-off-by: Linus Walleij --- drivers/pinctrl/freescale/pinctrl-mxs.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/freescale/pinctrl-mxs.c b/drivers/pinctrl/freescale/pinctrl-mxs.c index 41b5b07d5a2b..6852010a6d70 100644 --- a/drivers/pinctrl/freescale/pinctrl-mxs.c +++ b/drivers/pinctrl/freescale/pinctrl-mxs.c @@ -194,6 +194,16 @@ static int mxs_pinctrl_get_func_groups(struct pinctrl_dev *pctldev, return 0; } +static void mxs_pinctrl_rmwl(u32 value, u32 mask, u8 shift, void __iomem *reg) +{ + u32 tmp; + + tmp = readl(reg); + tmp &= ~(mask << shift); + tmp |= value << shift; + writel(tmp, reg); +} + static int mxs_pinctrl_set_mux(struct pinctrl_dev *pctldev, unsigned selector, unsigned group) { @@ -211,8 +221,7 @@ static int mxs_pinctrl_set_mux(struct pinctrl_dev *pctldev, unsigned selector, reg += bank * 0x20 + pin / 16 * 0x10; shift = pin % 16 * 2; - writel(0x3 << shift, reg + CLR); - writel(g->muxsel[i] << shift, reg + SET); + mxs_pinctrl_rmwl(g->muxsel[i], 0x3, shift, reg); } return 0; @@ -279,8 +288,7 @@ static int mxs_pinconf_group_set(struct pinctrl_dev *pctldev, /* mA */ if (config & MA_PRESENT) { shift = pin % 8 * 4; - writel(0x3 << shift, reg + CLR); - writel(ma << shift, reg + SET); + mxs_pinctrl_rmwl(ma, 0x3, shift, reg); } /* vol */ From 7903d4f5e1dec53963cba9b1bc472a76a3532e07 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 22 May 2017 14:25:49 +0800 Subject: [PATCH 0111/1065] pinctrl: sunxi: Fix SPDIF function name for A83T We use well known standard names for functions that have name, such as I2C, SPI, SPDIF, etc.. Fix the function name of SPDIF, which was named OWA (One Wire Audio) based on Allwinner datasheets. Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support") Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c index 9aec1d2232dd..6624499eae72 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c @@ -394,7 +394,7 @@ static const struct sunxi_desc_pin sun8i_a83t_pins[] = { SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 18), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x3, "owa")), /* DOUT */ + SUNXI_FUNCTION(0x3, "spdif")), /* DOUT */ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 19), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out")), From e7c1572f6565d8b2b2e3be9cffa022a8cd6a6643 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 18 May 2017 14:58:52 +0200 Subject: [PATCH 0112/1065] MAINTAINERS: sort F entries for Marvell EBU maintainers This commit sorts alphabetically the file entries of the Marvell EBU maintainers in the MAINTAINERS file. Signed-off-by: Thomas Petazzoni Acked-by: Jason Cooper Signed-off-by: Gregory CLEMENT --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9e984645c4b0..c186b9533c08 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1489,13 +1489,13 @@ M: Gregory Clement M: Sebastian Hesselbarth L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -F: arch/arm/mach-mvebu/ -F: drivers/rtc/rtc-armada38x.c F: arch/arm/boot/dts/armada* F: arch/arm/boot/dts/kirkwood* +F: arch/arm/configs/mvebu_*_defconfig +F: arch/arm/mach-mvebu/ F: arch/arm64/boot/dts/marvell/armada* F: drivers/cpufreq/mvebu-cpufreq.c -F: arch/arm/configs/mvebu_*_defconfig +F: drivers/rtc/rtc-armada38x.c ARM/Marvell Berlin SoC support M: Jisheng Zhang From 1cb0b57fec06a616d98deaeda1924f8e45e1e4de Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 18 May 2017 14:58:53 +0200 Subject: [PATCH 0113/1065] MAINTAINERS: add irqchip related drivers to Marvell EBU maintainers This commit updates the MAINTAINERS file so that the Marvell EBU maintainers are also responsible for their irqchip drivers in drivers/irqchip/. Signed-off-by: Thomas Petazzoni Acked-by: Jason Cooper Signed-off-by: Gregory CLEMENT --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index c186b9533c08..7217bb538023 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1495,6 +1495,8 @@ F: arch/arm/configs/mvebu_*_defconfig F: arch/arm/mach-mvebu/ F: arch/arm64/boot/dts/marvell/armada* F: drivers/cpufreq/mvebu-cpufreq.c +F: drivers/irqchip/irq-armada-370-xp.c +F: drivers/irqchip/irq-mvebu-* F: drivers/rtc/rtc-armada38x.c ARM/Marvell Berlin SoC support From efad8396e906d095521791e0408293c101543e50 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 8 May 2017 21:36:37 -0700 Subject: [PATCH 0114/1065] wcn36xx: Close SMD channel on device removal The SMD channel is not the primary WCNSS channel and must explicitly be closed as the device is removed, or the channel will already by open on a subsequent probe call in e.g. the case of reloading the kernel module. This issue was introduced because I simplified the underlying SMD implementation while the SMD adaptions of the driver sat on the mailing list, but missed to update these patches. The patch does however only apply back to the transition to rpmsg, hence the limited Fixes. Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Reported-by: Eyal Ilsar Signed-off-by: Bjorn Andersson Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wcn36xx/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c index d5e993dc9b23..517a315e259b 100644 --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1271,6 +1271,8 @@ static int wcn36xx_remove(struct platform_device *pdev) qcom_smem_state_put(wcn->tx_enable_state); qcom_smem_state_put(wcn->tx_rings_empty_state); + rpmsg_destroy_ept(wcn->smd_channel); + iounmap(wcn->dxe_base); iounmap(wcn->ccu_base); From 29226b198bb26f8e23985d011a9301cee5550da8 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 18 May 2017 17:09:59 +0100 Subject: [PATCH 0115/1065] ARM: 8675/1: MCPM: ensure not to enter __hyp_soft_restart from loopback and cpu_power_down Commit 9da5ac236de6 ("ARM: soft-reboot into same mode that we entered the kernel") added support to enter the new kernel in the same processor mode as the previous one when we soft-reboot from one kernel into another by pass a flag to cpu_reset() so it knows what to do exactly. However it missed to make similar changes in MCPM code. Due to the missing flag, the CPUs enter HYP mode which is not supported with MCPM. MCPM works only in secure mode as it manages CCI. This patch aligns the cpu_reset call in MCPM with other changes in the above mentioned commit by making phys_reset_t to follow the prototype of cpu_reset(). Fixes: 9da5ac236de6 ("ARM: soft-reboot into same mode that we entered the kernel") Acked-by: Nicolas Pitre Signed-off-by: Sudeep Holla Signed-off-by: Russell King --- arch/arm/common/mcpm_entry.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index cf062472e07b..2b913f17d50f 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -235,7 +235,7 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) return ret; } -typedef void (*phys_reset_t)(unsigned long); +typedef typeof(cpu_reset) phys_reset_t; void mcpm_cpu_power_down(void) { @@ -300,7 +300,7 @@ void mcpm_cpu_power_down(void) * on the CPU. */ phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset); - phys_reset(__pa_symbol(mcpm_entry_point)); + phys_reset(__pa_symbol(mcpm_entry_point), false); /* should never get here */ BUG(); @@ -389,7 +389,7 @@ static int __init nocache_trampoline(unsigned long _arg) __mcpm_cpu_down(cpu, cluster); phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset); - phys_reset(__pa_symbol(mcpm_entry_point)); + phys_reset(__pa_symbol(mcpm_entry_point), false); BUG(); } From 9a307403d374b993061f5992a6e260c944920d0b Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 23 May 2017 12:24:40 -0400 Subject: [PATCH 0116/1065] nfsd4: fix null dereference on replay if we receive a compound such that: - the sessionid, slot, and sequence number in the SEQUENCE op match a cached succesful reply with N ops, and - the Nth operation of the compound is a PUTFH, PUTPUBFH, PUTROOTFH, or RESTOREFH, then nfsd4_sequence will return 0 and set cstate->status to nfserr_replay_cache. The current filehandle will not be set. This will cause us to call check_nfsd_access with first argument NULL. To nfsd4_compound it looks like we just succesfully executed an operation that set a filehandle, but the current filehandle is not set. Fix this by moving the nfserr_replay_cache earlier. There was never any reason to have it after the encode_op label, since the only case where he hit that is when opdesc->op_func sets it. Note that there are two ways we could hit this case: - a client is resending a previously sent compound that ended with one of the four PUTFH-like operations, or - a client is sending a *new* compound that (incorrectly) shares sessionid, slot, and sequence number with a previously sent compound, and the length of the previously sent compound happens to match the position of a PUTFH-like operation in the new compound. The second is obviously incorrect client behavior. The first is also very strange--the only purpose of a PUTFH-like operation is to set the current filehandle to be used by the following operation, so there's no point in having it as the last in a compound. So it's likely this requires a buggy or malicious client to reproduce. Reported-by: Scott Mayhew Cc: stable@kernel.vger.org Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4proc.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index c453a1998e00..dadb3bf305b2 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -1769,6 +1769,12 @@ nfsd4_proc_compound(struct svc_rqst *rqstp, opdesc->op_get_currentstateid(cstate, &op->u); op->status = opdesc->op_func(rqstp, cstate, &op->u); + /* Only from SEQUENCE */ + if (cstate->status == nfserr_replay_cache) { + dprintk("%s NFS4.1 replay from cache\n", __func__); + status = op->status; + goto out; + } if (!op->status) { if (opdesc->op_set_currentstateid) opdesc->op_set_currentstateid(cstate, &op->u); @@ -1779,14 +1785,7 @@ nfsd4_proc_compound(struct svc_rqst *rqstp, if (need_wrongsec_check(rqstp)) op->status = check_nfsd_access(current_fh->fh_export, rqstp); } - encode_op: - /* Only from SEQUENCE */ - if (cstate->status == nfserr_replay_cache) { - dprintk("%s NFS4.1 replay from cache\n", __func__); - status = op->status; - goto out; - } if (op->status == nfserr_replay_me) { op->replay = &cstate->replay_owner->so_replay; nfsd4_encode_replay(&resp->xdr, op); From f3c0eb05e258c6a48c2d1ef2fa71ffb6ff63cd18 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Thu, 18 May 2017 18:01:43 +0200 Subject: [PATCH 0117/1065] netfilter: conntrack: fix false CRC32c mismatch using paged skb sctp_compute_cksum() implementation assumes that at least the SCTP header is in the linear part of skb: modify conntrack error callback to avoid false CRC32c mismatch, if the transport header is partially/entirely paged. Fixes: cf6e007eef83 ("netfilter: conntrack: validate SCTP crc32c in PREROUTING") Signed-off-by: Davide Caratti Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_proto_sctp.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c index 13875d599a85..1c5b14a6cab3 100644 --- a/net/netfilter/nf_conntrack_proto_sctp.c +++ b/net/netfilter/nf_conntrack_proto_sctp.c @@ -512,16 +512,19 @@ static int sctp_error(struct net *net, struct nf_conn *tpl, struct sk_buff *skb, u8 pf, unsigned int hooknum) { const struct sctphdr *sh; - struct sctphdr _sctph; const char *logmsg; - sh = skb_header_pointer(skb, dataoff, sizeof(_sctph), &_sctph); - if (!sh) { + if (skb->len < dataoff + sizeof(struct sctphdr)) { logmsg = "nf_ct_sctp: short packet "; goto out_invalid; } if (net->ct.sysctl_checksum && hooknum == NF_INET_PRE_ROUTING && skb->ip_summed == CHECKSUM_NONE) { + if (!skb_make_writable(skb, dataoff + sizeof(struct sctphdr))) { + logmsg = "nf_ct_sctp: failed to read header "; + goto out_invalid; + } + sh = (const struct sctphdr *)(skb->data + dataoff); if (sh->checksum != sctp_compute_cksum(skb, dataoff)) { logmsg = "nf_ct_sctp: bad CRC "; goto out_invalid; From d2df92e98a34a5619dadd29c6291113c009181e7 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 21 May 2017 00:37:10 +0200 Subject: [PATCH 0118/1065] netfilter: nft_set_rbtree: handle element re-addition after deletion The existing code selects no next branch to be inspected when re-inserting an inactive element into the rb-tree, looping endlessly. This patch restricts the check for active elements to the EEXIST case only. Fixes: e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates") Reported-by: Wolfgang Bumiller Tested-by: Wolfgang Bumiller Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_set_rbtree.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index e97e2fb53f0a..fbdbaa00dd5f 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -116,17 +116,17 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set, else if (d > 0) p = &parent->rb_right; else { - if (nft_set_elem_active(&rbe->ext, genmask)) { - if (nft_rbtree_interval_end(rbe) && - !nft_rbtree_interval_end(new)) - p = &parent->rb_left; - else if (!nft_rbtree_interval_end(rbe) && - nft_rbtree_interval_end(new)) - p = &parent->rb_right; - else { - *ext = &rbe->ext; - return -EEXIST; - } + if (nft_rbtree_interval_end(rbe) && + !nft_rbtree_interval_end(new)) { + p = &parent->rb_left; + } else if (!nft_rbtree_interval_end(rbe) && + nft_rbtree_interval_end(new)) { + p = &parent->rb_right; + } else if (nft_set_elem_active(&rbe->ext, genmask)) { + *ext = &rbe->ext; + return -EEXIST; + } else { + p = &parent->rb_left; } } } From 124dffea9e8e372509e055aebd118e85518fd644 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sun, 21 May 2017 22:38:11 +0800 Subject: [PATCH 0119/1065] netfilter: nat: use atomic bit op to clear the _SRC_NAT_DONE_BIT We need to clear the IPS_SRC_NAT_DONE_BIT to indicate that the ct has been removed from nat_bysource table. But unfortunately, we use the non-atomic bit operation: "ct->status &= ~IPS_NAT_DONE_MASK". So there's a race condition that we may clear the _DYING_BIT set by another CPU unexpectedly. Since we don't care about the IPS_DST_NAT_DONE_BIT, so just using clear_bit to clear the IPS_SRC_NAT_DONE_BIT is enough. Also note, this is the last user which use the non-atomic bit operation to update the confirmed ct->status. Reported-by: Florian Westphal Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_nat_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_nat_core.c b/net/netfilter/nf_nat_core.c index ef0be325a0c6..6c72922d20ca 100644 --- a/net/netfilter/nf_nat_core.c +++ b/net/netfilter/nf_nat_core.c @@ -566,7 +566,7 @@ static int nf_nat_proto_clean(struct nf_conn *ct, void *data) * Else, when the conntrack is destoyed, nf_nat_cleanup_conntrack() * will delete entry from already-freed table. */ - ct->status &= ~IPS_NAT_DONE_MASK; + clear_bit(IPS_SRC_NAT_DONE_BIT, &ct->status); rhltable_remove(&nf_nat_bysource_table, &ct->nat_bysource, nf_nat_bysource_params); From 0648a07c9b22acc33ead0645cf8f607b0c9c7e32 Mon Sep 17 00:00:00 2001 From: Artem Savkov Date: Sat, 20 May 2017 09:58:10 +0200 Subject: [PATCH 0120/1065] scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get() rdac_failover_get references struct rdac_controller as ctlr->ms_sdev->handler_data->ctlr for no apparent reason. Besides being inefficient this also introduces a null-pointer dereference as send_mode_select() sets ctlr->ms_sdev to NULL before calling rdac_failover_get(): [ 18.432550] device-mapper: multipath service-time: version 0.3.0 loaded [ 18.436124] BUG: unable to handle kernel NULL pointer dereference at 0000000000000790 [ 18.436129] IP: send_mode_select+0xca/0x560 [ 18.436129] PGD 0 [ 18.436130] P4D 0 [ 18.436130] [ 18.436132] Oops: 0000 [#1] SMP [ 18.436133] Modules linked in: dm_service_time sd_mod dm_multipath amdkfd amd_iommu_v2 radeon(+) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm qla2xxx drm serio_raw scsi_transport_fc bnx2 i2c_core dm_mirror dm_region_hash dm_log dm_mod [ 18.436143] CPU: 4 PID: 443 Comm: kworker/u16:2 Not tainted 4.12.0-rc1.1.el7.test.x86_64 #1 [ 18.436144] Hardware name: IBM BladeCenter LS22 -[79013SG]-/Server Blade, BIOS -[L8E164AUS-1.07]- 05/25/2011 [ 18.436145] Workqueue: kmpath_rdacd send_mode_select [ 18.436146] task: ffff880225116a40 task.stack: ffffc90002bd8000 [ 18.436148] RIP: 0010:send_mode_select+0xca/0x560 [ 18.436148] RSP: 0018:ffffc90002bdbda8 EFLAGS: 00010246 [ 18.436149] RAX: 0000000000000000 RBX: ffffc90002bdbe08 RCX: ffff88017ef04a80 [ 18.436150] RDX: ffffc90002bdbe08 RSI: ffff88017ef04a80 RDI: ffff8802248e4388 [ 18.436151] RBP: ffffc90002bdbe48 R08: 0000000000000000 R09: ffffffff81c104c0 [ 18.436151] R10: 00000000000001ff R11: 000000000000035a R12: ffffc90002bdbdd8 [ 18.436152] R13: ffff8802248e4390 R14: ffff880225152800 R15: ffff8802248e4400 [ 18.436153] FS: 0000000000000000(0000) GS:ffff880227d00000(0000) knlGS:0000000000000000 [ 18.436154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 18.436154] CR2: 0000000000000790 CR3: 000000042535b000 CR4: 00000000000006e0 [ 18.436155] Call Trace: [ 18.436159] ? rdac_activate+0x14e/0x150 [ 18.436161] ? refcount_dec_and_test+0x11/0x20 [ 18.436162] ? kobject_put+0x1c/0x50 [ 18.436165] ? scsi_dh_activate+0x6f/0xd0 [ 18.436168] process_one_work+0x149/0x360 [ 18.436170] worker_thread+0x4d/0x3c0 [ 18.436172] kthread+0x109/0x140 [ 18.436173] ? rescuer_thread+0x380/0x380 [ 18.436174] ? kthread_park+0x60/0x60 [ 18.436176] ret_from_fork+0x2c/0x40 [ 18.436177] Code: 49 c7 46 20 00 00 00 00 4c 89 ef c6 07 00 0f 1f 40 00 45 31 ed c7 45 b0 05 00 00 00 44 89 6d b4 4d 89 f5 4c 8b 75 a8 49 8b 45 20 <48> 8b b0 90 07 00 00 48 8b 56 10 8b 42 10 48 8d 7a 28 85 c0 0f [ 18.436192] RIP: send_mode_select+0xca/0x560 RSP: ffffc90002bdbda8 [ 18.436192] CR2: 0000000000000790 [ 18.436198] ---[ end trace 40f3e4dca1ffabdd ]--- [ 18.436199] Kernel panic - not syncing: Fatal exception [ 18.436222] Kernel Offset: disabled [-- MARK -- Thu May 18 11:45:00 2017] Fixes: 327825574132 scsi_dh_rdac: switch to scsi_execute_req_flags() Cc: stable@vger.kernel.org Signed-off-by: Artem Savkov Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/device_handler/scsi_dh_rdac.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 3cbab8710e58..2ceff585f189 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -265,18 +265,16 @@ static unsigned int rdac_failover_get(struct rdac_controller *ctlr, struct list_head *list, unsigned char *cdb) { - struct scsi_device *sdev = ctlr->ms_sdev; - struct rdac_dh_data *h = sdev->handler_data; struct rdac_mode_common *common; unsigned data_size; struct rdac_queue_data *qdata; u8 *lun_table; - if (h->ctlr->use_ms10) { + if (ctlr->use_ms10) { struct rdac_pg_expanded *rdac_pg; data_size = sizeof(struct rdac_pg_expanded); - rdac_pg = &h->ctlr->mode_select.expanded; + rdac_pg = &ctlr->mode_select.expanded; memset(rdac_pg, 0, data_size); common = &rdac_pg->common; rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40; @@ -288,7 +286,7 @@ static unsigned int rdac_failover_get(struct rdac_controller *ctlr, struct rdac_pg_legacy *rdac_pg; data_size = sizeof(struct rdac_pg_legacy); - rdac_pg = &h->ctlr->mode_select.legacy; + rdac_pg = &ctlr->mode_select.legacy; memset(rdac_pg, 0, data_size); common = &rdac_pg->common; rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER; @@ -304,7 +302,7 @@ static unsigned int rdac_failover_get(struct rdac_controller *ctlr, } /* Prepare the command. */ - if (h->ctlr->use_ms10) { + if (ctlr->use_ms10) { cdb[0] = MODE_SELECT_10; cdb[7] = data_size >> 8; cdb[8] = data_size & 0xff; From 5e901d0b15c0cba8c5ba55e4be46fc5a0e2f3cb9 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Fri, 19 May 2017 01:33:15 -0700 Subject: [PATCH 0121/1065] scsi: qedi: Fix bad pte call trace when iscsiuio is stopped. munmap done by iscsiuio during a stop of the service triggers a "bad pte" warning sometimes. munmap kernel path goes through the mmapped pages and has a validation check for mapcount (in struct page) to be zero or above. kzalloc, which we had used to allocate udev->ctrl, uses slab allocations, which re-uses mapcount (union) for other purposes that can make the mapcount look negative. Avoid all these trouble by invoking one of the __get_free_pages wrappers to be used instead of kzalloc for udev->ctrl. BUG: Bad page map in process iscsiuio pte:80000000aa624067 pmd:3e6777067 page:ffffea0002a98900 count:2 mapcount:-2143289280 mapping: (null) index:0xffff8800aa624e00 page flags: 0x10075d00000090(dirty|slab) page dumped because: bad pte addr:00007fcba70a3000 vm_flags:0c0400fb anon_vma: (null) mapping:ffff8803edf66e90 index:0 Call Trace: dump_stack+0x19/0x1b print_bad_pte+0x1af/0x250 unmap_page_range+0x7a7/0x8a0 unmap_single_vma+0x81/0xf0 unmap_vmas+0x49/0x90 unmap_region+0xbe/0x140 ? vma_rb_erase+0x121/0x220 do_munmap+0x245/0x420 vm_munmap+0x41/0x60 SyS_munmap+0x22/0x30 tracesys+0xdd/0xe2 Signed-off-by: Arun Easi Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_main.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index 92775a8b74b1..997e3052a706 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -151,6 +151,11 @@ static int qedi_uio_close(struct uio_info *uinfo, struct inode *inode) static void __qedi_free_uio_rings(struct qedi_uio_dev *udev) { + if (udev->uctrl) { + free_page((unsigned long)udev->uctrl); + udev->uctrl = NULL; + } + if (udev->ll2_ring) { free_page((unsigned long)udev->ll2_ring); udev->ll2_ring = NULL; @@ -169,7 +174,6 @@ static void __qedi_free_uio(struct qedi_uio_dev *udev) __qedi_free_uio_rings(udev); pci_dev_put(udev->pdev); - kfree(udev->uctrl); kfree(udev); } @@ -208,6 +212,11 @@ static int __qedi_alloc_uio_rings(struct qedi_uio_dev *udev) if (udev->ll2_ring || udev->ll2_buf) return rc; + /* Memory for control area. */ + udev->uctrl = (void *)get_zeroed_page(GFP_KERNEL); + if (!udev->uctrl) + return -ENOMEM; + /* Allocating memory for LL2 ring */ udev->ll2_ring_size = QEDI_PAGE_SIZE; udev->ll2_ring = (void *)get_zeroed_page(GFP_KERNEL | __GFP_COMP); @@ -237,7 +246,6 @@ exit_alloc_ring: static int qedi_alloc_uio_rings(struct qedi_ctx *qedi) { struct qedi_uio_dev *udev = NULL; - struct qedi_uio_ctrl *uctrl = NULL; int rc = 0; list_for_each_entry(udev, &qedi_udev_list, list) { @@ -258,21 +266,14 @@ static int qedi_alloc_uio_rings(struct qedi_ctx *qedi) goto err_udev; } - uctrl = kzalloc(sizeof(*uctrl), GFP_KERNEL); - if (!uctrl) { - rc = -ENOMEM; - goto err_uctrl; - } - udev->uio_dev = -1; udev->qedi = qedi; udev->pdev = qedi->pdev; - udev->uctrl = uctrl; rc = __qedi_alloc_uio_rings(udev); if (rc) - goto err_uio_rings; + goto err_uctrl; list_add(&udev->list, &qedi_udev_list); @@ -283,8 +284,6 @@ static int qedi_alloc_uio_rings(struct qedi_ctx *qedi) udev->rx_pkt = udev->ll2_buf + LL2_SINGLE_BUF_SIZE; return 0; - err_uio_rings: - kfree(uctrl); err_uctrl: kfree(udev); err_udev: From fc2fbf0d422b54b487c5e7413acd54cbac6d4151 Mon Sep 17 00:00:00 2001 From: "manish.rangankar@cavium.com" Date: Fri, 19 May 2017 01:33:16 -0700 Subject: [PATCH 0122/1065] scsi: qedi: Correctly set firmware max supported BDs. Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qedi/qedi.h b/drivers/scsi/qedi/qedi.h index 5ca3e8c28a3f..269dac620cf8 100644 --- a/drivers/scsi/qedi/qedi.h +++ b/drivers/scsi/qedi/qedi.h @@ -38,7 +38,7 @@ struct qedi_endpoint; #define QEDI_MAX_ISCSI_TASK 4096 #define QEDI_MAX_TASK_NUM 0x0FFF #define QEDI_MAX_ISCSI_CONNS_PER_HBA 1024 -#define QEDI_ISCSI_MAX_BDS_PER_CMD 256 /* Firmware max BDs is 256 */ +#define QEDI_ISCSI_MAX_BDS_PER_CMD 255 /* Firmware max BDs is 255 */ #define MAX_OUSTANDING_TASKS_PER_CON 1024 #define QEDI_MAX_BD_LEN 0xffff From d0788a528d9e09d7c17f05dd61c4cc492181f817 Mon Sep 17 00:00:00 2001 From: "manish.rangankar@cavium.com" Date: Fri, 19 May 2017 01:33:17 -0700 Subject: [PATCH 0123/1065] scsi: qedi: Set dma_boundary to 0xfff. Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi.h | 1 + drivers/scsi/qedi/qedi_iscsi.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/scsi/qedi/qedi.h b/drivers/scsi/qedi/qedi.h index 269dac620cf8..32632c9b2276 100644 --- a/drivers/scsi/qedi/qedi.h +++ b/drivers/scsi/qedi/qedi.h @@ -63,6 +63,7 @@ struct qedi_endpoint; #define QEDI_PAGE_MASK (~((QEDI_PAGE_SIZE) - 1)) #define QEDI_PAGE_SIZE 4096 +#define QEDI_HW_DMA_BOUNDARY 0xfff #define QEDI_PATH_HANDLE 0xFE0000000UL struct qedi_uio_ctrl { diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c index 3548d46f9b27..19177931b84c 100644 --- a/drivers/scsi/qedi/qedi_iscsi.c +++ b/drivers/scsi/qedi/qedi_iscsi.c @@ -59,6 +59,7 @@ struct scsi_host_template qedi_host_template = { .this_id = -1, .sg_tablesize = QEDI_ISCSI_MAX_BDS_PER_CMD, .max_sectors = 0xffff, + .dma_boundary = QEDI_HW_DMA_BOUNDARY, .cmd_per_lun = 128, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = qedi_shost_attrs, From 0ea9314f4e6c69f8d732e0a9310114c2de35ada8 Mon Sep 17 00:00:00 2001 From: "manish.rangankar@cavium.com" Date: Fri, 19 May 2017 01:33:18 -0700 Subject: [PATCH 0124/1065] scsi: qedi: Fix endpoint NULL panic in qedi_set_path. RIP: 0010:qedi_set_path+0x114/0x570 [qedi] Call Trace: [] iscsi_if_recv_msg+0x623/0x14a0 [] ? rhashtable_lookup_compare+0x36/0x70 [] iscsi_if_rx+0x8e/0x1f0 [] netlink_unicast+0xed/0x1b0 [] netlink_sendmsg+0x330/0x770 [] sock_sendmsg+0xb0/0xf0 [] ? __switch_to+0x17b/0x4b0 [] ? __schedule+0x2d8/0x900 [] ___sys_sendmsg+0x3a9/0x3c0 [] ? get_futex_key+0x1c8/0x2b0 [] ? futex_wake+0x80/0x160 Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_iscsi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c index 19177931b84c..87f0af358b33 100644 --- a/drivers/scsi/qedi/qedi_iscsi.c +++ b/drivers/scsi/qedi/qedi_iscsi.c @@ -1224,8 +1224,12 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data) iscsi_cid = (u32)path_data->handle; qedi_ep = qedi->ep_tbl[iscsi_cid]; - QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_CONN, + QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_INFO, "iscsi_cid=0x%x, qedi_ep=%p\n", iscsi_cid, qedi_ep); + if (!qedi_ep) { + ret = -EINVAL; + goto set_path_exit; + } if (!is_valid_ether_addr(&path_data->mac_addr[0])) { QEDI_NOTICE(&qedi->dbg_ctx, "dst mac NOT VALID\n"); From 962ea1c0df6c5a36f4477aa4a10f4acc0f5f56bd Mon Sep 17 00:00:00 2001 From: "manish.rangankar@cavium.com" Date: Fri, 19 May 2017 01:33:19 -0700 Subject: [PATCH 0125/1065] scsi: qedi: Set firmware tcp msl timer value. Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index 997e3052a706..62ba0550b68c 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -827,6 +827,7 @@ static int qedi_set_iscsi_pf_param(struct qedi_ctx *qedi) qedi->pf_params.iscsi_pf_params.num_uhq_pages_in_ring = num_sq_pages; qedi->pf_params.iscsi_pf_params.num_queues = qedi->num_queues; qedi->pf_params.iscsi_pf_params.debug_mode = qedi_fw_debug; + qedi->pf_params.iscsi_pf_params.two_msl_timer = 4000; for (log_page_size = 0 ; log_page_size < 32 ; log_page_size++) { if ((1 << log_page_size) == PAGE_SIZE) From 3d61a3132212d6b1c8c6914700d5f6456712ac08 Mon Sep 17 00:00:00 2001 From: Nilesh Javali Date: Fri, 19 May 2017 01:33:20 -0700 Subject: [PATCH 0126/1065] scsi: qedi: set max_fin_rt default value max_fin_rt is the maximum re-transmission of FIN packets as part of the termination flow. After reaching this value the FW will send a single RESET. Signed-off-by: Nilesh Javali Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index 62ba0550b68c..09a294634bc7 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -828,6 +828,7 @@ static int qedi_set_iscsi_pf_param(struct qedi_ctx *qedi) qedi->pf_params.iscsi_pf_params.num_queues = qedi->num_queues; qedi->pf_params.iscsi_pf_params.debug_mode = qedi_fw_debug; qedi->pf_params.iscsi_pf_params.two_msl_timer = 4000; + qedi->pf_params.iscsi_pf_params.max_fin_rt = 2; for (log_page_size = 0 ; log_page_size < 32 ; log_page_size++) { if ((1 << log_page_size) == PAGE_SIZE) From b19775e4785996503b106e59d9d3a8839e677afd Mon Sep 17 00:00:00 2001 From: "manish.rangankar@cavium.com" Date: Fri, 19 May 2017 01:33:21 -0700 Subject: [PATCH 0127/1065] scsi: qedi: Fix endpoint NULL panic during recovery. Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_fw.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c index d6978cbc56f0..8bc7ee1a8ca8 100644 --- a/drivers/scsi/qedi/qedi_fw.c +++ b/drivers/scsi/qedi/qedi_fw.c @@ -1494,6 +1494,8 @@ static int qedi_send_iscsi_tmf(struct qedi_conn *qedi_conn, tmf_hdr = (struct iscsi_tm *)mtask->hdr; qedi_cmd = (struct qedi_cmd *)mtask->dd_data; ep = qedi_conn->ep; + if (!ep) + return -ENODEV; tid = qedi_get_task_idx(qedi); if (tid == -1) From e274086e473c0cbea18051ae0a78a05f8d658f47 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Mon, 22 May 2017 17:46:58 +0800 Subject: [PATCH 0128/1065] drm/i915/gvt: clean up unsubmited workloads before destroying kmem cache MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is to fix a memory leak issue caused by unfreed gvtg workload objects. Walk through the workload list and free all of the remained workloads before destroying kmem cache. [179.885211] INFO: Object 0xffff9cef10003b80 @offset=7040 [179.885657] kmem_cache_destroy gvt-g_vgpu_workload: Slab cache still has objects [179.886146] CPU: 2 PID: 2318 Comm: win_lucas Tainted: G    B   W       4.11.0+ #1 [179.887223] Call Trace: [179.887394] dump_stack+0x63/0x90 [179.887617] kmem_cache_destroy+0x1cf/0x1e0 [179.887960] intel_vgpu_clean_execlist+0x15/0x20 [i915] [179.888365] intel_gvt_destroy_vgpu+0x4c/0xd0 [i915] [179.888688] intel_vgpu_remove+0x2a/0x30 [kvmgt] [179.888988] mdev_device_remove_ops+0x23/0x50 [mdev] [179.889309] mdev_device_remove+0xe4/0x190 [mdev] [179.889615] remove_store+0x7d/0xb0 [mdev] [179.889885] dev_attr_store+0x18/0x30 [179.890129] sysfs_kf_write+0x37/0x40 [179.890371] kernfs_fop_write+0x107/0x180 [179.890632] __vfs_write+0x37/0x160 [179.890865] ? kmem_cache_alloc+0xd7/0x1b0 [179.891116] ? apparmor_file_permission+0x1a/0x20 [179.891372] ? security_file_permission+0x3b/0xc0 [179.891628] vfs_write+0xb8/0x1b0 [179.891812] SyS_write+0x55/0xc0 [179.891992] entry_SYSCALL_64_fastpath+0x1e/0xad Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/execlist.c | 30 +++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/execlist.c b/drivers/gpu/drm/i915/gvt/execlist.c index dca989eb2d42..24fe04d6307b 100644 --- a/drivers/gpu/drm/i915/gvt/execlist.c +++ b/drivers/gpu/drm/i915/gvt/execlist.c @@ -779,8 +779,26 @@ static void init_vgpu_execlist(struct intel_vgpu *vgpu, int ring_id) vgpu_vreg(vgpu, ctx_status_ptr_reg) = ctx_status_ptr.dw; } +static void clean_workloads(struct intel_vgpu *vgpu, unsigned long engine_mask) +{ + struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv; + struct intel_engine_cs *engine; + struct intel_vgpu_workload *pos, *n; + unsigned int tmp; + + /* free the unsubmited workloads in the queues. */ + for_each_engine_masked(engine, dev_priv, engine_mask, tmp) { + list_for_each_entry_safe(pos, n, + &vgpu->workload_q_head[engine->id], list) { + list_del_init(&pos->list); + free_workload(pos); + } + } +} + void intel_vgpu_clean_execlist(struct intel_vgpu *vgpu) { + clean_workloads(vgpu, ALL_ENGINES); kmem_cache_destroy(vgpu->workloads); } @@ -811,17 +829,9 @@ void intel_vgpu_reset_execlist(struct intel_vgpu *vgpu, { struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv; struct intel_engine_cs *engine; - struct intel_vgpu_workload *pos, *n; unsigned int tmp; - for_each_engine_masked(engine, dev_priv, engine_mask, tmp) { - /* free the unsubmited workload in the queue */ - list_for_each_entry_safe(pos, n, - &vgpu->workload_q_head[engine->id], list) { - list_del_init(&pos->list); - free_workload(pos); - } - + clean_workloads(vgpu, engine_mask); + for_each_engine_masked(engine, dev_priv, engine_mask, tmp) init_vgpu_execlist(vgpu, engine->id); - } } From 75b61250bf687c686ba6850c34eccc1303b0b827 Mon Sep 17 00:00:00 2001 From: Varun Prakash Date: Tue, 16 May 2017 19:23:44 +0530 Subject: [PATCH 0129/1065] scsi: libcxgbi: fix skb use after free skb->data is assigned to task->hdr in cxgbi_conn_alloc_pdu(), skb gets freed after tx but task->hdr is still dereferenced in iscsi_tcp_task_xmit() to avoid this call skb_get() after allocating skb and free the skb in cxgbi_cleanup_task() or before allocating new skb in cxgbi_conn_alloc_pdu(). Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen --- drivers/scsi/cxgbi/libcxgbi.c | 25 ++++++++++++++++++------- drivers/scsi/cxgbi/libcxgbi.h | 16 ++++++++-------- 2 files changed, 26 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index bd7d39ecbd24..fb06974c88c1 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -1873,6 +1873,11 @@ int cxgbi_conn_alloc_pdu(struct iscsi_task *task, u8 opcode) tcp_task->dd_data = tdata; task->hdr = NULL; + if (tdata->skb) { + kfree_skb(tdata->skb); + tdata->skb = NULL; + } + if (SKB_MAX_HEAD(cdev->skb_tx_rsvd) > (512 * MAX_SKB_FRAGS) && (opcode == ISCSI_OP_SCSI_DATA_OUT || (opcode == ISCSI_OP_SCSI_CMD && @@ -1890,6 +1895,7 @@ int cxgbi_conn_alloc_pdu(struct iscsi_task *task, u8 opcode) return -ENOMEM; } + skb_get(tdata->skb); skb_reserve(tdata->skb, cdev->skb_tx_rsvd); task->hdr = (struct iscsi_hdr *)tdata->skb->data; task->hdr_max = SKB_TX_ISCSI_PDU_HEADER_MAX; /* BHS + AHS */ @@ -2035,9 +2041,9 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task) unsigned int datalen; int err; - if (!skb) { + if (!skb || cxgbi_skcb_test_flag(skb, SKCBF_TX_DONE)) { log_debug(1 << CXGBI_DBG_ISCSI | 1 << CXGBI_DBG_PDU_TX, - "task 0x%p, skb NULL.\n", task); + "task 0x%p, skb 0x%p\n", task, skb); return 0; } @@ -2050,7 +2056,6 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task) } datalen = skb->data_len; - tdata->skb = NULL; /* write ppod first if using ofldq to write ppod */ if (ttinfo->flags & CXGBI_PPOD_INFO_FLAG_VALID) { @@ -2078,6 +2083,7 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task) pdulen += ISCSI_DIGEST_SIZE; task->conn->txdata_octets += pdulen; + cxgbi_skcb_set_flag(skb, SKCBF_TX_DONE); return 0; } @@ -2086,7 +2092,6 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task) "task 0x%p, skb 0x%p, len %u/%u, %d EAGAIN.\n", task, skb, skb->len, skb->data_len, err); /* reset skb to send when we are called again */ - tdata->skb = skb; return err; } @@ -2094,7 +2099,8 @@ int cxgbi_conn_xmit_pdu(struct iscsi_task *task) "itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", task->itt, skb, skb->len, skb->data_len, err); - kfree_skb(skb); + __kfree_skb(tdata->skb); + tdata->skb = NULL; iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); @@ -2113,8 +2119,10 @@ void cxgbi_cleanup_task(struct iscsi_task *task) tcp_task->dd_data = NULL; /* never reached the xmit task callout */ - if (tdata->skb) - __kfree_skb(tdata->skb); + if (tdata->skb) { + kfree_skb(tdata->skb); + tdata->skb = NULL; + } task_release_itt(task, task->hdr_itt); memset(tdata, 0, sizeof(*tdata)); @@ -2714,6 +2722,9 @@ EXPORT_SYMBOL_GPL(cxgbi_attr_is_visible); static int __init libcxgbi_init_module(void) { pr_info("%s", version); + + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, cb) < + sizeof(struct cxgbi_skb_cb)); return 0; } diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h index 18e0ea83d361..239462a75760 100644 --- a/drivers/scsi/cxgbi/libcxgbi.h +++ b/drivers/scsi/cxgbi/libcxgbi.h @@ -195,7 +195,8 @@ struct cxgbi_skb_rx_cb { }; struct cxgbi_skb_tx_cb { - void *l2t; + void *handle; + void *arp_err_handler; struct sk_buff *wr_next; }; @@ -203,6 +204,7 @@ enum cxgbi_skcb_flags { SKCBF_TX_NEED_HDR, /* packet needs a header */ SKCBF_TX_MEM_WRITE, /* memory write */ SKCBF_TX_FLAG_COMPL, /* wr completion flag */ + SKCBF_TX_DONE, /* skb tx done */ SKCBF_RX_COALESCED, /* received whole pdu */ SKCBF_RX_HDR, /* received pdu header */ SKCBF_RX_DATA, /* received pdu payload */ @@ -215,13 +217,13 @@ enum cxgbi_skcb_flags { }; struct cxgbi_skb_cb { - unsigned char ulp_mode; - unsigned long flags; - unsigned int seq; union { struct cxgbi_skb_rx_cb rx; struct cxgbi_skb_tx_cb tx; }; + unsigned char ulp_mode; + unsigned long flags; + unsigned int seq; }; #define CXGBI_SKB_CB(skb) ((struct cxgbi_skb_cb *)&((skb)->cb[0])) @@ -374,11 +376,9 @@ static inline void cxgbi_sock_enqueue_wr(struct cxgbi_sock *csk, cxgbi_skcb_tx_wr_next(skb) = NULL; /* * We want to take an extra reference since both us and the driver - * need to free the packet before it's really freed. We know there's - * just one user currently so we use atomic_set rather than skb_get - * to avoid the atomic op. + * need to free the packet before it's really freed. */ - atomic_set(&skb->users, 2); + skb_get(skb); if (!csk->wr_pending_head) csk->wr_pending_head = skb; From f3cdbe39b2ab0636dec0d5d43b54f1061ce7566c Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 17 May 2017 04:34:37 -0500 Subject: [PATCH 0130/1065] tcmu: fix crash during device removal We currently do tcmu_free_device ->tcmu_netlink_event(TCMU_CMD_REMOVED_DEVICE) -> uio_unregister_device -> kfree(tcmu_dev). The problem is that the kernel does not wait for userspace to do the close() on the uio device before freeing the tcmu_dev. We can then hit a race where the kernel frees the tcmu_dev before userspace does close() and so when close() -> release -> tcmu_release is done, we try to access a freed tcmu_dev. This patch made over the target-pending master branch moves the freeing of the tcmu_dev to when the last reference has been dropped. This also fixes a leak where if tcmu_configure_device was not called on a device we did not free udev->name which was allocated at tcmu_alloc_device time. Signed-off-by: Mike Christie Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_user.c | 46 ++++++++++++++++++++++--------- 1 file changed, 33 insertions(+), 13 deletions(-) diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 9045837f748b..beb5f098f32d 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -97,7 +97,7 @@ struct tcmu_hba { struct tcmu_dev { struct list_head node; - + struct kref kref; struct se_device se_dev; char *name; @@ -969,6 +969,7 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name) udev = kzalloc(sizeof(struct tcmu_dev), GFP_KERNEL); if (!udev) return NULL; + kref_init(&udev->kref); udev->name = kstrdup(name, GFP_KERNEL); if (!udev->name) { @@ -1145,6 +1146,24 @@ static int tcmu_open(struct uio_info *info, struct inode *inode) return 0; } +static void tcmu_dev_call_rcu(struct rcu_head *p) +{ + struct se_device *dev = container_of(p, struct se_device, rcu_head); + struct tcmu_dev *udev = TCMU_DEV(dev); + + kfree(udev->uio_info.name); + kfree(udev->name); + kfree(udev); +} + +static void tcmu_dev_kref_release(struct kref *kref) +{ + struct tcmu_dev *udev = container_of(kref, struct tcmu_dev, kref); + struct se_device *dev = &udev->se_dev; + + call_rcu(&dev->rcu_head, tcmu_dev_call_rcu); +} + static int tcmu_release(struct uio_info *info, struct inode *inode) { struct tcmu_dev *udev = container_of(info, struct tcmu_dev, uio_info); @@ -1152,7 +1171,8 @@ static int tcmu_release(struct uio_info *info, struct inode *inode) clear_bit(TCMU_DEV_BIT_OPEN, &udev->flags); pr_debug("close\n"); - + /* release ref from configure */ + kref_put(&udev->kref, tcmu_dev_kref_release); return 0; } @@ -1272,6 +1292,12 @@ static int tcmu_configure_device(struct se_device *dev) dev->dev_attrib.hw_max_sectors = 128; dev->dev_attrib.hw_queue_depth = 128; + /* + * Get a ref incase userspace does a close on the uio device before + * LIO has initiated tcmu_free_device. + */ + kref_get(&udev->kref); + ret = tcmu_netlink_event(TCMU_CMD_ADDED_DEVICE, udev->uio_info.name, udev->uio_info.uio_dev->minor); if (ret) @@ -1284,11 +1310,13 @@ static int tcmu_configure_device(struct se_device *dev) return 0; err_netlink: + kref_put(&udev->kref, tcmu_dev_kref_release); uio_unregister_device(&udev->uio_info); err_register: vfree(udev->mb_addr); err_vzalloc: kfree(info->name); + info->name = NULL; return ret; } @@ -1302,14 +1330,6 @@ static int tcmu_check_and_free_pending_cmd(struct tcmu_cmd *cmd) return -EINVAL; } -static void tcmu_dev_call_rcu(struct rcu_head *p) -{ - struct se_device *dev = container_of(p, struct se_device, rcu_head); - struct tcmu_dev *udev = TCMU_DEV(dev); - - kfree(udev); -} - static bool tcmu_dev_configured(struct tcmu_dev *udev) { return udev->uio_info.uio_dev ? true : false; @@ -1364,10 +1384,10 @@ static void tcmu_free_device(struct se_device *dev) udev->uio_info.uio_dev->minor); uio_unregister_device(&udev->uio_info); - kfree(udev->uio_info.name); - kfree(udev->name); } - call_rcu(&dev->rcu_head, tcmu_dev_call_rcu); + + /* release ref from init */ + kref_put(&udev->kref, tcmu_dev_kref_release); } enum { From 0037ae47812b1f431cc602100d1d51f37d77b61e Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Mon, 22 May 2017 16:05:22 +0200 Subject: [PATCH 0131/1065] dmaengine: ep93xx: Always start from BASE0 The current buffer is being reset to zero on device_free_chan_resources() but not on device_terminate_all(). It could happen that HW is restarted and expects BASE0 to be used, but the driver is not synchronized and will start from BASE1. One solution is to reset the buffer explicitly in m2p_hw_setup(). Signed-off-by: Alexander Sverdlin Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul --- drivers/dma/ep93xx_dma.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index d37e8dda8079..deb009c3121f 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -323,6 +323,8 @@ static int m2p_hw_setup(struct ep93xx_dma_chan *edmac) | M2P_CONTROL_ENABLE; m2p_set_control(edmac, control); + edmac->buffer = 0; + return 0; } From 98f9de366fccee7572c646af226b2d4b4841e3b5 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Mon, 22 May 2017 16:05:23 +0200 Subject: [PATCH 0132/1065] dmaengine: ep93xx: Don't drain the transfers in terminate_all() Draining the transfers in terminate_all callback happens with IRQs disabled, therefore induces huge latency: irqsoff latency trace v1.1.5 on 4.11.0 -------------------------------------------------------------------- latency: 39770 us, #57/57, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0) ----------------- | task: process-129 (uid:0 nice:0 policy:2 rt_prio:50) ----------------- => started at: _snd_pcm_stream_lock_irqsave => ended at: snd_pcm_stream_unlock_irqrestore _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / delay cmd pid ||||| time | caller \ / ||||| \ | / process-129 0d.s. 3us : _snd_pcm_stream_lock_irqsave process-129 0d.s1 9us : snd_pcm_stream_lock <-_snd_pcm_stream_lock_irqsave process-129 0d.s1 15us : preempt_count_add <-snd_pcm_stream_lock process-129 0d.s2 22us : preempt_count_add <-snd_pcm_stream_lock process-129 0d.s3 32us : snd_pcm_update_hw_ptr0 <-snd_pcm_period_elapsed process-129 0d.s3 41us : soc_pcm_pointer <-snd_pcm_update_hw_ptr0 process-129 0d.s3 50us : dmaengine_pcm_pointer <-soc_pcm_pointer process-129 0d.s3 58us+: snd_dmaengine_pcm_pointer_no_residue <-dmaengine_pcm_pointer process-129 0d.s3 96us : update_audio_tstamp <-snd_pcm_update_hw_ptr0 process-129 0d.s3 103us : snd_pcm_update_state <-snd_pcm_update_hw_ptr0 process-129 0d.s3 112us : xrun <-snd_pcm_update_state process-129 0d.s3 119us : snd_pcm_stop <-xrun process-129 0d.s3 126us : snd_pcm_action <-snd_pcm_stop process-129 0d.s3 134us : snd_pcm_action_single <-snd_pcm_action process-129 0d.s3 141us : snd_pcm_pre_stop <-snd_pcm_action_single process-129 0d.s3 150us : snd_pcm_do_stop <-snd_pcm_action_single process-129 0d.s3 157us : soc_pcm_trigger <-snd_pcm_do_stop process-129 0d.s3 166us : snd_dmaengine_pcm_trigger <-soc_pcm_trigger process-129 0d.s3 175us : ep93xx_dma_terminate_all <-snd_dmaengine_pcm_trigger process-129 0d.s3 182us : preempt_count_add <-ep93xx_dma_terminate_all process-129 0d.s4 189us*: m2p_hw_shutdown <-ep93xx_dma_terminate_all process-129 0d.s4 39472us : m2p_hw_setup <-ep93xx_dma_terminate_all ... rest skipped... process-129 0d.s. 40080us : => ep93xx_dma_tasklet => tasklet_action => __do_softirq => irq_exit => __handle_domain_irq => vic_handle_irq => __irq_usr => 0xb66c6668 Just abort the transfers and warn if the HW state is not what we expect. Move draining into device_synchronize callback. Signed-off-by: Alexander Sverdlin Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul --- drivers/dma/ep93xx_dma.c | 37 +++++++++++++++++++++++++++++++++---- 1 file changed, 33 insertions(+), 4 deletions(-) diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index deb009c3121f..ec240592f5c8 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -201,6 +201,7 @@ struct ep93xx_dma_engine { struct dma_device dma_dev; bool m2m; int (*hw_setup)(struct ep93xx_dma_chan *); + void (*hw_synchronize)(struct ep93xx_dma_chan *); void (*hw_shutdown)(struct ep93xx_dma_chan *); void (*hw_submit)(struct ep93xx_dma_chan *); int (*hw_interrupt)(struct ep93xx_dma_chan *); @@ -333,21 +334,27 @@ static inline u32 m2p_channel_state(struct ep93xx_dma_chan *edmac) return (readl(edmac->regs + M2P_STATUS) >> 4) & 0x3; } -static void m2p_hw_shutdown(struct ep93xx_dma_chan *edmac) +static void m2p_hw_synchronize(struct ep93xx_dma_chan *edmac) { + unsigned long flags; u32 control; + spin_lock_irqsave(&edmac->lock, flags); control = readl(edmac->regs + M2P_CONTROL); control &= ~(M2P_CONTROL_STALLINT | M2P_CONTROL_NFBINT); m2p_set_control(edmac, control); + spin_unlock_irqrestore(&edmac->lock, flags); while (m2p_channel_state(edmac) >= M2P_STATE_ON) - cpu_relax(); + schedule(); +} +static void m2p_hw_shutdown(struct ep93xx_dma_chan *edmac) +{ m2p_set_control(edmac, 0); - while (m2p_channel_state(edmac) == M2P_STATE_STALL) - cpu_relax(); + while (m2p_channel_state(edmac) != M2P_STATE_IDLE) + dev_warn(chan2dev(edmac), "M2P: Not yet IDLE\n"); } static void m2p_fill_desc(struct ep93xx_dma_chan *edmac) @@ -1162,6 +1169,26 @@ fail: return NULL; } +/** + * ep93xx_dma_synchronize - Synchronizes the termination of transfers to the + * current context. + * @chan: channel + * + * Synchronizes the DMA channel termination to the current context. When this + * function returns it is guaranteed that all transfers for previously issued + * descriptors have stopped and and it is safe to free the memory associated + * with them. Furthermore it is guaranteed that all complete callback functions + * for a previously submitted descriptor have finished running and it is safe to + * free resources accessed from within the complete callbacks. + */ +static void ep93xx_dma_synchronize(struct dma_chan *chan) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + + if (edmac->edma->hw_synchronize) + edmac->edma->hw_synchronize(edmac); +} + /** * ep93xx_dma_terminate_all - terminate all transactions * @chan: channel @@ -1325,6 +1352,7 @@ static int __init ep93xx_dma_probe(struct platform_device *pdev) dma_dev->device_prep_slave_sg = ep93xx_dma_prep_slave_sg; dma_dev->device_prep_dma_cyclic = ep93xx_dma_prep_dma_cyclic; dma_dev->device_config = ep93xx_dma_slave_config; + dma_dev->device_synchronize = ep93xx_dma_synchronize; dma_dev->device_terminate_all = ep93xx_dma_terminate_all; dma_dev->device_issue_pending = ep93xx_dma_issue_pending; dma_dev->device_tx_status = ep93xx_dma_tx_status; @@ -1342,6 +1370,7 @@ static int __init ep93xx_dma_probe(struct platform_device *pdev) } else { dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask); + edma->hw_synchronize = m2p_hw_synchronize; edma->hw_setup = m2p_hw_setup; edma->hw_shutdown = m2p_hw_shutdown; edma->hw_submit = m2p_hw_submit; From 28232a4317be7ad615f0f1b69dc8583fd580a8e3 Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Sat, 20 May 2017 14:12:34 +0200 Subject: [PATCH 0133/1065] KVM: arm/arm64: Fix isues with GICv2 on GICv3 migration We have been a little loose with our intermediate VMCR representation where we had a 'ctlr' field, but we failed to differentiate between the GICv2 GICC_CTLR and ICC_CTLR_EL1 layouts, and therefore ended up mapping the wrong bits into the individual fields of the ICH_VMCR_EL2 when emulating a GICv2 on a GICv3 system. Fix this by using explicit fields for the VMCR bits instead. Cc: Eric Auger Reported-by: wanghaibin Signed-off-by: Christoffer Dall Reviewed-by: Marc Zyngier Tested-by: Marc Zyngier --- arch/arm64/kvm/vgic-sys-reg-v3.c | 10 +++---- include/linux/irqchip/arm-gic-v3.h | 4 +++ include/linux/irqchip/arm-gic.h | 28 ++++++++++++++++-- virt/kvm/arm/vgic/vgic-mmio-v2.c | 16 ++++++++-- virt/kvm/arm/vgic/vgic-v2.c | 28 ++++++++++++++++-- virt/kvm/arm/vgic/vgic-v3.c | 47 +++++++++++++++++++++--------- virt/kvm/arm/vgic/vgic.h | 12 +++++--- 7 files changed, 114 insertions(+), 31 deletions(-) diff --git a/arch/arm64/kvm/vgic-sys-reg-v3.c b/arch/arm64/kvm/vgic-sys-reg-v3.c index 79f37e37d367..6260b69e5622 100644 --- a/arch/arm64/kvm/vgic-sys-reg-v3.c +++ b/arch/arm64/kvm/vgic-sys-reg-v3.c @@ -65,8 +65,8 @@ static bool access_gic_ctlr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, * Here set VMCR.CTLR in ICC_CTLR_EL1 layout. * The vgic_set_vmcr() will convert to ICH_VMCR layout. */ - vmcr.ctlr = val & ICC_CTLR_EL1_CBPR_MASK; - vmcr.ctlr |= val & ICC_CTLR_EL1_EOImode_MASK; + vmcr.cbpr = (val & ICC_CTLR_EL1_CBPR_MASK) >> ICC_CTLR_EL1_CBPR_SHIFT; + vmcr.eoim = (val & ICC_CTLR_EL1_EOImode_MASK) >> ICC_CTLR_EL1_EOImode_SHIFT; vgic_set_vmcr(vcpu, &vmcr); } else { val = 0; @@ -83,8 +83,8 @@ static bool access_gic_ctlr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, * The VMCR.CTLR value is in ICC_CTLR_EL1 layout. * Extract it directly using ICC_CTLR_EL1 reg definitions. */ - val |= vmcr.ctlr & ICC_CTLR_EL1_CBPR_MASK; - val |= vmcr.ctlr & ICC_CTLR_EL1_EOImode_MASK; + val |= (vmcr.cbpr << ICC_CTLR_EL1_CBPR_SHIFT) & ICC_CTLR_EL1_CBPR_MASK; + val |= (vmcr.eoim << ICC_CTLR_EL1_EOImode_SHIFT) & ICC_CTLR_EL1_EOImode_MASK; p->regval = val; } @@ -135,7 +135,7 @@ static bool access_gic_bpr1(struct kvm_vcpu *vcpu, struct sys_reg_params *p, p->regval = 0; vgic_get_vmcr(vcpu, &vmcr); - if (!((vmcr.ctlr & ICH_VMCR_CBPR_MASK) >> ICH_VMCR_CBPR_SHIFT)) { + if (!vmcr.cbpr) { if (p->is_write) { vmcr.abpr = (p->regval & ICC_BPR1_EL1_MASK) >> ICC_BPR1_EL1_SHIFT; diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index fffb91202bc9..1fa293a37f4a 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -417,6 +417,10 @@ #define ICH_HCR_EN (1 << 0) #define ICH_HCR_UIE (1 << 1) +#define ICH_VMCR_ACK_CTL_SHIFT 2 +#define ICH_VMCR_ACK_CTL_MASK (1 << ICH_VMCR_ACK_CTL_SHIFT) +#define ICH_VMCR_FIQ_EN_SHIFT 3 +#define ICH_VMCR_FIQ_EN_MASK (1 << ICH_VMCR_FIQ_EN_SHIFT) #define ICH_VMCR_CBPR_SHIFT 4 #define ICH_VMCR_CBPR_MASK (1 << ICH_VMCR_CBPR_SHIFT) #define ICH_VMCR_EOIM_SHIFT 9 diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h index dc30f3d057eb..d3453ee072fc 100644 --- a/include/linux/irqchip/arm-gic.h +++ b/include/linux/irqchip/arm-gic.h @@ -25,7 +25,18 @@ #define GICC_ENABLE 0x1 #define GICC_INT_PRI_THRESHOLD 0xf0 -#define GIC_CPU_CTRL_EOImodeNS (1 << 9) +#define GIC_CPU_CTRL_EnableGrp0_SHIFT 0 +#define GIC_CPU_CTRL_EnableGrp0 (1 << GIC_CPU_CTRL_EnableGrp0_SHIFT) +#define GIC_CPU_CTRL_EnableGrp1_SHIFT 1 +#define GIC_CPU_CTRL_EnableGrp1 (1 << GIC_CPU_CTRL_EnableGrp1_SHIFT) +#define GIC_CPU_CTRL_AckCtl_SHIFT 2 +#define GIC_CPU_CTRL_AckCtl (1 << GIC_CPU_CTRL_AckCtl_SHIFT) +#define GIC_CPU_CTRL_FIQEn_SHIFT 3 +#define GIC_CPU_CTRL_FIQEn (1 << GIC_CPU_CTRL_FIQEn_SHIFT) +#define GIC_CPU_CTRL_CBPR_SHIFT 4 +#define GIC_CPU_CTRL_CBPR (1 << GIC_CPU_CTRL_CBPR_SHIFT) +#define GIC_CPU_CTRL_EOImodeNS_SHIFT 9 +#define GIC_CPU_CTRL_EOImodeNS (1 << GIC_CPU_CTRL_EOImodeNS_SHIFT) #define GICC_IAR_INT_ID_MASK 0x3ff #define GICC_INT_SPURIOUS 1023 @@ -84,8 +95,19 @@ #define GICH_LR_EOI (1 << 19) #define GICH_LR_HW (1 << 31) -#define GICH_VMCR_CTRL_SHIFT 0 -#define GICH_VMCR_CTRL_MASK (0x21f << GICH_VMCR_CTRL_SHIFT) +#define GICH_VMCR_ENABLE_GRP0_SHIFT 0 +#define GICH_VMCR_ENABLE_GRP0_MASK (1 << GICH_VMCR_ENABLE_GRP0_SHIFT) +#define GICH_VMCR_ENABLE_GRP1_SHIFT 1 +#define GICH_VMCR_ENABLE_GRP1_MASK (1 << GICH_VMCR_ENABLE_GRP1_SHIFT) +#define GICH_VMCR_ACK_CTL_SHIFT 2 +#define GICH_VMCR_ACK_CTL_MASK (1 << GICH_VMCR_ACK_CTL_SHIFT) +#define GICH_VMCR_FIQ_EN_SHIFT 3 +#define GICH_VMCR_FIQ_EN_MASK (1 << GICH_VMCR_FIQ_EN_SHIFT) +#define GICH_VMCR_CBPR_SHIFT 4 +#define GICH_VMCR_CBPR_MASK (1 << GICH_VMCR_CBPR_SHIFT) +#define GICH_VMCR_EOI_MODE_SHIFT 9 +#define GICH_VMCR_EOI_MODE_MASK (1 << GICH_VMCR_EOI_MODE_SHIFT) + #define GICH_VMCR_PRIMASK_SHIFT 27 #define GICH_VMCR_PRIMASK_MASK (0x1f << GICH_VMCR_PRIMASK_SHIFT) #define GICH_VMCR_BINPOINT_SHIFT 21 diff --git a/virt/kvm/arm/vgic/vgic-mmio-v2.c b/virt/kvm/arm/vgic/vgic-mmio-v2.c index 0a4283ed9aa7..63e0bbdcddcc 100644 --- a/virt/kvm/arm/vgic/vgic-mmio-v2.c +++ b/virt/kvm/arm/vgic/vgic-mmio-v2.c @@ -226,7 +226,13 @@ static unsigned long vgic_mmio_read_vcpuif(struct kvm_vcpu *vcpu, switch (addr & 0xff) { case GIC_CPU_CTRL: - val = vmcr.ctlr; + val = vmcr.grpen0 << GIC_CPU_CTRL_EnableGrp0_SHIFT; + val |= vmcr.grpen1 << GIC_CPU_CTRL_EnableGrp1_SHIFT; + val |= vmcr.ackctl << GIC_CPU_CTRL_AckCtl_SHIFT; + val |= vmcr.fiqen << GIC_CPU_CTRL_FIQEn_SHIFT; + val |= vmcr.cbpr << GIC_CPU_CTRL_CBPR_SHIFT; + val |= vmcr.eoim << GIC_CPU_CTRL_EOImodeNS_SHIFT; + break; case GIC_CPU_PRIMASK: /* @@ -267,7 +273,13 @@ static void vgic_mmio_write_vcpuif(struct kvm_vcpu *vcpu, switch (addr & 0xff) { case GIC_CPU_CTRL: - vmcr.ctlr = val; + vmcr.grpen0 = !!(val & GIC_CPU_CTRL_EnableGrp0); + vmcr.grpen1 = !!(val & GIC_CPU_CTRL_EnableGrp1); + vmcr.ackctl = !!(val & GIC_CPU_CTRL_AckCtl); + vmcr.fiqen = !!(val & GIC_CPU_CTRL_FIQEn); + vmcr.cbpr = !!(val & GIC_CPU_CTRL_CBPR); + vmcr.eoim = !!(val & GIC_CPU_CTRL_EOImodeNS); + break; case GIC_CPU_PRIMASK: /* diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c index 504b4bd0d651..e4187e52bb26 100644 --- a/virt/kvm/arm/vgic/vgic-v2.c +++ b/virt/kvm/arm/vgic/vgic-v2.c @@ -177,7 +177,18 @@ void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2; u32 vmcr; - vmcr = (vmcrp->ctlr << GICH_VMCR_CTRL_SHIFT) & GICH_VMCR_CTRL_MASK; + vmcr = (vmcrp->grpen0 << GICH_VMCR_ENABLE_GRP0_SHIFT) & + GICH_VMCR_ENABLE_GRP0_MASK; + vmcr |= (vmcrp->grpen1 << GICH_VMCR_ENABLE_GRP1_SHIFT) & + GICH_VMCR_ENABLE_GRP1_MASK; + vmcr |= (vmcrp->ackctl << GICH_VMCR_ACK_CTL_SHIFT) & + GICH_VMCR_ACK_CTL_MASK; + vmcr |= (vmcrp->fiqen << GICH_VMCR_FIQ_EN_SHIFT) & + GICH_VMCR_FIQ_EN_MASK; + vmcr |= (vmcrp->cbpr << GICH_VMCR_CBPR_SHIFT) & + GICH_VMCR_CBPR_MASK; + vmcr |= (vmcrp->eoim << GICH_VMCR_EOI_MODE_SHIFT) & + GICH_VMCR_EOI_MODE_MASK; vmcr |= (vmcrp->abpr << GICH_VMCR_ALIAS_BINPOINT_SHIFT) & GICH_VMCR_ALIAS_BINPOINT_MASK; vmcr |= (vmcrp->bpr << GICH_VMCR_BINPOINT_SHIFT) & @@ -195,8 +206,19 @@ void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) vmcr = cpu_if->vgic_vmcr; - vmcrp->ctlr = (vmcr & GICH_VMCR_CTRL_MASK) >> - GICH_VMCR_CTRL_SHIFT; + vmcrp->grpen0 = (vmcr & GICH_VMCR_ENABLE_GRP0_MASK) >> + GICH_VMCR_ENABLE_GRP0_SHIFT; + vmcrp->grpen1 = (vmcr & GICH_VMCR_ENABLE_GRP1_MASK) >> + GICH_VMCR_ENABLE_GRP1_SHIFT; + vmcrp->ackctl = (vmcr & GICH_VMCR_ACK_CTL_MASK) >> + GICH_VMCR_ACK_CTL_SHIFT; + vmcrp->fiqen = (vmcr & GICH_VMCR_FIQ_EN_MASK) >> + GICH_VMCR_FIQ_EN_SHIFT; + vmcrp->cbpr = (vmcr & GICH_VMCR_CBPR_MASK) >> + GICH_VMCR_CBPR_SHIFT; + vmcrp->eoim = (vmcr & GICH_VMCR_EOI_MODE_MASK) >> + GICH_VMCR_EOI_MODE_SHIFT; + vmcrp->abpr = (vmcr & GICH_VMCR_ALIAS_BINPOINT_MASK) >> GICH_VMCR_ALIAS_BINPOINT_SHIFT; vmcrp->bpr = (vmcr & GICH_VMCR_BINPOINT_MASK) >> diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c index 6fe3f003636a..030248e669f6 100644 --- a/virt/kvm/arm/vgic/vgic-v3.c +++ b/virt/kvm/arm/vgic/vgic-v3.c @@ -159,15 +159,24 @@ void vgic_v3_clear_lr(struct kvm_vcpu *vcpu, int lr) void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) { struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3; + u32 model = vcpu->kvm->arch.vgic.vgic_model; u32 vmcr; - /* - * Ignore the FIQen bit, because GIC emulation always implies - * SRE=1 which means the vFIQEn bit is also RES1. - */ - vmcr = ((vmcrp->ctlr >> ICC_CTLR_EL1_EOImode_SHIFT) << - ICH_VMCR_EOIM_SHIFT) & ICH_VMCR_EOIM_MASK; - vmcr |= (vmcrp->ctlr << ICH_VMCR_CBPR_SHIFT) & ICH_VMCR_CBPR_MASK; + if (model == KVM_DEV_TYPE_ARM_VGIC_V2) { + vmcr = (vmcrp->ackctl << ICH_VMCR_ACK_CTL_SHIFT) & + ICH_VMCR_ACK_CTL_MASK; + vmcr |= (vmcrp->fiqen << ICH_VMCR_FIQ_EN_SHIFT) & + ICH_VMCR_FIQ_EN_MASK; + } else { + /* + * When emulating GICv3 on GICv3 with SRE=1 on the + * VFIQEn bit is RES1 and the VAckCtl bit is RES0. + */ + vmcr = ICH_VMCR_FIQ_EN_MASK; + } + + vmcr |= (vmcrp->cbpr << ICH_VMCR_CBPR_SHIFT) & ICH_VMCR_CBPR_MASK; + vmcr |= (vmcrp->eoim << ICH_VMCR_EOIM_SHIFT) & ICH_VMCR_EOIM_MASK; vmcr |= (vmcrp->abpr << ICH_VMCR_BPR1_SHIFT) & ICH_VMCR_BPR1_MASK; vmcr |= (vmcrp->bpr << ICH_VMCR_BPR0_SHIFT) & ICH_VMCR_BPR0_MASK; vmcr |= (vmcrp->pmr << ICH_VMCR_PMR_SHIFT) & ICH_VMCR_PMR_MASK; @@ -180,17 +189,27 @@ void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) { struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3; + u32 model = vcpu->kvm->arch.vgic.vgic_model; u32 vmcr; vmcr = cpu_if->vgic_vmcr; - /* - * Ignore the FIQen bit, because GIC emulation always implies - * SRE=1 which means the vFIQEn bit is also RES1. - */ - vmcrp->ctlr = ((vmcr >> ICH_VMCR_EOIM_SHIFT) << - ICC_CTLR_EL1_EOImode_SHIFT) & ICC_CTLR_EL1_EOImode_MASK; - vmcrp->ctlr |= (vmcr & ICH_VMCR_CBPR_MASK) >> ICH_VMCR_CBPR_SHIFT; + if (model == KVM_DEV_TYPE_ARM_VGIC_V2) { + vmcrp->ackctl = (vmcr & ICH_VMCR_ACK_CTL_MASK) >> + ICH_VMCR_ACK_CTL_SHIFT; + vmcrp->fiqen = (vmcr & ICH_VMCR_FIQ_EN_MASK) >> + ICH_VMCR_FIQ_EN_SHIFT; + } else { + /* + * When emulating GICv3 on GICv3 with SRE=1 on the + * VFIQEn bit is RES1 and the VAckCtl bit is RES0. + */ + vmcrp->fiqen = 1; + vmcrp->ackctl = 0; + } + + vmcrp->cbpr = (vmcr & ICH_VMCR_CBPR_MASK) >> ICH_VMCR_CBPR_SHIFT; + vmcrp->eoim = (vmcr & ICH_VMCR_EOIM_MASK) >> ICH_VMCR_EOIM_SHIFT; vmcrp->abpr = (vmcr & ICH_VMCR_BPR1_MASK) >> ICH_VMCR_BPR1_SHIFT; vmcrp->bpr = (vmcr & ICH_VMCR_BPR0_MASK) >> ICH_VMCR_BPR0_SHIFT; vmcrp->pmr = (vmcr & ICH_VMCR_PMR_MASK) >> ICH_VMCR_PMR_SHIFT; diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h index da83e4caa272..bba7fa22a7f7 100644 --- a/virt/kvm/arm/vgic/vgic.h +++ b/virt/kvm/arm/vgic/vgic.h @@ -111,14 +111,18 @@ static inline bool irq_is_pending(struct vgic_irq *irq) * registers regardless of the hardware backed GIC used. */ struct vgic_vmcr { - u32 ctlr; + u32 grpen0; + u32 grpen1; + + u32 ackctl; + u32 fiqen; + u32 cbpr; + u32 eoim; + u32 abpr; u32 bpr; u32 pmr; /* Priority mask field in the GICC_PMR and * ICC_PMR_EL1 priority field format */ - /* Below member variable are valid only for GICv3 */ - u32 grpen0; - u32 grpen1; }; struct vgic_reg_attr { From 4497a224f759cd8350e07382307b55f870ef0df2 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Sat, 8 Apr 2017 02:18:40 -0500 Subject: [PATCH 0134/1065] reset: hi6220: Set module license so that it can be loaded The hi6220_reset driver can be built as a standalone module yet it cannot be loaded because it depends on GPL exported symbols. Lets set the module license so that the module loads, and things like the on-board kirin drm starts working. Signed-off-by: Jeremy Linton Reviewed-by: Xinliang Liu Signed-off-by: Philipp Zabel --- drivers/reset/hisilicon/hi6220_reset.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c index 35ce53edabf9..d5e5229308f2 100644 --- a/drivers/reset/hisilicon/hi6220_reset.c +++ b/drivers/reset/hisilicon/hi6220_reset.c @@ -155,3 +155,5 @@ static int __init hi6220_reset_init(void) } postcore_initcall(hi6220_reset_init); + +MODULE_LICENSE("GPL v2"); From fefa92679dbe0c613e62b6c27235dcfbe9640ad1 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sun, 21 May 2017 07:22:49 +0800 Subject: [PATCH 0135/1065] netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize If nf_conntrack_htable_size was adjusted by the user during the ct dump operation, we may invoke nf_ct_put twice for the same ct, i.e. the "last" ct. This will cause the ct will be freed but still linked in hash buckets. It's very easy to reproduce the problem by the following commands: # while : ; do echo $RANDOM > /proc/sys/net/netfilter/nf_conntrack_buckets done # while : ; do conntrack -L done # iperf -s 127.0.0.1 & # iperf -c 127.0.0.1 -P 60 -t 36000 After a while, the system will hang like this: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [bash:20184] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [iperf:20382] ... So at last if we find cb->args[1] is equal to "last", this means hash resize happened, then we can set cb->args[1] to 0 to fix the above issue. Fixes: d205dc40798d ("[NETFILTER]: ctnetlink: fix deadlock in table dumping") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_netlink.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 9799a50bc604..a8be9b72e6cd 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -890,8 +890,13 @@ restart: } out: local_bh_enable(); - if (last) + if (last) { + /* nf ct hash resize happened, now clear the leftover. */ + if ((struct nf_conn *)cb->args[1] == last) + cb->args[1] = 0; + nf_ct_put(last); + } while (i) { i--; From 0f0b9b63e14fc3f66e4d342df016c9b071c5abed Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 2 May 2017 13:14:13 +0200 Subject: [PATCH 0136/1065] gfs2: Make flush bios explicitely sync Commit b685d3d65ac7 "block: treat REQ_FUA and REQ_PREFLUSH as synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...} definitions. generic_make_request_checks() however strips REQ_FUA and REQ_PREFLUSH flags from a bio when the storage doesn't report volatile write cache and thus write effectively becomes asynchronous which can lead to performance regressions Fix the problem by making sure all bios which are synchronous are properly marked with REQ_SYNC. Fixes: b685d3d65ac791406e0dfd8779cc9b3707fea5a3 CC: Steven Whitehouse CC: cluster-devel@redhat.com CC: stable@vger.kernel.org Acked-by: Bob Peterson Signed-off-by: Jan Kara --- fs/gfs2/log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index f865b96374df..d2955daf17a4 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -659,7 +659,7 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags) struct gfs2_log_header *lh; unsigned int tail; u32 hash; - int op_flags = REQ_PREFLUSH | REQ_FUA | REQ_META; + int op_flags = REQ_PREFLUSH | REQ_FUA | REQ_META | REQ_SYNC; struct page *page = mempool_alloc(gfs2_page_pool, GFP_NOIO); enum gfs2_freeze_state state = atomic_read(&sdp->sd_freeze_state); lh = page_address(page); From d8747d642ec4ce96adf17ae35652a5e4015cfe02 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 2 May 2017 13:16:18 +0200 Subject: [PATCH 0137/1065] reiserfs: Make flush bios explicitely sync Commit b685d3d65ac7 "block: treat REQ_FUA and REQ_PREFLUSH as synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...} definitions. generic_make_request_checks() however strips REQ_FUA and REQ_PREFLUSH flags from a bio when the storage doesn't report volatile write cache and thus write effectively becomes asynchronous which can lead to performance regressions Fix the problem by making sure all bios which are synchronous are properly marked with REQ_SYNC. Fixes: b685d3d65ac791406e0dfd8779cc9b3707fea5a3 CC: reiserfs-devel@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Jan Kara --- fs/reiserfs/journal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index da01f497180a..39bb1e838d8d 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -1112,7 +1112,7 @@ static int flush_commit_list(struct super_block *s, depth = reiserfs_write_unlock_nested(s); if (reiserfs_barrier_flush(s)) __sync_dirty_buffer(jl->j_commit_bh, - REQ_PREFLUSH | REQ_FUA); + REQ_SYNC | REQ_PREFLUSH | REQ_FUA); else sync_dirty_buffer(jl->j_commit_bh); reiserfs_write_lock_nested(s, depth); @@ -1271,7 +1271,7 @@ static int _update_journal_header_block(struct super_block *sb, if (reiserfs_barrier_flush(sb)) __sync_dirty_buffer(journal->j_header_bh, - REQ_PREFLUSH | REQ_FUA); + REQ_SYNC | REQ_PREFLUSH | REQ_FUA); else sync_dirty_buffer(journal->j_header_bh); From 6d3b5d8d8dd1c14f991ccab84b40f8425f1ae91b Mon Sep 17 00:00:00 2001 From: Olga Kornievskaia Date: Tue, 16 May 2017 12:00:15 -0400 Subject: [PATCH 0138/1065] NFS fix COMMIT after COPY Fix a typo in the commit e092693443b995c8e3a565a73b5fdb05f1260f9b "NFS append COMMIT after synchronous COPY" Reported-by: Eryu Guan Fixes: e092693443b ("NFS append COMMIT after synchronous COPY") Signed-off-by: Olga Kornievskaia Tested-by: Eryu Guan Signed-off-by: Trond Myklebust --- fs/nfs/nfs42proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c index 929d09a5310a..319a47db218d 100644 --- a/fs/nfs/nfs42proc.c +++ b/fs/nfs/nfs42proc.c @@ -177,7 +177,7 @@ static ssize_t _nfs42_proc_copy(struct file *src, if (status) goto out; - if (!nfs_write_verifier_cmp(&res->write_res.verifier.verifier, + if (nfs_write_verifier_cmp(&res->write_res.verifier.verifier, &res->commit_res.verf->verifier)) { status = -EAGAIN; goto out; From 662f9a105b4322b8559d448f86110e6ec24b8738 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 20 May 2017 00:31:12 +0300 Subject: [PATCH 0139/1065] pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() If xdr_inline_decode() fails then we end up returning ERR_PTR(0). The caller treats NULL returns as -ENOMEM so it doesn't really hurt runtime, but obviously we intended to set an error code here. Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by: Dan Carpenter Signed-off-by: Trond Myklebust --- fs/nfs/flexfilelayout/flexfilelayout.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c index f5714ee01000..23542dc44a25 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.c +++ b/fs/nfs/flexfilelayout/flexfilelayout.c @@ -454,6 +454,7 @@ ff_layout_alloc_lseg(struct pnfs_layout_hdr *lh, goto out_err_free; /* fh */ + rc = -EIO; p = xdr_inline_decode(&stream, 4); if (!p) goto out_err_free; From d2c23c0075d7091bf749411bd2ee757cf4ec356c Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Mon, 22 May 2017 22:18:28 +0200 Subject: [PATCH 0140/1065] xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring Reviewed-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/xprtrdma/backchannel.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/sunrpc/xprtrdma/backchannel.c b/net/sunrpc/xprtrdma/backchannel.c index 24fedd4b117e..03f6b5840764 100644 --- a/net/sunrpc/xprtrdma/backchannel.c +++ b/net/sunrpc/xprtrdma/backchannel.c @@ -119,11 +119,9 @@ int xprt_rdma_bc_setup(struct rpc_xprt *xprt, unsigned int reqs) for (i = 0; i < (reqs << 1); i++) { rqst = kzalloc(sizeof(*rqst), GFP_KERNEL); - if (!rqst) { - pr_err("RPC: %s: Failed to create bc rpc_rqst\n", - __func__); + if (!rqst) goto out_free; - } + dprintk("RPC: %s: new rqst %p\n", __func__, rqst); rqst->rq_xprt = &r_xprt->rx_xprt; From 08cb5b0f058a325fcb5305e33f572ff6d6dfa289 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Mon, 22 May 2017 20:20:23 -0400 Subject: [PATCH 0141/1065] pnfs: Fix the check for requests in range of layout segment It's possible and acceptable for NFS to attempt to add requests beyond the range of the current pgio->pg_lseg, a case which should be caught and limited by the pg_test operation. However, the current handling of this case replaces pgio->pg_lseg with a new layout segment (after a WARN) within that pg_test operation. That will cause all the previously added requests to be submitted with this new layout segment, which may not be valid for those requests. Fix this problem by only returning zero for the number of bytes to coalesce from pg_test for this case which allows any previously added requests to complete on the current layout segment. The check for requests starting out of range of the layout segment moves to pg_init, so that the replacement of pgio->pg_lseg will be done when the next request is added. Signed-off-by: Benjamin Coddington Signed-off-by: Trond Myklebust --- fs/nfs/pnfs.c | 25 +++++++++++++++++-------- fs/nfs/pnfs.h | 10 ++++++++++ 2 files changed, 27 insertions(+), 8 deletions(-) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index adc6ec28d4b5..c383d0913b54 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -2094,12 +2094,26 @@ pnfs_generic_pg_check_layout(struct nfs_pageio_descriptor *pgio) } EXPORT_SYMBOL_GPL(pnfs_generic_pg_check_layout); +/* + * Check for any intersection between the request and the pgio->pg_lseg, + * and if none, put this pgio->pg_lseg away. + */ +static void +pnfs_generic_pg_check_range(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) +{ + if (pgio->pg_lseg && !pnfs_lseg_request_intersecting(pgio->pg_lseg, req)) { + pnfs_put_lseg(pgio->pg_lseg); + pgio->pg_lseg = NULL; + } +} + void pnfs_generic_pg_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) { u64 rd_size = req->wb_bytes; pnfs_generic_pg_check_layout(pgio); + pnfs_generic_pg_check_range(pgio, req); if (pgio->pg_lseg == NULL) { if (pgio->pg_dreq == NULL) rd_size = i_size_read(pgio->pg_inode) - req_offset(req); @@ -2131,6 +2145,7 @@ pnfs_generic_pg_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req, u64 wb_size) { pnfs_generic_pg_check_layout(pgio); + pnfs_generic_pg_check_range(pgio, req); if (pgio->pg_lseg == NULL) { pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode, req->wb_context, @@ -2191,16 +2206,10 @@ pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, seg_end = pnfs_end_offset(pgio->pg_lseg->pls_range.offset, pgio->pg_lseg->pls_range.length); req_start = req_offset(req); - WARN_ON_ONCE(req_start >= seg_end); + /* start of request is past the last byte of this segment */ - if (req_start >= seg_end) { - /* reference the new lseg */ - if (pgio->pg_ops->pg_cleanup) - pgio->pg_ops->pg_cleanup(pgio); - if (pgio->pg_ops->pg_init) - pgio->pg_ops->pg_init(pgio, req); + if (req_start >= seg_end) return 0; - } /* adjust 'size' iff there are fewer bytes left in the * segment than what nfs_generic_pg_test returned */ diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 2d05b756a8d6..99731e3e332f 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -593,6 +593,16 @@ pnfs_lseg_range_intersecting(const struct pnfs_layout_range *l1, return pnfs_is_range_intersecting(l1->offset, end1, l2->offset, end2); } +static inline bool +pnfs_lseg_request_intersecting(struct pnfs_layout_segment *lseg, struct nfs_page *req) +{ + u64 seg_last = pnfs_end_offset(lseg->pls_range.offset, lseg->pls_range.length); + u64 req_last = req_offset(req) + req->wb_bytes; + + return pnfs_is_range_intersecting(lseg->pls_range.offset, seg_last, + req_offset(req), req_last); +} + extern unsigned int layoutstats_timer; #ifdef NFS_DEBUG From b49c15f97c936ef5a536821f97e4dd8568369802 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 24 May 2017 07:55:44 -0400 Subject: [PATCH 0142/1065] NFSv4.0: Fix a lock leak in nfs40_walk_client_list Xiaolong Ye's kernel test robot detected the following Oops: [ 299.158991] BUG: scheduling while atomic: mount.nfs/9387/0x00000002 [ 299.169587] 2 locks held by mount.nfs/9387: [ 299.176165] #0: (nfs_clid_init_mutex){......}, at: [] nfs4_discover_server_trunking+0x47/0x1fc [ 299.201802] #1: (&(&nn->nfs_client_lock)->rlock){......}, at: [] nfs40_walk_client_list+0x2e9/0x338 [ 299.221979] CPU: 0 PID: 9387 Comm: mount.nfs Not tainted 4.11.0-rc7-00021-g14d1bbb #45 [ 299.235584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 299.251176] Call Trace: [ 299.255192] dump_stack+0x61/0x7e [ 299.260416] __schedule_bug+0x65/0x74 [ 299.266208] __schedule+0x5d/0x87c [ 299.271883] schedule+0x89/0x9a [ 299.276937] schedule_timeout+0x232/0x289 [ 299.283223] ? detach_if_pending+0x10b/0x10b [ 299.289935] schedule_timeout_uninterruptible+0x2a/0x2c [ 299.298266] ? put_rpccred+0x3e/0x115 [ 299.304327] ? schedule_timeout_uninterruptible+0x2a/0x2c [ 299.312851] msleep+0x1e/0x22 [ 299.317612] nfs4_discover_server_trunking+0x102/0x1fc [ 299.325644] nfs4_init_client+0x13f/0x194 It looks as if we recently added a spin_lock() leak to nfs40_walk_client_list() when cleaning up the code. Reported-by: kernel test robot Fixes: 14d1bbb0ca42 ("NFS: Create a common nfs4_match_client() function") Cc: Anna Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/nfs4client.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index 692a7a8bfc7a..66776f022111 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -582,7 +582,6 @@ int nfs40_walk_client_list(struct nfs_client *new, */ nfs4_schedule_path_down_recovery(pos); default: - spin_lock(&nn->nfs_client_lock); goto out; } From d38162e4b5c643733792f32be4ea107c831827b4 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 17 May 2017 15:15:57 +0200 Subject: [PATCH 0143/1065] Revert "drm/i915: Restore lost "Initialized i915" welcome message" This reverts commit bc5ca47c0af4f949ba889e666b7da65569e36093. Gabriel put this back into generic code with commit 75f6dfe3e652e1adef8cc1b073c89f3e22103a8f Author: Gabriel Krisman Bertazi Date: Wed Dec 28 12:32:11 2016 -0200 drm: Deduplicate driver initialization message but somehow he missed Chris' patch to add the message meanwhile. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101025 Fixes: 75f6dfe3e652 ("drm: Deduplicate driver initialization message") Cc: Gabriel Krisman Bertazi Cc: Daniel Vetter Cc: Jani Nikula Cc: Chris Wilson Cc: # v4.11+ Reviewed-by: Gabriel Krisman Bertazi Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170517131557.7836-1-daniel.vetter@ffwll.ch (cherry picked from commit 6bdba81979b2c3c8fed0be62ca31c32c3129d85f) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 3036d4835b0f..c994fe6e65b2 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1272,10 +1272,6 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent) dev_priv->ipc_enabled = false; - /* Everything is in place, we can now relax! */ - DRM_INFO("Initialized %s %d.%d.%d %s for %s on minor %d\n", - driver.name, driver.major, driver.minor, driver.patchlevel, - driver.date, pci_name(pdev), dev_priv->drm.primary->index); if (IS_ENABLED(CONFIG_DRM_I915_DEBUG)) DRM_INFO("DRM_I915_DEBUG enabled\n"); if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)) From 2e0bb5b38f32eb21fe25e845721a205370adeffe Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 23 May 2017 20:44:12 +0100 Subject: [PATCH 0144/1065] drm/i915/selftests: Silence compiler warning in igt_ctx_exec The compiler doesn't always spot the guard that object is allocated on the first pass, leading to: drivers/gpu/drm/i915/selftests/i915_gem_context.c: warning: 'obj' may be used uninitialized in this function [-Wuninitialized]: => 370:8 v2: Make it more obvious by setting obj to NULL on the first pass and any later pass where we need to reallocate. Reported-by: Geert Uytterhoeven Fixes: 791ff39ae32a ("drm/i915: Live testing for context execution") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Tvrtko Ursulin Cc: Matthew Auld c: # v4.12-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20170523194412.1195-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin (cherry picked from commit ca83d5840cb641b2efb04db0b70fa56955dd1453) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/selftests/i915_gem_context.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/selftests/i915_gem_context.c b/drivers/gpu/drm/i915/selftests/i915_gem_context.c index 1afb8b06e3e1..12b85b3278cd 100644 --- a/drivers/gpu/drm/i915/selftests/i915_gem_context.c +++ b/drivers/gpu/drm/i915/selftests/i915_gem_context.c @@ -320,7 +320,7 @@ static unsigned long max_dwords(struct drm_i915_gem_object *obj) static int igt_ctx_exec(void *arg) { struct drm_i915_private *i915 = arg; - struct drm_i915_gem_object *obj; + struct drm_i915_gem_object *obj = NULL; struct drm_file *file; IGT_TIMEOUT(end_time); LIST_HEAD(objects); @@ -359,7 +359,7 @@ static int igt_ctx_exec(void *arg) } for_each_engine(engine, i915, id) { - if (dw == 0) { + if (!obj) { obj = create_test_object(ctx, file, &objects); if (IS_ERR(obj)) { err = PTR_ERR(obj); @@ -376,8 +376,10 @@ static int igt_ctx_exec(void *arg) goto out_unlock; } - if (++dw == max_dwords(obj)) + if (++dw == max_dwords(obj)) { + obj = NULL; dw = 0; + } ndwords++; } ncontexts++; From 3e4240da0e3673637c1c995bdd14cfdbc8f4dc4c Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 24 May 2017 01:39:35 +0200 Subject: [PATCH 0145/1065] Revert "ata: sata_mv: Convert to devm_ioremap_resource()" This reverts commit 368e5fbdfc60732643f34f538823ed4bc8829827. devm_ioremap_resource() enforces that there are no overlapping resources, where as devm_ioremap() does not. The sata phy driver needs a subset of the sata IO address space, so maps some of the sata address space. As a result, sata_mv now fails to probe, reporting it cannot get its resources, and so we don't have any SATA disks. Signed-off-by: Andrew Lunn Acked-by: Gregory CLEMENT Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Tejun Heo --- drivers/ata/sata_mv.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index b66bcda88320..3b2246dded74 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4067,7 +4067,6 @@ static int mv_platform_probe(struct platform_device *pdev) struct ata_host *host; struct mv_host_priv *hpriv; struct resource *res; - void __iomem *mmio; int n_ports = 0, irq = 0; int rc; int port; @@ -4086,9 +4085,8 @@ static int mv_platform_probe(struct platform_device *pdev) * Get the register base first */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mmio = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(mmio)) - return PTR_ERR(mmio); + if (res == NULL) + return -EINVAL; /* allocate host */ if (pdev->dev.of_node) { @@ -4132,7 +4130,12 @@ static int mv_platform_probe(struct platform_device *pdev) hpriv->board_idx = chip_soc; host->iomap = NULL; - hpriv->base = mmio - SATAHC0_REG_BASE; + hpriv->base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!hpriv->base) + return -ENOMEM; + + hpriv->base -= SATAHC0_REG_BASE; hpriv->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(hpriv->clk)) From 44f73dc42c11398d7b84e94365a485ebd6420798 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Wed, 24 May 2017 16:10:32 +0200 Subject: [PATCH 0146/1065] arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes The cryptographic engine nodes have an interrupt which is configured as both edge and level, which makes no sense at all. Fix this by configuring it the right way (level). Signed-off-by: Antoine Tenart Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 3 +-- arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index ac8df5201cd6..b4bc42ece754 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -231,8 +231,7 @@ cpm_crypto: crypto@800000 { compatible = "inside-secure,safexcel-eip197"; reg = <0x800000 0x200000>; - interrupts = , + interrupts = , , , , diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 7740a75a8230..6e2058847ddc 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -221,8 +221,7 @@ cps_crypto: crypto@800000 { compatible = "inside-secure,safexcel-eip197"; reg = <0x800000 0x200000>; - interrupts = , + interrupts = , , , , From 41c25707d21716826e3c1f60967f5550610ec1c9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 May 2017 12:03:48 -0400 Subject: [PATCH 0147/1065] cpuset: consider dying css as offline In most cases, a cgroup controller don't care about the liftimes of cgroups. For the controller, a css becomes online when ->css_online() is called on it and offline when ->css_offline() is called. However, cpuset is special in that the user interface it exposes cares whether certain cgroups exist or not. Combined with the RCU delay between cgroup removal and css offlining, this can lead to user visible behavior oddities where operations which should succeed after cgroup removals fail for some time period. The effects of cgroup removals are delayed when seen from userland. This patch adds css_is_dying() which tests whether offline is pending and updates is_cpuset_online() so that the function returns false also while offline is pending. This gets rid of the userland visible delays. Signed-off-by: Tejun Heo Reported-by: Daniel Jordan Link: http://lkml.kernel.org/r/327ca1f5-7957-fbb9-9e5f-9ba149d40ba2@oracle.com Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- include/linux/cgroup.h | 20 ++++++++++++++++++++ kernel/cgroup/cpuset.c | 4 ++-- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index ed2573e149fa..710a005c6b7a 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -343,6 +343,26 @@ static inline bool css_tryget_online(struct cgroup_subsys_state *css) return true; } +/** + * css_is_dying - test whether the specified css is dying + * @css: target css + * + * Test whether @css is in the process of offlining or already offline. In + * most cases, ->css_online() and ->css_offline() callbacks should be + * enough; however, the actual offline operations are RCU delayed and this + * test returns %true also when @css is scheduled to be offlined. + * + * This is useful, for example, when the use case requires synchronous + * behavior with respect to cgroup removal. cgroup removal schedules css + * offlining but the css can seem alive while the operation is being + * delayed. If the delay affects user visible semantics, this test can be + * used to resolve the situation. + */ +static inline bool css_is_dying(struct cgroup_subsys_state *css) +{ + return !(css->flags & CSS_NO_REF) && percpu_ref_is_dying(&css->refcnt); +} + /** * css_put - put a css reference * @css: target css diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c index f6501f4f6040..ae643412948a 100644 --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -176,9 +176,9 @@ typedef enum { } cpuset_flagbits_t; /* convenient tests for these bits */ -static inline bool is_cpuset_online(const struct cpuset *cs) +static inline bool is_cpuset_online(struct cpuset *cs) { - return test_bit(CS_ONLINE, &cs->flags); + return test_bit(CS_ONLINE, &cs->flags) && !css_is_dying(&cs->css); } static inline int is_cpu_exclusive(const struct cpuset *cs) From 4efda5f2130da033aeedc5b3205569893b910de2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 24 May 2017 10:19:45 +0200 Subject: [PATCH 0148/1065] ASoC: Fix use-after-free at card unregistration soc_cleanup_card_resources() call snd_card_free() at the last of its procedure. This turned out to lead to a use-after-free. PCM runtimes have been already removed via soc_remove_pcm_runtimes(), while it's dereferenced later in soc_pcm_free() called via snd_card_free(). The fix is simple: just move the snd_card_free() call to the beginning of the whole procedure. This also gives another benefit: it guarantees that all operations have been shut down before actually releasing the resources, which was racy until now. Reported-and-tested-by: Robert Jarzmik Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown Cc: --- sound/soc/soc-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index aae099c0e502..754e3ef8d7ae 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2286,6 +2286,9 @@ static int soc_cleanup_card_resources(struct snd_soc_card *card) list_for_each_entry(rtd, &card->rtd_list, list) flush_delayed_work(&rtd->delayed_work); + /* free the ALSA card at first; this syncs with pending operations */ + snd_card_free(card->snd_card); + /* remove and free each DAI */ soc_remove_dai_links(card); soc_remove_pcm_runtimes(card); @@ -2300,9 +2303,7 @@ static int soc_cleanup_card_resources(struct snd_soc_card *card) if (card->remove) card->remove(card); - snd_card_free(card->snd_card); return 0; - } /* removes a socdev */ From 3a1672bb0186e940fc8521d19069f57690e850c2 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 24 May 2017 11:01:32 +0100 Subject: [PATCH 0149/1065] MAINTAINERS: Update email address for patches to Wolfson parts A somewhat overdue update of the address for sending patches on Wolfson parts to since our acquision a couple of years ago by Cirrus Logic. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index f7d568b8f133..517829e3bd1d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13858,7 +13858,7 @@ S: Odd fixes F: drivers/net/wireless/wl3501* WOLFSON MICROELECTRONICS DRIVERS -L: patches@opensource.wolfsonmicro.com +L: patches@opensource.cirrus.com T: git https://github.com/CirrusLogic/linux-drivers.git W: https://github.com/CirrusLogic/linux-drivers/wiki S: Supported From 7819a942de7b993771bd9377babc80485fe7606b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 24 May 2017 01:17:10 +0000 Subject: [PATCH 0150/1065] ASoC: rsnd: SSI PIO adjust to 24bit mode commit 90431eb49bff ("ASoC: rsnd: don't use PDTA bit for 24bit on SSI") fixups 24bit mode data alignment, but PIO was not cared. This patch fixes PIO mode 24bit data alignment Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/ssi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index c224695c1484..91e5c07911b4 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -550,6 +550,13 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); u32 *buf = (u32 *)(runtime->dma_area + rsnd_dai_pointer_offset(io, 0)); + int shift = 0; + + switch (runtime->sample_bits) { + case 32: + shift = 8; + break; + } /* * 8/16/32 data can be assesse to TDR/RDR register @@ -557,9 +564,9 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, * see rsnd_ssi_init() */ if (rsnd_io_is_play(io)) - rsnd_mod_write(mod, SSITDR, *buf); + rsnd_mod_write(mod, SSITDR, (*buf) << shift); else - *buf = rsnd_mod_read(mod, SSIRDR); + *buf = (rsnd_mod_read(mod, SSIRDR) >> shift); elapsed = rsnd_dai_pointer_update(io, sizeof(*buf)); } From 5cd1f5c32132101955d7f0e1955249a84f9b6fd9 Mon Sep 17 00:00:00 2001 From: Pardha Saradhi K Date: Mon, 15 May 2017 19:44:29 +0530 Subject: [PATCH 0151/1065] ASoC: Intel: Skylake: Fix IPC rx_list corruption In SKL+ platforms, all IPC commands are serialised, i.e. the driver sends a new IPC to DSP, only after receiving a reply from the firmware for the current IPC. Hence it seems apparent that there is only a single modifier of the IPC RX List. However, during an IPC timeout case in a multithreaded environment, there is a possibility of the list element being deleted two times if not properly protected. So, use spin lock save/restore to prevent rx_list corruption. Signed-off-by: Pardha Saradhi K Signed-off-by: Subhransu S. Prusty Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst-ipc.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c index 58c525096a7c..498b15345b1a 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.c +++ b/sound/soc/intel/skylake/skl-sst-ipc.c @@ -413,8 +413,11 @@ static void skl_ipc_process_reply(struct sst_generic_ipc *ipc, u32 reply = header.primary & IPC_GLB_REPLY_STATUS_MASK; u64 *ipc_header = (u64 *)(&header); struct skl_sst *skl = container_of(ipc, struct skl_sst, ipc); + unsigned long flags; + spin_lock_irqsave(&ipc->dsp->spinlock, flags); msg = skl_ipc_reply_get_msg(ipc, *ipc_header); + spin_unlock_irqrestore(&ipc->dsp->spinlock, flags); if (msg == NULL) { dev_dbg(ipc->dev, "ipc: rx list is empty\n"); return; @@ -456,8 +459,10 @@ static void skl_ipc_process_reply(struct sst_generic_ipc *ipc, } } + spin_lock_irqsave(&ipc->dsp->spinlock, flags); list_del(&msg->list); sst_ipc_tx_msg_reply_complete(ipc, msg); + spin_unlock_irqrestore(&ipc->dsp->spinlock, flags); } irqreturn_t skl_dsp_irq_thread_handler(int irq, void *context) From 0a716776914ed9d7ca90b48041e6767693bfb672 Mon Sep 17 00:00:00 2001 From: Shreyas NC Date: Mon, 15 May 2017 19:44:30 +0530 Subject: [PATCH 0152/1065] ASoC: Intel: Skylake: Fix to parse consecutive string tkns in manifest Element size in the manifest should be updated for each token, so that the loop can parse all the string elements in the manifest. This was not happening when more than two string elements appear consecutively, as it is not updated with correct string element size. Fixed with this patch. Signed-off-by: Shreyas NC Signed-off-by: Subhransu S. Prusty Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 3a99712e44a8..64a0f8ed33e1 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -2502,7 +2502,7 @@ static int skl_tplg_get_manifest_tkn(struct device *dev, if (ret < 0) return ret; - tkn_count += ret; + tkn_count = ret; tuple_size += tkn_count * sizeof(struct snd_soc_tplg_vendor_string_elem); From ddff7ed45edce4a4c92949d3c61cd25d229c4a14 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 23 May 2017 16:50:47 +0200 Subject: [PATCH 0153/1065] scsi: qla2xxx: don't disable a not previously enabled PCI device When pci_enable_device() or pci_enable_device_mem() fail in qla2x00_probe_one() we bail out but do a call to pci_disable_device(). This causes the dev_WARN_ON() in pci_disable_device() to trigger, as the device wasn't enabled previously. So instead of taking the 'probe_out' error path we can directly return *iff* one of the pci_enable_device() calls fails. Additionally rename the 'probe_out' goto label's name to the more descriptive 'disable_device'. Signed-off-by: Johannes Thumshirn Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Cc: Reviewed-by: Bart Van Assche Reviewed-by: Giridhar Malavali Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 1c7957903283..af25d8afd42a 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2623,10 +2623,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) if (mem_only) { if (pci_enable_device_mem(pdev)) - goto probe_out; + return ret; } else { if (pci_enable_device(pdev)) - goto probe_out; + return ret; } /* This may fail but that's ok */ @@ -2636,7 +2636,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) if (!ha) { ql_log_pci(ql_log_fatal, pdev, 0x0009, "Unable to allocate memory for ha.\n"); - goto probe_out; + goto disable_device; } ql_dbg_pci(ql_dbg_init, pdev, 0x000a, "Memory allocated for ha=%p.\n", ha); @@ -3254,7 +3254,7 @@ iospace_config_failed: pci_release_selected_regions(ha->pdev, ha->bars); kfree(ha); -probe_out: +disable_device: pci_disable_device(pdev); return ret; } From c2dd893a3b0772d1c680e109b9d5715d7f73022b Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Wed, 24 May 2017 14:09:44 +0200 Subject: [PATCH 0154/1065] scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats() If multiple tasks attempt to read the stats, it may happen that the start_req_done completion is re-initialized while still being used by another task, causing a list corruption. This patch fixes the bug by adding a mutex to serialize the calls to bnx2fc_get_host_stats(). WARNING: at lib/list_debug.c:48 list_del+0x6e/0xa0() (Not tainted) Hardware name: PowerEdge R820 list_del corruption. prev->next should be ffff882035627d90, but was ffff884069541588 Pid: 40267, comm: perl Not tainted 2.6.32-642.3.1.el6.x86_64 #1 Call Trace: [] ? warn_slowpath_common+0x91/0xe0 [] ? warn_slowpath_fmt+0x46/0x60 [] ? list_del+0x6e/0xa0 [] ? wait_for_common+0x14d/0x180 [] ? default_wake_function+0x0/0x20 [] ? wait_for_completion_timeout+0x13/0x20 [] ? bnx2fc_get_host_stats+0xa1/0x280 [bnx2fc] [] ? fc_stat_show+0x90/0xc0 [scsi_transport_fc] [] ? show_fcstat_tx_frames+0x16/0x20 [scsi_transport_fc] [] ? dev_attr_show+0x27/0x50 [] ? __get_free_pages+0xe/0x50 [] ? sysfs_read_file+0x111/0x200 [] ? vfs_read+0xb5/0x1a0 [] ? fget_light_pos+0x16/0x50 [] ? sys_read+0x51/0xb0 [] ? __audit_syscall_exit+0x25e/0x290 [] ? system_call_fastpath+0x16/0x1b Signed-off-by: Maurizio Lombardi Acked-by: Chad Dupuis Signed-off-by: Martin K. Petersen --- drivers/scsi/bnx2fc/bnx2fc.h | 1 + drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h index 4fc8ed5fe067..1f424e40afdf 100644 --- a/drivers/scsi/bnx2fc/bnx2fc.h +++ b/drivers/scsi/bnx2fc/bnx2fc.h @@ -191,6 +191,7 @@ struct bnx2fc_hba { struct bnx2fc_cmd_mgr *cmd_mgr; spinlock_t hba_lock; struct mutex hba_mutex; + struct mutex hba_stats_mutex; unsigned long adapter_state; #define ADAPTER_STATE_UP 0 #define ADAPTER_STATE_GOING_DOWN 1 diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index 93b5a0012417..902722dc4ce3 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -663,15 +663,17 @@ static struct fc_host_statistics *bnx2fc_get_host_stats(struct Scsi_Host *shost) if (!fw_stats) return NULL; + mutex_lock(&hba->hba_stats_mutex); + bnx2fc_stats = fc_get_host_stats(shost); init_completion(&hba->stat_req_done); if (bnx2fc_send_stat_req(hba)) - return bnx2fc_stats; + goto unlock_stats_mutex; rc = wait_for_completion_timeout(&hba->stat_req_done, (2 * HZ)); if (!rc) { BNX2FC_HBA_DBG(lport, "FW stat req timed out\n"); - return bnx2fc_stats; + goto unlock_stats_mutex; } BNX2FC_STATS(hba, rx_stat2, fc_crc_cnt); bnx2fc_stats->invalid_crc_count += hba->bfw_stats.fc_crc_cnt; @@ -693,6 +695,9 @@ static struct fc_host_statistics *bnx2fc_get_host_stats(struct Scsi_Host *shost) memcpy(&hba->prev_stats, hba->stats_buffer, sizeof(struct fcoe_statistics_params)); + +unlock_stats_mutex: + mutex_unlock(&hba->hba_stats_mutex); return bnx2fc_stats; } @@ -1340,6 +1345,7 @@ static struct bnx2fc_hba *bnx2fc_hba_create(struct cnic_dev *cnic) } spin_lock_init(&hba->hba_lock); mutex_init(&hba->hba_mutex); + mutex_init(&hba->hba_stats_mutex); hba->cnic = cnic; From 9dfa7bba35ac08a63565d58c454dccb7e1bb0a08 Mon Sep 17 00:00:00 2001 From: Michael Schmitz Date: Sun, 30 Apr 2017 19:49:21 +1200 Subject: [PATCH 0155/1065] fix race in drivers/char/random.c:get_reg() get_reg() can be reentered on architectures with prioritized interrupts (m68k in this case), causing f->reg_index to be incremented after the range check. Out of bounds memory access past the pt_regs struct results. This will go mostly undetected unless access is beyond end of memory. Prevent the race by disabling interrupts in get_reg(). Tested on m68k (Atari Falcon, and ARAnyM emulator). Kudos to Geert Uytterhoeven for helping to trace this race. Signed-off-by: Michael Schmitz Signed-off-by: Theodore Ts'o --- drivers/char/random.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 0ab024918907..a561f0c2f428 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1097,12 +1097,16 @@ static void add_interrupt_bench(cycles_t start) static __u32 get_reg(struct fast_pool *f, struct pt_regs *regs) { __u32 *ptr = (__u32 *) regs; + unsigned long flags; if (regs == NULL) return 0; + local_irq_save(flags); if (f->reg_idx >= sizeof(struct pt_regs) / sizeof(__u32)) f->reg_idx = 0; - return *(ptr + f->reg_idx++); + ptr += f->reg_idx++; + local_irq_restore(flags); + return *ptr; } void add_interrupt_randomness(int irq, int irq_flags) From 624327f8794704c5066b11a52f9da6a09dce7f9a Mon Sep 17 00:00:00 2001 From: Eryu Guan Date: Wed, 24 May 2017 18:02:20 -0400 Subject: [PATCH 0156/1065] ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() ext4_find_unwritten_pgoff() is used to search for offset of hole or data in page range [index, end] (both inclusive), and the max number of pages to search should be at least one, if end == index. Otherwise the only page is missed and no hole or data is found, which is not correct. When block size is smaller than page size, this can be demonstrated by preallocating a file with size smaller than page size and writing data to the last block. E.g. run this xfs_io command on a 1k block size ext4 on x86_64 host. # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \ -c "seek -d 0" /mnt/ext4/testfile wrote 1024/1024 bytes at offset 2048 1 KiB, 1 ops; 0.0000 sec (42.459 MiB/sec and 43478.2609 ops/sec) Whence Result DATA EOF Data at offset 2k was missed, and lseek(2) returned ENXIO. This is unconvered by generic/285 subtest 07 and 08 on ppc64 host, where pagesize is 64k. Because a recent change to generic/285 reduced the preallocated file size to smaller than 64k. Signed-off-by: Eryu Guan Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara --- fs/ext4/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 2b00bf84c05b..02ce7e7bbdf5 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -481,7 +481,7 @@ static int ext4_find_unwritten_pgoff(struct inode *inode, int i, num; unsigned long nr_pages; - num = min_t(pgoff_t, end - index, PAGEVEC_SIZE); + num = min_t(pgoff_t, end - index, PAGEVEC_SIZE - 1) + 1; nr_pages = pagevec_lookup(&pvec, inode->i_mapping, index, (pgoff_t)num); if (nr_pages == 0) From e5465795cac48233c9b606a7a419f4190a91851e Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 24 May 2017 18:05:29 -0400 Subject: [PATCH 0157/1065] ext4: fix off-by-one error when writing back pages before dio read The 'lend' argument of filemap_write_and_wait_range() is inclusive, so we need to subtract 1 from pos + count. Note that 'count' is guaranteed to be nonzero since ext4_file_read_iter() returns early when given a 0 count. Fixes: 16c54688592c ("ext4: Allow parallel DIO reads") Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara --- fs/ext4/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 7cd99de8c4ba..90b264928742 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3713,7 +3713,7 @@ static ssize_t ext4_direct_IO_read(struct kiocb *iocb, struct iov_iter *iter) */ inode_lock_shared(inode); ret = filemap_write_and_wait_range(mapping, iocb->ki_pos, - iocb->ki_pos + count); + iocb->ki_pos + count - 1); if (ret) goto out_unlock; ret = __blockdev_direct_IO(iocb, inode, inode->i_sb->s_bdev, From d6b975504e7e71fc29fcd14530433e816d7f5aac Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 24 May 2017 18:10:49 -0400 Subject: [PATCH 0158/1065] ext4: remove unused d_name argument from ext4_search_dir() et al. Now that we are passing a struct ext4_filename, we do not need to pass around the original struct qstr too. Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara --- fs/ext4/ext4.h | 2 -- fs/ext4/inline.c | 5 ++--- fs/ext4/namei.c | 13 +++++-------- 3 files changed, 7 insertions(+), 13 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 8e8046104f4d..32191548abed 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -2523,7 +2523,6 @@ extern int ext4_search_dir(struct buffer_head *bh, int buf_size, struct inode *dir, struct ext4_filename *fname, - const struct qstr *d_name, unsigned int offset, struct ext4_dir_entry_2 **res_dir); extern int ext4_generic_delete_entry(handle_t *handle, @@ -3007,7 +3006,6 @@ extern int htree_inlinedir_to_tree(struct file *dir_file, int *has_inline_data); extern struct buffer_head *ext4_find_inline_entry(struct inode *dir, struct ext4_filename *fname, - const struct qstr *d_name, struct ext4_dir_entry_2 **res_dir, int *has_inline_data); extern int ext4_delete_inline_entry(handle_t *handle, diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index d5dea4c293ef..8d141c0c8ff9 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -1627,7 +1627,6 @@ out: struct buffer_head *ext4_find_inline_entry(struct inode *dir, struct ext4_filename *fname, - const struct qstr *d_name, struct ext4_dir_entry_2 **res_dir, int *has_inline_data) { @@ -1649,7 +1648,7 @@ struct buffer_head *ext4_find_inline_entry(struct inode *dir, EXT4_INLINE_DOTDOT_SIZE; inline_size = EXT4_MIN_INLINE_DATA_SIZE - EXT4_INLINE_DOTDOT_SIZE; ret = ext4_search_dir(iloc.bh, inline_start, inline_size, - dir, fname, d_name, 0, res_dir); + dir, fname, 0, res_dir); if (ret == 1) goto out_find; if (ret < 0) @@ -1662,7 +1661,7 @@ struct buffer_head *ext4_find_inline_entry(struct inode *dir, inline_size = ext4_get_inline_size(dir) - EXT4_MIN_INLINE_DATA_SIZE; ret = ext4_search_dir(iloc.bh, inline_start, inline_size, - dir, fname, d_name, 0, res_dir); + dir, fname, 0, res_dir); if (ret == 1) goto out_find; diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index b81f7d46f344..404256caf9cf 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1155,12 +1155,11 @@ errout: static inline int search_dirblock(struct buffer_head *bh, struct inode *dir, struct ext4_filename *fname, - const struct qstr *d_name, unsigned int offset, struct ext4_dir_entry_2 **res_dir) { return ext4_search_dir(bh, bh->b_data, dir->i_sb->s_blocksize, dir, - fname, d_name, offset, res_dir); + fname, offset, res_dir); } /* @@ -1262,7 +1261,6 @@ static inline bool ext4_match(const struct ext4_filename *fname, */ int ext4_search_dir(struct buffer_head *bh, char *search_buf, int buf_size, struct inode *dir, struct ext4_filename *fname, - const struct qstr *d_name, unsigned int offset, struct ext4_dir_entry_2 **res_dir) { struct ext4_dir_entry_2 * de; @@ -1355,7 +1353,7 @@ static struct buffer_head * ext4_find_entry (struct inode *dir, if (ext4_has_inline_data(dir)) { int has_inline_data = 1; - ret = ext4_find_inline_entry(dir, &fname, d_name, res_dir, + ret = ext4_find_inline_entry(dir, &fname, res_dir, &has_inline_data); if (has_inline_data) { if (inlined) @@ -1447,7 +1445,7 @@ restart: goto next; } set_buffer_verified(bh); - i = search_dirblock(bh, dir, &fname, d_name, + i = search_dirblock(bh, dir, &fname, block << EXT4_BLOCK_SIZE_BITS(sb), res_dir); if (i == 1) { EXT4_I(dir)->i_dir_start_lookup = block; @@ -1488,7 +1486,6 @@ static struct buffer_head * ext4_dx_find_entry(struct inode *dir, { struct super_block * sb = dir->i_sb; struct dx_frame frames[2], *frame; - const struct qstr *d_name = fname->usr_fname; struct buffer_head *bh; ext4_lblk_t block; int retval; @@ -1505,7 +1502,7 @@ static struct buffer_head * ext4_dx_find_entry(struct inode *dir, if (IS_ERR(bh)) goto errout; - retval = search_dirblock(bh, dir, fname, d_name, + retval = search_dirblock(bh, dir, fname, block << EXT4_BLOCK_SIZE_BITS(sb), res_dir); if (retval == 1) @@ -1530,7 +1527,7 @@ static struct buffer_head * ext4_dx_find_entry(struct inode *dir, bh = NULL; errout: - dxtrace(printk(KERN_DEBUG "%s not found\n", d_name->name)); + dxtrace(printk(KERN_DEBUG "%s not found\n", fname->usr_fname->name)); success: dx_release(frames); return bh; From c41d342b39f15acbdc61948bab0cb3c567ec992a Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 24 May 2017 18:20:31 -0400 Subject: [PATCH 0159/1065] ext4: remove redundant check for encrypted file on dio write path Currently we don't allow direct I/O on encrypted regular files, so in such cases we return 0 early in ext4_direct_IO(). There was also an additional BUG_ON() check in ext4_direct_IO_write(), but it can never be hit because of the earlier check for the exact same condition in ext4_direct_IO(). There was also no matching check on the read path, which made the write path specific check seem very ad-hoc. Just remove the unnecessary BUG_ON(). Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o Reviewed-by: David Gstir Reviewed-by: Jan Kara --- fs/ext4/inode.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 90b264928742..074aeba78259 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3629,9 +3629,6 @@ static ssize_t ext4_direct_IO_write(struct kiocb *iocb, struct iov_iter *iter) get_block_func = ext4_dio_get_block_unwritten_async; dio_flags = DIO_LOCKING; } -#ifdef CONFIG_EXT4_FS_ENCRYPTION - BUG_ON(ext4_encrypted_inode(inode) && S_ISREG(inode->i_mode)); -#endif ret = __blockdev_direct_IO(iocb, inode, inode->i_sb->s_bdev, iter, get_block_func, ext4_end_io_dio, NULL, dio_flags); From b8cb5a545c3dd8b975aad19ea020eabe0a888e8d Mon Sep 17 00:00:00 2001 From: Tahsin Erdogan Date: Wed, 24 May 2017 18:24:07 -0400 Subject: [PATCH 0160/1065] ext4: fix quota charging for shared xattr blocks ext4_xattr_block_set() calls dquot_alloc_block() to charge for an xattr block when new references are made. However if dquot_initialize() hasn't been called on an inode, request for charging is effectively ignored because ext4_inode_info->i_dquot is not initialized yet. Add dquot_initialize() to call paths that lead to ext4_xattr_block_set(). Signed-off-by: Tahsin Erdogan Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara --- fs/ext4/acl.c | 4 ++++ fs/ext4/super.c | 3 +++ fs/ext4/xattr.c | 8 ++++++++ fs/quota/dquot.c | 16 ++++++++++++++++ include/linux/quotaops.h | 6 ++++++ 5 files changed, 37 insertions(+) diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c index fd389935ecd1..3ec0e46de95f 100644 --- a/fs/ext4/acl.c +++ b/fs/ext4/acl.c @@ -4,6 +4,7 @@ * Copyright (C) 2001-2003 Andreas Gruenbacher, */ +#include #include "ext4_jbd2.h" #include "ext4.h" #include "xattr.h" @@ -232,6 +233,9 @@ ext4_set_acl(struct inode *inode, struct posix_acl *acl, int type) handle_t *handle; int error, retries = 0; + error = dquot_initialize(inode); + if (error) + return error; retry: handle = ext4_journal_start(inode, EXT4_HT_XATTR, ext4_jbd2_credits_xattr(inode)); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 8f05c72bc4ec..d37c81f327e7 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1174,6 +1174,9 @@ static int ext4_set_context(struct inode *inode, const void *ctx, size_t len, return res; } + res = dquot_initialize(inode); + if (res) + return res; retry: handle = ext4_journal_start(inode, EXT4_HT_MISC, ext4_jbd2_credits_xattr(inode)); diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 8fb7ce14e6eb..5d3c2536641c 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -888,6 +888,8 @@ inserted: else { u32 ref; + WARN_ON_ONCE(dquot_initialize_needed(inode)); + /* The old block is released after updating the inode. */ error = dquot_alloc_block(inode, @@ -954,6 +956,8 @@ inserted: /* We need to allocate a new block */ ext4_fsblk_t goal, block; + WARN_ON_ONCE(dquot_initialize_needed(inode)); + goal = ext4_group_first_block_no(sb, EXT4_I(inode)->i_block_group); @@ -1166,6 +1170,7 @@ ext4_xattr_set_handle(handle_t *handle, struct inode *inode, int name_index, return -EINVAL; if (strlen(name) > 255) return -ERANGE; + ext4_write_lock_xattr(inode, &no_expand); error = ext4_reserve_inode_write(handle, inode, &is.iloc); @@ -1267,6 +1272,9 @@ ext4_xattr_set(struct inode *inode, int name_index, const char *name, int error, retries = 0; int credits = ext4_jbd2_credits_xattr(inode); + error = dquot_initialize(inode); + if (error) + return error; retry: handle = ext4_journal_start(inode, EXT4_HT_XATTR, credits); if (IS_ERR(handle)) { diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index ebf80c7739e1..48813aeaab80 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -1512,6 +1512,22 @@ int dquot_initialize(struct inode *inode) } EXPORT_SYMBOL(dquot_initialize); +bool dquot_initialize_needed(struct inode *inode) +{ + struct dquot **dquots; + int i; + + if (!dquot_active(inode)) + return false; + + dquots = i_dquot(inode); + for (i = 0; i < MAXQUOTAS; i++) + if (!dquots[i] && sb_has_quota_active(inode->i_sb, i)) + return true; + return false; +} +EXPORT_SYMBOL(dquot_initialize_needed); + /* * Release all quotas referenced by inode. * diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 9c6f768b7d32..dda22f45fc1b 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -44,6 +44,7 @@ void inode_sub_rsv_space(struct inode *inode, qsize_t number); void inode_reclaim_rsv_space(struct inode *inode, qsize_t number); int dquot_initialize(struct inode *inode); +bool dquot_initialize_needed(struct inode *inode); void dquot_drop(struct inode *inode); struct dquot *dqget(struct super_block *sb, struct kqid qid); static inline struct dquot *dqgrab(struct dquot *dquot) @@ -207,6 +208,11 @@ static inline int dquot_initialize(struct inode *inode) return 0; } +static inline bool dquot_initialize_needed(struct inode *inode) +{ + return false; +} + static inline void dquot_drop(struct inode *inode) { } From 4179bc30b2fe85f827d93e0ae7ae8f49ad3afc02 Mon Sep 17 00:00:00 2001 From: Kyungchan Koh Date: Wed, 24 May 2017 10:16:27 -0700 Subject: [PATCH 0161/1065] md: uuid debug statement now in processor byte order. Previously, the uuid debug statements were printed in little-endian format, which wasn't consistent in machines that might not be in little-endian byte order. With this change, the output will be consistent for all machines with different byte-ordering. Signed-off-by: Kyungchan Koh Signed-off-by: Shaohua Li --- drivers/md/bitmap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index bf7419a56454..f4eace5ea184 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -485,10 +485,10 @@ void bitmap_print_sb(struct bitmap *bitmap) pr_debug(" magic: %08x\n", le32_to_cpu(sb->magic)); pr_debug(" version: %d\n", le32_to_cpu(sb->version)); pr_debug(" uuid: %08x.%08x.%08x.%08x\n", - *(__u32 *)(sb->uuid+0), - *(__u32 *)(sb->uuid+4), - *(__u32 *)(sb->uuid+8), - *(__u32 *)(sb->uuid+12)); + le32_to_cpu(*(__u32 *)(sb->uuid+0)), + le32_to_cpu(*(__u32 *)(sb->uuid+4)), + le32_to_cpu(*(__u32 *)(sb->uuid+8)), + le32_to_cpu(*(__u32 *)(sb->uuid+12))); pr_debug(" events: %llu\n", (unsigned long long) le64_to_cpu(sb->events)); pr_debug("events cleared: %llu\n", From e153903686deac9ea8c499b49516126f1a844fdb Mon Sep 17 00:00:00 2001 From: Nix Date: Tue, 16 May 2017 10:13:31 +0100 Subject: [PATCH 0162/1065] md: report sector of stripes with check mismatches This makes it possible, with appropriate filesystem support, for a sysadmin to tell what is affected by the mismatch, and whether it should be ignored (if it's inside a swap partition, for instance). We ratelimit to prevent log flooding: if there are so many mismatches that ratelimiting is necessary, the individual messages are relatively unlikely to be important (either the machine is swapping like crazy or something is very wrong with the disk). Signed-off-by: Nick Alcock Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 9c4f7659f8b1..722064689e82 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4085,10 +4085,15 @@ static void handle_parity_checks5(struct r5conf *conf, struct stripe_head *sh, set_bit(STRIPE_INSYNC, &sh->state); else { atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches); - if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) + if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) { /* don't try to repair!! */ set_bit(STRIPE_INSYNC, &sh->state); - else { + pr_warn_ratelimited("%s: mismatch sector in range " + "%llu-%llu\n", mdname(conf->mddev), + (unsigned long long) sh->sector, + (unsigned long long) sh->sector + + STRIPE_SECTORS); + } else { sh->check_state = check_state_compute_run; set_bit(STRIPE_COMPUTE_RUN, &sh->state); set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request); @@ -4237,10 +4242,15 @@ static void handle_parity_checks6(struct r5conf *conf, struct stripe_head *sh, } } else { atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches); - if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) + if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) { /* don't try to repair!! */ set_bit(STRIPE_INSYNC, &sh->state); - else { + pr_warn_ratelimited("%s: mismatch sector in range " + "%llu-%llu\n", mdname(conf->mddev), + (unsigned long long) sh->sector, + (unsigned long long) sh->sector + + STRIPE_SECTORS); + } else { int *target = &sh->ops.target; sh->ops.target = -1; From cb590700e04d4f59179c44f360217f5ad04ae262 Mon Sep 17 00:00:00 2001 From: "himanshu.madhani@cavium.com" Date: Wed, 24 May 2017 18:06:18 -0700 Subject: [PATCH 0163/1065] scsi: qla2xxx: Fix recursive loop during target mode configuration for ISP25XX leaving system unresponsive Following messages are seen into system logs qla2xxx [0000:09:00.0]-00af:9: Performing ISP error recovery - ha=ffff98315ee30000. qla2xxx [0000:09:00.0]-504b:9: RISC paused -- HCCR=40, Dumping firmware. qla2xxx [0000:09:00.0]-d009:9: Firmware has been previously dumped (ffffba488c001000) -- ignoring request. qla2xxx [0000:09:00.0]-504b:9: RISC paused -- HCCR=40, Dumping firmware. See Bugzilla for details https://bugzilla.kernel.org/show_bug.cgi?id=195285 Fixes: d74595278f4ab ("scsi: qla2xxx: Add multiple queue pair functionality.") Cc: # v4.10+ Reported-by: Laurence Oberman Reported-by: Anthony Bloodoff Tested-by: Laurence Oberman Tested-by: Anthony Bloodoff Signed-off-by: Himanshu Madhani Signed-off-by: Giridhar Malavali Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_isr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index aac03504d9a3..2572121b765b 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -3282,7 +3282,7 @@ msix_register_fail: } /* Enable MSI-X vector for response queue update for queue 0 */ - if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) { + if (IS_QLA25XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha)) { if (ha->msixbase && ha->mqiobase && (ha->max_rsp_queues > 1 || ha->max_req_queues > 1 || ql2xmqsupport)) From 0ea88662b5c6404a8f7af6b040b3cf1f0e8c3a66 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Wed, 24 May 2017 18:06:19 -0700 Subject: [PATCH 0164/1065] scsi: qla2xxx: Fix NULL pointer access due to redundant fc_host_port_name call Remove redundant fc_host_port_name calls to prevent early access of scsi_host->shost_data buffer. This prevent null pointer access. Following stack trace is seen: BUG: unable to handle kernel NULL pointer dereference at 00000000000008 IP: qla24xx_report_id_acquisition+0x22d/0x3a0 [qla2xxx] Cc: # v4.11+ Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_mbx.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index a113ab3592a7..12fea77e31c6 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3676,15 +3676,6 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, qlt_update_host_map(vha, id); } - fc_host_port_name(vha->host) = - wwn_to_u64(vha->port_name); - - if (qla_ini_mode_enabled(vha)) - ql_dbg(ql_dbg_mbx, vha, 0x1018, - "FA-WWN portname %016llx (%x)\n", - fc_host_port_name(vha->host), - rptid_entry->vp_status); - set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags); set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags); } else { From b95b9452aacf80659ea67bf0948cbfa7e28e5e0b Mon Sep 17 00:00:00 2001 From: Sawan Chandak Date: Wed, 24 May 2017 18:06:20 -0700 Subject: [PATCH 0165/1065] scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue when driver is loaded with Multi Queue enabled, it was noticed that there was one less queue pair created. Following message would indicate this: "No resources to create additional q pair." The result of one less queue pair means that system can crash, if the block mq layer thinks there is an extra hardware queue available, and the driver will use a NULL ptr qpair in that instance. Following stack trace is seen in one of the crash: irq_create_affinity_masks+0x98/0x530 irq_create_affinity_masks+0x98/0x530 __pci_enable_msix+0x321/0x4e0 mutex_lock+0x12/0x40 pci_alloc_irq_vectors_affinity+0xb5/0x140 qla24xx_enable_msix+0x79/0x530 [qla2xxx] qla2x00_request_irqs+0x61/0x2d0 [qla2xxx] qla2x00_probe_one+0xc73/0x2390 [qla2xxx] ida_simple_get+0x98/0x100 kernfs_next_descendant_post+0x40/0x50 local_pci_probe+0x45/0xa0 pci_device_probe+0xfc/0x140 driver_probe_device+0x2c5/0x470 __driver_attach+0xdd/0xe0 driver_probe_device+0x470/0x470 bus_for_each_dev+0x6c/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x45/0x270 driver_register+0x60/0xe0 __pci_register_driver+0x4c/0x50 qla2x00_module_init+0x1ce/0x21e [qla2xxx] Cc: # v4.10+ Signed-off-by: Sawan Chandak Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_init.c | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index ae119018dfaa..eddbc1218a39 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -3425,6 +3425,7 @@ struct qla_hw_data { uint8_t max_req_queues; uint8_t max_rsp_queues; uint8_t max_qpairs; + uint8_t num_qpairs; struct qla_qpair *base_qpair; struct qla_npiv_entry *npiv_info; uint16_t nvram_npiv_size; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 034743309ada..0391fc317003 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -7543,12 +7543,13 @@ struct qla_qpair *qla2xxx_create_qpair(struct scsi_qla_host *vha, int qos, int v /* Assign available que pair id */ mutex_lock(&ha->mq_lock); qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs); - if (qpair_id >= ha->max_qpairs) { + if (ha->num_qpairs >= ha->max_qpairs) { mutex_unlock(&ha->mq_lock); ql_log(ql_log_warn, vha, 0x0183, "No resources to create additional q pair.\n"); goto fail_qid_map; } + ha->num_qpairs++; set_bit(qpair_id, ha->qpair_qid_map); ha->queue_pair_map[qpair_id] = qpair; qpair->id = qpair_id; @@ -7635,6 +7636,7 @@ fail_rsp: fail_msix: ha->queue_pair_map[qpair_id] = NULL; clear_bit(qpair_id, ha->qpair_qid_map); + ha->num_qpairs--; mutex_unlock(&ha->mq_lock); fail_qid_map: kfree(qpair); @@ -7660,6 +7662,7 @@ int qla2xxx_delete_qpair(struct scsi_qla_host *vha, struct qla_qpair *qpair) mutex_lock(&ha->mq_lock); ha->queue_pair_map[qpair->id] = NULL; clear_bit(qpair->id, ha->qpair_qid_map); + ha->num_qpairs--; list_del(&qpair->qp_list_elem); if (list_empty(&vha->qp_list)) vha->flags.qpairs_available = 0; From ce6c668b146cc4f4442111e2bcee4c3af94e1ddf Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Wed, 24 May 2017 18:06:21 -0700 Subject: [PATCH 0166/1065] scsi: qla2xxx: Modify T262 FW dump template to specify same start/end to debug customer issues Firmware dump allows for debugging customer issues. This patch fixes start/end pointer calculation to capture T262 template entry for dump tool. Cc: # v4.10+ Signed-off-by: Joe Carnuccio Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_tmpl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c index 8a58ef3adab4..c197972a3e2d 100644 --- a/drivers/scsi/qla2xxx/qla_tmpl.c +++ b/drivers/scsi/qla2xxx/qla_tmpl.c @@ -371,7 +371,7 @@ qla27xx_fwdt_entry_t262(struct scsi_qla_host *vha, goto done; } - if (end <= start || start == 0 || end == 0) { + if (end < start || start == 0 || end == 0) { ql_dbg(ql_dbg_misc, vha, 0xd023, "%s: unusable range (start=%x end=%x)\n", __func__, ent->t262.end_addr, ent->t262.start_addr); From 1d63496516c61e2e1351f10e6becbfc9ee511395 Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Wed, 24 May 2017 18:06:22 -0700 Subject: [PATCH 0167/1065] scsi: qla2xxx: Set bit 15 for DIAG_ECHO_TEST MBC Set bit (BIT_15) to send right ECHO payload information for Diagnostic Echo Test command. Cc: # v4.10+ Signed-off-by: Joe Carnuccio Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_bsg.c | 9 +++++---- drivers/scsi/qla2xxx/qla_mbx.c | 4 ++-- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 16d1cd50feed..ca3420de5a01 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -730,6 +730,8 @@ qla2x00_process_loopback(struct bsg_job *bsg_job) return -EIO; } + memset(&elreq, 0, sizeof(elreq)); + elreq.req_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); @@ -795,10 +797,9 @@ qla2x00_process_loopback(struct bsg_job *bsg_job) if (atomic_read(&vha->loop_state) == LOOP_READY && (ha->current_topology == ISP_CFG_F || - ((IS_QLA81XX(ha) || IS_QLA8031(ha) || IS_QLA8044(ha)) && - le32_to_cpu(*(uint32_t *)req_data) == ELS_OPCODE_BYTE - && req_data_len == MAX_ELS_FRAME_PAYLOAD)) && - elreq.options == EXTERNAL_LOOPBACK) { + (le32_to_cpu(*(uint32_t *)req_data) == ELS_OPCODE_BYTE && + req_data_len == MAX_ELS_FRAME_PAYLOAD)) && + elreq.options == EXTERNAL_LOOPBACK) { type = "FC_BSG_HST_VENDOR_ECHO_DIAG"; ql_dbg(ql_dbg_user, vha, 0x701e, "BSG request type: %s.\n", type); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 12fea77e31c6..cba1fc5e8be9 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -4812,9 +4812,9 @@ qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, memset(mcp->mb, 0 , sizeof(mcp->mb)); mcp->mb[0] = MBC_DIAGNOSTIC_ECHO; - mcp->mb[1] = mreq->options | BIT_6; /* BIT_6 specifies 64bit address */ + /* BIT_6 specifies 64bit address */ + mcp->mb[1] = mreq->options | BIT_15 | BIT_6; if (IS_CNA_CAPABLE(ha)) { - mcp->mb[1] |= BIT_15; mcp->mb[2] = vha->fcoe_fcf_idx; } mcp->mb[16] = LSW(mreq->rcv_dma); From 74939a0bc772d642b1c12827966c4c3a3c90ea2c Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Wed, 24 May 2017 18:06:23 -0700 Subject: [PATCH 0168/1065] scsi: qla2xxx: Fix mailbox pointer error in fwdump capture Cc: # v4.10+ Signed-off-by: Joe Carnuccio Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_dbg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 51b4179469d1..88748a6ab73f 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -1131,7 +1131,7 @@ qla24xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) /* Mailbox registers. */ mbx_reg = ®->mailbox0; - for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++, dmp_reg++) + for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++, mbx_reg++) fw->mailbox_reg[cnt] = htons(RD_REG_WORD(mbx_reg)); /* Transfer sequence registers. */ @@ -2090,7 +2090,7 @@ qla83xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) /* Mailbox registers. */ mbx_reg = ®->mailbox0; - for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++, dmp_reg++) + for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++, mbx_reg++) fw->mailbox_reg[cnt] = htons(RD_REG_WORD(mbx_reg)); /* Transfer sequence registers. */ From d5ff0eed3a6621f6fd6c14f042c30a6eacfa77f1 Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Wed, 24 May 2017 18:06:24 -0700 Subject: [PATCH 0169/1065] scsi: qla2xxx: Fix crash due to NULL pointer dereference of ctx Fixes following signature in the stack trace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000374 IP: [] qla2x00_sp_free_dma+0xeb/0x2a0 [qla2xxx] Cc: # v4.10+ Signed-off-by: Joe Carnuccio Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_inline.h | 26 +++++++------------------- drivers/scsi/qla2xxx/qla_os.c | 30 +++++++++++++++++++----------- drivers/scsi/qla2xxx/qla_target.c | 10 ++++++---- 3 files changed, 32 insertions(+), 34 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 66df6cec59da..c61a6a871c8e 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -129,28 +129,16 @@ qla2x00_clear_loop_id(fc_port_t *fcport) { } static inline void -qla2x00_clean_dsd_pool(struct qla_hw_data *ha, srb_t *sp, - struct qla_tgt_cmd *tc) +qla2x00_clean_dsd_pool(struct qla_hw_data *ha, struct crc_context *ctx) { - struct dsd_dma *dsd_ptr, *tdsd_ptr; - struct crc_context *ctx; - - if (sp) - ctx = (struct crc_context *)GET_CMD_CTX_SP(sp); - else if (tc) - ctx = (struct crc_context *)tc->ctx; - else { - BUG(); - return; - } + struct dsd_dma *dsd, *tdsd; /* clean up allocated prev pool */ - list_for_each_entry_safe(dsd_ptr, tdsd_ptr, - &ctx->dsd_list, list) { - dma_pool_free(ha->dl_dma_pool, dsd_ptr->dsd_addr, - dsd_ptr->dsd_list_dma); - list_del(&dsd_ptr->list); - kfree(dsd_ptr); + list_for_each_entry_safe(dsd, tdsd, &ctx->dsd_list, list) { + dma_pool_free(ha->dl_dma_pool, dsd->dsd_addr, + dsd->dsd_list_dma); + list_del(&dsd->list); + kfree(dsd); } INIT_LIST_HEAD(&ctx->dsd_list); } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index af25d8afd42a..2a2ce7476339 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -630,29 +630,34 @@ qla2x00_sp_free_dma(void *ptr) sp->flags &= ~SRB_CRC_PROT_DMA_VALID; } + if (!ctx) + goto end; + if (sp->flags & SRB_CRC_CTX_DSD_VALID) { /* List assured to be having elements */ - qla2x00_clean_dsd_pool(ha, sp, NULL); + qla2x00_clean_dsd_pool(ha, ctx); sp->flags &= ~SRB_CRC_CTX_DSD_VALID; } if (sp->flags & SRB_CRC_CTX_DMA_VALID) { - dma_pool_free(ha->dl_dma_pool, ctx, - ((struct crc_context *)ctx)->crc_ctx_dma); + struct crc_context *ctx0 = ctx; + + dma_pool_free(ha->dl_dma_pool, ctx0, ctx0->crc_ctx_dma); sp->flags &= ~SRB_CRC_CTX_DMA_VALID; } if (sp->flags & SRB_FCP_CMND_DMA_VALID) { - struct ct6_dsd *ctx1 = (struct ct6_dsd *)ctx; + struct ct6_dsd *ctx1 = ctx; dma_pool_free(ha->fcp_cmnd_dma_pool, ctx1->fcp_cmnd, - ctx1->fcp_cmnd_dma); + ctx1->fcp_cmnd_dma); list_splice(&ctx1->dsd_list, &ha->gbl_dsd_list); ha->gbl_dsd_inuse -= ctx1->dsd_use_cnt; ha->gbl_dsd_avail += ctx1->dsd_use_cnt; mempool_free(ctx1, ha->ctx_mempool); } +end: CMD_SP(cmd) = NULL; qla2x00_rel_sp(sp); } @@ -699,21 +704,24 @@ qla2xxx_qpair_sp_free_dma(void *ptr) sp->flags &= ~SRB_CRC_PROT_DMA_VALID; } + if (!ctx) + goto end; + if (sp->flags & SRB_CRC_CTX_DSD_VALID) { /* List assured to be having elements */ - qla2x00_clean_dsd_pool(ha, sp, NULL); + qla2x00_clean_dsd_pool(ha, ctx); sp->flags &= ~SRB_CRC_CTX_DSD_VALID; } if (sp->flags & SRB_CRC_CTX_DMA_VALID) { - dma_pool_free(ha->dl_dma_pool, ctx, - ((struct crc_context *)ctx)->crc_ctx_dma); + struct crc_context *ctx0 = ctx; + + dma_pool_free(ha->dl_dma_pool, ctx, ctx0->crc_ctx_dma); sp->flags &= ~SRB_CRC_CTX_DMA_VALID; } if (sp->flags & SRB_FCP_CMND_DMA_VALID) { - struct ct6_dsd *ctx1 = (struct ct6_dsd *)ctx; - + struct ct6_dsd *ctx1 = ctx; dma_pool_free(ha->fcp_cmnd_dma_pool, ctx1->fcp_cmnd, ctx1->fcp_cmnd_dma); list_splice(&ctx1->dsd_list, &ha->gbl_dsd_list); @@ -721,7 +729,7 @@ qla2xxx_qpair_sp_free_dma(void *ptr) ha->gbl_dsd_avail += ctx1->dsd_use_cnt; mempool_free(ctx1, ha->ctx_mempool); } - +end: CMD_SP(cmd) = NULL; qla2xxx_rel_qpair_sp(sp->qpair, sp); } diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 0e03ca2ab3e5..e766d8412384 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -2245,11 +2245,13 @@ static void qlt_unmap_sg(struct scsi_qla_host *vha, struct qla_tgt_cmd *cmd) pci_unmap_sg(ha->pdev, cmd->prot_sg, cmd->prot_sg_cnt, cmd->dma_data_direction); - if (cmd->ctx_dsd_alloced) - qla2x00_clean_dsd_pool(ha, NULL, cmd); + if (!cmd->ctx) + return; - if (cmd->ctx) - dma_pool_free(ha->dl_dma_pool, cmd->ctx, cmd->ctx->crc_ctx_dma); + if (cmd->ctx_dsd_alloced) + qla2x00_clean_dsd_pool(ha, cmd->ctx); + + dma_pool_free(ha->dl_dma_pool, cmd->ctx, cmd->ctx->crc_ctx_dma); } static int qlt_check_reserve_free_req(struct scsi_qla_host *vha, From 3d51b956267343a65498704ada854c33c0f5e946 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 19 May 2017 10:04:01 +0200 Subject: [PATCH 0170/1065] staging: ccree: add CRYPTO dependency A rare randconfig build error shows up when we have CONFIG_CRYPTO=m in combination with a built-in CCREE driver: crypto/hmac.o: In function `hmac_update': hmac.c:(.text.hmac_update+0x28): undefined reference to `crypto_shash_update' crypto/hmac.o: In function `hmac_setkey': hmac.c:(.text.hmac_setkey+0x90): undefined reference to `crypto_shash_digest' hmac.c:(.text.hmac_setkey+0x154): undefined reference to `crypto_shash_update' drivers/staging/ccree/ssi_cipher.o: In function `ssi_blkcipher_setkey': ssi_cipher.c:(.text.ssi_blkcipher_setkey+0x350): undefined reference to `crypto_shash_digest' drivers/staging/ccree/ssi_cipher.o: In function `ssi_blkcipher_exit': ssi_cipher.c:(.text.ssi_blkcipher_exit+0xd4): undefined reference to `crypto_destroy_tfm' drivers/staging/ccree/ssi_cipher.o: In function `ssi_blkcipher_init': ssi_cipher.c:(.text.ssi_blkcipher_init+0x1b0): undefined reference to `crypto_alloc_shash' drivers/staging/ccree/ssi_cipher.o: In function `ssi_ablkcipher_free': ssi_cipher.c:(.text.ssi_ablkcipher_free+0x48): undefined reference to `crypto_unregister_alg' drivers/staging/ccree/ssi_cipher.o: In function `ssi_ablkcipher_alloc': ssi_cipher.c:(.text.ssi_ablkcipher_alloc+0x138): undefined reference to `crypto_register_alg' ssi_cipher.c:(.text.ssi_ablkcipher_alloc+0x274): undefined reference to `crypto_blkcipher_type' We actually need to depend on both CRYPTO and CRYPTO_HW here to avoid the problem, since CRYPTO_HW is a bool symbol and by itself that does not force CCREE to be a loadable module when the core cryto support is modular. Fixes: 50cfbbb7e627 ("staging: ccree: add ahash support") Signed-off-by: Arnd Bergmann Acked-By: Gilad Ben-Yossef Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ccree/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/ccree/Kconfig b/drivers/staging/ccree/Kconfig index ae627049c499..4be87f503e3b 100644 --- a/drivers/staging/ccree/Kconfig +++ b/drivers/staging/ccree/Kconfig @@ -1,6 +1,6 @@ config CRYPTO_DEV_CCREE tristate "Support for ARM TrustZone CryptoCell C7XX family of Crypto accelerators" - depends on CRYPTO_HW && OF && HAS_DMA + depends on CRYPTO && CRYPTO_HW && OF && HAS_DMA default n select CRYPTO_HASH select CRYPTO_BLKCIPHER From 7f53de2069c801776f0f5d1a1d665324967a4fab Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 23 May 2017 17:07:41 -0700 Subject: [PATCH 0171/1065] firmware: vpd: do not leave freed section attributes to the list We should only add section attribute to the list of section attributes if we successfully created corresponding sysfs attribute. Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver") Signed-off-by: Dmitry Torokhov Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/google/vpd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c index 1e7860f02f4f..23a24a6d02c2 100644 --- a/drivers/firmware/google/vpd.c +++ b/drivers/firmware/google/vpd.c @@ -136,12 +136,12 @@ static int vpd_section_attrib_add(const u8 *key, s32 key_len, info->value = value; INIT_LIST_HEAD(&info->list); - list_add_tail(&info->list, &sec->attribs); ret = sysfs_create_bin_file(sec->kobj, &info->bin_attr); if (ret) goto free_info_key; + list_add_tail(&info->list, &sec->attribs); return 0; free_info_key: From ce57cba37f3721c21e46adf21c61292dfd7a9c04 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 23 May 2017 17:07:43 -0700 Subject: [PATCH 0172/1065] firmware: vpd: avoid potential use-after-free when destroying section We should not free info->key before we remove sysfs attribute that uses this data as its name. Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver") Signed-off-by: Dmitry Torokhov Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/google/vpd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c index 23a24a6d02c2..db49c6f98153 100644 --- a/drivers/firmware/google/vpd.c +++ b/drivers/firmware/google/vpd.c @@ -158,8 +158,8 @@ static void vpd_section_attrib_destroy(struct vpd_section *sec) struct vpd_attrib_info *temp; list_for_each_entry_safe(info, temp, &sec->attribs, list) { - kfree(info->key); sysfs_remove_bin_file(sec->kobj, &info->bin_attr); + kfree(info->key); kfree(info); } } From 2ee1cc70552e5520a275254427c0c37fc81728d2 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 23 May 2017 17:07:44 -0700 Subject: [PATCH 0173/1065] firmware: vpd: do not leak kobjects kobject_del() only unlinks kobject, we need to use kobject_put() to make sure kobject will go away completely. Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver") Signed-off-by: Dmitry Torokhov Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/google/vpd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c index db49c6f98153..31058d400bda 100644 --- a/drivers/firmware/google/vpd.c +++ b/drivers/firmware/google/vpd.c @@ -244,7 +244,7 @@ static int vpd_section_destroy(struct vpd_section *sec) { if (sec->enabled) { vpd_section_attrib_destroy(sec); - kobject_del(sec->kobj); + kobject_put(sec->kobj); sysfs_remove_bin_file(vpd_kobj, &sec->bin_attr); kfree(sec->raw_name); iounmap(sec->baseaddr); @@ -331,7 +331,7 @@ static void __exit vpd_platform_exit(void) { vpd_section_destroy(&ro_vpd); vpd_section_destroy(&rw_vpd); - kobject_del(vpd_kobj); + kobject_put(vpd_kobj); } module_init(vpd_platform_init); From 717902cc93118119a6fce7765da6cf2786987418 Mon Sep 17 00:00:00 2001 From: Timmy Li Date: Mon, 22 May 2017 16:48:28 +0100 Subject: [PATCH 0174/1065] ARM64: PCI: Fix struct acpi_pci_root_ops allocation failure path Commit 093d24a20442 ("arm64: PCI: Manage controller-specific data on per-controller basis") added code to allocate ACPI PCI root_ops dynamically on a per host bridge basis but failed to update the corresponding memory allocation failure path in pci_acpi_scan_root() leading to a potential memory leakage. Fix it by adding the required kfree call. Fixes: 093d24a20442 ("arm64: PCI: Manage controller-specific data on per-controller basis") Reviewed-by: Tomasz Nowicki Signed-off-by: Timmy Li [lorenzo.pieralisi@arm.com: refactored code, rewrote commit log] Signed-off-by: Lorenzo Pieralisi CC: Will Deacon CC: Bjorn Helgaas Signed-off-by: Catalin Marinas --- arch/arm64/kernel/pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c index 4f0e3ebfea4b..c7e3e6387a49 100644 --- a/arch/arm64/kernel/pci.c +++ b/arch/arm64/kernel/pci.c @@ -191,8 +191,10 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) return NULL; root_ops = kzalloc_node(sizeof(*root_ops), GFP_KERNEL, node); - if (!root_ops) + if (!root_ops) { + kfree(ri); return NULL; + } ri->cfg = pci_acpi_setup_ecam_mapping(root); if (!ri->cfg) { From 3eff8ecd271d941b2326dba7defd0ca7c4c0baf5 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 21 May 2017 00:45:46 +0000 Subject: [PATCH 0175/1065] goldfish_pipe: use GFP_ATOMIC under spin lock The function get_free_pipe_id_locked() is called from goldfish_pipe_open() with a lock is held, so we should use GFP_ATOMIC instead of GFP_KERNEL. Signed-off-by: Wei Yongjun Signed-off-by: Greg Kroah-Hartman --- drivers/platform/goldfish/goldfish_pipe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c index 2de1e603bd2b..5f3672153b12 100644 --- a/drivers/platform/goldfish/goldfish_pipe.c +++ b/drivers/platform/goldfish/goldfish_pipe.c @@ -704,7 +704,7 @@ static int get_free_pipe_id_locked(struct goldfish_pipe_dev *dev) /* Reallocate the array */ u32 new_capacity = 2 * dev->pipes_capacity; struct goldfish_pipe **pipes = - kcalloc(new_capacity, sizeof(*pipes), GFP_KERNEL); + kcalloc(new_capacity, sizeof(*pipes), GFP_ATOMIC); if (!pipes) return -ENOMEM; memcpy(pipes, dev->pipes, sizeof(*pipes) * dev->pipes_capacity); From cdc1daca1b9b9ea3809009af944ade641dc32e86 Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Thu, 18 May 2017 16:53:20 -0300 Subject: [PATCH 0176/1065] MAINTAINERS: Change maintainer of genwqe driver Gabriel won't maintain this driver anymore. So, I'll maintain it with Frank. Thanks Gabriel for all your work on genwqe. Signed-off-by: Guilherme G. Piccoli Acked-by: Gabriel Krisman Bertazi Acked-by: Frank Haverkamp Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9e984645c4b0..4ee8967a1e4a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5622,7 +5622,7 @@ F: scripts/get_maintainer.pl GENWQE (IBM Generic Workqueue Card) M: Frank Haverkamp -M: Gabriel Krisman Bertazi +M: Guilherme G. Piccoli S: Supported F: drivers/misc/genwqe/ From 370d9192719e6c174167888cf9240df2542e3b4b Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 24 May 2017 18:34:29 +0200 Subject: [PATCH 0177/1065] clk: sunxi-ng: sun5i: Fix ahb_bist_clk definition AHB BIST gate is actually controlled with bit 7. This bug was detected while trying to use the NAND controller which is using the DMA engine to transfer data to the NAND. Since the ahb_bist_clk gate bit conflicts with the ahb_dma_clk gate bit, the core was disabling the DMA engine clock as part of its 'disable unused clks' procedure, which was causing all DMA transfers to fail after this point. Fixes: 5e73761786d6 ("clk: sunxi-ng: Add sun5i CCU driver") Cc: stable@vger.kernel.org Reported-by: Angus Ainslie Signed-off-by: Boris Brezillon Tested-by: Angus Ainslie Reviewed-by: Chen-Yu Tsai Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/1495643669-28221-1-git-send-email-boris.brezillon@free-electrons.com --- drivers/clk/sunxi-ng/ccu-sun5i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun5i.c b/drivers/clk/sunxi-ng/ccu-sun5i.c index 5c476f966a72..5372bf8be5e6 100644 --- a/drivers/clk/sunxi-ng/ccu-sun5i.c +++ b/drivers/clk/sunxi-ng/ccu-sun5i.c @@ -243,7 +243,7 @@ static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb", static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb", 0x060, BIT(6), 0); static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb", - 0x060, BIT(6), 0); + 0x060, BIT(7), 0); static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb", 0x060, BIT(8), 0); static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb", From 5711ea1b5421cbc3f0e35162e3d9611b1a57544c Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 25 May 2017 01:06:50 +0200 Subject: [PATCH 0178/1065] arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner Signed-off-by: Olof Johansson --- arch/arm64/configs/defconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 65cdd878cfbd..97c123e09e45 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -68,6 +68,7 @@ CONFIG_PCIE_QCOM=y CONFIG_PCIE_ARMADA_8K=y CONFIG_PCI_AARDVARK=y CONFIG_PCIE_RCAR=y +CONFIG_PCIE_ROCKCHIP=m CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y CONFIG_ARM64_VA_BITS_48=y @@ -208,6 +209,8 @@ CONFIG_BRCMFMAC=m CONFIG_WL18XX=m CONFIG_WLCORE_SDIO=m CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_ADC=m +CONFIG_KEYBOARD_CROS_EC=y CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8941_PWRKEY=y @@ -263,6 +266,7 @@ CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_QUP=y +CONFIG_SPI_ROCKCHIP=y CONFIG_SPI_S3C64XX=y CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y @@ -292,6 +296,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_EXYNOS_THERMAL=y +CONFIG_ROCKCHIP_THERMAL=m CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MESON_GXBB_WATCHDOG=m @@ -300,12 +305,14 @@ CONFIG_RENESAS_WDT=y CONFIG_BCM2835_WDT=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_EXYNOS_LPASS=m CONFIG_MFD_HI655X_PMIC=y CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y +CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI655X=y @@ -473,8 +480,10 @@ CONFIG_ARCH_TEGRA_186_SOC=y CONFIG_EXTCON_USB_GPIO=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y +CONFIG_ROCKCHIP_SARADC=m CONFIG_PWM=y CONFIG_PWM_BCM2835=m +CONFIG_PWM_CROS_EC=m CONFIG_PWM_MESON=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y @@ -484,6 +493,7 @@ CONFIG_PHY_HI6220_USB=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_EMMC=y +CONFIG_PHY_ROCKCHIP_PCIE=m CONFIG_PHY_XGENE=y CONFIG_PHY_TEGRA_XUSB=y CONFIG_ARM_SCPI_PROTOCOL=y From 791229f1d530a0f0a680a4c09f98199792485f33 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Wed, 29 Mar 2017 16:02:18 +0530 Subject: [PATCH 0179/1065] ARM: dts: keystone-k2l: fix broken Ethernet due to disabled OSR Ethernet networking on K2L has been broken since v4.11-rc1. This was caused by commit 32a34441a9bd ("ARM: keystone: dts: fix netcp clocks and add names"). This commit inadvertently moves on-chip static RAM clock to the end of list of clocks provided for netcp. Since keystone PM domain support does not have a list of recognized con_ids, only the first clock in the list comes under runtime PM management. This means the OSR (On-chip Static RAM) clock remains disabled and that broke networking on K2L. The OSR is used by QMSS on K2L as an external linking RAM. However this is a standalone RAM that can be used for non-QMSS usage (as well as from DSP side). So add a SRAM device node for the same and add the OSR clock to the node. Remove the now redundant OSR clock node from netcp. To manage all clocks defined for netCP's use by runtime PM needs keystone generic power domain (genpd) driver support which is under works. Meanwhile, this patch restores K2L networking and is correct irrespective of any future genpd work since OSR is an independent module and not part of NetCP anyway. Signed-off-by: Murali Karicheri Acked-by: Tero Kristo [nsekhar@ti.com: commit message updates, port to latest mainline] Signed-off-by: Sekhar Nori Cc: stable@vger.kernel.org # for 4.11 Acked-by: Santosh Shilimkar Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/keystone-k2l-netcp.dtsi | 4 ++-- arch/arm/boot/dts/keystone-k2l.dtsi | 8 ++++++++ 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index b6f26824e83a..66f615a74118 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -137,8 +137,8 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>; - clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk"; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; + clock-names = "pa_clk", "ethss_clk", "cpts"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index b58e7ebc0919..148650406cf7 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -232,6 +232,14 @@ }; }; + osr: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x70000000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clkosr>; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; From 9bd9590997b92fbd79fd028f704f6c584b4439d7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 27 Apr 2017 19:02:22 +0300 Subject: [PATCH 0180/1065] drm/i915: Stop pretending to mask/unmask LPE audio interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit vlv_display_irq_postinstall() enables the LPE audio interrupts regardless of whether the LPE audio irq chip has masked/unmasked them. Also the irqchip masking/unmasking doesn't consider the state of the display power well or the device, and hence just leads to dmesg spew when it tries to access the hardware while it's powered down. If the current way works, then we don't need to do anything in the mask/unmask hooks. If it doesn't work, well, then we'd need to properly track whether the irqchip has masked/unmasked the interrupts when we enable display interrupts. And the mask/unmask hooks would need to check whether display interrupts are even enabled before frobbing with he registers. So let's just assume the current way works and neuter the mask/unmask hooks. Also clean up vlv_display_irq_postinstall() a bit and stop it from trying to unmask/enable the LPE C interrupt on VLV since it doesn't exist. Cc: Takashi Iwai Cc: Pierre-Louis Bossart Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-4-ville.syrjala@linux.intel.com Reviewed-by: Takashi Iwai (cherry picked from commit ebf5f921478b9b55ed4e634b994571dd23a8fca3) Reference: http://mid.mail-archive.com/874cf6d3-4e45-d4cf-e662-eb972490d2ce@redhat.com Tested-by: Hans de Goede Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_irq.c | 15 +++++------ drivers/gpu/drm/i915/intel_lpe_audio.c | 36 -------------------------- 2 files changed, 6 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index fd97fe00cd0d..190f6aa5d15e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2953,7 +2953,6 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) u32 pipestat_mask; u32 enable_mask; enum pipe pipe; - u32 val; pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV | PIPE_CRC_DONE_INTERRUPT_STATUS; @@ -2964,18 +2963,16 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) enable_mask = I915_DISPLAY_PORT_INTERRUPT | I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | + I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT; + if (IS_CHERRYVIEW(dev_priv)) - enable_mask |= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT; + enable_mask |= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT | + I915_LPE_PIPE_C_INTERRUPT; WARN_ON(dev_priv->irq_mask != ~0); - val = (I915_LPE_PIPE_A_INTERRUPT | - I915_LPE_PIPE_B_INTERRUPT | - I915_LPE_PIPE_C_INTERRUPT); - - enable_mask |= val; - dev_priv->irq_mask = ~enable_mask; GEN5_IRQ_INIT(VLV_, dev_priv->irq_mask, enable_mask); diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 668f00480d97..292fedf30b00 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -149,44 +149,10 @@ static void lpe_audio_platdev_destroy(struct drm_i915_private *dev_priv) static void lpe_audio_irq_unmask(struct irq_data *d) { - struct drm_i915_private *dev_priv = d->chip_data; - unsigned long irqflags; - u32 val = (I915_LPE_PIPE_A_INTERRUPT | - I915_LPE_PIPE_B_INTERRUPT); - - if (IS_CHERRYVIEW(dev_priv)) - val |= I915_LPE_PIPE_C_INTERRUPT; - - spin_lock_irqsave(&dev_priv->irq_lock, irqflags); - - dev_priv->irq_mask &= ~val; - I915_WRITE(VLV_IIR, val); - I915_WRITE(VLV_IIR, val); - I915_WRITE(VLV_IMR, dev_priv->irq_mask); - POSTING_READ(VLV_IMR); - - spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } static void lpe_audio_irq_mask(struct irq_data *d) { - struct drm_i915_private *dev_priv = d->chip_data; - unsigned long irqflags; - u32 val = (I915_LPE_PIPE_A_INTERRUPT | - I915_LPE_PIPE_B_INTERRUPT); - - if (IS_CHERRYVIEW(dev_priv)) - val |= I915_LPE_PIPE_C_INTERRUPT; - - spin_lock_irqsave(&dev_priv->irq_lock, irqflags); - - dev_priv->irq_mask |= val; - I915_WRITE(VLV_IMR, dev_priv->irq_mask); - I915_WRITE(VLV_IIR, val); - I915_WRITE(VLV_IIR, val); - POSTING_READ(VLV_IIR); - - spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } static struct irq_chip lpe_audio_irqchip = { @@ -330,8 +296,6 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) desc = irq_to_desc(dev_priv->lpe_audio.irq); - lpe_audio_irq_mask(&desc->irq_data); - lpe_audio_platdev_destroy(dev_priv); irq_free_desc(dev_priv->lpe_audio.irq); From e8a3ce1130134046e9da132aa4d043566df8237d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 26 May 2017 01:44:19 +0000 Subject: [PATCH 0181/1065] ASoC: rsnd: fixup parent_clk_name of AUDIO_CLKOUTx commit 25165f79adc7 ("ASoC: rsnd: enable clock-frequency for both 44.1kHz/48kHz") supported both 44.1kHz/48kHz for AUDIO_CLKOUTx, but it didn't care its parent clock name. This patch fixes it. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/adg.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c index 66203d107a11..d3b0dc145a56 100644 --- a/sound/soc/sh/rcar/adg.c +++ b/sound/soc/sh/rcar/adg.c @@ -507,7 +507,8 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, rbga = rbgx; adg->rbga_rate_for_441khz = rate / div; ckr |= brg_table[i] << 20; - if (req_441kHz_rate) + if (req_441kHz_rate && + !(adg_mode_flags(adg) & AUDIO_OUT_48)) parent_clk_name = __clk_get_name(clk); } } @@ -522,7 +523,8 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, rbgb = rbgx; adg->rbgb_rate_for_48khz = rate / div; ckr |= brg_table[i] << 16; - if (req_48kHz_rate) + if (req_48kHz_rate && + (adg_mode_flags(adg) & AUDIO_OUT_48)) parent_clk_name = __clk_get_name(clk); } } From 56b74ed9c1e8050408b9beeee25888a49a458997 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Mon, 22 May 2017 11:01:52 +0200 Subject: [PATCH 0182/1065] ARM: dts: am335x-sl50: Fix card detect pin for mmc1 The second version of the hardware moved the card detect pin from gpio0_6 to gpio1_9, as we won't support the first hardware version fix the pinmux configuration of this pin. Fixes: 8584d4fc ("ARM: dts: am335x-sl50: Add Toby-Churchill SL50 board support.") Cc: # 4.11 Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-sl50.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index c5d2589c55fc..da4f8e376b9f 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -220,7 +220,7 @@ mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ >; }; @@ -384,7 +384,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; bus-width = <4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; vmmc-supply = <&vmmcsd_fixed>; }; From db145db99f5bf30acc12d7450b9ad0707072a7be Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Mon, 22 May 2017 11:01:53 +0200 Subject: [PATCH 0183/1065] ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0 We don't need to bitbang these pins anymore, instead we muxed these pins as SPI, after this change, done in commit 6c69f726, we introduced the following error: pinctrl-single 44e10800.pinmux: pin PIN85 already requested \ by 44e10800.pinmux; cannot claim for 48030000.spi pinctrl-single 44e10800.pinmux: pin-85 (48030000.spi) status -22 Fixes: 6c69f726 ("ARM: dts: am335x-sl50: Enable SPI0 interface and Flash Memory") Cc: # 4.11 Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-sl50.dts | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index da4f8e376b9f..fc864a855991 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -280,10 +280,6 @@ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ - /* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */ - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */ /* PDI Bus - Battery system */ AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ From 5acc1ca4fb15f00bfa3d4046e35ca381bc25d580 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Sat, 20 May 2017 20:32:32 -0700 Subject: [PATCH 0184/1065] KVM: X86: Fix preempt the preemption timer cancel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Preemption can occur during cancel preemption timer, and there will be inconsistent status in lapic, vmx and vmcs field. CPU0 CPU1 preemption timer vmexit handle_preemption_timer(vCPU0) kvm_lapic_expired_hv_timer vmx_cancel_hv_timer vmx->hv_deadline_tsc = -1 vmcs_clear_bits /* hv_timer_in_use still true */ sched_out sched_in kvm_arch_vcpu_load vmx_set_hv_timer write vmx->hv_deadline_tsc vmcs_set_bits /* back in kvm_lapic_expired_hv_timer */ hv_timer_in_use = false ... vmx_vcpu_run vmx_arm_hv_run write preemption timer deadline spurious preemption timer vmexit handle_preemption_timer(vCPU0) kvm_lapic_expired_hv_timer WARN_ON(!apic->lapic_timer.hv_timer_in_use); This can be reproduced sporadically during boot of L2 on a preemptible L1, causing a splat on L1. WARNING: CPU: 3 PID: 1952 at arch/x86/kvm/lapic.c:1529 kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm] CPU: 3 PID: 1952 Comm: qemu-system-x86 Not tainted 4.12.0-rc1+ #24 RIP: 0010:kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm] Call Trace: handle_preemption_timer+0xe/0x20 [kvm_intel] vmx_handle_exit+0xc9/0x15f0 [kvm_intel] ? lock_acquire+0xdb/0x250 ? lock_acquire+0xdb/0x250 ? kvm_arch_vcpu_ioctl_run+0xdf3/0x1ce0 [kvm] kvm_arch_vcpu_ioctl_run+0xe55/0x1ce0 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x8f/0x750 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL64_slow_path+0x25/0x25 This patch fixes it by disabling preemption while cancelling preemption timer. This way cancel_hv_timer is atomic with respect to kvm_arch_vcpu_load. Cc: Paolo Bonzini Cc: Radim Krčmář Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- arch/x86/kvm/lapic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index c329d2894905..6e6f345adfe6 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1495,8 +1495,10 @@ EXPORT_SYMBOL_GPL(kvm_lapic_hv_timer_in_use); static void cancel_hv_timer(struct kvm_lapic *apic) { + preempt_disable(); kvm_x86_ops->cancel_hv_timer(apic->vcpu); apic->lapic_timer.hv_timer_in_use = false; + preempt_enable(); } static bool start_hv_timer(struct kvm_lapic *apic) From e1d39b17e044e8ae819827810d87d809ba5f58c0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jan=20H=2E=20Sch=C3=B6nherr?= Date: Sat, 20 May 2017 13:22:56 +0200 Subject: [PATCH 0185/1065] KVM: nVMX: Fix handling of lmsw instruction MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The decision whether or not to exit from L2 to L1 on an lmsw instruction is based on bogus values: instead of using the information encoded within the exit qualification, it uses the data also used for the mov-to-cr instruction, which boils down to using whatever is in %eax at that point. Use the correct values instead. Without this fix, an L1 may not get notified when a 32-bit Linux L2 switches its secondary CPUs to protected mode; the L1 is only notified on the next modification of CR0. This short time window poses a problem, when there is some other reason to exit to L1 in between. Then, L2 will be resumed in real mode and chaos ensues. Signed-off-by: Jan H. Schönherr Reviewed-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 72f78396bc09..880f371705bc 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -7913,11 +7913,13 @@ static bool nested_vmx_exit_handled_cr(struct kvm_vcpu *vcpu, { unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION); int cr = exit_qualification & 15; - int reg = (exit_qualification >> 8) & 15; - unsigned long val = kvm_register_readl(vcpu, reg); + int reg; + unsigned long val; switch ((exit_qualification >> 4) & 3) { case 0: /* mov to cr */ + reg = (exit_qualification >> 8) & 15; + val = kvm_register_readl(vcpu, reg); switch (cr) { case 0: if (vmcs12->cr0_guest_host_mask & @@ -7972,6 +7974,7 @@ static bool nested_vmx_exit_handled_cr(struct kvm_vcpu *vcpu, * lmsw can change bits 1..3 of cr0, and only set bit 0 of * cr0. Other attempted changes are ignored, with no exit. */ + val = (exit_qualification >> LMSW_SOURCE_DATA_SHIFT) & 0x0f; if (vmcs12->cr0_guest_host_mask & 0xe & (val ^ vmcs12->cr0_read_shadow)) return true; From 52b5419016997f2960e9c8b6584c4acb3875d126 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jan=20H=2E=20Sch=C3=B6nherr?= Date: Sat, 20 May 2017 13:24:32 +0200 Subject: [PATCH 0186/1065] KVM: x86: Fix virtual wire mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Intel SDM says, that at most one LAPIC should be configured with ExtINT delivery. KVM configures all LAPICs this way. This causes pic_unlock() to kick the first available vCPU from the internal KVM data structures. If this vCPU is not the BSP, but some not-yet-booted AP, the BSP may never realize that there is an interrupt. Fix that by enabling ExtINT delivery only for the BSP. This allows booting a Linux guest without a TSC in the above situation. Otherwise the BSP gets stuck in calibrate_delay_converge(). Signed-off-by: Jan H. Schönherr Reviewed-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- arch/x86/kvm/lapic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 6e6f345adfe6..d24c8742d9b0 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1936,7 +1936,8 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) for (i = 0; i < KVM_APIC_LVT_NUM; i++) kvm_lapic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED); apic_update_lvtt(apic); - if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_LINT0_REENABLED)) + if (kvm_vcpu_is_reset_bsp(vcpu) && + kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_LINT0_REENABLED)) kvm_lapic_set_reg(apic, APIC_LVT0, SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT)); apic_manage_nmi_watchdog(apic, kvm_lapic_get_reg(apic, APIC_LVT0)); From 7485af89a6fd48f7e6fab2505d2364d1817723e6 Mon Sep 17 00:00:00 2001 From: Jane Chu Date: Thu, 25 May 2017 13:51:20 -0600 Subject: [PATCH 0187/1065] arch/sparc: increase CONFIG_NODES_SHIFT on SPARC64 to 5 SPARC M6-32 platform has (2^5) NUMA nodes, so need to bump up the CONFIG_NODES_SHIFT to 5. Orabug: 25577754 Signed-off-by: Jane Chu Reviewed-by: Bob Picco Reviewed-by: Atish Patra Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 58243b0d21c0..e544ac12737e 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -295,9 +295,13 @@ config NUMA depends on SPARC64 && SMP config NODES_SHIFT - int - default "4" + int "Maximum NUMA Nodes (as a power of 2)" + range 4 5 if SPARC64 + default "5" depends on NEED_MULTIPLE_NODES + help + Specify the maximum number of NUMA Nodes available on the target + system. Increases memory reserved to accommodate various tables. # Some NUMA nodes have memory ranges that span # other nodes. Even though a pfn is valid and From 449e2f9e95d803961635d725f6482e5e995b7554 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 23 May 2017 12:36:58 -0700 Subject: [PATCH 0188/1065] PCI: Make error code types consistent in pci_{read,write}_config_* Callers normally treat the config space accessors as returning PCBIOS_* error codes, not Linux error codes (or they don't look at them at all). We have pcibios_err_to_errno() in case the error code needs to be translated. Fixes: 4b1038834739 ("PCI: Don't attempt config access to disconnected devices") Signed-off-by: Brian Norris Signed-off-by: Bjorn Helgaas Reviewed-by: Keith Busch --- drivers/pci/access.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/pci/access.c b/drivers/pci/access.c index 74cf5fffb1e1..c80e37a69305 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -896,7 +896,7 @@ int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val) { if (pci_dev_is_disconnected(dev)) { *val = ~0; - return -ENODEV; + return PCIBIOS_DEVICE_NOT_FOUND; } return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val); } @@ -906,7 +906,7 @@ int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val) { if (pci_dev_is_disconnected(dev)) { *val = ~0; - return -ENODEV; + return PCIBIOS_DEVICE_NOT_FOUND; } return pci_bus_read_config_word(dev->bus, dev->devfn, where, val); } @@ -917,7 +917,7 @@ int pci_read_config_dword(const struct pci_dev *dev, int where, { if (pci_dev_is_disconnected(dev)) { *val = ~0; - return -ENODEV; + return PCIBIOS_DEVICE_NOT_FOUND; } return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val); } @@ -926,7 +926,7 @@ EXPORT_SYMBOL(pci_read_config_dword); int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val) { if (pci_dev_is_disconnected(dev)) - return -ENODEV; + return PCIBIOS_DEVICE_NOT_FOUND; return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val); } EXPORT_SYMBOL(pci_write_config_byte); @@ -934,7 +934,7 @@ EXPORT_SYMBOL(pci_write_config_byte); int pci_write_config_word(const struct pci_dev *dev, int where, u16 val) { if (pci_dev_is_disconnected(dev)) - return -ENODEV; + return PCIBIOS_DEVICE_NOT_FOUND; return pci_bus_write_config_word(dev->bus, dev->devfn, where, val); } EXPORT_SYMBOL(pci_write_config_word); @@ -943,7 +943,7 @@ int pci_write_config_dword(const struct pci_dev *dev, int where, u32 val) { if (pci_dev_is_disconnected(dev)) - return -ENODEV; + return PCIBIOS_DEVICE_NOT_FOUND; return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val); } EXPORT_SYMBOL(pci_write_config_dword); From 4f8caa60a5a13a78f26198618f21774bd6aa6498 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 26 May 2017 17:40:52 -0400 Subject: [PATCH 0189/1065] ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/extents.c | 80 ++++++++++++++++++++++------------------------- 1 file changed, 37 insertions(+), 43 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 2a97dff87b96..83a513efc824 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3413,13 +3413,13 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, struct ext4_sb_info *sbi; struct ext4_extent_header *eh; struct ext4_map_blocks split_map; - struct ext4_extent zero_ex; + struct ext4_extent zero_ex1, zero_ex2; struct ext4_extent *ex, *abut_ex; ext4_lblk_t ee_block, eof_block; unsigned int ee_len, depth, map_len = map->m_len; int allocated = 0, max_zeroout = 0; int err = 0; - int split_flag = 0; + int split_flag = EXT4_EXT_DATA_VALID2; ext_debug("ext4_ext_convert_to_initialized: inode %lu, logical" "block %llu, max_blocks %u\n", inode->i_ino, @@ -3436,7 +3436,8 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ex = path[depth].p_ext; ee_block = le32_to_cpu(ex->ee_block); ee_len = ext4_ext_get_actual_len(ex); - zero_ex.ee_len = 0; + zero_ex1.ee_len = 0; + zero_ex2.ee_len = 0; trace_ext4_ext_convert_to_initialized_enter(inode, map, ex); @@ -3576,62 +3577,52 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, if (ext4_encrypted_inode(inode)) max_zeroout = 0; - /* If extent is less than s_max_zeroout_kb, zeroout directly */ - if (max_zeroout && (ee_len <= max_zeroout)) { - err = ext4_ext_zeroout(inode, ex); - if (err) - goto out; - zero_ex.ee_block = ex->ee_block; - zero_ex.ee_len = cpu_to_le16(ext4_ext_get_actual_len(ex)); - ext4_ext_store_pblock(&zero_ex, ext4_ext_pblock(ex)); - - err = ext4_ext_get_access(handle, inode, path + depth); - if (err) - goto out; - ext4_ext_mark_initialized(ex); - ext4_ext_try_to_merge(handle, inode, path, ex); - err = ext4_ext_dirty(handle, inode, path + path->p_depth); - goto out; - } - /* - * four cases: + * five cases: * 1. split the extent into three extents. - * 2. split the extent into two extents, zeroout the first half. - * 3. split the extent into two extents, zeroout the second half. + * 2. split the extent into two extents, zeroout the head of the first + * extent. + * 3. split the extent into two extents, zeroout the tail of the second + * extent. * 4. split the extent into two extents with out zeroout. + * 5. no splitting needed, just possibly zeroout the head and / or the + * tail of the extent. */ split_map.m_lblk = map->m_lblk; split_map.m_len = map->m_len; - if (max_zeroout && (allocated > map->m_len)) { + if (max_zeroout && (allocated > split_map.m_len)) { if (allocated <= max_zeroout) { - /* case 3 */ - zero_ex.ee_block = - cpu_to_le32(map->m_lblk); - zero_ex.ee_len = cpu_to_le16(allocated); - ext4_ext_store_pblock(&zero_ex, - ext4_ext_pblock(ex) + map->m_lblk - ee_block); - err = ext4_ext_zeroout(inode, &zero_ex); + /* case 3 or 5 */ + zero_ex1.ee_block = + cpu_to_le32(split_map.m_lblk + + split_map.m_len); + zero_ex1.ee_len = + cpu_to_le16(allocated - split_map.m_len); + ext4_ext_store_pblock(&zero_ex1, + ext4_ext_pblock(ex) + split_map.m_lblk + + split_map.m_len - ee_block); + err = ext4_ext_zeroout(inode, &zero_ex1); if (err) goto out; - split_map.m_lblk = map->m_lblk; split_map.m_len = allocated; - } else if (map->m_lblk - ee_block + map->m_len < max_zeroout) { - /* case 2 */ - if (map->m_lblk != ee_block) { - zero_ex.ee_block = ex->ee_block; - zero_ex.ee_len = cpu_to_le16(map->m_lblk - + } + if (split_map.m_lblk - ee_block + split_map.m_len < + max_zeroout) { + /* case 2 or 5 */ + if (split_map.m_lblk != ee_block) { + zero_ex2.ee_block = ex->ee_block; + zero_ex2.ee_len = cpu_to_le16(split_map.m_lblk - ee_block); - ext4_ext_store_pblock(&zero_ex, + ext4_ext_store_pblock(&zero_ex2, ext4_ext_pblock(ex)); - err = ext4_ext_zeroout(inode, &zero_ex); + err = ext4_ext_zeroout(inode, &zero_ex2); if (err) goto out; } + split_map.m_len += split_map.m_lblk - ee_block; split_map.m_lblk = ee_block; - split_map.m_len = map->m_lblk - ee_block + map->m_len; allocated = map->m_len; } } @@ -3642,8 +3633,11 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, err = 0; out: /* If we have gotten a failure, don't zero out status tree */ - if (!err) - err = ext4_zeroout_es(inode, &zero_ex); + if (!err) { + err = ext4_zeroout_es(inode, &zero_ex1); + if (!err) + err = ext4_zeroout_es(inode, &zero_ex2); + } return err ? err : allocated; } From a056bdaae7a181f7dcc876cfab2f94538e508709 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 26 May 2017 17:45:45 -0400 Subject: [PATCH 0190/1065] ext4: fix data corruption for mmap writes mpage_submit_page() can race with another process growing i_size and writing data via mmap to the written-back page. As mpage_submit_page() samples i_size too early, it may happen that ext4_bio_write_page() zeroes out too large tail of the page and thus corrupts user data. Fix the problem by sampling i_size only after the page has been write-protected in page tables by clear_page_dirty_for_io() call. Reported-by: Michael Zimmer CC: stable@vger.kernel.org Fixes: cb20d5188366f04d96d2e07b1240cc92170ade40 Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/inode.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 074aeba78259..657a98fa80b6 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2124,15 +2124,29 @@ static int ext4_writepage(struct page *page, static int mpage_submit_page(struct mpage_da_data *mpd, struct page *page) { int len; - loff_t size = i_size_read(mpd->inode); + loff_t size; int err; BUG_ON(page->index != mpd->first_page); + clear_page_dirty_for_io(page); + /* + * We have to be very careful here! Nothing protects writeback path + * against i_size changes and the page can be writeably mapped into + * page tables. So an application can be growing i_size and writing + * data through mmap while writeback runs. clear_page_dirty_for_io() + * write-protects our page in page tables and the page cannot get + * written to again until we release page lock. So only after + * clear_page_dirty_for_io() we are safe to sample i_size for + * ext4_bio_write_page() to zero-out tail of the written page. We rely + * on the barrier provided by TestClearPageDirty in + * clear_page_dirty_for_io() to make sure i_size is really sampled only + * after page tables are updated. + */ + size = i_size_read(mpd->inode); if (page->index == size >> PAGE_SHIFT) len = size & ~PAGE_MASK; else len = PAGE_SIZE; - clear_page_dirty_for_io(page); err = ext4_bio_write_page(&mpd->io_submit, page, len, mpd->wbc, false); if (!err) mpd->wbc->nr_to_write--; From 5720acf4bfc142ba568d5b6782fceaf62ed15e0b Mon Sep 17 00:00:00 2001 From: Miroslav Benes Date: Fri, 26 May 2017 14:45:21 +0200 Subject: [PATCH 0191/1065] livepatch: Make livepatch dependent on !TRIM_UNUSED_KSYMS If TRIM_UNUSED_KSYMS is enabled, all unneeded exported symbols are made unexported. Two-pass build of the kernel is done to find out which symbols are needed based on a configuration. This effectively complicates things for out-of-tree modules. Livepatch exports functions to (un)register and enable/disable a live patch. The only in-tree module which uses these functions is a sample in samples/livepatch/. If the sample is disabled, the functions are trimmed and out-of-tree live patches cannot be built. Note that live patches are intended to be built out-of-tree. Suggested-by: Michal Marek Acked-by: Josh Poimboeuf Acked-by: Jessica Yu Signed-off-by: Miroslav Benes Signed-off-by: Jiri Kosina --- kernel/livepatch/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/livepatch/Kconfig b/kernel/livepatch/Kconfig index 045022557936..ec4565122e65 100644 --- a/kernel/livepatch/Kconfig +++ b/kernel/livepatch/Kconfig @@ -10,6 +10,7 @@ config LIVEPATCH depends on SYSFS depends on KALLSYMS_ALL depends on HAVE_LIVEPATCH + depends on !TRIM_UNUSED_KSYMS help Say Y here if you want to support kernel live patching. This option has no runtime impact until a kernel "patch" From b3addcf0d1f04f53fcc302577d5a5e964c18531a Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Thu, 25 May 2017 13:42:39 -0500 Subject: [PATCH 0192/1065] usb: musb: dsps: keep VBUS on for host-only mode Currently VBUS is turned off while a usb device is detached, and turned on again by the polling routine. This short period VBUS loss prevents usb modem to switch mode. VBUS should be constantly on for host-only mode, so this changes the driver to not turn off VBUS for host-only mode. Fixes: 2f3fd2c5bde1 ("usb: musb: Prepare dsps glue layer for PM runtime support") Cc: stable@vger.kernel.org #v4.11 Reported-by: Moreno Bartalucci Acked-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_dsps.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 9c7ee26ef388..bc6a9be2ccc5 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -245,6 +245,11 @@ static int dsps_check_status(struct musb *musb, void *unused) dsps_mod_timer_optional(glue); break; case OTG_STATE_A_WAIT_BCON: + /* keep VBUS on for host-only mode */ + if (musb->port_mode == MUSB_PORT_MODE_HOST) { + dsps_mod_timer_optional(glue); + break; + } musb_writeb(musb->mregs, MUSB_DEVCTL, 0); skip_session = 1; /* fall */ From 7b4500bc519686712471924972022df88b12ff93 Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Fri, 5 May 2017 15:44:17 +0530 Subject: [PATCH 0193/1065] perf annotate: Fix failure when filename has special chars When filename contains special chars, perf annotate fails with an error: $ perf annotate --vmlinux ./vmlinux\(test\) --stdio native_safe_halt sh: -c: line 0: syntax error near unexpected token `(' sh: -c: line 0: `objdump --start-address=0xffffffff8184e840 --stop-address=0xffffffff8184e848 -l -d --no-show-raw -S -C ./vmlinux(test) 2>/dev/null|grep -v ./vmlinux(test):|expand' Fix it by surrounding filename in double quotes. Signed-off-by: Ravi Bangoria Cc: Adam Stylinski Cc: Alexander Shishkin Cc: Christian Borntraeger Cc: Peter Zijlstra Cc: Taeung Song Link: http://lkml.kernel.org/r/20170505101417.2117-1-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/annotate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c index 683f8340460c..07d5608a675f 100644 --- a/tools/perf/util/annotate.c +++ b/tools/perf/util/annotate.c @@ -1429,7 +1429,7 @@ int symbol__disassemble(struct symbol *sym, struct map *map, const char *arch_na snprintf(command, sizeof(command), "%s %s%s --start-address=0x%016" PRIx64 " --stop-address=0x%016" PRIx64 - " -l -d %s %s -C %s 2>/dev/null|grep -v %s:|expand", + " -l -d %s %s -C \"%s\" 2>/dev/null|grep -v \"%s:\"|expand", objdump_path ? objdump_path : "objdump", disassembler_style ? "-M " : "", disassembler_style ? disassembler_style : "", From ac20fa0a96c32ff40c8a127dfd58140f1df44a9b Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 2 May 2017 12:39:53 -0400 Subject: [PATCH 0194/1065] drm/msm: select PM_OPP Otherwise, if nothing else enabled selects it, dev_pm_opp_of_add_table() will return -ENOTSUPP. Fixes: e2af8b6 ("drm/msm: gpu: Use OPP tables if we can") Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig index 5b8e23d051f2..0a31cd6d01ce 100644 --- a/drivers/gpu/drm/msm/Kconfig +++ b/drivers/gpu/drm/msm/Kconfig @@ -13,6 +13,7 @@ config DRM_MSM select QCOM_SCM select SND_SOC_HDMI_CODEC if SND_SOC select SYNC_FILE + select PM_OPP default y help DRM/KMS driver for MSM/snapdragon. From 786813c343cb619d23cb0990e152e350b826d810 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 3 May 2017 10:04:48 -0400 Subject: [PATCH 0195/1065] drm/msm/mdp5: use __drm_atomic_helper_plane_duplicate_state() Somehow the helper was never retrofitted for mdp5. Which meant when plane_state->fence was added, it could get copied into new state in mdp5_plane_duplicate_state(). If an update to disable the plane (for example on rmfb) managed to sneak in after an nonblock update had swapped state, but before it was committed, we'd get a splat: WARNING: CPU: 1 PID: 69 at ../drivers/gpu/drm/drm_atomic_helper.c:1061 drm_atomic_helper_wait_for_fences+0xe0/0xf8 Modules linked in: CPU: 1 PID: 69 Comm: kworker/1:1 Tainted: G W 4.11.0-rc8+ #1187 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: events drm_mode_rmfb_work_fn task: ffffffc036560d00 task.stack: ffffffc036550000 PC is at drm_atomic_helper_wait_for_fences+0xe0/0xf8 LR is at complete_commit.isra.1+0x44/0x1c0 pc : [] lr : [] pstate: 20000145 sp : ffffffc036553b60 x29: ffffffc036553b60 x28: ffffffc0264e6a00 x27: ffffffc035659000 x26: 0000000000000000 x25: ffffffc0240e8000 x24: 0000000000000038 x23: 0000000000000000 x22: ffffff800858f200 x21: ffffffc0240e8000 x20: ffffffc02f56a800 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: ffffffc00a192700 x13: 0000000000000004 x12: 0000000000000000 x11: ffffff80089a1690 x10: 00000000000008f0 x9 : ffffffc036553b20 x8 : ffffffc036561650 x7 : ffffffc03fe6cb40 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000002 x3 : ffffffc035659000 x2 : ffffffc0240e8c80 x1 : 0000000000000000 x0 : ffffffc02adbe588 ---[ end trace 13aeec77c3fb55e2 ]--- Call trace: Exception stack(0xffffffc036553990 to 0xffffffc036553ac0) 3980: 0000000000000000 0000008000000000 39a0: ffffffc036553b60 ffffff80084f6040 0000000000004ff0 0000000000000038 39c0: ffffffc0365539d0 ffffff800857e098 ffffffc036553a00 ffffff800857e1b0 39e0: ffffffc036553a10 ffffff800857c554 ffffffc0365e8400 ffffffc0365e8400 3a00: ffffffc036553a20 ffffff8008103358 000000000001aad7 ffffff800851b72c 3a20: ffffffc036553a50 ffffff80080e9228 ffffffc02adbe588 0000000000000000 3a40: ffffffc0240e8c80 ffffffc035659000 0000000000000002 0000000000000001 3a60: 0000000000000000 ffffffc03fe6cb40 ffffffc036561650 ffffffc036553b20 3a80: 00000000000008f0 ffffff80089a1690 0000000000000000 0000000000000004 3aa0: ffffffc00a192700 0000000000000000 0000000000000000 0000000000000000 [] drm_atomic_helper_wait_for_fences+0xe0/0xf8 [] complete_commit.isra.1+0x44/0x1c0 [] msm_atomic_commit+0x32c/0x350 [] drm_atomic_commit+0x50/0x60 [] drm_atomic_remove_fb+0x158/0x250 [] drm_framebuffer_remove+0x50/0x158 [] drm_mode_rmfb_work_fn+0x40/0x58 [] process_one_work+0x1d0/0x378 [] worker_thread+0x244/0x488 [] kthread+0xfc/0x128 [] ret_from_fork+0x10/0x50 Fixes: 9626014 ("drm/fence: add in-fences support") Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter Reported-by: Stanimir Varbanov Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index a38c5fe6cc19..30b4691f7b0d 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -225,9 +225,10 @@ mdp5_plane_duplicate_state(struct drm_plane *plane) mdp5_state = kmemdup(to_mdp5_plane_state(plane->state), sizeof(*mdp5_state), GFP_KERNEL); + if (!mdp5_state) + return NULL; - if (mdp5_state && mdp5_state->base.fb) - drm_framebuffer_reference(mdp5_state->base.fb); + __drm_atomic_helper_plane_duplicate_state(plane, &mdp5_state->base); return &mdp5_state->base; } From 134ccada7ac59156761ce05afd1c0b1d02ebd928 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 3 May 2017 10:43:14 -0400 Subject: [PATCH 0196/1065] drm/msm/gpu: check legacy clk names in get_clocks() Otherwise if someone was using old bindings with "core_clk" instead of "core" as the clock name, we'd never find it and gpu would be stuck at 27MHz (or whatever it's slowest rate is). Fixes: 98db803 ("msm/drm: gpu: Dynamically locate the clocks from the device tree") Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c index 97b9c38c6b3f..0fdc88d79ca8 100644 --- a/drivers/gpu/drm/msm/msm_gpu.c +++ b/drivers/gpu/drm/msm/msm_gpu.c @@ -549,9 +549,9 @@ static int get_clocks(struct platform_device *pdev, struct msm_gpu *gpu) gpu->grp_clks[i] = get_clock(dev, name); /* Remember the key clocks that we need to control later */ - if (!strcmp(name, "core")) + if (!strcmp(name, "core") || !strcmp(name, "core_clk")) gpu->core_clk = gpu->grp_clks[i]; - else if (!strcmp(name, "rbbmtimer")) + else if (!strcmp(name, "rbbmtimer") || !strcmp(name, "rbbmtimer_clk")) gpu->rbbmtimer_clk = gpu->grp_clks[i]; ++i; From 43523eba79bda8f5b4c27f8ffe20ea078d20113a Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 12 Apr 2017 12:11:58 -0700 Subject: [PATCH 0197/1065] drm/msm: Expose our reservation object when exporting a dmabuf. Without this, polling on the dma-buf (and presumably other devices synchronizing against our rendering) would return immediately, even while the BO was busy. Signed-off-by: Eric Anholt Reviewed-by: Daniel Vetter Cc: stable@vger.kernel.org Cc: Rob Clark Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.c | 1 + drivers/gpu/drm/msm/msm_drv.h | 1 + drivers/gpu/drm/msm/msm_gem_prime.c | 7 +++++++ 3 files changed, 9 insertions(+) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 87b5695d4034..9d498eb81906 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -830,6 +830,7 @@ static struct drm_driver msm_driver = { .prime_fd_to_handle = drm_gem_prime_fd_to_handle, .gem_prime_export = drm_gem_prime_export, .gem_prime_import = drm_gem_prime_import, + .gem_prime_res_obj = msm_gem_prime_res_obj, .gem_prime_pin = msm_gem_prime_pin, .gem_prime_unpin = msm_gem_prime_unpin, .gem_prime_get_sg_table = msm_gem_prime_get_sg_table, diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h index 28b6f9ba5066..1b26ca626528 100644 --- a/drivers/gpu/drm/msm/msm_drv.h +++ b/drivers/gpu/drm/msm/msm_drv.h @@ -224,6 +224,7 @@ struct sg_table *msm_gem_prime_get_sg_table(struct drm_gem_object *obj); void *msm_gem_prime_vmap(struct drm_gem_object *obj); void msm_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr); int msm_gem_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma); +struct reservation_object *msm_gem_prime_res_obj(struct drm_gem_object *obj); struct drm_gem_object *msm_gem_prime_import_sg_table(struct drm_device *dev, struct dma_buf_attachment *attach, struct sg_table *sg); int msm_gem_prime_pin(struct drm_gem_object *obj); diff --git a/drivers/gpu/drm/msm/msm_gem_prime.c b/drivers/gpu/drm/msm/msm_gem_prime.c index 60bb290700ce..13403c6da6c7 100644 --- a/drivers/gpu/drm/msm/msm_gem_prime.c +++ b/drivers/gpu/drm/msm/msm_gem_prime.c @@ -70,3 +70,10 @@ void msm_gem_prime_unpin(struct drm_gem_object *obj) if (!obj->import_attach) msm_gem_put_pages(obj); } + +struct reservation_object *msm_gem_prime_res_obj(struct drm_gem_object *obj) +{ + struct msm_gem_object *msm_obj = to_msm_bo(obj); + + return msm_obj->resv; +} From 3c30cc41a87880db86c343b8c9cc8bc2d3d36055 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 12 Apr 2017 12:12:00 -0700 Subject: [PATCH 0198/1065] drm/msm: Reuse dma_fence_release. If we follow the typical pattern of the base class being the first member, we can use the default dma_fence_free function. Signed-off-by: Eric Anholt Cc: Rob Clark Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_fence.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_fence.c b/drivers/gpu/drm/msm/msm_fence.c index 3f299c537b77..a2f89bac9c16 100644 --- a/drivers/gpu/drm/msm/msm_fence.c +++ b/drivers/gpu/drm/msm/msm_fence.c @@ -99,8 +99,8 @@ void msm_update_fence(struct msm_fence_context *fctx, uint32_t fence) } struct msm_fence { - struct msm_fence_context *fctx; struct dma_fence base; + struct msm_fence_context *fctx; }; static inline struct msm_fence *to_msm_fence(struct dma_fence *fence) @@ -130,19 +130,13 @@ static bool msm_fence_signaled(struct dma_fence *fence) return fence_completed(f->fctx, f->base.seqno); } -static void msm_fence_release(struct dma_fence *fence) -{ - struct msm_fence *f = to_msm_fence(fence); - kfree_rcu(f, base.rcu); -} - static const struct dma_fence_ops msm_fence_ops = { .get_driver_name = msm_fence_get_driver_name, .get_timeline_name = msm_fence_get_timeline_name, .enable_signaling = msm_fence_enable_signaling, .signaled = msm_fence_signaled, .wait = dma_fence_default_wait, - .release = msm_fence_release, + .release = dma_fence_free, }; struct dma_fence * From adcbae310f9ed84ef139e3fa6d7a7743d96c44c8 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Sun, 21 May 2017 12:05:07 -0400 Subject: [PATCH 0199/1065] drm/msm/mdp5: release hwpipe(s) for unused planes Otherwise, if userspace doesn't re-use a given plane, it's hwpipe(s) could stay permanently assigned. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index 30b4691f7b0d..7d3741215387 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -445,6 +445,10 @@ static int mdp5_plane_atomic_check_with_state(struct drm_crtc_state *crtc_state, mdp5_pipe_release(state->state, old_hwpipe); mdp5_pipe_release(state->state, old_right_hwpipe); } + } else { + mdp5_pipe_release(state->state, mdp5_state->hwpipe); + mdp5_pipe_release(state->state, mdp5_state->r_hwpipe); + mdp5_state->hwpipe = mdp5_state->r_hwpipe = NULL; } return 0; From c43dd227f411359802427da7aebe5da5b0e48e0e Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 24 May 2017 18:12:19 +0200 Subject: [PATCH 0200/1065] drm/msm: constify irq_domain_ops struct irq_domain_ops is not modified, so it can be made const. Signed-off-by: Tobias Klauser Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.c index f8f48d014978..9c34d7824988 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.c @@ -116,7 +116,7 @@ static int mdss_hw_irqdomain_map(struct irq_domain *d, unsigned int irq, return 0; } -static struct irq_domain_ops mdss_hw_irqdomain_ops = { +static const struct irq_domain_ops mdss_hw_irqdomain_ops = { .map = mdss_hw_irqdomain_map, .xlate = irq_domain_xlate_onecell, }; From 3cfac69cbd56e1a57a70bfbdb07560b788030404 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 17 Mar 2017 19:38:40 +0100 Subject: [PATCH 0201/1065] drm/msm: for array in-fences, check if all backing fences are from our own context before waiting Use the dma_fence_match_context helper to check if all backing fences are from our own context, in which case we don't have to wait. Signed-off-by: Philipp Zabel Cc: Rob Clark Cc: Gustavo Padovan [rebased on code-motion] Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_submit.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index 1c545ebe6a5a..8ac4ca443914 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -410,12 +410,11 @@ int msm_ioctl_gem_submit(struct drm_device *dev, void *data, if (!in_fence) return -EINVAL; - /* TODO if we get an array-fence due to userspace merging multiple - * fences, we need a way to determine if all the backing fences - * are from our own context.. + /* + * Wait if the fence is from a foreign context, or if the fence + * array contains any fence from a foreign context. */ - - if (in_fence->context != gpu->fctx->context) { + if (!dma_fence_match_context(in_fence, gpu->fctx->context)) { ret = dma_fence_wait(in_fence, true); if (ret) return ret; From 90dd57de4a043f642179b1323a31ca3ced826611 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Mon, 8 May 2017 14:34:57 -0600 Subject: [PATCH 0202/1065] drm/msm: Take the mutex before calling msm_gem_new_impl Amongst its other duties, msm_gem_new_impl adds the newly created GEM object to the shared inactive list which may also be actively modifiying the list during submission. All the paths to modify the list are protected by the mutex except for the one through msm_gem_import which can end up causing list corruption. Signed-off-by: Jordan Crouse [add extra WARN_ON(!mutex_is_locked(&dev->struct_mutex))] Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index 68e509b3b9e4..50289a23baf8 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -758,6 +758,8 @@ static int msm_gem_new_impl(struct drm_device *dev, struct msm_gem_object *msm_obj; bool use_vram = false; + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + switch (flags & MSM_BO_CACHE_MASK) { case MSM_BO_UNCACHED: case MSM_BO_CACHED: @@ -853,7 +855,11 @@ struct drm_gem_object *msm_gem_import(struct drm_device *dev, size = PAGE_ALIGN(dmabuf->size); + /* Take mutex so we can modify the inactive list in msm_gem_new_impl */ + mutex_lock(&dev->struct_mutex); ret = msm_gem_new_impl(dev, size, MSM_BO_WC, dmabuf->resv, &obj); + mutex_unlock(&dev->struct_mutex); + if (ret) goto fail; From d72fea538fe6d783c1e63a2fc304019abf4be93a Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Mon, 8 May 2017 14:34:58 -0600 Subject: [PATCH 0203/1065] drm/msm: Fix the check for the command size The overrun check for the size of submitted commands is off by one. It should allow the offset plus the size to be equal to the size of the memory object when the command stream is very tightly constructed. Signed-off-by: Jordan Crouse Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_submit.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index 8ac4ca443914..7832e6421d25 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -495,8 +495,9 @@ int msm_ioctl_gem_submit(struct drm_device *dev, void *data, goto out; } - if ((submit_cmd.size + submit_cmd.submit_offset) >= - msm_obj->base.size) { + if (!submit_cmd.size || + ((submit_cmd.size + submit_cmd.submit_offset) > + msm_obj->base.size)) { DRM_ERROR("invalid cmdstream size: %u\n", submit_cmd.size); ret = -EINVAL; goto out; From 6c713a3a23154f4f0c2217ea39811ebe443dafaa Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 26 May 2017 01:44:43 +0200 Subject: [PATCH 0204/1065] net: dsa: mv88e6xxx: Add eeprom-length to binding The binding documentation for the mv88e6xxx switch is missing the eeprom-length property, which has been implemented since May 2016, commit f8cd8753def0 ("dsa: mv88e6xxx: Handle eeprom-length property") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/dsa/marvell.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 7ef9dbb08957..1d4d0f49c9d0 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -26,6 +26,10 @@ Optional properties: - interrupt-controller : Indicates the switch is itself an interrupt controller. This is used for the PHY interrupts. #interrupt-cells = <2> : Controller uses two cells, number and flag +- eeprom-length : Set to the length of an EEPROM connected to the + switch. Must be set if the switch can not detect + the presence and/or size of a connected EEPROM, + otherwise optional. - mdio : Container of PHY and devices on the switches MDIO bus. - mdio? : Container of PHYs and devices on the external MDIO From fb3ce90b7d7761b6f7f28f0ff5c456ef6b5229a1 Mon Sep 17 00:00:00 2001 From: Firo Yang Date: Fri, 26 May 2017 22:37:38 +0800 Subject: [PATCH 0205/1065] hdlcdrv: Fix divide by zero in hdlcdrv_ioctl syszkaller fuzzer triggered a divide by zero, when set calibration through ioctl(). To fix it, test 'bitrate' if it is negative or 0, just return -EINVAL. Reported-by: Andrey Konovalov Signed-off-by: Firo Yang Signed-off-by: David S. Miller --- drivers/net/hamradio/hdlcdrv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c index 8c3633c1d078..97e3bc60c3e7 100644 --- a/drivers/net/hamradio/hdlcdrv.c +++ b/drivers/net/hamradio/hdlcdrv.c @@ -576,6 +576,8 @@ static int hdlcdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) case HDLCDRVCTL_CALIBRATE: if(!capable(CAP_SYS_RAWIO)) return -EPERM; + if (s->par.bitrate <= 0) + return -EINVAL; if (bi.data.calibrate > INT_MAX / s->par.bitrate) return -EINVAL; s->hdlctx.calibrate = bi.data.calibrate * s->par.bitrate / 16; From 1ea34adb87c969b89dfd83f1905a79161e9ada26 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 26 May 2017 12:36:47 +0100 Subject: [PATCH 0206/1065] efi: Don't issue error message when booted under Xen When booted as Xen dom0 there won't be an EFI memmap allocated. Avoid issuing an error message in this case: [ 0.144079] efi: Failed to allocate new EFI memmap Signed-off-by: Juergen Gross Signed-off-by: Matt Fleming Cc: # v4.9+ Cc: Ard Biesheuvel Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20170526113652.21339-2-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c index 26615991d69c..e0cf95a83f3f 100644 --- a/arch/x86/platform/efi/quirks.c +++ b/arch/x86/platform/efi/quirks.c @@ -360,6 +360,9 @@ void __init efi_free_boot_services(void) free_bootmem_late(start, size); } + if (!num_entries) + return; + new_size = efi.memmap.desc_size * num_entries; new_phys = efi_memmap_alloc(num_entries); if (!new_phys) { From 684e3f965d0be8c26fedefe94f637374242aba08 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 26 May 2017 12:36:48 +0100 Subject: [PATCH 0207/1065] efi: Remove duplicate 'const' specifiers gcc-7 shows these harmless warnings: drivers/firmware/efi/libstub/secureboot.c:19:27: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const efi_char16_t const efi_SecureBoot_name[] = { drivers/firmware/efi/libstub/secureboot.c:22:27: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] Removing one of the specifiers gives us the expected behavior. Signed-off-by: Arnd Bergmann Signed-off-by: Matt Fleming Reviewed-by: David Howells Acked-by: Ard Biesheuvel Cc: Josh Boyer Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Fixes: de8cb458625c ("efi: Get and store the secure boot status") Link: http://lkml.kernel.org/r/20170526113652.21339-3-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar --- drivers/firmware/efi/libstub/secureboot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/efi/libstub/secureboot.c b/drivers/firmware/efi/libstub/secureboot.c index 8c34d50a4d80..959777ec8a77 100644 --- a/drivers/firmware/efi/libstub/secureboot.c +++ b/drivers/firmware/efi/libstub/secureboot.c @@ -16,10 +16,10 @@ /* BIOS variables */ static const efi_guid_t efi_variable_guid = EFI_GLOBAL_VARIABLE_GUID; -static const efi_char16_t const efi_SecureBoot_name[] = { +static const efi_char16_t efi_SecureBoot_name[] = { 'S', 'e', 'c', 'u', 'r', 'e', 'B', 'o', 'o', 't', 0 }; -static const efi_char16_t const efi_SetupMode_name[] = { +static const efi_char16_t efi_SetupMode_name[] = { 'S', 'e', 't', 'u', 'p', 'M', 'o', 'd', 'e', 0 }; From 4e52797d2efefac3271abdc54439a3435abd77b9 Mon Sep 17 00:00:00 2001 From: Sai Praneeth Date: Fri, 26 May 2017 12:36:49 +0100 Subject: [PATCH 0208/1065] x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map Booting kexec kernel with "efi=old_map" in kernel command line hits kernel panic as shown below. BUG: unable to handle kernel paging request at ffff88007fe78070 IP: virt_efi_set_variable.part.7+0x63/0x1b0 PGD 7ea28067 PUD 7ea2b067 PMD 7ea2d067 PTE 0 [...] Call Trace: virt_efi_set_variable() efi_delete_dummy_variable() efi_enter_virtual_mode() start_kernel() x86_64_start_reservations() x86_64_start_kernel() start_cpu() [ efi=old_map was never intended to work with kexec. The problem with using efi=old_map is that the virtual addresses are assigned from the memory region used by other kernel mappings; vmalloc() space. Potentially there could be collisions when booting kexec if something else is mapped at the virtual address we allocated for runtime service regions in the initial boot - Matt Fleming ] Since kexec was never intended to work with efi=old_map, disable runtime services in kexec if booted with efi=old_map, so that we don't panic. Tested-by: Lee Chun-Yi Signed-off-by: Sai Praneeth Prakhya Signed-off-by: Matt Fleming Acked-by: Dave Young Cc: Ard Biesheuvel Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Ravi Shankar Cc: Ricardo Neri Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20170526113652.21339-4-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 7e76a4d8304b..43b96f5f78ba 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -828,9 +828,11 @@ static void __init kexec_enter_virtual_mode(void) /* * We don't do virtual mode, since we don't do runtime services, on - * non-native EFI + * non-native EFI. With efi=old_map, we don't do runtime services in + * kexec kernel because in the initial boot something else might + * have been mapped at these virtual addresses. */ - if (!efi_is_native()) { + if (!efi_is_native() || efi_enabled(EFI_OLD_MEMMAP)) { efi_memmap_unmap(); clear_bit(EFI_RUNTIME_SERVICES, &efi.flags); return; From 94133e46a0f5ca3f138479806104ab4a8cb0455e Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 26 May 2017 12:36:50 +0100 Subject: [PATCH 0209/1065] x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled For EFI with the 'efi=old_map' kernel option specified, the kernel will panic when KASLR is enabled: BUG: unable to handle kernel paging request at 000000007febd57e IP: 0x7febd57e PGD 1025a067 PUD 0 Oops: 0010 [#1] SMP Call Trace: efi_enter_virtual_mode() start_kernel() x86_64_start_reservations() x86_64_start_kernel() start_cpu() The root cause is that the identity mapping is not built correctly in the 'efi=old_map' case. On 'nokaslr' kernels, PAGE_OFFSET is 0xffff880000000000 which is PGDIR_SIZE aligned. We can borrow the PUD table from the direct mappings safely. Given a physical address X, we have pud_index(X) == pud_index(__va(X)). However, on KASLR kernels, PAGE_OFFSET is PUD_SIZE aligned. For a given physical address X, pud_index(X) != pud_index(__va(X)). We can't just copy the PGD entry from direct mapping to build identity mapping, instead we need to copy the PUD entries one by one from the direct mapping. Fix it. Signed-off-by: Baoquan He Signed-off-by: Matt Fleming Cc: Ard Biesheuvel Cc: Bhupesh Sharma Cc: Borislav Petkov Cc: Dave Young Cc: Frank Ramsay Cc: Kees Cook Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Russ Anderson Cc: Thomas Garnier Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20170526113652.21339-5-matt@codeblueprint.co.uk [ Fixed and reworded the changelog and code comments to be more readable. ] Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi_64.c | 79 ++++++++++++++++++++++++++++++---- 1 file changed, 71 insertions(+), 8 deletions(-) diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index c488625c9712..eb8dff15a7f6 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -71,11 +71,13 @@ static void __init early_code_mapping_set_exec(int executable) pgd_t * __init efi_call_phys_prolog(void) { - unsigned long vaddress; - pgd_t *save_pgd; + unsigned long vaddr, addr_pgd, addr_p4d, addr_pud; + pgd_t *save_pgd, *pgd_k, *pgd_efi; + p4d_t *p4d, *p4d_k, *p4d_efi; + pud_t *pud; int pgd; - int n_pgds; + int n_pgds, i, j; if (!efi_enabled(EFI_OLD_MEMMAP)) { save_pgd = (pgd_t *)read_cr3(); @@ -88,10 +90,49 @@ pgd_t * __init efi_call_phys_prolog(void) n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE); save_pgd = kmalloc_array(n_pgds, sizeof(*save_pgd), GFP_KERNEL); + /* + * Build 1:1 identity mapping for efi=old_map usage. Note that + * PAGE_OFFSET is PGDIR_SIZE aligned when KASLR is disabled, while + * it is PUD_SIZE ALIGNED with KASLR enabled. So for a given physical + * address X, the pud_index(X) != pud_index(__va(X)), we can only copy + * PUD entry of __va(X) to fill in pud entry of X to build 1:1 mapping. + * This means here we can only reuse the PMD tables of the direct mapping. + */ for (pgd = 0; pgd < n_pgds; pgd++) { - save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE); - vaddress = (unsigned long)__va(pgd * PGDIR_SIZE); - set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress)); + addr_pgd = (unsigned long)(pgd * PGDIR_SIZE); + vaddr = (unsigned long)__va(pgd * PGDIR_SIZE); + pgd_efi = pgd_offset_k(addr_pgd); + save_pgd[pgd] = *pgd_efi; + + p4d = p4d_alloc(&init_mm, pgd_efi, addr_pgd); + if (!p4d) { + pr_err("Failed to allocate p4d table!\n"); + goto out; + } + + for (i = 0; i < PTRS_PER_P4D; i++) { + addr_p4d = addr_pgd + i * P4D_SIZE; + p4d_efi = p4d + p4d_index(addr_p4d); + + pud = pud_alloc(&init_mm, p4d_efi, addr_p4d); + if (!pud) { + pr_err("Failed to allocate pud table!\n"); + goto out; + } + + for (j = 0; j < PTRS_PER_PUD; j++) { + addr_pud = addr_p4d + j * PUD_SIZE; + + if (addr_pud > (max_pfn << PAGE_SHIFT)) + break; + + vaddr = (unsigned long)__va(addr_pud); + + pgd_k = pgd_offset_k(vaddr); + p4d_k = p4d_offset(pgd_k, vaddr); + pud[j] = *pud_offset(p4d_k, vaddr); + } + } } out: __flush_tlb_all(); @@ -104,8 +145,11 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd) /* * After the lock is released, the original page table is restored. */ - int pgd_idx; + int pgd_idx, i; int nr_pgds; + pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; if (!efi_enabled(EFI_OLD_MEMMAP)) { write_cr3((unsigned long)save_pgd); @@ -115,9 +159,28 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd) nr_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE); - for (pgd_idx = 0; pgd_idx < nr_pgds; pgd_idx++) + for (pgd_idx = 0; pgd_idx < nr_pgds; pgd_idx++) { + pgd = pgd_offset_k(pgd_idx * PGDIR_SIZE); set_pgd(pgd_offset_k(pgd_idx * PGDIR_SIZE), save_pgd[pgd_idx]); + if (!(pgd_val(*pgd) & _PAGE_PRESENT)) + continue; + + for (i = 0; i < PTRS_PER_P4D; i++) { + p4d = p4d_offset(pgd, + pgd_idx * PGDIR_SIZE + i * P4D_SIZE); + + if (!(p4d_val(*p4d) & _PAGE_PRESENT)) + continue; + + pud = (pud_t *)p4d_page_vaddr(*p4d); + pud_free(&init_mm, pud); + } + + p4d = (p4d_t *)pgd_page_vaddr(*pgd); + p4d_free(&init_mm, p4d); + } + kfree(save_pgd); __flush_tlb_all(); From 7425826f4f7ac60f2538b06a7f0a5d1006405159 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Fri, 26 May 2017 12:36:51 +0100 Subject: [PATCH 0210/1065] efi/bgrt: Skip efi_bgrt_init() in case of non-EFI boot Sabrina Dubroca reported an early panic: BUG: unable to handle kernel paging request at ffffffffff240001 IP: efi_bgrt_init+0xdc/0x134 [...] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ... which was introduced by: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") The cause is that on this machine the firmware provides the EFI ACPI BGRT table even on legacy non-EFI bootups - which table should be EFI only. The garbage BGRT data causes the efi_bgrt_init() panic. Add a check to skip efi_bgrt_init() in case non-EFI bootup to work around this firmware bug. Tested-by: Sabrina Dubroca Signed-off-by: Dave Young Signed-off-by: Ard Biesheuvel Signed-off-by: Matt Fleming Cc: # v4.11+ Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170526113652.21339-6-matt@codeblueprint.co.uk [ Rewrote the changelog to be more readable. ] Signed-off-by: Ingo Molnar --- drivers/firmware/efi/efi-bgrt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/firmware/efi/efi-bgrt.c b/drivers/firmware/efi/efi-bgrt.c index 04ca8764f0c0..8bf27323f7a3 100644 --- a/drivers/firmware/efi/efi-bgrt.c +++ b/drivers/firmware/efi/efi-bgrt.c @@ -36,6 +36,9 @@ void __init efi_bgrt_init(struct acpi_table_header *table) if (acpi_disabled) return; + if (!efi_enabled(EFI_BOOT)) + return; + if (table->length < sizeof(bgrt_tab)) { pr_notice("Ignoring BGRT: invalid length %u (expected %zu)\n", table->length, sizeof(bgrt_tab)); From 95264c8c6a9040e84edda883dbbe9d193c41f46c Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 27 May 2017 01:53:04 +0300 Subject: [PATCH 0211/1065] staging: iio: ad7152: Fix deadlock in ad7152_write_raw_samp_freq() ad7152_write_raw_samp_freq() is called by ad7152_write_raw() with chip->state_lock held. So, there is unavoidable deadlock when ad7152_write_raw_samp_freq() locks the mutex itself. The patch removes unneeded locking. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Fixes: 6572389bcc11 ("staging: iio: cdc: ad7152: Implement IIO_CHAN_INFO_SAMP_FREQ attribute") Acked-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron --- drivers/staging/iio/cdc/ad7152.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/staging/iio/cdc/ad7152.c b/drivers/staging/iio/cdc/ad7152.c index dc6ecd824365..ff10d1f0a7e4 100644 --- a/drivers/staging/iio/cdc/ad7152.c +++ b/drivers/staging/iio/cdc/ad7152.c @@ -231,16 +231,12 @@ static int ad7152_write_raw_samp_freq(struct device *dev, int val) if (i >= ARRAY_SIZE(ad7152_filter_rate_table)) i = ARRAY_SIZE(ad7152_filter_rate_table) - 1; - mutex_lock(&chip->state_lock); ret = i2c_smbus_write_byte_data(chip->client, AD7152_REG_CFG2, AD7152_CFG2_OSR(i)); - if (ret < 0) { - mutex_unlock(&chip->state_lock); + if (ret < 0) return ret; - } chip->filter_rate_setup = i; - mutex_unlock(&chip->state_lock); return ret; } From c21fbe29f8588991b4fbf209ad4f6ecd4b550cdb Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 28 May 2017 17:25:14 +0200 Subject: [PATCH 0212/1065] net: dsa: mv88e6xxx: Add missing static to stub functions Stub functions in header files need to be static, or we can have multiple definitions errors. Reported-by: kbuild test robot Fixes: 6335e9f2446b ("net: dsa: mv88e6xxx: mv88e6390X SERDES support") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/global2.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/global2.h b/drivers/net/dsa/mv88e6xxx/global2.h index 96046bb12ca1..d8d3c5abb2a1 100644 --- a/drivers/net/dsa/mv88e6xxx/global2.h +++ b/drivers/net/dsa/mv88e6xxx/global2.h @@ -114,13 +114,13 @@ static inline int mv88e6xxx_g2_set_eeprom16(struct mv88e6xxx_chip *chip, return -EOPNOTSUPP; } -int mv88e6xxx_g2_pvt_write(struct mv88e6xxx_chip *chip, int src_dev, - int src_port, u16 data) +static int mv88e6xxx_g2_pvt_write(struct mv88e6xxx_chip *chip, int src_dev, + int src_port, u16 data) { return -EOPNOTSUPP; } -int mv88e6xxx_g2_misc_4_bit_port(struct mv88e6xxx_chip *chip) +static int mv88e6xxx_g2_misc_4_bit_port(struct mv88e6xxx_chip *chip) { return -EOPNOTSUPP; } From fe3b81b446d4ecb954f1b9dd191164a78fd278ad Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 4 Apr 2017 17:08:42 -0700 Subject: [PATCH 0213/1065] NFS: Use ERR_CAST() to avoid cross-structure cast When the call to nfs_devname() fails, the error path attempts to retain the error via the mnt variable, but this requires a cast across very different types (char * to struct vfsmount *), which the upcoming structure layout randomization plugin flags as being potentially dangerous in the face of randomization. This is a false positive, but what this code actually wants to do is retain the error value, so this patch explicitly sets it, instead of using what seems to be an unexpected cast. Signed-off-by: Kees Cook Acked-by: Trond Myklebust Reviewed-by: Christoph Hellwig --- fs/nfs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 1a224a33a6c2..e5686be67be8 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -246,7 +246,7 @@ struct vfsmount *nfs_do_submount(struct dentry *dentry, struct nfs_fh *fh, devname = nfs_devname(dentry, page, PAGE_SIZE); if (IS_ERR(devname)) - mnt = (struct vfsmount *)devname; + mnt = ERR_CAST(devname); else mnt = nfs_do_clone_mount(NFS_SB(dentry->d_sb), devname, &mountdata); From fee2aa753823860f2b8dfe58d98cafe8e4840855 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 8 May 2017 14:45:26 -0700 Subject: [PATCH 0214/1065] ntfs: Use ERR_CAST() to avoid cross-structure cast When trying to propagate an error result, the error return path attempts to retain the error, but does this with an open cast across very different types, which the upcoming structure layout randomization plugin flags as being potentially dangerous in the face of randomization. This is a false positive, but what this code actually wants to do is use ERR_CAST() to retain the error value. Cc: Anton Altaparmakov Cc: Andrew Morton Signed-off-by: Kees Cook --- fs/ntfs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs/namei.c b/fs/ntfs/namei.c index 358258364616..4690cd75d8d7 100644 --- a/fs/ntfs/namei.c +++ b/fs/ntfs/namei.c @@ -159,7 +159,7 @@ static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent, PTR_ERR(dent_inode)); kfree(name); /* Return the error code. */ - return (struct dentry *)dent_inode; + return ERR_CAST(dent_inode); } /* It is guaranteed that @name is no longer allocated at this point. */ if (MREF_ERR(mref) == -ENOENT) { From 7585d12f6555fdf4faaefec34ac58b28555b27d0 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 8 May 2017 14:49:27 -0700 Subject: [PATCH 0215/1065] ocfs2: Use ERR_CAST() to avoid cross-structure cast When trying to propagate an error result, the error return path attempts to retain the error, but does this with an open cast across very different types, which the upcoming structure layout randomization plugin flags as being potentially dangerous in the face of randomization. This is a false positive, but what this code actually wants to do is use ERR_CAST() to retain the error value. Cc: Mark Fasheh Cc: Joel Becker Signed-off-by: Kees Cook --- fs/ocfs2/export.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c index 827fc9809bc2..9f88188060db 100644 --- a/fs/ocfs2/export.c +++ b/fs/ocfs2/export.c @@ -119,7 +119,7 @@ check_err: if (IS_ERR(inode)) { mlog_errno(PTR_ERR(inode)); - result = (void *)inode; + result = ERR_CAST(inode); goto bail; } From 234041dfe5ca83d5c8122ec1999eaf3f00335d7b Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 4 Apr 2017 22:07:10 -0700 Subject: [PATCH 0216/1065] sgi-xp: Use designated initializers Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. In this case, no initializers are needed (they can be NULL initialized and callers adjusted to check for NULL, which is more efficient than an indirect call). Cc: Robin Holt Signed-off-by: Kees Cook Reviewed-by: Christoph Hellwig --- drivers/misc/sgi-xp/xp.h | 12 +++++++++++- drivers/misc/sgi-xp/xp_main.c | 36 +++++++---------------------------- 2 files changed, 18 insertions(+), 30 deletions(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index c862cd4583cc..b8069eec18cb 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -309,6 +309,9 @@ static inline enum xp_retval xpc_send(short partid, int ch_number, u32 flags, void *payload, u16 payload_size) { + if (!xpc_interface.send) + return xpNotLoaded; + return xpc_interface.send(partid, ch_number, flags, payload, payload_size); } @@ -317,6 +320,9 @@ static inline enum xp_retval xpc_send_notify(short partid, int ch_number, u32 flags, void *payload, u16 payload_size, xpc_notify_func func, void *key) { + if (!xpc_interface.send_notify) + return xpNotLoaded; + return xpc_interface.send_notify(partid, ch_number, flags, payload, payload_size, func, key); } @@ -324,12 +330,16 @@ xpc_send_notify(short partid, int ch_number, u32 flags, void *payload, static inline void xpc_received(short partid, int ch_number, void *payload) { - return xpc_interface.received(partid, ch_number, payload); + if (xpc_interface.received) + xpc_interface.received(partid, ch_number, payload); } static inline enum xp_retval xpc_partid_to_nasids(short partid, void *nasids) { + if (!xpc_interface.partid_to_nasids) + return xpNotLoaded; + return xpc_interface.partid_to_nasids(partid, nasids); } diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index 01be66d02ca8..6d7f557fd1c1 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -69,23 +69,9 @@ struct xpc_registration xpc_registrations[XPC_MAX_NCHANNELS]; EXPORT_SYMBOL_GPL(xpc_registrations); /* - * Initialize the XPC interface to indicate that XPC isn't loaded. + * Initialize the XPC interface to NULL to indicate that XPC isn't loaded. */ -static enum xp_retval -xpc_notloaded(void) -{ - return xpNotLoaded; -} - -struct xpc_interface xpc_interface = { - (void (*)(int))xpc_notloaded, - (void (*)(int))xpc_notloaded, - (enum xp_retval(*)(short, int, u32, void *, u16))xpc_notloaded, - (enum xp_retval(*)(short, int, u32, void *, u16, xpc_notify_func, - void *))xpc_notloaded, - (void (*)(short, int, void *))xpc_notloaded, - (enum xp_retval(*)(short, void *))xpc_notloaded -}; +struct xpc_interface xpc_interface = { }; EXPORT_SYMBOL_GPL(xpc_interface); /* @@ -115,17 +101,7 @@ EXPORT_SYMBOL_GPL(xpc_set_interface); void xpc_clear_interface(void) { - xpc_interface.connect = (void (*)(int))xpc_notloaded; - xpc_interface.disconnect = (void (*)(int))xpc_notloaded; - xpc_interface.send = (enum xp_retval(*)(short, int, u32, void *, u16)) - xpc_notloaded; - xpc_interface.send_notify = (enum xp_retval(*)(short, int, u32, void *, - u16, xpc_notify_func, - void *))xpc_notloaded; - xpc_interface.received = (void (*)(short, int, void *)) - xpc_notloaded; - xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *)) - xpc_notloaded; + memset(&xpc_interface, 0, sizeof(xpc_interface)); } EXPORT_SYMBOL_GPL(xpc_clear_interface); @@ -188,7 +164,8 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size, mutex_unlock(®istration->mutex); - xpc_interface.connect(ch_number); + if (xpc_interface.connect) + xpc_interface.connect(ch_number); return xpSuccess; } @@ -237,7 +214,8 @@ xpc_disconnect(int ch_number) registration->assigned_limit = 0; registration->idle_limit = 0; - xpc_interface.disconnect(ch_number); + if (xpc_interface.disconnect) + xpc_interface.disconnect(ch_number); mutex_unlock(®istration->mutex); From 2a9d6d26e2b76eee1064d221b49f3ec527546c53 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Sat, 6 May 2017 00:54:07 -0700 Subject: [PATCH 0217/1065] drm/amdgpu: Use designated initializers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The randstruct plugin requires structures that are entirely function pointers be initialized using designated initializers. Cc: Alex Deucher Cc: Christian König Signed-off-by: Kees Cook --- drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c index a4831fe0223b..a2c59a08b2bd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c @@ -220,9 +220,9 @@ static void amdgpu_vram_mgr_debug(struct ttm_mem_type_manager *man, } const struct ttm_mem_type_manager_func amdgpu_vram_mgr_func = { - amdgpu_vram_mgr_init, - amdgpu_vram_mgr_fini, - amdgpu_vram_mgr_new, - amdgpu_vram_mgr_del, - amdgpu_vram_mgr_debug + .init = amdgpu_vram_mgr_init, + .takedown = amdgpu_vram_mgr_fini, + .get_node = amdgpu_vram_mgr_new, + .put_node = amdgpu_vram_mgr_del, + .debug = amdgpu_vram_mgr_debug }; From 3ddd396f6b57cbd5cb034498b5c4cd3dd920cf15 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Sat, 6 May 2017 01:09:00 -0700 Subject: [PATCH 0218/1065] drm/amd/powerplay: Use designated initializers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The randstruct plugin requires designated initializers for structures that are entirely function pointers. Cc: Christian König Cc: Eric Huang Cc: Alex Deucher Signed-off-by: Kees Cook --- .../drm/amd/powerplay/hwmgr/vega10_thermal.c | 20 +++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c index d5f53d04fa08..83e40fe51b62 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c @@ -709,17 +709,17 @@ static int tf_vega10_thermal_disable_alert(struct pp_hwmgr *hwmgr, static struct phm_master_table_item vega10_thermal_start_thermal_controller_master_list[] = { - {NULL, tf_vega10_thermal_initialize}, - {NULL, tf_vega10_thermal_set_temperature_range}, - {NULL, tf_vega10_thermal_enable_alert}, + { .tableFunction = tf_vega10_thermal_initialize }, + { .tableFunction = tf_vega10_thermal_set_temperature_range }, + { .tableFunction = tf_vega10_thermal_enable_alert }, /* We should restrict performance levels to low before we halt the SMC. * On the other hand we are still in boot state when we do this * so it would be pointless. * If this assumption changes we have to revisit this table. */ - {NULL, tf_vega10_thermal_setup_fan_table}, - {NULL, tf_vega10_thermal_start_smc_fan_control}, - {NULL, NULL} + { .tableFunction = tf_vega10_thermal_setup_fan_table }, + { .tableFunction = tf_vega10_thermal_start_smc_fan_control }, + { } }; static struct phm_master_table_header @@ -731,10 +731,10 @@ vega10_thermal_start_thermal_controller_master = { static struct phm_master_table_item vega10_thermal_set_temperature_range_master_list[] = { - {NULL, tf_vega10_thermal_disable_alert}, - {NULL, tf_vega10_thermal_set_temperature_range}, - {NULL, tf_vega10_thermal_enable_alert}, - {NULL, NULL} + { .tableFunction = tf_vega10_thermal_disable_alert }, + { .tableFunction = tf_vega10_thermal_set_temperature_range }, + { .tableFunction = tf_vega10_thermal_enable_alert }, + { } }; struct phm_master_table_header From 243dd05d39aa14fac2ffde75cc66dee3270896f8 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Sat, 6 May 2017 01:10:06 -0700 Subject: [PATCH 0219/1065] mtk-vcodec: Use designated initializers The randstruct plugin requires designated initializers for structures that are entirely function pointers. Cc: Wu-Cheng Li Cc: Tiffany Lin Cc: Hans Verkuil Cc: Mauro Carvalho Chehab Signed-off-by: Kees Cook --- drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 8 ++++---- drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 8 ++++---- drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c | 8 ++++---- 3 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c index 57a842ff3097..b7731b18ecae 100644 --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c @@ -493,10 +493,10 @@ static int vdec_h264_get_param(unsigned long h_vdec, } static struct vdec_common_if vdec_h264_if = { - vdec_h264_init, - vdec_h264_decode, - vdec_h264_get_param, - vdec_h264_deinit, + .init = vdec_h264_init, + .decode = vdec_h264_decode, + .get_param = vdec_h264_get_param, + .deinit = vdec_h264_deinit, }; struct vdec_common_if *get_h264_dec_comm_if(void); diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c index 6e7a62ae0842..b9fad6a48879 100644 --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c @@ -620,10 +620,10 @@ static void vdec_vp8_deinit(unsigned long h_vdec) } static struct vdec_common_if vdec_vp8_if = { - vdec_vp8_init, - vdec_vp8_decode, - vdec_vp8_get_param, - vdec_vp8_deinit, + .init = vdec_vp8_init, + .decode = vdec_vp8_decode, + .get_param = vdec_vp8_get_param, + .deinit = vdec_vp8_deinit, }; struct vdec_common_if *get_vp8_dec_comm_if(void); diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c index 5539b1853f16..1daee1207469 100644 --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c @@ -979,10 +979,10 @@ static int vdec_vp9_get_param(unsigned long h_vdec, } static struct vdec_common_if vdec_vp9_if = { - vdec_vp9_init, - vdec_vp9_decode, - vdec_vp9_get_param, - vdec_vp9_deinit, + .init = vdec_vp9_init, + .decode = vdec_vp9_decode, + .get_param = vdec_vp9_get_param, + .deinit = vdec_vp9_deinit, }; struct vdec_common_if *get_vp9_dec_comm_if(void); From 4013ef48798ae954530bdb8971d3794333e46526 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 8 Mar 2017 15:12:53 +0100 Subject: [PATCH 0220/1065] drm/exynos: Merge pre/postclose hooks Again no apparent explanation for the split except hysterical raisins. Cc: Inki Dae Cc: Joonyoung Shim Cc: Seung-Woo Kim Cc: Kyungmin Park Signed-off-by: Daniel Vetter Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_drv.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 09d3c4c3c858..50294a7bd29d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -82,14 +82,9 @@ err_file_priv_free: return ret; } -static void exynos_drm_preclose(struct drm_device *dev, - struct drm_file *file) -{ - exynos_drm_subdrv_close(dev, file); -} - static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file) { + exynos_drm_subdrv_close(dev, file); kfree(file->driver_priv); file->driver_priv = NULL; } @@ -145,7 +140,6 @@ static struct drm_driver exynos_drm_driver = { .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME | DRIVER_ATOMIC | DRIVER_RENDER, .open = exynos_drm_open, - .preclose = exynos_drm_preclose, .lastclose = exynos_drm_lastclose, .postclose = exynos_drm_postclose, .gem_free_object_unlocked = exynos_drm_gem_free_object, From f2921d8c4899a3d9d7c6326315c24efea2c9efd9 Mon Sep 17 00:00:00 2001 From: Hoegeun Kwon Date: Thu, 13 Apr 2017 15:05:26 +0900 Subject: [PATCH 0221/1065] drm/exynos: dsi: Fix the parse_dt function The dsi + panel is a parental relationship, so OF grpah is not needed. Therefore, the current dsi_parse_dt function will throw an error, because there is no linked OF graph for the case fimd + dsi + panel. Parse the Pll burst and esc clock frequency properties in dsi_parse_dt() and create a bridge_node only if there is an OF graph associated with dsi. Signed-off-by: Hoegeun Kwon Reviewed-by: Andrzej Hajda Reviewed-by: Andi Shyti Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index fc4fda738906..24ab77c674ec 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1633,7 +1633,6 @@ static int exynos_dsi_parse_dt(struct exynos_dsi *dsi) { struct device *dev = dsi->dev; struct device_node *node = dev->of_node; - struct device_node *ep; int ret; ret = exynos_dsi_of_read_u32(node, "samsung,pll-clock-frequency", @@ -1641,32 +1640,21 @@ static int exynos_dsi_parse_dt(struct exynos_dsi *dsi) if (ret < 0) return ret; - ep = of_graph_get_endpoint_by_regs(node, DSI_PORT_OUT, 0); - if (!ep) { - dev_err(dev, "no output port with endpoint specified\n"); - return -EINVAL; - } - - ret = exynos_dsi_of_read_u32(ep, "samsung,burst-clock-frequency", + ret = exynos_dsi_of_read_u32(node, "samsung,burst-clock-frequency", &dsi->burst_clk_rate); if (ret < 0) - goto end; + return ret; - ret = exynos_dsi_of_read_u32(ep, "samsung,esc-clock-frequency", + ret = exynos_dsi_of_read_u32(node, "samsung,esc-clock-frequency", &dsi->esc_clk_rate); if (ret < 0) - goto end; - - of_node_put(ep); + return ret; dsi->bridge_node = of_graph_get_remote_node(node, DSI_PORT_OUT, 0); if (!dsi->bridge_node) return -EINVAL; -end: - of_node_put(ep); - - return ret; + return 0; } static int exynos_dsi_bind(struct device *dev, struct device *master, From 70505c2ef94b7584dc24d6eaaeb0fc335b99813a Mon Sep 17 00:00:00 2001 From: Hoegeun Kwon Date: Fri, 26 May 2017 10:02:01 +0900 Subject: [PATCH 0222/1065] drm/exynos: dsi: Remove bridge node reference in removal Since bridge node is referenced during in the probe, it should be released on removal. Suggested-by: Andrzej Hajda Signed-off-by: Hoegeun Kwon Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 24ab77c674ec..d404de86d5f9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1805,6 +1805,10 @@ static int exynos_dsi_probe(struct platform_device *pdev) static int exynos_dsi_remove(struct platform_device *pdev) { + struct exynos_dsi *dsi = platform_get_drvdata(pdev); + + of_node_put(dsi->bridge_node); + pm_runtime_disable(&pdev->dev); component_del(&pdev->dev, &exynos_dsi_component_ops); From e379cbee79a8abb8e9b4da63187884939852ddb4 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 29 May 2017 09:59:05 +0900 Subject: [PATCH 0223/1065] drm/exynos: clean up description of exynos_drm_crtc This patch removes unnecessary descriptions on exynos_drm_crtc structure and adds one description which specifies what pipe_clk member does. pipe_clk support had been added by below patch without any description, drm/exynos: add support for pipeline clock to the framework Commit-id : f26b9343f582f44ec920474d71b4b2220b1ed9a8 Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_drv.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index cb3176930596..39c740572034 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -160,12 +160,9 @@ struct exynos_drm_clk { * drm framework doesn't support multiple irq yet. * we can refer to the crtc to current hardware interrupt occurred through * this pipe value. - * @enabled: if the crtc is enabled or not - * @event: vblank event that is currently queued for flip - * @wait_update: wait all pending planes updates to finish - * @pending_update: number of pending plane updates in this crtc * @ops: pointer to callbacks for exynos drm specific functionality * @ctx: A pointer to the crtc's implementation specific context + * @pipe_clk: A pointer to the crtc's pipeline clock. */ struct exynos_drm_crtc { struct drm_crtc base; From 2f2724630f7a8d582470f03ee56b96746767d270 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 22 May 2017 16:25:14 +1000 Subject: [PATCH 0224/1065] KVM: PPC: Book3S HV: Cope with host using large decrementer mode POWER9 introduces a new mode for the decrementer register, called large decrementer mode, in which the decrementer counter is 56 bits wide rather than 32, and reads are sign-extended rather than zero-extended. For the decrementer, this new mode is optional and controlled by a bit in the LPCR. The hypervisor decrementer (HDEC) is 56 bits wide on POWER9 and has no mode control. Since KVM code reads and writes the decrementer and hypervisor decrementer registers in a few places, it needs to be aware of the need to treat the decrementer value as a 64-bit quantity, and only do a 32-bit sign extension when large decrementer mode is not in effect. Similarly, the HDEC should always be treated as a 64-bit quantity on POWER9. We define a new EXTEND_HDEC macro to encapsulate the feature test for POWER9 and the sign extension. To enable the sign extension to be removed in large decrementer mode, we test the LPCR_LD bit in the host LPCR image stored in the struct kvm for the guest. If is set then large decrementer mode is enabled and the sign extension should be skipped. This is partly based on an earlier patch by Oliver O'Halloran. Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_hv_interrupts.S | 12 +++++++++++- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 23 +++++++++++++++++------ 2 files changed, 28 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S index 0fdc4a28970b..404deb512844 100644 --- a/arch/powerpc/kvm/book3s_hv_interrupts.S +++ b/arch/powerpc/kvm/book3s_hv_interrupts.S @@ -121,10 +121,20 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) * Put whatever is in the decrementer into the * hypervisor decrementer. */ +BEGIN_FTR_SECTION + ld r5, HSTATE_KVM_VCORE(r13) + ld r6, VCORE_KVM(r5) + ld r9, KVM_HOST_LPCR(r6) + andis. r9, r9, LPCR_LD@h +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) mfspr r8,SPRN_DEC mftb r7 - mtspr SPRN_HDEC,r8 +BEGIN_FTR_SECTION + /* On POWER9, don't sign-extend if host LPCR[LD] bit is set */ + bne 32f +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) extsw r8,r8 +32: mtspr SPRN_HDEC,r8 add r8,r8,r7 std r8,HSTATE_DECEXP(r13) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index bdb3f76ceb6b..e390b383b4d6 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -32,6 +32,12 @@ #include #include +/* Sign-extend HDEC if not on POWER9 */ +#define EXTEND_HDEC(reg) \ +BEGIN_FTR_SECTION; \ + extsw reg, reg; \ +END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) + #define VCPU_GPRS_TM(reg) (((reg) * ULONG_SIZE) + VCPU_GPR_TM) /* Values in HSTATE_NAPPING(r13) */ @@ -214,6 +220,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) kvmppc_primary_no_guest: /* We handle this much like a ceded vcpu */ /* put the HDEC into the DEC, since HDEC interrupts don't wake us */ + /* HDEC may be larger than DEC for arch >= v3.00, but since the */ + /* HDEC value came from DEC in the first place, it will fit */ mfspr r3, SPRN_HDEC mtspr SPRN_DEC, r3 /* @@ -295,8 +303,9 @@ kvm_novcpu_wakeup: /* See if our timeslice has expired (HDEC is negative) */ mfspr r0, SPRN_HDEC + EXTEND_HDEC(r0) li r12, BOOK3S_INTERRUPT_HV_DECREMENTER - cmpwi r0, 0 + cmpdi r0, 0 blt kvm_novcpu_exit /* Got an IPI but other vcpus aren't yet exiting, must be a latecomer */ @@ -390,8 +399,8 @@ kvm_secondary_got_guest: lbz r4, HSTATE_PTID(r13) cmpwi r4, 0 bne 63f - lis r6, 0x7fff - ori r6, r6, 0xffff + LOAD_REG_ADDR(r6, decrementer_max) + ld r6, 0(r6) mtspr SPRN_HDEC, r6 /* and set per-LPAR registers, if doing dynamic micro-threading */ ld r6, HSTATE_SPLIT_MODE(r13) @@ -968,7 +977,8 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300) /* Check if HDEC expires soon */ mfspr r3, SPRN_HDEC - cmpwi r3, 512 /* 1 microsecond */ + EXTEND_HDEC(r3) + cmpdi r3, 512 /* 1 microsecond */ blt hdec_soon #ifdef CONFIG_KVM_XICS @@ -2366,12 +2376,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) mfspr r3, SPRN_DEC mfspr r4, SPRN_HDEC mftb r5 - cmpw r3, r4 + extsw r3, r3 + EXTEND_HDEC(r4) + cmpd r3, r4 ble 67f mtspr SPRN_DEC, r4 67: /* save expiry time of guest decrementer */ - extsw r3, r3 add r3, r3, r5 ld r4, HSTATE_KVM_VCPU(r13) ld r5, HSTATE_KVM_VCORE(r13) From dac6ca243c4c49a9ca7507d3d66140ebfac8b04b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 28 May 2017 22:04:14 +0200 Subject: [PATCH 0225/1065] x86/microcode/AMD: Change load_microcode_amd()'s param to bool to fix preemptibility bug With CONFIG_DEBUG_PREEMPT enabled, I get: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2+ #2 Call Trace: dump_stack check_preemption_disabled debug_smp_processor_id save_microcode_in_initrd_amd ? microcode_init save_microcode_in_initrd ... because, well, it says it above, we're using smp_processor_id() in preemptible code. But passing the CPU number is not really needed. It is only used to determine whether we're on the BSP, and, if so, to save the microcode patch for early loading. [ We don't absolutely need to do it on the BSP but we do that customarily there. ] Instead, convert that function parameter to a boolean which denotes whether the patch should be saved or not, thereby avoiding the use of smp_processor_id() in preemptible code. Signed-off-by: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20170528200414.31305-1-bp@alien8.de Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/microcode/amd.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c index 45db4d2ebd01..e9f4d762aa5b 100644 --- a/arch/x86/kernel/cpu/microcode/amd.c +++ b/arch/x86/kernel/cpu/microcode/amd.c @@ -320,7 +320,7 @@ void load_ucode_amd_ap(unsigned int cpuid_1_eax) } static enum ucode_state -load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size); +load_microcode_amd(bool save, u8 family, const u8 *data, size_t size); int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax) { @@ -338,8 +338,7 @@ int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax) if (!desc.mc) return -EINVAL; - ret = load_microcode_amd(smp_processor_id(), x86_family(cpuid_1_eax), - desc.data, desc.size); + ret = load_microcode_amd(true, x86_family(cpuid_1_eax), desc.data, desc.size); if (ret != UCODE_OK) return -EINVAL; @@ -675,7 +674,7 @@ static enum ucode_state __load_microcode_amd(u8 family, const u8 *data, } static enum ucode_state -load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size) +load_microcode_amd(bool save, u8 family, const u8 *data, size_t size) { enum ucode_state ret; @@ -689,8 +688,8 @@ load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size) #ifdef CONFIG_X86_32 /* save BSP's matching patch for early load */ - if (cpu_data(cpu).cpu_index == boot_cpu_data.cpu_index) { - struct ucode_patch *p = find_patch(cpu); + if (save) { + struct ucode_patch *p = find_patch(0); if (p) { memset(amd_ucode_patch, 0, PATCH_MAX_SIZE); memcpy(amd_ucode_patch, p->data, min_t(u32, ksize(p->data), @@ -722,11 +721,12 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device, { char fw_name[36] = "amd-ucode/microcode_amd.bin"; struct cpuinfo_x86 *c = &cpu_data(cpu); + bool bsp = c->cpu_index == boot_cpu_data.cpu_index; enum ucode_state ret = UCODE_NFOUND; const struct firmware *fw; /* reload ucode container only on the boot cpu */ - if (!refresh_fw || c->cpu_index != boot_cpu_data.cpu_index) + if (!refresh_fw || !bsp) return UCODE_OK; if (c->x86 >= 0x15) @@ -743,7 +743,7 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device, goto fw_release; } - ret = load_microcode_amd(cpu, c->x86, fw->data, fw->size); + ret = load_microcode_amd(bsp, c->x86, fw->data, fw->size); fw_release: release_firmware(fw); From 5d9070b1f0fc9a159a9a3240c43004828408444b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 28 May 2017 11:03:42 +0200 Subject: [PATCH 0226/1065] x86/debug/32: Convert a smp_processor_id() call to raw to avoid DEBUG_PREEMPT warning ... to raw_smp_processor_id() to not trip the BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 check. The reasoning behind it is that __warn() already uses the raw_ variants but the show_regs() path on 32-bit doesn't. Signed-off-by: Borislav Petkov Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20170528092212.fiod7kygpjm23m3o@pd.tnic Signed-off-by: Ingo Molnar --- arch/x86/kernel/process_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index ff40e74c9181..ffeae818aa7a 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -78,7 +78,7 @@ void __show_regs(struct pt_regs *regs, int all) printk(KERN_DEFAULT "EIP: %pS\n", (void *)regs->ip); printk(KERN_DEFAULT "EFLAGS: %08lx CPU: %d\n", regs->flags, - smp_processor_id()); + raw_smp_processor_id()); printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", regs->ax, regs->bx, regs->cx, regs->dx); From cc7a938f5f308eeb6f8fe3cec28e1800aa81facb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 24 May 2017 17:39:03 +0200 Subject: [PATCH 0227/1065] ARM: at91: select CONFIG_ARM_CPU_SUSPEND The reference to cpu_resume requires the corresponding generic code to be enabled when CONFIG_PM is set: arch/arm/mach-at91/pm.o: In function `sama5d2_pm_init': pm.c:(.init.text+0x5e8): undefined reference to `cpu_resume' Fixes: 24a0f5c539f9 ("ARM: at91: pm: Add sama5d2 backup mode") Signed-off-by: Arnd Bergmann Signed-off-by: Alexandre Belloni --- arch/arm/mach-at91/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 841e924143f9..cbd959b73654 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,6 +1,7 @@ menuconfig ARCH_AT91 bool "Atmel SoCs" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 + select ARM_CPU_SUSPEND if PM select COMMON_CLK_AT91 select GPIOLIB select PINCTRL From 6ac56951dc10232e24419f6972fc8131dd0166e0 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 22 May 2017 19:59:24 +0200 Subject: [PATCH 0228/1065] rbd: implement REQ_OP_WRITE_ZEROES Commit 93c1defedcae ("rbd: remove the discard_zeroes_data flag") explicitly didn't implement REQ_OP_WRITE_ZEROES for rbd, while the following commit 48920ff2a5a9 ("block: remove the discard_zeroes_data flag") dropped ->discard_zeroes_data in favor of REQ_OP_WRITE_ZEROES. rbd does support efficient zeroing via CEPH_OSD_OP_ZERO opcode and will release either some or all blocks depending on whether the zeroing request is rbd_obj_bytes() aligned. This is how we currently implement discards, so REQ_OP_WRITE_ZEROES can be identical to REQ_OP_DISCARD for now. Caveats: - REQ_NOUNMAP is ignored, but AFAICT that's true of at least two other current implementations - nvme and loop - there is no ->write_zeroes_alignment and blk_bio_write_zeroes_split() is hence less helpful than blk_bio_discard_split(), but this can (and should) be fixed on the rbd side In the future we will split these into two code paths to respect REQ_NOUNMAP on zeroout and save on zeroing blocks that couldn't be released on discard. Fixes: 93c1defedcae ("rbd: remove the discard_zeroes_data flag") Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman Reviewed-by: Christoph Hellwig --- drivers/block/rbd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 454bf9c34882..c16f74547804 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4023,6 +4023,7 @@ static void rbd_queue_workfn(struct work_struct *work) switch (req_op(rq)) { case REQ_OP_DISCARD: + case REQ_OP_WRITE_ZEROES: op_type = OBJ_OP_DISCARD; break; case REQ_OP_WRITE: @@ -4420,6 +4421,7 @@ static int rbd_init_disk(struct rbd_device *rbd_dev) q->limits.discard_granularity = segment_size; q->limits.discard_alignment = segment_size; blk_queue_max_discard_sectors(q, segment_size / SECTOR_SIZE); + blk_queue_max_write_zeroes_sectors(q, segment_size / SECTOR_SIZE); if (!ceph_test_opt(rbd_dev->rbd_client->client, NOCRC)) q->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; From f3a1568582cc207663a4d5e37da790334372855b Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Wed, 24 May 2017 15:29:33 +0300 Subject: [PATCH 0229/1065] ovl: mark upper merge dir with type origin entries "impure" An upper dir is marked "impure" to let ovl_iterate() know that this directory may contain non pure upper entries whose d_ino may need to be read from the origin inode. We already mark a non-merge dir "impure" when moving a non-pure child entry inside it, to let ovl_iterate() know not to iterate the non-merge dir directly. Mark also a merge dir "impure" when moving a non-pure child entry inside it and when copying up a child entry inside it. This can be used to optimize ovl_iterate() to perform a "pure merge" of upper and lower directories, merging the content of the directories, without having to read d_ino from origin inodes. Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/copy_up.c | 5 +++++ fs/overlayfs/dir.c | 31 +++++------------------------ fs/overlayfs/namei.c | 20 ------------------- fs/overlayfs/overlayfs.h | 15 ++++++++++---- fs/overlayfs/super.c | 5 ++++- fs/overlayfs/util.c | 42 +++++++++++++++++++++++++++++++++------- 6 files changed, 60 insertions(+), 58 deletions(-) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index 843ed2a2d7db..7a44533f4bbf 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -459,6 +459,11 @@ static int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry, ovl_path_upper(parent, &parentpath); upperdir = parentpath.dentry; + /* Mark parent "impure" because it may now contain non-pure upper */ + err = ovl_set_impure(parent, upperdir); + if (err) + return err; + err = vfs_getattr(&parentpath, &pstat, STATX_ATIME | STATX_MTIME, AT_STATX_SYNC_AS_STAT); if (err) diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c index f2a118ba00e4..a63a71656e9b 100644 --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -149,22 +149,6 @@ static int ovl_set_opaque(struct dentry *dentry, struct dentry *upperdentry) return ovl_set_opaque_xerr(dentry, upperdentry, -EIO); } -static int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry) -{ - int err; - - /* - * Do not fail when upper doesn't support xattrs. - * Upper inodes won't have origin nor redirect xattr anyway. - */ - err = ovl_check_setxattr(dentry, upperdentry, OVL_XATTR_IMPURE, - "y", 1, 0); - if (!err) - ovl_dentry_set_impure(dentry); - - return err; -} - /* Common operations required to be done after creation of file on upper */ static void ovl_instantiate(struct dentry *dentry, struct inode *inode, struct dentry *newdentry, bool hardlink) @@ -976,21 +960,16 @@ static int ovl_rename(struct inode *olddir, struct dentry *old, if (!samedir) { /* * When moving a merge dir or non-dir with copy up origin into - * a non-merge upper dir (a.k.a pure upper dir), we are making - * the target parent dir "impure". ovl_iterate() iterates pure - * upper dirs directly, because there is no need to filter out - * whiteouts and merge dir content with lower dir. But for the - * case of an "impure" upper dir, ovl_iterate() cannot iterate - * the real directory directly, because it looks for the inode - * numbers to fill d_ino in the entries origin inode. + * a new parent, we are marking the new parent dir "impure". + * When ovl_iterate() iterates an "impure" upper dir, it will + * lookup the origin inodes of the entries to fill d_ino. */ - if (ovl_type_origin(old) && !ovl_type_merge(new->d_parent)) { + if (ovl_type_origin(old)) { err = ovl_set_impure(new->d_parent, new_upperdir); if (err) goto out_revert_creds; } - if (!overwrite && ovl_type_origin(new) && - !ovl_type_merge(old->d_parent)) { + if (!overwrite && ovl_type_origin(new)) { err = ovl_set_impure(old->d_parent, old_upperdir); if (err) goto out_revert_creds; diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c index 0c72a5909db2..f3136c31e72a 100644 --- a/fs/overlayfs/namei.c +++ b/fs/overlayfs/namei.c @@ -167,31 +167,11 @@ invalid: goto out; } -static bool ovl_check_dir_xattr(struct dentry *dentry, const char *name) -{ - int res; - char val; - - if (!d_is_dir(dentry)) - return false; - - res = vfs_getxattr(dentry, name, &val, 1); - if (res == 1 && val == 'y') - return true; - - return false; -} - static bool ovl_is_opaquedir(struct dentry *dentry) { return ovl_check_dir_xattr(dentry, OVL_XATTR_OPAQUE); } -static bool ovl_is_impuredir(struct dentry *dentry) -{ - return ovl_check_dir_xattr(dentry, OVL_XATTR_IMPURE); -} - static int ovl_lookup_single(struct dentry *base, struct ovl_lookup_data *d, const char *name, unsigned int namelen, size_t prelen, const char *post, diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h index a9fb958fd5d4..0623cebeefff 100644 --- a/fs/overlayfs/overlayfs.h +++ b/fs/overlayfs/overlayfs.h @@ -207,7 +207,6 @@ bool ovl_dentry_is_opaque(struct dentry *dentry); bool ovl_dentry_is_impure(struct dentry *dentry); bool ovl_dentry_is_whiteout(struct dentry *dentry); void ovl_dentry_set_opaque(struct dentry *dentry); -void ovl_dentry_set_impure(struct dentry *dentry); bool ovl_redirect_dir(struct super_block *sb); const char *ovl_dentry_get_redirect(struct dentry *dentry); void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect); @@ -221,6 +220,17 @@ bool ovl_is_whiteout(struct dentry *dentry); struct file *ovl_path_open(struct path *path, int flags); int ovl_copy_up_start(struct dentry *dentry); void ovl_copy_up_end(struct dentry *dentry); +bool ovl_check_dir_xattr(struct dentry *dentry, const char *name); +int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry, + const char *name, const void *value, size_t size, + int xerr); +int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry); + +static inline bool ovl_is_impuredir(struct dentry *dentry) +{ + return ovl_check_dir_xattr(dentry, OVL_XATTR_IMPURE); +} + /* namei.c */ int ovl_path_next(int idx, struct dentry *dentry, struct path *path); @@ -281,6 +291,3 @@ int ovl_copy_up(struct dentry *dentry); int ovl_copy_up_flags(struct dentry *dentry, int flags); int ovl_copy_xattr(struct dentry *old, struct dentry *new); int ovl_set_attr(struct dentry *upper, struct kstat *stat); -int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry, - const char *name, const void *value, size_t size, - int xerr); diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index f1647626a882..4882ffb37bae 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -974,7 +974,10 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent) path_put(&workpath); kfree(lowertmp); - oe->__upperdentry = upperpath.dentry; + if (upperpath.dentry) { + oe->__upperdentry = upperpath.dentry; + oe->impure = ovl_is_impuredir(upperpath.dentry); + } for (i = 0; i < numlower; i++) { oe->lowerstack[i].dentry = stack[i].dentry; oe->lowerstack[i].mnt = ufs->lower_mnt[i]; diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index e0dfb07d5457..809048913889 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -194,13 +194,6 @@ void ovl_dentry_set_opaque(struct dentry *dentry) oe->opaque = true; } -void ovl_dentry_set_impure(struct dentry *dentry) -{ - struct ovl_entry *oe = dentry->d_fsdata; - - oe->impure = true; -} - bool ovl_redirect_dir(struct super_block *sb) { struct ovl_fs *ofs = sb->s_fs_info; @@ -311,6 +304,21 @@ void ovl_copy_up_end(struct dentry *dentry) spin_unlock(&ofs->copyup_wq.lock); } +bool ovl_check_dir_xattr(struct dentry *dentry, const char *name) +{ + int res; + char val; + + if (!d_is_dir(dentry)) + return false; + + res = vfs_getxattr(dentry, name, &val, 1); + if (res == 1 && val == 'y') + return true; + + return false; +} + int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry, const char *name, const void *value, size_t size, int xerr) @@ -331,3 +339,23 @@ int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry, return err; } + +int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry) +{ + int err; + struct ovl_entry *oe = dentry->d_fsdata; + + if (oe->impure) + return 0; + + /* + * Do not fail when upper doesn't support xattrs. + * Upper inodes won't have origin nor redirect xattr anyway. + */ + err = ovl_check_setxattr(dentry, upperdentry, OVL_XATTR_IMPURE, + "y", 1, 0); + if (!err) + oe->impure = true; + + return err; +} From 118b90f3f18e733c99f0e8b98ea31a815ffc4d14 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 18 May 2017 14:10:22 +0300 Subject: [PATCH 0230/1065] drm/dp: add helper for reading DP sink/branch device desc from DPCD Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/acba54da7d80eafea9e59a893e27e3c31028c0ba.1495105635.git.jani.nikula@intel.com --- drivers/gpu/drm/drm_dp_helper.c | 35 +++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 19 ++++++++++++++++++ 2 files changed, 54 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 3e5f52110ea1..52e0ca9a5bb1 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -1208,3 +1208,38 @@ int drm_dp_stop_crc(struct drm_dp_aux *aux) return 0; } EXPORT_SYMBOL(drm_dp_stop_crc); + +/** + * drm_dp_read_desc - read sink/branch descriptor from DPCD + * @aux: DisplayPort AUX channel + * @desc: Device decriptor to fill from DPCD + * @is_branch: true for branch devices, false for sink devices + * + * Read DPCD 0x400 (sink) or 0x500 (branch) into @desc. Also debug log the + * identification. + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, + bool is_branch) +{ + struct drm_dp_dpcd_ident *ident = &desc->ident; + unsigned int offset = is_branch ? DP_BRANCH_OUI : DP_SINK_OUI; + int ret, dev_id_len; + + ret = drm_dp_dpcd_read(aux, offset, ident, sizeof(*ident)); + if (ret < 0) + return ret; + + dev_id_len = strnlen(ident->device_id, sizeof(ident->device_id)); + + DRM_DEBUG_KMS("DP %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d\n", + is_branch ? "branch" : "sink", + (int)sizeof(ident->oui), ident->oui, + dev_id_len, ident->device_id, + ident->hw_rev >> 4, ident->hw_rev & 0xf, + ident->sw_major_rev, ident->sw_minor_rev); + + return 0; +} +EXPORT_SYMBOL(drm_dp_read_desc); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index c0bd0d7651a9..84502da177a1 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -913,4 +913,23 @@ void drm_dp_aux_unregister(struct drm_dp_aux *aux); int drm_dp_start_crc(struct drm_dp_aux *aux, struct drm_crtc *crtc); int drm_dp_stop_crc(struct drm_dp_aux *aux); +struct drm_dp_dpcd_ident { + u8 oui[3]; + u8 device_id[6]; + u8 hw_rev; + u8 sw_major_rev; + u8 sw_minor_rev; +} __packed; + +/** + * struct drm_dp_desc - DP branch/sink device descriptor + * @ident: DP device identification from DPCD 0x400 (sink) or 0x500 (branch). + */ +struct drm_dp_desc { + struct drm_dp_dpcd_ident ident; +}; + +int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, + bool is_branch); + #endif /* _DRM_DP_HELPER_H_ */ From 84c367533bd24108e5392b355280647a4a2893ac Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 18 May 2017 14:10:23 +0300 Subject: [PATCH 0231/1065] drm/i915: use drm DP helper to read DPCD desc Switch to using the common DP helpers instead of using our own. v2: also remove leftover struct intel_dp_desc (Daniel) Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 37 ++++------------------------- drivers/gpu/drm/i915/intel_drv.h | 13 +--------- drivers/gpu/drm/i915/intel_lspcon.c | 2 +- 3 files changed, 6 insertions(+), 46 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index ee77b519835c..5ce45d98da78 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1507,37 +1507,6 @@ static void intel_dp_print_rates(struct intel_dp *intel_dp) DRM_DEBUG_KMS("common rates: %s\n", str); } -bool -__intel_dp_read_desc(struct intel_dp *intel_dp, struct intel_dp_desc *desc) -{ - u32 base = drm_dp_is_branch(intel_dp->dpcd) ? DP_BRANCH_OUI : - DP_SINK_OUI; - - return drm_dp_dpcd_read(&intel_dp->aux, base, desc, sizeof(*desc)) == - sizeof(*desc); -} - -bool intel_dp_read_desc(struct intel_dp *intel_dp) -{ - struct intel_dp_desc *desc = &intel_dp->desc; - bool oui_sup = intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & - DP_OUI_SUPPORT; - int dev_id_len; - - if (!__intel_dp_read_desc(intel_dp, desc)) - return false; - - dev_id_len = strnlen(desc->device_id, sizeof(desc->device_id)); - DRM_DEBUG_KMS("DP %s: OUI %*phD%s dev-ID %*pE HW-rev %d.%d SW-rev %d.%d\n", - drm_dp_is_branch(intel_dp->dpcd) ? "branch" : "sink", - (int)sizeof(desc->oui), desc->oui, oui_sup ? "" : "(NS)", - dev_id_len, desc->device_id, - desc->hw_rev >> 4, desc->hw_rev & 0xf, - desc->sw_major_rev, desc->sw_minor_rev); - - return true; -} - static int rate_to_index(int find, const int *rates) { int i = 0; @@ -3622,7 +3591,8 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp) if (!intel_dp_read_dpcd(intel_dp)) return false; - intel_dp_read_desc(intel_dp); + drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, + drm_dp_is_branch(intel_dp->dpcd)); if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) dev_priv->no_aux_handshake = intel_dp->dpcd[DP_MAX_DOWNSPREAD] & @@ -4624,7 +4594,8 @@ intel_dp_long_pulse(struct intel_connector *intel_connector) intel_dp_print_rates(intel_dp); - intel_dp_read_desc(intel_dp); + drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, + drm_dp_is_branch(intel_dp->dpcd)); intel_dp_configure_mst(intel_dp); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index aaee3949a422..f630c7af5020 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -906,14 +906,6 @@ enum link_m_n_set { M2_N2 }; -struct intel_dp_desc { - u8 oui[3]; - u8 device_id[6]; - u8 hw_rev; - u8 sw_major_rev; - u8 sw_minor_rev; -} __packed; - struct intel_dp_compliance_data { unsigned long edid; uint8_t video_pattern; @@ -957,7 +949,7 @@ struct intel_dp { /* Max link BW for the sink as per DPCD registers */ int max_sink_link_bw; /* sink or branch descriptor */ - struct intel_dp_desc desc; + struct drm_dp_desc desc; struct drm_dp_aux aux; enum intel_display_power_domain aux_power_domain; uint8_t train_set[4]; @@ -1532,9 +1524,6 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) } bool intel_dp_read_dpcd(struct intel_dp *intel_dp); -bool __intel_dp_read_desc(struct intel_dp *intel_dp, - struct intel_dp_desc *desc); -bool intel_dp_read_desc(struct intel_dp *intel_dp); int intel_dp_link_required(int pixel_clock, int bpp); int intel_dp_max_data_rate(int max_link_clock, int max_lanes); bool intel_digital_port_connected(struct drm_i915_private *dev_priv, diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c index 71cbe9c08932..5abef482eacf 100644 --- a/drivers/gpu/drm/i915/intel_lspcon.c +++ b/drivers/gpu/drm/i915/intel_lspcon.c @@ -240,7 +240,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port) return false; } - intel_dp_read_desc(dp); + drm_dp_read_desc(&dp->aux, &dp->desc, drm_dp_is_branch(dp->dpcd)); DRM_DEBUG_KMS("Success: LSPCON init\n"); return true; From 76fa998acd86b6b40d0217e12af39c2406bdcd2b Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 18 May 2017 14:10:24 +0300 Subject: [PATCH 0232/1065] drm/dp: start a DPCD based DP sink/branch device quirk database MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Face the fact, there are Display Port sink and branch devices out there in the wild that don't follow the Display Port specifications, or they have bugs, or just otherwise require special treatment. Start a common quirk database the drivers can query based on the DP device identification. At least for now, we leave the workarounds for the drivers to implement as they see fit. For starters, add a branch device that can't handle full 24-bit main link Mdiv and Ndiv main link attributes properly. Naturally, the workaround of reducing main link attributes for all devices ended up in regressions for other devices. So here we are. v2: Rebase on DRM DP desc read helpers v3: Fix the OUI memcmp blunder (Clint) Cc: Ville Syrjälä Cc: Dhinakaran Pandiyan Cc: Clint Taylor Cc: Adam Jackson Cc: Harry Wentland Tested-by: Clinton Taylor Reviewed-by: Clinton Taylor Reviewed-by: Daniel Vetter # v2 Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/91ec198dd95258dbf3bee2f6be739e0da73b4fdd.1495105635.git.jani.nikula@intel.com --- drivers/gpu/drm/drm_dp_helper.c | 52 +++++++++++++++++++++++++++++++-- include/drm/drm_dp_helper.h | 32 ++++++++++++++++++++ 2 files changed, 82 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 52e0ca9a5bb1..213fb837e1c4 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -1209,6 +1209,51 @@ int drm_dp_stop_crc(struct drm_dp_aux *aux) } EXPORT_SYMBOL(drm_dp_stop_crc); +struct dpcd_quirk { + u8 oui[3]; + bool is_branch; + u32 quirks; +}; + +#define OUI(first, second, third) { (first), (second), (third) } + +static const struct dpcd_quirk dpcd_quirk_list[] = { + /* Analogix 7737 needs reduced M and N at HBR2 link rates */ + { OUI(0x00, 0x22, 0xb9), true, BIT(DP_DPCD_QUIRK_LIMITED_M_N) }, +}; + +#undef OUI + +/* + * Get a bit mask of DPCD quirks for the sink/branch device identified by + * ident. The quirk data is shared but it's up to the drivers to act on the + * data. + * + * For now, only the OUI (first three bytes) is used, but this may be extended + * to device identification string and hardware/firmware revisions later. + */ +static u32 +drm_dp_get_quirks(const struct drm_dp_dpcd_ident *ident, bool is_branch) +{ + const struct dpcd_quirk *quirk; + u32 quirks = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(dpcd_quirk_list); i++) { + quirk = &dpcd_quirk_list[i]; + + if (quirk->is_branch != is_branch) + continue; + + if (memcmp(quirk->oui, ident->oui, sizeof(ident->oui)) != 0) + continue; + + quirks |= quirk->quirks; + } + + return quirks; +} + /** * drm_dp_read_desc - read sink/branch descriptor from DPCD * @aux: DisplayPort AUX channel @@ -1231,14 +1276,17 @@ int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, if (ret < 0) return ret; + desc->quirks = drm_dp_get_quirks(ident, is_branch); + dev_id_len = strnlen(ident->device_id, sizeof(ident->device_id)); - DRM_DEBUG_KMS("DP %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d\n", + DRM_DEBUG_KMS("DP %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n", is_branch ? "branch" : "sink", (int)sizeof(ident->oui), ident->oui, dev_id_len, ident->device_id, ident->hw_rev >> 4, ident->hw_rev & 0xf, - ident->sw_major_rev, ident->sw_minor_rev); + ident->sw_major_rev, ident->sw_minor_rev, + desc->quirks); return 0; } diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 84502da177a1..bb837310c07e 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -924,12 +924,44 @@ struct drm_dp_dpcd_ident { /** * struct drm_dp_desc - DP branch/sink device descriptor * @ident: DP device identification from DPCD 0x400 (sink) or 0x500 (branch). + * @quirks: Quirks; use drm_dp_has_quirk() to query for the quirks. */ struct drm_dp_desc { struct drm_dp_dpcd_ident ident; + u32 quirks; }; int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, bool is_branch); +/** + * enum drm_dp_quirk - Display Port sink/branch device specific quirks + * + * Display Port sink and branch devices in the wild have a variety of bugs, try + * to collect them here. The quirks are shared, but it's up to the drivers to + * implement workarounds for them. + */ +enum drm_dp_quirk { + /** + * @DP_DPCD_QUIRK_LIMITED_M_N: + * + * The device requires main link attributes Mvid and Nvid to be limited + * to 16 bits. + */ + DP_DPCD_QUIRK_LIMITED_M_N, +}; + +/** + * drm_dp_has_quirk() - does the DP device have a specific quirk + * @desc: Device decriptor filled by drm_dp_read_desc() + * @quirk: Quirk to query for + * + * Return true if DP device identified by @desc has @quirk. + */ +static inline bool +drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) +{ + return desc->quirks & BIT(quirk); +} + #endif /* _DRM_DP_HELPER_H_ */ From b31e85eda38c58cae986162ae2c462b53b0a2065 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 18 May 2017 14:10:25 +0300 Subject: [PATCH 0233/1065] drm/i915: Detect USB-C specific dongles before reducing M and N MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Analogix 7737 DP to HDMI converter requires reduced M and N values when to operate correctly at HBR2. We tried to reduce the M/N values for all devices in commit 9a86cda07af2 ("drm/i915/dp: reduce link M/N parameters"), but that regressed some other sinks. Detect this IC by its OUI value of 0x0022B9 via the DPCD quirk list, and only reduce the M/N values for that. v2 by Jani: Rebased on the DP quirk database v3 by Jani: Rebased on the reworked DP quirk database v4 by Jani: Improve commit message (Daniel) Fixes: 9a86cda07af2 ("drm/i915/dp: reduce link M/N parameters") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93578 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100755 Cc: Jani Nikula Cc: Dhinakaran Pandiyan Cc: Ville Syrjälä Reviewed-by: Daniel Vetter Signed-off-by: Clint Taylor Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/2d2e30f8f47d3f28c9b74ca2612336a54585c3ec.1495105635.git.jani.nikula@intel.com --- drivers/gpu/drm/i915/i915_drv.h | 3 ++- drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++++-------- drivers/gpu/drm/i915/intel_dp.c | 8 ++++++-- drivers/gpu/drm/i915/intel_dp_mst.c | 5 ++++- 4 files changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index c9b0949f6c1a..963f6d4481f7 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -562,7 +562,8 @@ struct intel_link_m_n { void intel_link_compute_m_n(int bpp, int nlanes, int pixel_clock, int link_clock, - struct intel_link_m_n *m_n); + struct intel_link_m_n *m_n, + bool reduce_m_n); /* Interface history: * diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3617927af269..3cabe52a4e3b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6101,7 +6101,7 @@ retry: pipe_config->fdi_lanes = lane; intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock, - link_bw, &pipe_config->fdi_m_n); + link_bw, &pipe_config->fdi_m_n, false); ret = ironlake_check_fdi_lanes(dev, intel_crtc->pipe, pipe_config); if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) { @@ -6277,7 +6277,8 @@ intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den) } static void compute_m_n(unsigned int m, unsigned int n, - uint32_t *ret_m, uint32_t *ret_n) + uint32_t *ret_m, uint32_t *ret_n, + bool reduce_m_n) { /* * Reduce M/N as much as possible without loss in precision. Several DP @@ -6285,9 +6286,11 @@ static void compute_m_n(unsigned int m, unsigned int n, * values. The passed in values are more likely to have the least * significant bits zero than M after rounding below, so do this first. */ - while ((m & 1) == 0 && (n & 1) == 0) { - m >>= 1; - n >>= 1; + if (reduce_m_n) { + while ((m & 1) == 0 && (n & 1) == 0) { + m >>= 1; + n >>= 1; + } } *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX); @@ -6298,16 +6301,19 @@ static void compute_m_n(unsigned int m, unsigned int n, void intel_link_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, - struct intel_link_m_n *m_n) + struct intel_link_m_n *m_n, + bool reduce_m_n) { m_n->tu = 64; compute_m_n(bits_per_pixel * pixel_clock, link_clock * nlanes * 8, - &m_n->gmch_m, &m_n->gmch_n); + &m_n->gmch_m, &m_n->gmch_n, + reduce_m_n); compute_m_n(pixel_clock, link_clock, - &m_n->link_m, &m_n->link_n); + &m_n->link_m, &m_n->link_n, + reduce_m_n); } static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 5ce45d98da78..fc691b8b317c 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1593,6 +1593,8 @@ intel_dp_compute_config(struct intel_encoder *encoder, int common_rates[DP_MAX_SUPPORTED_RATES] = {}; int common_len; uint8_t link_bw, rate_select; + bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc, + DP_DPCD_QUIRK_LIMITED_M_N); common_len = intel_dp_common_rates(intel_dp, common_rates); @@ -1722,7 +1724,8 @@ found: intel_link_compute_m_n(bpp, lane_count, adjusted_mode->crtc_clock, pipe_config->port_clock, - &pipe_config->dp_m_n); + &pipe_config->dp_m_n, + reduce_m_n); if (intel_connector->panel.downclock_mode != NULL && dev_priv->drrs.type == SEAMLESS_DRRS_SUPPORT) { @@ -1730,7 +1733,8 @@ found: intel_link_compute_m_n(bpp, lane_count, intel_connector->panel.downclock_mode->clock, pipe_config->port_clock, - &pipe_config->dp_m2_n2); + &pipe_config->dp_m2_n2, + reduce_m_n); } /* diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c index c1f62eb07c07..989e25577ac0 100644 --- a/drivers/gpu/drm/i915/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/intel_dp_mst.c @@ -44,6 +44,8 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder, int lane_count, slots; const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; int mst_pbn; + bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc, + DP_DPCD_QUIRK_LIMITED_M_N); pipe_config->has_pch_encoder = false; bpp = 24; @@ -75,7 +77,8 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder, intel_link_compute_m_n(bpp, lane_count, adjusted_mode->crtc_clock, pipe_config->port_clock, - &pipe_config->dp_m_n); + &pipe_config->dp_m_n, + reduce_m_n); pipe_config->dp_m_n.tu = slots; From f3d3eab667de62572376abb1aa26316191c39929 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 9 May 2017 10:04:36 +0200 Subject: [PATCH 0234/1065] HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices For ACPI devices which do not have a _PSC method, the ACPI subsys cannot query their initial state at boot, so these devices are assumed to have been put in D0 by the BIOS, but for touchscreens that is not always true. This commit adds a call to acpi_device_fix_up_power to explicitly put devices without a _PSC method into D0 state (for devices with a _PSC method it is a nop). Note we only need to do this on probe, after a resume the ACPI subsys knows the device is in D3 and will properly put it in D0. This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 device failing to probe with a "hid_descr_cmd failed" error. Acked-by: Benjamin Tissoires Signed-off-by: Hans de Goede Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index 8daa8ce64ebb..fb55fb4c39fc 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -897,6 +897,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, return 0; } +static void i2c_hid_acpi_fix_up_power(struct device *dev) +{ + acpi_handle handle = ACPI_HANDLE(dev); + struct acpi_device *adev; + + if (handle && acpi_bus_get_device(handle, &adev) == 0) + acpi_device_fix_up_power(adev); +} + static const struct acpi_device_id i2c_hid_acpi_match[] = { {"ACPI0C50", 0 }, {"PNP0C50", 0 }, @@ -909,6 +918,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client, { return -ENODEV; } + +static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {} #endif #ifdef CONFIG_OF @@ -1030,6 +1041,8 @@ static int i2c_hid_probe(struct i2c_client *client, if (ret < 0) goto err_regulator; + i2c_hid_acpi_fix_up_power(&client->dev); + pm_runtime_get_noresume(&client->dev); pm_runtime_set_active(&client->dev); pm_runtime_enable(&client->dev); From a082c6f680da298cf075886ff032f32ccb7c5e1a Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 29 May 2017 15:15:27 +0200 Subject: [PATCH 0235/1065] ovl: filter trusted xattr for non-admin Filesystems filter out extended attributes in the "trusted." domain for unprivlieged callers. Overlay calls underlying filesystem's method with elevated privs, so need to do the filtering in overlayfs too. Signed-off-by: Miklos Szeredi --- fs/overlayfs/inode.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c index ad9547f82da5..d613e2c41242 100644 --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -240,6 +240,16 @@ int ovl_xattr_get(struct dentry *dentry, const char *name, return res; } +static bool ovl_can_list(const char *s) +{ + /* List all non-trusted xatts */ + if (strncmp(s, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) != 0) + return true; + + /* Never list trusted.overlay, list other trusted for superuser only */ + return !ovl_is_private_xattr(s) && capable(CAP_SYS_ADMIN); +} + ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size) { struct dentry *realdentry = ovl_dentry_real(dentry); @@ -263,7 +273,7 @@ ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size) return -EIO; len -= slen; - if (ovl_is_private_xattr(s)) { + if (!ovl_can_list(s)) { res -= slen; memmove(s, s + slen, len); } else { From b0f5a8f32e8bbdaae1abb8abe2d3cbafaba57e08 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Mon, 29 May 2017 09:22:07 +0200 Subject: [PATCH 0236/1065] kthread: fix boot hang (regression) on MIPS/OpenRISC This fixes a regression in commit 4d6501dce079 where I didn't notice that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to NULL after our initialisation in copy_process(). We can simply get rid of the arch-specific initialisation here since it is now always done in copy_process() before hitting copy_thread{,_tls}(). Review notes: - As far as I can tell, copy_process() is the only user of copy_thread_tls(), which is the only caller of copy_thread() for architectures that don't implement copy_thread_tls(). - After this patch, there is no arch-specific code touching p->set_child_tid or p->clear_child_tid whatsoever. - It may look like MIPS/OpenRISC wanted to always have these fields be NULL, but that's not true, as copy_process() would unconditionally set them again _after_ calling copy_thread_tls() before commit 4d6501dce079. Fixes: 4d6501dce079c1eb6bf0b1d8f528a5e81770109e ("kthread: Fix use-after-free if kthread fork fails") Reported-by: Guenter Roeck Tested-by: Guenter Roeck # MIPS only Acked-by: Stafford Horne Acked-by: Oleg Nesterov Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: openrisc@lists.librecores.org Cc: Jamie Iles Cc: Thomas Gleixner Signed-off-by: Vegard Nossum Signed-off-by: Linus Torvalds --- arch/mips/kernel/process.c | 1 - arch/openrisc/kernel/process.c | 2 -- 2 files changed, 3 deletions(-) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 918d4c73e951..5351e1f3950d 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -120,7 +120,6 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long usp, struct thread_info *ti = task_thread_info(p); struct pt_regs *childregs, *regs = current_pt_regs(); unsigned long childksp; - p->set_child_tid = p->clear_child_tid = NULL; childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32; diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c index f8da545854f9..106859ae27ff 100644 --- a/arch/openrisc/kernel/process.c +++ b/arch/openrisc/kernel/process.c @@ -167,8 +167,6 @@ copy_thread(unsigned long clone_flags, unsigned long usp, top_of_kernel_stack = sp; - p->set_child_tid = p->clear_child_tid = NULL; - /* Locate userspace context on stack... */ sp -= STACK_FRAME_OVERHEAD; /* redzone */ sp -= sizeof(struct pt_regs); From 67a7d5f561f469ad2fa5154d2888258ab8e6df7c Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 29 May 2017 13:24:55 -0400 Subject: [PATCH 0237/1065] ext4: fix fdatasync(2) after extent manipulation operations Currently, extent manipulation operations such as hole punch, range zeroing, or extent shifting do not record the fact that file data has changed and thus fdatasync(2) has a work to do. As a result if we crash e.g. after a punch hole and fdatasync, user can still possibly see the punched out data after journal replay. Test generic/392 fails due to these problems. Fix the problem by properly marking that file data has changed in these operations. CC: stable@vger.kernel.org Fixes: a4bb6b64e39abc0e41ca077725f2a72c868e7622 Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/extents.c | 5 +++++ fs/ext4/inode.c | 2 ++ 2 files changed, 7 insertions(+) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 83a513efc824..3e36508610b7 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -4877,6 +4877,8 @@ static long ext4_zero_range(struct file *file, loff_t offset, /* Zero out partial block at the edges of the range */ ret = ext4_zero_partial_blocks(handle, inode, offset, len); + if (ret >= 0) + ext4_update_inode_fsync_trans(handle, inode, 1); if (file->f_flags & O_SYNC) ext4_handle_sync(handle); @@ -5563,6 +5565,7 @@ int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len) ext4_handle_sync(handle); inode->i_mtime = inode->i_ctime = current_time(inode); ext4_mark_inode_dirty(handle, inode); + ext4_update_inode_fsync_trans(handle, inode, 1); out_stop: ext4_journal_stop(handle); @@ -5736,6 +5739,8 @@ int ext4_insert_range(struct inode *inode, loff_t offset, loff_t len) up_write(&EXT4_I(inode)->i_data_sem); if (IS_SYNC(inode)) ext4_handle_sync(handle); + if (ret >= 0) + ext4_update_inode_fsync_trans(handle, inode, 1); out_stop: ext4_journal_stop(handle); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 657a98fa80b6..5cf82d03968c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4218,6 +4218,8 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length) inode->i_mtime = inode->i_ctime = current_time(inode); ext4_mark_inode_dirty(handle, inode); + if (ret >= 0) + ext4_update_inode_fsync_trans(handle, inode, 1); out_stop: ext4_journal_stop(handle); out_dio: From 878d8db039daac0938238e9a40a5bd6e50ee3c9b Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 10 May 2017 18:12:40 +0200 Subject: [PATCH 0238/1065] Revert "ACPI / button: Change default behavior to lid_init_state=open" Revert commit 77e9a4aa9de1 (ACPI / button: Change default behavior to lid_init_state=open) which changed the kernel's behavior on laptops that boot with closed lids and expect the lid switch state to be reported accurately by the kernel. If you boot or resume your laptop with the lid closed on a docking station while using an external monitor connected to it, both internal and external displays will light on, while only the external should. There is a design choice in gdm to only provide the greeter on the internal display when lit on, so users only see a gray area on the external monitor. Also, the cursor will not show up as it's by default on the internal display too. To "fix" that, users have to open the laptop once and close it once again to sync the state of the switch with the hardware state. Even if the "method" operation mode implementation can be buggy on some platforms, the "open" choice is worse. It breaks docking stations basically and there is no way to have a user-space hwdb to fix that. On the contrary, it's rather easy in user-space to have a hwdb with the problematic platforms. Then, libinput (1.7.0+) can fix the state of the lid switch for us: you need to set the udev property LIBINPUT_ATTR_LID_SWITCH_RELIABILITY to 'write_open'. When libinput detects internal keyboard events, it will overwrite the state of the switch to open, making it reliable again. Given that logind only checks the lid switch value after a timeout, we can assume the user will use the internal keyboard before this timeout expires. For example, such a hwdb entry is: libinput:name:*Lid Switch*:dmi:*svnMicrosoftCorporation:pnSurface3:* LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=write_open Link: https://bugzilla.gnome.org/show_bug.cgi?id=782380 Cc: 4.11+ # 4.11+ Signed-off-by: Benjamin Tissoires Signed-off-by: Rafael J. Wysocki --- drivers/acpi/button.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 6d5a8c1d3132..e19f530f1083 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -113,7 +113,7 @@ struct acpi_button { static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier); static struct acpi_device *lid_device; -static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN; +static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD; static unsigned long lid_report_interval __read_mostly = 500; module_param(lid_report_interval, ulong, 0644); From 2ea65321b83539afc1d45c1bea39c55ab42af62b Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Tue, 9 May 2017 13:57:31 +0800 Subject: [PATCH 0239/1065] ACPICA: Tables: Fix regression introduced by a too early mechanism enabling In the Linux kernel, acpi_get_table() "clones" haven't been fully balanced by acpi_put_table() invocations. In upstream ACPICA, due to the design change, there are also unbalanced acpi_get_table_by_index() invocations requiring special care. acpi_get_table() reference counting mismatches may occor due to that and printing error messages related to them is not useful at this point. The strict balanced validation count check should only be enabled after confirming that all invocations are safe and aligned with their designed purposes. Thus this patch removes the error value returned by acpi_tb_get_table() in that case along with the accompanying error message to fix the issue. Fixes: 174cc7187e6f (ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel) Cc: 4.10+ # 4.10+ Reported-by: Anush Seetharaman Reported-by: Dan Williams Signed-off-by: Lv Zheng [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/tbutils.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 5a968a78652b..7abe66505739 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -418,11 +418,7 @@ acpi_tb_get_table(struct acpi_table_desc *table_desc, table_desc->validation_count++; if (table_desc->validation_count == 0) { - ACPI_ERROR((AE_INFO, - "Table %p, Validation count is zero after increment\n", - table_desc)); table_desc->validation_count--; - return_ACPI_STATUS(AE_LIMIT); } *out_table = table_desc->pointer; From 6c77003677d5f1ce15f26d24360cb66c0bc07bb3 Mon Sep 17 00:00:00 2001 From: David Arcari Date: Fri, 26 May 2017 11:37:31 -0400 Subject: [PATCH 0240/1065] cpufreq: cpufreq_register_driver() should return -ENODEV if init fails For a driver that does not set the CPUFREQ_STICKY flag, if all of the ->init() calls fail, cpufreq_register_driver() should return an error. This will prevent the driver from loading. Fixes: ce1bcfe94db8 (cpufreq: check cpufreq_policy_list instead of scanning policies for all CPUs) Cc: 4.0+ # 4.0+ Signed-off-by: David Arcari Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 0e3f6496524d..26b643d57847 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2468,6 +2468,7 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data) if (!(cpufreq_driver->flags & CPUFREQ_STICKY) && list_empty(&cpufreq_policy_list)) { /* if all ->init() calls failed, unregister */ + ret = -ENODEV; pr_debug("%s: No CPU initialized for driver %s\n", __func__, driver_data->name); goto err_if_unreg; From 7575f8257279f9dd24b3fc950aa2c7e98564a103 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Wed, 17 May 2017 12:20:35 +0530 Subject: [PATCH 0241/1065] cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable() clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/kirkwood-cpufreq.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index 1b9bcd76c60e..c2dd43f3f5d8 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -127,7 +127,12 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev) return PTR_ERR(priv.cpu_clk); } - clk_prepare_enable(priv.cpu_clk); + err = clk_prepare_enable(priv.cpu_clk); + if (err) { + dev_err(priv.dev, "Unable to prepare cpuclk\n"); + return err; + } + kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000; priv.ddr_clk = of_clk_get_by_name(np, "ddrclk"); @@ -137,7 +142,11 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev) goto out_cpu; } - clk_prepare_enable(priv.ddr_clk); + err = clk_prepare_enable(priv.ddr_clk); + if (err) { + dev_err(priv.dev, "Unable to prepare ddrclk\n"); + goto out_cpu; + } kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000; priv.powersave_clk = of_clk_get_by_name(np, "powersave"); @@ -146,7 +155,11 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev) err = PTR_ERR(priv.powersave_clk); goto out_ddr; } - clk_prepare_enable(priv.powersave_clk); + err = clk_prepare_enable(priv.powersave_clk); + if (err) { + dev_err(priv.dev, "Unable to prepare powersave clk\n"); + goto out_ddr; + } of_node_put(np); np = NULL; From 1943d1723e7a7ee1a7b9b0ba4878dde0dc100671 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 26 May 2017 16:09:48 -0700 Subject: [PATCH 0242/1065] Input: silead - disable interrupt during suspend When we put the touchscreen controller in low-power mode the irq pin may trigger (float) and if we then try to read a data packet we get the following error in dmesg: [ 478.801017] silead_ts i2c-MSSL1680:00: Data read error -121 This commit disables the irq during suspend/resume fixing this error. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/silead.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 813dd68a5c82..0dbcf105f7db 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -526,6 +526,7 @@ static int __maybe_unused silead_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); + disable_irq(client->irq); silead_ts_set_power(client, SILEAD_POWER_OFF); return 0; } @@ -551,6 +552,8 @@ static int __maybe_unused silead_ts_resume(struct device *dev) return -ENODEV; } + enable_irq(client->irq); + return 0; } From 2755551188d240f0098cdc6f1a2984f8a1785689 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Mon, 29 May 2017 19:57:19 -0700 Subject: [PATCH 0243/1065] Input: synaptics - clear device info before filling in synaptics_query_hardware() was being passed a 'struct synaptics_device_info' in uninitialized stack memory, then not always initializing all fields. This caused garbage to show up in certain fields, making the touchpad unusable. Fix by zeroing the device info, so all fields default to 0. Fixes: 6c53694fb222 ("Input: synaptics - split device info into a separate structure") Signed-off-by: Eric Biggers Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 131df9d3660f..4f97970abc94 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -397,6 +397,8 @@ static int synaptics_query_hardware(struct psmouse *psmouse, { int error; + memset(info, 0, sizeof(*info)); + error = synaptics_identify(psmouse, info); if (error) return error; From f4947d79a7080b25829997eeee38d4d65137c161 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Tue, 23 May 2017 14:15:24 -0700 Subject: [PATCH 0244/1065] Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled Or the user might have the touchpad unbound from PS/2 but never picked up by rmi-smbus.ko Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 4f97970abc94..9b27a6c710b2 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1689,7 +1689,8 @@ enum { SYNAPTICS_INTERTOUCH_ON, }; -static int synaptics_intertouch = SYNAPTICS_INTERTOUCH_NOT_SET; +static int synaptics_intertouch = IS_ENABLED(CONFIG_RMI4_SMB) ? + SYNAPTICS_INTERTOUCH_NOT_SET : SYNAPTICS_INTERTOUCH_OFF; module_param_named(synaptics_intertouch, synaptics_intertouch, int, 0644); MODULE_PARM_DESC(synaptics_intertouch, "Use a secondary bus for the Synaptics device."); From f4101ff87dafd22fbcc3547fd3a3a3717d3d72d3 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Fri, 26 May 2017 16:21:36 -0700 Subject: [PATCH 0245/1065] Input: synaptics - warn the users when there is a better mode The Synaptics touchpads are now either using i2c-hid or rmi-smbus. Warn the users if they are missing the rmi-smbus modules and have no chance of reporting correct data. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 9b27a6c710b2..604aa3aa7284 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -176,6 +176,12 @@ static const char * const smbus_pnp_ids[] = { NULL }; +static const char * const forcepad_pnp_ids[] = { + "SYN300D", + "SYN3014", + NULL +}; + /* * Send a command to the synpatics touchpad by special commands */ @@ -482,13 +488,6 @@ static const struct min_max_quirk min_max_pnpid_table[] = { { } }; -/* This list has been kindly provided by Synaptics. */ -static const char * const forcepad_pnp_ids[] = { - "SYN300D", - "SYN3014", - NULL -}; - /***************************************************************************** * Synaptics communications functions ****************************************************************************/ @@ -1813,6 +1812,15 @@ int synaptics_init(struct psmouse *psmouse) } if (SYN_CAP_INTERTOUCH(info.ext_cap_0c)) { + if ((!IS_ENABLED(CONFIG_RMI4_SMB) || + !IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS)) && + /* Forcepads need F21, which is not ready */ + !psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids)) { + psmouse_warn(psmouse, + "The touchpad can support a better bus than the too old PS/2 protocol. " + "Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.\n"); + } + error = synaptics_setup_intertouch(psmouse, &info, true); if (!error) return PSMOUSE_SYNAPTICS_SMBUS; From 2fef826e45c6a1e63f55ab72546f7d795300d9a8 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Fri, 26 May 2017 16:51:19 -0700 Subject: [PATCH 0246/1065] Input: synaptics - tell users to report when they should be using rmi-smbus Users should really consider switching to rmi-smbus instead of plain PS/2. Notify them that they should report a missing pnpID in the file. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 604aa3aa7284..16c30460ef04 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1739,8 +1739,16 @@ static int synaptics_setup_intertouch(struct psmouse *psmouse, if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_NOT_SET) { if (!psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) && - !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids)) + !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids)) { + + if (!psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids)) + psmouse_info(psmouse, + "Your touchpad (%s) says it can support a different bus. " + "If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.\n", + psmouse->ps2dev.serio->firmware_id); + return -ENXIO; + } } psmouse_info(psmouse, "Trying to set up SMBus access\n"); From 56b177055adb246cdeca174331dbf92fc49bfccd Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 23 May 2017 07:08:43 +0000 Subject: [PATCH 0247/1065] rcar-dmac: fixup descriptor pointer for descriptor mode In descriptor mode, the descriptor running pointer is not maintained by the interrupt handler, thus, driver finds the running descriptor from the descriptor pointer field in the CHCRB register. But, CHCRB::DPTR indicates *next* descriptor pointer, not current. Thus, The residue calculation will be missed. This patch fixup it. Signed-off-by: Kuninori Morimoto Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-dmac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c index db41795fe42a..bd261c9e9664 100644 --- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -1287,6 +1287,9 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan, if (desc->hwdescs.use) { dptr = (rcar_dmac_chan_read(chan, RCAR_DMACHCRB) & RCAR_DMACHCRB_DPTR_MASK) >> RCAR_DMACHCRB_DPTR_SHIFT; + if (dptr == 0) + dptr = desc->nchunks; + dptr--; WARN_ON(dptr >= desc->nchunks); } else { running = desc->running; From 7a7c0a6438b8e7636d5a22e572892cc234f68297 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 27 May 2017 00:27:25 +0200 Subject: [PATCH 0248/1065] mac80211: fix TX aggregation start/stop callback race When starting or stopping an aggregation session, one of the steps is that the driver calls back to mac80211 that the start/stop can proceed. This is handled by queueing up a fake SKB and processing it from the normal iface/sdata work. Since this isn't flushed when disassociating, the following race is possible: * associate * start aggregation session * driver callback * disassociate * associate again to the same AP * callback processing runs, leading to a WARN_ON() that the TID hadn't requested aggregation If the second association isn't to the same AP, there would only be a message printed ("Could not find station: "), but the same race could happen. Fix this by not going the whole detour with a fake SKB etc. but simply looking up the aggregation session in the driver callback, marking it with a START_CB/STOP_CB bit and then scheduling the regular aggregation work that will now process these bits as well. This also simplifies the code and gets rid of the whole problem with allocation failures of said skb, which could have left the session in limbo. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/agg-tx.c | 160 ++++++++++++++++--------------------- net/mac80211/ht.c | 16 +++- net/mac80211/ieee80211_i.h | 14 +--- net/mac80211/iface.c | 11 +-- net/mac80211/sta_info.h | 2 + 5 files changed, 87 insertions(+), 116 deletions(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 60e2a62f7bef..cf2392b2ac71 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -7,7 +7,7 @@ * Copyright 2006-2007 Jiri Benc * Copyright 2007, Michael Wu * Copyright 2007-2010, Intel Corporation - * Copyright(c) 2015 Intel Deutschland GmbH + * Copyright(c) 2015-2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -741,7 +741,47 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local, ieee80211_agg_start_txq(sta, tid, true); } -void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid) +void ieee80211_start_tx_ba_cb(struct sta_info *sta, int tid, + struct tid_ampdu_tx *tid_tx) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct ieee80211_local *local = sdata->local; + + if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))) + return; + + if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) + ieee80211_agg_tx_operational(local, sta, tid); +} + +static struct tid_ampdu_tx * +ieee80211_lookup_tid_tx(struct ieee80211_sub_if_data *sdata, + const u8 *ra, u16 tid, struct sta_info **sta) +{ + struct tid_ampdu_tx *tid_tx; + + if (tid >= IEEE80211_NUM_TIDS) { + ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n", + tid, IEEE80211_NUM_TIDS); + return NULL; + } + + *sta = sta_info_get_bss(sdata, ra); + if (!*sta) { + ht_dbg(sdata, "Could not find station: %pM\n", ra); + return NULL; + } + + tid_tx = rcu_dereference((*sta)->ampdu_mlme.tid_tx[tid]); + + if (WARN_ON(!tid_tx)) + ht_dbg(sdata, "addBA was not requested!\n"); + + return tid_tx; +} + +void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, + const u8 *ra, u16 tid) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); struct ieee80211_local *local = sdata->local; @@ -750,57 +790,15 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid) trace_api_start_tx_ba_cb(sdata, ra, tid); - if (tid >= IEEE80211_NUM_TIDS) { - ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n", - tid, IEEE80211_NUM_TIDS); - return; - } + rcu_read_lock(); + tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta); + if (!tid_tx) + goto out; - mutex_lock(&local->sta_mtx); - sta = sta_info_get_bss(sdata, ra); - if (!sta) { - mutex_unlock(&local->sta_mtx); - ht_dbg(sdata, "Could not find station: %pM\n", ra); - return; - } - - mutex_lock(&sta->ampdu_mlme.mtx); - tid_tx = rcu_dereference_protected_tid_tx(sta, tid); - - if (WARN_ON(!tid_tx)) { - ht_dbg(sdata, "addBA was not requested!\n"); - goto unlock; - } - - if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))) - goto unlock; - - if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) - ieee80211_agg_tx_operational(local, sta, tid); - - unlock: - mutex_unlock(&sta->ampdu_mlme.mtx); - mutex_unlock(&local->sta_mtx); -} - -void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, - const u8 *ra, u16 tid) -{ - struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); - struct ieee80211_local *local = sdata->local; - struct ieee80211_ra_tid *ra_tid; - struct sk_buff *skb = dev_alloc_skb(0); - - if (unlikely(!skb)) - return; - - ra_tid = (struct ieee80211_ra_tid *) &skb->cb; - memcpy(&ra_tid->ra, ra, ETH_ALEN); - ra_tid->tid = tid; - - skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_START; - skb_queue_tail(&sdata->skb_queue, skb); - ieee80211_queue_work(&local->hw, &sdata->work); + set_bit(HT_AGG_STATE_START_CB, &tid_tx->state); + ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work); + out: + rcu_read_unlock(); } EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe); @@ -860,37 +858,18 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) } EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); -void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) +void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid, + struct tid_ampdu_tx *tid_tx) { - struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); - struct ieee80211_local *local = sdata->local; - struct sta_info *sta; - struct tid_ampdu_tx *tid_tx; + struct ieee80211_sub_if_data *sdata = sta->sdata; bool send_delba = false; - trace_api_stop_tx_ba_cb(sdata, ra, tid); + ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n", + sta->sta.addr, tid); - if (tid >= IEEE80211_NUM_TIDS) { - ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n", - tid, IEEE80211_NUM_TIDS); - return; - } - - ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n", ra, tid); - - mutex_lock(&local->sta_mtx); - - sta = sta_info_get_bss(sdata, ra); - if (!sta) { - ht_dbg(sdata, "Could not find station: %pM\n", ra); - goto unlock; - } - - mutex_lock(&sta->ampdu_mlme.mtx); spin_lock_bh(&sta->lock); - tid_tx = rcu_dereference_protected_tid_tx(sta, tid); - if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { + if (!test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { ht_dbg(sdata, "unexpected callback to A-MPDU stop for %pM tid %d\n", sta->sta.addr, tid); @@ -906,12 +885,8 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) spin_unlock_bh(&sta->lock); if (send_delba) - ieee80211_send_delba(sdata, ra, tid, + ieee80211_send_delba(sdata, sta->sta.addr, tid, WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE); - - mutex_unlock(&sta->ampdu_mlme.mtx); - unlock: - mutex_unlock(&local->sta_mtx); } void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, @@ -919,19 +894,20 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); struct ieee80211_local *local = sdata->local; - struct ieee80211_ra_tid *ra_tid; - struct sk_buff *skb = dev_alloc_skb(0); + struct sta_info *sta; + struct tid_ampdu_tx *tid_tx; - if (unlikely(!skb)) - return; + trace_api_stop_tx_ba_cb(sdata, ra, tid); - ra_tid = (struct ieee80211_ra_tid *) &skb->cb; - memcpy(&ra_tid->ra, ra, ETH_ALEN); - ra_tid->tid = tid; + rcu_read_lock(); + tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta); + if (!tid_tx) + goto out; - skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_STOP; - skb_queue_tail(&sdata->skb_queue, skb); - ieee80211_queue_work(&local->hw, &sdata->work); + set_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state); + ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work); + out: + rcu_read_unlock(); } EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe); diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index f4a528773563..6ca5442b1e03 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -7,6 +7,7 @@ * Copyright 2006-2007 Jiri Benc * Copyright 2007, Michael Wu * Copyright 2007-2010, Intel Corporation + * Copyright 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -289,8 +290,6 @@ void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, { int i; - cancel_work_sync(&sta->ampdu_mlme.work); - for (i = 0; i < IEEE80211_NUM_TIDS; i++) { __ieee80211_stop_tx_ba_session(sta, i, reason); __ieee80211_stop_rx_ba_session(sta, i, WLAN_BACK_RECIPIENT, @@ -298,6 +297,9 @@ void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, reason != AGG_STOP_DESTROY_STA && reason != AGG_STOP_PEER_REQUEST); } + + /* stopping might queue the work again - so cancel only afterwards */ + cancel_work_sync(&sta->ampdu_mlme.work); } void ieee80211_ba_session_work(struct work_struct *work) @@ -352,10 +354,16 @@ void ieee80211_ba_session_work(struct work_struct *work) spin_unlock_bh(&sta->lock); tid_tx = rcu_dereference_protected_tid_tx(sta, tid); - if (tid_tx && test_and_clear_bit(HT_AGG_STATE_WANT_STOP, - &tid_tx->state)) + if (!tid_tx) + continue; + + if (test_and_clear_bit(HT_AGG_STATE_START_CB, &tid_tx->state)) + ieee80211_start_tx_ba_cb(sta, tid, tid_tx); + if (test_and_clear_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state)) ___ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_LOCAL_REQUEST); + if (test_and_clear_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state)) + ieee80211_stop_tx_ba_cb(sta, tid, tid_tx); } mutex_unlock(&sta->ampdu_mlme.mtx); } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index f8f6c148f554..665501ac358f 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1036,8 +1036,6 @@ struct ieee80211_rx_agg { enum sdata_queue_type { IEEE80211_SDATA_QUEUE_TYPE_FRAME = 0, - IEEE80211_SDATA_QUEUE_AGG_START = 1, - IEEE80211_SDATA_QUEUE_AGG_STOP = 2, IEEE80211_SDATA_QUEUE_RX_AGG_START = 3, IEEE80211_SDATA_QUEUE_RX_AGG_STOP = 4, }; @@ -1427,12 +1425,6 @@ ieee80211_get_sband(struct ieee80211_sub_if_data *sdata) return local->hw.wiphy->bands[band]; } -/* this struct represents 802.11n's RA/TID combination */ -struct ieee80211_ra_tid { - u8 ra[ETH_ALEN]; - u16 tid; -}; - /* this struct holds the value parsing from channel switch IE */ struct ieee80211_csa_ie { struct cfg80211_chan_def chandef; @@ -1794,8 +1786,10 @@ int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, enum ieee80211_agg_stop_reason reason); int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, enum ieee80211_agg_stop_reason reason); -void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid); -void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid); +void ieee80211_start_tx_ba_cb(struct sta_info *sta, int tid, + struct tid_ampdu_tx *tid_tx); +void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid, + struct tid_ampdu_tx *tid_tx); void ieee80211_ba_session_work(struct work_struct *work); void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid); void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 3bd5b81f5d81..8fae1a72e6a7 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1237,7 +1237,6 @@ static void ieee80211_iface_work(struct work_struct *work) struct ieee80211_local *local = sdata->local; struct sk_buff *skb; struct sta_info *sta; - struct ieee80211_ra_tid *ra_tid; struct ieee80211_rx_agg *rx_agg; if (!ieee80211_sdata_running(sdata)) @@ -1253,15 +1252,7 @@ static void ieee80211_iface_work(struct work_struct *work) while ((skb = skb_dequeue(&sdata->skb_queue))) { struct ieee80211_mgmt *mgmt = (void *)skb->data; - if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_START) { - ra_tid = (void *)&skb->cb; - ieee80211_start_tx_ba_cb(&sdata->vif, ra_tid->ra, - ra_tid->tid); - } else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_STOP) { - ra_tid = (void *)&skb->cb; - ieee80211_stop_tx_ba_cb(&sdata->vif, ra_tid->ra, - ra_tid->tid); - } else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_RX_AGG_START) { + if (skb->pkt_type == IEEE80211_SDATA_QUEUE_RX_AGG_START) { rx_agg = (void *)&skb->cb; mutex_lock(&local->sta_mtx); sta = sta_info_get_bss(sdata, rx_agg->addr); diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 5609cacb20d5..ea0747d6a6da 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -116,6 +116,8 @@ enum ieee80211_sta_info_flags { #define HT_AGG_STATE_STOPPING 3 #define HT_AGG_STATE_WANT_START 4 #define HT_AGG_STATE_WANT_STOP 5 +#define HT_AGG_STATE_START_CB 6 +#define HT_AGG_STATE_STOP_CB 7 enum ieee80211_agg_stop_reason { AGG_STOP_DECLINED, From 4b1c88984c8ac894c2c411570757bed7fa5f3226 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 18 May 2017 15:13:57 +0200 Subject: [PATCH 0249/1065] iommu/dma: Fix function declaration Newly added code in the ipmmu-vmsa driver showed a small mistake in a header file that can't be included by itself without CONFIG_IOMMU_DMA enabled: In file included from drivers/iommu/ipmmu-vmsa.c:13:0: include/linux/dma-iommu.h:105:94: error: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] This adds a forward declaration for 'struct device', similar to how we treat the other struct types in this case. Fixes: 3ae47292024f ("iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops") Fixes: 273df9635385 ("iommu/dma: Make PCI window reservation generic") Signed-off-by: Arnd Bergmann Acked-by: Robin Murphy Signed-off-by: Joerg Roedel --- include/linux/dma-iommu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/dma-iommu.h b/include/linux/dma-iommu.h index 4eac2670bfa1..92f20832fd28 100644 --- a/include/linux/dma-iommu.h +++ b/include/linux/dma-iommu.h @@ -78,6 +78,7 @@ void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list); struct iommu_domain; struct msi_msg; +struct device; static inline int iommu_dma_init(void) { From 573d41757c47cb71cd572236685d4c9e6cacc06c Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Sat, 27 May 2017 19:17:40 +0530 Subject: [PATCH 0250/1065] iommu/of: Fix check for returning EPROBE_DEFER Now with IOMMU probe deferral, we return -EPROBE_DEFER for masters that are connected to an IOMMU which is not probed yet, but going to get probed, so that we can attach the correct dma_ops. So while trying to defer the probe of the master, check if the of_iommu node that it is connected to is marked in DT as 'status=disabled', then the IOMMU is never is going to get probed. So simply return NULL and let the master work without an IOMMU. Fixes: 7b07cbefb68d ("iommu: of: Handle IOMMU lookup failure with deferred probing or error") Reported-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Tested-by: Will Deacon Tested-by: Magnus Damn Acked-by: Will Deacon Signed-off-by: Sricharan R Signed-off-by: Joerg Roedel --- drivers/iommu/of_iommu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c index 9f44ee8ea1bc..e6e9bec42e5f 100644 --- a/drivers/iommu/of_iommu.c +++ b/drivers/iommu/of_iommu.c @@ -118,6 +118,7 @@ static const struct iommu_ops ops = iommu_ops_from_fwnode(fwnode); if ((ops && !ops->of_xlate) || + !of_device_is_available(iommu_spec->np) || (!ops && !of_iommu_driver_present(iommu_spec->np))) return NULL; From a37b19a384914c60b7e1264a6c21e7bf96b637e8 Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Sat, 27 May 2017 19:17:41 +0530 Subject: [PATCH 0251/1065] iommu/of: Ignore all errors except EPROBE_DEFER While deferring the probe of IOMMU masters, xlate and add_device callbacks called from of_iommu_configure can pass back error values like -ENODEV, which means the IOMMU cannot be connected with that master for real reasons. Before the IOMMU probe deferral, all such errors were ignored. Now all those errors are propagated back, killing the master's probe for such errors. Instead ignore all the errors except EPROBE_DEFER, which is the only one of concern and let the master work without IOMMU, thus restoring the old behavior. Also make explicit that of_dma_configure handles only -EPROBE_DEFER from of_iommu_configure. Fixes: 7b07cbefb68d ("iommu: of: Handle IOMMU lookup failure with deferred probing or error") Reported-by: Geert Uytterhoeven Tested-by: Magnus Damn Signed-off-by: Sricharan R Signed-off-by: Joerg Roedel --- drivers/iommu/of_iommu.c | 6 ++++++ drivers/of/device.c | 4 ++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c index e6e9bec42e5f..19779b88a479 100644 --- a/drivers/iommu/of_iommu.c +++ b/drivers/iommu/of_iommu.c @@ -237,6 +237,12 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, ops = ERR_PTR(err); } + /* Ignore all other errors apart from EPROBE_DEFER */ + if (IS_ERR(ops) && (PTR_ERR(ops) != -EPROBE_DEFER)) { + dev_dbg(dev, "Adding to IOMMU failed: %ld\n", PTR_ERR(ops)); + ops = NULL; + } + return ops; } diff --git a/drivers/of/device.c b/drivers/of/device.c index 9416d052cb89..28c38c756f92 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -144,8 +144,8 @@ int of_dma_configure(struct device *dev, struct device_node *np) coherent ? " " : " not "); iommu = of_iommu_configure(dev, np); - if (IS_ERR(iommu)) - return PTR_ERR(iommu); + if (IS_ERR(iommu) && PTR_ERR(iommu) == -EPROBE_DEFER) + return -EPROBE_DEFER; dev_dbg(dev, "device is%sbehind an iommu\n", iommu ? " " : " not "); From 058f8c3fb44d028ba44c2e3635d8bee9787018d6 Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Sat, 27 May 2017 19:17:42 +0530 Subject: [PATCH 0252/1065] ACPI/IORT: Ignore all errors except EPROBE_DEFER While deferring the probe of IOMMU masters, xlate and add_device callbacks called from iort_iommu_configure can pass back error values like -ENODEV, which means the IOMMU cannot be connected with that master for real reasons. Before the IOMMU probe deferral, all such errors were ignored. Now all those errors are propagated back, killing the master's probe for such errors. Instead ignore all the errors except EPROBE_DEFER, which is the only one of concern and let the master work without IOMMU, thus restoring the old behavior. Also make explicit that acpi_dma_configure handles only -EPROBE_DEFER from iort_iommu_configure. Fixes: 5a1bb638d567 ("drivers: acpi: Handle IOMMU lookup failure with deferred probing or error") Signed-off-by: Sricharan R Signed-off-by: Joerg Roedel --- drivers/acpi/arm64/iort.c | 6 ++++++ drivers/acpi/scan.c | 4 ++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index c5fecf97ee2f..16e101f1f69d 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -782,6 +782,12 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) if (err) ops = ERR_PTR(err); + /* Ignore all other errors apart from EPROBE_DEFER */ + if (IS_ERR(ops) && (PTR_ERR(ops) != -EPROBE_DEFER)) { + dev_dbg(dev, "Adding to IOMMU failed: %ld\n", PTR_ERR(ops)); + ops = NULL; + } + return ops; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index e39ec7b7cb67..3a10d7573477 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1371,8 +1371,8 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) iort_set_dma_mask(dev); iommu = iort_iommu_configure(dev); - if (IS_ERR(iommu)) - return PTR_ERR(iommu); + if (IS_ERR(iommu) && PTR_ERR(iommu) == -EPROBE_DEFER) + return -EPROBE_DEFER; size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1); /* From a93a121a96531b99d6feb8db96417b49e1bb28e8 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 27 May 2017 19:17:43 +0530 Subject: [PATCH 0253/1065] ARM: dma-mapping: Don't tear down third-party mappings arch_setup_dma_ops() is used in device probe code paths to create an IOMMU mapping and attach it to the device. The function assumes that the device is attached to a device-specific IOMMU instance (or at least a device-specific TLB in a shared IOMMU instance) and thus creates a separate mapping for every device. On several systems (Renesas R-Car Gen2 being one of them), that assumption is not true, and IOMMU mappings must be shared between multiple devices. In those cases the IOMMU driver knows better than the generic ARM dma-mapping layer and attaches mapping to devices manually with arm_iommu_attach_device(), which sets the DMA ops for the device. The arch_setup_dma_ops() function takes this into account and bails out immediately if the device already has DMA ops assigned. However, the corresponding arch_teardown_dma_ops() function, called from driver unbind code paths (including probe deferral), will tear the mapping down regardless of who created it. When the device is reprobed arch_setup_dma_ops() will be called again but won't perform any operation as the DMA ops will still be set. We need to reset the DMA ops in arch_teardown_dma_ops() to fix this. However, we can't do so unconditionally, as then a new mapping would be created by arch_setup_dma_ops() when the device is reprobed, regardless of whether the device needs to share a mapping or not. We must thus keep track of whether arch_setup_dma_ops() created the mapping, and only in that case tear it down in arch_teardown_dma_ops(). Keep track of that information in the dev_archdata structure. As the structure is embedded in all instances of struct device let's not grow it, but turn the existing dma_coherent bool field into a bitfield that can be used for other purposes. Fixes: 09515ef5ddad ("of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices") Reviewed-by: Robin Murphy Signed-off-by: Laurent Pinchart Signed-off-by: Joerg Roedel --- arch/arm/include/asm/device.h | 3 ++- arch/arm/mm/dma-mapping.c | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index 36ec9c8f6e16..3234fe9bba6e 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -19,7 +19,8 @@ struct dev_archdata { #ifdef CONFIG_XEN const struct dma_map_ops *dev_dma_ops; #endif - bool dma_coherent; + unsigned int dma_coherent:1; + unsigned int dma_ops_setup:1; }; struct omap_device; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c742dfd2967b..b48998f90bfb 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -2430,9 +2430,13 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, dev->dma_ops = xen_dma_ops; } #endif + dev->archdata.dma_ops_setup = true; } void arch_teardown_dma_ops(struct device *dev) { + if (!dev->archdata.dma_ops_setup) + return; + arm_teardown_iommu_dma_ops(dev); } From 4dac3210c54a04be9c187dd31b4debb46e3d792b Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Sat, 27 May 2017 19:17:44 +0530 Subject: [PATCH 0254/1065] ACPI/IORT: Move the check to get iommu_ops from translated fwspec With IOMMU probe deferral, iort_iommu_configure can be called multiple times for the same device. Hence we have a check to see if the device's fwspec is already translated and return the iommu_ops from that directly. But the check is wrongly placed in iort_iommu_xlate, which breaks devices with multiple sids. Move the check to iort_iommu_configure. Fixes: 5a1bb638d567 ("drivers: acpi: Handle IOMMU lookup failure with deferred probing or error") Tested-by: Nate Watterson Signed-off-by: Lorenzo Pieralisi Signed-off-by: Joerg Roedel --- drivers/acpi/arm64/iort.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index 16e101f1f69d..797b28dc7b34 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -666,14 +666,6 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev, int ret = -ENODEV; struct fwnode_handle *iort_fwnode; - /* - * If we already translated the fwspec there - * is nothing left to do, return the iommu_ops. - */ - ops = iort_fwspec_iommu_ops(dev->iommu_fwspec); - if (ops) - return ops; - if (node) { iort_fwnode = iort_get_fwnode(node); if (!iort_fwnode) @@ -735,6 +727,14 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) u32 streamid = 0; int err; + /* + * If we already translated the fwspec there + * is nothing left to do, return the iommu_ops. + */ + ops = iort_fwspec_iommu_ops(dev->iommu_fwspec); + if (ops) + return ops; + if (dev_is_pci(dev)) { struct pci_bus *bus = to_pci_dev(dev)->bus; u32 rid; From d3e01c51598b2639a4830549058500e5f2ace86f Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Sat, 27 May 2017 19:17:45 +0530 Subject: [PATCH 0255/1065] arm: dma-mapping: Reset the device's dma_ops arch_teardown_dma_ops() being the inverse of arch_setup_dma_ops() ,dma_ops should be cleared in the teardown path. Currently, only the device's iommu mapping structures are cleared in arch_teardown_dma_ops, but not the dma_ops. So on the next reprobe, dma_ops left in place is stale from the first IOMMU setup, but iommu mappings has been disposed of. This is a problem when the probe of the device is deferred and recalled with the IOMMU probe deferral. So for fixing this, slightly refactor by moving the code from __arm_iommu_detach_device to arm_iommu_detach_device and cleanup the former. This takes care of resetting the dma_ops in the teardown path. Fixes: 09515ef5ddad ("of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices") Reviewed-by: Laurent Pinchart Signed-off-by: Sricharan R Signed-off-by: Joerg Roedel --- arch/arm/mm/dma-mapping.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index b48998f90bfb..bd83c531828a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -2311,7 +2311,14 @@ int arm_iommu_attach_device(struct device *dev, } EXPORT_SYMBOL_GPL(arm_iommu_attach_device); -static void __arm_iommu_detach_device(struct device *dev) +/** + * arm_iommu_detach_device + * @dev: valid struct device pointer + * + * Detaches the provided device from a previously attached map. + * This voids the dma operations (dma_map_ops pointer) + */ +void arm_iommu_detach_device(struct device *dev) { struct dma_iommu_mapping *mapping; @@ -2324,22 +2331,10 @@ static void __arm_iommu_detach_device(struct device *dev) iommu_detach_device(mapping->domain, dev); kref_put(&mapping->kref, release_iommu_mapping); to_dma_iommu_mapping(dev) = NULL; + set_dma_ops(dev, NULL); pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev)); } - -/** - * arm_iommu_detach_device - * @dev: valid struct device pointer - * - * Detaches the provided device from a previously attached map. - * This voids the dma operations (dma_map_ops pointer) - */ -void arm_iommu_detach_device(struct device *dev) -{ - __arm_iommu_detach_device(dev); - set_dma_ops(dev, NULL); -} EXPORT_SYMBOL_GPL(arm_iommu_detach_device); static const struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent) @@ -2379,7 +2374,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev) if (!mapping) return; - __arm_iommu_detach_device(dev); + arm_iommu_detach_device(dev); arm_iommu_release_mapping(mapping); } From f434b1c4aba5cc4e5bae4399a965b5fd14011d69 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Thu, 25 May 2017 15:08:07 +0530 Subject: [PATCH 0256/1065] MAINTAINERS: add device-tree files to TI DaVinci entry Add device-tree files relevant to TI DaVinci platform to its entry so mach-davinci sub-arch maintainers get copied on patches with device-tree file updates. Signed-off-by: Sekhar Nori --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index f7d568b8f133..a3e559bdb452 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11775,6 +11775,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git S: Supported F: arch/arm/mach-davinci/ F: drivers/i2c/busses/i2c-davinci.c +F: arch/arm/boot/dts/da850* TI DAVINCI SERIES MEDIA DRIVER M: "Lad, Prabhakar" From 477c50e8dc1c7b5004e099b8b74ca8b70be2f4fd Mon Sep 17 00:00:00 2001 From: Wei Huang Date: Tue, 30 May 2017 11:56:22 +0100 Subject: [PATCH 0257/1065] drivers/perf: arm_pmu_acpi: avoid perf IRQ init when guest PMU is off We saw perf IRQ init failures when running Linux kernel in an ACPI guest without PMU (i.e. pmu=off). This is because perf IRQ is not present when pmu=off, but arm_pmu_acpi still tries to register or unregister GSI. This patch addresses the problem by checking gicc->performance_interrupt. If it is 0, which is the value set by qemu when pmu=off, we skip the IRQ register/unregister process. [ 4.069470] bc00: 0000000000040b00 ffff0000089db190 [ 4.070267] [] enable_percpu_irq+0xdc/0xe4 [ 4.071192] [] arm_perf_starting_cpu+0x108/0x10c [ 4.072200] [] cpuhp_invoke_callback+0x14c/0x4ac [ 4.073210] [] cpuhp_thread_fun+0xd4/0x11c [ 4.074132] [] smpboot_thread_fn+0x1b4/0x1c4 [ 4.075081] [] kthread+0x10c/0x138 [ 4.075921] [] ret_from_fork+0x10/0x50 [ 4.076947] genirq: Setting trigger mode 4 for irq 43 failed (gic_set_type+0x0/0x74) Signed-off-by: Wei Huang [will: add comment justifying deviation from ACPI spec, removed redundant hunk] Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- drivers/perf/arm_pmu_acpi.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c index 34c862f213c7..0a9b78705ee8 100644 --- a/drivers/perf/arm_pmu_acpi.c +++ b/drivers/perf/arm_pmu_acpi.c @@ -29,6 +29,17 @@ static int arm_pmu_acpi_register_irq(int cpu) return -EINVAL; gsi = gicc->performance_interrupt; + + /* + * Per the ACPI spec, the MADT cannot describe a PMU that doesn't + * have an interrupt. QEMU advertises this by using a GSI of zero, + * which is not known to be valid on any hardware despite being + * valid per the spec. Take the pragmatic approach and reject a + * GSI of zero for now. + */ + if (!gsi) + return 0; + if (gicc->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE) trigger = ACPI_EDGE_SENSITIVE; else From af622b86665881ffa96bc77fb89c94fae02cfa6b Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 23 May 2017 17:49:54 +0200 Subject: [PATCH 0258/1065] nbd: nbd_reset() call in nbd_dev_add() is redundant There is nothing to clear -- nbd_device has just been allocated. Fold nbd_reset() into its other caller, nbd_config_put(). Signed-off-by: Ilya Dryomov Reviewed-by: Josef Bacik Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 9a7bb2c29447..e725d8d5ab0b 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -937,14 +937,6 @@ static int nbd_reconnect_socket(struct nbd_device *nbd, unsigned long arg) return -ENOSPC; } -/* Reset all properties of an NBD device */ -static void nbd_reset(struct nbd_device *nbd) -{ - nbd->config = NULL; - nbd->tag_set.timeout = 0; - queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, nbd->disk->queue); -} - static void nbd_bdev_reset(struct block_device *bdev) { if (bdev->bd_openers > 1) @@ -1029,7 +1021,10 @@ static void nbd_config_put(struct nbd_device *nbd) } kfree(config->socks); } - nbd_reset(nbd); + nbd->config = NULL; + + nbd->tag_set.timeout = 0; + queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, nbd->disk->queue); mutex_unlock(&nbd->config_lock); nbd_put(nbd); @@ -1483,7 +1478,6 @@ static int nbd_dev_add(int index) disk->fops = &nbd_fops; disk->private_data = nbd; sprintf(disk->disk_name, "nbd%d", index); - nbd_reset(nbd); add_disk(disk); nbd_total_devices++; return index; From fa9765323a93473d3853d04c9903958453c92ad4 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 23 May 2017 17:49:55 +0200 Subject: [PATCH 0259/1065] nbd: don't leak nbd_config nbd_config is allocated in nbd_alloc_config(), but never freed. Fixes: 5ea8d10802ec ("nbd: separate out the config information") Signed-off-by: Ilya Dryomov Reviewed-by: Josef Bacik Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index e725d8d5ab0b..f3f191ba8ca4 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1021,6 +1021,7 @@ static void nbd_config_put(struct nbd_device *nbd) } kfree(config->socks); } + kfree(nbd->config); nbd->config = NULL; nbd->tag_set.timeout = 0; From cbf712792b6e61317b93dd56dd5c0784363c9ac9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Radim=20Kr=C4=8Dm=C3=A1=C5=99?= Date: Fri, 19 May 2017 15:48:51 +0200 Subject: [PATCH 0260/1065] KVM: nVMX: fix nested_vmx_check_vmptr failure paths under debugging MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kvm_skip_emulated_instruction() will return 0 if userspace is single-stepping the guest. kvm_skip_emulated_instruction() uses return status convention of exit handler: 0 means "exit to userspace" and 1 means "continue vm entries". The problem is that nested_vmx_check_vmptr() return status means something else: 0 is ok, 1 is error. This means we would continue executing after a failure. Static checker noticed it because vmptr was not initialized. Reported-by: Dan Carpenter Fixes: 6affcbedcac7 ("KVM: x86: Add kvm_skip_emulated_instruction and use it.") Signed-off-by: Radim Krčmář Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 140 ++++++++++++++++++--------------------------- 1 file changed, 57 insertions(+), 83 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 880f371705bc..9b4b5d6dcd34 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -6914,97 +6914,21 @@ static int get_vmx_mem_address(struct kvm_vcpu *vcpu, return 0; } -/* - * This function performs the various checks including - * - if it's 4KB aligned - * - No bits beyond the physical address width are set - * - Returns 0 on success or else 1 - * (Intel SDM Section 30.3) - */ -static int nested_vmx_check_vmptr(struct kvm_vcpu *vcpu, int exit_reason, - gpa_t *vmpointer) +static int nested_vmx_get_vmptr(struct kvm_vcpu *vcpu, gpa_t *vmpointer) { gva_t gva; - gpa_t vmptr; struct x86_exception e; - struct page *page; - struct vcpu_vmx *vmx = to_vmx(vcpu); - int maxphyaddr = cpuid_maxphyaddr(vcpu); if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION), vmcs_read32(VMX_INSTRUCTION_INFO), false, &gva)) return 1; - if (kvm_read_guest_virt(&vcpu->arch.emulate_ctxt, gva, &vmptr, - sizeof(vmptr), &e)) { + if (kvm_read_guest_virt(&vcpu->arch.emulate_ctxt, gva, vmpointer, + sizeof(*vmpointer), &e)) { kvm_inject_page_fault(vcpu, &e); return 1; } - switch (exit_reason) { - case EXIT_REASON_VMON: - /* - * SDM 3: 24.11.5 - * The first 4 bytes of VMXON region contain the supported - * VMCS revision identifier - * - * Note - IA32_VMX_BASIC[48] will never be 1 - * for the nested case; - * which replaces physical address width with 32 - * - */ - if (!PAGE_ALIGNED(vmptr) || (vmptr >> maxphyaddr)) { - nested_vmx_failInvalid(vcpu); - return kvm_skip_emulated_instruction(vcpu); - } - - page = nested_get_page(vcpu, vmptr); - if (page == NULL) { - nested_vmx_failInvalid(vcpu); - return kvm_skip_emulated_instruction(vcpu); - } - if (*(u32 *)kmap(page) != VMCS12_REVISION) { - kunmap(page); - nested_release_page_clean(page); - nested_vmx_failInvalid(vcpu); - return kvm_skip_emulated_instruction(vcpu); - } - kunmap(page); - nested_release_page_clean(page); - vmx->nested.vmxon_ptr = vmptr; - break; - case EXIT_REASON_VMCLEAR: - if (!PAGE_ALIGNED(vmptr) || (vmptr >> maxphyaddr)) { - nested_vmx_failValid(vcpu, - VMXERR_VMCLEAR_INVALID_ADDRESS); - return kvm_skip_emulated_instruction(vcpu); - } - - if (vmptr == vmx->nested.vmxon_ptr) { - nested_vmx_failValid(vcpu, - VMXERR_VMCLEAR_VMXON_POINTER); - return kvm_skip_emulated_instruction(vcpu); - } - break; - case EXIT_REASON_VMPTRLD: - if (!PAGE_ALIGNED(vmptr) || (vmptr >> maxphyaddr)) { - nested_vmx_failValid(vcpu, - VMXERR_VMPTRLD_INVALID_ADDRESS); - return kvm_skip_emulated_instruction(vcpu); - } - - if (vmptr == vmx->nested.vmxon_ptr) { - nested_vmx_failValid(vcpu, - VMXERR_VMPTRLD_VMXON_POINTER); - return kvm_skip_emulated_instruction(vcpu); - } - break; - default: - return 1; /* shouldn't happen */ - } - - if (vmpointer) - *vmpointer = vmptr; return 0; } @@ -7066,6 +6990,8 @@ out_msr_bitmap: static int handle_vmon(struct kvm_vcpu *vcpu) { int ret; + gpa_t vmptr; + struct page *page; struct vcpu_vmx *vmx = to_vmx(vcpu); const u64 VMXON_NEEDED_FEATURES = FEATURE_CONTROL_LOCKED | FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX; @@ -7095,9 +7021,37 @@ static int handle_vmon(struct kvm_vcpu *vcpu) return 1; } - if (nested_vmx_check_vmptr(vcpu, EXIT_REASON_VMON, NULL)) + if (nested_vmx_get_vmptr(vcpu, &vmptr)) return 1; - + + /* + * SDM 3: 24.11.5 + * The first 4 bytes of VMXON region contain the supported + * VMCS revision identifier + * + * Note - IA32_VMX_BASIC[48] will never be 1 for the nested case; + * which replaces physical address width with 32 + */ + if (!PAGE_ALIGNED(vmptr) || (vmptr >> cpuid_maxphyaddr(vcpu))) { + nested_vmx_failInvalid(vcpu); + return kvm_skip_emulated_instruction(vcpu); + } + + page = nested_get_page(vcpu, vmptr); + if (page == NULL) { + nested_vmx_failInvalid(vcpu); + return kvm_skip_emulated_instruction(vcpu); + } + if (*(u32 *)kmap(page) != VMCS12_REVISION) { + kunmap(page); + nested_release_page_clean(page); + nested_vmx_failInvalid(vcpu); + return kvm_skip_emulated_instruction(vcpu); + } + kunmap(page); + nested_release_page_clean(page); + + vmx->nested.vmxon_ptr = vmptr; ret = enter_vmx_operation(vcpu); if (ret) return ret; @@ -7213,9 +7167,19 @@ static int handle_vmclear(struct kvm_vcpu *vcpu) if (!nested_vmx_check_permission(vcpu)) return 1; - if (nested_vmx_check_vmptr(vcpu, EXIT_REASON_VMCLEAR, &vmptr)) + if (nested_vmx_get_vmptr(vcpu, &vmptr)) return 1; + if (!PAGE_ALIGNED(vmptr) || (vmptr >> cpuid_maxphyaddr(vcpu))) { + nested_vmx_failValid(vcpu, VMXERR_VMCLEAR_INVALID_ADDRESS); + return kvm_skip_emulated_instruction(vcpu); + } + + if (vmptr == vmx->nested.vmxon_ptr) { + nested_vmx_failValid(vcpu, VMXERR_VMCLEAR_VMXON_POINTER); + return kvm_skip_emulated_instruction(vcpu); + } + if (vmptr == vmx->nested.current_vmptr) nested_release_vmcs12(vmx); @@ -7545,9 +7509,19 @@ static int handle_vmptrld(struct kvm_vcpu *vcpu) if (!nested_vmx_check_permission(vcpu)) return 1; - if (nested_vmx_check_vmptr(vcpu, EXIT_REASON_VMPTRLD, &vmptr)) + if (nested_vmx_get_vmptr(vcpu, &vmptr)) return 1; + if (!PAGE_ALIGNED(vmptr) || (vmptr >> cpuid_maxphyaddr(vcpu))) { + nested_vmx_failValid(vcpu, VMXERR_VMPTRLD_INVALID_ADDRESS); + return kvm_skip_emulated_instruction(vcpu); + } + + if (vmptr == vmx->nested.vmxon_ptr) { + nested_vmx_failValid(vcpu, VMXERR_VMPTRLD_VMXON_POINTER); + return kvm_skip_emulated_instruction(vcpu); + } + if (vmx->nested.current_vmptr != vmptr) { struct vmcs12 *new_vmcs12; struct page *page; From 8eae9570d1d3887487be0b355d12656b46fac226 Mon Sep 17 00:00:00 2001 From: Gioh Kim Date: Tue, 30 May 2017 15:24:45 +0200 Subject: [PATCH 0261/1065] KVM: SVM: ignore type when setting segment registers Commit 19bca6ab75d8 ("KVM: SVM: Fix cross vendor migration issue with unusable bit") added checking type when setting unusable. So unusable can be set if present is 0 OR type is 0. According to the AMD processor manual, long mode ignores the type value in segment descriptor. And type can be 0 if it is read-only data segment. Therefore type value is not related to unusable flag. This patch is based on linux-next v4.12.0-rc3. Signed-off-by: Gioh Kim Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 183ddb235fb4..a654372efea1 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1807,7 +1807,7 @@ static void svm_get_segment(struct kvm_vcpu *vcpu, * AMD's VMCB does not have an explicit unusable field, so emulate it * for cross vendor migration purposes by "not present" */ - var->unusable = !var->present || (var->type == 0); + var->unusable = !var->present; switch (seg) { case VCPU_SREG_TR: From 025d0973a0ec2121c6fd0da59e8cc3829fbb221e Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Sun, 28 May 2017 23:07:01 -0300 Subject: [PATCH 0262/1065] cxgb4: avoid crash on PCI error recovery path During PCI error recovery process, specifically on eeh_err_detected() we might have a NULL netdev struct, hence a direct dereference will lead to a kernel oops. This was observed with latest upstream kernel (v4.12-rc2) on Chelsio adapter T422-CR in PowerPC machines. This patch checks for NULL pointer and avoids the crash, both in eeh_err_detected() and eeh_resume(). Also, we avoid to trigger a fatal error or to try disabling interrupts on FW during PCI error recovery, because: (a) driver might not be able to accurately access PCI regions in this case, and (b) trigger a fatal error _during_ the recovery steps is a mistake that could prevent the recovery path to complete successfully. Reported-by: Harsha Thyagaraja Signed-off-by: Guilherme G. Piccoli Signed-off-by: David S. Miller --- .../net/ethernet/chelsio/cxgb4/cxgb4_main.c | 21 ++++++++++++------- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 9 ++++++-- 2 files changed, 20 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 38a5c6764bb5..b512149684fd 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -2771,6 +2771,9 @@ void t4_fatal_err(struct adapter *adap) { int port; + if (pci_channel_offline(adap->pdev)) + return; + /* Disable the SGE since ULDs are going to free resources that * could be exposed to the adapter. RDMA MWs for example... */ @@ -3882,9 +3885,10 @@ static pci_ers_result_t eeh_err_detected(struct pci_dev *pdev, spin_lock(&adap->stats_lock); for_each_port(adap, i) { struct net_device *dev = adap->port[i]; - - netif_device_detach(dev); - netif_carrier_off(dev); + if (dev) { + netif_device_detach(dev); + netif_carrier_off(dev); + } } spin_unlock(&adap->stats_lock); disable_interrupts(adap); @@ -3963,12 +3967,13 @@ static void eeh_resume(struct pci_dev *pdev) rtnl_lock(); for_each_port(adap, i) { struct net_device *dev = adap->port[i]; - - if (netif_running(dev)) { - link_start(dev); - cxgb_set_rxmode(dev); + if (dev) { + if (netif_running(dev)) { + link_start(dev); + cxgb_set_rxmode(dev); + } + netif_device_attach(dev); } - netif_device_attach(dev); } rtnl_unlock(); } diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index aded42b96f6d..3a34aa629f7d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -4557,8 +4557,13 @@ void t4_intr_enable(struct adapter *adapter) */ void t4_intr_disable(struct adapter *adapter) { - u32 whoami = t4_read_reg(adapter, PL_WHOAMI_A); - u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ? + u32 whoami, pf; + + if (pci_channel_offline(adapter->pdev)) + return; + + whoami = t4_read_reg(adapter, PL_WHOAMI_A); + pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ? SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami); t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), 0); From 5ee6842cd8aff517701549463927cb1e5eb50b01 Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Mon, 29 May 2017 09:22:06 +0300 Subject: [PATCH 0263/1065] Documentation: networking: add DPAA Ethernet document Signed-off-by: Madalin Bucur Signed-off-by: Camelia Groza Signed-off-by: David S. Miller --- Documentation/networking/dpaa.txt | 194 ++++++++++++++++++++++++++++++ 1 file changed, 194 insertions(+) create mode 100644 Documentation/networking/dpaa.txt diff --git a/Documentation/networking/dpaa.txt b/Documentation/networking/dpaa.txt new file mode 100644 index 000000000000..76e016d4d344 --- /dev/null +++ b/Documentation/networking/dpaa.txt @@ -0,0 +1,194 @@ +The QorIQ DPAA Ethernet Driver +============================== + +Authors: +Madalin Bucur +Camelia Groza + +Contents +======== + + - DPAA Ethernet Overview + - DPAA Ethernet Supported SoCs + - Configuring DPAA Ethernet in your kernel + - DPAA Ethernet Frame Processing + - DPAA Ethernet Features + - Debugging + +DPAA Ethernet Overview +====================== + +DPAA stands for Data Path Acceleration Architecture and it is a +set of networking acceleration IPs that are available on several +generations of SoCs, both on PowerPC and ARM64. + +The Freescale DPAA architecture consists of a series of hardware blocks +that support Ethernet connectivity. The Ethernet driver depends upon the +following drivers in the Linux kernel: + + - Peripheral Access Memory Unit (PAMU) (* needed only for PPC platforms) + drivers/iommu/fsl_* + - Frame Manager (FMan) + drivers/net/ethernet/freescale/fman + - Queue Manager (QMan), Buffer Manager (BMan) + drivers/soc/fsl/qbman + +A simplified view of the dpaa_eth interfaces mapped to FMan MACs: + + dpaa_eth /eth0\ ... /ethN\ + driver | | | | + ------------- ---- ----------- ---- ------------- + -Ports / Tx Rx \ ... / Tx Rx \ + FMan | | | | + -MACs | MAC0 | | MACN | + / dtsec0 \ ... / dtsecN \ (or tgec) + / \ / \(or memac) + --------- -------------- --- -------------- --------- + FMan, FMan Port, FMan SP, FMan MURAM drivers + --------------------------------------------------------- + FMan HW blocks: MURAM, MACs, Ports, SP + --------------------------------------------------------- + +The dpaa_eth relation to the QMan, BMan and FMan: + ________________________________ + dpaa_eth / eth0 \ + driver / \ + --------- -^- -^- -^- --- --------- + QMan driver / \ / \ / \ \ / | BMan | + |Rx | |Rx | |Tx | |Tx | | driver | + --------- |Dfl| |Err| |Cnf| |FQs| | | + QMan HW |FQ | |FQ | |FQs| | | | | + / \ / \ / \ \ / | | + --------- --- --- --- -v- --------- + | FMan QMI | | + | FMan HW FMan BMI | BMan HW | + ----------------------- -------- + +where the acronyms used above (and in the code) are: +DPAA = Data Path Acceleration Architecture +FMan = DPAA Frame Manager +QMan = DPAA Queue Manager +BMan = DPAA Buffers Manager +QMI = QMan interface in FMan +BMI = BMan interface in FMan +FMan SP = FMan Storage Profiles +MURAM = Multi-user RAM in FMan +FQ = QMan Frame Queue +Rx Dfl FQ = default reception FQ +Rx Err FQ = Rx error frames FQ +Tx Cnf FQ = Tx confirmation FQs +Tx FQs = transmission frame queues +dtsec = datapath three speed Ethernet controller (10/100/1000 Mbps) +tgec = ten gigabit Ethernet controller (10 Gbps) +memac = multirate Ethernet MAC (10/100/1000/10000) + +DPAA Ethernet Supported SoCs +============================ + +The DPAA drivers enable the Ethernet controllers present on the following SoCs: + +# PPC +P1023 +P2041 +P3041 +P4080 +P5020 +P5040 +T1023 +T1024 +T1040 +T1042 +T2080 +T4240 +B4860 + +# ARM +LS1043A +LS1046A + +Configuring DPAA Ethernet in your kernel +======================================== + +To enable the DPAA Ethernet driver, the following Kconfig options are required: + +# common for arch/arm64 and arch/powerpc platforms +CONFIG_FSL_DPAA=y +CONFIG_FSL_FMAN=y +CONFIG_FSL_DPAA_ETH=y +CONFIG_FSL_XGMAC_MDIO=y + +# for arch/powerpc only +CONFIG_FSL_PAMU=y + +# common options needed for the PHYs used on the RDBs +CONFIG_VITESSE_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_AQUANTIA_PHY=y + +DPAA Ethernet Frame Processing +============================== + +On Rx, buffers for the incoming frames are retrieved from one of the three +existing buffers pools. The driver initializes and seeds these, each with +buffers of different sizes: 1KB, 2KB and 4KB. + +On Tx, all transmitted frames are returned to the driver through Tx +confirmation frame queues. The driver is then responsible for freeing the +buffers. In order to do this properly, a backpointer is added to the buffer +before transmission that points to the skb. When the buffer returns to the +driver on a confirmation FQ, the skb can be correctly consumed. + +DPAA Ethernet Features +====================== + +Currently the DPAA Ethernet driver enables the basic features required for +a Linux Ethernet driver. The support for advanced features will be added +gradually. + +The driver has Rx and Tx checksum offloading for UDP and TCP. Currently the Rx +checksum offload feature is enabled by default and cannot be controlled through +ethtool. + +The driver has support for multiple prioritized Tx traffic classes. Priorities +range from 0 (lowest) to 3 (highest). These are mapped to HW workqueues with +strict priority levels. Each traffic class contains NR_CPU TX queues. By +default, only one traffic class is enabled and the lowest priority Tx queues +are used. Higher priority traffic classes can be enabled with the mqprio +qdisc. For example, all four traffic classes are enabled on an interface with +the following command. Furthermore, skb priority levels are mapped to traffic +classes as follows: + + * priorities 0 to 3 - traffic class 0 (low priority) + * priorities 4 to 7 - traffic class 1 (medium-low priority) + * priorities 8 to 11 - traffic class 2 (medium-high priority) + * priorities 12 to 15 - traffic class 3 (high priority) + +tc qdisc add dev root handle 1: \ + mqprio num_tc 4 map 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 hw 1 + +Debugging +========= + +The following statistics are exported for each interface through ethtool: + + - interrupt count per CPU + - Rx packets count per CPU + - Tx packets count per CPU + - Tx confirmed packets count per CPU + - Tx S/G frames count per CPU + - Tx error count per CPU + - Rx error count per CPU + - Rx error count per type + - congestion related statistics: + - congestion status + - time spent in congestion + - number of time the device entered congestion + - dropped packets count per cause + +The driver also exports the following information in sysfs: + + - the FQ IDs for each FQ type + /sys/devices/platform/dpaa-ethernet.0/net//fqids + + - the IDs of the buffer pools in use + /sys/devices/platform/dpaa-ethernet.0/net//bpids From 512c7840cd692fdac0333684249753ebf3c819f9 Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Mon, 29 May 2017 11:24:49 +0300 Subject: [PATCH 0264/1065] qed: Don't log missing periodic stats by default Current implementation lacks the logic for providing management firmware with RDMA-related statistics; [much] worse than that - it logs such events by default to system logs. Since the statistics' gathering is done periodically, using sufficiently new management firmware the system logs would get filled with these unnecessary prints. For now, reduce the verbosity of the log so that it would not be logged by default. Fixes: 6c75424612a7 ("qed: Add support for NCSI statistics") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 537d1236a4fe..715b3aaf83ac 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -1730,7 +1730,8 @@ void qed_get_protocol_stats(struct qed_dev *cdev, qed_get_protocol_stats_iscsi(cdev, &stats->iscsi_stats); break; default: - DP_ERR(cdev, "Invalid protocol type = %d\n", type); + DP_VERBOSE(cdev, QED_MSG_SP, + "Invalid protocol type = %d\n", type); return; } } From 59b2c3140f329e5817197f84860f3fa61a742fdf Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 29 May 2017 14:56:01 +0200 Subject: [PATCH 0265/1065] net: dsa: mv88e6xxx: Add missing static to stub functions 'static' was not enough, the helpers must be 'static inline' net/dsa/mv88e6xxx/global2.h:123:12: error: 'mv88e6xxx_g2_misc_4_bit_port' defined but not used [-Werror=unused-function] net/dsa/mv88e6xxx/global2.h:117:12: error: 'mv88e6xxx_g2_pvt_write' defined but not used [-Werror=unused-function] Fixes: c21fbe29f858 ("net: dsa: mv88e6xxx: Add missing static to stub functions") Signed-off-by: Arnd Bergmann Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/global2.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/global2.h b/drivers/net/dsa/mv88e6xxx/global2.h index d8d3c5abb2a1..14c0be98e0a4 100644 --- a/drivers/net/dsa/mv88e6xxx/global2.h +++ b/drivers/net/dsa/mv88e6xxx/global2.h @@ -114,13 +114,13 @@ static inline int mv88e6xxx_g2_set_eeprom16(struct mv88e6xxx_chip *chip, return -EOPNOTSUPP; } -static int mv88e6xxx_g2_pvt_write(struct mv88e6xxx_chip *chip, int src_dev, - int src_port, u16 data) +static inline int mv88e6xxx_g2_pvt_write(struct mv88e6xxx_chip *chip, + int src_dev, int src_port, u16 data) { return -EOPNOTSUPP; } -static int mv88e6xxx_g2_misc_4_bit_port(struct mv88e6xxx_chip *chip) +static inline int mv88e6xxx_g2_misc_4_bit_port(struct mv88e6xxx_chip *chip) { return -EOPNOTSUPP; } From f0d7ae95fff4ab444b8433f07afc4b077ef1a285 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 29 May 2017 15:00:17 +0200 Subject: [PATCH 0266/1065] net/mlx5: avoid build warning for uniprocessor Building the driver with CONFIG_SMP disabled results in a harmless warning: ethernet/mellanox/mlx5/core/main.c: In function 'mlx5_irq_set_affinity_hint': ethernet/mellanox/mlx5/core/main.c:615:6: error: unused variable 'irq' [-Werror=unused-variable] It's better to express the conditional compilation using IS_ENABLED() here, as that lets the compiler see what the intented use for the variable is, and that it can be silently discarded. Fixes: b665d98edc9a ("net/mlx5: Tolerate irq_set_affinity_hint() failures") Signed-off-by: Arnd Bergmann Acked-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index fe5546bb4153..af945edfee19 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -621,10 +621,9 @@ static int mlx5_irq_set_affinity_hint(struct mlx5_core_dev *mdev, int i) cpumask_set_cpu(cpumask_local_spread(i, priv->numa_node), priv->irq_info[i].mask); -#ifdef CONFIG_SMP - if (irq_set_affinity_hint(irq, priv->irq_info[i].mask)) + if (IS_ENABLED(CONFIG_SMP) && + irq_set_affinity_hint(irq, priv->irq_info[i].mask)) mlx5_core_warn(mdev, "irq_set_affinity_hint failed, irq 0x%.4x", irq); -#endif return 0; } From 5a1d08726230ead4817e9c22f2736b9ff21bf6af Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 30 May 2017 11:44:04 +0300 Subject: [PATCH 0267/1065] MAINTAINERS: Update MELLANOX MLX4 core VPI driver maintainer Add myself as a maintainer for mlx4 core driver, replacing Yishai Hadas. Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9e984645c4b0..d9d5398d0a49 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8508,7 +8508,7 @@ S: Odd Fixes F: drivers/media/radio/radio-miropcm20* MELLANOX MLX4 core VPI driver -M: Yishai Hadas +M: Tariq Toukan L: netdev@vger.kernel.org L: linux-rdma@vger.kernel.org W: http://www.mellanox.com From 39acf4e242621bd2b5d992a7ef2fd3358065d576 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 30 May 2017 11:44:05 +0300 Subject: [PATCH 0268/1065] MAINTAINERS: Move mlx4 rdma header file to IB driver charge It belongs there, should not be under mlx4 Core driver. Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index d9d5398d0a49..0dbc20c963c4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8516,7 +8516,6 @@ Q: http://patchwork.ozlabs.org/project/netdev/list/ S: Supported F: drivers/net/ethernet/mellanox/mlx4/ F: include/linux/mlx4/ -F: include/uapi/rdma/mlx4-abi.h MELLANOX MLX4 IB driver M: Yishai Hadas @@ -8526,6 +8525,7 @@ Q: http://patchwork.kernel.org/project/linux-rdma/list/ S: Supported F: drivers/infiniband/hw/mlx4/ F: include/linux/mlx4/ +F: include/uapi/rdma/mlx4-abi.h MELLANOX MLX5 core VPI driver M: Saeed Mahameed From 177567580aa1c3ec6e900b25280a52f02f93469f Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 30 May 2017 11:44:06 +0300 Subject: [PATCH 0269/1065] MAINTAINERS: Move mlx5 rdma header file to IB driver charge It belongs there, should not be under mlx5 Core driver. Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0dbc20c963c4..0f92a2ff4b12 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8538,7 +8538,6 @@ Q: http://patchwork.ozlabs.org/project/netdev/list/ S: Supported F: drivers/net/ethernet/mellanox/mlx5/core/ F: include/linux/mlx5/ -F: include/uapi/rdma/mlx5-abi.h MELLANOX MLX5 IB driver M: Matan Barak @@ -8549,6 +8548,7 @@ Q: http://patchwork.kernel.org/project/linux-rdma/list/ S: Supported F: drivers/infiniband/hw/mlx5/ F: include/linux/mlx5/ +F: include/uapi/rdma/mlx5-abi.h MELEXIS MLX90614 DRIVER M: Crt Mori From e4dc2b32df5573b077f6723e01cf761d236d5113 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 30 May 2017 14:39:11 -0400 Subject: [PATCH 0270/1065] blk-mq: Take tagset lock when updating hw queues The tagset lock needs to be held when iterating the tag_list, so a lockdep assert was added when updating number of hardware queues. The drivers calling this API, however, were unaware of the new requirement, so are failing the assertion. This patch takes the lock within the blk-mq function so the drivers do not have to be modified in order to be safe. Fixes: 705cda97e ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list") Reported-by: Gabriel Krisman Bertazi Reviewed-by: Bart Van Assche Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- block/blk-mq.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index f2224ffd225d..1bcccedcc74f 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -2641,7 +2641,8 @@ int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr) return ret; } -void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues) +static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, + int nr_hw_queues) { struct request_queue *q; @@ -2665,6 +2666,13 @@ void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues) list_for_each_entry(q, &set->tag_list, tag_set_list) blk_mq_unfreeze_queue(q); } + +void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues) +{ + mutex_lock(&set->tag_list_lock); + __blk_mq_update_nr_hw_queues(set, nr_hw_queues); + mutex_unlock(&set->tag_list_lock); +} EXPORT_SYMBOL_GPL(blk_mq_update_nr_hw_queues); /* Enable polling stats and return whether they were already enabled. */ From f511c0b17b081562dca8ac5061dfa86db4c66cc2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 30 May 2017 12:38:59 -0700 Subject: [PATCH 0271/1065] "Yes, people use FOLL_FORCE ;)" This effectively reverts commit 8ee74a91ac30 ("proc: try to remove use of FOLL_FORCE entirely") It turns out that people do depend on FOLL_FORCE for the /proc//mem case, and we're talking not just debuggers. Talking to the affected people, the use-cases are: Keno Fischer: "We used these semantics as a hardening mechanism in the julia JIT. By opening /proc/self/mem and using these semantics, we could avoid needing RWX pages, or a dual mapping approach. We do have fallbacks to these other methods (though getting EIO here actually causes an assert in released versions - we'll updated that to make sure to take the fall back in that case). Nevertheless the /proc/self/mem approach was our favored approach because it a) Required an attacker to be able to execute syscalls which is a taller order than getting memory write and b) didn't double the virtual address space requirements (as a dual mapping approach would). I think in general this feature is very useful for anybody who needs to precisely control the execution of some other process. Various debuggers (gdb/lldb/rr) certainly fall into that category, but there's another class of such processes (wine, various emulators) which may want to do that kind of thing. Now, I suspect most of these will have the other process under ptrace control, so maybe allowing (same_mm || ptraced) would be ok, but at least for the sandbox/remote-jit use case, it would be perfectly reasonable to not have the jit server be a ptracer" Robert O'Callahan: "We write to readonly code and data mappings via /proc/.../mem in lots of different situations, particularly when we're adjusting program state during replay to match the recorded execution. Like Julia, we can add workarounds, but they could be expensive." so not only do people use FOLL_FORCE for both reads and writes, but they use it for both the local mm and remote mm. With these comments in mind, we likely also cannot add the "are we actively ptracing" check either, so this keeps the new code organization and does not do a real revert that would add back the original comment about "Maybe we should limit FOLL_FORCE to actual ptrace users?" Reported-by: Keno Fischer Reported-by: Robert O'Callahan Cc: Kees Cook Cc: Andy Lutomirski Cc: Eric Biederman Signed-off-by: Linus Torvalds --- fs/proc/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index 45f6bf68fff3..f1e1927ccd48 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -821,7 +821,7 @@ static ssize_t mem_rw(struct file *file, char __user *buf, if (!mmget_not_zero(mm)) goto free; - flags = write ? FOLL_WRITE : 0; + flags = FOLL_FORCE | (write ? FOLL_WRITE : 0); while (count > 0) { int this_len = min_t(int, count, PAGE_SIZE); From 08fd5e76c268b7a5353302825b6b63a6027ddd0a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 27 May 2017 06:50:05 -0700 Subject: [PATCH 0272/1065] hwmon: (aspeed-pwm-tacho) Select REGMAP The driver uses regmap and thus has to select it to avoid build errors such as the following. drivers/hwmon/aspeed-pwm-tacho.c:337:21: error: variable 'aspeed_pwm_tacho_regmap_config' has initializer but incomplete type Reported-by: kbuild test robot Acked-by: Joel Stanley Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck --- drivers/hwmon/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 22d5eafd6815..5ef2814345ef 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -343,6 +343,7 @@ config SENSORS_ASB100 config SENSORS_ASPEED tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" + select REGMAP help This driver provides support for ASPEED AST2400/AST2500 PWM and Fan Tacho controllers. From 7ed1c5e5ddbb87aef9df7f8a8a714bcffe90f0eb Mon Sep 17 00:00:00 2001 From: Patrick Venture Date: Tue, 30 May 2017 12:42:01 -0700 Subject: [PATCH 0273/1065] hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT When the controller fails to provide an RPM reading within the alloted time; the driver returns -ETIMEDOUT and no file contents. Signed-off-by: Patrick Venture Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck --- drivers/hwmon/aspeed-pwm-tacho.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c index 48403a2115be..12b716b70ead 100644 --- a/drivers/hwmon/aspeed-pwm-tacho.c +++ b/drivers/hwmon/aspeed-pwm-tacho.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -494,7 +495,7 @@ static u32 aspeed_get_fan_tach_ch_measure_period(struct aspeed_pwm_tacho_data return clk / (clk_unit * div_h * div_l * tacho_div * tacho_unit); } -static u32 aspeed_get_fan_tach_ch_rpm(struct aspeed_pwm_tacho_data *priv, +static int aspeed_get_fan_tach_ch_rpm(struct aspeed_pwm_tacho_data *priv, u8 fan_tach_ch) { u32 raw_data, tach_div, clk_source, sec, val; @@ -510,6 +511,9 @@ static u32 aspeed_get_fan_tach_ch_rpm(struct aspeed_pwm_tacho_data *priv, msleep(sec); regmap_read(priv->regmap, ASPEED_PTCR_RESULT, &val); + if (!(val & RESULT_STATUS_MASK)) + return -ETIMEDOUT; + raw_data = val & RESULT_VALUE_MASK; tach_div = priv->type_fan_tach_clock_division[type]; tach_div = 0x4 << (tach_div * 2); @@ -561,12 +565,14 @@ static ssize_t show_rpm(struct device *dev, struct device_attribute *attr, { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int index = sensor_attr->index; - u32 rpm; + int rpm; struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev); rpm = aspeed_get_fan_tach_ch_rpm(priv, index); + if (rpm < 0) + return rpm; - return sprintf(buf, "%u\n", rpm); + return sprintf(buf, "%d\n", rpm); } static umode_t pwm_is_visible(struct kobject *kobj, From efd11cc8fa1a6d8aba16bd6aaa774ecc3d02145f Mon Sep 17 00:00:00 2001 From: Mark yao Date: Sat, 27 May 2017 19:43:36 +0800 Subject: [PATCH 0274/1065] drm/rockchip: Correct vop out_mode configure Force vop output mode on encoder driver seem not a good idea, EDP, HDMI, DisplayPort all have 10bit input on rk3399, On non-10bit vop, vop 8bit output bit[0-7] connect to the encoder high 8bit [2-9]. So force RGB10 to RGB888 on vop driver would be better. And another problem, EDP check crtc id on atomic_check, but encoder maybe NULL, so out_mode configure would fail, it cause edp no display. Signed-off-by: Mark Yao Reviewed-by: Jeffy Chen Link: http://patchwork.freedesktop.org/patch/msgid/1495885416-22216-1-git-send-email-mark.yao@rock-chips.com --- drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 12 ------------ drivers/gpu/drm/rockchip/cdn-dp-core.c | 9 ++------- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 8 ++++++++ drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 3 +++ drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 2 ++ 5 files changed, 15 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index d8fa7a9c9240..ce5f2d1f9994 100644 --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c @@ -245,8 +245,6 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder, struct drm_connector_state *conn_state) { struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state); - struct rockchip_dp_device *dp = to_dp(encoder); - int ret; /* * The hardware IC designed that VOP must output the RGB10 video @@ -258,16 +256,6 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder, s->output_mode = ROCKCHIP_OUT_MODE_AAAA; s->output_type = DRM_MODE_CONNECTOR_eDP; - if (dp->data->chip_type == RK3399_EDP) { - /* - * For RK3399, VOP Lit must code the out mode to RGB888, - * VOP Big must code the out mode to RGB10. - */ - ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, - encoder); - if (ret > 0) - s->output_mode = ROCKCHIP_OUT_MODE_P888; - } return 0; } diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c index a2169dd3d26b..14fa1f8351e8 100644 --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c @@ -615,7 +615,6 @@ static void cdn_dp_encoder_enable(struct drm_encoder *encoder) { struct cdn_dp_device *dp = encoder_to_dp(encoder); int ret, val; - struct rockchip_crtc_state *state; ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder); if (ret < 0) { @@ -625,14 +624,10 @@ static void cdn_dp_encoder_enable(struct drm_encoder *encoder) DRM_DEV_DEBUG_KMS(dp->dev, "vop %s output to cdn-dp\n", (ret) ? "LIT" : "BIG"); - state = to_rockchip_crtc_state(encoder->crtc->state); - if (ret) { + if (ret) val = DP_SEL_VOP_LIT | (DP_SEL_VOP_LIT << 16); - state->output_mode = ROCKCHIP_OUT_MODE_P888; - } else { + else val = DP_SEL_VOP_LIT << 16; - state->output_mode = ROCKCHIP_OUT_MODE_AAAA; - } ret = cdn_dp_grf_write(dp, GRF_SOC_CON9, val); if (ret) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index 3f7a82d1e095..45589d6ce65e 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -875,6 +875,7 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc, static void vop_crtc_enable(struct drm_crtc *crtc) { struct vop *vop = to_vop(crtc); + const struct vop_data *vop_data = vop->data; struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc->state); struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode; u16 hsync_len = adjusted_mode->hsync_end - adjusted_mode->hsync_start; @@ -967,6 +968,13 @@ static void vop_crtc_enable(struct drm_crtc *crtc) DRM_DEV_ERROR(vop->dev, "unsupported connector_type [%d]\n", s->output_type); } + + /* + * if vop is not support RGB10 output, need force RGB10 to RGB888. + */ + if (s->output_mode == ROCKCHIP_OUT_MODE_AAAA && + !(vop_data->feature & VOP_FEATURE_OUTPUT_RGB10)) + s->output_mode = ROCKCHIP_OUT_MODE_P888; VOP_CTRL_SET(vop, out_mode, s->output_mode); VOP_CTRL_SET(vop, htotal_pw, (htotal << 16) | hsync_len); diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h index 5a4faa85dbd2..9979fd0c2282 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h @@ -142,6 +142,9 @@ struct vop_data { const struct vop_intr *intr; const struct vop_win_data *win; unsigned int win_size; + +#define VOP_FEATURE_OUTPUT_RGB10 BIT(0) + u64 feature; }; /* interrupt define */ diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c index 0da44442aab0..bafd698a28b1 100644 --- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c +++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c @@ -275,6 +275,7 @@ static const struct vop_intr rk3288_vop_intr = { static const struct vop_data rk3288_vop = { .init_table = rk3288_init_reg_table, .table_size = ARRAY_SIZE(rk3288_init_reg_table), + .feature = VOP_FEATURE_OUTPUT_RGB10, .intr = &rk3288_vop_intr, .ctrl = &rk3288_ctrl_data, .win = rk3288_vop_win_data, @@ -343,6 +344,7 @@ static const struct vop_reg_data rk3399_init_reg_table[] = { static const struct vop_data rk3399_vop_big = { .init_table = rk3399_init_reg_table, .table_size = ARRAY_SIZE(rk3399_init_reg_table), + .feature = VOP_FEATURE_OUTPUT_RGB10, .intr = &rk3399_vop_intr, .ctrl = &rk3399_ctrl_data, /* From 64188cfbe5245d412de2139a3864e4e00b4136f0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 30 May 2017 09:23:41 +0200 Subject: [PATCH 0275/1065] Revert "ALSA: usb-audio: purge needless variable length array" This reverts commit 89b593c30e83 ("ALSA: usb-audio: purge needless variable length array"). The patch turned out to cause a severe regression, triggering an Oops at snd_usb_ctl_msg(). It was overseen that snd_usb_ctl_msg() writes back the response to the given buffer, while the patch changed it to a read-only const buffer. (One should always double-check when an extra pointer cast is present...) As a simple fix, just revert the affected commit. It was merely a cleanup. Although it brings VLA again, it's clearer as a fix. We'll address the VLA later in another patch. Fixes: 89b593c30e83 ("ALSA: usb-audio: purge needless variable length array") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195875 Cc: # v4.11+ Signed-off-by: Takashi Iwai --- sound/usb/mixer_us16x08.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/usb/mixer_us16x08.c b/sound/usb/mixer_us16x08.c index dc48eedea92e..29d2c9282987 100644 --- a/sound/usb/mixer_us16x08.c +++ b/sound/usb/mixer_us16x08.c @@ -698,12 +698,12 @@ static int snd_us16x08_meter_get(struct snd_kcontrol *kcontrol, struct snd_usb_audio *chip = elem->head.mixer->chip; struct snd_us16x08_meter_store *store = elem->private_data; u8 meter_urb[64]; - char tmp[sizeof(mix_init_msg2)] = {0}; + char tmp[max(sizeof(mix_init_msg1), sizeof(mix_init_msg2))]; switch (kcontrol->private_value) { case 0: - snd_us16x08_send_urb(chip, (char *)mix_init_msg1, - sizeof(mix_init_msg1)); + memcpy(tmp, mix_init_msg1, sizeof(mix_init_msg1)); + snd_us16x08_send_urb(chip, tmp, 4); snd_us16x08_recv_urb(chip, meter_urb, sizeof(meter_urb)); kcontrol->private_value++; @@ -721,7 +721,7 @@ static int snd_us16x08_meter_get(struct snd_kcontrol *kcontrol, case 3: memcpy(tmp, mix_init_msg2, sizeof(mix_init_msg2)); tmp[2] = snd_get_meter_comp_index(store); - snd_us16x08_send_urb(chip, tmp, sizeof(mix_init_msg2)); + snd_us16x08_send_urb(chip, tmp, 10); snd_us16x08_recv_urb(chip, meter_urb, sizeof(meter_urb)); kcontrol->private_value = 0; From 617163fc2580da3d489b6c1bacb6312e0e2aac02 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 30 May 2017 23:21:07 +0200 Subject: [PATCH 0276/1065] ALSA: usb: Fix a typo in Tascam US-16x08 mixer element A mixer element created in a quirk for Tascam US-16x08 contains a typo: it should be "EQ MidLow Q" instead of "EQ MidQLow Q". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195875 Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Cc: # v4.11+ Signed-off-by: Takashi Iwai --- sound/usb/mixer_us16x08.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/mixer_us16x08.c b/sound/usb/mixer_us16x08.c index 29d2c9282987..442d8f7998e3 100644 --- a/sound/usb/mixer_us16x08.c +++ b/sound/usb/mixer_us16x08.c @@ -1135,7 +1135,7 @@ static const struct snd_us16x08_control_params eq_controls[] = { .control_id = SND_US16X08_ID_EQLOWMIDWIDTH, .type = USB_MIXER_U8, .num_channels = 16, - .name = "EQ MidQLow Q", + .name = "EQ MidLow Q", }, { /* EQ mid high gain */ .kcontrol_new = &snd_us16x08_eq_gain_ctl, From e49a14fa36aeb72476e038fcde96c151b7e4ecc8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 30 May 2017 23:24:45 +0200 Subject: [PATCH 0277/1065] ALSA: usb: Avoid VLA in mixer_us16x08.c This is another attempt to work around the VLA used in mixer_us16x08.c. Basically the temporary array is used individually for two cases, and we can declare locally in each block, instead of hackish max() usage. Signed-off-by: Takashi Iwai --- sound/usb/mixer_us16x08.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/sound/usb/mixer_us16x08.c b/sound/usb/mixer_us16x08.c index 442d8f7998e3..26ed23b18b77 100644 --- a/sound/usb/mixer_us16x08.c +++ b/sound/usb/mixer_us16x08.c @@ -698,16 +698,18 @@ static int snd_us16x08_meter_get(struct snd_kcontrol *kcontrol, struct snd_usb_audio *chip = elem->head.mixer->chip; struct snd_us16x08_meter_store *store = elem->private_data; u8 meter_urb[64]; - char tmp[max(sizeof(mix_init_msg1), sizeof(mix_init_msg2))]; switch (kcontrol->private_value) { - case 0: + case 0: { + char tmp[sizeof(mix_init_msg1)]; + memcpy(tmp, mix_init_msg1, sizeof(mix_init_msg1)); snd_us16x08_send_urb(chip, tmp, 4); snd_us16x08_recv_urb(chip, meter_urb, sizeof(meter_urb)); kcontrol->private_value++; break; + } case 1: snd_us16x08_recv_urb(chip, meter_urb, sizeof(meter_urb)); @@ -718,7 +720,9 @@ static int snd_us16x08_meter_get(struct snd_kcontrol *kcontrol, sizeof(meter_urb)); kcontrol->private_value++; break; - case 3: + case 3: { + char tmp[sizeof(mix_init_msg2)]; + memcpy(tmp, mix_init_msg2, sizeof(mix_init_msg2)); tmp[2] = snd_get_meter_comp_index(store); snd_us16x08_send_urb(chip, tmp, 10); @@ -727,6 +731,7 @@ static int snd_us16x08_meter_get(struct snd_kcontrol *kcontrol, kcontrol->private_value = 0; break; } + } for (set = 0; set < 6; set++) get_meter_levels_from_urb(set, store, meter_urb); From 869e188a35c93f1bad7bf16c32f34a6feb5f79f1 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 31 May 2017 10:38:13 +0200 Subject: [PATCH 0278/1065] drm: Fix locking in drm_atomic_helper_resume In the conversion to drop drm_modeset_lock_all and the magic implicit context I failed to realize that _resume starts out with a pile of state copies, but not with the locks. And hence drm_atomic_commit won't grab these for us. v2: Add locking checks in helpers to make sure we catch this in the future. Note we can only require the locks in the atomic_check phase, not in the commit phase. But since any commit is guaranteed to first run the checks (even for the resume stuff where we use stored duplicated old state) this should give us full coverage. Requested by Maarten. Cc: Jyri Sarha Fixes: a5b8444e289c ("drm/atomic-helper: remove modeset_lock_all from helper_resume") Cc: Maarten Lankhorst Reviewed-by: Maarten Lankhorst Cc: Daniel Vetter Cc: Jani Nikula Cc: Sean Paul Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170531083813.1390-1-daniel.vetter@ffwll.ch --- drivers/gpu/drm/drm_atomic_helper.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 8be9719284b0..aa885a614e27 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -508,6 +508,8 @@ drm_atomic_helper_check_modeset(struct drm_device *dev, bool has_connectors = !!new_crtc_state->connector_mask; + WARN_ON(!drm_modeset_is_locked(&crtc->mutex)); + if (!drm_mode_equal(&old_crtc_state->mode, &new_crtc_state->mode)) { DRM_DEBUG_ATOMIC("[CRTC:%d:%s] mode changed\n", crtc->base.id, crtc->name); @@ -551,6 +553,8 @@ drm_atomic_helper_check_modeset(struct drm_device *dev, for_each_oldnew_connector_in_state(state, connector, old_connector_state, new_connector_state, i) { const struct drm_connector_helper_funcs *funcs = connector->helper_private; + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); + /* * This only sets crtc->connectors_changed for routing changes, * drivers must set crtc->connectors_changed themselves when @@ -650,6 +654,8 @@ drm_atomic_helper_check_planes(struct drm_device *dev, for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { const struct drm_plane_helper_funcs *funcs; + WARN_ON(!drm_modeset_is_locked(&plane->mutex)); + funcs = plane->helper_private; drm_atomic_helper_plane_changed(state, old_plane_state, new_plane_state, plane); @@ -2663,7 +2669,12 @@ int drm_atomic_helper_resume(struct drm_device *dev, drm_modeset_acquire_init(&ctx, 0); while (1) { + err = drm_modeset_lock_all_ctx(dev, &ctx); + if (err) + goto out; + err = drm_atomic_helper_commit_duplicated_state(state, &ctx); +out: if (err != -EDEADLK) break; From ff0361b34ac63ef80c785c32d62e0e9d89a2cf89 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 31 May 2017 09:44:32 +0200 Subject: [PATCH 0279/1065] dm: make flush bios explicitly sync Commit b685d3d65ac7 ("block: treat REQ_FUA and REQ_PREFLUSH as synchronous") removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...} definitions. generic_make_request_checks() however strips REQ_FUA and REQ_PREFLUSH flags from a bio when the storage doesn't report volatile write cache and thus write effectively becomes asynchronous which can lead to performance regressions. Fix the problem by making sure all bios which are synchronous are properly marked with REQ_SYNC. Fixes: b685d3d65ac7 ("block: treat REQ_FUA and REQ_PREFLUSH as synchronous") Cc: stable@vger.kernel.org Signed-off-by: Jan Kara Signed-off-by: Mike Snitzer --- drivers/md/dm-bufio.c | 2 +- drivers/md/dm-integrity.c | 3 ++- drivers/md/dm-raid1.c | 2 +- drivers/md/dm-snap-persistent.c | 3 ++- drivers/md/dm.c | 2 +- 5 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c index cd8139593ccd..840c1496b2b1 100644 --- a/drivers/md/dm-bufio.c +++ b/drivers/md/dm-bufio.c @@ -1334,7 +1334,7 @@ int dm_bufio_issue_flush(struct dm_bufio_client *c) { struct dm_io_request io_req = { .bi_op = REQ_OP_WRITE, - .bi_op_flags = REQ_PREFLUSH, + .bi_op_flags = REQ_PREFLUSH | REQ_SYNC, .mem.type = DM_IO_KMEM, .mem.ptr.addr = NULL, .client = c->dm_io, diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index 1feeb2ccf5a1..7910bfe50da4 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -783,7 +783,8 @@ static void write_journal(struct dm_integrity_c *ic, unsigned commit_start, unsi for (i = 0; i < commit_sections; i++) rw_section_mac(ic, commit_start + i, true); } - rw_journal(ic, REQ_OP_WRITE, REQ_FUA, commit_start, commit_sections, &io_comp); + rw_journal(ic, REQ_OP_WRITE, REQ_FUA | REQ_SYNC, commit_start, + commit_sections, &io_comp); } else { unsigned to_end; io_comp.in_flight = (atomic_t)ATOMIC_INIT(2); diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index a95cbb80fb34..e61c45047c25 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -260,7 +260,7 @@ static int mirror_flush(struct dm_target *ti) struct mirror *m; struct dm_io_request io_req = { .bi_op = REQ_OP_WRITE, - .bi_op_flags = REQ_PREFLUSH, + .bi_op_flags = REQ_PREFLUSH | REQ_SYNC, .mem.type = DM_IO_KMEM, .mem.ptr.addr = NULL, .client = ms->io_client, diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c index b93476c3ba3f..c5534d294773 100644 --- a/drivers/md/dm-snap-persistent.c +++ b/drivers/md/dm-snap-persistent.c @@ -741,7 +741,8 @@ static void persistent_commit_exception(struct dm_exception_store *store, /* * Commit exceptions to disk. */ - if (ps->valid && area_io(ps, REQ_OP_WRITE, REQ_PREFLUSH | REQ_FUA)) + if (ps->valid && area_io(ps, REQ_OP_WRITE, + REQ_PREFLUSH | REQ_FUA | REQ_SYNC)) ps->valid = 0; /* diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 6ef9500226c0..37ccd73c79ec 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1657,7 +1657,7 @@ static struct mapped_device *alloc_dev(int minor) bio_init(&md->flush_bio, NULL, 0); md->flush_bio.bi_bdev = md->bdev; - md->flush_bio.bi_opf = REQ_OP_WRITE | REQ_PREFLUSH; + md->flush_bio.bi_opf = REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC; dm_stats_init(&md->stats); From 63db7c815bc0997c29e484d2409684fdd9fcd93b Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Wed, 31 May 2017 08:22:52 -0700 Subject: [PATCH 0280/1065] xfs: use ->b_state to fix buffer I/O accounting release race We've had user reports of unmount hangs in xfs_wait_buftarg() that analysis shows is due to btp->bt_io_count == -1. bt_io_count represents the count of in-flight asynchronous buffers and thus should always be >= 0. xfs_wait_buftarg() waits for this value to stabilize to zero in order to ensure that all untracked (with respect to the lru) buffers have completed I/O processing before unmount proceeds to tear down in-core data structures. The value of -1 implies an I/O accounting decrement race. Indeed, the fact that xfs_buf_ioacct_dec() is called from xfs_buf_rele() (where the buffer lock is no longer held) means that bp->b_flags can be updated from an unsafe context. While a user-level reproducer is currently not available, some intrusive hacks to run racing buffer lookups/ioacct/releases from multiple threads was used to successfully manufacture this problem. Existing callers do not expect to acquire the buffer lock from xfs_buf_rele(). Therefore, we can not safely update ->b_flags from this context. It turns out that we already have separate buffer state bits and associated serialization for dealing with buffer LRU state in the form of ->b_state and ->b_lock. Therefore, replace the _XBF_IN_FLIGHT flag with a ->b_state variant, update the I/O accounting wrappers appropriately and make sure they are used with the correct locking. This ensures that buffer in-flight state can be modified at buffer release time without racing with modifications from a buffer lock holder. Fixes: 9c7504aa72b6 ("xfs: track and serialize in-flight async buffers against unmount") Cc: # v4.8+ Signed-off-by: Brian Foster Reviewed-by: Nikolay Borisov Tested-by: Libor Pechacek Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_buf.c | 38 ++++++++++++++++++++++++++------------ fs/xfs/xfs_buf.h | 5 ++--- 2 files changed, 28 insertions(+), 15 deletions(-) diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 62fa39276a24..07b77b73b024 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -97,27 +97,41 @@ static inline void xfs_buf_ioacct_inc( struct xfs_buf *bp) { - if (bp->b_flags & (XBF_NO_IOACCT|_XBF_IN_FLIGHT)) + if (bp->b_flags & XBF_NO_IOACCT) return; ASSERT(bp->b_flags & XBF_ASYNC); - bp->b_flags |= _XBF_IN_FLIGHT; - percpu_counter_inc(&bp->b_target->bt_io_count); + spin_lock(&bp->b_lock); + if (!(bp->b_state & XFS_BSTATE_IN_FLIGHT)) { + bp->b_state |= XFS_BSTATE_IN_FLIGHT; + percpu_counter_inc(&bp->b_target->bt_io_count); + } + spin_unlock(&bp->b_lock); } /* * Clear the in-flight state on a buffer about to be released to the LRU or * freed and unaccount from the buftarg. */ +static inline void +__xfs_buf_ioacct_dec( + struct xfs_buf *bp) +{ + ASSERT(spin_is_locked(&bp->b_lock)); + + if (bp->b_state & XFS_BSTATE_IN_FLIGHT) { + bp->b_state &= ~XFS_BSTATE_IN_FLIGHT; + percpu_counter_dec(&bp->b_target->bt_io_count); + } +} + static inline void xfs_buf_ioacct_dec( struct xfs_buf *bp) { - if (!(bp->b_flags & _XBF_IN_FLIGHT)) - return; - - bp->b_flags &= ~_XBF_IN_FLIGHT; - percpu_counter_dec(&bp->b_target->bt_io_count); + spin_lock(&bp->b_lock); + __xfs_buf_ioacct_dec(bp); + spin_unlock(&bp->b_lock); } /* @@ -149,9 +163,9 @@ xfs_buf_stale( * unaccounted (released to LRU) before that occurs. Drop in-flight * status now to preserve accounting consistency. */ - xfs_buf_ioacct_dec(bp); - spin_lock(&bp->b_lock); + __xfs_buf_ioacct_dec(bp); + atomic_set(&bp->b_lru_ref, 0); if (!(bp->b_state & XFS_BSTATE_DISPOSE) && (list_lru_del(&bp->b_target->bt_lru, &bp->b_lru))) @@ -979,12 +993,12 @@ xfs_buf_rele( * ensures the decrement occurs only once per-buf. */ if ((atomic_read(&bp->b_hold) == 1) && !list_empty(&bp->b_lru)) - xfs_buf_ioacct_dec(bp); + __xfs_buf_ioacct_dec(bp); goto out_unlock; } /* the last reference has been dropped ... */ - xfs_buf_ioacct_dec(bp); + __xfs_buf_ioacct_dec(bp); if (!(bp->b_flags & XBF_STALE) && atomic_read(&bp->b_lru_ref)) { /* * If the buffer is added to the LRU take a new reference to the diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h index 8d1d44f87ce9..1508121f29f2 100644 --- a/fs/xfs/xfs_buf.h +++ b/fs/xfs/xfs_buf.h @@ -63,7 +63,6 @@ typedef enum { #define _XBF_KMEM (1 << 21)/* backed by heap memory */ #define _XBF_DELWRI_Q (1 << 22)/* buffer on a delwri queue */ #define _XBF_COMPOUND (1 << 23)/* compound buffer */ -#define _XBF_IN_FLIGHT (1 << 25) /* I/O in flight, for accounting purposes */ typedef unsigned int xfs_buf_flags_t; @@ -84,14 +83,14 @@ typedef unsigned int xfs_buf_flags_t; { _XBF_PAGES, "PAGES" }, \ { _XBF_KMEM, "KMEM" }, \ { _XBF_DELWRI_Q, "DELWRI_Q" }, \ - { _XBF_COMPOUND, "COMPOUND" }, \ - { _XBF_IN_FLIGHT, "IN_FLIGHT" } + { _XBF_COMPOUND, "COMPOUND" } /* * Internal state flags. */ #define XFS_BSTATE_DISPOSE (1 << 0) /* buffer being discarded */ +#define XFS_BSTATE_IN_FLIGHT (1 << 1) /* I/O in flight */ /* * The xfs_buftarg contains 2 notions of "sector size" - From 5be6b75610cefd1e21b98a218211922c2feb6e08 Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Wed, 1 Mar 2017 09:02:33 +0800 Subject: [PATCH 0281/1065] cfq-iosched: fix the delay of cfq_group's vdisktime under iops mode When adding a cfq_group into the cfq service tree, we use CFQ_IDLE_DELAY as the delay of cfq_group's vdisktime if there have been other cfq_groups already. When cfq is under iops mode, commit 9a7f38c42c2b ("cfq-iosched: Convert from jiffies to nanoseconds") could result in a large iops delay and lead to an abnormal io schedule delay for the added cfq_group. To fix it, we just need to revert to the old CFQ_IDLE_DELAY value: HZ / 5 when iops mode is enabled. Despite having the same value, the delay of a cfq_queue in idle class and the delay of cfq_group are different things, so I define two new macros for the delay of a cfq_group under time-slice mode and iops mode. Fixes: 9a7f38c42c2b ("cfq-iosched: Convert from jiffies to nanoseconds") Cc: # 4.8+ Signed-off-by: Hou Tao Acked-by: Jan Kara Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index da69b079725f..b7e9c7feeab2 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -38,9 +38,13 @@ static const u64 cfq_target_latency = (u64)NSEC_PER_SEC * 3/10; /* 300 ms */ static const int cfq_hist_divisor = 4; /* - * offset from end of service tree + * offset from end of queue service tree for idle class */ #define CFQ_IDLE_DELAY (NSEC_PER_SEC / 5) +/* offset from end of group service tree under time slice mode */ +#define CFQ_SLICE_MODE_GROUP_DELAY (NSEC_PER_SEC / 5) +/* offset from end of group service under IOPS mode */ +#define CFQ_IOPS_MODE_GROUP_DELAY (HZ / 5) /* * below this threshold, we consider thinktime immediate @@ -1362,6 +1366,14 @@ cfq_group_service_tree_add(struct cfq_rb_root *st, struct cfq_group *cfqg) cfqg->vfraction = max_t(unsigned, vfr, 1); } +static inline u64 cfq_get_cfqg_vdisktime_delay(struct cfq_data *cfqd) +{ + if (!iops_mode(cfqd)) + return CFQ_SLICE_MODE_GROUP_DELAY; + else + return CFQ_IOPS_MODE_GROUP_DELAY; +} + static void cfq_group_notify_queue_add(struct cfq_data *cfqd, struct cfq_group *cfqg) { @@ -1381,7 +1393,8 @@ cfq_group_notify_queue_add(struct cfq_data *cfqd, struct cfq_group *cfqg) n = rb_last(&st->rb); if (n) { __cfqg = rb_entry_cfqg(n); - cfqg->vdisktime = __cfqg->vdisktime + CFQ_IDLE_DELAY; + cfqg->vdisktime = __cfqg->vdisktime + + cfq_get_cfqg_vdisktime_delay(cfqd); } else cfqg->vdisktime = st->min_vdisktime; cfq_group_service_tree_add(st, cfqg); From 5a8948f8a32ba56c17b3fb75d318ac98157f3ba5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 31 May 2017 09:44:33 +0200 Subject: [PATCH 0282/1065] md: Make flush bios explicitely sync Commit b685d3d65ac7 "block: treat REQ_FUA and REQ_PREFLUSH as synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...} definitions. generic_make_request_checks() however strips REQ_FUA and REQ_PREFLUSH flags from a bio when the storage doesn't report volatile write cache and thus write effectively becomes asynchronous which can lead to performance regressions Fix the problem by making sure all bios which are synchronous are properly marked with REQ_SYNC. CC: linux-raid@vger.kernel.org CC: Shaohua Li Fixes: b685d3d65ac791406e0dfd8779cc9b3707fea5a3 CC: stable@vger.kernel.org Signed-off-by: Jan Kara Signed-off-by: Shaohua Li --- drivers/md/md.c | 2 +- drivers/md/raid5-cache.c | 4 ++-- drivers/md/raid5-ppl.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 10367ffe92e3..212a6777ff31 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -765,7 +765,7 @@ void md_super_write(struct mddev *mddev, struct md_rdev *rdev, test_bit(FailFast, &rdev->flags) && !test_bit(LastDev, &rdev->flags)) ff = MD_FAILFAST; - bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH | REQ_FUA | ff; + bio->bi_opf = REQ_OP_WRITE | REQ_SYNC | REQ_PREFLUSH | REQ_FUA | ff; atomic_inc(&mddev->pending_writes); submit_bio(bio); diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 4c00bc248287..0a7af8b0a80a 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -1782,7 +1782,7 @@ static int r5l_log_write_empty_meta_block(struct r5l_log *log, sector_t pos, mb->checksum = cpu_to_le32(crc32c_le(log->uuid_checksum, mb, PAGE_SIZE)); if (!sync_page_io(log->rdev, pos, PAGE_SIZE, page, REQ_OP_WRITE, - REQ_FUA, false)) { + REQ_SYNC | REQ_FUA, false)) { __free_page(page); return -EIO; } @@ -2388,7 +2388,7 @@ r5c_recovery_rewrite_data_only_stripes(struct r5l_log *log, mb->checksum = cpu_to_le32(crc32c_le(log->uuid_checksum, mb, PAGE_SIZE)); sync_page_io(log->rdev, ctx->pos, PAGE_SIZE, page, - REQ_OP_WRITE, REQ_FUA, false); + REQ_OP_WRITE, REQ_SYNC | REQ_FUA, false); sh->log_start = ctx->pos; list_add_tail(&sh->r5c, &log->stripe_in_journal_list); atomic_inc(&log->stripe_in_journal_count); diff --git a/drivers/md/raid5-ppl.c b/drivers/md/raid5-ppl.c index 5d25bebf3328..ccce92e68d7f 100644 --- a/drivers/md/raid5-ppl.c +++ b/drivers/md/raid5-ppl.c @@ -907,8 +907,8 @@ static int ppl_write_empty_header(struct ppl_log *log) pplhdr->checksum = cpu_to_le32(~crc32c_le(~0, pplhdr, PAGE_SIZE)); if (!sync_page_io(rdev, rdev->ppl.sector - rdev->data_offset, - PPL_HEADER_SIZE, page, REQ_OP_WRITE | REQ_FUA, 0, - false)) { + PPL_HEADER_SIZE, page, REQ_OP_WRITE | REQ_SYNC | + REQ_FUA, 0, false)) { md_error(rdev->mddev, rdev); ret = -EIO; } From 6ea44adce91526700535b3150f77f8639ae8c82d Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 25 May 2017 17:00:32 +1000 Subject: [PATCH 0283/1065] SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() If you attempt a TCP mount from an host that is unreachable in a way that triggers an immediate error from kernel_connect(), that error does not propagate up, instead EAGAIN is reported. This results in call_connect_status receiving the wrong error. A case that it easy to demonstrate is to attempt to mount from an address that results in ENETUNREACH, but first deleting any default route. Without this patch, the mount.nfs process is persistently runnable and is hard to kill. With this patch it exits as it should. The problem is caused by the fact that xs_tcp_force_close() eventually calls xprt_wake_pending_tasks(xprt, -EAGAIN); which causes an error return of -EAGAIN. so when xs_tcp_setup_sock() calls xprt_wake_pending_tasks(xprt, status); the status is ignored. Fixes: 4efdd92c9211 ("SUNRPC: Remove TCP client connection reset hack") Signed-off-by: NeilBrown Signed-off-by: Trond Myklebust --- net/sunrpc/xprtsock.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 16aff8ddc16f..d5b54c020dec 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -2432,7 +2432,12 @@ static void xs_tcp_setup_socket(struct work_struct *work) case -ENETUNREACH: case -EADDRINUSE: case -ENOBUFS: - /* retry with existing socket, after a delay */ + /* + * xs_tcp_force_close() wakes tasks with -EIO. + * We need to wake them first to ensure the + * correct error code. + */ + xprt_wake_pending_tasks(xprt, status); xs_tcp_force_close(xprt); goto out; } From 15e5651525c2e580a523568ed207e4a3fb11cc33 Mon Sep 17 00:00:00 2001 From: Douglas Caetano dos Santos Date: Fri, 26 May 2017 14:28:00 -0300 Subject: [PATCH 0284/1065] tcp: reinitialize MTU probing when setting MSS in a TCP repair MTU probing initialization occurred only at connect() and at SYN or SYN-ACK reception, but the former sets MSS to either the default or the user set value (through TCP_MAXSEG sockopt) and the latter never happens with repaired sockets. The result was that, with MTU probing enabled and unless TCP_MAXSEG sockopt was used before connect(), probing would be stuck at tcp_base_mss value until tcp_probe_interval seconds have passed. Signed-off-by: Douglas Caetano dos Santos Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 59792d283ff8..b5ea036ca781 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2381,9 +2381,10 @@ static int tcp_repair_set_window(struct tcp_sock *tp, char __user *optbuf, int l return 0; } -static int tcp_repair_options_est(struct tcp_sock *tp, +static int tcp_repair_options_est(struct sock *sk, struct tcp_repair_opt __user *optbuf, unsigned int len) { + struct tcp_sock *tp = tcp_sk(sk); struct tcp_repair_opt opt; while (len >= sizeof(opt)) { @@ -2396,6 +2397,7 @@ static int tcp_repair_options_est(struct tcp_sock *tp, switch (opt.opt_code) { case TCPOPT_MSS: tp->rx_opt.mss_clamp = opt.opt_val; + tcp_mtup_init(sk); break; case TCPOPT_WINDOW: { @@ -2555,7 +2557,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level, if (!tp->repair) err = -EINVAL; else if (sk->sk_state == TCP_ESTABLISHED) - err = tcp_repair_options_est(tp, + err = tcp_repair_options_est(sk, (struct tcp_repair_opt __user *)optval, optlen); else From 45cc6586b7a73e84a8806881122b6ec306cdc9e7 Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Mon, 29 May 2017 13:13:59 -0400 Subject: [PATCH 0285/1065] drm/amdgpu: Program ring for vce instance 1 at its register space We need program ring buffer on instance 1 register space domain, when only if instance 1 available, with two instances or instance 0, and we need only program instance 0 regsiter space domain for ring. Signed-off-by: Leo Liu Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 95 +++++++++++++++++++-------- 1 file changed, 68 insertions(+), 27 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index fb0819359909..90332f55cfba 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -77,13 +77,26 @@ static int vce_v3_0_set_clockgating_state(void *handle, static uint64_t vce_v3_0_ring_get_rptr(struct amdgpu_ring *ring) { struct amdgpu_device *adev = ring->adev; + u32 v; + + mutex_lock(&adev->grbm_idx_mutex); + if (adev->vce.harvest_config == 0 || + adev->vce.harvest_config == AMDGPU_VCE_HARVEST_VCE1) + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(0)); + else if (adev->vce.harvest_config == AMDGPU_VCE_HARVEST_VCE0) + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(1)); if (ring == &adev->vce.ring[0]) - return RREG32(mmVCE_RB_RPTR); + v = RREG32(mmVCE_RB_RPTR); else if (ring == &adev->vce.ring[1]) - return RREG32(mmVCE_RB_RPTR2); + v = RREG32(mmVCE_RB_RPTR2); else - return RREG32(mmVCE_RB_RPTR3); + v = RREG32(mmVCE_RB_RPTR3); + + WREG32(mmGRBM_GFX_INDEX, mmGRBM_GFX_INDEX_DEFAULT); + mutex_unlock(&adev->grbm_idx_mutex); + + return v; } /** @@ -96,13 +109,26 @@ static uint64_t vce_v3_0_ring_get_rptr(struct amdgpu_ring *ring) static uint64_t vce_v3_0_ring_get_wptr(struct amdgpu_ring *ring) { struct amdgpu_device *adev = ring->adev; + u32 v; + + mutex_lock(&adev->grbm_idx_mutex); + if (adev->vce.harvest_config == 0 || + adev->vce.harvest_config == AMDGPU_VCE_HARVEST_VCE1) + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(0)); + else if (adev->vce.harvest_config == AMDGPU_VCE_HARVEST_VCE0) + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(1)); if (ring == &adev->vce.ring[0]) - return RREG32(mmVCE_RB_WPTR); + v = RREG32(mmVCE_RB_WPTR); else if (ring == &adev->vce.ring[1]) - return RREG32(mmVCE_RB_WPTR2); + v = RREG32(mmVCE_RB_WPTR2); else - return RREG32(mmVCE_RB_WPTR3); + v = RREG32(mmVCE_RB_WPTR3); + + WREG32(mmGRBM_GFX_INDEX, mmGRBM_GFX_INDEX_DEFAULT); + mutex_unlock(&adev->grbm_idx_mutex); + + return v; } /** @@ -116,12 +142,22 @@ static void vce_v3_0_ring_set_wptr(struct amdgpu_ring *ring) { struct amdgpu_device *adev = ring->adev; + mutex_lock(&adev->grbm_idx_mutex); + if (adev->vce.harvest_config == 0 || + adev->vce.harvest_config == AMDGPU_VCE_HARVEST_VCE1) + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(0)); + else if (adev->vce.harvest_config == AMDGPU_VCE_HARVEST_VCE0) + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(1)); + if (ring == &adev->vce.ring[0]) WREG32(mmVCE_RB_WPTR, lower_32_bits(ring->wptr)); else if (ring == &adev->vce.ring[1]) WREG32(mmVCE_RB_WPTR2, lower_32_bits(ring->wptr)); else WREG32(mmVCE_RB_WPTR3, lower_32_bits(ring->wptr)); + + WREG32(mmGRBM_GFX_INDEX, mmGRBM_GFX_INDEX_DEFAULT); + mutex_unlock(&adev->grbm_idx_mutex); } static void vce_v3_0_override_vce_clock_gating(struct amdgpu_device *adev, bool override) @@ -231,33 +267,38 @@ static int vce_v3_0_start(struct amdgpu_device *adev) struct amdgpu_ring *ring; int idx, r; - ring = &adev->vce.ring[0]; - WREG32(mmVCE_RB_RPTR, lower_32_bits(ring->wptr)); - WREG32(mmVCE_RB_WPTR, lower_32_bits(ring->wptr)); - WREG32(mmVCE_RB_BASE_LO, ring->gpu_addr); - WREG32(mmVCE_RB_BASE_HI, upper_32_bits(ring->gpu_addr)); - WREG32(mmVCE_RB_SIZE, ring->ring_size / 4); - - ring = &adev->vce.ring[1]; - WREG32(mmVCE_RB_RPTR2, lower_32_bits(ring->wptr)); - WREG32(mmVCE_RB_WPTR2, lower_32_bits(ring->wptr)); - WREG32(mmVCE_RB_BASE_LO2, ring->gpu_addr); - WREG32(mmVCE_RB_BASE_HI2, upper_32_bits(ring->gpu_addr)); - WREG32(mmVCE_RB_SIZE2, ring->ring_size / 4); - - ring = &adev->vce.ring[2]; - WREG32(mmVCE_RB_RPTR3, lower_32_bits(ring->wptr)); - WREG32(mmVCE_RB_WPTR3, lower_32_bits(ring->wptr)); - WREG32(mmVCE_RB_BASE_LO3, ring->gpu_addr); - WREG32(mmVCE_RB_BASE_HI3, upper_32_bits(ring->gpu_addr)); - WREG32(mmVCE_RB_SIZE3, ring->ring_size / 4); - mutex_lock(&adev->grbm_idx_mutex); for (idx = 0; idx < 2; ++idx) { if (adev->vce.harvest_config & (1 << idx)) continue; WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(idx)); + + /* Program instance 0 reg space for two instances or instance 0 case + program instance 1 reg space for only instance 1 available case */ + if (idx != 1 || adev->vce.harvest_config == AMDGPU_VCE_HARVEST_VCE0) { + ring = &adev->vce.ring[0]; + WREG32(mmVCE_RB_RPTR, lower_32_bits(ring->wptr)); + WREG32(mmVCE_RB_WPTR, lower_32_bits(ring->wptr)); + WREG32(mmVCE_RB_BASE_LO, ring->gpu_addr); + WREG32(mmVCE_RB_BASE_HI, upper_32_bits(ring->gpu_addr)); + WREG32(mmVCE_RB_SIZE, ring->ring_size / 4); + + ring = &adev->vce.ring[1]; + WREG32(mmVCE_RB_RPTR2, lower_32_bits(ring->wptr)); + WREG32(mmVCE_RB_WPTR2, lower_32_bits(ring->wptr)); + WREG32(mmVCE_RB_BASE_LO2, ring->gpu_addr); + WREG32(mmVCE_RB_BASE_HI2, upper_32_bits(ring->gpu_addr)); + WREG32(mmVCE_RB_SIZE2, ring->ring_size / 4); + + ring = &adev->vce.ring[2]; + WREG32(mmVCE_RB_RPTR3, lower_32_bits(ring->wptr)); + WREG32(mmVCE_RB_WPTR3, lower_32_bits(ring->wptr)); + WREG32(mmVCE_RB_BASE_LO3, ring->gpu_addr); + WREG32(mmVCE_RB_BASE_HI3, upper_32_bits(ring->gpu_addr)); + WREG32(mmVCE_RB_SIZE3, ring->ring_size / 4); + } + vce_v3_0_mc_resume(adev, idx); WREG32_FIELD(VCE_STATUS, JOB_BUSY, 1); From 898805e0cdf7fd860ec21bf661d3a0285a3defbd Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 30 May 2017 16:21:51 +0100 Subject: [PATCH 0286/1065] net: phy: fix marvell phy status reading The Marvell driver incorrectly provides phydev->lp_advertising as the logical and of the link partner's advert and our advert. This is incorrect - this field is supposed to store the link parter's unmodified advertisment. This allows ethtool to report the correct link partner auto-negotiation status. Fixes: be937f1f89ca ("Marvell PHY m88e1111 driver fix") Signed-off-by: Russell King Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 9097e42bec2e..57297ba23987 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -1127,8 +1127,6 @@ static int marvell_read_status_page(struct phy_device *phydev, int page) if (adv < 0) return adv; - lpa &= adv; - if (status & MII_M1011_PHY_STATUS_FULLDUPLEX) phydev->duplex = DUPLEX_FULL; else From 1ba15b24f07c44f68067959522639226c963e212 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 31 May 2017 10:18:55 +0200 Subject: [PATCH 0287/1065] KVM: s390: fix ais handling vs cpu model If ais is disabled via cpumodel, we must act accordingly, even if KVM_CAP_S390_AIS was enabled. Signed-off-by: Christian Borntraeger Reviewed-by: Pierre Morel Reviewed-by: Yi Min Zhao Reviewed-by: Halil Pasic Reviewed-by: Eric Farman --- arch/s390/include/asm/kvm_host.h | 1 - arch/s390/kvm/interrupt.c | 4 ++-- arch/s390/kvm/kvm-s390.c | 2 -- 3 files changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 426614a882a9..65d07ac34647 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -541,7 +541,6 @@ struct kvm_s390_float_interrupt { struct mutex ais_lock; u8 simm; u8 nimm; - int ais_enabled; }; struct kvm_hw_wp_info_arch { diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index caf15c8a8948..2d120fef7d90 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -2160,7 +2160,7 @@ static int modify_ais_mode(struct kvm *kvm, struct kvm_device_attr *attr) struct kvm_s390_ais_req req; int ret = 0; - if (!fi->ais_enabled) + if (!test_kvm_facility(kvm, 72)) return -ENOTSUPP; if (copy_from_user(&req, (void __user *)attr->addr, sizeof(req))) @@ -2204,7 +2204,7 @@ static int kvm_s390_inject_airq(struct kvm *kvm, }; int ret = 0; - if (!fi->ais_enabled || !adapter->suppressible) + if (!test_kvm_facility(kvm, 72) || !adapter->suppressible) return kvm_s390_inject_vm(kvm, &s390int); mutex_lock(&fi->ais_lock); diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 689ac48361c6..f28e2e776931 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -558,7 +558,6 @@ static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap) } else { set_kvm_facility(kvm->arch.model.fac_mask, 72); set_kvm_facility(kvm->arch.model.fac_list, 72); - kvm->arch.float_int.ais_enabled = 1; r = 0; } mutex_unlock(&kvm->lock); @@ -1533,7 +1532,6 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) mutex_init(&kvm->arch.float_int.ais_lock); kvm->arch.float_int.simm = 0; kvm->arch.float_int.nimm = 0; - kvm->arch.float_int.ais_enabled = 0; spin_lock_init(&kvm->arch.float_int.lock); for (i = 0; i < FIRQ_LIST_COUNT; i++) INIT_LIST_HEAD(&kvm->arch.float_int.lists[i]); From 1b8f8694bb4992135dac150bf44a6c139e573970 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 30 May 2017 21:38:18 +0100 Subject: [PATCH 0288/1065] net: fix auto-loading of Marvell DSA driver Auto-loading of the Marvell DSA driver has stopped working with recent kernels. This seems to be due to the change of binding for DSA devices, moving them from the platform bus to the MDIO bus. In order for module auto-loading to work, we need to provide a MODALIAS string in the uevent file for the device. However, the device core does not automatically provide this, and needs each bus_type to implement a uevent method to generate these strings. The MDIO bus does not provide such a method, so no MODALIAS string is provided: .# cat /sys/bus/mdio_bus/devices/f1072004.mdio-mii\:04/uevent DRIVER=mv88e6085 OF_NAME=switch OF_FULLNAME=/soc/internal-regs/mdio@72004/switch@4 OF_COMPATIBLE_0=marvell,mv88e6085 OF_COMPATIBLE_N=1 In the case of OF-based devices, the solution is easy - of_device_uevent_modalias() does the work for us. After this is done, the uevent file looks like this: .# cat /sys/bus/mdio_bus/devices/f1072004.mdio-mii\:04/uevent DRIVER=mv88e6085 OF_NAME=switch OF_FULLNAME=/soc/internal-regs/mdio@72004/switch@4 OF_COMPATIBLE_0=marvell,mv88e6085 OF_COMPATIBLE_N=1 MODALIAS=of:NswitchTCmarvell,mv88e6085 which results in auto-loading of the Marvell DSA driver on Clearfog platforms. Fixes: c0405563a613 ("ARM: dts: armada-388-clearfog: Utilize new DSA binding") Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 8e73f5f36e71..f99c21f78b63 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -658,6 +658,18 @@ static int mdio_bus_match(struct device *dev, struct device_driver *drv) return 0; } +static int mdio_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + int rc; + + /* Some devices have extra OF data and an OF-style MODALIAS */ + rc = of_device_uevent_modalias(dev, env); + if (rc != -ENODEV) + return rc; + + return 0; +} + #ifdef CONFIG_PM static int mdio_bus_suspend(struct device *dev) { @@ -708,6 +720,7 @@ static const struct dev_pm_ops mdio_bus_pm_ops = { struct bus_type mdio_bus_type = { .name = "mdio_bus", .match = mdio_bus_match, + .uevent = mdio_uevent, .pm = MDIO_BUS_PM_OPS, }; EXPORT_SYMBOL(mdio_bus_type); From 06d2d6431bc8d41ef5ffd8bd4b52cea9f72aed22 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 30 May 2017 17:38:43 -0500 Subject: [PATCH 0289/1065] net: freescale: fix potential null pointer dereference Add NULL check before dereferencing pointer _id_ in order to avoid a potential NULL pointer dereference. Addresses-Coverity-ID: 1397995 Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fsl_pq_mdio.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 446c7b374ff5..a10de1e9c157 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -381,7 +381,7 @@ static int fsl_pq_mdio_probe(struct platform_device *pdev) { const struct of_device_id *id = of_match_device(fsl_pq_mdio_match, &pdev->dev); - const struct fsl_pq_mdio_data *data = id->data; + const struct fsl_pq_mdio_data *data; struct device_node *np = pdev->dev.of_node; struct resource res; struct device_node *tbi; @@ -389,6 +389,13 @@ static int fsl_pq_mdio_probe(struct platform_device *pdev) struct mii_bus *new_bus; int err; + if (!id) { + dev_err(&pdev->dev, "Failed to match device\n"); + return -ENODEV; + } + + data = id->data; + dev_dbg(&pdev->dev, "found %s compatible node\n", id->compatible); new_bus = mdiobus_alloc_size(sizeof(*priv)); From f7cf69ae171592d133c69b9adaa5de7cfb6038ea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2017 14:26:26 -0400 Subject: [PATCH 0290/1065] libata: fix error checking in in ata_parse_force_one() ata_parse_force_one() was incorrectly comparing @p to @endp when it should have been comparing @id. The only consequence is that it may end up using an invalid port number in "libata.force" module param instead of rejecting it. Signed-off-by: Tejun Heo Reported-by: Petru-Florin Mihancea Link: https://bugzilla.kernel.org/show_bug.cgi?id=195785 --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2d83b8c75965..e157a0e44419 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6800,7 +6800,7 @@ static int __init ata_parse_force_one(char **cur, } force_ent->port = simple_strtoul(id, &endp, 10); - if (p == endp || *endp != '\0') { + if (id == endp || *endp != '\0') { *reason = "invalid port/link"; return -EINVAL; } From e8f4ae85439f34bec3b0ab69223a41809dab28c9 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Wed, 31 May 2017 09:40:11 +0800 Subject: [PATCH 0291/1065] isdn: Fix a sleep-in-atomic bug The driver may sleep under a spin lock, the function call path is: isdn_ppp_mp_receive (acquire the lock) isdn_ppp_mp_reassembly isdn_ppp_push_higher isdn_ppp_decompress isdn_ppp_ccp_reset_trans isdn_ppp_ccp_reset_alloc_state kzalloc(GFP_KERNEL) --> may sleep To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_ppp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index d07dd5196ffc..8aa158a09180 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -2364,7 +2364,7 @@ static struct ippp_ccp_reset_state *isdn_ppp_ccp_reset_alloc_state(struct ippp_s id); return NULL; } else { - rs = kzalloc(sizeof(struct ippp_ccp_reset_state), GFP_KERNEL); + rs = kzalloc(sizeof(struct ippp_ccp_reset_state), GFP_ATOMIC); if (!rs) return NULL; rs->state = CCPResetIdle; From c2e8471d98f072f0f18acdd7df5b401ed0d29a2c Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Tue, 30 May 2017 23:50:36 -0700 Subject: [PATCH 0292/1065] mpls: fix clearing of dead nh_flags on link up recent fixes to use WRITE_ONCE for nh_flags on link up, accidently ended up leaving the deadflags on a nh. This patch fixes the WRITE_ONCE to use freshly evaluated nh_flags. Fixes: 39eb8cd17588 ("net: mpls: rt_nhn_alive and nh_flags should be accessed using READ_ONCE") Reported-by: Satish Ashok Signed-off-by: Roopa Prabhu Acked-by: David Ahern Signed-off-by: David S. Miller --- net/mpls/af_mpls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c index 257ec66009da..7b05fd1497ce 100644 --- a/net/mpls/af_mpls.c +++ b/net/mpls/af_mpls.c @@ -1418,7 +1418,7 @@ static void mpls_ifup(struct net_device *dev, unsigned int flags) continue; alive++; nh_flags &= ~flags; - WRITE_ONCE(nh->nh_flags, flags); + WRITE_ONCE(nh->nh_flags, nh_flags); } endfor_nexthops(rt); WRITE_ONCE(rt->rt_nhn_alive, alive); From a91afc974ee8441940241e3c39c75d7b8f38e911 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 31 May 2017 15:58:19 +0800 Subject: [PATCH 0293/1065] dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks The AR100 clock in the PRCM has parents, one of which is pll-periph from the main CCU. Add it to the list of required clocks for the PRCM CCU. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index e9c5a1d9834a..f465647a4dd2 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -22,7 +22,8 @@ Required properties : - #clock-cells : must contain 1 - #reset-cells : must contain 1 -For the PRCM CCUs on H3/A64, one more clock is needed: +For the PRCM CCUs on H3/A64, two more clocks are needed: +- "pll-periph": the SoC's peripheral PLL from the main CCU - "iosc": the SoC's internal frequency oscillator Example for generic CCU: @@ -39,8 +40,8 @@ Example for PRCM CCU: r_ccu: clock@01f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>; - clock-names = "hosc", "losc", "iosc"; + clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; From c4be8c68e6900b1811bc64f74cb13d5032a389ce Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 31 May 2017 15:58:21 +0800 Subject: [PATCH 0294/1065] clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM The PRCM takes PLL_PERIPH0 as one of its parents for the AR100 clock. As such we need to be able to describe this relationship in the device tree. Export the PLL_PERIPH0 clock so we can reference it in the PRCM node. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu-sun8i-h3.h | 4 +++- include/dt-bindings/clock/sun8i-h3-ccu.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h b/drivers/clk/sunxi-ng/ccu-sun8i-h3.h index 85973d1e8165..1b4baea37d81 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.h @@ -29,7 +29,9 @@ #define CLK_PLL_VIDEO 6 #define CLK_PLL_VE 7 #define CLK_PLL_DDR 8 -#define CLK_PLL_PERIPH0 9 + +/* PLL_PERIPH0 exported for PRCM */ + #define CLK_PLL_PERIPH0_2X 10 #define CLK_PLL_GPU 11 #define CLK_PLL_PERIPH1 12 diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h index c2afc41d6964..e139fe5c62ec 100644 --- a/include/dt-bindings/clock/sun8i-h3-ccu.h +++ b/include/dt-bindings/clock/sun8i-h3-ccu.h @@ -43,6 +43,8 @@ #ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_ #define _DT_BINDINGS_CLK_SUN8I_H3_H_ +#define CLK_PLL_PERIPH0 9 + #define CLK_CPUX 14 #define CLK_BUS_CE 20 From d85da227c3ae43d9ca513d60f244213cb4e55485 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 31 May 2017 15:58:23 +0800 Subject: [PATCH 0295/1065] clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM The PRCM takes PLL_PERIPH0 as one of its parents for the AR100 clock. As such we need to be able to describe this relationship in the device tree. Export the PLL_PERIPH0 clock so we can reference it in the PRCM node. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 4 +++- include/dt-bindings/clock/sun50i-a64-ccu.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h index 9b3cd24b78d2..061b6fbb4f95 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h @@ -31,7 +31,9 @@ #define CLK_PLL_VIDEO0_2X 8 #define CLK_PLL_VE 9 #define CLK_PLL_DDR0 10 -#define CLK_PLL_PERIPH0 11 + +/* PLL_PERIPH0 exported for PRCM */ + #define CLK_PLL_PERIPH0_2X 12 #define CLK_PLL_PERIPH1 13 #define CLK_PLL_PERIPH1_2X 14 diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h index 370c0a0473fc..d66432c6e675 100644 --- a/include/dt-bindings/clock/sun50i-a64-ccu.h +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -43,6 +43,8 @@ #ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ #define _DT_BINDINGS_CLK_SUN50I_A64_H_ +#define CLK_PLL_PERIPH0 11 + #define CLK_BUS_MIPI_DSI 28 #define CLK_BUS_CE 29 #define CLK_BUS_DMA 30 From 25cdda95fda78d22d44157da15aa7ea34be3c804 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 24 May 2017 21:47:09 -0700 Subject: [PATCH 0296/1065] iscsi-target: Fix initial login PDU asynchronous socket close OOPs This patch fixes a OOPs originally introduced by: commit bb048357dad6d604520c91586334c9c230366a14 Author: Nicholas Bellinger Date: Thu Sep 5 14:54:04 2013 -0700 iscsi-target: Add sk->sk_state_change to cleanup after TCP failure which would trigger a NULL pointer dereference when a TCP connection was closed asynchronously via iscsi_target_sk_state_change(), but only when the initial PDU processing in iscsi_target_do_login() from iscsi_np process context was blocked waiting for backend I/O to complete. To address this issue, this patch makes the following changes. First, it introduces some common helper functions used for checking socket closing state, checking login_flags, and atomically checking socket closing state + setting login_flags. Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP connection has dropped via iscsi_target_sk_state_change(), but the initial PDU processing within iscsi_target_do_login() in iscsi_np context is still running. For this case, it sets LOGIN_FLAGS_CLOSED, but doesn't invoke schedule_delayed_work(). The original NULL pointer dereference case reported by MNC is now handled by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before transitioning to FFP to determine when the socket has already closed, or iscsi_target_start_negotiation() if the login needs to exchange more PDUs (eg: iscsi_target_do_login returned 0) but the socket has closed. For both of these cases, the cleanup up of remaining connection resources will occur in iscsi_target_start_negotiation() from iscsi_np process context once the failure is detected. Finally, to handle to case where iscsi_target_sk_state_change() is called after the initial PDU procesing is complete, it now invokes conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once existing iscsi_target_sk_check_close() checks detect connection failure. For this case, the cleanup of remaining connection resources will occur in iscsi_target_do_login_rx() from delayed workqueue process context once the failure is detected. Reported-by: Mike Christie Reviewed-by: Mike Christie Tested-by: Mike Christie Cc: Mike Christie Reported-by: Hannes Reinecke Cc: Hannes Reinecke Cc: Sagi Grimberg Cc: Varun Prakash Cc: # v3.12+ Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_nego.c | 196 +++++++++++++++-------- include/target/iscsi/iscsi_target_core.h | 1 + 2 files changed, 134 insertions(+), 63 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c index 7ccc9c1cbfd1..6f88b31242b0 100644 --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -493,14 +493,60 @@ static void iscsi_target_restore_sock_callbacks(struct iscsi_conn *conn) static int iscsi_target_do_login(struct iscsi_conn *, struct iscsi_login *); -static bool iscsi_target_sk_state_check(struct sock *sk) +static bool __iscsi_target_sk_check_close(struct sock *sk) { if (sk->sk_state == TCP_CLOSE_WAIT || sk->sk_state == TCP_CLOSE) { - pr_debug("iscsi_target_sk_state_check: TCP_CLOSE_WAIT|TCP_CLOSE," + pr_debug("__iscsi_target_sk_check_close: TCP_CLOSE_WAIT|TCP_CLOSE," "returning FALSE\n"); - return false; + return true; } - return true; + return false; +} + +static bool iscsi_target_sk_check_close(struct iscsi_conn *conn) +{ + bool state = false; + + if (conn->sock) { + struct sock *sk = conn->sock->sk; + + read_lock_bh(&sk->sk_callback_lock); + state = (__iscsi_target_sk_check_close(sk) || + test_bit(LOGIN_FLAGS_CLOSED, &conn->login_flags)); + read_unlock_bh(&sk->sk_callback_lock); + } + return state; +} + +static bool iscsi_target_sk_check_flag(struct iscsi_conn *conn, unsigned int flag) +{ + bool state = false; + + if (conn->sock) { + struct sock *sk = conn->sock->sk; + + read_lock_bh(&sk->sk_callback_lock); + state = test_bit(flag, &conn->login_flags); + read_unlock_bh(&sk->sk_callback_lock); + } + return state; +} + +static bool iscsi_target_sk_check_and_clear(struct iscsi_conn *conn, unsigned int flag) +{ + bool state = false; + + if (conn->sock) { + struct sock *sk = conn->sock->sk; + + write_lock_bh(&sk->sk_callback_lock); + state = (__iscsi_target_sk_check_close(sk) || + test_bit(LOGIN_FLAGS_CLOSED, &conn->login_flags)); + if (!state) + clear_bit(flag, &conn->login_flags); + write_unlock_bh(&sk->sk_callback_lock); + } + return state; } static void iscsi_target_login_drop(struct iscsi_conn *conn, struct iscsi_login *login) @@ -540,6 +586,20 @@ static void iscsi_target_do_login_rx(struct work_struct *work) pr_debug("entering iscsi_target_do_login_rx, conn: %p, %s:%d\n", conn, current->comm, current->pid); + /* + * If iscsi_target_do_login_rx() has been invoked by ->sk_data_ready() + * before initial PDU processing in iscsi_target_start_negotiation() + * has completed, go ahead and retry until it's cleared. + * + * Otherwise if the TCP connection drops while this is occuring, + * iscsi_target_start_negotiation() will detect the failure, call + * cancel_delayed_work_sync(&conn->login_work), and cleanup the + * remaining iscsi connection resources from iscsi_np process context. + */ + if (iscsi_target_sk_check_flag(conn, LOGIN_FLAGS_INITIAL_PDU)) { + schedule_delayed_work(&conn->login_work, msecs_to_jiffies(10)); + return; + } spin_lock(&tpg->tpg_state_lock); state = (tpg->tpg_state == TPG_STATE_ACTIVE); @@ -547,26 +607,12 @@ static void iscsi_target_do_login_rx(struct work_struct *work) if (!state) { pr_debug("iscsi_target_do_login_rx: tpg_state != TPG_STATE_ACTIVE\n"); - iscsi_target_restore_sock_callbacks(conn); - iscsi_target_login_drop(conn, login); - iscsit_deaccess_np(np, tpg, tpg_np); - return; + goto err; } - if (conn->sock) { - struct sock *sk = conn->sock->sk; - - read_lock_bh(&sk->sk_callback_lock); - state = iscsi_target_sk_state_check(sk); - read_unlock_bh(&sk->sk_callback_lock); - - if (!state) { - pr_debug("iscsi_target_do_login_rx, TCP state CLOSE\n"); - iscsi_target_restore_sock_callbacks(conn); - iscsi_target_login_drop(conn, login); - iscsit_deaccess_np(np, tpg, tpg_np); - return; - } + if (iscsi_target_sk_check_close(conn)) { + pr_debug("iscsi_target_do_login_rx, TCP state CLOSE\n"); + goto err; } conn->login_kworker = current; @@ -584,34 +630,29 @@ static void iscsi_target_do_login_rx(struct work_struct *work) flush_signals(current); conn->login_kworker = NULL; - if (rc < 0) { - iscsi_target_restore_sock_callbacks(conn); - iscsi_target_login_drop(conn, login); - iscsit_deaccess_np(np, tpg, tpg_np); - return; - } + if (rc < 0) + goto err; pr_debug("iscsi_target_do_login_rx after rx_login_io, %p, %s:%d\n", conn, current->comm, current->pid); rc = iscsi_target_do_login(conn, login); if (rc < 0) { - iscsi_target_restore_sock_callbacks(conn); - iscsi_target_login_drop(conn, login); - iscsit_deaccess_np(np, tpg, tpg_np); + goto err; } else if (!rc) { - if (conn->sock) { - struct sock *sk = conn->sock->sk; - - write_lock_bh(&sk->sk_callback_lock); - clear_bit(LOGIN_FLAGS_READ_ACTIVE, &conn->login_flags); - write_unlock_bh(&sk->sk_callback_lock); - } + if (iscsi_target_sk_check_and_clear(conn, LOGIN_FLAGS_READ_ACTIVE)) + goto err; } else if (rc == 1) { iscsi_target_nego_release(conn); iscsi_post_login_handler(np, conn, zero_tsih); iscsit_deaccess_np(np, tpg, tpg_np); } + return; + +err: + iscsi_target_restore_sock_callbacks(conn); + iscsi_target_login_drop(conn, login); + iscsit_deaccess_np(np, tpg, tpg_np); } static void iscsi_target_do_cleanup(struct work_struct *work) @@ -659,31 +700,54 @@ static void iscsi_target_sk_state_change(struct sock *sk) orig_state_change(sk); return; } + state = __iscsi_target_sk_check_close(sk); + pr_debug("__iscsi_target_sk_close_change: state: %d\n", state); + if (test_bit(LOGIN_FLAGS_READ_ACTIVE, &conn->login_flags)) { pr_debug("Got LOGIN_FLAGS_READ_ACTIVE=1 sk_state_change" " conn: %p\n", conn); + if (state) + set_bit(LOGIN_FLAGS_CLOSED, &conn->login_flags); write_unlock_bh(&sk->sk_callback_lock); orig_state_change(sk); return; } - if (test_and_set_bit(LOGIN_FLAGS_CLOSED, &conn->login_flags)) { + if (test_bit(LOGIN_FLAGS_CLOSED, &conn->login_flags)) { pr_debug("Got LOGIN_FLAGS_CLOSED=1 sk_state_change conn: %p\n", conn); write_unlock_bh(&sk->sk_callback_lock); orig_state_change(sk); return; } - - state = iscsi_target_sk_state_check(sk); - write_unlock_bh(&sk->sk_callback_lock); - - pr_debug("iscsi_target_sk_state_change: state: %d\n", state); - - if (!state) { + /* + * If the TCP connection has dropped, go ahead and set LOGIN_FLAGS_CLOSED, + * but only queue conn->login_work -> iscsi_target_do_login_rx() + * processing if LOGIN_FLAGS_INITIAL_PDU has already been cleared. + * + * When iscsi_target_do_login_rx() runs, iscsi_target_sk_check_close() + * will detect the dropped TCP connection from delayed workqueue context. + * + * If LOGIN_FLAGS_INITIAL_PDU is still set, which means the initial + * iscsi_target_start_negotiation() is running, iscsi_target_do_login() + * via iscsi_target_sk_check_close() or iscsi_target_start_negotiation() + * via iscsi_target_sk_check_and_clear() is responsible for detecting the + * dropped TCP connection in iscsi_np process context, and cleaning up + * the remaining iscsi connection resources. + */ + if (state) { pr_debug("iscsi_target_sk_state_change got failed state\n"); - schedule_delayed_work(&conn->login_cleanup_work, 0); + set_bit(LOGIN_FLAGS_CLOSED, &conn->login_flags); + state = test_bit(LOGIN_FLAGS_INITIAL_PDU, &conn->login_flags); + write_unlock_bh(&sk->sk_callback_lock); + + orig_state_change(sk); + + if (!state) + schedule_delayed_work(&conn->login_work, 0); return; } + write_unlock_bh(&sk->sk_callback_lock); + orig_state_change(sk); } @@ -946,6 +1010,15 @@ static int iscsi_target_do_login(struct iscsi_conn *conn, struct iscsi_login *lo if (iscsi_target_handle_csg_one(conn, login) < 0) return -1; if (login_rsp->flags & ISCSI_FLAG_LOGIN_TRANSIT) { + /* + * Check to make sure the TCP connection has not + * dropped asynchronously while session reinstatement + * was occuring in this kthread context, before + * transitioning to full feature phase operation. + */ + if (iscsi_target_sk_check_close(conn)) + return -1; + login->tsih = conn->sess->tsih; login->login_complete = 1; iscsi_target_restore_sock_callbacks(conn); @@ -972,21 +1045,6 @@ static int iscsi_target_do_login(struct iscsi_conn *conn, struct iscsi_login *lo break; } - if (conn->sock) { - struct sock *sk = conn->sock->sk; - bool state; - - read_lock_bh(&sk->sk_callback_lock); - state = iscsi_target_sk_state_check(sk); - read_unlock_bh(&sk->sk_callback_lock); - - if (!state) { - pr_debug("iscsi_target_do_login() failed state for" - " conn: %p\n", conn); - return -1; - } - } - return 0; } @@ -1255,10 +1313,22 @@ int iscsi_target_start_negotiation( write_lock_bh(&sk->sk_callback_lock); set_bit(LOGIN_FLAGS_READY, &conn->login_flags); + set_bit(LOGIN_FLAGS_INITIAL_PDU, &conn->login_flags); write_unlock_bh(&sk->sk_callback_lock); } - + /* + * If iscsi_target_do_login returns zero to signal more PDU + * exchanges are required to complete the login, go ahead and + * clear LOGIN_FLAGS_INITIAL_PDU but only if the TCP connection + * is still active. + * + * Otherwise if TCP connection dropped asynchronously, go ahead + * and perform connection cleanup now. + */ ret = iscsi_target_do_login(conn, login); + if (!ret && iscsi_target_sk_check_and_clear(conn, LOGIN_FLAGS_INITIAL_PDU)) + ret = -1; + if (ret < 0) { cancel_delayed_work_sync(&conn->login_work); cancel_delayed_work_sync(&conn->login_cleanup_work); diff --git a/include/target/iscsi/iscsi_target_core.h b/include/target/iscsi/iscsi_target_core.h index 275581d483dd..5f17fb770477 100644 --- a/include/target/iscsi/iscsi_target_core.h +++ b/include/target/iscsi/iscsi_target_core.h @@ -557,6 +557,7 @@ struct iscsi_conn { #define LOGIN_FLAGS_READ_ACTIVE 1 #define LOGIN_FLAGS_CLOSED 2 #define LOGIN_FLAGS_READY 4 +#define LOGIN_FLAGS_INITIAL_PDU 8 unsigned long login_flags; struct delayed_work login_work; struct delayed_work login_cleanup_work; From 5e0cf5e6c43b9e19fc0284f69e5cd2b4a47523b0 Mon Sep 17 00:00:00 2001 From: Jiang Yi Date: Tue, 16 May 2017 17:57:55 +0800 Subject: [PATCH 0297/1065] iscsi-target: Always wait for kthread_should_stop() before kthread exit There are three timing problems in the kthread usages of iscsi_target_mod: - np_thread of struct iscsi_np - rx_thread and tx_thread of struct iscsi_conn In iscsit_close_connection(), it calls send_sig(SIGINT, conn->tx_thread, 1); kthread_stop(conn->tx_thread); In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive SIGINT the kthread will exit without checking the return value of kthread_should_stop(). So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...) and kthread_stop(...), the kthread_stop() will try to stop an already stopped kthread. This is invalid according to the documentation of kthread_stop(). (Fix -ECONNRESET logout handling in iscsi_target_tx_thread and early iscsi_target_rx_thread failure case - nab) Signed-off-by: Jiang Yi Cc: # v3.12+ Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 30 ++++++++++++++++++----- drivers/target/iscsi/iscsi_target_erl0.c | 6 ++++- drivers/target/iscsi/iscsi_target_erl0.h | 2 +- drivers/target/iscsi/iscsi_target_login.c | 4 +++ 4 files changed, 34 insertions(+), 8 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 26a9bcd5ee6a..0d8f81591bed 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3790,6 +3790,8 @@ int iscsi_target_tx_thread(void *arg) { int ret = 0; struct iscsi_conn *conn = arg; + bool conn_freed = false; + /* * Allow ourselves to be interrupted by SIGINT so that a * connection recovery / failure event can be triggered externally. @@ -3815,12 +3817,14 @@ get_immediate: goto transport_err; ret = iscsit_handle_response_queue(conn); - if (ret == 1) + if (ret == 1) { goto get_immediate; - else if (ret == -ECONNRESET) + } else if (ret == -ECONNRESET) { + conn_freed = true; goto out; - else if (ret < 0) + } else if (ret < 0) { goto transport_err; + } } transport_err: @@ -3830,8 +3834,13 @@ transport_err: * responsible for cleaning up the early connection failure. */ if (conn->conn_state != TARG_CONN_STATE_IN_LOGIN) - iscsit_take_action_for_connection_exit(conn); + iscsit_take_action_for_connection_exit(conn, &conn_freed); out: + if (!conn_freed) { + while (!kthread_should_stop()) { + msleep(100); + } + } return 0; } @@ -4004,6 +4013,7 @@ int iscsi_target_rx_thread(void *arg) { int rc; struct iscsi_conn *conn = arg; + bool conn_freed = false; /* * Allow ourselves to be interrupted by SIGINT so that a @@ -4016,7 +4026,7 @@ int iscsi_target_rx_thread(void *arg) */ rc = wait_for_completion_interruptible(&conn->rx_login_comp); if (rc < 0 || iscsi_target_check_conn_state(conn)) - return 0; + goto out; if (!conn->conn_transport->iscsit_get_rx_pdu) return 0; @@ -4025,7 +4035,15 @@ int iscsi_target_rx_thread(void *arg) if (!signal_pending(current)) atomic_set(&conn->transport_failed, 1); - iscsit_take_action_for_connection_exit(conn); + iscsit_take_action_for_connection_exit(conn, &conn_freed); + +out: + if (!conn_freed) { + while (!kthread_should_stop()) { + msleep(100); + } + } + return 0; } diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c index 9a96e17bf7cd..7fe2aa73cff6 100644 --- a/drivers/target/iscsi/iscsi_target_erl0.c +++ b/drivers/target/iscsi/iscsi_target_erl0.c @@ -930,8 +930,10 @@ static void iscsit_handle_connection_cleanup(struct iscsi_conn *conn) } } -void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn) +void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn, bool *conn_freed) { + *conn_freed = false; + spin_lock_bh(&conn->state_lock); if (atomic_read(&conn->connection_exit)) { spin_unlock_bh(&conn->state_lock); @@ -942,6 +944,7 @@ void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn) if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT) { spin_unlock_bh(&conn->state_lock); iscsit_close_connection(conn); + *conn_freed = true; return; } @@ -955,4 +958,5 @@ void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn) spin_unlock_bh(&conn->state_lock); iscsit_handle_connection_cleanup(conn); + *conn_freed = true; } diff --git a/drivers/target/iscsi/iscsi_target_erl0.h b/drivers/target/iscsi/iscsi_target_erl0.h index 60e69e2af6ed..3822d9cd1230 100644 --- a/drivers/target/iscsi/iscsi_target_erl0.h +++ b/drivers/target/iscsi/iscsi_target_erl0.h @@ -15,6 +15,6 @@ extern int iscsit_stop_time2retain_timer(struct iscsi_session *); extern void iscsit_connection_reinstatement_rcfr(struct iscsi_conn *); extern void iscsit_cause_connection_reinstatement(struct iscsi_conn *, int); extern void iscsit_fall_back_to_erl0(struct iscsi_session *); -extern void iscsit_take_action_for_connection_exit(struct iscsi_conn *); +extern void iscsit_take_action_for_connection_exit(struct iscsi_conn *, bool *); #endif /*** ISCSI_TARGET_ERL0_H ***/ diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 66238477137b..92b96b51d506 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -1464,5 +1464,9 @@ int iscsi_target_login_thread(void *arg) break; } + while (!kthread_should_stop()) { + msleep(100); + } + return 0; } From 9094367a9161858004eacb7373aa2bf48c51c16d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 19 May 2017 10:04:31 +0200 Subject: [PATCH 0298/1065] scsi: lpfc: nvmet_fc: fix format string The lpfc_nvmeio_data() tracing helper always takes a format string and three additional arguments. The latest caller has a format string with only two integer arguments, causing this harmless warning: drivers/scsi/lpfc/lpfc_nvmet.c: In function 'lpfc_nvmet_xmt_fcp_release': drivers/scsi/lpfc/lpfc_nvmet.c:802:25: error: too many arguments for format [-Werror=format-extra-args] lpfc_nvmeio_data(phba, "NVMET FCP FREE: xri x%x ste %d\n", ctxp->oxid, We could add a dummy argument here, but it seems reasonable to print the 'abort' flag as the third argument. Fixes: 19b58d9473e8 ("nvmet_fc: add req_release to lldd api") Signed-off-by: Arnd Bergmann Acked-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_nvmet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c index f94294b77b7b..24d54dd016d4 100644 --- a/drivers/scsi/lpfc/lpfc_nvmet.c +++ b/drivers/scsi/lpfc/lpfc_nvmet.c @@ -799,8 +799,8 @@ lpfc_nvmet_xmt_fcp_release(struct nvmet_fc_target_port *tgtport, } spin_unlock_irqrestore(&ctxp->ctxlock, flags); - lpfc_nvmeio_data(phba, "NVMET FCP FREE: xri x%x ste %d\n", ctxp->oxid, - ctxp->state, 0); + lpfc_nvmeio_data(phba, "NVMET FCP FREE: xri x%x ste %d abt %d\n", ctxp->oxid, + ctxp->state, aborting); atomic_inc(&lpfc_nvmep->xmt_fcp_release); From 7c9fdfb7000715df2d187df251d11e4850ce94c8 Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Wed, 24 May 2017 18:48:51 -0300 Subject: [PATCH 0299/1065] scsi: lpfc: Avoid NULL pointer dereference in lpfc_els_abort() We might have a NULL pring in lpfc_els_abort(), for example on error recovery path, since queues are destroyed during error recovery mechanism. In this case, we should just drop the abort since the queues will be recreated anyway. This patch just verifies for NULL pointer and stop the abortion of the queue in case of a NULL pring. Also, this patch converts return type of lpfc_els_abort() from int to void, since it's not checked anywhere. Reported-by: Harsha Thyagaraja Reported-by: Naresh Bannoth Tested-by: Raphael Silva Signed-off-by: Guilherme G. Piccoli Reviewed-by: Johannes Thumshirn Acked-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_crtn.h | 2 +- drivers/scsi/lpfc/lpfc_nportdisc.c | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 8912767e7bc8..da669dce12fe 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -127,7 +127,7 @@ int lpfc_disc_state_machine(struct lpfc_vport *, struct lpfc_nodelist *, void *, void lpfc_do_scr_ns_plogi(struct lpfc_hba *, struct lpfc_vport *); int lpfc_check_sparm(struct lpfc_vport *, struct lpfc_nodelist *, struct serv_parm *, uint32_t, int); -int lpfc_els_abort(struct lpfc_hba *, struct lpfc_nodelist *); +void lpfc_els_abort(struct lpfc_hba *, struct lpfc_nodelist *); void lpfc_more_plogi(struct lpfc_vport *); void lpfc_more_adisc(struct lpfc_vport *); void lpfc_end_rscn(struct lpfc_vport *); diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index bff3de053df4..f74cb0142fd4 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -206,7 +206,7 @@ lpfc_check_elscmpl_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, * associated with a LPFC_NODELIST entry. This * routine effectively results in a "software abort". */ -int +void lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) { LIST_HEAD(abort_list); @@ -215,6 +215,10 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) pring = lpfc_phba_elsring(phba); + /* In case of error recovery path, we might have a NULL pring here */ + if (!pring) + return; + /* Abort outstanding I/O on NPort */ lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY, "2819 Abort outstanding I/O on NPort x%x " @@ -273,7 +277,6 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) IOSTAT_LOCAL_REJECT, IOERR_SLI_ABORTED); lpfc_cancel_retry_delay_tmo(phba->pport, ndlp); - return 0; } static int From e6ef6a77f51e403a1400241b9d029ecaba45a834 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 23 May 2017 10:09:28 -0500 Subject: [PATCH 0300/1065] scsi: lpfc: prevent potential null pointer dereference Null check at line 966: if (ndlp) {, implies that ndlp might be NULL. Functions lpfc_nlp_set_state() and lpfc_issue_els_prli() dereference pointer ndlp. Include these function calls inside the IF block that tests pointer ndlp. Addresses-Coverity-ID: 1401856 Signed-off-by: Gustavo A. R. Silva Acked-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_ct.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index f2cd19c6c2df..24ce96dcc94d 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -978,9 +978,10 @@ lpfc_cmpl_ct_cmd_gft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, ndlp, did, ndlp->nlp_fc4_type, FC_TYPE_FCP, FC_TYPE_NVME); ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE; + + lpfc_nlp_set_state(vport, ndlp, NLP_STE_PRLI_ISSUE); + lpfc_issue_els_prli(vport, ndlp, 0); } - lpfc_nlp_set_state(vport, ndlp, NLP_STE_PRLI_ISSUE); - lpfc_issue_els_prli(vport, ndlp, 0); } else lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, "3065 GFT_ID failed x%08x\n", irsp->ulpStatus); From 4cd3b6ebff8510b2139d64024411207090cfe0a9 Mon Sep 17 00:00:00 2001 From: Bill Kuzeja Date: Thu, 25 May 2017 15:26:31 -0400 Subject: [PATCH 0301/1065] scsi: qla2xxx: Fix extraneous ref on sp's after adapter break Hung task timeouts can result if a qlogic board breaks unexpectedly while running I/O. These tasks become hung because command srb reference counts are not going to zero, hence the affected srbs and commands do not get freed. This fix accounts for this extra reference in the srbs in the case of a board failure. Fixes: a465537ad1a4 ("qla2xxx: Disable the adapter and skip error recovery in case of register disconnect") Signed-off-by: Bill Kuzeja Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 2a2ce7476339..79f050256c55 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1640,7 +1640,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha) void qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) { - int que, cnt; + int que, cnt, status; unsigned long flags; srb_t *sp; struct qla_hw_data *ha = vha->hw; @@ -1670,8 +1670,12 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) */ sp_get(sp); spin_unlock_irqrestore(&ha->hardware_lock, flags); - qla2xxx_eh_abort(GET_CMD_SP(sp)); + status = qla2xxx_eh_abort(GET_CMD_SP(sp)); spin_lock_irqsave(&ha->hardware_lock, flags); + /* Get rid of extra reference if immediate exit + * from ql2xxx_eh_abort */ + if (status == FAILED && (qla2x00_isp_reg_stat(ha))) + atomic_dec(&sp->ref_count); } req->outstanding_cmds[cnt] = NULL; sp->done(sp, res); From 70bdf2026d905b8bfa0a455d35018df3e9777a6c Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 19 May 2017 12:39:36 -0400 Subject: [PATCH 0302/1065] scsi: scsi_debug: Avoid PI being disabled when TPGS is enabled It was not possible to enable both T10 PI and TPGS because they share the same byte in the INQUIRY response. Logically OR the TPGS value instead of using assignment. Reported-by: Ritika Srivastava Reviewed-by: Bart Van Assche Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 17249c3650fe..dc095a292c61 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -1404,7 +1404,7 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) arr[4] = SDEBUG_LONG_INQ_SZ - 5; arr[5] = (int)have_dif_prot; /* PROTECT bit */ if (sdebug_vpd_use_hostno == 0) - arr[5] = 0x10; /* claim: implicit TGPS */ + arr[5] |= 0x10; /* claim: implicit TPGS */ arr[6] = 0x10; /* claim: MultiP */ /* arr[6] |= 0x40; ... claim: EncServ (enclosure services) */ arr[7] = 0xa; /* claim: LINKED + CMDQUE */ From d2c3b14e1f0dcebdb695617c0c1342a36b914a47 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 1 Jun 2017 09:35:30 +0200 Subject: [PATCH 0303/1065] ALSA: hda - Fix applying MSI dual-codec mobo quirk The previous commit [63691587f7b0: ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo] attempted to apply the existing dual-codec quirk for a MSI mobo. But it turned out that this isn't applied properly due to the MSI-vendor quirk before this entry. I overlooked such two MSI entries just because they were put in the wrong position, although we have a list ordered by PCI SSID numbers. This patch fixes it by rearranging the unordered entries. Fixes: 63691587f7b0 ("ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo") Reported-by: Rudolf Schmidt Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 918e45268915..a57988d617e9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2324,11 +2324,11 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC889_FIXUP_MBA11_VREF), SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC882_FIXUP_EAPD), - SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD), - SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3), SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE), SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS), + SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD), SND_PCI_QUIRK(0x1462, 0xda57, "MSI Z270-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS), + SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3), SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX), SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD), From 1dbf647f31751a4e94fa0435c34f0f5ad5ce0adc Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Fri, 26 May 2017 13:02:55 +0200 Subject: [PATCH 0304/1065] brcmfmac: fix alignment configuration on host using 64-bit DMA For SDIO the alignment requirement for transfers from device to host is configured in firmware. This configuration is limited to minimum of 4-byte alignment. However, this is not correct for platforms using 64-bit DMA when the minimum alignment should be 8 bytes. This issue appeared when the ALIGNMENT definition was set according the DMA configuration. The configuration in firmware was not using that macro defintion, but a hardcoded value of 4. Hence the driver reported alignment failures for data coming from the device and causing transfers to fail. Fixes: 6e84ab604bde ("brcmfmac: properly align buffers on certain platforms Reported-by: Hans de Goede Tested-by: Hans de Goede Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Hans de Goede Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index fc64b8913aa6..e03450059b06 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -3422,7 +3422,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev) /* otherwise, set txglomalign */ value = sdiodev->settings->bus.sdio.sd_sgentry_align; /* SDIO ADMA requires at least 32 bit alignment */ - value = max_t(u32, value, 4); + value = max_t(u32, value, ALIGNMENT); err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value, sizeof(u32)); } From d9c1b5431d5f0e07575db785a022bce91051ac1d Mon Sep 17 00:00:00 2001 From: Roman Pen Date: Thu, 1 Jun 2017 10:55:03 +0200 Subject: [PATCH 0305/1065] KVM: SVM: do not zero out segment attributes if segment is unusable or not present MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a fix for the problem [1], where VMCB.CPL was set to 0 and interrupt was taken on userspace stack. The root cause lies in the specific AMD CPU behaviour which manifests itself as unusable segment attributes on SYSRET. The corresponding work around for the kernel is the following: 61f01dd941ba ("x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue") In other turn virtualization side treated unusable segment incorrectly and restored CPL from SS attributes, which were zeroed out few lines above. In current patch it is assured only that P bit is cleared in VMCB.save state and segment attributes are not zeroed out if segment is not presented or is unusable, therefore CPL can be safely restored from DPL field. This is only one part of the fix, since QEMU side should be fixed accordingly not to zero out attributes on its side. Corresponding patch will follow. [1] Message id: CAJrWOzD6Xq==b-zYCDdFLgSRMPM-NkNuTSDFEtX=7MreT45i7Q@mail.gmail.com Signed-off-by: Roman Pen Signed-off-by: Mikhail Sennikovskii Cc: Paolo Bonzini Cc: Radim KrÄmář Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index a654372efea1..ba9891ac5c56 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1840,6 +1840,7 @@ static void svm_get_segment(struct kvm_vcpu *vcpu, */ if (var->unusable) var->db = 0; + /* This is symmetric with svm_set_segment() */ var->dpl = to_svm(vcpu)->vmcb->save.cpl; break; } @@ -1980,18 +1981,14 @@ static void svm_set_segment(struct kvm_vcpu *vcpu, s->base = var->base; s->limit = var->limit; s->selector = var->selector; - if (var->unusable) - s->attrib = 0; - else { - s->attrib = (var->type & SVM_SELECTOR_TYPE_MASK); - s->attrib |= (var->s & 1) << SVM_SELECTOR_S_SHIFT; - s->attrib |= (var->dpl & 3) << SVM_SELECTOR_DPL_SHIFT; - s->attrib |= (var->present & 1) << SVM_SELECTOR_P_SHIFT; - s->attrib |= (var->avl & 1) << SVM_SELECTOR_AVL_SHIFT; - s->attrib |= (var->l & 1) << SVM_SELECTOR_L_SHIFT; - s->attrib |= (var->db & 1) << SVM_SELECTOR_DB_SHIFT; - s->attrib |= (var->g & 1) << SVM_SELECTOR_G_SHIFT; - } + s->attrib = (var->type & SVM_SELECTOR_TYPE_MASK); + s->attrib |= (var->s & 1) << SVM_SELECTOR_S_SHIFT; + s->attrib |= (var->dpl & 3) << SVM_SELECTOR_DPL_SHIFT; + s->attrib |= ((var->present & 1) && !var->unusable) << SVM_SELECTOR_P_SHIFT; + s->attrib |= (var->avl & 1) << SVM_SELECTOR_AVL_SHIFT; + s->attrib |= (var->l & 1) << SVM_SELECTOR_L_SHIFT; + s->attrib |= (var->db & 1) << SVM_SELECTOR_DB_SHIFT; + s->attrib |= (var->g & 1) << SVM_SELECTOR_G_SHIFT; /* * This is always accurate, except if SYSRET returned to a segment @@ -2000,7 +1997,8 @@ static void svm_set_segment(struct kvm_vcpu *vcpu, * would entail passing the CPL to userspace and back. */ if (seg == VCPU_SREG_SS) - svm->vmcb->save.cpl = (s->attrib >> SVM_SELECTOR_DPL_SHIFT) & 3; + /* This is symmetric with svm_get_segment() */ + svm->vmcb->save.cpl = (var->dpl & 3); mark_dirty(svm->vmcb, VMCB_SEG); } From 47a66eed99e6f231f4a1d261a9d493f4eee94829 Mon Sep 17 00:00:00 2001 From: ZhuangYanying Date: Fri, 26 May 2017 13:16:48 +0800 Subject: [PATCH 0306/1065] KVM: x86: Fix nmi injection failure when vcpu got blocked When spin_lock_irqsave() deadlock occurs inside the guest, vcpu threads, other than the lock-holding one, would enter into S state because of pvspinlock. Then inject NMI via libvirt API "inject-nmi", the NMI could not be injected into vm. The reason is: 1 It sets nmi_queued to 1 when calling ioctl KVM_NMI in qemu, and sets cpu->kvm_vcpu_dirty to true in do_inject_external_nmi() meanwhile. 2 It sets nmi_queued to 0 in process_nmi(), before entering guest, because cpu->kvm_vcpu_dirty is true. It's not enough just to check nmi_queued to decide whether to stay in vcpu_block() or not. NMI should be injected immediately at any situation. Add checking nmi_pending, and testing KVM_REQ_NMI replaces nmi_queued in vm_vcpu_has_events(). Do the same change for SMIs. Signed-off-by: Zhuang Yanying Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 02363e37d4a6..a2cd0997343c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -8394,10 +8394,13 @@ static inline bool kvm_vcpu_has_events(struct kvm_vcpu *vcpu) if (vcpu->arch.pv.pv_unhalted) return true; - if (atomic_read(&vcpu->arch.nmi_queued)) + if (kvm_test_request(KVM_REQ_NMI, vcpu) || + (vcpu->arch.nmi_pending && + kvm_x86_ops->nmi_allowed(vcpu))) return true; - if (kvm_test_request(KVM_REQ_SMI, vcpu)) + if (kvm_test_request(KVM_REQ_SMI, vcpu) || + (vcpu->arch.smi_pending && !is_smm(vcpu))) return true; if (kvm_arch_interrupt_allowed(vcpu) && From 9605bc46433d54f89b12d443a3d9aabf8070824b Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Tue, 16 May 2017 20:41:45 +0800 Subject: [PATCH 0307/1065] phy: qualcomm: phy-qcom-qmp: fix application of sizeof to pointer drivers/phy/qualcomm/phy-qcom-qmp.c:847:37-43: ERROR: application of sizeof to pointer sizeof when applied to a pointer typed expression gives the size of the pointer Generated by: scripts/coccinelle/misc/noderef.cocci CC: Vivek Gautam Signed-off-by: Fengguang Wu Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-qcom-qmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-qcom-qmp.c b/drivers/phy/phy-qcom-qmp.c index a25c29d5fdf6..78ca62897784 100644 --- a/drivers/phy/phy-qcom-qmp.c +++ b/drivers/phy/phy-qcom-qmp.c @@ -844,7 +844,7 @@ static int qcom_qmp_phy_vreg_init(struct device *dev) int num = qmp->cfg->num_vregs; int i; - qmp->vregs = devm_kcalloc(dev, num, sizeof(qmp->vregs), GFP_KERNEL); + qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL); if (!qmp->vregs) return -ENOMEM; From a2b05b7aa60e1e9b60faf01dfb1cca35638d1ab1 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Thu, 11 May 2017 21:24:41 +1000 Subject: [PATCH 0308/1065] powerpc/64s: Add dt_cpu_ftrs boot time setup option Provide a dt_cpu_ftrs= cmdline option to disable the dt_cpu_ftrs CPU feature discovery, and fall back to the "cputable" based version. Also allow control of advertising unknown features to userspace and with this parameter, and remove the clunky CONFIG option. Signed-off-by: Nicholas Piggin [mpe: Add explicit early check of bootargs in dt_cpu_ftrs_init()] Signed-off-by: Michael Ellerman --- .../admin-guide/kernel-parameters.txt | 9 +++ arch/powerpc/Kconfig | 5 -- arch/powerpc/kernel/dt_cpu_ftrs.c | 57 ++++++++++++++++--- 3 files changed, 57 insertions(+), 14 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 15f79c27748d..0f5c3b4347c6 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -866,6 +866,15 @@ dscc4.setup= [NET] + dt_cpu_ftrs= [PPC] + Format: {"off" | "known"} + Control how the dt_cpu_ftrs device-tree binding is + used for CPU feature discovery and setup (if it + exists). + off: Do not use it, fall back to legacy cpu table. + known: Do not pass through unknown features to guests + or userspace, only those that the kernel is aware of. + dump_apple_properties [X86] Dump name and content of EFI device properties on x86 Macs. Useful for driver authors to determine diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index f7c8f9972f61..4a4a05afcaf7 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -391,11 +391,6 @@ config PPC_DT_CPU_FTRS firmware provides this binding. If you're not sure say Y. -config PPC_CPUFEATURES_ENABLE_UNKNOWN - bool "cpufeatures pass through unknown features to guest/userspace" - depends on PPC_DT_CPU_FTRS - default y - config HIGHMEM bool "High memory support" depends on PPC32 diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c index fcc7588a96d6..76eebba13a1d 100644 --- a/arch/powerpc/kernel/dt_cpu_ftrs.c +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -671,12 +672,24 @@ static struct dt_cpu_feature_match __initdata {"wait-v3", feat_enable, 0}, }; -/* XXX: how to configure this? Default + boot time? */ -#ifdef CONFIG_PPC_CPUFEATURES_ENABLE_UNKNOWN -#define CPU_FEATURE_ENABLE_UNKNOWN 1 -#else -#define CPU_FEATURE_ENABLE_UNKNOWN 0 -#endif +static bool __initdata using_dt_cpu_ftrs; +static bool __initdata enable_unknown = true; + +static int __init dt_cpu_ftrs_parse(char *str) +{ + if (!str) + return 0; + + if (!strcmp(str, "off")) + using_dt_cpu_ftrs = false; + else if (!strcmp(str, "known")) + enable_unknown = false; + else + return 1; + + return 0; +} +early_param("dt_cpu_ftrs", dt_cpu_ftrs_parse); static void __init cpufeatures_setup_start(u32 isa) { @@ -707,7 +720,7 @@ static bool __init cpufeatures_process_feature(struct dt_cpu_feature *f) } } - if (!known && CPU_FEATURE_ENABLE_UNKNOWN) { + if (!known && enable_unknown) { if (!feat_try_enable_unknown(f)) { pr_info("not enabling: %s (unknown and unsupported by kernel)\n", f->name); @@ -756,6 +769,26 @@ static void __init cpufeatures_setup_finished(void) cur_cpu_spec->cpu_features, cur_cpu_spec->mmu_features); } +static int __init disabled_on_cmdline(void) +{ + unsigned long root, chosen; + const char *p; + + root = of_get_flat_dt_root(); + chosen = of_get_flat_dt_subnode_by_name(root, "chosen"); + if (chosen == -FDT_ERR_NOTFOUND) + return false; + + p = of_get_flat_dt_prop(chosen, "bootargs", NULL); + if (!p) + return false; + + if (strstr(p, "dt_cpu_ftrs=off")) + return true; + + return false; +} + static int __init fdt_find_cpu_features(unsigned long node, const char *uname, int depth, void *data) { @@ -766,8 +799,6 @@ static int __init fdt_find_cpu_features(unsigned long node, const char *uname, return 0; } -static bool __initdata using_dt_cpu_ftrs = false; - bool __init dt_cpu_ftrs_in_use(void) { return using_dt_cpu_ftrs; @@ -775,6 +806,8 @@ bool __init dt_cpu_ftrs_in_use(void) bool __init dt_cpu_ftrs_init(void *fdt) { + using_dt_cpu_ftrs = false; + /* Setup and verify the FDT, if it fails we just bail */ if (!early_init_dt_verify(fdt)) return false; @@ -782,6 +815,9 @@ bool __init dt_cpu_ftrs_init(void *fdt) if (!of_scan_flat_dt(fdt_find_cpu_features, NULL)) return false; + if (disabled_on_cmdline()) + return false; + cpufeatures_setup_cpu(); using_dt_cpu_ftrs = true; @@ -1027,5 +1063,8 @@ static int __init dt_cpu_ftrs_scan_callback(unsigned long node, const char void __init dt_cpu_ftrs_scan(void) { + if (!using_dt_cpu_ftrs) + return; + of_scan_flat_dt(dt_cpu_ftrs_scan_callback, NULL); } From 99acc9bede06bbb2662aafff51f5b9e529fa845e Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 29 May 2017 20:26:07 +1000 Subject: [PATCH 0309/1065] powerpc/spufs: Fix coredump of SPU contexts If a process dumps core while it has SPU contexts active then we have code to also dump information about the SPU contexts. Unfortunately it's been broken for 3 1/2 years, and we didn't notice. In commit 7b1f4020d0d1 ("spufs: get rid of dump_emit() wrappers") the nread variable was removed and rc used instead. That means when the loop exits successfully, rc has the number of bytes read, but it's then used as the return value for the function, which should return 0 on success. So fix it by setting rc = 0 before returning in the success case. Fixes: 7b1f4020d0d1 ("spufs: get rid of dump_emit() wrappers") Signed-off-by: Michael Ellerman Acked-by: Jeremy Kerr Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/cell/spufs/coredump.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c index e5a891ae80ee..84b7ac926ce6 100644 --- a/arch/powerpc/platforms/cell/spufs/coredump.c +++ b/arch/powerpc/platforms/cell/spufs/coredump.c @@ -175,6 +175,8 @@ static int spufs_arch_write_note(struct spu_context *ctx, int i, skip = roundup(cprm->pos - total + sz, 4) - cprm->pos; if (!dump_skip(cprm, skip)) goto Eio; + + rc = 0; out: free_page((unsigned long)buf); return rc; From 6f553912eedafae13ff20b322a65e471fe7f5236 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 24 May 2017 10:01:55 +0200 Subject: [PATCH 0310/1065] powerpc/sysdev/simple_gpio: Fix oops in gpio save_regs function of_mm_gpiochip_add_data() generates an oops for NULL pointer dereference. of_mm_gpiochip_add_data() calls mm_gc->save_regs() before setting the data, therefore ->save_regs() cannot use gpiochip_get_data() Fixes: 937daafca774 ("powerpc: simple-gpio: use gpiochip data pointer") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Christophe Leroy Reviewed-by: Linus Walleij Signed-off-by: Michael Ellerman --- arch/powerpc/sysdev/simple_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c index ef470b470b04..6afddae2fb47 100644 --- a/arch/powerpc/sysdev/simple_gpio.c +++ b/arch/powerpc/sysdev/simple_gpio.c @@ -75,7 +75,8 @@ static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc) { - struct u8_gpio_chip *u8_gc = gpiochip_get_data(&mm_gc->gc); + struct u8_gpio_chip *u8_gc = + container_of(mm_gc, struct u8_gpio_chip, mm_gc); u8_gc->data = in_8(mm_gc->regs); } From dc421b200f91930c9c6a9586810ff8c232cf10fc Mon Sep 17 00:00:00 2001 From: Michael Bringmann Date: Mon, 22 May 2017 15:44:37 -0500 Subject: [PATCH 0311/1065] powerpc/hotplug-mem: Fix missing endian conversion of aa_index When adding or removing memory, the aa_index (affinity value) for the memblock must also be converted to match the endianness of the rest of the 'ibm,dynamic-memory' property. Otherwise, subsequent retrieval of the attribute will likely lead to non-existent nodes, followed by using the default node in the code inappropriately. Fixes: 5f97b2a0d176 ("powerpc/pseries: Implement memory hotplug add in the kernel") Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Michael Bringmann Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/pseries/hotplug-memory.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index e104c71ea44a..1fb162ba9d1c 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -124,6 +124,7 @@ static struct property *dlpar_clone_drconf_property(struct device_node *dn) for (i = 0; i < num_lmbs; i++) { lmbs[i].base_addr = be64_to_cpu(lmbs[i].base_addr); lmbs[i].drc_index = be32_to_cpu(lmbs[i].drc_index); + lmbs[i].aa_index = be32_to_cpu(lmbs[i].aa_index); lmbs[i].flags = be32_to_cpu(lmbs[i].flags); } @@ -147,6 +148,7 @@ static void dlpar_update_drconf_property(struct device_node *dn, for (i = 0; i < num_lmbs; i++) { lmbs[i].base_addr = cpu_to_be64(lmbs[i].base_addr); lmbs[i].drc_index = cpu_to_be32(lmbs[i].drc_index); + lmbs[i].aa_index = cpu_to_be32(lmbs[i].aa_index); lmbs[i].flags = cpu_to_be32(lmbs[i].flags); } From 0e5e7f5e9700661c3ddd95501743fb52fec1ab07 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 25 May 2017 16:33:52 +1000 Subject: [PATCH 0312/1065] powerpc/64: Reclaim CPU_FTR_SUBCORE We are running low on CPU feature bits, so we only want to use them when it's really necessary. CPU_FTR_SUBCORE is only used in one place, and only in C, so we don't need it in order to make asm patching work. It can only be set on "Power8" CPUs, which in practice means POWER8, POWER8E and POWER8NVL. There are no plans to implement it on future CPUs, but if there ever were we could retrofit it then. Although KVM uses subcores, it never looks at the CPU feature, it either looks at the ISA level or the threads_per_subcore value. So drop the CPU feature and do a PVR check instead. Drop the device tree "subcore" feature as we no longer support doing anything with it, and we will drop it from skiboot too. Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/cputable.h | 3 +-- arch/powerpc/kernel/dt_cpu_ftrs.c | 1 - arch/powerpc/platforms/powernv/subcore.c | 8 +++++++- 3 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index c2d509584a98..d02ad93bf708 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -214,7 +214,6 @@ enum { #define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000) #define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000) #define CPU_FTR_PMAO_BUG LONG_ASM_CONST(0x1000000000000000) -#define CPU_FTR_SUBCORE LONG_ASM_CONST(0x2000000000000000) #define CPU_FTR_POWER9_DD1 LONG_ASM_CONST(0x4000000000000000) #ifndef __ASSEMBLY__ @@ -463,7 +462,7 @@ enum { CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \ CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \ - CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_SUBCORE) + CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP) #define CPU_FTRS_POWER8E (CPU_FTRS_POWER8 | CPU_FTR_PMAO_BUG) #define CPU_FTRS_POWER8_DD1 (CPU_FTRS_POWER8 & ~CPU_FTR_DBELL) #define CPU_FTRS_POWER9 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c index 76eebba13a1d..4c7656dc4e04 100644 --- a/arch/powerpc/kernel/dt_cpu_ftrs.c +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c @@ -643,7 +643,6 @@ static struct dt_cpu_feature_match __initdata {"processor-control-facility", feat_enable_dbell, CPU_FTR_DBELL}, {"processor-control-facility-v3", feat_enable_dbell, CPU_FTR_DBELL}, {"processor-utilization-of-resources-register", feat_enable_purr, 0}, - {"subcore", feat_enable, CPU_FTR_SUBCORE}, {"no-execute", feat_enable, 0}, {"strong-access-ordering", feat_enable, CPU_FTR_SAO}, {"cache-inhibited-large-page", feat_enable_large_ci, 0}, diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c index 0babef11136f..8c6119280c13 100644 --- a/arch/powerpc/platforms/powernv/subcore.c +++ b/arch/powerpc/platforms/powernv/subcore.c @@ -407,7 +407,13 @@ static DEVICE_ATTR(subcores_per_core, 0644, static int subcore_init(void) { - if (!cpu_has_feature(CPU_FTR_SUBCORE)) + unsigned pvr_ver; + + pvr_ver = PVR_VER(mfspr(SPRN_PVR)); + + if (pvr_ver != PVR_POWER8 && + pvr_ver != PVR_POWER8E && + pvr_ver != PVR_POWER8NVL) return 0; /* From 54265664c15a68905d8d67d19205e9a767636434 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 31 May 2017 13:35:57 +0200 Subject: [PATCH 0313/1065] perf trace: Add mmap alias for s390 The s390 architecture maps sys_mmap (nr 90) into sys_old_mmap. For this reason perf trace can't find the proper syscall event to get args format from and displays it wrongly as 'continued'. To fix that fill the "alias" field with "old_mmap" for trace's mmap record to get the correct translation. Before: 0.042 ( 0.011 ms): vest/43052 fstat(statbuf: 0x3ffff89fd90 ) = 0 0.042 ( 0.028 ms): vest/43052 ... [continued]: mmap()) = 0x3fffd6e2000 0.072 ( 0.025 ms): vest/43052 read(buf: 0x3fffd6e2000, count: 4096 ) = 6 After: 0.045 ( 0.011 ms): fstat(statbuf: 0x3ffff8a0930 ) = 0 0.057 ( 0.018 ms): mmap(arg: 0x3ffff8a0858 ) = 0x3fffd14a000 0.076 ( 0.025 ms): read(buf: 0x3fffd14a000, count: 4096 ) = 6 Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20170531113557.19175-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-trace.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index d014350adc52..4b2a5d298197 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -681,6 +681,10 @@ static struct syscall_fmt { { .name = "mlockall", .errmsg = true, .arg_scnprintf = { [0] = SCA_HEX, /* addr */ }, }, { .name = "mmap", .hexret = true, +/* The standard mmap maps to old_mmap on s390x */ +#if defined(__s390x__) + .alias = "old_mmap", +#endif .arg_scnprintf = { [0] = SCA_HEX, /* addr */ [2] = SCA_MMAP_PROT, /* prot */ [3] = SCA_MMAP_FLAGS, /* flags */ }, }, From c08d517480ea342cc43acdacc5cf4a795e18151d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 1 Jun 2017 15:52:23 +0200 Subject: [PATCH 0314/1065] Revert "x86/PAT: Fix Xorg regression on CPUs that don't support PAT" This reverts commit cbed27cdf0e3f7ea3b2259e86b9e34df02be3fe4. As Andy Lutomirski observed: "I think this patch is bogus. pat_enabled() sure looks like it's supposed to return true if PAT is *enabled*, and these days PAT is 'enabled' even if there's no HW PAT support." Reported-by: Bernhard Held Reported-by: Chris Wilson Acked-by: Andy Lutomirski Cc: Andrew Morton Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Luis R. Rodriguez Cc: Mikulas Patocka Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Toshi Kani Cc: stable@vger.kernel.org # v4.2+ Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/mm/pat.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 83a59a67757a..9b78685b66e6 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -65,11 +65,9 @@ static int __init nopat(char *str) } early_param("nopat", nopat); -static bool __read_mostly __pat_initialized = false; - bool pat_enabled(void) { - return __pat_initialized; + return !!__pat_enabled; } EXPORT_SYMBOL_GPL(pat_enabled); @@ -227,14 +225,13 @@ static void pat_bsp_init(u64 pat) } wrmsrl(MSR_IA32_CR_PAT, pat); - __pat_initialized = true; __init_cache_modes(pat); } static void pat_ap_init(u64 pat) { - if (!this_cpu_has(X86_FEATURE_PAT)) { + if (!boot_cpu_has(X86_FEATURE_PAT)) { /* * If this happens we are on a secondary CPU, but switched to * PAT on the boot CPU. We have no way to undo PAT. @@ -309,7 +306,7 @@ void pat_init(void) u64 pat; struct cpuinfo_x86 *c = &boot_cpu_data; - if (!__pat_enabled) { + if (!pat_enabled()) { init_cache_modes(); return; } From cc2b702c52094b637a351d7491ac5200331d0445 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Fri, 12 May 2017 01:03:52 +0200 Subject: [PATCH 0315/1065] btrfs: use correct types for page indices in btrfs_page_exists_in_range Variables start_idx and end_idx are supposed to hold a page index derived from the file offsets. The int type is not the right one though, offsets larger than 1 << 44 will get silently trimmed off the high bits. (1 << 44 is 16TiB) What can go wrong, if start is below the boundary and end gets trimmed: - if there's a page after start, we'll find it (radix_tree_gang_lookup_slot) - the final check "if (page->index <= end_idx)" will unexpectedly fail The function will return false, ie. "there's no page in the range", although there is at least one. btrfs_page_exists_in_range is used to prevent races in: * in hole punching, where we make sure there are not pages in the truncated range, otherwise we'll wait for them to finish and redo truncation, but we're going to replace the pages with holes anyway so the only problem is the intermediate state * lock_extent_direct: we want to make sure there are no pages before we lock and start DIO, to prevent stale data reads For practical occurence of the bug, there are several constaints. The file must be quite large, the affected range must cross the 16TiB boundary and the internal state of the file pages and pending operations must match. Also, we must not have started any ordered data in the range, otherwise we don't even reach the buggy function check. DIO locking tries hard in several places to avoid deadlocks with buffered IO and avoids waiting for ranges. The worst consequence seems to be stale data read. CC: Liu Bo CC: stable@vger.kernel.org # 3.16+ Fixes: fc4adbff823f7 ("btrfs: Drop EXTENT_UPTODATE check in hole punching and direct locking") Reviewed-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 17cbe9306faf..3fc3e10594a4 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7483,8 +7483,8 @@ bool btrfs_page_exists_in_range(struct inode *inode, loff_t start, loff_t end) int found = false; void **pagep = NULL; struct page *page = NULL; - int start_idx; - int end_idx; + unsigned long start_idx; + unsigned long end_idx; start_idx = start >> PAGE_SHIFT; From 896533a7da929136d0432713f02a3edffece2826 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Wed, 17 May 2017 09:49:37 -0400 Subject: [PATCH 0316/1065] btrfs: fix memory leak in update_space_info failure path If we fail to add the space_info kobject, we'll leak the memory for the percpu counter. Fixes: 6ab0a2029c (btrfs: publish allocation data in sysfs) Cc: # v3.14+ Signed-off-by: Jeff Mahoney Reviewed-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/extent-tree.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index e390451c72e6..27ca5b81ed22 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3993,6 +3993,7 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags, info->space_info_kobj, "%s", alloc_name(found->flags)); if (ret) { + percpu_counter_destroy(&found->total_bytes_pinned); kfree(found); return ret; } From a9b3311ef36b670909ea4443f306c8318082c8f0 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Wed, 17 May 2017 11:38:34 -0400 Subject: [PATCH 0317/1065] btrfs: fix race with relocation recovery and fs_root setup If we have to recover relocation during mount, we'll ultimately have to evict the orphan inode. That goes through the reservation dance, where priority_reclaim_metadata_space and flush_space expect fs_info->fs_root to be valid. That's the next thing to be set up during mount, so we crash, almost always in flush_space trying to join the transaction but priority_reclaim_metadata_space is possible as well. This call path has been problematic in the past WRT whether ->fs_root is valid yet. Commit 957780eb278 (Btrfs: introduce ticketed enospc infrastructure) added new users that are called in the direct path instead of the async path that had already been worked around. The thing is that we don't actually need the fs_root, specifically, for anything. We either use it to determine whether the root is the chunk_root for use in choosing an allocation profile or as a root to pass btrfs_join_transaction before immediately committing it. Anything that isn't the chunk root works in the former case and any root works in the latter. A simple fix is to use a root we know will always be there: the extent_root. Cc: # v4.8+ Fixes: 957780eb278 (Btrfs: introduce ticketed enospc infrastructure) Signed-off-by: Jeff Mahoney Reviewed-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/extent-tree.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 27ca5b81ed22..33d979e9ea2a 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4845,7 +4845,7 @@ static int may_commit_transaction(struct btrfs_fs_info *fs_info, spin_unlock(&delayed_rsv->lock); commit: - trans = btrfs_join_transaction(fs_info->fs_root); + trans = btrfs_join_transaction(fs_info->extent_root); if (IS_ERR(trans)) return -ENOSPC; @@ -4863,7 +4863,7 @@ static int flush_space(struct btrfs_fs_info *fs_info, struct btrfs_space_info *space_info, u64 num_bytes, u64 orig_bytes, int state) { - struct btrfs_root *root = fs_info->fs_root; + struct btrfs_root *root = fs_info->extent_root; struct btrfs_trans_handle *trans; int nr; int ret = 0; @@ -5063,7 +5063,7 @@ static void priority_reclaim_metadata_space(struct btrfs_fs_info *fs_info, int flush_state = FLUSH_DELAYED_ITEMS_NR; spin_lock(&space_info->lock); - to_reclaim = btrfs_calc_reclaim_metadata_size(fs_info->fs_root, + to_reclaim = btrfs_calc_reclaim_metadata_size(fs_info->extent_root, space_info); if (!to_reclaim) { spin_unlock(&space_info->lock); From 5ea6d691aac6c93b790f0905e3460d44cc4c449b Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Thu, 1 Jun 2017 16:18:10 +0800 Subject: [PATCH 0318/1065] qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M The driver may sleep under a write spin lock, and the function call path is: qlcnic_82xx_hw_write_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range qlcnic_82xx_hw_read_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range To fix it, the usleep_range is replaced with udelay. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 838cc0ceafd8..7848cf04b29a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -341,7 +341,7 @@ qlcnic_pcie_sem_lock(struct qlcnic_adapter *adapter, int sem, u32 id_reg) } return -EIO; } - usleep_range(1000, 1500); + udelay(1200); } if (id_reg) From 7212462fa6fdae61f7f40a4ead048def45bb23cb Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 1 Jun 2017 10:00:07 +0200 Subject: [PATCH 0319/1065] netlink: don't send unknown nsid The NETLINK_F_LISTEN_ALL_NSID otion enables to listen all netns that have a nsid assigned into the netns where the netlink socket is opened. The nsid is sent as metadata to userland, but the existence of this nsid is checked only for netns that are different from the socket netns. Thus, if no nsid is assigned to the socket netns, NETNSA_NSID_NOT_ASSIGNED is reported to the userland. This value is confusing and useless. After this patch, only valid nsid are sent to userland. Reported-by: Flavio Leitner Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index ee841f00a6ec..7586d446d7dc 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -62,6 +62,7 @@ #include #include #include +#include #include #include @@ -1415,7 +1416,8 @@ static void do_one_broadcast(struct sock *sk, goto out; } NETLINK_CB(p->skb2).nsid = peernet2id(sock_net(sk), p->net); - NETLINK_CB(p->skb2).nsid_is_set = true; + if (NETLINK_CB(p->skb2).nsid != NETNSA_NSID_NOT_ASSIGNED) + NETLINK_CB(p->skb2).nsid_is_set = true; val = netlink_broadcast_deliver(sk, p->skb2); if (val < 0) { netlink_overrun(sk); From 2b7ea64f94347b72235e563fedd6ef1ead4d11ec Mon Sep 17 00:00:00 2001 From: Ganesh Goudar Date: Thu, 1 Jun 2017 17:11:30 +0530 Subject: [PATCH 0320/1065] cxgb4: update latest firmware version supported Change t4fw_version.h to update latest firmware version number to 1.16.45.0. Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h index 3549d3876278..f2d623a7aee0 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h @@ -37,7 +37,7 @@ #define T4FW_VERSION_MAJOR 0x01 #define T4FW_VERSION_MINOR 0x10 -#define T4FW_VERSION_MICRO 0x2B +#define T4FW_VERSION_MICRO 0x2D #define T4FW_VERSION_BUILD 0x00 #define T4FW_MIN_VERSION_MAJOR 0x01 @@ -46,7 +46,7 @@ #define T5FW_VERSION_MAJOR 0x01 #define T5FW_VERSION_MINOR 0x10 -#define T5FW_VERSION_MICRO 0x2B +#define T5FW_VERSION_MICRO 0x2D #define T5FW_VERSION_BUILD 0x00 #define T5FW_MIN_VERSION_MAJOR 0x00 @@ -55,7 +55,7 @@ #define T6FW_VERSION_MAJOR 0x01 #define T6FW_VERSION_MINOR 0x10 -#define T6FW_VERSION_MICRO 0x2B +#define T6FW_VERSION_MICRO 0x2D #define T6FW_VERSION_BUILD 0x00 #define T6FW_MIN_VERSION_MAJOR 0x00 From 3968d38917eb9bd0cd391265f6c9c538d9b33ffa Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Thu, 1 Jun 2017 15:57:56 +0300 Subject: [PATCH 0321/1065] bnx2x: Fix Multi-Cos Apparently multi-cos isn't working for bnx2x quite some time - driver implements ndo_select_queue() to allow queue-selection for FCoE, but the regular L2 flow would cause it to modulo the fallback's result by the number of queues. The fallback would return a queue matching the needed tc [via __skb_tx_hash()], but since the modulo is by the number of TSS queues where number of TCs is not accounted, transmission would always be done by a queue configured into using TC0. Fixes: ada7c19e6d27 ("bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hash") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index eccb3d1b6abb..5f49334dcad5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1926,7 +1926,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb, } /* select a non-FCoE queue */ - return fallback(dev, skb) % BNX2X_NUM_ETH_QUEUES(bp); + return fallback(dev, skb) % (BNX2X_NUM_ETH_QUEUES(bp) * bp->max_cos); } void bnx2x_set_num_queues(struct bnx2x *bp) From aeb073241fe7a2b932e04e20c60e47718332877f Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Thu, 1 Jun 2017 18:07:55 +0300 Subject: [PATCH 0322/1065] net: bridge: start hello timer only if device is up When the transition of NO_STP -> KERNEL_STP was fixed by always calling mod_timer in br_stp_start, it introduced a new regression which causes the timer to be armed even when the bridge is down, and since we stop the timers in its ndo_stop() function, they never get disabled if the device is destroyed before it's upped. To reproduce: $ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on; ip l del br0; done; CC: Xin Long CC: Ivan Vecera CC: Sebastian Ott Reported-by: Sebastian Ott Fixes: 6d18c732b95c ("bridge: start hello_timer when enabling KERNEL_STP in br_stp_start") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/bridge/br_stp_if.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c index 0db8102995a5..6f12a5271219 100644 --- a/net/bridge/br_stp_if.c +++ b/net/bridge/br_stp_if.c @@ -179,7 +179,8 @@ static void br_stp_start(struct net_bridge *br) br_debug(br, "using kernel STP\n"); /* To start timers on any ports left in blocking */ - mod_timer(&br->hello_timer, jiffies + br->hello_time); + if (br->dev->flags & IFF_UP) + mod_timer(&br->hello_timer, jiffies + br->hello_time); br_port_state_selection(br); } From 0fde7ad71ee371ede73b3f326e58f9e8d102feb6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Jun 2017 09:42:46 -0700 Subject: [PATCH 0323/1065] sparc64: Fix build warnings with gcc 7. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit arch/sparc/kernel/ds.c: In function ‘register_services’: arch/sparc/kernel/ds.c:912:3: error: ‘strcpy’: writing at least 1 byte into a region of size 0 overflows the destination Reported-by: Anatoly Pugachev Signed-off-by: David S. Miller --- arch/sparc/kernel/ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index b542cc7c8d94..f87265afb175 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -909,7 +909,7 @@ static int register_services(struct ds_info *dp) pbuf.req.handle = cp->handle; pbuf.req.major = 1; pbuf.req.minor = 0; - strcpy(pbuf.req.svc_id, cp->service_id); + strcpy(pbuf.id_buf, cp->service_id); err = __ds_send(lp, &pbuf, msg_len); if (err > 0) From b13bbeee5ee606cfb57ddcf47e66802f9aa7273e Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 1 Jun 2017 09:29:59 -0500 Subject: [PATCH 0324/1065] perf annotate: Fix branch instruction with multiple operands MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'perf annotate' is dropping the cr* fields from branch instructions. Fix it by adding support to display branch instructions having multiple operands. Power Arch objdump of int_sqrt: 20.36 | c0000000004d2694: subf r10,r10,r3 | c0000000004d2698: v bgt cr6,c0000000004d26a0 1.82 | c0000000004d269c: mr r3,r10 29.18 | c0000000004d26a0: mr r10,r8 | c0000000004d26a4: v bgt cr7,c0000000004d26ac | c0000000004d26a8: mr r10,r7 Power Arch Before Patch: 20.36 | subf r10,r10,r3 | v bgt 40 1.82 | mr r3,r10 29.18 | 40: mr r10,r8 | v bgt 4c | mr r10,r7 Power Arch After patch: 20.36 | subf r10,r10,r3 | v bgt cr6,40 1.82 | mr r3,r10 29.18 | 40: mr r10,r8 | v bgt cr7,4c | mr r10,r7 Also support AArch64 conditional branch instructions, which can have up to three operands: Aarch64 Non-simplified (raw objdump) view: │ffff0000083cd11c: ↑ cbz w0, ffff0000083cd100 Tested-by: Ravi Bangoria Reported-by: Anton Blanchard Reported-by: Robin Murphy Signed-off-by: Kim Phillips Cc: Alexander Shishkin Cc: Christian Borntraeger Cc: Mark Rutland Cc: Peter Zijlstra Cc: Taeung Song Link: http://lkml.kernel.org/r/20170601092959.f60d98912e8a1b66fd1e4c0e@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/annotate.c | 33 ++++++++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-) diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c index 07d5608a675f..1367d7e35242 100644 --- a/tools/perf/util/annotate.c +++ b/tools/perf/util/annotate.c @@ -239,10 +239,20 @@ static int jump__parse(struct arch *arch __maybe_unused, struct ins_operands *op const char *s = strchr(ops->raw, '+'); const char *c = strchr(ops->raw, ','); - if (c++ != NULL) + /* + * skip over possible up to 2 operands to get to address, e.g.: + * tbnz w0, #26, ffff0000083cd190 + */ + if (c++ != NULL) { ops->target.addr = strtoull(c, NULL, 16); - else + if (!ops->target.addr) { + c = strchr(c, ','); + if (c++ != NULL) + ops->target.addr = strtoull(c, NULL, 16); + } + } else { ops->target.addr = strtoull(ops->raw, NULL, 16); + } if (s++ != NULL) { ops->target.offset = strtoull(s, NULL, 16); @@ -257,10 +267,27 @@ static int jump__parse(struct arch *arch __maybe_unused, struct ins_operands *op static int jump__scnprintf(struct ins *ins, char *bf, size_t size, struct ins_operands *ops) { + const char *c = strchr(ops->raw, ','); + if (!ops->target.addr || ops->target.offset < 0) return ins__raw_scnprintf(ins, bf, size, ops); - return scnprintf(bf, size, "%-6.6s %" PRIx64, ins->name, ops->target.offset); + if (c != NULL) { + const char *c2 = strchr(c + 1, ','); + + /* check for 3-op insn */ + if (c2 != NULL) + c = c2; + c++; + + /* mirror arch objdump's space-after-comma style */ + if (*c == ' ') + c++; + } + + return scnprintf(bf, size, "%-6.6s %.*s%" PRIx64, + ins->name, c ? c - ops->raw : 0, ops->raw, + ops->target.offset); } static struct ins_ops jump_ops = { From 35cf2845563c1aaa01d27bd34d64795c4ae72700 Mon Sep 17 00:00:00 2001 From: Lance Richardson Date: Mon, 29 May 2017 13:25:57 -0400 Subject: [PATCH 0325/1065] vxlan: eliminate cached dst leak After commit 0c1d70af924b ("net: use dst_cache for vxlan device"), cached dst entries could be leaked when more than one remote was present for a given vxlan_fdb entry, causing subsequent netns operations to block indefinitely and "unregister_netdevice: waiting for lo to become free." messages to appear in the kernel log. Fix by properly releasing cached dst and freeing resources in this case. Fixes: 0c1d70af924b ("net: use dst_cache for vxlan device") Signed-off-by: Lance Richardson Acked-by: Paolo Abeni Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 328b4712683c..5c1d69e37870 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -740,6 +740,22 @@ static void vxlan_fdb_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f) call_rcu(&f->rcu, vxlan_fdb_free); } +static void vxlan_dst_free(struct rcu_head *head) +{ + struct vxlan_rdst *rd = container_of(head, struct vxlan_rdst, rcu); + + dst_cache_destroy(&rd->dst_cache); + kfree(rd); +} + +static void vxlan_fdb_dst_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f, + struct vxlan_rdst *rd) +{ + list_del_rcu(&rd->list); + vxlan_fdb_notify(vxlan, f, rd, RTM_DELNEIGH); + call_rcu(&rd->rcu, vxlan_dst_free); +} + static int vxlan_fdb_parse(struct nlattr *tb[], struct vxlan_dev *vxlan, union vxlan_addr *ip, __be16 *port, __be32 *src_vni, __be32 *vni, u32 *ifindex) @@ -864,9 +880,7 @@ static int __vxlan_fdb_delete(struct vxlan_dev *vxlan, * otherwise destroy the fdb entry */ if (rd && !list_is_singular(&f->remotes)) { - list_del_rcu(&rd->list); - vxlan_fdb_notify(vxlan, f, rd, RTM_DELNEIGH); - kfree_rcu(rd, rcu); + vxlan_fdb_dst_destroy(vxlan, f, rd); goto out; } From 93818da5eed63fbc17b64080406ea53b86b23309 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Wed, 31 May 2017 15:08:25 +0800 Subject: [PATCH 0326/1065] mISDN: Fix a sleep-in-atomic bug The driver may sleep under a read spin lock, and the function call path is: send_socklist (acquire the lock by read_lock) skb_copy(GFP_KERNEL) --> may sleep To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/isdn/mISDN/stack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c index 8b7faea2ddf8..422dced7c90a 100644 --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -75,7 +75,7 @@ send_socklist(struct mISDN_sock_list *sl, struct sk_buff *skb) if (sk->sk_state != MISDN_BOUND) continue; if (!cskb) - cskb = skb_copy(skb, GFP_KERNEL); + cskb = skb_copy(skb, GFP_ATOMIC); if (!cskb) { printk(KERN_WARNING "%s no skb\n", __func__); break; From e6f4292ae0a1e73fae26ced57de13a48f71ad1fa Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Wed, 31 May 2017 13:29:29 +0300 Subject: [PATCH 0327/1065] ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy properties Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same register values can be set through the micrel phy driver by using dts properties. This seems preferable and allows cleanly fixing suspend/resume. Signed-off-by: Leonard Crestez Reviewed-by: Fabio Estevam Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- arch/arm/boot/dts/imx6ul-14x14-evk.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index f18e1f1d0ce2..d2be8aa3370b 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -120,10 +120,16 @@ ethphy0: ethernet-phy@2 { reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; }; ethphy1: ethernet-phy@1 { reg = <1>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; }; }; }; From 79e498a9c7da0737829ff864aae44df434105676 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Wed, 31 May 2017 13:29:30 +0300 Subject: [PATCH 0328/1065] net: phy: micrel: Restore led_mode and clk_sel on resume These bits seem to be lost after a suspend/resume cycle so just set them again. Do this by splitting the handling of these bits into a function that is also called on resume. This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards. Signed-off-by: Leonard Crestez Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 42 ++++++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 14 deletions(-) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 6a5fd18f062c..b9252b8d81ff 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -268,11 +268,31 @@ out: return ret; } +/* Some config bits need to be set again on resume, handle them here. */ +static int kszphy_config_reset(struct phy_device *phydev) +{ + struct kszphy_priv *priv = phydev->priv; + int ret; + + if (priv->rmii_ref_clk_sel) { + ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val); + if (ret) { + phydev_err(phydev, + "failed to set rmii reference clock\n"); + return ret; + } + } + + if (priv->led_mode >= 0) + kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode); + + return 0; +} + static int kszphy_config_init(struct phy_device *phydev) { struct kszphy_priv *priv = phydev->priv; const struct kszphy_type *type; - int ret; if (!priv) return 0; @@ -285,19 +305,7 @@ static int kszphy_config_init(struct phy_device *phydev) if (type->has_nand_tree_disable) kszphy_nand_tree_disable(phydev); - if (priv->rmii_ref_clk_sel) { - ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val); - if (ret) { - phydev_err(phydev, - "failed to set rmii reference clock\n"); - return ret; - } - } - - if (priv->led_mode >= 0) - kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode); - - return 0; + return kszphy_config_reset(phydev); } static int ksz8041_config_init(struct phy_device *phydev) @@ -700,8 +708,14 @@ static int kszphy_suspend(struct phy_device *phydev) static int kszphy_resume(struct phy_device *phydev) { + int ret; + genphy_resume(phydev); + ret = kszphy_config_reset(phydev); + if (ret) + return ret; + /* Enable PHY Interrupts */ if (phy_interrupt_is_valid(phydev)) { phydev->interrupts = PHY_INTERRUPT_ENABLED; From b425e50492583b10cceb388af36ef0bd3bdf842a Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 31 May 2017 14:43:45 -0700 Subject: [PATCH 0329/1065] block: Avoid that blk_exit_rl() triggers a use-after-free Since the introduction of .init_rq_fn() and .exit_rq_fn() it is essential that the memory allocated for struct request_queue stays around until all blk_exit_rl() calls have finished. Hence make blk_init_rl() take a reference on struct request_queue. This patch fixes the following crash: general protection fault: 0000 [#2] SMP CPU: 3 PID: 28 Comm: ksoftirqd/3 Tainted: G D 4.12.0-rc2-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 task: ffff88013a108040 task.stack: ffffc9000071c000 RIP: 0010:free_request_size+0x1a/0x30 RSP: 0018:ffffc9000071fd38 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: ffff880067362a88 RCX: 0000000000000003 RDX: ffff880067464178 RSI: ffff880067362a88 RDI: ffff880135ea4418 RBP: ffffc9000071fd40 R08: 0000000000000000 R09: 0000000100180009 R10: ffffc9000071fd38 R11: ffffffff81110800 R12: ffff88006752d3d8 R13: ffff88006752d3d8 R14: ffff88013a108040 R15: 000000000000000a FS: 0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa8ec1edb00 CR3: 0000000138ee8000 CR4: 00000000001406e0 Call Trace: mempool_destroy.part.10+0x21/0x40 mempool_destroy+0xe/0x10 blk_exit_rl+0x12/0x20 blkg_free+0x4d/0xa0 __blkg_release_rcu+0x59/0x170 rcu_process_callbacks+0x260/0x4e0 __do_softirq+0x116/0x250 smpboot_thread_fn+0x123/0x1e0 kthread+0x109/0x140 ret_from_fork+0x31/0x40 Fixes: commit e9c787e65c0c ("scsi: allocate scsi_cmnd structures as part of struct request") Signed-off-by: Bart Van Assche Acked-by: Tejun Heo Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Cc: Jan Kara Cc: # v4.11+ Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 2 +- block/blk-core.c | 10 ++++++++-- block/blk-sysfs.c | 2 +- block/blk.h | 2 +- 4 files changed, 11 insertions(+), 5 deletions(-) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 7c2947128f58..0480892e97e5 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -74,7 +74,7 @@ static void blkg_free(struct blkcg_gq *blkg) blkcg_policy[i]->pd_free_fn(blkg->pd[i]); if (blkg->blkcg != &blkcg_root) - blk_exit_rl(&blkg->rl); + blk_exit_rl(blkg->q, &blkg->rl); blkg_rwstat_exit(&blkg->stat_ios); blkg_rwstat_exit(&blkg->stat_bytes); diff --git a/block/blk-core.c b/block/blk-core.c index c7068520794b..a7421b772d0e 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -648,13 +648,19 @@ int blk_init_rl(struct request_list *rl, struct request_queue *q, if (!rl->rq_pool) return -ENOMEM; + if (rl != &q->root_rl) + WARN_ON_ONCE(!blk_get_queue(q)); + return 0; } -void blk_exit_rl(struct request_list *rl) +void blk_exit_rl(struct request_queue *q, struct request_list *rl) { - if (rl->rq_pool) + if (rl->rq_pool) { mempool_destroy(rl->rq_pool); + if (rl != &q->root_rl) + blk_put_queue(q); + } } struct request_queue *blk_alloc_queue(gfp_t gfp_mask) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 712b018e9f54..283da7fbe034 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -809,7 +809,7 @@ static void blk_release_queue(struct kobject *kobj) blk_free_queue_stats(q->stats); - blk_exit_rl(&q->root_rl); + blk_exit_rl(q, &q->root_rl); if (q->queue_tags) __blk_queue_free_tags(q); diff --git a/block/blk.h b/block/blk.h index 2ed70228e44f..83c8e1100525 100644 --- a/block/blk.h +++ b/block/blk.h @@ -59,7 +59,7 @@ void blk_free_flush_queue(struct blk_flush_queue *q); int blk_init_rl(struct request_list *rl, struct request_queue *q, gfp_t gfp_mask); -void blk_exit_rl(struct request_list *rl); +void blk_exit_rl(struct request_queue *q, struct request_list *rl); void blk_rq_bio_prep(struct request_queue *q, struct request *rq, struct bio *bio); void blk_queue_bypass_start(struct request_queue *q); From e165bc02a02c70e40d5c811c705ba269aeca0497 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 1 Jun 2017 21:26:03 +0200 Subject: [PATCH 0330/1065] mac80211: fix dropped counter in multiqueue RX In the commit enabling per-CPU station statistics, I inadvertedly copy-pasted some code to update rx_packets and forgot to change it to update rx_dropped_misc. Fix that. This addresses https://bugzilla.kernel.org/show_bug.cgi?id=195953. Fixes: c9c5962b56c1 ("mac80211: enable collecting station statistics per-CPU") Reported-by: Petru-Florin Mihancea Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 7cdf7a835bb0..403e3cc58b57 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -2155,7 +2155,7 @@ void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) struct ieee80211_sta_rx_stats *cpurxs; cpurxs = per_cpu_ptr(sta->pcpu_rx_stats, cpu); - sinfo->rx_packets += cpurxs->dropped; + sinfo->rx_dropped_misc += cpurxs->dropped; } } From 5a27fec21b70c2c41efbfe30a0fbb0f005b9f7e5 Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Fri, 5 May 2017 12:05:16 -0500 Subject: [PATCH 0331/1065] RDMA/i40iw: Don't set 0-length FULPDU RTR indication control flag Don't set control flag for 0-length FULPDU (Send) RTR indication in the enhanced MPA Request/Reply frames, because it isn't supported. Signed-off-by: Tatyana Nikolova Signed-off-by: Henry Orosco Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_cm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c index f3bc01bce483..e8e864fc1883 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_cm.c +++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c @@ -784,7 +784,6 @@ static void i40iw_build_mpa_v2(struct i40iw_cm_node *cm_node, } ctrl_ird |= IETF_PEER_TO_PEER; - ctrl_ird |= IETF_FLPDU_ZERO_LEN; switch (mpa_key) { case MPA_KEY_REQUEST: From b117f4796306a750ec1ffb928acc5f55bdb1fc7b Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Fri, 5 May 2017 12:05:17 -0500 Subject: [PATCH 0332/1065] RDMA/i40iw: ACK MPA Reject frame Explicitly ACK the MPA Reject frame so the peer does not retransmit the frame. Signed-off-by: Tatyana Nikolova Signed-off-by: Henry Orosco Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c index e8e864fc1883..6ae98aa7f74e 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_cm.c +++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c @@ -2445,8 +2445,8 @@ static void i40iw_handle_rcv_mpa(struct i40iw_cm_node *cm_node, } else { type = I40IW_CM_EVENT_CONNECTED; cm_node->state = I40IW_CM_STATE_OFFLOADED; - i40iw_send_ack(cm_node); } + i40iw_send_ack(cm_node); break; default: pr_err("%s wrong cm_node state =%d\n", __func__, cm_node->state); From c0c643e16f9b00332cbbf3954556652dfa4ed5a3 Mon Sep 17 00:00:00 2001 From: Mustafa Ismail Date: Wed, 10 May 2017 23:32:14 -0500 Subject: [PATCH 0333/1065] RDMA/i40iw: Fix device initialization error path Some error paths in i40iw_initialize_dev are doing additional and unnecessary work before exiting. Correctly free resources allocated prior to error and return with correct status code. Signed-off-by: Mustafa Ismail Signed-off-by: Henry Orosco Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_main.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/hw/i40iw/i40iw_main.c b/drivers/infiniband/hw/i40iw/i40iw_main.c index 2728af3103ce..a3f18a22f5ed 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_main.c +++ b/drivers/infiniband/hw/i40iw/i40iw_main.c @@ -1319,13 +1319,13 @@ static enum i40iw_status_code i40iw_initialize_dev(struct i40iw_device *iwdev, status = i40iw_obj_aligned_mem(iwdev, &mem, I40IW_QUERY_FPM_BUF_SIZE, I40IW_FPM_QUERY_BUF_ALIGNMENT_MASK); if (status) - goto exit; + goto error; info.fpm_query_buf_pa = mem.pa; info.fpm_query_buf = mem.va; status = i40iw_obj_aligned_mem(iwdev, &mem, I40IW_COMMIT_FPM_BUF_SIZE, I40IW_FPM_COMMIT_BUF_ALIGNMENT_MASK); if (status) - goto exit; + goto error; info.fpm_commit_buf_pa = mem.pa; info.fpm_commit_buf = mem.va; info.hmc_fn_id = ldev->fid; @@ -1347,11 +1347,9 @@ static enum i40iw_status_code i40iw_initialize_dev(struct i40iw_device *iwdev, info.exception_lan_queue = 1; info.vchnl_send = i40iw_virtchnl_send; status = i40iw_device_init(&iwdev->sc_dev, &info); -exit: - if (status) { - kfree(iwdev->hmc_info_mem); - iwdev->hmc_info_mem = NULL; - } + + if (status) + goto error; memset(&vsi_info, 0, sizeof(vsi_info)); vsi_info.dev = &iwdev->sc_dev; vsi_info.back_vsi = (void *)iwdev; @@ -1362,11 +1360,19 @@ exit: memset(&stats_info, 0, sizeof(stats_info)); stats_info.fcn_id = ldev->fid; stats_info.pestat = kzalloc(sizeof(*stats_info.pestat), GFP_KERNEL); + if (!stats_info.pestat) { + status = I40IW_ERR_NO_MEMORY; + goto error; + } stats_info.stats_initialize = true; if (stats_info.pestat) i40iw_vsi_stats_init(&iwdev->vsi, &stats_info); } return status; +error: + kfree(iwdev->hmc_info_mem); + iwdev->hmc_info_mem = NULL; + return status; } /** From f300ba2d1ef1cb8411daa5e1ae44acfa7b88236c Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Fri, 19 May 2017 16:14:02 -0500 Subject: [PATCH 0334/1065] RDMA/i40iw: Remove MSS change support MSS change on active QPs is not supported. Store new MSS value for new QPs only. Remove code to modify MSS on the fly. This also resolves a crash on QP modify to QP 0. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: i40iw_sc_qp_modify+0x22/0x280 [i40iw] Oops: 0000 [#1] SMP KASAN CPU: 2 PID: 1236 Comm: kworker/u16:4 Not tainted 4.12.0-rc1 #5 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014 Workqueue: l2params i40iw_l2params_worker [i40iw] task: ffff88070f5a9b40 task.stack: ffff88070f5a0000 RIP: 0010:i40iw_sc_qp_modify+0x22/0x280 [i40iw] ... Call Trace: i40iw_exec_cqp_cmd+0x2ce/0x410 [i40iw] ? _raw_spin_lock_irqsave+0x6f/0x80 ? i40iw_process_cqp_cmd+0x1d/0x80 [i40iw] i40iw_process_cqp_cmd+0x7c/0x80 [i40iw] i40iw_handle_cqp_op+0x2f/0x200 [i40iw] ? trace_hardirqs_off+0xd/0x10 ? _raw_spin_unlock_irqrestore+0x46/0x50 i40iw_hw_modify_qp+0x5e/0x90 [i40iw] i40iw_qp_mss_modify+0x52/0x60 [i40iw] i40iw_change_l2params+0x145/0x160 [i40iw] i40iw_l2params_worker+0x1f/0x40 [i40iw] process_one_work+0x1f5/0x650 ? process_one_work+0x161/0x650 worker_thread+0x48/0x3b0 kthread+0x112/0x150 ? process_one_work+0x650/0x650 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x2e/0x40 Code: 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 41 89 cd 41 54 49 89 fc 53 48 89 f3 48 89 d6 48 83 ec 08 48 8b 87 10 01 00 00 <48> 8b 40 08 4c 8b b0 40 04 00 00 4c 89 f7 e8 1b e5 ff ff 48 85 RIP: i40iw_sc_qp_modify+0x22/0x280 [i40iw] RSP: ffff88070f5a7c28 CR2: 0000000000000008 ---[ end trace 77a405931e296060 ]--- Reported-by: Stefan Assmann Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_ctrl.c | 12 +----------- drivers/infiniband/hw/i40iw/i40iw_osdep.h | 1 - drivers/infiniband/hw/i40iw/i40iw_type.h | 2 -- drivers/infiniband/hw/i40iw/i40iw_utils.c | 17 ----------------- 4 files changed, 1 insertion(+), 31 deletions(-) diff --git a/drivers/infiniband/hw/i40iw/i40iw_ctrl.c b/drivers/infiniband/hw/i40iw/i40iw_ctrl.c index f82483b3d1e7..a027e2072477 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_ctrl.c +++ b/drivers/infiniband/hw/i40iw/i40iw_ctrl.c @@ -285,28 +285,20 @@ void i40iw_change_l2params(struct i40iw_sc_vsi *vsi, struct i40iw_l2params *l2pa struct i40iw_sc_dev *dev = vsi->dev; struct i40iw_sc_qp *qp = NULL; bool qs_handle_change = false; - bool mss_change = false; unsigned long flags; u16 qs_handle; int i; - if (vsi->mss != l2params->mss) { - mss_change = true; - vsi->mss = l2params->mss; - } + vsi->mss = l2params->mss; i40iw_fill_qos_list(l2params->qs_handle_list); for (i = 0; i < I40IW_MAX_USER_PRIORITY; i++) { qs_handle = l2params->qs_handle_list[i]; if (vsi->qos[i].qs_handle != qs_handle) qs_handle_change = true; - else if (!mss_change) - continue; /* no MSS nor qs handle change */ spin_lock_irqsave(&vsi->qos[i].lock, flags); qp = i40iw_get_qp(&vsi->qos[i].qplist, qp); while (qp) { - if (mss_change) - i40iw_qp_mss_modify(dev, qp); if (qs_handle_change) { qp->qs_handle = qs_handle; /* issue cqp suspend command */ @@ -2395,7 +2387,6 @@ static enum i40iw_status_code i40iw_sc_qp_modify( set_64bit_val(wqe, 8, - LS_64(info->new_mss, I40IW_CQPSQ_QP_NEWMSS) | LS_64(term_len, I40IW_CQPSQ_QP_TERMLEN)); set_64bit_val(wqe, 16, qp->hw_host_ctx_pa); @@ -2410,7 +2401,6 @@ static enum i40iw_status_code i40iw_sc_qp_modify( LS_64(info->cq_num_valid, I40IW_CQPSQ_QP_CQNUMVALID) | LS_64(info->force_loopback, I40IW_CQPSQ_QP_FORCELOOPBACK) | LS_64(qp->qp_type, I40IW_CQPSQ_QP_QPTYPE) | - LS_64(info->mss_change, I40IW_CQPSQ_QP_MSSCHANGE) | LS_64(info->static_rsrc, I40IW_CQPSQ_QP_STATRSRC) | LS_64(info->remove_hash_idx, I40IW_CQPSQ_QP_REMOVEHASHENTRY) | LS_64(term_actions, I40IW_CQPSQ_QP_TERMACT) | diff --git a/drivers/infiniband/hw/i40iw/i40iw_osdep.h b/drivers/infiniband/hw/i40iw/i40iw_osdep.h index aa66c1c63dfa..f27be3e7830b 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_osdep.h +++ b/drivers/infiniband/hw/i40iw/i40iw_osdep.h @@ -199,7 +199,6 @@ void i40iw_cqp_spawn_worker(struct i40iw_sc_dev *dev, struct i40iw_virtchnl_work_info *work_info, u32 iw_vf_idx); void *i40iw_remove_head(struct list_head *list); void i40iw_qp_suspend_resume(struct i40iw_sc_dev *dev, struct i40iw_sc_qp *qp, bool suspend); -void i40iw_qp_mss_modify(struct i40iw_sc_dev *dev, struct i40iw_sc_qp *qp); void i40iw_term_modify_qp(struct i40iw_sc_qp *qp, u8 next_state, u8 term, u8 term_len); void i40iw_terminate_done(struct i40iw_sc_qp *qp, int timeout_occurred); diff --git a/drivers/infiniband/hw/i40iw/i40iw_type.h b/drivers/infiniband/hw/i40iw/i40iw_type.h index 7b76259752b0..959ec81fba99 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_type.h +++ b/drivers/infiniband/hw/i40iw/i40iw_type.h @@ -541,7 +541,6 @@ struct i40iw_create_qp_info { struct i40iw_modify_qp_info { u64 rx_win0; u64 rx_win1; - u16 new_mss; u8 next_iwarp_state; u8 termlen; bool ord_valid; @@ -554,7 +553,6 @@ struct i40iw_modify_qp_info { bool dont_send_term; bool dont_send_fin; bool cached_var_valid; - bool mss_change; bool force_loopback; }; diff --git a/drivers/infiniband/hw/i40iw/i40iw_utils.c b/drivers/infiniband/hw/i40iw/i40iw_utils.c index 409a3781e735..56d986924a4c 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_utils.c +++ b/drivers/infiniband/hw/i40iw/i40iw_utils.c @@ -756,23 +756,6 @@ void i40iw_qp_suspend_resume(struct i40iw_sc_dev *dev, struct i40iw_sc_qp *qp, b i40iw_pr_err("CQP-OP QP Suspend/Resume fail"); } -/** - * i40iw_qp_mss_modify - modify mss for qp - * @dev: hardware control device structure - * @qp: hardware control qp - */ -void i40iw_qp_mss_modify(struct i40iw_sc_dev *dev, struct i40iw_sc_qp *qp) -{ - struct i40iw_device *iwdev = (struct i40iw_device *)dev->back_dev; - struct i40iw_qp *iwqp = (struct i40iw_qp *)qp->back_qp; - struct i40iw_modify_qp_info info; - - memset(&info, 0, sizeof(info)); - info.mss_change = true; - info.new_mss = qp->vsi->mss; - i40iw_hw_modify_qp(iwdev, iwqp, &info, false); -} - /** * i40iw_term_modify_qp - modify qp for term message * @qp: hardware control qp From e80bd98d1ff011beec872a8ebbb73930507d6a13 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 18 May 2017 13:11:17 -0500 Subject: [PATCH 0335/1065] RDMA/i40iw: fix duplicated code for different branches Refactor code to avoid identical code for different branches. Addresses-Coverity-ID: 1357356 Reviewed-by: Yuval Shaia Signed-off-by: Gustavo A. R. Silva Acked-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_virtchnl.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/i40iw/i40iw_virtchnl.c b/drivers/infiniband/hw/i40iw/i40iw_virtchnl.c index f4d13683a403..48fd327f876b 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_virtchnl.c +++ b/drivers/infiniband/hw/i40iw/i40iw_virtchnl.c @@ -443,10 +443,7 @@ enum i40iw_status_code i40iw_vchnl_recv_pf(struct i40iw_sc_dev *dev, if (!dev->vchnl_up) return I40IW_ERR_NOT_READY; if (vchnl_msg->iw_op_code == I40IW_VCHNL_OP_GET_VER) { - if (vchnl_msg->iw_op_ver != I40IW_VCHNL_OP_GET_VER_V0) - vchnl_pf_send_get_ver_resp(dev, vf_id, vchnl_msg); - else - vchnl_pf_send_get_ver_resp(dev, vf_id, vchnl_msg); + vchnl_pf_send_get_ver_resp(dev, vf_id, vchnl_msg); return I40IW_SUCCESS; } for (iw_vf_idx = 0; iw_vf_idx < I40IW_MAX_PE_ENABLED_VF_COUNT; iw_vf_idx++) { From 0e5fc903513a652a2cf890a3d3b91c1779e16e97 Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Wed, 10 May 2017 16:46:39 -0500 Subject: [PATCH 0336/1065] RDMA/nes: Don't set 0-length FULPDU RTR indication control flag Don't set control flag for 0-length FULPDU (Send) RTR indication in the enhanced MPA Request/Reply frames, because it isn't supported. Signed-off-by: Tatyana Nikolova Signed-off-by: Doug Ledford --- drivers/infiniband/hw/nes/nes_cm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index fb983df7c157..06a55f6fb708 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -610,7 +610,6 @@ static void build_mpa_v2(struct nes_cm_node *cm_node, ctrl_ord = cm_node->ord_size & IETF_NO_IRD_ORD; } ctrl_ird |= IETF_PEER_TO_PEER; - ctrl_ird |= IETF_FLPDU_ZERO_LEN; switch (mpa_key) { case MPA_KEY_REQUEST: From f863de7de34025ee536cb3cc382bfc3cafaa9f0a Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Wed, 10 May 2017 16:46:40 -0500 Subject: [PATCH 0337/1065] RDMA/nes: ACK MPA Reply frame Explicitly ACK the MPA Reply frame so the peer does not retransmit the frame. Signed-off-by: Tatyana Nikolova Signed-off-by: Doug Ledford --- drivers/infiniband/hw/nes/nes_cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 06a55f6fb708..30b256a2c54e 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1825,7 +1825,7 @@ static void handle_rcv_mpa(struct nes_cm_node *cm_node, struct sk_buff *skb) type = NES_CM_EVENT_CONNECTED; cm_node->state = NES_CM_STATE_TSA; } - + send_ack(cm_node, NULL); break; default: WARN_ON(1); From 1dad0ebeea1cd890b8892523f736916e245b0aef Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Mon, 15 May 2017 06:40:39 +0000 Subject: [PATCH 0338/1065] RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers The patch 761e19a504af (RDMA/iw_cxgb4: Handle return value of c4iw_ofld_send() in abort_arp_failure()) from May 6, 2016 leads to the following static checker warning: drivers/infiniband/hw/cxgb4/cm.c:575 abort_arp_failure() warn: passing freed memory 'skb' Also fixes skb leak when l2t resolution fails Fixes: 761e19a504afa55 (RDMA/iw_cxgb4: Handle return value of c4iw_ofld_send() in abort_arp_failure()) Reported-by: Dan Carpenter Cc: Dan Carpenter Signed-off-by: Raju Rangoju Reviewed-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index b6fe45924c6e..06b110213e92 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -488,6 +488,7 @@ static int _put_ep_safe(struct c4iw_dev *dev, struct sk_buff *skb) ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *))); release_ep_resources(ep); + kfree_skb(skb); return 0; } @@ -498,6 +499,7 @@ static int _put_pass_ep_safe(struct c4iw_dev *dev, struct sk_buff *skb) ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *))); c4iw_put_ep(&ep->parent_ep->com); release_ep_resources(ep); + kfree_skb(skb); return 0; } @@ -569,11 +571,13 @@ static void abort_arp_failure(void *handle, struct sk_buff *skb) pr_debug("%s rdev %p\n", __func__, rdev); req->cmd = CPL_ABORT_NO_RST; + skb_get(skb); ret = c4iw_ofld_send(rdev, skb); if (ret) { __state_set(&ep->com, DEAD); queue_arp_failure_cpl(ep, skb, FAKE_CPL_PUT_EP_SAFE); - } + } else + kfree_skb(skb); } static int send_flowc(struct c4iw_ep *ep) From 4bbfabede50849f87b913a1fc07c02ecc96b6c57 Mon Sep 17 00:00:00 2001 From: Ganesh Goudar Date: Fri, 19 May 2017 14:48:42 +0530 Subject: [PATCH 0339/1065] RDMA/iw_cxgb4: calculate t4_eq_status_entries properly use egrstatuspagesize to calculate t4_eq_status_entries. Fixes: bb58d07964f2 ("cxgb4: Update IngPad and IngPack values") Reported-by: Logan Gunthorpe Signed-off-by: Potnuri Bharat Teja Signed-off-by: Ganesh Goudar Acked-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 329fb65e8fb0..f96a96dbcf1f 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -971,7 +971,7 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop) devp->rdev.lldi.sge_egrstatuspagesize); devp->rdev.hw_queue.t4_eq_status_entries = - devp->rdev.lldi.sge_ingpadboundary > 64 ? 2 : 1; + devp->rdev.lldi.sge_egrstatuspagesize / 64; devp->rdev.hw_queue.t4_max_eq_size = 65520; devp->rdev.hw_queue.t4_max_iq_size = 65520; devp->rdev.hw_queue.t4_max_rq_size = 8192 - From 98b80a2a73a26f0e259632da519ccedb0cf37617 Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Wed, 31 May 2017 12:06:58 +0530 Subject: [PATCH 0340/1065] RDMA/iw_cxgb4: fix the calculation of ipv6 header size Take care of ipv6 checks while computing header length for deducing mtu size of ipv6 servers. Due to the incorrect header length computation for ipv6 servers, wrong mss is reported to the peer (client). Signed-off-by: Raju Rangoju Signed-off-by: Ganesh Goudar Acked-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 06b110213e92..0910faf3587b 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -2521,7 +2521,8 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb) goto reject; } - hdrs = sizeof(struct iphdr) + sizeof(struct tcphdr) + + hdrs = ((iptype == 4) ? sizeof(struct iphdr) : sizeof(struct ipv6hdr)) + + sizeof(struct tcphdr) + ((enable_tcp_timestamps && req->tcpopt.tstamp) ? 12 : 0); if (peer_mss && child_ep->mtu > (peer_mss + hdrs)) child_ep->mtu = peer_mss + hdrs; From c4dd4b69f55abcc8dd079f8de55d9d8c2ddbefce Mon Sep 17 00:00:00 2001 From: "Steven L. Roberts" Date: Wed, 10 May 2017 10:54:12 -0500 Subject: [PATCH 0341/1065] RDMA/hfi1: fix array termination by appending NULL to attr array This fixes a kernel panic when loading the hfi driver as a dynamic module. Signed-off-by: Steven L Roberts Reviewed-by: Leon Romanovsky Acked-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/sysfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hfi1/sysfs.c b/drivers/infiniband/hw/hfi1/sysfs.c index 50d140d25e38..2f3bbcac1e34 100644 --- a/drivers/infiniband/hw/hfi1/sysfs.c +++ b/drivers/infiniband/hw/hfi1/sysfs.c @@ -196,7 +196,8 @@ static const struct sysfs_ops port_cc_sysfs_ops = { }; static struct attribute *port_cc_default_attributes[] = { - &cc_prescan_attr.attr + &cc_prescan_attr.attr, + NULL }; static struct kobj_type port_cc_ktype = { From e4785b0633574a607daaa04bf2fe43550055194f Mon Sep 17 00:00:00 2001 From: "Steven L. Roberts" Date: Wed, 10 May 2017 14:58:13 -0500 Subject: [PATCH 0342/1065] RDMA/hfi1: change PCI bar addr assignments to Linux API functions The Omni-Path adapter driver fails to load on the ppc64le platform due to invalid PCI setup. This patch makes the PCI configuration more robust and will fix 64 bit addressing for ppc64le. Signed-off-by: Steven L Roberts Acked-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/pcie.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c index 93faf86d54b6..6a9f6f9819e1 100644 --- a/drivers/infiniband/hw/hfi1/pcie.c +++ b/drivers/infiniband/hw/hfi1/pcie.c @@ -207,8 +207,8 @@ int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev) /* * Save BARs and command to rewrite after device reset. */ - dd->pcibar0 = addr; - dd->pcibar1 = addr >> 32; + pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0, &dd->pcibar0); + pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1, &dd->pcibar1); pci_read_config_dword(dd->pcidev, PCI_ROM_ADDRESS, &dd->pci_rom); pci_read_config_word(dd->pcidev, PCI_COMMAND, &dd->pci_command); pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL, &dd->pcie_devctl); From b3e6b4bdbb609762d8401ac4a959d590b4e4e3b8 Mon Sep 17 00:00:00 2001 From: "Byczkowski, Jakub" Date: Fri, 12 May 2017 09:01:37 -0700 Subject: [PATCH 0343/1065] RDMA/hfi1: Defer setting VL15 credits to link-up interrupt Keep VL15 credits at 0 during LNI, before link-up. Store VL15 credits value during verify cap interrupt and set in after link-up. This addresses an issue where VL15 MAD packets could be sent by one side of the link before the other side is ready to receive them. Reviewed-by: Mike Marciniszyn Reviewed-by: Dean Luick Reviewed-by: Dennis Dalessandro Signed-off-by: Jakub Byczkowski Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 67 +++++++++++++++------ drivers/infiniband/hw/hfi1/chip_registers.h | 2 + drivers/infiniband/hw/hfi1/hfi.h | 11 +++- drivers/infiniband/hw/hfi1/intr.c | 3 +- 4 files changed, 64 insertions(+), 19 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 5d6b1eeaa9a0..2ba00b89df6a 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -6312,25 +6312,38 @@ static void handle_8051_request(struct hfi1_pportdata *ppd) } } -static void write_global_credit(struct hfi1_devdata *dd, - u8 vau, u16 total, u16 shared) +/* + * Set up allocation unit vaulue. + */ +void set_up_vau(struct hfi1_devdata *dd, u8 vau) { - write_csr(dd, SEND_CM_GLOBAL_CREDIT, - ((u64)total << - SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SHIFT) | - ((u64)shared << - SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SHIFT) | - ((u64)vau << SEND_CM_GLOBAL_CREDIT_AU_SHIFT)); + u64 reg = read_csr(dd, SEND_CM_GLOBAL_CREDIT); + + /* do not modify other values in the register */ + reg &= ~SEND_CM_GLOBAL_CREDIT_AU_SMASK; + reg |= (u64)vau << SEND_CM_GLOBAL_CREDIT_AU_SHIFT; + write_csr(dd, SEND_CM_GLOBAL_CREDIT, reg); } /* * Set up initial VL15 credits of the remote. Assumes the rest of - * the CM credit registers are zero from a previous global or credit reset . + * the CM credit registers are zero from a previous global or credit reset. + * Shared limit for VL15 will always be 0. */ -void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf) +void set_up_vl15(struct hfi1_devdata *dd, u16 vl15buf) { - /* leave shared count at zero for both global and VL15 */ - write_global_credit(dd, vau, vl15buf, 0); + u64 reg = read_csr(dd, SEND_CM_GLOBAL_CREDIT); + + /* set initial values for total and shared credit limit */ + reg &= ~(SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SMASK | + SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SMASK); + + /* + * Set total limit to be equal to VL15 credits. + * Leave shared limit at 0. + */ + reg |= (u64)vl15buf << SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SHIFT; + write_csr(dd, SEND_CM_GLOBAL_CREDIT, reg); write_csr(dd, SEND_CM_CREDIT_VL15, (u64)vl15buf << SEND_CM_CREDIT_VL15_DEDICATED_LIMIT_VL_SHIFT); @@ -6348,9 +6361,11 @@ void reset_link_credits(struct hfi1_devdata *dd) for (i = 0; i < TXE_NUM_DATA_VL; i++) write_csr(dd, SEND_CM_CREDIT_VL + (8 * i), 0); write_csr(dd, SEND_CM_CREDIT_VL15, 0); - write_global_credit(dd, 0, 0, 0); + write_csr(dd, SEND_CM_GLOBAL_CREDIT, 0); /* reset the CM block */ pio_send_control(dd, PSC_CM_RESET); + /* reset cached value */ + dd->vl15buf_cached = 0; } /* convert a vCU to a CU */ @@ -6839,24 +6854,35 @@ void handle_link_up(struct work_struct *work) { struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, link_up_work); + struct hfi1_devdata *dd = ppd->dd; + set_link_state(ppd, HLS_UP_INIT); /* cache the read of DC_LCB_STS_ROUND_TRIP_LTP_CNT */ - read_ltp_rtt(ppd->dd); + read_ltp_rtt(dd); /* * OPA specifies that certain counters are cleared on a transition * to link up, so do that. */ - clear_linkup_counters(ppd->dd); + clear_linkup_counters(dd); /* * And (re)set link up default values. */ set_linkup_defaults(ppd); + /* + * Set VL15 credits. Use cached value from verify cap interrupt. + * In case of quick linkup or simulator, vl15 value will be set by + * handle_linkup_change. VerifyCap interrupt handler will not be + * called in those scenarios. + */ + if (!(quick_linkup || dd->icode == ICODE_FUNCTIONAL_SIMULATOR)) + set_up_vl15(dd, dd->vl15buf_cached); + /* enforce link speed enabled */ if ((ppd->link_speed_active & ppd->link_speed_enabled) == 0) { /* oops - current speed is not enabled, bounce */ - dd_dev_err(ppd->dd, + dd_dev_err(dd, "Link speed active 0x%x is outside enabled 0x%x, downing link\n", ppd->link_speed_active, ppd->link_speed_enabled); set_link_down_reason(ppd, OPA_LINKDOWN_REASON_SPEED_POLICY, 0, @@ -7357,7 +7383,14 @@ void handle_verify_cap(struct work_struct *work) */ if (vau == 0) vau = 1; - set_up_vl15(dd, vau, vl15buf); + set_up_vau(dd, vau); + + /* + * Set VL15 credits to 0 in global credit register. Cache remote VL15 + * credits value and wait for link-up interrupt ot set it. + */ + set_up_vl15(dd, 0); + dd->vl15buf_cached = vl15buf; /* set up the LCB CRC mode */ crc_mask = ppd->port_crc_mode_enabled & partner_supported_crc; diff --git a/drivers/infiniband/hw/hfi1/chip_registers.h b/drivers/infiniband/hw/hfi1/chip_registers.h index 5bfa839d1c48..793514f1d15f 100644 --- a/drivers/infiniband/hw/hfi1/chip_registers.h +++ b/drivers/infiniband/hw/hfi1/chip_registers.h @@ -839,7 +839,9 @@ #define SEND_CM_CTRL_FORCE_CREDIT_MODE_SMASK 0x8ull #define SEND_CM_CTRL_RESETCSR 0x0000000000000020ull #define SEND_CM_GLOBAL_CREDIT (TXE + 0x000000000508) +#define SEND_CM_GLOBAL_CREDIT_AU_MASK 0x7ull #define SEND_CM_GLOBAL_CREDIT_AU_SHIFT 16 +#define SEND_CM_GLOBAL_CREDIT_AU_SMASK 0x70000ull #define SEND_CM_GLOBAL_CREDIT_RESETCSR 0x0000094000030000ull #define SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_MASK 0xFFFFull #define SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SHIFT 0 diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index da322e6668cc..414a04a481c2 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1045,6 +1045,14 @@ struct hfi1_devdata { /* initial vl15 credits to use */ u16 vl15_init; + /* + * Cached value for vl15buf, read during verify cap interrupt. VL15 + * credits are to be kept at 0 and set when handling the link-up + * interrupt. This removes the possibility of receiving VL15 MAD + * packets before this HFI is ready. + */ + u16 vl15buf_cached; + /* Misc small ints */ u8 n_krcv_queues; u8 qos_shift; @@ -1598,7 +1606,8 @@ int hfi1_rcvbuf_validate(u32 size, u8 type, u16 *encode); int fm_get_table(struct hfi1_pportdata *ppd, int which, void *t); int fm_set_table(struct hfi1_pportdata *ppd, int which, void *t); -void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf); +void set_up_vau(struct hfi1_devdata *dd, u8 vau); +void set_up_vl15(struct hfi1_devdata *dd, u16 vl15buf); void reset_link_credits(struct hfi1_devdata *dd); void assign_remote_cm_au_table(struct hfi1_devdata *dd, u8 vcu); diff --git a/drivers/infiniband/hw/hfi1/intr.c b/drivers/infiniband/hw/hfi1/intr.c index ba265d0ae93b..04a5082d5ac5 100644 --- a/drivers/infiniband/hw/hfi1/intr.c +++ b/drivers/infiniband/hw/hfi1/intr.c @@ -130,7 +130,8 @@ void handle_linkup_change(struct hfi1_devdata *dd, u32 linkup) * the remote values. Both sides must be using the values. */ if (quick_linkup || dd->icode == ICODE_FUNCTIONAL_SIMULATOR) { - set_up_vl15(dd, dd->vau, dd->vl15_init); + set_up_vau(dd, dd->vau); + set_up_vl15(dd, dd->vl15_init); assign_remote_cm_au_table(dd, dd->vcu); } From 1feb40067cf04ae48d65f728d62ca255c9449178 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Fri, 12 May 2017 09:02:00 -0700 Subject: [PATCH 0344/1065] RDMA/qib,hfi1: Fix MR reference count leak on write with immediate The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory reference when a buffer cannot be allocated for returning the immediate data. The issue is that the rkey validation has already occurred and the RNR nak fails to release the reference that was fruitlessly gotten. The the peer will send the identical single packet request when its RNR timer pops. The fix is to release the held reference prior to the rnr nak exit. This is the only sequence the requires both rkey validation and the buffer allocation on the same packet. Cc: Stable # 4.7+ Tested-by: Tadeusz Struk Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/rc.c | 5 ++++- drivers/infiniband/hw/qib/qib_rc.c | 4 +++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/rc.c b/drivers/infiniband/hw/hfi1/rc.c index 069bdaf061ab..1080778a1f7c 100644 --- a/drivers/infiniband/hw/hfi1/rc.c +++ b/drivers/infiniband/hw/hfi1/rc.c @@ -2159,8 +2159,11 @@ send_last: ret = hfi1_rvt_get_rwqe(qp, 1); if (ret < 0) goto nack_op_err; - if (!ret) + if (!ret) { + /* peer will send again */ + rvt_put_ss(&qp->r_sge); goto rnr_nak; + } wc.ex.imm_data = ohdr->u.rc.imm_data; wc.wc_flags = IB_WC_WITH_IMM; goto send_last; diff --git a/drivers/infiniband/hw/qib/qib_rc.c b/drivers/infiniband/hw/qib/qib_rc.c index fc8b88514da5..4ddbcac5eabe 100644 --- a/drivers/infiniband/hw/qib/qib_rc.c +++ b/drivers/infiniband/hw/qib/qib_rc.c @@ -1956,8 +1956,10 @@ send_last: ret = qib_get_rwqe(qp, 1); if (ret < 0) goto nack_op_err; - if (!ret) + if (!ret) { + rvt_put_ss(&qp->r_sge); goto rnr_nak; + } wc.ex.imm_data = ohdr->u.rc.imm_data; hdrsize += 4; wc.wc_flags = IB_WC_WITH_IMM; From eed7624552ca55c346a4e9ccaa9ab0723841aee6 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Sun, 21 May 2017 19:11:13 +0300 Subject: [PATCH 0345/1065] RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled The cited patch added a type field to structures ib_ah and rdma_ah_attr. Function mlx4_ib_query_ah() builds an rdma_ah_attr structure from the data in an mlx4_ib_ah structure (which contains both an ib_ah structure and an address vector). For mlx4_ib_query_ah() to work properly, the type field in the contained ib_ah structure must be set correctly. In the outgoing MAD tunneling flow, procedure mlx4_ib_multiplex_mad() paravirtualizes a MAD received from a slave and sends the processed mad out over the wire. During this processing, it populates an mlx4_ib_ah structure and calls mlx4_ib_query_ah(). The cited commit overlooked setting the type field in the contained ib_ah structure before invoking mlx4_ib_query_ah(). As a result, the type field remained uninitialized, and the rdma_ah_attr structure was incorrectly built. This resulted in improperly built MADs being sent out over the wire. This patch properly initializes the type field in the contained ib_ah structure before calling mlx4_ib_query_ah(). The rdma_ah_attr structure is then generated correctly. Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/mad.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index b4694717f6f3..21d31cb1325f 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -1578,6 +1578,7 @@ static void mlx4_ib_multiplex_mad(struct mlx4_ib_demux_pv_ctx *ctx, struct ib_wc if (port < 0) return; ah.av.ib.port_pd = cpu_to_be32(port << 24 | (be32_to_cpu(ah.av.ib.port_pd) & 0xffffff)); + ah.ibah.type = rdma_ah_find_type(&dev->ib_dev, port); mlx4_ib_query_ah(&ah.ibah, &ah_attr); if (rdma_ah_get_ah_flags(&ah_attr) & IB_AH_GRH) From 1410a90ae449061b7e1ae19d275148f36948801b Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Sun, 28 May 2017 10:53:10 +0300 Subject: [PATCH 0346/1065] net/mlx5: Define interface bits for fencing UMR wqe HW can implement UMR wqe re-transmission in various ways. Thus, add HCA cap to distinguish the needed fence for UMR to make sure that the wqe wouldn't fail on mkey checks. Signed-off-by: Max Gurtovoy Acked-by: Leon Romanovsky Reviewed-by: Christoph Hellwig Signed-off-by: Doug Ledford --- include/linux/mlx5/mlx5_ifc.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 32de0724b400..edafedb7b509 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -766,6 +766,12 @@ enum { MLX5_CAP_PORT_TYPE_ETH = 0x1, }; +enum { + MLX5_CAP_UMR_FENCE_STRONG = 0x0, + MLX5_CAP_UMR_FENCE_SMALL = 0x1, + MLX5_CAP_UMR_FENCE_NONE = 0x2, +}; + struct mlx5_ifc_cmd_hca_cap_bits { u8 reserved_at_0[0x80]; @@ -875,7 +881,9 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 reserved_at_202[0x1]; u8 ipoib_enhanced_offloads[0x1]; u8 ipoib_basic_offloads[0x1]; - u8 reserved_at_205[0xa]; + u8 reserved_at_205[0x5]; + u8 umr_fence[0x2]; + u8 reserved_at_20c[0x3]; u8 drain_sigerr[0x1]; u8 cmdif_checksum[0x2]; u8 sigerr_cqe[0x1]; From 6e8484c5cf07c7ee632587e98c1a12d319dacb7c Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Sun, 28 May 2017 10:53:11 +0300 Subject: [PATCH 0347/1065] RDMA/mlx5: set UMR wqe fence according to HCA cap Cache the needed umr_fence and set the wqe ctrl segmennt accordingly. Signed-off-by: Max Gurtovoy Acked-by: Leon Romanovsky Reviewed-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 14 +++++++ drivers/infiniband/hw/mlx5/mlx5_ib.h | 3 +- drivers/infiniband/hw/mlx5/qp.c | 59 +++++++++++----------------- 3 files changed, 39 insertions(+), 37 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index d45772da0963..0c79983c8b1a 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -2979,6 +2979,18 @@ error_0: return ret; } +static u8 mlx5_get_umr_fence(u8 umr_fence_cap) +{ + switch (umr_fence_cap) { + case MLX5_CAP_UMR_FENCE_NONE: + return MLX5_FENCE_MODE_NONE; + case MLX5_CAP_UMR_FENCE_SMALL: + return MLX5_FENCE_MODE_INITIATOR_SMALL; + default: + return MLX5_FENCE_MODE_STRONG_ORDERING; + } +} + static int create_dev_resources(struct mlx5_ib_resources *devr) { struct ib_srq_init_attr attr; @@ -3693,6 +3705,8 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev) mlx5_ib_internal_fill_odp_caps(dev); + dev->umr_fence = mlx5_get_umr_fence(MLX5_CAP_GEN(mdev, umr_fence)); + if (MLX5_CAP_GEN(mdev, imaicl)) { dev->ib_dev.alloc_mw = mlx5_ib_alloc_mw; dev->ib_dev.dealloc_mw = mlx5_ib_dealloc_mw; diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h index 38c877bc45e5..bdcf25410c99 100644 --- a/drivers/infiniband/hw/mlx5/mlx5_ib.h +++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h @@ -349,7 +349,7 @@ struct mlx5_ib_qp { struct mlx5_ib_wq rq; u8 sq_signal_bits; - u8 fm_cache; + u8 next_fence; struct mlx5_ib_wq sq; /* serialize qp state modifications @@ -654,6 +654,7 @@ struct mlx5_ib_dev { struct mlx5_ib_port *port; struct mlx5_sq_bfreg bfreg; struct mlx5_sq_bfreg fp_bfreg; + u8 umr_fence; }; static inline struct mlx5_ib_cq *to_mibcq(struct mlx5_core_cq *mcq) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 93959e1e43a3..ebb6768684de 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -3738,24 +3738,6 @@ static void dump_wqe(struct mlx5_ib_qp *qp, int idx, int size_16) } } -static u8 get_fence(u8 fence, struct ib_send_wr *wr) -{ - if (unlikely(wr->opcode == IB_WR_LOCAL_INV && - wr->send_flags & IB_SEND_FENCE)) - return MLX5_FENCE_MODE_STRONG_ORDERING; - - if (unlikely(fence)) { - if (wr->send_flags & IB_SEND_FENCE) - return MLX5_FENCE_MODE_SMALL_AND_FENCE; - else - return fence; - } else if (unlikely(wr->send_flags & IB_SEND_FENCE)) { - return MLX5_FENCE_MODE_FENCE; - } - - return 0; -} - static int begin_wqe(struct mlx5_ib_qp *qp, void **seg, struct mlx5_wqe_ctrl_seg **ctrl, struct ib_send_wr *wr, unsigned *idx, @@ -3784,8 +3766,7 @@ static int begin_wqe(struct mlx5_ib_qp *qp, void **seg, static void finish_wqe(struct mlx5_ib_qp *qp, struct mlx5_wqe_ctrl_seg *ctrl, u8 size, unsigned idx, u64 wr_id, - int nreq, u8 fence, u8 next_fence, - u32 mlx5_opcode) + int nreq, u8 fence, u32 mlx5_opcode) { u8 opmod = 0; @@ -3793,7 +3774,6 @@ static void finish_wqe(struct mlx5_ib_qp *qp, mlx5_opcode | ((u32)opmod << 24)); ctrl->qpn_ds = cpu_to_be32(size | (qp->trans_qp.base.mqp.qpn << 8)); ctrl->fm_ce_se |= fence; - qp->fm_cache = next_fence; if (unlikely(qp->wq_sig)) ctrl->signature = wq_sig(ctrl); @@ -3853,7 +3833,6 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, goto out; } - fence = qp->fm_cache; num_sge = wr->num_sge; if (unlikely(num_sge > qp->sq.max_gs)) { mlx5_ib_warn(dev, "\n"); @@ -3870,6 +3849,19 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, goto out; } + if (wr->opcode == IB_WR_LOCAL_INV || + wr->opcode == IB_WR_REG_MR) { + fence = dev->umr_fence; + next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL; + } else if (wr->send_flags & IB_SEND_FENCE) { + if (qp->next_fence) + fence = MLX5_FENCE_MODE_SMALL_AND_FENCE; + else + fence = MLX5_FENCE_MODE_FENCE; + } else { + fence = qp->next_fence; + } + switch (ibqp->qp_type) { case IB_QPT_XRC_INI: xrc = seg; @@ -3896,7 +3888,6 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, goto out; case IB_WR_LOCAL_INV: - next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL; qp->sq.wr_data[idx] = IB_WR_LOCAL_INV; ctrl->imm = cpu_to_be32(wr->ex.invalidate_rkey); set_linv_wr(qp, &seg, &size); @@ -3904,7 +3895,6 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, break; case IB_WR_REG_MR: - next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL; qp->sq.wr_data[idx] = IB_WR_REG_MR; ctrl->imm = cpu_to_be32(reg_wr(wr)->key); err = set_reg_wr(qp, reg_wr(wr), &seg, &size); @@ -3927,9 +3917,8 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, goto out; } - finish_wqe(qp, ctrl, size, idx, wr->wr_id, - nreq, get_fence(fence, wr), - next_fence, MLX5_OPCODE_UMR); + finish_wqe(qp, ctrl, size, idx, wr->wr_id, nreq, + fence, MLX5_OPCODE_UMR); /* * SET_PSV WQEs are not signaled and solicited * on error @@ -3954,9 +3943,8 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, goto out; } - finish_wqe(qp, ctrl, size, idx, wr->wr_id, - nreq, get_fence(fence, wr), - next_fence, MLX5_OPCODE_SET_PSV); + finish_wqe(qp, ctrl, size, idx, wr->wr_id, nreq, + fence, MLX5_OPCODE_SET_PSV); err = begin_wqe(qp, &seg, &ctrl, wr, &idx, &size, nreq); if (err) { @@ -3966,7 +3954,6 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, goto out; } - next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL; err = set_psv_wr(&sig_handover_wr(wr)->sig_attrs->wire, mr->sig->psv_wire.psv_idx, &seg, &size); @@ -3976,9 +3963,9 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, goto out; } - finish_wqe(qp, ctrl, size, idx, wr->wr_id, - nreq, get_fence(fence, wr), - next_fence, MLX5_OPCODE_SET_PSV); + finish_wqe(qp, ctrl, size, idx, wr->wr_id, nreq, + fence, MLX5_OPCODE_SET_PSV); + qp->next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL; num_sge = 0; goto skip_psv; @@ -4089,8 +4076,8 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, } } - finish_wqe(qp, ctrl, size, idx, wr->wr_id, nreq, - get_fence(fence, wr), next_fence, + qp->next_fence = next_fence; + finish_wqe(qp, ctrl, size, idx, wr->wr_id, nreq, fence, mlx5_ib_opcode[wr->opcode]); skip_psv: if (0) From d38d7fdafaf89d1756f27e9b4054dd19a1d2f545 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 22 May 2017 13:30:15 -0500 Subject: [PATCH 0348/1065] RDMA/qedr: add null check before pointer dereference Add null check before dereferencing pointer sgid_attr.ndev inside function rdma_vlan_dev_vlan_id(). Addresses-Coverity-ID: 1373979 Signed-off-by: Gustavo A. R. Silva Acked-by: Ram Amrani Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qedr/qedr_cm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/qedr/qedr_cm.c b/drivers/infiniband/hw/qedr/qedr_cm.c index 3d7705cec770..d86dbe814d98 100644 --- a/drivers/infiniband/hw/qedr/qedr_cm.c +++ b/drivers/infiniband/hw/qedr/qedr_cm.c @@ -270,11 +270,13 @@ static inline int qedr_gsi_build_header(struct qedr_dev *dev, return rc; } - vlan_id = rdma_vlan_dev_vlan_id(sgid_attr.ndev); - if (vlan_id < VLAN_CFI_MASK) - has_vlan = true; - if (sgid_attr.ndev) + if (sgid_attr.ndev) { + vlan_id = rdma_vlan_dev_vlan_id(sgid_attr.ndev); + if (vlan_id < VLAN_CFI_MASK) + has_vlan = true; + dev_put(sgid_attr.ndev); + } if (!memcmp(&sgid, &zgid, sizeof(sgid))) { DP_ERR(dev, "gsi post send: GID not found GID index %d\n", From 8c490669deb0133dfb6bfe7a80d7cfef3bbbd92f Mon Sep 17 00:00:00 2001 From: Honggang Li Date: Thu, 11 May 2017 20:14:28 +0800 Subject: [PATCH 0349/1065] RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings ipoib_dev_init accesses the wrong private data for the IPoIB device. Commit cd565b4b51e5 (IB/IPoIB: Support acceleration options callbacks) changed ipoib_priv from being identical to netdev_priv to being an area inside of, but not the same pointer as, the netdev_priv pointer. As such, the struct we want is the ipoib_priv area, not the netdev_priv area, so use the right accessor, otherwise we kernel panic. [ 27.271938] IPv6: ADDRCONF(NETDEV_CHANGE): mlx5_ib0.8006: link becomes ready [ 28.156790] BUG: unable to handle kernel NULL pointer dereference at 000000000000067c [ 28.166309] IP: ib_query_port+0x30/0x180 [ib_core] ... [ 28.306282] RIP: 0010:ib_query_port+0x30/0x180 [ib_core] ... [ 28.393337] Call Trace: [ 28.397594] ipoib_get_link_ksettings+0x66/0xe0 [ib_ipoib] [ 28.405274] __ethtool_get_link_ksettings+0xa0/0x1c0 [ 28.412353] speed_show+0x74/0xa0 [ 28.417503] dev_attr_show+0x20/0x50 [ 28.422922] ? mutex_lock+0x12/0x40 [ 28.428179] sysfs_kf_seq_show+0xbf/0x1a0 [ 28.434002] kernfs_seq_show+0x21/0x30 [ 28.439470] seq_read+0x116/0x3b0 [ 28.444445] ? do_filp_open+0xa5/0x100 [ 28.449774] kernfs_fop_read+0xff/0x180 [ 28.455220] __vfs_read+0x37/0x150 [ 28.460167] ? security_file_permission+0x9d/0xc0 [ 28.466560] vfs_read+0x8c/0x130 [ 28.471318] SyS_read+0x55/0xc0 [ 28.475950] do_syscall_64+0x67/0x150 [ 28.481163] entry_SYSCALL64_slow_path+0x25/0x25 ... [ 28.584493] ---[ end trace 3549968a4bf0aa5d ]--- Fixes: cd565b4b51e5 (IB/IPoIB: Support acceleration options callbacks) Fixes: 0d7e2d2166f6 (IB/ipoib: add get_link_ksettings in ethtool) Signed-off-by: Honggang Li Reviewed-by: Yuval Shaia Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c index 874b24366e4d..7871379342f4 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c @@ -178,7 +178,7 @@ static inline int ib_speed_enum_to_int(int speed) static int ipoib_get_link_ksettings(struct net_device *netdev, struct ethtool_link_ksettings *cmd) { - struct ipoib_dev_priv *priv = netdev_priv(netdev); + struct ipoib_dev_priv *priv = ipoib_priv(netdev); struct ib_port_attr attr; int ret, speed, width; From 0a1a972630c77edb39adf310699e404b8bf9176e Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 14 May 2017 13:32:06 +0300 Subject: [PATCH 0350/1065] RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope ipoib_dev_uninit_default() call is used in ipoib_main.c file only and it generates the following warning from smatch tool: drivers/infiniband/ulp/ipoib/ipoib_main.c:1593:6: warning: symbol 'ipoib_dev_uninit_default' was not declared. Should it be static? so let's declare that function as static. Signed-off-by: Leon Romanovsky Reviewed-by: Yuval Shaia Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 2869d1adb1de..a115c0b7a310 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1590,7 +1590,7 @@ static void ipoib_neigh_hash_uninit(struct net_device *dev) wait_for_completion(&priv->ntbl.deleted); } -void ipoib_dev_uninit_default(struct net_device *dev) +static void ipoib_dev_uninit_default(struct net_device *dev) { struct ipoib_dev_priv *priv = ipoib_priv(dev); From 95c2ef50c726a51d580c35ae8dccd383abaa8701 Mon Sep 17 00:00:00 2001 From: Israel Rukshin Date: Thu, 11 May 2017 18:52:36 +0300 Subject: [PATCH 0351/1065] RDMA/srp: Fix NULL deref at srp_destroy_qp() If srp_init_qp() fails at srp_create_ch_ib() then ch->send_cq may be NULL. Calling directly to ib_destroy_qp() is sufficient because no work requests were posted on the created qp. Fixes: 9294000d6d89 ("IB/srp: Drain the send queue before destroying a QP") Cc: Signed-off-by: Israel Rukshin Reviewed-by: Max Gurtovoy Reviewed-by: Bart van Assche -- Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/srp/ib_srp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index def723a5df29..4306285fb155 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -575,7 +575,7 @@ static int srp_create_ch_ib(struct srp_rdma_ch *ch) return 0; err_qp: - srp_destroy_qp(ch, qp); + ib_destroy_qp(qp); err_send_cq: ib_free_cq(send_cq); From 233c1955835bd8649003be9bb3d8e79788b08be1 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 14 May 2017 15:49:57 +0300 Subject: [PATCH 0352/1065] RDMA/netlink: Reduce exposure of RDMA netlink functions RDMA netlink is part of ib_core, hence ibnl_chk_listeners(), ibnl_init() and ibnl_cleanup() don't need to be published in public header file. Let's remove EXPORT_SYMBOL from ibnl_chk_listeners() and move all these functions to private header file. CC: Yuval Shaia Signed-off-by: Leon Romanovsky Reviewed-by: Yuval Shaia Signed-off-by: Doug Ledford --- drivers/infiniband/core/core_priv.h | 10 ++++++++++ drivers/infiniband/core/netlink.c | 2 +- include/rdma/rdma_netlink.h | 10 ---------- 3 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/infiniband/core/core_priv.h b/drivers/infiniband/core/core_priv.h index cb7d372e4bdf..d92ab4eaa8f3 100644 --- a/drivers/infiniband/core/core_priv.h +++ b/drivers/infiniband/core/core_priv.h @@ -169,6 +169,16 @@ void ib_mad_cleanup(void); int ib_sa_init(void); void ib_sa_cleanup(void); +int ibnl_init(void); +void ibnl_cleanup(void); + +/** + * Check if there are any listeners to the netlink group + * @group: the netlink group ID + * Returns 0 on success or a negative for no listeners. + */ +int ibnl_chk_listeners(unsigned int group); + int ib_nl_handle_resolve_resp(struct sk_buff *skb, struct netlink_callback *cb); int ib_nl_handle_set_timeout(struct sk_buff *skb, diff --git a/drivers/infiniband/core/netlink.c b/drivers/infiniband/core/netlink.c index b784055423c8..94931c474d41 100644 --- a/drivers/infiniband/core/netlink.c +++ b/drivers/infiniband/core/netlink.c @@ -37,6 +37,7 @@ #include #include #include +#include "core_priv.h" struct ibnl_client { struct list_head list; @@ -55,7 +56,6 @@ int ibnl_chk_listeners(unsigned int group) return -1; return 0; } -EXPORT_SYMBOL(ibnl_chk_listeners); int ibnl_add_client(int index, int nops, const struct ibnl_client_cbs cb_table[]) diff --git a/include/rdma/rdma_netlink.h b/include/rdma/rdma_netlink.h index 585266144329..348c102cb5f6 100644 --- a/include/rdma/rdma_netlink.h +++ b/include/rdma/rdma_netlink.h @@ -10,9 +10,6 @@ struct ibnl_client_cbs { struct module *module; }; -int ibnl_init(void); -void ibnl_cleanup(void); - /** * Add a a client to the list of IB netlink exporters. * @index: Index of the added client @@ -77,11 +74,4 @@ int ibnl_unicast(struct sk_buff *skb, struct nlmsghdr *nlh, int ibnl_multicast(struct sk_buff *skb, struct nlmsghdr *nlh, unsigned int group, gfp_t flags); -/** - * Check if there are any listeners to the netlink group - * @group: the netlink group ID - * Returns 0 on success or a negative for no listeners. - */ -int ibnl_chk_listeners(unsigned int group); - #endif /* _RDMA_NETLINK_H */ From f937d93a9122d1510ca6e4bb8d860aedcf9408c3 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Thu, 18 May 2017 07:40:33 +0300 Subject: [PATCH 0353/1065] RDMA/uverbs: Declare local function static and add brackets to sizeof Commit 57520751445b ("IB/SA: Add OPA path record type") introduced new local function __ib_copy_path_rec_to_user, but didn't limit its scope. This produces the following sparse warning: drivers/infiniband/core/uverbs_marshall.c:99:6: warning: symbol '__ib_copy_path_rec_to_user' was not declared. Should it be static? In addition, it used sizeof ... notations instead of sizeof(...), which is correct in C, but a little bit misleading. Let's change it too. Fixes: 57520751445b ("IB/SA: Add OPA path record type") Reviewed-by: Yuval Shaia Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/uverbs_marshall.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/core/uverbs_marshall.c b/drivers/infiniband/core/uverbs_marshall.c index 8b9587fe2303..94fd989c9060 100644 --- a/drivers/infiniband/core/uverbs_marshall.c +++ b/drivers/infiniband/core/uverbs_marshall.c @@ -96,11 +96,11 @@ void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst, } EXPORT_SYMBOL(ib_copy_qp_attr_to_user); -void __ib_copy_path_rec_to_user(struct ib_user_path_rec *dst, - struct sa_path_rec *src) +static void __ib_copy_path_rec_to_user(struct ib_user_path_rec *dst, + struct sa_path_rec *src) { - memcpy(dst->dgid, src->dgid.raw, sizeof src->dgid); - memcpy(dst->sgid, src->sgid.raw, sizeof src->sgid); + memcpy(dst->dgid, src->dgid.raw, sizeof(src->dgid)); + memcpy(dst->sgid, src->sgid.raw, sizeof(src->sgid)); dst->dlid = htons(ntohl(sa_path_get_dlid(src))); dst->slid = htons(ntohl(sa_path_get_slid(src))); From 53376fedb9da54c0d3b0bd3a6edcbeb681692909 Mon Sep 17 00:00:00 2001 From: Qing Huang Date: Thu, 18 May 2017 16:33:53 -0700 Subject: [PATCH 0354/1065] RDMA/core: not to set page dirty bit if it's already set. This change will optimize kernel memory deregistration operations. __ib_umem_release() used to call set_page_dirty_lock() against every writable page in its memory region. Its purpose is to keep data synced between CPU and DMA device when swapping happens after mem deregistration ops. Now we choose not to set page dirty bit if it's already set by kernel prior to calling __ib_umem_release(). This reduces memory deregistration time by half or even more when we ran application simulation test program. Signed-off-by: Qing Huang Signed-off-by: Doug Ledford --- drivers/infiniband/core/umem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index 3dbf811d3c51..21e60b1e2ff4 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -58,7 +58,7 @@ static void __ib_umem_release(struct ib_device *dev, struct ib_umem *umem, int d for_each_sg(umem->sg_head.sgl, sg, umem->npages, i) { page = sg_page(sg); - if (umem->writable && dirty) + if (!PageDirty(page) && umem->writable && dirty) set_page_dirty_lock(page); put_page(page); } From 79bb5b7ee1776a244484a1be6671d89fbd7c0c9f Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 21 May 2017 19:08:09 +0300 Subject: [PATCH 0355/1065] RDMA/umem: Fix missing mmap_sem in get umem ODP call Add mmap_sem lock around VMA inspection in ib_umem_odp_get(). Fixes: 0008b84ea9af ('IB/umem: Add support to huge ODP') Signed-off-by: Artemy Kovalyov Reviewed-by: Eli Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/umem_odp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/umem_odp.c b/drivers/infiniband/core/umem_odp.c index 0780b1afefa9..8c4ec564e495 100644 --- a/drivers/infiniband/core/umem_odp.c +++ b/drivers/infiniband/core/umem_odp.c @@ -321,11 +321,15 @@ int ib_umem_odp_get(struct ib_ucontext *context, struct ib_umem *umem, struct vm_area_struct *vma; struct hstate *h; + down_read(&mm->mmap_sem); vma = find_vma(mm, ib_umem_start(umem)); - if (!vma || !is_vm_hugetlb_page(vma)) + if (!vma || !is_vm_hugetlb_page(vma)) { + up_read(&mm->mmap_sem); return -EINVAL; + } h = hstate_vma(vma); umem->page_shift = huge_page_shift(h); + up_read(&mm->mmap_sem); umem->hugetlb = 1; } else { umem->hugetlb = 0; From d3957b86a40612826ef935f474b31359d66cbdca Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Sun, 21 May 2017 19:09:54 +0300 Subject: [PATCH 0356/1065] RDMA/SA: Fix kernel panic in CMA request handler flow Commit 9fdca4da4d8c (IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields) moved the service_id to be specific attribute for IB and OPA SA Path Record, and thus wasn't assigned for RoCE. This caused to the following kernel panic in the CMA request handler flow: [ 27.074594] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 27.074731] IP: __radix_tree_lookup+0x1d/0xe0 ... [ 27.075356] Workqueue: ib_cm cm_work_handler [ib_cm] [ 27.075401] task: ffff88022e3b8000 task.stack: ffffc90001298000 [ 27.075449] RIP: 0010:__radix_tree_lookup+0x1d/0xe0 ... [ 27.075979] Call Trace: [ 27.076015] radix_tree_lookup+0xd/0x10 [ 27.076055] cma_ps_find+0x59/0x70 [rdma_cm] [ 27.076097] cma_id_from_event+0xd2/0x470 [rdma_cm] [ 27.076144] ? ib_init_ah_from_path+0x39a/0x590 [ib_core] [ 27.076193] cma_req_handler+0x25/0x480 [rdma_cm] [ 27.076237] cm_process_work+0x25/0x120 [ib_cm] [ 27.076280] ? cm_get_bth_pkey.isra.62+0x3c/0xa0 [ib_cm] [ 27.076350] cm_req_handler+0xb03/0xd40 [ib_cm] [ 27.076430] ? sched_clock_cpu+0x11/0xb0 [ 27.076478] cm_work_handler+0x194/0x1588 [ib_cm] [ 27.076525] process_one_work+0x160/0x410 [ 27.076565] worker_thread+0x137/0x4a0 [ 27.076614] kthread+0x112/0x150 [ 27.076684] ? max_active_store+0x60/0x60 [ 27.077642] ? kthread_park+0x90/0x90 [ 27.078530] ret_from_fork+0x2c/0x40 This patch moves it back to the common SA Path Record structure and removes the redundant setter and getter. Tested on Connect-IB and Connect-X4 in Infiniband and RoCE respectively. Fixes: 9fdca4da4d8c (IB/SA: Split struct sa_path_rec based on IB ands ROCE specific fields) Signed-off-by: Majd Dibbiny Reviewed-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cm.c | 4 ++-- drivers/infiniband/core/cma.c | 13 ++++++------- drivers/infiniband/core/sa_query.c | 6 +++--- drivers/infiniband/ulp/srp/ib_srp.c | 2 +- include/rdma/ib_sa.h | 25 +++---------------------- 5 files changed, 15 insertions(+), 35 deletions(-) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 1844770f3ae8..2b4d613a3474 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -1429,7 +1429,7 @@ static void cm_format_paths_from_req(struct cm_req_msg *req_msg, primary_path->packet_life_time = cm_req_get_primary_local_ack_timeout(req_msg); primary_path->packet_life_time -= (primary_path->packet_life_time > 0); - sa_path_set_service_id(primary_path, req_msg->service_id); + primary_path->service_id = req_msg->service_id; if (req_msg->alt_local_lid) { alt_path->dgid = req_msg->alt_local_gid; @@ -1452,7 +1452,7 @@ static void cm_format_paths_from_req(struct cm_req_msg *req_msg, alt_path->packet_life_time = cm_req_get_alt_local_ack_timeout(req_msg); alt_path->packet_life_time -= (alt_path->packet_life_time > 0); - sa_path_set_service_id(alt_path, req_msg->service_id); + alt_path->service_id = req_msg->service_id; } } diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 91b7a2fe5a55..31bb82d8ecd7 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1140,7 +1140,7 @@ static void cma_save_ib_info(struct sockaddr *src_addr, ib->sib_pkey = path->pkey; ib->sib_flowinfo = path->flow_label; memcpy(&ib->sib_addr, &path->sgid, 16); - ib->sib_sid = sa_path_get_service_id(path); + ib->sib_sid = path->service_id; ib->sib_scope_id = 0; } else { ib->sib_pkey = listen_ib->sib_pkey; @@ -1274,8 +1274,7 @@ static int cma_save_req_info(const struct ib_cm_event *ib_event, memcpy(&req->local_gid, &req_param->primary_path->sgid, sizeof(req->local_gid)); req->has_gid = true; - req->service_id = - sa_path_get_service_id(req_param->primary_path); + req->service_id = req_param->primary_path->service_id; req->pkey = be16_to_cpu(req_param->primary_path->pkey); if (req->pkey != req_param->bth_pkey) pr_warn_ratelimited("RDMA CMA: got different BTH P_Key (0x%x) and primary path P_Key (0x%x)\n" @@ -1827,7 +1826,8 @@ static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id, struct rdma_route *rt; const sa_family_t ss_family = listen_id->route.addr.src_addr.ss_family; struct sa_path_rec *path = ib_event->param.req_rcvd.primary_path; - const __be64 service_id = sa_path_get_service_id(path); + const __be64 service_id = + ib_event->param.req_rcvd.primary_path->service_id; int ret; id = rdma_create_id(listen_id->route.addr.dev_addr.net, @@ -2345,9 +2345,8 @@ static int cma_query_ib_route(struct rdma_id_private *id_priv, int timeout_ms, path_rec.pkey = cpu_to_be16(ib_addr_get_pkey(dev_addr)); path_rec.numb_path = 1; path_rec.reversible = 1; - sa_path_set_service_id(&path_rec, - rdma_get_service_id(&id_priv->id, - cma_dst_addr(id_priv))); + path_rec.service_id = rdma_get_service_id(&id_priv->id, + cma_dst_addr(id_priv)); comp_mask = IB_SA_PATH_REC_DGID | IB_SA_PATH_REC_SGID | IB_SA_PATH_REC_PKEY | IB_SA_PATH_REC_NUMB_PATH | diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index e335b09c022e..fb7aec4047c8 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -194,7 +194,7 @@ static u32 tid; .field_name = "sa_path_rec:" #field static const struct ib_field path_rec_table[] = { - { PATH_REC_FIELD(ib.service_id), + { PATH_REC_FIELD(service_id), .offset_words = 0, .offset_bits = 0, .size_bits = 64 }, @@ -296,7 +296,7 @@ static const struct ib_field path_rec_table[] = { .field_name = "sa_path_rec:" #field static const struct ib_field opa_path_rec_table[] = { - { OPA_PATH_REC_FIELD(opa.service_id), + { OPA_PATH_REC_FIELD(service_id), .offset_words = 0, .offset_bits = 0, .size_bits = 64 }, @@ -774,7 +774,7 @@ static void ib_nl_set_path_rec_attrs(struct sk_buff *skb, /* Now build the attributes */ if (comp_mask & IB_SA_PATH_REC_SERVICE_ID) { - val64 = be64_to_cpu(sa_path_get_service_id(sa_rec)); + val64 = be64_to_cpu(sa_rec->service_id); nla_put(skb, RDMA_NLA_F_MANDATORY | LS_NLA_TYPE_SERVICE_ID, sizeof(val64), &val64); } diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 4306285fb155..2354c742caa1 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -320,7 +320,7 @@ static int srp_new_cm_id(struct srp_rdma_ch *ch) ch->path.sgid = target->sgid; ch->path.dgid = target->orig_dgid; ch->path.pkey = target->pkey; - sa_path_set_service_id(&ch->path, target->service_id); + ch->path.service_id = target->service_id; return 0; } diff --git a/include/rdma/ib_sa.h b/include/rdma/ib_sa.h index f5f70e345318..355b81f4242d 100644 --- a/include/rdma/ib_sa.h +++ b/include/rdma/ib_sa.h @@ -158,7 +158,6 @@ enum sa_path_rec_type { }; struct sa_path_rec_ib { - __be64 service_id; __be16 dlid; __be16 slid; u8 raw_traffic; @@ -174,7 +173,6 @@ struct sa_path_rec_roce { }; struct sa_path_rec_opa { - __be64 service_id; __be32 dlid; __be32 slid; u8 raw_traffic; @@ -189,6 +187,7 @@ struct sa_path_rec_opa { struct sa_path_rec { union ib_gid dgid; union ib_gid sgid; + __be64 service_id; /* reserved */ __be32 flow_label; u8 hop_limit; @@ -262,7 +261,7 @@ static inline void path_conv_opa_to_ib(struct sa_path_rec *ib, ib->ib.dlid = htons(ntohl(opa->opa.dlid)); ib->ib.slid = htons(ntohl(opa->opa.slid)); } - ib->ib.service_id = opa->opa.service_id; + ib->service_id = opa->service_id; ib->ib.raw_traffic = opa->opa.raw_traffic; } @@ -281,7 +280,7 @@ static inline void path_conv_ib_to_opa(struct sa_path_rec *opa, } opa->opa.slid = slid; opa->opa.dlid = dlid; - opa->opa.service_id = ib->ib.service_id; + opa->service_id = ib->service_id; opa->opa.raw_traffic = ib->ib.raw_traffic; } @@ -591,15 +590,6 @@ static inline bool sa_path_is_roce(struct sa_path_rec *rec) (rec->rec_type == SA_PATH_REC_TYPE_ROCE_V2)); } -static inline void sa_path_set_service_id(struct sa_path_rec *rec, - __be64 service_id) -{ - if (rec->rec_type == SA_PATH_REC_TYPE_IB) - rec->ib.service_id = service_id; - else if (rec->rec_type == SA_PATH_REC_TYPE_OPA) - rec->opa.service_id = service_id; -} - static inline void sa_path_set_slid(struct sa_path_rec *rec, __be32 slid) { if (rec->rec_type == SA_PATH_REC_TYPE_IB) @@ -625,15 +615,6 @@ static inline void sa_path_set_raw_traffic(struct sa_path_rec *rec, rec->opa.raw_traffic = raw_traffic; } -static inline __be64 sa_path_get_service_id(struct sa_path_rec *rec) -{ - if (rec->rec_type == SA_PATH_REC_TYPE_IB) - return rec->ib.service_id; - else if (rec->rec_type == SA_PATH_REC_TYPE_OPA) - return rec->opa.service_id; - return 0; -} - static inline __be32 sa_path_get_slid(struct sa_path_rec *rec) { if (rec->rec_type == SA_PATH_REC_TYPE_IB) From cf5cde2199058f1aed33f8b5f637c02a95936031 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 24 May 2017 14:10:10 +0900 Subject: [PATCH 0357/1065] ARM: dts: versatile: use #include "..." to include local DT Most of DT files in ARM use #include "..." to make pre-processor include DT in the same directory, but this is one of the exceptional files that use #include <...> for that. Fix it to remove -I$(srctree)/arch/$(SRCARCH)/boot/dts path from dtc_cpp_flags. ARM: dts: versatile: use #include "..." to include DT in the same directory Most of DT files in ARM use #include "..." to make pre-processor include DT in the same directory, but we have 3 exceptional files that use #include <...> for that. They must be fixed to remove -I$(srctree)/arch/$(SRCARCH)/boot/dts path from dtc_cpp_flags. Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm/boot/dts/versatile-pb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 33a8eb28374e..06e2331f666d 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -1,4 +1,4 @@ -#include +#include "versatile-ab.dts" / { model = "ARM Versatile PB"; From 73069883c017d454737d07a5aeab2b1639fcfeca Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Mon, 29 May 2017 17:17:54 +0200 Subject: [PATCH 0358/1065] MAINTAINERS: remove kernel@stlinux.com obsolete mailing list The STMicroelectronics dedicated mailing list kernel@stlinux.com is no more available, remove it to avoid bouncing mails. Several request to create a new mailing list has been send by Benjamin Gaignard and me but without any answers. Signed-off-by: Patrice Chotard Signed-off-by: Olof Johansson --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8c66b44e4235..b66d6dd4cd70 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1829,7 +1829,6 @@ F: drivers/edac/altera_edac. ARM/STI ARCHITECTURE M: Patrice Chotard L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -L: kernel@stlinux.com W: http://www.stlinux.com S: Maintained F: arch/arm/mach-sti/ @@ -11264,7 +11263,6 @@ F: drivers/media/rc/serial_ir.c STI CEC DRIVER M: Benjamin Gaignard -L: kernel@stlinux.com S: Maintained F: drivers/staging/media/st-cec/ F: Documentation/devicetree/bindings/media/stih-cec.txt From c4beedb8a914af9c8c1b6e67c753adf411e05160 Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Thu, 1 Jun 2017 22:05:40 -0700 Subject: [PATCH 0359/1065] Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL Commit 4e552c8cb5bc ("leds: add LED_ON brightness as boolean value") has introduced the LED_ON enumeration value that can be used instead of LED_FULL which has more of a linear value. Because the tm2-touchscreen doesn't have brightness levels, but it's a simple on/off led, use LED_ON instead of LED_FULL. Signed-off-by: Andi Shyti Reviewed-by: Jaechul Lee Tested-by: Jaechul Lee Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tm2-touchkey.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c index 485900f953e0..abc266e40e17 100644 --- a/drivers/input/keyboard/tm2-touchkey.c +++ b/drivers/input/keyboard/tm2-touchkey.c @@ -213,7 +213,7 @@ static int tm2_touchkey_probe(struct i2c_client *client, /* led device */ touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME; touchkey->led_dev.brightness = LED_FULL; - touchkey->led_dev.max_brightness = LED_FULL; + touchkey->led_dev.max_brightness = LED_ON; touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set; error = devm_led_classdev_register(&client->dev, &touchkey->led_dev); From ebcdaee4cebb3a8d0d702ab5e9392373672ec1de Mon Sep 17 00:00:00 2001 From: Jean-Philippe Brucker Date: Thu, 1 Jun 2017 19:22:01 +0100 Subject: [PATCH 0360/1065] dmaengine: pl330: fix warning in pl330_remove When removing a device with less than 9 IRQs (AMBA_NR_IRQS), we'll get a big WARN_ON from devres.c because pl330_remove calls devm_free_irqs for unallocated irqs. Similarly to pl330_probe, check that IRQ number is present before calling devm_free_irq. Signed-off-by: Jean-Philippe Brucker Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 8b0da7fa520d..e90a7a0d760a 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -3008,7 +3008,8 @@ static int pl330_remove(struct amba_device *adev) for (i = 0; i < AMBA_NR_IRQS; i++) { irq = adev->irq[i]; - devm_free_irq(&adev->dev, irq, pl330); + if (irq) + devm_free_irq(&adev->dev, irq, pl330); } dma_async_device_unregister(&pl330->ddma); From 55b644fd2431cfd28d04cc28f092d49e7bea3433 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 6 May 2017 19:37:45 +0200 Subject: [PATCH 0361/1065] usb: dwc2: add support for the DWC2 controller on Meson8 SoCs USB support in the Meson8 SoCs is provided by a DWC2 controller which works with the same settings as Meson8b and GXBB. Using the generic "snps,dwc2" binding results in an endless stream of "Overcurrent change detected" messages. Acked-by: Rob Herring Signed-off-by: Martin Blumenstingl Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/dwc2.txt | 1 + drivers/usb/dwc2/params.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 00bea038639e..fcf199b64d3d 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -10,6 +10,7 @@ Required properties: - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; + - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs; - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs; - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs; - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs; diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 9cd8722f24f6..a3ffe97170ff 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -144,6 +144,8 @@ const struct of_device_id dwc2_of_match_table[] = { { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params }, { .compatible = "snps,dwc2" }, { .compatible = "samsung,s3c6400-hsotg" }, + { .compatible = "amlogic,meson8-usb", + .data = dwc2_set_amlogic_params }, { .compatible = "amlogic,meson8b-usb", .data = dwc2_set_amlogic_params }, { .compatible = "amlogic,meson-gxbb-usb", From dc9217b69dd6089dcfeb86ed4b3c671504326087 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Thu, 11 May 2017 17:26:48 -0700 Subject: [PATCH 0362/1065] usb: gadget: f_mass_storage: Serialize wake and sleep execution f_mass_storage has a memorry barrier issue with the sleep and wake functions that can cause a deadlock. This results in intermittent hangs during MSC file transfer. The host will reset the device after receiving no response to resume the transfer. This issue is seen when dwc3 is processing 2 transfer-in-progress events at the same time, invoking completion handlers for CSW and CBW. Also this issue occurs depending on the system timing and latency. To increase the chance to hit this issue, you can force dwc3 driver to wait and process those 2 events at once by adding a small delay (~100us) in dwc3_check_event_buf() whenever the request is for CSW and read the event count again. Avoid debugging with printk and ftrace as extra delays and memory barrier will mask this issue. Scenario which can lead to failure: ----------------------------------- 1) The main thread sleeps and waits for the next command in get_next_command(). 2) bulk_in_complete() wakes up main thread for CSW. 3) bulk_out_complete() tries to wake up the running main thread for CBW. 4) thread_wakeup_needed is not loaded with correct value in sleep_thread(). 5) Main thread goes to sleep again. The pattern is shown below. Note the 2 critical variables. * common->thread_wakeup_needed * bh->state CPU 0 (sleep_thread) CPU 1 (wakeup_thread) ============================== =============================== bh->state = BH_STATE_FULL; smp_wmb(); thread_wakeup_needed = 0; thread_wakeup_needed = 1; smp_rmb(); if (bh->state != BH_STATE_FULL) sleep again ... As pointed out by Alan Stern, this is an R-pattern issue. The issue can be seen when there are two wakeups in quick succession. The thread_wakeup_needed can be overwritten in sleep_thread, and the read of the bh->state maybe reordered before the write to thread_wakeup_needed. This patch applies full memory barrier smp_mb() in both sleep_thread() and wakeup_thread() to ensure the order which the thread_wakeup_needed and bh->state are written and loaded. However, a better solution in the future would be to use wait_queue method that takes care of managing memory barrier between waker and waiter. Cc: Acked-by: Alan Stern Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_mass_storage.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 4c8aacc232c0..74d57d6994da 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -396,7 +396,11 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) /* Caller must hold fsg->lock */ static void wakeup_thread(struct fsg_common *common) { - smp_wmb(); /* ensure the write of bh->state is complete */ + /* + * Ensure the reading of thread_wakeup_needed + * and the writing of bh->state are completed + */ + smp_mb(); /* Tell the main thread that something has happened */ common->thread_wakeup_needed = 1; if (common->thread_task) @@ -627,7 +631,12 @@ static int sleep_thread(struct fsg_common *common, bool can_freeze) } __set_current_state(TASK_RUNNING); common->thread_wakeup_needed = 0; - smp_rmb(); /* ensure the latest bh->state is visible */ + + /* + * Ensure the writing of thread_wakeup_needed + * and the reading of bh->state are completed + */ + smp_mb(); return rc; } From cdc876877ebc3f0677b267756d4564e2a429e730 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 26 Apr 2017 20:50:07 +0900 Subject: [PATCH 0363/1065] usb: gadget: udc: renesas_usb3: fix pm_runtime functions calling This patch fixes an issue that this driver is possible to access the registers before pm_runtime_get_sync() if a gadget driver is installed first. After that, oops happens on R-Car Gen3 environment. To avoid it, this patch changes the pm_runtime call timing from probe/remove to udc_start/udc_stop. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/renesas_usb3.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 5a2d845fb1a6..10585da8e360 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -1799,6 +1799,9 @@ static int renesas_usb3_start(struct usb_gadget *gadget, /* hook up the driver */ usb3->driver = driver; + pm_runtime_enable(usb3_to_dev(usb3)); + pm_runtime_get_sync(usb3_to_dev(usb3)); + renesas_usb3_init_controller(usb3); return 0; @@ -1816,6 +1819,9 @@ static int renesas_usb3_stop(struct usb_gadget *gadget) renesas_usb3_stop_controller(usb3); spin_unlock_irqrestore(&usb3->lock, flags); + pm_runtime_put(usb3_to_dev(usb3)); + pm_runtime_disable(usb3_to_dev(usb3)); + return 0; } @@ -1891,9 +1897,6 @@ static int renesas_usb3_remove(struct platform_device *pdev) device_remove_file(&pdev->dev, &dev_attr_role); - pm_runtime_put(&pdev->dev); - pm_runtime_disable(&pdev->dev); - usb_del_gadget_udc(&usb3->gadget); __renesas_usb3_ep_free_request(usb3->ep0_req); @@ -2099,9 +2102,6 @@ static int renesas_usb3_probe(struct platform_device *pdev) usb3->workaround_for_vbus = priv->workaround_for_vbus; - pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); - dev_info(&pdev->dev, "probed\n"); return 0; From 067d6fdc558d2c43f0bfdc7af99630dd5eb08dc5 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 26 Apr 2017 20:50:08 +0900 Subject: [PATCH 0364/1065] usb: gadget: udc: renesas_usb3: fix deadlock by spinlock This patch fixes an issue that this driver is possible to cause deadlock by double-spinclocked in renesas_usb3_stop_controller(). So, this patch removes spinlock API calling in renesas_usb3_stop(). (In other words, the previous code had a redundant lock.) Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/renesas_usb3.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 10585da8e360..e27d948617e2 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -1810,14 +1810,11 @@ static int renesas_usb3_start(struct usb_gadget *gadget, static int renesas_usb3_stop(struct usb_gadget *gadget) { struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget); - unsigned long flags; - spin_lock_irqsave(&usb3->lock, flags); usb3->softconnect = false; usb3->gadget.speed = USB_SPEED_UNKNOWN; usb3->driver = NULL; renesas_usb3_stop_controller(usb3); - spin_unlock_irqrestore(&usb3->lock, flags); pm_runtime_put(usb3_to_dev(usb3)); pm_runtime_disable(usb3_to_dev(usb3)); From 940f538a100c84c6e72813e4ac88bd1753a86945 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 26 Apr 2017 20:50:09 +0900 Subject: [PATCH 0365/1065] usb: gadget: udc: renesas_usb3: lock for PN_ registers access This controller disallows to change the PIPE until reading/writing a packet finishes. However. the previous code is not enough to hold the lock in some functions. So, this patch fixes it. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/renesas_usb3.c | 28 ++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index e27d948617e2..c05097b5661e 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -1475,7 +1475,13 @@ static void usb3_request_done_pipen(struct renesas_usb3 *usb3, struct renesas_usb3_request *usb3_req, int status) { - usb3_pn_stop(usb3); + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + if (usb3_pn_change(usb3, usb3_ep->num)) + usb3_pn_stop(usb3); + spin_unlock_irqrestore(&usb3->lock, flags); + usb3_disable_pipe_irq(usb3, usb3_ep->num); usb3_request_done(usb3_ep, usb3_req, status); @@ -1504,30 +1510,46 @@ static void usb3_irq_epc_pipen_bfrdy(struct renesas_usb3 *usb3, int num) { struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num); struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); + bool done = false; if (!usb3_req) return; + spin_lock(&usb3->lock); + if (usb3_pn_change(usb3, num)) + goto out; + if (usb3_ep->dir_in) { /* Do not stop the IN pipe here to detect LSTTR interrupt */ if (!usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE)) usb3_clear_bit(usb3, PN_INT_BFRDY, USB3_PN_INT_ENA); } else { if (!usb3_read_pipe(usb3_ep, usb3_req, USB3_PN_READ)) - usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0); + done = true; } + +out: + /* need to unlock because usb3_request_done_pipen() locks it */ + spin_unlock(&usb3->lock); + + if (done) + usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0); } static void usb3_irq_epc_pipen(struct renesas_usb3 *usb3, int num) { u32 pn_int_sta; - if (usb3_pn_change(usb3, num) < 0) + spin_lock(&usb3->lock); + if (usb3_pn_change(usb3, num) < 0) { + spin_unlock(&usb3->lock); return; + } pn_int_sta = usb3_read(usb3, USB3_PN_INT_STA); pn_int_sta &= usb3_read(usb3, USB3_PN_INT_ENA); usb3_write(usb3, pn_int_sta, USB3_PN_INT_STA); + spin_unlock(&usb3->lock); if (pn_int_sta & PN_INT_LSTTR) usb3_irq_epc_pipen_lsttr(usb3, num); if (pn_int_sta & PN_INT_BFRDY) From afbbc7913a288c29616bd31ae612548f6475151a Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 26 Apr 2017 20:50:10 +0900 Subject: [PATCH 0366/1065] usb: gadget: udc: renesas_usb3: Fix PN_INT_ENA disabling timing The PN_INT_ENA register should be used after usb3_pn_change() is called. So, this patch moves the access from renesas_usb3_stop_controller() to usb3_disable_pipe_n(). Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/renesas_usb3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index c05097b5661e..cd4c88529721 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -623,7 +623,6 @@ static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3) { usb3_disconnect(usb3); usb3_write(usb3, 0, USB3_P0_INT_ENA); - usb3_write(usb3, 0, USB3_PN_INT_ENA); usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA); usb3_write(usb3, 0, USB3_USB_INT_ENA_1); usb3_write(usb3, 0, USB3_USB_INT_ENA_2); @@ -1682,6 +1681,7 @@ static int usb3_disable_pipe_n(struct renesas_usb3_ep *usb3_ep) spin_lock_irqsave(&usb3->lock, flags); if (!usb3_pn_change(usb3, usb3_ep->num)) { + usb3_write(usb3, 0, USB3_PN_INT_ENA); usb3_write(usb3, 0, USB3_PN_RAMMAP); usb3_clear_bit(usb3, PN_CON_EN, USB3_PN_CON); } From 715e944f8a7a1059db5d61ebf197e6f348d747e2 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Tue, 30 May 2017 22:39:46 +0200 Subject: [PATCH 0367/1065] HID: asus: Stop underlying hardware on remove We are missing a call to hid_hw_stop() on the remove hook. Among other things this is causing an Oops when (re-)starting GNOME / upowerd / ... after the module has been already rmmod-ed. Signed-off-by: Carlo Caione Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-asus.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 101ab2e63d18..a6268f2f7408 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -537,6 +537,8 @@ static void asus_remove(struct hid_device *hdev) drvdata->kbd_backlight->removed = true; cancel_work_sync(&drvdata->kbd_backlight->work); } + + hid_hw_stop(hdev); } static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc, From e385050873d1e19e40481d8cd868c9f60ebe46ac Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Wed, 24 May 2017 10:26:29 +0200 Subject: [PATCH 0368/1065] s390/zcrypt: Fix blocking queue device after unbind/bind. When the association between a queue device and the driver is released via unbind and later re-associated the queue device was not operational any more. Reason was a wrong administration of the card/queue lists within the ap device driver. This patch introduces revised card/queue list handling within the ap device driver: when an ap device is detected it is initial not added to the card/queue list any more. With driver probe the card device is added to the card list/the queue device is added to the queue list within a card. With driver remove the device is removed from the card/queue list. Additionally there are some situations within the ap device live where the lists need update upon card/queue device release (for example device hot unplug or suspend/resume). Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 38 +++++++++++++++++++++------------- drivers/s390/crypto/ap_card.c | 9 +++++++- drivers/s390/crypto/ap_queue.c | 9 +++++++- 3 files changed, 40 insertions(+), 16 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 9be4596d8a08..ea099910b4e9 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -668,10 +668,28 @@ static int ap_device_probe(struct device *dev) struct ap_driver *ap_drv = to_ap_drv(dev->driver); int rc; + /* Add queue/card to list of active queues/cards */ + spin_lock_bh(&ap_list_lock); + if (is_card_dev(dev)) + list_add(&to_ap_card(dev)->list, &ap_card_list); + else + list_add(&to_ap_queue(dev)->list, + &to_ap_queue(dev)->card->queues); + spin_unlock_bh(&ap_list_lock); + ap_dev->drv = ap_drv; rc = ap_drv->probe ? ap_drv->probe(ap_dev) : -ENODEV; - if (rc) + + if (rc) { + spin_lock_bh(&ap_list_lock); + if (is_card_dev(dev)) + list_del_init(&to_ap_card(dev)->list); + else + list_del_init(&to_ap_queue(dev)->list); + spin_unlock_bh(&ap_list_lock); ap_dev->drv = NULL; + } + return rc; } @@ -680,14 +698,17 @@ static int ap_device_remove(struct device *dev) struct ap_device *ap_dev = to_ap_dev(dev); struct ap_driver *ap_drv = ap_dev->drv; + if (ap_drv->remove) + ap_drv->remove(ap_dev); + + /* Remove queue/card from list of active queues/cards */ spin_lock_bh(&ap_list_lock); if (is_card_dev(dev)) list_del_init(&to_ap_card(dev)->list); else list_del_init(&to_ap_queue(dev)->list); spin_unlock_bh(&ap_list_lock); - if (ap_drv->remove) - ap_drv->remove(ap_dev); + return 0; } @@ -1056,10 +1077,6 @@ static void ap_scan_bus(struct work_struct *unused) } /* get it and thus adjust reference counter */ get_device(&ac->ap_dev.device); - /* Add card device to card list */ - spin_lock_bh(&ap_list_lock); - list_add(&ac->list, &ap_card_list); - spin_unlock_bh(&ap_list_lock); } /* now create the new queue device */ aq = ap_queue_create(qid, type); @@ -1070,10 +1087,6 @@ static void ap_scan_bus(struct work_struct *unused) aq->ap_dev.device.parent = &ac->ap_dev.device; dev_set_name(&aq->ap_dev.device, "%02x.%04x", id, dom); - /* Add queue device to card queue list */ - spin_lock_bh(&ap_list_lock); - list_add(&aq->list, &ac->queues); - spin_unlock_bh(&ap_list_lock); /* Start with a device reset */ spin_lock_bh(&aq->lock); ap_wait(ap_sm_event(aq, AP_EVENT_POLL)); @@ -1081,9 +1094,6 @@ static void ap_scan_bus(struct work_struct *unused) /* Register device */ rc = device_register(&aq->ap_dev.device); if (rc) { - spin_lock_bh(&ap_list_lock); - list_del_init(&aq->list); - spin_unlock_bh(&ap_list_lock); put_device(&aq->ap_dev.device); continue; } diff --git a/drivers/s390/crypto/ap_card.c b/drivers/s390/crypto/ap_card.c index cfa161ccc74e..836efac96813 100644 --- a/drivers/s390/crypto/ap_card.c +++ b/drivers/s390/crypto/ap_card.c @@ -160,7 +160,14 @@ static struct device_type ap_card_type = { static void ap_card_device_release(struct device *dev) { - kfree(to_ap_card(dev)); + struct ap_card *ac = to_ap_card(dev); + + if (!list_empty(&ac->list)) { + spin_lock_bh(&ap_list_lock); + list_del_init(&ac->list); + spin_unlock_bh(&ap_list_lock); + } + kfree(ac); } struct ap_card *ap_card_create(int id, int queue_depth, int device_type, diff --git a/drivers/s390/crypto/ap_queue.c b/drivers/s390/crypto/ap_queue.c index 480c58a63769..0f1a5d02acb0 100644 --- a/drivers/s390/crypto/ap_queue.c +++ b/drivers/s390/crypto/ap_queue.c @@ -584,7 +584,14 @@ static struct device_type ap_queue_type = { static void ap_queue_device_release(struct device *dev) { - kfree(to_ap_queue(dev)); + struct ap_queue *aq = to_ap_queue(dev); + + if (!list_empty(&aq->list)) { + spin_lock_bh(&ap_list_lock); + list_del_init(&aq->list); + spin_unlock_bh(&ap_list_lock); + } + kfree(aq); } struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type) From cb7cf772d83d2d4e6995c5bb9e0fb59aea8f7080 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Fri, 26 May 2017 17:40:02 +0100 Subject: [PATCH 0369/1065] ARM64/ACPI: Fix BAD_MADT_GICC_ENTRY() macro implementation The BAD_MADT_GICC_ENTRY() macro checks if a GICC MADT entry passes muster from an ACPI specification standpoint. Current macro detects the MADT GICC entry length through ACPI firmware version (it changed from 76 to 80 bytes in the transition from ACPI 5.1 to ACPI 6.0 specification) but always uses (erroneously) the ACPICA (latest) struct (ie struct acpi_madt_generic_interrupt - that is 80-bytes long) length to check if the current GICC entry memory record exceeds the MADT table end in memory as defined by the MADT table header itself, which may result in false negatives depending on the ACPI firmware version and how the MADT entries are laid out in memory (ie on ACPI 5.1 firmware MADT GICC entries are 76 bytes long, so by adding 80 to a GICC entry start address in memory the resulting address may well be past the actual MADT end, triggering a false negative). Fix the BAD_MADT_GICC_ENTRY() macro by reshuffling the condition checks and update them to always use the firmware version specific MADT GICC entry length in order to carry out boundary checks. Fixes: b6cfb277378e ("ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro") Reported-by: Julien Grall Acked-by: Will Deacon Acked-by: Marc Zyngier Signed-off-by: Lorenzo Pieralisi Cc: Julien Grall Cc: Hanjun Guo Cc: Al Stone Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/acpi.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 0e99978da3f0..59cca1d6ec54 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -23,9 +23,9 @@ #define ACPI_MADT_GICC_LENGTH \ (acpi_gbl_FADT.header.revision < 6 ? 76 : 80) -#define BAD_MADT_GICC_ENTRY(entry, end) \ - (!(entry) || (unsigned long)(entry) + sizeof(*(entry)) > (end) || \ - (entry)->header.length != ACPI_MADT_GICC_LENGTH) +#define BAD_MADT_GICC_ENTRY(entry, end) \ + (!(entry) || (entry)->header.length != ACPI_MADT_GICC_LENGTH || \ + (unsigned long)(entry) + ACPI_MADT_GICC_LENGTH > (end)) /* Basic configuration for ACPI */ #ifdef CONFIG_ACPI From 918c7b062a0f9198d9503cfece0210c1743c0f88 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 22 May 2017 18:00:16 -0700 Subject: [PATCH 0370/1065] perf stat: Only print NMI watchdog hint when enabled Only print the NMI watchdog hint when that watchdog it actually enabled. This avoids printing these unnecessarily. Signed-off-by: Andi Kleen Acked-by: Jiri Olsa Link: http://lkml.kernel.org/n/tip-lnw7edxnqsphkmeew857wz1i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index a935b5023732..ad9324d1daf9 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -1578,6 +1578,7 @@ static void print_header(int argc, const char **argv) static void print_footer(void) { FILE *output = stat_config.output; + int n; if (!null_run) fprintf(output, "\n"); @@ -1590,7 +1591,9 @@ static void print_footer(void) } fprintf(output, "\n\n"); - if (print_free_counters_hint) + if (print_free_counters_hint && + sysctl__read_int("kernel/nmi_watchdog", &n) >= 0 && + n > 0) fprintf(output, "Some events weren't counted. Try disabling the NMI watchdog:\n" " echo 0 > /proc/sys/kernel/nmi_watchdog\n" From d31353cd753c443ace5723d6878a39f393a0c136 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 1 Jun 2017 18:02:39 -0700 Subject: [PATCH 0371/1065] net: systemport: Fix missing Wake-on-LAN interrupt for SYSTEMPORT Lite On SYSTEMPORT Lite, since we have the main interrupt source in the first cell, the second cell is the Wake-on-LAN interrupt, yet the code was not properly updated to fetch the second cell, and instead looked at the third and non-existing cell for Wake-on-LAN. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 099b374c1b17..5274501428e4 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -2026,9 +2026,12 @@ static int bcm_sysport_probe(struct platform_device *pdev) priv->num_rx_desc_words = params->num_rx_desc_words; priv->irq0 = platform_get_irq(pdev, 0); - if (!priv->is_lite) + if (!priv->is_lite) { priv->irq1 = platform_get_irq(pdev, 1); - priv->wol_irq = platform_get_irq(pdev, 2); + priv->wol_irq = platform_get_irq(pdev, 2); + } else { + priv->wol_irq = platform_get_irq(pdev, 1); + } if (priv->irq0 <= 0 || (priv->irq1 <= 0 && !priv->is_lite)) { dev_err(&pdev->dev, "invalid interrupts\n"); ret = -EINVAL; From ac2629a4797fdc839f7a4775cc141e6f53e064cf Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 1 Jun 2017 19:53:04 -0700 Subject: [PATCH 0372/1065] net: dsa: Move dsa_switch_{suspend,resume} out of legacy.c dsa_switch_suspend() and dsa_switch_resume() are functions that belong in net/dsa/dsa.c and are not part of the legacy platform support code. Fixes: a6a71f19fe5e ("net: dsa: isolate legacy code") Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- net/dsa/dsa.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ net/dsa/legacy.c | 47 ----------------------------------------------- 2 files changed, 47 insertions(+), 47 deletions(-) diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c index 26130ae438da..90038d45a547 100644 --- a/net/dsa/dsa.c +++ b/net/dsa/dsa.c @@ -223,6 +223,53 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev, return 0; } +#ifdef CONFIG_PM_SLEEP +int dsa_switch_suspend(struct dsa_switch *ds) +{ + int i, ret = 0; + + /* Suspend slave network devices */ + for (i = 0; i < ds->num_ports; i++) { + if (!dsa_is_port_initialized(ds, i)) + continue; + + ret = dsa_slave_suspend(ds->ports[i].netdev); + if (ret) + return ret; + } + + if (ds->ops->suspend) + ret = ds->ops->suspend(ds); + + return ret; +} +EXPORT_SYMBOL_GPL(dsa_switch_suspend); + +int dsa_switch_resume(struct dsa_switch *ds) +{ + int i, ret = 0; + + if (ds->ops->resume) + ret = ds->ops->resume(ds); + + if (ret) + return ret; + + /* Resume slave network devices */ + for (i = 0; i < ds->num_ports; i++) { + if (!dsa_is_port_initialized(ds, i)) + continue; + + ret = dsa_slave_resume(ds->ports[i].netdev); + if (ret) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(dsa_switch_resume); +#endif + static struct packet_type dsa_pack_type __read_mostly = { .type = cpu_to_be16(ETH_P_XDSA), .func = dsa_switch_rcv, diff --git a/net/dsa/legacy.c b/net/dsa/legacy.c index ad345c8b0b06..7281098df04e 100644 --- a/net/dsa/legacy.c +++ b/net/dsa/legacy.c @@ -289,53 +289,6 @@ static void dsa_switch_destroy(struct dsa_switch *ds) dsa_switch_unregister_notifier(ds); } -#ifdef CONFIG_PM_SLEEP -int dsa_switch_suspend(struct dsa_switch *ds) -{ - int i, ret = 0; - - /* Suspend slave network devices */ - for (i = 0; i < ds->num_ports; i++) { - if (!dsa_is_port_initialized(ds, i)) - continue; - - ret = dsa_slave_suspend(ds->ports[i].netdev); - if (ret) - return ret; - } - - if (ds->ops->suspend) - ret = ds->ops->suspend(ds); - - return ret; -} -EXPORT_SYMBOL_GPL(dsa_switch_suspend); - -int dsa_switch_resume(struct dsa_switch *ds) -{ - int i, ret = 0; - - if (ds->ops->resume) - ret = ds->ops->resume(ds); - - if (ret) - return ret; - - /* Resume slave network devices */ - for (i = 0; i < ds->num_ports; i++) { - if (!dsa_is_port_initialized(ds, i)) - continue; - - ret = dsa_slave_resume(ds->ports[i].netdev); - if (ret) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(dsa_switch_resume); -#endif - /* platform driver init and cleanup *****************************************/ static int dev_is_class(struct device *dev, void *class) { From 75fb636324a839c2c31be9f81644034c6142e469 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 1 Jun 2017 13:54:30 +0200 Subject: [PATCH 0373/1065] drm: Fix oops + Xserver hang when unplugging USB drm devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit a39be606f99d ("drm: Do a full device unregister when unplugging") causes backtraces like this one when unplugging an usb drm device while it is in use: usb 2-3: USB disconnect, device number 25 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:424 drm_mode_config_cleanup+0x220/0x280 [drm] ... RIP: 0010:drm_mode_config_cleanup+0x220/0x280 [drm] ... Call Trace: gm12u320_modeset_cleanup+0xe/0x10 [gm12u320] gm12u320_driver_unload+0x35/0x70 [gm12u320] drm_dev_unregister+0x3c/0xe0 [drm] drm_unplug_dev+0x12/0x60 [drm] gm12u320_usb_disconnect+0x36/0x40 [gm12u320] usb_unbind_interface+0x72/0x280 device_release_driver_internal+0x158/0x210 device_release_driver+0x12/0x20 bus_remove_device+0x104/0x180 device_del+0x1d2/0x350 usb_disable_device+0x9f/0x270 usb_disconnect+0xc6/0x260 ... [drm:drm_mode_config_cleanup [drm]] *ERROR* connector Unknown-1 leaked! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:458 drm_mode_config_cleanup+0x268/0x280 [drm] ... ---[ end trace 80df975dae439ed6 ]--- general protection fault: 0000 [#1] SMP ... Call Trace: ? __switch_to+0x225/0x450 drm_mode_rmfb_work_fn+0x55/0x70 [drm] process_one_work+0x193/0x3c0 worker_thread+0x4a/0x3a0 ... RIP: drm_framebuffer_remove+0x62/0x3f0 [drm] RSP: ffffb776c39dfd98 ---[ end trace 80df975dae439ed7 ]--- After which the system is unusable this is caused by drm_dev_unregister getting called immediately on unplug, which calls the drivers unload function which calls drm_mode_config_cleanup which removes the framebuffer object while userspace is still holding a reference to it. Reverting commit a39be606f99d ("drm: Do a full device unregister when unplugging") leads to the following oops on unplug instead, when userspace closes the last fd referencing the drm_dev: sysfs group 'power' not found for kobject 'card1-Unknown-1' ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2459 at fs/sysfs/group.c:237 sysfs_remove_group+0x80/0x90 ... RIP: 0010:sysfs_remove_group+0x80/0x90 ... Call Trace: dpm_sysfs_remove+0x57/0x60 device_del+0xfd/0x350 device_unregister+0x1a/0x60 drm_sysfs_connector_remove+0x39/0x50 [drm] drm_connector_unregister+0x5a/0x70 [drm] drm_connector_unregister_all+0x45/0xa0 [drm] drm_modeset_unregister_all+0x12/0x30 [drm] drm_dev_unregister+0xca/0xe0 [drm] drm_put_dev+0x32/0x60 [drm] drm_release+0x2f3/0x380 [drm] __fput+0xdf/0x1e0 ... ---[ end trace ecfb91ac85688bbe ]--- BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 IP: down_write+0x1f/0x40 ... Call Trace: debugfs_remove_recursive+0x55/0x1b0 drm_debugfs_connector_remove+0x21/0x40 [drm] drm_connector_unregister+0x62/0x70 [drm] drm_connector_unregister_all+0x45/0xa0 [drm] drm_modeset_unregister_all+0x12/0x30 [drm] drm_dev_unregister+0xca/0xe0 [drm] drm_put_dev+0x32/0x60 [drm] drm_release+0x2f3/0x380 [drm] __fput+0xdf/0x1e0 ... ---[ end trace ecfb91ac85688bbf ]--- This is caused by the revert moving back to drm_unplug_dev calling drm_minor_unregister which does: device_del(minor->kdev); dev_set_drvdata(minor->kdev, NULL); /* safety belt */ drm_debugfs_cleanup(minor); Causing the sysfs entries to already be removed even though we still have references to them in e.g. drm_connector. Note we must call drm_minor_unregister to notify userspace of the unplug of the device, so calling drm_dev_unregister is not completely wrong the problem is that drm_dev_unregister does too much. This commit fixes drm_unplug_dev by not only reverting commit a39be606f99d ("drm: Do a full device unregister when unplugging") but by also adding a call to drm_modeset_unregister_all before the drm_minor_unregister calls to make sure all sysfs entries are removed before calling device_del(minor->kdev) thereby also fixing the second set of oopses caused by just reverting the commit. Fixes: a39be606f99d ("drm: Do a full device unregister when unplugging") Cc: stable@vger.kernel.org Cc: Chris Wilson Cc: Jeffy Cc: Marco Diego Aurélio Mesquita Reported-by: Marco Diego Aurélio Mesquita Signed-off-by: Hans de Goede Reviewed-by: Chris Wilson Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/20170601115430.4113-1-hdegoede@redhat.com --- drivers/gpu/drm/drm_drv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index b5c6bb46a425..37b8ad3e30d8 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -358,7 +358,12 @@ EXPORT_SYMBOL(drm_put_dev); void drm_unplug_dev(struct drm_device *dev) { /* for a USB device */ - drm_dev_unregister(dev); + if (drm_core_check_feature(dev, DRIVER_MODESET)) + drm_modeset_unregister_all(dev); + + drm_minor_unregister(dev, DRM_MINOR_PRIMARY); + drm_minor_unregister(dev, DRM_MINOR_RENDER); + drm_minor_unregister(dev, DRM_MINOR_CONTROL); mutex_lock(&drm_global_mutex); From 6e80ac5cc992ab6256c3dae87f7e57db15e1a58c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 31 May 2017 13:15:41 +0100 Subject: [PATCH 0374/1065] ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt() xfrm6_find_1stfragopt() may now return an error code and we must not treat it as a length. Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options") Signed-off-by: Ben Hutchings Acked-by: Craig Gallek Signed-off-by: David S. Miller --- net/ipv6/xfrm6_mode_ro.c | 2 ++ net/ipv6/xfrm6_mode_transport.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/net/ipv6/xfrm6_mode_ro.c b/net/ipv6/xfrm6_mode_ro.c index 0e015906f9ca..07d36573f50b 100644 --- a/net/ipv6/xfrm6_mode_ro.c +++ b/net/ipv6/xfrm6_mode_ro.c @@ -47,6 +47,8 @@ static int xfrm6_ro_output(struct xfrm_state *x, struct sk_buff *skb) iph = ipv6_hdr(skb); hdr_len = x->type->hdr_offset(x, skb, &prevhdr); + if (hdr_len < 0) + return hdr_len; skb_set_mac_header(skb, (prevhdr - x->props.header_len) - skb->data); skb_set_network_header(skb, -x->props.header_len); skb->transport_header = skb->network_header + hdr_len; diff --git a/net/ipv6/xfrm6_mode_transport.c b/net/ipv6/xfrm6_mode_transport.c index 7a92c0f31912..9ad07a91708e 100644 --- a/net/ipv6/xfrm6_mode_transport.c +++ b/net/ipv6/xfrm6_mode_transport.c @@ -30,6 +30,8 @@ static int xfrm6_transport_output(struct xfrm_state *x, struct sk_buff *skb) skb_set_inner_transport_header(skb, skb_transport_offset(skb)); hdr_len = x->type->hdr_offset(x, skb, &prevhdr); + if (hdr_len < 0) + return hdr_len; skb_set_mac_header(skb, (prevhdr - x->props.header_len) - skb->data); skb_set_network_header(skb, -x->props.header_len); skb->transport_header = skb->network_header + hdr_len; From e7519f9926f1d0d11c776eb0475eb098c7760f68 Mon Sep 17 00:00:00 2001 From: Ganesh Goudar Date: Wed, 31 May 2017 18:26:28 +0530 Subject: [PATCH 0375/1065] cxgb4: avoid enabling napi twice to the same queue Take uld mutex to avoid race between cxgb_up() and cxgb4_register_uld() to enable napi for the same uld queue. Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index b512149684fd..77ed2f628f9c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -2196,10 +2196,14 @@ static int cxgb_up(struct adapter *adap) if (err) goto irq_err; } + + mutex_lock(&uld_mutex); enable_rx(adap); t4_sge_start(adap); t4_intr_enable(adap); adap->flags |= FULL_INIT_DONE; + mutex_unlock(&uld_mutex); + notify_ulds(adap, CXGB4_STATE_UP); #if IS_ENABLED(CONFIG_IPV6) update_clip(adap); From 44abafc4cc094214a99f860f778c48ecb23422fc Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Wed, 31 May 2017 11:21:27 -0700 Subject: [PATCH 0376/1065] tcp: disallow cwnd undo when switching congestion control When the sender switches its congestion control during loss recovery, if the recovery is spurious then it may incorrectly revert cwnd and ssthresh to the older values set by a previous congestion control. Consider a congestion control (like BBR) that does not use ssthresh and keeps it infinite: the connection may incorrectly revert cwnd to an infinite value when switching from BBR to another congestion control. This patch fixes it by disallowing such cwnd undo operation upon switching congestion control. Note that undo_marker is not reset s.t. the packets that were incorrectly marked lost would be corrected. We only avoid undoing the cwnd in tcp_undo_cwnd_reduction(). Signed-off-by: Yuchung Cheng Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_cong.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c index 6e3c512054a6..324c9bcc5456 100644 --- a/net/ipv4/tcp_cong.c +++ b/net/ipv4/tcp_cong.c @@ -180,6 +180,7 @@ void tcp_init_congestion_control(struct sock *sk) { const struct inet_connection_sock *icsk = inet_csk(sk); + tcp_sk(sk)->prior_ssthresh = 0; if (icsk->icsk_ca_ops->init) icsk->icsk_ca_ops->init(sk); if (tcp_ca_needs_ecn(sk)) From 77032732d0e89b83c3bca75b857a1f63e9efb44b Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Wed, 31 May 2017 14:28:47 -0500 Subject: [PATCH 0377/1065] net: ethernet: stmmac: Fix altr_tse_pcs SGMII Initialization Fix NETDEV WATCHDOG timeout on startup by adding missing register writes that properly setup SGMII. Signed-off-by: Thor Thayer Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c index 489ef146201e..6a9c954492f2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c +++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c @@ -37,6 +37,7 @@ #define TSE_PCS_CONTROL_AN_EN_MASK BIT(12) #define TSE_PCS_CONTROL_REG 0x00 #define TSE_PCS_CONTROL_RESTART_AN_MASK BIT(9) +#define TSE_PCS_CTRL_AUTONEG_SGMII 0x1140 #define TSE_PCS_IF_MODE_REG 0x28 #define TSE_PCS_LINK_TIMER_0_REG 0x24 #define TSE_PCS_LINK_TIMER_1_REG 0x26 @@ -65,6 +66,7 @@ #define TSE_PCS_SW_RESET_TIMEOUT 100 #define TSE_PCS_USE_SGMII_AN_MASK BIT(1) #define TSE_PCS_USE_SGMII_ENA BIT(0) +#define TSE_PCS_IF_USE_SGMII 0x03 #define SGMII_ADAPTER_CTRL_REG 0x00 #define SGMII_ADAPTER_DISABLE 0x0001 @@ -101,7 +103,9 @@ int tse_pcs_init(void __iomem *base, struct tse_pcs *pcs) { int ret = 0; - writew(TSE_PCS_USE_SGMII_ENA, base + TSE_PCS_IF_MODE_REG); + writew(TSE_PCS_IF_USE_SGMII, base + TSE_PCS_IF_MODE_REG); + + writew(TSE_PCS_CTRL_AUTONEG_SGMII, base + TSE_PCS_CONTROL_REG); writew(TSE_PCS_SGMII_LINK_TIMER_0, base + TSE_PCS_LINK_TIMER_0_REG); writew(TSE_PCS_SGMII_LINK_TIMER_1, base + TSE_PCS_LINK_TIMER_1_REG); From 78b07ac1e4c8acc9daf6b7f7b579300328673640 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Thu, 1 Jun 2017 15:32:34 -0500 Subject: [PATCH 0378/1065] ibmvnic: Remove module author mailing address The original author left the project and so far has not responded to emails sent to the listed address. Signed-off-by: John Allen Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 4f2d329dba99..a93757c255f7 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -81,7 +81,7 @@ static const char ibmvnic_driver_name[] = "ibmvnic"; static const char ibmvnic_driver_string[] = "IBM System i/p Virtual NIC Driver"; -MODULE_AUTHOR("Santiago Leon "); +MODULE_AUTHOR("Santiago Leon"); MODULE_DESCRIPTION("IBM System i/p Virtual NIC Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(IBMVNIC_DRIVER_VERSION); From a53cb29b0af346af44e4abf13d7e59f807fba690 Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Fri, 2 Jun 2017 03:24:08 +0300 Subject: [PATCH 0379/1065] vxlan: fix use-after-free on deletion Adding a vxlan interface to a socket isn't symmetrical, while adding is done in vxlan_open() the deletion is done in vxlan_dellink(). This can cause a use-after-free error when we close the vxlan interface before deleting it. We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call it from vxlan_stop() to match the call from vxlan_open(). Fixes: 56ef9c909b40 ("vxlan: Move socket initialization to within rtnl scope") Acked-by: Jiri Benc Tested-by: Roi Dayan Signed-off-by: Mark Bloch Acked-by: Roopa Prabhu Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 5c1d69e37870..a6b5052c1d36 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -59,6 +59,8 @@ static const u8 all_zeros_mac[ETH_ALEN + 2]; static int vxlan_sock_add(struct vxlan_dev *vxlan); +static void vxlan_vs_del_dev(struct vxlan_dev *vxlan); + /* per-network namespace private data for this module */ struct vxlan_net { struct list_head vxlan_list; @@ -1081,6 +1083,8 @@ static void vxlan_sock_release(struct vxlan_dev *vxlan) rcu_assign_pointer(vxlan->vn4_sock, NULL); synchronize_net(); + vxlan_vs_del_dev(vxlan); + if (__vxlan_sock_release_prep(sock4)) { udp_tunnel_sock_release(sock4->sock); kfree(sock4); @@ -2356,6 +2360,15 @@ static void vxlan_cleanup(unsigned long arg) mod_timer(&vxlan->age_timer, next_timer); } +static void vxlan_vs_del_dev(struct vxlan_dev *vxlan) +{ + struct vxlan_net *vn = net_generic(vxlan->net, vxlan_net_id); + + spin_lock(&vn->sock_lock); + hlist_del_init_rcu(&vxlan->hlist); + spin_unlock(&vn->sock_lock); +} + static void vxlan_vs_add_dev(struct vxlan_sock *vs, struct vxlan_dev *vxlan) { struct vxlan_net *vn = net_generic(vxlan->net, vxlan_net_id); @@ -3300,15 +3313,9 @@ static int vxlan_changelink(struct net_device *dev, struct nlattr *tb[], static void vxlan_dellink(struct net_device *dev, struct list_head *head) { struct vxlan_dev *vxlan = netdev_priv(dev); - struct vxlan_net *vn = net_generic(vxlan->net, vxlan_net_id); vxlan_flush(vxlan, true); - spin_lock(&vn->sock_lock); - if (!hlist_unhashed(&vxlan->hlist)) - hlist_del_rcu(&vxlan->hlist); - spin_unlock(&vn->sock_lock); - gro_cells_destroy(&vxlan->gro_cells); list_del(&vxlan->next); unregister_netdevice_queue(dev, head); From 4bd7ef0b033721b659b9357057e76d1ced95c1da Mon Sep 17 00:00:00 2001 From: "Chopra, Manish" Date: Fri, 2 Jun 2017 06:52:54 -0700 Subject: [PATCH 0380/1065] qlcnic: Fix tunnel offload for 82xx adapters Qlogic's 82xx series adapter doesn't support tunnel offloads, driver incorrectly assumes that it is supported and causes firmware hang while running tunnel IO. This patch fixes this by not advertising tunnel offloads for 82xx adapters. Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 26 +++++++++++++++++-- .../ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 2 ++ .../net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 ++ .../qlogic/qlcnic/qlcnic_sriov_common.c | 2 ++ 4 files changed, 30 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 7245b1072518..81312924df14 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1824,22 +1824,44 @@ struct qlcnic_hardware_ops { u32 (*get_cap_size)(void *, int); void (*set_sys_info)(void *, int, u32); void (*store_cap_mask)(void *, u32); + bool (*encap_rx_offload) (struct qlcnic_adapter *adapter); + bool (*encap_tx_offload) (struct qlcnic_adapter *adapter); }; extern struct qlcnic_nic_template qlcnic_vf_ops; -static inline bool qlcnic_encap_tx_offload(struct qlcnic_adapter *adapter) +static inline bool qlcnic_83xx_encap_tx_offload(struct qlcnic_adapter *adapter) { return adapter->ahw->extra_capability[0] & QLCNIC_83XX_FW_CAPAB_ENCAP_TX_OFFLOAD; } -static inline bool qlcnic_encap_rx_offload(struct qlcnic_adapter *adapter) +static inline bool qlcnic_83xx_encap_rx_offload(struct qlcnic_adapter *adapter) { return adapter->ahw->extra_capability[0] & QLCNIC_83XX_FW_CAPAB_ENCAP_RX_OFFLOAD; } +static inline bool qlcnic_82xx_encap_tx_offload(struct qlcnic_adapter *adapter) +{ + return false; +} + +static inline bool qlcnic_82xx_encap_rx_offload(struct qlcnic_adapter *adapter) +{ + return false; +} + +static inline bool qlcnic_encap_rx_offload(struct qlcnic_adapter *adapter) +{ + return adapter->ahw->hw_ops->encap_rx_offload(adapter); +} + +static inline bool qlcnic_encap_tx_offload(struct qlcnic_adapter *adapter) +{ + return adapter->ahw->hw_ops->encap_tx_offload(adapter); +} + static inline int qlcnic_start_firmware(struct qlcnic_adapter *adapter) { return adapter->nic_ops->start_firmware(adapter); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 4fb68797630e..f7080d0ab874 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -242,6 +242,8 @@ static struct qlcnic_hardware_ops qlcnic_83xx_hw_ops = { .get_cap_size = qlcnic_83xx_get_cap_size, .set_sys_info = qlcnic_83xx_set_sys_info, .store_cap_mask = qlcnic_83xx_store_cap_mask, + .encap_rx_offload = qlcnic_83xx_encap_rx_offload, + .encap_tx_offload = qlcnic_83xx_encap_tx_offload, }; static struct qlcnic_nic_template qlcnic_83xx_ops = { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index b6628aaa6e4a..1b5f7d57b6f8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -632,6 +632,8 @@ static struct qlcnic_hardware_ops qlcnic_hw_ops = { .get_cap_size = qlcnic_82xx_get_cap_size, .set_sys_info = qlcnic_82xx_set_sys_info, .store_cap_mask = qlcnic_82xx_store_cap_mask, + .encap_rx_offload = qlcnic_82xx_encap_rx_offload, + .encap_tx_offload = qlcnic_82xx_encap_tx_offload, }; static int qlcnic_check_multi_tx_capability(struct qlcnic_adapter *adapter) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 2f656f395f39..c58180f40844 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -77,6 +77,8 @@ static struct qlcnic_hardware_ops qlcnic_sriov_vf_hw_ops = { .free_mac_list = qlcnic_sriov_vf_free_mac_list, .enable_sds_intr = qlcnic_83xx_enable_sds_intr, .disable_sds_intr = qlcnic_83xx_disable_sds_intr, + .encap_rx_offload = qlcnic_83xx_encap_rx_offload, + .encap_tx_offload = qlcnic_83xx_encap_tx_offload, }; static struct qlcnic_nic_template qlcnic_sriov_vf_ops = { From f0c3192ceee3c16154e70dfb373f66ed86c6fea9 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 2 Jun 2017 17:54:33 +0300 Subject: [PATCH 0381/1065] virtio_net: lower limit on buffer size commit d85b758f72b0 ("virtio_net: fix support for small rings") was supposed to increase the buffer size for small rings but had an unintentional side effect of decreasing it for large rings. This seems to break some setups - it's not yet clear why, but increasing buffer size back to what it was before helps. Fixes: d85b758f72b0 ("virtio_net: fix support for small rings") Reported-by: Mikulas Patocka Reported-by: "J. Bruce Fields" Tested-by: Mikulas Patocka Tested-by: "J. Bruce Fields" Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 3e9246cc49c3..a871f45ecc79 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -869,7 +869,7 @@ static unsigned int get_mergeable_buf_len(struct receive_queue *rq, unsigned int len; len = hdr_len + clamp_t(unsigned int, ewma_pkt_len_read(avg_pkt_len), - rq->min_buf_len - hdr_len, PAGE_SIZE - hdr_len); + rq->min_buf_len, PAGE_SIZE - hdr_len); return ALIGN(len, L1_CACHE_BYTES); } @@ -2144,7 +2144,8 @@ static unsigned int mergeable_min_buf_len(struct virtnet_info *vi, struct virtqu unsigned int buf_len = hdr_len + ETH_HLEN + VLAN_HLEN + packet_len; unsigned int min_buf_len = DIV_ROUND_UP(buf_len, rq_size); - return max(min_buf_len, hdr_len); + return max(max(min_buf_len, hdr_len) - hdr_len, + (unsigned int)GOOD_PACKET_LEN); } static int virtnet_find_vqs(struct virtnet_info *vi) From e0f8e8cf3bf9305f36155a5ac6e16b3b910e6cec Mon Sep 17 00:00:00 2001 From: Varun Prakash Date: Sat, 27 May 2017 20:22:51 +0530 Subject: [PATCH 0382/1065] scsi: cxgb4i: libcxgbi: in error case RST tcp conn If logout response is not received and ->ep_disconnect() is called then close tcp conn by RST instead of FIN to cleanup conn resources immediately. Also move ->csk_push_tx_frames() above 'done:' to avoid calling ->csk_push_tx_frames() in error cases. Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen --- drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 1 - drivers/scsi/cxgbi/libcxgbi.c | 29 ++++++++++++++++++++++------- drivers/scsi/cxgbi/libcxgbi.h | 1 + 3 files changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c index 1076c1578322..0aae094ab91c 100644 --- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c +++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c @@ -1595,7 +1595,6 @@ static void release_offload_resources(struct cxgbi_sock *csk) cxgbi_sock_put(csk); } csk->dst = NULL; - csk->cdev = NULL; } static int init_act_open(struct cxgbi_sock *csk) diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index fb06974c88c1..e4c83b7c96a8 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -867,7 +867,8 @@ static void need_active_close(struct cxgbi_sock *csk) log_debug(1 << CXGBI_DBG_SOCK, "csk 0x%p,%u,0x%lx,%u.\n", csk, (csk)->state, (csk)->flags, (csk)->tid); spin_lock_bh(&csk->lock); - dst_confirm(csk->dst); + if (csk->dst) + dst_confirm(csk->dst); data_lost = skb_queue_len(&csk->receive_queue); __skb_queue_purge(&csk->receive_queue); @@ -882,7 +883,8 @@ static void need_active_close(struct cxgbi_sock *csk) } if (close_req) { - if (data_lost) + if (!cxgbi_sock_flag(csk, CTPF_LOGOUT_RSP_RCVD) || + data_lost) csk->cdev->csk_send_abort_req(csk); else csk->cdev->csk_send_close_req(csk); @@ -1186,9 +1188,10 @@ static int cxgbi_sock_send_pdus(struct cxgbi_sock *csk, struct sk_buff *skb) cxgbi_ulp_extra_len(cxgbi_skcb_ulp_mode(skb)); skb = next; } -done: + if (likely(skb_queue_len(&csk->write_queue))) cdev->csk_push_tx_frames(csk, 1); +done: spin_unlock_bh(&csk->lock); return copied; @@ -1568,9 +1571,12 @@ static inline int read_pdu_skb(struct iscsi_conn *conn, } } -static int skb_read_pdu_bhs(struct iscsi_conn *conn, struct sk_buff *skb) +static int +skb_read_pdu_bhs(struct cxgbi_sock *csk, struct iscsi_conn *conn, + struct sk_buff *skb) { struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + int err; log_debug(1 << CXGBI_DBG_PDU_RX, "conn 0x%p, skb 0x%p, len %u, flag 0x%lx.\n", @@ -1608,7 +1614,16 @@ static int skb_read_pdu_bhs(struct iscsi_conn *conn, struct sk_buff *skb) } } - return read_pdu_skb(conn, skb, 0, 0); + err = read_pdu_skb(conn, skb, 0, 0); + if (likely(err >= 0)) { + struct iscsi_hdr *hdr = (struct iscsi_hdr *)skb->data; + u8 opcode = hdr->opcode & ISCSI_OPCODE_MASK; + + if (unlikely(opcode == ISCSI_OP_LOGOUT_RSP)) + cxgbi_sock_set_flag(csk, CTPF_LOGOUT_RSP_RCVD); + } + + return err; } static int skb_read_pdu_data(struct iscsi_conn *conn, struct sk_buff *lskb, @@ -1713,7 +1728,7 @@ void cxgbi_conn_pdu_ready(struct cxgbi_sock *csk) cxgbi_skcb_rx_pdulen(skb)); if (cxgbi_skcb_test_flag(skb, SKCBF_RX_COALESCED)) { - err = skb_read_pdu_bhs(conn, skb); + err = skb_read_pdu_bhs(csk, conn, skb); if (err < 0) { pr_err("coalesced bhs, csk 0x%p, skb 0x%p,%u, " "f 0x%lx, plen %u.\n", @@ -1731,7 +1746,7 @@ void cxgbi_conn_pdu_ready(struct cxgbi_sock *csk) cxgbi_skcb_flags(skb), cxgbi_skcb_rx_pdulen(skb)); } else { - err = skb_read_pdu_bhs(conn, skb); + err = skb_read_pdu_bhs(csk, conn, skb); if (err < 0) { pr_err("bhs, csk 0x%p, skb 0x%p,%u, " "f 0x%lx, plen %u.\n", diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h index 239462a75760..37f07aaab1e4 100644 --- a/drivers/scsi/cxgbi/libcxgbi.h +++ b/drivers/scsi/cxgbi/libcxgbi.h @@ -187,6 +187,7 @@ enum cxgbi_sock_flags { CTPF_HAS_ATID, /* reserved atid */ CTPF_HAS_TID, /* reserved hw tid */ CTPF_OFFLOAD_DOWN, /* offload function off */ + CTPF_LOGOUT_RSP_RCVD, /* received logout response */ }; struct cxgbi_skb_rx_cb { From a7306c3436e9c8e584a4b9fad5f3dc91be2a6076 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 2 Jun 2017 14:46:11 -0700 Subject: [PATCH 0383/1065] ksm: prevent crash after write_protect_page fails "err" needs to be left set to -EFAULT if split_huge_page succeeds. Otherwise if "err" gets clobbered with zero and write_protect_page fails, try_to_merge_one_page() will succeed instead of returning -EFAULT and then try_to_merge_with_ksm_page() will continue thinking kpage is a PageKsm when in fact it's still an anonymous page. Eventually it'll crash in page_add_anon_rmap. This has been reproduced on Fedora25 kernel but I can reproduce with upstream too. The bug was introduced in commit f765f540598a ("ksm: prepare to new THP semantics") introduced in v4.5. page:fffff67546ce1cc0 count:4 mapcount:2 mapping:ffffa094551e36e1 index:0x7f0f46673 flags: 0x2ffffc0004007c(referenced|uptodate|dirty|lru|active|swapbacked) page dumped because: VM_BUG_ON_PAGE(!PageLocked(page)) page->mem_cgroup:ffffa09674bf0000 ------------[ cut here ]------------ kernel BUG at mm/rmap.c:1222! CPU: 1 PID: 76 Comm: ksmd Not tainted 4.9.3-200.fc25.x86_64 #1 RIP: do_page_add_anon_rmap+0x1c4/0x240 Call Trace: page_add_anon_rmap+0x18/0x20 try_to_merge_with_ksm_page+0x50b/0x780 ksm_scan_thread+0x1211/0x1410 ? prepare_to_wait_event+0x100/0x100 ? try_to_merge_with_ksm_page+0x780/0x780 kthread+0xd9/0xf0 ? kthread_park+0x60/0x60 ret_from_fork+0x25/0x30 Fixes: f765f54059 ("ksm: prepare to new THP semantics") Link: http://lkml.kernel.org/r/20170513131040.21732-1-aarcange@redhat.com Signed-off-by: Andrea Arcangeli Reported-by: Federico Simoncelli Acked-by: Kirill A. Shutemov Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/ksm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/ksm.c b/mm/ksm.c index d9fc0e456128..216184af0e19 100644 --- a/mm/ksm.c +++ b/mm/ksm.c @@ -1028,8 +1028,7 @@ static int try_to_merge_one_page(struct vm_area_struct *vma, goto out; if (PageTransCompound(page)) { - err = split_huge_page(page); - if (err) + if (split_huge_page(page)) goto out_unlock; } From 1bde33e051233f0ed93a8bc67137016ab38c3d2d Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 2 Jun 2017 14:46:13 -0700 Subject: [PATCH 0384/1065] include/linux/gfp.h: fix ___GFP_NOLOCKDEP value Igor Stoppa has noticed that __GFP_NOLOCKDEP can use a lower bit. At the time commit 7e7844226f10 ("lockdep: allow to disable reclaim lockup detection") was written we still had __GFP_OTHER_NODE but I have removed it in commit 41b6167e8f74 ("mm: get rid of __GFP_OTHER_NODE") and forgot to lower the bit value. The current value is outside of __GFP_BITS_SHIFT so it cannot be used actually. Fixes: 7e7844226f10 ("lockdep: allow to disable reclaim lockup detection") Signed-off-by: Michal Hocko Reported-by: Igor Stoppa Acked-by: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 2b1a44f5bdb6..a89d37e8b387 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -41,7 +41,7 @@ struct vm_area_struct; #define ___GFP_WRITE 0x800000u #define ___GFP_KSWAPD_RECLAIM 0x1000000u #ifdef CONFIG_LOCKDEP -#define ___GFP_NOLOCKDEP 0x4000000u +#define ___GFP_NOLOCKDEP 0x2000000u #else #define ___GFP_NOLOCKDEP 0 #endif From 60b0a8c3d2480f3b57282b47b7cae7ee71c48635 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Fri, 2 Jun 2017 14:46:16 -0700 Subject: [PATCH 0385/1065] frv: declare jiffies to be located in the .data section Commit 7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp") removed a section specification from the jiffies declaration that caused conflicts on some platforms. Unfortunately this change broke the build for frv: kernel/built-in.o: In function `__do_softirq': (.text+0x6460): relocation truncated to fit: R_FRV_GPREL12 against symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1 kernel/built-in.o: In function `__do_softirq': (.text+0x6574): relocation truncated to fit: R_FRV_GPREL12 against symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1 kernel/built-in.o: In function `pwq_activate_delayed_work': workqueue.c:(.text+0x15b9c): relocation truncated to fit: R_FRV_GPREL12 against symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1 ... Add __jiffy_arch_data to the declaration of jiffies and use it on frv to include the section specification. For all other platforms __jiffy_arch_data (currently) has no effect. Fixes: 7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp") Link: http://lkml.kernel.org/r/20170516221333.177280-1-mka@chromium.org Signed-off-by: Matthias Kaehlcke Reported-by: Guenter Roeck Tested-by: Guenter Roeck Reviewed-by: David Howells Cc: Sudip Mukherjee Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/include/asm/timex.h | 6 ++++++ include/linux/jiffies.h | 6 +++++- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/frv/include/asm/timex.h b/arch/frv/include/asm/timex.h index a89bddefdacf..139093fab326 100644 --- a/arch/frv/include/asm/timex.h +++ b/arch/frv/include/asm/timex.h @@ -16,5 +16,11 @@ static inline cycles_t get_cycles(void) #define vxtime_lock() do {} while (0) #define vxtime_unlock() do {} while (0) +/* This attribute is used in include/linux/jiffies.h alongside with + * __cacheline_aligned_in_smp. It is assumed that __cacheline_aligned_in_smp + * for frv does not contain another section specification. + */ +#define __jiffy_arch_data __attribute__((__section__(".data"))) + #endif diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 36872fbb815d..734377ad42e9 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -64,13 +64,17 @@ extern int register_refined_jiffies(long clock_tick_rate); /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */ #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ) +#ifndef __jiffy_arch_data +#define __jiffy_arch_data +#endif + /* * The 64-bit value is not atomic - you MUST NOT read it * without sampling the sequence number in jiffies_lock. * get_jiffies_64() will do this for you as appropriate. */ extern u64 __cacheline_aligned_in_smp jiffies_64; -extern unsigned long volatile __cacheline_aligned_in_smp jiffies; +extern unsigned long volatile __cacheline_aligned_in_smp __jiffy_arch_data jiffies; #if (BITS_PER_LONG < 64) u64 get_jiffies_64(void); From 4f4f2ba9c531b3d7cee293dd3654ba3b86e7d220 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 2 Jun 2017 14:46:19 -0700 Subject: [PATCH 0386/1065] mm: clarify why we want kmalloc before falling backto vmallock While converting drm_[cm]alloc* helpers to kvmalloc* variants Chris Wilson has wondered why we want to try kmalloc before vmalloc fallback even for larger allocations requests. Let's clarify that one larger physically contiguous block is less likely to fragment memory than many scattered pages which can prevent more large blocks from being created. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170517080932.21423-1-mhocko@kernel.org Signed-off-by: Michal Hocko Suggested-by: Chris Wilson Reviewed-by: Chris Wilson Acked-by: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/util.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/mm/util.c b/mm/util.c index 464df3489903..26be6407abd7 100644 --- a/mm/util.c +++ b/mm/util.c @@ -357,8 +357,11 @@ void *kvmalloc_node(size_t size, gfp_t flags, int node) WARN_ON_ONCE((flags & GFP_KERNEL) != GFP_KERNEL); /* - * Make sure that larger requests are not too disruptive - no OOM - * killer and no allocation failure warnings as we have a fallback + * We want to attempt a large physically contiguous block first because + * it is less likely to fragment multiple larger blocks and therefore + * contribute to a long term fragmentation less than vmalloc fallback. + * However make sure that larger requests are not too disruptive - no + * OOM killer and no allocation failure warnings as we have a fallback. */ if (size > PAGE_SIZE) { kmalloc_flags |= __GFP_NOWARN; From 57ddfdaa9a72fe726a44d26d99db31bc137dbeff Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 2 Jun 2017 14:46:22 -0700 Subject: [PATCH 0387/1065] initramfs: fix disabling of initramfs (and its compression) Commit db2aa7fd15e8 ("initramfs: allow again choice of the embedded initram compression algorithm") introduced the possibility to select the initramfs compression algorithm from Kconfig and while this is a nice feature it broke the use case described below. Here is what my build system does: - kernel is initially configured not to have an initramfs included - build the user space root file system - re-configure the kernel to have an initramfs included (CONFIG_INITRAMFS_SOURCE="/path/to/romfs") and set relevant CONFIG_INITRAMFS options, in my case, no compression option (CONFIG_INITRAMFS_COMPRESSION_NONE) - kernel is re-built with these options -> kernel+initramfs image is copied - kernel is re-built again without these options -> kernel image is copied Building a kernel without an initramfs means setting this option: CONFIG_INITRAMFS_SOURCE="" (and this one only) whereas building a kernel with an initramfs means setting these options: CONFIG_INITRAMFS_SOURCE="/home/fainelli/work/uclinux-rootfs/romfs /home/fainelli/work/uclinux-rootfs/misc/initramfs.dev" CONFIG_INITRAMFS_ROOT_UID=1000 CONFIG_INITRAMFS_ROOT_GID=1000 CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_INITRAMFS_COMPRESSION="" Commit db2aa7fd15e85 ("initramfs: allow again choice of the embedded initram compression algorithm") is problematic because CONFIG_INITRAMFS_COMPRESSION which is used to determine the initramfs_data.cpio extension/compression is a string, and due to how Kconfig works it will evaluate in order, how to assign it. Setting CONFIG_INITRAMFS_COMPRESSION_NONE with CONFIG_INITRAMFS_SOURCE="" cannot possibly work (because of the depends on INITRAMFS_SOURCE!="" imposed on CONFIG_INITRAMFS_COMPRESSION ) yet we still get CONFIG_INITRAMFS_COMPRESSION assigned to ".gz" because CONFIG_RD_GZIP=y is set in my kernel, even when there is no initramfs being built. So we basically end-up generating two initramfs_data.cpio* files, one without extension, and one with .gz. This causes usr/Makefile to track usr/initramfs_data.cpio.gz, and not usr/initramfs_data.cpio anymore, that is also largely problematic after 9e3596b0c6539e ("kbuild: initramfs cleanup, set target from Kconfig") because we used to track all possible initramfs_data files in the $(targets) variable before that commit. The end result is that the kernel with an initramfs clearly does not contain what we expect it to, it has a stale initramfs_data.cpio file built into it, and we keep re-generating an initramfs_data.cpio.gz file which is not the one that we want to include in the kernel image proper. The fix consists in hiding CONFIG_INITRAMFS_COMPRESSION when CONFIG_INITRAMFS_SOURCE="". This puts us back in a state to the pre-4.10 behavior where we can properly disable and re-enable initramfs within the same kernel .config file, and be in control of what CONFIG_INITRAMFS_COMPRESSION is set to. Fixes: db2aa7fd15e8 ("initramfs: allow again choice of the embedded initram compression algorithm") Fixes: 9e3596b0c653 ("kbuild: initramfs cleanup, set target from Kconfig") Link: http://lkml.kernel.org/r/20170521033337.6197-1-f.fainelli@gmail.com Signed-off-by: Florian Fainelli Acked-by: Nicholas Piggin Cc: P J P Cc: Paul Bolle Cc: Michal Marek Cc: Daniel Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- usr/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/usr/Kconfig b/usr/Kconfig index c0c48507e44e..ad0543e21760 100644 --- a/usr/Kconfig +++ b/usr/Kconfig @@ -220,6 +220,7 @@ config INITRAMFS_COMPRESSION_LZ4 endchoice config INITRAMFS_COMPRESSION + depends on INITRAMFS_SOURCE!="" string default "" if INITRAMFS_COMPRESSION_NONE default ".gz" if INITRAMFS_COMPRESSION_GZIP From 478fe3037b2278d276d4cd9cd0ab06c4cb2e9b32 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 Jun 2017 14:46:25 -0700 Subject: [PATCH 0388/1065] slub/memcg: cure the brainless abuse of sysfs attributes memcg_propagate_slab_attrs() abuses the sysfs attribute file functions to propagate settings from the root kmem_cache to a newly created kmem_cache. It does that with: attr->show(root, buf); attr->store(new, buf, strlen(bug); Aside of being a lazy and absurd hackery this is broken because it does not check the return value of the show() function. Some of the show() functions return 0 w/o touching the buffer. That means in such a case the store function is called with the stale content of the previous show(). That causes nonsense like invoking kmem_cache_shrink() on a newly created kmem_cache. In the worst case it would cause handing in an uninitialized buffer. This should be rewritten proper by adding a propagate() callback to those slub_attributes which must be propagated and avoid that insane conversion to and from ASCII, but that's too large for a hot fix. Check at least the return value of the show() function, so calling store() with stale content is prevented. Steven said: "It can cause a deadlock with get_online_cpus() that has been uncovered by recent cpu hotplug and lockdep changes that Thomas and Peter have been doing. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(slab_mutex); lock(cpu_hotplug.lock); lock(slab_mutex); *** DEADLOCK ***" Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705201244540.2255@nanos Signed-off-by: Thomas Gleixner Reported-by: Steven Rostedt Acked-by: David Rientjes Cc: Johannes Weiner Cc: Michal Hocko Cc: Peter Zijlstra Cc: Christoph Lameter Cc: Pekka Enberg Cc: Joonsoo Kim Cc: Christoph Hellwig Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index 57e5156f02be..7449593fca72 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5512,6 +5512,7 @@ static void memcg_propagate_slab_attrs(struct kmem_cache *s) char mbuf[64]; char *buf; struct slab_attribute *attr = to_slab_attr(slab_attrs[i]); + ssize_t len; if (!attr || !attr->store || !attr->show) continue; @@ -5536,8 +5537,9 @@ static void memcg_propagate_slab_attrs(struct kmem_cache *s) buf = buffer; } - attr->show(root_cache, buf); - attr->store(s, buf, strlen(buf)); + len = attr->show(root_cache, buf); + if (len > 0) + attr->store(s, buf, len); } if (buffer) From ff5a20169b98d84ad8d7f99f27c5ebbb008204d6 Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Fri, 2 Jun 2017 14:46:28 -0700 Subject: [PATCH 0389/1065] pcmcia: remove left-over %Z format Commit 5b5e0928f742 ("lib/vsprintf.c: remove %Z support") removed some usages of format %Z but forgot "%.2Zx". This makes clang 4.0 reports a -Wformat-extra-args warning because it does not know about %Z. Replace %Z with %z. Link: http://lkml.kernel.org/r/20170520090946.22562-1-nicolas.iooss_linux@m4x.org Signed-off-by: Nicolas Iooss Cc: Harald Welte Cc: Alexey Dobriyan Cc: [4.11+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/pcmcia/cm4040_cs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index d4dbd8d8e524..382c864814d9 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -374,7 +374,7 @@ static ssize_t cm4040_write(struct file *filp, const char __user *buf, rc = write_sync_reg(SCR_HOST_TO_READER_START, dev); if (rc <= 0) { - DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc); + DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc); DEBUGP(2, dev, "<- cm4040_write (failed)\n"); if (rc == -ERESTARTSYS) return rc; @@ -387,7 +387,7 @@ static ssize_t cm4040_write(struct file *filp, const char __user *buf, for (i = 0; i < bytes_to_write; i++) { rc = wait_for_bulk_out_ready(dev); if (rc <= 0) { - DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2Zx\n", + DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2zx\n", rc); DEBUGP(2, dev, "<- cm4040_write (failed)\n"); if (rc == -ERESTARTSYS) @@ -403,7 +403,7 @@ static ssize_t cm4040_write(struct file *filp, const char __user *buf, rc = write_sync_reg(SCR_HOST_TO_READER_DONE, dev); if (rc <= 0) { - DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc); + DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc); DEBUGP(2, dev, "<- cm4040_write (failed)\n"); if (rc == -ERESTARTSYS) return rc; From c288983dddf714216428774e022ad78f48dd8cb1 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Fri, 2 Jun 2017 14:46:31 -0700 Subject: [PATCH 0390/1065] mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once Roman Gushchin has reported that the OOM killer can trivially selects next OOM victim when a thread doing memory allocation from page fault path was selected as first OOM victim. allocate invoked oom-killer: gfp_mask=0x14280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), nodemask=(null), order=0, oom_score_adj=0 allocate cpuset=/ mems_allowed=0 CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x219/0x3e0 out_of_memory+0x11d/0x480 __alloc_pages_slowpath+0xc84/0xd40 __alloc_pages_nodemask+0x245/0x260 alloc_pages_vma+0xa2/0x270 __handle_mm_fault+0xca9/0x10c0 handle_mm_fault+0xf3/0x210 __do_page_fault+0x240/0x4e0 trace_do_page_fault+0x37/0xe0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 ... Out of memory: Kill process 492 (allocate) score 899 or sacrifice child Killed process 492 (allocate) total-vm:2052368kB, anon-rss:1894576kB, file-rss:4kB, shmem-rss:0kB allocate: page allocation failure: order:0, mode:0x14280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), nodemask=(null) allocate cpuset=/ mems_allowed=0 CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: __alloc_pages_slowpath+0xd32/0xd40 __alloc_pages_nodemask+0x245/0x260 alloc_pages_vma+0xa2/0x270 __handle_mm_fault+0xca9/0x10c0 handle_mm_fault+0xf3/0x210 __do_page_fault+0x240/0x4e0 trace_do_page_fault+0x37/0xe0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 ... oom_reaper: reaped process 492 (allocate), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB ... allocate invoked oom-killer: gfp_mask=0x0(), nodemask=(null), order=0, oom_score_adj=0 allocate cpuset=/ mems_allowed=0 CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x219/0x3e0 out_of_memory+0x11d/0x480 pagefault_out_of_memory+0x68/0x80 mm_fault_error+0x8f/0x190 ? handle_mm_fault+0xf3/0x210 __do_page_fault+0x4b2/0x4e0 trace_do_page_fault+0x37/0xe0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 ... Out of memory: Kill process 233 (firewalld) score 10 or sacrifice child Killed process 233 (firewalld) total-vm:246076kB, anon-rss:20956kB, file-rss:0kB, shmem-rss:0kB There is a race window that the OOM reaper completes reclaiming the first victim's memory while nothing but mutex_trylock() prevents the first victim from calling out_of_memory() from pagefault_out_of_memory() after memory allocation for page fault path failed due to being selected as an OOM victim. This is a side effect of commit 9a67f6488eca926f ("mm: consolidate GFP_NOFAIL checks in the allocator slowpath") because that commit silently changed the behavior from /* Avoid allocations with no watermarks from looping endlessly */ to /* * Give up allocations without trying memory reserves if selected * as an OOM victim */ in __alloc_pages_slowpath() by moving the location to check TIF_MEMDIE flag. I have noticed this change but I didn't post a patch because I thought it is an acceptable change other than noise by warn_alloc() because !__GFP_NOFAIL allocations are allowed to fail. But we overlooked that failing memory allocation from page fault path makes difference due to the race window explained above. While it might be possible to add a check to pagefault_out_of_memory() that prevents the first victim from calling out_of_memory() or remove out_of_memory() from pagefault_out_of_memory(), changing pagefault_out_of_memory() does not suppress noise by warn_alloc() when allocating thread was selected as an OOM victim. There is little point with printing similar backtraces and memory information from both out_of_memory() and warn_alloc(). Instead, if we guarantee that current thread can try allocations with no watermarks once when current thread looping inside __alloc_pages_slowpath() was selected as an OOM victim, we can follow "who can use memory reserves" rules and suppress noise by warn_alloc() and prevent memory allocations from page fault path from calling pagefault_out_of_memory(). If we take the comment literally, this patch would do - if (test_thread_flag(TIF_MEMDIE)) - goto nopage; + if (alloc_flags == ALLOC_NO_WATERMARKS || (gfp_mask & __GFP_NOMEMALLOC)) + goto nopage; because gfp_pfmemalloc_allowed() returns false if __GFP_NOMEMALLOC is given. But if I recall correctly (I couldn't find the message), the condition is meant to apply to only OOM victims despite the comment. Therefore, this patch preserves TIF_MEMDIE check. Fixes: 9a67f6488eca926f ("mm: consolidate GFP_NOFAIL checks in the allocator slowpath") Link: http://lkml.kernel.org/r/201705192112.IAF69238.OQOHSJLFOFFMtV@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa Reported-by: Roman Gushchin Tested-by: Roman Gushchin Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Cc: [4.11] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index f9e450c6b6e4..b7a6f583a373 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3870,7 +3870,9 @@ retry: goto got_pg; /* Avoid allocations with no watermarks from looping endlessly */ - if (test_thread_flag(TIF_MEMDIE)) + if (test_thread_flag(TIF_MEMDIE) && + (alloc_flags == ALLOC_NO_WATERMARKS || + (gfp_mask & __GFP_NOMEMALLOC))) goto nopage; /* Retry as long as the OOM killer is making progress */ From d0f0931de936a0a468d7e59284d39581c16d3a73 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Fri, 2 Jun 2017 14:46:34 -0700 Subject: [PATCH 0391/1065] mm: avoid spurious 'bad pmd' warning messages When the pmd_devmap() checks were added by 5c7fb56e5e3f ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd") to add better support for DAX huge pages, they were all added to the end of if() statements after existing pmd_trans_huge() checks. So, things like: - if (pmd_trans_huge(*pmd)) + if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd)) When further checks were added after pmd_trans_unstable() checks by commit 7267ec008b5c ("mm: postpone page table allocation until we have page to map") they were also added at the end of the conditional: + if (pmd_trans_unstable(fe->pmd) || pmd_devmap(*fe->pmd)) This ordering is fine for pmd_trans_huge(), but doesn't work for pmd_trans_unstable(). This is because DAX huge pages trip the bad_pmd() check inside of pmd_none_or_trans_huge_or_clear_bad() (called by pmd_trans_unstable()), which prints out a warning and returns 1. So, we do end up doing the right thing, but only after spamming dmesg with suspicious looking messages: mm/pgtable-generic.c:39: bad pmd ffff8808daa49b88(84000001006000a5) Reorder these checks in a helper so that pmd_devmap() is checked first, avoiding the error messages, and add a comment explaining why the ordering is important. Fixes: commit 7267ec008b5c ("mm: postpone page table allocation until we have page to map") Link: http://lkml.kernel.org/r/20170522215749.23516-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler Reviewed-by: Jan Kara Cc: Pawel Lebioda Cc: "Darrick J. Wong" Cc: Alexander Viro Cc: Christoph Hellwig Cc: Dan Williams Cc: Dave Hansen Cc: Matthew Wilcox Cc: "Kirill A . Shutemov" Cc: Dave Jiang Cc: Xiong Zhou Cc: Eryu Guan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 6ff5d729ded0..2e65df1831d9 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -3029,6 +3029,17 @@ static int __do_fault(struct vm_fault *vmf) return ret; } +/* + * The ordering of these checks is important for pmds with _PAGE_DEVMAP set. + * If we check pmd_trans_unstable() first we will trip the bad_pmd() check + * inside of pmd_none_or_trans_huge_or_clear_bad(). This will end up correctly + * returning 1 but not before it spams dmesg with the pmd_clear_bad() output. + */ +static int pmd_devmap_trans_unstable(pmd_t *pmd) +{ + return pmd_devmap(*pmd) || pmd_trans_unstable(pmd); +} + static int pte_alloc_one_map(struct vm_fault *vmf) { struct vm_area_struct *vma = vmf->vma; @@ -3052,18 +3063,27 @@ static int pte_alloc_one_map(struct vm_fault *vmf) map_pte: /* * If a huge pmd materialized under us just retry later. Use - * pmd_trans_unstable() instead of pmd_trans_huge() to ensure the pmd - * didn't become pmd_trans_huge under us and then back to pmd_none, as - * a result of MADV_DONTNEED running immediately after a huge pmd fault - * in a different thread of this mm, in turn leading to a misleading - * pmd_trans_huge() retval. All we have to ensure is that it is a - * regular pmd that we can walk with pte_offset_map() and we can do that - * through an atomic read in C, which is what pmd_trans_unstable() - * provides. + * pmd_trans_unstable() via pmd_devmap_trans_unstable() instead of + * pmd_trans_huge() to ensure the pmd didn't become pmd_trans_huge + * under us and then back to pmd_none, as a result of MADV_DONTNEED + * running immediately after a huge pmd fault in a different thread of + * this mm, in turn leading to a misleading pmd_trans_huge() retval. + * All we have to ensure is that it is a regular pmd that we can walk + * with pte_offset_map() and we can do that through an atomic read in + * C, which is what pmd_trans_unstable() provides. */ - if (pmd_trans_unstable(vmf->pmd) || pmd_devmap(*vmf->pmd)) + if (pmd_devmap_trans_unstable(vmf->pmd)) return VM_FAULT_NOPAGE; + /* + * At this point we know that our vmf->pmd points to a page of ptes + * and it cannot become pmd_none(), pmd_devmap() or pmd_trans_huge() + * for the duration of the fault. If a racing MADV_DONTNEED runs and + * we zap the ptes pointed to by our vmf->pmd, the vmf->ptl will still + * be valid and we will re-check to make sure the vmf->pte isn't + * pte_none() under vmf->ptl protection when we return to + * alloc_set_pte(). + */ vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address, &vmf->ptl); return 0; @@ -3690,7 +3710,7 @@ static int handle_pte_fault(struct vm_fault *vmf) vmf->pte = NULL; } else { /* See comment in pte_alloc_one_map() */ - if (pmd_trans_unstable(vmf->pmd) || pmd_devmap(*vmf->pmd)) + if (pmd_devmap_trans_unstable(vmf->pmd)) return 0; /* * A regular pmd is established and it can't morph into a huge From e2093926a098a8ccf0f1d10f6df8dad452cb28d3 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Fri, 2 Jun 2017 14:46:37 -0700 Subject: [PATCH 0392/1065] dax: fix race between colliding PMD & PTE entries We currently have two related PMD vs PTE races in the DAX code. These can both be easily triggered by having two threads reading and writing simultaneously to the same private mapping, with the key being that private mapping reads can be handled with PMDs but private mapping writes are always handled with PTEs so that we can COW. Here is the first race: CPU 0 CPU 1 (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK handle_pte_fault() passes check for pmd_devmap() (private mapping read) __handle_mm_fault() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD installed in our page tables at this spot. Here's the second race: CPU 0 CPU 1 (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() handle_pte_fault() dax_iomap_pte_fault() inserts PTE dax_iomap_pmd_fault() inserts PMD, but we already have a PTE at this spot. The core of the issue is that while there is isolation between faults to the same range in the DAX fault handlers via our DAX entry locking, there is no isolation between faults in the code in mm/memory.c. This means for instance that this code in __handle_mm_fault() can run: if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) { ret = create_huge_pmd(&vmf); But by the time we actually get to run the fault handler called by create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE fault has installed a normal PMD here as a parent. This is the cause of the 2nd race. The first race is similar - there is the following check in handle_pte_fault(): } else { /* See comment in pte_alloc_one_map() */ if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd)) return 0; So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we will bail and retry the fault. This is correct, but there is nothing preventing the PMD from being installed after this check but before we actually get to the DAX PTE fault handlers. In my testing these races result in the following types of errors: BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1 BUG: non-zero nr_ptes on freeing mm: 15 Fix this issue by having the DAX fault handlers verify that it is safe to continue their fault after they have taken an entry lock to block other racing faults. [ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries] Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler Reported-by: Pawel Lebioda Reviewed-by: Jan Kara Cc: "Darrick J. Wong" Cc: Alexander Viro Cc: Christoph Hellwig Cc: Dan Williams Cc: Dave Hansen Cc: Matthew Wilcox Cc: "Kirill A . Shutemov" Cc: Pawel Lebioda Cc: Dave Jiang Cc: Xiong Zhou Cc: Eryu Guan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/dax.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/fs/dax.c b/fs/dax.c index c22eaf162f95..2a6889b3585f 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -1154,6 +1154,17 @@ static int dax_iomap_pte_fault(struct vm_fault *vmf, goto out; } + /* + * It is possible, particularly with mixed reads & writes to private + * mappings, that we have raced with a PMD fault that overlaps with + * the PTE we need to set up. If so just return and the fault will be + * retried. + */ + if (pmd_trans_huge(*vmf->pmd) || pmd_devmap(*vmf->pmd)) { + vmf_ret = VM_FAULT_NOPAGE; + goto unlock_entry; + } + /* * Note that we don't bother to use iomap_apply here: DAX required * the file system block size to be equal the page size, which means @@ -1397,6 +1408,18 @@ static int dax_iomap_pmd_fault(struct vm_fault *vmf, if (IS_ERR(entry)) goto fallback; + /* + * It is possible, particularly with mixed reads & writes to private + * mappings, that we have raced with a PTE fault that overlaps with + * the PMD we need to set up. If so just return and the fault will be + * retried. + */ + if (!pmd_none(*vmf->pmd) && !pmd_trans_huge(*vmf->pmd) && + !pmd_devmap(*vmf->pmd)) { + result = 0; + goto unlock_entry; + } + /* * Note that we don't use iomap_apply here. We aren't doing I/O, only * setting up a mapping, so really we're using iomap_begin() as a way From 30809f559a0d348c2dfd7ab05e9a451e2384962e Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Fri, 2 Jun 2017 14:46:40 -0700 Subject: [PATCH 0393/1065] mm/migrate: fix refcount handling when !hugepage_migration_supported() On failing to migrate a page, soft_offline_huge_page() performs the necessary update to the hugepage ref-count. But when !hugepage_migration_supported() , unmap_and_move_hugepage() also decrements the page ref-count for the hugepage. The combined behaviour leaves the ref-count in an inconsistent state. This leads to soft lockups when running the overcommitted hugepage test from mce-tests suite. Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000 soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head) INFO: rcu_preempt detected stalls on CPUs/tasks: Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715 (detected by 7, t=5254 jiffies, g=963, c=962, q=321) thugetlb_overco R running task 0 2715 2685 0x00000008 Call trace: dump_backtrace+0x0/0x268 show_stack+0x24/0x30 sched_show_task+0x134/0x180 rcu_print_detail_task_stall_rnp+0x54/0x7c rcu_check_callbacks+0xa74/0xb08 update_process_times+0x34/0x60 tick_sched_handle.isra.7+0x38/0x70 tick_sched_timer+0x4c/0x98 __hrtimer_run_queues+0xc0/0x300 hrtimer_interrupt+0xac/0x228 arch_timer_handler_phys+0x3c/0x50 handle_percpu_devid_irq+0x8c/0x290 generic_handle_irq+0x34/0x50 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x5c/0xb0 Address this by changing the putback_active_hugepage() in soft_offline_huge_page() to putback_movable_pages(). This only triggers on systems that enable memory failure handling (ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration (!ARCH_ENABLE_HUGEPAGE_MIGRATION). I imagine this wasn't triggered as there aren't many systems running this configuration. [akpm@linux-foundation.org: remove dead comment, per Naoya] Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.com Reported-by: Manoj Iyer Tested-by: Manoj Iyer Suggested-by: Naoya Horiguchi Signed-off-by: Punit Agrawal Cc: Joonsoo Kim Cc: Wanpeng Li Cc: Christoph Lameter Cc: Mel Gorman Cc: [3.14+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 2527dfeddb00..342fac9ba89b 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1595,12 +1595,8 @@ static int soft_offline_huge_page(struct page *page, int flags) if (ret) { pr_info("soft offline: %#lx: migration failed %d, type %lx (%pGp)\n", pfn, ret, page->flags, &page->flags); - /* - * We know that soft_offline_huge_page() tries to migrate - * only one hugepage pointed to by hpage, so we need not - * run through the pagelist here. - */ - putback_active_hugepage(hpage); + if (!list_empty(&pagelist)) + putback_movable_pages(&pagelist); if (ret > 0) ret = -EIO; } else { From 70feee0e1ef331b22cc51f383d532a0d043fbdcc Mon Sep 17 00:00:00 2001 From: Yisheng Xie Date: Fri, 2 Jun 2017 14:46:43 -0700 Subject: [PATCH 0394/1065] mlock: fix mlock count can not decrease in race condition Kefeng reported that when running the follow test, the mlock count in meminfo will increase permanently: [1] testcase linux:~ # cat test_mlockal grep Mlocked /proc/meminfo for j in `seq 0 10` do for i in `seq 4 15` do ./p_mlockall >> log & done sleep 0.2 done # wait some time to let mlock counter decrease and 5s may not enough sleep 5 grep Mlocked /proc/meminfo linux:~ # cat p_mlockall.c #include #include #include #define SPACE_LEN 4096 int main(int argc, char ** argv) { int ret; void *adr = malloc(SPACE_LEN); if (!adr) return -1; ret = mlockall(MCL_CURRENT | MCL_FUTURE); printf("mlcokall ret = %d\n", ret); ret = munlockall(); printf("munlcokall ret = %d\n", ret); free(adr); return 0; } In __munlock_pagevec() we should decrement NR_MLOCK for each page where we clear the PageMlocked flag. Commit 1ebb7cc6a583 ("mm: munlock: batch NR_MLOCK zone state updates") has introduced a bug where we don't decrement NR_MLOCK for pages where we clear the flag, but fail to isolate them from the lru list (e.g. when the pages are on some other cpu's percpu pagevec). Since PageMlocked stays cleared, the NR_MLOCK accounting gets permanently disrupted by this. Fix it by counting the number of page whose PageMlock flag is cleared. Fixes: 1ebb7cc6a583 (" mm: munlock: batch NR_MLOCK zone state updates") Link: http://lkml.kernel.org/r/1495678405-54569-1-git-send-email-xieyisheng1@huawei.com Signed-off-by: Yisheng Xie Reported-by: Kefeng Wang Tested-by: Kefeng Wang Cc: Vlastimil Babka Cc: Joern Engel Cc: Mel Gorman Cc: Michel Lespinasse Cc: Hugh Dickins Cc: Rik van Riel Cc: Johannes Weiner Cc: Michal Hocko Cc: Xishi Qiu Cc: zhongjiang Cc: Hanjun Guo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mlock.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/mlock.c b/mm/mlock.c index c483c5c20b4b..b562b5523a65 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -284,7 +284,7 @@ static void __munlock_pagevec(struct pagevec *pvec, struct zone *zone) { int i; int nr = pagevec_count(pvec); - int delta_munlocked; + int delta_munlocked = -nr; struct pagevec pvec_putback; int pgrescued = 0; @@ -304,6 +304,8 @@ static void __munlock_pagevec(struct pagevec *pvec, struct zone *zone) continue; else __munlock_isolation_failed(page); + } else { + delta_munlocked++; } /* @@ -315,7 +317,6 @@ static void __munlock_pagevec(struct pagevec *pvec, struct zone *zone) pagevec_add(&pvec_putback, pvec->pages[i]); pvec->pages[i] = NULL; } - delta_munlocked = -nr + pagevec_count(&pvec_putback); __mod_zone_page_state(zone, NR_MLOCK, delta_munlocked); spin_unlock_irq(zone_lru_lock(zone)); From 9a291a7c9428155e8e623e4a3989f8be47134df5 Mon Sep 17 00:00:00 2001 From: James Morse Date: Fri, 2 Jun 2017 14:46:46 -0700 Subject: [PATCH 0395/1065] mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified KVM uses get_user_pages() to resolve its stage2 faults. KVM sets the FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it finds a VM_FAULT_HWPOISON. KVM handles these hwpoison pages as a special case. (check_user_page_hwpoison()) When huge pages are involved, this doesn't work so well. get_user_pages() calls follow_hugetlb_page(), which stops early if it receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning -EFAULT to the caller. The step to map this to -EHWPOISON based on the FOLL_ flags is missing. The hwpoison special case is skipped, and -EFAULT is returned to user-space, causing Qemu or kvmtool to exit. Instead, move this VM_FAULT_ to errno mapping code into a header file and use it from faultin_page() and follow_hugetlb_page(). With this, KVM works as expected. This isn't a problem for arm64 today as we haven't enabled MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86 too, so I think this should be a fix. This doesn't apply earlier than stable's v4.11.1 due to all sorts of cleanup. [james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()] suggested. Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.com Signed-off-by: James Morse Acked-by: Punit Agrawal Acked-by: Naoya Horiguchi Cc: "Kirill A . Shutemov" Cc: [4.11.1+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 11 +++++++++++ mm/gup.c | 20 ++++++++------------ mm/hugetlb.c | 5 +++++ 3 files changed, 24 insertions(+), 12 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index 7cb17c6b97de..b892e95d4929 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -2327,6 +2327,17 @@ static inline struct page *follow_page(struct vm_area_struct *vma, #define FOLL_REMOTE 0x2000 /* we are working on non-current tsk/mm */ #define FOLL_COW 0x4000 /* internal GUP flag */ +static inline int vm_fault_to_errno(int vm_fault, int foll_flags) +{ + if (vm_fault & VM_FAULT_OOM) + return -ENOMEM; + if (vm_fault & (VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE)) + return (foll_flags & FOLL_HWPOISON) ? -EHWPOISON : -EFAULT; + if (vm_fault & (VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV)) + return -EFAULT; + return 0; +} + typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr, void *data); extern int apply_to_page_range(struct mm_struct *mm, unsigned long address, diff --git a/mm/gup.c b/mm/gup.c index d9e6fddcc51f..b3c7214d710d 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -407,12 +407,10 @@ static int faultin_page(struct task_struct *tsk, struct vm_area_struct *vma, ret = handle_mm_fault(vma, address, fault_flags); if (ret & VM_FAULT_ERROR) { - if (ret & VM_FAULT_OOM) - return -ENOMEM; - if (ret & (VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE)) - return *flags & FOLL_HWPOISON ? -EHWPOISON : -EFAULT; - if (ret & (VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV)) - return -EFAULT; + int err = vm_fault_to_errno(ret, *flags); + + if (err) + return err; BUG(); } @@ -723,12 +721,10 @@ retry: ret = handle_mm_fault(vma, address, fault_flags); major |= ret & VM_FAULT_MAJOR; if (ret & VM_FAULT_ERROR) { - if (ret & VM_FAULT_OOM) - return -ENOMEM; - if (ret & (VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE)) - return -EHWPOISON; - if (ret & (VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV)) - return -EFAULT; + int err = vm_fault_to_errno(ret, 0); + + if (err) + return err; BUG(); } diff --git a/mm/hugetlb.c b/mm/hugetlb.c index e5828875f7bb..3eedb187e549 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -4170,6 +4170,11 @@ long follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, } ret = hugetlb_fault(mm, vma, vaddr, fault_flags); if (ret & VM_FAULT_ERROR) { + int err = vm_fault_to_errno(ret, flags); + + if (err) + return err; + remainder = 0; break; } From 864b9a393dcb5aed09b8fd31b9bbda0fdda99374 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 2 Jun 2017 14:46:49 -0700 Subject: [PATCH 0396/1065] mm: consider memblock reservations for deferred memory initialization sizing We have seen an early OOM killer invocation on ppc64 systems with crashkernel=4096M: kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0 kthreadd cpuset=/ mems_allowed=7 CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1 Call Trace: dump_stack+0xb0/0xf0 (unreliable) dump_header+0xb0/0x258 out_of_memory+0x5f0/0x640 __alloc_pages_nodemask+0xa8c/0xc80 kmem_getpages+0x84/0x1a0 fallback_alloc+0x2a4/0x320 kmem_cache_alloc_node+0xc0/0x2e0 copy_process.isra.25+0x260/0x1b30 _do_fork+0x94/0x470 kernel_thread+0x48/0x60 kthreadd+0x264/0x330 ret_from_kernel_thread+0x5c/0xa4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 unstable:0 slab_reclaimable:5 slab_unreclaimable:73 mapped:0 shmem:0 pagetables:0 bounce:0 free:0 free_pcp:0 free_cma:0 Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 0 0 0 Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB 0 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 819200 pages RAM 0 pages HighMem/MovableOnly 817481 pages reserved 0 pages cma reserved 0 pages hwpoisoned the reason is that the managed memory is too low (only 110MB) while the rest of the the 50GB is still waiting for the deferred intialization to be done. update_defer_init estimates the initial memoty to initialize to 2GB at least but it doesn't consider any memory allocated in that range. In this particular case we've had Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB) so the low 2GB is mostly depleted. Fix this by considering memblock allocations in the initial static initialization estimation. Move the max_initialise to reset_deferred_meminit and implement a simple memblock_reserved_memory helper which iterates all reserved blocks and sums the size of all that start below the given address. The cumulative size is than added on top of the initial estimation. This is still not ideal because reset_deferred_meminit doesn't consider holes and so reservation might be above the initial estimation whihch we ignore but let's make the logic simpler until we really need to handle more complicated cases. Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.cz Signed-off-by: Michal Hocko Acked-by: Mel Gorman Tested-by: Srikar Dronamraju Cc: [4.2+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memblock.h | 8 ++++++++ include/linux/mmzone.h | 1 + mm/memblock.c | 23 +++++++++++++++++++++++ mm/page_alloc.c | 33 ++++++++++++++++++++++----------- 4 files changed, 54 insertions(+), 11 deletions(-) diff --git a/include/linux/memblock.h b/include/linux/memblock.h index 4ce24a376262..8098695e5d8d 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -425,12 +425,20 @@ static inline void early_memtest(phys_addr_t start, phys_addr_t end) } #endif +extern unsigned long memblock_reserved_memory_within(phys_addr_t start_addr, + phys_addr_t end_addr); #else static inline phys_addr_t memblock_alloc(phys_addr_t size, phys_addr_t align) { return 0; } +static inline unsigned long memblock_reserved_memory_within(phys_addr_t start_addr, + phys_addr_t end_addr) +{ + return 0; +} + #endif /* CONFIG_HAVE_MEMBLOCK */ #endif /* __KERNEL__ */ diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index ebaccd4e7d8c..ef6a13b7bd3e 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -678,6 +678,7 @@ typedef struct pglist_data { * is the first PFN that needs to be initialised. */ unsigned long first_deferred_pfn; + unsigned long static_init_size; #endif /* CONFIG_DEFERRED_STRUCT_PAGE_INIT */ #ifdef CONFIG_TRANSPARENT_HUGEPAGE diff --git a/mm/memblock.c b/mm/memblock.c index b049c9b2dba8..7b8a5db76a2f 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -1739,6 +1739,29 @@ static void __init_memblock memblock_dump(struct memblock_type *type) } } +extern unsigned long __init_memblock +memblock_reserved_memory_within(phys_addr_t start_addr, phys_addr_t end_addr) +{ + struct memblock_region *rgn; + unsigned long size = 0; + int idx; + + for_each_memblock_type((&memblock.reserved), rgn) { + phys_addr_t start, end; + + if (rgn->base + rgn->size < start_addr) + continue; + if (rgn->base > end_addr) + continue; + + start = rgn->base; + end = start + rgn->size; + size += end - start; + } + + return size; +} + void __init_memblock __memblock_dump_all(void) { pr_info("MEMBLOCK configuration:\n"); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index b7a6f583a373..2302f250d6b1 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -292,6 +292,26 @@ int page_group_by_mobility_disabled __read_mostly; #ifdef CONFIG_DEFERRED_STRUCT_PAGE_INIT static inline void reset_deferred_meminit(pg_data_t *pgdat) { + unsigned long max_initialise; + unsigned long reserved_lowmem; + + /* + * Initialise at least 2G of a node but also take into account that + * two large system hashes that can take up 1GB for 0.25TB/node. + */ + max_initialise = max(2UL << (30 - PAGE_SHIFT), + (pgdat->node_spanned_pages >> 8)); + + /* + * Compensate the all the memblock reservations (e.g. crash kernel) + * from the initial estimation to make sure we will initialize enough + * memory to boot. + */ + reserved_lowmem = memblock_reserved_memory_within(pgdat->node_start_pfn, + pgdat->node_start_pfn + max_initialise); + max_initialise += reserved_lowmem; + + pgdat->static_init_size = min(max_initialise, pgdat->node_spanned_pages); pgdat->first_deferred_pfn = ULONG_MAX; } @@ -314,20 +334,11 @@ static inline bool update_defer_init(pg_data_t *pgdat, unsigned long pfn, unsigned long zone_end, unsigned long *nr_initialised) { - unsigned long max_initialise; - /* Always populate low zones for address-contrained allocations */ if (zone_end < pgdat_end_pfn(pgdat)) return true; - /* - * Initialise at least 2G of a node but also take into account that - * two large system hashes that can take up 1GB for 0.25TB/node. - */ - max_initialise = max(2UL << (30 - PAGE_SHIFT), - (pgdat->node_spanned_pages >> 8)); - (*nr_initialised)++; - if ((*nr_initialised > max_initialise) && + if ((*nr_initialised > pgdat->static_init_size) && (pfn & (PAGES_PER_SECTION - 1)) == 0) { pgdat->first_deferred_pfn = pfn; return false; @@ -6138,7 +6149,6 @@ void __paginginit free_area_init_node(int nid, unsigned long *zones_size, /* pg_data_t should be reset to zero when it's allocated */ WARN_ON(pgdat->nr_zones || pgdat->kswapd_classzone_idx); - reset_deferred_meminit(pgdat); pgdat->node_id = nid; pgdat->node_start_pfn = node_start_pfn; pgdat->per_cpu_nodestats = NULL; @@ -6160,6 +6170,7 @@ void __paginginit free_area_init_node(int nid, unsigned long *zones_size, (unsigned long)pgdat->node_mem_map); #endif + reset_deferred_meminit(pgdat); free_area_init_core(pgdat); } From d6c9708737c2107c38bd75f133d14d5801b8d6d5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Draszik?= Date: Fri, 2 Jun 2017 14:46:51 -0700 Subject: [PATCH 0397/1065] scripts/gdb: make lx-dmesg command work (reliably) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit lx-dmesg needs access to the log_buf symbol from printk.c. Unfortunately, the symbol log_buf also exists in BPF's verifier.c and hence gdb can pick one or the other. If it happens to pick BPF's log_buf, lx-dmesg doesn't work: (gdb) lx-dmesg Python Exception Cannot access memory at address 0x0: Error occurred in Python command: Cannot access memory at address 0x0 (gdb) p log_buf $15 = 0x0 Luckily, GDB has a way to deal with this, see https://sourceware.org/gdb/onlinedocs/gdb/Symbols.html (gdb) info variables ^log_buf$ All variables matching regular expression "^log_buf$": File /kernel/bpf/verifier.c: static char *log_buf; File /kernel/printk/printk.c: static char *log_buf; (gdb) p 'verifier.c'::log_buf $1 = 0x0 (gdb) p 'printk.c'::log_buf $2 = 0x811a6aa0 <__log_buf> "" (gdb) p &log_buf $3 = (char **) 0x8120fe40 (gdb) p &'verifier.c'::log_buf $4 = (char **) 0x8120fe40 (gdb) p &'printk.c'::log_buf $5 = (char **) 0x8048b7d0 By being explicit about the location of the symbol, we can make lx-dmesg work again. While at it, do the same for the other symbols we need from printk.c Link: http://lkml.kernel.org/r/20170526112222.3414-1-git@andred.net Signed-off-by: André Draszik Tested-by: Kieran Bingham Acked-by: Jan Kiszka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/gdb/linux/dmesg.py | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/scripts/gdb/linux/dmesg.py b/scripts/gdb/linux/dmesg.py index f9b92ece7834..5afd1098e33a 100644 --- a/scripts/gdb/linux/dmesg.py +++ b/scripts/gdb/linux/dmesg.py @@ -23,10 +23,11 @@ class LxDmesg(gdb.Command): super(LxDmesg, self).__init__("lx-dmesg", gdb.COMMAND_DATA) def invoke(self, arg, from_tty): - log_buf_addr = int(str(gdb.parse_and_eval("log_buf")).split()[0], 16) - log_first_idx = int(gdb.parse_and_eval("log_first_idx")) - log_next_idx = int(gdb.parse_and_eval("log_next_idx")) - log_buf_len = int(gdb.parse_and_eval("log_buf_len")) + log_buf_addr = int(str(gdb.parse_and_eval( + "'printk.c'::log_buf")).split()[0], 16) + log_first_idx = int(gdb.parse_and_eval("'printk.c'::log_first_idx")) + log_next_idx = int(gdb.parse_and_eval("'printk.c'::log_next_idx")) + log_buf_len = int(gdb.parse_and_eval("'printk.c'::log_buf_len")) inf = gdb.inferiors()[0] start = log_buf_addr + log_first_idx From 8d4b31376974855cd4fb176e5d63ba8e0407928e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 2 Jun 2017 17:18:47 -0700 Subject: [PATCH 0398/1065] Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 9b13a4ca8d2c ("Input: axp20x-pek - do not register input device on some systems") added a check for the INTCFD9 ACPI device which also handles the powerbutton as on some systems the powerbutton is connected to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled by soc_button_array which attaches itself to the INTCFD9 ACPI device. Testing + comparing DSDTs has shown that this only happens on Cherry Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on Bay Trail devices but there the power button is only connected to the PMIC and not handled by soc_button_array. This means that the INTCFD9 check has caused a regression on Bay Trail devices, causing power-button presses to no longer be seen. This commit fixes this by limiting the check to devices where the ACPI node for the AXP288 contains a _HRV (hardware revision) attribute with a value of 3 which indicates we are dealing with a Cherry Trail platform. Fixes: 9b13a4ca8d2c ("Input: axp20x-pek - do not register input ...") Reported-by: Сергей Трусов Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/misc/axp20x-pek.c | 43 +++++++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 7 deletions(-) diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c index f11807db6979..c0a763a70a00 100644 --- a/drivers/input/misc/axp20x-pek.c +++ b/drivers/input/misc/axp20x-pek.c @@ -256,6 +256,41 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek, return 0; } +#ifdef CONFIG_ACPI +static bool axp20x_pek_should_register_input(struct axp20x_pek *axp20x_pek, + struct platform_device *pdev) +{ + unsigned long long hrv = 0; + acpi_status status; + + if (IS_ENABLED(CONFIG_INPUT_SOC_BUTTON_ARRAY) && + axp20x_pek->axp20x->variant == AXP288_ID) { + status = acpi_evaluate_integer(ACPI_HANDLE(pdev->dev.parent), + "_HRV", NULL, &hrv); + if (ACPI_FAILURE(status)) + dev_err(&pdev->dev, "Failed to get PMIC hardware revision\n"); + + /* + * On Cherry Trail platforms (hrv == 3), do not register the + * input device if there is an "INTCFD9" gpio + * button ACPI device, as that handles the power button too, + * and otherwise we end up reporting all presses twice. + */ + if (hrv == 3 && acpi_dev_found("INTCFD9")) + return false; + + } + + return true; +} +#else +static bool axp20x_pek_should_register_input(struct axp20x_pek *axp20x_pek, + struct platform_device *pdev) +{ + return true; +} +#endif + static int axp20x_pek_probe(struct platform_device *pdev) { struct axp20x_pek *axp20x_pek; @@ -268,13 +303,7 @@ static int axp20x_pek_probe(struct platform_device *pdev) axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent); - /* - * Do not register the input device if there is an "INTCFD9" - * gpio button ACPI device, that handles the power button too, - * and otherwise we end up reporting all presses twice. - */ - if (!acpi_dev_found("INTCFD9") || - !IS_ENABLED(CONFIG_INPUT_SOC_BUTTON_ARRAY)) { + if (axp20x_pek_should_register_input(axp20x_pek, pdev)) { error = axp20x_pek_probe_input_device(axp20x_pek, pdev); if (error) return error; From 0fd5f221093870d93edb696f6903b058c4d75411 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 2 Jun 2017 17:50:22 -0700 Subject: [PATCH 0399/1065] Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too acpi_dev_found checks that there is a matching ACPI node, but it may be disabled (_STA method returns 0) in which case the soc_button_array driver will not bind to it and axp20x-pek should handle the power-button. This commit switches from acpi_dev_found to acpi_dev_present to avoid not registering an input-dev for the powerbutton when there is a disabled PNP0C40 device. The ACPI-6.0 standard defines a standard gpio button device using the ACPI0011 HID replacing the custom PNP0C40 gpio device, many newer devices define both PNP0C40 and ACPI0011 devices enabling one or the other depending on whether the BIOS thinks it is going to boot Android or Windows. This commit adds a check for the ACPI0011 device, so that if either device is present *and* enabled we don't register an input-dev for the powerbutton. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/misc/axp20x-pek.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c index c0a763a70a00..400869e61a06 100644 --- a/drivers/input/misc/axp20x-pek.c +++ b/drivers/input/misc/axp20x-pek.c @@ -272,11 +272,12 @@ static bool axp20x_pek_should_register_input(struct axp20x_pek *axp20x_pek, /* * On Cherry Trail platforms (hrv == 3), do not register the - * input device if there is an "INTCFD9" gpio + * input device if there is an "INTCFD9" or "ACPI0011" gpio * button ACPI device, as that handles the power button too, * and otherwise we end up reporting all presses twice. */ - if (hrv == 3 && acpi_dev_found("INTCFD9")) + if (hrv == 3 && (acpi_dev_present("INTCFD9", NULL, -1) || + acpi_dev_present("ACPI0011", NULL, -1))) return false; } From 77125a701adb21bfc03a2af211f472f8b490a084 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 31 May 2017 15:58:22 +0800 Subject: [PATCH 0400/1065] ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU The AR100 clock within the R_CCU (PRCM) has the PLL_PERIPH0 as one of its parents. This adds the reference in the device tree describing this relationship. This patch uses a raw number for the clock index to ease merging by avoiding cross tree dependencies. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index d0067fec99de..d4f600dbb7eb 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -560,8 +560,9 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>; - clock-names = "hosc", "losc", "iosc"; + clocks = <&osc24M>, <&osc32k>, <&iosc>, + <&ccu 9>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; From f74994a94063bc85ac1d6ad677ed06b5279c101f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 31 May 2017 15:58:24 +0800 Subject: [PATCH 0401/1065] arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU The AR100 clock within the R_CCU (PRCM) has the PLL_PERIPH0 as one of its parents. This adds the reference in the device tree describing this relationship. This patch uses a raw number for the clock index to ease merging by avoiding cross tree dependencies. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index c7f669f5884f..166c9ef884dc 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -406,8 +406,9 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>; - clock-names = "hosc", "losc", "iosc"; + clocks = <&osc24M>, <&osc32k>, <&iosc>, + <&ccu 11>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; From 40da1b11f01e43aad1aa6cea64681b6125e8a2a7 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 2 Jun 2017 16:27:14 +0200 Subject: [PATCH 0402/1065] cpu/hotplug: Drop the device lock on error If a custom CPU target is specified and that one is not available _or_ can't be interrupted then the code returns to userland without dropping a lock as notices by lockdep: |echo 133 > /sys/devices/system/cpu/cpu7/hotplug/target | ================================================ | [ BUG: lock held when returning to user space! ] | ------------------------------------------------ | bash/503 is leaving the kernel with locks still held! | 1 lock held by bash/503: | #0: (device_hotplug_lock){+.+...}, at: [] lock_device_hotplug_sysfs+0x10/0x40 So release the lock then. Fixes: 757c989b9994 ("cpu/hotplug: Make target state writeable") Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170602142714.3ogo25f2wbq6fjpj@linutronix.de --- kernel/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/cpu.c b/kernel/cpu.c index 9ae6fbe5b5cf..cb5103413bd8 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -1658,13 +1658,13 @@ static ssize_t write_cpuhp_target(struct device *dev, ret = !sp->name || sp->cant_stop ? -EINVAL : 0; mutex_unlock(&cpuhp_state_mutex); if (ret) - return ret; + goto out; if (st->state < target) ret = do_cpu_up(dev->id, target); else ret = do_cpu_down(dev->id, target); - +out: unlock_device_hotplug(); return ret ? ret : count; } From 0a33252e060e97ed3fbdcec9517672f1e91aaef3 Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Fri, 26 May 2017 23:40:33 -0400 Subject: [PATCH 0403/1065] staging/lustre/lov: remove set_fs() call from lov_getstripe() lov_getstripe() calls set_fs(KERNEL_DS) so that it can handle a struct lov_user_md pointer from user- or kernel-space. This changes the behavior of copy_from_user() on SPARC and may result in a misaligned access exception which in turn oopses the kernel. In fact the relevant argument to lov_getstripe() is never called with a kernel-space pointer and so changing the address limits is unnecessary and so we remove the calls to save, set, and restore the address limits. Signed-off-by: John L. Hammond Reviewed-on: http://review.whamcloud.com/6150 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3221 Reviewed-by: Andreas Dilger Reviewed-by: Li Wei Signed-off-by: Oleg Drokin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/lustre/lustre/lov/lov_pack.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/staging/lustre/lustre/lov/lov_pack.c b/drivers/staging/lustre/lustre/lov/lov_pack.c index 2e1bd47337fd..e6727cefde05 100644 --- a/drivers/staging/lustre/lustre/lov/lov_pack.c +++ b/drivers/staging/lustre/lustre/lov/lov_pack.c @@ -293,18 +293,10 @@ int lov_getstripe(struct lov_object *obj, struct lov_stripe_md *lsm, size_t lmmk_size; size_t lum_size; int rc; - mm_segment_t seg; if (!lsm) return -ENODATA; - /* - * "Switch to kernel segment" to allow copying from kernel space by - * copy_{to,from}_user(). - */ - seg = get_fs(); - set_fs(KERNEL_DS); - if (lsm->lsm_magic != LOV_MAGIC_V1 && lsm->lsm_magic != LOV_MAGIC_V3) { CERROR("bad LSM MAGIC: 0x%08X != 0x%08X nor 0x%08X\n", lsm->lsm_magic, LOV_MAGIC_V1, LOV_MAGIC_V3); @@ -406,6 +398,5 @@ int lov_getstripe(struct lov_object *obj, struct lov_stripe_md *lsm, out_free: kvfree(lmmk); out: - set_fs(seg); return rc; } From 948588e25b8af5e66962ed3f53e1cae1656fa5af Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Mon, 29 May 2017 09:59:40 +0000 Subject: [PATCH 0404/1065] iio: imu: inv_mpu6050: add accel lpf setting for chip >= MPU6500 Starting from MPU6500, accelerometer dlpf is set in a separate register named ACCEL_CONFIG_2. Add this new register in the map and set it for the corresponding chips. Signed-off-by: Jean-Baptiste Maneyrol Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 39 ++++++++++++++++++++-- drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 3 ++ 2 files changed, 39 insertions(+), 3 deletions(-) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 96dabbd2f004..88a7c5d4e4d2 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -41,6 +41,7 @@ static const int accel_scale[] = {598, 1196, 2392, 4785}; static const struct inv_mpu6050_reg_map reg_set_6500 = { .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, .lpf = INV_MPU6050_REG_CONFIG, + .accel_lpf = INV_MPU6500_REG_ACCEL_CONFIG_2, .user_ctrl = INV_MPU6050_REG_USER_CTRL, .fifo_en = INV_MPU6050_REG_FIFO_EN, .gyro_config = INV_MPU6050_REG_GYRO_CONFIG, @@ -210,6 +211,37 @@ int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on) } EXPORT_SYMBOL_GPL(inv_mpu6050_set_power_itg); +/** + * inv_mpu6050_set_lpf_regs() - set low pass filter registers, chip dependent + * + * MPU60xx/MPU9150 use only 1 register for accelerometer + gyroscope + * MPU6500 and above have a dedicated register for accelerometer + */ +static int inv_mpu6050_set_lpf_regs(struct inv_mpu6050_state *st, + enum inv_mpu6050_filter_e val) +{ + int result; + + result = regmap_write(st->map, st->reg->lpf, val); + if (result) + return result; + + switch (st->chip_type) { + case INV_MPU6050: + case INV_MPU6000: + case INV_MPU9150: + /* old chips, nothing to do */ + result = 0; + break; + default: + /* set accel lpf */ + result = regmap_write(st->map, st->reg->accel_lpf, val); + break; + } + + return result; +} + /** * inv_mpu6050_init_config() - Initialize hardware, disable FIFO. * @@ -233,8 +265,7 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev) if (result) return result; - d = INV_MPU6050_FILTER_20HZ; - result = regmap_write(st->map, st->reg->lpf, d); + result = inv_mpu6050_set_lpf_regs(st, INV_MPU6050_FILTER_20HZ); if (result) return result; @@ -537,6 +568,8 @@ error_write_raw: * would be alising. This function basically search for the * correct low pass parameters based on the fifo rate, e.g, * sampling frequency. + * + * lpf is set automatically when setting sampling rate to avoid any aliases. */ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) { @@ -552,7 +585,7 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1)) i++; data = d[i]; - result = regmap_write(st->map, st->reg->lpf, data); + result = inv_mpu6050_set_lpf_regs(st, data); if (result) return result; st->chip_config.lpf = data; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index ef13de7a2c20..953a0c09d568 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -28,6 +28,7 @@ * struct inv_mpu6050_reg_map - Notable registers. * @sample_rate_div: Divider applied to gyro output rate. * @lpf: Configures internal low pass filter. + * @accel_lpf: Configures accelerometer low pass filter. * @user_ctrl: Enables/resets the FIFO. * @fifo_en: Determines which data will appear in FIFO. * @gyro_config: gyro config register. @@ -47,6 +48,7 @@ struct inv_mpu6050_reg_map { u8 sample_rate_div; u8 lpf; + u8 accel_lpf; u8 user_ctrl; u8 fifo_en; u8 gyro_config; @@ -188,6 +190,7 @@ struct inv_mpu6050_state { #define INV_MPU6050_FIFO_THRESHOLD 500 /* mpu6500 registers */ +#define INV_MPU6500_REG_ACCEL_CONFIG_2 0x1D #define INV_MPU6500_REG_ACCEL_OFFSET 0x77 /* delay time in milliseconds */ From 1454e15bc28ba94aa5d6b31a83a42d5c03af2a6d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 16 May 2017 15:26:12 +0000 Subject: [PATCH 0405/1065] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe() In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Also add NULL test for iores. Signed-off-by: Wei Yongjun Signed-off-by: Jonathan Cameron --- drivers/iio/adc/mxs-lradc-adc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/mxs-lradc-adc.c b/drivers/iio/adc/mxs-lradc-adc.c index b0c7d8ee5cb8..6888167ca1e6 100644 --- a/drivers/iio/adc/mxs-lradc-adc.c +++ b/drivers/iio/adc/mxs-lradc-adc.c @@ -718,9 +718,12 @@ static int mxs_lradc_adc_probe(struct platform_device *pdev) adc->dev = dev; iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iores) + return -EINVAL; + adc->base = devm_ioremap(dev, iores->start, resource_size(iores)); - if (IS_ERR(adc->base)) - return PTR_ERR(adc->base); + if (!adc->base) + return -ENOMEM; init_completion(&adc->completion); spin_lock_init(&adc->lock); From 32829da54d9368103a2f03269a5120aa9ee4d5da Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Fri, 2 Jun 2017 15:36:39 -0700 Subject: [PATCH 0406/1065] drivers: char: mem: Fix wraparound check to allow mappings up to the end A recent fix to /dev/mem prevents mappings from wrapping around the end of physical address space. However, the check was written in a way that also prevents a mapping reaching just up to the end of physical address space, which may be a valid use case (especially on 32-bit systems). This patch fixes it by checking the last mapped address (instead of the first address behind that) for overflow. Fixes: b299cde245 ("drivers: char: mem: Check for address space wraparound with mmap()") Cc: Reported-by: Nico Huber Signed-off-by: Julius Werner Signed-off-by: Greg Kroah-Hartman --- drivers/char/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 6e0cbe092220..593a8818aca9 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -343,7 +343,7 @@ static int mmap_mem(struct file *file, struct vm_area_struct *vma) phys_addr_t offset = (phys_addr_t)vma->vm_pgoff << PAGE_SHIFT; /* It's illegal to wrap around the end of the physical address space. */ - if (offset + (phys_addr_t)size < offset) + if (offset + (phys_addr_t)size - 1 < offset) return -EINVAL; if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size)) From 6f9193ec044a8f72d8b6ae94a5c4ab6e8b0f00ca Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Mon, 29 May 2017 22:08:24 +0300 Subject: [PATCH 0407/1065] mei: make sysfs modalias format similar as uevent modalias modprobe is not able to resolve sysfs modalias for mei devices. # cat /sys/class/watchdog/watchdog0/device/watchdog/watchdog0/device/modalias mei::05b79a6f-4628-4d7f-899d-a91514cb32ab: # modprobe --set-version 4.9.6-200.fc25.x86_64 -R mei::05b79a6f-4628-4d7f-899d-a91514cb32ab: modprobe: FATAL: Module mei::05b79a6f-4628-4d7f-899d-a91514cb32ab: not found in directory /lib/modules/4.9.6-200.fc25.x86_64 # cat /lib/modules/4.9.6-200.fc25.x86_64/modules.alias | grep 05b79a6f-4628-4d7f-899d-a91514cb32ab alias mei:*:05b79a6f-4628-4d7f-899d-a91514cb32ab:*:* mei_wdt commit b26864cad1c9 ("mei: bus: add client protocol version to the device alias"), however sysfs modalias is still in formmat mei:S:uuid:*. This patch equates format of uevent and sysfs modalias so that modprobe is able to resolve the aliases. Cc: 4.7+ Fixes: commit b26864cad1c9 ("mei: bus: add client protocol version to the device alias") Signed-off-by: Pratyush Anand Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index d1928fdd0f43..07aad8576334 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -763,8 +763,10 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *a, { struct mei_cl_device *cldev = to_mei_cl_device(dev); const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); + u8 version = mei_me_cl_ver(cldev->me_cl); - return scnprintf(buf, PAGE_SIZE, "mei:%s:%pUl:", cldev->name, uuid); + return scnprintf(buf, PAGE_SIZE, "mei:%s:%pUl:%02X:", + cldev->name, uuid, version); } static DEVICE_ATTR_RO(modalias); From 4d58e7329fdd87d37f04b319d6a5165aaff5d75c Mon Sep 17 00:00:00 2001 From: Stefan Schaeckeler Date: Fri, 2 Jun 2017 12:42:08 -0700 Subject: [PATCH 0408/1065] hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed Call of_node_put() on a node claimed with of_node_get() or by any other means such as for_each_child_of_node(). Signed-off-by: Stefan Schaeckeler Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck --- drivers/hwmon/aspeed-pwm-tacho.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c index 12b716b70ead..cc15bedb3415 100644 --- a/drivers/hwmon/aspeed-pwm-tacho.c +++ b/drivers/hwmon/aspeed-pwm-tacho.c @@ -808,7 +808,6 @@ static int aspeed_pwm_tacho_probe(struct platform_device *pdev) if (ret) return ret; } - of_node_put(np); priv->groups[0] = &pwm_dev_group; priv->groups[1] = &fan_dev_group; From 5f348fa35a28b19cf7ee1eaa420757341a724c86 Mon Sep 17 00:00:00 2001 From: Stefan Schaeckeler Date: Fri, 2 Jun 2017 12:43:28 -0700 Subject: [PATCH 0409/1065] hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1 Make fan and pwm names in sysfs start with index 1 in accordance to Documentation/hwmon/sysfs-interface conventions. Current implementation starts with index 0, making tools such as sensors(1) skip the first fan. Signed-off-by: Stefan Schaeckeler Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck --- drivers/hwmon/aspeed-pwm-tacho.c | 52 ++++++++++++++++---------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c index cc15bedb3415..9de13d626c68 100644 --- a/drivers/hwmon/aspeed-pwm-tacho.c +++ b/drivers/hwmon/aspeed-pwm-tacho.c @@ -597,24 +597,23 @@ static umode_t fan_dev_is_visible(struct kobject *kobj, return a->mode; } -static SENSOR_DEVICE_ATTR(pwm0, 0644, - show_pwm, set_pwm, 0); static SENSOR_DEVICE_ATTR(pwm1, 0644, - show_pwm, set_pwm, 1); + show_pwm, set_pwm, 0); static SENSOR_DEVICE_ATTR(pwm2, 0644, - show_pwm, set_pwm, 2); + show_pwm, set_pwm, 1); static SENSOR_DEVICE_ATTR(pwm3, 0644, - show_pwm, set_pwm, 3); + show_pwm, set_pwm, 2); static SENSOR_DEVICE_ATTR(pwm4, 0644, - show_pwm, set_pwm, 4); + show_pwm, set_pwm, 3); static SENSOR_DEVICE_ATTR(pwm5, 0644, - show_pwm, set_pwm, 5); + show_pwm, set_pwm, 4); static SENSOR_DEVICE_ATTR(pwm6, 0644, - show_pwm, set_pwm, 6); + show_pwm, set_pwm, 5); static SENSOR_DEVICE_ATTR(pwm7, 0644, + show_pwm, set_pwm, 6); +static SENSOR_DEVICE_ATTR(pwm8, 0644, show_pwm, set_pwm, 7); static struct attribute *pwm_dev_attrs[] = { - &sensor_dev_attr_pwm0.dev_attr.attr, &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm3.dev_attr.attr, @@ -622,6 +621,7 @@ static struct attribute *pwm_dev_attrs[] = { &sensor_dev_attr_pwm5.dev_attr.attr, &sensor_dev_attr_pwm6.dev_attr.attr, &sensor_dev_attr_pwm7.dev_attr.attr, + &sensor_dev_attr_pwm8.dev_attr.attr, NULL, }; @@ -630,40 +630,39 @@ static const struct attribute_group pwm_dev_group = { .is_visible = pwm_is_visible, }; -static SENSOR_DEVICE_ATTR(fan0_input, 0444, - show_rpm, NULL, 0); static SENSOR_DEVICE_ATTR(fan1_input, 0444, - show_rpm, NULL, 1); + show_rpm, NULL, 0); static SENSOR_DEVICE_ATTR(fan2_input, 0444, - show_rpm, NULL, 2); + show_rpm, NULL, 1); static SENSOR_DEVICE_ATTR(fan3_input, 0444, - show_rpm, NULL, 3); + show_rpm, NULL, 2); static SENSOR_DEVICE_ATTR(fan4_input, 0444, - show_rpm, NULL, 4); + show_rpm, NULL, 3); static SENSOR_DEVICE_ATTR(fan5_input, 0444, - show_rpm, NULL, 5); + show_rpm, NULL, 4); static SENSOR_DEVICE_ATTR(fan6_input, 0444, - show_rpm, NULL, 6); + show_rpm, NULL, 5); static SENSOR_DEVICE_ATTR(fan7_input, 0444, - show_rpm, NULL, 7); + show_rpm, NULL, 6); static SENSOR_DEVICE_ATTR(fan8_input, 0444, - show_rpm, NULL, 8); + show_rpm, NULL, 7); static SENSOR_DEVICE_ATTR(fan9_input, 0444, - show_rpm, NULL, 9); + show_rpm, NULL, 8); static SENSOR_DEVICE_ATTR(fan10_input, 0444, - show_rpm, NULL, 10); + show_rpm, NULL, 9); static SENSOR_DEVICE_ATTR(fan11_input, 0444, - show_rpm, NULL, 11); + show_rpm, NULL, 10); static SENSOR_DEVICE_ATTR(fan12_input, 0444, - show_rpm, NULL, 12); + show_rpm, NULL, 11); static SENSOR_DEVICE_ATTR(fan13_input, 0444, - show_rpm, NULL, 13); + show_rpm, NULL, 12); static SENSOR_DEVICE_ATTR(fan14_input, 0444, - show_rpm, NULL, 14); + show_rpm, NULL, 13); static SENSOR_DEVICE_ATTR(fan15_input, 0444, + show_rpm, NULL, 14); +static SENSOR_DEVICE_ATTR(fan16_input, 0444, show_rpm, NULL, 15); static struct attribute *fan_dev_attrs[] = { - &sensor_dev_attr_fan0_input.dev_attr.attr, &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan2_input.dev_attr.attr, &sensor_dev_attr_fan3_input.dev_attr.attr, @@ -679,6 +678,7 @@ static struct attribute *fan_dev_attrs[] = { &sensor_dev_attr_fan13_input.dev_attr.attr, &sensor_dev_attr_fan14_input.dev_attr.attr, &sensor_dev_attr_fan15_input.dev_attr.attr, + &sensor_dev_attr_fan16_input.dev_attr.attr, NULL }; From 3116a23bb30272d74ea81baf5d0ee23f602dd15b Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 10 May 2017 19:20:44 +0400 Subject: [PATCH 0410/1065] bio-integrity: Do not allocate integrity context for bio w/o data If bio has no data, such as ones from blkdev_issue_flush(), then we have nothing to protect. This patch prevent bugon like follows: kfree_debugcheck: out of range ptr ac1fa1d106742a5ah kernel BUG at mm/slab.c:2773! invalid opcode: 0000 [#1] SMP Modules linked in: bcache CPU: 0 PID: 4428 Comm: xfs_io Tainted: G W 4.11.0-rc4-ext4-00041-g2ef0043-dirty #43 Hardware name: Virtuozzo KVM, BIOS seabios-1.7.5-11.vz7.4 04/01/2014 task: ffff880137786440 task.stack: ffffc90000ba8000 RIP: 0010:kfree_debugcheck+0x25/0x2a RSP: 0018:ffffc90000babde0 EFLAGS: 00010082 RAX: 0000000000000034 RBX: ac1fa1d106742a5a RCX: 0000000000000007 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013f3ccb40 RBP: ffffc90000babde8 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000fcb76420 R11: 00000000725172ed R12: 0000000000000282 R13: ffffffff8150e766 R14: ffff88013a145e00 R15: 0000000000000001 FS: 00007fb09384bf40(0000) GS:ffff88013f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd0172f9e40 CR3: 0000000137fa9000 CR4: 00000000000006f0 Call Trace: kfree+0xc8/0x1b3 bio_integrity_free+0xc3/0x16b bio_free+0x25/0x66 bio_put+0x14/0x26 blkdev_issue_flush+0x7a/0x85 blkdev_fsync+0x35/0x42 vfs_fsync_range+0x8e/0x9f vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 entry_SYSCALL_64_fastpath+0x1f/0xc2 Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Martin K. Petersen Signed-off-by: Dmitry Monakhov Signed-off-by: Jens Axboe --- block/bio-integrity.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/block/bio-integrity.c b/block/bio-integrity.c index 5384713d48bc..b5009a896a7f 100644 --- a/block/bio-integrity.c +++ b/block/bio-integrity.c @@ -175,6 +175,9 @@ bool bio_integrity_enabled(struct bio *bio) if (bio_op(bio) != REQ_OP_READ && bio_op(bio) != REQ_OP_WRITE) return false; + if (!bio_sectors(bio)) + return false; + /* Already protected? */ if (bio_integrity(bio)) return false; From 4f253e1eb628f5adf7ca4f43aab4bbb1bfffa081 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 16 May 2017 12:18:11 +0200 Subject: [PATCH 0411/1065] nfs: Mark unnecessarily extern functions as static nfs_initialise_sb() and nfs_clone_super() are declared as extern even though they are used only in fs/nfs/super.c. Mark them as static. Also remove explicit 'inline' directive from nfs_initialise_sb() and leave it upto compiler to decide whether inlining is worth it. Signed-off-by: Jan Kara Signed-off-by: Trond Myklebust --- fs/nfs/internal.h | 2 -- fs/nfs/super.c | 5 +++-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index e9b4c3320e37..3e24392f2caa 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -398,7 +398,6 @@ extern struct file_system_type nfs4_referral_fs_type; bool nfs_auth_info_match(const struct nfs_auth_info *, rpc_authflavor_t); struct dentry *nfs_try_mount(int, const char *, struct nfs_mount_info *, struct nfs_subversion *); -void nfs_initialise_sb(struct super_block *); int nfs_set_sb_security(struct super_block *, struct dentry *, struct nfs_mount_info *); int nfs_clone_sb_security(struct super_block *, struct dentry *, struct nfs_mount_info *); struct dentry *nfs_fs_mount_common(struct nfs_server *, int, const char *, @@ -458,7 +457,6 @@ extern void nfs_read_prepare(struct rpc_task *task, void *calldata); extern void nfs_pageio_reset_read_mds(struct nfs_pageio_descriptor *pgio); /* super.c */ -void nfs_clone_super(struct super_block *, struct nfs_mount_info *); void nfs_umount_begin(struct super_block *); int nfs_statfs(struct dentry *, struct kstatfs *); int nfs_show_options(struct seq_file *, struct dentry *); diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 2f3822a4a7d5..eceb4eabb064 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2301,7 +2301,7 @@ EXPORT_SYMBOL_GPL(nfs_remount); /* * Initialise the common bits of the superblock */ -inline void nfs_initialise_sb(struct super_block *sb) +static void nfs_initialise_sb(struct super_block *sb) { struct nfs_server *server = NFS_SB(sb); @@ -2348,7 +2348,8 @@ EXPORT_SYMBOL_GPL(nfs_fill_super); /* * Finish setting up a cloned NFS2/3/4 superblock */ -void nfs_clone_super(struct super_block *sb, struct nfs_mount_info *mount_info) +static void nfs_clone_super(struct super_block *sb, + struct nfs_mount_info *mount_info) { const struct super_block *old_sb = mount_info->cloned->sb; struct nfs_server *server = NFS_SB(sb); From fc098af16b9ff6d470d779d8ddcfb2d91869045a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 4 Jun 2017 10:23:25 +0200 Subject: [PATCH 0412/1065] Revert "tty: fix port buffer locking" This reverts commit 925bb1ce47f429f69aad35876df7ecd8c53deb7e. It causes lots of warnings and problems so for now, let's just revert it. Reported-by: Reported-by: Russell King Reported-by: Sergey Senozhatsky Reported-by: Geert Uytterhoeven Reported-by: Jiri Slaby Reported-by: Andrey Konovalov Acked-by: Vegard Nossum Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_port.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 4fb3165384c4..6b137194069f 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -34,9 +34,7 @@ static int tty_port_default_receive_buf(struct tty_port *port, if (!disc) return 0; - mutex_lock(&tty->atomic_write_lock); ret = tty_ldisc_receive_buf(disc, p, (char *)f, count); - mutex_unlock(&tty->atomic_write_lock); tty_ldisc_deref(disc); From f4781e76f90df7aec400635d73ea4c35ee1d4765 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 30 May 2017 23:15:34 +0200 Subject: [PATCH 0413/1065] alarmtimer: Prevent overflow of relative timers Andrey reported a alartimer related RCU stall while fuzzing the kernel with syzkaller. The reason for this is an overflow in ktime_add() which brings the resulting time into negative space and causes immediate expiry of the timer. The following rearm with a small interval does not bring the timer back into positive space due to the same issue. This results in a permanent firing alarmtimer which hogs the CPU. Use ktime_add_safe() instead which detects the overflow and clamps the result to KTIME_SEC_MAX. Reported-by: Andrey Konovalov Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Kostya Serebryany Cc: syzkaller Cc: John Stultz Cc: Dmitry Vyukov Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170530211655.802921648@linutronix.de --- kernel/time/alarmtimer.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index 5cb5b0008d97..2b2e032b4eb4 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -387,7 +387,7 @@ void alarm_start_relative(struct alarm *alarm, ktime_t start) { struct alarm_base *base = &alarm_bases[alarm->type]; - start = ktime_add(start, base->gettime()); + start = ktime_add_safe(start, base->gettime()); alarm_start(alarm, start); } EXPORT_SYMBOL_GPL(alarm_start_relative); @@ -475,7 +475,7 @@ u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval) overrun++; } - alarm->node.expires = ktime_add(alarm->node.expires, interval); + alarm->node.expires = ktime_add_safe(alarm->node.expires, interval); return overrun; } EXPORT_SYMBOL_GPL(alarm_forward); @@ -666,7 +666,7 @@ static int alarm_timer_set(struct k_itimer *timr, int flags, ktime_t now; now = alarm_bases[timr->it.alarm.alarmtimer.type].gettime(); - exp = ktime_add(now, exp); + exp = ktime_add_safe(now, exp); } alarm_start(&timr->it.alarm.alarmtimer, exp); From ff86bf0c65f14346bf2440534f9ba5ac232c39a0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 30 May 2017 23:15:35 +0200 Subject: [PATCH 0414/1065] alarmtimer: Rate limit periodic intervals The alarmtimer code has another source of potentially rearming itself too fast. Interval timers with a very samll interval have a similar CPU hog effect as the previously fixed overflow issue. The reason is that alarmtimers do not implement the normal protection against this kind of problem which the other posix timer use: timer expires -> queue signal -> deliver signal -> rearm timer This scheme brings the rearming under scheduler control and prevents permanently firing timers which hog the CPU. Bringing this scheme to the alarm timer code is a major overhaul because it lacks all the necessary mechanisms completely. So for a quick fix limit the interval to one jiffie. This is not problematic in practice as alarmtimers are usually backed by an RTC for suspend which have 1 second resolution. It could be therefor argued that the resolution of this clock should be set to 1 second in general, but that's outside the scope of this fix. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Kostya Serebryany Cc: syzkaller Cc: John Stultz Cc: Dmitry Vyukov Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170530211655.896767100@linutronix.de --- kernel/time/alarmtimer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index 2b2e032b4eb4..ee2f4202d82a 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -660,6 +660,14 @@ static int alarm_timer_set(struct k_itimer *timr, int flags, /* start the timer */ timr->it.alarm.interval = timespec64_to_ktime(new_setting->it_interval); + + /* + * Rate limit to the tick as a hot fix to prevent DOS. Will be + * mopped up later. + */ + if (timr->it.alarm.interval < TICK_NSEC) + timr->it.alarm.interval = TICK_NSEC; + exp = timespec64_to_ktime(new_setting->it_value); /* Convert (if necessary) to absolute time */ if (flags != TIMER_ABSTIME) { From f224c5768c78cb42f582636c4720a4d81d452778 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 18 May 2017 05:40:18 -0300 Subject: [PATCH 0415/1065] [media] atomisp: don't treat warnings as errors Several atomisp files use: ccflags-y += -Werror As, on media, our usual procedure is to use W=1, and atomisp has *a lot* of warnings with such flag enabled,like: ./drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/system_local.h:62:26: warning: 'DDR_BASE' defined but not used [-Wunused-const-variable=] At the end, it causes our build to fail, impacting our workflow. So, remove this crap. If one wants to force -Werror, he can still build with it enabled by passing a parameter to make. Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/i2c/Makefile | 2 -- drivers/staging/media/atomisp/i2c/imx/Makefile | 2 -- drivers/staging/media/atomisp/i2c/ov5693/Makefile | 2 -- drivers/staging/media/atomisp/pci/atomisp2/Makefile | 2 +- 4 files changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/staging/media/atomisp/i2c/Makefile b/drivers/staging/media/atomisp/i2c/Makefile index 8ea01904c0ea..466517c7c8e6 100644 --- a/drivers/staging/media/atomisp/i2c/Makefile +++ b/drivers/staging/media/atomisp/i2c/Makefile @@ -19,5 +19,3 @@ obj-$(CONFIG_VIDEO_AP1302) += ap1302.o obj-$(CONFIG_VIDEO_LM3554) += lm3554.o -ccflags-y += -Werror - diff --git a/drivers/staging/media/atomisp/i2c/imx/Makefile b/drivers/staging/media/atomisp/i2c/imx/Makefile index 1d7f7ab94cac..6b13a3a66e49 100644 --- a/drivers/staging/media/atomisp/i2c/imx/Makefile +++ b/drivers/staging/media/atomisp/i2c/imx/Makefile @@ -4,5 +4,3 @@ imx1x5-objs := imx.o drv201.o ad5816g.o dw9714.o dw9719.o dw9718.o vcm.o otp.o o ov8858_driver-objs := ../ov8858.o dw9718.o vcm.o obj-$(CONFIG_VIDEO_OV8858) += ov8858_driver.o - -ccflags-y += -Werror diff --git a/drivers/staging/media/atomisp/i2c/ov5693/Makefile b/drivers/staging/media/atomisp/i2c/ov5693/Makefile index fceb9e9b881b..c9c0e1245858 100644 --- a/drivers/staging/media/atomisp/i2c/ov5693/Makefile +++ b/drivers/staging/media/atomisp/i2c/ov5693/Makefile @@ -1,3 +1 @@ obj-$(CONFIG_VIDEO_OV5693) += ov5693.o - -ccflags-y += -Werror diff --git a/drivers/staging/media/atomisp/pci/atomisp2/Makefile b/drivers/staging/media/atomisp/pci/atomisp2/Makefile index 3fa7c1c1479f..f126a89a08e9 100644 --- a/drivers/staging/media/atomisp/pci/atomisp2/Makefile +++ b/drivers/staging/media/atomisp/pci/atomisp2/Makefile @@ -351,5 +351,5 @@ DEFINES := -DHRT_HW -DHRT_ISP_CSS_CUSTOM_HOST -DHRT_USE_VIR_ADDRS -D__HOST__ DEFINES += -DATOMISP_POSTFIX=\"css2400b0_v21\" -DISP2400B0 DEFINES += -DSYSTEM_hive_isp_css_2400_system -DISP2400 -ccflags-y += $(INCLUDES) $(DEFINES) -fno-common -Werror +ccflags-y += $(INCLUDES) $(DEFINES) -fno-common From ca33784ba4949856a94a545c91429aae5c8b658d Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 19 May 2017 14:45:15 -0300 Subject: [PATCH 0416/1065] [media] rainshadow-cec: ensure exit_loop is intialized exit_loop is not being initialized, so it contains garbage. Ensure it is initialized to false. Detected by CoverityScan, CID#1436409 ("Uninitialized scalar variable") Fixes: ea6a69defd3311 ("[media] rainshadow-cec: avoid -Wmaybe-uninitialized warning") Signed-off-by: Colin Ian King Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/rainshadow-cec/rainshadow-cec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c index 541ca543f71f..71bd68548c9c 100644 --- a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c +++ b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c @@ -119,7 +119,7 @@ static void rain_irq_work_handler(struct work_struct *work) while (true) { unsigned long flags; - bool exit_loop; + bool exit_loop = false; char data; spin_lock_irqsave(&rain->buf_lock, flags); From 9177e51d1434076a91f9bfb693deae8b955d6d57 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 28 May 2017 05:48:37 -0300 Subject: [PATCH 0417/1065] [media] cec: select CEC_CORE instead of depend on it The CEC framework is used by both drm and media. That makes it tricky to get the dependencies right. This patch moves the CEC_CORE and MEDIA_CEC_NOTIFIER config options out of the media menu and instead drivers that want to use CEC should select CEC_CORE and MEDIA_CEC_NOTIFIER (if needed). Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Kconfig | 6 ++++++ drivers/media/Makefile | 4 ++-- drivers/media/cec/Kconfig | 8 -------- drivers/media/i2c/Kconfig | 9 ++++++--- drivers/media/platform/Kconfig | 6 ++++-- drivers/media/platform/vivid/Kconfig | 3 ++- drivers/media/usb/pulse8-cec/Kconfig | 3 ++- drivers/media/usb/rainshadow-cec/Kconfig | 3 ++- 8 files changed, 24 insertions(+), 18 deletions(-) diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index b72edd27f880..9ec634e2f2ba 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -2,6 +2,12 @@ # Multimedia device configuration # +config CEC_CORE + tristate + +config MEDIA_CEC_NOTIFIER + bool + menuconfig MEDIA_SUPPORT tristate "Multimedia support" depends on HAS_IOMEM diff --git a/drivers/media/Makefile b/drivers/media/Makefile index 523fea3648ad..044503aa8801 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -4,8 +4,6 @@ media-objs := media-device.o media-devnode.o media-entity.o -obj-$(CONFIG_CEC_CORE) += cec/ - # # I2C drivers should come before other drivers, otherwise they'll fail # when compiled as builtin drivers @@ -26,6 +24,8 @@ obj-$(CONFIG_DVB_CORE) += dvb-core/ # There are both core and drivers at RC subtree - merge before drivers obj-y += rc/ +obj-$(CONFIG_CEC_CORE) += cec/ + # # Finally, merge the drivers that require the core # diff --git a/drivers/media/cec/Kconfig b/drivers/media/cec/Kconfig index f944d93e3167..b7d876b384f6 100644 --- a/drivers/media/cec/Kconfig +++ b/drivers/media/cec/Kconfig @@ -1,11 +1,3 @@ -config CEC_CORE - tristate - depends on MEDIA_CEC_SUPPORT - default y - -config MEDIA_CEC_NOTIFIER - bool - config MEDIA_CEC_RC bool "HDMI CEC RC integration" depends on CEC_CORE && RC_CORE diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index fd181c99ce11..aaa9471c7d11 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -220,7 +220,8 @@ config VIDEO_ADV7604 config VIDEO_ADV7604_CEC bool "Enable Analog Devices ADV7604 CEC support" - depends on VIDEO_ADV7604 && CEC_CORE + depends on VIDEO_ADV7604 + select CEC_CORE ---help--- When selected the adv7604 will support the optional HDMI CEC feature. @@ -240,7 +241,8 @@ config VIDEO_ADV7842 config VIDEO_ADV7842_CEC bool "Enable Analog Devices ADV7842 CEC support" - depends on VIDEO_ADV7842 && CEC_CORE + depends on VIDEO_ADV7842 + select CEC_CORE ---help--- When selected the adv7842 will support the optional HDMI CEC feature. @@ -478,7 +480,8 @@ config VIDEO_ADV7511 config VIDEO_ADV7511_CEC bool "Enable Analog Devices ADV7511 CEC support" - depends on VIDEO_ADV7511 && CEC_CORE + depends on VIDEO_ADV7511 + select CEC_CORE ---help--- When selected the adv7511 will support the optional HDMI CEC feature. diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index ac026ee1ca07..017419bef9b1 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -501,7 +501,8 @@ if CEC_PLATFORM_DRIVERS config VIDEO_SAMSUNG_S5P_CEC tristate "Samsung S5P CEC driver" - depends on CEC_CORE && (PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST) + depends on PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST + select CEC_CORE select MEDIA_CEC_NOTIFIER ---help--- This is a driver for Samsung S5P HDMI CEC interface. It uses the @@ -511,7 +512,8 @@ config VIDEO_SAMSUNG_S5P_CEC config VIDEO_STI_HDMI_CEC tristate "STMicroelectronics STiH4xx HDMI CEC driver" - depends on CEC_CORE && (ARCH_STI || COMPILE_TEST) + depends on ARCH_STI || COMPILE_TEST + select CEC_CORE select MEDIA_CEC_NOTIFIER ---help--- This is a driver for STIH4xx HDMI CEC interface. It uses the diff --git a/drivers/media/platform/vivid/Kconfig b/drivers/media/platform/vivid/Kconfig index b36ac19dc6e4..154de92dd809 100644 --- a/drivers/media/platform/vivid/Kconfig +++ b/drivers/media/platform/vivid/Kconfig @@ -26,7 +26,8 @@ config VIDEO_VIVID config VIDEO_VIVID_CEC bool "Enable CEC emulation support" - depends on VIDEO_VIVID && CEC_CORE + depends on VIDEO_VIVID + select CEC_CORE ---help--- When selected the vivid module will emulate the optional HDMI CEC feature. diff --git a/drivers/media/usb/pulse8-cec/Kconfig b/drivers/media/usb/pulse8-cec/Kconfig index 8937f3986a01..18ead44824ba 100644 --- a/drivers/media/usb/pulse8-cec/Kconfig +++ b/drivers/media/usb/pulse8-cec/Kconfig @@ -1,6 +1,7 @@ config USB_PULSE8_CEC tristate "Pulse Eight HDMI CEC" - depends on USB_ACM && CEC_CORE + depends on USB_ACM + select CEC_CORE select SERIO select SERIO_SERPORT ---help--- diff --git a/drivers/media/usb/rainshadow-cec/Kconfig b/drivers/media/usb/rainshadow-cec/Kconfig index 3eb86607efb8..030ef01b1ff0 100644 --- a/drivers/media/usb/rainshadow-cec/Kconfig +++ b/drivers/media/usb/rainshadow-cec/Kconfig @@ -1,6 +1,7 @@ config USB_RAINSHADOW_CEC tristate "RainShadow Tech HDMI CEC" - depends on USB_ACM && CEC_CORE + depends on USB_ACM + select CEC_CORE select SERIO select SERIO_SERPORT ---help--- From e94c32818d865b620c9bbd2656ab3199259ef9ec Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 28 May 2017 05:58:04 -0300 Subject: [PATCH 0418/1065] [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER This config option is strictly speaking independent of the media subsystem since it can be used by drm as well. Besides, it looks odd when drivers select CEC_CORE and MEDIA_CEC_NOTIFIER, that's inconsistent naming. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Kconfig | 2 +- drivers/media/cec/Makefile | 2 +- drivers/media/cec/cec-core.c | 4 ++-- drivers/media/platform/Kconfig | 4 ++-- include/media/cec-notifier.h | 2 +- include/media/cec.h | 4 ++-- 6 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 9ec634e2f2ba..55d9c2b82b7e 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -5,7 +5,7 @@ config CEC_CORE tristate -config MEDIA_CEC_NOTIFIER +config CEC_NOTIFIER bool menuconfig MEDIA_SUPPORT diff --git a/drivers/media/cec/Makefile b/drivers/media/cec/Makefile index 402a6c62a3e8..eaf408e64669 100644 --- a/drivers/media/cec/Makefile +++ b/drivers/media/cec/Makefile @@ -1,6 +1,6 @@ cec-objs := cec-core.o cec-adap.o cec-api.o cec-edid.o -ifeq ($(CONFIG_MEDIA_CEC_NOTIFIER),y) +ifeq ($(CONFIG_CEC_NOTIFIER),y) cec-objs += cec-notifier.o endif diff --git a/drivers/media/cec/cec-core.c b/drivers/media/cec/cec-core.c index f9ebff90f8eb..feeb4c5afa69 100644 --- a/drivers/media/cec/cec-core.c +++ b/drivers/media/cec/cec-core.c @@ -187,7 +187,7 @@ static void cec_devnode_unregister(struct cec_devnode *devnode) put_device(&devnode->dev); } -#ifdef CONFIG_MEDIA_CEC_NOTIFIER +#ifdef CONFIG_CEC_NOTIFIER static void cec_cec_notify(struct cec_adapter *adap, u16 pa) { cec_s_phys_addr(adap, pa, false); @@ -355,7 +355,7 @@ void cec_unregister_adapter(struct cec_adapter *adap) adap->rc = NULL; #endif debugfs_remove_recursive(adap->cec_dir); -#ifdef CONFIG_MEDIA_CEC_NOTIFIER +#ifdef CONFIG_CEC_NOTIFIER if (adap->notifier) cec_notifier_unregister(adap->notifier); #endif diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 017419bef9b1..041cb80a26b1 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -503,7 +503,7 @@ config VIDEO_SAMSUNG_S5P_CEC tristate "Samsung S5P CEC driver" depends on PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST select CEC_CORE - select MEDIA_CEC_NOTIFIER + select CEC_NOTIFIER ---help--- This is a driver for Samsung S5P HDMI CEC interface. It uses the generic CEC framework interface. @@ -514,7 +514,7 @@ config VIDEO_STI_HDMI_CEC tristate "STMicroelectronics STiH4xx HDMI CEC driver" depends on ARCH_STI || COMPILE_TEST select CEC_CORE - select MEDIA_CEC_NOTIFIER + select CEC_NOTIFIER ---help--- This is a driver for STIH4xx HDMI CEC interface. It uses the generic CEC framework interface. diff --git a/include/media/cec-notifier.h b/include/media/cec-notifier.h index eb50ce54b759..413335c8cb52 100644 --- a/include/media/cec-notifier.h +++ b/include/media/cec-notifier.h @@ -29,7 +29,7 @@ struct edid; struct cec_adapter; struct cec_notifier; -#ifdef CONFIG_MEDIA_CEC_NOTIFIER +#if IS_REACHABLE(CONFIG_CEC_CORE) && IS_ENABLED(CONFIG_CEC_NOTIFIER) /** * cec_notifier_get - find or create a new cec_notifier for the given device. diff --git a/include/media/cec.h b/include/media/cec.h index b8eb895731d5..bfa88d4d67e1 100644 --- a/include/media/cec.h +++ b/include/media/cec.h @@ -173,7 +173,7 @@ struct cec_adapter { bool passthrough; struct cec_log_addrs log_addrs; -#ifdef CONFIG_MEDIA_CEC_NOTIFIER +#ifdef CONFIG_CEC_NOTIFIER struct cec_notifier *notifier; #endif @@ -300,7 +300,7 @@ u16 cec_phys_addr_for_input(u16 phys_addr, u8 input); */ int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port); -#ifdef CONFIG_MEDIA_CEC_NOTIFIER +#ifdef CONFIG_CEC_NOTIFIER void cec_register_cec_notifier(struct cec_adapter *adap, struct cec_notifier *notifier); #endif From 20249f84238e006ef7b726d3211a70de7454d045 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 28 May 2017 05:52:16 -0300 Subject: [PATCH 0419/1065] [media] cec: drop MEDIA_CEC_DEBUG Just depend on DEBUG_FS, no need to invent a new kernel config. Especially since CEC can be enabled by drm without enabling MEDIA_SUPPORT. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/Kconfig | 6 ------ drivers/media/cec/cec-adap.c | 2 +- drivers/media/cec/cec-core.c | 4 ++-- 3 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/media/cec/Kconfig b/drivers/media/cec/Kconfig index b7d876b384f6..4e25a950ae6f 100644 --- a/drivers/media/cec/Kconfig +++ b/drivers/media/cec/Kconfig @@ -3,9 +3,3 @@ config MEDIA_CEC_RC depends on CEC_CORE && RC_CORE ---help--- Pass on CEC remote control messages to the RC framework. - -config MEDIA_CEC_DEBUG - bool "HDMI CEC debugfs interface" - depends on CEC_CORE && DEBUG_FS - ---help--- - Turns on the DebugFS interface for CEC devices. diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index f5fe01c9da8a..9dfc79800c71 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -1864,7 +1864,7 @@ void cec_monitor_all_cnt_dec(struct cec_adapter *adap) WARN_ON(call_op(adap, adap_monitor_all_enable, 0)); } -#ifdef CONFIG_MEDIA_CEC_DEBUG +#ifdef CONFIG_DEBUG_FS /* * Log the current state of the CEC adapter. * Very useful for debugging. diff --git a/drivers/media/cec/cec-core.c b/drivers/media/cec/cec-core.c index feeb4c5afa69..2f87748ba4fc 100644 --- a/drivers/media/cec/cec-core.c +++ b/drivers/media/cec/cec-core.c @@ -323,7 +323,7 @@ int cec_register_adapter(struct cec_adapter *adap, } dev_set_drvdata(&adap->devnode.dev, adap); -#ifdef CONFIG_MEDIA_CEC_DEBUG +#ifdef CONFIG_DEBUG_FS if (!top_cec_dir) return 0; @@ -395,7 +395,7 @@ static int __init cec_devnode_init(void) return ret; } -#ifdef CONFIG_MEDIA_CEC_DEBUG +#ifdef CONFIG_DEBUG_FS top_cec_dir = debugfs_create_dir("cec", NULL); if (IS_ERR_OR_NULL(top_cec_dir)) { pr_warn("cec: Failed to create debugfs cec dir\n"); From 963761a0b2e85663ee4a5630f72930885a06598a Mon Sep 17 00:00:00 2001 From: Sean Young Date: Wed, 24 May 2017 06:24:51 -0300 Subject: [PATCH 0420/1065] [media] rc-core: race condition during ir_raw_event_register() A rc device can call ir_raw_event_handle() after rc_allocate_device(), but before rc_register_device() has completed. This is racey because rcdev->raw is set before rcdev->raw->thread has a valid value. Cc: stable@kernel.org Reported-by: kbuild test robot Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-ir-raw.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c index 90f66dc7c0d7..a2fc1a1d58b0 100644 --- a/drivers/media/rc/rc-ir-raw.c +++ b/drivers/media/rc/rc-ir-raw.c @@ -211,7 +211,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_set_idle); */ void ir_raw_event_handle(struct rc_dev *dev) { - if (!dev->raw) + if (!dev->raw || !dev->raw->thread) return; wake_up_process(dev->raw->thread); @@ -490,6 +490,7 @@ int ir_raw_event_register(struct rc_dev *dev) { int rc; struct ir_raw_handler *handler; + struct task_struct *thread; if (!dev) return -EINVAL; @@ -507,13 +508,15 @@ int ir_raw_event_register(struct rc_dev *dev) * because the event is coming from userspace */ if (dev->driver_type != RC_DRIVER_IR_RAW_TX) { - dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw, - "rc%u", dev->minor); + thread = kthread_run(ir_raw_event_thread, dev->raw, "rc%u", + dev->minor); - if (IS_ERR(dev->raw->thread)) { - rc = PTR_ERR(dev->raw->thread); + if (IS_ERR(thread)) { + rc = PTR_ERR(thread); goto out; } + + dev->raw->thread = thread; } mutex_lock(&ir_raw_handler_lock); From 246096690be0742d9bb5f3456d2cb95b68f7b46d Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 1 Jun 2017 16:08:13 -0500 Subject: [PATCH 0421/1065] net: qcom/emac: do not use hardware mdio automatic polling Use software polling (PHY_POLL) to check for link state changes instead of relying on the EMAC's hardware polling feature. Some PHY drivers are unable to get a functioning link because the HW polling is not robust enough. The EMAC is able to poll the PHY on the MDIO bus looking for link state changes (via the Link Status bit in the Status Register at address 0x1). When the link state changes, the EMAC triggers an interrupt and tells the driver what the new state is. The feature eliminates the need for software to poll the MDIO bus. Unfortunately, this feature is incompatible with phylib, because it ignores everything that the PHY core and PHY drivers are trying to do. In particular: 1. It assumes a compatible register set, so PHYs with different registers may not work. 2. It doesn't allow for hardware errata that have work-arounds implemented in the PHY driver. 3. It doesn't support multiple register pages. If the PHY core switches the register set to another page, the EMAC won't know the page has changed and will still attempt to read the same PHY register. 4. It only checks the copper side of the link, not the SGMII side. Some PHY drivers (e.g. at803x) may also check the SGMII side, and report the link as not ready during autonegotiation if the SGMII link is still down. Phylib then waits for another interrupt to query the PHY again, but the EMAC won't send another interrupt because it thinks the link is up. Cc: stable@vger.kernel.org # 4.11.x Tested-by: Manoj Iyer Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 2 +- drivers/net/ethernet/qualcomm/emac/emac-phy.c | 75 +------------------ drivers/net/ethernet/qualcomm/emac/emac.c | 22 +----- 3 files changed, 6 insertions(+), 93 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index cc065ffbe4b5..bcd4708b3745 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -931,7 +931,7 @@ int emac_mac_up(struct emac_adapter *adpt) emac_mac_config(adpt); emac_mac_rx_descs_refill(adpt, &adpt->rx_q); - adpt->phydev->irq = PHY_IGNORE_INTERRUPT; + adpt->phydev->irq = PHY_POLL; ret = phy_connect_direct(netdev, adpt->phydev, emac_adjust_link, PHY_INTERFACE_MODE_SGMII); if (ret) { diff --git a/drivers/net/ethernet/qualcomm/emac/emac-phy.c b/drivers/net/ethernet/qualcomm/emac/emac-phy.c index 441c19366489..18461fcb9815 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-phy.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-phy.c @@ -13,15 +13,11 @@ /* Qualcomm Technologies, Inc. EMAC PHY Controller driver. */ -#include -#include -#include #include #include #include #include #include "emac.h" -#include "emac-mac.h" /* EMAC base register offsets */ #define EMAC_MDIO_CTRL 0x001414 @@ -52,62 +48,10 @@ #define MDIO_WAIT_TIMES 1000 -#define EMAC_LINK_SPEED_DEFAULT (\ - EMAC_LINK_SPEED_10_HALF |\ - EMAC_LINK_SPEED_10_FULL |\ - EMAC_LINK_SPEED_100_HALF |\ - EMAC_LINK_SPEED_100_FULL |\ - EMAC_LINK_SPEED_1GB_FULL) - -/** - * emac_phy_mdio_autopoll_disable() - disable mdio autopoll - * @adpt: the emac adapter - * - * The autopoll feature takes over the MDIO bus. In order for - * the PHY driver to be able to talk to the PHY over the MDIO - * bus, we need to temporarily disable the autopoll feature. - */ -static int emac_phy_mdio_autopoll_disable(struct emac_adapter *adpt) -{ - u32 val; - - /* disable autopoll */ - emac_reg_update32(adpt->base + EMAC_MDIO_CTRL, MDIO_AP_EN, 0); - - /* wait for any mdio polling to complete */ - if (!readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, val, - !(val & MDIO_BUSY), 100, MDIO_WAIT_TIMES * 100)) - return 0; - - /* failed to disable; ensure it is enabled before returning */ - emac_reg_update32(adpt->base + EMAC_MDIO_CTRL, 0, MDIO_AP_EN); - - return -EBUSY; -} - -/** - * emac_phy_mdio_autopoll_disable() - disable mdio autopoll - * @adpt: the emac adapter - * - * The EMAC has the ability to poll the external PHY on the MDIO - * bus for link state changes. This eliminates the need for the - * driver to poll the phy. If if the link state does change, - * the EMAC issues an interrupt on behalf of the PHY. - */ -static void emac_phy_mdio_autopoll_enable(struct emac_adapter *adpt) -{ - emac_reg_update32(adpt->base + EMAC_MDIO_CTRL, 0, MDIO_AP_EN); -} - static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum) { struct emac_adapter *adpt = bus->priv; u32 reg; - int ret; - - ret = emac_phy_mdio_autopoll_disable(adpt); - if (ret) - return ret; emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK, (addr << PHY_ADDR_SHFT)); @@ -122,24 +66,15 @@ static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum) if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, !(reg & (MDIO_START | MDIO_BUSY)), 100, MDIO_WAIT_TIMES * 100)) - ret = -EIO; - else - ret = (reg >> MDIO_DATA_SHFT) & MDIO_DATA_BMSK; + return -EIO; - emac_phy_mdio_autopoll_enable(adpt); - - return ret; + return (reg >> MDIO_DATA_SHFT) & MDIO_DATA_BMSK; } static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) { struct emac_adapter *adpt = bus->priv; u32 reg; - int ret; - - ret = emac_phy_mdio_autopoll_disable(adpt); - if (ret) - return ret; emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK, (addr << PHY_ADDR_SHFT)); @@ -155,11 +90,9 @@ static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, !(reg & (MDIO_START | MDIO_BUSY)), 100, MDIO_WAIT_TIMES * 100)) - ret = -EIO; + return -EIO; - emac_phy_mdio_autopoll_enable(adpt); - - return ret; + return 0; } /* Configure the MDIO bus and connect the external PHY */ diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 28a8cdc36485..98a326faea29 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -50,19 +50,7 @@ #define DMAR_DLY_CNT_DEF 15 #define DMAW_DLY_CNT_DEF 4 -#define IMR_NORMAL_MASK (\ - ISR_ERROR |\ - ISR_GPHY_LINK |\ - ISR_TX_PKT |\ - GPHY_WAKEUP_INT) - -#define IMR_EXTENDED_MASK (\ - SW_MAN_INT |\ - ISR_OVER |\ - ISR_ERROR |\ - ISR_GPHY_LINK |\ - ISR_TX_PKT |\ - GPHY_WAKEUP_INT) +#define IMR_NORMAL_MASK (ISR_ERROR | ISR_OVER | ISR_TX_PKT) #define ISR_TX_PKT (\ TX_PKT_INT |\ @@ -70,10 +58,6 @@ TX_PKT_INT2 |\ TX_PKT_INT3) -#define ISR_GPHY_LINK (\ - GPHY_LINK_UP_INT |\ - GPHY_LINK_DOWN_INT) - #define ISR_OVER (\ RFD0_UR_INT |\ RFD1_UR_INT |\ @@ -187,10 +171,6 @@ irqreturn_t emac_isr(int _irq, void *data) if (status & ISR_OVER) net_warn_ratelimited("warning: TX/RX overflow\n"); - /* link event */ - if (status & ISR_GPHY_LINK) - phy_mac_interrupt(adpt->phydev, !!(status & GPHY_LINK_UP_INT)); - exit: /* enable the interrupt */ writel(irq->mask, adpt->base + EMAC_INT_MASK); From 239e250e4acbc0104d514307029c0839e834a51a Mon Sep 17 00:00:00 2001 From: Richard Narron Date: Sun, 4 Jun 2017 16:23:18 -0700 Subject: [PATCH 0422/1065] fs/ufs: Set UFS default maximum bytes per file This fixes a problem with reading files larger than 2GB from a UFS-2 file system: https://bugzilla.kernel.org/show_bug.cgi?id=195721 The incorrect UFS s_maxsize limit became a problem as of commit c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") which started using s_maxbytes to avoid a page index overflow in do_generic_file_read(). That caused files to be truncated on UFS-2 file systems because the default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it. Here I simply increase the default to a common value used by other file systems. Signed-off-by: Richard Narron Cc: Al Viro Cc: Will B Cc: Theodore Ts'o Cc: # v4.9 and backports of c2a9737f45e2 Signed-off-by: Linus Torvalds --- fs/ufs/super.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/ufs/super.c b/fs/ufs/super.c index 131b2b77c818..29ecaf739449 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -812,9 +812,8 @@ static int ufs_fill_super(struct super_block *sb, void *data, int silent) uspi->s_dirblksize = UFS_SECTOR_SIZE; super_block_offset=UFS_SBLOCK; - /* Keep 2Gig file limit. Some UFS variants need to override - this but as I don't know which I'll let those in the know loosen - the rules */ + sb->s_maxbytes = MAX_LFS_FILESIZE; + switch (sbi->s_mount_opt & UFS_MOUNT_UFSTYPE) { case UFS_MOUNT_UFSTYPE_44BSD: UFSD("ufstype=44bsd\n"); From 3c2993b8c6143d8a5793746a54eba8f86f95240f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 4 Jun 2017 16:47:43 -0700 Subject: [PATCH 0423/1065] Linux 4.12-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 470bd4d9513a..853ae9179af9 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 12 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Fearless Coyote # *DOCUMENTATION* From 5f733ee68f9a4df94775299ac6a7ab260704f6ed Mon Sep 17 00:00:00 2001 From: Liam McBirnie Date: Thu, 1 Jun 2017 15:36:01 +1000 Subject: [PATCH 0424/1065] ip6_tunnel: fix traffic class routing for tunnels ip6_route_output() requires that the flowlabel contains the traffic class for policy routing. Commit 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") removed the code which previously added the traffic class to the flowlabel. The traffic class is added here because only route lookup needs the flowlabel to contain the traffic class. Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") Signed-off-by: Liam McBirnie Acked-by: Peter Dawson Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 7ae6c503f1ca..9b37f9747fc6 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1095,6 +1095,9 @@ int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield, if (!dst) { route_lookup: + /* add dsfield to flowlabel for route lookup */ + fl6->flowlabel = ip6_make_flowinfo(dsfield, fl6->flowlabel); + dst = ip6_route_output(net, NULL, fl6); if (dst->error) From a7c0b8bee212e22725196fda8389bff9ade3ac68 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 2 Jun 2017 17:54:08 +0200 Subject: [PATCH 0425/1065] amd-xgbe: use PAGE_ALLOC_COSTLY_ORDER in xgbe_map_rx_buffer xgbe_map_rx_buffer is rather confused about what PAGE_ALLOC_COSTLY_ORDER means. It uses PAGE_ALLOC_COSTLY_ORDER-1 assuming that PAGE_ALLOC_COSTLY_ORDER is the first costly order which is not the case actually because orders larger than that are costly. And even that applies only to sleeping allocations which is not the case here. We simply do not perform any costly operations like reclaim or compaction for those. Simplify the code by dropping the order calculation and use PAGE_ALLOC_COSTLY_ORDER directly. Signed-off-by: Michal Hocko Acked-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-desc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-desc.c b/drivers/net/ethernet/amd/xgbe/xgbe-desc.c index b3bc87fe3764..0a98c369df20 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-desc.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-desc.c @@ -324,7 +324,7 @@ static int xgbe_map_rx_buffer(struct xgbe_prv_data *pdata, struct xgbe_ring *ring, struct xgbe_ring_data *rdata) { - int order, ret; + int ret; if (!ring->rx_hdr_pa.pages) { ret = xgbe_alloc_pages(pdata, &ring->rx_hdr_pa, GFP_ATOMIC, 0); @@ -333,9 +333,8 @@ static int xgbe_map_rx_buffer(struct xgbe_prv_data *pdata, } if (!ring->rx_buf_pa.pages) { - order = max_t(int, PAGE_ALLOC_COSTLY_ORDER - 1, 0); ret = xgbe_alloc_pages(pdata, &ring->rx_buf_pa, GFP_ATOMIC, - order); + PAGE_ALLOC_COSTLY_ORDER); if (ret) return ret; } From 38b257938ac6655d0d6333743303231b9c465ec1 Mon Sep 17 00:00:00 2001 From: Soheil Hassas Yeganeh Date: Fri, 2 Jun 2017 12:38:22 -0400 Subject: [PATCH 0426/1065] sock: reset sk_err when the error queue is empty Prior to f5f99309fa74 (sock: do not set sk_err in sock_dequeue_err_skb), sk_err was reset to the error of the skb on the head of the error queue. Applications, most notably ping, are relying on this behavior to reset sk_err for ICMP packets. Set sk_err to the ICMP error when there is an ICMP packet at the head of the error queue. Fixes: f5f99309fa74 (sock: do not set sk_err in sock_dequeue_err_skb) Reported-by: Cyril Hrubis Tested-by: Cyril Hrubis Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Eric Dumazet Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- net/core/skbuff.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 346d3e85dfbc..b1be7c01efe2 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3754,8 +3754,11 @@ struct sk_buff *sock_dequeue_err_skb(struct sock *sk) spin_lock_irqsave(&q->lock, flags); skb = __skb_dequeue(q); - if (skb && (skb_next = skb_peek(q))) + if (skb && (skb_next = skb_peek(q))) { icmp_next = is_icmp_err_skb(skb_next); + if (icmp_next) + sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin; + } spin_unlock_irqrestore(&q->lock, flags); if (is_icmp_err_skb(skb) && !icmp_next) From 9a1c44d989bff4c992b8b9a112d9fda275ea5515 Mon Sep 17 00:00:00 2001 From: Eric Garver Date: Fri, 2 Jun 2017 14:54:10 -0400 Subject: [PATCH 0427/1065] geneve: fix needed_headroom and max_mtu for collect_metadata Since commit 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") when using COLLECT_METADATA geneve devices are created with too small of a needed_headroom and too large of a max_mtu. This is because ip_tunnel_info_af() is not valid with the device level info when using COLLECT_METADATA and we mistakenly fall into the IPv4 case. For COLLECT_METADATA, always use the worst case of ipv6 since both sockets are created. Fixes: 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") Signed-off-by: Eric Garver Acked-by: Pravin B Shelar Signed-off-by: David S. Miller --- drivers/net/geneve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 959fd12d2e67..6ebb0f559a42 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1133,7 +1133,7 @@ static int geneve_configure(struct net *net, struct net_device *dev, /* make enough headroom for basic scenario */ encap_len = GENEVE_BASE_HLEN + ETH_HLEN; - if (ip_tunnel_info_af(info) == AF_INET) { + if (!metadata && ip_tunnel_info_af(info) == AF_INET) { encap_len += sizeof(struct iphdr); dev->max_mtu -= sizeof(struct iphdr); } else { From e3e86b5119f81e5e2499bea7ea1ebe8ac6aab789 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 4 Jun 2017 21:41:10 -0400 Subject: [PATCH 0428/1065] ipv6: Fix leak in ipv6_gso_segment(). If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options") Reported-by: Ben Hutchings Signed-off-by: David S. Miller --- net/ipv6/ip6_offload.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index 280268f1dd7b..cdb3728faca7 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -116,8 +116,10 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, if (udpfrag) { int err = ip6_find_1stfragopt(skb, &prevhdr); - if (err < 0) + if (err < 0) { + kfree_skb_list(segs); return ERR_PTR(err); + } fptr = (struct frag_hdr *)((u8 *)ipv6h + err); fptr->frag_off = htons(offset); if (skb->next) From b07ac9894644202614ca87c69f3f45e424a82fef Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 2 Jun 2017 22:05:23 -0700 Subject: [PATCH 0429/1065] net: dsa: Fix stale cpu_switch reference after unbind then bind Commit 9520ed8fb841 ("net: dsa: use cpu_switch instead of ds[0]") replaced the use of dst->ds[0] with dst->cpu_switch since that is functionally equivalent, however, we can now run into an use after free scenario after unbinding then rebinding the switch driver. The use after free happens because we do correctly initialize dst->cpu_switch the first time we probe in dsa_cpu_parse(), then we unbind the driver: dsa_dst_unapply() is called, and we rebind again. dst->cpu_switch now points to a freed "ds" structure, and so when we finally dereference it in dsa_cpu_port_ethtool_setup(), we oops. To fix this, simply set dst->cpu_switch to NULL in dsa_dst_unapply() which guarantees that we always correctly re-assign dst->cpu_switch in dsa_cpu_parse(). Fixes: 9520ed8fb841 ("net: dsa: use cpu_switch instead of ds[0]") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- net/dsa/dsa2.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index 033b3bfb63dc..7796580e99ee 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -484,8 +484,10 @@ static void dsa_dst_unapply(struct dsa_switch_tree *dst) dsa_ds_unapply(dst, ds); } - if (dst->cpu_switch) + if (dst->cpu_switch) { dsa_cpu_port_ethtool_restore(dst->cpu_switch); + dst->cpu_switch = NULL; + } pr_info("DSA: tree %d unapplied\n", dst->tree); dst->applied = false; From 77d4b1d36926a9b8387c6b53eeba42bcaaffcea3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 3 Jun 2017 09:29:25 -0700 Subject: [PATCH 0430/1065] net: ping: do not abuse udp_poll() Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by: Eric Dumazet Reported-by: Sasha Levin Cc: Solar Designer Cc: Vasiliy Kulikov Cc: Lorenzo Colitti Acked-By: Lorenzo Colitti Tested-By: Lorenzo Colitti Signed-off-by: David S. Miller --- include/net/ipv6.h | 1 + net/ipv4/af_inet.c | 2 +- net/ipv6/ping.c | 2 +- net/ipv6/raw.c | 2 +- 4 files changed, 4 insertions(+), 3 deletions(-) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index dbf0abba33b8..3e505bbff8ca 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -1007,6 +1007,7 @@ int inet6_hash_connect(struct inet_timewait_death_row *death_row, */ extern const struct proto_ops inet6_stream_ops; extern const struct proto_ops inet6_dgram_ops; +extern const struct proto_ops inet6_sockraw_ops; struct group_source_req; struct group_filter; diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index f3dad1661343..58925b6597de 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1043,7 +1043,7 @@ static struct inet_protosw inetsw_array[] = .type = SOCK_DGRAM, .protocol = IPPROTO_ICMP, .prot = &ping_prot, - .ops = &inet_dgram_ops, + .ops = &inet_sockraw_ops, .flags = INET_PROTOSW_REUSE, }, diff --git a/net/ipv6/ping.c b/net/ipv6/ping.c index 9b522fa90e6d..ac826dd338ff 100644 --- a/net/ipv6/ping.c +++ b/net/ipv6/ping.c @@ -192,7 +192,7 @@ static struct inet_protosw pingv6_protosw = { .type = SOCK_DGRAM, .protocol = IPPROTO_ICMPV6, .prot = &pingv6_prot, - .ops = &inet6_dgram_ops, + .ops = &inet6_sockraw_ops, .flags = INET_PROTOSW_REUSE, }; diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 1f992d9e261d..60be012fe708 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1338,7 +1338,7 @@ void raw6_proc_exit(void) #endif /* CONFIG_PROC_FS */ /* Same as inet6_dgram_ops, sans udp_poll. */ -static const struct proto_ops inet6_sockraw_ops = { +const struct proto_ops inet6_sockraw_ops = { .family = PF_INET6, .owner = THIS_MODULE, .release = inet6_release, From b699d0035836f6712917a41e7ae58d84359b8ff9 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Sun, 4 Jun 2017 14:43:43 +0800 Subject: [PATCH 0431/1065] sit: reload iphdr in ipip6_rcv Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller --- net/ipv6/sit.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 61e5902f0687..af832e7ce80f 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -657,6 +657,7 @@ static int ipip6_rcv(struct sk_buff *skb) if (iptunnel_pull_header(skb, 0, htons(ETH_P_IPV6), !net_eq(tunnel->net, dev_net(tunnel->dev)))) goto out; + iph = ip_hdr(skb); err = IP_ECN_decapsulate(iph, skb); if (unlikely(err)) { From 6dc06c08bef1c746ff8da33dab677cfbacdcad32 Mon Sep 17 00:00:00 2001 From: Talat Batheesh Date: Sun, 4 Jun 2017 14:30:07 +0300 Subject: [PATCH 0432/1065] net/mlx4: Fix the check in attaching steering rules Our previous patch (cited below) introduced a regression for RAW Eth QPs. Fix it by checking if the QP number provided by user-space exists, hence allowing steering rules to be added for valid QPs only. Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring") Reported-by: Or Gerlitz Signed-off-by: Talat Batheesh Signed-off-by: Tariq Toukan Acked-by: Or Gerlitz Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 5 ----- drivers/net/ethernet/mellanox/mlx4/mcg.c | 15 +++++++++++---- drivers/net/ethernet/mellanox/mlx4/qp.c | 13 +++++++++++++ include/linux/mlx4/qp.h | 1 + 4 files changed, 25 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index ae5fdc2df654..ffbcb27c05e5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -1562,11 +1562,6 @@ static int mlx4_en_flow_replace(struct net_device *dev, qpn = priv->drop_qp.qpn; else if (cmd->fs.ring_cookie & EN_ETHTOOL_QP_ATTACH) { qpn = cmd->fs.ring_cookie & (EN_ETHTOOL_QP_ATTACH - 1); - if (qpn < priv->rss_map.base_qpn || - qpn >= priv->rss_map.base_qpn + priv->rx_ring_num) { - en_warn(priv, "rxnfc: QP (0x%x) doesn't exist\n", qpn); - return -EINVAL; - } } else { if (cmd->fs.ring_cookie >= priv->rx_ring_num) { en_warn(priv, "rxnfc: RX ring (%llu) doesn't exist\n", diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index 1a670b681555..0710b3677464 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -35,6 +35,7 @@ #include #include +#include #include #include "mlx4.h" @@ -985,16 +986,21 @@ int mlx4_flow_attach(struct mlx4_dev *dev, if (IS_ERR(mailbox)) return PTR_ERR(mailbox); + if (!mlx4_qp_lookup(dev, rule->qpn)) { + mlx4_err_rule(dev, "QP doesn't exist\n", rule); + ret = -EINVAL; + goto out; + } + trans_rule_ctrl_to_hw(rule, mailbox->buf); size += sizeof(struct mlx4_net_trans_rule_hw_ctrl); list_for_each_entry(cur, &rule->list, list) { ret = parse_trans_rule(dev, cur, mailbox->buf + size); - if (ret < 0) { - mlx4_free_cmd_mailbox(dev, mailbox); - return ret; - } + if (ret < 0) + goto out; + size += ret; } @@ -1021,6 +1027,7 @@ int mlx4_flow_attach(struct mlx4_dev *dev, } } +out: mlx4_free_cmd_mailbox(dev, mailbox); return ret; diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c index 2d6abd4662b1..ad92d2311478 100644 --- a/drivers/net/ethernet/mellanox/mlx4/qp.c +++ b/drivers/net/ethernet/mellanox/mlx4/qp.c @@ -384,6 +384,19 @@ static void mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn) __mlx4_qp_free_icm(dev, qpn); } +struct mlx4_qp *mlx4_qp_lookup(struct mlx4_dev *dev, u32 qpn) +{ + struct mlx4_qp_table *qp_table = &mlx4_priv(dev)->qp_table; + struct mlx4_qp *qp; + + spin_lock(&qp_table->lock); + + qp = __mlx4_qp_lookup(dev, qpn); + + spin_unlock(&qp_table->lock); + return qp; +} + int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp, gfp_t gfp) { struct mlx4_priv *priv = mlx4_priv(dev); diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index b4ee8f62ce8d..8e2828d48d7f 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -470,6 +470,7 @@ struct mlx4_update_qp_params { u16 rate_val; }; +struct mlx4_qp *mlx4_qp_lookup(struct mlx4_dev *dev, u32 qpn); int mlx4_update_qp(struct mlx4_dev *dev, u32 qpn, enum mlx4_update_qp_attr attr, struct mlx4_update_qp_params *params); From 1195892c091a15cc862f4e202482a36adc924e12 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 2 Jun 2017 18:43:30 -0300 Subject: [PATCH 0433/1065] powerpc/kernel: Fix FP and vector register restoration Currently tsk->thread->load_vec and load_fp are not initialized during task creation, which can lead to garbage values in these variables (non-zero values). These variables will be checked later in restore_math() to validate if the FP and vector registers are being utilized. Since these values might be non-zero, the restore_math() will continue to save the FP and vectors even if they were never utilized by the userspace application. load_fp and load_vec counters will then overflow (they wrap at 255) and the FP and Altivec will be finally disabled, but before that condition is reached (counter overflow) several context switches will have restored FP and vector registers without need, causing a performance degradation. Fixes: 70fe3d980f5f ("powerpc: Restore FPU/VEC/VSX if previously used") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Breno Leitao Signed-off-by: Gustavo Romero Acked-by: Anton Blanchard Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index baae104b16c7..a9435397eab8 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1666,6 +1666,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) #ifdef CONFIG_VSX current->thread.used_vsr = 0; #endif + current->thread.load_fp = 0; memset(¤t->thread.fp_state, 0, sizeof(current->thread.fp_state)); current->thread.fp_save_area = NULL; #ifdef CONFIG_ALTIVEC @@ -1674,6 +1675,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) current->thread.vr_save_area = NULL; current->thread.vrsave = 0; current->thread.used_vr = 0; + current->thread.load_vec = 0; #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_SPE memset(current->thread.evr, 0, sizeof(current->thread.evr)); From ae1d557d8f30cb097b4d1f2ab04fa294588ee1cf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20S=C3=BCnkenberg?= Date: Sun, 4 Jun 2017 19:18:39 +0200 Subject: [PATCH 0434/1065] x86/cpu/cyrix: Add alternative Device ID of Geode GX1 SoC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A SoC variant of Geode GX1, notably NSC branded SC1100, seems to report an inverted Device ID in its DIR0 configuration register, specifically 0xb instead of the expected 0x4. Catch this presumably quirky version so it's properly recognized as GX1 and has its cache switched to write-back mode, which provides a significant performance boost in most workloads. SC1100's datasheet "Geode™ SC1100 Information Appliance On a Chip", states in section 1.1.7.1 "Device ID" that device identification values are specified in SC1100's device errata. These, however, seem to not have been publicly released. Wading through a number of boot logs and /proc/cpuinfo dumps found on pastebin and blogs, this patch should mostly be relevant for a number of now admittedly aging Soekris NET4801 and PC Engines WRAP devices, the latter being the platform this issue was discovered on. Performance impact was verified using "openssl speed", with write-back caching scaling throughput between -3% and +41%. Signed-off-by: Christian Sünkenberg Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1496596719.26725.14.camel@student.kit.edu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/cyrix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index a70fd61095f8..6f077445647a 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -255,6 +255,7 @@ static void init_cyrix(struct cpuinfo_x86 *c) break; case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */ + case 11: /* GX1 with inverted Device ID */ #ifdef CONFIG_PCI { u32 vendor, device; From 7ef4783e19a84fe1e8b58f4c27b858dfdcaef207 Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Wed, 24 May 2017 10:30:18 +0100 Subject: [PATCH 0435/1065] ARM: 8676/1: NOMMU: provide pgprot_device() macro NOMMU build leads to the following error: CC drivers/pci/mmap.o drivers/pci/mmap.c: In function 'pci_mmap_resource_range': drivers/pci/mmap.c:60:3: error: implicit declaration of function 'pgprot_device' [-Werror=implicit-function-declaration] vma->vm_page_prot = pgprot_device(vma->vm_page_prot); ^ cc1: some warnings being treated as errors scripts/Makefile.build:302: recipe for target 'drivers/pci/mmap.o' failed make[2]: *** [drivers/pci/mmap.o] Error 1 scripts/Makefile.build:561: recipe for target 'drivers/pci' failed make[1]: *** [drivers/pci] Error 2 Makefile:1016: recipe for target 'drivers' failed make: *** [drivers] Error 2 Fix it with support of pgprot_device() macro for NOMMU. Fixes: 00d2904ffeac ("ARM/PCI: Use generic pci_mmap_resource_range()") Signed-off-by: Vladimir Murzin Signed-off-by: Russell King --- arch/arm/include/asm/pgtable-nommu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index 302240c19a5a..a0d726a47c8a 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -66,6 +66,7 @@ typedef pte_t *pte_addr_t; #define pgprot_noncached(prot) (prot) #define pgprot_writecombine(prot) (prot) #define pgprot_dmacoherent(prot) (prot) +#define pgprot_device(prot) (prot) /* From 06a4b6d009a1b74a6ec46c5418b46cc53a79fcb8 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 24 May 2017 15:31:57 +0100 Subject: [PATCH 0436/1065] ARM: 8677/1: boot/compressed: fix decompressor header layout for v7-M As reported by Patrice, the header layout of the decompressor is incorrect when building for v7-M. In this case, the __nop macro resolves to 'mov r0, r0', which is emitted as a narrow encoding, resulting in the header data fields to end up at lower offsets than required. Given the variety of targets we need to support with the same code, the startup sequence is a bit of a jumble, and uses instructions and macros whose encoding widths cannot be specified (badr), or only exist in a narrow encoding (bx) So force the use of a wide encoding in __nop, and replace the start sequence with a simple jump to the label marking the start of code, preceded by a Thumb2 mode switch if required (using explicit wide encodings where appropriate). The label itself can be moved to the start of code [where it belongs] due to the larger range of branch instructions as compared to adr instructions. Reported-by: Patrice CHOTARD Acked-by: Nicolas Pitre Signed-off-by: Ard Biesheuvel Signed-off-by: Russell King --- arch/arm/boot/compressed/efi-header.S | 4 +--- arch/arm/boot/compressed/head.S | 17 ++++++++++------- 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S index 9d5dc4fda3c1..3f7d1b74c5e0 100644 --- a/arch/arm/boot/compressed/efi-header.S +++ b/arch/arm/boot/compressed/efi-header.S @@ -17,14 +17,12 @@ @ there. .inst 'M' | ('Z' << 8) | (0x1310 << 16) @ tstne r0, #0x4d000 #else - mov r0, r0 + W(mov) r0, r0 #endif .endm .macro __EFI_HEADER #ifdef CONFIG_EFI_STUB - b __efi_start - .set start_offset, __efi_start - start .org start + 0x3c @ diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7c711ba61417..8a756870c238 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -130,19 +130,22 @@ start: .rept 7 __nop .endr - ARM( mov r0, r0 ) - ARM( b 1f ) - THUMB( badr r12, 1f ) - THUMB( bx r12 ) +#ifndef CONFIG_THUMB2_KERNEL + mov r0, r0 +#else + AR_CLASS( sub pc, pc, #3 ) @ A/R: switch to Thumb2 mode + M_CLASS( nop.w ) @ M: already in Thumb2 mode + .thumb +#endif + W(b) 1f .word _magic_sig @ Magic numbers to help the loader .word _magic_start @ absolute load/run zImage address .word _magic_end @ zImage end address .word 0x04030201 @ endianness flag - THUMB( .thumb ) -1: __EFI_HEADER - + __EFI_HEADER +1: ARM_BE8( setend be ) @ go BE8 if compiled for BE8 AR_CLASS( mrs r9, cpsr ) #ifdef CONFIG_ARM_VIRT_EXT From 57caf4ec2b8bfbcb4f738ab5a12eedf3a8786045 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 5 Jun 2017 14:51:18 +0200 Subject: [PATCH 0437/1065] cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min() Commit c5a2ee7dde89 (cpufreq: intel_pstate: Active mode P-state limits rework) incorrectly assumed that pstate.turbo_pstate would always be nonzero for CPU0 in min_perf_pct_min() if cpufreq_register_driver() had succeeded which may not be the case in virtualized environments. If that assumption doesn't hold, it leads to an early crash on boot in intel_pstate_register_driver(), so add a sanity check to min_perf_pct_min() to prevent the crash from happening. Fixes: c5a2ee7dde89 (cpufreq: intel_pstate: Active mode P-state limits rework) Reported-and-tested-by: Jongman Heo Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index b7de5bd76a31..eb1158532de3 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -571,9 +571,10 @@ static inline void update_turbo_state(void) static int min_perf_pct_min(void) { struct cpudata *cpu = all_cpu_data[0]; + int turbo_pstate = cpu->pstate.turbo_pstate; - return DIV_ROUND_UP(cpu->pstate.min_pstate * 100, - cpu->pstate.turbo_pstate); + return turbo_pstate ? + DIV_ROUND_UP(cpu->pstate.min_pstate * 100, turbo_pstate) : 0; } static s16 intel_pstate_get_epb(struct cpudata *cpu_data) From 1e0ce2a1ee0d5fb334e82e80600f1e8e77df525c Mon Sep 17 00:00:00 2001 From: Anmol Sarma Date: Sat, 3 Jun 2017 17:40:54 +0530 Subject: [PATCH 0438/1065] net: Update TCP congestion control documentation Update tcp.txt to fix mandatory congestion control ops and default CCA selection. Also, fix comment in tcp.h for undo_cwnd. Signed-off-by: Anmol Sarma Signed-off-by: David S. Miller --- Documentation/networking/tcp.txt | 31 +++++++++++++------------------ include/net/tcp.h | 2 +- 2 files changed, 14 insertions(+), 19 deletions(-) diff --git a/Documentation/networking/tcp.txt b/Documentation/networking/tcp.txt index bdc4c0db51e1..9c7139d57e57 100644 --- a/Documentation/networking/tcp.txt +++ b/Documentation/networking/tcp.txt @@ -1,7 +1,7 @@ TCP protocol ============ -Last updated: 9 February 2008 +Last updated: 3 June 2017 Contents ======== @@ -29,18 +29,19 @@ As of 2.6.13, Linux supports pluggable congestion control algorithms. A congestion control mechanism can be registered through functions in tcp_cong.c. The functions used by the congestion control mechanism are registered via passing a tcp_congestion_ops struct to -tcp_register_congestion_control. As a minimum name, ssthresh, -cong_avoid must be valid. +tcp_register_congestion_control. As a minimum, the congestion control +mechanism must provide a valid name and must implement either ssthresh, +cong_avoid and undo_cwnd hooks or the "omnipotent" cong_control hook. Private data for a congestion control mechanism is stored in tp->ca_priv. tcp_ca(tp) returns a pointer to this space. This is preallocated space - it is important to check the size of your private data will fit this space, or -alternatively space could be allocated elsewhere and a pointer to it could +alternatively, space could be allocated elsewhere and a pointer to it could be stored here. There are three kinds of congestion control algorithms currently: The simplest ones are derived from TCP reno (highspeed, scalable) and just -provide an alternative the congestion window calculation. More complex +provide an alternative congestion window calculation. More complex ones like BIC try to look at other events to provide better heuristics. There are also round trip time based algorithms like Vegas and Westwood+. @@ -49,21 +50,15 @@ Good TCP congestion control is a complex problem because the algorithm needs to maintain fairness and performance. Please review current research and RFC's before developing new modules. -The method that is used to determine which congestion control mechanism is -determined by the setting of the sysctl net.ipv4.tcp_congestion_control. -The default congestion control will be the last one registered (LIFO); -so if you built everything as modules, the default will be reno. If you -build with the defaults from Kconfig, then CUBIC will be builtin (not a -module) and it will end up the default. +The default congestion control mechanism is chosen based on the +DEFAULT_TCP_CONG Kconfig parameter. If you really want a particular default +value then you can set it using sysctl net.ipv4.tcp_congestion_control. The +module will be autoloaded if needed and you will get the expected protocol. If +you ask for an unknown congestion method, then the sysctl attempt will fail. -If you really want a particular default value then you will need -to set it with the sysctl. If you use a sysctl, the module will be autoloaded -if needed and you will get the expected protocol. If you ask for an -unknown congestion method, then the sysctl attempt will fail. - -If you remove a tcp congestion control module, then you will get the next +If you remove a TCP congestion control module, then you will get the next available one. Since reno cannot be built as a module, and cannot be -deleted, it will always be available. +removed, it will always be available. How the new TCP output machine [nyi] works. =========================================== diff --git a/include/net/tcp.h b/include/net/tcp.h index 38a7427ae902..be6223c586fa 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -924,7 +924,7 @@ struct tcp_congestion_ops { void (*cwnd_event)(struct sock *sk, enum tcp_ca_event ev); /* call when ack arrives (optional) */ void (*in_ack_event)(struct sock *sk, u32 flags); - /* new value of cwnd after loss (optional) */ + /* new value of cwnd after loss (required) */ u32 (*undo_cwnd)(struct sock *sk); /* hook for packet ack accounting (optional) */ void (*pkts_acked)(struct sock *sk, const struct ack_sample *sample); From 6044bd4a7d580d4459b992bc6631c817486a1514 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Mon, 5 Jun 2017 08:57:21 +0800 Subject: [PATCH 0439/1065] devlink: fix potential memort leak We must free allocated skb when genlmsg_put() return fails. Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)") Signed-off-by: Haishuang Yan Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- net/core/devlink.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/core/devlink.c b/net/core/devlink.c index b0b87a292e7c..a0adfc31a3fe 100644 --- a/net/core/devlink.c +++ b/net/core/devlink.c @@ -1680,8 +1680,10 @@ start_again: hdr = genlmsg_put(skb, info->snd_portid, info->snd_seq, &devlink_nl_family, NLM_F_MULTI, cmd); - if (!hdr) + if (!hdr) { + nlmsg_free(skb); return -EMSGSIZE; + } if (devlink_nl_put_handle(skb, devlink)) goto nla_put_failure; @@ -2098,8 +2100,10 @@ start_again: hdr = genlmsg_put(skb, info->snd_portid, info->snd_seq, &devlink_nl_family, NLM_F_MULTI, cmd); - if (!hdr) + if (!hdr) { + nlmsg_free(skb); return -EMSGSIZE; + } if (devlink_nl_put_handle(skb, devlink)) goto nla_put_failure; From 6c6ab3e73b391b38c9749c77775bf21479ed7d60 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 4 Jun 2017 19:46:53 -0700 Subject: [PATCH 0440/1065] net: phy: fix kernel-doc warnings Fix kernel-doc warnings (typo) in drivers/net/phy/phy.c: ..//drivers/net/phy/phy.c:259: warning: No description found for parameter 'features' ..//drivers/net/phy/phy.c:259: warning: Excess function parameter 'feature' description in 'phy_lookup_setting' Signed-off-by: Randy Dunlap Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 82ab8fb82587..7524caa0f29d 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -241,7 +241,7 @@ static const struct phy_setting settings[] = { * phy_lookup_setting - lookup a PHY setting * @speed: speed to match * @duplex: duplex to match - * @feature: allowed link modes + * @features: allowed link modes * @exact: an exact match is required * * Search the settings array for a setting that matches the speed and From 269f9883fe254d109afdfc657875c456d6fabb08 Mon Sep 17 00:00:00 2001 From: Ido Shamay Date: Mon, 5 Jun 2017 10:44:56 +0300 Subject: [PATCH 0441/1065] net/mlx4: Check if Granular QoS per VF has been enabled before updating QP qos_vport The Granular QoS per VF feature must be enabled in FW before it can be used. Thus, the driver cannot modify a QP's qos_vport value (via the UPDATE_QP FW command) if the feature has not been enabled -- the FW returns an error if this is attempted. Fixes: 08068cd5683f ("net/mlx4: Added qos_vport QP configuration in VST mode") Signed-off-by: Ido Shamay Signed-off-by: Jack Morgenstein Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/qp.c | 6 ++++++ .../ethernet/mellanox/mlx4/resource_tracker.c | 16 +++++++++++----- 2 files changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c index ad92d2311478..5a310d313e94 100644 --- a/drivers/net/ethernet/mellanox/mlx4/qp.c +++ b/drivers/net/ethernet/mellanox/mlx4/qp.c @@ -484,6 +484,12 @@ int mlx4_update_qp(struct mlx4_dev *dev, u32 qpn, } if (attr & MLX4_UPDATE_QP_QOS_VPORT) { + if (!(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_QOS_VPP)) { + mlx4_warn(dev, "Granular QoS per VF is not enabled\n"); + err = -EOPNOTSUPP; + goto out; + } + qp_mask |= 1ULL << MLX4_UPD_QP_MASK_QOS_VPP; cmd->qp_context.qos_vport = params->qos_vport; } diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 07516545474f..812783865205 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -5255,6 +5255,13 @@ void mlx4_delete_all_resources_for_slave(struct mlx4_dev *dev, int slave) mutex_unlock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex); } +static void update_qos_vpp(struct mlx4_update_qp_context *ctx, + struct mlx4_vf_immed_vlan_work *work) +{ + ctx->qp_mask |= cpu_to_be64(1ULL << MLX4_UPD_QP_MASK_QOS_VPP); + ctx->qp_context.qos_vport = work->qos_vport; +} + void mlx4_vf_immed_vlan_work_handler(struct work_struct *_work) { struct mlx4_vf_immed_vlan_work *work = @@ -5369,11 +5376,10 @@ void mlx4_vf_immed_vlan_work_handler(struct work_struct *_work) qp->sched_queue & 0xC7; upd_context->qp_context.pri_path.sched_queue |= ((work->qos & 0x7) << 3); - upd_context->qp_mask |= - cpu_to_be64(1ULL << - MLX4_UPD_QP_MASK_QOS_VPP); - upd_context->qp_context.qos_vport = - work->qos_vport; + + if (dev->caps.flags2 & + MLX4_DEV_CAP_FLAG2_QOS_VPP) + update_qos_vpp(upd_context, work); } err = mlx4_cmd(dev, mailbox->dma, From 3def03441e53e29eed3afd9009974a5a42bf124a Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Sat, 20 May 2017 13:27:00 +0200 Subject: [PATCH 0442/1065] genksyms: add printf format attribute to error_with_pos() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When compiling with -Wsuggest-attribute=format in HOSTCFLAGS, gcc complains that error_with_pos() may be declared with a printf format attribute: scripts/genksyms/genksyms.c:726:3: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] vfprintf(stderr, fmt, args); ^~~~~~~~ This would allow catching printf-format errors at compile time in callers to error_with_pos(). Add this attribute. Signed-off-by: Nicolas Iooss Signed-off-by: Masahiro Yamada --- scripts/genksyms/genksyms.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/genksyms/genksyms.h b/scripts/genksyms/genksyms.h index 3bffdcaaa274..b724a0290c75 100644 --- a/scripts/genksyms/genksyms.h +++ b/scripts/genksyms/genksyms.h @@ -75,7 +75,7 @@ struct string_list *copy_list_range(struct string_list *start, int yylex(void); int yyparse(void); -void error_with_pos(const char *, ...); +void error_with_pos(const char *, ...) __attribute__ ((format(printf, 1, 2))); /*----------------------------------------------------------------------*/ #define xmalloc(size) ({ void *__ptr = malloc(size); \ From 501e7a4689378f8b1690089bfdd4f1e12ec22903 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Fri, 2 Jun 2017 11:21:34 -0400 Subject: [PATCH 0443/1065] NFSv4.2: Don't send mode again in post-EXCLUSIVE4_1 SETATTR with umask Now that we have umask support, we shouldn't re-send the mode in a SETATTR following an exclusive CREATE, or we risk having the same problem fixed in commit 5334c5bdac92 ("NFS: Send attributes in OPEN request for NFS4_CREATE_EXCLUSIVE4_1"), which is that files with S_ISGID will have that bit stripped away. Signed-off-by: Benjamin Coddington Fixes: dff25ddb4808 ("nfs: add support for the umask attribute") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index c08c46a3b8cd..4e43fd1270c4 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2589,7 +2589,8 @@ static inline void nfs4_exclusive_attrset(struct nfs4_opendata *opendata, /* Except MODE, it seems harmless of setting twice. */ if (opendata->o_arg.createmode != NFS4_CREATE_EXCLUSIVE && - attrset[1] & FATTR4_WORD1_MODE) + (attrset[1] & FATTR4_WORD1_MODE || + attrset[2] & FATTR4_WORD2_MODE_UMASK)) sattr->ia_valid &= ~ATTR_MODE; if (attrset[2] & FATTR4_WORD2_SECURITY_LABEL) From 1deec1bd96ccd8beb04d2112a6d12fe20505c3a6 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Wed, 31 May 2017 21:01:03 +0900 Subject: [PATCH 0444/1065] perf header: Set proper module name when build-id event found When perf processes build-id event, it creates DSOs with the build-id. But it didn't set the module short name (like '[module-name]') so when processing a kernel mmap event of the module, it cannot found the DSO as it only checks the short names. That leads for perf to create a same DSO without the build-id info and it'll lookup the system path even if the DSO is already in the build-id cache. After kernel was updated, perf cannot find the DSO and cannot show symbols in it anymore. You can see this if you have an old data file (w/ old kernel version): $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols ... The second message didn't show the build-id. With this patch: $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols ... Now it shows the build-id but still cannot load the symbol table. This is a different problem which will be fixed in the next patch. Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Andi Kleen Cc: David Ahern Cc: Peter Zijlstra Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org [ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 314a07151fb7..c40a4d8acf8b 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -1469,8 +1469,16 @@ static int __event_process_build_id(struct build_id_event *bev, dso__set_build_id(dso, &bev->build_id); - if (!is_kernel_module(filename, cpumode)) - dso->kernel = dso_type; + if (dso_type != DSO_TYPE_USER) { + struct kmod_path m = { .name = NULL, }; + + if (!kmod_path__parse_name(&m, filename) && m.kmod) + dso__set_short_name(dso, strdup(m.name), true); + else + dso->kernel = dso_type; + + free(m.name); + } build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id); From 6b335e8f545591c07df0f34231bd7ff7506c98c1 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Wed, 31 May 2017 21:01:04 +0900 Subject: [PATCH 0445/1065] perf symbols: Set module info when build-id event found Like machine__findnew_module_dso(), it should set necessary info for kernel modules to find symbol info from the file. Factor out dso__set_module_info() to do it. This is needed for dso__needs_decompress() to detect such DSOs. Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Andi Kleen Cc: David Ahern Cc: Peter Zijlstra Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170531120105.21731-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/dso.c | 15 +++++++++++++++ tools/perf/util/dso.h | 3 +++ tools/perf/util/header.c | 2 +- tools/perf/util/machine.c | 11 +---------- 4 files changed, 20 insertions(+), 11 deletions(-) diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c index a96a99d2369f..b27d127cdf68 100644 --- a/tools/perf/util/dso.c +++ b/tools/perf/util/dso.c @@ -335,6 +335,21 @@ int __kmod_path__parse(struct kmod_path *m, const char *path, return 0; } +void dso__set_module_info(struct dso *dso, struct kmod_path *m, + struct machine *machine) +{ + if (machine__is_host(machine)) + dso->symtab_type = DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE; + else + dso->symtab_type = DSO_BINARY_TYPE__GUEST_KMODULE; + + /* _KMODULE_COMP should be next to _KMODULE */ + if (m->kmod && m->comp) + dso->symtab_type++; + + dso__set_short_name(dso, strdup(m->name), true); +} + /* * Global list of open DSOs and the counter. */ diff --git a/tools/perf/util/dso.h b/tools/perf/util/dso.h index 12350b171727..5fe2ab5877bd 100644 --- a/tools/perf/util/dso.h +++ b/tools/perf/util/dso.h @@ -259,6 +259,9 @@ int __kmod_path__parse(struct kmod_path *m, const char *path, #define kmod_path__parse_name(__m, __p) __kmod_path__parse(__m, __p, true , false) #define kmod_path__parse_ext(__m, __p) __kmod_path__parse(__m, __p, false, true) +void dso__set_module_info(struct dso *dso, struct kmod_path *m, + struct machine *machine); + /* * The dso__data_* external interface provides following functions: * dso__data_get_fd diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index c40a4d8acf8b..5cac8d5e009a 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -1473,7 +1473,7 @@ static int __event_process_build_id(struct build_id_event *bev, struct kmod_path m = { .name = NULL, }; if (!kmod_path__parse_name(&m, filename) && m.kmod) - dso__set_short_name(dso, strdup(m.name), true); + dso__set_module_info(dso, &m, machine); else dso->kernel = dso_type; diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c index d97e014c3df3..d7f31cb0a4cb 100644 --- a/tools/perf/util/machine.c +++ b/tools/perf/util/machine.c @@ -572,16 +572,7 @@ static struct dso *machine__findnew_module_dso(struct machine *machine, if (dso == NULL) goto out_unlock; - if (machine__is_host(machine)) - dso->symtab_type = DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE; - else - dso->symtab_type = DSO_BINARY_TYPE__GUEST_KMODULE; - - /* _KMODULE_COMP should be next to _KMODULE */ - if (m->kmod && m->comp) - dso->symtab_type++; - - dso__set_short_name(dso, strdup(m->name), true); + dso__set_module_info(dso, m, machine); dso__set_long_name(dso, strdup(filename), true); } From a09935b878dc8efd4b030ed1ffa0553fc9011fb8 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Wed, 31 May 2017 21:01:05 +0900 Subject: [PATCH 0446/1065] perf symbols: Use correct filename for compressed modules in build-id cache The decompress_kmodule() decompresses kernel modules in order to load symbols from it. In the DSO_BINARY_TYPE__BUILD_ID_CACHE case, it needs the full file path to extract the file extension to determine the decompression method. But overwriting 'name' will fail the decompression since it might point to a non-existing old file. Instead, use dso->long_name for having the correct extension and use the real filename to decompress. In the DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP case, both names should be the same. This allows resolving symbols in the old modules. Before: $ perf report -i perf.data.old | grep scsi_mod 0.00% cc1 [scsi_mod] [k] 0x0000000000004aa6 0.00% as [scsi_mod] [k] 0x00000000000099e1 0.00% cc1 [scsi_mod] [k] 0x0000000000009830 0.00% cc1 [scsi_mod] [k] 0x0000000000001b8f After: 0.00% cc1 [scsi_mod] [k] scsi_handle_queue_ramp_up 0.00% as [scsi_mod] [k] scsi_sg_alloc 0.00% cc1 [scsi_mod] [k] scsi_setup_cmnd 0.00% cc1 [scsi_mod] [k] scsi_get_command Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Andi Kleen Cc: David Ahern Cc: Peter Zijlstra Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170531120105.21731-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol-elf.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index e7ee47f7377a..1fb2efae4f02 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -649,10 +649,7 @@ static int decompress_kmodule(struct dso *dso, const char *name, type != DSO_BINARY_TYPE__BUILD_ID_CACHE) return -1; - if (type == DSO_BINARY_TYPE__BUILD_ID_CACHE) - name = dso->long_name; - - if (kmod_path__parse_ext(&m, name) || !m.comp) + if (kmod_path__parse_ext(&m, dso->long_name) || !m.comp) return -1; fd = mkstemp(tmpbuf); From 598762cf91532e6e86dd21199b5e7f803df73f49 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Thu, 1 Jun 2017 22:54:50 +0200 Subject: [PATCH 0447/1065] perf test: Disable breakpoint signal tests for powerpc The following tests are failing on powerpc: # perf test break 18: Breakpoint overflow signal handler : FAILED! 19: Breakpoint overflow sampling : FAILED! The powerpc kenel so far does not have support to even create instruction breakpoints using the perf event interface, so those tests fail early in the config phase. I added a '->is_supported()' callback to test struct to be able to disable specific tests. It seems better than putting ifdefs directly to the test array. Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20170601205450.GA398@krava Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/bp_signal.c | 14 ++++++++++++++ tools/perf/tests/builtin-test.c | 7 +++++++ tools/perf/tests/tests.h | 3 +++ 3 files changed, 24 insertions(+) diff --git a/tools/perf/tests/bp_signal.c b/tools/perf/tests/bp_signal.c index e7664fe3bd33..8ba2c4618fe9 100644 --- a/tools/perf/tests/bp_signal.c +++ b/tools/perf/tests/bp_signal.c @@ -288,3 +288,17 @@ int test__bp_signal(int subtest __maybe_unused) return count1 == 1 && overflows == 3 && count2 == 3 && overflows_2 == 3 && count3 == 2 ? TEST_OK : TEST_FAIL; } + +bool test__bp_signal_is_supported(void) +{ +/* + * The powerpc so far does not have support to even create + * instruction breakpoint using the perf event interface. + * Once it's there we can release this. + */ +#ifdef __powerpc__ + return false; +#else + return true; +#endif +} diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c index 9e08d297f1a9..3ccfd58a8c3c 100644 --- a/tools/perf/tests/builtin-test.c +++ b/tools/perf/tests/builtin-test.c @@ -97,10 +97,12 @@ static struct test generic_tests[] = { { .desc = "Breakpoint overflow signal handler", .func = test__bp_signal, + .is_supported = test__bp_signal_is_supported, }, { .desc = "Breakpoint overflow sampling", .func = test__bp_signal_overflow, + .is_supported = test__bp_signal_is_supported, }, { .desc = "Number of exit events of a simple workload", @@ -401,6 +403,11 @@ static int __cmd_test(int argc, const char *argv[], struct intlist *skiplist) if (!perf_test__matches(t, curr, argc, argv)) continue; + if (t->is_supported && !t->is_supported()) { + pr_debug("%2d: %-*s: Disabled\n", i, width, t->desc); + continue; + } + pr_info("%2d: %-*s:", i, width, t->desc); if (intlist__find(skiplist, i)) { diff --git a/tools/perf/tests/tests.h b/tools/perf/tests/tests.h index 631859629403..577363809c9b 100644 --- a/tools/perf/tests/tests.h +++ b/tools/perf/tests/tests.h @@ -34,6 +34,7 @@ struct test { int (*get_nr)(void); const char *(*get_desc)(int subtest); } subtest; + bool (*is_supported)(void); }; /* Tests */ @@ -99,6 +100,8 @@ const char *test__clang_subtest_get_desc(int subtest); int test__clang_subtest_get_nr(void); int test__unit_number__scnprint(int subtest); +bool test__bp_signal_is_supported(void); + #if defined(__arm__) || defined(__aarch64__) #ifdef HAVE_DWARF_UNWIND_SUPPORT struct thread; From 6db47fdec7562b02703e346c10f7f4efdda6af5a Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 29 May 2017 14:27:54 -0500 Subject: [PATCH 0448/1065] perf annotate: Add missing powerpc triplet On an Ubuntu xenial system, 'perf annotate' says to install powerpc objdump on a system that already has binutils-powerpc-linux-gnu installed. Make perf aware of the missing triplet for the powerpc-linux-gnu target. Signed-off-by: Kim Phillips Cc: Alexander Shishkin Cc: He Kuang Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Ravi Bangoria Link: http://lkml.kernel.org/r/20170529142754.7fbfb1152fd8f2663de0ea70@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/arch/common.c b/tools/perf/arch/common.c index 837067f48a4c..6b40e9f01740 100644 --- a/tools/perf/arch/common.c +++ b/tools/perf/arch/common.c @@ -26,6 +26,7 @@ const char *const arm64_triplets[] = { const char *const powerpc_triplets[] = { "powerpc-unknown-linux-gnu-", + "powerpc-linux-gnu-", "powerpc64-unknown-linux-gnu-", "powerpc64-linux-gnu-", "powerpc64le-linux-gnu-", From 5ea0416f51cc93436bbe497c62ab49fd9cb245b6 Mon Sep 17 00:00:00 2001 From: Milian Wolff Date: Thu, 1 Jun 2017 23:00:21 +0200 Subject: [PATCH 0449/1065] perf report: Include partial stacks unwound with libdw So far the whole stack was thrown away when any error occurred before the maximum stack depth was unwound. This is actually a very common scenario though. The stacks that got unwound so far are still interesting. This removes a large chunk of differences when comparing perf script output for libunwind and libdw perf unwinding. E.g. with libunwind: ~~~~~ heaptrack_gui 2228 135073.388524: 479408 cycles: ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms]) ffffffff81181662 perf_event_mmap ([kernel.kallsyms]) ffffffff811cf5ed mmap_region ([kernel.kallsyms]) ffffffff811cfe6b do_mmap ([kernel.kallsyms]) ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms]) ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms]) ffffffff81033acb sys_mmap ([kernel.kallsyms]) ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms]) 192ca mmap64 (/usr/lib/ld-2.25.so) 59a9 _dl_map_object_from_fd (/usr/lib/ld-2.25.so) 83d0 _dl_map_object (/usr/lib/ld-2.25.so) cda1 openaux (/usr/lib/ld-2.25.so) 1834f _dl_catch_error (/usr/lib/ld-2.25.so) cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so) 3481 dl_main (/usr/lib/ld-2.25.so) 17387 _dl_sysdep_start (/usr/lib/ld-2.25.so) 4d37 _dl_start (/usr/lib/ld-2.25.so) d87 _start (/usr/lib/ld-2.25.so) heaptrack_gui 2228 135073.388677: 611329 cycles: 1a3e0 strcmp (/usr/lib/ld-2.25.so) 82b2 _dl_map_object (/usr/lib/ld-2.25.so) cda1 openaux (/usr/lib/ld-2.25.so) 1834f _dl_catch_error (/usr/lib/ld-2.25.so) cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so) 3481 dl_main (/usr/lib/ld-2.25.so) 17387 _dl_sysdep_start (/usr/lib/ld-2.25.so) 4d37 _dl_start (/usr/lib/ld-2.25.so) d87 _start (/usr/lib/ld-2.25.so) ~~~~~ With libdw without this patch: ~~~~~ heaptrack_gui 2228 135073.388524: 479408 cycles: ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms]) ffffffff81181662 perf_event_mmap ([kernel.kallsyms]) ffffffff811cf5ed mmap_region ([kernel.kallsyms]) ffffffff811cfe6b do_mmap ([kernel.kallsyms]) ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms]) ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms]) ffffffff81033acb sys_mmap ([kernel.kallsyms]) ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms]) heaptrack_gui 2228 135073.388677: 611329 cycles: ~~~~~ With this patch applied, the libdw unwinder will produce the same output as the libunwind unwinder. Signed-off-by: Milian Wolff Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20170601210021.20046-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/unwind-libdw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/unwind-libdw.c b/tools/perf/util/unwind-libdw.c index 943a06291587..b4c20124d2ee 100644 --- a/tools/perf/util/unwind-libdw.c +++ b/tools/perf/util/unwind-libdw.c @@ -224,7 +224,7 @@ int unwind__get_entries(unwind_entry_cb_t cb, void *arg, err = dwfl_getthread_frames(ui->dwfl, thread->tid, frame_callback, ui); - if (err && !ui->max_stack) + if (err && ui->max_stack != max_stack) err = 0; /* From 2538b9e2450ae255337c04356e9e0f8cb9ec48d9 Mon Sep 17 00:00:00 2001 From: Milian Wolff Date: Fri, 2 Jun 2017 16:37:52 +0200 Subject: [PATCH 0450/1065] perf report: Ensure the perf DSO mapping matches what libdw sees In some situations the libdw unwinder stopped working properly. I.e. with libunwind we see: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) 608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) f199 call_init.part.0 (/usr/lib/ld-2.25.so) f2a5 _dl_init (/usr/lib/ld-2.25.so) db9 _dl_start_user (/usr/lib/ld-2.25.so) ~~~~~ But with libdw and without this patch this sample is not properly unwound: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) ~~~~~ Debug output showed me that libdw found a module for the last frame address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch double-checks what libdw sees and what perf knows. If the mappings mismatch, we now report the elf known to perf. This fixes the situation above, and the libdw unwinder produces the same stack as libunwind. Signed-off-by: Milian Wolff Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20170602143753.16907-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/unwind-libdw.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/perf/util/unwind-libdw.c b/tools/perf/util/unwind-libdw.c index b4c20124d2ee..da45c4be5fb3 100644 --- a/tools/perf/util/unwind-libdw.c +++ b/tools/perf/util/unwind-libdw.c @@ -39,6 +39,14 @@ static int __report_module(struct addr_location *al, u64 ip, return 0; mod = dwfl_addrmodule(ui->dwfl, ip); + if (mod) { + Dwarf_Addr s; + + dwfl_module_info(mod, NULL, &s, NULL, NULL, NULL, NULL, NULL); + if (s != al->map->start) + mod = 0; + } + if (!mod) mod = dwfl_report_elf(ui->dwfl, dso->short_name, dso->long_name, -1, al->map->start, From 1b4af13ff2cc6897557bb0b8d9e2fad4fa4d67aa Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 5 Jun 2017 11:28:57 -0700 Subject: [PATCH 0451/1065] sparc64: Add __multi3 for gcc 7.x and later. Reported-by: Waldemar Brodkorb Signed-off-by: David S. Miller --- arch/sparc/lib/Makefile | 1 + arch/sparc/lib/multi3.S | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) create mode 100644 arch/sparc/lib/multi3.S diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile index 69912d2f8b54..07c03e72d812 100644 --- a/arch/sparc/lib/Makefile +++ b/arch/sparc/lib/Makefile @@ -15,6 +15,7 @@ lib-$(CONFIG_SPARC32) += copy_user.o locks.o lib-$(CONFIG_SPARC64) += atomic_64.o lib-$(CONFIG_SPARC32) += lshrdi3.o ashldi3.o lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o +lib-$(CONFIG_SPARC64) += multi3.o lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.o diff --git a/arch/sparc/lib/multi3.S b/arch/sparc/lib/multi3.S new file mode 100644 index 000000000000..d6b6c97fe3c7 --- /dev/null +++ b/arch/sparc/lib/multi3.S @@ -0,0 +1,35 @@ +#include +#include + + .text + .align 4 +ENTRY(__multi3) /* %o0 = u, %o1 = v */ + mov %o1, %g1 + srl %o3, 0, %g4 + mulx %g4, %g1, %o1 + srlx %g1, 0x20, %g3 + mulx %g3, %g4, %g5 + sllx %g5, 0x20, %o5 + srl %g1, 0, %g4 + sub %o1, %o5, %o5 + srlx %o5, 0x20, %o5 + addcc %g5, %o5, %g5 + srlx %o3, 0x20, %o5 + mulx %g4, %o5, %g4 + mulx %g3, %o5, %o5 + sethi %hi(0x80000000), %g3 + addcc %g5, %g4, %g5 + srlx %g5, 0x20, %g5 + add %g3, %g3, %g3 + movcc %xcc, %g0, %g3 + addcc %o5, %g5, %o5 + sllx %g4, 0x20, %g4 + add %o1, %g4, %o1 + add %o5, %g3, %g2 + mulx %g1, %o2, %g1 + add %g1, %g2, %g1 + mulx %o0, %o3, %o0 + retl + add %g1, %o0, %o0 +ENDPROC(__multi3) +EXPORT_SYMBOL(__multi3) From ea42d1cbe3f067fb714c3ec3e1792fa273b99561 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Mon, 6 Mar 2017 11:15:41 +0200 Subject: [PATCH 0452/1065] iwlwifi: mvm: rs: start using LQ command color Up until now, the driver was comparing the rate reported by the FW and the rate of the latest LQ command to avoid processing data belonging to the old LQ command. Recently, FW changed the meaning of the initial rate field in tx response and it holds the actual rate (which is not necessarily the initial rate of LQ's rate table). Use instead LQ cmd color to be able to filter out tx responses/BA notifications which where sent during earlier LQ commands' time frame. This fixes some throughput degradation in noisy environments. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho --- .../wireless/intel/iwlwifi/mvm/fw-api-rs.h | 5 ++ .../wireless/intel/iwlwifi/mvm/fw-api-tx.h | 3 ++ drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 46 +++++-------------- drivers/net/wireless/intel/iwlwifi/mvm/rs.h | 15 ++++++ drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 2 + drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 12 ++++- 6 files changed, 47 insertions(+), 36 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rs.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rs.h index 1b7d265ffb0a..a10c6aae9ab9 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rs.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rs.h @@ -307,6 +307,11 @@ enum { /* Bit 1-3: LQ command color. Used to match responses to LQ commands */ #define LQ_FLAG_COLOR_POS 1 #define LQ_FLAG_COLOR_MSK (7 << LQ_FLAG_COLOR_POS) +#define LQ_FLAG_COLOR_GET(_f) (((_f) & LQ_FLAG_COLOR_MSK) >>\ + LQ_FLAG_COLOR_POS) +#define LQ_FLAGS_COLOR_INC(_c) ((((_c) + 1) << LQ_FLAG_COLOR_POS) &\ + LQ_FLAG_COLOR_MSK) +#define LQ_FLAG_COLOR_SET(_f, _c) ((_c) | ((_f) & ~LQ_FLAG_COLOR_MSK)) /* Bit 4-5: Tx RTS BW Signalling * (0) No RTS BW signalling diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h index 81b98915b1a4..1360ebfdc51b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h @@ -519,8 +519,11 @@ struct agg_tx_status { * bit-7 invalid rate indication */ #define TX_RES_INIT_RATE_INDEX_MSK 0x0f +#define TX_RES_RATE_TABLE_COLOR_POS 4 #define TX_RES_RATE_TABLE_COLOR_MSK 0x70 #define TX_RES_INV_RATE_INDEX_MSK 0x80 +#define TX_RES_RATE_TABLE_COL_GET(_f) (((_f) & TX_RES_RATE_TABLE_COLOR_MSK) >>\ + TX_RES_RATE_TABLE_COLOR_POS) #define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f) #define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index 7788eefcd2bd..aa785cf3cf68 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -2,7 +2,7 @@ * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * Copyright(c) 2016 Intel Deutschland GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as @@ -1083,34 +1083,6 @@ static void rs_get_lower_rate_down_column(struct iwl_lq_sta *lq_sta, rs_get_lower_rate_in_column(lq_sta, rate); } -/* Check if both rates are identical - * allow_ant_mismatch enables matching a SISO rate on ANT_A or ANT_B - * with a rate indicating STBC/BFER and ANT_AB. - */ -static inline bool rs_rate_equal(struct rs_rate *a, - struct rs_rate *b, - bool allow_ant_mismatch) - -{ - bool ant_match = (a->ant == b->ant) && (a->stbc == b->stbc) && - (a->bfer == b->bfer); - - if (allow_ant_mismatch) { - if (a->stbc || a->bfer) { - WARN_ONCE(a->ant != ANT_AB, "stbc %d bfer %d ant %d", - a->stbc, a->bfer, a->ant); - ant_match |= (b->ant == ANT_A || b->ant == ANT_B); - } else if (b->stbc || b->bfer) { - WARN_ONCE(b->ant != ANT_AB, "stbc %d bfer %d ant %d", - b->stbc, b->bfer, b->ant); - ant_match |= (a->ant == ANT_A || a->ant == ANT_B); - } - } - - return (a->type == b->type) && (a->bw == b->bw) && (a->sgi == b->sgi) && - (a->ldpc == b->ldpc) && (a->index == b->index) && ant_match; -} - /* Check if both rates share the same column */ static inline bool rs_rate_column_match(struct rs_rate *a, struct rs_rate *b) @@ -1182,12 +1154,12 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, u32 lq_hwrate; struct rs_rate lq_rate, tx_resp_rate; struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; - u8 reduced_txp = (uintptr_t)info->status.status_driver_data[0]; + u32 tlc_info = (uintptr_t)info->status.status_driver_data[0]; + u8 reduced_txp = tlc_info & RS_DRV_DATA_TXP_MSK; + u8 lq_color = RS_DRV_DATA_LQ_COLOR_GET(tlc_info); u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1]; struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta; - bool allow_ant_mismatch = fw_has_api(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_API_LQ_SS_PARAMS); /* Treat uninitialized rate scaling data same as non-existing. */ if (!lq_sta) { @@ -1262,10 +1234,10 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate); /* Here we actually compare this rate to the latest LQ command */ - if (!rs_rate_equal(&tx_resp_rate, &lq_rate, allow_ant_mismatch)) { + if (lq_color != LQ_FLAG_COLOR_GET(table->flags)) { IWL_DEBUG_RATE(mvm, - "initial tx resp rate 0x%x does not match 0x%x\n", - tx_resp_hwrate, lq_hwrate); + "tx resp color 0x%x does not match 0x%x\n", + lq_color, LQ_FLAG_COLOR_GET(table->flags)); /* * Since rates mis-match, the last LQ command may have failed. @@ -3326,6 +3298,7 @@ static void rs_build_rates_table(struct iwl_mvm *mvm, u8 valid_tx_ant = 0; struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; bool toggle_ant = false; + u32 color; memcpy(&rate, initial_rate, sizeof(rate)); @@ -3380,6 +3353,9 @@ static void rs_build_rates_table(struct iwl_mvm *mvm, num_rates, num_retries, valid_tx_ant, toggle_ant); + /* update the color of the LQ command (as a counter at bits 1-3) */ + color = LQ_FLAGS_COLOR_INC(LQ_FLAG_COLOR_GET(lq_cmd->flags)); + lq_cmd->flags = LQ_FLAG_COLOR_SET(lq_cmd->flags, color); } struct rs_bfer_active_iter_data { diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h index ee207f2c0a90..3abde1cb0303 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h @@ -2,6 +2,7 @@ * * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2015 Intel Mobile Communications GmbH + * Copyright(c) 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as @@ -357,6 +358,20 @@ struct iwl_lq_sta { } pers; }; +/* ieee80211_tx_info's status_driver_data[0] is packed with lq color and txp + * Note, it's iwlmvm <-> mac80211 interface. + * bits 0-7: reduced tx power + * bits 8-10: LQ command's color + */ +#define RS_DRV_DATA_TXP_MSK 0xff +#define RS_DRV_DATA_LQ_COLOR_POS 8 +#define RS_DRV_DATA_LQ_COLOR_MSK (7 << RS_DRV_DATA_LQ_COLOR_POS) +#define RS_DRV_DATA_LQ_COLOR_GET(_f) (((_f) & RS_DRV_DATA_LQ_COLOR_MSK) >>\ + RS_DRV_DATA_LQ_COLOR_POS) +#define RS_DRV_DATA_PACK(_c, _p) ((void *)(uintptr_t)\ + (((uintptr_t)_p) |\ + ((_c) << RS_DRV_DATA_LQ_COLOR_POS))) + /* Initialize station's rate scaling information after adding station */ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, enum nl80211_band band, bool init); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 2716cb5483bf..ad62b67dceb2 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -313,6 +313,7 @@ enum iwl_mvm_agg_state { * This is basically (last acked packet++). * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the * Tx response (TX_CMD), and the block ack notification (COMPRESSED_BA). + * @lq_color: the color of the LQ command as it appears in tx response. * @amsdu_in_ampdu_allowed: true if A-MSDU in A-MPDU is allowed. * @state: state of the BA agreement establishment / tear down. * @txq_id: Tx queue used by the BA session / DQA @@ -331,6 +332,7 @@ struct iwl_mvm_tid_data { u16 next_reclaimed; /* The rest is Tx AGG related */ u32 rate_n_flags; + u8 lq_color; bool amsdu_in_ampdu_allowed; enum iwl_mvm_agg_state state; u16 txq_id; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index bcaceb64a6e8..f21901cd4a4f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -1323,6 +1323,7 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta; struct sk_buff_head skbs; u8 skb_freed = 0; + u8 lq_color; u16 next_reclaimed, seq_ctl; bool is_ndp = false; @@ -1405,8 +1406,9 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, info->status.tx_time = le16_to_cpu(tx_resp->wireless_media_time); BUILD_BUG_ON(ARRAY_SIZE(info->status.status_driver_data) < 1); + lq_color = TX_RES_RATE_TABLE_COL_GET(tx_resp->tlc_info); info->status.status_driver_data[0] = - (void *)(uintptr_t)tx_resp->reduced_tpc; + RS_DRV_DATA_PACK(lq_color, tx_resp->reduced_tpc); ieee80211_tx_status(mvm->hw, skb); } @@ -1638,6 +1640,9 @@ static void iwl_mvm_rx_tx_cmd_agg(struct iwl_mvm *mvm, le32_to_cpu(tx_resp->initial_rate); mvmsta->tid_data[tid].tx_time = le16_to_cpu(tx_resp->wireless_media_time); + mvmsta->tid_data[tid].lq_color = + (tx_resp->tlc_info & TX_RES_RATE_TABLE_COLOR_MSK) >> + TX_RES_RATE_TABLE_COLOR_POS; } rcu_read_unlock(); @@ -1707,6 +1712,11 @@ static void iwl_mvm_tx_reclaim(struct iwl_mvm *mvm, int sta_id, int tid, iwl_mvm_check_ratid_empty(mvm, sta, tid); freed = 0; + + /* pack lq color from tid_data along the reduced txp */ + ba_info->status.status_driver_data[0] = + RS_DRV_DATA_PACK(tid_data->lq_color, + ba_info->status.status_driver_data[0]); ba_info->status.status_driver_data[1] = (void *)(uintptr_t)rate; skb_queue_walk(&reclaimed_skbs, skb) { From c72c37b7f392ad7edc10b6092fa48c632ba6f4ed Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Thu, 16 Mar 2017 17:26:03 +0200 Subject: [PATCH 0453/1065] iwlwifi: mvm: Fix command queue number on d0i3 flow During d0i3 flow we flush all the queue except from the command queue. Currently, in this flow the command queue is hard coded to 9. In DQA the command queue number has changed from 9 to 0. Fix that. This fixes a problem in runtime PM resume flow. Fixes: 097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode") Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 4e74a6b90e70..ed20c0c5abc8 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1730,8 +1730,11 @@ int iwl_mvm_find_free_queue(struct iwl_mvm *mvm, u8 sta_id, u8 minq, u8 maxq); */ static inline u32 iwl_mvm_flushable_queues(struct iwl_mvm *mvm) { + u32 cmd_queue = iwl_mvm_is_dqa_supported(mvm) ? IWL_MVM_DQA_CMD_QUEUE : + IWL_MVM_CMD_QUEUE; + return ((BIT(mvm->cfg->base_params->num_of_queues) - 1) & - ~BIT(IWL_MVM_CMD_QUEUE)); + ~BIT(cmd_queue)); } static inline From ee48b72211f844a58a06819e9ccceee6acf04b2d Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Tue, 21 Mar 2017 17:13:16 +0200 Subject: [PATCH 0454/1065] iwlwifi: mvm: support ibss in dqa mode Allow working IBSS also when working in DQA mode. This is done by setting it to treat the queues the same as a BSS AP treats the queues. Fixes: 7948b87308a4 ("iwlwifi: mvm: enable dynamic queue allocation mode") Signed-off-by: Liad Kaufman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index f5c786ddc526..9184ce09b89a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -2120,7 +2120,8 @@ int iwl_mvm_add_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) if (!iwl_mvm_is_dqa_supported(mvm)) return 0; - if (WARN_ON(vif->type != NL80211_IFTYPE_AP)) + if (WARN_ON(vif->type != NL80211_IFTYPE_AP && + vif->type != NL80211_IFTYPE_ADHOC)) return -ENOTSUPP; /* @@ -2155,6 +2156,16 @@ int iwl_mvm_add_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) mvmvif->cab_queue = queue; } else if (!fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_STA_TYPE)) { + /* + * In IBSS, ieee80211_check_queues() sets the cab_queue to be + * invalid, so make sure we use the queue we want. + * Note that this is done here as we want to avoid making DQA + * changes in mac80211 layer. + */ + if (vif->type == NL80211_IFTYPE_ADHOC) { + vif->cab_queue = IWL_MVM_DQA_GCAST_QUEUE; + mvmvif->cab_queue = vif->cab_queue; + } iwl_mvm_enable_txq(mvm, vif->cab_queue, vif->cab_queue, 0, &cfg, timeout); } From d9954405758a0cbbe258d9b4d4dc12a06fa48a28 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 22 Mar 2017 22:00:10 +0100 Subject: [PATCH 0455/1065] iwlwifi: tt: move ucode_loaded check under mutex The ucode_loaded check should be under the mutex, since it can otherwise change state after we looked at it and before we got the mutex. Fix that. Fixes: 5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c index f9cbd197246f..506d58104e1c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c @@ -790,11 +790,13 @@ static int iwl_mvm_tcool_set_cur_state(struct thermal_cooling_device *cdev, struct iwl_mvm *mvm = (struct iwl_mvm *)(cdev->devdata); int ret; - if (!mvm->ucode_loaded || !(mvm->cur_ucode == IWL_UCODE_REGULAR)) - return -EIO; - mutex_lock(&mvm->mutex); + if (!mvm->ucode_loaded || !(mvm->cur_ucode == IWL_UCODE_REGULAR)) { + ret = -EIO; + goto unlock; + } + if (new_state >= ARRAY_SIZE(iwl_mvm_cdev_budgets)) { ret = -EINVAL; goto unlock; From addce854f164a68da9cb158e2e7e447705068549 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 29 Mar 2017 10:21:09 +0300 Subject: [PATCH 0456/1065] iwlwifi: mvm: fix firmware debug restart recording When we want to stop the recording of the firmware debug and restart it later without reloading the firmware we don't need to resend the configuration that comes with host commands. Sending those commands confused the hardware and led to an NMI 0x66. Change the flow as following: * read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL) * clear those registers * wait for the hardware to complete its write to the buffer * get the data * restore the value of those registers (to restart the recording) For early start (where the configuration is already compiled in the firmware), we don't need to set those registers after the firmware has been loaded, but only when we want to restart the recording without having restarted the firmware. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 1 + .../net/wireless/intel/iwlwifi/mvm/fw-dbg.c | 12 +------ drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 34 ++++++++++++++----- 4 files changed, 28 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h index 306bc967742e..77efbb78e867 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h @@ -370,6 +370,7 @@ #define MON_DMARB_RD_DATA_ADDR (0xa03c5c) #define DBGC_IN_SAMPLE (0xa03c00) +#define DBGC_OUT_CTRL (0xa03c0c) /* enable the ID buf for read */ #define WFPM_PS_CTL_CLR 0xA0300C diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c index 7b86a4f1b574..c8712e6eea74 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c @@ -1002,14 +1002,6 @@ int iwl_mvm_fw_dbg_collect_trig(struct iwl_mvm *mvm, return 0; } -static inline void iwl_mvm_restart_early_start(struct iwl_mvm *mvm) -{ - if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) - iwl_clear_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); - else - iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 1); -} - int iwl_mvm_start_fw_dbg_conf(struct iwl_mvm *mvm, u8 conf_id) { u8 *ptr; @@ -1023,10 +1015,8 @@ int iwl_mvm_start_fw_dbg_conf(struct iwl_mvm *mvm, u8 conf_id) /* EARLY START - firmware's configuration is hard coded */ if ((!mvm->fw->dbg_conf_tlv[conf_id] || !mvm->fw->dbg_conf_tlv[conf_id]->num_of_hcmds) && - conf_id == FW_DBG_START_FROM_ALIVE) { - iwl_mvm_restart_early_start(mvm); + conf_id == FW_DBG_START_FROM_ALIVE) return 0; - } if (!mvm->fw->dbg_conf_tlv[conf_id]) return -EINVAL; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index ed20c0c5abc8..52f8d7a6a7dc 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1756,6 +1756,7 @@ static inline void iwl_mvm_stop_device(struct iwl_mvm *mvm) if (!iwl_mvm_has_new_tx_api(mvm)) iwl_free_fw_paging(mvm); mvm->ucode_loaded = false; + mvm->fw_dbg_conf = FW_DBG_INVALID; iwl_trans_stop_device(mvm->trans); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 9ffff6ed8133..3da5ec40aaea 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -1149,22 +1149,38 @@ static void iwl_mvm_fw_error_dump_wk(struct work_struct *work) mutex_lock(&mvm->mutex); - /* stop recording */ if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + /* stop recording */ iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); + + iwl_mvm_fw_error_dump(mvm); + + /* start recording again if the firmware is not crashed */ + if (!test_bit(STATUS_FW_ERROR, &mvm->trans->status) && + mvm->fw->dbg_dest_tlv) + iwl_clear_bits_prph(mvm->trans, + MON_BUFF_SAMPLE_CTL, 0x100); } else { + u32 in_sample = iwl_read_prph(mvm->trans, DBGC_IN_SAMPLE); + u32 out_ctrl = iwl_read_prph(mvm->trans, DBGC_OUT_CTRL); + + /* stop recording */ iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); - /* wait before we collect the data till the DBGC stop */ udelay(100); + iwl_write_prph(mvm->trans, DBGC_OUT_CTRL, 0); + /* wait before we collect the data till the DBGC stop */ + udelay(500); + + iwl_mvm_fw_error_dump(mvm); + + /* start recording again if the firmware is not crashed */ + if (!test_bit(STATUS_FW_ERROR, &mvm->trans->status) && + mvm->fw->dbg_dest_tlv) { + iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, in_sample); + iwl_write_prph(mvm->trans, DBGC_OUT_CTRL, out_ctrl); + } } - iwl_mvm_fw_error_dump(mvm); - - /* start recording again if the firmware is not crashed */ - WARN_ON_ONCE((!test_bit(STATUS_FW_ERROR, &mvm->trans->status)) && - mvm->fw->dbg_dest_tlv && - iwl_mvm_start_fw_dbg_conf(mvm, mvm->fw_dbg_conf)); - mutex_unlock(&mvm->mutex); iwl_mvm_unref(mvm, IWL_MVM_REF_FW_DBG_COLLECT); From e4c49c4937951de1cdbe35572ade40c948dec1e1 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Fri, 24 Mar 2017 11:01:45 +0200 Subject: [PATCH 0457/1065] iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3 We only need to handle d0i3 entry and exit during suspend resume if system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry failures will cause suspend to fail. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791 Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index 70acf850a9f1..93cbc7a69bcd 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -2803,7 +2803,8 @@ static struct iwl_trans_dump_data #ifdef CONFIG_PM_SLEEP static int iwl_trans_pcie_suspend(struct iwl_trans *trans) { - if (trans->runtime_pm_mode == IWL_PLAT_PM_MODE_D0I3) + if (trans->runtime_pm_mode == IWL_PLAT_PM_MODE_D0I3 && + (trans->system_pm_mode == IWL_PLAT_PM_MODE_D0I3)) return iwl_pci_fw_enter_d0i3(trans); return 0; @@ -2811,7 +2812,8 @@ static int iwl_trans_pcie_suspend(struct iwl_trans *trans) static void iwl_trans_pcie_resume(struct iwl_trans *trans) { - if (trans->runtime_pm_mode == IWL_PLAT_PM_MODE_D0I3) + if (trans->runtime_pm_mode == IWL_PLAT_PM_MODE_D0I3 && + (trans->system_pm_mode == IWL_PLAT_PM_MODE_D0I3)) iwl_pci_fw_exit_d0i3(trans); } #endif /* CONFIG_PM_SLEEP */ From 71793b7d3eb0897ca0dc4a109ede608d3e2c70ed Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Thu, 30 Mar 2017 12:04:47 +0300 Subject: [PATCH 0458/1065] iwlwifi: mvm: don't fail when removing a key from an inexisting sta The iwl_mvm_remove_sta_key() function handles removing a key when the sta doesn't exist anymore. Mistakenly, this was changed to return an error while fixing another bug. If the mvm_sta doesn't exist, we continue normally, but just don't try to remove the igtk key. Fixes: cd4d23c1ea9b ("iwlwifi: mvm: Fix removal of IGTK") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 9184ce09b89a..614d67810d05 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -3332,18 +3332,15 @@ int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm, /* Get the station from the mvm local station table */ mvm_sta = iwl_mvm_get_key_sta(mvm, vif, sta); - if (!mvm_sta) { - IWL_ERR(mvm, "Failed to find station\n"); - return -EINVAL; - } - sta_id = mvm_sta->sta_id; + if (mvm_sta) + sta_id = mvm_sta->sta_id; IWL_DEBUG_WEP(mvm, "mvm remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id); - if (keyconf->cipher == WLAN_CIPHER_SUITE_AES_CMAC || - keyconf->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_128 || - keyconf->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_256) + if (mvm_sta && (keyconf->cipher == WLAN_CIPHER_SUITE_AES_CMAC || + keyconf->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_128 || + keyconf->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_256)) return iwl_mvm_send_sta_igtk(mvm, keyconf, sta_id, true); if (!__test_and_clear_bit(keyconf->hw_key_idx, mvm->fw_key_table)) { From 40cbeca3c09965f3084d591476559cbb3df150ec Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 31 Mar 2017 10:47:35 +0200 Subject: [PATCH 0459/1065] iwlwifi: mvm: clear new beacon command template struct Clear the struct so that all reserved fields are zero when we send the struct down to the device. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c index 0f1831b41915..fd2fc46e2fe5 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c @@ -1040,7 +1040,7 @@ static int iwl_mvm_mac_ctxt_send_beacon(struct iwl_mvm *mvm, struct iwl_mac_beacon_cmd_v6 beacon_cmd_v6; struct iwl_mac_beacon_cmd_v7 beacon_cmd; } u = {}; - struct iwl_mac_beacon_cmd beacon_cmd; + struct iwl_mac_beacon_cmd beacon_cmd = {}; struct ieee80211_tx_info *info; u32 beacon_skb_len; u32 rate, tx_flags; From 15098803d38778070b8edfa5a3d5fc4fef10d0a1 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Tue, 25 Apr 2017 10:18:10 +0300 Subject: [PATCH 0460/1065] iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265 In a previous commit, we removed support for API versions earlier than 22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were set to 17. Fix that. Fixes: 4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-7000.c | 4 ++-- drivers/net/wireless/intel/iwlwifi/iwl-8000.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-7000.c b/drivers/net/wireless/intel/iwlwifi/iwl-7000.c index 3b3e076571d6..45e2efc70d19 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-7000.c @@ -79,8 +79,8 @@ /* Lowest firmware API version supported */ #define IWL7260_UCODE_API_MIN 17 #define IWL7265_UCODE_API_MIN 17 -#define IWL7265D_UCODE_API_MIN 17 -#define IWL3168_UCODE_API_MIN 20 +#define IWL7265D_UCODE_API_MIN 22 +#define IWL3168_UCODE_API_MIN 22 /* NVM versions */ #define IWL7260_NVM_VERSION 0x0a1d diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c index b9718c0cf174..89137717c1fc 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c @@ -74,8 +74,8 @@ #define IWL8265_UCODE_API_MAX 30 /* Lowest firmware API version supported */ -#define IWL8000_UCODE_API_MIN 17 -#define IWL8265_UCODE_API_MIN 20 +#define IWL8000_UCODE_API_MIN 22 +#define IWL8265_UCODE_API_MIN 22 /* NVM versions */ #define IWL8000_NVM_VERSION 0x0a1d From dc1cd1d5ac22dbcd158c3de62b76ebb80e55d46b Mon Sep 17 00:00:00 2001 From: Shahar S Matityahu Date: Thu, 6 Apr 2017 13:35:38 +0300 Subject: [PATCH 0461/1065] iwlwifi: fix host command memory leaks Sending host command with CMD_WANT_SKB flag demands the release of the response buffer with iwl_free_resp function. The patch adds the memory release in all the relevant places Signed-off-by: Shahar S Matityahu Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c index 9fb46a6f47cf..9c9bfbbabdf1 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c @@ -906,7 +906,7 @@ int iwl_trans_pcie_dyn_txq_alloc(struct iwl_trans *trans, if (WARN_ON(iwl_rx_packet_payload_len(hcmd.resp_pkt) != sizeof(*rsp))) { ret = -EINVAL; - goto error; + goto error_free_resp; } rsp = (void *)hcmd.resp_pkt->data; @@ -915,13 +915,13 @@ int iwl_trans_pcie_dyn_txq_alloc(struct iwl_trans *trans, if (qid > ARRAY_SIZE(trans_pcie->txq)) { WARN_ONCE(1, "queue index %d unsupported", qid); ret = -EIO; - goto error; + goto error_free_resp; } if (test_and_set_bit(qid, trans_pcie->queue_used)) { WARN_ONCE(1, "queue %d already used", qid); ret = -EIO; - goto error; + goto error_free_resp; } txq->id = qid; @@ -934,8 +934,11 @@ int iwl_trans_pcie_dyn_txq_alloc(struct iwl_trans *trans, (txq->write_ptr) | (qid << 16)); IWL_DEBUG_TX_QUEUES(trans, "Activate queue %d\n", qid); + iwl_free_resp(&hcmd); return qid; +error_free_resp: + iwl_free_resp(&hcmd); error: iwl_pcie_gen2_txq_free_memory(trans, txq); return ret; From 6bf28969f617f0131e94deb5476f4c45f43fd847 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 5 Jun 2017 11:25:07 -0700 Subject: [PATCH 0462/1065] xtensa: reduce double exception literal reservation Double exception vector only needs 20 bytes of space for 5 literals, not 48. Reduce the reservation for double exception vector literals accordingly. This fixes build for configurations with small user exception vector size. Signed-off-by: Max Filippov --- arch/xtensa/kernel/vmlinux.lds.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 30d9fc21e076..162c77e53ca8 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -118,7 +118,7 @@ SECTIONS SECTION_VECTOR (.KernelExceptionVector.text, KERNEL_VECTOR_VADDR) SECTION_VECTOR (.UserExceptionVector.literal, USER_VECTOR_VADDR - 4) SECTION_VECTOR (.UserExceptionVector.text, USER_VECTOR_VADDR) - SECTION_VECTOR (.DoubleExceptionVector.literal, DOUBLEEXC_VECTOR_VADDR - 48) + SECTION_VECTOR (.DoubleExceptionVector.literal, DOUBLEEXC_VECTOR_VADDR - 20) SECTION_VECTOR (.DoubleExceptionVector.text, DOUBLEEXC_VECTOR_VADDR) #endif @@ -306,13 +306,13 @@ SECTIONS .UserExceptionVector.literal) SECTION_VECTOR (_DoubleExceptionVector_literal, .DoubleExceptionVector.literal, - DOUBLEEXC_VECTOR_VADDR - 48, + DOUBLEEXC_VECTOR_VADDR - 20, SIZEOF(.UserExceptionVector.text), .UserExceptionVector.text) SECTION_VECTOR (_DoubleExceptionVector_text, .DoubleExceptionVector.text, DOUBLEEXC_VECTOR_VADDR, - 48, + 20, .DoubleExceptionVector.literal) . = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3; From 186f0a0d8e083505bd5cd23baa82b2205224d9ad Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 5 Jun 2017 23:33:39 +0200 Subject: [PATCH 0463/1065] Revert "ACPICA: Disassembler: Enhance resource descriptor detection" Revert commit da28e1955d7f (ACPICA: Disassembler: Enhance resource descriptor detection) as it is based on an assumption that doesn't hold all the time and causes problems to happen because of that. Reported-by: Linda Knippers Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/utresrc.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index e0587c85bafd..ff096d9755b9 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -474,15 +474,6 @@ acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state, return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } - /* - * The end_tag opcode must be followed by a zero byte. - * Although this byte is technically defined to be a checksum, - * in practice, all ASL compilers set this byte to zero. - */ - if (*(aml + 1) != 0) { - return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); - } - /* Return the pointer to the end_tag if requested */ if (!user_function) { From a415c0f10627913793709ddb75add09d2ea334dc Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 5 Jun 2017 16:05:13 +1000 Subject: [PATCH 0464/1065] md: initialise ->writes_pending in personality modules. The new per-cpu counter for writes_pending is initialised in md_alloc(), which is not called by dm-raid. So dm-raid fails when md_write_start() is called. Move the initialization to the personality modules that need it. This way it is always initialised when needed, but isn't unnecessarily initialized (requiring memory allocation) when the personality doesn't use writes_pending. Reported-by: Heinz Mauelshagen Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending") Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/md.c | 16 ++++++++++++---- drivers/md/md.h | 1 + drivers/md/raid1.c | 2 ++ drivers/md/raid10.c | 3 +++ drivers/md/raid5.c | 3 +++ 5 files changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 212a6777ff31..87edc342ccb3 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5174,6 +5174,18 @@ static void mddev_delayed_delete(struct work_struct *ws) static void no_op(struct percpu_ref *r) {} +int mddev_init_writes_pending(struct mddev *mddev) +{ + if (mddev->writes_pending.percpu_count_ptr) + return 0; + if (percpu_ref_init(&mddev->writes_pending, no_op, 0, GFP_KERNEL) < 0) + return -ENOMEM; + /* We want to start with the refcount at zero */ + percpu_ref_put(&mddev->writes_pending); + return 0; +} +EXPORT_SYMBOL_GPL(mddev_init_writes_pending); + static int md_alloc(dev_t dev, char *name) { /* @@ -5239,10 +5251,6 @@ static int md_alloc(dev_t dev, char *name) blk_queue_make_request(mddev->queue, md_make_request); blk_set_stacking_limits(&mddev->queue->limits); - if (percpu_ref_init(&mddev->writes_pending, no_op, 0, GFP_KERNEL) < 0) - goto abort; - /* We want to start with the refcount at zero */ - percpu_ref_put(&mddev->writes_pending); disk = alloc_disk(1 << shift); if (!disk) { blk_cleanup_queue(mddev->queue); diff --git a/drivers/md/md.h b/drivers/md/md.h index 11f15146ce51..0fa1de42c42b 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -648,6 +648,7 @@ extern void md_unregister_thread(struct md_thread **threadp); extern void md_wakeup_thread(struct md_thread *thread); extern void md_check_recovery(struct mddev *mddev); extern void md_reap_sync_thread(struct mddev *mddev); +extern int mddev_init_writes_pending(struct mddev *mddev); extern void md_write_start(struct mddev *mddev, struct bio *bi); extern void md_write_inc(struct mddev *mddev, struct bio *bi); extern void md_write_end(struct mddev *mddev); diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index af5056d56878..e1a7e3d4c5e4 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -3063,6 +3063,8 @@ static int raid1_run(struct mddev *mddev) mdname(mddev)); return -EIO; } + if (mddev_init_writes_pending(mddev) < 0) + return -ENOMEM; /* * copy the already verified devices into our private RAID1 * bookkeeping area. [whatever we allocate in run(), diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 4343d7ff9916..797ed60abd5e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3611,6 +3611,9 @@ static int raid10_run(struct mddev *mddev) int first = 1; bool discard_supported = false; + if (mddev_init_writes_pending(mddev) < 0) + return -ENOMEM; + if (mddev->private == NULL) { conf = setup_conf(mddev); if (IS_ERR(conf)) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 722064689e82..ec0f951ae19f 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -7118,6 +7118,9 @@ static int raid5_run(struct mddev *mddev) long long min_offset_diff = 0; int first = 1; + if (mddev_init_writes_pending(mddev) < 0) + return -ENOMEM; + if (mddev->recovery_cp != MaxSector) pr_notice("md/raid:%s: not clean -- starting background reconstruction\n", mdname(mddev)); From cbf52a3e6a8a92beec6e0c70abf4111cd8f8faf7 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Mon, 5 Jun 2017 13:59:15 +0200 Subject: [PATCH 0465/1065] tags: honor COMPILED_SOURCE with apart output directory When the kernel is compiled with an "O=" argument, the object files are not in the source tree, but in the build tree. This patch fixes O= build by looking for object files in the build tree. Fixes: 923e02ecf3f8 ("scripts/tags.sh: Support compiled source") Signed-off-by: Robert Jarzmik Signed-off-by: Masahiro Yamada --- scripts/tags.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/scripts/tags.sh b/scripts/tags.sh index d661f2f3ef61..d23dcbf17457 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -106,6 +106,7 @@ all_compiled_sources() case "$i" in *.[cS]) j=${i/\.[cS]/\.o} + j="${j#$tree}" if [ -e $j ]; then echo $i fi From e5c86679d5e864947a52fb31e45a425dea3e7fa9 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 5 Jun 2017 02:43:51 -0700 Subject: [PATCH 0466/1065] xtensa: don't use linux IRQ #0 Linux IRQ #0 is reserved for error reporting and may not be used. Increase NR_IRQS for one additional slot and increase irq_domain_add_legacy parameter first_irq value to 1, so that linux IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains. Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform data definitions. This fixes inability to use hardware IRQ #0 in configurations that don't use device tree and allows for non-identity mapping between linux IRQ # and hardware IRQ #. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov --- arch/xtensa/include/asm/irq.h | 3 ++- arch/xtensa/kernel/irq.c | 5 ----- .../platforms/xtfpga/include/platform/hardware.h | 6 ++++-- arch/xtensa/platforms/xtfpga/setup.c | 10 +++++----- drivers/irqchip/irq-xtensa-mx.c | 2 +- drivers/irqchip/irq-xtensa-pic.c | 2 +- 6 files changed, 13 insertions(+), 15 deletions(-) diff --git a/arch/xtensa/include/asm/irq.h b/arch/xtensa/include/asm/irq.h index f71f88ea7646..19707db966f1 100644 --- a/arch/xtensa/include/asm/irq.h +++ b/arch/xtensa/include/asm/irq.h @@ -29,7 +29,8 @@ static inline void variant_irq_disable(unsigned int irq) { } # define PLATFORM_NR_IRQS 0 #endif #define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS -#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS) +#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS + 1) +#define XTENSA_PIC_LINUX_IRQ(hwirq) ((hwirq) + 1) #if VARIANT_NR_IRQS == 0 static inline void variant_init_irq(void) { } diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index a265edd6ac37..99341028cc77 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -34,11 +34,6 @@ asmlinkage void do_IRQ(int hwirq, struct pt_regs *regs) { int irq = irq_find_mapping(NULL, hwirq); - if (hwirq >= NR_IRQS) { - printk(KERN_EMERG "%s: cannot handle IRQ %d\n", - __func__, hwirq); - } - #ifdef CONFIG_DEBUG_STACKOVERFLOW /* Debugging check for stack overflow: is there less than 1KB free? */ { diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h index dbeea2b440a1..1fda7e20dfcb 100644 --- a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h +++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h @@ -24,16 +24,18 @@ /* Interrupt configuration. */ -#define PLATFORM_NR_IRQS 10 +#define PLATFORM_NR_IRQS 0 /* Default assignment of LX60 devices to external interrupts. */ #ifdef CONFIG_XTENSA_MX #define DUART16552_INTNUM XCHAL_EXTINT3_NUM #define OETH_IRQ XCHAL_EXTINT4_NUM +#define C67X00_IRQ XCHAL_EXTINT8_NUM #else #define DUART16552_INTNUM XCHAL_EXTINT0_NUM #define OETH_IRQ XCHAL_EXTINT1_NUM +#define C67X00_IRQ XCHAL_EXTINT5_NUM #endif /* @@ -63,5 +65,5 @@ #define C67X00_PADDR (XCHAL_KIO_PADDR + 0x0D0D0000) #define C67X00_SIZE 0x10 -#define C67X00_IRQ 5 + #endif /* __XTENSA_XTAVNET_HARDWARE_H */ diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index 779be723eb2b..42285f35d313 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -175,8 +175,8 @@ static struct resource ethoc_res[] = { .flags = IORESOURCE_MEM, }, [2] = { /* IRQ number */ - .start = OETH_IRQ, - .end = OETH_IRQ, + .start = XTENSA_PIC_LINUX_IRQ(OETH_IRQ), + .end = XTENSA_PIC_LINUX_IRQ(OETH_IRQ), .flags = IORESOURCE_IRQ, }, }; @@ -213,8 +213,8 @@ static struct resource c67x00_res[] = { .flags = IORESOURCE_MEM, }, [1] = { /* IRQ number */ - .start = C67X00_IRQ, - .end = C67X00_IRQ, + .start = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ), + .end = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ), .flags = IORESOURCE_IRQ, }, }; @@ -247,7 +247,7 @@ static struct resource serial_resource = { static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = DUART16552_PADDR, - .irq = DUART16552_INTNUM, + .irq = XTENSA_PIC_LINUX_IRQ(DUART16552_INTNUM), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = XCHAL_HAVE_BE ? UPIO_MEM32BE : UPIO_MEM32, diff --git a/drivers/irqchip/irq-xtensa-mx.c b/drivers/irqchip/irq-xtensa-mx.c index bb3ac5fe5846..72a391e01011 100644 --- a/drivers/irqchip/irq-xtensa-mx.c +++ b/drivers/irqchip/irq-xtensa-mx.c @@ -142,7 +142,7 @@ static struct irq_chip xtensa_mx_irq_chip = { int __init xtensa_mx_init_legacy(struct device_node *interrupt_parent) { struct irq_domain *root_domain = - irq_domain_add_legacy(NULL, NR_IRQS, 0, 0, + irq_domain_add_legacy(NULL, NR_IRQS - 1, 1, 0, &xtensa_mx_irq_domain_ops, &xtensa_mx_irq_chip); irq_set_default_host(root_domain); diff --git a/drivers/irqchip/irq-xtensa-pic.c b/drivers/irqchip/irq-xtensa-pic.c index 472ae1770964..f728755fa292 100644 --- a/drivers/irqchip/irq-xtensa-pic.c +++ b/drivers/irqchip/irq-xtensa-pic.c @@ -89,7 +89,7 @@ static struct irq_chip xtensa_irq_chip = { int __init xtensa_pic_init_legacy(struct device_node *interrupt_parent) { struct irq_domain *root_domain = - irq_domain_add_legacy(NULL, NR_IRQS, 0, 0, + irq_domain_add_legacy(NULL, NR_IRQS - 1, 1, 0, &xtensa_irq_domain_ops, &xtensa_irq_chip); irq_set_default_host(root_domain); return 0; From 86276921a17ee3090749c9f38f57dcfb73733bd4 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 22 May 2017 14:12:37 -0500 Subject: [PATCH 0467/1065] drm/nouveau/kms/nv50: add null check before pointer dereference Add null check before dereferencing pointer asyc Addresses-Coverity-ID: 1397932 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index a7663249b3ba..06e564a9ccb2 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -2107,7 +2107,8 @@ nv50_head_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state) asyc->set.dither = true; } } else { - asyc->set.mask = ~0; + if (asyc) + asyc->set.mask = ~0; asyh->set.mask = ~0; } From 321f5c5f2c494f3c94cec2289c8add678657ba2d Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 2 Jun 2017 14:38:07 +1000 Subject: [PATCH 0468/1065] drm/nouveau: replace multiple open-coded runpm support checks with function Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 34 ++++++++++++--------------- drivers/gpu/drm/nouveau/nouveau_drv.h | 3 +-- drivers/gpu/drm/nouveau/nouveau_vga.c | 13 ++-------- 3 files changed, 18 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 36268e1802b5..210910712606 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -80,7 +80,7 @@ int nouveau_modeset = -1; module_param_named(modeset, nouveau_modeset, int, 0400); MODULE_PARM_DESC(runpm, "disable (0), force enable (1), optimus only default (-1)"); -int nouveau_runtime_pm = -1; +static int nouveau_runtime_pm = -1; module_param_named(runpm, nouveau_runtime_pm, int, 0400); static struct drm_driver driver_stub; @@ -726,6 +726,14 @@ nouveau_pmops_thaw(struct device *dev) return nouveau_do_resume(drm_dev, false); } +bool +nouveau_pmops_runtime() +{ + if (nouveau_runtime_pm == -1) + return nouveau_is_optimus() || nouveau_is_v1_dsm(); + return nouveau_runtime_pm == 1; +} + static int nouveau_pmops_runtime_suspend(struct device *dev) { @@ -733,14 +741,7 @@ nouveau_pmops_runtime_suspend(struct device *dev) struct drm_device *drm_dev = pci_get_drvdata(pdev); int ret; - if (nouveau_runtime_pm == 0) { - pm_runtime_forbid(dev); - return -EBUSY; - } - - /* are we optimus enabled? */ - if (nouveau_runtime_pm == -1 && !nouveau_is_optimus() && !nouveau_is_v1_dsm()) { - DRM_DEBUG_DRIVER("failing to power off - not optimus\n"); + if (!nouveau_pmops_runtime()) { pm_runtime_forbid(dev); return -EBUSY; } @@ -765,8 +766,10 @@ nouveau_pmops_runtime_resume(struct device *dev) struct nvif_device *device = &nouveau_drm(drm_dev)->client.device; int ret; - if (nouveau_runtime_pm == 0) - return -EINVAL; + if (!nouveau_pmops_runtime()) { + pm_runtime_forbid(dev); + return -EBUSY; + } pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); @@ -796,14 +799,7 @@ nouveau_pmops_runtime_idle(struct device *dev) struct nouveau_drm *drm = nouveau_drm(drm_dev); struct drm_crtc *crtc; - if (nouveau_runtime_pm == 0) { - pm_runtime_forbid(dev); - return -EBUSY; - } - - /* are we optimus enabled? */ - if (nouveau_runtime_pm == -1 && !nouveau_is_optimus() && !nouveau_is_v1_dsm()) { - DRM_DEBUG_DRIVER("failing to power off - not optimus\n"); + if (!nouveau_pmops_runtime()) { pm_runtime_forbid(dev); return -EBUSY; } diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index eadec2f49ad3..a11b6aaed325 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -108,8 +108,6 @@ nouveau_cli(struct drm_file *fpriv) #include #include -extern int nouveau_runtime_pm; - struct nouveau_drm { struct nouveau_cli client; struct drm_device *dev; @@ -195,6 +193,7 @@ nouveau_drm(struct drm_device *dev) int nouveau_pmops_suspend(struct device *); int nouveau_pmops_resume(struct device *); +bool nouveau_pmops_runtime(void); #include diff --git a/drivers/gpu/drm/nouveau/nouveau_vga.c b/drivers/gpu/drm/nouveau/nouveau_vga.c index a4aacbc0cec8..02fe0efb9e16 100644 --- a/drivers/gpu/drm/nouveau/nouveau_vga.c +++ b/drivers/gpu/drm/nouveau/nouveau_vga.c @@ -87,7 +87,7 @@ void nouveau_vga_init(struct nouveau_drm *drm) { struct drm_device *dev = drm->dev; - bool runtime = false; + bool runtime = nouveau_pmops_runtime(); /* only relevant for PCI devices */ if (!dev->pdev) @@ -99,10 +99,6 @@ nouveau_vga_init(struct nouveau_drm *drm) if (pci_is_thunderbolt_attached(dev->pdev)) return; - if (nouveau_runtime_pm == 1) - runtime = true; - if ((nouveau_runtime_pm == -1) && (nouveau_is_optimus() || nouveau_is_v1_dsm())) - runtime = true; vga_switcheroo_register_client(dev->pdev, &nouveau_switcheroo_ops, runtime); if (runtime && nouveau_is_v1_dsm() && !nouveau_is_optimus()) @@ -113,18 +109,13 @@ void nouveau_vga_fini(struct nouveau_drm *drm) { struct drm_device *dev = drm->dev; - bool runtime = false; + bool runtime = nouveau_pmops_runtime(); vga_client_register(dev->pdev, NULL, NULL, NULL); if (pci_is_thunderbolt_attached(dev->pdev)) return; - if (nouveau_runtime_pm == 1) - runtime = true; - if ((nouveau_runtime_pm == -1) && (nouveau_is_optimus() || nouveau_is_v1_dsm())) - runtime = true; - vga_switcheroo_unregister_client(dev->pdev); if (runtime && nouveau_is_v1_dsm() && !nouveau_is_optimus()) vga_switcheroo_fini_domain_pm_ops(drm->dev->dev); From 8fa4338acca96cbc231e4125229632e879476464 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 2 Jun 2017 14:49:45 +1000 Subject: [PATCH 0469/1065] drm/nouveau: enable autosuspend only when it'll actually be used This prevents a deadlock that somehow results from the suspend() -> forbid() -> resume() callchain. [ 125.266960] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 1 [ 370.120872] INFO: task kworker/4:1:77 blocked for more than 120 seconds. [ 370.120920] Tainted: G O 4.12.0-rc3 #20 [ 370.120947] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 370.120982] kworker/4:1 D13808 77 2 0x00000000 [ 370.120998] Workqueue: pm pm_runtime_work [ 370.121004] Call Trace: [ 370.121018] __schedule+0x2bf/0xb40 [ 370.121025] ? mark_held_locks+0x5f/0x90 [ 370.121038] schedule+0x3d/0x90 [ 370.121044] rpm_resume+0x107/0x870 [ 370.121052] ? finish_wait+0x90/0x90 [ 370.121065] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121070] pm_runtime_forbid+0x4c/0x60 [ 370.121129] nouveau_pmops_runtime_suspend+0xaf/0xc0 [nouveau] [ 370.121139] pci_pm_runtime_suspend+0x5f/0x170 [ 370.121147] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121152] __rpm_callback+0xb9/0x1e0 [ 370.121159] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121166] rpm_callback+0x24/0x80 [ 370.121171] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121176] rpm_suspend+0x138/0x6e0 [ 370.121192] pm_runtime_work+0x7b/0xc0 [ 370.121199] process_one_work+0x253/0x6a0 [ 370.121216] worker_thread+0x4d/0x3b0 [ 370.121229] kthread+0x133/0x150 [ 370.121234] ? process_one_work+0x6a0/0x6a0 [ 370.121238] ? kthread_create_on_node+0x70/0x70 [ 370.121246] ret_from_fork+0x2a/0x40 [ 370.121283] Showing all locks held in the system: [ 370.121291] 2 locks held by kworker/4:1/77: [ 370.121298] #0: ("pm"){.+.+.+}, at: [] process_one_work+0x1d0/0x6a0 [ 370.121315] #1: ((&dev->power.work)){+.+.+.}, at: [] process_one_work+0x1d0/0x6a0 [ 370.121330] 1 lock held by khungtaskd/81: [ 370.121333] #0: (tasklist_lock){.+.+..}, at: [] debug_show_all_locks+0x3d/0x1a0 [ 370.121355] 1 lock held by dmesg/1639: [ 370.121358] #0: (&user->lock){+.+.+.}, at: [] devkmsg_read+0x4d/0x360 [ 370.121377] ============================================= Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 210910712606..15a13d09d431 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -495,7 +495,7 @@ nouveau_drm_load(struct drm_device *dev, unsigned long flags) nouveau_fbcon_init(dev); nouveau_led_init(dev); - if (nouveau_runtime_pm != 0) { + if (nouveau_pmops_runtime()) { pm_runtime_use_autosuspend(dev->dev); pm_runtime_set_autosuspend_delay(dev->dev, 5000); pm_runtime_set_active(dev->dev); @@ -527,7 +527,7 @@ nouveau_drm_unload(struct drm_device *dev) { struct nouveau_drm *drm = nouveau_drm(dev); - if (nouveau_runtime_pm != 0) { + if (nouveau_pmops_runtime()) { pm_runtime_get_sync(dev->dev); pm_runtime_forbid(dev->dev); } From b4e382ca7586a63b6c1e5221ce0863ff867c2df6 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 5 Jun 2017 17:23:32 +1000 Subject: [PATCH 0470/1065] drm/nouveau/tmr: fully separate alarm execution/pending lists Reusing the list_head for both is a bad idea. Callback execution is done with the lock dropped so that alarms can be rescheduled from the callback, which means that with some unfortunate timing, lists can get corrupted. The execution list should not require its own locking, the single function that uses it can only be called from a single context. Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/include/nvkm/subdev/timer.h | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/timer/base.c | 7 ++++--- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/timer.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/timer.h index 6a567fe347b3..820a4805916f 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/timer.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/timer.h @@ -4,6 +4,7 @@ struct nvkm_alarm { struct list_head head; + struct list_head exec; u64 timestamp; void (*func)(struct nvkm_alarm *); }; diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/timer/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/timer/base.c index f2a86eae0a0d..2437f7d41ca2 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/timer/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/timer/base.c @@ -50,7 +50,8 @@ nvkm_timer_alarm_trigger(struct nvkm_timer *tmr) /* Move to completed list. We'll drop the lock before * executing the callback so it can reschedule itself. */ - list_move_tail(&alarm->head, &exec); + list_del_init(&alarm->head); + list_add(&alarm->exec, &exec); } /* Shut down interrupt if no more pending alarms. */ @@ -59,8 +60,8 @@ nvkm_timer_alarm_trigger(struct nvkm_timer *tmr) spin_unlock_irqrestore(&tmr->lock, flags); /* Execute completed callbacks. */ - list_for_each_entry_safe(alarm, atemp, &exec, head) { - list_del_init(&alarm->head); + list_for_each_entry_safe(alarm, atemp, &exec, exec) { + list_del(&alarm->exec); alarm->func(alarm); } } From d68356cc51e304ff9a389f006b6249d41f2c2319 Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Sun, 4 Jun 2017 22:17:02 +0200 Subject: [PATCH 0471/1065] KVM: arm/arm64: vgic-v3: Fix nr_pre_bits bitfield extraction We used to extract PRIbits from the ICH_VT_EL2 which was the upper field in the register word, so a mask wasn't necessary, but as we switched to looking at PREbits, which is bits 26 through 28 with the PRIbits field being potentially non-zero, we really need to mask off the field value, otherwise fun things may happen. Signed-off-by: Christoffer Dall Acked-by: Marc Zyngier --- virt/kvm/arm/hyp/vgic-v3-sr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/virt/kvm/arm/hyp/vgic-v3-sr.c b/virt/kvm/arm/hyp/vgic-v3-sr.c index 32c3295929b0..87940364570b 100644 --- a/virt/kvm/arm/hyp/vgic-v3-sr.c +++ b/virt/kvm/arm/hyp/vgic-v3-sr.c @@ -22,7 +22,7 @@ #include #define vtr_to_max_lr_idx(v) ((v) & 0xf) -#define vtr_to_nr_pre_bits(v) (((u32)(v) >> 26) + 1) +#define vtr_to_nr_pre_bits(v) ((((u32)(v) >> 26) & 7) + 1) static u64 __hyp_text __gic_v3_get_lr(unsigned int lr) { From 47c298f792992c6eda26fc4e4630c7ca54dcec47 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 3 May 2017 10:38:18 +0200 Subject: [PATCH 0472/1065] gpu: ipu-v3: pre: only use internal clock gating By setting the SFTRST bit, the PRE will be held in the lowest power state with clocks to the internal blocks gated. When external clock gating is used (from the external clock controller, or by setting the CLKGATE bit) the PRE will sporadically fail to start. Signed-off-by: Lucas Stach Fixes: d2a34232580a ("gpu: ipu-v3: add driver for Prefetch Resolve Engine") Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-pre.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/ipu-v3/ipu-pre.c b/drivers/gpu/ipu-v3/ipu-pre.c index c55563379e2e..c35f74c83065 100644 --- a/drivers/gpu/ipu-v3/ipu-pre.c +++ b/drivers/gpu/ipu-v3/ipu-pre.c @@ -131,8 +131,6 @@ int ipu_pre_get(struct ipu_pre *pre) if (pre->in_use) return -EBUSY; - clk_prepare_enable(pre->clk_axi); - /* first get the engine out of reset and remove clock gating */ writel(0, pre->regs + IPU_PRE_CTRL); @@ -149,12 +147,7 @@ int ipu_pre_get(struct ipu_pre *pre) void ipu_pre_put(struct ipu_pre *pre) { - u32 val; - - val = IPU_PRE_CTRL_SFTRST | IPU_PRE_CTRL_CLKGATE; - writel(val, pre->regs + IPU_PRE_CTRL); - - clk_disable_unprepare(pre->clk_axi); + writel(IPU_PRE_CTRL_SFTRST, pre->regs + IPU_PRE_CTRL); pre->in_use = false; } @@ -249,6 +242,8 @@ static int ipu_pre_probe(struct platform_device *pdev) if (!pre->buffer_virt) return -ENOMEM; + clk_prepare_enable(pre->clk_axi); + pre->dev = dev; platform_set_drvdata(pdev, pre); mutex_lock(&ipu_pre_list_mutex); @@ -268,6 +263,8 @@ static int ipu_pre_remove(struct platform_device *pdev) available_pres--; mutex_unlock(&ipu_pre_list_mutex); + clk_disable_unprepare(pre->clk_axi); + if (pre->buffer_virt) gen_pool_free(pre->iram, (unsigned long)pre->buffer_virt, IPU_PRE_MAX_WIDTH * IPU_PRE_NUM_SCANLINES * 4); From e36aecba54bf24387271f2d7b989cc686a389931 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Wed, 10 May 2017 16:17:13 +0300 Subject: [PATCH 0473/1065] drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failure Not having an endpoint bound in DT should not cause a failure here, there are fallbacks. So explicitly accept a missing endpoint. This behavior change was introduced by refactoring in drm_of parsing code and it should not require dts changes. In particular this fixes imx6qdl-sabreauto boards. Link: https://lists.freedesktop.org/archives/dri-devel/2017-May/141233.html Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Signed-off-by: Leonard Crestez Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 8fb801fab039..8b05ecb8fdef 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -673,7 +673,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) ret = drm_of_find_panel_or_bridge(child, imx_ldb->lvds_mux ? 4 : 2, 0, &channel->panel, &channel->bridge); - if (ret) + if (ret && ret != -ENODEV) return ret; /* panel ddc only if there is no bridge */ From b7dfee2433576f1f030cb84cdb04b70f36554992 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 3 Jun 2017 11:57:21 -0700 Subject: [PATCH 0474/1065] gpu: ipu-v3: Fix CSI selection for VDIC The description of the CSI_SEL bit in the i.MX6 reference manual is incorrect. It states "This bit defines which CSI is the input to the IC. This bit is effective only if IC_INPUT is bit cleared". From experiment it was found this is in fact not correct. The CSI_SEL bit selects which CSI is input to _both_ the VDIC _and_ the IC. If the IC_INPUT bit is set so that the IC is receiving from the VDIC, the IC ignores the CSI_SEL bit, but CSI_SEL still selects which CSI the VDIC receives from in that case. Signed-off-by: Marek Vasut Signed-off-by: Steve Longerbeam Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-common.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c index 16d556816b5f..2fb5f432a54c 100644 --- a/drivers/gpu/ipu-v3/ipu-common.c +++ b/drivers/gpu/ipu-v3/ipu-common.c @@ -725,15 +725,16 @@ void ipu_set_ic_src_mux(struct ipu_soc *ipu, int csi_id, bool vdi) spin_lock_irqsave(&ipu->lock, flags); val = ipu_cm_read(ipu, IPU_CONF); - if (vdi) { + if (vdi) val |= IPU_CONF_IC_INPUT; - } else { + else val &= ~IPU_CONF_IC_INPUT; - if (csi_id == 1) - val |= IPU_CONF_CSI_SEL; - else - val &= ~IPU_CONF_CSI_SEL; - } + + if (csi_id == 1) + val |= IPU_CONF_CSI_SEL; + else + val &= ~IPU_CONF_CSI_SEL; + ipu_cm_write(ipu, val, IPU_CONF); spin_unlock_irqrestore(&ipu->lock, flags); From 7f22ced4377628074e2ac25f41a88f98eb3b03f1 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Mon, 5 Jun 2017 11:40:59 -0300 Subject: [PATCH 0475/1065] powerpc/kernel: Initialize load_tm on task creation Currently tsk->thread.load_tm is not initialized in the task creation and can contain garbage on a new task. This is an undesired behaviour, since it affects the timing to enable and disable the transactional memory laziness (disabling and enabling the MSR TM bit, which affects TM reclaim and recheckpoint in the scheduling process). Fixes: 5d176f751ee3 ("powerpc: tm: Enable transactional memory (TM) lazily for userspace") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Breno Leitao Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/process.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index a9435397eab8..2ad725ef4368 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1687,6 +1687,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) current->thread.tm_tfhar = 0; current->thread.tm_texasr = 0; current->thread.tm_tfiar = 0; + current->thread.load_tm = 0; #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ } EXPORT_SYMBOL(start_thread); From b3aa20ba2ba8072b73bd799605b8c98927b7056c Mon Sep 17 00:00:00 2001 From: Vaibhav Jain Date: Fri, 2 Jun 2017 22:26:48 +0530 Subject: [PATCH 0476/1065] cxl: Avoid double free_irq() for psl,slice interrupts During an eeh call to cxl_remove can result in double free_irq of psl,slice interrupts. This can happen if perst_reloads_same_image == 1 and call to cxl_configure_adapter() fails during slot_reset callback. In such a case we see a kernel oops with following back-trace: Oops: Kernel access of bad area, sig: 11 [#1] Call Trace: free_irq+0x88/0xd0 (unreliable) cxl_unmap_irq+0x20/0x40 [cxl] cxl_native_release_psl_irq+0x78/0xd8 [cxl] pci_deconfigure_afu+0xac/0x110 [cxl] cxl_remove+0x104/0x210 [cxl] pci_device_remove+0x6c/0x110 device_release_driver_internal+0x204/0x2e0 pci_stop_bus_device+0xa0/0xd0 pci_stop_and_remove_bus_device+0x28/0x40 pci_hp_remove_devices+0xb0/0x150 pci_hp_remove_devices+0x68/0x150 eeh_handle_normal_event+0x140/0x580 eeh_handle_event+0x174/0x360 eeh_event_handler+0x1e8/0x1f0 This patch fixes the issue of double free_irq by checking that variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are not '0' before un-mapping and resetting these variables to '0' when they are un-mapped. Cc: stable@vger.kernel.org Signed-off-by: Vaibhav Jain Reviewed-by: Andrew Donnellan Acked-by: Frederic Barrat Signed-off-by: Michael Ellerman --- drivers/misc/cxl/native.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c index 871a2f09c718..8d6ea9712dbd 100644 --- a/drivers/misc/cxl/native.c +++ b/drivers/misc/cxl/native.c @@ -1302,13 +1302,16 @@ int cxl_native_register_psl_err_irq(struct cxl *adapter) void cxl_native_release_psl_err_irq(struct cxl *adapter) { - if (adapter->native->err_virq != irq_find_mapping(NULL, adapter->native->err_hwirq)) + if (adapter->native->err_virq == 0 || + adapter->native->err_virq != + irq_find_mapping(NULL, adapter->native->err_hwirq)) return; cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000); cxl_unmap_irq(adapter->native->err_virq, adapter); cxl_ops->release_one_irq(adapter, adapter->native->err_hwirq); kfree(adapter->irq_name); + adapter->native->err_virq = 0; } int cxl_native_register_serr_irq(struct cxl_afu *afu) @@ -1346,13 +1349,15 @@ int cxl_native_register_serr_irq(struct cxl_afu *afu) void cxl_native_release_serr_irq(struct cxl_afu *afu) { - if (afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq)) + if (afu->serr_virq == 0 || + afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq)) return; cxl_p1n_write(afu, CXL_PSL_SERR_An, 0x0000000000000000); cxl_unmap_irq(afu->serr_virq, afu); cxl_ops->release_one_irq(afu->adapter, afu->serr_hwirq); kfree(afu->err_irq_name); + afu->serr_virq = 0; } int cxl_native_register_psl_irq(struct cxl_afu *afu) @@ -1375,12 +1380,15 @@ int cxl_native_register_psl_irq(struct cxl_afu *afu) void cxl_native_release_psl_irq(struct cxl_afu *afu) { - if (afu->native->psl_virq != irq_find_mapping(NULL, afu->native->psl_hwirq)) + if (afu->native->psl_virq == 0 || + afu->native->psl_virq != + irq_find_mapping(NULL, afu->native->psl_hwirq)) return; cxl_unmap_irq(afu->native->psl_virq, afu); cxl_ops->release_one_irq(afu->adapter, afu->native->psl_hwirq); kfree(afu->psl_irq_name); + afu->native->psl_virq = 0; } static void recover_psl_err(struct cxl_afu *afu, u64 errstat) From 27fef9f8ecb0495d302deba210606a32e54db37a Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 6 Jun 2017 09:46:33 +0100 Subject: [PATCH 0477/1065] mfd: arizona: Fix typo using hard-coded register A hardcoded register is accidentally used instead of the register address passed into the function. Correct this and use the appropriate variable. This would cause minor issues on wm5102, but all other devices using this driver would have been unaffected. Fixes: commit ef84f885e037 ("mfd: arizona: Refactor arizona_poll_reg") Reported-by: Andrzej Hajda Signed-off-by: Charles Keepax Signed-off-by: Lee Jones --- drivers/mfd/arizona-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 75488e65cd96..8d46e3ad9529 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -245,8 +245,7 @@ static int arizona_poll_reg(struct arizona *arizona, int ret; ret = regmap_read_poll_timeout(arizona->regmap, - ARIZONA_INTERRUPT_RAW_STATUS_5, val, - ((val & mask) == target), + reg, val, ((val & mask) == target), ARIZONA_REG_POLL_DELAY_US, timeout_ms * 1000); if (ret) From 9e6c9c0f2ce67534fda1fdd305fb5da3defece3e Mon Sep 17 00:00:00 2001 From: "Mauro S. M. Rodrigues" Date: Fri, 12 May 2017 23:26:56 -0300 Subject: [PATCH 0478/1065] i40e: Fix state flags for bit set and clean operations of PF Commit 0da36b9774cc ("i40e: use DECLARE_BITMAP for state fields") introduced changes in the way i40e works with state flags converting them to bitmaps using kernel bitmap API. This change introduced a regression due to a mistaken substitution using __I40E_VSI_DOWN instead of __I40E_DOWN when testing state of a PF at i40e_reset_subtask() function. This caused a flood in the kernel log with the follow message: [49.013] i40e 0002:01:00.0: bad reset request 0x00000020 Commit d19cb64b9222 ("i40e: separate PF and VSI state flags") also introduced some misuse of the VSI and PF flags, so both could be considered as the offenders. This patch simply fixes the flags where it makes sense by changing __I40E_VSI_DOWN to __I40E_DOWN. Fixes: 0da36b9774cc ("i40e: use DECLARE_BITMAP for state fields") Fixes: d19cb64b9222 ("i40e: separate PF and VSI state flags") Reviewed-by: "Guilherme G. Piccoli" Signed-off-by: "Mauro S. M. Rodrigues" Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 36 ++++++++++----------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index d5c9c9e06ff5..150caf6ca2b4 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -295,7 +295,7 @@ struct i40e_vsi *i40e_find_vsi_from_id(struct i40e_pf *pf, u16 id) **/ void i40e_service_event_schedule(struct i40e_pf *pf) { - if (!test_bit(__I40E_VSI_DOWN, pf->state) && + if (!test_bit(__I40E_DOWN, pf->state) && !test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state)) queue_work(i40e_wq, &pf->service_task); } @@ -3611,7 +3611,7 @@ static irqreturn_t i40e_intr(int irq, void *data) * this is not a performance path and napi_schedule() * can deal with rescheduling. */ - if (!test_bit(__I40E_VSI_DOWN, pf->state)) + if (!test_bit(__I40E_DOWN, pf->state)) napi_schedule_irqoff(&q_vector->napi); } @@ -3687,7 +3687,7 @@ static irqreturn_t i40e_intr(int irq, void *data) enable_intr: /* re-enable interrupt causes */ wr32(hw, I40E_PFINT_ICR0_ENA, ena_mask); - if (!test_bit(__I40E_VSI_DOWN, pf->state)) { + if (!test_bit(__I40E_DOWN, pf->state)) { i40e_service_event_schedule(pf); i40e_irq_dynamic_enable_icr0(pf, false); } @@ -6203,7 +6203,7 @@ static void i40e_fdir_reinit_subtask(struct i40e_pf *pf) { /* if interface is down do nothing */ - if (test_bit(__I40E_VSI_DOWN, pf->state)) + if (test_bit(__I40E_DOWN, pf->state)) return; if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state)) @@ -6344,7 +6344,7 @@ static void i40e_watchdog_subtask(struct i40e_pf *pf) int i; /* if interface is down do nothing */ - if (test_bit(__I40E_VSI_DOWN, pf->state) || + if (test_bit(__I40E_DOWN, pf->state) || test_bit(__I40E_CONFIG_BUSY, pf->state)) return; @@ -6399,9 +6399,9 @@ static void i40e_reset_subtask(struct i40e_pf *pf) reset_flags |= BIT(__I40E_GLOBAL_RESET_REQUESTED); clear_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state); } - if (test_bit(__I40E_VSI_DOWN_REQUESTED, pf->state)) { - reset_flags |= BIT(__I40E_VSI_DOWN_REQUESTED); - clear_bit(__I40E_VSI_DOWN_REQUESTED, pf->state); + if (test_bit(__I40E_DOWN_REQUESTED, pf->state)) { + reset_flags |= BIT(__I40E_DOWN_REQUESTED); + clear_bit(__I40E_DOWN_REQUESTED, pf->state); } /* If there's a recovery already waiting, it takes @@ -6415,7 +6415,7 @@ static void i40e_reset_subtask(struct i40e_pf *pf) /* If we're already down or resetting, just bail */ if (reset_flags && - !test_bit(__I40E_VSI_DOWN, pf->state) && + !test_bit(__I40E_DOWN, pf->state) && !test_bit(__I40E_CONFIG_BUSY, pf->state)) { rtnl_lock(); i40e_do_reset(pf, reset_flags, true); @@ -7002,7 +7002,7 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) u32 val; int v; - if (test_bit(__I40E_VSI_DOWN, pf->state)) + if (test_bit(__I40E_DOWN, pf->state)) goto clear_recovery; dev_dbg(&pf->pdev->dev, "Rebuilding internal switch\n"); @@ -9767,7 +9767,7 @@ int i40e_vsi_release(struct i40e_vsi *vsi) return -ENODEV; } if (vsi == pf->vsi[pf->lan_vsi] && - !test_bit(__I40E_VSI_DOWN, pf->state)) { + !test_bit(__I40E_DOWN, pf->state)) { dev_info(&pf->pdev->dev, "Can't remove PF VSI\n"); return -ENODEV; } @@ -11003,7 +11003,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } pf->next_vsi = 0; pf->pdev = pdev; - set_bit(__I40E_VSI_DOWN, pf->state); + set_bit(__I40E_DOWN, pf->state); hw = &pf->hw; hw->back = pf; @@ -11293,7 +11293,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * before setting up the misc vector or we get a race and the vector * ends up disabled forever. */ - clear_bit(__I40E_VSI_DOWN, pf->state); + clear_bit(__I40E_DOWN, pf->state); /* In case of MSIX we are going to setup the misc vector right here * to handle admin queue events etc. In case of legacy and MSI @@ -11448,7 +11448,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* Unwind what we've done if something failed in the setup */ err_vsis: - set_bit(__I40E_VSI_DOWN, pf->state); + set_bit(__I40E_DOWN, pf->state); i40e_clear_interrupt_scheme(pf); kfree(pf->vsi); err_switch_setup: @@ -11500,7 +11500,7 @@ static void i40e_remove(struct pci_dev *pdev) /* no more scheduling of any task */ set_bit(__I40E_SUSPENDED, pf->state); - set_bit(__I40E_VSI_DOWN, pf->state); + set_bit(__I40E_DOWN, pf->state); if (pf->service_timer.data) del_timer_sync(&pf->service_timer); if (pf->service_task.func) @@ -11740,7 +11740,7 @@ static void i40e_shutdown(struct pci_dev *pdev) struct i40e_hw *hw = &pf->hw; set_bit(__I40E_SUSPENDED, pf->state); - set_bit(__I40E_VSI_DOWN, pf->state); + set_bit(__I40E_DOWN, pf->state); rtnl_lock(); i40e_prep_for_reset(pf, true); rtnl_unlock(); @@ -11789,7 +11789,7 @@ static int i40e_suspend(struct pci_dev *pdev, pm_message_t state) int retval = 0; set_bit(__I40E_SUSPENDED, pf->state); - set_bit(__I40E_VSI_DOWN, pf->state); + set_bit(__I40E_DOWN, pf->state); if (pf->wol_en && (pf->flags & I40E_FLAG_WOL_MC_MAGIC_PKT_WAKE)) i40e_enable_mc_magic_wake(pf); @@ -11841,7 +11841,7 @@ static int i40e_resume(struct pci_dev *pdev) /* handling the reset will rebuild the device state */ if (test_and_clear_bit(__I40E_SUSPENDED, pf->state)) { - clear_bit(__I40E_VSI_DOWN, pf->state); + clear_bit(__I40E_DOWN, pf->state); rtnl_lock(); i40e_reset_and_rebuild(pf, false, true); rtnl_unlock(); From 2aae918c7a21fb8388ab30b8abd4d9240e8ebd7f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B6rn=20T=C3=B6pel?= Date: Mon, 15 May 2017 06:52:00 +0200 Subject: [PATCH 0479/1065] i40e/i40evf: proper update of the page_offset field MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In f8b45b74cc62 ("i40e/i40evf: Use build_skb to build frames") i40e_build_skb updates the page_offset field with an incorrect offset, which can lead to data corruption. This patch updates page_offset correctly, by properly setting truesize. Note that the bug only appears on architectures where PAGE_SIZE is 8192 or larger. Fixes: f8b45b74cc62 ("i40e/i40evf: Use build_skb to build frames") Signed-off-by: Björn Töpel Acked-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 3 ++- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 29321a6167a6..cd894f4023b1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -1854,7 +1854,8 @@ static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring, #if (PAGE_SIZE < 8192) unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; #else - unsigned int truesize = SKB_DATA_ALIGN(size); + unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + + SKB_DATA_ALIGN(I40E_SKB_PAD + size); #endif struct sk_buff *skb; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index dfe241a12ad0..12b02e530503 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1190,7 +1190,8 @@ static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring, #if (PAGE_SIZE < 8192) unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; #else - unsigned int truesize = SKB_DATA_ALIGN(size); + unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + + SKB_DATA_ALIGN(I40E_SKB_PAD + size); #endif struct sk_buff *skb; From 4b0755e90ae03ba40174842af6fa810355960fbc Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 4 May 2017 12:20:17 -0300 Subject: [PATCH 0480/1065] [media] tc358743: fix register i2c_rd/wr function fix The below mentioned fix contains a small but severe bug, fix it to make the driver work again. Fixes: 3538aa6ecfb2 ("[media] tc358743: fix register i2c_rd/wr functions") Cc: Hans Verkuil Cc: Mauro Carvalho Chehab Signed-off-by: Philipp Zabel Acked-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/tc358743.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index acef4eca269f..3251cba89e8f 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -223,7 +223,7 @@ static void i2c_wr8(struct v4l2_subdev *sd, u16 reg, u8 val) static void i2c_wr8_and_or(struct v4l2_subdev *sd, u16 reg, u8 mask, u8 val) { - i2c_wrreg(sd, reg, (i2c_rdreg(sd, reg, 2) & mask) | val, 2); + i2c_wrreg(sd, reg, (i2c_rdreg(sd, reg, 1) & mask) | val, 1); } static u16 i2c_rd16(struct v4l2_subdev *sd, u16 reg) From e0f2e5eb14668dc798942ff5f4241d9bd17f9655 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 25 Apr 2017 00:12:46 -0300 Subject: [PATCH 0481/1065] [media] rainshadow-cec: Fix missing spin_lock_init() The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Fixes: 0f314f6c2e77 ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver") Signed-off-by: Wei Yongjun Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/rainshadow-cec/rainshadow-cec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c index 71bd68548c9c..4126552c9055 100644 --- a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c +++ b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c @@ -336,6 +336,7 @@ static int rain_connect(struct serio *serio, struct serio_driver *drv) serio_set_drvdata(serio, rain); INIT_WORK(&rain->work, rain_irq_work_handler); mutex_init(&rain->write_lock); + spin_lock_init(&rain->buf_lock); err = serio_open(serio, drv); if (err) From 5ebb6dd36c9f5fb37b1077b393c254d70a14cb46 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 28 Apr 2017 01:51:40 -0300 Subject: [PATCH 0482/1065] [media] vb2: Fix an off by one error in 'vb2_plane_vaddr' We should ensure that 'plane_no' is '< vb->num_planes' as done in 'vb2_plane_cookie' just a few lines below. Fixes: e23ccc0ad925 ("[media] v4l: add videobuf2 Video for Linux 2 driver framework") Cc: stable@vger.kernel.org Signed-off-by: Christophe JAILLET Reviewed-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/videobuf2-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 94afbbf92807..c0175ea7e7ad 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -868,7 +868,7 @@ EXPORT_SYMBOL_GPL(vb2_core_create_bufs); void *vb2_plane_vaddr(struct vb2_buffer *vb, unsigned int plane_no) { - if (plane_no > vb->num_planes || !vb->planes[plane_no].mem_priv) + if (plane_no >= vb->num_planes || !vb->planes[plane_no].mem_priv) return NULL; return call_ptr_memop(vb, vaddr, vb->planes[plane_no].mem_priv); From 2302e5591a4ad2d66107c75b6be170121bff5ccd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 21 Apr 2017 07:52:17 -0300 Subject: [PATCH 0483/1065] [media] cec: improve MEDIA_CEC_RC dependencies Changing the IS_REACHABLE() into a plain #ifdef broke the case of CONFIG_MEDIA_RC=m && CONFIG_MEDIA_CEC=y: drivers/media/cec/cec-core.o: In function `cec_unregister_adapter': cec-core.c:(.text.cec_unregister_adapter+0x18): undefined reference to `rc_unregister_device' drivers/media/cec/cec-core.o: In function `cec_delete_adapter': cec-core.c:(.text.cec_delete_adapter+0x54): undefined reference to `rc_free_device' drivers/media/cec/cec-core.o: In function `cec_register_adapter': cec-core.c:(.text.cec_register_adapter+0x94): undefined reference to `rc_register_device' cec-core.c:(.text.cec_register_adapter+0xa4): undefined reference to `rc_free_device' cec-core.c:(.text.cec_register_adapter+0x110): undefined reference to `rc_unregister_device' drivers/media/cec/cec-core.o: In function `cec_allocate_adapter': cec-core.c:(.text.cec_allocate_adapter+0x234): undefined reference to `rc_allocate_device' drivers/media/cec/cec-adap.o: In function `cec_received_msg': cec-adap.c:(.text.cec_received_msg+0x734): undefined reference to `rc_keydown' cec-adap.c:(.text.cec_received_msg+0x768): undefined reference to `rc_keyup' This adds an additional dependency to explicitly forbid this combination. Fixes: 5f2c467c54f5 ("[media] cec: add MEDIA_CEC_RC config option") Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/cec/Kconfig b/drivers/media/cec/Kconfig index 4e25a950ae6f..43428cec3a01 100644 --- a/drivers/media/cec/Kconfig +++ b/drivers/media/cec/Kconfig @@ -1,5 +1,6 @@ config MEDIA_CEC_RC bool "HDMI CEC RC integration" depends on CEC_CORE && RC_CORE + depends on CEC_CORE=m || RC_CORE=y ---help--- Pass on CEC remote control messages to the RC framework. From ae8eb443a17331a07579bc04817accaaaa62b78e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 12 May 2017 16:39:21 -0300 Subject: [PATCH 0484/1065] [media] cec-notifier.h: handle unreachable CONFIG_CEC_CORE Fix a link error in this specific combination of config options: CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_CEC_CORE=m CONFIG_MEDIA_CEC_NOTIFIER=y CONFIG_VIDEO_STI_HDMI_CEC=m CONFIG_DRM_STI=y drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_remove': sti_hdmi.c:(.text.sti_hdmi_remove+0x10): undefined reference to `cec_notifier_set_phys_addr' sti_hdmi.c:(.text.sti_hdmi_remove+0x34): undefined reference to `cec_notifier_put' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_get_modes': sti_hdmi.c:(.text.sti_hdmi_connector_get_modes+0x4a): undefined reference to `cec_notifier_set_phys_addr_from_edid' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_probe': sti_hdmi.c:(.text.sti_hdmi_probe+0x204): undefined reference to `cec_notifier_get' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_detect': sti_hdmi.c:(.text.sti_hdmi_connector_detect+0x36): undefined reference to `cec_notifier_set_phys_addr' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_disable': sti_hdmi.c:(.text.sti_hdmi_disable+0xc0): undefined reference to `cec_notifier_set_phys_addr' The version below seems to work, though I don't particularly like the IS_REACHABLE() addition since that can be confusing to users. Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/cec-notifier.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/include/media/cec-notifier.h b/include/media/cec-notifier.h index 413335c8cb52..298f996969df 100644 --- a/include/media/cec-notifier.h +++ b/include/media/cec-notifier.h @@ -106,6 +106,16 @@ static inline void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n, { } +static inline void cec_notifier_register(struct cec_notifier *n, + struct cec_adapter *adap, + void (*callback)(struct cec_adapter *adap, u16 pa)) +{ +} + +static inline void cec_notifier_unregister(struct cec_notifier *n) +{ +} + #endif #endif From f8c627fbabbe9ed6ae68dcfefb7519bd153a7ac0 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 16 May 2017 04:56:14 -0300 Subject: [PATCH 0485/1065] [media] sir_ir: infinite loop in interrupt handler Since this driver does no detection of hardware, it might be used with a non-sir port. Escape out if we are spinning. Reported-by: kbuild test robot Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/sir_ir.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/rc/sir_ir.c b/drivers/media/rc/sir_ir.c index e12ec50bf0bf..90a5f8fd5eea 100644 --- a/drivers/media/rc/sir_ir.c +++ b/drivers/media/rc/sir_ir.c @@ -183,9 +183,15 @@ static irqreturn_t sir_interrupt(int irq, void *dev_id) static unsigned long delt; unsigned long deltintr; unsigned long flags; + int counter = 0; int iir, lsr; while ((iir = inb(io + UART_IIR) & UART_IIR_ID)) { + if (++counter > 256) { + dev_err(&sir_ir_dev->dev, "Trapped in interrupt"); + break; + } + switch (iir & UART_IIR_ID) { /* FIXME toto treba preriedit */ case UART_IIR_MSI: (void)inb(io + UART_MSR); From 28e8af8a163ed6afe9498f1d499a5061c2214755 Mon Sep 17 00:00:00 2001 From: Chris Chiu Date: Mon, 5 Jun 2017 15:05:30 -0600 Subject: [PATCH 0486/1065] ALSA: hda/realtek: Fix mic and headset jack sense on Asus X705UD The ASUS X705UD laptop requires the known fixup ALC256_FIXUP_ASUS_MIC in order to fix headphone jack sensing and to enable use of the internal microphone. Unfortunately jack sensing for the headset mic is still not working. [rearranged the position to keep the PCI SSID order -- tiwai] Signed-off-by: Chris Chiu Signed-off-by: Daniel Drake Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a57988d617e9..8f9a41f4e2d2 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5862,6 +5862,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A), SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), + SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), From 4eab0ea196f569ed2085a0fa3729f60eb8edaad1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 6 Jun 2017 12:33:17 +0200 Subject: [PATCH 0487/1065] ALSA: hda/realtek - Reorder ALC269 ASUS quirk entries A disorder is found in some ALC269 quirk entries for ASUS (1043:xxxx), which should have been sorted in PCI SSID order. Rearrange them, so that I won't overlook the already existing entry like I did a couple of times in the past... Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8f9a41f4e2d2..cbeebc0a9711 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5854,7 +5854,11 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x10c0, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), + SND_PCI_QUIRK(0x1043, 0x10d0, "ASUS X540LA/X540LJ", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x115d, "Asus 1015E", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x1043, 0x11c0, "ASUS X556UR", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1043, 0x1290, "ASUS X441SA", ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1043, 0x12a0, "ASUS X441UV", ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x12f0, "ASUS X541UV", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x12e0, "ASUS X541SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC), @@ -5864,12 +5868,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), - SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), - SND_PCI_QUIRK(0x1043, 0x10d0, "ASUS X540LA/X540LJ", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), - SND_PCI_QUIRK(0x1043, 0x11c0, "ASUS X556UR", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), - SND_PCI_QUIRK(0x1043, 0x1290, "ASUS X441SA", ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE), - SND_PCI_QUIRK(0x1043, 0x12a0, "ASUS X441UV", ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), From ba4a648f12f4cd0a8003dd229b6ca8a53348ee4b Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 6 Jun 2017 20:23:57 +1000 Subject: [PATCH 0488/1065] powerpc/numa: Fix percpu allocations to be NUMA aware In commit 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"), we switched to the generic implementation of cpu_to_node(), which uses a percpu variable to hold the NUMA node for each CPU. Unfortunately we neglected to notice that we use cpu_to_node() in the allocation of our percpu areas, leading to a chicken and egg problem. In practice what happens is when we are setting up the percpu areas, cpu_to_node() reports that all CPUs are on node 0, so we allocate all percpu areas on node 0. This is visible in the dmesg output, as all pcpu allocs being in group 0: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31 pcpu-alloc: [0] 32 33 34 35 [0] 36 37 38 39 pcpu-alloc: [0] 40 41 42 43 [0] 44 45 46 47 To fix it we need an early_cpu_to_node() which can run prior to percpu being setup. We already have the numa_cpu_lookup_table we can use, so just plumb it in. With the patch dmesg output shows two groups, 0 and 1: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [1] 24 25 26 27 [1] 28 29 30 31 pcpu-alloc: [1] 32 33 34 35 [1] 36 37 38 39 pcpu-alloc: [1] 40 41 42 43 [1] 44 45 46 47 We can also check the data_offset in the paca of various CPUs, with the fix we see: CPU 0: data_offset = 0x0ffe8b0000 CPU 24: data_offset = 0x1ffe5b0000 And we can see from dmesg that CPU 24 has an allocation on node 1: node 0: [mem 0x0000000000000000-0x0000000fffffffff] node 1: [mem 0x0000001000000000-0x0000001fffffffff] Cc: stable@vger.kernel.org # v3.16+ Fixes: 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID") Signed-off-by: Michael Ellerman Reviewed-by: Nicholas Piggin Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/topology.h | 14 ++++++++++++++ arch/powerpc/kernel/setup_64.c | 4 ++-- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 8b3b46b7b0f2..329771559cbb 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -44,8 +44,22 @@ extern void __init dump_numa_cpu_topology(void); extern int sysfs_add_device_to_node(struct device *dev, int nid); extern void sysfs_remove_device_from_node(struct device *dev, int nid); +static inline int early_cpu_to_node(int cpu) +{ + int nid; + + nid = numa_cpu_lookup_table[cpu]; + + /* + * Fall back to node 0 if nid is unset (it should be, except bugs). + * This allows callers to safely do NODE_DATA(early_cpu_to_node(cpu)). + */ + return (nid < 0) ? 0 : nid; +} #else +static inline int early_cpu_to_node(int cpu) { return 0; } + static inline void dump_numa_cpu_topology(void) {} static inline int sysfs_add_device_to_node(struct device *dev, int nid) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index f35ff9dea4fb..a8c1f99e9607 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -661,7 +661,7 @@ void __init emergency_stack_init(void) static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align) { - return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align, + return __alloc_bootmem_node(NODE_DATA(early_cpu_to_node(cpu)), size, align, __pa(MAX_DMA_ADDRESS)); } @@ -672,7 +672,7 @@ static void __init pcpu_fc_free(void *ptr, size_t size) static int pcpu_cpu_distance(unsigned int from, unsigned int to) { - if (cpu_to_node(from) == cpu_to_node(to)) + if (early_cpu_to_node(from) == early_cpu_to_node(to)) return LOCAL_DISTANCE; else return REMOTE_DISTANCE; From 8c218578fcbbbdb10416c8614658bf32e3bf1655 Mon Sep 17 00:00:00 2001 From: Madhavan Srinivasan Date: Fri, 26 May 2017 13:38:27 +0530 Subject: [PATCH 0489/1065] powerpc/perf: Fix Power9 test_adder fields Commit 8d911904f3ce4 ('powerpc/perf: Add restrictions to PMC5 in power9 DD1') was added to restrict the use of PMC5 in Power9 DD1. Intention was to disable the use of PMC5 using raw event code. But instead of updating the power9_isa207_pmu structure (used on DD1), the commit incorrectly updated the power9_pmu structure. Fix it. Fixes: 8d911904f3ce ("powerpc/perf: Add restrictions to PMC5 in power9 DD1") Reported-by: Shriya Signed-off-by: Madhavan Srinivasan Tested-by: Shriya Signed-off-by: Michael Ellerman --- arch/powerpc/perf/power9-pmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/perf/power9-pmu.c b/arch/powerpc/perf/power9-pmu.c index 018f8e90ac35..bb28e1a41257 100644 --- a/arch/powerpc/perf/power9-pmu.c +++ b/arch/powerpc/perf/power9-pmu.c @@ -402,7 +402,7 @@ static struct power_pmu power9_isa207_pmu = { .name = "POWER9", .n_counter = MAX_PMU_COUNTERS, .add_fields = ISA207_ADD_FIELDS, - .test_adder = ISA207_TEST_ADDER, + .test_adder = P9_DD1_TEST_ADDER, .compute_mmcr = isa207_compute_mmcr, .config_bhrb = power9_config_bhrb, .bhrb_filter_map = power9_bhrb_filter_map, @@ -421,7 +421,7 @@ static struct power_pmu power9_pmu = { .name = "POWER9", .n_counter = MAX_PMU_COUNTERS, .add_fields = ISA207_ADD_FIELDS, - .test_adder = P9_DD1_TEST_ADDER, + .test_adder = ISA207_TEST_ADDER, .compute_mmcr = isa207_compute_mmcr, .config_bhrb = power9_config_bhrb, .bhrb_filter_map = power9_bhrb_filter_map, From 0e3e97526a850f97c9fe8b646937b3a2bef58290 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 6 Jun 2017 14:47:29 +0300 Subject: [PATCH 0490/1065] usb: gadget: composite: make sure to reactivate function on unbind If a function sets bind_deactivated flag, upon removal we will be left with an unbalanced deactivation. Let's make sure that we conditionally call usb_function_activate() from usb_remove_function() and make sure usb_remove_function() is called from remove_config(). Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 49d685ad0da9..45b554032332 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -315,6 +315,9 @@ void usb_remove_function(struct usb_configuration *c, struct usb_function *f) list_del(&f->list); if (f->unbind) f->unbind(c, f); + + if (f->bind_deactivated) + usb_function_activate(f); } EXPORT_SYMBOL_GPL(usb_remove_function); @@ -956,12 +959,8 @@ static void remove_config(struct usb_composite_dev *cdev, f = list_first_entry(&config->functions, struct usb_function, list); - list_del(&f->list); - if (f->unbind) { - DBG(cdev, "unbind function '%s'/%p\n", f->name, f); - f->unbind(config, f); - /* may free memory for "f" */ - } + + usb_remove_function(config, f); } list_del(&config->list); if (config->unbind) { From bbaf0e2b1c1b4f88abd6ef49576f0efb1734eae5 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 26 Apr 2017 16:56:26 +0200 Subject: [PATCH 0491/1065] kvm: async_pf: fix rcu_irq_enter() with irqs enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit native_safe_halt enables interrupts, and you just shouldn't call rcu_irq_enter() with interrupts enabled. Reorder the call with the following local_irq_disable() to respect the invariant. Reported-by: Ross Zwisler Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Acked-by: Paul E. McKenney Tested-by: Wanpeng Li Signed-off-by: Radim Krčmář --- arch/x86/kernel/kvm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index da5c09789984..43e10d6fdbed 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -161,8 +161,8 @@ void kvm_async_pf_task_wait(u32 token) */ rcu_irq_exit(); native_safe_halt(); - rcu_irq_enter(); local_irq_disable(); + rcu_irq_enter(); } } if (!n.halted) From 3db28271f0feae129262d30e41384a7c4c767987 Mon Sep 17 00:00:00 2001 From: Sebastian Parschauer Date: Tue, 6 Jun 2017 13:53:13 +0200 Subject: [PATCH 0492/1065] HID: Add quirk for Dell PIXART OEM mouse This mouse is also known under other IDs. It needs the quirk ALWAYS_POLL or will disconnect in runlevel 1 or 3. Signed-off-by: Sebastian Parschauer CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 8ca1e8ce0af2..4f9a3938189a 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -319,6 +319,9 @@ #define USB_VENDOR_ID_DELCOM 0x0fc5 #define USB_DEVICE_ID_DELCOM_VISUAL_IND 0xb080 +#define USB_VENDOR_ID_DELL 0x413c +#define USB_DEVICE_ID_DELL_PIXART_USB_OPTICAL_MOUSE 0x301a + #define USB_VENDOR_ID_DELORME 0x1163 #define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100 #define USB_DEVICE_ID_DELORME_EM_LT20 0x0200 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 6316498b7812..a88e7c7bea0a 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -85,6 +85,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_K65RGB_RAPIDFIRE, HID_QUIRK_NO_INIT_REPORTS | HID_QUIRK_ALWAYS_POLL }, { USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_SCIMITAR_PRO_RGB, HID_QUIRK_NO_INIT_REPORTS | HID_QUIRK_ALWAYS_POLL }, { USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVE_SB_OMNI_SURROUND_51, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_PIXART_USB_OPTICAL_MOUSE, HID_QUIRK_ALWAYS_POLL }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3, HID_QUIRK_MULTI_INPUT }, From d4912215d1031e4fb3d1038d2e1857218dba0d0a Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Mon, 5 Jun 2017 05:19:09 -0700 Subject: [PATCH 0493/1065] KVM: nVMX: Fix exception injection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit WARNING: CPU: 3 PID: 2840 at arch/x86/kvm/vmx.c:10966 nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] CPU: 3 PID: 2840 Comm: qemu-system-x86 Tainted: G OE 4.12.0-rc3+ #23 RIP: 0010:nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] Call Trace: ? kvm_check_async_pf_completion+0xef/0x120 [kvm] ? rcu_read_lock_sched_held+0x79/0x80 vmx_queue_exception+0x104/0x160 [kvm_intel] ? vmx_queue_exception+0x104/0x160 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x1171/0x1ce0 [kvm] ? kvm_arch_vcpu_load+0x47/0x240 [kvm] ? kvm_arch_vcpu_load+0x62/0x240 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x81/0x220 entry_SYSCALL64_slow_path+0x25/0x25 This is triggered occasionally by running both win7 and win2016 in L2, in addition, EPT is disabled on both L1 and L2. It can't be reproduced easily. Commit 0b6ac343fc (KVM: nVMX: Correct handling of exception injection) mentioned that "KVM wants to inject page-faults which it got to the guest. This function assumes it is called with the exit reason in vmcs02 being a #PF exception". Commit e011c663 (KVM: nVMX: Check all exceptions for intercept during delivery to L2) allows to check all exceptions for intercept during delivery to L2. However, there is no guarantee the exit reason is exception currently, when there is an external interrupt occurred on host, maybe a time interrupt for host which should not be injected to guest, and somewhere queues an exception, then the function nested_vmx_check_exception() will be called and the vmexit emulation codes will try to emulate the "Acknowledge interrupt on exit" behavior, the warning is triggered. Reusing the exit reason from the L2->L0 vmexit is wrong in this case, the reason must always be EXCEPTION_NMI when injecting an exception into L1 as a nested vmexit. Cc: Paolo Bonzini Cc: Radim Krčmář Signed-off-by: Wanpeng Li Fixes: e011c663b9c7 ("KVM: nVMX: Check all exceptions for intercept during delivery to L2") Signed-off-by: Radim Krčmář --- arch/x86/kvm/vmx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 9b4b5d6dcd34..ca5d2b93385c 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2425,7 +2425,7 @@ static int nested_vmx_check_exception(struct kvm_vcpu *vcpu, unsigned nr) if (!(vmcs12->exception_bitmap & (1u << nr))) return 0; - nested_vmx_vmexit(vcpu, to_vmx(vcpu)->exit_reason, + nested_vmx_vmexit(vcpu, EXIT_REASON_EXCEPTION_NMI, vmcs_read32(VM_EXIT_INTR_INFO), vmcs_readl(EXIT_QUALIFICATION)); return 1; From d6dbdd3c8558cad3b6d74cc357b408622d122331 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 5 Jun 2017 19:17:18 +0100 Subject: [PATCH 0494/1065] KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages Under memory pressure, we start ageing pages, which amounts to parsing the page tables. Since we don't want to allocate any extra level, we pass NULL for our private allocation cache. Which means that stage2_get_pud() is allowed to fail. This results in the following splat: [ 1520.409577] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 1520.417741] pgd = ffff810f52fef000 [ 1520.421201] [00000008] *pgd=0000010f636c5003, *pud=0000010f56f48003, *pmd=0000000000000000 [ 1520.429546] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 1520.435156] Modules linked in: [ 1520.438246] CPU: 15 PID: 53550 Comm: qemu-system-aar Tainted: G W 4.12.0-rc4-00027-g1885c397eaec #7205 [ 1520.448705] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB12A 10/26/2016 [ 1520.463726] task: ffff800ac5fb4e00 task.stack: ffff800ce04e0000 [ 1520.469666] PC is at stage2_get_pmd+0x34/0x110 [ 1520.474119] LR is at kvm_age_hva_handler+0x44/0xf0 [ 1520.478917] pc : [] lr : [] pstate: 40000145 [ 1520.486325] sp : ffff800ce04e33d0 [ 1520.489644] x29: ffff800ce04e33d0 x28: 0000000ffff40064 [ 1520.494967] x27: 0000ffff27e00000 x26: 0000000000000000 [ 1520.500289] x25: ffff81051ba65008 x24: 0000ffff40065000 [ 1520.505618] x23: 0000ffff40064000 x22: 0000000000000000 [ 1520.510947] x21: ffff810f52b20000 x20: 0000000000000000 [ 1520.516274] x19: 0000000058264000 x18: 0000000000000000 [ 1520.521603] x17: 0000ffffa6fe7438 x16: ffff000008278b70 [ 1520.526940] x15: 000028ccd8000000 x14: 0000000000000008 [ 1520.532264] x13: ffff7e0018298000 x12: 0000000000000002 [ 1520.537582] x11: ffff000009241b93 x10: 0000000000000940 [ 1520.542908] x9 : ffff0000092ef800 x8 : 0000000000000200 [ 1520.548229] x7 : ffff800ce04e36a8 x6 : 0000000000000000 [ 1520.553552] x5 : 0000000000000001 x4 : 0000000000000000 [ 1520.558873] x3 : 0000000000000000 x2 : 0000000000000008 [ 1520.571696] x1 : ffff000008fd5000 x0 : ffff0000080b149c [ 1520.577039] Process qemu-system-aar (pid: 53550, stack limit = 0xffff800ce04e0000) [...] [ 1521.510735] [] stage2_get_pmd+0x34/0x110 [ 1521.516221] [] kvm_age_hva_handler+0x44/0xf0 [ 1521.522054] [] handle_hva_to_gpa+0xb8/0xe8 [ 1521.527716] [] kvm_age_hva+0x44/0xf0 [ 1521.532854] [] kvm_mmu_notifier_clear_flush_young+0x70/0xc0 [ 1521.539992] [] __mmu_notifier_clear_flush_young+0x88/0xd0 [ 1521.546958] [] page_referenced_one+0xf0/0x188 [ 1521.552881] [] rmap_walk_anon+0xec/0x250 [ 1521.558370] [] rmap_walk+0x78/0xa0 [ 1521.563337] [] page_referenced+0x164/0x180 [ 1521.569002] [] shrink_active_list+0x178/0x3b8 [ 1521.574922] [] shrink_node_memcg+0x328/0x600 [ 1521.580758] [] shrink_node+0xc4/0x328 [ 1521.585986] [] do_try_to_free_pages+0xc0/0x340 [ 1521.592000] [] try_to_free_pages+0xcc/0x240 [...] The trivial fix is to handle this NULL pud value early, rather than dereferencing it blindly. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Reviewed-by: Christoffer Dall Signed-off-by: Christoffer Dall --- virt/kvm/arm/mmu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c index a2d63247d1bb..e2e5effba2a9 100644 --- a/virt/kvm/arm/mmu.c +++ b/virt/kvm/arm/mmu.c @@ -879,6 +879,9 @@ static pmd_t *stage2_get_pmd(struct kvm *kvm, struct kvm_mmu_memory_cache *cache pmd_t *pmd; pud = stage2_get_pud(kvm, cache, addr); + if (!pud) + return NULL; + if (stage2_pud_none(*pud)) { if (!cache) return NULL; From 26f4b1f7a8da3eaa6c32e12f87c9f5388196dc67 Mon Sep 17 00:00:00 2001 From: Gilad Ben-Yossef Date: Tue, 6 Jun 2017 11:00:45 +0300 Subject: [PATCH 0495/1065] staging: ccree: fix buffer copy Fix a bug where the copying of scatterlist buffers incorrectly ignored bytes to skip in a scatterlist and ended 1 byte short. This fixes testmgr hmac and hash test failures currently obscured by hash import/export not being supported. Fixes: abefd6741d ("staging: ccree: introduce CryptoCell HW driver"). Signed-off-by: Gilad Ben-Yossef Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ccree/ssi_buffer_mgr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/ccree/ssi_buffer_mgr.c b/drivers/staging/ccree/ssi_buffer_mgr.c index 038e2ff5e545..6471d3d2d375 100644 --- a/drivers/staging/ccree/ssi_buffer_mgr.c +++ b/drivers/staging/ccree/ssi_buffer_mgr.c @@ -216,7 +216,8 @@ void ssi_buffer_mgr_copy_scatterlist_portion( uint32_t nents, lbytes; nents = ssi_buffer_mgr_get_sgl_nents(sg, end, &lbytes, NULL); - sg_copy_buffer(sg, nents, (void *)dest, (end - to_skip), 0, (direct == SSI_SG_TO_BUF)); + sg_copy_buffer(sg, nents, (void *)dest, (end - to_skip + 1), to_skip, + (direct == SSI_SG_TO_BUF)); } static inline int ssi_buffer_mgr_render_buff_to_mlli( From b2cc3c8071bee6e3defa54b701671d310cb94f3c Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 23 May 2017 09:40:26 -0700 Subject: [PATCH 0496/1065] drm: kirin: Fix drm_of_find_panel_or_bridge conversion This fixes a regression introduced by ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") that was recently merged, causing HDMI output to not work. For the kirin driver, the port value should be 1 instead of 0, so this oneline patch fixes it and gets graphics working again. Cc: Rob Herring Cc: Archit Taneja Cc: Philipp Zabel Cc: Maxime Ripard Cc: Sean Paul Cc: Dave Airlie Cc: Xinliang Liu Fix-suggested-by: Rob Herring Signed-off-by: John Stultz Reviewed-by: Xinliang Liu Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/1495557626-25285-1-git-send-email-john.stultz@linaro.org --- drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c index 5abc69c9630f..f77dcfaade6c 100644 --- a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c +++ b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c @@ -760,7 +760,7 @@ static int dsi_parse_dt(struct platform_device *pdev, struct dw_dsi *dsi) * Get the endpoint node. In our case, dsi has one output port1 * to which the external HDMI bridge is connected. */ - ret = drm_of_find_panel_or_bridge(np, 0, 0, NULL, &dsi->bridge); + ret = drm_of_find_panel_or_bridge(np, 1, 0, NULL, &dsi->bridge); if (ret) return ret; From 9ba26a7283f56100eb08a2df48f17da600f60d52 Mon Sep 17 00:00:00 2001 From: Cao jin Date: Tue, 6 Jun 2017 17:07:53 +0800 Subject: [PATCH 0497/1065] Kbuild: tiny correction on `make help` The help info of `make C=1` is little confusing, make it clear. Signed-off-by: Cao jin Signed-off-by: Masahiro Yamada --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 63e10bd4f14a..1e2ae78f8ba5 100644 --- a/Makefile +++ b/Makefile @@ -1437,7 +1437,7 @@ help: @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' @echo ' make V=2 [targets] 2 => give reason for rebuild of target' @echo ' make O=dir [targets] Locate all output files in "dir", including .config' - @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' + @echo ' make C=1 [targets] Check re-compiled c source with $$CHECK (sparse by default)' @echo ' make C=2 [targets] Force check of all c source with $$CHECK' @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' From f4eb17e1efe538d4da7d574bedb00a8dafcc26b7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 6 Jun 2017 11:34:06 -0400 Subject: [PATCH 0498/1065] Revert "sit: reload iphdr in ipip6_rcv" This reverts commit b699d0035836f6712917a41e7ae58d84359b8ff9. As per Eric Dumazet, the pskb_may_pull() is a NOP in this particular case, so the 'iph' reload is unnecessary. Signed-off-by: David S. Miller --- net/ipv6/sit.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index af832e7ce80f..61e5902f0687 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -657,7 +657,6 @@ static int ipip6_rcv(struct sk_buff *skb) if (iptunnel_pull_header(skb, 0, htons(ETH_P_IPV6), !net_eq(tunnel->net, dev_net(tunnel->dev)))) goto out; - iph = ip_hdr(skb); err = IP_ECN_decapsulate(iph, skb); if (unlikely(err)) { From dad7a3be4960e5545882a0cd8d7613af22874314 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 6 Jun 2017 23:21:59 +0800 Subject: [PATCH 0499/1065] blk-mq: pass correct hctx to blk_mq_try_issue_directly When direct issue is done on request picked up from plug list, the hctx need to be updated with the actual hw queue, otherwise wrong hctx is used and may hurt performance, especially when wrong SRCU readlock is acquired/released Reported-by: Bart Van Assche Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-mq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 1bcccedcc74f..4ddfa019face 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1619,9 +1619,12 @@ static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio) blk_mq_put_ctx(data.ctx); - if (same_queue_rq) + if (same_queue_rq) { + data.hctx = blk_mq_map_queue(q, + same_queue_rq->mq_ctx->cpu); blk_mq_try_issue_directly(data.hctx, same_queue_rq, &cookie); + } } else if (q->nr_hw_queues > 1 && is_sync) { blk_mq_put_ctx(data.ctx); blk_mq_bio_to_request(rq, bio); From d964f04a8fde84d978eff0d96561faa6e8de24de Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 6 Jun 2017 23:22:00 +0800 Subject: [PATCH 0500/1065] blk-mq: fix direct issue If queue is stopped, we shouldn't dispatch request into driver and hardware, unfortunately the check is removed in bd166ef183c2(blk-mq-sched: add framework for MQ capable IO schedulers). This patch fixes the issue by moving the check back into __blk_mq_try_issue_directly(). This patch fixes request use-after-free[1][2] during canceling requets of NVMe in nvme_dev_disable(), which can be triggered easily during NVMe reset & remove test. [1] oops kernel log when CONFIG_BLK_DEV_INTEGRITY is on [ 103.412969] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a [ 103.412980] IP: bio_integrity_advance+0x48/0xf0 [ 103.412981] PGD 275a88067 [ 103.412981] P4D 275a88067 [ 103.412982] PUD 276c43067 [ 103.412983] PMD 0 [ 103.412984] [ 103.412986] Oops: 0000 [#1] SMP [ 103.412989] Modules linked in: vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd cryptd ipmi_ssif iTCO_wdt iTCO_vendor_support mxm_wmi glue_helper dcdbas ipmi_si mei_me pcspkr mei sg ipmi_devintf lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel nvme ahci nvme_core libahci libata tg3 i2c_core megaraid_sas ptp pps_core dm_mirror dm_region_hash dm_log dm_mod [ 103.413035] CPU: 0 PID: 102 Comm: kworker/0:2 Not tainted 4.11.0+ #1 [ 103.413036] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 103.413041] Workqueue: events nvme_remove_dead_ctrl_work [nvme] [ 103.413043] task: ffff9cc8775c8000 task.stack: ffffc033c252c000 [ 103.413045] RIP: 0010:bio_integrity_advance+0x48/0xf0 [ 103.413046] RSP: 0018:ffffc033c252fc10 EFLAGS: 00010202 [ 103.413048] RAX: 0000000000000000 RBX: ffff9cc8720a8cc0 RCX: ffff9cca72958240 [ 103.413049] RDX: ffff9cca72958000 RSI: 0000000000000008 RDI: ffff9cc872537f00 [ 103.413049] RBP: ffffc033c252fc28 R08: 0000000000000000 R09: ffffffffb963a0d5 [ 103.413050] R10: 000000000000063e R11: 0000000000000000 R12: ffff9cc8720a8d18 [ 103.413051] R13: 0000000000001000 R14: ffff9cc872682e00 R15: 00000000fffffffb [ 103.413053] FS: 0000000000000000(0000) GS:ffff9cc877c00000(0000) knlGS:0000000000000000 [ 103.413054] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 103.413055] CR2: 000000000000000a CR3: 0000000276c41000 CR4: 00000000001406f0 [ 103.413056] Call Trace: [ 103.413063] bio_advance+0x2a/0xe0 [ 103.413067] blk_update_request+0x76/0x330 [ 103.413072] blk_mq_end_request+0x1a/0x70 [ 103.413074] blk_mq_dispatch_rq_list+0x370/0x410 [ 103.413076] ? blk_mq_flush_busy_ctxs+0x94/0xe0 [ 103.413080] blk_mq_sched_dispatch_requests+0x173/0x1a0 [ 103.413083] __blk_mq_run_hw_queue+0x8e/0xa0 [ 103.413085] __blk_mq_delay_run_hw_queue+0x9d/0xa0 [ 103.413088] blk_mq_start_hw_queue+0x17/0x20 [ 103.413090] blk_mq_start_hw_queues+0x32/0x50 [ 103.413095] nvme_kill_queues+0x54/0x80 [nvme_core] [ 103.413097] nvme_remove_dead_ctrl_work+0x1f/0x40 [nvme] [ 103.413103] process_one_work+0x149/0x360 [ 103.413105] worker_thread+0x4d/0x3c0 [ 103.413109] kthread+0x109/0x140 [ 103.413111] ? rescuer_thread+0x380/0x380 [ 103.413113] ? kthread_park+0x60/0x60 [ 103.413120] ret_from_fork+0x2c/0x40 [ 103.413121] Code: 08 4c 8b 63 50 48 8b 80 80 00 00 00 48 8b 90 d0 03 00 00 31 c0 48 83 ba 40 02 00 00 00 48 8d 8a 40 02 00 00 48 0f 45 c1 c1 ee 09 <0f> b6 48 0a 0f b6 40 09 41 89 f5 83 e9 09 41 d3 ed 44 0f af e8 [ 103.413145] RIP: bio_integrity_advance+0x48/0xf0 RSP: ffffc033c252fc10 [ 103.413146] CR2: 000000000000000a [ 103.413157] ---[ end trace cd6875d16eb5a11e ]--- [ 103.455368] Kernel panic - not syncing: Fatal exception [ 103.459826] Kernel Offset: 0x37600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 103.850916] ---[ end Kernel panic - not syncing: Fatal exception [ 103.857637] sched: Unexpected reschedule of offline CPU#1! [ 103.863762] ------------[ cut here ]------------ [2] kernel hang in blk_mq_freeze_queue_wait() when CONFIG_BLK_DEV_INTEGRITY is off [ 247.129825] INFO: task nvme-test:1772 blocked for more than 120 seconds. [ 247.137311] Not tainted 4.12.0-rc2.upstream+ #4 [ 247.142954] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.151704] Call Trace: [ 247.154445] __schedule+0x28a/0x880 [ 247.158341] schedule+0x36/0x80 [ 247.161850] blk_mq_freeze_queue_wait+0x4b/0xb0 [ 247.166913] ? remove_wait_queue+0x60/0x60 [ 247.171485] blk_freeze_queue+0x1a/0x20 [ 247.175770] blk_cleanup_queue+0x7f/0x140 [ 247.180252] nvme_ns_remove+0xa3/0xb0 [nvme_core] [ 247.185503] nvme_remove_namespaces+0x32/0x50 [nvme_core] [ 247.191532] nvme_uninit_ctrl+0x2d/0xa0 [nvme_core] [ 247.196977] nvme_remove+0x70/0x110 [nvme] [ 247.201545] pci_device_remove+0x39/0xc0 [ 247.205927] device_release_driver_internal+0x141/0x200 [ 247.211761] device_release_driver+0x12/0x20 [ 247.216531] pci_stop_bus_device+0x8c/0xa0 [ 247.221104] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [ 247.227420] remove_store+0x7c/0x90 [ 247.231320] dev_attr_store+0x18/0x30 [ 247.235409] sysfs_kf_write+0x3a/0x50 [ 247.239497] kernfs_fop_write+0xff/0x180 [ 247.243867] __vfs_write+0x37/0x160 [ 247.247757] ? selinux_file_permission+0xe5/0x120 [ 247.253011] ? security_file_permission+0x3b/0xc0 [ 247.258260] vfs_write+0xb2/0x1b0 [ 247.261964] ? syscall_trace_enter+0x1d0/0x2b0 [ 247.266924] SyS_write+0x55/0xc0 [ 247.270540] do_syscall_64+0x67/0x150 [ 247.274636] entry_SYSCALL64_slow_path+0x25/0x25 [ 247.279794] RIP: 0033:0x7f5c96740840 [ 247.283785] RSP: 002b:00007ffd00e87ee8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 247.292238] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5c96740840 [ 247.300194] RDX: 0000000000000002 RSI: 00007f5c97060000 RDI: 0000000000000001 [ 247.308159] RBP: 00007f5c97060000 R08: 000000000000000a R09: 00007f5c97059740 [ 247.316123] R10: 0000000000000001 R11: 0000000000000246 R12: 00007f5c96a14400 [ 247.324087] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 [ 370.016340] INFO: task nvme-test:1772 blocked for more than 120 seconds. Fixes: 12d70958a2e8(blk-mq: don't fail allocating driver tag for stopped hw queue) Cc: stable@vger.kernel.org Signed-off-by: Ming Lei Reviewed-by: Bart Van Assche Signed-off-by: Jens Axboe --- block/blk-mq.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 4ddfa019face..bb66c96850b1 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1461,22 +1461,28 @@ static blk_qc_t request_to_qc_t(struct blk_mq_hw_ctx *hctx, struct request *rq) return blk_tag_to_qc_t(rq->internal_tag, hctx->queue_num, true); } -static void __blk_mq_try_issue_directly(struct request *rq, blk_qc_t *cookie, - bool may_sleep) +static void __blk_mq_try_issue_directly(struct blk_mq_hw_ctx *hctx, + struct request *rq, + blk_qc_t *cookie, bool may_sleep) { struct request_queue *q = rq->q; struct blk_mq_queue_data bd = { .rq = rq, .last = true, }; - struct blk_mq_hw_ctx *hctx; blk_qc_t new_cookie; int ret; + bool run_queue = true; + + if (blk_mq_hctx_stopped(hctx)) { + run_queue = false; + goto insert; + } if (q->elevator) goto insert; - if (!blk_mq_get_driver_tag(rq, &hctx, false)) + if (!blk_mq_get_driver_tag(rq, NULL, false)) goto insert; new_cookie = request_to_qc_t(hctx, rq); @@ -1500,7 +1506,7 @@ static void __blk_mq_try_issue_directly(struct request *rq, blk_qc_t *cookie, __blk_mq_requeue_request(rq); insert: - blk_mq_sched_insert_request(rq, false, true, false, may_sleep); + blk_mq_sched_insert_request(rq, false, run_queue, false, may_sleep); } static void blk_mq_try_issue_directly(struct blk_mq_hw_ctx *hctx, @@ -1508,7 +1514,7 @@ static void blk_mq_try_issue_directly(struct blk_mq_hw_ctx *hctx, { if (!(hctx->flags & BLK_MQ_F_BLOCKING)) { rcu_read_lock(); - __blk_mq_try_issue_directly(rq, cookie, false); + __blk_mq_try_issue_directly(hctx, rq, cookie, false); rcu_read_unlock(); } else { unsigned int srcu_idx; @@ -1516,7 +1522,7 @@ static void blk_mq_try_issue_directly(struct blk_mq_hw_ctx *hctx, might_sleep(); srcu_idx = srcu_read_lock(&hctx->queue_rq_srcu); - __blk_mq_try_issue_directly(rq, cookie, true); + __blk_mq_try_issue_directly(hctx, rq, cookie, true); srcu_read_unlock(&hctx->queue_rq_srcu, srcu_idx); } } From 9bd2bbc01d17ddd567cc0f81f77fe1163e497462 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Fri, 2 Jun 2017 20:35:51 -0700 Subject: [PATCH 0501/1065] elevator: fix truncation of icq_cache_name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc 7.1 reports the following warning: block/elevator.c: In function ‘elv_register’: block/elevator.c:898:5: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=] "%s_io_cq", e->elevator_name); ^~~~~~~~~~ block/elevator.c:897:3: note: ‘snprintf’ output between 7 and 22 bytes into a destination of size 21 snprintf(e->icq_cache_name, sizeof(e->icq_cache_name), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s_io_cq", e->elevator_name); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The bug is that the name of the icq_cache is 6 characters longer than the elevator name, but only ELV_NAME_MAX + 5 characters were reserved for it --- so in the case of a maximum-length elevator name, the 'q' character in "_io_cq" would be truncated by snprintf(). Fix it by reserving ELV_NAME_MAX + 6 characters instead. Signed-off-by: Eric Biggers Reviewed-by: Bart Van Assche Signed-off-by: Jens Axboe --- include/linux/elevator.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 9ec5e22846e0..0e306c5a86d6 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -153,7 +153,7 @@ struct elevator_type #endif /* managed by elevator core */ - char icq_cache_name[ELV_NAME_MAX + 5]; /* elvname + "_io_cq" */ + char icq_cache_name[ELV_NAME_MAX + 6]; /* elvname + "_io_cq" */ struct list_head list; }; From 594238158bf748c285f0a73222cd9b7ccf3c525d Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 5 Jun 2017 10:04:52 +0100 Subject: [PATCH 0502/1065] net: stmmac: ensure jumbo_frm error return is correctly checked for -ve value The current comparison of entry < 0 will never be true since entry is an unsigned integer. Make entry an int to ensure -ve error return values from the call to jumbo_frm are correctly being caught. Detected by CoverityScan, CID#1238760 ("Macro compares unsigned to 0") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a74c481401c4..e5515c521d86 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2947,7 +2947,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) int i, csum_insertion = 0, is_jumbo = 0; u32 queue = skb_get_queue_mapping(skb); int nfrags = skb_shinfo(skb)->nr_frags; - unsigned int entry, first_entry; + int entry; + unsigned int first_entry; struct dma_desc *desc, *first; struct stmmac_tx_queue *tx_q; unsigned int enh_desc; From e3ebdb20fddacded2740a333ff66781e0d28b05c Mon Sep 17 00:00:00 2001 From: Richard Haines Date: Mon, 5 Jun 2017 16:44:40 +0100 Subject: [PATCH 0503/1065] net/ipv6: Fix CALIPSO causing GPF with datagram support When using CALIPSO with IPPROTO_UDP it is possible to trigger a GPF as the IP header may have moved. Also update the payload length after adding the CALIPSO option. Signed-off-by: Richard Haines Acked-by: Paul Moore Signed-off-by: Huw Davies Signed-off-by: David S. Miller --- net/ipv6/calipso.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv6/calipso.c b/net/ipv6/calipso.c index 37ac9de713c6..8d772fea1dde 100644 --- a/net/ipv6/calipso.c +++ b/net/ipv6/calipso.c @@ -1319,7 +1319,7 @@ static int calipso_skbuff_setattr(struct sk_buff *skb, struct ipv6hdr *ip6_hdr; struct ipv6_opt_hdr *hop; unsigned char buf[CALIPSO_MAX_BUFFER]; - int len_delta, new_end, pad; + int len_delta, new_end, pad, payload; unsigned int start, end; ip6_hdr = ipv6_hdr(skb); @@ -1346,6 +1346,8 @@ static int calipso_skbuff_setattr(struct sk_buff *skb, if (ret_val < 0) return ret_val; + ip6_hdr = ipv6_hdr(skb); /* Reset as skb_cow() may have moved it */ + if (len_delta) { if (len_delta > 0) skb_push(skb, len_delta); @@ -1355,6 +1357,8 @@ static int calipso_skbuff_setattr(struct sk_buff *skb, sizeof(*ip6_hdr) + start); skb_reset_network_header(skb); ip6_hdr = ipv6_hdr(skb); + payload = ntohs(ip6_hdr->payload_len); + ip6_hdr->payload_len = htons(payload + len_delta); } hop = (struct ipv6_opt_hdr *)(ip6_hdr + 1); From 79514ef670e9e575a1fe36922268c439d0f0ca8a Mon Sep 17 00:00:00 2001 From: Eugeniu Rosca Date: Tue, 6 Jun 2017 00:08:10 +0200 Subject: [PATCH 0504/1065] ravb: Fix use-after-free on `ifconfig eth0 down` Commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb07287d1 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [] dump_backtrace+0x0/0x3a4 [] show_stack+0x14/0x1c [] dump_stack+0xf8/0x150 [] print_address_description+0x7c/0x330 [] kasan_report+0x2e0/0x2f4 [] check_memory_region+0x20/0x14c [] memcpy+0x48/0x68 [] swiotlb_tbl_unmap_single+0xc4/0x35c [] unmap_single+0x90/0xa4 [] swiotlb_unmap_page+0xc/0x14 [] __swiotlb_unmap_page+0xcc/0xe4 [] ravb_ring_free+0x514/0x870 [] ravb_close+0x288/0x36c [] __dev_close_many+0x14c/0x174 [] __dev_close+0xc8/0x144 [] __dev_change_flags+0xd8/0x194 [] dev_change_flags+0x60/0xb0 [] devinet_ioctl+0x484/0x9d4 [] inet_ioctl+0x190/0x194 [] sock_do_ioctl+0x78/0xa8 [] sock_ioctl+0x110/0x3c4 [] vfs_ioctl+0x90/0xa0 [] do_vfs_ioctl+0x148/0xc38 [] SyS_ioctl+0x44/0x74 [] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea86bd ("ravb: unmap descriptors when freeing rings") Signed-off-by: Eugeniu Rosca Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 3cd7989c007d..784782da3a85 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -230,18 +230,6 @@ static void ravb_ring_free(struct net_device *ndev, int q) int ring_size; int i; - /* Free RX skb ringbuffer */ - if (priv->rx_skb[q]) { - for (i = 0; i < priv->num_rx_ring[q]; i++) - dev_kfree_skb(priv->rx_skb[q][i]); - } - kfree(priv->rx_skb[q]); - priv->rx_skb[q] = NULL; - - /* Free aligned TX buffers */ - kfree(priv->tx_align[q]); - priv->tx_align[q] = NULL; - if (priv->rx_ring[q]) { for (i = 0; i < priv->num_rx_ring[q]; i++) { struct ravb_ex_rx_desc *desc = &priv->rx_ring[q][i]; @@ -270,6 +258,18 @@ static void ravb_ring_free(struct net_device *ndev, int q) priv->tx_ring[q] = NULL; } + /* Free RX skb ringbuffer */ + if (priv->rx_skb[q]) { + for (i = 0; i < priv->num_rx_ring[q]; i++) + dev_kfree_skb(priv->rx_skb[q][i]); + } + kfree(priv->rx_skb[q]); + priv->rx_skb[q] = NULL; + + /* Free aligned TX buffers */ + kfree(priv->tx_align[q]); + priv->tx_align[q] = NULL; + /* Free TX skb ringbuffer. * SKBs are freed by ravb_tx_free() call above. */ From 1020ce3108cc26fbf09d70550ea2937cb1a211d2 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Tue, 6 Jun 2017 01:26:24 +0300 Subject: [PATCH 0505/1065] net: bridge: fix a null pointer dereference in br_afspec We might call br_afspec() with p == NULL which is a valid use case if the action is on the bridge device itself, but the bridge tunnel code dereferences the p pointer without checking, so check if p is null first. Reported-by: Gustavo A. R. Silva Fixes: efa5356b0d97 ("bridge: per vlan dst_metadata netlink support") Signed-off-by: Nikolay Aleksandrov Acked-by: Roopa Prabhu Signed-off-by: David S. Miller --- net/bridge/br_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index 574f78824d8a..32bd3ead9ba1 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -595,7 +595,7 @@ static int br_afspec(struct net_bridge *br, err = 0; switch (nla_type(attr)) { case IFLA_BRIDGE_VLAN_TUNNEL_INFO: - if (!(p->flags & BR_VLAN_TUNNEL)) + if (!p || !(p->flags & BR_VLAN_TUNNEL)) return -EINVAL; err = br_parse_vlan_tunnel_info(attr, &tinfo_curr); if (err) From d68c1f7fd1b7148dab5fe658321d511998969f2d Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Jun 2017 19:08:33 +0100 Subject: [PATCH 0506/1065] arm64: KVM: Preserve RES1 bits in SCTLR_EL2 __do_hyp_init has the rather bad habit of ignoring RES1 bits and writing them back as zero. On a v8.0-8.2 CPU, this doesn't do anything bad, but may end-up being pretty nasty on future revisions of the architecture. Let's preserve those bits so that we don't have to fix this later on. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Christoffer Dall --- arch/arm64/include/asm/sysreg.h | 4 ++++ arch/arm64/kvm/hyp-init.S | 10 ++++++---- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 15c142ce991c..b4d13d9267ff 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -286,6 +286,10 @@ #define SCTLR_ELx_A (1 << 1) #define SCTLR_ELx_M 1 +#define SCTLR_EL2_RES1 ((1 << 4) | (1 << 5) | (1 << 11) | (1 << 16) | \ + (1 << 16) | (1 << 18) | (1 << 22) | (1 << 23) | \ + (1 << 28) | (1 << 29)) + #define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ SCTLR_ELx_SA | SCTLR_ELx_I) diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S index 839425c24b1c..4072d408a4b4 100644 --- a/arch/arm64/kvm/hyp-init.S +++ b/arch/arm64/kvm/hyp-init.S @@ -106,10 +106,12 @@ __do_hyp_init: tlbi alle2 dsb sy - mrs x4, sctlr_el2 - and x4, x4, #SCTLR_ELx_EE // preserve endianness of EL2 - ldr x5, =SCTLR_ELx_FLAGS - orr x4, x4, x5 + /* + * Preserve all the RES1 bits while setting the default flags, + * as well as the EE bit on BE. + */ + ldr x4, =(SCTLR_EL2_RES1 | SCTLR_ELx_FLAGS) +CPU_BE( orr x4, x4, #SCTLR_ELx_EE) msr sctlr_el2, x4 isb From 78fd6dcf11468a5a131b8365580d0c613bcc02cb Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Jun 2017 19:08:34 +0100 Subject: [PATCH 0507/1065] arm64: KVM: Allow unaligned accesses at EL2 We currently have the SCTLR_EL2.A bit set, trapping unaligned accesses at EL2, but we're not really prepared to deal with it. So far, this has been unnoticed, until GCC 7 started emitting those (in particular 64bit writes on a 32bit boundary). Since the rest of the kernel is pretty happy about that, let's follow its example and set SCTLR_EL2.A to zero. Modern CPUs don't really care. Cc: stable@vger.kernel.org Reported-by: Alexander Graf Signed-off-by: Marc Zyngier Signed-off-by: Christoffer Dall --- arch/arm64/kvm/hyp-init.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S index 4072d408a4b4..3f9615582377 100644 --- a/arch/arm64/kvm/hyp-init.S +++ b/arch/arm64/kvm/hyp-init.S @@ -108,9 +108,10 @@ __do_hyp_init: /* * Preserve all the RES1 bits while setting the default flags, - * as well as the EE bit on BE. + * as well as the EE bit on BE. Drop the A flag since the compiler + * is allowed to generate unaligned accesses. */ - ldr x4, =(SCTLR_EL2_RES1 | SCTLR_ELx_FLAGS) + ldr x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A)) CPU_BE( orr x4, x4, #SCTLR_ELx_EE) msr sctlr_el2, x4 isb From 33b5c38852b29736f3b472dd095c9a18ec22746f Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Jun 2017 19:08:35 +0100 Subject: [PATCH 0508/1065] arm: KVM: Allow unaligned accesses at HYP We currently have the HSCTLR.A bit set, trapping unaligned accesses at HYP, but we're not really prepared to deal with it. Since the rest of the kernel is pretty happy about that, let's follow its example and set HSCTLR.A to zero. Modern CPUs don't really care. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Christoffer Dall --- arch/arm/kvm/init.S | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 570ed4a9c261..5386528665b5 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -104,7 +104,6 @@ __do_hyp_init: @ - Write permission implies XN: disabled @ - Instruction cache: enabled @ - Data/Unified cache: enabled - @ - Memory alignment checks: enabled @ - MMU: enabled (this code must be run from an identity mapping) mrc p15, 4, r0, c1, c0, 0 @ HSCR ldr r2, =HSCTLR_MASK @@ -112,8 +111,8 @@ __do_hyp_init: mrc p15, 0, r1, c1, c0, 0 @ SCTLR ldr r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C) and r1, r1, r2 - ARM( ldr r2, =(HSCTLR_M | HSCTLR_A) ) - THUMB( ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) ) + ARM( ldr r2, =(HSCTLR_M) ) + THUMB( ldr r2, =(HSCTLR_M | HSCTLR_TE) ) orr r1, r1, r2 orr r0, r0, r1 mcr p15, 4, r0, c1, c0, 0 @ HSCR From d220b942a4b6a0640aee78841608f4aa5e8e185e Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 5 Jun 2017 18:31:16 -0700 Subject: [PATCH 0509/1065] net: ethoc: enable NAPI before poll may be scheduled ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all. Move napi_enable above ethoc_reset in the ethoc_open to fix that. Fixes: a1702857724f ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by: Max Filippov Reviewed-by: Tobias Klauser Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/ethoc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index e863ba74d005..8bb0db990c8f 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -739,6 +739,8 @@ static int ethoc_open(struct net_device *dev) if (ret) return ret; + napi_enable(&priv->napi); + ethoc_init_ring(priv, dev->mem_start); ethoc_reset(priv); @@ -754,7 +756,6 @@ static int ethoc_open(struct net_device *dev) priv->old_duplex = -1; phy_start(dev->phydev); - napi_enable(&priv->napi); if (netif_msg_ifup(priv)) { dev_info(&dev->dev, "I/O: %08lx Memory: %08lx-%08lx\n", From 426849e6611f2092553f8d53372ae310818a6292 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Tue, 6 Jun 2017 09:25:00 +0200 Subject: [PATCH 0510/1065] net: stmmac: fix completely hung TX when using TSO stmmac_tso_allocator can fail to set the Last Descriptor bit on a descriptor that actually was the last descriptor. This happens when the buffer of the last descriptor ends up having a size of exactly TSO_MAX_BUFF_SIZE. When the IP eventually reaches the next last descriptor, which actually has the bit set, the DMA will hang. When the DMA hangs, we get a tx timeout, however, since stmmac does not do a complete reset of the IP in stmmac_tx_timeout, we end up in a state with completely hung TX. Signed-off-by: Niklas Cassel Acked-by: Giuseppe Cavallaro Acked-by: Alexandre TORGUE Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e5515c521d86..dcbe4537ad99 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2724,7 +2724,7 @@ static void stmmac_tso_allocator(struct stmmac_priv *priv, unsigned int des, priv->hw->desc->prepare_tso_tx_desc(desc, 0, buff_size, 0, 1, - (last_segment) && (buff_size < TSO_MAX_BUFF_SIZE), + (last_segment) && (tmp_len <= TSO_MAX_BUFF_SIZE), 0, 0); tmp_len -= TSO_MAX_BUFF_SIZE; From 1d3028f4c16487d63861ab6c68451768a7a109df Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 6 Jun 2017 14:10:49 +0100 Subject: [PATCH 0511/1065] net: stmmac: fix a broken u32 less than zero check The check that queue is less or equal to zero is always true because queue is a u32; queue is decremented and will wrap around and never go -ve. Fix this by making queue an int. Detected by CoverityScan, CID#1428988 ("Unsigned compared against 0") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index dcbe4537ad99..12236daf7bb6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1208,7 +1208,7 @@ static int init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags) u32 rx_count = priv->plat->rx_queues_to_use; unsigned int bfsize = 0; int ret = -ENOMEM; - u32 queue; + int queue; int i; if (priv->hw->mode->set_16kib_bfsize) From c79a13734d104b5b147d7cb0870276ccdd660dae Mon Sep 17 00:00:00 2001 From: Jane Chu Date: Tue, 6 Jun 2017 14:32:29 -0600 Subject: [PATCH 0512/1065] arch/sparc: support NR_CPUS = 4096 Linux SPARC64 limits NR_CPUS to 4064 because init_cpu_send_mondo_info() only allocates a single page for NR_CPUS mondo entries. Thus we cannot use all 4096 CPUs on some SPARC platforms. To fix, allocate (2^order) pages where order is set according to the size of cpu_list for possible cpus. Since cpu_list_pa and cpu_mondo_block_pa are not used in asm code, there are no imm13 offsets from the base PA that will break because they can only reach one page. Orabug: 25505750 Signed-off-by: Jane Chu Reviewed-by: Bob Picco Reviewed-by: Atish Patra Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 4 ++-- arch/sparc/kernel/irq_64.c | 17 +++++++++++++---- 2 files changed, 15 insertions(+), 6 deletions(-) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index e544ac12737e..b558c9e29de3 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -192,9 +192,9 @@ config NR_CPUS int "Maximum number of CPUs" depends on SMP range 2 32 if SPARC32 - range 2 1024 if SPARC64 + range 2 4096 if SPARC64 default 32 if SPARC32 - default 64 if SPARC64 + default 4096 if SPARC64 source kernel/Kconfig.hz diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index 4d0248aa0928..99dd133a029f 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -1034,17 +1034,26 @@ static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb) { #ifdef CONFIG_SMP unsigned long page; + void *mondo, *p; - BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64)); + BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > PAGE_SIZE); + + /* Make sure mondo block is 64byte aligned */ + p = kzalloc(127, GFP_KERNEL); + if (!p) { + prom_printf("SUN4V: Error, cannot allocate mondo block.\n"); + prom_halt(); + } + mondo = (void *)(((unsigned long)p + 63) & ~0x3f); + tb->cpu_mondo_block_pa = __pa(mondo); page = get_zeroed_page(GFP_KERNEL); if (!page) { - prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n"); + prom_printf("SUN4V: Error, cannot allocate cpu list page.\n"); prom_halt(); } - tb->cpu_mondo_block_pa = __pa(page); - tb->cpu_list_pa = __pa(page + 64); + tb->cpu_list_pa = __pa(page); #endif } From 654f4807624a657f364417c2a7454f0df9961734 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Fri, 2 Jun 2017 14:51:12 -0700 Subject: [PATCH 0513/1065] sparc64: mm: fix copy_tsb to correctly copy huge page TSBs When a TSB grows beyond its current capacity, a new TSB is allocated and copy_tsb is called to copy entries from the old TSB to the new. A hash shift based on page size is used to calculate the index of an entry in the TSB. copy_tsb has hard coded PAGE_SHIFT in these calculations. However, for huge page TSBs the value REAL_HPAGE_SHIFT should be used. As a result, when copy_tsb is called for a huge page TSB the entries are placed at the incorrect index in the newly allocated TSB. When doing hardware table walk, the MMU does not match these entries and we end up in the TSB miss handling code. This code will then create and write an entry to the correct index in the TSB. We take a performance hit for the table walk miss and recreation of these entries. Pass a new parameter to copy_tsb that is the page size shift to be used when copying the TSB. Suggested-by: Anthony Yznaga Signed-off-by: Mike Kravetz Signed-off-by: David S. Miller --- arch/sparc/kernel/tsb.S | 11 +++++++---- arch/sparc/mm/tsb.c | 7 +++++-- 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/sparc/kernel/tsb.S b/arch/sparc/kernel/tsb.S index 10689cfd0ad4..07c0df924960 100644 --- a/arch/sparc/kernel/tsb.S +++ b/arch/sparc/kernel/tsb.S @@ -455,13 +455,16 @@ __tsb_context_switch: .type copy_tsb,#function copy_tsb: /* %o0=old_tsb_base, %o1=old_tsb_size * %o2=new_tsb_base, %o3=new_tsb_size + * %o4=page_size_shift */ sethi %uhi(TSB_PASS_BITS), %g7 srlx %o3, 4, %o3 - add %o0, %o1, %g1 /* end of old tsb */ + add %o0, %o1, %o1 /* end of old tsb */ sllx %g7, 32, %g7 sub %o3, 1, %o3 /* %o3 == new tsb hash mask */ + mov %o4, %g1 /* page_size_shift */ + 661: prefetcha [%o0] ASI_N, #one_read .section .tsb_phys_patch, "ax" .word 661b @@ -486,9 +489,9 @@ copy_tsb: /* %o0=old_tsb_base, %o1=old_tsb_size /* This can definitely be computed faster... */ srlx %o0, 4, %o5 /* Build index */ and %o5, 511, %o5 /* Mask index */ - sllx %o5, PAGE_SHIFT, %o5 /* Put into vaddr position */ + sllx %o5, %g1, %o5 /* Put into vaddr position */ or %o4, %o5, %o4 /* Full VADDR. */ - srlx %o4, PAGE_SHIFT, %o4 /* Shift down to create index */ + srlx %o4, %g1, %o4 /* Shift down to create index */ and %o4, %o3, %o4 /* Mask with new_tsb_nents-1 */ sllx %o4, 4, %o4 /* Shift back up into tsb ent offset */ TSB_STORE(%o2 + %o4, %g2) /* Store TAG */ @@ -496,7 +499,7 @@ copy_tsb: /* %o0=old_tsb_base, %o1=old_tsb_size TSB_STORE(%o2 + %o4, %g3) /* Store TTE */ 80: add %o0, 16, %o0 - cmp %o0, %g1 + cmp %o0, %o1 bne,pt %xcc, 90b nop diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c index bedf08b22a47..0d4b998c7d7b 100644 --- a/arch/sparc/mm/tsb.c +++ b/arch/sparc/mm/tsb.c @@ -496,7 +496,8 @@ retry_tsb_alloc: extern void copy_tsb(unsigned long old_tsb_base, unsigned long old_tsb_size, unsigned long new_tsb_base, - unsigned long new_tsb_size); + unsigned long new_tsb_size, + unsigned long page_size_shift); unsigned long old_tsb_base = (unsigned long) old_tsb; unsigned long new_tsb_base = (unsigned long) new_tsb; @@ -504,7 +505,9 @@ retry_tsb_alloc: old_tsb_base = __pa(old_tsb_base); new_tsb_base = __pa(new_tsb_base); } - copy_tsb(old_tsb_base, old_size, new_tsb_base, new_size); + copy_tsb(old_tsb_base, old_size, new_tsb_base, new_size, + tsb_index == MM_TSB_BASE ? + PAGE_SHIFT : REAL_HPAGE_SHIFT); } mm->context.tsb_block[tsb_index].tsb = new_tsb; From c982aa9c304bf0b9a7522fd118fed4afa5a0263c Mon Sep 17 00:00:00 2001 From: James Clarke Date: Mon, 29 May 2017 20:17:56 +0100 Subject: [PATCH 0514/1065] sparc: Machine description indices can vary VIO devices were being looked up by their index in the machine description node block, but this often varies over time as devices are added and removed. Instead, store the ID and look up using the type, config handle and ID. Signed-off-by: James Clarke Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112541 Signed-off-by: David S. Miller --- arch/sparc/include/asm/vio.h | 1 + arch/sparc/kernel/vio.c | 68 +++++++++++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 4 deletions(-) diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h index 8174f6cdbbbb..9dca7a892978 100644 --- a/arch/sparc/include/asm/vio.h +++ b/arch/sparc/include/asm/vio.h @@ -327,6 +327,7 @@ struct vio_dev { int compat_len; u64 dev_no; + u64 id; unsigned long channel_id; diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c index f6bb857254fc..075d38980dee 100644 --- a/arch/sparc/kernel/vio.c +++ b/arch/sparc/kernel/vio.c @@ -302,13 +302,16 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp, if (!id) { dev_set_name(&vdev->dev, "%s", bus_id_name); vdev->dev_no = ~(u64)0; + vdev->id = ~(u64)0; } else if (!cfg_handle) { dev_set_name(&vdev->dev, "%s-%llu", bus_id_name, *id); vdev->dev_no = *id; + vdev->id = ~(u64)0; } else { dev_set_name(&vdev->dev, "%s-%llu-%llu", bus_id_name, *cfg_handle, *id); vdev->dev_no = *cfg_handle; + vdev->id = *id; } vdev->dev.parent = parent; @@ -351,27 +354,84 @@ static void vio_add(struct mdesc_handle *hp, u64 node) (void) vio_create_one(hp, node, &root_vdev->dev); } +struct vio_md_node_query { + const char *type; + u64 dev_no; + u64 id; +}; + static int vio_md_node_match(struct device *dev, void *arg) { + struct vio_md_node_query *query = (struct vio_md_node_query *) arg; struct vio_dev *vdev = to_vio_dev(dev); - if (vdev->mp == (u64) arg) - return 1; + if (vdev->dev_no != query->dev_no) + return 0; + if (vdev->id != query->id) + return 0; + if (strcmp(vdev->type, query->type)) + return 0; - return 0; + return 1; } static void vio_remove(struct mdesc_handle *hp, u64 node) { + const char *type; + const u64 *id, *cfg_handle; + u64 a; + struct vio_md_node_query query; struct device *dev; - dev = device_find_child(&root_vdev->dev, (void *) node, + type = mdesc_get_property(hp, node, "device-type", NULL); + if (!type) { + type = mdesc_get_property(hp, node, "name", NULL); + if (!type) + type = mdesc_node_name(hp, node); + } + + query.type = type; + + id = mdesc_get_property(hp, node, "id", NULL); + cfg_handle = NULL; + mdesc_for_each_arc(a, hp, node, MDESC_ARC_TYPE_BACK) { + u64 target; + + target = mdesc_arc_target(hp, a); + cfg_handle = mdesc_get_property(hp, target, + "cfg-handle", NULL); + if (cfg_handle) + break; + } + + if (!id) { + query.dev_no = ~(u64)0; + query.id = ~(u64)0; + } else if (!cfg_handle) { + query.dev_no = *id; + query.id = ~(u64)0; + } else { + query.dev_no = *cfg_handle; + query.id = *id; + } + + dev = device_find_child(&root_vdev->dev, &query, vio_md_node_match); if (dev) { printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev)); device_unregister(dev); put_device(dev); + } else { + if (!id) + printk(KERN_ERR "VIO: Removed unknown %s node.\n", + type); + else if (!cfg_handle) + printk(KERN_ERR "VIO: Removed unknown %s node %llu.\n", + type, *id); + else + printk(KERN_ERR "VIO: Removed unknown %s node %llu-%llu.\n", + type, *cfg_handle, *id); } } From f322980b74a15e08f8c70a34a5864ecdbf957251 Mon Sep 17 00:00:00 2001 From: "Liam R. Howlett" Date: Tue, 30 May 2017 15:45:00 -0400 Subject: [PATCH 0515/1065] sparc/mm/hugepages: Fix setup_hugepagesz for invalid values. hugetlb_bad_size needs to be called on invalid values. Also change the pr_warn to a pr_err to better align with other platforms. Signed-off-by: Liam R. Howlett Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 0cda653ae007..7ca1b9dc7d64 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -358,7 +358,8 @@ static int __init setup_hugepagesz(char *string) } if ((hv_pgsz_mask & cpu_pgsz_mask) == 0U) { - pr_warn("hugepagesz=%llu not supported by MMU.\n", + hugetlb_bad_size(); + pr_err("hugepagesz=%llu not supported by MMU.\n", hugepage_size); goto out; } From 588974857359861891f478a070b1dc7ae04a3880 Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Wed, 31 May 2017 11:25:20 -0400 Subject: [PATCH 0516/1065] sparc64: reset mm cpumask after wrap After a wrap (getting a new context version) a process must get a new context id, which means that we would need to flush the context id from the TLB before running for the first time with this ID on every CPU. But, we use mm_cpumask to determine if this process has been running on this CPU before, and this mask is not reset after a wrap. So, there are two possible fixes for this issue: 1. Clear mm cpumask whenever mm gets a new context id 2. Unconditionally flush context every time process is running on a CPU This patch implements the first solution Signed-off-by: Pavel Tatashin Reviewed-by: Bob Picco Reviewed-by: Steven Sistare Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 7ca1b9dc7d64..f8e30a3906be 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -759,6 +759,8 @@ void get_new_mmu_context(struct mm_struct *mm) goto out; } } + if (mm->context.sparc64_ctx_val) + cpumask_clear(mm_cpumask(mm)); mmu_context_bmap[new_ctx>>6] |= (1UL << (new_ctx & 63)); new_ctx |= (tlb_context_cache & CTX_VERSION_MASK); out: From 14d0334c6748ff2aedb3f2f7fdc51ee90a9b54e7 Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Wed, 31 May 2017 11:25:21 -0400 Subject: [PATCH 0517/1065] sparc64: combine activate_mm and switch_mm The only difference between these two functions is that in activate_mm we unconditionally flush context. However, there is no need to keep this difference after fixing a bug where cpumask was not reset on a wrap. So, in this patch we combine these. Signed-off-by: Pavel Tatashin Reviewed-by: Bob Picco Reviewed-by: Steven Sistare Signed-off-by: David S. Miller --- arch/sparc/include/asm/mmu_context_64.h | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h index 22fede6eba11..734a1343d77d 100644 --- a/arch/sparc/include/asm/mmu_context_64.h +++ b/arch/sparc/include/asm/mmu_context_64.h @@ -133,26 +133,7 @@ static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, str } #define deactivate_mm(tsk,mm) do { } while (0) - -/* Activate a new MM instance for the current task. */ -static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm) -{ - unsigned long flags; - int cpu; - - spin_lock_irqsave(&mm->context.lock, flags); - if (!CTX_VALID(mm->context)) - get_new_mmu_context(mm); - cpu = smp_processor_id(); - if (!cpumask_test_cpu(cpu, mm_cpumask(mm))) - cpumask_set_cpu(cpu, mm_cpumask(mm)); - - load_secondary_context(mm); - __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT); - tsb_context_switch(mm); - spin_unlock_irqrestore(&mm->context.lock, flags); -} - +#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, NULL) #endif /* !(__ASSEMBLY__) */ #endif /* !(__SPARC64_MMU_CONTEXT_H) */ From c4415235b2be0cc791572e8e7f7466ab8f73a2bf Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Wed, 31 May 2017 11:25:22 -0400 Subject: [PATCH 0518/1065] sparc64: redefine first version CTX_FIRST_VERSION defines the first context version, but also it defines first context. This patch redefines it to only include the first context version. Signed-off-by: Pavel Tatashin Reviewed-by: Bob Picco Reviewed-by: Steven Sistare Signed-off-by: David S. Miller --- arch/sparc/include/asm/mmu_64.h | 2 +- arch/sparc/mm/init_64.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/sparc/include/asm/mmu_64.h b/arch/sparc/include/asm/mmu_64.h index f7de0dbc38af..83b36a5371ff 100644 --- a/arch/sparc/include/asm/mmu_64.h +++ b/arch/sparc/include/asm/mmu_64.h @@ -52,7 +52,7 @@ #define CTX_NR_MASK TAG_CONTEXT_BITS #define CTX_HW_MASK (CTX_NR_MASK | CTX_PGSZ_MASK) -#define CTX_FIRST_VERSION ((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL)) +#define CTX_FIRST_VERSION BIT(CTX_VERSION_SHIFT) #define CTX_VALID(__ctx) \ (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK)) #define CTX_HWBITS(__ctx) ((__ctx.sparc64_ctx_val) & CTX_HW_MASK) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index f8e30a3906be..63b50447bb62 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -707,7 +707,7 @@ EXPORT_SYMBOL(__flush_dcache_range); /* get_new_mmu_context() uses "cache + 1". */ DEFINE_SPINLOCK(ctx_alloc_lock); -unsigned long tlb_context_cache = CTX_FIRST_VERSION - 1; +unsigned long tlb_context_cache = CTX_FIRST_VERSION; #define MAX_CTX_NR (1UL << CTX_NR_BITS) #define CTX_BMAP_SLOTS BITS_TO_LONGS(MAX_CTX_NR) DECLARE_BITMAP(mmu_context_bmap, MAX_CTX_NR); @@ -738,9 +738,9 @@ void get_new_mmu_context(struct mm_struct *mm) if (new_ctx >= ctx) { int i; new_ctx = (tlb_context_cache & CTX_VERSION_MASK) + - CTX_FIRST_VERSION; + CTX_FIRST_VERSION + 1; if (new_ctx == 1) - new_ctx = CTX_FIRST_VERSION; + new_ctx = CTX_FIRST_VERSION + 1; /* Don't call memset, for 16 entries that's just * plain silly... From 7a5b4bbf49fe86ce77488a70c5dccfe2d50d7a2d Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Wed, 31 May 2017 11:25:23 -0400 Subject: [PATCH 0519/1065] sparc64: add per-cpu mm of secondary contexts The new wrap is going to use information from this array to figure out mm's that currently have valid secondary contexts setup. Signed-off-by: Pavel Tatashin Reviewed-by: Bob Picco Reviewed-by: Steven Sistare Signed-off-by: David S. Miller --- arch/sparc/include/asm/mmu_context_64.h | 5 +++-- arch/sparc/mm/init_64.c | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h index 734a1343d77d..edb45247bfa9 100644 --- a/arch/sparc/include/asm/mmu_context_64.h +++ b/arch/sparc/include/asm/mmu_context_64.h @@ -19,6 +19,7 @@ extern spinlock_t ctx_alloc_lock; extern unsigned long tlb_context_cache; extern unsigned long mmu_context_bmap[]; +DECLARE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm); void get_new_mmu_context(struct mm_struct *mm); #ifdef CONFIG_SMP void smp_new_mmu_context_version(void); @@ -76,8 +77,9 @@ void __flush_tlb_mm(unsigned long, unsigned long); static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk) { unsigned long ctx_valid, flags; - int cpu; + int cpu = smp_processor_id(); + per_cpu(per_cpu_secondary_mm, cpu) = mm; if (unlikely(mm == &init_mm)) return; @@ -123,7 +125,6 @@ static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, str * for the first time, we must flush that context out of the * local TLB. */ - cpu = smp_processor_id(); if (!ctx_valid || !cpumask_test_cpu(cpu, mm_cpumask(mm))) { cpumask_set_cpu(cpu, mm_cpumask(mm)); __flush_tlb_mm(CTX_HWBITS(mm->context), diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 63b50447bb62..a4c0bc8af820 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -711,6 +711,7 @@ unsigned long tlb_context_cache = CTX_FIRST_VERSION; #define MAX_CTX_NR (1UL << CTX_NR_BITS) #define CTX_BMAP_SLOTS BITS_TO_LONGS(MAX_CTX_NR) DECLARE_BITMAP(mmu_context_bmap, MAX_CTX_NR); +DEFINE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm) = {0}; /* Caller does TLB context flushing on local CPU if necessary. * The caller also ensures that CTX_VALID(mm->context) is false. From a0582f26ec9dfd5360ea2f35dd9a1b026f8adda0 Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Wed, 31 May 2017 11:25:24 -0400 Subject: [PATCH 0520/1065] sparc64: new context wrap The current wrap implementation has a race issue: it is called outside of the ctx_alloc_lock, and also does not wait for all CPUs to complete the wrap. This means that a thread can get a new context with a new version and another thread might still be running with the same context. The problem is especially severe on CPUs with shared TLBs, like sun4v. I used the following test to very quickly reproduce the problem: - start over 8K processes (must be more than context IDs) - write and read values at a memory location in every process. Very quickly memory corruptions start happening, and what we read back does not equal what we wrote. Several approaches were explored before settling on this one: Approach 1: Move smp_new_mmu_context_version() inside ctx_alloc_lock, and wait for every process to complete the wrap. (Note: every CPU must WAIT before leaving smp_new_mmu_context_version_client() until every one arrives). This approach ends up with deadlocks, as some threads own locks which other threads are waiting for, and they never receive softint until these threads exit smp_new_mmu_context_version_client(). Since we do not allow the exit, deadlock happens. Approach 2: Handle wrap right during mondo interrupt. Use etrap/rtrap to enter into into C code, and issue new versions to every CPU. This approach adds some overhead to runtime: in switch_mm() we must add some checks to make sure that versions have not changed due to wrap while we were loading the new secondary context. (could be protected by PSTATE_IE but that degrades performance as on M7 and older CPUs as it takes 50 cycles for each access). Also, we still need a global per-cpu array of MMs to know where we need to load new contexts, otherwise we can change context to a thread that is going way (if we received mondo between switch_mm() and switch_to() time). Finally, there are some issues with window registers in rtrap() when context IDs are changed during CPU mondo time. The approach in this patch is the simplest and has almost no impact on runtime. We use the array with mm's where last secondary contexts were loaded onto CPUs and bump their versions to the new generation without changing context IDs. If a new process comes in to get a context ID, it will go through get_new_mmu_context() because of version mismatch. But the running processes do not need to be interrupted. And wrap is quicker as we do not need to xcall and wait for everyone to receive and complete wrap. Signed-off-by: Pavel Tatashin Reviewed-by: Bob Picco Reviewed-by: Steven Sistare Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.c | 81 +++++++++++++++++++++++++++-------------- 1 file changed, 54 insertions(+), 27 deletions(-) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index a4c0bc8af820..3c40ebd50f92 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -713,6 +713,53 @@ unsigned long tlb_context_cache = CTX_FIRST_VERSION; DECLARE_BITMAP(mmu_context_bmap, MAX_CTX_NR); DEFINE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm) = {0}; +static void mmu_context_wrap(void) +{ + unsigned long old_ver = tlb_context_cache & CTX_VERSION_MASK; + unsigned long new_ver, new_ctx, old_ctx; + struct mm_struct *mm; + int cpu; + + bitmap_zero(mmu_context_bmap, 1 << CTX_NR_BITS); + + /* Reserve kernel context */ + set_bit(0, mmu_context_bmap); + + new_ver = (tlb_context_cache & CTX_VERSION_MASK) + CTX_FIRST_VERSION; + if (unlikely(new_ver == 0)) + new_ver = CTX_FIRST_VERSION; + tlb_context_cache = new_ver; + + /* + * Make sure that any new mm that are added into per_cpu_secondary_mm, + * are going to go through get_new_mmu_context() path. + */ + mb(); + + /* + * Updated versions to current on those CPUs that had valid secondary + * contexts + */ + for_each_online_cpu(cpu) { + /* + * If a new mm is stored after we took this mm from the array, + * it will go into get_new_mmu_context() path, because we + * already bumped the version in tlb_context_cache. + */ + mm = per_cpu(per_cpu_secondary_mm, cpu); + + if (unlikely(!mm || mm == &init_mm)) + continue; + + old_ctx = mm->context.sparc64_ctx_val; + if (likely((old_ctx & CTX_VERSION_MASK) == old_ver)) { + new_ctx = (old_ctx & ~CTX_VERSION_MASK) | new_ver; + set_bit(new_ctx & CTX_NR_MASK, mmu_context_bmap); + mm->context.sparc64_ctx_val = new_ctx; + } + } +} + /* Caller does TLB context flushing on local CPU if necessary. * The caller also ensures that CTX_VALID(mm->context) is false. * @@ -727,50 +774,30 @@ void get_new_mmu_context(struct mm_struct *mm) { unsigned long ctx, new_ctx; unsigned long orig_pgsz_bits; - int new_version; spin_lock(&ctx_alloc_lock); +retry: + /* wrap might have happened, test again if our context became valid */ + if (unlikely(CTX_VALID(mm->context))) + goto out; orig_pgsz_bits = (mm->context.sparc64_ctx_val & CTX_PGSZ_MASK); ctx = (tlb_context_cache + 1) & CTX_NR_MASK; new_ctx = find_next_zero_bit(mmu_context_bmap, 1 << CTX_NR_BITS, ctx); - new_version = 0; if (new_ctx >= (1 << CTX_NR_BITS)) { new_ctx = find_next_zero_bit(mmu_context_bmap, ctx, 1); if (new_ctx >= ctx) { - int i; - new_ctx = (tlb_context_cache & CTX_VERSION_MASK) + - CTX_FIRST_VERSION + 1; - if (new_ctx == 1) - new_ctx = CTX_FIRST_VERSION + 1; - - /* Don't call memset, for 16 entries that's just - * plain silly... - */ - mmu_context_bmap[0] = 3; - mmu_context_bmap[1] = 0; - mmu_context_bmap[2] = 0; - mmu_context_bmap[3] = 0; - for (i = 4; i < CTX_BMAP_SLOTS; i += 4) { - mmu_context_bmap[i + 0] = 0; - mmu_context_bmap[i + 1] = 0; - mmu_context_bmap[i + 2] = 0; - mmu_context_bmap[i + 3] = 0; - } - new_version = 1; - goto out; + mmu_context_wrap(); + goto retry; } } if (mm->context.sparc64_ctx_val) cpumask_clear(mm_cpumask(mm)); mmu_context_bmap[new_ctx>>6] |= (1UL << (new_ctx & 63)); new_ctx |= (tlb_context_cache & CTX_VERSION_MASK); -out: tlb_context_cache = new_ctx; mm->context.sparc64_ctx_val = new_ctx | orig_pgsz_bits; +out: spin_unlock(&ctx_alloc_lock); - - if (unlikely(new_version)) - smp_new_mmu_context_version(); } static int numa_enabled = 1; From 0197e41ce70511dc3b71f7fefa1a676e2b5cd60b Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Wed, 31 May 2017 11:25:25 -0400 Subject: [PATCH 0521/1065] sparc64: delete old wrap code The old method that is using xcall and softint to get new context id is deleted, as it is replaced by a method of using per_cpu_secondary_mm without xcall to perform the context wrap. Signed-off-by: Pavel Tatashin Reviewed-by: Bob Picco Reviewed-by: Steven Sistare Signed-off-by: David S. Miller --- arch/sparc/include/asm/mmu_context_64.h | 6 ----- arch/sparc/include/asm/pil.h | 1 - arch/sparc/kernel/kernel.h | 1 - arch/sparc/kernel/smp_64.c | 31 ------------------------- arch/sparc/kernel/ttable_64.S | 2 +- arch/sparc/mm/ultra.S | 5 ---- 6 files changed, 1 insertion(+), 45 deletions(-) diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h index edb45247bfa9..2cddcda4f85f 100644 --- a/arch/sparc/include/asm/mmu_context_64.h +++ b/arch/sparc/include/asm/mmu_context_64.h @@ -21,12 +21,6 @@ extern unsigned long mmu_context_bmap[]; DECLARE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm); void get_new_mmu_context(struct mm_struct *mm); -#ifdef CONFIG_SMP -void smp_new_mmu_context_version(void); -#else -#define smp_new_mmu_context_version() do { } while (0) -#endif - int init_new_context(struct task_struct *tsk, struct mm_struct *mm); void destroy_context(struct mm_struct *mm); diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h index 266937030546..522b43db2ed3 100644 --- a/arch/sparc/include/asm/pil.h +++ b/arch/sparc/include/asm/pil.h @@ -20,7 +20,6 @@ #define PIL_SMP_CALL_FUNC 1 #define PIL_SMP_RECEIVE_SIGNAL 2 #define PIL_SMP_CAPTURE 3 -#define PIL_SMP_CTX_NEW_VERSION 4 #define PIL_DEVICE_IRQ 5 #define PIL_SMP_CALL_FUNC_SNGL 6 #define PIL_DEFERRED_PCR_WORK 7 diff --git a/arch/sparc/kernel/kernel.h b/arch/sparc/kernel/kernel.h index c9804551262c..6ae1e77be0bf 100644 --- a/arch/sparc/kernel/kernel.h +++ b/arch/sparc/kernel/kernel.h @@ -37,7 +37,6 @@ void handle_stdfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr /* smp_64.c */ void __irq_entry smp_call_function_client(int irq, struct pt_regs *regs); void __irq_entry smp_call_function_single_client(int irq, struct pt_regs *regs); -void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs); void __irq_entry smp_penguin_jailcell(int irq, struct pt_regs *regs); void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs); diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index b3bc0ac757cc..fdf31040a7dc 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -964,37 +964,6 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) preempt_enable(); } -void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs) -{ - struct mm_struct *mm; - unsigned long flags; - - clear_softint(1 << irq); - - /* See if we need to allocate a new TLB context because - * the version of the one we are using is now out of date. - */ - mm = current->active_mm; - if (unlikely(!mm || (mm == &init_mm))) - return; - - spin_lock_irqsave(&mm->context.lock, flags); - - if (unlikely(!CTX_VALID(mm->context))) - get_new_mmu_context(mm); - - spin_unlock_irqrestore(&mm->context.lock, flags); - - load_secondary_context(mm); - __flush_tlb_mm(CTX_HWBITS(mm->context), - SECONDARY_CONTEXT); -} - -void smp_new_mmu_context_version(void) -{ - smp_cross_call(&xcall_new_mmu_context_version, 0, 0, 0); -} - #ifdef CONFIG_KGDB void kgdb_roundup_cpus(unsigned long flags) { diff --git a/arch/sparc/kernel/ttable_64.S b/arch/sparc/kernel/ttable_64.S index 7bd8f6556352..efe93ab4a9c0 100644 --- a/arch/sparc/kernel/ttable_64.S +++ b/arch/sparc/kernel/ttable_64.S @@ -50,7 +50,7 @@ tl0_resv03e: BTRAP(0x3e) BTRAP(0x3f) BTRAP(0x40) tl0_irq1: TRAP_IRQ(smp_call_function_client, 1) tl0_irq2: TRAP_IRQ(smp_receive_signal_client, 2) tl0_irq3: TRAP_IRQ(smp_penguin_jailcell, 3) -tl0_irq4: TRAP_IRQ(smp_new_mmu_context_version_client, 4) +tl0_irq4: BTRAP(0x44) #else tl0_irq1: BTRAP(0x41) tl0_irq2: BTRAP(0x42) diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S index 5d2fd6cd3189..fcf4d27a38fb 100644 --- a/arch/sparc/mm/ultra.S +++ b/arch/sparc/mm/ultra.S @@ -971,11 +971,6 @@ xcall_capture: wr %g0, (1 << PIL_SMP_CAPTURE), %set_softint retry - .globl xcall_new_mmu_context_version -xcall_new_mmu_context_version: - wr %g0, (1 << PIL_SMP_CTX_NEW_VERSION), %set_softint - retry - #ifdef CONFIG_KGDB .globl xcall_kgdb_capture xcall_kgdb_capture: From abb2ea7dfd82451d85ce669b811310c05ab5ca46 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 6 Jun 2017 13:36:24 -0700 Subject: [PATCH 0522/1065] compiler, clang: suppress warning for unused static inline functions GCC explicitly does not warn for unused static inline functions for -Wunused-function. The manual states: Warn whenever a static function is declared but not defined or a non-inline static function is unused. Clang does warn for static inline functions that are unused. It turns out that suppressing the warnings avoids potentially complex #ifdef directives, which also reduces LOC. Suppress the warning for clang. Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds --- include/linux/compiler-clang.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h index de179993e039..ea9126006a69 100644 --- a/include/linux/compiler-clang.h +++ b/include/linux/compiler-clang.h @@ -15,3 +15,10 @@ * with any version that can compile the kernel */ #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) + +/* + * GCC does not warn about unused static inline functions for + * -Wunused-function. This turns out to avoid the need for complex #ifdef + * directives. Suppress the warning in clang as well. + */ +#define inline inline __attribute__((unused)) From f3b7eaae1b35eb8077610eb7c7db042c9b0645e1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 7 Jun 2017 00:57:37 +0200 Subject: [PATCH 0523/1065] Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle" Revert commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) as it turned out to be premature and triggered a number of different issues on various systems. That includes, but is not limited to, premature suspend-to-RAM aborts on Dell XPS 13 (9343) reported by Dominik. The issue the commit in question attempted to address is real and will need to be taken care of going forward, but evidently more work is needed for this purpose. Reported-by: Dominik Brodowski Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 2 +- drivers/acpi/button.c | 5 ++--- drivers/acpi/device_pm.c | 3 +-- drivers/acpi/sleep.c | 28 ---------------------------- drivers/base/power/main.c | 5 +++++ drivers/base/power/wakeup.c | 18 ++++++------------ include/linux/suspend.h | 7 ++----- kernel/power/process.c | 2 +- kernel/power/suspend.c | 29 ++++------------------------- 9 files changed, 22 insertions(+), 77 deletions(-) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 83ab17e4a795..4ef1e4624b2b 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -776,7 +776,7 @@ static int acpi_battery_update(struct acpi_battery *battery, bool resume) if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) || (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && (battery->capacity_now <= battery->alarm))) - pm_wakeup_hard_event(&battery->device->dev); + pm_wakeup_event(&battery->device->dev, 0); return result; } diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index b7c2a06963d6..668137e4a069 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -216,7 +216,7 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state) } if (state) - pm_wakeup_hard_event(&device->dev); + pm_wakeup_event(&device->dev, 0); ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device); if (ret == NOTIFY_DONE) @@ -398,7 +398,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) } else { int keycode; - pm_wakeup_hard_event(&device->dev); + pm_wakeup_event(&device->dev, 0); if (button->suspended) break; @@ -530,7 +530,6 @@ static int acpi_button_add(struct acpi_device *device) lid_device = device; } - device_init_wakeup(&device->dev, true); printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device)); return 0; diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 798d5003a039..993fd31394c8 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -24,7 +24,6 @@ #include #include #include -#include #include "internal.h" @@ -400,7 +399,7 @@ static void acpi_pm_notify_handler(acpi_handle handle, u32 val, void *not_used) mutex_lock(&acpi_pm_notifier_lock); if (adev->wakeup.flags.notifier_present) { - pm_wakeup_ws_event(adev->wakeup.ws, 0, true); + __pm_wakeup_event(adev->wakeup.ws, 0); if (adev->wakeup.context.work.func) queue_pm_work(&adev->wakeup.context.work); } diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index e84005d642e6..a4327af676fe 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -662,40 +662,14 @@ static int acpi_freeze_prepare(void) acpi_os_wait_events_complete(); if (acpi_sci_irq_valid()) enable_irq_wake(acpi_sci_irq); - return 0; } -static void acpi_freeze_wake(void) -{ - /* - * If IRQD_WAKEUP_ARMED is not set for the SCI at this point, it means - * that the SCI has triggered while suspended, so cancel the wakeup in - * case it has not been a wakeup event (the GPEs will be checked later). - */ - if (acpi_sci_irq_valid() && - !irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq))) - pm_system_cancel_wakeup(); -} - -static void acpi_freeze_sync(void) -{ - /* - * Process all pending events in case there are any wakeup ones. - * - * The EC driver uses the system workqueue, so that one needs to be - * flushed too. - */ - acpi_os_wait_events_complete(); - flush_scheduled_work(); -} - static void acpi_freeze_restore(void) { acpi_disable_wakeup_devices(ACPI_STATE_S0); if (acpi_sci_irq_valid()) disable_irq_wake(acpi_sci_irq); - acpi_enable_all_runtime_gpes(); } @@ -707,8 +681,6 @@ static void acpi_freeze_end(void) static const struct platform_freeze_ops acpi_freeze_ops = { .begin = acpi_freeze_begin, .prepare = acpi_freeze_prepare, - .wake = acpi_freeze_wake, - .sync = acpi_freeze_sync, .restore = acpi_freeze_restore, .end = acpi_freeze_end, }; diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index e987a6f55d36..9faee1c893e5 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1091,6 +1091,11 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a if (async_error) goto Complete; + if (pm_wakeup_pending()) { + async_error = -EBUSY; + goto Complete; + } + if (dev->power.syscore || dev->power.direct_complete) goto Complete; diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 9c36b27996fc..c313b600d356 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -28,8 +28,8 @@ bool events_check_enabled __read_mostly; /* First wakeup IRQ seen by the kernel in the last cycle. */ unsigned int pm_wakeup_irq __read_mostly; -/* If greater than 0 and the system is suspending, terminate the suspend. */ -static atomic_t pm_abort_suspend __read_mostly; +/* If set and the system is suspending, terminate the suspend. */ +static bool pm_abort_suspend __read_mostly; /* * Combined counters of registered wakeup events and wakeup events in progress. @@ -855,26 +855,20 @@ bool pm_wakeup_pending(void) pm_print_active_wakeup_sources(); } - return ret || atomic_read(&pm_abort_suspend) > 0; + return ret || pm_abort_suspend; } void pm_system_wakeup(void) { - atomic_inc(&pm_abort_suspend); + pm_abort_suspend = true; freeze_wake(); } EXPORT_SYMBOL_GPL(pm_system_wakeup); -void pm_system_cancel_wakeup(void) -{ - atomic_dec(&pm_abort_suspend); -} - -void pm_wakeup_clear(bool reset) +void pm_wakeup_clear(void) { + pm_abort_suspend = false; pm_wakeup_irq = 0; - if (reset) - atomic_set(&pm_abort_suspend, 0); } void pm_system_irq_wakeup(unsigned int irq_number) diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 0b1cf32edfd7..d9718378a8be 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -189,8 +189,6 @@ struct platform_suspend_ops { struct platform_freeze_ops { int (*begin)(void); int (*prepare)(void); - void (*wake)(void); - void (*sync)(void); void (*restore)(void); void (*end)(void); }; @@ -430,8 +428,7 @@ extern unsigned int pm_wakeup_irq; extern bool pm_wakeup_pending(void); extern void pm_system_wakeup(void); -extern void pm_system_cancel_wakeup(void); -extern void pm_wakeup_clear(bool reset); +extern void pm_wakeup_clear(void); extern void pm_system_irq_wakeup(unsigned int irq_number); extern bool pm_get_wakeup_count(unsigned int *count, bool block); extern bool pm_save_wakeup_count(unsigned int count); @@ -481,7 +478,7 @@ static inline int unregister_pm_notifier(struct notifier_block *nb) static inline bool pm_wakeup_pending(void) { return false; } static inline void pm_system_wakeup(void) {} -static inline void pm_wakeup_clear(bool reset) {} +static inline void pm_wakeup_clear(void) {} static inline void pm_system_irq_wakeup(unsigned int irq_number) {} static inline void lock_system_sleep(void) {} diff --git a/kernel/power/process.c b/kernel/power/process.c index 78672d324a6e..c7209f060eeb 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -132,7 +132,7 @@ int freeze_processes(void) if (!pm_freezing) atomic_inc(&system_freezing_cnt); - pm_wakeup_clear(true); + pm_wakeup_clear(); pr_info("Freezing user space processes ... "); pm_freezing = true; error = try_to_freeze_tasks(true); diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index c0248c74d6d4..15e6baef5c73 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -72,8 +72,6 @@ static void freeze_begin(void) static void freeze_enter(void) { - trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_FREEZE, true); - spin_lock_irq(&suspend_freeze_lock); if (pm_wakeup_pending()) goto out; @@ -100,27 +98,6 @@ static void freeze_enter(void) out: suspend_freeze_state = FREEZE_STATE_NONE; spin_unlock_irq(&suspend_freeze_lock); - - trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_FREEZE, false); -} - -static void s2idle_loop(void) -{ - do { - freeze_enter(); - - if (freeze_ops && freeze_ops->wake) - freeze_ops->wake(); - - dpm_resume_noirq(PMSG_RESUME); - if (freeze_ops && freeze_ops->sync) - freeze_ops->sync(); - - if (pm_wakeup_pending()) - break; - - pm_wakeup_clear(false); - } while (!dpm_suspend_noirq(PMSG_SUSPEND)); } void freeze_wake(void) @@ -394,8 +371,10 @@ static int suspend_enter(suspend_state_t state, bool *wakeup) * all the devices are suspended. */ if (state == PM_SUSPEND_FREEZE) { - s2idle_loop(); - goto Platform_early_resume; + trace_suspend_resume(TPS("machine_suspend"), state, true); + freeze_enter(); + trace_suspend_resume(TPS("machine_suspend"), state, false); + goto Platform_wake; } error = disable_nonboot_cpus(); From 151d1d752bb681f29898c68c966f6e17b446456c Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Mon, 22 May 2017 15:30:21 +0200 Subject: [PATCH 0524/1065] MAINTAINERS: EP93XX: Update maintainership As agreed with Ryan, change the maintainership. Signed-off-by: Alexander Sverdlin Acked-by: Ryan Mallon Acked-by: H Hartley Sweeten Signed-off-by: Olof Johansson --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6df2afb5585e..2edcff83e0eb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1172,7 +1172,7 @@ N: clps711x ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE M: Hartley Sweeten -M: Ryan Mallon +M: Alexander Sverdlin L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-ep93xx/ From b81f884a547b5c264c13fdfaa3b65cf994bf1dcf Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 1 Jun 2017 14:57:56 +0800 Subject: [PATCH 0525/1065] xfrm: fix xfrm_dev_event() missing when compile without CONFIG_XFRM_OFFLOAD In commit d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") we make xfrm_device.o only compiled when enable option CONFIG_XFRM_OFFLOAD. But this will make xfrm_dev_event() missing if we only enable default XFRM options. Then if we set down and unregister an interface with IPsec on it. there will no xfrm_garbage_collect(), which will cause dev usage count hold and get error like: unregister_netdevice: waiting for to become free. Usage count = 4 Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Hangbin Liu Signed-off-by: Steffen Klassert --- include/net/xfrm.h | 7 ++----- net/xfrm/Makefile | 3 +-- net/xfrm/xfrm_device.c | 2 ++ 3 files changed, 5 insertions(+), 7 deletions(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 7e7e2b0d2915..62f5a259e597 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1850,8 +1850,9 @@ static inline struct xfrm_offload *xfrm_offload(struct sk_buff *skb) } #endif -#ifdef CONFIG_XFRM_OFFLOAD void __net_init xfrm_dev_init(void); + +#ifdef CONFIG_XFRM_OFFLOAD int validate_xmit_xfrm(struct sk_buff *skb, netdev_features_t features); int xfrm_dev_state_add(struct net *net, struct xfrm_state *x, struct xfrm_user_offload *xuo); @@ -1877,10 +1878,6 @@ static inline void xfrm_dev_state_free(struct xfrm_state *x) } } #else -static inline void __net_init xfrm_dev_init(void) -{ -} - static inline int validate_xmit_xfrm(struct sk_buff *skb, netdev_features_t features) { return 0; diff --git a/net/xfrm/Makefile b/net/xfrm/Makefile index abf81b329dc1..55b2ac300995 100644 --- a/net/xfrm/Makefile +++ b/net/xfrm/Makefile @@ -4,8 +4,7 @@ obj-$(CONFIG_XFRM) := xfrm_policy.o xfrm_state.o xfrm_hash.o \ xfrm_input.o xfrm_output.o \ - xfrm_sysctl.o xfrm_replay.o -obj-$(CONFIG_XFRM_OFFLOAD) += xfrm_device.o + xfrm_sysctl.o xfrm_replay.o xfrm_device.o obj-$(CONFIG_XFRM_STATISTICS) += xfrm_proc.o obj-$(CONFIG_XFRM_ALGO) += xfrm_algo.o obj-$(CONFIG_XFRM_USER) += xfrm_user.o diff --git a/net/xfrm/xfrm_device.c b/net/xfrm/xfrm_device.c index 574e6f32f94f..5aba03685d7d 100644 --- a/net/xfrm/xfrm_device.c +++ b/net/xfrm/xfrm_device.c @@ -22,6 +22,7 @@ #include #include +#ifdef CONFIG_XFRM_OFFLOAD int validate_xmit_xfrm(struct sk_buff *skb, netdev_features_t features) { int err; @@ -137,6 +138,7 @@ ok: return true; } EXPORT_SYMBOL_GPL(xfrm_dev_offload_ok); +#endif int xfrm_dev_register(struct net_device *dev) { From d11662f4f798b50d8c8743f433842c3e40fe3378 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 2 Jun 2017 15:03:38 +0200 Subject: [PATCH 0526/1065] ALSA: timer: Fix race between read and ioctl The read from ALSA timer device, the function snd_timer_user_tread(), may access to an uninitialized struct snd_timer_user fields when the read is concurrently performed while the ioctl like snd_timer_user_tselect() is invoked. We have already fixed the races among ioctls via a mutex, but we seem to have forgotten the race between read vs ioctl. This patch simply applies (more exactly extends the already applied range of) tu->ioctl_lock in snd_timer_user_tread() for closing the race window. Reported-by: Alexander Potapenko Tested-by: Alexander Potapenko Cc: Signed-off-by: Takashi Iwai --- sound/core/timer.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/core/timer.c b/sound/core/timer.c index 2f836ca09860..1118bd8e2d3c 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1959,6 +1959,7 @@ static ssize_t snd_timer_user_read(struct file *file, char __user *buffer, tu = file->private_data; unit = tu->tread ? sizeof(struct snd_timer_tread) : sizeof(struct snd_timer_read); + mutex_lock(&tu->ioctl_lock); spin_lock_irq(&tu->qlock); while ((long)count - result >= unit) { while (!tu->qused) { @@ -1974,7 +1975,9 @@ static ssize_t snd_timer_user_read(struct file *file, char __user *buffer, add_wait_queue(&tu->qchange_sleep, &wait); spin_unlock_irq(&tu->qlock); + mutex_unlock(&tu->ioctl_lock); schedule(); + mutex_lock(&tu->ioctl_lock); spin_lock_irq(&tu->qlock); remove_wait_queue(&tu->qchange_sleep, &wait); @@ -1994,7 +1997,6 @@ static ssize_t snd_timer_user_read(struct file *file, char __user *buffer, tu->qused--; spin_unlock_irq(&tu->qlock); - mutex_lock(&tu->ioctl_lock); if (tu->tread) { if (copy_to_user(buffer, &tu->tqueue[qhead], sizeof(struct snd_timer_tread))) @@ -2004,7 +2006,6 @@ static ssize_t snd_timer_user_read(struct file *file, char __user *buffer, sizeof(struct snd_timer_read))) err = -EFAULT; } - mutex_unlock(&tu->ioctl_lock); spin_lock_irq(&tu->qlock); if (err < 0) @@ -2014,6 +2015,7 @@ static ssize_t snd_timer_user_read(struct file *file, char __user *buffer, } _error: spin_unlock_irq(&tu->qlock); + mutex_unlock(&tu->ioctl_lock); return result > 0 ? result : err; } From ba3021b2c79b2fa9114f92790a99deb27a65b728 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 2 Jun 2017 17:26:56 +0200 Subject: [PATCH 0527/1065] ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT snd_timer_user_tselect() reallocates the queue buffer dynamically, but it forgot to reset its indices. Since the read may happen concurrently with ioctl and snd_timer_user_tselect() allocates the buffer via kmalloc(), this may lead to the leak of uninitialized kernel-space data, as spotted via KMSAN: BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10 CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007 kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086 copy_to_user ./arch/x86/include/asm/uaccess.h:725 snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004 do_loop_readv_writev fs/read_write.c:716 __do_readv_writev+0x94c/0x1380 fs/read_write.c:864 do_readv_writev fs/read_write.c:894 vfs_readv fs/read_write.c:908 do_readv+0x52a/0x5d0 fs/read_write.c:934 SYSC_readv+0xb6/0xd0 fs/read_write.c:1021 SyS_readv+0x87/0xb0 fs/read_write.c:1018 This patch adds the missing reset of queue indices. Together with the previous fix for the ioctl/read race, we cover the whole problem. Reported-by: Alexander Potapenko Tested-by: Alexander Potapenko Cc: Signed-off-by: Takashi Iwai --- sound/core/timer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/core/timer.c b/sound/core/timer.c index 1118bd8e2d3c..cd67d1c12cf1 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1618,6 +1618,7 @@ static int snd_timer_user_tselect(struct file *file, if (err < 0) goto __err; + tu->qhead = tu->qtail = tu->qused = 0; kfree(tu->queue); tu->queue = NULL; kfree(tu->tqueue); From 82654b6b8ef8b93ee87a97fc562f87f081fc2f91 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 2 Jun 2017 16:32:08 +0800 Subject: [PATCH 0528/1065] nvme: fix hang in remove path We need to start admin queues too in nvme_kill_queues() for avoiding hang in remove path[1]. This patch is very similar with 806f026f9b901eaf(nvme: use blk_mq_start_hw_queues() in nvme_kill_queues()). [1] hang stack trace [] blk_execute_rq+0x56/0x80 [] __nvme_submit_sync_cmd+0x89/0xf0 [] nvme_set_features+0x5e/0x90 [] nvme_configure_apst+0x166/0x200 [] nvme_set_latency_tolerance+0x35/0x50 [] apply_constraint+0xb1/0xc0 [] dev_pm_qos_constraints_destroy+0xf4/0x1f0 [] dpm_sysfs_remove+0x2a/0x60 [] device_del+0x101/0x320 [] device_unregister+0x1a/0x60 [] device_destroy+0x3c/0x50 [] nvme_uninit_ctrl+0x45/0xa0 [] nvme_remove+0x78/0x110 [] pci_device_remove+0x39/0xb0 [] device_release_driver_internal+0x155/0x210 [] device_release_driver+0x12/0x20 [] nvme_remove_dead_ctrl_work+0x6b/0x70 [] process_one_work+0x18c/0x3a0 [] worker_thread+0x4e/0x3b0 [] kthread+0x109/0x140 [] ret_from_fork+0x2c/0x40 [] 0xffffffffffffffff Fixes: c5552fde102fc("nvme: Enable autonomous power state transitions") Reported-by: Rakesh Pandit Tested-by: Rakesh Pandit Reviewed-by: Sagi Grimberg Signed-off-by: Ming Lei Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index a60926410438..0f9cc0c55e15 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2438,6 +2438,10 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl) struct nvme_ns *ns; mutex_lock(&ctrl->namespaces_mutex); + + /* Forcibly start all queues to avoid having stuck requests */ + blk_mq_start_hw_queues(ctrl->admin_q); + list_for_each_entry(ns, &ctrl->namespaces, list) { /* * Revalidating a dead namespace sets capacity to 0. This will From 82b057caefaff2a891f821a617d939f46e03e844 Mon Sep 17 00:00:00 2001 From: Rakesh Pandit Date: Mon, 5 Jun 2017 14:43:11 +0300 Subject: [PATCH 0529/1065] nvme-pci: fix multiple ctrl removal scheduling Commit c5f6ce97c1210 tries to address multiple resets but fails as work_busy doesn't involve any synchronization and can fail. This is reproducible easily as can be seen by WARNING below which is triggered with line: WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING) Allowing multiple resets can result in multiple controller removal as well if different conditions inside nvme_reset_work fail and which might deadlock on device_release_driver. [ 480.327007] WARNING: CPU: 3 PID: 150 at drivers/nvme/host/pci.c:1900 nvme_reset_work+0x36c/0xec0 [ 480.327008] Modules linked in: rfcomm fuse nf_conntrack_netbios_ns nf_conntrack_broadcast... [ 480.327044] btusb videobuf2_core ghash_clmulni_intel snd_hwdep cfg80211 acer_wmi hci_uart.. [ 480.327065] CPU: 3 PID: 150 Comm: kworker/u16:2 Not tainted 4.12.0-rc1+ #13 [ 480.327065] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016 [ 480.327066] Workqueue: nvme nvme_reset_work [ 480.327067] task: ffff880498ad8000 task.stack: ffffc90002218000 [ 480.327068] RIP: 0010:nvme_reset_work+0x36c/0xec0 [ 480.327069] RSP: 0018:ffffc9000221bdb8 EFLAGS: 00010246 [ 480.327070] RAX: 0000000000460000 RBX: ffff880498a98128 RCX: dead000000000200 [ 480.327070] RDX: 0000000000000001 RSI: ffff8804b1028020 RDI: ffff880498a98128 [ 480.327071] RBP: ffffc9000221be50 R08: 0000000000000000 R09: 0000000000000000 [ 480.327071] R10: ffffc90001963ce8 R11: 000000000000020d R12: ffff880498a98000 [ 480.327072] R13: ffff880498a53500 R14: ffff880498a98130 R15: ffff880498a98128 [ 480.327072] FS: 0000000000000000(0000) GS:ffff8804c1cc0000(0000) knlGS:0000000000000000 [ 480.327073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 480.327074] CR2: 00007ffcf3c37f78 CR3: 0000000001e09000 CR4: 00000000003406e0 [ 480.327074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 480.327075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 480.327075] Call Trace: [ 480.327079] ? __switch_to+0x227/0x400 [ 480.327081] process_one_work+0x18c/0x3a0 [ 480.327082] worker_thread+0x4e/0x3b0 [ 480.327084] kthread+0x109/0x140 [ 480.327085] ? process_one_work+0x3a0/0x3a0 [ 480.327087] ? kthread_park+0x60/0x60 [ 480.327102] ret_from_fork+0x2c/0x40 [ 480.327103] Code: e8 5a dc ff ff 85 c0 41 89 c1 0f..... This patch addresses the problem by using state of controller to decide whether reset should be queued or not as state change is synchronizated using controller spinlock. Also cancel_work_sync is used to make sure remove cancels the reset_work and waits for it to finish. This patch also changes return value from -ENODEV to more appropriate -EBUSY if nvme_reset fails to change state. Fixes: c5f6ce97c1210 ("nvme: don't schedule multiple resets") Signed-off-by: Rakesh Pandit Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index d52701df7245..951042a375d6 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1367,7 +1367,7 @@ static bool nvme_should_reset(struct nvme_dev *dev, u32 csts) bool nssro = dev->subsystem && (csts & NVME_CSTS_NSSRO); /* If there is a reset ongoing, we shouldn't reset again. */ - if (work_busy(&dev->reset_work)) + if (dev->ctrl.state == NVME_CTRL_RESETTING) return false; /* We shouldn't reset unless the controller is on fatal error state @@ -1903,7 +1903,7 @@ static void nvme_reset_work(struct work_struct *work) bool was_suspend = !!(dev->ctrl.ctrl_config & NVME_CC_SHN_NORMAL); int result = -ENODEV; - if (WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)) + if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)) goto out; /* @@ -1913,9 +1913,6 @@ static void nvme_reset_work(struct work_struct *work) if (dev->ctrl.ctrl_config & NVME_CC_ENABLE) nvme_dev_disable(dev, false); - if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING)) - goto out; - result = nvme_pci_enable(dev); if (result) goto out; @@ -2009,8 +2006,8 @@ static int nvme_reset(struct nvme_dev *dev) { if (!dev->ctrl.admin_q || blk_queue_dying(dev->ctrl.admin_q)) return -ENODEV; - if (work_busy(&dev->reset_work)) - return -ENODEV; + if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING)) + return -EBUSY; if (!queue_work(nvme_workq, &dev->reset_work)) return -EBUSY; return 0; @@ -2136,6 +2133,7 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (result) goto release_pools; + nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING); dev_info(dev->ctrl.device, "pci function %s\n", dev_name(&pdev->dev)); queue_work(nvme_workq, &dev->reset_work); @@ -2179,6 +2177,7 @@ static void nvme_remove(struct pci_dev *pdev) nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING); + cancel_work_sync(&dev->reset_work); pci_set_drvdata(pdev, NULL); if (!pci_device_is_present(pdev)) { From e818a5b487fea20494b0e48548c1085634abdc0d Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Mon, 5 Jun 2017 20:35:56 +0300 Subject: [PATCH 0530/1065] nvme-rdma: fast fail incoming requests while we reconnect When we encounter an transport/controller errors, error recovery kicks in which performs: 1. stops io/admin queues 2. moves transport queues out of LIVE state 3. fast fail pending io 4. schedule periodic reconnects. But we also need to fast fail incoming IO taht enters after we already scheduled. Given that our queue is not LIVE anymore, simply restart the request queues to fail in .queue_rq Reported-by: Alex Turin Reported-by: shahar.salzman Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org --- drivers/nvme/host/rdma.c | 44 ++++++++++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 15 deletions(-) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 28bd255c144d..24397d306d53 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -753,28 +753,26 @@ static void nvme_rdma_reconnect_ctrl_work(struct work_struct *work) if (ret) goto requeue; - blk_mq_start_stopped_hw_queues(ctrl->ctrl.admin_q, true); - ret = nvmf_connect_admin_queue(&ctrl->ctrl); if (ret) - goto stop_admin_q; + goto requeue; set_bit(NVME_RDMA_Q_LIVE, &ctrl->queues[0].flags); ret = nvme_enable_ctrl(&ctrl->ctrl, ctrl->cap); if (ret) - goto stop_admin_q; + goto requeue; nvme_start_keep_alive(&ctrl->ctrl); if (ctrl->queue_count > 1) { ret = nvme_rdma_init_io_queues(ctrl); if (ret) - goto stop_admin_q; + goto requeue; ret = nvme_rdma_connect_io_queues(ctrl); if (ret) - goto stop_admin_q; + goto requeue; } changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE); @@ -782,7 +780,6 @@ static void nvme_rdma_reconnect_ctrl_work(struct work_struct *work) ctrl->ctrl.opts->nr_reconnects = 0; if (ctrl->queue_count > 1) { - nvme_start_queues(&ctrl->ctrl); nvme_queue_scan(&ctrl->ctrl); nvme_queue_async_events(&ctrl->ctrl); } @@ -791,8 +788,6 @@ static void nvme_rdma_reconnect_ctrl_work(struct work_struct *work) return; -stop_admin_q: - blk_mq_stop_hw_queues(ctrl->ctrl.admin_q); requeue: dev_info(ctrl->ctrl.device, "Failed reconnect attempt %d\n", ctrl->ctrl.opts->nr_reconnects); @@ -823,6 +818,13 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work) blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_cancel_request, &ctrl->ctrl); + /* + * queues are not a live anymore, so restart the queues to fail fast + * new IO + */ + blk_mq_start_stopped_hw_queues(ctrl->ctrl.admin_q, true); + nvme_start_queues(&ctrl->ctrl); + nvme_rdma_reconnect_or_remove(ctrl); } @@ -1433,7 +1435,7 @@ nvme_rdma_timeout(struct request *rq, bool reserved) /* * We cannot accept any other command until the Connect command has completed. */ -static inline bool nvme_rdma_queue_is_ready(struct nvme_rdma_queue *queue, +static inline int nvme_rdma_queue_is_ready(struct nvme_rdma_queue *queue, struct request *rq) { if (unlikely(!test_bit(NVME_RDMA_Q_LIVE, &queue->flags))) { @@ -1441,11 +1443,22 @@ static inline bool nvme_rdma_queue_is_ready(struct nvme_rdma_queue *queue, if (!blk_rq_is_passthrough(rq) || cmd->common.opcode != nvme_fabrics_command || - cmd->fabrics.fctype != nvme_fabrics_type_connect) - return false; + cmd->fabrics.fctype != nvme_fabrics_type_connect) { + /* + * reconnecting state means transport disruption, which + * can take a long time and even might fail permanently, + * so we can't let incoming I/O be requeued forever. + * fail it fast to allow upper layers a chance to + * failover. + */ + if (queue->ctrl->ctrl.state == NVME_CTRL_RECONNECTING) + return -EIO; + else + return -EAGAIN; + } } - return true; + return 0; } static int nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, @@ -1463,8 +1476,9 @@ static int nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, WARN_ON_ONCE(rq->tag < 0); - if (!nvme_rdma_queue_is_ready(queue, rq)) - return BLK_MQ_RQ_QUEUE_BUSY; + ret = nvme_rdma_queue_is_ready(queue, rq); + if (unlikely(ret)) + goto err; dev = queue->device->dev; ib_dma_sync_single_for_cpu(dev, sqe->dma, From f874d5d079ec35158fa1a1509554c9d641bd5770 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 1 Jun 2017 22:54:21 -0700 Subject: [PATCH 0531/1065] nvme-fc: on lldd/transport io error, terminate association Per FC-NVME, when lldd or transport detects an i/o error, the connection must be terminated, which in turn requires the association to be termianted. Currently the transport simply creates a nvme completion status of transport error and returns the io. The FC-NVME spec makes the mandate as initiator and host, depending on the error, can get out of sync on outstanding io counts (sqhd/sqtail). Implement the association teardown on lldd or transport detected errors. Signed-off-by: James Smart Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg --- drivers/nvme/host/fc.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 5b14cbefb724..2edae54688e8 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -1139,6 +1139,7 @@ nvme_fc_xmt_disconnect_assoc(struct nvme_fc_ctrl *ctrl) /* *********************** NVME Ctrl Routines **************************** */ static void __nvme_fc_final_op_cleanup(struct request *rq); +static void nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg); static int nvme_fc_reinit_request(void *data, struct request *rq) @@ -1265,7 +1266,7 @@ nvme_fc_fcpio_done(struct nvmefc_fcp_req *req) struct nvme_command *sqe = &op->cmd_iu.sqe; __le16 status = cpu_to_le16(NVME_SC_SUCCESS << 1); union nvme_result result; - bool complete_rq; + bool complete_rq, terminate_assoc = true; /* * WARNING: @@ -1294,6 +1295,14 @@ nvme_fc_fcpio_done(struct nvmefc_fcp_req *req) * fabricate a CQE, the following fields will not be set as they * are not referenced: * cqe.sqid, cqe.sqhd, cqe.command_id + * + * Failure or error of an individual i/o, in a transport + * detected fashion unrelated to the nvme completion status, + * potentially cause the initiator and target sides to get out + * of sync on SQ head/tail (aka outstanding io count allowed). + * Per FC-NVME spec, failure of an individual command requires + * the connection to be terminated, which in turn requires the + * association to be terminated. */ fc_dma_sync_single_for_cpu(ctrl->lport->dev, op->fcp_req.rspdma, @@ -1359,6 +1368,8 @@ nvme_fc_fcpio_done(struct nvmefc_fcp_req *req) goto done; } + terminate_assoc = false; + done: if (op->flags & FCOP_FLAGS_AEN) { nvme_complete_async_event(&queue->ctrl->ctrl, status, &result); @@ -1366,7 +1377,7 @@ done: atomic_set(&op->state, FCPOP_STATE_IDLE); op->flags = FCOP_FLAGS_AEN; /* clear other flags */ nvme_fc_ctrl_put(ctrl); - return; + goto check_error; } complete_rq = __nvme_fc_fcpop_chk_teardowns(ctrl, op); @@ -1379,6 +1390,10 @@ done: nvme_end_request(rq, status, result); } else __nvme_fc_final_op_cleanup(rq); + +check_error: + if (terminate_assoc) + nvme_fc_error_recovery(ctrl, "transport detected io error"); } static int From 24b7f0592f738a1127c72dbf5b72a83997dd6997 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 5 Jun 2017 15:03:42 -0700 Subject: [PATCH 0532/1065] nvme-fc: fix missing put reference on controller create failure The failure case, of a create controller request, called nvme_uninit_ctrl() but didn't do a put to allow the nvme controller to be deleted. Signed-off-by: James Smart Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 2edae54688e8..92964cef0f4b 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2806,6 +2806,7 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, ctrl->ctrl.opts = NULL; /* initiate nvme ctrl ref counting teardown */ nvme_uninit_ctrl(&ctrl->ctrl); + nvme_put_ctrl(&ctrl->ctrl); /* as we're past the point where we transition to the ref * counting teardown path, if we return a bad pointer here, From da87591bea92204fcb921bac927666eb7141908e Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 7 Jun 2017 15:25:42 +0800 Subject: [PATCH 0533/1065] nvme: only consider exit latency when choosing useful non-op power states When a NVMe is in non-op states, the latency is exlat. The latency will be enlat + exlat only when the NVMe tries to transit from operational state right atfer it begins to transit to non-operational state, which should be a rare case. Therefore, as Andy Lutomirski suggests, use exlat only when deciding power states to trainsit to. Signed-off-by: Kai-Heng Feng Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 0f9cc0c55e15..c07d8d4e18c9 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1342,7 +1342,7 @@ static void nvme_configure_apst(struct nvme_ctrl *ctrl) * transitioning between power states. Therefore, when running * in any given state, we will enter the next lower-power * non-operational state after waiting 50 * (enlat + exlat) - * microseconds, as long as that state's total latency is under + * microseconds, as long as that state's exit latency is under * the requested maximum latency. * * We will not autonomously enter any non-operational state for @@ -1387,7 +1387,7 @@ static void nvme_configure_apst(struct nvme_ctrl *ctrl) * lowest-power state, not the number of states. */ for (state = (int)ctrl->npss; state >= 0; state--) { - u64 total_latency_us, transition_ms; + u64 total_latency_us, exit_latency_us, transition_ms; if (target) table->entries[state] = target; @@ -1408,12 +1408,15 @@ static void nvme_configure_apst(struct nvme_ctrl *ctrl) NVME_PS_FLAGS_NON_OP_STATE)) continue; - total_latency_us = - (u64)le32_to_cpu(ctrl->psd[state].entry_lat) + - + le32_to_cpu(ctrl->psd[state].exit_lat); - if (total_latency_us > ctrl->ps_max_latency_us) + exit_latency_us = + (u64)le32_to_cpu(ctrl->psd[state].exit_lat); + if (exit_latency_us > ctrl->ps_max_latency_us) continue; + total_latency_us = + exit_latency_us + + le32_to_cpu(ctrl->psd[state].entry_lat); + /* * This state is good. Use it as the APST idle * target for higher power states. From 9947d6a09cd71937dade2fc14640e4843ae19802 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 7 Jun 2017 15:25:43 +0800 Subject: [PATCH 0534/1065] nvme: relax APST default max latency to 100ms Christoph Hellwig suggests we should to make APST work out of the box. Hence relax the the default max latency to make them able to enter deepest power state on default. Here are id-ctrl excerpts from two high latency NVMes: vid : 0x14a4 ssvid : 0x1b4b mn : CX2-GB1024-Q11 NVMe LITEON 1024GB ps 3 : mp:0.1000W non-operational enlat:5000 exlat:5000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0100W non-operational enlat:50000 exlat:100000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- vid : 0x15b7 ssvid : 0x1b4b mn : A400 NVMe SanDisk 512GB ps 3 : mp:0.0500W non-operational enlat:51000 exlat:10000 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 4 : mp:0.0055W non-operational enlat:1000000 exlat:100000 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- Signed-off-by: Kai-Heng Feng Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index c07d8d4e18c9..903d5813023a 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -56,7 +56,7 @@ MODULE_PARM_DESC(max_retries, "max number of retries a command may have"); static int nvme_char_major; module_param(nvme_char_major, int, 0); -static unsigned long default_ps_max_latency_us = 25000; +static unsigned long default_ps_max_latency_us = 100000; module_param(default_ps_max_latency_us, ulong, 0644); MODULE_PARM_DESC(default_ps_max_latency_us, "max power saving latency for new devices; use PM QOS to change per device"); From 753c09b5652bb4fe53e2db648002ec64b32b8827 Mon Sep 17 00:00:00 2001 From: Julien Grall Date: Wed, 31 May 2017 14:03:57 +0100 Subject: [PATCH 0535/1065] xen/privcmd: Support correctly 64KB page granularity when mapping memory Commit 5995a68 "xen/privcmd: Add support for Linux 64KB page granularity" did not go far enough to support 64KB in mmap_batch_fn. The variable 'nr' is the number of 4KB chunk to map. However, when Linux is using 64KB page granularity the array of pages (vma->vm_private_data) contain one page per 64KB. Fix it by incrementing st->index correctly. Furthermore, st->va is not correctly incremented as PAGE_SIZE != XEN_PAGE_SIZE. Fixes: 5995a68 ("xen/privcmd: Add support for Linux 64KB page granularity") CC: stable@vger.kernel.org Reported-by: Feng Kan Signed-off-by: Julien Grall Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross --- drivers/xen/privcmd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 7a92a5e1d40c..feca75b07fdd 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -362,8 +362,8 @@ static int mmap_batch_fn(void *data, int nr, void *state) st->global_error = 1; } } - st->va += PAGE_SIZE * nr; - st->index += nr; + st->va += XEN_PAGE_SIZE * nr; + st->index += nr / XEN_PFN_PER_PAGE; return 0; } From d86b18a06cf361e12ccdf61ae240d432182d8d6b Mon Sep 17 00:00:00 2001 From: Jon Bloomfield Date: Wed, 24 May 2017 08:54:11 -0700 Subject: [PATCH 0536/1065] drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT [Note: This will cause a performance penalty for some use cases, but avoiding hangs trumps performance hits. This may need to be worked around in Mesa to recover the lost performance.] v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield Cc: John Harrison Cc: Chris Wilson Cc: Daniel Vetter Cc: Tvrtko Ursulin Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin Signed-off-by: Chris Wilson (cherry picked from commit 0ef34ad6222abfa513117515fec720c33a58f105) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 10 +++ drivers/gpu/drm/i915/i915_gem_gtt.c | 103 ++++++++++++++++++++++++++++ 2 files changed, 113 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 963f6d4481f7..2c453a4e97d5 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2991,6 +2991,16 @@ static inline bool intel_scanout_needs_vtd_wa(struct drm_i915_private *dev_priv) return false; } +static inline bool +intel_ggtt_update_needs_vtd_wa(struct drm_i915_private *dev_priv) +{ +#ifdef CONFIG_INTEL_IOMMU + if (IS_BROXTON(dev_priv) && intel_iommu_gfx_mapped) + return true; +#endif + return false; +} + int intel_sanitize_enable_ppgtt(struct drm_i915_private *dev_priv, int enable_ppgtt); diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 50b8f1139ff9..db89843bdd46 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -2191,6 +2191,101 @@ static void gen8_ggtt_clear_range(struct i915_address_space *vm, gen8_set_pte(>t_base[i], scratch_pte); } +static void bxt_vtd_ggtt_wa(struct i915_address_space *vm) +{ + struct drm_i915_private *dev_priv = vm->i915; + + /* + * Make sure the internal GAM fifo has been cleared of all GTT + * writes before exiting stop_machine(). This guarantees that + * any aperture accesses waiting to start in another process + * cannot back up behind the GTT writes causing a hang. + * The register can be any arbitrary GAM register. + */ + POSTING_READ(GFX_FLSH_CNTL_GEN6); +} + +struct insert_page { + struct i915_address_space *vm; + dma_addr_t addr; + u64 offset; + enum i915_cache_level level; +}; + +static int bxt_vtd_ggtt_insert_page__cb(void *_arg) +{ + struct insert_page *arg = _arg; + + gen8_ggtt_insert_page(arg->vm, arg->addr, arg->offset, arg->level, 0); + bxt_vtd_ggtt_wa(arg->vm); + + return 0; +} + +static void bxt_vtd_ggtt_insert_page__BKL(struct i915_address_space *vm, + dma_addr_t addr, + u64 offset, + enum i915_cache_level level, + u32 unused) +{ + struct insert_page arg = { vm, addr, offset, level }; + + stop_machine(bxt_vtd_ggtt_insert_page__cb, &arg, NULL); +} + +struct insert_entries { + struct i915_address_space *vm; + struct sg_table *st; + u64 start; + enum i915_cache_level level; +}; + +static int bxt_vtd_ggtt_insert_entries__cb(void *_arg) +{ + struct insert_entries *arg = _arg; + + gen8_ggtt_insert_entries(arg->vm, arg->st, arg->start, arg->level, 0); + bxt_vtd_ggtt_wa(arg->vm); + + return 0; +} + +static void bxt_vtd_ggtt_insert_entries__BKL(struct i915_address_space *vm, + struct sg_table *st, + u64 start, + enum i915_cache_level level, + u32 unused) +{ + struct insert_entries arg = { vm, st, start, level }; + + stop_machine(bxt_vtd_ggtt_insert_entries__cb, &arg, NULL); +} + +struct clear_range { + struct i915_address_space *vm; + u64 start; + u64 length; +}; + +static int bxt_vtd_ggtt_clear_range__cb(void *_arg) +{ + struct clear_range *arg = _arg; + + gen8_ggtt_clear_range(arg->vm, arg->start, arg->length); + bxt_vtd_ggtt_wa(arg->vm); + + return 0; +} + +static void bxt_vtd_ggtt_clear_range__BKL(struct i915_address_space *vm, + u64 start, + u64 length) +{ + struct clear_range arg = { vm, start, length }; + + stop_machine(bxt_vtd_ggtt_clear_range__cb, &arg, NULL); +} + static void gen6_ggtt_clear_range(struct i915_address_space *vm, u64 start, u64 length) { @@ -2785,6 +2880,14 @@ static int gen8_gmch_probe(struct i915_ggtt *ggtt) ggtt->base.insert_entries = gen8_ggtt_insert_entries; + /* Serialize GTT updates with aperture access on BXT if VT-d is on. */ + if (intel_ggtt_update_needs_vtd_wa(dev_priv)) { + ggtt->base.insert_entries = bxt_vtd_ggtt_insert_entries__BKL; + ggtt->base.insert_page = bxt_vtd_ggtt_insert_page__BKL; + if (ggtt->base.clear_range != nop_clear_range) + ggtt->base.clear_range = bxt_vtd_ggtt_clear_range__BKL; + } + ggtt->invalidate = gen6_ggtt_invalidate; return ggtt_probe_common(ggtt, size); From ee9c4e681ec4f58e42a83cb0c22a0289ade1aacf Mon Sep 17 00:00:00 2001 From: Vladis Dronov Date: Fri, 2 Jun 2017 07:42:09 +0200 Subject: [PATCH 0537/1065] drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl() The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is a user-controlled 'uint32_t' value which is used as a loop count limit. This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'. References: https://bugzilla.redhat.com/show_bug.cgi?id=1437431 Cc: Signed-off-by: Vladis Dronov Reviewed-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index 7681341fe32b..baf03d4d86d2 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -1279,6 +1279,9 @@ int vmw_gb_surface_define_ioctl(struct drm_device *dev, void *data, if (req->multisample_count != 0) return -EINVAL; + if (req->mip_levels > DRM_VMW_MAX_MIP_LEVELS) + return -EINVAL; + if (unlikely(vmw_user_surface_size == 0)) vmw_user_surface_size = ttm_round_pot(sizeof(*user_srf)) + 128; From bbd5fefeea59412af4b4a325c2743f53a1d6c417 Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Fri, 2 Jun 2017 07:44:53 +0200 Subject: [PATCH 0538/1065] drm/vmwgfx: Don't create proxy surface for cursor With atomic, the cursor surface is treated like a FB. Creating a proxy surface for cursor doesn't gain us much benefit. This fixes the issue on atomic enabled 2D VMs where the cursor disappears. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index ef9f3a2a4030..bcb6ddbdf43c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1498,6 +1498,7 @@ vmw_kms_new_framebuffer(struct vmw_private *dev_priv, */ if (vmw_kms_srf_ok(dev_priv, mode_cmd->width, mode_cmd->height) && dmabuf && only_2d && + mode_cmd->width > 64 && /* Don't create a proxy for cursor */ dev_priv->active_display_unit == vmw_du_screen_target) { ret = vmw_create_dmabuf_proxy(dev_priv->dev, mode_cmd, dmabuf, &surface); From f0c62e9878024300319ba2438adc7b06c6b9c448 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 27 Apr 2017 12:12:08 +0300 Subject: [PATCH 0539/1065] drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve() If vmalloc() fails then we need to a bit of cleanup before returning. Cc: Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Signed-off-by: Dan Carpenter Reviewed-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index b6a0806b06bf..a1c68e6a689e 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -368,6 +368,8 @@ static void *vmw_local_fifo_reserve(struct vmw_private *dev_priv, return fifo_state->static_buffer; else { fifo_state->dynamic_buffer = vmalloc(bytes); + if (!fifo_state->dynamic_buffer) + goto out_err; return fifo_state->dynamic_buffer; } } From 07678eca2cf9c9a18584e546c2b2a0d0c9a3150c Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Fri, 2 Jun 2017 07:50:57 +0200 Subject: [PATCH 0540/1065] drm/vmwgfx: Make sure backup_handle is always valid When vmw_gb_surface_define_ioctl() is called with an existing buffer, we end up returning an uninitialized variable in the backup_handle. The fix is to first initialize backup_handle to 0 just to be sure, and second, when a user-provided buffer is found, we will use the req->buffer_handle as the backup_handle. Cc: Reported-by: Murray McAllister Signed-off-by: Sinclair Yeh Reviewed-by: Deepak Rawat --- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index baf03d4d86d2..834bb10973a2 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -1274,7 +1274,7 @@ int vmw_gb_surface_define_ioctl(struct drm_device *dev, void *data, struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; int ret; uint32_t size; - uint32_t backup_handle; + uint32_t backup_handle = 0; if (req->multisample_count != 0) return -EINVAL; @@ -1317,12 +1317,16 @@ int vmw_gb_surface_define_ioctl(struct drm_device *dev, void *data, ret = vmw_user_dmabuf_lookup(tfile, req->buffer_handle, &res->backup, &user_srf->backup_base); - if (ret == 0 && res->backup->base.num_pages * PAGE_SIZE < - res->backup_size) { - DRM_ERROR("Surface backup buffer is too small.\n"); - vmw_dmabuf_unreference(&res->backup); - ret = -EINVAL; - goto out_unlock; + if (ret == 0) { + if (res->backup->base.num_pages * PAGE_SIZE < + res->backup_size) { + DRM_ERROR("Surface backup buffer is too small.\n"); + vmw_dmabuf_unreference(&res->backup); + ret = -EINVAL; + goto out_unlock; + } else { + backup_handle = req->buffer_handle; + } } } else if (req->drm_surface_flags & drm_vmw_surface_flag_create_buffer) ret = vmw_user_dmabuf_alloc(dev_priv, tfile, From 8a309c8a2d0619efe29ec652c163d6b89eff9f9f Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Fri, 2 Jun 2017 07:53:27 +0200 Subject: [PATCH 0541/1065] drm/vmwgfx: Make sure to update STDU when FB is updated When a new FB is bound, we have to send an update command otherwise the new FB may not be shown Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index bad31bdf09b6..60ace30246cf 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -1355,6 +1355,11 @@ vmw_stdu_primary_plane_atomic_update(struct drm_plane *plane, DRM_ERROR("Failed to bind surface to STDU.\n"); else crtc->primary->fb = plane->state->fb; + + ret = vmw_stdu_update_st(dev_priv, stdu); + + if (ret) + DRM_ERROR("Failed to update STDU.\n"); } From a1ac633912305168bf432c3d47979d43b16164f8 Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Fri, 2 Jun 2017 07:55:50 +0200 Subject: [PATCH 0542/1065] drm/vmwgfx: Fix large topology crash The previous attempt at this had an issue with with num_clips > 1 because it would always end up using the coordinates of the last clip while using width and height calculated from the bounding box of all the clips. So if the last clip happens to be not at the top-left corner of the bounding box, the CPU blit operation would go out of bounds. The original intent was to coalesce all the clips into one blit, and to do that we need to also track the starting point of the content buffer. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index 60ace30246cf..50be1f034f9e 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -56,6 +56,8 @@ enum stdu_content_type { * @right: Right side of bounding box. * @top: Top side of bounding box. * @bottom: Bottom side of bounding box. + * @fb_left: Left side of the framebuffer/content bounding box + * @fb_top: Top of the framebuffer/content bounding box * @buf: DMA buffer when DMA-ing between buffer and screen targets. * @sid: Surface ID when copying between surface and screen targets. */ @@ -63,6 +65,7 @@ struct vmw_stdu_dirty { struct vmw_kms_dirty base; SVGA3dTransferType transfer; s32 left, right, top, bottom; + s32 fb_left, fb_top; u32 pitch; union { struct vmw_dma_buffer *buf; @@ -647,7 +650,7 @@ static void vmw_stdu_dmabuf_fifo_commit(struct vmw_kms_dirty *dirty) * * @dirty: The closure structure. * - * This function calculates the bounding box for all the incoming clips + * This function calculates the bounding box for all the incoming clips. */ static void vmw_stdu_dmabuf_cpu_clip(struct vmw_kms_dirty *dirty) { @@ -656,11 +659,19 @@ static void vmw_stdu_dmabuf_cpu_clip(struct vmw_kms_dirty *dirty) dirty->num_hits = 1; - /* Calculate bounding box */ + /* Calculate destination bounding box */ ddirty->left = min_t(s32, ddirty->left, dirty->unit_x1); ddirty->top = min_t(s32, ddirty->top, dirty->unit_y1); ddirty->right = max_t(s32, ddirty->right, dirty->unit_x2); ddirty->bottom = max_t(s32, ddirty->bottom, dirty->unit_y2); + + /* + * Calculate content bounding box. We only need the top-left + * coordinate because width and height will be the same as the + * destination bounding box above + */ + ddirty->fb_left = min_t(s32, ddirty->fb_left, dirty->fb_x); + ddirty->fb_top = min_t(s32, ddirty->fb_top, dirty->fb_y); } @@ -697,11 +708,11 @@ static void vmw_stdu_dmabuf_cpu_commit(struct vmw_kms_dirty *dirty) /* Assume we are blitting from Host (display_srf) to Guest (dmabuf) */ src_pitch = stdu->display_srf->base_size.width * stdu->cpp; src = ttm_kmap_obj_virtual(&stdu->host_map, ¬_used); - src += dirty->unit_y1 * src_pitch + dirty->unit_x1 * stdu->cpp; + src += ddirty->top * src_pitch + ddirty->left * stdu->cpp; dst_pitch = ddirty->pitch; dst = ttm_kmap_obj_virtual(&stdu->guest_map, ¬_used); - dst += dirty->fb_y * dst_pitch + dirty->fb_x * stdu->cpp; + dst += ddirty->fb_top * dst_pitch + ddirty->fb_left * stdu->cpp; /* Figure out the real direction */ @@ -760,7 +771,7 @@ static void vmw_stdu_dmabuf_cpu_commit(struct vmw_kms_dirty *dirty) } out_cleanup: - ddirty->left = ddirty->top = S32_MAX; + ddirty->left = ddirty->top = ddirty->fb_left = ddirty->fb_top = S32_MAX; ddirty->right = ddirty->bottom = S32_MIN; } @@ -812,6 +823,7 @@ int vmw_kms_stdu_dma(struct vmw_private *dev_priv, SVGA3D_READ_HOST_VRAM; ddirty.left = ddirty.top = S32_MAX; ddirty.right = ddirty.bottom = S32_MIN; + ddirty.fb_left = ddirty.fb_top = S32_MAX; ddirty.pitch = vfb->base.pitches[0]; ddirty.buf = buf; ddirty.base.fifo_commit = vmw_stdu_dmabuf_fifo_commit; From a2e5a3e2f8cc48cc9ed10a919ae582ab0222da80 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 27 May 2017 19:52:30 +0100 Subject: [PATCH 0543/1065] drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds" Trivial fix to spelling mistake in DRM_ERROR error message. Signed-off-by: Colin Ian King Reviewed-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index 834bb10973a2..6b70bd259953 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -1498,7 +1498,7 @@ int vmw_surface_gb_priv_define(struct drm_device *dev, dev_priv->stdu_max_height); if (size.width > max_width || size.height > max_height) { - DRM_ERROR("%ux%u\n, exeeds max surface size %ux%u", + DRM_ERROR("%ux%u\n, exceeds max surface size %ux%u", size.width, size.height, max_width, max_height); return -EINVAL; From f470a7740f8c7577df1db5923ec89d890cf32040 Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Wed, 7 Jun 2017 14:24:08 +0200 Subject: [PATCH 0544/1065] drm/vmwgfx: Remove unused legacy cursor functions These function implementations and/or declarations are no longer used now that atomic is enabled. Signed-off-by: Sinclair Yeh Reported-by: Daniel Vetter Reviewed-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 114 ---------------------------- drivers/gpu/drm/vmwgfx/vmwgfx_kms.h | 15 ---- 2 files changed, 129 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index bcb6ddbdf43c..1d2db5d912b0 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -274,108 +274,6 @@ void vmw_kms_cursor_post_execbuf(struct vmw_private *dev_priv) } - -/** - * vmw_du_cursor_plane_update() - Update cursor image and location - * - * @plane: plane object to update - * @crtc: owning CRTC of @plane - * @fb: framebuffer to flip onto plane - * @crtc_x: x offset of plane on crtc - * @crtc_y: y offset of plane on crtc - * @crtc_w: width of plane rectangle on crtc - * @crtc_h: height of plane rectangle on crtc - * @src_x: Not used - * @src_y: Not used - * @src_w: Not used - * @src_h: Not used - * - * - * RETURNS: - * Zero on success, error code on failure - */ -int vmw_du_cursor_plane_update(struct drm_plane *plane, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int crtc_x, int crtc_y, - unsigned int crtc_w, - unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) -{ - struct vmw_private *dev_priv = vmw_priv(crtc->dev); - struct vmw_display_unit *du = vmw_crtc_to_du(crtc); - struct vmw_surface *surface = NULL; - struct vmw_dma_buffer *dmabuf = NULL; - s32 hotspot_x, hotspot_y; - int ret; - - hotspot_x = du->hotspot_x + fb->hot_x; - hotspot_y = du->hotspot_y + fb->hot_y; - - /* A lot of the code assumes this */ - if (crtc_w != 64 || crtc_h != 64) { - ret = -EINVAL; - goto out; - } - - if (vmw_framebuffer_to_vfb(fb)->dmabuf) - dmabuf = vmw_framebuffer_to_vfbd(fb)->buffer; - else - surface = vmw_framebuffer_to_vfbs(fb)->surface; - - if (surface && !surface->snooper.image) { - DRM_ERROR("surface not suitable for cursor\n"); - ret = -EINVAL; - goto out; - } - - /* setup new image */ - ret = 0; - if (surface) { - /* vmw_user_surface_lookup takes one reference */ - du->cursor_surface = surface; - - du->cursor_age = du->cursor_surface->snooper.age; - - ret = vmw_cursor_update_image(dev_priv, surface->snooper.image, - 64, 64, hotspot_x, hotspot_y); - } else if (dmabuf) { - /* vmw_user_surface_lookup takes one reference */ - du->cursor_dmabuf = dmabuf; - - ret = vmw_cursor_update_dmabuf(dev_priv, dmabuf, crtc_w, crtc_h, - hotspot_x, hotspot_y); - } else { - vmw_cursor_update_position(dev_priv, false, 0, 0); - goto out; - } - - if (!ret) { - du->cursor_x = crtc_x + du->set_gui_x; - du->cursor_y = crtc_y + du->set_gui_y; - - vmw_cursor_update_position(dev_priv, true, - du->cursor_x + hotspot_x, - du->cursor_y + hotspot_y); - } - -out: - return ret; -} - - -int vmw_du_cursor_plane_disable(struct drm_plane *plane) -{ - if (plane->fb) { - drm_framebuffer_unreference(plane->fb); - plane->fb = NULL; - } - - return -EINVAL; -} - - void vmw_du_cursor_plane_destroy(struct drm_plane *plane) { vmw_cursor_update_position(plane->dev->dev_private, false, 0, 0); @@ -472,18 +370,6 @@ vmw_du_cursor_plane_prepare_fb(struct drm_plane *plane, } -void -vmw_du_cursor_plane_atomic_disable(struct drm_plane *plane, - struct drm_plane_state *old_state) -{ - struct drm_crtc *crtc = plane->state->crtc ?: old_state->crtc; - struct vmw_private *dev_priv = vmw_priv(crtc->dev); - - drm_atomic_set_fb_for_plane(plane->state, NULL); - vmw_cursor_update_position(dev_priv, false, 0, 0); -} - - void vmw_du_cursor_plane_atomic_update(struct drm_plane *plane, struct drm_plane_state *old_state) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h index 13f2f1d2818a..5f8d678ae675 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h @@ -256,10 +256,6 @@ int vmw_du_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, uint32_t size, struct drm_modeset_acquire_ctx *ctx); -int vmw_du_crtc_cursor_set2(struct drm_crtc *crtc, struct drm_file *file_priv, - uint32_t handle, uint32_t width, uint32_t height, - int32_t hot_x, int32_t hot_y); -int vmw_du_crtc_cursor_move(struct drm_crtc *crtc, int x, int y); int vmw_du_connector_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t val); @@ -339,15 +335,6 @@ void vmw_kms_create_implicit_placement_property(struct vmw_private *dev_priv, /* Universal Plane Helpers */ void vmw_du_primary_plane_destroy(struct drm_plane *plane); void vmw_du_cursor_plane_destroy(struct drm_plane *plane); -int vmw_du_cursor_plane_disable(struct drm_plane *plane); -int vmw_du_cursor_plane_update(struct drm_plane *plane, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int crtc_x, int crtc_y, - unsigned int crtc_w, - unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h); /* Atomic Helpers */ int vmw_du_primary_plane_atomic_check(struct drm_plane *plane, @@ -356,8 +343,6 @@ int vmw_du_cursor_plane_atomic_check(struct drm_plane *plane, struct drm_plane_state *state); void vmw_du_cursor_plane_atomic_update(struct drm_plane *plane, struct drm_plane_state *old_state); -void vmw_du_cursor_plane_atomic_disable(struct drm_plane *plane, - struct drm_plane_state *old_state); int vmw_du_cursor_plane_prepare_fb(struct drm_plane *plane, struct drm_plane_state *new_state); void vmw_du_plane_cleanup_fb(struct drm_plane *plane, From 1929e6610bddf0cc44f0859fc72d4016cba0c1fa Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 7 Jun 2017 14:46:15 +0200 Subject: [PATCH 0545/1065] drm/vmwgfx: Bump driver minor and date While the atomic modesetting capability is signaled also elsewhere, also reflect it by a driver minor bump. Signed-off-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 130d51c5ec6a..4b948fba9eec 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -41,9 +41,9 @@ #include #include "vmwgfx_fence.h" -#define VMWGFX_DRIVER_DATE "20170221" +#define VMWGFX_DRIVER_DATE "20170607" #define VMWGFX_DRIVER_MAJOR 2 -#define VMWGFX_DRIVER_MINOR 12 +#define VMWGFX_DRIVER_MINOR 13 #define VMWGFX_DRIVER_PATCHLEVEL 0 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024) From 4ca9a5821972b431cb94c6a1ac69a64aefe1c17d Mon Sep 17 00:00:00 2001 From: Michal Wajdeczko Date: Thu, 18 May 2017 11:31:02 +0000 Subject: [PATCH 0546/1065] drm/i915/guc: Remove stale comment for q_fail This member was dropped long time ago. Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout") Signed-off-by: Michal Wajdeczko Cc: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson (cherry picked from commit 4afc67be8e203ee8f5e95e829c0777eae7a14702) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_uc.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_uc.h b/drivers/gpu/drm/i915/intel_uc.h index 4b7f73aeddac..f84115261ae7 100644 --- a/drivers/gpu/drm/i915/intel_uc.h +++ b/drivers/gpu/drm/i915/intel_uc.h @@ -59,8 +59,6 @@ struct drm_i915_gem_request; * available in the work queue (note, the queue is shared, * not per-engine). It is OK for this to be nonzero, but * it should not be huge! - * q_fail: failed to enqueue a work item. This should never happen, - * because we check for space beforehand. * b_fail: failed to ring the doorbell. This should never happen, unless * somehow the hardware misbehaves, or maybe if the GuC firmware * crashes? We probably need to reset the GPU to recover. From 4c4c565513cca1c53a12956640b5915727431631 Mon Sep 17 00:00:00 2001 From: Kai Chen Date: Tue, 23 May 2017 14:58:11 -0700 Subject: [PATCH 0547/1065] drm/i915: Disable decoupled MMIO The decoupled MMIO feature doesn't work as intended by HW team. Enabling it with forcewake will only make debugging efforts more difficult, so let's disable it. Fixes: 85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO") Cc: Zhe Wang Cc: Praveen Paneri Cc: Tvrtko Ursulin Cc: Daniel Vetter Cc: Jani Nikula Cc: intel-gfx@lists.freedesktop.org Cc: # v4.10+ Signed-off-by: Kai Chen Reviewed-by: Tvrtko Ursulin Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com (cherry picked from commit 0051c10acabb631cfd439eae73289e6e4c39b2b7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_pci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c index f87b0c4e564d..03dbc7f2861e 100644 --- a/drivers/gpu/drm/i915/i915_pci.c +++ b/drivers/gpu/drm/i915/i915_pci.c @@ -390,7 +390,6 @@ static const struct intel_device_info intel_skylake_gt3_info = { .has_hw_contexts = 1, \ .has_logical_ring_contexts = 1, \ .has_guc = 1, \ - .has_decoupled_mmio = 1, \ .has_aliasing_ppgtt = 1, \ .has_full_ppgtt = 1, \ .has_full_48bit_ppgtt = 1, \ From e0da1963fe84ee86b59dc4b9ff1a69cb4e1275c7 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 30 May 2017 13:13:32 +0100 Subject: [PATCH 0548/1065] drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle If the device is asleep (no GT wakeref), we know the GPU is already idle. If we add an early return, we can avoid touching registers and checking hw state outside of the assumed GT wakelock. This prevents causing such errors whilst debugging: [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 25112b64b3d2 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit 863e9fde1a7061dad09bb299c65bed5f1ccb44ff) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b6ac3df18b58..462031cbd77f 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3298,6 +3298,10 @@ int i915_gem_wait_for_idle(struct drm_i915_private *i915, unsigned int flags) { int ret; + /* If the device is asleep, we have no requests outstanding */ + if (!READ_ONCE(i915->gt.awake)) + return 0; + if (flags & I915_WAIT_LOCKED) { struct i915_gem_timeline *tl; From d9533f19d8401b7072da2d484a9514af0d473148 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 30 May 2017 13:13:33 +0100 Subject: [PATCH 0549/1065] drm/i915: Hold a wakeref for probing the ring registers Allow intel_engine_is_idle() to be called outside of the GT wakeref by acquiring the device runtime pm for ourselves. This allows the function to act as check after we assume the engine is idle and we release the GT wakeref held whilst we have requests. At the moment, we do not call it outside of an awake context but taking the wakeref as required makes it more convenient to use for quick debugging in future. [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 5400367a864d ("drm/i915: Ensure the engine is idle before manually changing HWS") Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: Joonas Lahtinen Cc: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-2-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin (cherry picked from commit a091d4ee931b16ce4fef945d39a20b851a7e17b7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_engine_cs.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c index 854e8e0c836b..9a0fb3cdd4e0 100644 --- a/drivers/gpu/drm/i915/intel_engine_cs.c +++ b/drivers/gpu/drm/i915/intel_engine_cs.c @@ -1075,6 +1075,22 @@ int intel_ring_workarounds_emit(struct drm_i915_gem_request *req) return 0; } +static bool ring_is_idle(struct intel_engine_cs *engine) +{ + struct drm_i915_private *dev_priv = engine->i915; + bool idle = true; + + intel_runtime_pm_get(dev_priv); + + /* No bit for gen2, so assume the CS parser is idle */ + if (INTEL_GEN(dev_priv) > 2 && !(I915_READ_MODE(engine) & MODE_IDLE)) + idle = false; + + intel_runtime_pm_put(dev_priv); + + return idle; +} + /** * intel_engine_is_idle() - Report if the engine has finished process all work * @engine: the intel_engine_cs @@ -1100,7 +1116,7 @@ bool intel_engine_is_idle(struct intel_engine_cs *engine) return false; /* Ring stopped? */ - if (INTEL_GEN(dev_priv) > 2 && !(I915_READ_MODE(engine) & MODE_IDLE)) + if (!ring_is_idle(engine)) return false; return true; From bd709898a50184de4fe418bf85486c5b1e002901 Mon Sep 17 00:00:00 2001 From: "Nagaraju, Vathsala" Date: Thu, 25 May 2017 22:13:29 +0530 Subject: [PATCH 0550/1065] drm/i915/psr: disable psr2 for resolution greater than 32X20 psr1 is also disabled for panel resolution greater than 32X20. Added psr2 check to disable only for psr2 panels having resolution greater than 32X20. issue was introduced by commit-id : "acf45d11050abd751dcec986ab121cb2367dcbba" commit message: "PSR2 is restricted to work with panel resolutions upto 3200x2000, move the check to intel_psr_match_conditions and fully block psr." v2: (Rodrigo) Add previous commit details which introduced the issue Fixes: acf45d11050a ("drm/i915/psr: disable psr2 for resolution greater than 32X20") Cc: Rodrigo Vivi Cc: Jim Bride Cc: Yaroslav Shabalin Reported-by: Yaroslav Shabalin Reviewed-by: Rodrigo Vivi Signed-off-by: vathsala nagaraju Signed-off-by: Rodrigo Vivi Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com (cherry picked from commit bef8c056fba09aa4629fe5a2d3efe64068d049db) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_psr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c index c3780d0d2baf..559f1ab42bfc 100644 --- a/drivers/gpu/drm/i915/intel_psr.c +++ b/drivers/gpu/drm/i915/intel_psr.c @@ -435,8 +435,9 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp) } /* PSR2 is restricted to work with panel resolutions upto 3200x2000 */ - if (intel_crtc->config->pipe_src_w > 3200 || - intel_crtc->config->pipe_src_h > 2000) { + if (dev_priv->psr.psr2_support && + (intel_crtc->config->pipe_src_w > 3200 || + intel_crtc->config->pipe_src_h > 2000)) { dev_priv->psr.psr2_support = false; return false; } From 6ab92afc95c9bd6877cb42e7b24f65be887a5440 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 2 May 2017 15:04:09 +0300 Subject: [PATCH 0551/1065] drm/i915: Prevent the system suspend complete optimization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit bac2a909a096c9110525c18cbb8ce73c660d5f71 Author: Rafael J. Wysocki Date: Wed Jan 21 02:17:42 2015 +0100 PCI / PM: Avoid resuming PCI devices during system suspend PCI devices will default to allowing the system suspend complete optimization where devices are not woken up during system suspend if they were already runtime suspended. This however breaks the i915/HDA drivers for two reasons: - The i915 driver has system suspend specific steps that it needs to run, that bring the device to a different state than its runtime suspended state. - The HDA driver's suspend handler requires power that it will request from the i915 driver's power domain handler. This in turn requires the i915 driver to runtime resume itself, but this won't be possible if the suspend complete optimization is in effect: in this case the i915 runtime PM is disabled and trying to get an RPM reference returns -EACCESS. Solve this by requiring the PCI/PM core to resume the device during system suspend which in effect disables the suspend complete optimization. Regardless of the above commit the optimization stayed disabled for DRM devices until commit d14d2a8453d650bea32a1c5271af1458cd283a0f Author: Lukas Wunner Date: Wed Jun 8 12:49:29 2016 +0200 drm: Remove dev_pm_ops from drm_class so this patch is in practice a fix for this commit. Another reason for the bug staying hidden for so long is that the optimization for a device is disabled if it's disabled for any of its children devices. i915 may have a backlight device as its child which doesn't support runtime PM and so doesn't allow the optimization either. So if this backlight device got registered the bug stayed hidden. Credits to Marta, Tomi and David who enabled pstore logging, that caught one instance of this issue across a suspend/ resume-to-ram and Ville who rememberd that the optimization was enabled for some devices at one point. The first WARN triggered by the problem: [ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746448] pm_runtime_get_sync() failed: -13 [ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_ numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915] [ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G U W 4.11.0-rc5-CI-CI_DRM_334+ #1 [ 6250.746515] Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017 [ 6250.746521] Workqueue: events_unbound async_run_entry_fn [ 6250.746525] Call Trace: [ 6250.746530] dump_stack+0x67/0x92 [ 6250.746536] __warn+0xc6/0xe0 [ 6250.746542] ? pci_restore_standard_config+0x40/0x40 [ 6250.746546] warn_slowpath_fmt+0x46/0x50 [ 6250.746553] ? __pm_runtime_resume+0x56/0x80 [ 6250.746584] intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746610] intel_display_power_get+0x1b/0x40 [i915] [ 6250.746646] i915_audio_component_get_power+0x15/0x20 [i915] [ 6250.746654] snd_hdac_display_power+0xc8/0x110 [snd_hda_core] [ 6250.746661] azx_runtime_resume+0x218/0x280 [snd_hda_intel] [ 6250.746667] pci_pm_runtime_resume+0x76/0xa0 [ 6250.746672] __rpm_callback+0xb4/0x1f0 [ 6250.746677] ? pci_restore_standard_config+0x40/0x40 [ 6250.746682] rpm_callback+0x1f/0x80 [ 6250.746686] ? pci_restore_standard_config+0x40/0x40 [ 6250.746690] rpm_resume+0x4ba/0x740 [ 6250.746698] __pm_runtime_resume+0x49/0x80 [ 6250.746703] pci_pm_suspend+0x57/0x140 [ 6250.746709] dpm_run_callback+0x6f/0x330 [ 6250.746713] ? pci_pm_freeze+0xe0/0xe0 [ 6250.746718] __device_suspend+0xf9/0x370 [ 6250.746724] ? dpm_watchdog_set+0x60/0x60 [ 6250.746730] async_suspend+0x1a/0x90 [ 6250.746735] async_run_entry_fn+0x34/0x160 [ 6250.746741] process_one_work+0x1f2/0x6d0 [ 6250.746749] worker_thread+0x49/0x4a0 [ 6250.746755] kthread+0x107/0x140 [ 6250.746759] ? process_one_work+0x6d0/0x6d0 [ 6250.746763] ? kthread_create_on_node+0x40/0x40 [ 6250.746768] ret_from_fork+0x2e/0x40 [ 6250.746778] ---[ end trace 102a62fd2160f5e6 ]--- v2: - Use the new pci_dev->needs_resume flag, to avoid any overhead during the ->pm_prepare hook. (Rafael) v3: - Update commit message to reference the actual regressing commit. (Lukas) v4: - Rebase on v4 of patch 1/2. Fixes: d14d2a8453d6 ("drm: Remove dev_pm_ops from drm_class") References: https://bugs.freedesktop.org/show_bug.cgi?id=100378 References: https://bugs.freedesktop.org/show_bug.cgi?id=100770 Cc: Rafael J. Wysocki Cc: Marta Lofstedt Cc: David Weinehall Cc: Tomi Sarvela Cc: Ville Syrjälä Cc: Mika Kuoppala Cc: Chris Wilson Cc: Takashi Iwai Cc: Bjorn Helgaas Cc: Lukas Wunner Cc: linux-pci@vger.kernel.org Cc: # v4.10.x: 4d071c3 - PCI/PM: Add needs_resume flag Cc: # v4.10.x Signed-off-by: Imre Deak Reviewed-by: Chris Wilson Reported-and-tested-by: Marta Lofstedt Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com (cherry picked from commit adfdf85d795f4d4f487b61ee0b169d64c6e19081) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index c994fe6e65b2..48428672fc6e 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1235,6 +1235,15 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent) goto out_fini; pci_set_drvdata(pdev, &dev_priv->drm); + /* + * Disable the system suspend direct complete optimization, which can + * leave the device suspended skipping the driver's suspend handlers + * if the device was already runtime suspended. This is needed due to + * the difference in our runtime and system suspend sequence and + * becaue the HDA driver may require us to enable the audio power + * domain during system suspend. + */ + pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME; ret = i915_driver_init_early(dev_priv, ent); if (ret < 0) From 4e3aed844547f63614363a386de126e6304e55fb Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 31 May 2017 17:42:36 +0200 Subject: [PATCH 0552/1065] drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2. On some systems there can be a race condition in which no crtc state is added to the first atomic commit. This results in all crtc's having a null DDB allocation, causing a FIFO underrun on any update until the first modeset. Changes since v1: - Do not take the connection_mutex, this is already done below. Reported-by: Maarten Lankhorst Inspired-by: Mahesh Kumar Signed-off-by: Maarten Lankhorst Fixes: 98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic check time (v4)") Cc: # v4.8+ Cc: Mahesh Kumar Cc: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com Reviewed-by: Mahesh Kumar Reviewed-by: Matt Roper (cherry picked from commit 367d73d2806085bb507ab44c1f532640917fd5ca) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 570bd603f401..2ca481b5aa69 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4335,10 +4335,18 @@ skl_compute_wm(struct drm_atomic_state *state) struct drm_crtc_state *cstate; struct intel_atomic_state *intel_state = to_intel_atomic_state(state); struct skl_wm_values *results = &intel_state->wm_results; + struct drm_device *dev = state->dev; struct skl_pipe_wm *pipe_wm; bool changed = false; int ret, i; + /* + * When we distrust bios wm we always need to recompute to set the + * expected DDB allocations for each CRTC. + */ + if (to_i915(dev)->wm.distrust_bios_wm) + changed = true; + /* * If this transaction isn't actually touching any CRTC's, don't * bother with watermark calculation. Note that if we pass this @@ -4349,6 +4357,7 @@ skl_compute_wm(struct drm_atomic_state *state) */ for_each_new_crtc_in_state(state, crtc, cstate, i) changed = true; + if (!changed) return 0; From d90c98905afd00c15d5d255d845b646a37173ce9 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 31 May 2017 20:05:14 +0100 Subject: [PATCH 0553/1065] drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") added the restoration of the invalidation routine after the GuC was disabled, but missed that the GuC was unconditionally disabled when not used. This then overwrites the invalidate routine for the older chipsets, causing havoc and breaking resume as the most obvious victim. We place the guard inside i915_ggtt_disable_guc() to be backport friendly (the bug was introduced into v4.11) but it would be preferred to be in more control over when this was guard (i.e. do not try and teardown the data structures before we have enabled them). That should be true with the reorganisation of the guc loaders. Reported-by: Ville Syrjälä Signed-off-by: Chris Wilson Fixes: 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Cc: Oscar Mateo Cc: Daniele Ceraolo Spurio Cc: Michal Wajdeczko Cc: Arkadiusz Hiler Cc: # v4.11+ Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry (cherry picked from commit cb60606d835ca8b2f744835116bcabe64ce88849) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index db89843bdd46..f1989b8792dd 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -3100,7 +3100,8 @@ void i915_ggtt_enable_guc(struct drm_i915_private *i915) void i915_ggtt_disable_guc(struct drm_i915_private *i915) { - i915->ggtt.invalidate = gen6_ggtt_invalidate; + if (i915->ggtt.invalidate == guc_ggtt_invalidate) + i915->ggtt.invalidate = gen6_ggtt_invalidate; } void i915_gem_restore_gtt_mappings(struct drm_i915_private *dev_priv) From 5857dbfabc15ae9e17fd5a355c4920b46295ff1f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 21 May 2017 13:40:14 +0100 Subject: [PATCH 0554/1065] drm/i915: Fix logical inversion for gen4 quirking The assertion that we want to make before disabling the pin of the pages for the unknown swizzling quirk is that the quirk is indeed active, and that the quirk is disabled before we do apply it to the pages. Fixes: 2c3a3f44dc13 ("drm/i915: Fix pages pin counting around swizzle quirk") Fixes: 957870f93412 ("drm/i915: Split out i915_gem_object_set_tiling()") Signed-off-by: Chris Wilson Cc: Chris Wilson Cc: Joonas Lahtinen Cc: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk Reviewed-bhy: Joonas Lahtinen (cherry picked from commit 20bb377106af69d16269b1837e9a945b9f508a2e) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_tiling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index a0d6d4317a49..fb5231f98c0d 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -278,7 +278,7 @@ i915_gem_object_set_tiling(struct drm_i915_gem_object *obj, obj->mm.quirked = false; } if (!i915_gem_object_is_tiled(obj)) { - GEM_BUG_ON(!obj->mm.quirked); + GEM_BUG_ON(obj->mm.quirked); __i915_gem_object_pin_pages(obj); obj->mm.quirked = true; } From 8f4d38099b3098eae75f7755e1801931f8141350 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 15 Dec 2016 19:47:34 +0200 Subject: [PATCH 0555/1065] drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: stable@vger.kernel.org Cc: Jonas Aaberg Tested-by: Jonas Aaberg Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com Tested-by: Mika Kahola Reviewed-by: Mika Kahola (cherry picked from commit ec1b4ee2834e66884e5b0d3d465f347ff212e372) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 9 +++++++++ drivers/gpu/drm/i915/intel_sprite.c | 21 +++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3cabe52a4e3b..569717a12723 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -12203,6 +12203,15 @@ static void update_scanline_offset(struct intel_crtc *crtc) * type. For DP ports it behaves like most other platforms, but on HDMI * there's an extra 1 line difference. So we need to add two instead of * one to the value. + * + * On VLV/CHV DSI the scanline counter would appear to increment + * approx. 1/3 of a scanline before start of vblank. Unfortunately + * that means we can't tell whether we're in vblank or not while + * we're on that particular line. We must still set scanline_offset + * to 1 so that the vblank timestamps come out correct when we query + * the scanline counter from within the vblank interrupt handler. + * However if queried just before the start of vblank we'll get an + * answer that's slightly in the future. */ if (IS_GEN2(dev_priv)) { const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode; diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 8c87c717c7cd..e6517edcd16b 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -83,10 +83,13 @@ int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode, */ void intel_pipe_update_start(struct intel_crtc *crtc) { + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode; long timeout = msecs_to_jiffies_timeout(1); int scanline, min, max, vblank_start; wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base); + bool need_vlv_dsi_wa = (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && + intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DSI); DEFINE_WAIT(wait); vblank_start = adjusted_mode->crtc_vblank_start; @@ -139,6 +142,24 @@ void intel_pipe_update_start(struct intel_crtc *crtc) drm_crtc_vblank_put(&crtc->base); + /* + * On VLV/CHV DSI the scanline counter would appear to + * increment approx. 1/3 of a scanline before start of vblank. + * The registers still get latched at start of vblank however. + * This means we must not write any registers on the first + * line of vblank (since not the whole line is actually in + * vblank). And unfortunately we can't use the interrupt to + * wait here since it will fire too soon. We could use the + * frame start interrupt instead since it will fire after the + * critical scanline, but that would require more changes + * in the interrupt code. So for now we'll just do the nasty + * thing and poll for the bad scanline to pass us by. + * + * FIXME figure out if BXT+ DSI suffers from this as well + */ + while (need_vlv_dsi_wa && scanline == vblank_start) + scanline = intel_get_crtc_scanline(crtc); + crtc->debug.scanline_start = scanline; crtc->debug.start_vbl_time = ktime_get(); crtc->debug.start_vbl_count = intel_crtc_get_vblank_counter(crtc); From 27fe407cb5122f12cfe976813686e8206425c32a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 6 Jun 2017 16:32:29 +0300 Subject: [PATCH 0556/1065] drm/i915: Restore has_fbc=1 for ILK-M MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Restore the lost has_fbc flag for mobile ILK. Cc: Carlos Santa Cc: Rodrigo Vivi Fixes: a13233804686 ("drm/i915: Introduce GEN5_FEATURES for device info") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi (cherry picked from commit c2d1a0ced2603c4a17fa9c53c37e415905cf5a6d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c index 03dbc7f2861e..1a78363c7f4a 100644 --- a/drivers/gpu/drm/i915/i915_pci.c +++ b/drivers/gpu/drm/i915/i915_pci.c @@ -208,7 +208,7 @@ static const struct intel_device_info intel_ironlake_d_info = { static const struct intel_device_info intel_ironlake_m_info = { GEN5_FEATURES, .platform = INTEL_IRONLAKE, - .is_mobile = 1, + .is_mobile = 1, .has_fbc = 1, }; #define GEN6_FEATURES \ From 1065467ed8e2601bf2d7018cf47c557ccbea3769 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 31 Mar 2017 21:00:56 +0300 Subject: [PATCH 0557/1065] drm/i915: Fix 90/270 rotated coordinates for FBC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The clipped src coordinates have already been rotated by 270 degrees for when the plane rotation is 90/270 degrees, hence the FBC code should no longer swap the width and height. Cc: stable@vger.kernel.org Cc: Tvrtko Ursulin Cc: Paulo Zanoni Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com Reviewed-by: Paulo Zanoni Tested-by: Tvrtko Ursulin Reviewed-by: Maarten Lankhorst (cherry picked from commit 73714c05df97d7527e7eaaa771472ef2ede46fa3) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbc.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c index ded2add18b26..d93c58410bff 100644 --- a/drivers/gpu/drm/i915/intel_fbc.c +++ b/drivers/gpu/drm/i915/intel_fbc.c @@ -82,20 +82,10 @@ static unsigned int get_crtc_fence_y_offset(struct intel_crtc *crtc) static void intel_fbc_get_plane_source_size(struct intel_fbc_state_cache *cache, int *width, int *height) { - int w, h; - - if (drm_rotation_90_or_270(cache->plane.rotation)) { - w = cache->plane.src_h; - h = cache->plane.src_w; - } else { - w = cache->plane.src_w; - h = cache->plane.src_h; - } - if (width) - *width = w; + *width = cache->plane.src_w; if (height) - *height = h; + *height = cache->plane.src_h; } static int intel_fbc_calculate_cfb_size(struct drm_i915_private *dev_priv, @@ -746,6 +736,11 @@ static void intel_fbc_update_state_cache(struct intel_crtc *crtc, cache->crtc.hsw_bdw_pixel_rate = crtc_state->pixel_rate; cache->plane.rotation = plane_state->base.rotation; + /* + * Src coordinates are already rotated by 270 degrees for + * the 90/270 degree plane rotation cases (to match the + * GTT mapping), hence no need to account for rotation here. + */ cache->plane.src_w = drm_rect_width(&plane_state->base.src) >> 16; cache->plane.src_h = drm_rect_height(&plane_state->base.src) >> 16; cache->plane.visible = plane_state->base.visible; From a41b816c174409417d91b4ceef0145c9f0bef67c Mon Sep 17 00:00:00 2001 From: Joseph Qi Date: Wed, 7 Jun 2017 11:36:14 +0800 Subject: [PATCH 0558/1065] blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer I have encountered a NULL pointer dereference in throtl_schedule_pending_timer: [ 413.735396] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 [ 413.735535] IP: [] throtl_schedule_pending_timer+0x3f/0x210 [ 413.735643] PGD 22c8cf067 PUD 22cb34067 PMD 0 [ 413.735713] Oops: 0000 [#1] SMP ...... This is caused by the following case: blk_throtl_bio throtl_schedule_next_dispatch <= sq is top level one without parent throtl_schedule_pending_timer sq_to_tg(sq)->td->throtl_slice <= sq_to_tg(sq) returns NULL Fix it by using sq_to_td instead of sq_to_tg(sq)->td, which will always return a valid td. Fixes: 297e3d854784 ("blk-throttle: make throtl_slice tunable") Signed-off-by: Joseph Qi Reviewed-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-throttle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-throttle.c b/block/blk-throttle.c index fc13dd0c6e39..3b751f706c61 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -698,7 +698,7 @@ static void throtl_dequeue_tg(struct throtl_grp *tg) static void throtl_schedule_pending_timer(struct throtl_service_queue *sq, unsigned long expires) { - unsigned long max_expire = jiffies + 8 * sq_to_tg(sq)->td->throtl_slice; + unsigned long max_expire = jiffies + 8 * sq_to_td(sq)->throtl_slice; /* * Since we are adjusting the throttle limit dynamically, the sleep From 8604889f83381cac42b849acc6c420af6df9b35b Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 29 May 2017 16:15:52 +0200 Subject: [PATCH 0559/1065] drm/meson: Fix driver bind when only CVBS is available While introducing HDMI support, component matching on connectors node were bypassed since no driver would actually bind on the DT node. But when only a CVBS connector is present, only a single node is found in the graph, but ignored and a NULL match table is given to the component code. This code permits bypassing the components framework by binding directly the DRM driver when no components needs to be loaded. Fixes: a41e82e6c457 ("drm/meson: Add support for components") Signed-off-by: Neil Armstrong Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/1496067352-8733-1-git-send-email-narmstrong@baylibre.com --- drivers/gpu/drm/meson/meson_drv.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index 75382f5f0fce..10b227d83e9a 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -152,7 +152,7 @@ static struct regmap_config meson_regmap_config = { .max_register = 0x1000, }; -static int meson_drv_bind(struct device *dev) +static int meson_drv_bind_master(struct device *dev, bool has_components) { struct platform_device *pdev = to_platform_device(dev); struct meson_drm *priv; @@ -233,10 +233,12 @@ static int meson_drv_bind(struct device *dev) if (ret) goto free_drm; - ret = component_bind_all(drm->dev, drm); - if (ret) { - dev_err(drm->dev, "Couldn't bind all components\n"); - goto free_drm; + if (has_components) { + ret = component_bind_all(drm->dev, drm); + if (ret) { + dev_err(drm->dev, "Couldn't bind all components\n"); + goto free_drm; + } } ret = meson_plane_create(priv); @@ -276,6 +278,11 @@ free_drm: return ret; } +static int meson_drv_bind(struct device *dev) +{ + return meson_drv_bind_master(dev, true); +} + static void meson_drv_unbind(struct device *dev) { struct drm_device *drm = dev_get_drvdata(dev); @@ -357,6 +364,9 @@ static int meson_drv_probe(struct platform_device *pdev) count += meson_probe_remote(pdev, &match, np, remote); } + if (count && !match) + return meson_drv_bind_master(&pdev->dev, false); + /* If some endpoints were found, initialize the nodes */ if (count) { dev_info(&pdev->dev, "Queued %d outputs on vpu\n", count); From 6679a90c4b0dc2563383df1fe0eb170736952a2e Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 6 Jun 2017 12:40:43 -0700 Subject: [PATCH 0560/1065] blk-throttle: set default latency baseline for harddisk hard disk IO latency varies a lot depending on spindle move. The latency range could be from several microseconds to several milliseconds. It's pretty hard to get the baseline latency used by io.low. We will use a different stragety here. The idea is only using IO with spindle move to determine if cgroup IO is in good state. For HD, if io latency is small (< 1ms), we ignore the IO. Such IO is likely from sequential IO, and is helpless to help determine if a cgroup's IO is impacted by other cgroups. With this, we only account IO with big latency. Then we can choose a hardcoded baseline latency for HD (4ms, which is typical IO latency with seek). With all these settings, the io.low latency works for both HD and SSD. Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-throttle.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 3b751f706c61..a7285bf2831c 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -27,6 +27,13 @@ static int throtl_quantum = 32; #define MIN_THROTL_IOPS (10) #define DFL_LATENCY_TARGET (-1L) #define DFL_IDLE_THRESHOLD (0) +#define DFL_HD_BASELINE_LATENCY (4000L) /* 4ms */ +#define LATENCY_FILTERED_SSD (0) +/* + * For HD, very small latency comes from sequential IO. Such IO is helpless to + * help determine if its IO is impacted by others, hence we ignore the IO + */ +#define LATENCY_FILTERED_HD (1000L) /* 1ms */ #define SKIP_LATENCY (((u64)1) << BLK_STAT_RES_SHIFT) @@ -212,6 +219,7 @@ struct throtl_data struct avg_latency_bucket avg_buckets[LATENCY_BUCKET_SIZE]; struct latency_bucket __percpu *latency_buckets; unsigned long last_calculate_time; + unsigned long filtered_latency; bool track_bio_latency; }; @@ -2281,7 +2289,7 @@ void blk_throtl_bio_endio(struct bio *bio) throtl_track_latency(tg->td, blk_stat_size(&bio->bi_issue_stat), bio_op(bio), lat); - if (tg->latency_target) { + if (tg->latency_target && lat >= tg->td->filtered_latency) { int bucket; unsigned int threshold; @@ -2417,14 +2425,20 @@ void blk_throtl_exit(struct request_queue *q) void blk_throtl_register_queue(struct request_queue *q) { struct throtl_data *td; + int i; td = q->td; BUG_ON(!td); - if (blk_queue_nonrot(q)) + if (blk_queue_nonrot(q)) { td->throtl_slice = DFL_THROTL_SLICE_SSD; - else + td->filtered_latency = LATENCY_FILTERED_SSD; + } else { td->throtl_slice = DFL_THROTL_SLICE_HD; + td->filtered_latency = LATENCY_FILTERED_HD; + for (i = 0; i < LATENCY_BUCKET_SIZE; i++) + td->avg_buckets[i].latency = DFL_HD_BASELINE_LATENCY; + } #ifndef CONFIG_BLK_DEV_THROTTLING_LOW /* if no low limit, use previous default */ td->throtl_slice = DFL_THROTL_SLICE_HD; From c28294b941232931fbd714099798eb7aa7e865d7 Mon Sep 17 00:00:00 2001 From: Alexander Potapenko Date: Tue, 6 Jun 2017 15:56:54 +0200 Subject: [PATCH 0561/1065] net: don't call strlen on non-terminated string in dev_set_alias() KMSAN reported a use of uninitialized memory in dev_set_alias(), which was caused by calling strlcpy() (which in turn called strlen()) on the user-supplied non-terminated string. Signed-off-by: Alexander Potapenko Signed-off-by: David S. Miller --- net/core/dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index fca407b4a6ea..84e1e86a4bce 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1253,8 +1253,9 @@ int dev_set_alias(struct net_device *dev, const char *alias, size_t len) if (!new_ifalias) return -ENOMEM; dev->ifalias = new_ifalias; + memcpy(dev->ifalias, alias, len); + dev->ifalias[len] = 0; - strlcpy(dev->ifalias, alias, len+1); return len; } From 996652c7050c70008e4434af108be6f15f20fbd0 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Tue, 6 Jun 2017 16:30:31 +0200 Subject: [PATCH 0562/1065] bnx2x: fix pf2vf bulletin DMA mapping leak When freeing VF's DMA mappings, an already NULLed pointer was checked again due to an apparent copy&paste error. Consequently, the pf2vf bulletin DMA mapping was not freed. Signed-off-by: Michal Schmidt Acked-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index bdfd53b46bc5..870ea001a720 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -3042,7 +3042,7 @@ void bnx2x_vf_pci_dealloc(struct bnx2x *bp) { BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, sizeof(struct bnx2x_vf_mbx_msg)); - BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->pf2vf_bulletin_mapping, + BNX2X_PCI_FREE(bp->pf2vf_bulletin, bp->pf2vf_bulletin_mapping, sizeof(union pf_vf_bulletin)); } From e4061d572cef1f990bb7761f45d00342daa27fbd Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Tue, 6 Jun 2017 19:01:37 +0300 Subject: [PATCH 0563/1065] net: fix up hash documentation commit 61b905da33 ("net: Rename skb->rxhash to skb->hash") didn't update the documentation, fix this up. Cc: Tom Herbert Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- Documentation/networking/scaling.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt index 59f4db2a0c85..f55639d71d35 100644 --- a/Documentation/networking/scaling.txt +++ b/Documentation/networking/scaling.txt @@ -122,7 +122,7 @@ associated flow of the packet. The hash is either provided by hardware or will be computed in the stack. Capable hardware can pass the hash in the receive descriptor for the packet; this would usually be the same hash used for RSS (e.g. computed Toeplitz hash). The hash is saved in -skb->rx_hash and can be used elsewhere in the stack as a hash of the +skb->hash and can be used elsewhere in the stack as a hash of the packet’s flow. Each receive hardware queue has an associated list of CPUs to which From 47eb0c8b4d9eb6368941c6a9bb443f00847a46d7 Mon Sep 17 00:00:00 2001 From: Ulrik De Bie Date: Wed, 7 Jun 2017 10:30:57 -0700 Subject: [PATCH 0564/1065] Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled The Lifebook E546 and E557 touchpad were also not functioning and worked after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add them to the list of machines that need this workaround. Signed-off-by: Ulrik De Bie Reviewed-by: Arjan Opmeer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index e73d968023f7..f1fa1f172107 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1118,8 +1118,10 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse, * Asus UX32VD 0x361f02 00, 15, 0e clickpad * Avatar AVIU-145A2 0x361f00 ? clickpad * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons + * Fujitsu LIFEBOOK E546 0x470f00 50, 12, 09 2 hw buttons * Fujitsu LIFEBOOK E547 0x470f00 50, 12, 09 2 hw buttons * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons + * Fujitsu LIFEBOOK E557 0x570f01 40, 14, 0c 2 hw buttons * Fujitsu T725 0x470f01 05, 12, 09 2 hw buttons * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**) * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons @@ -1524,6 +1526,13 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = { DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E544"), }, }, + { + /* Fujitsu LIFEBOOK E546 does not work with crc_enabled == 0 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E546"), + }, + }, { /* Fujitsu LIFEBOOK E547 does not work with crc_enabled == 0 */ .matches = { @@ -1545,6 +1554,13 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = { DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E556"), }, }, + { + /* Fujitsu LIFEBOOK E557 does not work with crc_enabled == 0 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E557"), + }, + }, { /* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */ .matches = { From 79e25959403e6a79552db28a87abed34de32a1df Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 6 Jun 2017 09:22:00 -0700 Subject: [PATCH 0565/1065] IB/addr: Fix setting source address in addr6_resolve() Commit eea40b8f624f ("infiniband: call ipv6 route lookup via the stub interface") introduced a regression in address resolution when connecting to IPv6 destination addresses. The old code called ip6_route_output(), while the new code calls ipv6_stub->ipv6_dst_lookup(). The two are almost the same, except that ipv6_dst_lookup() also calls ip6_route_get_saddr() if the source address is in6addr_any. This means that the test of ipv6_addr_any(&fl6.saddr) now never succeeds, and so we never copy the source address out. This ends up causing rdma_resolve_addr() to fail, because without a resolved source address, cma_acquire_dev() will fail to find an RDMA device to use. For me, this causes connecting to an NVMe over Fabrics target via RoCE / IPv6 to fail. Fix this by copying out fl6.saddr if ipv6_addr_any() is true for the original source address passed into addr6_resolve(). We can drop our call to ipv6_dev_get_saddr() because ipv6_dst_lookup() already does that work. Fixes: eea40b8f624 ("infiniband: call ipv6 route lookup via the stub interface") Cc: # 3.12+ Signed-off-by: Roland Dreier Acked-by: Paolo Abeni Signed-off-by: Doug Ledford --- drivers/infiniband/core/addr.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 02971e239a18..ece6926fa2e6 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -449,12 +449,7 @@ static int addr6_resolve(struct sockaddr_in6 *src_in, return ret; rt = (struct rt6_info *)dst; - if (ipv6_addr_any(&fl6.saddr)) { - ret = ipv6_dev_get_saddr(addr->net, ip6_dst_idev(dst)->dev, - &fl6.daddr, 0, &fl6.saddr); - if (ret) - goto put; - + if (ipv6_addr_any(&src_in->sin6_addr)) { src_in->sin6_family = AF_INET6; src_in->sin6_addr = fl6.saddr; } @@ -471,9 +466,6 @@ static int addr6_resolve(struct sockaddr_in6 *src_in, *pdst = dst; return 0; -put: - dst_release(dst); - return ret; } #else static int addr6_resolve(struct sockaddr_in6 *src_in, From 3a807b751c66e76bff39da4a9bd9828d7866d025 Mon Sep 17 00:00:00 2001 From: John Allen Date: Tue, 6 Jun 2017 16:55:52 -0500 Subject: [PATCH 0566/1065] ibmvnic: Return failure on attempted mtu change Changing the mtu is currently not supported in the ibmvnic driver. Implement .ndo_change_mtu in the driver so that attempting to use ifconfig to change the mtu will fail and present the user with an error message. Signed-off-by: John Allen Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index a93757c255f7..c0fbeb387db4 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1468,6 +1468,11 @@ static void ibmvnic_netpoll_controller(struct net_device *dev) } #endif +static int ibmvnic_change_mtu(struct net_device *netdev, int new_mtu) +{ + return -EOPNOTSUPP; +} + static const struct net_device_ops ibmvnic_netdev_ops = { .ndo_open = ibmvnic_open, .ndo_stop = ibmvnic_close, @@ -1479,6 +1484,7 @@ static const struct net_device_ops ibmvnic_netdev_ops = { #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = ibmvnic_netpoll_controller, #endif + .ndo_change_mtu = ibmvnic_change_mtu, }; /* ethtool functions */ From e173db36e3090d90651d97ab4bc45ace7f8cc0c6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Antoine=20T=C3=A9nart?= Date: Wed, 7 Jun 2017 08:17:50 +0200 Subject: [PATCH 0567/1065] net: mvpp2: do not bypass the mvpp22_port_mii_set function The mvpp22_port_mii_set() function was added by 2697582144dd, but the function directly returns without doing anything. This return was used when debugging and wasn't removed before sending the patch. Fix this. Fixes: 2697582144dd ("net: mvpp2: handle misc PPv2.1/PPv2.2 differences") Signed-off-by: Antoine Tenart Acked-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index 9b875d776b29..70bca2a6fb02 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -4186,8 +4186,6 @@ static void mvpp22_port_mii_set(struct mvpp2_port *port) { u32 val; - return; - /* Only GOP port 0 has an XLG MAC */ if (port->gop_id == 0) { val = readl(port->base + MVPP22_XLG_CTRL3_REG); From 7005cade1bdbb423413f8aafcbf17a1ec614a585 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 7 Jun 2017 13:45:37 +0200 Subject: [PATCH 0568/1065] bpf, arm64: use separate register for state in stxr Will reported that in BPF_XADD we must use a different register in stxr instruction for the status flag due to otherwise CONSTRAINED UNPREDICTABLE behavior per architecture. Reference manual says [1]: If s == t, then one of the following behaviors must occur: * The instruction is UNDEFINED. * The instruction executes as a NOP. * The instruction performs the store to the specified address, but the value stored is UNKNOWN. Thus, use a different temporary register for the status flag to fix it. Disassembly extract from test 226/STX_XADD_DW from test_bpf.ko: [...] 0000003c: c85f7d4b ldxr x11, [x10] 00000040: 8b07016b add x11, x11, x7 00000044: c80c7d4b stxr w12, x11, [x10] 00000048: 35ffffac cbnz w12, 0x0000003c [...] [1] https://static.docs.arm.com/ddi0487/b/DDI0487B_a_armv8_arm.pdf, p.6132 Fixes: 85f68fe89832 ("bpf, arm64: implement jiting of BPF_XADD") Reported-by: Will Deacon Signed-off-by: Daniel Borkmann Acked-by: Will Deacon Signed-off-by: David S. Miller --- arch/arm64/net/bpf_jit_comp.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index 71f930501ade..c870d6f01ac2 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -36,6 +36,7 @@ int bpf_jit_enable __read_mostly; #define TMP_REG_1 (MAX_BPF_JIT_REG + 0) #define TMP_REG_2 (MAX_BPF_JIT_REG + 1) #define TCALL_CNT (MAX_BPF_JIT_REG + 2) +#define TMP_REG_3 (MAX_BPF_JIT_REG + 3) /* Map BPF registers to A64 registers */ static const int bpf2a64[] = { @@ -57,6 +58,7 @@ static const int bpf2a64[] = { /* temporary registers for internal BPF JIT */ [TMP_REG_1] = A64_R(10), [TMP_REG_2] = A64_R(11), + [TMP_REG_3] = A64_R(12), /* tail_call_cnt */ [TCALL_CNT] = A64_R(26), /* temporary register for blinding constants */ @@ -319,6 +321,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx) const u8 src = bpf2a64[insn->src_reg]; const u8 tmp = bpf2a64[TMP_REG_1]; const u8 tmp2 = bpf2a64[TMP_REG_2]; + const u8 tmp3 = bpf2a64[TMP_REG_3]; const s16 off = insn->off; const s32 imm = insn->imm; const int i = insn - ctx->prog->insnsi; @@ -689,10 +692,10 @@ emit_cond_jmp: emit(A64_PRFM(tmp, PST, L1, STRM), ctx); emit(A64_LDXR(isdw, tmp2, tmp), ctx); emit(A64_ADD(isdw, tmp2, tmp2, src), ctx); - emit(A64_STXR(isdw, tmp2, tmp, tmp2), ctx); + emit(A64_STXR(isdw, tmp2, tmp, tmp3), ctx); jmp_offset = -3; check_imm19(jmp_offset); - emit(A64_CBNZ(0, tmp2, jmp_offset), ctx); + emit(A64_CBNZ(0, tmp3, jmp_offset), ctx); break; /* R0 = ntohx(*(size *)(((struct sk_buff *)R6)->data + imm)) */ From cf124db566e6b036b8bcbe8decbed740bdfac8c6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 8 May 2017 12:52:56 -0400 Subject: [PATCH 0569/1065] net: Fix inconsistent teardown and release of private netdev state. Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 6 +++--- drivers/net/caif/caif_hsi.c | 2 +- drivers/net/caif/caif_serial.c | 2 +- drivers/net/caif/caif_spi.c | 2 +- drivers/net/caif/caif_virtio.c | 2 +- drivers/net/can/slcan.c | 7 +++---- drivers/net/can/vcan.c | 2 +- drivers/net/can/vxcan.c | 2 +- drivers/net/dummy.c | 4 ++-- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 +- drivers/net/geneve.c | 2 +- drivers/net/gtp.c | 2 +- drivers/net/hamradio/6pack.c | 2 +- drivers/net/hamradio/bpqether.c | 2 +- drivers/net/ifb.c | 4 ++-- drivers/net/ipvlan/ipvlan_main.c | 2 +- drivers/net/loopback.c | 4 ++-- drivers/net/macsec.c | 4 ++-- drivers/net/macvlan.c | 2 +- drivers/net/nlmon.c | 2 +- drivers/net/slip/slip.c | 7 +++---- drivers/net/team/team.c | 4 ++-- drivers/net/tun.c | 4 ++-- drivers/net/usb/cdc-phonet.c | 2 +- drivers/net/usb/qmi_wwan.c | 2 +- drivers/net/veth.c | 4 ++-- drivers/net/vrf.c | 2 +- drivers/net/vsockmon.c | 2 +- drivers/net/vxlan.c | 2 +- drivers/net/wan/dlci.c | 2 +- drivers/net/wan/hdlc_fr.c | 2 +- drivers/net/wan/lapbether.c | 2 +- drivers/net/wireless/ath/ath6kl/main.c | 2 +- .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 1 - drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 3 ++- drivers/net/wireless/intersil/hostap/hostap_main.c | 2 +- drivers/net/wireless/mac80211_hwsim.c | 2 +- drivers/net/wireless/marvell/mwifiex/main.c | 2 +- drivers/staging/rtl8188eu/os_dep/mon.c | 2 +- drivers/usb/gadget/function/f_phonet.c | 2 +- include/linux/netdevice.h | 7 ++++--- net/8021q/vlan_dev.c | 4 ++-- net/batman-adv/soft-interface.c | 5 ++--- net/bluetooth/6lowpan.c | 2 +- net/bridge/br_device.c | 2 +- net/caif/chnl_net.c | 4 ++-- net/core/dev.c | 8 ++++++-- net/hsr/hsr_device.c | 4 ++-- net/ieee802154/6lowpan/core.c | 2 +- net/ipv4/ip_tunnel.c | 4 ++-- net/ipv4/ipmr.c | 2 +- net/ipv6/ip6_gre.c | 9 +++++---- net/ipv6/ip6_tunnel.c | 8 ++++---- net/ipv6/ip6_vti.c | 8 ++++---- net/ipv6/ip6mr.c | 2 +- net/ipv6/sit.c | 6 +++--- net/irda/irlan/irlan_eth.c | 2 +- net/l2tp/l2tp_eth.c | 2 +- net/mac80211/iface.c | 6 +++--- net/mac802154/iface.c | 7 +++---- net/openvswitch/vport-internal_dev.c | 4 ++-- net/phonet/pep-gprs.c | 2 +- 62 files changed, 105 insertions(+), 103 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2359478b977f..8ab6bdbe1682 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4192,7 +4192,6 @@ static void bond_destructor(struct net_device *bond_dev) struct bonding *bond = netdev_priv(bond_dev); if (bond->wq) destroy_workqueue(bond->wq); - free_netdev(bond_dev); } void bond_setup(struct net_device *bond_dev) @@ -4212,7 +4211,8 @@ void bond_setup(struct net_device *bond_dev) bond_dev->netdev_ops = &bond_netdev_ops; bond_dev->ethtool_ops = &bond_ethtool_ops; - bond_dev->destructor = bond_destructor; + bond_dev->needs_free_netdev = true; + bond_dev->priv_destructor = bond_destructor; SET_NETDEV_DEVTYPE(bond_dev, &bond_type); @@ -4736,7 +4736,7 @@ int bond_create(struct net *net, const char *name) rtnl_unlock(); if (res < 0) - bond_destructor(bond_dev); + free_netdev(bond_dev); return res; } diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index ddabce759456..71a7c3b44fdd 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -1121,7 +1121,7 @@ static void cfhsi_setup(struct net_device *dev) dev->flags = IFF_POINTOPOINT | IFF_NOARP; dev->mtu = CFHSI_MAX_CAIF_FRAME_SZ; dev->priv_flags |= IFF_NO_QUEUE; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->netdev_ops = &cfhsi_netdevops; for (i = 0; i < CFHSI_PRIO_LAST; ++i) skb_queue_head_init(&cfhsi->qhead[i]); diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c index c2dea4916e5d..76e1d3545105 100644 --- a/drivers/net/caif/caif_serial.c +++ b/drivers/net/caif/caif_serial.c @@ -428,7 +428,7 @@ static void caifdev_setup(struct net_device *dev) dev->flags = IFF_POINTOPOINT | IFF_NOARP; dev->mtu = CAIF_MAX_MTU; dev->priv_flags |= IFF_NO_QUEUE; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; skb_queue_head_init(&serdev->head); serdev->common.link_select = CAIF_LINK_LOW_LATENCY; serdev->common.use_frag = true; diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c index 3a529fbe539f..fc21afe852b9 100644 --- a/drivers/net/caif/caif_spi.c +++ b/drivers/net/caif/caif_spi.c @@ -712,7 +712,7 @@ static void cfspi_setup(struct net_device *dev) dev->flags = IFF_NOARP | IFF_POINTOPOINT; dev->priv_flags |= IFF_NO_QUEUE; dev->mtu = SPI_MAX_PAYLOAD_SIZE; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; skb_queue_head_init(&cfspi->qhead); skb_queue_head_init(&cfspi->chead); cfspi->cfdev.link_select = CAIF_LINK_HIGH_BANDW; diff --git a/drivers/net/caif/caif_virtio.c b/drivers/net/caif/caif_virtio.c index 6122768c8644..1794ea0420b7 100644 --- a/drivers/net/caif/caif_virtio.c +++ b/drivers/net/caif/caif_virtio.c @@ -617,7 +617,7 @@ static void cfv_netdev_setup(struct net_device *netdev) netdev->tx_queue_len = 100; netdev->flags = IFF_POINTOPOINT | IFF_NOARP; netdev->mtu = CFV_DEF_MTU_SIZE; - netdev->destructor = free_netdev; + netdev->needs_free_netdev = true; } /* Create debugfs counters for the device */ diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index eb7173713bbc..6a6e896e52fa 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -417,7 +417,7 @@ static int slc_open(struct net_device *dev) static void slc_free_netdev(struct net_device *dev) { int i = dev->base_addr; - free_netdev(dev); + slcan_devs[i] = NULL; } @@ -436,7 +436,8 @@ static const struct net_device_ops slc_netdev_ops = { static void slc_setup(struct net_device *dev) { dev->netdev_ops = &slc_netdev_ops; - dev->destructor = slc_free_netdev; + dev->needs_free_netdev = true; + dev->priv_destructor = slc_free_netdev; dev->hard_header_len = 0; dev->addr_len = 0; @@ -761,8 +762,6 @@ static void __exit slcan_exit(void) if (sl->tty) { printk(KERN_ERR "%s: tty discipline still running\n", dev->name); - /* Intentionally leak the control block. */ - dev->destructor = NULL; } unregister_netdev(dev); diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c index facca33d53e9..0eda1b308583 100644 --- a/drivers/net/can/vcan.c +++ b/drivers/net/can/vcan.c @@ -163,7 +163,7 @@ static void vcan_setup(struct net_device *dev) dev->flags |= IFF_ECHO; dev->netdev_ops = &vcan_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; } static struct rtnl_link_ops vcan_link_ops __read_mostly = { diff --git a/drivers/net/can/vxcan.c b/drivers/net/can/vxcan.c index 7fbb24795681..30cf2368becf 100644 --- a/drivers/net/can/vxcan.c +++ b/drivers/net/can/vxcan.c @@ -156,7 +156,7 @@ static void vxcan_setup(struct net_device *dev) dev->tx_queue_len = 0; dev->flags = (IFF_NOARP|IFF_ECHO); dev->netdev_ops = &vxcan_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; } /* forward declaration for rtnl_create_link() */ diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c index 149244aac20a..9905b52fe293 100644 --- a/drivers/net/dummy.c +++ b/drivers/net/dummy.c @@ -328,7 +328,6 @@ static void dummy_free_netdev(struct net_device *dev) struct dummy_priv *priv = netdev_priv(dev); kfree(priv->vfinfo); - free_netdev(dev); } static void dummy_setup(struct net_device *dev) @@ -338,7 +337,8 @@ static void dummy_setup(struct net_device *dev) /* Initialize the device structure. */ dev->netdev_ops = &dummy_netdev_ops; dev->ethtool_ops = &dummy_ethtool_ops; - dev->destructor = dummy_free_netdev; + dev->needs_free_netdev = true; + dev->priv_destructor = dummy_free_netdev; /* Fill in device structure with ethernet-generic values. */ dev->flags |= IFF_NOARP; diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 77ed2f628f9c..ea1bfcf1870a 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -4525,7 +4525,7 @@ static void dummy_setup(struct net_device *dev) /* Initialize the device structure. */ dev->netdev_ops = &cxgb4_mgmt_netdev_ops; dev->ethtool_ops = &cxgb4_mgmt_ethtool_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; } static int config_mgmt_dev(struct pci_dev *pdev) diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 6ebb0f559a42..199459bd6961 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1007,7 +1007,7 @@ static void geneve_setup(struct net_device *dev) dev->netdev_ops = &geneve_netdev_ops; dev->ethtool_ops = &geneve_ethtool_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; SET_NETDEV_DEVTYPE(dev, &geneve_type); diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c index 7b652bb7ebe4..ca110cd2a4e4 100644 --- a/drivers/net/gtp.c +++ b/drivers/net/gtp.c @@ -611,7 +611,7 @@ static const struct net_device_ops gtp_netdev_ops = { static void gtp_link_setup(struct net_device *dev) { dev->netdev_ops = >p_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->hard_header_len = 0; dev->addr_len = 0; diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 922bf440e9f1..021a8ec411ab 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -311,7 +311,7 @@ static void sp_setup(struct net_device *dev) { /* Finish setting up the DEVICE info. */ dev->netdev_ops = &sp_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->mtu = SIXP_MTU; dev->hard_header_len = AX25_MAX_HEADER_LEN; dev->header_ops = &ax25_header_ops; diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index f62e7f325cf9..78a6414c5fd9 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -476,7 +476,7 @@ static const struct net_device_ops bpq_netdev_ops = { static void bpq_setup(struct net_device *dev) { dev->netdev_ops = &bpq_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 312fce7302d3..144ea5ae8ab4 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -207,7 +207,6 @@ static void ifb_dev_free(struct net_device *dev) __skb_queue_purge(&txp->tq); } kfree(dp->tx_private); - free_netdev(dev); } static void ifb_setup(struct net_device *dev) @@ -230,7 +229,8 @@ static void ifb_setup(struct net_device *dev) dev->priv_flags &= ~IFF_TX_SKB_SHARING; netif_keep_dst(dev); eth_hw_addr_random(dev); - dev->destructor = ifb_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = ifb_dev_free; } static netdev_tx_t ifb_xmit(struct sk_buff *skb, struct net_device *dev) diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c index 618ed88fad0f..7c7680c8f0e3 100644 --- a/drivers/net/ipvlan/ipvlan_main.c +++ b/drivers/net/ipvlan/ipvlan_main.c @@ -632,7 +632,7 @@ void ipvlan_link_setup(struct net_device *dev) dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING); dev->priv_flags |= IFF_UNICAST_FLT | IFF_NO_QUEUE; dev->netdev_ops = &ipvlan_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->header_ops = &ipvlan_header_ops; dev->ethtool_ops = &ipvlan_ethtool_ops; } diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index 224f65cb576b..30612497643c 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -159,7 +159,6 @@ static void loopback_dev_free(struct net_device *dev) { dev_net(dev)->loopback_dev = NULL; free_percpu(dev->lstats); - free_netdev(dev); } static const struct net_device_ops loopback_ops = { @@ -196,7 +195,8 @@ static void loopback_setup(struct net_device *dev) dev->ethtool_ops = &loopback_ethtool_ops; dev->header_ops = ð_header_ops; dev->netdev_ops = &loopback_ops; - dev->destructor = loopback_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = loopback_dev_free; } /* Setup and register the loopback device. */ diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index cdc347be68f2..79411675f0e6 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -2996,7 +2996,6 @@ static void macsec_free_netdev(struct net_device *dev) free_percpu(macsec->secy.tx_sc.stats); dev_put(real_dev); - free_netdev(dev); } static void macsec_setup(struct net_device *dev) @@ -3006,7 +3005,8 @@ static void macsec_setup(struct net_device *dev) dev->max_mtu = ETH_MAX_MTU; dev->priv_flags |= IFF_NO_QUEUE; dev->netdev_ops = &macsec_netdev_ops; - dev->destructor = macsec_free_netdev; + dev->needs_free_netdev = true; + dev->priv_destructor = macsec_free_netdev; SET_NETDEV_DEVTYPE(dev, &macsec_type); eth_zero_addr(dev->broadcast); diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 346ad2ff3998..67bf7ebae5c6 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -1092,7 +1092,7 @@ void macvlan_common_setup(struct net_device *dev) netif_keep_dst(dev); dev->priv_flags |= IFF_UNICAST_FLT; dev->netdev_ops = &macvlan_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->header_ops = &macvlan_hard_header_ops; dev->ethtool_ops = &macvlan_ethtool_ops; } diff --git a/drivers/net/nlmon.c b/drivers/net/nlmon.c index b91603835d26..c4b3362da4a2 100644 --- a/drivers/net/nlmon.c +++ b/drivers/net/nlmon.c @@ -113,7 +113,7 @@ static void nlmon_setup(struct net_device *dev) dev->netdev_ops = &nlmon_ops; dev->ethtool_ops = &nlmon_ethtool_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA | NETIF_F_LLTX; diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 1da31dc47f86..74b907206aa7 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -629,7 +629,7 @@ static void sl_uninit(struct net_device *dev) static void sl_free_netdev(struct net_device *dev) { int i = dev->base_addr; - free_netdev(dev); + slip_devs[i] = NULL; } @@ -651,7 +651,8 @@ static const struct net_device_ops sl_netdev_ops = { static void sl_setup(struct net_device *dev) { dev->netdev_ops = &sl_netdev_ops; - dev->destructor = sl_free_netdev; + dev->needs_free_netdev = true; + dev->priv_destructor = sl_free_netdev; dev->hard_header_len = 0; dev->addr_len = 0; @@ -1369,8 +1370,6 @@ static void __exit slip_exit(void) if (sl->tty) { printk(KERN_ERR "%s: tty discipline still running\n", dev->name); - /* Intentionally leak the control block. */ - dev->destructor = NULL; } unregister_netdev(dev); diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 6c5d5ef46f75..fba8c136aa7c 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1643,7 +1643,6 @@ static void team_destructor(struct net_device *dev) struct team *team = netdev_priv(dev); free_percpu(team->pcpu_stats); - free_netdev(dev); } static int team_open(struct net_device *dev) @@ -2079,7 +2078,8 @@ static void team_setup(struct net_device *dev) dev->netdev_ops = &team_netdev_ops; dev->ethtool_ops = &team_ethtool_ops; - dev->destructor = team_destructor; + dev->needs_free_netdev = true; + dev->priv_destructor = team_destructor; dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING); dev->priv_flags |= IFF_NO_QUEUE; dev->priv_flags |= IFF_TEAM; diff --git a/drivers/net/tun.c b/drivers/net/tun.c index bbd707b9ef7a..9ee7d4275640 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1560,7 +1560,6 @@ static void tun_free_netdev(struct net_device *dev) free_percpu(tun->pcpu_stats); tun_flow_uninit(tun); security_tun_dev_free_security(tun->security); - free_netdev(dev); } static void tun_setup(struct net_device *dev) @@ -1571,7 +1570,8 @@ static void tun_setup(struct net_device *dev) tun->group = INVALID_GID; dev->ethtool_ops = &tun_ethtool_ops; - dev->destructor = tun_free_netdev; + dev->needs_free_netdev = true; + dev->priv_destructor = tun_free_netdev; /* We prefer our own queue length */ dev->tx_queue_len = TUN_READQ_SIZE; } diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c index eb52de8205f0..c7a350bbaaa7 100644 --- a/drivers/net/usb/cdc-phonet.c +++ b/drivers/net/usb/cdc-phonet.c @@ -298,7 +298,7 @@ static void usbpn_setup(struct net_device *dev) dev->addr_len = 1; dev->tx_queue_len = 3; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; } /* diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 8f923a147fa9..949671ce4039 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -123,7 +123,7 @@ static void qmimux_setup(struct net_device *dev) dev->addr_len = 0; dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; dev->netdev_ops = &qmimux_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; } static struct net_device *qmimux_find_dev(struct usbnet *dev, u8 mux_id) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 38f0f03a29c8..0156fe8cac17 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -222,7 +222,6 @@ static int veth_dev_init(struct net_device *dev) static void veth_dev_free(struct net_device *dev) { free_percpu(dev->vstats); - free_netdev(dev); } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -317,7 +316,8 @@ static void veth_setup(struct net_device *dev) NETIF_F_HW_VLAN_STAG_TX | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX); - dev->destructor = veth_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = veth_dev_free; dev->max_mtu = ETH_MAX_MTU; dev->hw_features = VETH_FEATURES; diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index db882493875c..d38f11d833fe 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -1348,7 +1348,7 @@ static void vrf_setup(struct net_device *dev) dev->netdev_ops = &vrf_netdev_ops; dev->l3mdev_ops = &vrf_l3mdev_ops; dev->ethtool_ops = &vrf_ethtool_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; /* Fill in device structure with ethernet-generic values. */ eth_hw_addr_random(dev); diff --git a/drivers/net/vsockmon.c b/drivers/net/vsockmon.c index 7f0136f2dd9d..c28bdce14fd5 100644 --- a/drivers/net/vsockmon.c +++ b/drivers/net/vsockmon.c @@ -135,7 +135,7 @@ static void vsockmon_setup(struct net_device *dev) dev->netdev_ops = &vsockmon_ops; dev->ethtool_ops = &vsockmon_ethtool_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA | NETIF_F_LLTX; diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index a6b5052c1d36..5fa798a5c9a6 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2611,7 +2611,7 @@ static void vxlan_setup(struct net_device *dev) eth_hw_addr_random(dev); ether_setup(dev); - dev->destructor = free_netdev; + dev->needs_free_netdev = true; SET_NETDEV_DEVTYPE(dev, &vxlan_type); dev->features |= NETIF_F_LLTX; diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c index 65ee2a6f248c..a0d76f70c428 100644 --- a/drivers/net/wan/dlci.c +++ b/drivers/net/wan/dlci.c @@ -475,7 +475,7 @@ static void dlci_setup(struct net_device *dev) dev->flags = 0; dev->header_ops = &dlci_header_ops; dev->netdev_ops = &dlci_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dlp->receive = dlci_receive; diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index eb915281197e..78596e42a3f3 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -1106,7 +1106,7 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type) return -EIO; } - dev->destructor = free_netdev; + dev->needs_free_netdev = true; *get_dev_p(pvc, type) = dev; if (!used) { state(hdlc)->dce_changed = 1; diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 9df9ed62beff..63f749078a1f 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -306,7 +306,7 @@ static const struct net_device_ops lapbeth_netdev_ops = { static void lapbeth_setup(struct net_device *dev) { dev->netdev_ops = &lapbeth_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->type = ARPHRD_X25; dev->hard_header_len = 3; dev->mtu = 1000; diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c index 91ee542de3d7..b90c77ef792e 100644 --- a/drivers/net/wireless/ath/ath6kl/main.c +++ b/drivers/net/wireless/ath/ath6kl/main.c @@ -1287,7 +1287,7 @@ void init_netdev(struct net_device *dev) struct ath6kl *ar = ath6kl_priv(dev); dev->netdev_ops = &ath6kl_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->watchdog_timeo = ATH6KL_TX_TIMEOUT; dev->needed_headroom = ETH_HLEN; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index cd1d6730eab7..617199c0e5a0 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -5225,7 +5225,6 @@ void brcmf_cfg80211_free_netdev(struct net_device *ndev) if (vif) brcmf_free_vif(vif); - free_netdev(ndev); } static bool brcmf_is_linkup(const struct brcmf_event_msg *e) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c index a3d82368f1a9..511d190c6cca 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c @@ -624,7 +624,8 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx, if (!ndev) return ERR_PTR(-ENOMEM); - ndev->destructor = brcmf_cfg80211_free_netdev; + ndev->needs_free_netdev = true; + ndev->priv_destructor = brcmf_cfg80211_free_netdev; ifp = netdev_priv(ndev); ifp->ndev = ndev; /* store mapping ifidx to bsscfgidx */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_main.c b/drivers/net/wireless/intersil/hostap/hostap_main.c index 544fc09dcb62..1372b20f931e 100644 --- a/drivers/net/wireless/intersil/hostap/hostap_main.c +++ b/drivers/net/wireless/intersil/hostap/hostap_main.c @@ -73,7 +73,7 @@ struct net_device * hostap_add_interface(struct local_info *local, dev->mem_end = mdev->mem_end; hostap_setup_dev(dev, local, type); - dev->destructor = free_netdev; + dev->needs_free_netdev = true; sprintf(dev->name, "%s%s", prefix, name); if (!rtnl_locked) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 002b25cff5b6..c854a557998b 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2861,7 +2861,7 @@ static const struct net_device_ops hwsim_netdev_ops = { static void hwsim_mon_setup(struct net_device *dev) { dev->netdev_ops = &hwsim_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; ether_setup(dev); dev->priv_flags |= IFF_NO_QUEUE; dev->type = ARPHRD_IEEE80211_RADIOTAP; diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c index dd87b9ff64c3..39b6b5e3f6e0 100644 --- a/drivers/net/wireless/marvell/mwifiex/main.c +++ b/drivers/net/wireless/marvell/mwifiex/main.c @@ -1280,7 +1280,7 @@ void mwifiex_init_priv_params(struct mwifiex_private *priv, struct net_device *dev) { dev->netdev_ops = &mwifiex_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; /* Initialize private structure */ priv->current_key_index = 0; priv->media_connected = false; diff --git a/drivers/staging/rtl8188eu/os_dep/mon.c b/drivers/staging/rtl8188eu/os_dep/mon.c index cfe37eb026d6..859d0d6051cd 100644 --- a/drivers/staging/rtl8188eu/os_dep/mon.c +++ b/drivers/staging/rtl8188eu/os_dep/mon.c @@ -152,7 +152,7 @@ static const struct net_device_ops mon_netdev_ops = { static void mon_setup(struct net_device *dev) { dev->netdev_ops = &mon_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; ether_setup(dev); dev->priv_flags |= IFF_NO_QUEUE; dev->type = ARPHRD_IEEE80211; diff --git a/drivers/usb/gadget/function/f_phonet.c b/drivers/usb/gadget/function/f_phonet.c index b4058f0000e4..6a1ce6a55158 100644 --- a/drivers/usb/gadget/function/f_phonet.c +++ b/drivers/usb/gadget/function/f_phonet.c @@ -281,7 +281,7 @@ static void pn_net_setup(struct net_device *dev) dev->tx_queue_len = 1; dev->netdev_ops = &pn_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->header_ops = &phonet_header_ops; } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3f39d27decf4..ab7ca3fdc495 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1596,8 +1596,8 @@ enum netdev_priv_flags { * @rtnl_link_state: This enum represents the phases of creating * a new link * - * @destructor: Called from unregister, - * can be used to call free_netdev + * @needs_free_netdev: Should unregister perform free_netdev? + * @priv_destructor: Called from unregister * @npinfo: XXX: need comments on this one * @nd_net: Network namespace this network device is inside * @@ -1858,7 +1858,8 @@ struct net_device { RTNL_LINK_INITIALIZING, } rtnl_link_state:16; - void (*destructor)(struct net_device *dev); + bool needs_free_netdev; + void (*priv_destructor)(struct net_device *dev); #ifdef CONFIG_NETPOLL struct netpoll_info __rcu *npinfo; diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 953b6728bd00..abc5f400fc71 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -813,7 +813,6 @@ static void vlan_dev_free(struct net_device *dev) free_percpu(vlan->vlan_pcpu_stats); vlan->vlan_pcpu_stats = NULL; - free_netdev(dev); } void vlan_setup(struct net_device *dev) @@ -826,7 +825,8 @@ void vlan_setup(struct net_device *dev) netif_keep_dst(dev); dev->netdev_ops = &vlan_netdev_ops; - dev->destructor = vlan_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = vlan_dev_free; dev->ethtool_ops = &vlan_ethtool_ops; dev->min_mtu = 0; diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index b25789abf7b9..10f7edfb176e 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -1034,8 +1034,6 @@ static void batadv_softif_free(struct net_device *dev) * netdev and its private data (bat_priv) */ rcu_barrier(); - - free_netdev(dev); } /** @@ -1047,7 +1045,8 @@ static void batadv_softif_init_early(struct net_device *dev) ether_setup(dev); dev->netdev_ops = &batadv_netdev_ops; - dev->destructor = batadv_softif_free; + dev->needs_free_netdev = true; + dev->priv_destructor = batadv_softif_free; dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_NETNS_LOCAL; dev->priv_flags |= IFF_NO_QUEUE; diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c index 608959989f8e..ab3b654b05cc 100644 --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -598,7 +598,7 @@ static void netdev_setup(struct net_device *dev) dev->netdev_ops = &netdev_ops; dev->header_ops = &header_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; } static struct device_type bt_type = { diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 430b53e7d941..f0f3447e8aa4 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -379,7 +379,7 @@ void br_dev_setup(struct net_device *dev) ether_setup(dev); dev->netdev_ops = &br_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->ethtool_ops = &br_ethtool_ops; SET_NETDEV_DEVTYPE(dev, &br_type); dev->priv_flags = IFF_EBRIDGE | IFF_NO_QUEUE; diff --git a/net/caif/chnl_net.c b/net/caif/chnl_net.c index 1816fc9f1ee7..fe3c53efb949 100644 --- a/net/caif/chnl_net.c +++ b/net/caif/chnl_net.c @@ -392,14 +392,14 @@ static void chnl_net_destructor(struct net_device *dev) { struct chnl_net *priv = netdev_priv(dev); caif_free_client(&priv->chnl); - free_netdev(dev); } static void ipcaif_net_setup(struct net_device *dev) { struct chnl_net *priv; dev->netdev_ops = &netdev_ops; - dev->destructor = chnl_net_destructor; + dev->needs_free_netdev = true; + dev->priv_destructor = chnl_net_destructor; dev->flags |= IFF_NOARP; dev->flags |= IFF_POINTOPOINT; dev->mtu = GPRS_PDP_MTU; diff --git a/net/core/dev.c b/net/core/dev.c index 84e1e86a4bce..4c15466305c3 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -7502,6 +7502,8 @@ out: err_uninit: if (dev->netdev_ops->ndo_uninit) dev->netdev_ops->ndo_uninit(dev); + if (dev->priv_destructor) + dev->priv_destructor(dev); goto out; } EXPORT_SYMBOL(register_netdevice); @@ -7709,8 +7711,10 @@ void netdev_run_todo(void) WARN_ON(rcu_access_pointer(dev->ip6_ptr)); WARN_ON(dev->dn_ptr); - if (dev->destructor) - dev->destructor(dev); + if (dev->priv_destructor) + dev->priv_destructor(dev); + if (dev->needs_free_netdev) + free_netdev(dev); /* Report a network device has been unregistered */ rtnl_lock(); diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c index c73160fb11e7..0a0a392dc2bd 100644 --- a/net/hsr/hsr_device.c +++ b/net/hsr/hsr_device.c @@ -378,7 +378,6 @@ static void hsr_dev_destroy(struct net_device *hsr_dev) del_timer_sync(&hsr->announce_timer); synchronize_rcu(); - free_netdev(hsr_dev); } static const struct net_device_ops hsr_device_ops = { @@ -404,7 +403,8 @@ void hsr_dev_setup(struct net_device *dev) SET_NETDEV_DEVTYPE(dev, &hsr_type); dev->priv_flags |= IFF_NO_QUEUE; - dev->destructor = hsr_dev_destroy; + dev->needs_free_netdev = true; + dev->priv_destructor = hsr_dev_destroy; dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA | NETIF_F_GSO_MASK | NETIF_F_HW_CSUM | diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c index d7efbf0dad20..0a866f332290 100644 --- a/net/ieee802154/6lowpan/core.c +++ b/net/ieee802154/6lowpan/core.c @@ -107,7 +107,7 @@ static void lowpan_setup(struct net_device *ldev) ldev->netdev_ops = &lowpan_netdev_ops; ldev->header_ops = &lowpan_header_ops; - ldev->destructor = free_netdev; + ldev->needs_free_netdev = true; ldev->features |= NETIF_F_NETNS_LOCAL; } diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index b878ecbc0608..b436d0775631 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -967,7 +967,6 @@ static void ip_tunnel_dev_free(struct net_device *dev) gro_cells_destroy(&tunnel->gro_cells); dst_cache_destroy(&tunnel->dst_cache); free_percpu(dev->tstats); - free_netdev(dev); } void ip_tunnel_dellink(struct net_device *dev, struct list_head *head) @@ -1155,7 +1154,8 @@ int ip_tunnel_init(struct net_device *dev) struct iphdr *iph = &tunnel->parms.iph; int err; - dev->destructor = ip_tunnel_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = ip_tunnel_dev_free; dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats); if (!dev->tstats) return -ENOMEM; diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 551de4d023a8..b4f9622ee9f5 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -501,7 +501,7 @@ static void reg_vif_setup(struct net_device *dev) dev->mtu = ETH_DATA_LEN - sizeof(struct iphdr) - 8; dev->flags = IFF_NOARP; dev->netdev_ops = ®_vif_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->features |= NETIF_F_NETNS_LOCAL; } diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 0c5b4caa1949..64eea3962733 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -991,13 +991,13 @@ static void ip6gre_dev_free(struct net_device *dev) dst_cache_destroy(&t->dst_cache); free_percpu(dev->tstats); - free_netdev(dev); } static void ip6gre_tunnel_setup(struct net_device *dev) { dev->netdev_ops = &ip6gre_netdev_ops; - dev->destructor = ip6gre_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = ip6gre_dev_free; dev->type = ARPHRD_IP6GRE; @@ -1148,7 +1148,7 @@ static int __net_init ip6gre_init_net(struct net *net) return 0; err_reg_dev: - ip6gre_dev_free(ign->fb_tunnel_dev); + free_netdev(ign->fb_tunnel_dev); err_alloc_dev: return err; } @@ -1300,7 +1300,8 @@ static void ip6gre_tap_setup(struct net_device *dev) ether_setup(dev); dev->netdev_ops = &ip6gre_tap_netdev_ops; - dev->destructor = ip6gre_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = ip6gre_dev_free; dev->features |= NETIF_F_NETNS_LOCAL; dev->priv_flags &= ~IFF_TX_SKB_SHARING; diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 9b37f9747fc6..c3581973f5d7 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -254,7 +254,6 @@ static void ip6_dev_free(struct net_device *dev) gro_cells_destroy(&t->gro_cells); dst_cache_destroy(&t->dst_cache); free_percpu(dev->tstats); - free_netdev(dev); } static int ip6_tnl_create2(struct net_device *dev) @@ -322,7 +321,7 @@ static struct ip6_tnl *ip6_tnl_create(struct net *net, struct __ip6_tnl_parm *p) return t; failed_free: - ip6_dev_free(dev); + free_netdev(dev); failed: return ERR_PTR(err); } @@ -1777,7 +1776,8 @@ static const struct net_device_ops ip6_tnl_netdev_ops = { static void ip6_tnl_dev_setup(struct net_device *dev) { dev->netdev_ops = &ip6_tnl_netdev_ops; - dev->destructor = ip6_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = ip6_dev_free; dev->type = ARPHRD_TUNNEL6; dev->flags |= IFF_NOARP; @@ -2224,7 +2224,7 @@ static int __net_init ip6_tnl_init_net(struct net *net) return 0; err_register: - ip6_dev_free(ip6n->fb_tnl_dev); + free_netdev(ip6n->fb_tnl_dev); err_alloc_dev: return err; } diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c index d67ef56454b2..837ea1eefe7f 100644 --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -180,7 +180,6 @@ vti6_tnl_unlink(struct vti6_net *ip6n, struct ip6_tnl *t) static void vti6_dev_free(struct net_device *dev) { free_percpu(dev->tstats); - free_netdev(dev); } static int vti6_tnl_create2(struct net_device *dev) @@ -235,7 +234,7 @@ static struct ip6_tnl *vti6_tnl_create(struct net *net, struct __ip6_tnl_parm *p return t; failed_free: - vti6_dev_free(dev); + free_netdev(dev); failed: return NULL; } @@ -842,7 +841,8 @@ static const struct net_device_ops vti6_netdev_ops = { static void vti6_dev_setup(struct net_device *dev) { dev->netdev_ops = &vti6_netdev_ops; - dev->destructor = vti6_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = vti6_dev_free; dev->type = ARPHRD_TUNNEL6; dev->hard_header_len = LL_MAX_HEADER + sizeof(struct ipv6hdr); @@ -1100,7 +1100,7 @@ static int __net_init vti6_init_net(struct net *net) return 0; err_register: - vti6_dev_free(ip6n->fb_tnl_dev); + free_netdev(ip6n->fb_tnl_dev); err_alloc_dev: return err; } diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 374997d26488..2ecb39b943b5 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -733,7 +733,7 @@ static void reg_vif_setup(struct net_device *dev) dev->mtu = 1500 - sizeof(struct ipv6hdr) - 8; dev->flags = IFF_NOARP; dev->netdev_ops = ®_vif_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->features |= NETIF_F_NETNS_LOCAL; } diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 61e5902f0687..2378503577b0 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -265,7 +265,7 @@ static struct ip_tunnel *ipip6_tunnel_locate(struct net *net, return nt; failed_free: - ipip6_dev_free(dev); + free_netdev(dev); failed: return NULL; } @@ -1336,7 +1336,6 @@ static void ipip6_dev_free(struct net_device *dev) dst_cache_destroy(&tunnel->dst_cache); free_percpu(dev->tstats); - free_netdev(dev); } #define SIT_FEATURES (NETIF_F_SG | \ @@ -1351,7 +1350,8 @@ static void ipip6_tunnel_setup(struct net_device *dev) int t_hlen = tunnel->hlen + sizeof(struct iphdr); dev->netdev_ops = &ipip6_netdev_ops; - dev->destructor = ipip6_dev_free; + dev->needs_free_netdev = true; + dev->priv_destructor = ipip6_dev_free; dev->type = ARPHRD_SIT; dev->hard_header_len = LL_MAX_HEADER + t_hlen; diff --git a/net/irda/irlan/irlan_eth.c b/net/irda/irlan/irlan_eth.c index 74d09f91709e..3be852808a9d 100644 --- a/net/irda/irlan/irlan_eth.c +++ b/net/irda/irlan/irlan_eth.c @@ -65,7 +65,7 @@ static void irlan_eth_setup(struct net_device *dev) ether_setup(dev); dev->netdev_ops = &irlan_eth_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->min_mtu = 0; dev->max_mtu = ETH_MAX_MTU; diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c index 8b21af7321b9..f7c54ece3733 100644 --- a/net/l2tp/l2tp_eth.c +++ b/net/l2tp/l2tp_eth.c @@ -141,7 +141,7 @@ static void l2tp_eth_dev_setup(struct net_device *dev) dev->priv_flags &= ~IFF_TX_SKB_SHARING; dev->features |= NETIF_F_LLTX; dev->netdev_ops = &l2tp_eth_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; } static void l2tp_eth_dev_recv(struct l2tp_session *session, struct sk_buff *skb, int data_len) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 8fae1a72e6a7..915d7e1b4545 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1213,7 +1213,6 @@ static const struct net_device_ops ieee80211_monitorif_ops = { static void ieee80211_if_free(struct net_device *dev) { free_percpu(dev->tstats); - free_netdev(dev); } static void ieee80211_if_setup(struct net_device *dev) @@ -1221,7 +1220,8 @@ static void ieee80211_if_setup(struct net_device *dev) ether_setup(dev); dev->priv_flags &= ~IFF_TX_SKB_SHARING; dev->netdev_ops = &ieee80211_dataif_ops; - dev->destructor = ieee80211_if_free; + dev->needs_free_netdev = true; + dev->priv_destructor = ieee80211_if_free; } static void ieee80211_if_setup_no_queue(struct net_device *dev) @@ -1905,7 +1905,7 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, ret = register_netdevice(ndev); if (ret) { - ieee80211_if_free(ndev); + free_netdev(ndev); return ret; } } diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c index 06019dba4b10..bd88a9b80773 100644 --- a/net/mac802154/iface.c +++ b/net/mac802154/iface.c @@ -526,8 +526,6 @@ static void mac802154_wpan_free(struct net_device *dev) struct ieee802154_sub_if_data *sdata = IEEE802154_DEV_TO_SUB_IF(dev); mac802154_llsec_destroy(&sdata->sec); - - free_netdev(dev); } static void ieee802154_if_setup(struct net_device *dev) @@ -593,7 +591,8 @@ ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata, sdata->dev->dev_addr); sdata->dev->header_ops = &mac802154_header_ops; - sdata->dev->destructor = mac802154_wpan_free; + sdata->dev->needs_free_netdev = true; + sdata->dev->priv_destructor = mac802154_wpan_free; sdata->dev->netdev_ops = &mac802154_wpan_ops; sdata->dev->ml_priv = &mac802154_mlme_wpan; wpan_dev->promiscuous_mode = false; @@ -608,7 +607,7 @@ ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata, break; case NL802154_IFTYPE_MONITOR: - sdata->dev->destructor = free_netdev; + sdata->dev->needs_free_netdev = true; sdata->dev->netdev_ops = &mac802154_monitor_ops; wpan_dev->promiscuous_mode = true; break; diff --git a/net/openvswitch/vport-internal_dev.c b/net/openvswitch/vport-internal_dev.c index 89193a634da4..04a3128adcf0 100644 --- a/net/openvswitch/vport-internal_dev.c +++ b/net/openvswitch/vport-internal_dev.c @@ -94,7 +94,6 @@ static void internal_dev_destructor(struct net_device *dev) struct vport *vport = ovs_internal_dev_get_vport(dev); ovs_vport_free(vport); - free_netdev(dev); } static void @@ -156,7 +155,8 @@ static void do_setup(struct net_device *netdev) netdev->priv_flags &= ~IFF_TX_SKB_SHARING; netdev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_OPENVSWITCH | IFF_PHONY_HEADROOM | IFF_NO_QUEUE; - netdev->destructor = internal_dev_destructor; + netdev->needs_free_netdev = true; + netdev->priv_destructor = internal_dev_destructor; netdev->ethtool_ops = &internal_dev_ethtool_ops; netdev->rtnl_link_ops = &internal_dev_link_ops; diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c index 21c28b51be94..2c9337946e30 100644 --- a/net/phonet/pep-gprs.c +++ b/net/phonet/pep-gprs.c @@ -236,7 +236,7 @@ static void gprs_setup(struct net_device *dev) dev->tx_queue_len = 10; dev->netdev_ops = &gprs_netdev_ops; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; } /* From 92e75428ffc90e2a0321062379f883f3671cfebe Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 7 Jun 2017 19:01:32 -0400 Subject: [PATCH 0570/1065] random: use lockless method of accessing and updating f->reg_idx Linus pointed out that there is a much more efficient way of avoiding the problem that we were trying to address in commit 9dfa7bba35ac0: "fix race in drivers/char/random.c:get_reg()". Signed-off-by: Theodore Ts'o --- drivers/char/random.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index a561f0c2f428..473ad34378f2 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1097,15 +1097,15 @@ static void add_interrupt_bench(cycles_t start) static __u32 get_reg(struct fast_pool *f, struct pt_regs *regs) { __u32 *ptr = (__u32 *) regs; - unsigned long flags; + unsigned int idx; if (regs == NULL) return 0; - local_irq_save(flags); - if (f->reg_idx >= sizeof(struct pt_regs) / sizeof(__u32)) - f->reg_idx = 0; - ptr += f->reg_idx++; - local_irq_restore(flags); + idx = READ_ONCE(f->reg_idx); + if (idx >= sizeof(struct pt_regs) / sizeof(__u32)) + idx = 0; + ptr += idx++; + WRITE_ONCE(f->reg_idx, idx); return *ptr; } From d89269a89ebb6a74512f3f40e89cd12017f60a75 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Sun, 7 May 2017 19:36:42 +0900 Subject: [PATCH 0571/1065] perf probe: Fix examples section of documentation An example in perf-probe documentation for pattern of function name based probe addition is not providing example command for that case. This commit fixes the example to give appropriate example command. Signed-off-by: SeongJae Park Acked-by: Masami Hiramatsu Cc: Peter Zijlstra Cc: Taeung Song Fixes: ee391de876ae ("perf probe: Update perf probe document") Link: http://lkml.kernel.org/r/20170507103642.30560-1-sj38.park@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/perf-probe.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt index e6c9902c6d82..165c2b1d4317 100644 --- a/tools/perf/Documentation/perf-probe.txt +++ b/tools/perf/Documentation/perf-probe.txt @@ -240,9 +240,13 @@ Add a probe on schedule() function 12th line with recording cpu local variable: or ./perf probe --add='schedule:12 cpu' - this will add one or more probes which has the name start with "schedule". +Add one or more probes which has the name start with "schedule". - Add probes on lines in schedule() function which calls update_rq_clock(). + ./perf probe schedule* + or + ./perf probe --add='schedule*' + +Add probes on lines in schedule() function which calls update_rq_clock(). ./perf probe 'schedule;update_rq_clock*' or From c76132dc5182776b98e946d674cb41c421661ea9 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Tue, 30 May 2017 20:18:23 +0900 Subject: [PATCH 0572/1065] perf script: Fix outdated comment for perf-trace-python Script generated by the '--gen-script' option contains an outdated comment. It mentions a 'perf-trace-python' document while it has been renamed to 'perf-script-python'. Fix it. Signed-off-by: SeongJae Park Cc: Alexander Shishkin Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 133dc4c39c57 ("perf: Rename 'perf trace' to 'perf script'") Link: http://lkml.kernel.org/r/20170530111827.21732-2-sj38.park@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/scripting-engines/trace-event-python.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c index 9d92af7d0718..40de3cb40d21 100644 --- a/tools/perf/util/scripting-engines/trace-event-python.c +++ b/tools/perf/util/scripting-engines/trace-event-python.c @@ -1219,7 +1219,7 @@ static int python_generate_script(struct pevent *pevent, const char *outfile) fprintf(ofp, "# be retrieved using Python functions of the form " "common_*(context).\n"); - fprintf(ofp, "# See the perf-trace-python Documentation for the list " + fprintf(ofp, "# See the perf-script-python Documentation for the list " "of available functions.\n\n"); fprintf(ofp, "import os\n"); From 34d4453dac257be53c21abf2f713c992fb692b5c Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Tue, 30 May 2017 20:18:24 +0900 Subject: [PATCH 0573/1065] perf script: Fix documentation errors This commit fixes two errors in documents for perf-script-python and perf-script-perl as below: - /sys/kernel/debug/tracing events -> /sys/kernel/debug/tracing/events/ - trace_handled -> trace_unhandled Signed-off-by: SeongJae Park Cc: Alexander Shishkin Cc: Frederic Weisbecker Cc: Peter Zijlstra Cc: Tom Zanussi Fixes: cff68e582237 ("perf/scripts: Add perf-trace-python Documentation") Link: http://lkml.kernel.org/r/20170530111827.21732-3-sj38.park@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/perf-script-perl.txt | 2 +- tools/perf/Documentation/perf-script-python.txt | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/Documentation/perf-script-perl.txt b/tools/perf/Documentation/perf-script-perl.txt index dfbb506d2c34..142606c0ec9c 100644 --- a/tools/perf/Documentation/perf-script-perl.txt +++ b/tools/perf/Documentation/perf-script-perl.txt @@ -39,7 +39,7 @@ EVENT HANDLERS When perf script is invoked using a trace script, a user-defined 'handler function' is called for each event in the trace. If there's no handler function defined for a given event type, the event is -ignored (or passed to a 'trace_handled' function, see below) and the +ignored (or passed to a 'trace_unhandled' function, see below) and the next event is processed. Most of the event's field values are passed as arguments to the diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt index 54acba221558..087b87c956ba 100644 --- a/tools/perf/Documentation/perf-script-python.txt +++ b/tools/perf/Documentation/perf-script-python.txt @@ -321,7 +321,7 @@ So those are the essential steps in writing and running a script. The process can be generalized to any tracepoint or set of tracepoints you're interested in - basically find the tracepoint(s) you're interested in by looking at the list of available events shown by -'perf list' and/or look in /sys/kernel/debug/tracing events for +'perf list' and/or look in /sys/kernel/debug/tracing/events/ for detailed event and field info, record the corresponding trace data using 'perf record', passing it the list of interesting events, generate a skeleton script using 'perf script -g python' and modify the @@ -437,7 +437,7 @@ EVENT HANDLERS When perf script is invoked using a trace script, a user-defined 'handler function' is called for each event in the trace. If there's no handler function defined for a given event type, the event is -ignored (or passed to a 'trace_handled' function, see below) and the +ignored (or passed to a 'trace_unhandled' function, see below) and the next event is processed. Most of the event's field values are passed as arguments to the From 26ddb8722df865aa67fbe459107d2f3f8e5c6829 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Tue, 30 May 2017 20:18:26 +0900 Subject: [PATCH 0574/1065] perf script python: Fix wrong code snippets in documentation This commit fixes wrong code snippets for trace_begin() and trace_end() function example definition. Signed-off-by: SeongJae Park Cc: Alexander Shishkin Cc: Frederic Weisbecker Cc: Peter Zijlstra Cc: Tom Zanussi Fixes: cff68e582237 ("perf/scripts: Add perf-trace-python Documentation") Link: http://lkml.kernel.org/r/20170530111827.21732-5-sj38.park@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/perf-script-python.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt index 087b87c956ba..bad6e93cceff 100644 --- a/tools/perf/Documentation/perf-script-python.txt +++ b/tools/perf/Documentation/perf-script-python.txt @@ -532,7 +532,7 @@ can implement a set of optional functions: gives scripts a chance to do setup tasks: ---- -def trace_begin: +def trace_begin(): pass ---- @@ -541,7 +541,7 @@ def trace_begin: as display results: ---- -def trace_end: +def trace_end(): pass ---- From 1bf8d5a4a5da19b1f6e7958fe67db4118fa7a1c1 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Tue, 30 May 2017 20:18:27 +0900 Subject: [PATCH 0575/1065] perf script python: Updated trace_unhandled() signature Default function signature of trace_unhandled() got changed to include a field dict, but its documentation, perf-script-python.txt has not been updated. Fix it. Signed-off-by: SeongJae Park Cc: Alexander Shishkin Cc: Peter Zijlstra Cc: Pierre Tardy Fixes: c02514850d67 ("perf scripts python: Give field dict to unhandled callback") Link: http://lkml.kernel.org/r/20170530111827.21732-6-sj38.park@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/perf-script-python.txt | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt index bad6e93cceff..378783fe2b6b 100644 --- a/tools/perf/Documentation/perf-script-python.txt +++ b/tools/perf/Documentation/perf-script-python.txt @@ -149,10 +149,8 @@ def raw_syscalls__sys_enter(event_name, context, common_cpu, print "id=%d, args=%s\n" % \ (id, args), -def trace_unhandled(event_name, context, common_cpu, common_secs, common_nsecs, - common_pid, common_comm): - print_header(event_name, common_cpu, common_secs, common_nsecs, - common_pid, common_comm) +def trace_unhandled(event_name, context, event_fields_dict): + print ' '.join(['%s=%s'%(k,str(v))for k,v in sorted(event_fields_dict.items())]) def print_header(event_name, cpu, secs, nsecs, pid, comm): print "%-20s %5u %05u.%09u %8u %-20s " % \ @@ -550,8 +548,7 @@ def trace_end(): of common arguments are passed into it: ---- -def trace_unhandled(event_name, context, common_cpu, common_secs, - common_nsecs, common_pid, common_comm): +def trace_unhandled(event_name, context, event_fields_dict): pass ---- From 14fc42fa1b3e7ea5160c84d0e686a3a0c1ffe619 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Tue, 30 May 2017 20:18:25 +0900 Subject: [PATCH 0576/1065] perf script python: Remove dups in documentation examples Few shell command examples in perf-script-python.txt has few nitpicks include: - tools/perf/scripts/python directory listing command is unnecessarily repeated. - few examples contain additional information in command prompt unnecessarily and inconsistently. This commit fixes them to enhance readability of the document. Signed-off-by: SeongJae Park Cc: Alexander Shishkin Cc: Frederic Weisbecker Cc: Peter Zijlstra Cc: Tom Zanussi Fixes: cff68e582237 ("perf/scripts: Add perf-trace-python Documentation") Link: http://lkml.kernel.org/r/20170530111827.21732-4-sj38.park@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/perf-script-python.txt | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt index 378783fe2b6b..51ec2d20068a 100644 --- a/tools/perf/Documentation/perf-script-python.txt +++ b/tools/perf/Documentation/perf-script-python.txt @@ -332,7 +332,7 @@ right place, you can have your script listed alongside the other scripts listed by the 'perf script -l' command e.g.: ---- -root@tropicana:~# perf script -l +# perf script -l List of available trace scripts: wakeup-latency system-wide min/max/avg wakeup latency rw-by-file r/w activity for a program, by file @@ -381,8 +381,6 @@ source tree: ---- # ls -al kernel-source/tools/perf/scripts/python - -root@tropicana:/home/trz/src/tip# ls -al tools/perf/scripts/python total 32 drwxr-xr-x 4 trz trz 4096 2010-01-26 22:30 . drwxr-xr-x 4 trz trz 4096 2010-01-26 22:29 .. @@ -397,7 +395,7 @@ otherwise your script won't show up at run-time), 'perf script -l' should show a new entry for your script: ---- -root@tropicana:~# perf script -l +# perf script -l List of available trace scripts: wakeup-latency system-wide min/max/avg wakeup latency rw-by-file r/w activity for a program, by file From b169c13de473a85b3c859bb36216a4cb5f00a54a Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 7 Jun 2017 19:45:31 -0400 Subject: [PATCH 0577/1065] random: invalidate batched entropy after crng init It's possible that get_random_{u32,u64} is used before the crng has initialized, in which case, its output might not be cryptographically secure. For this problem, directly, this patch set is introducing the *_wait variety of functions, but even with that, there's a subtle issue: what happens to our batched entropy that was generated before initialization. Prior to this commit, it'd stick around, supplying bad numbers. After this commit, we force the entropy to be re-extracted after each phase of the crng has initialized. In order to avoid a race condition with the position counter, we introduce a simple rwlock for this invalidation. Since it's only during this awkward transition period, after things are all set up, we stop using it, so that it doesn't have an impact on performance. Signed-off-by: Jason A. Donenfeld Cc: Greg Kroah-Hartman Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org # v4.11+ --- drivers/char/random.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/char/random.c b/drivers/char/random.c index 473ad34378f2..e870f329db88 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1,6 +1,9 @@ /* * random.c -- A strong random number generator * + * Copyright (C) 2017 Jason A. Donenfeld . All + * Rights Reserved. + * * Copyright Matt Mackall , 2003, 2004, 2005 * * Copyright Theodore Ts'o, 1994, 1995, 1996, 1997, 1998, 1999. All @@ -762,6 +765,8 @@ static DECLARE_WAIT_QUEUE_HEAD(crng_init_wait); static struct crng_state **crng_node_pool __read_mostly; #endif +static void invalidate_batched_entropy(void); + static void crng_initialize(struct crng_state *crng) { int i; @@ -799,6 +804,7 @@ static int crng_fast_load(const char *cp, size_t len) cp++; crng_init_cnt++; len--; } if (crng_init_cnt >= CRNG_INIT_CNT_THRESH) { + invalidate_batched_entropy(); crng_init = 1; wake_up_interruptible(&crng_init_wait); pr_notice("random: fast init done\n"); @@ -836,6 +842,7 @@ static void crng_reseed(struct crng_state *crng, struct entropy_store *r) memzero_explicit(&buf, sizeof(buf)); crng->init_time = jiffies; if (crng == &primary_crng && crng_init < 2) { + invalidate_batched_entropy(); crng_init = 2; process_random_ready_list(); wake_up_interruptible(&crng_init_wait); @@ -2023,6 +2030,7 @@ struct batched_entropy { }; unsigned int position; }; +static rwlock_t batched_entropy_reset_lock = __RW_LOCK_UNLOCKED(batched_entropy_reset_lock); /* * Get a random word for internal kernel use only. The quality of the random @@ -2033,6 +2041,8 @@ static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u64); u64 get_random_u64(void) { u64 ret; + bool use_lock = crng_init < 2; + unsigned long flags; struct batched_entropy *batch; #if BITS_PER_LONG == 64 @@ -2045,11 +2055,15 @@ u64 get_random_u64(void) #endif batch = &get_cpu_var(batched_entropy_u64); + if (use_lock) + read_lock_irqsave(&batched_entropy_reset_lock, flags); if (batch->position % ARRAY_SIZE(batch->entropy_u64) == 0) { extract_crng((u8 *)batch->entropy_u64); batch->position = 0; } ret = batch->entropy_u64[batch->position++]; + if (use_lock) + read_unlock_irqrestore(&batched_entropy_reset_lock, flags); put_cpu_var(batched_entropy_u64); return ret; } @@ -2059,22 +2073,45 @@ static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u32); u32 get_random_u32(void) { u32 ret; + bool use_lock = crng_init < 2; + unsigned long flags; struct batched_entropy *batch; if (arch_get_random_int(&ret)) return ret; batch = &get_cpu_var(batched_entropy_u32); + if (use_lock) + read_lock_irqsave(&batched_entropy_reset_lock, flags); if (batch->position % ARRAY_SIZE(batch->entropy_u32) == 0) { extract_crng((u8 *)batch->entropy_u32); batch->position = 0; } ret = batch->entropy_u32[batch->position++]; + if (use_lock) + read_unlock_irqrestore(&batched_entropy_reset_lock, flags); put_cpu_var(batched_entropy_u32); return ret; } EXPORT_SYMBOL(get_random_u32); +/* It's important to invalidate all potential batched entropy that might + * be stored before the crng is initialized, which we can do lazily by + * simply resetting the counter to zero so that it's re-extracted on the + * next usage. */ +static void invalidate_batched_entropy(void) +{ + int cpu; + unsigned long flags; + + write_lock_irqsave(&batched_entropy_reset_lock, flags); + for_each_possible_cpu (cpu) { + per_cpu_ptr(&batched_entropy_u32, cpu)->position = 0; + per_cpu_ptr(&batched_entropy_u64, cpu)->position = 0; + } + write_unlock_irqrestore(&batched_entropy_reset_lock, flags); +} + /** * randomize_page - Generate a random, page aligned address * @start: The smallest acceptable address the caller will take. From 462c5a826eba39fad819ccef916f9943ff42bf0d Mon Sep 17 00:00:00 2001 From: Jessica Yu Date: Wed, 7 Jun 2017 23:52:36 -0700 Subject: [PATCH 0578/1065] MAINTAINERS: update email address for Jessica Yu I will be traveling in the upcoming months and it'll be much easier for me to access my kernel.org email rather than my work one. Change my email address in the MAINTAINERS file from jeyu@redhat.com to jeyu@kernel.org. Signed-off-by: Jessica Yu --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 053c3bdd1fe5..4c3051018744 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7707,7 +7707,7 @@ F: drivers/platform/x86/hp_accel.c LIVE PATCHING M: Josh Poimboeuf -M: Jessica Yu +M: Jessica Yu M: Jiri Kosina M: Miroslav Benes R: Petr Mladek @@ -8588,7 +8588,7 @@ S: Maintained F: drivers/media/dvb-frontends/mn88473* MODULE SUPPORT -M: Jessica Yu +M: Jessica Yu M: Rusty Russell T: git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next S: Maintained From 5b0bc9ac2ce4881ee318a21f31140584ce4dbdad Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Wed, 7 Jun 2017 11:58:19 +0200 Subject: [PATCH 0579/1065] x86/microcode/intel: Clear patch pointer before jettisoning the initrd During early boot, load_ucode_intel_ap() uses __load_ucode_intel() to obtain a pointer to the relevant microcode patch (embedded in the initrd), and stores this value in 'intel_ucode_patch' to speed up the microcode patch application for subsequent CPUs. On resuming from suspend-to-RAM, however, load_ucode_ap() calls load_ucode_intel_ap() for each non-boot-CPU. By then the initramfs is long gone so the pointer stored in 'intel_ucode_patch' no longer points to a valid microcode patch. Clear that pointer so that we effectively fall back to the CPU hotplug notifier callbacks to update the microcode. Signed-off-by: Dominik Brodowski [ Edit and massage commit message. ] Signed-off-by: Borislav Petkov Cc: # 4.10.. Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20170607095819.9754-1-bp@alien8.de Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/microcode/intel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c index afdfd237b59f..f522415bf9e5 100644 --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -619,6 +619,9 @@ int __init save_microcode_in_initrd_intel(void) show_saved_mc(); + /* initrd is going away, clear patch ptr. */ + intel_ucode_patch = NULL; + return 0; } From cc1582c231ea041fbc68861dfaf957eaf902b829 Mon Sep 17 00:00:00 2001 From: Jin Yao Date: Thu, 25 May 2017 18:09:07 +0800 Subject: [PATCH 0580/1065] perf/core: Drop kernel samples even though :u is specified When doing sampling, for example: perf record -e cycles:u ... On workloads that do a lot of kernel entry/exits we see kernel samples, even though :u is specified. This is due to skid existing. This might be a security issue because it can leak kernel addresses even though kernel sampling support is disabled. The patch drops the kernel samples if exclude_kernel is specified. For example, test on Haswell desktop: perf record -e cycles:u perf report --stdio Before patch applied: 99.77% mgen mgen [.] buf_read 0.20% mgen mgen [.] rand_buf_init 0.01% mgen [kernel.vmlinux] [k] apic_timer_interrupt 0.00% mgen mgen [.] last_free_elem 0.00% mgen libc-2.23.so [.] __random_r 0.00% mgen libc-2.23.so [.] _int_malloc 0.00% mgen mgen [.] rand_array_init 0.00% mgen [kernel.vmlinux] [k] page_fault 0.00% mgen libc-2.23.so [.] __random 0.00% mgen libc-2.23.so [.] __strcasestr 0.00% mgen ld-2.23.so [.] strcmp 0.00% mgen ld-2.23.so [.] _dl_start 0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4 0.00% mgen ld-2.23.so [.] _start We can see kernel symbols apic_timer_interrupt and page_fault. After patch applied: 99.79% mgen mgen [.] buf_read 0.19% mgen mgen [.] rand_buf_init 0.00% mgen libc-2.23.so [.] __random_r 0.00% mgen mgen [.] rand_array_init 0.00% mgen mgen [.] last_free_elem 0.00% mgen libc-2.23.so [.] vfprintf 0.00% mgen libc-2.23.so [.] rand 0.00% mgen libc-2.23.so [.] __random 0.00% mgen libc-2.23.so [.] _int_malloc 0.00% mgen libc-2.23.so [.] _IO_doallocbuf 0.00% mgen ld-2.23.so [.] do_lookup_x 0.00% mgen ld-2.23.so [.] open_verify.constprop.7 0.00% mgen ld-2.23.so [.] _dl_important_hwcaps 0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4 0.00% mgen ld-2.23.so [.] _start There are only userspace symbols. Signed-off-by: Jin Yao Signed-off-by: Peter Zijlstra (Intel) Cc: Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: acme@kernel.org Cc: jolsa@kernel.org Cc: kan.liang@intel.com Cc: mark.rutland@arm.com Cc: will.deacon@arm.com Cc: yao.jin@intel.com Link: http://lkml.kernel.org/r/1495706947-3744-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index 6e75a5c9412d..6c4e523dc1e2 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -7316,6 +7316,21 @@ int perf_event_account_interrupt(struct perf_event *event) return __perf_event_account_interrupt(event, 1); } +static bool sample_is_allowed(struct perf_event *event, struct pt_regs *regs) +{ + /* + * Due to interrupt latency (AKA "skid"), we may enter the + * kernel before taking an overflow, even if the PMU is only + * counting user events. + * To avoid leaking information to userspace, we must always + * reject kernel samples when exclude_kernel is set. + */ + if (event->attr.exclude_kernel && !user_mode(regs)) + return false; + + return true; +} + /* * Generic event overflow handling, sampling. */ @@ -7336,6 +7351,12 @@ static int __perf_event_overflow(struct perf_event *event, ret = __perf_event_account_interrupt(event, throttle); + /* + * For security, drop the skid kernel samples if necessary. + */ + if (!sample_is_allowed(event, regs)) + return ret; + /* * XXX event_limit might not quite work as expected on inherited * events From d41519a69b35b10af7fda867fb9100df24fdf403 Mon Sep 17 00:00:00 2001 From: David Miller Date: Fri, 2 Jun 2017 11:28:54 -0400 Subject: [PATCH 0581/1065] crypto: Work around deallocated stack frame reference gcc bug on sparc. On sparc, if we have an alloca() like situation, as is the case with SHASH_DESC_ON_STACK(), we can end up referencing deallocated stack memory. The result can be that the value is clobbered if a trap or interrupt arrives at just the right instruction. It only occurs if the function ends returning a value from that alloca() area and that value can be placed into the return value register using a single instruction. For example, in lib/libcrc32c.c:crc32c() we end up with a return sequence like: return %i7+8 lduw [%o5+16], %o0 ! MEM[(u32 *)__shash_desc.1_10 + 16B], %o5 holds the base of the on-stack area allocated for the shash descriptor. But the return released the stack frame and the register window. So if an intererupt arrives between 'return' and 'lduw', then the value read at %o5+16 can be corrupted. Add a data compiler barrier to work around this problem. This is exactly what the gcc fix will end up doing as well, and it absolutely should not change the code generated for other cpus (unless gcc on them has the same bug :-) With crucial insight from Eric Sandeen. Cc: Reported-by: Anatoly Pugachev Signed-off-by: David S. Miller Signed-off-by: Herbert Xu --- drivers/infiniband/sw/rxe/rxe.h | 5 ++++- fs/btrfs/hash.c | 5 ++++- fs/f2fs/f2fs.h | 5 ++++- lib/libcrc32c.c | 6 ++++-- 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/sw/rxe/rxe.h b/drivers/infiniband/sw/rxe/rxe.h index ecdba2fce083..1ac5b8551a4d 100644 --- a/drivers/infiniband/sw/rxe/rxe.h +++ b/drivers/infiniband/sw/rxe/rxe.h @@ -68,6 +68,7 @@ static inline u32 rxe_crc32(struct rxe_dev *rxe, u32 crc, void *next, size_t len) { + u32 retval; int err; SHASH_DESC_ON_STACK(shash, rxe->tfm); @@ -81,7 +82,9 @@ static inline u32 rxe_crc32(struct rxe_dev *rxe, return crc32_le(crc, next, len); } - return *(u32 *)shash_desc_ctx(shash); + retval = *(u32 *)shash_desc_ctx(shash); + barrier_data(shash_desc_ctx(shash)); + return retval; } int rxe_set_mtu(struct rxe_dev *rxe, unsigned int dev_mtu); diff --git a/fs/btrfs/hash.c b/fs/btrfs/hash.c index a97fdc156a03..baacc1866861 100644 --- a/fs/btrfs/hash.c +++ b/fs/btrfs/hash.c @@ -38,6 +38,7 @@ u32 btrfs_crc32c(u32 crc, const void *address, unsigned int length) { SHASH_DESC_ON_STACK(shash, tfm); u32 *ctx = (u32 *)shash_desc_ctx(shash); + u32 retval; int err; shash->tfm = tfm; @@ -47,5 +48,7 @@ u32 btrfs_crc32c(u32 crc, const void *address, unsigned int length) err = crypto_shash_update(shash, address, length); BUG_ON(err); - return *ctx; + retval = *ctx; + barrier_data(ctx); + return retval; } diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 2185c7a040a1..fd2e651bad6d 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -1078,6 +1078,7 @@ static inline u32 f2fs_crc32(struct f2fs_sb_info *sbi, const void *address, { SHASH_DESC_ON_STACK(shash, sbi->s_chksum_driver); u32 *ctx = (u32 *)shash_desc_ctx(shash); + u32 retval; int err; shash->tfm = sbi->s_chksum_driver; @@ -1087,7 +1088,9 @@ static inline u32 f2fs_crc32(struct f2fs_sb_info *sbi, const void *address, err = crypto_shash_update(shash, address, length); BUG_ON(err); - return *ctx; + retval = *ctx; + barrier_data(ctx); + return retval; } static inline bool f2fs_crc_valid(struct f2fs_sb_info *sbi, __u32 blk_crc, diff --git a/lib/libcrc32c.c b/lib/libcrc32c.c index 74a54b7f2562..9f79547d1b97 100644 --- a/lib/libcrc32c.c +++ b/lib/libcrc32c.c @@ -43,7 +43,7 @@ static struct crypto_shash *tfm; u32 crc32c(u32 crc, const void *address, unsigned int length) { SHASH_DESC_ON_STACK(shash, tfm); - u32 *ctx = (u32 *)shash_desc_ctx(shash); + u32 ret, *ctx = (u32 *)shash_desc_ctx(shash); int err; shash->tfm = tfm; @@ -53,7 +53,9 @@ u32 crc32c(u32 crc, const void *address, unsigned int length) err = crypto_shash_update(shash, address, length); BUG_ON(err); - return *ctx; + ret = *ctx; + barrier_data(ctx); + return ret; } EXPORT_SYMBOL(crc32c); From dac8bbbae1d0ccba96402d25deeed3a2e87992c6 Mon Sep 17 00:00:00 2001 From: Petr Mladek Date: Thu, 8 Jun 2017 12:01:30 +0200 Subject: [PATCH 0582/1065] Revert "printk: fix double printing with earlycon" This reverts commit cf39bf58afdaabc0b86f141630fb3fd18190294e. The commit regression to users that define both console=ttyS1 and console=ttyS0 on the command line, see https://lkml.kernel.org/r/20170509082915.GA13236@bistromath.localdomain The kernel log messages always appeared only on one serial port. It is even documented in Documentation/admin-guide/serial-console.rst: "Note that you can only define one console per device type (serial, video)." The above mentioned commit changed the order in which the command line parameters are searched. As a result, the kernel log messages go to the last mentioned ttyS* instead of the first one. We long thought that using two console=ttyS* on the command line did not make sense. But then we realized that console= parameters were handled also by systemd, see http://0pointer.de/blog/projects/serial-console.html "By default systemd will instantiate one serial-getty@.service on the main kernel console, if it is not a virtual terminal." where "[4] If multiple kernel consoles are used simultaneously, the main console is the one listed first in /sys/class/tty/console/active, which is the last one listed on the kernel command line." This puts the original report into another light. The system is running in qemu. The first serial port is used to store the messages into a file. The second one is used to login to the system via a socket. It depends on systemd and the historic kernel behavior. By other words, systemd causes that it makes sense to define both console=ttyS1 console=ttyS0 on the command line. The kernel fix caused regression related to userspace (systemd) and need to be reverted. In addition, it went out that the fix helped only partially. The messages still were duplicated when the boot console was removed early by late_initcall(printk_late_init). Then the entire log was replayed when the same console was registered as a normal one. Link: 20170606160339.GC7604@pathway.suse.cz Cc: Aleksey Makarov Cc: Sabrina Dubroca Cc: Sudeep Holla Cc: Greg Kroah-Hartman Cc: Peter Hurley Cc: Jiri Slaby Cc: Robin Murphy , Cc: Steven Rostedt Cc: "Nair, Jayachandran" Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-by: Sabrina Dubroca Acked-by: Sergey Senozhatsky Signed-off-by: Petr Mladek --- kernel/printk/printk.c | 46 +++++++++--------------------------------- 1 file changed, 10 insertions(+), 36 deletions(-) diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 779479ac9f57..9dbceb76e6bc 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -269,7 +269,6 @@ static struct console *exclusive_console; #define MAX_CMDLINECONSOLES 8 static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES]; -static int console_cmdline_cnt; static int preferred_console = -1; int console_set_on_cmdline; @@ -1906,25 +1905,12 @@ static int __add_preferred_console(char *name, int idx, char *options, * See if this tty is not yet registered, and * if we have a slot free. */ - for (i = 0, c = console_cmdline; i < console_cmdline_cnt; i++, c++) { + for (i = 0, c = console_cmdline; + i < MAX_CMDLINECONSOLES && c->name[0]; + i++, c++) { if (strcmp(c->name, name) == 0 && c->index == idx) { - if (brl_options) - return 0; - - /* - * Maintain an invariant that will help to find if - * the matching console is preferred, see - * register_console(): - * - * The last non-braille console is always - * the preferred one. - */ - if (i != console_cmdline_cnt - 1) - swap(console_cmdline[i], - console_cmdline[console_cmdline_cnt - 1]); - - preferred_console = console_cmdline_cnt - 1; - + if (!brl_options) + preferred_console = i; return 0; } } @@ -1937,7 +1923,6 @@ static int __add_preferred_console(char *name, int idx, char *options, braille_set_options(c, brl_options); c->index = idx; - console_cmdline_cnt++; return 0; } /* @@ -2477,23 +2462,12 @@ void register_console(struct console *newcon) } /* - * See if this console matches one we selected on the command line. - * - * There may be several entries in the console_cmdline array matching - * with the same console, one with newcon->match(), another by - * name/index: - * - * pl011,mmio,0x87e024000000,115200 -- added from SPCR - * ttyAMA0 -- added from command line - * - * Traverse the console_cmdline array in reverse order to be - * sure that if this console is preferred then it will be the first - * matching entry. We use the invariant that is maintained in - * __add_preferred_console(). + * See if this console matches one we selected on + * the command line. */ - for (i = console_cmdline_cnt - 1; i >= 0; i--) { - c = console_cmdline + i; - + for (i = 0, c = console_cmdline; + i < MAX_CMDLINECONSOLES && c->name[0]; + i++, c++) { if (!newcon->match || newcon->match(newcon, c->name, c->index, c->options) != 0) { /* default matching */ From b94aac64a4c17c5af92f9b4ba7164c5b384d5c02 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 7 Jun 2017 12:07:51 -0300 Subject: [PATCH 0583/1065] [media] cec: race fix: don't return -ENONET in cec_receive() When calling CEC_RECEIVE do not check if the adapter is configured. Typically CEC_RECEIVE is called after a select() and if that indicates that there are messages in the receive queue, then you should always be able to dequeue a message. The race condition here is that a message has been received and is queued, so select() tells userspace that a message is available. But before the application calls CEC_RECEIVE the adapter is unconfigured (e.g. the HDMI cable is removed). Now select will always report that there is a message, but calling CEC_RECEIVE will always return -ENONET because the adapter is no longer configured and so will never actually dequeue the message. There is really no need for this check, and in fact the ENONET error code was never documented for CEC_RECEIVE. This may have been a left-over of old code that was never updated. Signed-off-by: Hans Verkuil Cc: # for v4.10 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/cec-api.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/media/cec/cec-api.c b/drivers/media/cec/cec-api.c index 0860fb458757..999926f731c8 100644 --- a/drivers/media/cec/cec-api.c +++ b/drivers/media/cec/cec-api.c @@ -271,16 +271,10 @@ static long cec_receive(struct cec_adapter *adap, struct cec_fh *fh, bool block, struct cec_msg __user *parg) { struct cec_msg msg = {}; - long err = 0; + long err; if (copy_from_user(&msg, parg, sizeof(msg))) return -EFAULT; - mutex_lock(&adap->lock); - if (!adap->is_configured && fh->mode_follower < CEC_MODE_MONITOR) - err = -ENONET; - mutex_unlock(&adap->lock); - if (err) - return err; err = cec_receive_msg(fh, &msg, block); if (err) From cec422c11caeeccae709e9942058b6b644ce434c Mon Sep 17 00:00:00 2001 From: Frederic Barrat Date: Tue, 6 Jun 2017 11:43:41 +0200 Subject: [PATCH 0584/1065] cxl: Fix error path on bad ioctl Fix error path if we can't copy user structure on CXL_IOCTL_START_WORK ioctl. We shouldn't unlock the context status mutex as it was not locked (yet). Fixes: 0712dc7e73e5 ("cxl: Fix issues when unmapping contexts") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Frederic Barrat Reviewed-by: Vaibhav Jain Reviewed-by: Andrew Donnellan Signed-off-by: Michael Ellerman --- drivers/misc/cxl/file.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c index 17b433f1ce23..0761271d68c5 100644 --- a/drivers/misc/cxl/file.c +++ b/drivers/misc/cxl/file.c @@ -159,11 +159,8 @@ static long afu_ioctl_start_work(struct cxl_context *ctx, /* Do this outside the status_mutex to avoid a circular dependency with * the locking in cxl_mmap_fault() */ - if (copy_from_user(&work, uwork, - sizeof(struct cxl_ioctl_start_work))) { - rc = -EFAULT; - goto out; - } + if (copy_from_user(&work, uwork, sizeof(work))) + return -EFAULT; mutex_lock(&ctx->status_mutex); if (ctx->status != OPENED) { From 92d9dfda8b547cc292af27e11e11c9eff3bb574f Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 1 Jun 2017 20:05:04 +0530 Subject: [PATCH 0585/1065] powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space Supporting 512TB requires us to do a order 3 allocation for level 1 page table (pgd). This results in page allocation failures with certain workloads. For now limit 4k linux page size config to 64TB. Fixes: f6eedbba7a26 ("powerpc/mm/hash: Increase VA range to 128TB") Reported-by: Hugh Dickins Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/book3s/64/hash-4k.h | 2 +- arch/powerpc/include/asm/processor.h | 25 ++++++++++---------- arch/powerpc/kernel/setup-common.c | 2 +- arch/powerpc/mm/mmu_context_book3s64.c | 2 +- 4 files changed, 15 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h index b4b5e6b671ca..0c4e470571ca 100644 --- a/arch/powerpc/include/asm/book3s/64/hash-4k.h +++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h @@ -8,7 +8,7 @@ #define H_PTE_INDEX_SIZE 9 #define H_PMD_INDEX_SIZE 7 #define H_PUD_INDEX_SIZE 9 -#define H_PGD_INDEX_SIZE 12 +#define H_PGD_INDEX_SIZE 9 #ifndef __ASSEMBLY__ #define H_PTE_TABLE_SIZE (sizeof(pte_t) << H_PTE_INDEX_SIZE) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index a2123f291ab0..bb99b651085a 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -110,13 +110,18 @@ void release_thread(struct task_struct *); #define TASK_SIZE_128TB (0x0000800000000000UL) #define TASK_SIZE_512TB (0x0002000000000000UL) -#ifdef CONFIG_PPC_BOOK3S_64 +/* + * For now 512TB is only supported with book3s and 64K linux page size. + */ +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_64K_PAGES) /* * Max value currently used: */ -#define TASK_SIZE_USER64 TASK_SIZE_512TB +#define TASK_SIZE_USER64 TASK_SIZE_512TB +#define DEFAULT_MAP_WINDOW_USER64 TASK_SIZE_128TB #else -#define TASK_SIZE_USER64 TASK_SIZE_64TB +#define TASK_SIZE_USER64 TASK_SIZE_64TB +#define DEFAULT_MAP_WINDOW_USER64 TASK_SIZE_64TB #endif /* @@ -132,7 +137,7 @@ void release_thread(struct task_struct *); * space during mmap's. */ #define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4)) -#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_128TB / 4)) +#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(DEFAULT_MAP_WINDOW_USER64 / 4)) #define TASK_UNMAPPED_BASE ((is_32bit_task()) ? \ TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 ) @@ -143,21 +148,15 @@ void release_thread(struct task_struct *); * with 128TB and conditionally enable upto 512TB */ #ifdef CONFIG_PPC_BOOK3S_64 -#define DEFAULT_MAP_WINDOW ((is_32bit_task()) ? \ - TASK_SIZE_USER32 : TASK_SIZE_128TB) +#define DEFAULT_MAP_WINDOW ((is_32bit_task()) ? \ + TASK_SIZE_USER32 : DEFAULT_MAP_WINDOW_USER64) #else #define DEFAULT_MAP_WINDOW TASK_SIZE #endif #ifdef __powerpc64__ -#ifdef CONFIG_PPC_BOOK3S_64 -/* Limit stack to 128TB */ -#define STACK_TOP_USER64 TASK_SIZE_128TB -#else -#define STACK_TOP_USER64 TASK_SIZE_USER64 -#endif - +#define STACK_TOP_USER64 DEFAULT_MAP_WINDOW_USER64 #define STACK_TOP_USER32 TASK_SIZE_USER32 #define STACK_TOP (is_32bit_task() ? \ diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 71dcda91755d..857129acf960 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -928,7 +928,7 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_PPC_MM_SLICES #ifdef CONFIG_PPC64 - init_mm.context.addr_limit = TASK_SIZE_128TB; + init_mm.context.addr_limit = DEFAULT_MAP_WINDOW_USER64; #else #error "context.addr_limit not initialized." #endif diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c index c6dca2ae78ef..a3edf813d455 100644 --- a/arch/powerpc/mm/mmu_context_book3s64.c +++ b/arch/powerpc/mm/mmu_context_book3s64.c @@ -99,7 +99,7 @@ static int hash__init_new_context(struct mm_struct *mm) * mm->context.addr_limit. Default to max task size so that we copy the * default values to paca which will help us to handle slb miss early. */ - mm->context.addr_limit = TASK_SIZE_128TB; + mm->context.addr_limit = DEFAULT_MAP_WINDOW_USER64; /* * The old code would re-promote on fork, we don't do that when using From c6ee9619e2edd9912316f7e2eaf9ffa14fafe9f9 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Jun 2017 16:29:59 +1000 Subject: [PATCH 0586/1065] powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default The PPC_DT_CPU_FTRs is a bit misplaced in menuconfig, it shows up with other general kernel options. It's really more at home in the "Platform Support" section, so move it there. Also enable it by default, for Book3s 64. It does mostly nothing unless the device tree properties are found, and we will want it enabled eventually in distro kernels, so turn it on to start getting more testing. Fixes: 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features") Signed-off-by: Michael Ellerman --- arch/powerpc/Kconfig | 11 ----------- arch/powerpc/platforms/Kconfig | 11 +++++++++++ 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4a4a05afcaf7..964da1891ea9 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -380,17 +380,6 @@ source "arch/powerpc/platforms/Kconfig" menu "Kernel options" -config PPC_DT_CPU_FTRS - bool "Device-tree based CPU feature discovery & setup" - depends on PPC_BOOK3S_64 - default n - help - This enables code to use a new device tree binding for describing CPU - compatibility and features. Saying Y here will attempt to use the new - binding if the firmware provides it. Currently only the skiboot - firmware provides this binding. - If you're not sure say Y. - config HIGHMEM bool "High memory support" depends on PPC32 diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 33244e3d9375..4fd64d3f5c44 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -59,6 +59,17 @@ config PPC_OF_BOOT_TRAMPOLINE In case of doubt, say Y +config PPC_DT_CPU_FTRS + bool "Device-tree based CPU feature discovery & setup" + depends on PPC_BOOK3S_64 + default y + help + This enables code to use a new device tree binding for describing CPU + compatibility and features. Saying Y here will attempt to use the new + binding if the firmware provides it. Currently only the skiboot + firmware provides this binding. + If you're not sure say Y. + config UDBG_RTAS_CONSOLE bool "RTAS based debug console" depends on PPC_RTAS From f7a31b5e7874f77464a4eae0a8ba84b9ae0b3a54 Mon Sep 17 00:00:00 2001 From: Marcin Nowakowski Date: Wed, 19 Apr 2017 14:07:43 +0200 Subject: [PATCH 0587/1065] MIPS: perf: Remove incorrect odd/even counter handling for I6400 All performance counters on I6400 (odd and even) are capable of counting any of the available events, so drop current logic of using the extra bit to determine which counter to use. Signed-off-by: Marcin Nowakowski Fixes: 4e88a8621301 ("MIPS: Add cases for CPU_I6400") Fixes: fd716fca10fc ("MIPS: perf: Fix I6400 event numbers") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15991/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/perf_event_mipsxx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 313a88b2973f..f3e301f95aef 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -1597,7 +1597,6 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) break; case CPU_P5600: case CPU_P6600: - case CPU_I6400: /* 8-bit event numbers */ raw_id = config & 0x1ff; base_id = raw_id & 0xff; @@ -1610,6 +1609,11 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) raw_event.range = P; #endif break; + case CPU_I6400: + /* 8-bit event numbers */ + base_id = config & 0xff; + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + break; case CPU_1004K: if (IS_BOTH_COUNTERS_1004K_EVENT(base_id)) raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; From 71eb989ab5a110df8bcbb9609bacde73feacbedd Mon Sep 17 00:00:00 2001 From: Marcin Nowakowski Date: Tue, 11 Apr 2017 09:00:34 +0200 Subject: [PATCH 0588/1065] MIPS: mm: fixed mappings: correct initialisation fixrange_init operates at PMD-granularity and expects the addresses to be PMD-size aligned, but currently that might not be the case for PKMAP_BASE unless it is defined properly, so ensure a correct alignment is used before passing the address to fixrange_init. fixed mappings: only align the start address that is passed to fixrange_init rather than the value before adding the size, as we may end up with uninitialised upper part of the range. Signed-off-by: Marcin Nowakowski Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15948/ Signed-off-by: Ralf Baechle --- arch/mips/mm/pgtable-32.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c index adc6911ba748..b19a3c506b1e 100644 --- a/arch/mips/mm/pgtable-32.c +++ b/arch/mips/mm/pgtable-32.c @@ -51,15 +51,15 @@ void __init pagetable_init(void) /* * Fixed mappings: */ - vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; - fixrange_init(vaddr, vaddr + FIXADDR_SIZE, pgd_base); + vaddr = __fix_to_virt(__end_of_fixed_addresses - 1); + fixrange_init(vaddr & PMD_MASK, vaddr + FIXADDR_SIZE, pgd_base); #ifdef CONFIG_HIGHMEM /* * Permanent kmaps: */ vaddr = PKMAP_BASE; - fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); + fixrange_init(vaddr & PMD_MASK, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); pgd = swapper_pg_dir + __pgd_offset(vaddr); pud = pud_offset(pgd, vaddr); From 725a269b3dd149f36c206c218253336774ef26f5 Mon Sep 17 00:00:00 2001 From: Marcin Nowakowski Date: Tue, 11 Apr 2017 09:00:35 +0200 Subject: [PATCH 0589/1065] MIPS: highmem: ensure that we don't use more than one page for PTEs All PTEs used by PKMAP should be allocated in a contiguous memory area, but we do not currently have a mechanism to enforce that, so ensure that we don't try to allocate more entries than would fit in a single page. Current fixed value of 1024 would not work with XPA enabled when sizeof(pte_t)==8 and we need two pages to store pte tables. Signed-off-by: Marcin Nowakowski Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15949/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/highmem.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h index d34536e7653f..279b6d14ffeb 100644 --- a/arch/mips/include/asm/highmem.h +++ b/arch/mips/include/asm/highmem.h @@ -35,7 +35,12 @@ extern pte_t *pkmap_page_table; * easily, subsequent pte tables have to be allocated in one physical * chunk of RAM. */ +#ifdef CONFIG_PHYS_ADDR_T_64BIT +#define LAST_PKMAP 512 +#else #define LAST_PKMAP 1024 +#endif + #define LAST_PKMAP_MASK (LAST_PKMAP-1) #define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) #define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) From c56e7a4c3e77f6fbd9b55c06c14eda65aae58958 Mon Sep 17 00:00:00 2001 From: Marcin Nowakowski Date: Tue, 11 Apr 2017 09:00:36 +0200 Subject: [PATCH 0590/1065] MIPS: mm: adjust PKMAP location Space reserved for PKMap should span from PKMAP_BASE to FIXADDR_START. For large page sizes this is not the case as eg. for 64k pages the range currently defined is from 0xfe000000 to 0x102000000(!!) which obviously isn't right. Remove the hardcoded location and set the BASE address as an offset from FIXADDR_START. Since all PKMAP ptes have to be placed in a contiguous memory, ensure that this is the case by placing them all in a single page. This is achieved by aligning the end address to pkmap pages count pages. Signed-off-by: Marcin Nowakowski Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15950/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/pgtable-32.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h index 6f94bed571c4..74afe8c76bdd 100644 --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -19,6 +19,10 @@ #define __ARCH_USE_5LEVEL_HACK #include +#ifdef CONFIG_HIGHMEM +#include +#endif + extern int temp_tlb_entry; /* @@ -62,7 +66,8 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, #define VMALLOC_START MAP_BASE -#define PKMAP_BASE (0xfe000000UL) +#define PKMAP_END ((FIXADDR_START) & ~((LAST_PKMAP << PAGE_SHIFT)-1)) +#define PKMAP_BASE (PKMAP_END - PAGE_SIZE * LAST_PKMAP) #ifdef CONFIG_HIGHMEM # define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE) From 87051ec120bb9abd9e57aecf2569c00d587b6f33 Mon Sep 17 00:00:00 2001 From: Marcin Nowakowski Date: Tue, 23 May 2017 12:56:43 +0200 Subject: [PATCH 0591/1065] MIPS: ftrace: fix init functions tracing Since introduction of tracing for init functions the in_kernel_space() check is no longer correct, as it ignores the init sections. As a result, when probes are inserted (and disabled) in the init functions, a branch instruction is inserted instead of a nop, which is likely to result in random crashes during boot. Remove the MIPS-specific in_kernel_space() method and replace it with a generic core_kernel_text() that also checks for init sections during system boot stage. Fixes: 42c269c88dc1 ("ftrace: Allow for function tracing to record init functions on boot up") Signed-off-by: Marcin Nowakowski Tested-by: Matt Redfearn Cc: Steven Rostedt Cc: Ingo Molnar Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16092/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/ftrace.c | 24 +++++------------------- 1 file changed, 5 insertions(+), 19 deletions(-) diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index 30a3b75e88eb..9d9b8fbae202 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -38,20 +38,6 @@ void arch_ftrace_update_code(int command) #endif -/* - * Check if the address is in kernel space - * - * Clone core_kernel_text() from kernel/extable.c, but doesn't call - * init_kernel_text() for Ftrace doesn't trace functions in init sections. - */ -static inline int in_kernel_space(unsigned long ip) -{ - if (ip >= (unsigned long)_stext && - ip <= (unsigned long)_etext) - return 1; - return 0; -} - #ifdef CONFIG_DYNAMIC_FTRACE #define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */ @@ -198,7 +184,7 @@ int ftrace_make_nop(struct module *mod, * If ip is in kernel space, no long call, otherwise, long call is * needed. */ - new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F; + new = core_kernel_text(ip) ? INSN_NOP : INSN_B_1F; #ifdef CONFIG_64BIT return ftrace_modify_code(ip, new); #else @@ -218,12 +204,12 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) unsigned int new; unsigned long ip = rec->ip; - new = in_kernel_space(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0]; + new = core_kernel_text(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0]; #ifdef CONFIG_64BIT return ftrace_modify_code(ip, new); #else - return ftrace_modify_code_2r(ip, new, in_kernel_space(ip) ? + return ftrace_modify_code_2r(ip, new, core_kernel_text(ip) ? INSN_NOP : insn_la_mcount[1]); #endif } @@ -289,7 +275,7 @@ unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long * instruction "lui v1, hi_16bit_of_mcount"(offset is 24), but for * kernel, move after the instruction "move ra, at"(offset is 16) */ - ip = self_ra - (in_kernel_space(self_ra) ? 16 : 24); + ip = self_ra - (core_kernel_text(self_ra) ? 16 : 24); /* * search the text until finding the non-store instruction or "s{d,w} @@ -394,7 +380,7 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra, * entries configured through the tracing/set_graph_function interface. */ - insns = in_kernel_space(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1; + insns = core_kernel_text(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1; trace.func = self_ra - (MCOUNT_INSN_SIZE * insns); /* Only trace if the calling function expects to */ From a3641631d14571242eec0d30c9faa786cbf52d44 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Thu, 8 Jun 2017 01:22:07 -0700 Subject: [PATCH 0592/1065] KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If "i" is the last element in the vcpu->arch.cpuid_entries[] array, it potentially can be exploited the vulnerability. this will out-of-bounds read and write. Luckily, the effect is small: /* when no next entry is found, the current entry[i] is reselected */ for (j = i + 1; ; j = (j + 1) % nent) { struct kvm_cpuid_entry2 *ej = &vcpu->arch.cpuid_entries[j]; if (ej->function == e->function) { It reads ej->maxphyaddr, which is user controlled. However... ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; After cpuid_entries there is int maxphyaddr; struct x86_emulate_ctxt emulate_ctxt; /* 16-byte aligned */ So we have: - cpuid_entries at offset 1B50 (6992) - maxphyaddr at offset 27D0 (6992 + 3200 = 10192) - padding at 27D4...27DF - emulate_ctxt at 27E0 And it writes in the padding. Pfew, writing the ops field of emulate_ctxt would have been much worse. This patch fixes it by modding the index to avoid the out-of-bounds access. Worst case, i == j and ej->function == e->function, the loop can bail out. Reported-by: Moguofang Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Guofang Mo Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- arch/x86/kvm/cpuid.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index a181ae76c71c..59ca2eea522c 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -780,18 +780,20 @@ out: static int move_to_next_stateful_cpuid_entry(struct kvm_vcpu *vcpu, int i) { struct kvm_cpuid_entry2 *e = &vcpu->arch.cpuid_entries[i]; - int j, nent = vcpu->arch.cpuid_nent; + struct kvm_cpuid_entry2 *ej; + int j = i; + int nent = vcpu->arch.cpuid_nent; e->flags &= ~KVM_CPUID_FLAG_STATE_READ_NEXT; /* when no next entry is found, the current entry[i] is reselected */ - for (j = i + 1; ; j = (j + 1) % nent) { - struct kvm_cpuid_entry2 *ej = &vcpu->arch.cpuid_entries[j]; - if (ej->function == e->function) { - ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; - return j; - } - } - return 0; /* silence gcc, even though control never reaches here */ + do { + j = (j + 1) % nent; + ej = &vcpu->arch.cpuid_entries[j]; + } while (ej->function != e->function); + + ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; + + return j; } /* find an entry with matching function, matching index (if needed), and that From 698b851073ddf5a894910d63ca04605e0473414e Mon Sep 17 00:00:00 2001 From: Marcin Nowakowski Date: Thu, 8 Jun 2017 15:20:32 +0200 Subject: [PATCH 0593/1065] MIPS: kprobes: flush_insn_slot should flush only if probe initialised When ftrace is used with kprobes, it is possible for a kprobe to contain an invalid location (ie. only initialised to 0 and not to a specific location in the code). Trying to perform a cache flush on such location leads to a crash r4k_flush_icache_range(). Fixes: c1bf207d6ee1 ("MIPS: kprobe: Add support.") Signed-off-by: Marcin Nowakowski Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16296/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/kprobes.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/kprobes.h b/arch/mips/include/asm/kprobes.h index 291846d9ba83..ad1a99948f27 100644 --- a/arch/mips/include/asm/kprobes.h +++ b/arch/mips/include/asm/kprobes.h @@ -43,7 +43,8 @@ typedef union mips_instruction kprobe_opcode_t; #define flush_insn_slot(p) \ do { \ - flush_icache_range((unsigned long)p->addr, \ + if (p->addr) \ + flush_icache_range((unsigned long)p->addr, \ (unsigned long)p->addr + \ (MAX_INSN_SIZE * sizeof(kprobe_opcode_t))); \ } while (0) From 16ddcc34b8bde5d9257114a16565fac73237bef9 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 17 Jan 2017 12:32:15 +0100 Subject: [PATCH 0594/1065] s390: update defconfig Signed-off-by: Martin Schwidefsky --- arch/s390/configs/default_defconfig | 39 +++++++++++++++++++++---- arch/s390/configs/gcov_defconfig | 28 +++++++++++++++--- arch/s390/configs/performance_defconfig | 27 ++++++++++++++--- arch/s390/configs/zfcpdump_defconfig | 6 ++-- arch/s390/defconfig | 8 ++--- 5 files changed, 87 insertions(+), 21 deletions(-) diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig index a5039fa89314..282072206df7 100644 --- a/arch/s390/configs/default_defconfig +++ b/arch/s390/configs/default_defconfig @@ -30,6 +30,7 @@ CONFIG_USER_NS=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y +# CONFIG_SYSFS_SYSCALL is not set CONFIG_BPF_SYSCALL=y CONFIG_USERFAULTFD=y # CONFIG_COMPAT_BRK is not set @@ -44,7 +45,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y +CONFIG_BLK_WBT=y +CONFIG_BLK_WBT_SQ=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_BSD_DISKLABEL=y @@ -90,6 +94,8 @@ CONFIG_UNIX=y CONFIG_UNIX_DIAG=m CONFIG_XFRM_USER=m CONFIG_NET_KEY=m +CONFIG_SMC=m +CONFIG_SMC_DIAG=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -359,6 +365,7 @@ CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m CONFIG_DNS_RESOLVER=y +CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y CONFIG_NET_PKTGEN=m @@ -367,16 +374,19 @@ CONFIG_DEVTMPFS=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=0 CONFIG_CONNECTOR=y +CONFIG_ZRAM=m CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_CDROM_PKTCDVD=m -CONFIG_ATA_OVER_ETH=m +CONFIG_BLK_DEV_RAM_DAX=y CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_RBD=m CONFIG_ENCLOSURE_SERVICES=m +CONFIG_GENWQE=m CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -442,6 +452,8 @@ CONFIG_NLMON=m # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_MLX4_EN=m +CONFIG_MLX5_CORE=m +CONFIG_MLX5_CORE_EN=y # CONFIG_NET_VENDOR_NATSEMI is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m @@ -452,7 +464,6 @@ CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set @@ -471,6 +482,7 @@ CONFIG_DIAG288_WATCHDOG=m CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_MLX4_INFINIBAND=m +CONFIG_MLX5_INFINIBAND=m CONFIG_VIRTIO_BALLOON=m CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y @@ -487,12 +499,18 @@ CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y CONFIG_XFS_DEBUG=y CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=m CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_BTRFS_DEBUG=y CONFIG_NILFS2_FS=m +CONFIG_FS_DAX=y +CONFIG_EXPORTFS_BLOCK_OPS=y CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_QUOTA_DEBUG=y CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m CONFIG_AUTOFS4_FS=m @@ -558,6 +576,7 @@ CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_PAGEALLOC=y +CONFIG_DEBUG_RODATA_TEST=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_SELFTEST=y CONFIG_DEBUG_OBJECTS_FREE=y @@ -580,7 +599,6 @@ CONFIG_DETECT_HUNG_TASK=y CONFIG_WQ_WATCHDOG=y CONFIG_PANIC_ON_OOPS=y CONFIG_DEBUG_TIMEKEEPING=y -CONFIG_TIMER_STATS=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y CONFIG_PROVE_LOCKING=y @@ -595,6 +613,7 @@ CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=300 CONFIG_NOTIFIER_ERROR_INJECTION=m CONFIG_PM_NOTIFIER_ERROR_INJECT=m +CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m CONFIG_FAULT_INJECTION=y CONFIG_FAILSLAB=y CONFIG_FAIL_PAGE_ALLOC=y @@ -616,13 +635,12 @@ CONFIG_HIST_TRIGGERS=y CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m CONFIG_TEST_LIST_SORT=y +CONFIG_TEST_SORT=y CONFIG_KPROBES_SANITY_TEST=y CONFIG_RBTREE_TEST=y CONFIG_INTERVAL_TREE_TEST=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y -CONFIG_TEST_STRING_HELPERS=y -CONFIG_TEST_KSTRTOX=y CONFIG_DMA_API_DEBUG=y CONFIG_TEST_BPF=m CONFIG_BUG_ON_DATA_CORRUPTION=y @@ -630,6 +648,7 @@ CONFIG_S390_PTDUMP=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y +CONFIG_HARDENED_USERCOPY=y CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 @@ -640,7 +659,9 @@ CONFIG_CRYPTO_RSA=m CONFIG_CRYPTO_DH=m CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_USER=m +CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m @@ -648,6 +669,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_KEYWRAP=m +CONFIG_CRYPTO_CMAC=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m @@ -657,8 +679,10 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_AES_TI=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -674,6 +698,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m @@ -685,6 +710,7 @@ CONFIG_CRYPTO_SHA256_S390=m CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m +CONFIG_CRYPTO_PAES_S390=m CONFIG_CRYPTO_GHASH_S390=m CONFIG_CRYPTO_CRC32_S390=y CONFIG_ASYMMETRIC_KEY_TYPE=y @@ -692,6 +718,7 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m CONFIG_CRC8=m +CONFIG_RANDOM32_SELFTEST=y CONFIG_CORDIC=m CONFIG_CMM=m CONFIG_APPLDATA_BASE=y diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig index 83970b5afb2b..3c6b78189fbc 100644 --- a/arch/s390/configs/gcov_defconfig +++ b/arch/s390/configs/gcov_defconfig @@ -31,6 +31,7 @@ CONFIG_USER_NS=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y +# CONFIG_SYSFS_SYSCALL is not set CONFIG_BPF_SYSCALL=y CONFIG_USERFAULTFD=y # CONFIG_COMPAT_BRK is not set @@ -46,7 +47,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y +CONFIG_BLK_WBT=y +CONFIG_BLK_WBT_SQ=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_BSD_DISKLABEL=y @@ -88,6 +92,8 @@ CONFIG_UNIX=y CONFIG_UNIX_DIAG=m CONFIG_XFRM_USER=m CONFIG_NET_KEY=m +CONFIG_SMC=m +CONFIG_SMC_DIAG=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -356,6 +362,7 @@ CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m CONFIG_DNS_RESOLVER=y +CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y CONFIG_NET_PKTGEN=m @@ -364,16 +371,18 @@ CONFIG_DEVTMPFS=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=0 CONFIG_CONNECTOR=y +CONFIG_ZRAM=m CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_CDROM_PKTCDVD=m -CONFIG_ATA_OVER_ETH=m +CONFIG_BLK_DEV_RAM_DAX=y CONFIG_VIRTIO_BLK=y CONFIG_ENCLOSURE_SERVICES=m +CONFIG_GENWQE=m CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -439,6 +448,8 @@ CONFIG_NLMON=m # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_MLX4_EN=m +CONFIG_MLX5_CORE=m +CONFIG_MLX5_CORE_EN=y # CONFIG_NET_VENDOR_NATSEMI is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m @@ -449,7 +460,6 @@ CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set @@ -468,6 +478,7 @@ CONFIG_DIAG288_WATCHDOG=m CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_MLX4_INFINIBAND=m +CONFIG_MLX5_INFINIBAND=m CONFIG_VIRTIO_BALLOON=m CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y @@ -483,11 +494,15 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=m CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_NILFS2_FS=m +CONFIG_FS_DAX=y +CONFIG_EXPORTFS_BLOCK_OPS=y CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA_NETLINK_INTERFACE=y CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m @@ -553,7 +568,6 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_PANIC_ON_OOPS=y -CONFIG_TIMER_STATS=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=60 CONFIG_LATENCYTOP=y @@ -576,6 +590,7 @@ CONFIG_BIG_KEYS=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y +CONFIG_HARDENED_USERCOPY=y CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 @@ -599,6 +614,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_KEYWRAP=m +CONFIG_CRYPTO_CMAC=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m @@ -611,6 +627,7 @@ CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_SHA3=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_AES_TI=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -626,16 +643,19 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_ZCRYPT=m +CONFIG_PKEY=m CONFIG_CRYPTO_SHA1_S390=m CONFIG_CRYPTO_SHA256_S390=m CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m +CONFIG_CRYPTO_PAES_S390=m CONFIG_CRYPTO_GHASH_S390=m CONFIG_CRYPTO_CRC32_S390=y CONFIG_CRC7=m diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index fbc6542aaf59..653d72bcc007 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -31,6 +31,7 @@ CONFIG_USER_NS=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y +# CONFIG_SYSFS_SYSCALL is not set CONFIG_BPF_SYSCALL=y CONFIG_USERFAULTFD=y # CONFIG_COMPAT_BRK is not set @@ -44,7 +45,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y +CONFIG_BLK_WBT=y +CONFIG_BLK_WBT_SQ=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_BSD_DISKLABEL=y @@ -86,6 +90,8 @@ CONFIG_UNIX=y CONFIG_UNIX_DIAG=m CONFIG_XFRM_USER=m CONFIG_NET_KEY=m +CONFIG_SMC=m +CONFIG_SMC_DIAG=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -354,6 +360,7 @@ CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m CONFIG_DNS_RESOLVER=y +CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y CONFIG_NET_PKTGEN=m @@ -362,16 +369,18 @@ CONFIG_DEVTMPFS=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=0 CONFIG_CONNECTOR=y +CONFIG_ZRAM=m CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_CDROM_PKTCDVD=m -CONFIG_ATA_OVER_ETH=m +CONFIG_BLK_DEV_RAM_DAX=y CONFIG_VIRTIO_BLK=y CONFIG_ENCLOSURE_SERVICES=m +CONFIG_GENWQE=m CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -437,6 +446,8 @@ CONFIG_NLMON=m # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_MLX4_EN=m +CONFIG_MLX5_CORE=m +CONFIG_MLX5_CORE_EN=y # CONFIG_NET_VENDOR_NATSEMI is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m @@ -447,7 +458,6 @@ CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set @@ -466,6 +476,7 @@ CONFIG_DIAG288_WATCHDOG=m CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_MLX4_INFINIBAND=m +CONFIG_MLX5_INFINIBAND=m CONFIG_VIRTIO_BALLOON=m CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y @@ -481,11 +492,15 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=m CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_NILFS2_FS=m +CONFIG_FS_DAX=y +CONFIG_EXPORTFS_BLOCK_OPS=y CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA_NETLINK_INTERFACE=y CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m @@ -551,7 +566,6 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_PANIC_ON_OOPS=y -CONFIG_TIMER_STATS=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=60 CONFIG_LATENCYTOP=y @@ -574,6 +588,7 @@ CONFIG_BIG_KEYS=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y +CONFIG_HARDENED_USERCOPY=y CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 @@ -597,6 +612,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_KEYWRAP=m +CONFIG_CRYPTO_CMAC=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m @@ -609,6 +625,7 @@ CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_SHA3=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_AES_TI=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -624,6 +641,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m @@ -635,6 +653,7 @@ CONFIG_CRYPTO_SHA256_S390=m CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m +CONFIG_CRYPTO_PAES_S390=m CONFIG_CRYPTO_GHASH_S390=m CONFIG_CRYPTO_CRC32_S390=y CONFIG_CRC7=m diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index e23d97c13735..afa46a7406ea 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -12,8 +12,10 @@ CONFIG_TUNE_ZEC12=y CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set CONFIG_HZ_100=y +# CONFIG_ARCH_RANDOM is not set # CONFIG_COMPACTION is not set # CONFIG_MIGRATION is not set +# CONFIG_BOUNCE is not set # CONFIG_CHECK_STACK is not set # CONFIG_CHSC_SCH is not set # CONFIG_SCM_BUS is not set @@ -36,11 +38,11 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_FC_ATTRS=y CONFIG_ZFCP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_HVC_IUCV is not set +# CONFIG_HW_RANDOM_S390 is not set CONFIG_RAW_DRIVER=y # CONFIG_SCLP_ASYNC is not set # CONFIG_HMC_DRV is not set @@ -54,9 +56,9 @@ CONFIG_RAW_DRIVER=y # CONFIG_INOTIFY_USER is not set CONFIG_CONFIGFS_FS=y # CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_PANIC_ON_OOPS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 97189dbaf34b..20244a38c886 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -28,6 +28,7 @@ CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y +# CONFIG_SYSFS_SYSCALL is not set CONFIG_BPF_SYSCALL=y CONFIG_USERFAULTFD=y # CONFIG_COMPAT_BRK is not set @@ -108,7 +109,6 @@ CONFIG_ZFCP=y CONFIG_SCSI_VIRTIO=y CONFIG_MD=y CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m CONFIG_MD_MULTIPATH=m CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=m @@ -131,6 +131,7 @@ CONFIG_TUN=m CONFIG_VIRTIO_NET=y # CONFIG_NET_VENDOR_ALACRITECH is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set # CONFIG_INPUT is not set # CONFIG_SERIO is not set CONFIG_DEVKMEM=y @@ -162,7 +163,6 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_PAGEALLOC=y CONFIG_DETECT_HUNG_TASK=y CONFIG_PANIC_ON_OOPS=y -CONFIG_TIMER_STATS=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_PROVE_LOCKING=y CONFIG_LOCK_STAT=y @@ -172,14 +172,12 @@ CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y CONFIG_RCU_CPU_STALL_TIMEOUT=60 -CONFIG_RCU_TRACE=y CONFIG_LATENCYTOP=y CONFIG_SCHED_TRACER=y CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_UPROBE_EVENTS=y CONFIG_FUNCTION_PROFILER=y CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_KPROBES_SANITY_TEST=y @@ -190,7 +188,6 @@ CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m @@ -230,6 +227,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m CONFIG_ZCRYPT=m CONFIG_PKEY=m +CONFIG_CRYPTO_PAES_S390=m CONFIG_CRYPTO_SHA1_S390=m CONFIG_CRYPTO_SHA256_S390=m CONFIG_CRYPTO_SHA512_S390=m From 6460495709aeb651896bc8e5c134b2e4ca7d34a8 Mon Sep 17 00:00:00 2001 From: James Wang Date: Thu, 8 Jun 2017 14:52:51 +0800 Subject: [PATCH 0595/1065] Fix loop device flush before configure v3 While installing SLES-12 (based on v4.4), I found that the installer will stall for 60+ seconds during LVM disk scan. The root cause was determined to be the removal of a bound device check in loop_flush() by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq"). Restoring this check, examining ->lo_state as set by loop_set_fd() eliminates the bad behavior. Test method: modprobe loop max_loop=64 dd if=/dev/zero of=disk bs=512 count=200K for((i=0;i<4;i++))do losetup -f disk; done mkfs.ext4 -F /dev/loop0 for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done for f in `ls /dev/loop[0-9]*|sort`; do \ echo $f; dd if=$f of=/dev/null bs=512 count=1; \ done Test output: stock patched /dev/loop0 18.1217e-05 8.3842e-05 /dev/loop1 6.1114e-05 0.000147979 /dev/loop10 0.414701 0.000116564 /dev/loop11 0.7474 6.7942e-05 /dev/loop12 0.747986 8.9082e-05 /dev/loop13 0.746532 7.4799e-05 /dev/loop14 0.480041 9.3926e-05 /dev/loop15 1.26453 7.2522e-05 Note that from loop10 onward, the device is not mounted, yet the stock kernel consumes several orders of magnitude more wall time than it does for a mounted device. (Thanks for Mike Galbraith , give a changelog review.) Reviewed-by: Hannes Reinecke Reviewed-by: Ming Lei Signed-off-by: James Wang Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq") Signed-off-by: Jens Axboe --- drivers/block/loop.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 28d932906f24..ebbd0c3fe0ed 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -608,6 +608,9 @@ static int loop_switch(struct loop_device *lo, struct file *file) */ static int loop_flush(struct loop_device *lo) { + /* loop not yet configured, no running thread, nothing to flush */ + if (lo->lo_state != Lo_bound) + return 0; return loop_switch(lo, NULL); } From ef6c4d75e35345f8f362d6754bcd9a28292a897c Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 8 Jun 2017 16:58:23 +0300 Subject: [PATCH 0596/1065] drm/i915: fix warning for unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/gpu/drm/i915/intel_engine_cs.c: In function ‘intel_engine_is_idle’: drivers/gpu/drm/i915/intel_engine_cs.c:1103:27: error: unused variable ‘dev_priv’ [-Werror=unused-variable] struct drm_i915_private *dev_priv = engine->i915; ^~~~~~~~ Reviewed-by: Chris Wilson Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_engine_cs.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c index 9a0fb3cdd4e0..f94eacff196c 100644 --- a/drivers/gpu/drm/i915/intel_engine_cs.c +++ b/drivers/gpu/drm/i915/intel_engine_cs.c @@ -1100,8 +1100,6 @@ static bool ring_is_idle(struct intel_engine_cs *engine) */ bool intel_engine_is_idle(struct intel_engine_cs *engine) { - struct drm_i915_private *dev_priv = engine->i915; - /* Any inflight/incomplete requests? */ if (!i915_seqno_passed(intel_engine_get_seqno(engine), intel_engine_last_submit(engine))) From cd1997f6c11483da819a7719aa013093b8003743 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 8 Jun 2017 19:06:29 +1000 Subject: [PATCH 0597/1065] net: s390: fix up for "Fix inconsistent teardown and release of private netdev state" Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller --- drivers/s390/net/netiucv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index dba94b486f05..fa732bd86729 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -1954,7 +1954,6 @@ static void netiucv_free_netdevice(struct net_device *dev) privptr->conn = NULL; privptr->fsm = NULL; /* privptr gets freed by free_netdev() */ } - free_netdev(dev); } /** @@ -1972,7 +1971,8 @@ static void netiucv_setup_netdevice(struct net_device *dev) dev->mtu = NETIUCV_MTU_DEFAULT; dev->min_mtu = 576; dev->max_mtu = NETIUCV_MTU_MAX; - dev->destructor = netiucv_free_netdevice; + dev->needs_free_netdev = true; + dev->priv_destructor = netiucv_free_netdevice; dev->hard_header_len = NETIUCV_HDRLEN; dev->addr_len = 0; dev->type = ARPHRD_SLIP; From ed66e50d9587fc0bb032e276a2563c0068a5b63a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 8 Jun 2017 10:16:05 -0400 Subject: [PATCH 0598/1065] hsi: Fix build regression due to netdev destructor fix. > ../drivers/hsi/clients/ssi_protocol.c:1069:5: error: 'struct net_device' has no member named 'destructor' Reported-by: Mark Brown Reported-by: Stephen Rothwell Signed-off-by: David S. Miller --- drivers/hsi/clients/ssi_protocol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hsi/clients/ssi_protocol.c b/drivers/hsi/clients/ssi_protocol.c index 26b05106f0d3..93d28c0ec8bf 100644 --- a/drivers/hsi/clients/ssi_protocol.c +++ b/drivers/hsi/clients/ssi_protocol.c @@ -1066,7 +1066,7 @@ static void ssip_pn_setup(struct net_device *dev) dev->addr_len = 1; dev->tx_queue_len = SSIP_TXQUEUE_LEN; - dev->destructor = free_netdev; + dev->needs_free_netdev = true; dev->header_ops = &phonet_header_ops; } From 85eac2ba35a2dbfbdd5767c7447a4af07444a5b4 Mon Sep 17 00:00:00 2001 From: Mateusz Jurczyk Date: Wed, 7 Jun 2017 15:14:29 +0200 Subject: [PATCH 0599/1065] decnet: dn_rtmsg: Improve input length sanitization in dnrmg_receive_user_skb Verify that the length of the socket buffer is sufficient to cover the entire nlh->nlmsg_len field before accessing that field for further input sanitization. If the client only supplies 1-3 bytes of data in sk_buff, then nlh->nlmsg_len remains partially uninitialized and contains leftover memory from the corresponding kernel allocation. Operating on such data may result in indeterminate evaluation of the nlmsg_len < sizeof(*nlh) expression. The bug was discovered by a runtime instrumentation designed to detect use of uninitialized memory in the kernel. The patch prevents this and other similar tools (e.g. KMSAN) from flagging this behavior in the future. Signed-off-by: Mateusz Jurczyk Signed-off-by: David S. Miller --- net/decnet/netfilter/dn_rtmsg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/decnet/netfilter/dn_rtmsg.c b/net/decnet/netfilter/dn_rtmsg.c index 1ed81ac6dd1a..26e020e9d415 100644 --- a/net/decnet/netfilter/dn_rtmsg.c +++ b/net/decnet/netfilter/dn_rtmsg.c @@ -102,7 +102,9 @@ static inline void dnrmg_receive_user_skb(struct sk_buff *skb) { struct nlmsghdr *nlh = nlmsg_hdr(skb); - if (nlh->nlmsg_len < sizeof(*nlh) || skb->len < nlh->nlmsg_len) + if (skb->len < sizeof(nlh->nlmsg_len) || + nlh->nlmsg_len < sizeof(*nlh) || + skb->len < nlh->nlmsg_len) return; if (!netlink_capable(skb, CAP_NET_ADMIN)) From 19d90ece81da802207a9b91ce95a29fbdc40626e Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Wed, 7 Jun 2017 15:51:15 +0200 Subject: [PATCH 0600/1065] net: emac: fix reset timeout with AR8035 phy This patch fixes a problem where the AR8035 PHY can't be detected on an Cisco Meraki MR24, if the ethernet cable is not connected on boot. Russell Senior provided steps to reproduce the issue: |Disconnect ethernet cable, apply power, wait until device has booted, |plug in ethernet, check for interfaces, no eth0 is listed. | |This appears to be a problem during probing of the AR8035 Phy chip. |When ethernet has no link, the phy detection fails, and eth0 is not |created. Plugging ethernet later has no effect, because there is no |interface as far as the kernel is concerned. The relevant part of |the boot log looks like this: |this is the failing case: | |[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout |[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY! |and the succeeding case: | |[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:.. |[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01) Based on the comment and the commit message of commit 23fbb5a87c56 ("emac: Fix EMAC soft reset on 460EX/GT"). This is because the AR8035 PHY doesn't provide the TX Clock, if the ethernet cable is not attached. This causes the reset to timeout and the PHY detection code in emac_init_phy() is unable to detect the AR8035 PHY. As a result, the emac driver bails out early and the user left with no ethernet. In order to stay compatible with existing configurations, the driver tries the current reset approach at first. Only if the first attempt timed out, it does perform one more retry with the clock temporarily switched to the internal source for just the duration of the reset. LEDE-Bug: #687 Cc: Chris Blake Reported-by: Russell Senior Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT") Signed-off-by: Christian Lamparter Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 508923f39ccf..b6e871bfb659 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -343,6 +343,7 @@ static int emac_reset(struct emac_instance *dev) { struct emac_regs __iomem *p = dev->emacp; int n = 20; + bool __maybe_unused try_internal_clock = false; DBG(dev, "reset" NL); @@ -355,6 +356,7 @@ static int emac_reset(struct emac_instance *dev) } #ifdef CONFIG_PPC_DCR_NATIVE +do_retry: /* * PPC460EX/GT Embedded Processor Advanced User's Manual * section 28.10.1 Mode Register 0 (EMACx_MR0) states: @@ -362,10 +364,19 @@ static int emac_reset(struct emac_instance *dev) * of the EMAC. If none is present, select the internal clock * (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1). * After a soft reset, select the external clock. + * + * The AR8035-A PHY Meraki MR24 does not provide a TX Clk if the + * ethernet cable is not attached. This causes the reset to timeout + * and the PHY detection code in emac_init_phy() is unable to + * communicate and detect the AR8035-A PHY. As a result, the emac + * driver bails out early and the user has no ethernet. + * In order to stay compatible with existing configurations, the + * driver will temporarily switch to the internal clock, after + * the first reset fails. */ if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { - if (dev->phy_address == 0xffffffff && - dev->phy_map == 0xffffffff) { + if (try_internal_clock || (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff)) { /* No PHY: select internal loop clock before reset */ dcri_clrset(SDR0, SDR0_ETH_CFG, 0, SDR0_ETH_CFG_ECS << dev->cell_index); @@ -383,8 +394,15 @@ static int emac_reset(struct emac_instance *dev) #ifdef CONFIG_PPC_DCR_NATIVE if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { - if (dev->phy_address == 0xffffffff && - dev->phy_map == 0xffffffff) { + if (!n && !try_internal_clock) { + /* first attempt has timed out. */ + n = 20; + try_internal_clock = true; + goto do_retry; + } + + if (try_internal_clock || (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff)) { /* No PHY: restore external clock source after reset */ dcri_clrset(SDR0, SDR0_ETH_CFG, SDR0_ETH_CFG_ECS << dev->cell_index, 0); From 9065bc386fcf52dee8f697450ddeb788e1bd514c Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Wed, 7 Jun 2017 15:51:16 +0200 Subject: [PATCH 0601/1065] net: emac: fix and unify emac_mdio functions emac_mdio_read_link() was not copying the requested phy settings back into the emac driver's own phy api. This has caused a link speed mismatch issue for the AR8035 as the emac driver kept trying to connect with 10/100MBps on a 1GBit/s link. This patch also unifies shared code between emac_setup_aneg() and emac_mdio_setup_forced(). And furthermore it removes a chunk of emac_mdio_init_phy(), that was copying the same data into itself. Signed-off-by: Christian Lamparter Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 41 ++++++++++++---------------- 1 file changed, 18 insertions(+), 23 deletions(-) diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index b6e871bfb659..259e69a52ec5 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -2478,20 +2478,24 @@ static int emac_mii_bus_reset(struct mii_bus *bus) return emac_reset(dev); } +static int emac_mdio_phy_start_aneg(struct mii_phy *phy, + struct phy_device *phy_dev) +{ + phy_dev->autoneg = phy->autoneg; + phy_dev->speed = phy->speed; + phy_dev->duplex = phy->duplex; + phy_dev->advertising = phy->advertising; + return phy_start_aneg(phy_dev); +} + static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise) { struct net_device *ndev = phy->dev; struct emac_instance *dev = netdev_priv(ndev); - dev->phy.autoneg = AUTONEG_ENABLE; - dev->phy.speed = SPEED_1000; - dev->phy.duplex = DUPLEX_FULL; - dev->phy.advertising = advertise; phy->autoneg = AUTONEG_ENABLE; - phy->speed = dev->phy.speed; - phy->duplex = dev->phy.duplex; phy->advertising = advertise; - return phy_start_aneg(dev->phy_dev); + return emac_mdio_phy_start_aneg(phy, dev->phy_dev); } static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd) @@ -2499,13 +2503,10 @@ static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd) struct net_device *ndev = phy->dev; struct emac_instance *dev = netdev_priv(ndev); - dev->phy.autoneg = AUTONEG_DISABLE; - dev->phy.speed = speed; - dev->phy.duplex = fd; phy->autoneg = AUTONEG_DISABLE; phy->speed = speed; phy->duplex = fd; - return phy_start_aneg(dev->phy_dev); + return emac_mdio_phy_start_aneg(phy, dev->phy_dev); } static int emac_mdio_poll_link(struct mii_phy *phy) @@ -2527,16 +2528,17 @@ static int emac_mdio_read_link(struct mii_phy *phy) { struct net_device *ndev = phy->dev; struct emac_instance *dev = netdev_priv(ndev); + struct phy_device *phy_dev = dev->phy_dev; int res; - res = phy_read_status(dev->phy_dev); + res = phy_read_status(phy_dev); if (res) return res; - dev->phy.speed = phy->speed; - dev->phy.duplex = phy->duplex; - dev->phy.pause = phy->pause; - dev->phy.asym_pause = phy->asym_pause; + phy->speed = phy_dev->speed; + phy->duplex = phy_dev->duplex; + phy->pause = phy_dev->pause; + phy->asym_pause = phy_dev->asym_pause; return 0; } @@ -2546,13 +2548,6 @@ static int emac_mdio_init_phy(struct mii_phy *phy) struct emac_instance *dev = netdev_priv(ndev); phy_start(dev->phy_dev); - dev->phy.autoneg = phy->autoneg; - dev->phy.speed = phy->speed; - dev->phy.duplex = phy->duplex; - dev->phy.advertising = phy->advertising; - dev->phy.pause = phy->pause; - dev->phy.asym_pause = phy->asym_pause; - return phy_init_hw(dev->phy_dev); } From c164772dd32343ee19e276ce0137830557517834 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 8 Jun 2017 10:50:18 -0400 Subject: [PATCH 0602/1065] Revert "decnet: dn_rtmsg: Improve input length sanitization in dnrmg_receive_user_skb" This reverts commit 85eac2ba35a2dbfbdd5767c7447a4af07444a5b4. There is an updated version of this fix which we should use instead. Signed-off-by: David S. Miller --- net/decnet/netfilter/dn_rtmsg.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/decnet/netfilter/dn_rtmsg.c b/net/decnet/netfilter/dn_rtmsg.c index 26e020e9d415..1ed81ac6dd1a 100644 --- a/net/decnet/netfilter/dn_rtmsg.c +++ b/net/decnet/netfilter/dn_rtmsg.c @@ -102,9 +102,7 @@ static inline void dnrmg_receive_user_skb(struct sk_buff *skb) { struct nlmsghdr *nlh = nlmsg_hdr(skb); - if (skb->len < sizeof(nlh->nlmsg_len) || - nlh->nlmsg_len < sizeof(*nlh) || - skb->len < nlh->nlmsg_len) + if (nlh->nlmsg_len < sizeof(*nlh) || skb->len < nlh->nlmsg_len) return; if (!netlink_capable(skb, CAP_NET_ADMIN)) From dd0da17b209ed91f39872766634ca967c170ada1 Mon Sep 17 00:00:00 2001 From: Mateusz Jurczyk Date: Wed, 7 Jun 2017 16:14:29 +0200 Subject: [PATCH 0603/1065] decnet: dn_rtmsg: Improve input length sanitization in dnrmg_receive_user_skb Verify that the length of the socket buffer is sufficient to cover the nlmsghdr structure before accessing the nlh->nlmsg_len field for further input sanitization. If the client only supplies 1-3 bytes of data in sk_buff, then nlh->nlmsg_len remains partially uninitialized and contains leftover memory from the corresponding kernel allocation. Operating on such data may result in indeterminate evaluation of the nlmsg_len < sizeof(*nlh) expression. The bug was discovered by a runtime instrumentation designed to detect use of uninitialized memory in the kernel. The patch prevents this and other similar tools (e.g. KMSAN) from flagging this behavior in the future. Signed-off-by: Mateusz Jurczyk Signed-off-by: David S. Miller --- net/decnet/netfilter/dn_rtmsg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/decnet/netfilter/dn_rtmsg.c b/net/decnet/netfilter/dn_rtmsg.c index 1ed81ac6dd1a..aa8ffecc46a4 100644 --- a/net/decnet/netfilter/dn_rtmsg.c +++ b/net/decnet/netfilter/dn_rtmsg.c @@ -102,7 +102,9 @@ static inline void dnrmg_receive_user_skb(struct sk_buff *skb) { struct nlmsghdr *nlh = nlmsg_hdr(skb); - if (nlh->nlmsg_len < sizeof(*nlh) || skb->len < nlh->nlmsg_len) + if (skb->len < sizeof(*nlh) || + nlh->nlmsg_len < sizeof(*nlh) || + skb->len < nlh->nlmsg_len) return; if (!netlink_capable(skb, CAP_NET_ADMIN)) From 0eed9cf58446b28b233388b7f224cbca268b6986 Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Wed, 7 Jun 2017 21:00:33 +0300 Subject: [PATCH 0604/1065] net: Zero ifla_vf_info in rtnl_fill_vfinfo() Some of the structure's fields are not initialized by the rtnetlink. If driver doesn't set those in ndo_get_vf_config(), they'd leak memory to user. Signed-off-by: Yuval Mintz CC: Michal Schmidt Reviewed-by: Greg Rose Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 9e2c0a7cb325..5e61456f6bc7 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1124,6 +1124,8 @@ static noinline_for_stack int rtnl_fill_vfinfo(struct sk_buff *skb, struct ifla_vf_mac vf_mac; struct ifla_vf_info ivi; + memset(&ivi, 0, sizeof(ivi)); + /* Not all SR-IOV capable drivers support the * spoofcheck and "RSS query enable" query. Preset to * -1 so the user space tool can detect that the driver @@ -1132,7 +1134,6 @@ static noinline_for_stack int rtnl_fill_vfinfo(struct sk_buff *skb, ivi.spoofchk = -1; ivi.rss_query_en = -1; ivi.trusted = -1; - memset(ivi.mac, 0, sizeof(ivi.mac)); /* The default value for VF link state is "auto" * IFLA_VF_LINK_STATE_AUTO which equals zero */ From 8397ed36b7c585f8d3e06c431f4137309124f78f Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 7 Jun 2017 12:26:23 -0600 Subject: [PATCH 0605/1065] net: ipv6: Release route when device is unregistering Roopa reported attempts to delete a bond device that is referenced in a multipath route is hanging: $ ifdown bond2 # ifupdown2 command that deletes virtual devices unregister_netdevice: waiting for bond2 to become free. Usage count = 2 Steps to reproduce: echo 1 > /proc/sys/net/ipv6/conf/all/ignore_routes_with_linkdown ip link add dev bond12 type bond ip link add dev bond13 type bond ip addr add 2001:db8:2::0/64 dev bond12 ip addr add 2001:db8:3::0/64 dev bond13 ip route add 2001:db8:33::0/64 nexthop via 2001:db8:2::2 nexthop via 2001:db8:3::2 ip link del dev bond12 ip link del dev bond13 The root cause is the recent change to keep routes on a linkdown. Update the check to detect when the device is unregistering and release the route for that case. Fixes: a1a22c12060e4 ("net: ipv6: Keep nexthop of multipath route on admin down") Reported-by: Roopa Prabhu Signed-off-by: David Ahern Acked-by: Roopa Prabhu Signed-off-by: David S. Miller --- include/linux/netdevice.h | 5 +++++ net/ipv6/route.c | 1 + 2 files changed, 6 insertions(+) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ab7ca3fdc495..846193dfb0ac 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -4262,6 +4262,11 @@ static inline const char *netdev_name(const struct net_device *dev) return dev->name; } +static inline bool netdev_unregistering(const struct net_device *dev) +{ + return dev->reg_state == NETREG_UNREGISTERING; +} + static inline const char *netdev_reg_state(const struct net_device *dev) { switch (dev->reg_state) { diff --git a/net/ipv6/route.c b/net/ipv6/route.c index dc61b0b5e64e..7cebd954d5bb 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2804,6 +2804,7 @@ static int fib6_ifdown(struct rt6_info *rt, void *arg) if ((rt->dst.dev == dev || !dev) && rt != adn->net->ipv6.ip6_null_entry && (rt->rt6i_nsiblings == 0 || + (dev && netdev_unregistering(dev)) || !rt->rt6i_idev->cnf.ignore_routes_with_linkdown)) return -1; From 95989c46d2a156365867b1d795fdefce71bce378 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Thu, 8 Jun 2017 08:23:07 -0700 Subject: [PATCH 0606/1065] xfs: fix spurious spin_is_locked() assert failures on non-smp kernels The 0-day kernel test robot reports assertion failures on !CONFIG_SMP kernels due to failed spin_is_locked() checks. As it turns out, spin_is_locked() is hardcoded to return zero on !CONFIG_SMP kernels and so this function cannot be relied on to verify spinlock state in this configuration. To avoid this problem, replace the associated asserts with lockdep variants that do the right thing regardless of kernel configuration. Drop the one assert that checks for an unlocked lock as there is no suitable lockdep variant for that case. This moves the spinlock checks from XFS debug code to lockdep, but generally provides the same level of protection. Reported-by: kbuild test robot Signed-off-by: Brian Foster Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_buf.c | 2 +- fs/xfs/xfs_icache.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 07b77b73b024..16d6a578fc16 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -117,7 +117,7 @@ static inline void __xfs_buf_ioacct_dec( struct xfs_buf *bp) { - ASSERT(spin_is_locked(&bp->b_lock)); + lockdep_assert_held(&bp->b_lock); if (bp->b_state & XFS_BSTATE_IN_FLIGHT) { bp->b_state &= ~XFS_BSTATE_IN_FLIGHT; diff --git a/fs/xfs/xfs_icache.c b/fs/xfs/xfs_icache.c index f61c84f8e31a..990210fcb9c3 100644 --- a/fs/xfs/xfs_icache.c +++ b/fs/xfs/xfs_icache.c @@ -66,7 +66,6 @@ xfs_inode_alloc( XFS_STATS_INC(mp, vn_active); ASSERT(atomic_read(&ip->i_pincount) == 0); - ASSERT(!spin_is_locked(&ip->i_flags_lock)); ASSERT(!xfs_isiflocked(ip)); ASSERT(ip->i_ino == 0); @@ -190,7 +189,7 @@ xfs_perag_set_reclaim_tag( { struct xfs_mount *mp = pag->pag_mount; - ASSERT(spin_is_locked(&pag->pag_ici_lock)); + lockdep_assert_held(&pag->pag_ici_lock); if (pag->pag_ici_reclaimable++) return; @@ -212,7 +211,7 @@ xfs_perag_clear_reclaim_tag( { struct xfs_mount *mp = pag->pag_mount; - ASSERT(spin_is_locked(&pag->pag_ici_lock)); + lockdep_assert_held(&pag->pag_ici_lock); if (--pag->pag_ici_reclaimable) return; From cdf7abc4610a7f1c43d06cda246c5f748a4fd267 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 31 May 2017 14:03:10 +0200 Subject: [PATCH 0607/1065] srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting down a guest running iperf on a VFIO assigned device. This happens because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt context, while a worker thread does the same inside kvm_set_irq(). If the interrupt happens while the worker thread is executing __srcu_read_lock(), updates to the Classic SRCU ->lock_count[] field or the Tree SRCU ->srcu_lock_count[] field can be lost. The docs say you are not supposed to call srcu_read_lock() and srcu_read_unlock() from irq context, but KVM interrupt injection happens from (host) interrupt context and it would be nice if SRCU supported the use case. KVM is using SRCU here not really for the "sleepable" part, but rather due to its IPI-free fast detection of grace periods. It is therefore not desirable to switch back to RCU, which would effectively revert commit 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING", 2014-01-16). However, the docs are overly conservative. You can have an SRCU instance only has users in irq context, and you can mix process and irq context as long as process context users disable interrupts. In addition, __srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and Classic SRCU. For those two implementations, only srcu_read_lock() is unsafe. When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(), in commit 5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments. Therefore it kept __this_cpu_inc(), with preempt_disable/enable in the caller. Tree SRCU however only does one increment, so on most architectures it is more efficient for __srcu_read_lock() to use this_cpu_inc(), and any performance differences appear to be down in the noise. Unlike Classic and Tree SRCU, Tiny SRCU does increments and decrements on a single variable. Therefore, as Peter Zijlstra pointed out, Tiny SRCU's implementation already supports mixed-context use of srcu_read_lock() and srcu_read_unlock(), at least as long as uses of srcu_read_lock() and srcu_read_unlock() in each handler are nested and paired properly. In other words, it is still illegal to (say) invoke srcu_read_lock() in an interrupt handler and to invoke the matching srcu_read_unlock() in a softirq handler. Therefore, the only change required for Tiny SRCU is to its comments. Fixes: 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING") Reported-by: Linu Cherian Suggested-by: Linu Cherian Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini Cc: Linus Torvalds Signed-off-by: Paul E. McKenney Tested-by: Paolo Bonzini --- kernel/rcu/srcutiny.c | 7 ++++--- kernel/rcu/srcutree.c | 5 ++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/kernel/rcu/srcutiny.c b/kernel/rcu/srcutiny.c index 36e1f82faed1..32798eb14853 100644 --- a/kernel/rcu/srcutiny.c +++ b/kernel/rcu/srcutiny.c @@ -97,8 +97,9 @@ EXPORT_SYMBOL_GPL(cleanup_srcu_struct); /* * Counts the new reader in the appropriate per-CPU element of the - * srcu_struct. Must be called from process context. - * Returns an index that must be passed to the matching srcu_read_unlock(). + * srcu_struct. Can be invoked from irq/bh handlers, but the matching + * __srcu_read_unlock() must be in the same handler instance. Returns an + * index that must be passed to the matching srcu_read_unlock(). */ int __srcu_read_lock(struct srcu_struct *sp) { @@ -112,7 +113,7 @@ EXPORT_SYMBOL_GPL(__srcu_read_lock); /* * Removes the count for the old reader from the appropriate element of - * the srcu_struct. Must be called from process context. + * the srcu_struct. */ void __srcu_read_unlock(struct srcu_struct *sp, int idx) { diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c index 3ae8474557df..157654fa436a 100644 --- a/kernel/rcu/srcutree.c +++ b/kernel/rcu/srcutree.c @@ -357,7 +357,7 @@ EXPORT_SYMBOL_GPL(cleanup_srcu_struct); /* * Counts the new reader in the appropriate per-CPU element of the - * srcu_struct. Must be called from process context. + * srcu_struct. * Returns an index that must be passed to the matching srcu_read_unlock(). */ int __srcu_read_lock(struct srcu_struct *sp) @@ -365,7 +365,7 @@ int __srcu_read_lock(struct srcu_struct *sp) int idx; idx = READ_ONCE(sp->srcu_idx) & 0x1; - __this_cpu_inc(sp->sda->srcu_lock_count[idx]); + this_cpu_inc(sp->sda->srcu_lock_count[idx]); smp_mb(); /* B */ /* Avoid leaking the critical section. */ return idx; } @@ -375,7 +375,6 @@ EXPORT_SYMBOL_GPL(__srcu_read_lock); * Removes the count for the old reader from the appropriate per-CPU * element of the srcu_struct. Note that this may well be a different * CPU than that which was incremented by the corresponding srcu_read_lock(). - * Must be called from process context. */ void __srcu_read_unlock(struct srcu_struct *sp, int idx) { From 1123a6041654e8f889014659593bad4168e542c2 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 31 May 2017 14:03:11 +0200 Subject: [PATCH 0608/1065] srcu: Allow use of Classic SRCU from both process and interrupt context Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting down a guest running iperf on a VFIO assigned device. This happens because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt context, while a worker thread does the same inside kvm_set_irq(). If the interrupt happens while the worker thread is executing __srcu_read_lock(), updates to the Classic SRCU ->lock_count[] field or the Tree SRCU ->srcu_lock_count[] field can be lost. The docs say you are not supposed to call srcu_read_lock() and srcu_read_unlock() from irq context, but KVM interrupt injection happens from (host) interrupt context and it would be nice if SRCU supported the use case. KVM is using SRCU here not really for the "sleepable" part, but rather due to its IPI-free fast detection of grace periods. It is therefore not desirable to switch back to RCU, which would effectively revert commit 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING", 2014-01-16). However, the docs are overly conservative. You can have an SRCU instance only has users in irq context, and you can mix process and irq context as long as process context users disable interrupts. In addition, __srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and Classic SRCU. For those two implementations, only srcu_read_lock() is unsafe. When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(), in commit 5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments. Therefore it kept __this_cpu_inc(), with preempt_disable/enable in the caller. Tree SRCU however only does one increment, so on most architectures it is more efficient for __srcu_read_lock() to use this_cpu_inc(), and any performance differences appear to be down in the noise. Cc: stable@vger.kernel.org Fixes: 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING") Reported-by: Linu Cherian Suggested-by: Linu Cherian Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini Cc: Linus Torvalds Signed-off-by: Paul E. McKenney --- include/linux/srcu.h | 2 -- kernel/rcu/srcu.c | 5 ++--- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/include/linux/srcu.h b/include/linux/srcu.h index 167ad8831aaf..4c1d5f7e62c4 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -172,9 +172,7 @@ static inline int srcu_read_lock(struct srcu_struct *sp) __acquires(sp) { int retval; - preempt_disable(); retval = __srcu_read_lock(sp); - preempt_enable(); rcu_lock_acquire(&(sp)->dep_map); return retval; } diff --git a/kernel/rcu/srcu.c b/kernel/rcu/srcu.c index 584d8a983883..dea03614263f 100644 --- a/kernel/rcu/srcu.c +++ b/kernel/rcu/srcu.c @@ -263,7 +263,7 @@ EXPORT_SYMBOL_GPL(cleanup_srcu_struct); /* * Counts the new reader in the appropriate per-CPU element of the - * srcu_struct. Must be called from process context. + * srcu_struct. * Returns an index that must be passed to the matching srcu_read_unlock(). */ int __srcu_read_lock(struct srcu_struct *sp) @@ -271,7 +271,7 @@ int __srcu_read_lock(struct srcu_struct *sp) int idx; idx = READ_ONCE(sp->completed) & 0x1; - __this_cpu_inc(sp->per_cpu_ref->lock_count[idx]); + this_cpu_inc(sp->per_cpu_ref->lock_count[idx]); smp_mb(); /* B */ /* Avoid leaking the critical section. */ return idx; } @@ -281,7 +281,6 @@ EXPORT_SYMBOL_GPL(__srcu_read_lock); * Removes the count for the old reader from the appropriate per-CPU * element of the srcu_struct. Note that this may well be a different * CPU than that which was incremented by the corresponding srcu_read_lock(). - * Must be called from process context. */ void __srcu_read_unlock(struct srcu_struct *sp, int idx) { From fbd4c7e768f1719bea340e40148800279d230922 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 7 Jun 2017 15:53:47 -0700 Subject: [PATCH 0609/1065] netvsc: fix rcu dereference warning from ethtool The ethtool info command calls the netvsc get_sset_count with RTNL but not with RCU. Which causes warning: drivers/net/hyperv/netvsc_drv.c:1010 suspicious rcu_dereference_check() usage! Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 4421a6d00375..d93e4da25fd2 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -1028,7 +1028,7 @@ static const struct { static int netvsc_get_sset_count(struct net_device *dev, int string_set) { struct net_device_context *ndc = netdev_priv(dev); - struct netvsc_device *nvdev = rcu_dereference(ndc->nvdev); + struct netvsc_device *nvdev = rtnl_dereference(ndc->nvdev); if (!nvdev) return -ENODEV; From a5ecd43992a7cd9f91d5f98b0082ae44df5e543c Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 7 Jun 2017 15:53:48 -0700 Subject: [PATCH 0610/1065] netvsc: fix net poll mode The ndo_poll_controller function needs to schedule NAPI to pick up arriving packets and send completions. Otherwise no data will ever be received. For simple case of netconsole, it also will allow send completions to happen. Without this netpoll will eventually get stuck. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index d93e4da25fd2..252e5d52d17e 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -1158,11 +1158,22 @@ netvsc_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info, } #ifdef CONFIG_NET_POLL_CONTROLLER -static void netvsc_poll_controller(struct net_device *net) +static void netvsc_poll_controller(struct net_device *dev) { - /* As netvsc_start_xmit() works synchronous we don't have to - * trigger anything here. - */ + struct net_device_context *ndc = netdev_priv(dev); + struct netvsc_device *ndev; + int i; + + rcu_read_lock(); + ndev = rcu_dereference(ndc->nvdev); + if (ndev) { + for (i = 0; i < ndev->num_chn; i++) { + struct netvsc_channel *nvchan = &ndev->chan_table[i]; + + napi_schedule(&nvchan->napi); + } + } + rcu_read_unlock(); } #endif From 4f19c0d8070cd4aa8e85bbf8a19d9ef5bef77c90 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 7 Jun 2017 15:53:49 -0700 Subject: [PATCH 0611/1065] netvsc: move filter setting to rndis_device The work queue and handling of network filter parameters should be in rndis_device. This gets rid of warning from RCU checks, eliminates a race and cleans up code. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/hyperv_net.h | 5 +++-- drivers/net/hyperv/netvsc_drv.c | 33 ++----------------------------- drivers/net/hyperv/rndis_filter.c | 30 +++++++++++++++++++++++++++- 3 files changed, 34 insertions(+), 34 deletions(-) diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 262b2ea576a3..6066f1bcaf2d 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -171,6 +171,8 @@ struct rndis_device { spinlock_t request_lock; struct list_head req_list; + struct work_struct mcast_work; + u8 hw_mac_adr[ETH_ALEN]; u8 rss_key[NETVSC_HASH_KEYLEN]; u16 ind_table[ITAB_NUM]; @@ -201,6 +203,7 @@ int rndis_filter_open(struct netvsc_device *nvdev); int rndis_filter_close(struct netvsc_device *nvdev); int rndis_filter_device_add(struct hv_device *dev, struct netvsc_device_info *info); +void rndis_filter_update(struct netvsc_device *nvdev); void rndis_filter_device_remove(struct hv_device *dev, struct netvsc_device *nvdev); int rndis_filter_set_rss_param(struct rndis_device *rdev, @@ -211,7 +214,6 @@ int rndis_filter_receive(struct net_device *ndev, struct vmbus_channel *channel, void *data, u32 buflen); -int rndis_filter_set_packet_filter(struct rndis_device *dev, u32 new_filter); int rndis_filter_set_device_mac(struct net_device *ndev, char *mac); void netvsc_switch_datapath(struct net_device *nv_dev, bool vf); @@ -696,7 +698,6 @@ struct net_device_context { /* list protection */ spinlock_t lock; - struct work_struct work; u32 msg_enable; /* debug level */ u32 tx_checksum_mask; diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 252e5d52d17e..82d6c022ca85 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -56,37 +56,12 @@ static int debug = -1; module_param(debug, int, S_IRUGO); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); -static void do_set_multicast(struct work_struct *w) -{ - struct net_device_context *ndevctx = - container_of(w, struct net_device_context, work); - struct hv_device *device_obj = ndevctx->device_ctx; - struct net_device *ndev = hv_get_drvdata(device_obj); - struct netvsc_device *nvdev = rcu_dereference(ndevctx->nvdev); - struct rndis_device *rdev; - - if (!nvdev) - return; - - rdev = nvdev->extension; - if (rdev == NULL) - return; - - if (ndev->flags & IFF_PROMISC) - rndis_filter_set_packet_filter(rdev, - NDIS_PACKET_TYPE_PROMISCUOUS); - else - rndis_filter_set_packet_filter(rdev, - NDIS_PACKET_TYPE_BROADCAST | - NDIS_PACKET_TYPE_ALL_MULTICAST | - NDIS_PACKET_TYPE_DIRECTED); -} - static void netvsc_set_multicast_list(struct net_device *net) { struct net_device_context *net_device_ctx = netdev_priv(net); + struct netvsc_device *nvdev = rtnl_dereference(net_device_ctx->nvdev); - schedule_work(&net_device_ctx->work); + rndis_filter_update(nvdev); } static int netvsc_open(struct net_device *net) @@ -123,8 +98,6 @@ static int netvsc_close(struct net_device *net) netif_tx_disable(net); - /* Make sure netvsc_set_multicast_list doesn't re-enable filter! */ - cancel_work_sync(&net_device_ctx->work); ret = rndis_filter_close(nvdev); if (ret != 0) { netdev_err(net, "unable to close device (ret %d).\n", ret); @@ -1563,7 +1536,6 @@ static int netvsc_probe(struct hv_device *dev, hv_set_drvdata(dev, net); INIT_DELAYED_WORK(&net_device_ctx->dwork, netvsc_link_change); - INIT_WORK(&net_device_ctx->work, do_set_multicast); spin_lock_init(&net_device_ctx->lock); INIT_LIST_HEAD(&net_device_ctx->reconfig_events); @@ -1633,7 +1605,6 @@ static int netvsc_remove(struct hv_device *dev) netif_device_detach(net); cancel_delayed_work_sync(&ndev_ctx->dwork); - cancel_work_sync(&ndev_ctx->work); /* * Call to the vsc driver to let it know that the device is being diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index f9d5b0b8209a..cb79cd081f42 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -31,6 +31,7 @@ #include "hyperv_net.h" +static void rndis_set_multicast(struct work_struct *w); #define RNDIS_EXT_LEN PAGE_SIZE struct rndis_request { @@ -76,6 +77,7 @@ static struct rndis_device *get_rndis_device(void) spin_lock_init(&device->request_lock); INIT_LIST_HEAD(&device->req_list); + INIT_WORK(&device->mcast_work, rndis_set_multicast); device->state = RNDIS_DEV_UNINITIALIZED; @@ -815,7 +817,8 @@ static int rndis_filter_query_link_speed(struct rndis_device *dev) return ret; } -int rndis_filter_set_packet_filter(struct rndis_device *dev, u32 new_filter) +static int rndis_filter_set_packet_filter(struct rndis_device *dev, + u32 new_filter) { struct rndis_request *request; struct rndis_set_request *set; @@ -846,6 +849,28 @@ int rndis_filter_set_packet_filter(struct rndis_device *dev, u32 new_filter) return ret; } +static void rndis_set_multicast(struct work_struct *w) +{ + struct rndis_device *rdev + = container_of(w, struct rndis_device, mcast_work); + + if (rdev->ndev->flags & IFF_PROMISC) + rndis_filter_set_packet_filter(rdev, + NDIS_PACKET_TYPE_PROMISCUOUS); + else + rndis_filter_set_packet_filter(rdev, + NDIS_PACKET_TYPE_BROADCAST | + NDIS_PACKET_TYPE_ALL_MULTICAST | + NDIS_PACKET_TYPE_DIRECTED); +} + +void rndis_filter_update(struct netvsc_device *nvdev) +{ + struct rndis_device *rdev = nvdev->extension; + + schedule_work(&rdev->mcast_work); +} + static int rndis_filter_init_device(struct rndis_device *dev) { struct rndis_request *request; @@ -973,6 +998,9 @@ static int rndis_filter_close_device(struct rndis_device *dev) if (dev->state != RNDIS_DEV_DATAINITIALIZED) return 0; + /* Make sure rndis_set_multicast doesn't re-enable filter! */ + cancel_work_sync(&dev->mcast_work); + ret = rndis_filter_set_packet_filter(dev, 0); if (ret == -ENODEV) ret = 0; From 8f9bebc33dd718283183582fc4a762e178552fb8 Mon Sep 17 00:00:00 2001 From: Paolo Valente Date: Mon, 5 Jun 2017 10:11:15 +0200 Subject: [PATCH 0612/1065] block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir Reported-by: Lee Tibbert Reported-by: Marco Piazza Signed-off-by: Paolo Valente Tested-by: Tomas Konir Tested-by: Lee Tibbert Tested-by: Marco Piazza Signed-off-by: Jens Axboe --- block/bfq-cgroup.c | 116 +++++++++++++++++++++++++++++++++++--------- block/bfq-iosched.c | 2 +- block/bfq-iosched.h | 23 +++++---- 3 files changed, 105 insertions(+), 36 deletions(-) diff --git a/block/bfq-cgroup.c b/block/bfq-cgroup.c index c8a32fb345cf..78b2e0db4fb2 100644 --- a/block/bfq-cgroup.c +++ b/block/bfq-cgroup.c @@ -52,7 +52,7 @@ BFQG_FLAG_FNS(idling) BFQG_FLAG_FNS(empty) #undef BFQG_FLAG_FNS -/* This should be called with the queue_lock held. */ +/* This should be called with the scheduler lock held. */ static void bfqg_stats_update_group_wait_time(struct bfqg_stats *stats) { unsigned long long now; @@ -67,7 +67,7 @@ static void bfqg_stats_update_group_wait_time(struct bfqg_stats *stats) bfqg_stats_clear_waiting(stats); } -/* This should be called with the queue_lock held. */ +/* This should be called with the scheduler lock held. */ static void bfqg_stats_set_start_group_wait_time(struct bfq_group *bfqg, struct bfq_group *curr_bfqg) { @@ -81,7 +81,7 @@ static void bfqg_stats_set_start_group_wait_time(struct bfq_group *bfqg, bfqg_stats_mark_waiting(stats); } -/* This should be called with the queue_lock held. */ +/* This should be called with the scheduler lock held. */ static void bfqg_stats_end_empty_time(struct bfqg_stats *stats) { unsigned long long now; @@ -203,12 +203,30 @@ struct bfq_group *bfqq_group(struct bfq_queue *bfqq) static void bfqg_get(struct bfq_group *bfqg) { - return blkg_get(bfqg_to_blkg(bfqg)); + bfqg->ref++; } void bfqg_put(struct bfq_group *bfqg) { - return blkg_put(bfqg_to_blkg(bfqg)); + bfqg->ref--; + + if (bfqg->ref == 0) + kfree(bfqg); +} + +static void bfqg_and_blkg_get(struct bfq_group *bfqg) +{ + /* see comments in bfq_bic_update_cgroup for why refcounting bfqg */ + bfqg_get(bfqg); + + blkg_get(bfqg_to_blkg(bfqg)); +} + +void bfqg_and_blkg_put(struct bfq_group *bfqg) +{ + bfqg_put(bfqg); + + blkg_put(bfqg_to_blkg(bfqg)); } void bfqg_stats_update_io_add(struct bfq_group *bfqg, struct bfq_queue *bfqq, @@ -312,7 +330,11 @@ void bfq_init_entity(struct bfq_entity *entity, struct bfq_group *bfqg) if (bfqq) { bfqq->ioprio = bfqq->new_ioprio; bfqq->ioprio_class = bfqq->new_ioprio_class; - bfqg_get(bfqg); + /* + * Make sure that bfqg and its associated blkg do not + * disappear before entity. + */ + bfqg_and_blkg_get(bfqg); } entity->parent = bfqg->my_entity; /* NULL for root group */ entity->sched_data = &bfqg->sched_data; @@ -399,6 +421,8 @@ struct blkg_policy_data *bfq_pd_alloc(gfp_t gfp, int node) return NULL; } + /* see comments in bfq_bic_update_cgroup for why refcounting */ + bfqg_get(bfqg); return &bfqg->pd; } @@ -426,7 +450,7 @@ void bfq_pd_free(struct blkg_policy_data *pd) struct bfq_group *bfqg = pd_to_bfqg(pd); bfqg_stats_exit(&bfqg->stats); - return kfree(bfqg); + bfqg_put(bfqg); } void bfq_pd_reset_stats(struct blkg_policy_data *pd) @@ -496,9 +520,10 @@ struct bfq_group *bfq_find_set_group(struct bfq_data *bfqd, * Move @bfqq to @bfqg, deactivating it from its old group and reactivating * it on the new one. Avoid putting the entity on the old group idle tree. * - * Must be called under the queue lock; the cgroup owning @bfqg must - * not disappear (by now this just means that we are called under - * rcu_read_lock()). + * Must be called under the scheduler lock, to make sure that the blkg + * owning @bfqg does not disappear (see comments in + * bfq_bic_update_cgroup on guaranteeing the consistency of blkg + * objects). */ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq, struct bfq_group *bfqg) @@ -519,16 +544,12 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq, bfq_deactivate_bfqq(bfqd, bfqq, false, false); else if (entity->on_st) bfq_put_idle_entity(bfq_entity_service_tree(entity), entity); - bfqg_put(bfqq_group(bfqq)); + bfqg_and_blkg_put(bfqq_group(bfqq)); - /* - * Here we use a reference to bfqg. We don't need a refcounter - * as the cgroup reference will not be dropped, so that its - * destroy() callback will not be invoked. - */ entity->parent = bfqg->my_entity; entity->sched_data = &bfqg->sched_data; - bfqg_get(bfqg); + /* pin down bfqg and its associated blkg */ + bfqg_and_blkg_get(bfqg); if (bfq_bfqq_busy(bfqq)) { bfq_pos_tree_add_move(bfqd, bfqq); @@ -545,8 +566,9 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq, * @bic: the bic to move. * @blkcg: the blk-cgroup to move to. * - * Move bic to blkcg, assuming that bfqd->queue is locked; the caller - * has to make sure that the reference to cgroup is valid across the call. + * Move bic to blkcg, assuming that bfqd->lock is held; which makes + * sure that the reference to cgroup is valid across the call (see + * comments in bfq_bic_update_cgroup on this issue) * * NOTE: an alternative approach might have been to store the current * cgroup in bfqq and getting a reference to it, reducing the lookup @@ -604,6 +626,57 @@ void bfq_bic_update_cgroup(struct bfq_io_cq *bic, struct bio *bio) goto out; bfqg = __bfq_bic_change_cgroup(bfqd, bic, bio_blkcg(bio)); + /* + * Update blkg_path for bfq_log_* functions. We cache this + * path, and update it here, for the following + * reasons. Operations on blkg objects in blk-cgroup are + * protected with the request_queue lock, and not with the + * lock that protects the instances of this scheduler + * (bfqd->lock). This exposes BFQ to the following sort of + * race. + * + * The blkg_lookup performed in bfq_get_queue, protected + * through rcu, may happen to return the address of a copy of + * the original blkg. If this is the case, then the + * bfqg_and_blkg_get performed in bfq_get_queue, to pin down + * the blkg, is useless: it does not prevent blk-cgroup code + * from destroying both the original blkg and all objects + * directly or indirectly referred by the copy of the + * blkg. + * + * On the bright side, destroy operations on a blkg invoke, as + * a first step, hooks of the scheduler associated with the + * blkg. And these hooks are executed with bfqd->lock held for + * BFQ. As a consequence, for any blkg associated with the + * request queue this instance of the scheduler is attached + * to, we are guaranteed that such a blkg is not destroyed, and + * that all the pointers it contains are consistent, while we + * are holding bfqd->lock. A blkg_lookup performed with + * bfqd->lock held then returns a fully consistent blkg, which + * remains consistent until this lock is held. + * + * Thanks to the last fact, and to the fact that: (1) bfqg has + * been obtained through a blkg_lookup in the above + * assignment, and (2) bfqd->lock is being held, here we can + * safely use the policy data for the involved blkg (i.e., the + * field bfqg->pd) to get to the blkg associated with bfqg, + * and then we can safely use any field of blkg. After we + * release bfqd->lock, even just getting blkg through this + * bfqg may cause dangling references to be traversed, as + * bfqg->pd may not exist any more. + * + * In view of the above facts, here we cache, in the bfqg, any + * blkg data we may need for this bic, and for its associated + * bfq_queue. As of now, we need to cache only the path of the + * blkg, which is used in the bfq_log_* functions. + * + * Finally, note that bfqg itself needs to be protected from + * destruction on the blkg_free of the original blkg (which + * invokes bfq_pd_free). We use an additional private + * refcounter for bfqg, to let it disappear only after no + * bfq_queue refers to it any longer. + */ + blkg_path(bfqg_to_blkg(bfqg), bfqg->blkg_path, sizeof(bfqg->blkg_path)); bic->blkcg_serial_nr = serial_nr; out: rcu_read_unlock(); @@ -640,8 +713,6 @@ static void bfq_reparent_leaf_entity(struct bfq_data *bfqd, * @bfqd: the device data structure with the root group. * @bfqg: the group to move from. * @st: the service tree with the entities. - * - * Needs queue_lock to be taken and reference to be valid over the call. */ static void bfq_reparent_active_entities(struct bfq_data *bfqd, struct bfq_group *bfqg, @@ -692,8 +763,7 @@ void bfq_pd_offline(struct blkg_policy_data *pd) /* * The idle tree may still contain bfq_queues belonging * to exited task because they never migrated to a different - * cgroup from the one being destroyed now. No one else - * can access them so it's safe to act without any lock. + * cgroup from the one being destroyed now. */ bfq_flush_idle_tree(st); diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index 08ce45096350..ed93da2462ab 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -3665,7 +3665,7 @@ void bfq_put_queue(struct bfq_queue *bfqq) kmem_cache_free(bfq_pool, bfqq); #ifdef CONFIG_BFQ_GROUP_IOSCHED - bfqg_put(bfqg); + bfqg_and_blkg_put(bfqg); #endif } diff --git a/block/bfq-iosched.h b/block/bfq-iosched.h index ae783c06dfd9..5c3bf9861492 100644 --- a/block/bfq-iosched.h +++ b/block/bfq-iosched.h @@ -759,6 +759,12 @@ struct bfq_group { /* must be the first member */ struct blkg_policy_data pd; + /* cached path for this blkg (see comments in bfq_bic_update_cgroup) */ + char blkg_path[128]; + + /* reference counter (see comments in bfq_bic_update_cgroup) */ + int ref; + struct bfq_entity entity; struct bfq_sched_data sched_data; @@ -838,7 +844,7 @@ struct bfq_group *bfq_find_set_group(struct bfq_data *bfqd, struct blkcg_gq *bfqg_to_blkg(struct bfq_group *bfqg); struct bfq_group *bfqq_group(struct bfq_queue *bfqq); struct bfq_group *bfq_create_group_hierarchy(struct bfq_data *bfqd, int node); -void bfqg_put(struct bfq_group *bfqg); +void bfqg_and_blkg_put(struct bfq_group *bfqg); #ifdef CONFIG_BFQ_GROUP_IOSCHED extern struct cftype bfq_blkcg_legacy_files[]; @@ -910,20 +916,13 @@ void bfq_add_bfqq_busy(struct bfq_data *bfqd, struct bfq_queue *bfqq); struct bfq_group *bfqq_group(struct bfq_queue *bfqq); #define bfq_log_bfqq(bfqd, bfqq, fmt, args...) do { \ - char __pbuf[128]; \ - \ - blkg_path(bfqg_to_blkg(bfqq_group(bfqq)), __pbuf, sizeof(__pbuf)); \ - blk_add_trace_msg((bfqd)->queue, "bfq%d%c %s " fmt, (bfqq)->pid, \ + blk_add_trace_msg((bfqd)->queue, "bfq%d%c %s " fmt, (bfqq)->pid,\ bfq_bfqq_sync((bfqq)) ? 'S' : 'A', \ - __pbuf, ##args); \ + bfqq_group(bfqq)->blkg_path, ##args); \ } while (0) -#define bfq_log_bfqg(bfqd, bfqg, fmt, args...) do { \ - char __pbuf[128]; \ - \ - blkg_path(bfqg_to_blkg(bfqg), __pbuf, sizeof(__pbuf)); \ - blk_add_trace_msg((bfqd)->queue, "%s " fmt, __pbuf, ##args); \ -} while (0) +#define bfq_log_bfqg(bfqd, bfqg, fmt, args...) \ + blk_add_trace_msg((bfqd)->queue, "%s " fmt, (bfqg)->blkg_path, ##args) #else /* CONFIG_BFQ_GROUP_IOSCHED */ From 0bed865060836dc5f26b68052de0a504d66d9fae Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 8 Jun 2017 11:51:59 -0400 Subject: [PATCH 0613/1065] net: Fix build regression in rtl8723bs staging driver. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c: In function ‘rtw_cfg80211_add_monitor_if’: drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2670:10: error: ‘struct net_device’ has no member named ‘destructor’ mon_ndev->destructor = rtw_ndev_destructor; ^ Signed-off-by: David S. Miller --- drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 3 ++- drivers/staging/rtl8723bs/os_dep/os_intfs.c | 2 -- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c index 36c3189fc4b7..bd4352fe2de3 100644 --- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c +++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c @@ -2667,7 +2667,8 @@ static int rtw_cfg80211_add_monitor_if (struct adapter *padapter, char *name, st mon_ndev->type = ARPHRD_IEEE80211_RADIOTAP; strncpy(mon_ndev->name, name, IFNAMSIZ); mon_ndev->name[IFNAMSIZ - 1] = 0; - mon_ndev->destructor = rtw_ndev_destructor; + mon_ndev->needs_free_netdev = true; + mon_ndev->priv_destructor = rtw_ndev_destructor; mon_ndev->netdev_ops = &rtw_cfg80211_monitor_if_ops; diff --git a/drivers/staging/rtl8723bs/os_dep/os_intfs.c b/drivers/staging/rtl8723bs/os_dep/os_intfs.c index f83cfc76505c..021589913681 100644 --- a/drivers/staging/rtl8723bs/os_dep/os_intfs.c +++ b/drivers/staging/rtl8723bs/os_dep/os_intfs.c @@ -1207,8 +1207,6 @@ void rtw_ndev_destructor(struct net_device *ndev) if (ndev->ieee80211_ptr) kfree((u8 *)ndev->ieee80211_ptr); - - free_netdev(ndev); } void rtw_dev_unload(struct adapter *padapter) From 3619ef76b37d4803bc9daee9d03d82c8526db378 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 8 Jun 2017 16:31:01 +0900 Subject: [PATCH 0614/1065] perf annotate: Fix symbolic link of build-id cache The commit 6ebd2547dd24 ("perf annotate: Fix a bug following symbolic link of a build-id file") changed to use dirname to follow the symlink. But it only considers new-style build-id cache names so old names fail on readlink() and force to use system path which might not available. Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Peter Zijlstra Cc: Taeung Song Cc: Wang Nan Cc: kernel-team@lge.com Fixes: 6ebd2547dd24 ("perf annotate: Fix a bug following symbolic link of a build-id file") Link: http://lkml.kernel.org/r/20170608073109.30699-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/annotate.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c index 1367d7e35242..df4486c3a2fa 100644 --- a/tools/perf/util/annotate.c +++ b/tools/perf/util/annotate.c @@ -1321,6 +1321,7 @@ static int dso__disassemble_filename(struct dso *dso, char *filename, size_t fil char linkname[PATH_MAX]; char *build_id_filename; char *build_id_path = NULL; + char *pos; if (dso->symtab_type == DSO_BINARY_TYPE__KALLSYMS && !dso__is_kcore(dso)) @@ -1340,7 +1341,14 @@ static int dso__disassemble_filename(struct dso *dso, char *filename, size_t fil if (!build_id_path) return -1; - dirname(build_id_path); + /* + * old style build-id cache has name of XX/XXXXXXX.. while + * new style has XX/XXXXXXX../{elf,kallsyms,vdso}. + * extract the build-id part of dirname in the new style only. + */ + pos = strrchr(build_id_path, '/'); + if (pos && strlen(pos) < SBUILD_ID_SIZE - 2) + dirname(build_id_path); if (dso__is_kcore(dso) || readlink(build_id_path, linkname, sizeof(linkname)) < 0 || From 44ad6b8852529eb39066edbedc027a6901da6803 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 8 Jun 2017 16:31:02 +0900 Subject: [PATCH 0615/1065] perf tools: Fix a memory leak in __open_dso() The 'name' variable should be freed on the error path. Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Peter Zijlstra Cc: Wang Nan Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/dso.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c index b27d127cdf68..1f29e4fe7af0 100644 --- a/tools/perf/util/dso.c +++ b/tools/perf/util/dso.c @@ -412,8 +412,10 @@ static int __open_dso(struct dso *dso, struct machine *machine) return -EINVAL; } - if (!is_regular_file(name)) + if (!is_regular_file(name)) { + free(name); return -EINVAL; + } fd = do_open(name); free(name); From 42b3fa670825983fc8bd0ac7b80cc84ae3abb75b Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 8 Jun 2017 16:31:03 +0900 Subject: [PATCH 0616/1065] perf tools: Introduce dso__decompress_kmodule_{fd,path} Move decompress_kmodule() to util/dso.c and split it into two functions returning fd and (decompressed) file path. The existing user only wants the fd version but the path version will be used soon. Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Peter Zijlstra Cc: Wang Nan Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/dso.c | 58 ++++++++++++++++++++++++++++++++++++ tools/perf/util/dso.h | 6 ++++ tools/perf/util/symbol-elf.c | 36 +--------------------- 3 files changed, 65 insertions(+), 35 deletions(-) diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c index 1f29e4fe7af0..b346b8eba65c 100644 --- a/tools/perf/util/dso.c +++ b/tools/perf/util/dso.c @@ -248,6 +248,64 @@ bool dso__needs_decompress(struct dso *dso) dso->symtab_type == DSO_BINARY_TYPE__GUEST_KMODULE_COMP; } +static int decompress_kmodule(struct dso *dso, const char *name, char *tmpbuf) +{ + int fd = -1; + struct kmod_path m; + + if (!dso__needs_decompress(dso)) + return -1; + + if (kmod_path__parse_ext(&m, dso->long_name)) + return -1; + + if (!m.comp) + goto out; + + fd = mkstemp(tmpbuf); + if (fd < 0) { + dso->load_errno = errno; + goto out; + } + + if (!decompress_to_file(m.ext, name, fd)) { + dso->load_errno = DSO_LOAD_ERRNO__DECOMPRESSION_FAILURE; + close(fd); + fd = -1; + } + +out: + free(m.ext); + return fd; +} + +int dso__decompress_kmodule_fd(struct dso *dso, const char *name) +{ + char tmpbuf[] = KMOD_DECOMP_NAME; + int fd; + + fd = decompress_kmodule(dso, name, tmpbuf); + unlink(tmpbuf); + return fd; +} + +int dso__decompress_kmodule_path(struct dso *dso, const char *name, + char *pathname, size_t len) +{ + char tmpbuf[] = KMOD_DECOMP_NAME; + int fd; + + fd = decompress_kmodule(dso, name, tmpbuf); + if (fd < 0) { + unlink(tmpbuf); + return -1; + } + + strncpy(pathname, tmpbuf, len); + close(fd); + return 0; +} + /* * Parses kernel module specified in @path and updates * @m argument like: diff --git a/tools/perf/util/dso.h b/tools/perf/util/dso.h index 5fe2ab5877bd..bd061ba7b47c 100644 --- a/tools/perf/util/dso.h +++ b/tools/perf/util/dso.h @@ -244,6 +244,12 @@ bool is_supported_compression(const char *ext); bool is_kernel_module(const char *pathname, int cpumode); bool decompress_to_file(const char *ext, const char *filename, int output_fd); bool dso__needs_decompress(struct dso *dso); +int dso__decompress_kmodule_fd(struct dso *dso, const char *name); +int dso__decompress_kmodule_path(struct dso *dso, const char *name, + char *pathname, size_t len); + +#define KMOD_DECOMP_NAME "/tmp/perf-kmod-XXXXXX" +#define KMOD_DECOMP_LEN sizeof(KMOD_DECOMP_NAME) struct kmod_path { char *name; diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index 1fb2efae4f02..d342e771dbad 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -637,40 +637,6 @@ static int dso__swap_init(struct dso *dso, unsigned char eidata) return 0; } -static int decompress_kmodule(struct dso *dso, const char *name, - enum dso_binary_type type) -{ - int fd = -1; - char tmpbuf[] = "/tmp/perf-kmod-XXXXXX"; - struct kmod_path m; - - if (type != DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP && - type != DSO_BINARY_TYPE__GUEST_KMODULE_COMP && - type != DSO_BINARY_TYPE__BUILD_ID_CACHE) - return -1; - - if (kmod_path__parse_ext(&m, dso->long_name) || !m.comp) - return -1; - - fd = mkstemp(tmpbuf); - if (fd < 0) { - dso->load_errno = errno; - goto out; - } - - if (!decompress_to_file(m.ext, name, fd)) { - dso->load_errno = DSO_LOAD_ERRNO__DECOMPRESSION_FAILURE; - close(fd); - fd = -1; - } - - unlink(tmpbuf); - -out: - free(m.ext); - return fd; -} - bool symsrc__possibly_runtime(struct symsrc *ss) { return ss->dynsym || ss->opdsec; @@ -702,7 +668,7 @@ int symsrc__init(struct symsrc *ss, struct dso *dso, const char *name, int fd; if (dso__needs_decompress(dso)) { - fd = decompress_kmodule(dso, name, type); + fd = dso__decompress_kmodule_fd(dso, name); if (fd < 0) return -1; } else { From 3c84fd53044f98017271101b59a21ddb20fb312b Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 8 Jun 2017 16:31:04 +0900 Subject: [PATCH 0617/1065] perf annotate: Use dso__decompress_kmodule_path() Convert open-coded decompress routine to use the function. Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Peter Zijlstra Cc: Wang Nan Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/annotate.c | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c index df4486c3a2fa..ddbd56df9187 100644 --- a/tools/perf/util/annotate.c +++ b/tools/perf/util/annotate.c @@ -1431,31 +1431,10 @@ int symbol__disassemble(struct symbol *sym, struct map *map, const char *arch_na sizeof(symfs_filename)); } } else if (dso__needs_decompress(dso)) { - char tmp[PATH_MAX]; - struct kmod_path m; - int fd; - bool ret; + char tmp[KMOD_DECOMP_LEN]; - if (kmod_path__parse_ext(&m, symfs_filename)) - goto out; - - snprintf(tmp, PATH_MAX, "/tmp/perf-kmod-XXXXXX"); - - fd = mkstemp(tmp); - if (fd < 0) { - free(m.ext); - goto out; - } - - ret = decompress_to_file(m.ext, symfs_filename, fd); - - if (ret) - pr_err("Cannot decompress %s %s\n", m.ext, symfs_filename); - - free(m.ext); - close(fd); - - if (!ret) + if (dso__decompress_kmodule_path(dso, symfs_filename, + tmp, sizeof(tmp)) < 0) goto out; strcpy(symfs_filename, tmp); From 1d6b3c9ba756a5134fd7ad1959acac776d17404b Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 8 Jun 2017 16:31:05 +0900 Subject: [PATCH 0618/1065] perf tools: Decompress kernel module when reading DSO data Currently perf decompresses kernel modules when loading the symbol table but it missed to do it when reading raw data. Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Peter Zijlstra Cc: Wang Nan Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/dso.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c index b346b8eba65c..c63525d845c5 100644 --- a/tools/perf/util/dso.c +++ b/tools/perf/util/dso.c @@ -475,7 +475,23 @@ static int __open_dso(struct dso *dso, struct machine *machine) return -EINVAL; } + if (dso__needs_decompress(dso)) { + char newpath[KMOD_DECOMP_LEN]; + size_t len = sizeof(newpath); + + if (dso__decompress_kmodule_path(dso, name, newpath, len) < 0) { + free(name); + return -dso->load_errno; + } + + strcpy(name, newpath); + } + fd = do_open(name); + + if (dso__needs_decompress(dso)) + unlink(name); + free(name); return fd; } From 8ba29adf9a7cdff3c7283d5fc0dcf5e777d3b40f Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 8 Jun 2017 16:31:06 +0900 Subject: [PATCH 0619/1065] perf tools: Consolidate error path in __open_dso() On failure, it should free the 'name', so clean up the error path using goto. Signed-off-by: Namhyung Kim Suggested-by: Arnaldo Carvalho de Melo Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Peter Zijlstra Cc: Wang Nan Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/dso.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c index c63525d845c5..4e7ab611377a 100644 --- a/tools/perf/util/dso.c +++ b/tools/perf/util/dso.c @@ -454,7 +454,7 @@ static int do_open(char *name) static int __open_dso(struct dso *dso, struct machine *machine) { - int fd; + int fd = -EINVAL; char *root_dir = (char *)""; char *name = malloc(PATH_MAX); @@ -465,23 +465,19 @@ static int __open_dso(struct dso *dso, struct machine *machine) root_dir = machine->root_dir; if (dso__read_binary_type_filename(dso, dso->binary_type, - root_dir, name, PATH_MAX)) { - free(name); - return -EINVAL; - } + root_dir, name, PATH_MAX)) + goto out; - if (!is_regular_file(name)) { - free(name); - return -EINVAL; - } + if (!is_regular_file(name)) + goto out; if (dso__needs_decompress(dso)) { char newpath[KMOD_DECOMP_LEN]; size_t len = sizeof(newpath); if (dso__decompress_kmodule_path(dso, name, newpath, len) < 0) { - free(name); - return -dso->load_errno; + fd = -dso->load_errno; + goto out; } strcpy(name, newpath); @@ -492,6 +488,7 @@ static int __open_dso(struct dso *dso, struct machine *machine) if (dso__needs_decompress(dso)) unlink(name); +out: free(name); return fd; } From 94df1040b1e6aacd8dec0ba3c61d7e77cd695f26 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 8 Jun 2017 16:31:07 +0900 Subject: [PATCH 0620/1065] perf tests: Decompress kernel module before objdump If a kernel modules is compressed, it should be decompressed before running objdump to parse binary data correctly. This fixes a failure of object code reading test for me. Signed-off-by: Namhyung Kim Acked-by: Adrian Hunter Acked-by: Jiri Olsa Cc: David Ahern Cc: Peter Zijlstra Cc: Wang Nan Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/code-reading.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/tools/perf/tests/code-reading.c b/tools/perf/tests/code-reading.c index 1f14e7612cbb..94b7c7b02bde 100644 --- a/tools/perf/tests/code-reading.c +++ b/tools/perf/tests/code-reading.c @@ -229,6 +229,8 @@ static int read_object_code(u64 addr, size_t len, u8 cpumode, unsigned char buf2[BUFSZ]; size_t ret_len; u64 objdump_addr; + const char *objdump_name; + char decomp_name[KMOD_DECOMP_LEN]; int ret; pr_debug("Reading object code for memory address: %#"PRIx64"\n", addr); @@ -289,9 +291,25 @@ static int read_object_code(u64 addr, size_t len, u8 cpumode, state->done[state->done_cnt++] = al.map->start; } + objdump_name = al.map->dso->long_name; + if (dso__needs_decompress(al.map->dso)) { + if (dso__decompress_kmodule_path(al.map->dso, objdump_name, + decomp_name, + sizeof(decomp_name)) < 0) { + pr_debug("decompression failed\n"); + return -1; + } + + objdump_name = decomp_name; + } + /* Read the object code using objdump */ objdump_addr = map__rip_2objdump(al.map, al.addr); - ret = read_via_objdump(al.map->dso->long_name, objdump_addr, buf2, len); + ret = read_via_objdump(objdump_name, objdump_addr, buf2, len); + + if (dso__needs_decompress(al.map->dso)) + unlink(objdump_name); + if (ret > 0) { /* * The kernel maps are inaccurate - assume objdump is right in From c25ec42f846f702f8f532fbc890171e3a1f6ec85 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 8 Jun 2017 16:31:08 +0900 Subject: [PATCH 0621/1065] perf symbols: Keep DSO->symtab_type after decompress The symsrc__init() overwrites dso->symtab_type as symsrc->type in dso__load_sym(). But for compressed kernel modules in the build-id cache, it should have original symtab type to be decompressed as needed. This fixes perf annotate to show disassembly of the function properly. Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Peter Zijlstra Cc: Wang Nan Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol-elf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index d342e771dbad..502505cf236a 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -671,6 +671,8 @@ int symsrc__init(struct symsrc *ss, struct dso *dso, const char *name, fd = dso__decompress_kmodule_fd(dso, name); if (fd < 0) return -1; + + type = dso->symtab_type; } else { fd = open(name, O_RDONLY); if (fd < 0) { From b89fe63fbafe307fb72546f7a2320380bf41bdd4 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 8 Jun 2017 16:31:09 +0900 Subject: [PATCH 0622/1065] perf symbols: Kill dso__build_id_is_kmod() The commit e7ee40475760 ("perf symbols: Fix symbols searching for module in buildid-cache") added the function to check kernel modules reside in the build-id cache. This was because there's no way to identify a DSO which is actually a kernel module. So it searched linkname of the file and find ".ko" suffix. But this does not work for compressed kernel modules and now such DSOs hCcave correct symtab_type now. So no need to check it anymore. This patch essentially reverts the commit. Signed-off-by: Namhyung Kim Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Peter Zijlstra Cc: Wang Nan Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-10-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/build-id.c | 45 -------------------------------------- tools/perf/util/build-id.h | 1 - tools/perf/util/symbol.c | 4 ---- 3 files changed, 50 deletions(-) diff --git a/tools/perf/util/build-id.c b/tools/perf/util/build-id.c index 168cc49654e7..e0148b081bdf 100644 --- a/tools/perf/util/build-id.c +++ b/tools/perf/util/build-id.c @@ -278,51 +278,6 @@ char *dso__build_id_filename(const struct dso *dso, char *bf, size_t size) return bf; } -bool dso__build_id_is_kmod(const struct dso *dso, char *bf, size_t size) -{ - char *id_name = NULL, *ch; - struct stat sb; - char sbuild_id[SBUILD_ID_SIZE]; - - if (!dso->has_build_id) - goto err; - - build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id); - id_name = build_id_cache__linkname(sbuild_id, NULL, 0); - if (!id_name) - goto err; - if (access(id_name, F_OK)) - goto err; - if (lstat(id_name, &sb) == -1) - goto err; - if ((size_t)sb.st_size > size - 1) - goto err; - if (readlink(id_name, bf, size - 1) < 0) - goto err; - - bf[sb.st_size] = '\0'; - - /* - * link should be: - * ../../lib/modules/4.4.0-rc4/kernel/net/ipv4/netfilter/nf_nat_ipv4.ko/a09fe3eb3147dafa4e3b31dbd6257e4d696bdc92 - */ - ch = strrchr(bf, '/'); - if (!ch) - goto err; - if (ch - 3 < bf) - goto err; - - free(id_name); - return strncmp(".ko", ch - 3, 3) == 0; -err: - pr_err("Invalid build id: %s\n", id_name ? : - dso->long_name ? : - dso->short_name ? : - "[unknown]"); - free(id_name); - return false; -} - #define dsos__for_each_with_build_id(pos, head) \ list_for_each_entry(pos, head, node) \ if (!pos->has_build_id) \ diff --git a/tools/perf/util/build-id.h b/tools/perf/util/build-id.h index 8a89b195c1fc..96690a55c62c 100644 --- a/tools/perf/util/build-id.h +++ b/tools/perf/util/build-id.h @@ -17,7 +17,6 @@ char *build_id_cache__kallsyms_path(const char *sbuild_id, char *bf, size_t size); char *dso__build_id_filename(const struct dso *dso, char *bf, size_t size); -bool dso__build_id_is_kmod(const struct dso *dso, char *bf, size_t size); int build_id__mark_dso_hit(struct perf_tool *tool, union perf_event *event, struct perf_sample *sample, struct perf_evsel *evsel, diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 8f2b068ff756..e7a98dbd2aed 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -1562,10 +1562,6 @@ int dso__load(struct dso *dso, struct map *map) if (!runtime_ss && syms_ss) runtime_ss = syms_ss; - if (syms_ss && syms_ss->type == DSO_BINARY_TYPE__BUILD_ID_CACHE) - if (dso__build_id_is_kmod(dso, name, PATH_MAX)) - kmod = true; - if (syms_ss) ret = dso__load_sym(dso, map, syms_ss, runtime_ss, kmod); else From 0db47e3d323411beeb6ea97f2c4d19395c91fd8b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 8 Jun 2017 09:54:24 +0200 Subject: [PATCH 0623/1065] ila_xlat: add missing hash secret initialization While discussing the possible merits of clang warning about unused initialized functions, I found one function that was clearly meant to be called but never actually is. __ila_hash_secret_init() initializes the hash value for the ila locator, apparently this is intended to prevent hash collision attacks, but this ends up being a read-only zero constant since there is no caller. I could find no indication of why it was never called, the earliest patch submission for the module already was like this. If my interpretation is right, we certainly want to backport the patch to stable kernels as well. I considered adding it to the ila_xlat_init callback, but for best effect the random data is read as late as possible, just before it is first used. The underlying net_get_random_once() is already highly optimized to avoid overhead when called frequently. Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility") Cc: stable@vger.kernel.org Link: https://www.spinics.net/lists/kernel/msg2527243.html Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- net/ipv6/ila/ila_xlat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/ila/ila_xlat.c b/net/ipv6/ila/ila_xlat.c index 2fd5ca151dcf..77f7f8c7d93d 100644 --- a/net/ipv6/ila/ila_xlat.c +++ b/net/ipv6/ila/ila_xlat.c @@ -62,6 +62,7 @@ static inline u32 ila_locator_hash(struct ila_locator loc) { u32 *v = (u32 *)loc.v32; + __ila_hash_secret_init(); return jhash_2words(v[0], v[1], hashrnd); } From f9f314f323951a33d8b4a4f63f7d04b7f3bc0603 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 8 Jun 2017 15:37:44 -0300 Subject: [PATCH 0624/1065] [media] media/cec.h: use IS_REACHABLE instead of IS_ENABLED Fix messages like this: adv7842.c:(.text+0x2edadd): undefined reference to `cec_unregister_adapter' when CEC_CORE=m but the driver including media/cec.h is built-in. In that case the static inlines provided in media/cec.h should be used by that driver. Reported-by: Randy Dunlap Reported-by: kbuild test robot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/cec.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/media/cec.h b/include/media/cec.h index bfa88d4d67e1..201f060978da 100644 --- a/include/media/cec.h +++ b/include/media/cec.h @@ -206,7 +206,7 @@ static inline bool cec_is_sink(const struct cec_adapter *adap) #define cec_phys_addr_exp(pa) \ ((pa) >> 12), ((pa) >> 8) & 0xf, ((pa) >> 4) & 0xf, (pa) & 0xf -#if IS_ENABLED(CONFIG_CEC_CORE) +#if IS_REACHABLE(CONFIG_CEC_CORE) struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv, const char *name, u32 caps, u8 available_las); int cec_register_adapter(struct cec_adapter *adap, struct device *parent); From daa6630a310fe2ad90ce5f7d2d196cd0353ef4fa Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 8 Jun 2017 10:37:45 +0200 Subject: [PATCH 0625/1065] openvswitch: warn about missing first netlink attribute The first netlink attribute (value 0) must always be defined as none/unspec. Because we cannot change an existing UAPI, I add a comment to point the mistake and avoid to propagate it in a new ovs API in the future. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/uapi/linux/openvswitch.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index 61b7d36dfe34..156ee4cab82e 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -343,6 +343,7 @@ enum ovs_key_attr { #define OVS_KEY_ATTR_MAX (__OVS_KEY_ATTR_MAX - 1) enum ovs_tunnel_key_attr { + /* OVS_TUNNEL_KEY_ATTR_NONE, standard nl API requires this attribute! */ OVS_TUNNEL_KEY_ATTR_ID, /* be64 Tunnel ID */ OVS_TUNNEL_KEY_ATTR_IPV4_SRC, /* be32 src IP address. */ OVS_TUNNEL_KEY_ATTR_IPV4_DST, /* be32 dst IP address. */ From c7c550670afda2e16f9e2d06a1473885312eb6b5 Mon Sep 17 00:00:00 2001 From: Thibaut Collet Date: Thu, 8 Jun 2017 11:18:11 +0200 Subject: [PATCH 0626/1065] bonding: fix 802.3ad support for 5G and 50G speeds This patch adds [5|50] Gbps enum definition, and fixes aggregated bandwidth calculation based on above slave links. Fixes: c9a70d43461d ("net-next: ethtool: Added port speed macros.") Signed-off-by: Thibaut Collet Signed-off-by: Nicolas Dichtel Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index b44a6aeb346d..d1b09be63ba4 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -90,10 +90,12 @@ enum ad_link_speed_type { AD_LINK_SPEED_100MBPS, AD_LINK_SPEED_1000MBPS, AD_LINK_SPEED_2500MBPS, + AD_LINK_SPEED_5000MBPS, AD_LINK_SPEED_10000MBPS, AD_LINK_SPEED_20000MBPS, AD_LINK_SPEED_25000MBPS, AD_LINK_SPEED_40000MBPS, + AD_LINK_SPEED_50000MBPS, AD_LINK_SPEED_56000MBPS, AD_LINK_SPEED_100000MBPS, }; @@ -259,10 +261,12 @@ static inline int __check_agg_selection_timer(struct port *port) * %AD_LINK_SPEED_100MBPS, * %AD_LINK_SPEED_1000MBPS, * %AD_LINK_SPEED_2500MBPS, + * %AD_LINK_SPEED_5000MBPS, * %AD_LINK_SPEED_10000MBPS * %AD_LINK_SPEED_20000MBPS * %AD_LINK_SPEED_25000MBPS * %AD_LINK_SPEED_40000MBPS + * %AD_LINK_SPEED_50000MBPS * %AD_LINK_SPEED_56000MBPS * %AD_LINK_SPEED_100000MBPS */ @@ -296,6 +300,10 @@ static u16 __get_link_speed(struct port *port) speed = AD_LINK_SPEED_2500MBPS; break; + case SPEED_5000: + speed = AD_LINK_SPEED_5000MBPS; + break; + case SPEED_10000: speed = AD_LINK_SPEED_10000MBPS; break; @@ -312,6 +320,10 @@ static u16 __get_link_speed(struct port *port) speed = AD_LINK_SPEED_40000MBPS; break; + case SPEED_50000: + speed = AD_LINK_SPEED_50000MBPS; + break; + case SPEED_56000: speed = AD_LINK_SPEED_56000MBPS; break; @@ -707,6 +719,9 @@ static u32 __get_agg_bandwidth(struct aggregator *aggregator) case AD_LINK_SPEED_2500MBPS: bandwidth = nports * 2500; break; + case AD_LINK_SPEED_5000MBPS: + bandwidth = nports * 5000; + break; case AD_LINK_SPEED_10000MBPS: bandwidth = nports * 10000; break; @@ -719,6 +734,9 @@ static u32 __get_agg_bandwidth(struct aggregator *aggregator) case AD_LINK_SPEED_40000MBPS: bandwidth = nports * 40000; break; + case AD_LINK_SPEED_50000MBPS: + bandwidth = nports * 50000; + break; case AD_LINK_SPEED_56000MBPS: bandwidth = nports * 56000; break; From 3fcd64cfa0e9cb72b99aaba5c6bc13af9c03417f Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 8 Jun 2017 11:18:12 +0200 Subject: [PATCH 0627/1065] bonding: fix 802.3ad support for 14G speed This patch adds 14 Gbps enum definition, and fixes aggregated bandwidth calculation based on above slave links. Fixes: 0d7e2d2166f6 ("IB/ipoib: add get_link_ksettings in ethtool") Signed-off-by: Nicolas Dichtel Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index d1b09be63ba4..e5386ab706ec 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -92,6 +92,7 @@ enum ad_link_speed_type { AD_LINK_SPEED_2500MBPS, AD_LINK_SPEED_5000MBPS, AD_LINK_SPEED_10000MBPS, + AD_LINK_SPEED_14000MBPS, AD_LINK_SPEED_20000MBPS, AD_LINK_SPEED_25000MBPS, AD_LINK_SPEED_40000MBPS, @@ -263,6 +264,7 @@ static inline int __check_agg_selection_timer(struct port *port) * %AD_LINK_SPEED_2500MBPS, * %AD_LINK_SPEED_5000MBPS, * %AD_LINK_SPEED_10000MBPS + * %AD_LINK_SPEED_14000MBPS, * %AD_LINK_SPEED_20000MBPS * %AD_LINK_SPEED_25000MBPS * %AD_LINK_SPEED_40000MBPS @@ -308,6 +310,10 @@ static u16 __get_link_speed(struct port *port) speed = AD_LINK_SPEED_10000MBPS; break; + case SPEED_14000: + speed = AD_LINK_SPEED_14000MBPS; + break; + case SPEED_20000: speed = AD_LINK_SPEED_20000MBPS; break; @@ -725,6 +731,9 @@ static u32 __get_agg_bandwidth(struct aggregator *aggregator) case AD_LINK_SPEED_10000MBPS: bandwidth = nports * 10000; break; + case AD_LINK_SPEED_14000MBPS: + bandwidth = nports * 14000; + break; case AD_LINK_SPEED_20000MBPS: bandwidth = nports * 20000; break; From 297fb414d0d190ca82bf0b46fb19d7fda1598737 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 8 Jun 2017 11:18:13 +0200 Subject: [PATCH 0628/1065] ethtool.h: remind to update 802.3ad when adding new speeds Each time a new speed is added, the bonding 802.3ad isn't updated. Add a comment to remind the developer to update this driver. Signed-off-by: Nicolas Dichtel Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index d179d7767f51..7d4a594d5d58 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1486,8 +1486,10 @@ enum ethtool_link_mode_bit_indices { * it was forced up into this mode or autonegotiated. */ -/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal. */ -/* Update drivers/net/phy/phy.c:phy_speed_to_str() when adding new values */ +/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal. + * Update drivers/net/phy/phy.c:phy_speed_to_str() and + * drivers/net/bonding/bond_3ad.c:__get_link_speed() when adding new values. + */ #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 From 78a5a93c1eeb4e6933d1f62b33e5496d53b46c5a Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 8 Jun 2017 19:06:25 +0200 Subject: [PATCH 0629/1065] bpf, tests: fix endianness selection I noticed that test_l4lb was failing in selftests: # ./test_progs test_pkt_access:PASS:ipv4 77 nsec test_pkt_access:PASS:ipv6 44 nsec test_xdp:PASS:ipv4 2933 nsec test_xdp:PASS:ipv6 1500 nsec test_l4lb:PASS:ipv4 377 nsec test_l4lb:PASS:ipv6 544 nsec test_l4lb:FAIL:stats 6297600000 200000 test_tcp_estats:PASS: 0 nsec Summary: 7 PASSED, 1 FAILED Tracking down the issue actually revealed that endianness selection in bpf_endian.h is broken when compiled with clang with bpf target. test_pkt_access.c, test_l4lb.c is compiled with __BYTE_ORDER as __BIG_ENDIAN, test_xdp.c as __LITTLE_ENDIAN! test_l4lb noticeably fails, because the test accounts bytes via bpf_ntohs(ip6h->payload_len) and bpf_ntohs(iph->tot_len), and compares them against a defined value and given a wrong endianness, the test outcome is different, of course. Turns out that there are actually two bugs: i) when we do __BYTE_ORDER comparison with __LITTLE_ENDIAN/__BIG_ENDIAN, then depending on the include order we see different outcomes. Reason is that __BYTE_ORDER is undefined due to missing endian.h include. Before we include the asm/byteorder.h (e.g. through linux/in.h), then __BYTE_ORDER equals __LITTLE_ENDIAN since both are undefined, after the include which correctly pulls in linux/byteorder/little_endian.h, __LITTLE_ENDIAN is defined, but given __BYTE_ORDER is still undefined, we match on __BYTE_ORDER equals to __BIG_ENDIAN since __BIG_ENDIAN is also undefined at that point, sigh. ii) But even that would be wrong, since when compiling the test cases with clang, one can select between bpfeb and bpfel targets for cross compilation. Hence, we can also not rely on what the system's endian.h provides, but we need to look at the compiler's defined endianness. The compiler defines __BYTE_ORDER__, and we can match __ORDER_LITTLE_ENDIAN__ and __ORDER_BIG_ENDIAN__, which also reflects targets bpf (native), bpfel, bpfeb correctly, thus really only rely on that. After patch: # ./test_progs test_pkt_access:PASS:ipv4 74 nsec test_pkt_access:PASS:ipv6 42 nsec test_xdp:PASS:ipv4 2340 nsec test_xdp:PASS:ipv6 1461 nsec test_l4lb:PASS:ipv4 400 nsec test_l4lb:PASS:ipv6 530 nsec test_tcp_estats:PASS: 0 nsec Summary: 7 PASSED, 0 FAILED Fixes: 43bcf707ccdc ("bpf: fix _htons occurences in test_progs") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- tools/testing/selftests/bpf/bpf_endian.h | 41 +++++++++++++++++------- 1 file changed, 30 insertions(+), 11 deletions(-) diff --git a/tools/testing/selftests/bpf/bpf_endian.h b/tools/testing/selftests/bpf/bpf_endian.h index 19d0604f8694..487cbfb89beb 100644 --- a/tools/testing/selftests/bpf/bpf_endian.h +++ b/tools/testing/selftests/bpf/bpf_endian.h @@ -1,23 +1,42 @@ #ifndef __BPF_ENDIAN__ #define __BPF_ENDIAN__ -#include +#include -#if __BYTE_ORDER == __LITTLE_ENDIAN -# define __bpf_ntohs(x) __builtin_bswap16(x) -# define __bpf_htons(x) __builtin_bswap16(x) -#elif __BYTE_ORDER == __BIG_ENDIAN -# define __bpf_ntohs(x) (x) -# define __bpf_htons(x) (x) +/* LLVM's BPF target selects the endianness of the CPU + * it compiles on, or the user specifies (bpfel/bpfeb), + * respectively. The used __BYTE_ORDER__ is defined by + * the compiler, we cannot rely on __BYTE_ORDER from + * libc headers, since it doesn't reflect the actual + * requested byte order. + * + * Note, LLVM's BPF target has different __builtin_bswapX() + * semantics. It does map to BPF_ALU | BPF_END | BPF_TO_BE + * in bpfel and bpfeb case, which means below, that we map + * to cpu_to_be16(). We could use it unconditionally in BPF + * case, but better not rely on it, so that this header here + * can be used from application and BPF program side, which + * use different targets. + */ +#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ +# define __bpf_ntohs(x) __builtin_bswap16(x) +# define __bpf_htons(x) __builtin_bswap16(x) +# define __bpf_constant_ntohs(x) ___constant_swab16(x) +# define __bpf_constant_htons(x) ___constant_swab16(x) +#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ +# define __bpf_ntohs(x) (x) +# define __bpf_htons(x) (x) +# define __bpf_constant_ntohs(x) (x) +# define __bpf_constant_htons(x) (x) #else -# error "Fix your __BYTE_ORDER?!" +# error "Fix your compiler's __BYTE_ORDER__?!" #endif #define bpf_htons(x) \ (__builtin_constant_p(x) ? \ - __constant_htons(x) : __bpf_htons(x)) + __bpf_constant_htons(x) : __bpf_htons(x)) #define bpf_ntohs(x) \ (__builtin_constant_p(x) ? \ - __constant_ntohs(x) : __bpf_ntohs(x)) + __bpf_constant_ntohs(x) : __bpf_ntohs(x)) -#endif +#endif /* __BPF_ENDIAN__ */ From 097d3c9508dc58286344e4a22b300098cf0c1566 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 8 Jun 2017 11:31:11 -0600 Subject: [PATCH 0630/1065] net: vrf: Make add_fib_rules per network namespace flag Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata Signed-off-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/vrf.c | 36 ++++++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-) diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index d38f11d833fe..022c0b5f9844 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -36,12 +36,14 @@ #include #include #include +#include #define DRV_NAME "vrf" #define DRV_VERSION "1.0" #define FIB_RULE_PREF 1000 /* default preference for FIB rules */ -static bool add_fib_rules = true; + +static unsigned int vrf_net_id; struct net_vrf { struct rtable __rcu *rth; @@ -1394,6 +1396,8 @@ static int vrf_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { struct net_vrf *vrf = netdev_priv(dev); + bool *add_fib_rules; + struct net *net; int err; if (!data || !data[IFLA_VRF_TABLE]) @@ -1409,13 +1413,15 @@ static int vrf_newlink(struct net *src_net, struct net_device *dev, if (err) goto out; - if (add_fib_rules) { + net = dev_net(dev); + add_fib_rules = net_generic(net, vrf_net_id); + if (*add_fib_rules) { err = vrf_add_fib_rules(dev); if (err) { unregister_netdevice(dev); goto out; } - add_fib_rules = false; + *add_fib_rules = false; } out: @@ -1498,16 +1504,38 @@ static struct notifier_block vrf_notifier_block __read_mostly = { .notifier_call = vrf_device_event, }; +/* Initialize per network namespace state */ +static int __net_init vrf_netns_init(struct net *net) +{ + bool *add_fib_rules = net_generic(net, vrf_net_id); + + *add_fib_rules = true; + + return 0; +} + +static struct pernet_operations vrf_net_ops __net_initdata = { + .init = vrf_netns_init, + .id = &vrf_net_id, + .size = sizeof(bool), +}; + static int __init vrf_init_module(void) { int rc; register_netdevice_notifier(&vrf_notifier_block); - rc = rtnl_link_register(&vrf_link_ops); + rc = register_pernet_subsys(&vrf_net_ops); if (rc < 0) goto error; + rc = rtnl_link_register(&vrf_link_ops); + if (rc < 0) { + unregister_pernet_subsys(&vrf_net_ops); + goto error; + } + return 0; error: From 47b2c3fff4932e6fc17ce13d51a43c6969714e20 Mon Sep 17 00:00:00 2001 From: Bilal Amarni Date: Thu, 8 Jun 2017 14:47:26 +0100 Subject: [PATCH 0631/1065] security/keys: add CONFIG_KEYS_COMPAT to Kconfig CONFIG_KEYS_COMPAT is defined in arch-specific Kconfigs and is missing for several 64-bit architectures : mips, parisc, tile. At the moment and for those architectures, calling in 32-bit userspace the keyctl syscall would return an ENOSYS error. This patch moves the CONFIG_KEYS_COMPAT option to security/keys/Kconfig, to make sure the compatibility wrapper is registered by default for any 64-bit architecture as long as it is configured with CONFIG_COMPAT. [DH: Modified to remove arm64 compat enablement also as requested by Eric Biggers] Signed-off-by: Bilal Amarni Signed-off-by: David Howells Reviewed-by: Arnd Bergmann cc: Eric Biggers Signed-off-by: James Morris --- arch/arm64/Kconfig | 4 ---- arch/powerpc/Kconfig | 5 ----- arch/s390/Kconfig | 3 --- arch/sparc/Kconfig | 3 --- arch/x86/Kconfig | 4 ---- security/keys/Kconfig | 4 ++++ 6 files changed, 4 insertions(+), 19 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 3dcd7ec69bca..b2024db225a9 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1084,10 +1084,6 @@ config SYSVIPC_COMPAT def_bool y depends on COMPAT && SYSVIPC -config KEYS_COMPAT - def_bool y - depends on COMPAT && KEYS - endmenu menu "Power management options" diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index f7c8f9972f61..83d2e0f43c26 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -1215,11 +1215,6 @@ source "arch/powerpc/Kconfig.debug" source "security/Kconfig" -config KEYS_COMPAT - bool - depends on COMPAT && KEYS - default y - source "crypto/Kconfig" config PPC_LIB_RHEAP diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index e161fafb495b..6967addc6a89 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -363,9 +363,6 @@ config COMPAT config SYSVIPC_COMPAT def_bool y if COMPAT && SYSVIPC -config KEYS_COMPAT - def_bool y if COMPAT && KEYS - config SMP def_bool y prompt "Symmetric multi-processing support" diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index b558c9e29de3..5639c9fe5b55 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -577,9 +577,6 @@ config SYSVIPC_COMPAT depends on COMPAT && SYSVIPC default y -config KEYS_COMPAT - def_bool y if COMPAT && KEYS - endmenu source "net/Kconfig" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4ccfacc7232a..0efb4c9497bc 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2776,10 +2776,6 @@ config COMPAT_FOR_U64_ALIGNMENT config SYSVIPC_COMPAT def_bool y depends on SYSVIPC - -config KEYS_COMPAT - def_bool y - depends on KEYS endif endmenu diff --git a/security/keys/Kconfig b/security/keys/Kconfig index 6fd95f76bfae..00b7431a8aeb 100644 --- a/security/keys/Kconfig +++ b/security/keys/Kconfig @@ -20,6 +20,10 @@ config KEYS If you are unsure as to whether this is required, answer N. +config KEYS_COMPAT + def_bool y + depends on COMPAT && KEYS + config PERSISTENT_KEYRINGS bool "Enable register of persistent per-UID keyrings" depends on KEYS From 381f20fceba8ea540aef5241a9099f4552700d0c Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Thu, 8 Jun 2017 14:47:34 +0100 Subject: [PATCH 0632/1065] security: use READ_ONCE instead of deprecated ACCESS_ONCE With the new standardized functions, we can replace all ACCESS_ONCE() calls across relevant security/keyrings/. ACCESS_ONCE() does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 Update the new calls regardless of if it is a scalar type, this is cleaner than having three alternatives. Signed-off-by: Davidlohr Bueso Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/keyring.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/security/keys/keyring.c b/security/keys/keyring.c index 4d1678e4586f..de81793f9920 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -706,7 +706,7 @@ descend_to_keyring: * Non-keyrings avoid the leftmost branch of the root entirely (root * slots 1-15). */ - ptr = ACCESS_ONCE(keyring->keys.root); + ptr = READ_ONCE(keyring->keys.root); if (!ptr) goto not_this_keyring; @@ -720,7 +720,7 @@ descend_to_keyring: if ((shortcut->index_key[0] & ASSOC_ARRAY_FAN_MASK) != 0) goto not_this_keyring; - ptr = ACCESS_ONCE(shortcut->next_node); + ptr = READ_ONCE(shortcut->next_node); node = assoc_array_ptr_to_node(ptr); goto begin_node; } @@ -740,7 +740,7 @@ descend_to_node: if (assoc_array_ptr_is_shortcut(ptr)) { shortcut = assoc_array_ptr_to_shortcut(ptr); smp_read_barrier_depends(); - ptr = ACCESS_ONCE(shortcut->next_node); + ptr = READ_ONCE(shortcut->next_node); BUG_ON(!assoc_array_ptr_is_node(ptr)); } node = assoc_array_ptr_to_node(ptr); @@ -752,7 +752,7 @@ begin_node: ascend_to_node: /* Go through the slots in a node */ for (; slot < ASSOC_ARRAY_FAN_OUT; slot++) { - ptr = ACCESS_ONCE(node->slots[slot]); + ptr = READ_ONCE(node->slots[slot]); if (assoc_array_ptr_is_meta(ptr) && node->back_pointer) goto descend_to_node; @@ -790,13 +790,13 @@ ascend_to_node: /* We've dealt with all the slots in the current node, so now we need * to ascend to the parent and continue processing there. */ - ptr = ACCESS_ONCE(node->back_pointer); + ptr = READ_ONCE(node->back_pointer); slot = node->parent_slot; if (ptr && assoc_array_ptr_is_shortcut(ptr)) { shortcut = assoc_array_ptr_to_shortcut(ptr); smp_read_barrier_depends(); - ptr = ACCESS_ONCE(shortcut->back_pointer); + ptr = READ_ONCE(shortcut->back_pointer); slot = shortcut->parent_slot; } if (!ptr) From 4e880168e9ffb1cdbdb72b3b48ab0324b30c2d62 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 8 Jun 2017 14:47:49 +0100 Subject: [PATCH 0633/1065] X.509: Fix error code in x509_cert_parse() We forgot to set the error code on this path so it could result in returning NULL which leads to a NULL dereference. Fixes: db6c43bd2132 ("crypto: KEYS: convert public key and digsig asym to the akcipher api") Signed-off-by: Dan Carpenter Signed-off-by: David Howells Signed-off-by: James Morris --- crypto/asymmetric_keys/x509_cert_parser.c | 1 + 1 file changed, 1 insertion(+) diff --git a/crypto/asymmetric_keys/x509_cert_parser.c b/crypto/asymmetric_keys/x509_cert_parser.c index c80765b211cf..dd03fead1ca3 100644 --- a/crypto/asymmetric_keys/x509_cert_parser.c +++ b/crypto/asymmetric_keys/x509_cert_parser.c @@ -102,6 +102,7 @@ struct x509_certificate *x509_cert_parse(const void *data, size_t datalen) } } + ret = -ENOMEM; cert->pub->key = kmemdup(ctx->key, ctx->key_size, GFP_KERNEL); if (!cert->pub->key) goto error_decode; From 41f1c53e0d7d6e79087d5f5e18c467747126a3fc Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Thu, 8 Jun 2017 14:47:56 +0100 Subject: [PATCH 0634/1065] KEYS: Delete an error message for a failed memory allocation in get_derived_key() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/encrypted-keys/encrypted.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c index 0010955d7876..2ab48eab29a1 100644 --- a/security/keys/encrypted-keys/encrypted.c +++ b/security/keys/encrypted-keys/encrypted.c @@ -385,10 +385,9 @@ static int get_derived_key(u8 *derived_key, enum derived_key_type key_type, derived_buf_len = HASH_SIZE; derived_buf = kzalloc(derived_buf_len, GFP_KERNEL); - if (!derived_buf) { - pr_err("encrypted_key: out of memory\n"); + if (!derived_buf) return -ENOMEM; - } + if (key_type) strcpy(derived_buf, "AUTH_KEY"); else From d636bd9f12a66ea3775c9fabbf3f8e118253467a Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:48:03 +0100 Subject: [PATCH 0635/1065] KEYS: put keyring if install_session_keyring_to_cred() fails In join_session_keyring(), if install_session_keyring_to_cred() were to fail, we would leak the keyring reference, just like in the bug fixed by commit 23567fd052a9 ("KEYS: Fix keyring ref leak in join_session_keyring()"). Fortunately this cannot happen currently, but we really should be more careful. Do this by adding and using a new error label at which the keyring reference is dropped. Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/process_keys.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c index 2217dfec7996..86bced9fdbdf 100644 --- a/security/keys/process_keys.c +++ b/security/keys/process_keys.c @@ -809,15 +809,14 @@ long join_session_keyring(const char *name) ret = PTR_ERR(keyring); goto error2; } else if (keyring == new->session_keyring) { - key_put(keyring); ret = 0; - goto error2; + goto error3; } /* we've got a keyring - now to install it */ ret = install_session_keyring_to_cred(new, keyring); if (ret < 0) - goto error2; + goto error3; commit_creds(new); mutex_unlock(&key_session_mutex); @@ -827,6 +826,8 @@ long join_session_keyring(const char *name) okay: return ret; +error3: + key_put(keyring); error2: mutex_unlock(&key_session_mutex); error: From e9ff56ac352446f55141aaef1553cee662b2e310 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:48:10 +0100 Subject: [PATCH 0636/1065] KEYS: encrypted: avoid encrypting/decrypting stack buffers Since v4.9, the crypto API cannot (normally) be used to encrypt/decrypt stack buffers because the stack may be virtually mapped. Fix this for the padding buffers in encrypted-keys by using ZERO_PAGE for the encryption padding and by allocating a temporary heap buffer for the decryption padding. Tested with CONFIG_DEBUG_SG=y: keyctl new_session keyctl add user master "abcdefghijklmnop" @s keyid=$(keyctl add encrypted desc "new user:master 25" @s) datablob="$(keyctl pipe $keyid)" keyctl unlink $keyid keyid=$(keyctl add encrypted desc "load $datablob" @s) datablob2="$(keyctl pipe $keyid)" [ "$datablob" = "$datablob2" ] && echo "Success!" Cc: Andy Lutomirski Cc: Herbert Xu Cc: Mimi Zohar Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/encrypted-keys/encrypted.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c index 2ab48eab29a1..d14f1a47a130 100644 --- a/security/keys/encrypted-keys/encrypted.c +++ b/security/keys/encrypted-keys/encrypted.c @@ -479,12 +479,9 @@ static int derived_key_encrypt(struct encrypted_key_payload *epayload, struct skcipher_request *req; unsigned int encrypted_datalen; u8 iv[AES_BLOCK_SIZE]; - unsigned int padlen; - char pad[16]; int ret; encrypted_datalen = roundup(epayload->decrypted_datalen, blksize); - padlen = encrypted_datalen - epayload->decrypted_datalen; req = init_skcipher_req(derived_key, derived_keylen); ret = PTR_ERR(req); @@ -492,11 +489,10 @@ static int derived_key_encrypt(struct encrypted_key_payload *epayload, goto out; dump_decrypted_data(epayload); - memset(pad, 0, sizeof pad); sg_init_table(sg_in, 2); sg_set_buf(&sg_in[0], epayload->decrypted_data, epayload->decrypted_datalen); - sg_set_buf(&sg_in[1], pad, padlen); + sg_set_page(&sg_in[1], ZERO_PAGE(0), AES_BLOCK_SIZE, 0); sg_init_table(sg_out, 1); sg_set_buf(sg_out, epayload->encrypted_data, encrypted_datalen); @@ -583,9 +579,14 @@ static int derived_key_decrypt(struct encrypted_key_payload *epayload, struct skcipher_request *req; unsigned int encrypted_datalen; u8 iv[AES_BLOCK_SIZE]; - char pad[16]; + u8 *pad; int ret; + /* Throwaway buffer to hold the unused zero padding at the end */ + pad = kmalloc(AES_BLOCK_SIZE, GFP_KERNEL); + if (!pad) + return -ENOMEM; + encrypted_datalen = roundup(epayload->decrypted_datalen, blksize); req = init_skcipher_req(derived_key, derived_keylen); ret = PTR_ERR(req); @@ -593,13 +594,12 @@ static int derived_key_decrypt(struct encrypted_key_payload *epayload, goto out; dump_encrypted_data(epayload, encrypted_datalen); - memset(pad, 0, sizeof pad); sg_init_table(sg_in, 1); sg_init_table(sg_out, 2); sg_set_buf(sg_in, epayload->encrypted_data, encrypted_datalen); sg_set_buf(&sg_out[0], epayload->decrypted_data, epayload->decrypted_datalen); - sg_set_buf(&sg_out[1], pad, sizeof pad); + sg_set_buf(&sg_out[1], pad, AES_BLOCK_SIZE); memcpy(iv, epayload->iv, sizeof(iv)); skcipher_request_set_crypt(req, sg_in, sg_out, encrypted_datalen, iv); @@ -611,6 +611,7 @@ static int derived_key_decrypt(struct encrypted_key_payload *epayload, goto out; dump_decrypted_data(epayload); out: + kfree(pad); return ret; } From 794b4bc292f5d31739d89c0202c54e7dc9bc3add Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:48:18 +0100 Subject: [PATCH 0637/1065] KEYS: encrypted: fix buffer overread in valid_master_desc() With the 'encrypted' key type it was possible for userspace to provide a data blob ending with a master key description shorter than expected, e.g. 'keyctl add encrypted desc "new x" @s'. When validating such a master key description, validate_master_desc() could read beyond the end of the buffer. Fix this by using strncmp() instead of memcmp(). [Also clean up the code to deduplicate some logic.] Cc: Mimi Zohar Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/encrypted-keys/encrypted.c | 31 ++++++++++++------------ 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c index d14f1a47a130..0f7b95de3b5f 100644 --- a/security/keys/encrypted-keys/encrypted.c +++ b/security/keys/encrypted-keys/encrypted.c @@ -141,23 +141,22 @@ static int valid_ecryptfs_desc(const char *ecryptfs_desc) */ static int valid_master_desc(const char *new_desc, const char *orig_desc) { - if (!memcmp(new_desc, KEY_TRUSTED_PREFIX, KEY_TRUSTED_PREFIX_LEN)) { - if (strlen(new_desc) == KEY_TRUSTED_PREFIX_LEN) - goto out; - if (orig_desc) - if (memcmp(new_desc, orig_desc, KEY_TRUSTED_PREFIX_LEN)) - goto out; - } else if (!memcmp(new_desc, KEY_USER_PREFIX, KEY_USER_PREFIX_LEN)) { - if (strlen(new_desc) == KEY_USER_PREFIX_LEN) - goto out; - if (orig_desc) - if (memcmp(new_desc, orig_desc, KEY_USER_PREFIX_LEN)) - goto out; - } else - goto out; + int prefix_len; + + if (!strncmp(new_desc, KEY_TRUSTED_PREFIX, KEY_TRUSTED_PREFIX_LEN)) + prefix_len = KEY_TRUSTED_PREFIX_LEN; + else if (!strncmp(new_desc, KEY_USER_PREFIX, KEY_USER_PREFIX_LEN)) + prefix_len = KEY_USER_PREFIX_LEN; + else + return -EINVAL; + + if (!new_desc[prefix_len]) + return -EINVAL; + + if (orig_desc && strncmp(new_desc, orig_desc, prefix_len)) + return -EINVAL; + return 0; -out: - return -EINVAL; } /* From 64d107d3acca1565c39c044c459fd18f70943534 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:48:25 +0100 Subject: [PATCH 0638/1065] KEYS: encrypted: fix race causing incorrect HMAC calculations The encrypted-keys module was using a single global HMAC transform, which could be rekeyed by multiple threads concurrently operating on different keys, causing incorrect HMAC values to be calculated. Fix this by allocating a new HMAC transform whenever we need to calculate a HMAC. Also simplify things a bit by allocating the shash_desc's using SHASH_DESC_ON_STACK() for both the HMAC and unkeyed hashes. The following script reproduces the bug: keyctl new_session keyctl add user master "abcdefghijklmnop" @s for i in $(seq 2); do ( set -e for j in $(seq 1000); do keyid=$(keyctl add encrypted desc$i "new user:master 25" @s) datablob="$(keyctl pipe $keyid)" keyctl unlink $keyid > /dev/null keyid=$(keyctl add encrypted desc$i "load $datablob" @s) keyctl unlink $keyid > /dev/null done ) & done Output with bug: [ 439.691094] encrypted_key: bad hmac (-22) add_key: Invalid argument add_key: Invalid argument Cc: Mimi Zohar Cc: Herbert Xu Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/encrypted-keys/encrypted.c | 117 +++++++---------------- 1 file changed, 33 insertions(+), 84 deletions(-) diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c index 0f7b95de3b5f..702c80662069 100644 --- a/security/keys/encrypted-keys/encrypted.c +++ b/security/keys/encrypted-keys/encrypted.c @@ -54,13 +54,7 @@ static int blksize; #define MAX_DATA_SIZE 4096 #define MIN_DATA_SIZE 20 -struct sdesc { - struct shash_desc shash; - char ctx[]; -}; - -static struct crypto_shash *hashalg; -static struct crypto_shash *hmacalg; +static struct crypto_shash *hash_tfm; enum { Opt_err = -1, Opt_new, Opt_load, Opt_update @@ -320,53 +314,38 @@ error: return ukey; } -static struct sdesc *alloc_sdesc(struct crypto_shash *alg) +static int calc_hash(struct crypto_shash *tfm, u8 *digest, + const u8 *buf, unsigned int buflen) { - struct sdesc *sdesc; - int size; + SHASH_DESC_ON_STACK(desc, tfm); + int err; - size = sizeof(struct shash_desc) + crypto_shash_descsize(alg); - sdesc = kmalloc(size, GFP_KERNEL); - if (!sdesc) - return ERR_PTR(-ENOMEM); - sdesc->shash.tfm = alg; - sdesc->shash.flags = 0x0; - return sdesc; + desc->tfm = tfm; + desc->flags = 0; + + err = crypto_shash_digest(desc, buf, buflen, digest); + shash_desc_zero(desc); + return err; } static int calc_hmac(u8 *digest, const u8 *key, unsigned int keylen, const u8 *buf, unsigned int buflen) { - struct sdesc *sdesc; - int ret; + struct crypto_shash *tfm; + int err; - sdesc = alloc_sdesc(hmacalg); - if (IS_ERR(sdesc)) { - pr_info("encrypted_key: can't alloc %s\n", hmac_alg); - return PTR_ERR(sdesc); + tfm = crypto_alloc_shash(hmac_alg, 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(tfm)) { + pr_err("encrypted_key: can't alloc %s transform: %ld\n", + hmac_alg, PTR_ERR(tfm)); + return PTR_ERR(tfm); } - ret = crypto_shash_setkey(hmacalg, key, keylen); - if (!ret) - ret = crypto_shash_digest(&sdesc->shash, buf, buflen, digest); - kfree(sdesc); - return ret; -} - -static int calc_hash(u8 *digest, const u8 *buf, unsigned int buflen) -{ - struct sdesc *sdesc; - int ret; - - sdesc = alloc_sdesc(hashalg); - if (IS_ERR(sdesc)) { - pr_info("encrypted_key: can't alloc %s\n", hash_alg); - return PTR_ERR(sdesc); - } - - ret = crypto_shash_digest(&sdesc->shash, buf, buflen, digest); - kfree(sdesc); - return ret; + err = crypto_shash_setkey(tfm, key, keylen); + if (!err) + err = calc_hash(tfm, digest, buf, buflen); + crypto_free_shash(tfm); + return err; } enum derived_key_type { ENC_KEY, AUTH_KEY }; @@ -394,7 +373,7 @@ static int get_derived_key(u8 *derived_key, enum derived_key_type key_type, memcpy(derived_buf + strlen(derived_buf) + 1, master_key, master_keylen); - ret = calc_hash(derived_key, derived_buf, derived_buf_len); + ret = calc_hash(hash_tfm, derived_key, derived_buf, derived_buf_len); kfree(derived_buf); return ret; } @@ -998,47 +977,17 @@ struct key_type key_type_encrypted = { }; EXPORT_SYMBOL_GPL(key_type_encrypted); -static void encrypted_shash_release(void) -{ - if (hashalg) - crypto_free_shash(hashalg); - if (hmacalg) - crypto_free_shash(hmacalg); -} - -static int __init encrypted_shash_alloc(void) -{ - int ret; - - hmacalg = crypto_alloc_shash(hmac_alg, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(hmacalg)) { - pr_info("encrypted_key: could not allocate crypto %s\n", - hmac_alg); - return PTR_ERR(hmacalg); - } - - hashalg = crypto_alloc_shash(hash_alg, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(hashalg)) { - pr_info("encrypted_key: could not allocate crypto %s\n", - hash_alg); - ret = PTR_ERR(hashalg); - goto hashalg_fail; - } - - return 0; - -hashalg_fail: - crypto_free_shash(hmacalg); - return ret; -} - static int __init init_encrypted(void) { int ret; - ret = encrypted_shash_alloc(); - if (ret < 0) - return ret; + hash_tfm = crypto_alloc_shash(hash_alg, 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(hash_tfm)) { + pr_err("encrypted_key: can't allocate %s transform: %ld\n", + hash_alg, PTR_ERR(hash_tfm)); + return PTR_ERR(hash_tfm); + } + ret = aes_get_sizes(); if (ret < 0) goto out; @@ -1047,14 +996,14 @@ static int __init init_encrypted(void) goto out; return 0; out: - encrypted_shash_release(); + crypto_free_shash(hash_tfm); return ret; } static void __exit cleanup_encrypted(void) { - encrypted_shash_release(); + crypto_free_shash(hash_tfm); unregister_key_type(&key_type_encrypted); } From 0f534e4a13496b02ae284f50fcb0263f6ea37007 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:48:32 +0100 Subject: [PATCH 0639/1065] KEYS: encrypted: use constant-time HMAC comparison MACs should, in general, be compared using crypto_memneq() to prevent timing attacks. Cc: Mimi Zohar Cc: Herbert Xu Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/encrypted-keys/encrypted.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c index 702c80662069..5c98c2fe03f0 100644 --- a/security/keys/encrypted-keys/encrypted.c +++ b/security/keys/encrypted-keys/encrypted.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -534,8 +535,8 @@ static int datablob_hmac_verify(struct encrypted_key_payload *epayload, ret = calc_hmac(digest, derived_key, sizeof derived_key, p, len); if (ret < 0) goto out; - ret = memcmp(digest, epayload->format + epayload->datablob_len, - sizeof digest); + ret = crypto_memneq(digest, epayload->format + epayload->datablob_len, + sizeof(digest)); if (ret) { ret = -EINVAL; dump_hmac("datablob", From 5649645d725c73df4302428ee4e02c869248b4c5 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:48:40 +0100 Subject: [PATCH 0640/1065] KEYS: fix dereferencing NULL payload with nonzero length sys_add_key() and the KEYCTL_UPDATE operation of sys_keyctl() allowed a NULL payload with nonzero length to be passed to the key type's ->preparse(), ->instantiate(), and/or ->update() methods. Various key types including asymmetric, cifs.idmap, cifs.spnego, and pkcs7_test did not handle this case, allowing an unprivileged user to trivially cause a NULL pointer dereference (kernel oops) if one of these key types was present. Fix it by doing the copy_from_user() when 'plen' is nonzero rather than when '_payload' is non-NULL, causing the syscall to fail with EFAULT as expected when an invalid buffer is specified. Cc: stable@vger.kernel.org # 2.6.10+ Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/keyctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index 447a7d5cee0f..94c2790f8283 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -99,7 +99,7 @@ SYSCALL_DEFINE5(add_key, const char __user *, _type, /* pull the payload in if one was supplied */ payload = NULL; - if (_payload) { + if (plen) { ret = -ENOMEM; payload = kvmalloc(plen, GFP_KERNEL); if (!payload) @@ -324,7 +324,7 @@ long keyctl_update_key(key_serial_t id, /* pull the payload in if one was supplied */ payload = NULL; - if (_payload) { + if (plen) { ret = -ENOMEM; payload = kmalloc(plen, GFP_KERNEL); if (!payload) From 63a0b0509e700717a59f049ec6e4e04e903c7fe2 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:48:47 +0100 Subject: [PATCH 0641/1065] KEYS: fix freeing uninitialized memory in key_update() key_update() freed the key_preparsed_payload even if it was not initialized first. This would cause a crash if userspace called keyctl_update() on a key with type like "asymmetric" that has a ->preparse() method but not an ->update() method. Possibly it could even be triggered for other key types by racing with keyctl_setperm() to make the KEY_NEED_WRITE check fail (the permission was already checked, so normally it wouldn't fail there). Reproducer with key type "asymmetric", given a valid cert.der: keyctl new_session keyid=$(keyctl padd asymmetric desc @s < cert.der) keyctl setperm $keyid 0x3f000000 keyctl update $keyid data [ 150.686666] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 [ 150.687601] IP: asymmetric_key_free_kids+0x12/0x30 [ 150.688139] PGD 38a3d067 [ 150.688141] PUD 3b3de067 [ 150.688447] PMD 0 [ 150.688745] [ 150.689160] Oops: 0000 [#1] SMP [ 150.689455] Modules linked in: [ 150.689769] CPU: 1 PID: 2478 Comm: keyctl Not tainted 4.11.0-rc4-xfstests-00187-ga9f6b6b8cd2f #742 [ 150.690916] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 [ 150.692199] task: ffff88003b30c480 task.stack: ffffc90000350000 [ 150.692952] RIP: 0010:asymmetric_key_free_kids+0x12/0x30 [ 150.693556] RSP: 0018:ffffc90000353e58 EFLAGS: 00010202 [ 150.694142] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000004 [ 150.694845] RDX: ffffffff81ee3920 RSI: ffff88003d4b0700 RDI: 0000000000000001 [ 150.697569] RBP: ffffc90000353e60 R08: ffff88003d5d2140 R09: 0000000000000000 [ 150.702483] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 150.707393] R13: 0000000000000004 R14: ffff880038a4d2d8 R15: 000000000040411f [ 150.709720] FS: 00007fcbcee35700(0000) GS:ffff88003fd00000(0000) knlGS:0000000000000000 [ 150.711504] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.712733] CR2: 0000000000000001 CR3: 0000000039eab000 CR4: 00000000003406e0 [ 150.714487] Call Trace: [ 150.714975] asymmetric_key_free_preparse+0x2f/0x40 [ 150.715907] key_update+0xf7/0x140 [ 150.716560] ? key_default_cmp+0x20/0x20 [ 150.717319] keyctl_update_key+0xb0/0xe0 [ 150.718066] SyS_keyctl+0x109/0x130 [ 150.718663] entry_SYSCALL_64_fastpath+0x1f/0xc2 [ 150.719440] RIP: 0033:0x7fcbce75ff19 [ 150.719926] RSP: 002b:00007ffd5d167088 EFLAGS: 00000206 ORIG_RAX: 00000000000000fa [ 150.720918] RAX: ffffffffffffffda RBX: 0000000000404d80 RCX: 00007fcbce75ff19 [ 150.721874] RDX: 00007ffd5d16785e RSI: 000000002866cd36 RDI: 0000000000000002 [ 150.722827] RBP: 0000000000000006 R08: 000000002866cd36 R09: 00007ffd5d16785e [ 150.723781] R10: 0000000000000004 R11: 0000000000000206 R12: 0000000000404d80 [ 150.724650] R13: 00007ffd5d16784d R14: 00007ffd5d167238 R15: 000000000040411f [ 150.725447] Code: 83 c4 08 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 85 ff 74 23 55 48 89 e5 53 48 89 fb <48> 8b 3f e8 06 21 c5 ff 48 8b 7b 08 e8 fd 20 c5 ff 48 89 df e8 [ 150.727489] RIP: asymmetric_key_free_kids+0x12/0x30 RSP: ffffc90000353e58 [ 150.728117] CR2: 0000000000000001 [ 150.728430] ---[ end trace f7f8fe1da2d5ae8d ]--- Fixes: 4d8c0250b841 ("KEYS: Call ->free_preparse() even after ->preparse() returns an error") Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/key.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/security/keys/key.c b/security/keys/key.c index 455c04d80bbb..cbae368c0e57 100644 --- a/security/keys/key.c +++ b/security/keys/key.c @@ -966,12 +966,11 @@ int key_update(key_ref_t key_ref, const void *payload, size_t plen) /* the key must be writable */ ret = key_permission(key_ref, KEY_NEED_WRITE); if (ret < 0) - goto error; + return ret; /* attempt to update it if supported */ - ret = -EOPNOTSUPP; if (!key->type->update) - goto error; + return -EOPNOTSUPP; memset(&prep, 0, sizeof(prep)); prep.data = payload; From 57070c850a03ee0cea654fc22cb8032fc3139d39 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:48:57 +0100 Subject: [PATCH 0642/1065] KEYS: sanitize add_key() and keyctl() key payloads Before returning from add_key() or one of the keyctl() commands that takes in a key payload, zero the temporary buffer that was allocated to hold the key payload copied from userspace. This may contain sensitive key material that should not be kept around in the slab caches. Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/keyctl.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index 94c2790f8283..ab0b337c84b4 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -132,7 +132,10 @@ SYSCALL_DEFINE5(add_key, const char __user *, _type, key_ref_put(keyring_ref); error3: - kvfree(payload); + if (payload) { + memzero_explicit(payload, plen); + kvfree(payload); + } error2: kfree(description); error: @@ -347,7 +350,7 @@ long keyctl_update_key(key_serial_t id, key_ref_put(key_ref); error2: - kfree(payload); + kzfree(payload); error: return ret; } @@ -1093,7 +1096,10 @@ long keyctl_instantiate_key_common(key_serial_t id, keyctl_change_reqkey_auth(NULL); error2: - kvfree(payload); + if (payload) { + memzero_explicit(payload, plen); + kvfree(payload); + } error: return ret; } From 6966c74932b328b3d6df92b11b083bfbcd067986 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:04 +0100 Subject: [PATCH 0643/1065] KEYS: user_defined: sanitize key payloads Zero the payloads of user and logon keys before freeing them. This prevents sensitive key material from being kept around in the slab caches after a key is released. Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/user_defined.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c index 26605134f17a..3d8c68eba516 100644 --- a/security/keys/user_defined.c +++ b/security/keys/user_defined.c @@ -86,10 +86,18 @@ EXPORT_SYMBOL_GPL(user_preparse); */ void user_free_preparse(struct key_preparsed_payload *prep) { - kfree(prep->payload.data[0]); + kzfree(prep->payload.data[0]); } EXPORT_SYMBOL_GPL(user_free_preparse); +static void user_free_payload_rcu(struct rcu_head *head) +{ + struct user_key_payload *payload; + + payload = container_of(head, struct user_key_payload, rcu); + kzfree(payload); +} + /* * update a user defined key * - the key's semaphore is write-locked @@ -112,7 +120,7 @@ int user_update(struct key *key, struct key_preparsed_payload *prep) prep->payload.data[0] = NULL; if (zap) - kfree_rcu(zap, rcu); + call_rcu(&zap->rcu, user_free_payload_rcu); return ret; } EXPORT_SYMBOL_GPL(user_update); @@ -130,7 +138,7 @@ void user_revoke(struct key *key) if (upayload) { rcu_assign_keypointer(key, NULL); - kfree_rcu(upayload, rcu); + call_rcu(&upayload->rcu, user_free_payload_rcu); } } @@ -143,7 +151,7 @@ void user_destroy(struct key *key) { struct user_key_payload *upayload = key->payload.data[0]; - kfree(upayload); + kzfree(upayload); } EXPORT_SYMBOL_GPL(user_destroy); From a9dd74b252e04b7e41ffe78d418b896b33b70a13 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:11 +0100 Subject: [PATCH 0644/1065] KEYS: encrypted: sanitize all key material For keys of type "encrypted", consistently zero sensitive key material before freeing it. This was already being done for the decrypted payloads of encrypted keys, but not for the master key and the keys derived from the master key. Out of an abundance of caution and because it is trivial to do so, also zero buffers containing the key payload in encrypted form, although depending on how the encrypted-keys feature is used such information does not necessarily need to be kept secret. Cc: Mimi Zohar Cc: David Safford Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/encrypted-keys/encrypted.c | 31 ++++++++++-------------- 1 file changed, 13 insertions(+), 18 deletions(-) diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c index 5c98c2fe03f0..bb6324d1ccec 100644 --- a/security/keys/encrypted-keys/encrypted.c +++ b/security/keys/encrypted-keys/encrypted.c @@ -375,7 +375,7 @@ static int get_derived_key(u8 *derived_key, enum derived_key_type key_type, memcpy(derived_buf + strlen(derived_buf) + 1, master_key, master_keylen); ret = calc_hash(hash_tfm, derived_key, derived_buf, derived_buf_len); - kfree(derived_buf); + kzfree(derived_buf); return ret; } @@ -507,6 +507,7 @@ static int datablob_hmac_append(struct encrypted_key_payload *epayload, if (!ret) dump_hmac(NULL, digest, HASH_SIZE); out: + memzero_explicit(derived_key, sizeof(derived_key)); return ret; } @@ -545,6 +546,7 @@ static int datablob_hmac_verify(struct encrypted_key_payload *epayload, dump_hmac("calc", digest, HASH_SIZE); } out: + memzero_explicit(derived_key, sizeof(derived_key)); return ret; } @@ -701,6 +703,7 @@ static int encrypted_key_decrypt(struct encrypted_key_payload *epayload, out: up_read(&mkey->sem); key_put(mkey); + memzero_explicit(derived_key, sizeof(derived_key)); return ret; } @@ -807,13 +810,13 @@ static int encrypted_instantiate(struct key *key, ret = encrypted_init(epayload, key->description, format, master_desc, decrypted_datalen, hex_encoded_iv); if (ret < 0) { - kfree(epayload); + kzfree(epayload); goto out; } rcu_assign_keypointer(key, epayload); out: - kfree(datablob); + kzfree(datablob); return ret; } @@ -822,8 +825,7 @@ static void encrypted_rcu_free(struct rcu_head *rcu) struct encrypted_key_payload *epayload; epayload = container_of(rcu, struct encrypted_key_payload, rcu); - memset(epayload->decrypted_data, 0, epayload->decrypted_datalen); - kfree(epayload); + kzfree(epayload); } /* @@ -881,7 +883,7 @@ static int encrypted_update(struct key *key, struct key_preparsed_payload *prep) rcu_assign_keypointer(key, new_epayload); call_rcu(&epayload->rcu, encrypted_rcu_free); out: - kfree(buf); + kzfree(buf); return ret; } @@ -939,33 +941,26 @@ static long encrypted_read(const struct key *key, char __user *buffer, up_read(&mkey->sem); key_put(mkey); + memzero_explicit(derived_key, sizeof(derived_key)); if (copy_to_user(buffer, ascii_buf, asciiblob_len) != 0) ret = -EFAULT; - kfree(ascii_buf); + kzfree(ascii_buf); return asciiblob_len; out: up_read(&mkey->sem); key_put(mkey); + memzero_explicit(derived_key, sizeof(derived_key)); return ret; } /* - * encrypted_destroy - before freeing the key, clear the decrypted data - * - * Before freeing the key, clear the memory containing the decrypted - * key data. + * encrypted_destroy - clear and free the key's payload */ static void encrypted_destroy(struct key *key) { - struct encrypted_key_payload *epayload = key->payload.data[0]; - - if (!epayload) - return; - - memzero_explicit(epayload->decrypted_data, epayload->decrypted_datalen); - kfree(key->payload.data[0]); + kzfree(key->payload.data[0]); } struct key_type key_type_encrypted = { From ee618b4619b72527aaed765f0f0b74072b281159 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:18 +0100 Subject: [PATCH 0645/1065] KEYS: trusted: sanitize all key material As the previous patch did for encrypted-keys, zero sensitive any potentially sensitive data related to the "trusted" key type before it is freed. Notably, we were not zeroing the tpm_buf structures in which the actual key is stored for TPM seal and unseal, nor were we zeroing the trusted_key_payload in certain error paths. Cc: Mimi Zohar Cc: David Safford Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/trusted.c | 50 ++++++++++++++++++----------------------- 1 file changed, 22 insertions(+), 28 deletions(-) diff --git a/security/keys/trusted.c b/security/keys/trusted.c index 2ae31c5a87de..435e86e13879 100644 --- a/security/keys/trusted.c +++ b/security/keys/trusted.c @@ -70,7 +70,7 @@ static int TSS_sha1(const unsigned char *data, unsigned int datalen, } ret = crypto_shash_digest(&sdesc->shash, data, datalen, digest); - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -114,7 +114,7 @@ static int TSS_rawhmac(unsigned char *digest, const unsigned char *key, if (!ret) ret = crypto_shash_final(&sdesc->shash, digest); out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -165,7 +165,7 @@ static int TSS_authhmac(unsigned char *digest, const unsigned char *key, paramdigest, TPM_NONCE_SIZE, h1, TPM_NONCE_SIZE, h2, 1, &c, 0, 0); out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -246,7 +246,7 @@ static int TSS_checkhmac1(unsigned char *buffer, if (memcmp(testhmac, authdata, SHA1_DIGEST_SIZE)) ret = -EINVAL; out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -347,7 +347,7 @@ static int TSS_checkhmac2(unsigned char *buffer, if (memcmp(testhmac2, authdata2, SHA1_DIGEST_SIZE)) ret = -EINVAL; out: - kfree(sdesc); + kzfree(sdesc); return ret; } @@ -564,7 +564,7 @@ static int tpm_seal(struct tpm_buf *tb, uint16_t keytype, *bloblen = storedsize; } out: - kfree(td); + kzfree(td); return ret; } @@ -678,7 +678,7 @@ static int key_seal(struct trusted_key_payload *p, if (ret < 0) pr_info("trusted_key: srkseal failed (%d)\n", ret); - kfree(tb); + kzfree(tb); return ret; } @@ -703,7 +703,7 @@ static int key_unseal(struct trusted_key_payload *p, /* pull migratable flag out of sealed key */ p->migratable = p->key[--p->key_len]; - kfree(tb); + kzfree(tb); return ret; } @@ -1037,12 +1037,12 @@ static int trusted_instantiate(struct key *key, if (!ret && options->pcrlock) ret = pcrlock(options->pcrlock); out: - kfree(datablob); - kfree(options); + kzfree(datablob); + kzfree(options); if (!ret) rcu_assign_keypointer(key, payload); else - kfree(payload); + kzfree(payload); return ret; } @@ -1051,8 +1051,7 @@ static void trusted_rcu_free(struct rcu_head *rcu) struct trusted_key_payload *p; p = container_of(rcu, struct trusted_key_payload, rcu); - memset(p->key, 0, p->key_len); - kfree(p); + kzfree(p); } /* @@ -1094,13 +1093,13 @@ static int trusted_update(struct key *key, struct key_preparsed_payload *prep) ret = datablob_parse(datablob, new_p, new_o); if (ret != Opt_update) { ret = -EINVAL; - kfree(new_p); + kzfree(new_p); goto out; } if (!new_o->keyhandle) { ret = -EINVAL; - kfree(new_p); + kzfree(new_p); goto out; } @@ -1114,22 +1113,22 @@ static int trusted_update(struct key *key, struct key_preparsed_payload *prep) ret = key_seal(new_p, new_o); if (ret < 0) { pr_info("trusted_key: key_seal failed (%d)\n", ret); - kfree(new_p); + kzfree(new_p); goto out; } if (new_o->pcrlock) { ret = pcrlock(new_o->pcrlock); if (ret < 0) { pr_info("trusted_key: pcrlock failed (%d)\n", ret); - kfree(new_p); + kzfree(new_p); goto out; } } rcu_assign_keypointer(key, new_p); call_rcu(&p->rcu, trusted_rcu_free); out: - kfree(datablob); - kfree(new_o); + kzfree(datablob); + kzfree(new_o); return ret; } @@ -1158,24 +1157,19 @@ static long trusted_read(const struct key *key, char __user *buffer, for (i = 0; i < p->blob_len; i++) bufp = hex_byte_pack(bufp, p->blob[i]); if ((copy_to_user(buffer, ascii_buf, 2 * p->blob_len)) != 0) { - kfree(ascii_buf); + kzfree(ascii_buf); return -EFAULT; } - kfree(ascii_buf); + kzfree(ascii_buf); return 2 * p->blob_len; } /* - * trusted_destroy - before freeing the key, clear the decrypted data + * trusted_destroy - clear and free the key's payload */ static void trusted_destroy(struct key *key) { - struct trusted_key_payload *p = key->payload.data[0]; - - if (!p) - return; - memset(p->key, 0, p->key_len); - kfree(key->payload.data[0]); + kzfree(key->payload.data[0]); } struct key_type key_type_trusted = { From 0620fddb56dfaf0e1034eeb69d79c73b361debbf Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:26 +0100 Subject: [PATCH 0646/1065] KEYS: sanitize key structs before freeing While a 'struct key' itself normally does not contain sensitive information, Documentation/security/keys.txt actually encourages this: "Having a payload is not required; and the payload can, in fact, just be a value stored in the struct key itself." In case someone has taken this advice, or will take this advice in the future, zero the key structure before freeing it. We might as well, and as a bonus this could make it a bit more difficult for an adversary to determine which keys have recently been in use. This is safe because the key_jar cache does not use a constructor. Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris --- include/linux/key.h | 1 - security/keys/gc.c | 4 +--- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/include/linux/key.h b/include/linux/key.h index 0c9b93b0d1f7..78e25aabedaf 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -173,7 +173,6 @@ struct key { #ifdef KEY_DEBUGGING unsigned magic; #define KEY_DEBUG_MAGIC 0x18273645u -#define KEY_DEBUG_MAGIC_X 0xf8e9dacbu #endif unsigned long flags; /* status flags (change with bitops) */ diff --git a/security/keys/gc.c b/security/keys/gc.c index 595becc6d0d2..87cb260e4890 100644 --- a/security/keys/gc.c +++ b/security/keys/gc.c @@ -158,9 +158,7 @@ static noinline void key_gc_unused_keys(struct list_head *keys) kfree(key->description); -#ifdef KEY_DEBUGGING - key->magic = KEY_DEBUG_MAGIC_X; -#endif + memzero_explicit(key, sizeof(*key)); kmem_cache_free(key_jar, key); } } From bbe240454d86be95151e0ecfd6ac55fe5ef5a6f5 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:34 +0100 Subject: [PATCH 0647/1065] KEYS: DH: forbid using digest_null as the KDF hash Requesting "digest_null" in the keyctl_kdf_params caused an infinite loop in kdf_ctr() because the "null" hash has a digest size of 0. Fix it by rejecting hash algorithms with a digest size of 0. Signed-off-by: Eric Biggers Signed-off-by: David Howells Acked-by: Stephan Mueller Signed-off-by: James Morris --- security/keys/dh.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/security/keys/dh.c b/security/keys/dh.c index e603bd912e4c..8abc70ebe22d 100644 --- a/security/keys/dh.c +++ b/security/keys/dh.c @@ -89,6 +89,7 @@ static int kdf_alloc(struct kdf_sdesc **sdesc_ret, char *hashname) struct crypto_shash *tfm; struct kdf_sdesc *sdesc; int size; + int err; /* allocate synchronous hash */ tfm = crypto_alloc_shash(hashname, 0, 0); @@ -97,16 +98,25 @@ static int kdf_alloc(struct kdf_sdesc **sdesc_ret, char *hashname) return PTR_ERR(tfm); } + err = -EINVAL; + if (crypto_shash_digestsize(tfm) == 0) + goto out_free_tfm; + + err = -ENOMEM; size = sizeof(struct shash_desc) + crypto_shash_descsize(tfm); sdesc = kmalloc(size, GFP_KERNEL); if (!sdesc) - return -ENOMEM; + goto out_free_tfm; sdesc->shash.tfm = tfm; sdesc->shash.flags = 0x0; *sdesc_ret = sdesc; return 0; + +out_free_tfm: + crypto_free_shash(tfm); + return err; } static void kdf_dealloc(struct kdf_sdesc *sdesc) From 281590b4221779dbc4a5e2c33c0c5b0239cfe794 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:42 +0100 Subject: [PATCH 0648/1065] KEYS: DH: don't feed uninitialized "otherinfo" into KDF If userspace called KEYCTL_DH_COMPUTE with kdf_params containing NULL otherinfo but nonzero otherinfolen, the kernel would allocate a buffer for the otherinfo, then feed it into the KDF without initializing it. Fix this by always doing the copy from userspace (which will fail with EFAULT in this scenario). Signed-off-by: Eric Biggers Signed-off-by: David Howells Acked-by: Stephan Mueller Signed-off-by: James Morris --- security/keys/dh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/keys/dh.c b/security/keys/dh.c index 8abc70ebe22d..1c1cac677041 100644 --- a/security/keys/dh.c +++ b/security/keys/dh.c @@ -317,7 +317,7 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params, * Concatenate SP800-56A otherinfo past DH shared secret -- the * input to the KDF is (DH shared secret || otherinfo) */ - if (kdfcopy && kdfcopy->otherinfo && + if (kdfcopy && copy_from_user(kbuf + resultlen, kdfcopy->otherinfo, kdfcopy->otherinfolen) != 0) { ret = -EFAULT; From 0ddd9f1a6b7e5746b52959f645fc66859b805e88 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:49 +0100 Subject: [PATCH 0649/1065] KEYS: DH: ensure the KDF counter is properly aligned Accessing a 'u8[4]' through a '__be32 *' violates alignment rules. Just make the counter a __be32 instead. Signed-off-by: Eric Biggers Signed-off-by: David Howells Acked-by: Stephan Mueller Signed-off-by: James Morris --- security/keys/dh.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/security/keys/dh.c b/security/keys/dh.c index 1c1cac677041..63ac87d430db 100644 --- a/security/keys/dh.c +++ b/security/keys/dh.c @@ -130,14 +130,6 @@ static void kdf_dealloc(struct kdf_sdesc *sdesc) kzfree(sdesc); } -/* convert 32 bit integer into its string representation */ -static inline void crypto_kw_cpu_to_be32(u32 val, u8 *buf) -{ - __be32 *a = (__be32 *)buf; - - *a = cpu_to_be32(val); -} - /* * Implementation of the KDF in counter mode according to SP800-108 section 5.1 * as well as SP800-56A section 5.8.1 (Single-step KDF). @@ -154,16 +146,14 @@ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen, unsigned int h = crypto_shash_digestsize(desc->tfm); int err = 0; u8 *dst_orig = dst; - u32 i = 1; - u8 iteration[sizeof(u32)]; + __be32 counter = cpu_to_be32(1); while (dlen) { err = crypto_shash_init(desc); if (err) goto err; - crypto_kw_cpu_to_be32(i, iteration); - err = crypto_shash_update(desc, iteration, sizeof(u32)); + err = crypto_shash_update(desc, (u8 *)&counter, sizeof(__be32)); if (err) goto err; @@ -189,7 +179,7 @@ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen, dlen -= h; dst += h; - i++; + counter = cpu_to_be32(be32_to_cpu(counter) + 1); } } From a77395447b0aeab9473a066ff28fbee01130206b Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 8 Jun 2017 14:49:57 +0100 Subject: [PATCH 0650/1065] KEYS: DH: add __user annotations to keyctl_kdf_params Signed-off-by: Eric Biggers Signed-off-by: David Howells Acked-by: Stephan Mueller Signed-off-by: James Morris --- include/uapi/linux/keyctl.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/uapi/linux/keyctl.h b/include/uapi/linux/keyctl.h index 201c6644b237..ef16df06642a 100644 --- a/include/uapi/linux/keyctl.h +++ b/include/uapi/linux/keyctl.h @@ -70,8 +70,8 @@ struct keyctl_dh_params { }; struct keyctl_kdf_params { - char *hashname; - char *otherinfo; + char __user *hashname; + char __user *otherinfo; __u32 otherinfolen; __u32 __spare[8]; }; From da7798a7b6714cf35ea6084ad6b1fe0497566cf2 Mon Sep 17 00:00:00 2001 From: Loganaden Velvindron Date: Thu, 8 Jun 2017 14:50:04 +0100 Subject: [PATCH 0651/1065] crypto : asymmetric_keys : verify_pefile:zero memory content before freeing Signed-off-by: Loganaden Velvindron Signed-off-by: Yasir Auleear Signed-off-by: David Howells Signed-off-by: James Morris --- crypto/asymmetric_keys/verify_pefile.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/crypto/asymmetric_keys/verify_pefile.c b/crypto/asymmetric_keys/verify_pefile.c index 672a94c2c3ff..d178650fd524 100644 --- a/crypto/asymmetric_keys/verify_pefile.c +++ b/crypto/asymmetric_keys/verify_pefile.c @@ -381,7 +381,7 @@ static int pefile_digest_pe(const void *pebuf, unsigned int pelen, } error: - kfree(desc); + kzfree(desc); error_no_desc: crypto_free_shash(tfm); kleave(" = %d", ret); @@ -450,6 +450,6 @@ int verify_pefile_signature(const void *pebuf, unsigned pelen, ret = pefile_digest_pe(pebuf, pelen, &ctx); error: - kfree(ctx.digest); + kzfree(ctx.digest); return ret; } From 7cbe0932c2f2014d6e24e716e79ea3910b468950 Mon Sep 17 00:00:00 2001 From: Mat Martineau Date: Thu, 8 Jun 2017 14:50:11 +0100 Subject: [PATCH 0652/1065] KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API The initial Diffie-Hellman computation made direct use of the MPI library because the crypto module did not support DH at the time. Now that KPP is implemented, KEYCTL_DH_COMPUTE should use it to get rid of duplicate code and leverage possible hardware acceleration. This fixes an issue whereby the input to the KDF computation would include additional uninitialized memory when the result of the Diffie-Hellman computation was shorter than the input prime number. Signed-off-by: Mat Martineau Signed-off-by: David Howells Signed-off-by: James Morris --- security/keys/Kconfig | 2 +- security/keys/dh.c | 284 ++++++++++++++++++++++++++---------------- 2 files changed, 177 insertions(+), 109 deletions(-) diff --git a/security/keys/Kconfig b/security/keys/Kconfig index 00b7431a8aeb..a7a23b5541f8 100644 --- a/security/keys/Kconfig +++ b/security/keys/Kconfig @@ -93,9 +93,9 @@ config ENCRYPTED_KEYS config KEY_DH_OPERATIONS bool "Diffie-Hellman operations on retained keys" depends on KEYS - select MPILIB select CRYPTO select CRYPTO_HASH + select CRYPTO_DH help This option provides support for calculating Diffie-Hellman public keys and shared secrets using values stored as keys diff --git a/security/keys/dh.c b/security/keys/dh.c index 63ac87d430db..4755d4b4f945 100644 --- a/security/keys/dh.c +++ b/security/keys/dh.c @@ -8,34 +8,17 @@ * 2 of the License, or (at your option) any later version. */ -#include #include #include +#include #include #include +#include +#include #include #include "internal.h" -/* - * Public key or shared secret generation function [RFC2631 sec 2.1.1] - * - * ya = g^xa mod p; - * or - * ZZ = yb^xa mod p; - * - * where xa is the local private key, ya is the local public key, g is - * the generator, p is the prime, yb is the remote public key, and ZZ - * is the shared secret. - * - * Both are the same calculation, so g or yb are the "base" and ya or - * ZZ are the "result". - */ -static int do_dh(MPI result, MPI base, MPI xa, MPI p) -{ - return mpi_powm(result, base, xa, p); -} - -static ssize_t mpi_from_key(key_serial_t keyid, size_t maxlen, MPI *mpi) +static ssize_t dh_data_from_key(key_serial_t keyid, void **data) { struct key *key; key_ref_t key_ref; @@ -56,19 +39,17 @@ static ssize_t mpi_from_key(key_serial_t keyid, size_t maxlen, MPI *mpi) status = key_validate(key); if (status == 0) { const struct user_key_payload *payload; + uint8_t *duplicate; payload = user_key_payload_locked(key); - if (maxlen == 0) { - *mpi = NULL; + duplicate = kmemdup(payload->data, payload->datalen, + GFP_KERNEL); + if (duplicate) { + *data = duplicate; ret = payload->datalen; - } else if (payload->datalen <= maxlen) { - *mpi = mpi_read_raw_data(payload->data, - payload->datalen); - if (*mpi) - ret = payload->datalen; } else { - ret = -EINVAL; + ret = -ENOMEM; } } up_read(&key->sem); @@ -79,6 +60,29 @@ error: return ret; } +static void dh_free_data(struct dh *dh) +{ + kzfree(dh->key); + kzfree(dh->p); + kzfree(dh->g); +} + +struct dh_completion { + struct completion completion; + int err; +}; + +static void dh_crypto_done(struct crypto_async_request *req, int err) +{ + struct dh_completion *compl = req->data; + + if (err == -EINPROGRESS) + return; + + compl->err = err; + complete(&compl->completion); +} + struct kdf_sdesc { struct shash_desc shash; char ctx[]; @@ -140,7 +144,7 @@ static void kdf_dealloc(struct kdf_sdesc *sdesc) * 5.8.1.2). */ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen, - u8 *dst, unsigned int dlen) + u8 *dst, unsigned int dlen, unsigned int zlen) { struct shash_desc *desc = &sdesc->shash; unsigned int h = crypto_shash_digestsize(desc->tfm); @@ -157,6 +161,22 @@ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen, if (err) goto err; + if (zlen && h) { + u8 tmpbuffer[h]; + size_t chunk = min_t(size_t, zlen, h); + memset(tmpbuffer, 0, chunk); + + do { + err = crypto_shash_update(desc, tmpbuffer, + chunk); + if (err) + goto err; + + zlen -= chunk; + chunk = min_t(size_t, zlen, h); + } while (zlen); + } + if (src && slen) { err = crypto_shash_update(desc, src, slen); if (err) @@ -192,7 +212,7 @@ err: static int keyctl_dh_compute_kdf(struct kdf_sdesc *sdesc, char __user *buffer, size_t buflen, - uint8_t *kbuf, size_t kbuflen) + uint8_t *kbuf, size_t kbuflen, size_t lzero) { uint8_t *outbuf = NULL; int ret; @@ -203,7 +223,7 @@ static int keyctl_dh_compute_kdf(struct kdf_sdesc *sdesc, goto err; } - ret = kdf_ctr(sdesc, kbuf, kbuflen, outbuf, buflen); + ret = kdf_ctr(sdesc, kbuf, kbuflen, outbuf, buflen, lzero); if (ret) goto err; @@ -221,21 +241,26 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params, struct keyctl_kdf_params *kdfcopy) { long ret; - MPI base, private, prime, result; - unsigned nbytes; + ssize_t dlen; + int secretlen; + int outlen; struct keyctl_dh_params pcopy; - uint8_t *kbuf; - ssize_t keylen; - size_t resultlen; + struct dh dh_inputs; + struct scatterlist outsg; + struct dh_completion compl; + struct crypto_kpp *tfm; + struct kpp_request *req; + uint8_t *secret; + uint8_t *outbuf; struct kdf_sdesc *sdesc = NULL; if (!params || (!buffer && buflen)) { ret = -EINVAL; - goto out; + goto out1; } if (copy_from_user(&pcopy, params, sizeof(pcopy)) != 0) { ret = -EFAULT; - goto out; + goto out1; } if (kdfcopy) { @@ -244,104 +269,147 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params, if (buflen > KEYCTL_KDF_MAX_OUTPUT_LEN || kdfcopy->otherinfolen > KEYCTL_KDF_MAX_OI_LEN) { ret = -EMSGSIZE; - goto out; + goto out1; } /* get KDF name string */ hashname = strndup_user(kdfcopy->hashname, CRYPTO_MAX_ALG_NAME); if (IS_ERR(hashname)) { ret = PTR_ERR(hashname); - goto out; + goto out1; } /* allocate KDF from the kernel crypto API */ ret = kdf_alloc(&sdesc, hashname); kfree(hashname); if (ret) - goto out; + goto out1; } - /* - * If the caller requests postprocessing with a KDF, allow an - * arbitrary output buffer size since the KDF ensures proper truncation. - */ - keylen = mpi_from_key(pcopy.prime, kdfcopy ? SIZE_MAX : buflen, &prime); - if (keylen < 0 || !prime) { - /* buflen == 0 may be used to query the required buffer size, - * which is the prime key length. - */ - ret = keylen; - goto out; + memset(&dh_inputs, 0, sizeof(dh_inputs)); + + dlen = dh_data_from_key(pcopy.prime, &dh_inputs.p); + if (dlen < 0) { + ret = dlen; + goto out1; } + dh_inputs.p_size = dlen; - /* The result is never longer than the prime */ - resultlen = keylen; - - keylen = mpi_from_key(pcopy.base, SIZE_MAX, &base); - if (keylen < 0 || !base) { - ret = keylen; - goto error1; + dlen = dh_data_from_key(pcopy.base, &dh_inputs.g); + if (dlen < 0) { + ret = dlen; + goto out2; } + dh_inputs.g_size = dlen; - keylen = mpi_from_key(pcopy.private, SIZE_MAX, &private); - if (keylen < 0 || !private) { - ret = keylen; - goto error2; + dlen = dh_data_from_key(pcopy.private, &dh_inputs.key); + if (dlen < 0) { + ret = dlen; + goto out2; } + dh_inputs.key_size = dlen; - result = mpi_alloc(0); - if (!result) { + secretlen = crypto_dh_key_len(&dh_inputs); + secret = kmalloc(secretlen, GFP_KERNEL); + if (!secret) { ret = -ENOMEM; - goto error3; + goto out2; } - - /* allocate space for DH shared secret and SP800-56A otherinfo */ - kbuf = kmalloc(kdfcopy ? (resultlen + kdfcopy->otherinfolen) : resultlen, - GFP_KERNEL); - if (!kbuf) { - ret = -ENOMEM; - goto error4; - } - - /* - * Concatenate SP800-56A otherinfo past DH shared secret -- the - * input to the KDF is (DH shared secret || otherinfo) - */ - if (kdfcopy && - copy_from_user(kbuf + resultlen, kdfcopy->otherinfo, - kdfcopy->otherinfolen) != 0) { - ret = -EFAULT; - goto error5; - } - - ret = do_dh(result, base, private, prime); + ret = crypto_dh_encode_key(secret, secretlen, &dh_inputs); if (ret) - goto error5; + goto out3; - ret = mpi_read_buffer(result, kbuf, resultlen, &nbytes, NULL); - if (ret != 0) - goto error5; + tfm = crypto_alloc_kpp("dh", CRYPTO_ALG_TYPE_KPP, 0); + if (IS_ERR(tfm)) { + ret = PTR_ERR(tfm); + goto out3; + } + + ret = crypto_kpp_set_secret(tfm, secret, secretlen); + if (ret) + goto out4; + + outlen = crypto_kpp_maxsize(tfm); + + if (!kdfcopy) { + /* + * When not using a KDF, buflen 0 is used to read the + * required buffer length + */ + if (buflen == 0) { + ret = outlen; + goto out4; + } else if (outlen > buflen) { + ret = -EOVERFLOW; + goto out4; + } + } + + outbuf = kzalloc(kdfcopy ? (outlen + kdfcopy->otherinfolen) : outlen, + GFP_KERNEL); + if (!outbuf) { + ret = -ENOMEM; + goto out4; + } + + sg_init_one(&outsg, outbuf, outlen); + + req = kpp_request_alloc(tfm, GFP_KERNEL); + if (!req) { + ret = -ENOMEM; + goto out5; + } + + kpp_request_set_input(req, NULL, 0); + kpp_request_set_output(req, &outsg, outlen); + init_completion(&compl.completion); + kpp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG | + CRYPTO_TFM_REQ_MAY_SLEEP, + dh_crypto_done, &compl); + + /* + * For DH, generate_public_key and generate_shared_secret are + * the same calculation + */ + ret = crypto_kpp_generate_public_key(req); + if (ret == -EINPROGRESS) { + wait_for_completion(&compl.completion); + ret = compl.err; + if (ret) + goto out6; + } if (kdfcopy) { - ret = keyctl_dh_compute_kdf(sdesc, buffer, buflen, kbuf, - resultlen + kdfcopy->otherinfolen); - } else { - ret = nbytes; - if (copy_to_user(buffer, kbuf, nbytes) != 0) + /* + * Concatenate SP800-56A otherinfo past DH shared secret -- the + * input to the KDF is (DH shared secret || otherinfo) + */ + if (copy_from_user(outbuf + req->dst_len, kdfcopy->otherinfo, + kdfcopy->otherinfolen) != 0) { ret = -EFAULT; + goto out6; + } + + ret = keyctl_dh_compute_kdf(sdesc, buffer, buflen, outbuf, + req->dst_len + kdfcopy->otherinfolen, + outlen - req->dst_len); + } else if (copy_to_user(buffer, outbuf, req->dst_len) == 0) { + ret = req->dst_len; + } else { + ret = -EFAULT; } -error5: - kzfree(kbuf); -error4: - mpi_free(result); -error3: - mpi_free(private); -error2: - mpi_free(base); -error1: - mpi_free(prime); -out: +out6: + kpp_request_free(req); +out5: + kzfree(outbuf); +out4: + crypto_free_kpp(tfm); +out3: + kzfree(secret); +out2: + dh_free_data(&dh_inputs); +out1: kdf_dealloc(sdesc); return ret; } From 92347cfd62c174ab91ad97dd4bfbaa1d4aa28e67 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 8 Jun 2017 14:47:41 +0100 Subject: [PATCH 0653/1065] KEYS: fix refcount_inc() on zero If a key's refcount is dropped to zero between key_lookup() peeking at the refcount and subsequently attempting to increment it, refcount_inc() will see a zero refcount. Here, refcount_inc() will WARN_ONCE(), and will *not* increment the refcount, which will remain zero. Once key_lookup() drops key_serial_lock, it is possible for the key to be freed behind our back. This patch uses refcount_inc_not_zero() to perform the peek and increment atomically. Fixes: fff292914d3a2f1e ("security, keys: convert key.usage from atomic_t to refcount_t") Signed-off-by: Mark Rutland Signed-off-by: David Howells Cc: David Windsor Cc: Elena Reshetova Cc: Hans Liljestrand Cc: James Morris Cc: Kees Cook Cc: Peter Zijlstra Signed-off-by: James Morris --- security/keys/key.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/security/keys/key.c b/security/keys/key.c index cbae368c0e57..83da68d98b40 100644 --- a/security/keys/key.c +++ b/security/keys/key.c @@ -660,14 +660,11 @@ not_found: goto error; found: - /* pretend it doesn't exist if it is awaiting deletion */ - if (refcount_read(&key->usage) == 0) - goto not_found; - - /* this races with key_put(), but that doesn't matter since key_put() - * doesn't actually change the key + /* A key is allowed to be looked up only if someone still owns a + * reference to it - otherwise it's awaiting the gc. */ - __key_get(key); + if (!refcount_inc_not_zero(&key->usage)) + goto not_found; error: spin_unlock(&key_serial_lock); From 73d4e580ccc5c3e05cea002f18111f66c9c07034 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 2 Jun 2017 20:00:17 -0700 Subject: [PATCH 0654/1065] target: Fix kref->refcount underflow in transport_cmd_finish_abort This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED when a fabric driver drops it's second reference from below the target_core_tmr.c based callers of transport_cmd_finish_abort(). Recently with the conversion of kref to refcount_t, this bug was manifesting itself as: [705519.601034] refcount_t: underflow; use-after-free. [705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs [705539.719111] ------------[ cut here ]------------ [705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51 Since the original kref atomic_t based kref_put() didn't check for underflow and only invoked the final callback when zero was reached, this bug did not manifest in practice since all se_cmd memory is using preallocated tags. To address this, go ahead and propigate the existing return from transport_put_cmd() up via transport_cmd_finish_abort(), and change transport_cmd_finish_abort() + core_tmr_handle_tas_abort() callers to only do their local target_put_sess_cmd() if necessary. Reported-by: Bart Van Assche Tested-by: Bart Van Assche Cc: Mike Christie Cc: Hannes Reinecke Cc: Christoph Hellwig Cc: Himanshu Madhani Cc: Sagi Grimberg Cc: stable@vger.kernel.org # 3.14+ Tested-by: Gary Guo Tested-by: Chu Yuan Lin Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_internal.h | 2 +- drivers/target/target_core_tmr.c | 16 ++++++++-------- drivers/target/target_core_transport.c | 9 ++++++--- 3 files changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h index 9ab7090f7c83..0912de7c0cf8 100644 --- a/drivers/target/target_core_internal.h +++ b/drivers/target/target_core_internal.h @@ -136,7 +136,7 @@ int init_se_kmem_caches(void); void release_se_kmem_caches(void); u32 scsi_get_new_index(scsi_index_t); void transport_subsystem_check_init(void); -void transport_cmd_finish_abort(struct se_cmd *, int); +int transport_cmd_finish_abort(struct se_cmd *, int); unsigned char *transport_dump_cmd_direction(struct se_cmd *); void transport_dump_dev_state(struct se_device *, char *, int *); void transport_dump_dev_info(struct se_device *, struct se_lun *, diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index dce1e1b47316..13f47bf4d16b 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -75,7 +75,7 @@ void core_tmr_release_req(struct se_tmr_req *tmr) kfree(tmr); } -static void core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas) +static int core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas) { unsigned long flags; bool remove = true, send_tas; @@ -91,7 +91,7 @@ static void core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas) transport_send_task_abort(cmd); } - transport_cmd_finish_abort(cmd, remove); + return transport_cmd_finish_abort(cmd, remove); } static int target_check_cdb_and_preempt(struct list_head *list, @@ -184,8 +184,8 @@ void core_tmr_abort_task( cancel_work_sync(&se_cmd->work); transport_wait_for_tasks(se_cmd); - transport_cmd_finish_abort(se_cmd, true); - target_put_sess_cmd(se_cmd); + if (!transport_cmd_finish_abort(se_cmd, true)) + target_put_sess_cmd(se_cmd); printk("ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for" " ref_tag: %llu\n", ref_tag); @@ -281,8 +281,8 @@ static void core_tmr_drain_tmr_list( cancel_work_sync(&cmd->work); transport_wait_for_tasks(cmd); - transport_cmd_finish_abort(cmd, 1); - target_put_sess_cmd(cmd); + if (!transport_cmd_finish_abort(cmd, 1)) + target_put_sess_cmd(cmd); } } @@ -380,8 +380,8 @@ static void core_tmr_drain_state_list( cancel_work_sync(&cmd->work); transport_wait_for_tasks(cmd); - core_tmr_handle_tas_abort(cmd, tas); - target_put_sess_cmd(cmd); + if (!core_tmr_handle_tas_abort(cmd, tas)) + target_put_sess_cmd(cmd); } } diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 6025935036c9..f1b3a46bdcaf 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -651,9 +651,10 @@ static void transport_lun_remove_cmd(struct se_cmd *cmd) percpu_ref_put(&lun->lun_ref); } -void transport_cmd_finish_abort(struct se_cmd *cmd, int remove) +int transport_cmd_finish_abort(struct se_cmd *cmd, int remove) { bool ack_kref = (cmd->se_cmd_flags & SCF_ACK_KREF); + int ret = 0; if (cmd->se_cmd_flags & SCF_SE_LUN_CMD) transport_lun_remove_cmd(cmd); @@ -665,9 +666,11 @@ void transport_cmd_finish_abort(struct se_cmd *cmd, int remove) cmd->se_tfo->aborted_task(cmd); if (transport_cmd_check_stop_to_fabric(cmd)) - return; + return 1; if (remove && ack_kref) - transport_put_cmd(cmd); + ret = transport_put_cmd(cmd); + + return ret; } static void target_complete_failure_work(struct work_struct *work) From 105fa2f44e504c830697b0c794822112d79808dc Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 3 Jun 2017 05:35:47 -0700 Subject: [PATCH 0655/1065] iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP This patch fixes a BUG() in iscsit_close_session() that could be triggered when iscsit_logout_post_handler() execution from within tx thread context was not run for more than SECONDS_FOR_LOGOUT_COMP (15 seconds), and the TCP connection didn't already close before then forcing tx thread context to automatically exit. This would manifest itself during explicit logout as: [33206.974254] 1 connection(s) still exist for iSCSI session to iqn.1993-08.org.debian:01:3f5523242179 [33206.980184] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 2100.772 msecs [33209.078643] ------------[ cut here ]------------ [33209.078646] kernel BUG at drivers/target/iscsi/iscsi_target.c:4346! Normally when explicit logout attempt fails, the tx thread context exits and iscsit_close_connection() from rx thread context does the extra cleanup once it detects conn->conn_logout_remove has not been cleared by the logout type specific post handlers. To address this special case, if the logout post handler in tx thread context detects conn->tx_thread_active has already been cleared, simply return and exit in order for existing iscsit_close_connection() logic from rx thread context do failed logout cleanup. Reported-by: Bart Van Assche Tested-by: Bart Van Assche Cc: Mike Christie Cc: Hannes Reinecke Cc: Sagi Grimberg Cc: stable@vger.kernel.org # 3.14+ Tested-by: Gary Guo Tested-by: Chu Yuan Lin Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 0d8f81591bed..c0254516b380 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -4423,8 +4423,11 @@ static void iscsit_logout_post_handler_closesession( * always sleep waiting for RX/TX thread shutdown to complete * within iscsit_close_connection(). */ - if (!conn->conn_transport->rdma_shutdown) + if (!conn->conn_transport->rdma_shutdown) { sleep = cmpxchg(&conn->tx_thread_active, true, false); + if (!sleep) + return; + } atomic_set(&conn->conn_logout_remove, 0); complete(&conn->conn_logout_comp); @@ -4440,8 +4443,11 @@ static void iscsit_logout_post_handler_samecid( { int sleep = 1; - if (!conn->conn_transport->rdma_shutdown) + if (!conn->conn_transport->rdma_shutdown) { sleep = cmpxchg(&conn->tx_thread_active, true, false); + if (!sleep) + return; + } atomic_set(&conn->conn_logout_remove, 0); complete(&conn->conn_logout_comp); From abb85a9b512e8ca7ad04a5a8a6db9664fe644974 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 7 Jun 2017 20:29:50 -0700 Subject: [PATCH 0656/1065] iscsi-target: Reject immediate data underflow larger than SCSI transfer length When iscsi WRITE underflow occurs there are two different scenarios that can happen. Normally in practice, when an EDTL vs. SCSI CDB TRANSFER LENGTH underflow is detected, the iscsi immediate data payload is the smaller SCSI CDB TRANSFER LENGTH. That is, when a host fabric LLD is using a fixed size EDTL for a specific control CDB, the SCSI CDB TRANSFER LENGTH and actual SCSI payload ends up being smaller than EDTL. In iscsi, this means the received iscsi immediate data payload matches the smaller SCSI CDB TRANSFER LENGTH, because there is no more SCSI payload to accept beyond SCSI CDB TRANSFER LENGTH. However, it's possible for a malicous host to send a WRITE underflow where EDTL is larger than SCSI CDB TRANSFER LENGTH, but incoming iscsi immediate data actually matches EDTL. In the wild, we've never had a iscsi host environment actually try to do this. For this special case, it's wrong to truncate part of the control CDB payload and continue to process the command during underflow when immediate data payload received was larger than SCSI CDB TRANSFER LENGTH, so go ahead and reject and drop the bogus payload as a defensive action. Note this potential bug was originally relaxed by the following for allowing WRITE underflow in MSFT FCP host environments: commit c72c5250224d475614a00c1d7e54a67f77cd3410 Author: Roland Dreier Date: Wed Jul 22 15:08:18 2015 -0700 target: allow underflow/overflow for PR OUT etc. commands Cc: Roland Dreier Cc: Mike Christie Cc: Hannes Reinecke Cc: Martin K. Petersen Cc: # v4.3+ Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index c0254516b380..3fdca2cdd8da 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1279,6 +1279,18 @@ iscsit_get_immediate_data(struct iscsi_cmd *cmd, struct iscsi_scsi_req *hdr, */ if (dump_payload) goto after_immediate_data; + /* + * Check for underflow case where both EDTL and immediate data payload + * exceeds what is presented by CDB's TRANSFER LENGTH, and what has + * already been set in target_cmd_size_check() as se_cmd->data_length. + * + * For this special case, fail the command and dump the immediate data + * payload. + */ + if (cmd->first_burst_len > cmd->se_cmd.data_length) { + cmd->sense_reason = TCM_INVALID_CDB_FIELD; + goto after_immediate_data; + } immed_ret = iscsit_handle_immediate_data(cmd, hdr, cmd->first_burst_len); From c528eb27a3be2600e724c8a57cb69eab1fd9afa2 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Thu, 1 Jun 2017 14:18:25 +0200 Subject: [PATCH 0657/1065] gpio: mvebu: fix blink counter register selection The blink counter A was always selected because 0 was forced in the blink select counter register. The variable 'set' was obviously there to be used as the register value, selecting the B counter when id==1 and A counter when id==0. Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Reviewed-by: Gregory CLEMENT Reviewed-by: Ralph Sennhauser Signed-off-by: Richard Genoud Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 19a92efabbef..cdef2c78cb3b 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -747,7 +747,7 @@ static int mvebu_pwm_probe(struct platform_device *pdev, set = U32_MAX; else return -EINVAL; - writel_relaxed(0, mvebu_gpioreg_blink_counter_select(mvchip)); + writel_relaxed(set, mvebu_gpioreg_blink_counter_select(mvchip)); mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), GFP_KERNEL); if (!mvpwm) From fc7a90686777e7d2da7a08cf0202c21f3b96febb Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Thu, 1 Jun 2017 14:18:26 +0200 Subject: [PATCH 0658/1065] gpio: mvebu: fix gpio bank registration when pwm is used If more than one gpio bank has the "pwm" property, only one will be registered successfully, all the others will fail with: mvebu-gpio: probe of f1018140.gpio failed with error -17 That's because in alloc_pwms(), the chip->base (aka "int pwm"), was not set (thus, ==0) ; and 0 is a meaningful start value in alloc_pwm(). What was intended is mvpwm->chip->base = -1. Like that, the numbering will be done auto-magically Moreover, as the region might be already occupied by another pwm, we shouldn't force: mvpwm->chip->base = 0 nor mvpwm->chip->base = id * MVEBU_MAX_GPIO_PER_BANK; Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Richard Genoud Reviewed-by: Gregory CLEMENT Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index cdef2c78cb3b..5104b6398139 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -768,6 +768,13 @@ static int mvebu_pwm_probe(struct platform_device *pdev, mvpwm->chip.dev = dev; mvpwm->chip.ops = &mvebu_pwm_ops; mvpwm->chip.npwm = mvchip->chip.ngpio; + /* + * There may already be some PWM allocated, so we can't force + * mvpwm->chip.base to a fixed point like mvchip->chip.base. + * So, we let pwmchip_add() do the numbering and take the next free + * region. + */ + mvpwm->chip.base = -1; spin_lock_init(&mvpwm->lock); From ba714a9c1dea85e0bf2899d02dfeb9c70040427c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 23 May 2017 23:23:32 +0200 Subject: [PATCH 0659/1065] pinctrl/amd: Use regular interrupt instead of chained The AMD pinctrl driver uses a chained interrupt to demultiplex the GPIO interrupts. Kevin Vandeventer reported, that his new AMD Ryzen locks up hard on boot when the AMD pinctrl driver is initialized. The reason is an interrupt storm. It's not clear whether that's caused by hardware or firmware or both. Using chained interrupts on X86 is a dangerous endavour. If a system is misconfigured or the hardware buggy there is no safety net to catch an interrupt storm. Convert the driver to use a regular interrupt for the demultiplex handler. This allows the interrupt storm detector to catch the malfunction and lets the system boot up. This should be backported to stable because it's likely that more users run into this problem as the AMD Ryzen machines are spreading. Reported-by: Kevin Vandeventer Link: https://bugzilla.suse.com/show_bug.cgi?id=1034261 Signed-off-by: Thomas Gleixner Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 91 ++++++++++++++++------------------- 1 file changed, 41 insertions(+), 50 deletions(-) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 1482d132fbb8..e432ec887479 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -495,64 +495,54 @@ static struct irq_chip amd_gpio_irqchip = { .flags = IRQCHIP_SKIP_SET_WAKE, }; -static void amd_gpio_irq_handler(struct irq_desc *desc) +#define PIN_IRQ_PENDING (BIT(INTERRUPT_STS_OFF) | BIT(WAKE_STS_OFF)) + +static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id) { - u32 i; - u32 off; - u32 reg; - u32 pin_reg; - u64 reg64; - int handled = 0; - unsigned int irq; + struct amd_gpio *gpio_dev = dev_id; + struct gpio_chip *gc = &gpio_dev->gc; + irqreturn_t ret = IRQ_NONE; + unsigned int i, irqnr; unsigned long flags; - struct irq_chip *chip = irq_desc_get_chip(desc); - struct gpio_chip *gc = irq_desc_get_handler_data(desc); - struct amd_gpio *gpio_dev = gpiochip_get_data(gc); + u32 *regs, regval; + u64 status, mask; - chained_irq_enter(chip, desc); - /*enable GPIO interrupt again*/ + /* Read the wake status */ raw_spin_lock_irqsave(&gpio_dev->lock, flags); - reg = readl(gpio_dev->base + WAKE_INT_STATUS_REG1); - reg64 = reg; - reg64 = reg64 << 32; - - reg = readl(gpio_dev->base + WAKE_INT_STATUS_REG0); - reg64 |= reg; + status = readl(gpio_dev->base + WAKE_INT_STATUS_REG1); + status <<= 32; + status |= readl(gpio_dev->base + WAKE_INT_STATUS_REG0); raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); - /* - * first 46 bits indicates interrupt status. - * one bit represents four interrupt sources. - */ - for (off = 0; off < 46 ; off++) { - if (reg64 & BIT(off)) { - for (i = 0; i < 4; i++) { - pin_reg = readl(gpio_dev->base + - (off * 4 + i) * 4); - if ((pin_reg & BIT(INTERRUPT_STS_OFF)) || - (pin_reg & BIT(WAKE_STS_OFF))) { - irq = irq_find_mapping(gc->irqdomain, - off * 4 + i); - generic_handle_irq(irq); - writel(pin_reg, - gpio_dev->base - + (off * 4 + i) * 4); - handled++; - } - } + /* Bit 0-45 contain the relevant status bits */ + status &= (1ULL << 46) - 1; + regs = gpio_dev->base; + for (mask = 1, irqnr = 0; status; mask <<= 1, regs += 4, irqnr += 4) { + if (!(status & mask)) + continue; + status &= ~mask; + + /* Each status bit covers four pins */ + for (i = 0; i < 4; i++) { + regval = readl(regs + i); + if (!(regval & PIN_IRQ_PENDING)) + continue; + irq = irq_find_mapping(gc->irqdomain, irqnr + i); + generic_handle_irq(irq); + /* Clear interrupt */ + writel(regval, regs + i); + ret = IRQ_HANDLED; } } - if (handled == 0) - handle_bad_irq(desc); - + /* Signal EOI to the GPIO unit */ raw_spin_lock_irqsave(&gpio_dev->lock, flags); - reg = readl(gpio_dev->base + WAKE_INT_MASTER_REG); - reg |= EOI_MASK; - writel(reg, gpio_dev->base + WAKE_INT_MASTER_REG); + regval = readl(gpio_dev->base + WAKE_INT_MASTER_REG); + regval |= EOI_MASK; + writel(regval, gpio_dev->base + WAKE_INT_MASTER_REG); raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); - chained_irq_exit(chip, desc); + return ret; } static int amd_get_groups_count(struct pinctrl_dev *pctldev) @@ -821,10 +811,11 @@ static int amd_gpio_probe(struct platform_device *pdev) goto out2; } - gpiochip_set_chained_irqchip(&gpio_dev->gc, - &amd_gpio_irqchip, - irq_base, - amd_gpio_irq_handler); + ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler, 0, + KBUILD_MODNAME, gpio_dev); + if (ret) + goto out2; + platform_set_drvdata(pdev, gpio_dev); dev_dbg(&pdev->dev, "amd gpio driver loaded\n"); From b7c747d4627462f25b3daabf49c18895a6722faa Mon Sep 17 00:00:00 2001 From: Alexandre TORGUE Date: Tue, 30 May 2017 16:43:04 +0200 Subject: [PATCH 0660/1065] pinctrl: stm32: Fix bad function call In stm32_pconf_parse_conf function, stm32_pmx_gpio_set_direction is called with wrong parameter value. Indeed, using NULL value for range will raise an oops. Fixes: aceb16dc2da5 ("pinctrl: Add STM32 MCUs support") Reported-by: Dan Carpenter Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij --- drivers/pinctrl/stm32/pinctrl-stm32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index d3c5f5dfbbd7..222b6685b09f 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -798,7 +798,7 @@ static int stm32_pconf_parse_conf(struct pinctrl_dev *pctldev, break; case PIN_CONFIG_OUTPUT: __stm32_gpio_set(bank, offset, arg); - ret = stm32_pmx_gpio_set_direction(pctldev, NULL, pin, false); + ret = stm32_pmx_gpio_set_direction(pctldev, range, pin, false); break; default: ret = -EINVAL; From ed45509b550488f6a71a4b6cc5b12265e8c1f85d Mon Sep 17 00:00:00 2001 From: Vaibhav Jain Date: Fri, 2 Jun 2017 22:26:48 +0530 Subject: [PATCH 0661/1065] cxl: Avoid double free_irq() for psl,slice interrupts During an eeh call to cxl_remove can result in double free_irq of psl,slice interrupts. This can happen if perst_reloads_same_image == 1 and call to cxl_configure_adapter() fails during slot_reset callback. In such a case we see a kernel oops with following back-trace: Oops: Kernel access of bad area, sig: 11 [#1] Call Trace: free_irq+0x88/0xd0 (unreliable) cxl_unmap_irq+0x20/0x40 [cxl] cxl_native_release_psl_irq+0x78/0xd8 [cxl] pci_deconfigure_afu+0xac/0x110 [cxl] cxl_remove+0x104/0x210 [cxl] pci_device_remove+0x6c/0x110 device_release_driver_internal+0x204/0x2e0 pci_stop_bus_device+0xa0/0xd0 pci_stop_and_remove_bus_device+0x28/0x40 pci_hp_remove_devices+0xb0/0x150 pci_hp_remove_devices+0x68/0x150 eeh_handle_normal_event+0x140/0x580 eeh_handle_event+0x174/0x360 eeh_event_handler+0x1e8/0x1f0 This patch fixes the issue of double free_irq by checking that variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are not '0' before un-mapping and resetting these variables to '0' when they are un-mapped. Cc: stable@vger.kernel.org Signed-off-by: Vaibhav Jain Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cxl/native.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c index 871a2f09c718..8d6ea9712dbd 100644 --- a/drivers/misc/cxl/native.c +++ b/drivers/misc/cxl/native.c @@ -1302,13 +1302,16 @@ int cxl_native_register_psl_err_irq(struct cxl *adapter) void cxl_native_release_psl_err_irq(struct cxl *adapter) { - if (adapter->native->err_virq != irq_find_mapping(NULL, adapter->native->err_hwirq)) + if (adapter->native->err_virq == 0 || + adapter->native->err_virq != + irq_find_mapping(NULL, adapter->native->err_hwirq)) return; cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000); cxl_unmap_irq(adapter->native->err_virq, adapter); cxl_ops->release_one_irq(adapter, adapter->native->err_hwirq); kfree(adapter->irq_name); + adapter->native->err_virq = 0; } int cxl_native_register_serr_irq(struct cxl_afu *afu) @@ -1346,13 +1349,15 @@ int cxl_native_register_serr_irq(struct cxl_afu *afu) void cxl_native_release_serr_irq(struct cxl_afu *afu) { - if (afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq)) + if (afu->serr_virq == 0 || + afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq)) return; cxl_p1n_write(afu, CXL_PSL_SERR_An, 0x0000000000000000); cxl_unmap_irq(afu->serr_virq, afu); cxl_ops->release_one_irq(afu->adapter, afu->serr_hwirq); kfree(afu->err_irq_name); + afu->serr_virq = 0; } int cxl_native_register_psl_irq(struct cxl_afu *afu) @@ -1375,12 +1380,15 @@ int cxl_native_register_psl_irq(struct cxl_afu *afu) void cxl_native_release_psl_irq(struct cxl_afu *afu) { - if (afu->native->psl_virq != irq_find_mapping(NULL, afu->native->psl_hwirq)) + if (afu->native->psl_virq == 0 || + afu->native->psl_virq != + irq_find_mapping(NULL, afu->native->psl_hwirq)) return; cxl_unmap_irq(afu->native->psl_virq, afu); cxl_ops->release_one_irq(afu->adapter, afu->native->psl_hwirq); kfree(afu->psl_irq_name); + afu->native->psl_virq = 0; } static void recover_psl_err(struct cxl_afu *afu, u64 errstat) From ff3416fb5b02cfae94591ef4395b0b4dc793f25e Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 18 May 2017 10:22:22 +0200 Subject: [PATCH 0662/1065] can: dev: make can_change_state() robust to be called with cf == NULL In OOM situations where no skb can be allocated, can_change_state() may be called with cf == NULL. As this function updates the state and error statistics it's not an option to skip the call to can_change_state() in OOM situations. This patch makes can_change_state() robust, so that it can be called with cf == NULL. Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 611d16a7061d..ae4ed03dc642 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -391,6 +391,9 @@ void can_change_state(struct net_device *dev, struct can_frame *cf, can_update_state_error_stats(dev, new_state); priv->state = new_state; + if (!cf) + return; + if (unlikely(new_state == CAN_STATE_BUS_OFF)) { cf->can_id |= CAN_ERR_BUSOFF; return; From f2a918b40cea994f9524ace67fd05ef42a8d9e5b Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Wed, 3 May 2017 10:35:04 +0200 Subject: [PATCH 0663/1065] can: peak_canfd: fix uninitialized symbol warnings This patch fixes two uninitialized symbol warnings in the new code adding support of the PEAK-System PCAN-PCI Express FD boards, in the socket-CAN network protocol family. Signed-off-by: Stephane Grosjean Reported-by: Dan Carpenter Signed-off-by: Marc Kleine-Budde --- drivers/net/can/peak_canfd/peak_canfd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/peak_canfd/peak_canfd.c b/drivers/net/can/peak_canfd/peak_canfd.c index 0d57be5ea97b..85268be0c913 100644 --- a/drivers/net/can/peak_canfd/peak_canfd.c +++ b/drivers/net/can/peak_canfd/peak_canfd.c @@ -489,7 +489,7 @@ int peak_canfd_handle_msgs_list(struct peak_canfd_priv *priv, struct pucan_rx_msg *msg_list, int msg_count) { void *msg_ptr = msg_list; - int i, msg_size; + int i, msg_size = 0; for (i = 0; i < msg_count; i++) { msg_size = peak_canfd_handle_msg(priv, msg_ptr); From dadcd398b3f059a0aa9de1cac8030a1d5a3791a5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 12 May 2017 12:09:25 +0200 Subject: [PATCH 0664/1065] can: peak_usb: fix product-id endianness in error message Make sure to use the USB device product-id stored in host-byte order in a probe error message. Also remove a redundant reassignment of the local usb_dev variable which had already been used to retrieve the product id. Signed-off-by: Johan Hovold Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index 57913dbbae0a..1ca76e03e965 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -908,8 +908,6 @@ static int peak_usb_probe(struct usb_interface *intf, const struct peak_usb_adapter *peak_usb_adapter = NULL; int i, err = -ENOMEM; - usb_dev = interface_to_usbdev(intf); - /* get corresponding PCAN-USB adapter */ for (i = 0; i < ARRAY_SIZE(peak_usb_adapters_list); i++) if (peak_usb_adapters_list[i]->device_id == usb_id_product) { @@ -920,7 +918,7 @@ static int peak_usb_probe(struct usb_interface *intf, if (!peak_usb_adapter) { /* should never come except device_id bad usage in this file */ pr_err("%s: didn't find device id. 0x%x in devices list\n", - PCAN_USB_DRIVER_NAME, usb_dev->descriptor.idProduct); + PCAN_USB_DRIVER_NAME, usb_id_product); return -ENODEV; } From 5cda3ee5138e91ac369ed9d0b55eab0dab077686 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sun, 4 Jun 2017 14:03:42 +0200 Subject: [PATCH 0665/1065] can: gs_usb: fix memory leak in gs_cmd_reset() This patch adds the missing kfree() in gs_cmd_reset() to free the memory that is not used anymore after usb_control_msg(). Cc: linux-stable Cc: Maximilian Schneider Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/gs_usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index eecee7f8dfb7..afcc1312dbaf 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -265,6 +265,8 @@ static int gs_cmd_reset(struct gs_usb *gsusb, struct gs_can *gsdev) sizeof(*dm), 1000); + kfree(dm); + return rc; } From 74b7b490886852582d986a33443c2ffa50970169 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 6 Jun 2017 13:53:16 +0200 Subject: [PATCH 0666/1065] can: af_can: namespace support: fix lockdep splat: properly initialize spin_lock This patch uses spin_lock_init() instead of __SPIN_LOCK_UNLOCKED() to initialize the per namespace net->can.can_rcvlists_lock lock to fix this lockdep warning: | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 0 PID: 186 Comm: candump Not tainted 4.12.0-rc3+ #47 | Hardware name: Marvell Kirkwood (Flattened Device Tree) | [] (unwind_backtrace) from [] (show_stack+0x18/0x1c) | [] (show_stack) from [] (register_lock_class+0x1e4/0x55c) | [] (register_lock_class) from [] (__lock_acquire+0x148/0x1990) | [] (__lock_acquire) from [] (lock_acquire+0x174/0x210) | [] (lock_acquire) from [] (_raw_spin_lock+0x50/0x88) | [] (_raw_spin_lock) from [] (can_rx_register+0x94/0x15c [can]) | [] (can_rx_register [can]) from [] (raw_enable_filters+0x60/0xc0 [can_raw]) | [] (raw_enable_filters [can_raw]) from [] (raw_enable_allfilters+0x2c/0xa0 [can_raw]) | [] (raw_enable_allfilters [can_raw]) from [] (raw_bind+0xb0/0x250 [can_raw]) | [] (raw_bind [can_raw]) from [] (SyS_bind+0x70/0xac) | [] (SyS_bind) from [] (ret_fast_syscall+0x0/0x1c) Cc: Mario Kicherer Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- net/can/af_can.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/can/af_can.c b/net/can/af_can.c index b6406fe33c76..88edac0f3e36 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -872,8 +872,7 @@ static int can_notifier(struct notifier_block *nb, unsigned long msg, static int can_pernet_init(struct net *net) { - net->can.can_rcvlists_lock = - __SPIN_LOCK_UNLOCKED(net->can.can_rcvlists_lock); + spin_lock_init(&net->can.can_rcvlists_lock); net->can.can_rx_alldev_list = kzalloc(sizeof(struct dev_rcv_lists), GFP_KERNEL); From 97edec3a11cf6f73f2e45c3035b5ff8e4c3543dd Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Fri, 2 Jun 2017 19:37:30 +0200 Subject: [PATCH 0667/1065] can: enable CAN FD for virtual CAN devices by default CAN FD capable CAN interfaces can handle (classic) CAN 2.0 frames too. New users usually fail at their first attempt to explore CAN FD on virtual CAN interfaces due to the current CAN_MTU default. Set the MTU to CANFD_MTU by default to reduce this confusion. If someone *really* needs a 'classic CAN'-only device this can be set with the 'ip' tool with e.g. 'ip link set vcan0 mtu 16' as before. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- drivers/net/can/vcan.c | 2 +- drivers/net/can/vxcan.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c index 0eda1b308583..a8cb33264ff1 100644 --- a/drivers/net/can/vcan.c +++ b/drivers/net/can/vcan.c @@ -152,7 +152,7 @@ static const struct net_device_ops vcan_netdev_ops = { static void vcan_setup(struct net_device *dev) { dev->type = ARPHRD_CAN; - dev->mtu = CAN_MTU; + dev->mtu = CANFD_MTU; dev->hard_header_len = 0; dev->addr_len = 0; dev->tx_queue_len = 0; diff --git a/drivers/net/can/vxcan.c b/drivers/net/can/vxcan.c index 30cf2368becf..cfe889e8f172 100644 --- a/drivers/net/can/vxcan.c +++ b/drivers/net/can/vxcan.c @@ -150,7 +150,7 @@ static const struct net_device_ops vxcan_netdev_ops = { static void vxcan_setup(struct net_device *dev) { dev->type = ARPHRD_CAN; - dev->mtu = CAN_MTU; + dev->mtu = CANFD_MTU; dev->hard_header_len = 0; dev->addr_len = 0; dev->tx_queue_len = 0; From 792ef14df5c585c19b2831673a077504a09e5203 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Fri, 9 Jun 2017 08:45:58 +0000 Subject: [PATCH 0668/1065] efi: Fix boot panic because of invalid BGRT image address Maniaxx reported a kernel boot crash in the EFI code, which I emulated by using same invalid phys addr in code: BUG: unable to handle kernel paging request at ffffffffff280001 IP: efi_bgrt_init+0xfb/0x153 ... Call Trace: ? bgrt_init+0xbc/0xbc acpi_parse_bgrt+0xe/0x12 acpi_table_parse+0x89/0xb8 acpi_boot_init+0x445/0x4e2 ? acpi_parse_x2apic+0x79/0x79 ? dmi_ignore_irq0_timer_override+0x33/0x33 setup_arch+0xb63/0xc82 ? early_idt_handler_array+0x120/0x120 start_kernel+0xb7/0x443 ? early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x154/0x177 secondary_startup_64+0x9f/0x9f There is also a similar bug filed in bugzilla.kernel.org: https://bugzilla.kernel.org/show_bug.cgi?id=195633 The crash is caused by this commit: 7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code The root cause is the firmware on those machines provides invalid BGRT image addresses. In a kernel before above commit BGRT initializes late and uses ioremap() to map the image address. Ioremap validates the address, if it is not a valid physical address ioremap() just fails and returns. However in current kernel EFI BGRT initializes early and uses early_memremap() which does not validate the image address, and kernel panic happens. According to ACPI spec the BGRT image address should fall into EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf Fix this issue by validating the image address in efi_bgrt_init(). If the image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just bail out with a warning message. Reported-by: Maniaxx Signed-off-by: Dave Young Signed-off-by: Ard Biesheuvel Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- drivers/firmware/efi/efi-bgrt.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/efi/efi-bgrt.c b/drivers/firmware/efi/efi-bgrt.c index 8bf27323f7a3..b58233e4ed71 100644 --- a/drivers/firmware/efi/efi-bgrt.c +++ b/drivers/firmware/efi/efi-bgrt.c @@ -27,6 +27,26 @@ struct bmp_header { u32 size; } __packed; +static bool efi_bgrt_addr_valid(u64 addr) +{ + efi_memory_desc_t *md; + + for_each_efi_memory_desc(md) { + u64 size; + u64 end; + + if (md->type != EFI_BOOT_SERVICES_DATA) + continue; + + size = md->num_pages << EFI_PAGE_SHIFT; + end = md->phys_addr + size; + if (addr >= md->phys_addr && addr < end) + return true; + } + + return false; +} + void __init efi_bgrt_init(struct acpi_table_header *table) { void *image; @@ -36,7 +56,7 @@ void __init efi_bgrt_init(struct acpi_table_header *table) if (acpi_disabled) return; - if (!efi_enabled(EFI_BOOT)) + if (!efi_enabled(EFI_MEMMAP)) return; if (table->length < sizeof(bgrt_tab)) { @@ -65,6 +85,10 @@ void __init efi_bgrt_init(struct acpi_table_header *table) goto out; } + if (!efi_bgrt_addr_valid(bgrt->image_address)) { + pr_notice("Ignoring BGRT: invalid image address\n"); + goto out; + } image = early_memremap(bgrt->image_address, sizeof(bmp_header)); if (!image) { pr_notice("Ignoring BGRT: failed to map image header memory\n"); From f50b878fed33e360d01dcdc31a8eeb1815d033d5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 8 Jun 2017 13:55:59 -0400 Subject: [PATCH 0669/1065] USB: gadget: fix GPF in gadgetfs A NULL-pointer dereference bug in gadgetfs was uncovered by syzkaller: > kasan: GPF could be caused by NULL-ptr deref or user memory access > general protection fault: 0000 [#1] SMP KASAN > Dumping ftrace buffer: > (ftrace buffer empty) > Modules linked in: > CPU: 2 PID: 4820 Comm: syz-executor0 Not tainted 4.12.0-rc4+ #5 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 > task: ffff880039542dc0 task.stack: ffff88003bdd0000 > RIP: 0010:__list_del_entry_valid+0x7e/0x170 lib/list_debug.c:51 > RSP: 0018:ffff88003bdd6e50 EFLAGS: 00010246 > RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000010000 > RDX: 0000000000000000 RSI: ffffffff86504948 RDI: ffffffff86504950 > RBP: ffff88003bdd6e68 R08: ffff880039542dc0 R09: ffffffff8778ce00 > R10: ffff88003bdd6e68 R11: dffffc0000000000 R12: 0000000000000000 > R13: dffffc0000000000 R14: 1ffff100077badd2 R15: ffffffff864d2e40 > FS: 0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 000000002014aff9 CR3: 0000000006022000 CR4: 00000000000006e0 > Call Trace: > __list_del_entry include/linux/list.h:116 [inline] > list_del include/linux/list.h:124 [inline] > usb_gadget_unregister_driver+0x166/0x4c0 drivers/usb/gadget/udc/core.c:1387 > dev_release+0x80/0x160 drivers/usb/gadget/legacy/inode.c:1187 > __fput+0x332/0x7f0 fs/file_table.c:209 > ____fput+0x15/0x20 fs/file_table.c:245 > task_work_run+0x19b/0x270 kernel/task_work.c:116 > exit_task_work include/linux/task_work.h:21 [inline] > do_exit+0x18a3/0x2820 kernel/exit.c:878 > do_group_exit+0x149/0x420 kernel/exit.c:982 > get_signal+0x77f/0x1780 kernel/signal.c:2318 > do_signal+0xd2/0x2130 arch/x86/kernel/signal.c:808 > exit_to_usermode_loop+0x1a7/0x240 arch/x86/entry/common.c:157 > prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] > syscall_return_slowpath+0x3ba/0x410 arch/x86/entry/common.c:263 > entry_SYSCALL_64_fastpath+0xbc/0xbe > RIP: 0033:0x4461f9 > RSP: 002b:00007fdac2b1ecf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca > RAX: fffffffffffffe00 RBX: 00000000007080c8 RCX: 00000000004461f9 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000007080c8 > RBP: 00000000007080a8 R08: 0000000000000000 R09: 0000000000000000 > R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 > R13: 0000000000000000 R14: 00007fdac2b1f9c0 R15: 00007fdac2b1f700 > Code: 00 00 00 00 ad de 49 39 c4 74 6a 48 b8 00 02 00 00 00 00 ad de > 48 89 da 48 39 c3 74 74 48 c1 ea 03 48 b8 00 00 00 00 00 fc ff df <80> > 3c 02 00 0f 85 92 00 00 00 48 8b 13 48 39 f2 75 66 49 8d 7c > RIP: __list_del_entry_valid+0x7e/0x170 lib/list_debug.c:51 RSP: ffff88003bdd6e50 > ---[ end trace 30e94b1eec4831c8 ]--- > Kernel panic - not syncing: Fatal exception The bug was caused by dev_release() failing to turn off its gadget_registered flag after unregistering the gadget driver. As a result, when a later user closed the device file before writing a valid set of descriptors, dev_release() thought the gadget had been registered and tried to unregister it, even though it had not been. This led to the NULL pointer dereference. The fix is simple: turn off the flag when the gadget is unregistered. Signed-off-by: Alan Stern Reported-and-tested-by: Andrey Konovalov CC: Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index b9ca0a26cbd9..5ffd879f7886 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -1183,8 +1183,10 @@ dev_release (struct inode *inode, struct file *fd) /* closing ep0 === shutdown all */ - if (dev->gadget_registered) + if (dev->gadget_registered) { usb_gadget_unregister_driver (&gadgetfs_driver); + dev->gadget_registered = false; + } /* at this point "good" hardware has disconnected the * device from USB; the host won't see it any more. From fc5b775da468e359154795afeb27be79b509b76d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 9 Jun 2017 15:45:32 +0200 Subject: [PATCH 0670/1065] net: phy: add missing SPEED_14000 Fixes: 0d7e2d2166f6 ("IB/ipoib: add get_link_ksettings in ethtool") Signed-off-by: Joe Perches Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 7524caa0f29d..eebb0e1c70ff 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -54,6 +54,8 @@ static const char *phy_speed_to_str(int speed) return "5Gbps"; case SPEED_10000: return "10Gbps"; + case SPEED_14000: + return "14Gbps"; case SPEED_20000: return "20Gbps"; case SPEED_25000: From defbcf2decc903a28d8398aa477b6881e711e3ea Mon Sep 17 00:00:00 2001 From: Mateusz Jurczyk Date: Thu, 8 Jun 2017 11:13:36 +0200 Subject: [PATCH 0671/1065] af_unix: Add sockaddr length checks before accessing sa_family in bind and connect handlers Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() and connect() handlers of the AF_UNIX socket. Since neither syscall enforces a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing .sa_family. Signed-off-by: Mateusz Jurczyk Signed-off-by: David S. Miller --- net/unix/af_unix.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 6a7fe7660551..1a0c961f4ffe 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -999,7 +999,8 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) struct path path = { }; err = -EINVAL; - if (sunaddr->sun_family != AF_UNIX) + if (addr_len < offsetofend(struct sockaddr_un, sun_family) || + sunaddr->sun_family != AF_UNIX) goto out; if (addr_len == sizeof(short)) { @@ -1110,6 +1111,10 @@ static int unix_dgram_connect(struct socket *sock, struct sockaddr *addr, unsigned int hash; int err; + err = -EINVAL; + if (alen < offsetofend(struct sockaddr, sa_family)) + goto out; + if (addr->sa_family != AF_UNSPEC) { err = unix_mkname(sunaddr, alen, &hash); if (err < 0) From b9d39d17e4819ca2e69ad1f14acaad12240a1de5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 9 Jun 2017 08:50:49 -0700 Subject: [PATCH 0672/1065] device-dax: fix 'dax' device filesystem inode destruction crash The inode destruction path for the 'dax' device filesystem incorrectly assumes that the inode was initialized through 'alloc_dax()'. However, if someone attempts to directly mount the dax filesystem with 'mount -t dax dax mnt' that will bypass 'alloc_dax()' and the following failure signatures may occur as a result: kill_dax() must be called before final iput() WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50 RIP: 0010:dax_destroy_inode+0x48/0x50 Call Trace: destroy_inode+0x3b/0x60 evict+0x139/0x1c0 iput+0x1f9/0x2d0 dentry_unlink_inode+0xc3/0x160 __dentry_kill+0xcf/0x180 ? dput+0x37/0x3b0 dput+0x3a3/0x3b0 do_one_tree+0x36/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_anon_super+0x12/0x20 deactivate_locked_super+0x43/0x70 deactivate_super+0x4e/0x60 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC RIP: 0010:kfree+0x6d/0x290 Call Trace: dax_i_callback+0x22/0x60 ? dax_destroy_inode+0x50/0x50 rcu_process_callbacks+0x298/0x740 ida_remove called for id=0 which is not allocated. WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120 [..] Call Trace: ida_simple_remove+0x2b/0x50 ? dax_destroy_inode+0x50/0x50 dax_i_callback+0x3c/0x60 rcu_process_callbacks+0x298/0x740 Add missing initialization of the 'struct dax_device' and inode so that the destruction path does not kfree() or ida_simple_remove() uninitialized data. Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances") Reported-by: Sasha Levin Signed-off-by: Dan Williams --- drivers/dax/super.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/dax/super.c b/drivers/dax/super.c index 6ed32aac8bbe..922d0823f8ec 100644 --- a/drivers/dax/super.c +++ b/drivers/dax/super.c @@ -210,9 +210,12 @@ EXPORT_SYMBOL_GPL(kill_dax); static struct inode *dax_alloc_inode(struct super_block *sb) { struct dax_device *dax_dev; + struct inode *inode; dax_dev = kmem_cache_alloc(dax_cache, GFP_KERNEL); - return &dax_dev->inode; + inode = &dax_dev->inode; + inode->i_rdev = 0; + return inode; } static struct dax_device *to_dax_dev(struct inode *inode) @@ -227,7 +230,8 @@ static void dax_i_callback(struct rcu_head *head) kfree(dax_dev->host); dax_dev->host = NULL; - ida_simple_remove(&dax_minor_ida, MINOR(inode->i_rdev)); + if (inode->i_rdev) + ida_simple_remove(&dax_minor_ida, MINOR(inode->i_rdev)); kmem_cache_free(dax_cache, dax_dev); } @@ -423,6 +427,7 @@ static void init_once(void *_dax_dev) struct dax_device *dax_dev = _dax_dev; struct inode *inode = &dax_dev->inode; + memset(dax_dev, 0, sizeof(*dax_dev)); inode_init_once(inode); } From f186ce61bb8235d80068c390dc2aad7ca427a4c2 Mon Sep 17 00:00:00 2001 From: Krister Johansen Date: Thu, 8 Jun 2017 13:12:38 -0700 Subject: [PATCH 0673/1065] Fix an intermittent pr_emerg warning about lo becoming free. It looks like this: Message from syslogd@flamingo at Apr 26 00:45:00 ... kernel:unregister_netdevice: waiting for lo to become free. Usage count = 4 They seem to coincide with net namespace teardown. The message is emitted by netdev_wait_allrefs(). Forced a kdump in netdev_run_todo, but found that the refcount on the lo device was already 0 at the time we got to the panic. Used bcc to check the blocking in netdev_run_todo. The only places where we're off cpu there are in the rcu_barrier() and msleep() calls. That behavior is expected. The msleep time coincides with the amount of time we spend waiting for the refcount to reach zero; the rcu_barrier() wait times are not excessive. After looking through the list of callbacks that the netdevice notifiers invoke in this path, it appears that the dst_dev_event is the most interesting. The dst_ifdown path places a hold on the loopback_dev as part of releasing the dev associated with the original dst cache entry. Most of our notifier callbacks are straight-forward, but this one a) looks complex, and b) places a hold on the network interface in question. I constructed a new bcc script that watches various events in the liftime of a dst cache entry. Note that dst_ifdown will take a hold on the loopback device until the invalidated dst entry gets freed. [ __dst_free] on DST: ffff883ccabb7900 IF tap1008300eth0 invoked at 1282115677036183 __dst_free rcu_nocb_kthread kthread ret_from_fork Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dst.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/net/core/dst.c b/net/core/dst.c index 6192f11beec9..13ba4a090c41 100644 --- a/net/core/dst.c +++ b/net/core/dst.c @@ -469,6 +469,20 @@ static int dst_dev_event(struct notifier_block *this, unsigned long event, spin_lock_bh(&dst_garbage.lock); dst = dst_garbage.list; dst_garbage.list = NULL; + /* The code in dst_ifdown places a hold on the loopback device. + * If the gc entry processing is set to expire after a lengthy + * interval, this hold can cause netdev_wait_allrefs() to hang + * out and wait for a long time -- until the the loopback + * interface is released. If we're really unlucky, it'll emit + * pr_emerg messages to console too. Reset the interval here, + * so dst cleanups occur in a more timely fashion. + */ + if (dst_garbage.timer_inc > DST_GC_INC) { + dst_garbage.timer_inc = DST_GC_INC; + dst_garbage.timer_expires = DST_GC_MIN; + mod_delayed_work(system_wq, &dst_gc_work, + dst_garbage.timer_expires); + } spin_unlock_bh(&dst_garbage.lock); if (last) From ff85a1a80e00349dc7783c8dc4d6233d9a709283 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 21 May 2017 11:44:47 +0200 Subject: [PATCH 0674/1065] kconfig: Check for libncurses before menuconfig There is a check and a nice user-friendly message when the curses library is not present on the system and the user wants to do "make menuconfig". It doesn't get issued, though. Instead, we fail the build when mconf.c doesn't find the curses.h header: HOSTCC scripts/kconfig/mconf.o In file included from scripts/kconfig/mconf.c:23:0: scripts/kconfig/lxdialog/dialog.h:38:20: fatal error: curses.h: No such file or directory #include CURSES_LOC ^ compilation terminated. Make that check a prerequisite to mconf so that the user sees the error message instead: $ make menuconfig *** Unable to find the ncurses libraries or the *** required header files. *** 'make menuconfig' requires the ncurses libraries. *** *** Install ncurses (ncurses-devel) and try again. *** scripts/kconfig/Makefile:203: recipe for target 'scripts/kconfig/dochecklxdialog' failed make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1 Makefile:548: recipe for target 'menuconfig' failed make: *** [menuconfig] Error 2 Signed-off-by: Borislav Petkov Signed-off-by: Masahiro Yamada --- scripts/kconfig/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 90a091b6ae4d..eb8144643b78 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -196,7 +196,7 @@ clean-files += config.pot linux.pot # Check that we have the required ncurses stuff installed for lxdialog (menuconfig) PHONY += $(obj)/dochecklxdialog -$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog +$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/dochecklxdialog $(obj)/dochecklxdialog: $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf) From fd6720aefde06eacf17404eed2cad65c6ec103e1 Mon Sep 17 00:00:00 2001 From: Mario Molitor Date: Thu, 8 Jun 2017 22:41:02 +0200 Subject: [PATCH 0675/1065] stmmac: fix ptp header for GMAC3 hw timestamp According the CYCLON V documention only the bit 16 of snaptypesel should set. (more information see Table 17-20 (cv_5v4.pdf) : Timestamp Snapshot Dependency on Register Bits) Fixes: d2042052a0aa ("stmmac: update the PTP header file") Signed-off-by: Mario Molitor Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 ++++++++++++--- drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 3 ++- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 12236daf7bb6..d54e5d74b3fd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -546,7 +546,10 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) /* PTP v1, UDP, any kind of event packet */ config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; /* take time stamp for all event messages */ - snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + if (priv->plat->has_gmac4) + snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1; + else + snap_type_sel = PTP_TCR_SNAPTYPSEL_1; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; @@ -578,7 +581,10 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; ptp_v2 = PTP_TCR_TSVER2ENA; /* take time stamp for all event messages */ - snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + if (priv->plat->has_gmac4) + snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1; + else + snap_type_sel = PTP_TCR_SNAPTYPSEL_1; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; @@ -612,7 +618,10 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; ptp_v2 = PTP_TCR_TSVER2ENA; /* take time stamp for all event messages */ - snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + if (priv->plat->has_gmac4) + snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1; + else + snap_type_sel = PTP_TCR_SNAPTYPSEL_1; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h index 48fb72fc423c..f4b31d69f60e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h @@ -59,7 +59,8 @@ /* Enable Snapshot for Messages Relevant to Master */ #define PTP_TCR_TSMSTRENA BIT(15) /* Select PTP packets for Taking Snapshots */ -#define PTP_TCR_SNAPTYPSEL_1 GENMASK(17, 16) +#define PTP_TCR_SNAPTYPSEL_1 BIT(16) +#define PTP_GMAC4_TCR_SNAPTYPSEL_1 GENMASK(17, 16) /* Enable MAC address for PTP Frame Filtering */ #define PTP_TCR_TSENMACADDR BIT(18) From 33d4c4821323729b463e45d0b2d32f6a87dcba5b Mon Sep 17 00:00:00 2001 From: Mario Molitor Date: Thu, 8 Jun 2017 23:03:09 +0200 Subject: [PATCH 0676/1065] stmmac: fix for hw timestamp of GMAC3 unit 1.) Bugfix of function stmmac_get_tx_hwtstamp. Corrected the tx timestamp available check (same as 4.8 and older) Change printout from info syslevel to debug. 2.) Bugfix of function stmmac_get_rx_hwtstamp. Corrected the rx timestamp available check (same as 4.8 and older) Change printout from info syslevel to debug. Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4") Signed-off-by: Mario Molitor Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 11 +++++++---- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 +++++----- 2 files changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c index aa6476439aee..e0ef02f9503b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c @@ -214,13 +214,13 @@ static int dwmac4_wrback_get_tx_timestamp_status(struct dma_desc *p) { /* Context type from W/B descriptor must be zero */ if (le32_to_cpu(p->des3) & TDES3_CONTEXT_TYPE) - return -EINVAL; + return 0; /* Tx Timestamp Status is 1 so des0 and des1'll have valid values */ if (le32_to_cpu(p->des3) & TDES3_TIMESTAMP_STATUS) - return 0; + return 1; - return 1; + return 0; } static inline u64 dwmac4_get_timestamp(void *desc, u32 ats) @@ -282,7 +282,10 @@ static int dwmac4_wrback_get_rx_timestamp_status(void *desc, u32 ats) } } exit: - return ret; + if (likely(ret == 0)) + return 1; + + return 0; } static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index d54e5d74b3fd..d16d11bfc046 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -434,14 +434,14 @@ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv, return; /* check tx tstamp status */ - if (!priv->hw->desc->get_tx_timestamp_status(p)) { + if (priv->hw->desc->get_tx_timestamp_status(p)) { /* get the valid tstamp */ ns = priv->hw->desc->get_timestamp(p, priv->adv_ts); memset(&shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps)); shhwtstamp.hwtstamp = ns_to_ktime(ns); - netdev_info(priv->dev, "get valid TX hw timestamp %llu\n", ns); + netdev_dbg(priv->dev, "get valid TX hw timestamp %llu\n", ns); /* pass tstamp to stack */ skb_tstamp_tx(skb, &shhwtstamp); } @@ -468,19 +468,19 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p, return; /* Check if timestamp is available */ - if (!priv->hw->desc->get_rx_timestamp_status(p, priv->adv_ts)) { + if (priv->hw->desc->get_rx_timestamp_status(p, priv->adv_ts)) { /* For GMAC4, the valid timestamp is from CTX next desc. */ if (priv->plat->has_gmac4) ns = priv->hw->desc->get_timestamp(np, priv->adv_ts); else ns = priv->hw->desc->get_timestamp(p, priv->adv_ts); - netdev_info(priv->dev, "get valid RX hw timestamp %llu\n", ns); + netdev_dbg(priv->dev, "get valid RX hw timestamp %llu\n", ns); shhwtstamp = skb_hwtstamps(skb); memset(shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps)); shhwtstamp->hwtstamp = ns_to_ktime(ns); } else { - netdev_err(priv->dev, "cannot get RX hw timestamp\n"); + netdev_dbg(priv->dev, "cannot get RX hw timestamp\n"); } } From a0897d5f2c2d884d20840c82aea517e8a7801441 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 6 Jun 2017 13:05:03 -0700 Subject: [PATCH 0677/1065] Input: synaptics-rmi4 - register F03 port as pass-through serio The 5th generation Thinkpad X1 Carbons use Synaptics touchpads accessible over SMBus/RMI, combined with ALPS or Elantech trackpoint devices instead of classic IBM/Lenovo trackpoints. Unfortunately there is no way for ALPS driver to detect whether it is dealing with touchpad + trackpoint combination or just a trackpoint, so we end up with a "phantom" dualpoint ALPS device in addition to real touchpad and trackpoint. Given that we do not have any special advanced handling for ALPS or Elantech trackpoints (unlike IBM trackpoints that have separate driver and a host of options) we are better off keeping the trackpoints in PS/2 emulation mode. We achieve that by setting serio type to SERIO_PS_PSTHRU, which will limit number of protocols psmouse driver will try. In addition to getting rid of the "phantom" touchpads, this will also speed up probing of F03 pass-through port. Reported-by: Damjan Georgievski Suggested-by: Benjamin Tissoires Acked-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_f03.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c index 77dad045a468..ad71a5e768dc 100644 --- a/drivers/input/rmi4/rmi_f03.c +++ b/drivers/input/rmi4/rmi_f03.c @@ -146,7 +146,7 @@ static int rmi_f03_register_pt(struct f03_data *f03) if (!serio) return -ENOMEM; - serio->id.type = SERIO_8042; + serio->id.type = SERIO_PS_PSTHRU; serio->write = rmi_f03_pt_write; serio->port_data = f03; From 773fc8f6e8d63ec9d840588e161cbb73a01cfc45 Mon Sep 17 00:00:00 2001 From: "ashwanth@codeaurora.org" Date: Fri, 9 Jun 2017 14:24:58 +0530 Subject: [PATCH 0678/1065] net: rps: send out pending IPI's on CPU hotplug IPI's from the victim cpu are not handled in dev_cpu_callback. So these pending IPI's would be sent to the remote cpu only when NET_RX is scheduled on the victim cpu and since this trigger is unpredictable it would result in packet latencies on the remote cpu. This patch add support to send the pending ipi's of victim cpu. Signed-off-by: Ashwanth Goli Signed-off-by: David S. Miller --- net/core/dev.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 4c15466305c3..54bb8d99d26a 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4949,6 +4949,19 @@ __sum16 __skb_gro_checksum_complete(struct sk_buff *skb) } EXPORT_SYMBOL(__skb_gro_checksum_complete); +static void net_rps_send_ipi(struct softnet_data *remsd) +{ +#ifdef CONFIG_RPS + while (remsd) { + struct softnet_data *next = remsd->rps_ipi_next; + + if (cpu_online(remsd->cpu)) + smp_call_function_single_async(remsd->cpu, &remsd->csd); + remsd = next; + } +#endif +} + /* * net_rps_action_and_irq_enable sends any pending IPI's for rps. * Note: called with local irq disabled, but exits with local irq enabled. @@ -4964,14 +4977,7 @@ static void net_rps_action_and_irq_enable(struct softnet_data *sd) local_irq_enable(); /* Send pending IPI's to kick RPS processing on remote cpus. */ - while (remsd) { - struct softnet_data *next = remsd->rps_ipi_next; - - if (cpu_online(remsd->cpu)) - smp_call_function_single_async(remsd->cpu, - &remsd->csd); - remsd = next; - } + net_rps_send_ipi(remsd); } else #endif local_irq_enable(); @@ -8197,7 +8203,7 @@ static int dev_cpu_dead(unsigned int oldcpu) struct sk_buff **list_skb; struct sk_buff *skb; unsigned int cpu; - struct softnet_data *sd, *oldsd; + struct softnet_data *sd, *oldsd, *remsd; local_irq_disable(); cpu = smp_processor_id(); @@ -8238,6 +8244,13 @@ static int dev_cpu_dead(unsigned int oldcpu) raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_enable(); +#ifdef CONFIG_RPS + remsd = oldsd->rps_ipi_list; + oldsd->rps_ipi_list = NULL; +#endif + /* send out pending IPI's on offline CPU */ + net_rps_send_ipi(remsd); + /* Process offline CPU's input_pkt_queue */ while ((skb = __skb_dequeue(&oldsd->process_queue))) { netif_rx_ni(skb); From c7a61cba71fd151cc7d9ebe53a090e0e61eeebf3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 9 Jun 2017 21:33:09 +0200 Subject: [PATCH 0679/1065] mac80211: free netdev on dev_alloc_name() error The change to remove free_netdev() from ieee80211_if_free() erroneously didn't add the necessary free_netdev() for when ieee80211_if_free() is called directly in one place, rather than as the priv_destructor. Add the missing call. Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/mac80211/iface.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 915d7e1b4545..f5f50150ba1c 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1816,6 +1816,7 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, ret = dev_alloc_name(ndev, ndev->name); if (ret < 0) { ieee80211_if_free(ndev); + free_netdev(ndev); return ret; } From 286b92f43c0d0ae2c29a61769b66219fe5ae6701 Mon Sep 17 00:00:00 2001 From: Su Yue Date: Wed, 24 May 2017 09:31:32 +0800 Subject: [PATCH 0680/1065] btrfs: tree-log.c: Wrong printk information about namelen In verify_dir_item, it wants to printk name_len of dir_item but printk data_len acutally. Fix it by calling btrfs_dir_name_len instead of btrfs_dir_data_len. Signed-off-by: Su Yue Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Chris Mason --- fs/btrfs/dir-item.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c index 60a750678a82..c24d615e3d7f 100644 --- a/fs/btrfs/dir-item.c +++ b/fs/btrfs/dir-item.c @@ -468,7 +468,7 @@ int verify_dir_item(struct btrfs_fs_info *fs_info, if (btrfs_dir_name_len(leaf, dir_item) > namelen) { btrfs_crit(fs_info, "invalid dir item name len: %u", - (unsigned)btrfs_dir_data_len(leaf, dir_item)); + (unsigned)btrfs_dir_name_len(leaf, dir_item)); return 1; } From 452e62b71fbbefe2646fad3a968371a026936c6d Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Fri, 26 May 2017 17:44:23 -0600 Subject: [PATCH 0681/1065] Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io Before this, we use 'filled' mode here, ie. if all range has been filled with EXTENT_DEFRAG bits, get to clear it, but if the defrag range joins the adjacent delalloc range, then we'll have EXTENT_DEFRAG bits in extent_state until releasing this inode's pages, and that prevents extent_data from being freed. This clears the bit if any was found within the ordered extent. Signed-off-by: Liu Bo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 3fc3e10594a4..ef3c98c527c1 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2952,7 +2952,7 @@ static int btrfs_finish_ordered_io(struct btrfs_ordered_extent *ordered_extent) ret = test_range_bit(io_tree, ordered_extent->file_offset, ordered_extent->file_offset + ordered_extent->len - 1, - EXTENT_DEFRAG, 1, cached_state); + EXTENT_DEFRAG, 0, cached_state); if (ret) { u64 last_snapshot = btrfs_root_last_snapshot(&root->root_item); if (0 && last_snapshot >= BTRFS_I(inode)->generation) From 70e7af244f24c94604ef6eca32ad297632018583 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Fri, 2 Jun 2017 01:20:01 -0700 Subject: [PATCH 0682/1065] Btrfs: fix delalloc accounting leak caused by u32 overflow btrfs_calc_trans_metadata_size() does an unsigned 32-bit multiplication, which can overflow if num_items >= 4 GB / (nodesize * BTRFS_MAX_LEVEL * 2). For a nodesize of 16kB, this overflow happens at 16k items. Usually, num_items is a small constant passed to btrfs_start_transaction(), but we also use btrfs_calc_trans_metadata_size() for metadata reservations for extent items in btrfs_delalloc_{reserve,release}_metadata(). In drop_outstanding_extents(), num_items is calculated as inode->reserved_extents - inode->outstanding_extents. The difference between these two counters is usually small, but if many delalloc extents are reserved and then the outstanding extents are merged in btrfs_merge_extent_hook(), the difference can become large enough to overflow in btrfs_calc_trans_metadata_size(). The overflow manifests itself as a leak of a multiple of 4 GB in delalloc_block_rsv and the metadata bytes_may_use counter. This in turn can cause early ENOSPC errors. Additionally, these WARN_ONs in extent-tree.c will be hit when unmounting: WARN_ON(fs_info->delalloc_block_rsv.size > 0); WARN_ON(fs_info->delalloc_block_rsv.reserved > 0); WARN_ON(space_info->bytes_pinned > 0 || space_info->bytes_reserved > 0 || space_info->bytes_may_use > 0); Fix it by casting nodesize to a u64 so that btrfs_calc_trans_metadata_size() does a full 64-bit multiplication. While we're here, do the same in btrfs_calc_trunc_metadata_size(); this can't overflow with any existing uses, but it's better to be safe here than have another hard-to-debug problem later on. Cc: stable@vger.kernel.org Signed-off-by: Omar Sandoval Reviewed-by: David Sterba Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 1e82516fe2d8..43a8c42cdf07 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2564,7 +2564,7 @@ u64 btrfs_csum_bytes_to_leaves(struct btrfs_fs_info *fs_info, u64 csum_bytes); static inline u64 btrfs_calc_trans_metadata_size(struct btrfs_fs_info *fs_info, unsigned num_items) { - return fs_info->nodesize * BTRFS_MAX_LEVEL * 2 * num_items; + return (u64)fs_info->nodesize * BTRFS_MAX_LEVEL * 2 * num_items; } /* @@ -2574,7 +2574,7 @@ static inline u64 btrfs_calc_trans_metadata_size(struct btrfs_fs_info *fs_info, static inline u64 btrfs_calc_trunc_metadata_size(struct btrfs_fs_info *fs_info, unsigned num_items) { - return fs_info->nodesize * BTRFS_MAX_LEVEL * num_items; + return (u64)fs_info->nodesize * BTRFS_MAX_LEVEL * num_items; } int btrfs_should_throttle_delayed_refs(struct btrfs_trans_handle *trans, From 8785d84d002c2ce0f68fbcd6c2c86be859802c7e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 8 Jun 2017 02:42:03 -0400 Subject: [PATCH 0683/1065] ufs: restore proper tail allocation Cc: stable@vger.kernel.org Signed-off-by: Al Viro --- fs/ufs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index 7e41aee7b69a..feb5f280db09 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -284,7 +284,7 @@ ufs_inode_getfrag(struct inode *inode, unsigned index, goal += uspi->s_fpb; } tmp = ufs_new_fragments(inode, p, ufs_blknum(new_fragment), - goal, uspi->s_fpb, err, locked_page); + goal, nfrags, err, locked_page); if (!tmp) { *err = -ENOSPC; From 414cf7186dbec29bd946c138d6b5c09da5955a08 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 8 Jun 2017 18:15:18 -0400 Subject: [PATCH 0684/1065] fix ufs_isblockset() Cc: stable@vger.kernel.org Signed-off-by: Al Viro --- fs/ufs/util.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/ufs/util.h b/fs/ufs/util.h index b7fbf53dbc81..398019fb1448 100644 --- a/fs/ufs/util.h +++ b/fs/ufs/util.h @@ -473,15 +473,19 @@ static inline unsigned _ubh_find_last_zero_bit_( static inline int _ubh_isblockset_(struct ufs_sb_private_info * uspi, struct ufs_buffer_head * ubh, unsigned begin, unsigned block) { + u8 mask; switch (uspi->s_fpb) { case 8: return (*ubh_get_addr (ubh, begin + block) == 0xff); case 4: - return (*ubh_get_addr (ubh, begin + (block >> 1)) == (0x0f << ((block & 0x01) << 2))); + mask = 0x0f << ((block & 0x01) << 2); + return (*ubh_get_addr (ubh, begin + (block >> 1)) & mask) == mask; case 2: - return (*ubh_get_addr (ubh, begin + (block >> 2)) == (0x03 << ((block & 0x03) << 1))); + mask = 0x03 << ((block & 0x03) << 1); + return (*ubh_get_addr (ubh, begin + (block >> 2)) & mask) == mask; case 1: - return (*ubh_get_addr (ubh, begin + (block >> 3)) == (0x01 << (block & 0x07))); + mask = 0x01 << (block & 0x07); + return (*ubh_get_addr (ubh, begin + (block >> 3)) & mask) == mask; } return 0; } From eb315d2ae614493fd1ebb026c75a80573d84f7ad Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 8 Jun 2017 21:15:03 -0400 Subject: [PATCH 0685/1065] ufs: restore maintaining ->i_blocks Cc: stable@vger.kernel.org Signed-off-by: Al Viro --- fs/stat.c | 1 + fs/ufs/balloc.c | 26 +++++++++++++++++++++++++- 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/fs/stat.c b/fs/stat.c index f494b182c7c7..c35610845ab1 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -672,6 +672,7 @@ void __inode_add_bytes(struct inode *inode, loff_t bytes) inode->i_bytes -= 512; } } +EXPORT_SYMBOL(__inode_add_bytes); void inode_add_bytes(struct inode *inode, loff_t bytes) { diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c index a0376a2c1c29..d642cc0a8271 100644 --- a/fs/ufs/balloc.c +++ b/fs/ufs/balloc.c @@ -82,7 +82,8 @@ void ufs_free_fragments(struct inode *inode, u64 fragment, unsigned count) ufs_error (sb, "ufs_free_fragments", "bit already cleared for fragment %u", i); } - + + inode_sub_bytes(inode, count << uspi->s_fshift); fs32_add(sb, &ucg->cg_cs.cs_nffree, count); uspi->cs_total.cs_nffree += count; fs32_add(sb, &UFS_SB(sb)->fs_cs(cgno).cs_nffree, count); @@ -184,6 +185,7 @@ do_more: ufs_error(sb, "ufs_free_blocks", "freeing free fragment"); } ubh_setblock(UCPI_UBH(ucpi), ucpi->c_freeoff, blkno); + inode_sub_bytes(inode, uspi->s_fpb << uspi->s_fshift); if ((UFS_SB(sb)->s_flags & UFS_CG_MASK) == UFS_CG_44BSD) ufs_clusteracct (sb, ucpi, blkno, 1); @@ -494,6 +496,20 @@ u64 ufs_new_fragments(struct inode *inode, void *p, u64 fragment, return 0; } +static bool try_add_frags(struct inode *inode, unsigned frags) +{ + unsigned size = frags * i_blocksize(inode); + spin_lock(&inode->i_lock); + __inode_add_bytes(inode, size); + if (unlikely((u32)inode->i_blocks != inode->i_blocks)) { + __inode_sub_bytes(inode, size); + spin_unlock(&inode->i_lock); + return false; + } + spin_unlock(&inode->i_lock); + return true; +} + static u64 ufs_add_fragments(struct inode *inode, u64 fragment, unsigned oldcount, unsigned newcount) { @@ -530,6 +546,9 @@ static u64 ufs_add_fragments(struct inode *inode, u64 fragment, for (i = oldcount; i < newcount; i++) if (ubh_isclr (UCPI_UBH(ucpi), ucpi->c_freeoff, fragno + i)) return 0; + + if (!try_add_frags(inode, count)) + return 0; /* * Block can be extended */ @@ -647,6 +666,7 @@ cg_found: ubh_setbit (UCPI_UBH(ucpi), ucpi->c_freeoff, goal + i); i = uspi->s_fpb - count; + inode_sub_bytes(inode, i << uspi->s_fshift); fs32_add(sb, &ucg->cg_cs.cs_nffree, i); uspi->cs_total.cs_nffree += i; fs32_add(sb, &UFS_SB(sb)->fs_cs(cgno).cs_nffree, i); @@ -657,6 +677,8 @@ cg_found: result = ufs_bitmap_search (sb, ucpi, goal, allocsize); if (result == INVBLOCK) return 0; + if (!try_add_frags(inode, count)) + return 0; for (i = 0; i < count; i++) ubh_clrbit (UCPI_UBH(ucpi), ucpi->c_freeoff, result + i); @@ -716,6 +738,8 @@ norot: return INVBLOCK; ucpi->c_rotor = result; gotit: + if (!try_add_frags(inode, uspi->s_fpb)) + return 0; blkno = ufs_fragstoblks(result); ubh_clrblock (UCPI_UBH(ucpi), ucpi->c_freeoff, blkno); if ((UFS_SB(sb)->s_flags & UFS_CG_MASK) == UFS_CG_44BSD) From 6b0d144fa758869bdd652c50aa41aaf601232550 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 8 Jun 2017 21:15:45 -0400 Subject: [PATCH 0686/1065] ufs: set correct ->s_maxsize Cc: stable@vger.kernel.org Signed-off-by: Al Viro --- fs/ufs/super.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/fs/ufs/super.c b/fs/ufs/super.c index 131b2b77c818..d9aa2627c9df 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -746,6 +746,23 @@ static void ufs_put_super(struct super_block *sb) return; } +static u64 ufs_max_bytes(struct super_block *sb) +{ + struct ufs_sb_private_info *uspi = UFS_SB(sb)->s_uspi; + int bits = uspi->s_apbshift; + u64 res; + + if (bits > 21) + res = ~0ULL; + else + res = UFS_NDADDR + (1LL << bits) + (1LL << (2*bits)) + + (1LL << (3*bits)); + + if (res >= (MAX_LFS_FILESIZE >> uspi->s_bshift)) + return MAX_LFS_FILESIZE; + return res << uspi->s_bshift; +} + static int ufs_fill_super(struct super_block *sb, void *data, int silent) { struct ufs_sb_info * sbi; @@ -1212,6 +1229,7 @@ magic_found: "fast symlink size (%u)\n", uspi->s_maxsymlinklen); uspi->s_maxsymlinklen = maxsymlen; } + sb->s_maxbytes = ufs_max_bytes(sb); sb->s_max_links = UFS_LINK_MAX; inode = ufs_iget(sb, UFS_ROOTINO); From 940ef1a0ed939c2ca029fca715e25e7778ce1e34 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 8 Jun 2017 23:27:12 -0400 Subject: [PATCH 0687/1065] ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments() ... and it really needs splitting into "new" and "extend" cases, but that's for later Cc: stable@vger.kernel.org Signed-off-by: Al Viro --- fs/ufs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index feb5f280db09..966cced0f88e 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -235,7 +235,8 @@ ufs_extend_tail(struct inode *inode, u64 writes_to, p = ufs_get_direct_data_ptr(uspi, ufsi, block); tmp = ufs_new_fragments(inode, p, lastfrag, ufs_data_ptr_to_cpu(sb, p), - new_size, err, locked_page); + new_size - (lastfrag & uspi->s_fpbmask), err, + locked_page); return tmp != 0; } From 006351ac8ead0d4a67dd3845e3ceffe650a23212 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 8 Jun 2017 23:28:53 -0400 Subject: [PATCH 0688/1065] ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path Cc: stable@vger.kernel.org Signed-off-by: Al Viro --- fs/ufs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index 966cced0f88e..9bf10285c628 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -403,7 +403,9 @@ static int ufs_getfrag_block(struct inode *inode, sector_t fragment, struct buff if (!create) { phys64 = ufs_frag_map(inode, offsets, depth); - goto out; + if (phys64) + map_bh(bh_result, sb, phys64 + frag); + return 0; } /* This code entered only while writing ....? */ From babef37dccbaa49249a22bae9150686815d7be71 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Jun 2017 16:20:34 -0400 Subject: [PATCH 0689/1065] excessive checks in ufs_write_failed() and ufs_evict_inode() As it is, short copy in write() to append-only file will fail to truncate the excessive allocated blocks. As the matter of fact, all checks in ufs_truncate_blocks() are either redundant or wrong for that caller. As for the only other caller (ufs_evict_inode()), we only need the file type checks there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro --- fs/ufs/inode.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index 9bf10285c628..34f11cf0900a 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -844,7 +844,9 @@ void ufs_evict_inode(struct inode * inode) truncate_inode_pages_final(&inode->i_data); if (want_delete) { inode->i_size = 0; - if (inode->i_blocks) + if (inode->i_blocks && + (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || + S_ISLNK(inode->i_mode))) ufs_truncate_blocks(inode); } @@ -1103,7 +1105,7 @@ out: return err; } -static void __ufs_truncate_blocks(struct inode *inode) +static void ufs_truncate_blocks(struct inode *inode) { struct ufs_inode_info *ufsi = UFS_I(inode); struct super_block *sb = inode->i_sb; @@ -1186,7 +1188,7 @@ static int ufs_truncate(struct inode *inode, loff_t size) truncate_setsize(inode, size); - __ufs_truncate_blocks(inode); + ufs_truncate_blocks(inode); inode->i_mtime = inode->i_ctime = current_time(inode); mark_inode_dirty(inode); out: @@ -1194,16 +1196,6 @@ out: return err; } -static void ufs_truncate_blocks(struct inode *inode) -{ - if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || - S_ISLNK(inode->i_mode))) - return; - if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) - return; - __ufs_truncate_blocks(inode); -} - int ufs_setattr(struct dentry *dentry, struct iattr *attr) { struct inode *inode = d_inode(dentry); From 67a70017fa0a152657bc7e337e69bb9c9f5549bf Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 10 Jun 2017 12:01:50 -0400 Subject: [PATCH 0690/1065] ufs: we need to sync inode before freeing it Signed-off-by: Al Viro --- fs/ufs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index 34f11cf0900a..da553ffec85b 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -848,6 +848,7 @@ void ufs_evict_inode(struct inode * inode) (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))) ufs_truncate_blocks(inode); + ufs_update_inode(inode, inode_needs_sync(inode)); } invalidate_inode_buffers(inode); From 92f85f05caa51d844af6ea14ffbc7a786446a644 Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Fri, 9 Jun 2017 17:17:01 +0300 Subject: [PATCH 0691/1065] bnx2x: Allow vfs to disable txvlan offload VF clients are configured as enforced, meaning firmware is validating the correctness of their ethertype/vid during transmission. Once txvlan is disabled, VF would start getting SKBs for transmission here vlan is on the payload - but it'll pass the packet's ethertype instead of the vid, leading to firmware declaring it as malicious. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 5f49334dcad5..f619c4cac51f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3883,15 +3883,26 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) /* when transmitting in a vf, start bd must hold the ethertype * for fw to enforce it */ + u16 vlan_tci = 0; #ifndef BNX2X_STOP_ON_ERROR - if (IS_VF(bp)) + if (IS_VF(bp)) { #endif - tx_start_bd->vlan_or_ethertype = - cpu_to_le16(ntohs(eth->h_proto)); + /* Still need to consider inband vlan for enforced */ + if (__vlan_get_tag(skb, &vlan_tci)) { + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(ntohs(eth->h_proto)); + } else { + tx_start_bd->bd_flags.as_bitfield |= + (X_ETH_INBAND_VLAN << + ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT); + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(vlan_tci); + } #ifndef BNX2X_STOP_ON_ERROR - else + } else { /* used by FW for packet accounting */ tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + } #endif } From 3523882229b903e967de05665b871dab87c5df0f Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Fri, 9 Jun 2017 17:17:02 +0300 Subject: [PATCH 0692/1065] bnx2x: Don't post statistics to malicious VFs Once firmware indicates that a given VF is malicious and until that VF passes an FLR all bets are off - PF can't know anything is happening to the VF [since VF can't communicate anything to its PF]. But PF is currently still periodically asking device to collect statistics for the VF which might in turn fill logs by IOMMU blocking memory access done by the VF's PCI function [in the case VF has unmapped its buffers]. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 13 ++++++++++++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 1 + 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 870ea001a720..9ca994d0bab6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -901,6 +901,8 @@ static void bnx2x_vf_flr(struct bnx2x *bp, struct bnx2x_virtf *vf) /* release VF resources */ bnx2x_vf_free_resc(bp, vf); + vf->malicious = false; + /* re-open the mailbox */ bnx2x_vf_enable_mbx(bp, vf->abs_vfid); return; @@ -1822,9 +1824,11 @@ get_vf: vf->abs_vfid, qidx); bnx2x_vf_handle_rss_update_eqe(bp, vf); case EVENT_RING_OPCODE_VF_FLR: - case EVENT_RING_OPCODE_MALICIOUS_VF: /* Do nothing for now */ return 0; + case EVENT_RING_OPCODE_MALICIOUS_VF: + vf->malicious = true; + return 0; } return 0; @@ -1905,6 +1909,13 @@ void bnx2x_iov_adjust_stats_req(struct bnx2x *bp) continue; } + if (vf->malicious) { + DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS), + "vf %d malicious so no stats for it\n", + vf->abs_vfid); + continue; + } + DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS), "add addresses for vf %d\n", vf->abs_vfid); for_each_vfq(vf, j) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 888d0b6632e8..53466f6cebab 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -141,6 +141,7 @@ struct bnx2x_virtf { #define VF_RESET 3 /* VF FLR'd, pending cleanup */ bool flr_clnup_stage; /* true during flr cleanup */ + bool malicious; /* true if FW indicated so, until FLR */ /* dma */ dma_addr_t fw_stat_map; From d8dba51de5dfb55225b169653bbd7379ac0d0c63 Mon Sep 17 00:00:00 2001 From: Philippe Reynes Date: Fri, 9 Jun 2017 23:50:57 +0200 Subject: [PATCH 0693/1065] net: aquantia: atlantic: remove declaration of hw_atl_utils_hw_set_power This function is not defined, so no need to declare it. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h index b8e3d88f0879..a66aee51ab5b 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h @@ -193,9 +193,6 @@ int hw_atl_utils_hw_get_regs(struct aq_hw_s *self, struct aq_hw_caps_s *aq_hw_caps, u32 *regs_buff); -int hw_atl_utils_hw_get_settings(struct aq_hw_s *self, - struct ethtool_cmd *cmd); - int hw_atl_utils_hw_set_power(struct aq_hw_s *self, unsigned int power_state); From 9b3dc0a17d7388c4fb83736ca45253a93e994ce4 Mon Sep 17 00:00:00 2001 From: Dominik Heidler Date: Fri, 9 Jun 2017 16:29:47 +0200 Subject: [PATCH 0694/1065] l2tp: cast l2tp traffic counter to unsigned This fixes a counter problem on 32bit systems: When the rx_bytes counter reached 2 GiB, it jumpd to (2^64 Bytes - 2GiB) Bytes. rtnl_link_stats64 has __u64 type and atomic_long_read returns atomic_long_t which is signed. Due to the conversation we get an incorrect value on 32bit systems if the MSB of the atomic_long_t value is set. CC: Tom Parkin Fixes: 7b7c0719cd7a ("l2tp: avoid deadlock in l2tp stats update") Signed-off-by: Dominik Heidler Signed-off-by: David S. Miller --- net/l2tp/l2tp_eth.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c index f7c54ece3733..4de2ec94b08c 100644 --- a/net/l2tp/l2tp_eth.c +++ b/net/l2tp/l2tp_eth.c @@ -114,12 +114,13 @@ static void l2tp_eth_get_stats64(struct net_device *dev, { struct l2tp_eth *priv = netdev_priv(dev); - stats->tx_bytes = atomic_long_read(&priv->tx_bytes); - stats->tx_packets = atomic_long_read(&priv->tx_packets); - stats->tx_dropped = atomic_long_read(&priv->tx_dropped); - stats->rx_bytes = atomic_long_read(&priv->rx_bytes); - stats->rx_packets = atomic_long_read(&priv->rx_packets); - stats->rx_errors = atomic_long_read(&priv->rx_errors); + stats->tx_bytes = (unsigned long) atomic_long_read(&priv->tx_bytes); + stats->tx_packets = (unsigned long) atomic_long_read(&priv->tx_packets); + stats->tx_dropped = (unsigned long) atomic_long_read(&priv->tx_dropped); + stats->rx_bytes = (unsigned long) atomic_long_read(&priv->rx_bytes); + stats->rx_packets = (unsigned long) atomic_long_read(&priv->rx_packets); + stats->rx_errors = (unsigned long) atomic_long_read(&priv->rx_errors); + } static const struct net_device_ops l2tp_eth_netdev_ops = { From bf292f1b2c813f1d6ac49b04bd1a9863d8314266 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 9 Jun 2017 22:37:22 -0300 Subject: [PATCH 0695/1065] net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272 Commit 2b30842b23b9 ("net: fec: Clear and enable MIB counters on imx51") introduced fec_enet_clear_ethtool_stats(), but missed to add a stub for the CONFIG_M5272=y case, causing build failure for the m5272c3_defconfig. Add the missing empty stub to fix the build failure. Reported-by: Paul Gortmaker Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index f7c8649fd28f..2205e5b32a10 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2361,6 +2361,10 @@ static int fec_enet_get_sset_count(struct net_device *dev, int sset) static inline void fec_enet_update_ethtool_stats(struct net_device *dev) { } + +static inline void fec_enet_clear_ethtool_stats(struct net_device *dev) +{ +} #endif /* !defined(CONFIG_M5272) */ /* ITR clock source is enet system clock (clk_ahb). From 581409dacc9176b0de1f6c4ca8d66e13aa8e1b29 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sat, 10 Jun 2017 14:48:14 +0800 Subject: [PATCH 0696/1065] sctp: disable BH in sctp_for_each_endpoint Now sctp holds read_lock when foreach sctp_ep_hashtable without disabling BH. If CPU schedules to another thread A at this moment, the thread A may be trying to hold the write_lock with disabling BH. As BH is disabled and CPU cannot schedule back to the thread holding the read_lock, while the thread A keeps waiting for the read_lock. A dead lock would be triggered by this. This patch is to fix this dead lock by calling read_lock_bh instead to disable BH when holding the read_lock in sctp_for_each_endpoint. Fixes: 626d16f50f39 ("sctp: export some apis or variables for sctp_diag and reuse some for proc") Reported-by: Xiumei Mu Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/socket.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index f16c8d97b7f3..30aa0a529215 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4622,13 +4622,13 @@ int sctp_for_each_endpoint(int (*cb)(struct sctp_endpoint *, void *), for (head = sctp_ep_hashtable; hash < sctp_ep_hashsize; hash++, head++) { - read_lock(&head->lock); + read_lock_bh(&head->lock); sctp_for_each_hentry(epb, &head->chain) { err = cb(sctp_ep(epb), p); if (err) break; } - read_unlock(&head->lock); + read_unlock_bh(&head->lock); } return err; From 5aa32f53ab93175442dffbd95a231d0798cab4d1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 10 Jun 2017 16:44:28 -0400 Subject: [PATCH 0697/1065] Revert "net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272" This reverts commit bf292f1b2c813f1d6ac49b04bd1a9863d8314266. It belongs in 'net-next' not 'net'. Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 2205e5b32a10..f7c8649fd28f 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2361,10 +2361,6 @@ static int fec_enet_get_sset_count(struct net_device *dev, int sset) static inline void fec_enet_update_ethtool_stats(struct net_device *dev) { } - -static inline void fec_enet_clear_ethtool_stats(struct net_device *dev) -{ -} #endif /* !defined(CONFIG_M5272) */ /* ITR clock source is enet system clock (clk_ahb). From f146e872eb12ebbe92d8e583b2637e0741440db3 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Sat, 10 Jun 2017 16:49:39 +0800 Subject: [PATCH 0698/1065] net: caif: Fix a sleep-in-atomic bug in cfpkt_create_pfx The kernel may sleep under a rcu read lock in cfpkt_create_pfx, and the function call path is: cfcnfg_linkup_rsp (acquire the lock by rcu_read_lock) cfctrl_linkdown_req cfpkt_create cfpkt_create_pfx alloc_skb(GFP_KERNEL) --> may sleep cfserl_receive (acquire the lock by rcu_read_lock) cfpkt_split cfpkt_create_pfx alloc_skb(GFP_KERNEL) --> may sleep There is "in_interrupt" in cfpkt_create_pfx to decide use "GFP_KERNEL" or "GFP_ATOMIC". In this situation, "GFP_KERNEL" is used because the function is called under a rcu read lock, instead in interrupt. To fix it, only "GFP_ATOMIC" is used in cfpkt_create_pfx. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- net/caif/cfpkt_skbuff.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/net/caif/cfpkt_skbuff.c b/net/caif/cfpkt_skbuff.c index 59ce1fcc220c..71b6ab240dea 100644 --- a/net/caif/cfpkt_skbuff.c +++ b/net/caif/cfpkt_skbuff.c @@ -81,11 +81,7 @@ static struct cfpkt *cfpkt_create_pfx(u16 len, u16 pfx) { struct sk_buff *skb; - if (likely(in_interrupt())) - skb = alloc_skb(len + pfx, GFP_ATOMIC); - else - skb = alloc_skb(len + pfx, GFP_KERNEL); - + skb = alloc_skb(len + pfx, GFP_ATOMIC); if (unlikely(skb == NULL)) return NULL; From 343eba69c6968190d8654b857aea952fed9a6749 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Sat, 10 Jun 2017 17:03:35 +0800 Subject: [PATCH 0699/1065] net: tipc: Fix a sleep-in-atomic bug in tipc_msg_reverse The kernel may sleep under a rcu read lock in tipc_msg_reverse, and the function call path is: tipc_l2_rcv_msg (acquire the lock by rcu_read_lock) tipc_rcv tipc_sk_rcv tipc_msg_reverse pskb_expand_head(GFP_KERNEL) --> may sleep tipc_node_broadcast tipc_node_xmit_skb tipc_node_xmit tipc_sk_rcv tipc_msg_reverse pskb_expand_head(GFP_KERNEL) --> may sleep To fix it, "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- net/tipc/msg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tipc/msg.c b/net/tipc/msg.c index 312ef7de57d7..ab3087687a32 100644 --- a/net/tipc/msg.c +++ b/net/tipc/msg.c @@ -508,7 +508,7 @@ bool tipc_msg_reverse(u32 own_node, struct sk_buff **skb, int err) } if (skb_cloned(_skb) && - pskb_expand_head(_skb, BUF_HEADROOM, BUF_TAILROOM, GFP_KERNEL)) + pskb_expand_head(_skb, BUF_HEADROOM, BUF_TAILROOM, GFP_ATOMIC)) goto exit; /* Now reverse the concerned fields */ From 56b8aae959499508090b2d2db6961ed905f38164 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Sat, 10 Jun 2017 23:18:21 +0200 Subject: [PATCH 0700/1065] net: mvpp2: remove mvpp2_bm_cookie_{build,pool_get} This commit removes the useless remove mvpp2_bm_cookie_{build,pool_get} functions. All what mvpp2_bm_cookie_build() was doing is compute a 32-bit value by concatenating the pool number and the CPU number... only to get the pool number re-extracted by mvpp2_bm_cookie_pool_get() later on. Instead, just get the pool number directly from RX descriptor status, and pass it to mvpp2_pool_refill() and mvpp2_rx_refill(). This has the added benefit of dropping a smp_processor_id() call in a migration-enabled context, which is wrong, and is the original motivation for making this change. Fixes: 3f518509dedc9 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2.c | 47 +++++++++------------------- 1 file changed, 14 insertions(+), 33 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index 70bca2a6fb02..5841e53614c6 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -3920,12 +3920,6 @@ static inline u32 mvpp2_bm_cookie_pool_set(u32 cookie, int pool) return bm; } -/* Get pool number from a BM cookie */ -static inline int mvpp2_bm_cookie_pool_get(unsigned long cookie) -{ - return (cookie >> MVPP2_BM_COOKIE_POOL_OFFS) & 0xFF; -} - /* Release buffer to BM */ static inline void mvpp2_bm_pool_put(struct mvpp2_port *port, int pool, dma_addr_t buf_dma_addr, @@ -3961,12 +3955,10 @@ static inline void mvpp2_bm_pool_put(struct mvpp2_port *port, int pool, } /* Refill BM pool */ -static void mvpp2_pool_refill(struct mvpp2_port *port, u32 bm, +static void mvpp2_pool_refill(struct mvpp2_port *port, int pool, dma_addr_t dma_addr, phys_addr_t phys_addr) { - int pool = mvpp2_bm_cookie_pool_get(bm); - mvpp2_bm_pool_put(port, pool, dma_addr, phys_addr); } @@ -4513,21 +4505,6 @@ static void mvpp2_rxq_offset_set(struct mvpp2_port *port, mvpp2_write(port->priv, MVPP2_RXQ_CONFIG_REG(prxq), val); } -/* Obtain BM cookie information from descriptor */ -static u32 mvpp2_bm_cookie_build(struct mvpp2_port *port, - struct mvpp2_rx_desc *rx_desc) -{ - int cpu = smp_processor_id(); - int pool; - - pool = (mvpp2_rxdesc_status_get(port, rx_desc) & - MVPP2_RXD_BM_POOL_ID_MASK) >> - MVPP2_RXD_BM_POOL_ID_OFFS; - - return ((pool & 0xFF) << MVPP2_BM_COOKIE_POOL_OFFS) | - ((cpu & 0xFF) << MVPP2_BM_COOKIE_CPU_OFFS); -} - /* Tx descriptors helper methods */ /* Get pointer to next Tx descriptor to be processed (send) by HW */ @@ -4978,9 +4955,13 @@ static void mvpp2_rxq_drop_pkts(struct mvpp2_port *port, for (i = 0; i < rx_received; i++) { struct mvpp2_rx_desc *rx_desc = mvpp2_rxq_next_desc_get(rxq); - u32 bm = mvpp2_bm_cookie_build(port, rx_desc); + u32 status = mvpp2_rxdesc_status_get(port, rx_desc); + int pool; - mvpp2_pool_refill(port, bm, + pool = (status & MVPP2_RXD_BM_POOL_ID_MASK) >> + MVPP2_RXD_BM_POOL_ID_OFFS; + + mvpp2_pool_refill(port, pool, mvpp2_rxdesc_dma_addr_get(port, rx_desc), mvpp2_rxdesc_cookie_get(port, rx_desc)); } @@ -5418,7 +5399,7 @@ static void mvpp2_rx_csum(struct mvpp2_port *port, u32 status, /* Reuse skb if possible, or allocate a new skb and add it to BM pool */ static int mvpp2_rx_refill(struct mvpp2_port *port, - struct mvpp2_bm_pool *bm_pool, u32 bm) + struct mvpp2_bm_pool *bm_pool, int pool) { dma_addr_t dma_addr; phys_addr_t phys_addr; @@ -5430,7 +5411,7 @@ static int mvpp2_rx_refill(struct mvpp2_port *port, if (!buf) return -ENOMEM; - mvpp2_pool_refill(port, bm, dma_addr, phys_addr); + mvpp2_pool_refill(port, pool, dma_addr, phys_addr); return 0; } @@ -5488,7 +5469,7 @@ static int mvpp2_rx(struct mvpp2_port *port, int rx_todo, unsigned int frag_size; dma_addr_t dma_addr; phys_addr_t phys_addr; - u32 bm, rx_status; + u32 rx_status; int pool, rx_bytes, err; void *data; @@ -5500,8 +5481,8 @@ static int mvpp2_rx(struct mvpp2_port *port, int rx_todo, phys_addr = mvpp2_rxdesc_cookie_get(port, rx_desc); data = (void *)phys_to_virt(phys_addr); - bm = mvpp2_bm_cookie_build(port, rx_desc); - pool = mvpp2_bm_cookie_pool_get(bm); + pool = (rx_status & MVPP2_RXD_BM_POOL_ID_MASK) >> + MVPP2_RXD_BM_POOL_ID_OFFS; bm_pool = &port->priv->bm_pools[pool]; /* In case of an error, release the requested buffer pointer @@ -5514,7 +5495,7 @@ err_drop_frame: dev->stats.rx_errors++; mvpp2_rx_error(port, rx_desc); /* Return the buffer to the pool */ - mvpp2_pool_refill(port, bm, dma_addr, phys_addr); + mvpp2_pool_refill(port, pool, dma_addr, phys_addr); continue; } @@ -5529,7 +5510,7 @@ err_drop_frame: goto err_drop_frame; } - err = mvpp2_rx_refill(port, bm_pool, bm); + err = mvpp2_rx_refill(port, bm_pool, pool); if (err) { netdev_err(port->dev, "failed to refill BM pools\n"); goto err_drop_frame; From a704bb5c052bbd6b77c6530a2e83cef42486e335 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Sat, 10 Jun 2017 23:18:22 +0200 Subject: [PATCH 0701/1065] net: mvpp2: use {get, put}_cpu() instead of smp_processor_id() smp_processor_id() should not be used in migration-enabled contexts. We originally thought it was OK in the specific situation of this driver, but it was wrong, and calling smp_processor_id() in a migration-enabled context prints a big fat warning when CONFIG_DEBUG_PREEMPT=y. Therefore, this commit replaces the smp_processor_id() in migration-enabled contexts by the appropriate get_cpu/put_cpu sections. Reported-by: Marc Zyngier Fixes: a786841df72e ("net: mvpp2: handle register mapping and access for PPv2.2") Signed-off-by: Thomas Petazzoni Tested-by: Marc Zyngier Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index 5841e53614c6..33c901622ed5 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -3719,7 +3719,7 @@ static void mvpp2_bm_bufs_get_addrs(struct device *dev, struct mvpp2 *priv, dma_addr_t *dma_addr, phys_addr_t *phys_addr) { - int cpu = smp_processor_id(); + int cpu = get_cpu(); *dma_addr = mvpp2_percpu_read(priv, cpu, MVPP2_BM_PHY_ALLOC_REG(bm_pool->id)); @@ -3740,6 +3740,8 @@ static void mvpp2_bm_bufs_get_addrs(struct device *dev, struct mvpp2 *priv, if (sizeof(phys_addr_t) == 8) *phys_addr |= (u64)phys_addr_highbits << 32; } + + put_cpu(); } /* Free all buffers from the pool */ @@ -3925,7 +3927,7 @@ static inline void mvpp2_bm_pool_put(struct mvpp2_port *port, int pool, dma_addr_t buf_dma_addr, phys_addr_t buf_phys_addr) { - int cpu = smp_processor_id(); + int cpu = get_cpu(); if (port->priv->hw_version == MVPP22) { u32 val = 0; @@ -3952,6 +3954,8 @@ static inline void mvpp2_bm_pool_put(struct mvpp2_port *port, int pool, MVPP2_BM_VIRT_RLS_REG, buf_phys_addr); mvpp2_percpu_write(port->priv, cpu, MVPP2_BM_PHY_RLS_REG(pool), buf_dma_addr); + + put_cpu(); } /* Refill BM pool */ @@ -4732,7 +4736,7 @@ static void mvpp2_txp_max_tx_size_set(struct mvpp2_port *port) static void mvpp2_rx_pkts_coal_set(struct mvpp2_port *port, struct mvpp2_rx_queue *rxq) { - int cpu = smp_processor_id(); + int cpu = get_cpu(); if (rxq->pkts_coal > MVPP2_OCCUPIED_THRESH_MASK) rxq->pkts_coal = MVPP2_OCCUPIED_THRESH_MASK; @@ -4740,6 +4744,8 @@ static void mvpp2_rx_pkts_coal_set(struct mvpp2_port *port, mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_NUM_REG, rxq->id); mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_THRESH_REG, rxq->pkts_coal); + + put_cpu(); } static u32 mvpp2_usec_to_cycles(u32 usec, unsigned long clk_hz) @@ -4920,7 +4926,7 @@ static int mvpp2_rxq_init(struct mvpp2_port *port, mvpp2_write(port->priv, MVPP2_RXQ_STATUS_REG(rxq->id), 0); /* Set Rx descriptors queue starting address - indirect access */ - cpu = smp_processor_id(); + cpu = get_cpu(); mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_NUM_REG, rxq->id); if (port->priv->hw_version == MVPP21) rxq_dma = rxq->descs_dma; @@ -4929,6 +4935,7 @@ static int mvpp2_rxq_init(struct mvpp2_port *port, mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_DESC_ADDR_REG, rxq_dma); mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_DESC_SIZE_REG, rxq->size); mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_INDEX_REG, 0); + put_cpu(); /* Set Offset */ mvpp2_rxq_offset_set(port, rxq->id, NET_SKB_PAD); @@ -4991,10 +4998,11 @@ static void mvpp2_rxq_deinit(struct mvpp2_port *port, * free descriptor number */ mvpp2_write(port->priv, MVPP2_RXQ_STATUS_REG(rxq->id), 0); - cpu = smp_processor_id(); + cpu = get_cpu(); mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_NUM_REG, rxq->id); mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_DESC_ADDR_REG, 0); mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_DESC_SIZE_REG, 0); + put_cpu(); } /* Create and initialize a Tx queue */ @@ -5017,7 +5025,7 @@ static int mvpp2_txq_init(struct mvpp2_port *port, txq->last_desc = txq->size - 1; /* Set Tx descriptors queue starting address - indirect access */ - cpu = smp_processor_id(); + cpu = get_cpu(); mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_NUM_REG, txq->id); mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_DESC_ADDR_REG, txq->descs_dma); @@ -5042,6 +5050,7 @@ static int mvpp2_txq_init(struct mvpp2_port *port, mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_PREF_BUF_REG, MVPP2_PREF_BUF_PTR(desc) | MVPP2_PREF_BUF_SIZE_16 | MVPP2_PREF_BUF_THRESH(desc_per_txq / 2)); + put_cpu(); /* WRR / EJP configuration - indirect access */ tx_port_num = mvpp2_egress_port(port); @@ -5112,10 +5121,11 @@ static void mvpp2_txq_deinit(struct mvpp2_port *port, mvpp2_write(port->priv, MVPP2_TXQ_SCHED_TOKEN_CNTR_REG(txq->id), 0); /* Set Tx descriptors queue starting address and size */ - cpu = smp_processor_id(); + cpu = get_cpu(); mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_NUM_REG, txq->id); mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_DESC_ADDR_REG, 0); mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_DESC_SIZE_REG, 0); + put_cpu(); } /* Cleanup Tx ports */ @@ -5125,7 +5135,7 @@ static void mvpp2_txq_clean(struct mvpp2_port *port, struct mvpp2_tx_queue *txq) int delay, pending, cpu; u32 val; - cpu = smp_processor_id(); + cpu = get_cpu(); mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_NUM_REG, txq->id); val = mvpp2_percpu_read(port->priv, cpu, MVPP2_TXQ_PREF_BUF_REG); val |= MVPP2_TXQ_DRAIN_EN_MASK; @@ -5152,6 +5162,7 @@ static void mvpp2_txq_clean(struct mvpp2_port *port, struct mvpp2_tx_queue *txq) val &= ~MVPP2_TXQ_DRAIN_EN_MASK; mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_PREF_BUF_REG, val); + put_cpu(); for_each_present_cpu(cpu) { txq_pcpu = per_cpu_ptr(txq->pcpu, cpu); From 4d801cca0bb7011699c2d29f0139902dcfb3482d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 2 May 2017 20:44:16 -0700 Subject: [PATCH 0702/1065] hexagon: Use raw_copy_to_user Commit ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") replaced __copy_to_user_hexagon() with raw_copy_to_user(), but did not catch all callers, resulting in the following build error. arch/hexagon/mm/uaccess.c: In function '__clear_user_hexagon': arch/hexagon/mm/uaccess.c:40:3: error: implicit declaration of function '__copy_to_user_hexagon' Fixes: ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") Cc: Al Viro Acked-by: Al Viro Acked-by: Richard Kuo Signed-off-by: Guenter Roeck --- arch/hexagon/mm/uaccess.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/hexagon/mm/uaccess.c b/arch/hexagon/mm/uaccess.c index ec90afdb3ad0..c599eb126c9e 100644 --- a/arch/hexagon/mm/uaccess.c +++ b/arch/hexagon/mm/uaccess.c @@ -37,15 +37,14 @@ __kernel_size_t __clear_user_hexagon(void __user *dest, unsigned long count) long uncleared; while (count > PAGE_SIZE) { - uncleared = __copy_to_user_hexagon(dest, &empty_zero_page, - PAGE_SIZE); + uncleared = raw_copy_to_user(dest, &empty_zero_page, PAGE_SIZE); if (uncleared) return count - (PAGE_SIZE - uncleared); count -= PAGE_SIZE; dest += PAGE_SIZE; } if (count) - count = __copy_to_user_hexagon(dest, &empty_zero_page, count); + count = raw_copy_to_user(dest, &empty_zero_page, count); return count; } From 9bc1f09f6fa76fdf31eb7d6a4a4df43574725f93 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Thu, 8 Jun 2017 20:13:40 -0700 Subject: [PATCH 0703/1065] KVM: async_pf: avoid async pf injection when in guest mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit INFO: task gnome-terminal-:1734 blocked for more than 120 seconds. Not tainted 4.12.0-rc4+ #8 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. gnome-terminal- D 0 1734 1015 0x00000000 Call Trace: __schedule+0x3cd/0xb30 schedule+0x40/0x90 kvm_async_pf_task_wait+0x1cc/0x270 ? __vfs_read+0x37/0x150 ? prepare_to_swait+0x22/0x70 do_async_page_fault+0x77/0xb0 ? do_async_page_fault+0x77/0xb0 async_page_fault+0x28/0x30 This is triggered by running both win7 and win2016 on L1 KVM simultaneously, and then gives stress to memory on L1, I can observed this hang on L1 when at least ~70% swap area is occupied on L0. This is due to async pf was injected to L2 which should be injected to L1, L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host actually), and L1 guest starts accumulating tasks stuck in D state in kvm_async_pf_task_wait() since missing PAGE_READY async_pfs. This patch fixes the hang by doing async pf when executing L1 guest. Cc: Paolo Bonzini Cc: Radim Krčmář Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu.c | 7 +++++-- arch/x86/kvm/mmu.h | 1 + arch/x86/kvm/x86.c | 3 +-- 3 files changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 5d3376f67794..cb8225969255 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3698,12 +3698,15 @@ static int kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn) return kvm_setup_async_pf(vcpu, gva, kvm_vcpu_gfn_to_hva(vcpu, gfn), &arch); } -static bool can_do_async_pf(struct kvm_vcpu *vcpu) +bool kvm_can_do_async_pf(struct kvm_vcpu *vcpu) { if (unlikely(!lapic_in_kernel(vcpu) || kvm_event_needs_reinjection(vcpu))) return false; + if (is_guest_mode(vcpu)) + return false; + return kvm_x86_ops->interrupt_allowed(vcpu); } @@ -3719,7 +3722,7 @@ static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn, if (!async) return false; /* *pfn has correct page already */ - if (!prefault && can_do_async_pf(vcpu)) { + if (!prefault && kvm_can_do_async_pf(vcpu)) { trace_kvm_try_async_get_page(gva, gfn); if (kvm_find_async_pf_gfn(vcpu, gfn)) { trace_kvm_async_pf_doublefault(gva, gfn); diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index 27975807cc64..330bf3a811fb 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -76,6 +76,7 @@ int handle_mmio_page_fault(struct kvm_vcpu *vcpu, u64 addr, bool direct); void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu); void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly, bool accessed_dirty); +bool kvm_can_do_async_pf(struct kvm_vcpu *vcpu); static inline unsigned int kvm_mmu_available_pages(struct kvm *kvm) { diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index a2cd0997343c..87d3cb901935 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -8607,8 +8607,7 @@ bool kvm_arch_can_inject_async_page_present(struct kvm_vcpu *vcpu) if (!(vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED)) return true; else - return !kvm_event_needs_reinjection(vcpu) && - kvm_x86_ops->interrupt_allowed(vcpu); + return kvm_can_do_async_pf(vcpu); } void kvm_arch_start_assignment(struct kvm *kvm) From f67abed585efe251edda52dc9690020d6441890f Mon Sep 17 00:00:00 2001 From: Marcin Nowakowski Date: Fri, 9 Jun 2017 10:00:29 +0200 Subject: [PATCH 0704/1065] sched/fair: Fix typo in printk message 'schedstats' kernel parameter should be set to enable/disable, so correct the printk hint saying that it should be set to 'enable' rather than 'enabled' to enable scheduler tracepoints. Signed-off-by: Marcin Nowakowski Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1496995229-31245-1-git-send-email-marcin.nowakowski@imgtec.com Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index d71109321841..c77e4b1d51c0 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -3563,7 +3563,7 @@ static inline void check_schedstat_required(void) trace_sched_stat_runtime_enabled()) { printk_deferred_once("Scheduler tracepoints stat_sleep, stat_iowait, " "stat_blocked and stat_runtime require the " - "kernel parameter schedstats=enabled or " + "kernel parameter schedstats=enable or " "kernel.sched_schedstats=1\n"); } #endif From 252d2a4117bc181b287eeddf848863788da733ae Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Fri, 9 Jun 2017 11:49:15 -0700 Subject: [PATCH 0705/1065] sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off() idle_task_exit() can be called with IRQs on x86 on and therefore should use switch_mm(), not switch_mm_irqs_off(). This doesn't seem to cause any problems right now, but it will confuse my upcoming TLB flush changes. Nonetheless, I think it should be backported because it's trivial. There won't be any meaningful performance impact because idle_task_exit() is only used when offlining a CPU. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org Fixes: f98db6013c55 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") Link: http://lkml.kernel.org/r/ca3d1a9fa93a0b49f5a8ff729eda3640fb6abdf9.1497034141.git.luto@kernel.org Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 803c3bc274c4..326d4f88e2b1 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5605,7 +5605,7 @@ void idle_task_exit(void) BUG_ON(cpu_online(smp_processor_id())); if (mm != &init_mm) { - switch_mm_irqs_off(mm, &init_mm, current); + switch_mm(mm, &init_mm, current); finish_arch_post_lock_switch(); } mmdrop(mm); From 57f35c93a2072c1f66ab1728a77a9ee4bc33bf42 Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Thu, 25 May 2017 16:46:14 +0300 Subject: [PATCH 0706/1065] net/mlx5: Fix create vport flow table flow Send vport number to the create flow table inner method instead of ignoring the vport argument and sending always 0. Fixes: b3ba51498bdd ('net/mlx5: Refactor create flow table method to accept underlay QP') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 0e487e8ca634..8f5125ccd8d4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -862,7 +862,7 @@ struct mlx5_flow_table *mlx5_create_vport_flow_table(struct mlx5_flow_namespace ft_attr.level = level; ft_attr.prio = prio; - return __mlx5_create_flow_table(ns, &ft_attr, FS_FT_OP_MOD_NORMAL, 0); + return __mlx5_create_flow_table(ns, &ft_attr, FS_FT_OP_MOD_NORMAL, vport); } struct mlx5_flow_table* From 3fece5d676939f42f434c63dfe1bd42d7d94e6f0 Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Sun, 9 Apr 2017 17:19:37 +0300 Subject: [PATCH 0707/1065] net/mlx5: Continue health polling until it is explicitly stopped The issue is that when we get an assert we will stop polling the health and thus we cant enter error state when we have a real health issue. Fixes: fd76ee4da55a ('net/mlx5_core: Fix internal error detection conditions') Signed-off-by: Mohamad Haj Yahia Reviewed-by: Daniel Jurgens Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/health.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c index 44f59b1d6f0f..f27f84ffbc85 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/health.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c @@ -275,10 +275,8 @@ static void poll_health(unsigned long data) struct mlx5_core_health *health = &dev->priv.health; u32 count; - if (dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) { - mod_timer(&health->timer, get_next_poll_jiffies()); - return; - } + if (dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) + goto out; count = ioread32be(health->health_counter); if (count == health->prev) @@ -290,8 +288,6 @@ static void poll_health(unsigned long data) if (health->miss_counter == MAX_MISSES) { dev_err(&dev->pdev->dev, "device's health compromised - reached miss count\n"); print_health_info(dev); - } else { - mod_timer(&health->timer, get_next_poll_jiffies()); } if (in_fatal(dev) && !health->sick) { @@ -305,6 +301,9 @@ static void poll_health(unsigned long data) "new health works are not permitted at this stage\n"); spin_unlock(&health->wq_lock); } + +out: + mod_timer(&health->timer, get_next_poll_jiffies()); } void mlx5_start_health_poll(struct mlx5_core_dev *dev) From f729860a177d097ac44321fb2f7d927a0c54c5a3 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Mon, 8 May 2017 11:46:50 -0500 Subject: [PATCH 0708/1065] net/mlx5: Remove several module events out of ethtool stats Remove the following module event counters out of ethtool stats. The reason for removing these event counters is that these events do not occur without techinician's intervention. module_pwr_budget_exd module_long_range module_no_eeprom module_enforce_part module_unknown_id module_unknown_status module_plug Fixes: bedb7c909c19 ("net/mlx5e: Add port module event counters to ethtool stats") Signed-off-by: Huy Nguyen Reviewed by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h index 53e4992d6511..f81c3aa60b46 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h @@ -417,20 +417,13 @@ struct mlx5e_stats { }; static const struct counter_desc mlx5e_pme_status_desc[] = { - { "module_plug", 0 }, { "module_unplug", 8 }, }; static const struct counter_desc mlx5e_pme_error_desc[] = { - { "module_pwr_budget_exd", 0 }, /* power budget exceed */ - { "module_long_range", 8 }, /* long range for non MLNX cable */ - { "module_bus_stuck", 16 }, /* bus stuck (I2C or data shorted) */ - { "module_no_eeprom", 24 }, /* no eeprom/retry time out */ - { "module_enforce_part", 32 }, /* enforce part number list */ - { "module_unknown_id", 40 }, /* unknown identifier */ - { "module_high_temp", 48 }, /* high temperature */ + { "module_bus_stuck", 16 }, /* bus stuck (I2C or data shorted) */ + { "module_high_temp", 48 }, /* high temperature */ { "module_bad_shorted", 56 }, /* bad or shorted cable/module */ - { "module_unknown_status", 64 }, }; #endif /* __MLX5_EN_STATS_H__ */ From c3164d2fc48fd4fa0477ab658b644559c3fe9073 Mon Sep 17 00:00:00 2001 From: Tal Gilboa Date: Mon, 15 May 2017 14:13:16 +0300 Subject: [PATCH 0709/1065] net/mlx5e: Added BW check for DIM decision mechanism DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for changing the channel interrupt moderation values in order to reduce CPU overhead for all traffic types. Until now only interrupt and packet rate were sampled. We found a scenario on which we get a false indication since a change in DIM caused more aggregation and reduced packet rate while increasing BW. We now regard a change as succesfull iff: current_BW > (prev_BW + threshold) or current_BW ~= prev_BW and current_PR > (prev_PR + threshold) or current_BW ~= prev_BW and current_PR ~= prev_PR and current_IR < (prev_IR - threshold) Where BW = Bandwidth, PR = Packet rate and IR = Interrupt rate Improvements (ConnectX-4Lx 25GbE, single RX queue, LRO off) -------------------------------------------------- packet size | before[Mb/s] | after[Mb/s] | gain | 2B | 343.4 | 359.4 | 4.5% | 16B | 2739.7 | 2814.8 | 2.7% | 64B | 9739 | 10185.3 | 4.5% | Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Tal Gilboa Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 + .../ethernet/mellanox/mlx5/core/en_rx_am.c | 37 ++++++++++--------- 2 files changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 2fd044b23875..429da21a583d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -458,12 +458,14 @@ struct mlx5e_mpw_info { struct mlx5e_rx_am_stats { int ppms; /* packets per msec */ + int bpms; /* bytes per msec */ int epms; /* events per msec */ }; struct mlx5e_rx_am_sample { ktime_t time; unsigned int pkt_ctr; + unsigned int byte_ctr; u16 event_ctr; }; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c index 02dd3a95ed8f..54cdda957f9a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c @@ -183,28 +183,27 @@ static void mlx5e_am_exit_parking(struct mlx5e_rx_am *am) mlx5e_am_step(am); } +#define IS_SIGNIFICANT_DIFF(val, ref) \ + (((100 * abs((val) - (ref))) / (ref)) > 10) /* more than 10% difference */ + static int mlx5e_am_stats_compare(struct mlx5e_rx_am_stats *curr, struct mlx5e_rx_am_stats *prev) { - int diff; - - if (!prev->ppms) - return curr->ppms ? MLX5E_AM_STATS_BETTER : + if (!prev->bpms) + return curr->bpms ? MLX5E_AM_STATS_BETTER : MLX5E_AM_STATS_SAME; - diff = curr->ppms - prev->ppms; - if (((100 * abs(diff)) / prev->ppms) > 10) /* more than 10% diff */ - return (diff > 0) ? MLX5E_AM_STATS_BETTER : - MLX5E_AM_STATS_WORSE; + if (IS_SIGNIFICANT_DIFF(curr->bpms, prev->bpms)) + return (curr->bpms > prev->bpms) ? MLX5E_AM_STATS_BETTER : + MLX5E_AM_STATS_WORSE; - if (!prev->epms) - return curr->epms ? MLX5E_AM_STATS_WORSE : - MLX5E_AM_STATS_SAME; + if (IS_SIGNIFICANT_DIFF(curr->ppms, prev->ppms)) + return (curr->ppms > prev->ppms) ? MLX5E_AM_STATS_BETTER : + MLX5E_AM_STATS_WORSE; - diff = curr->epms - prev->epms; - if (((100 * abs(diff)) / prev->epms) > 10) /* more than 10% diff */ - return (diff < 0) ? MLX5E_AM_STATS_BETTER : - MLX5E_AM_STATS_WORSE; + if (IS_SIGNIFICANT_DIFF(curr->epms, prev->epms)) + return (curr->epms < prev->epms) ? MLX5E_AM_STATS_BETTER : + MLX5E_AM_STATS_WORSE; return MLX5E_AM_STATS_SAME; } @@ -266,6 +265,7 @@ static void mlx5e_am_sample(struct mlx5e_rq *rq, { s->time = ktime_get(); s->pkt_ctr = rq->stats.packets; + s->byte_ctr = rq->stats.bytes; s->event_ctr = rq->cq.event_ctr; } @@ -278,12 +278,15 @@ static void mlx5e_am_calc_stats(struct mlx5e_rx_am_sample *start, /* u32 holds up to 71 minutes, should be enough */ u32 delta_us = ktime_us_delta(end->time, start->time); unsigned int npkts = end->pkt_ctr - start->pkt_ctr; + unsigned int nbytes = end->byte_ctr - start->byte_ctr; if (!delta_us) return; - curr_stats->ppms = (npkts * USEC_PER_MSEC) / delta_us; - curr_stats->epms = (MLX5E_AM_NEVENTS * USEC_PER_MSEC) / delta_us; + curr_stats->ppms = DIV_ROUND_UP(npkts * USEC_PER_MSEC, delta_us); + curr_stats->bpms = DIV_ROUND_UP(nbytes * USEC_PER_MSEC, delta_us); + curr_stats->epms = DIV_ROUND_UP(MLX5E_AM_NEVENTS * USEC_PER_MSEC, + delta_us); } void mlx5e_rx_am_work(struct work_struct *work) From 53acd76ce571e3b71f9205f2d49ab285a9f1aad8 Mon Sep 17 00:00:00 2001 From: Tal Gilboa Date: Mon, 29 May 2017 17:02:55 +0300 Subject: [PATCH 0710/1065] net/mlx5e: Fix wrong indications in DIM due to counter wraparound DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for changing the channel interrupt moderation values in order to reduce CPU overhead for all traffic types. Each iteration of the algorithm, DIM calculates the difference in throughput, packet rate and interrupt rate from last iteration in order to make a decision. DIM relies on counters for each metric. When these counters get to their type's max value they wraparound. In this case the delta between 'end' and 'start' samples is negative and when translated to unsigned integers - very high. This results in a false indication to the algorithm and might result in a wrong decision. The fix calculates the 'distance' between 'end' and 'start' samples in a cyclic way around the relevant type's max value. It can also be viewed as an absolute value around the type's max value instead of around 0. Testing show higher stability in DIM profile selection and no wraparound issues. Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Tal Gilboa Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 8 ++++---- drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c | 10 +++++++--- 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 429da21a583d..944fc1742464 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -463,10 +463,10 @@ struct mlx5e_rx_am_stats { }; struct mlx5e_rx_am_sample { - ktime_t time; - unsigned int pkt_ctr; - unsigned int byte_ctr; - u16 event_ctr; + ktime_t time; + u32 pkt_ctr; + u32 byte_ctr; + u16 event_ctr; }; struct mlx5e_rx_am { /* Adaptive Moderation */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c index 54cdda957f9a..acf32fe952cd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c @@ -270,6 +270,8 @@ static void mlx5e_am_sample(struct mlx5e_rq *rq, } #define MLX5E_AM_NEVENTS 64 +#define BITS_PER_TYPE(type) (sizeof(type) * BITS_PER_BYTE) +#define BIT_GAP(bits, end, start) ((((end) - (start)) + BIT_ULL(bits)) & (BIT_ULL(bits) - 1)) static void mlx5e_am_calc_stats(struct mlx5e_rx_am_sample *start, struct mlx5e_rx_am_sample *end, @@ -277,8 +279,9 @@ static void mlx5e_am_calc_stats(struct mlx5e_rx_am_sample *start, { /* u32 holds up to 71 minutes, should be enough */ u32 delta_us = ktime_us_delta(end->time, start->time); - unsigned int npkts = end->pkt_ctr - start->pkt_ctr; - unsigned int nbytes = end->byte_ctr - start->byte_ctr; + u32 npkts = BIT_GAP(BITS_PER_TYPE(u32), end->pkt_ctr, start->pkt_ctr); + u32 nbytes = BIT_GAP(BITS_PER_TYPE(u32), end->byte_ctr, + start->byte_ctr); if (!delta_us) return; @@ -311,7 +314,8 @@ void mlx5e_rx_am(struct mlx5e_rq *rq) switch (am->state) { case MLX5E_AM_MEASURE_IN_PROGRESS: - nevents = rq->cq.event_ctr - am->start_sample.event_ctr; + nevents = BIT_GAP(BITS_PER_TYPE(u16), rq->cq.event_ctr, + am->start_sample.event_ctr); if (nevents < MLX5E_AM_NEVENTS) break; mlx5e_am_sample(rq, &end_sample); From 91828bd89940e8145f91751a015bc11bc486aad0 Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Sun, 28 May 2017 14:47:56 +0300 Subject: [PATCH 0711/1065] net/mlx5: Enable 4K UAR only when page size is bigger than 4K When the page size isn't bigger than 4K, there is no added value of enabling 4K UAR feature in the Firmware. Modified the condition of enabling the 4K UAR accordingly. Fixes: f502d834950a ("net/mlx5: Activate support for 4K UARs") Signed-off-by: Majd Dibbiny Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index af945edfee19..4f577a5abf88 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -537,8 +537,10 @@ static int handle_hca_cap(struct mlx5_core_dev *dev) /* disable cmdif checksum */ MLX5_SET(cmd_hca_cap, set_hca_cap, cmdif_checksum, 0); - /* If the HCA supports 4K UARs use it */ - if (MLX5_CAP_GEN_MAX(dev, uar_4k)) + /* Enable 4K UAR only when HCA supports it and page size is bigger + * than 4K. + */ + if (MLX5_CAP_GEN_MAX(dev, uar_4k) && PAGE_SIZE > 4096) MLX5_SET(cmd_hca_cap, set_hca_cap, uar_4k, 1); MLX5_SET(cmd_hca_cap, set_hca_cap, log_uar_page_sz, PAGE_SHIFT - 12); From 103a07d4278203d6299798cd74cdc4d209801cac Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 4 Jun 2017 15:28:23 +0200 Subject: [PATCH 0712/1065] iio: adc: meson-saradc: fix potential crash in meson_sar_adc_clear_fifo meson_sar_adc_clear_fifo passes a 0 as value-pointer to regmap_read(). In case of the meson-saradc driver this ends up in regmap_mmio_read(), where the value-pointer is de-referenced unconditionally to assign the value which was read. Fix this by passing an actual pointer, even though all we want to do is to discard the value. As a side-effect this fixes a sparse warning ("Using plain integer as NULL pointer") as reported by Paolo Cretaro. Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Reported-by: Paolo Cretaro Signed-off-by: Martin Blumenstingl Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/meson_saradc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index dd4190b50df6..6066bbfc42fe 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -468,13 +468,13 @@ static void meson_sar_adc_unlock(struct iio_dev *indio_dev) static void meson_sar_adc_clear_fifo(struct iio_dev *indio_dev) { struct meson_sar_adc_priv *priv = iio_priv(indio_dev); - int count; + unsigned int count, tmp; for (count = 0; count < MESON_SAR_ADC_MAX_FIFO_SIZE; count++) { if (!meson_sar_adc_get_fifo_count(indio_dev)) break; - regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, 0); + regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &tmp); } } From a77c1aafcc906f657d1a0890c1d898be9ee1d5c9 Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Sun, 11 Jun 2017 15:42:43 +0300 Subject: [PATCH 0713/1065] net: ena: fix rare uncompleted admin command false alarm The current flow to detect admin completion is: while (command_not_completed) { if (timeout) error check_for_completion() sleep() } So in case the sleep took more than the timeout (in case the thread/workqueue was not scheduled due to higher priority task or prolonged VMexit), the driver can detect a stall even if the completion is present. The fix changes the order of this function to first check for completion and only after that check if the timeout expired. Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_com.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c index 08d11cede9c9..e1c2fab6292f 100644 --- a/drivers/net/ethernet/amazon/ena/ena_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_com.c @@ -508,15 +508,20 @@ static int ena_com_comp_status_to_errno(u8 comp_status) static int ena_com_wait_and_process_admin_cq_polling(struct ena_comp_ctx *comp_ctx, struct ena_com_admin_queue *admin_queue) { - unsigned long flags; - u32 start_time; + unsigned long flags, timeout; int ret; - start_time = ((u32)jiffies_to_usecs(jiffies)); + timeout = jiffies + ADMIN_CMD_TIMEOUT_US; - while (comp_ctx->status == ENA_CMD_SUBMITTED) { - if ((((u32)jiffies_to_usecs(jiffies)) - start_time) > - ADMIN_CMD_TIMEOUT_US) { + while (1) { + spin_lock_irqsave(&admin_queue->q_lock, flags); + ena_com_handle_admin_completion(admin_queue); + spin_unlock_irqrestore(&admin_queue->q_lock, flags); + + if (comp_ctx->status != ENA_CMD_SUBMITTED) + break; + + if (time_is_before_jiffies(timeout)) { pr_err("Wait for completion (polling) timeout\n"); /* ENA didn't have any completion */ spin_lock_irqsave(&admin_queue->q_lock, flags); @@ -528,10 +533,6 @@ static int ena_com_wait_and_process_admin_cq_polling(struct ena_comp_ctx *comp_c goto err; } - spin_lock_irqsave(&admin_queue->q_lock, flags); - ena_com_handle_admin_completion(admin_queue); - spin_unlock_irqrestore(&admin_queue->q_lock, flags); - msleep(100); } From 418df30f7e9e8f4795fb2f3abf9744e5886df5ca Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Sun, 11 Jun 2017 15:42:44 +0300 Subject: [PATCH 0714/1065] net: ena: fix bug that might cause hang after consecutive open/close interface. Fixing a bug that the driver does not unmask the IO interrupts in ndo_open(): occasionally, the MSI-X interrupt (for one or more IO queues) can be masked when ndo_close() was called. If that is followed by ndo open(), then the MSI-X will be still masked so no interrupt will be received by the driver. Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 41 +++++++++++++------- 1 file changed, 26 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 7c1214d78855..0e3c60c7eccf 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1078,6 +1078,26 @@ inline void ena_adjust_intr_moderation(struct ena_ring *rx_ring, rx_ring->per_napi_bytes = 0; } +static inline void ena_unmask_interrupt(struct ena_ring *tx_ring, + struct ena_ring *rx_ring) +{ + struct ena_eth_io_intr_reg intr_reg; + + /* Update intr register: rx intr delay, + * tx intr delay and interrupt unmask + */ + ena_com_update_intr_reg(&intr_reg, + rx_ring->smoothed_interval, + tx_ring->smoothed_interval, + true); + + /* It is a shared MSI-X. + * Tx and Rx CQ have pointer to it. + * So we use one of them to reach the intr reg + */ + ena_com_unmask_intr(rx_ring->ena_com_io_cq, &intr_reg); +} + static inline void ena_update_ring_numa_node(struct ena_ring *tx_ring, struct ena_ring *rx_ring) { @@ -1108,7 +1128,6 @@ static int ena_io_poll(struct napi_struct *napi, int budget) { struct ena_napi *ena_napi = container_of(napi, struct ena_napi, napi); struct ena_ring *tx_ring, *rx_ring; - struct ena_eth_io_intr_reg intr_reg; u32 tx_work_done; u32 rx_work_done; @@ -1149,22 +1168,9 @@ static int ena_io_poll(struct napi_struct *napi, int budget) if (ena_com_get_adaptive_moderation_enabled(rx_ring->ena_dev)) ena_adjust_intr_moderation(rx_ring, tx_ring); - /* Update intr register: rx intr delay, - * tx intr delay and interrupt unmask - */ - ena_com_update_intr_reg(&intr_reg, - rx_ring->smoothed_interval, - tx_ring->smoothed_interval, - true); - - /* It is a shared MSI-X. - * Tx and Rx CQ have pointer to it. - * So we use one of them to reach the intr reg - */ - ena_com_unmask_intr(rx_ring->ena_com_io_cq, &intr_reg); + ena_unmask_interrupt(tx_ring, rx_ring); } - ena_update_ring_numa_node(tx_ring, rx_ring); ret = rx_work_done; @@ -1485,6 +1491,11 @@ static int ena_up_complete(struct ena_adapter *adapter) ena_napi_enable_all(adapter); + /* Enable completion queues interrupt */ + for (i = 0; i < adapter->num_queues; i++) + ena_unmask_interrupt(&adapter->tx_ring[i], + &adapter->rx_ring[i]); + /* schedule napi in case we had pending packets * from the last time we disable napi */ From 2d2c600a917127f16f179d5a88fc44ba3ed263ed Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Sun, 11 Jun 2017 15:42:45 +0300 Subject: [PATCH 0715/1065] net: ena: add missing return when ena_com_get_io_handlers() fails Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 0e3c60c7eccf..1e71e89e1e18 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1543,6 +1543,7 @@ static int ena_create_io_tx_queue(struct ena_adapter *adapter, int qid) "Failed to get TX queue handlers. TX queue num %d rc: %d\n", qid, rc); ena_com_destroy_io_queue(ena_dev, ena_qid); + return rc; } ena_com_update_numa_node(tx_ring->ena_com_io_cq, ctx.numa_node); @@ -1607,6 +1608,7 @@ static int ena_create_io_rx_queue(struct ena_adapter *adapter, int qid) "Failed to get RX queue handlers. RX queue num %d rc: %d\n", qid, rc); ena_com_destroy_io_queue(ena_dev, ena_qid); + return rc; } ena_com_update_numa_node(rx_ring->ena_com_io_cq, ctx.numa_node); From 661d2b0ccef6a63f48b61105cf7be17403d1db01 Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Sun, 11 Jun 2017 15:42:46 +0300 Subject: [PATCH 0716/1065] net: ena: fix race condition between submit and completion admin command Bug: "Completion context is occupied" error printout will be noticed in dmesg. This error will cause the admin command to fail, which will lead to an ena_probe() failure or a watchdog reset (depends on which admin command failed). Root cause: __ena_com_submit_admin_cmd() is the function that submits new entries to the admin queue. The function have a check that makes sure the queue is not full and the function does not override any outstanding command. It uses head and tail indexes for this check. The head is increased by ena_com_handle_admin_completion() which runs from interrupt context, and the tail index is increased by the submit function (the function is running under ->q_lock, so there is no risk of multithread increment). Each command is associated with a completion context. This context allocated before call to __ena_com_submit_admin_cmd() and freed by ena_com_wait_and_process_admin_cq_interrupts(), right after the command was completed. This can lead to a state where the head was increased, the check passed, but the completion context is still in use. Solution: Use the atomic variable ->outstanding_cmds instead of using the head and the tail indexes. This variable is safe for use since it is bumped in get_comp_ctx() in __ena_com_submit_admin_cmd() and is freed by comp_ctxt_release() Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_com.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c index e1c2fab6292f..ea60b9e67acb 100644 --- a/drivers/net/ethernet/amazon/ena/ena_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_com.c @@ -232,11 +232,9 @@ static struct ena_comp_ctx *__ena_com_submit_admin_cmd(struct ena_com_admin_queu tail_masked = admin_queue->sq.tail & queue_size_mask; /* In case of queue FULL */ - cnt = admin_queue->sq.tail - admin_queue->sq.head; + cnt = atomic_read(&admin_queue->outstanding_cmds); if (cnt >= admin_queue->q_depth) { - pr_debug("admin queue is FULL (tail %d head %d depth: %d)\n", - admin_queue->sq.tail, admin_queue->sq.head, - admin_queue->q_depth); + pr_debug("admin queue is full.\n"); admin_queue->stats.out_of_space++; return ERR_PTR(-ENOSPC); } From 0857d92f71b6cb75281fde913554b2d5436c394b Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Sun, 11 Jun 2017 15:42:47 +0300 Subject: [PATCH 0717/1065] net: ena: add missing unmap bars on device removal This patch also change the mapping functions to devm_ functions Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 1e71e89e1e18..4e9fbddd3b47 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -2853,6 +2853,11 @@ static void ena_release_bars(struct ena_com_dev *ena_dev, struct pci_dev *pdev) { int release_bars; + if (ena_dev->mem_bar) + devm_iounmap(&pdev->dev, ena_dev->mem_bar); + + devm_iounmap(&pdev->dev, ena_dev->reg_bar); + release_bars = pci_select_bars(pdev, IORESOURCE_MEM) & ENA_BAR_MASK; pci_release_selected_regions(pdev, release_bars); } @@ -2940,8 +2945,9 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_free_ena_dev; } - ena_dev->reg_bar = ioremap(pci_resource_start(pdev, ENA_REG_BAR), - pci_resource_len(pdev, ENA_REG_BAR)); + ena_dev->reg_bar = devm_ioremap(&pdev->dev, + pci_resource_start(pdev, ENA_REG_BAR), + pci_resource_len(pdev, ENA_REG_BAR)); if (!ena_dev->reg_bar) { dev_err(&pdev->dev, "failed to remap regs bar\n"); rc = -EFAULT; @@ -2961,8 +2967,9 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ena_set_push_mode(pdev, ena_dev, &get_feat_ctx); if (ena_dev->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV) { - ena_dev->mem_bar = ioremap_wc(pci_resource_start(pdev, ENA_MEM_BAR), - pci_resource_len(pdev, ENA_MEM_BAR)); + ena_dev->mem_bar = devm_ioremap_wc(&pdev->dev, + pci_resource_start(pdev, ENA_MEM_BAR), + pci_resource_len(pdev, ENA_MEM_BAR)); if (!ena_dev->mem_bar) { rc = -EFAULT; goto err_device_destroy; From a3af7c18cfe545a711e5df7491b7d6df71eba2ff Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Sun, 11 Jun 2017 15:42:48 +0300 Subject: [PATCH 0718/1065] net: ena: fix theoretical Rx hang on low memory systems For the rare case where the device runs out of free rx buffer descriptors (in case of pressure on kernel memory), and the napi handler continuously fail to refill new Rx descriptors until device rx queue totally runs out of all free rx buffers to post incoming packet, leading to a deadlock: * The device won't send interrupts since all the new Rx packets will be dropped. * The napi handler won't try to allocate new Rx descriptors since allocation is part of NAPI that's not being invoked any more The fix involves detecting this scenario and rescheduling NAPI (to refill buffers) by the keepalive/watchdog task. Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_ethtool.c | 1 + drivers/net/ethernet/amazon/ena/ena_netdev.c | 55 +++++++++++++++++++ drivers/net/ethernet/amazon/ena/ena_netdev.h | 2 + 3 files changed, 58 insertions(+) diff --git a/drivers/net/ethernet/amazon/ena/ena_ethtool.c b/drivers/net/ethernet/amazon/ena/ena_ethtool.c index 67b2338f8fb3..533b2fbdeef1 100644 --- a/drivers/net/ethernet/amazon/ena/ena_ethtool.c +++ b/drivers/net/ethernet/amazon/ena/ena_ethtool.c @@ -94,6 +94,7 @@ static const struct ena_stats ena_stats_rx_strings[] = { ENA_STAT_RX_ENTRY(dma_mapping_err), ENA_STAT_RX_ENTRY(bad_desc_num), ENA_STAT_RX_ENTRY(rx_copybreak_pkt), + ENA_STAT_RX_ENTRY(empty_rx_ring), }; static const struct ena_stats ena_stats_ena_com_strings[] = { diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 4e9fbddd3b47..3c366bfbbab1 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -190,6 +190,7 @@ static void ena_init_io_rings(struct ena_adapter *adapter) rxr->sgl_size = adapter->max_rx_sgl_size; rxr->smoothed_interval = ena_com_get_nonadaptive_moderation_interval_rx(ena_dev); + rxr->empty_rx_queue = 0; } } @@ -2619,6 +2620,58 @@ static void check_for_missing_tx_completions(struct ena_adapter *adapter) adapter->last_monitored_tx_qid = i % adapter->num_queues; } +/* trigger napi schedule after 2 consecutive detections */ +#define EMPTY_RX_REFILL 2 +/* For the rare case where the device runs out of Rx descriptors and the + * napi handler failed to refill new Rx descriptors (due to a lack of memory + * for example). + * This case will lead to a deadlock: + * The device won't send interrupts since all the new Rx packets will be dropped + * The napi handler won't allocate new Rx descriptors so the device will be + * able to send new packets. + * + * This scenario can happen when the kernel's vm.min_free_kbytes is too small. + * It is recommended to have at least 512MB, with a minimum of 128MB for + * constrained environment). + * + * When such a situation is detected - Reschedule napi + */ +static void check_for_empty_rx_ring(struct ena_adapter *adapter) +{ + struct ena_ring *rx_ring; + int i, refill_required; + + if (!test_bit(ENA_FLAG_DEV_UP, &adapter->flags)) + return; + + if (test_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags)) + return; + + for (i = 0; i < adapter->num_queues; i++) { + rx_ring = &adapter->rx_ring[i]; + + refill_required = + ena_com_sq_empty_space(rx_ring->ena_com_io_sq); + if (unlikely(refill_required == (rx_ring->ring_size - 1))) { + rx_ring->empty_rx_queue++; + + if (rx_ring->empty_rx_queue >= EMPTY_RX_REFILL) { + u64_stats_update_begin(&rx_ring->syncp); + rx_ring->rx_stats.empty_rx_ring++; + u64_stats_update_end(&rx_ring->syncp); + + netif_err(adapter, drv, adapter->netdev, + "trigger refill for ring %d\n", i); + + napi_schedule(rx_ring->napi); + rx_ring->empty_rx_queue = 0; + } + } else { + rx_ring->empty_rx_queue = 0; + } + } +} + /* Check for keep alive expiration */ static void check_for_missing_keep_alive(struct ena_adapter *adapter) { @@ -2673,6 +2726,8 @@ static void ena_timer_service(unsigned long data) check_for_missing_tx_completions(adapter); + check_for_empty_rx_ring(adapter); + if (debug_area) ena_dump_stats_to_buf(adapter, debug_area); diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h index 0e22bce6239d..8828f1d6dd22 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.h +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h @@ -184,6 +184,7 @@ struct ena_stats_rx { u64 dma_mapping_err; u64 bad_desc_num; u64 rx_copybreak_pkt; + u64 empty_rx_ring; }; struct ena_ring { @@ -231,6 +232,7 @@ struct ena_ring { struct ena_stats_tx tx_stats; struct ena_stats_rx rx_stats; }; + int empty_rx_queue; } ____cacheline_aligned; struct ena_stats_dev { From a2cc5198dac102775b21787752a2e0afe44ad311 Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Sun, 11 Jun 2017 15:42:49 +0300 Subject: [PATCH 0719/1065] net: ena: disable admin msix while working in polling mode Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_com.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c index ea60b9e67acb..f5b237e0bd60 100644 --- a/drivers/net/ethernet/amazon/ena/ena_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_com.c @@ -61,6 +61,8 @@ #define ENA_MMIO_READ_TIMEOUT 0xFFFFFFFF +#define ENA_REGS_ADMIN_INTR_MASK 1 + /*****************************************************************************/ /*****************************************************************************/ /*****************************************************************************/ @@ -1454,6 +1456,12 @@ void ena_com_admin_destroy(struct ena_com_dev *ena_dev) void ena_com_set_admin_polling_mode(struct ena_com_dev *ena_dev, bool polling) { + u32 mask_value = 0; + + if (polling) + mask_value = ENA_REGS_ADMIN_INTR_MASK; + + writel(mask_value, ena_dev->reg_bar + ENA_REGS_INTR_MASK_OFF); ena_dev->admin_queue.polling = polling; } From 800c55cb76be6617232ef50a2be29830f3aa8e5c Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Sun, 11 Jun 2017 15:42:50 +0300 Subject: [PATCH 0720/1065] net: ena: bug fix in lost tx packets detection mechanism check_for_missing_tx_completions() is called from a timer task and looking for lost tx packets. The old implementation accumulate all the lost tx packets and did not check if those packets were retrieved on a later stage. This cause to a situation where the driver reset the device for no reason. Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_ethtool.c | 1 - drivers/net/ethernet/amazon/ena/ena_netdev.c | 66 +++++++++++-------- drivers/net/ethernet/amazon/ena/ena_netdev.h | 14 +++- 3 files changed, 50 insertions(+), 31 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_ethtool.c b/drivers/net/ethernet/amazon/ena/ena_ethtool.c index 533b2fbdeef1..3ee55e2fd694 100644 --- a/drivers/net/ethernet/amazon/ena/ena_ethtool.c +++ b/drivers/net/ethernet/amazon/ena/ena_ethtool.c @@ -80,7 +80,6 @@ static const struct ena_stats ena_stats_tx_strings[] = { ENA_STAT_TX_ENTRY(tx_poll), ENA_STAT_TX_ENTRY(doorbells), ENA_STAT_TX_ENTRY(prepare_ctx_err), - ENA_STAT_TX_ENTRY(missing_tx_comp), ENA_STAT_TX_ENTRY(bad_req_id), }; diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 3c366bfbbab1..4f16ed38bcf3 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1995,6 +1995,7 @@ static netdev_tx_t ena_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_info->tx_descs = nb_hw_desc; tx_info->last_jiffies = jiffies; + tx_info->print_once = 0; tx_ring->next_to_use = ENA_TX_RING_IDX_NEXT(next_to_use, tx_ring->ring_size); @@ -2564,13 +2565,44 @@ err: "Reset attempt failed. Can not reset the device\n"); } -static void check_for_missing_tx_completions(struct ena_adapter *adapter) +static int check_missing_comp_in_queue(struct ena_adapter *adapter, + struct ena_ring *tx_ring) { struct ena_tx_buffer *tx_buf; unsigned long last_jiffies; + u32 missed_tx = 0; + int i; + + for (i = 0; i < tx_ring->ring_size; i++) { + tx_buf = &tx_ring->tx_buffer_info[i]; + last_jiffies = tx_buf->last_jiffies; + if (unlikely(last_jiffies && + time_is_before_jiffies(last_jiffies + TX_TIMEOUT))) { + if (!tx_buf->print_once) + netif_notice(adapter, tx_err, adapter->netdev, + "Found a Tx that wasn't completed on time, qid %d, index %d.\n", + tx_ring->qid, i); + + tx_buf->print_once = 1; + missed_tx++; + + if (unlikely(missed_tx > MAX_NUM_OF_TIMEOUTED_PACKETS)) { + netif_err(adapter, tx_err, adapter->netdev, + "The number of lost tx completions is above the threshold (%d > %d). Reset the device\n", + missed_tx, MAX_NUM_OF_TIMEOUTED_PACKETS); + set_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags); + return -EIO; + } + } + } + + return 0; +} + +static void check_for_missing_tx_completions(struct ena_adapter *adapter) +{ struct ena_ring *tx_ring; - int i, j, budget; - u32 missed_tx; + int i, budget, rc; /* Make sure the driver doesn't turn the device in other process */ smp_rmb(); @@ -2586,31 +2618,9 @@ static void check_for_missing_tx_completions(struct ena_adapter *adapter) for (i = adapter->last_monitored_tx_qid; i < adapter->num_queues; i++) { tx_ring = &adapter->tx_ring[i]; - for (j = 0; j < tx_ring->ring_size; j++) { - tx_buf = &tx_ring->tx_buffer_info[j]; - last_jiffies = tx_buf->last_jiffies; - if (unlikely(last_jiffies && time_is_before_jiffies(last_jiffies + TX_TIMEOUT))) { - netif_notice(adapter, tx_err, adapter->netdev, - "Found a Tx that wasn't completed on time, qid %d, index %d.\n", - tx_ring->qid, j); - - u64_stats_update_begin(&tx_ring->syncp); - missed_tx = tx_ring->tx_stats.missing_tx_comp++; - u64_stats_update_end(&tx_ring->syncp); - - /* Clear last jiffies so the lost buffer won't - * be counted twice. - */ - tx_buf->last_jiffies = 0; - - if (unlikely(missed_tx > MAX_NUM_OF_TIMEOUTED_PACKETS)) { - netif_err(adapter, tx_err, adapter->netdev, - "The number of lost tx completion is above the threshold (%d > %d). Reset the device\n", - missed_tx, MAX_NUM_OF_TIMEOUTED_PACKETS); - set_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags); - } - } - } + rc = check_missing_comp_in_queue(adapter, tx_ring); + if (unlikely(rc)) + return; budget--; if (!budget) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h index 8828f1d6dd22..88b5e5612338 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.h +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h @@ -146,7 +146,18 @@ struct ena_tx_buffer { u32 tx_descs; /* num of buffers used by this skb */ u32 num_of_bufs; - /* Save the last jiffies to detect missing tx packets */ + + /* Used for detect missing tx packets to limit the number of prints */ + u32 print_once; + /* Save the last jiffies to detect missing tx packets + * + * sets to non zero value on ena_start_xmit and set to zero on + * napi and timer_Service_routine. + * + * while this value is not protected by lock, + * a given packet is not expected to be handled by ena_start_xmit + * and by napi/timer_service at the same time. + */ unsigned long last_jiffies; struct ena_com_buf bufs[ENA_PKT_MAX_BUFS]; } ____cacheline_aligned; @@ -170,7 +181,6 @@ struct ena_stats_tx { u64 napi_comp; u64 tx_poll; u64 doorbells; - u64 missing_tx_comp; u64 bad_req_id; }; From e7ff7efae5708513a795e329909ccbe2ac367b1a Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Sun, 11 Jun 2017 15:42:51 +0300 Subject: [PATCH 0721/1065] net: ena: update ena driver to version 1.1.7 Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h index 88b5e5612338..a4d3d5e21068 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.h +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h @@ -45,7 +45,7 @@ #define DRV_MODULE_VER_MAJOR 1 #define DRV_MODULE_VER_MINOR 1 -#define DRV_MODULE_VER_SUBMINOR 2 +#define DRV_MODULE_VER_SUBMINOR 7 #define DRV_MODULE_NAME "ena" #ifndef DRV_MODULE_VERSION From 4b1f0d33db7d5bf92b5623e3ea2066e2de3999e3 Mon Sep 17 00:00:00 2001 From: Donald Sharp Date: Sat, 10 Jun 2017 16:30:17 -0400 Subject: [PATCH 0722/1065] net: ipmr: Fix some mroute forwarding issues in vrf's This patch fixes two issues: 1) When forwarding on *,G mroutes that are in a vrf, the kernel was dropping information about the actual incoming interface when calling ip_mr_forward from ip_mr_input. This caused ip_mr_forward to send the multicast packet back out the incoming interface. Fix this by modifying ip_mr_forward to be handed the correctly resolved dev. 2) When a unresolved cache entry is created we store the incoming skb on the unresolved cache entry and upon mroute resolution from the user space daemon, we attempt to forward the packet. Again we were not resolving to the correct incoming device for a vrf scenario, before calling ip_mr_forward. Fix this by resolving to the correct interface and calling ip_mr_forward with the result. Fixes: e58e41596811 ("net: Enable support for VRF with ipv4 multicast") Signed-off-by: Donald Sharp Acked-by: David Ahern Acked-by: Nikolay Aleksandrov Reviewed-by: Yotam Gigi Signed-off-by: David S. Miller --- net/ipv4/ipmr.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index b4f9622ee9f5..8ae425cad818 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -101,8 +101,8 @@ static struct mr_table *ipmr_new_table(struct net *net, u32 id); static void ipmr_free_table(struct mr_table *mrt); static void ip_mr_forward(struct net *net, struct mr_table *mrt, - struct sk_buff *skb, struct mfc_cache *cache, - int local); + struct net_device *dev, struct sk_buff *skb, + struct mfc_cache *cache, int local); static int ipmr_cache_report(struct mr_table *mrt, struct sk_buff *pkt, vifi_t vifi, int assert); static int __ipmr_fill_mroute(struct mr_table *mrt, struct sk_buff *skb, @@ -988,7 +988,7 @@ static void ipmr_cache_resolve(struct net *net, struct mr_table *mrt, rtnl_unicast(skb, net, NETLINK_CB(skb).portid); } else { - ip_mr_forward(net, mrt, skb, c, 0); + ip_mr_forward(net, mrt, skb->dev, skb, c, 0); } } } @@ -1073,7 +1073,7 @@ static int ipmr_cache_report(struct mr_table *mrt, /* Queue a packet for resolution. It gets locked cache entry! */ static int ipmr_cache_unresolved(struct mr_table *mrt, vifi_t vifi, - struct sk_buff *skb) + struct sk_buff *skb, struct net_device *dev) { const struct iphdr *iph = ip_hdr(skb); struct mfc_cache *c; @@ -1130,6 +1130,10 @@ static int ipmr_cache_unresolved(struct mr_table *mrt, vifi_t vifi, kfree_skb(skb); err = -ENOBUFS; } else { + if (dev) { + skb->dev = dev; + skb->skb_iif = dev->ifindex; + } skb_queue_tail(&c->mfc_un.unres.unresolved, skb); err = 0; } @@ -1828,10 +1832,10 @@ static int ipmr_find_vif(struct mr_table *mrt, struct net_device *dev) /* "local" means that we should preserve one skb (for local delivery) */ static void ip_mr_forward(struct net *net, struct mr_table *mrt, - struct sk_buff *skb, struct mfc_cache *cache, - int local) + struct net_device *dev, struct sk_buff *skb, + struct mfc_cache *cache, int local) { - int true_vifi = ipmr_find_vif(mrt, skb->dev); + int true_vifi = ipmr_find_vif(mrt, dev); int psend = -1; int vif, ct; @@ -1853,13 +1857,7 @@ static void ip_mr_forward(struct net *net, struct mr_table *mrt, } /* Wrong interface: drop packet and (maybe) send PIM assert. */ - if (mrt->vif_table[vif].dev != skb->dev) { - struct net_device *mdev; - - mdev = l3mdev_master_dev_rcu(mrt->vif_table[vif].dev); - if (mdev == skb->dev) - goto forward; - + if (mrt->vif_table[vif].dev != dev) { if (rt_is_output_route(skb_rtable(skb))) { /* It is our own packet, looped back. * Very complicated situation... @@ -2053,7 +2051,7 @@ int ip_mr_input(struct sk_buff *skb) read_lock(&mrt_lock); vif = ipmr_find_vif(mrt, dev); if (vif >= 0) { - int err2 = ipmr_cache_unresolved(mrt, vif, skb); + int err2 = ipmr_cache_unresolved(mrt, vif, skb, dev); read_unlock(&mrt_lock); return err2; @@ -2064,7 +2062,7 @@ int ip_mr_input(struct sk_buff *skb) } read_lock(&mrt_lock); - ip_mr_forward(net, mrt, skb, cache, local); + ip_mr_forward(net, mrt, dev, skb, cache, local); read_unlock(&mrt_lock); if (local) @@ -2238,7 +2236,7 @@ int ipmr_get_route(struct net *net, struct sk_buff *skb, iph->saddr = saddr; iph->daddr = daddr; iph->version = 0; - err = ipmr_cache_unresolved(mrt, vif, skb2); + err = ipmr_cache_unresolved(mrt, vif, skb2, dev); read_unlock(&mrt_lock); rcu_read_unlock(); return err; From 6d53cefb18e4646fb4bf62ccb6098fb3808486df Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 11 Jun 2017 15:51:56 -0700 Subject: [PATCH 0723/1065] compiler, clang: properly override 'inline' for clang Commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions") just caused more warnings due to re-defining the 'inline' macro. So undef it before re-defining it, and also add the 'notrace' attribute like the gcc version that this is overriding does. Maybe this makes clang happier. Signed-off-by: Linus Torvalds --- include/linux/compiler-clang.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h index ea9126006a69..d614c5ea1b5e 100644 --- a/include/linux/compiler-clang.h +++ b/include/linux/compiler-clang.h @@ -21,4 +21,5 @@ * -Wunused-function. This turns out to avoid the need for complex #ifdef * directives. Suppress the warning in clang as well. */ -#define inline inline __attribute__((unused)) +#undef inline +#define inline inline __attribute__((unused)) notrace From 32c1431eea4881a6b17bd7c639315010aeefa452 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 11 Jun 2017 16:48:20 -0700 Subject: [PATCH 0724/1065] Linux 4.12-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 853ae9179af9..83f6d9972cab 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 12 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Fearless Coyote # *DOCUMENTATION* From 973a27c7464231282489b2f14581e33cf29024b8 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Fri, 19 May 2017 16:20:35 +0530 Subject: [PATCH 0725/1065] PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav Signed-off-by: MyungJoo Ham --- drivers/devfreq/event/exynos-nocp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/devfreq/event/exynos-nocp.c b/drivers/devfreq/event/exynos-nocp.c index 5c3e7b11e8a6..f6e7956fc91a 100644 --- a/drivers/devfreq/event/exynos-nocp.c +++ b/drivers/devfreq/event/exynos-nocp.c @@ -267,7 +267,11 @@ static int exynos_nocp_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, nocp); - clk_prepare_enable(nocp->clk); + ret = clk_prepare_enable(nocp->clk); + if (ret) { + dev_err(&pdev->dev, "failed to prepare ppmu clock\n"); + return ret; + } pr_info("exynos-nocp: new NoC Probe device registered: %s\n", dev_name(dev)); From 97a6ba5bd0b54544fabe090711fabefc7a703a5f Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Fri, 19 May 2017 16:26:04 +0530 Subject: [PATCH 0726/1065] PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav Signed-off-by: MyungJoo Ham --- drivers/devfreq/event/exynos-ppmu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c index 9b7350935b73..8f6537aa989b 100644 --- a/drivers/devfreq/event/exynos-ppmu.c +++ b/drivers/devfreq/event/exynos-ppmu.c @@ -648,7 +648,11 @@ static int exynos_ppmu_probe(struct platform_device *pdev) dev_name(&pdev->dev), desc[i].name); } - clk_prepare_enable(info->ppmu.clk); + ret = clk_prepare_enable(info->ppmu.clk); + if (ret) { + dev_err(&pdev->dev, "failed to prepare ppmu clock\n"); + return ret; + } return 0; } From 6b1355f9ace06a65443c607e1b70872a5f613f80 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 7 Jun 2017 20:12:28 +0200 Subject: [PATCH 0727/1065] PM / devfreq: exynos-ppmu: Staticize event list The ppmu_events array is accessed only in this compilation unit so it can be made static. Signed-off-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Signed-off-by: MyungJoo Ham --- drivers/devfreq/event/exynos-ppmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c index 8f6537aa989b..d96e3dc71cf8 100644 --- a/drivers/devfreq/event/exynos-ppmu.c +++ b/drivers/devfreq/event/exynos-ppmu.c @@ -44,7 +44,7 @@ struct exynos_ppmu { { "ppmu-event2-"#name, PPMU_PMNCNT2 }, \ { "ppmu-event3-"#name, PPMU_PMNCNT3 } -struct __exynos_ppmu_events { +static struct __exynos_ppmu_events { char *name; int id; } ppmu_events[] = { From d758619ba6a5d250914b06b2b923a65e48bdd002 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 10 Jun 2017 11:59:43 +0300 Subject: [PATCH 0728/1065] drm: dw-hdmi: Fix compilation breakage by selecting REGMAP_MMIO The dw-hdmi driver switched to regmap-mmio, but lacks the dependency in Kconfig. This can result in compilation breakages. Fix it by selecting REGMAP_MMIO. Fixes: 80e2f97968b5 ("drm: bridge: dw-hdmi: Switch to regmap for register access") Reported-by: kbuild test robot Signed-off-by: Laurent Pinchart Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20170610085943.15788-1-laurent.pinchart+renesas@ideasonboard.com --- drivers/gpu/drm/bridge/synopsys/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig index 40d2827a6d19..53e78d092d18 100644 --- a/drivers/gpu/drm/bridge/synopsys/Kconfig +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig @@ -1,6 +1,7 @@ config DRM_DW_HDMI tristate select DRM_KMS_HELPER + select REGMAP_MMIO config DRM_DW_HDMI_AHB_AUDIO tristate "Synopsys Designware AHB Audio interface" From 24835611a96e9b41ad57dd5024915106293be7e9 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sat, 10 Jun 2017 13:36:38 +0200 Subject: [PATCH 0729/1065] mmc: meson-gx: work around broken SDIO with certain WiFi chips There have been reports about SDIO failing with certain WiFi chips in descriptor chain mode. SD / eMMC are working fine. So let's fall back to bounce buffer mode for command SD_IO_RW_EXTENDED. This was reported to fix the error. Fixes: 79ed05e329c3 "mmc: meson-gx: add support for descriptor chain mode" Signed-off-by: Heiner Kallweit Tested-by: Martin Blumenstingl Signed-off-by: Ulf Hansson --- drivers/mmc/host/meson-gx-mmc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 1842ed341af1..de962c2d5e00 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -210,6 +210,15 @@ static void meson_mmc_get_transfer_mode(struct mmc_host *mmc, int i; bool use_desc_chain_mode = true; + /* + * Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been + * reported. For some strange reason this occurs in descriptor + * chain mode only. So let's fall back to bounce buffer mode + * for command SD_IO_RW_EXTENDED. + */ + if (mrq->cmd->opcode == SD_IO_RW_EXTENDED) + return; + for_each_sg(data->sg, sg, data->sg_len, i) /* check for 8 byte alignment */ if (sg->offset & 7) { From 138437f591dd9a42d53c6fed1a3c85e02678851c Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Sun, 11 Jun 2017 09:44:20 +0800 Subject: [PATCH 0730/1065] xfrm: move xfrm_garbage_collect out of xfrm_policy_flush Now we will force to do garbage collection if any policy removed in xfrm_policy_flush(). But during xfrm_net_exit(). We call flow_cache_fini() first and set set fc->percpu to NULL. Then after we call xfrm_policy_fini() -> frxm_policy_flush() -> flow_cache_flush(), we will get NULL pointer dereference when check percpu_empty. The code path looks like: flow_cache_fini() - fc->percpu = NULL xfrm_policy_fini() - xfrm_policy_flush() - xfrm_garbage_collect() - flow_cache_flush() - flow_cache_percpu_empty() - fcp = per_cpu_ptr(fc->percpu, cpu) To reproduce, just add ipsec in netns and then remove the netns. v2: As Xin Long suggested, since only two other places need to call it. move xfrm_garbage_collect() outside xfrm_policy_flush(). v3: Fix subject mismatch after v2 fix. Fixes: 35db06912189 ("xfrm: do the garbage collection after flushing policy") Signed-off-by: Hangbin Liu Reviewed-by: Xin Long Signed-off-by: Steffen Klassert --- net/key/af_key.c | 2 ++ net/xfrm/xfrm_policy.c | 4 ---- net/xfrm/xfrm_user.c | 1 + 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index 512dc43d0ce6..5103f92e2eb0 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2755,6 +2755,8 @@ static int pfkey_spdflush(struct sock *sk, struct sk_buff *skb, const struct sad int err, err2; err = xfrm_policy_flush(net, XFRM_POLICY_TYPE_MAIN, true); + if (!err) + xfrm_garbage_collect(net); err2 = unicast_flush_resp(sk, hdr); if (err || err2) { if (err == -ESRCH) /* empty table - old silent behavior */ diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index ed4e52d95172..643a18f72032 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1006,10 +1006,6 @@ int xfrm_policy_flush(struct net *net, u8 type, bool task_valid) err = -ESRCH; out: spin_unlock_bh(&net->xfrm.xfrm_policy_lock); - - if (cnt) - xfrm_garbage_collect(net); - return err; } EXPORT_SYMBOL(xfrm_policy_flush); diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 38614df33ec8..86116e9aaf3d 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -2027,6 +2027,7 @@ static int xfrm_flush_policy(struct sk_buff *skb, struct nlmsghdr *nlh, return 0; return err; } + xfrm_garbage_collect(net); c.data.type = type; c.event = nlh->nlmsg_type; From ba80aa909c99802c428682c352b0ee0baac0acd3 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 8 Jun 2017 04:51:54 +0000 Subject: [PATCH 0731/1065] configfs: Fix race between create_link and configfs_rmdir This patch closes a long standing race in configfs between the creation of a new symlink in create_link(), while the symlink target's config_item is being concurrently removed via configfs_rmdir(). This can happen because the symlink target's reference is obtained by config_item_get() in create_link() before the CONFIGFS_USET_DROPPING bit set by configfs_detach_prep() during configfs_rmdir() shutdown is actually checked.. This originally manifested itself on ppc64 on v4.8.y under heavy load using ibmvscsi target ports with Novalink API: [ 7877.289863] rpadlpar_io: slot U8247.22L.212A91A-V1-C8 added [ 7879.893760] ------------[ cut here ]------------ [ 7879.893768] WARNING: CPU: 15 PID: 17585 at ./include/linux/kref.h:46 config_item_get+0x7c/0x90 [configfs] [ 7879.893811] CPU: 15 PID: 17585 Comm: targetcli Tainted: G O 4.8.17-customv2.22 #12 [ 7879.893812] task: c00000018a0d3400 task.stack: c0000001f3b40000 [ 7879.893813] NIP: d000000002c664ec LR: d000000002c60980 CTR: c000000000b70870 [ 7879.893814] REGS: c0000001f3b43810 TRAP: 0700 Tainted: G O (4.8.17-customv2.22) [ 7879.893815] MSR: 8000000000029033 CR: 28222242 XER: 00000000 [ 7879.893820] CFAR: d000000002c664bc SOFTE: 1 GPR00: d000000002c60980 c0000001f3b43a90 d000000002c70908 c0000000fbc06820 GPR04: c0000001ef1bd900 0000000000000004 0000000000000001 0000000000000000 GPR08: 0000000000000000 0000000000000001 d000000002c69560 d000000002c66d80 GPR12: c000000000b70870 c00000000e798700 c0000001f3b43ca0 c0000001d4949d40 GPR16: c00000014637e1c0 0000000000000000 0000000000000000 c0000000f2392940 GPR20: c0000001f3b43b98 0000000000000041 0000000000600000 0000000000000000 GPR24: fffffffffffff000 0000000000000000 d000000002c60be0 c0000001f1dac490 GPR28: 0000000000000004 0000000000000000 c0000001ef1bd900 c0000000f2392940 [ 7879.893839] NIP [d000000002c664ec] config_item_get+0x7c/0x90 [configfs] [ 7879.893841] LR [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893842] Call Trace: [ 7879.893844] [c0000001f3b43ac0] [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893847] [c0000001f3b43b10] [c000000000329770] do_dentry_open+0x2c0/0x460 [ 7879.893849] [c0000001f3b43b70] [c000000000344480] path_openat+0x210/0x1490 [ 7879.893851] [c0000001f3b43c80] [c00000000034708c] do_filp_open+0xfc/0x170 [ 7879.893853] [c0000001f3b43db0] [c00000000032b5bc] do_sys_open+0x1cc/0x390 [ 7879.893856] [c0000001f3b43e30] [c000000000009584] system_call+0x38/0xec [ 7879.893856] Instruction dump: [ 7879.893858] 409d0014 38210030 e8010010 7c0803a6 4e800020 3d220000 e94981e0 892a0000 [ 7879.893861] 2f890000 409effe0 39200001 992a0000 <0fe00000> 4bffffd0 60000000 60000000 [ 7879.893866] ---[ end trace 14078f0b3b5ad0aa ]--- To close this race, go ahead and obtain the symlink's target config_item reference only after the existing CONFIGFS_USET_DROPPING check succeeds. This way, if configfs_rmdir() wins create_link() will return -ENONET, and if create_link() wins configfs_rmdir() will return -EBUSY. Reported-by: Bryant G. Ly Tested-by: Bryant G. Ly Signed-off-by: Nicholas Bellinger Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org --- fs/configfs/symlink.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index a6ab012a2c6a..c8aabba502f6 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -83,14 +83,13 @@ static int create_link(struct config_item *parent_item, ret = -ENOMEM; sl = kmalloc(sizeof(struct configfs_symlink), GFP_KERNEL); if (sl) { - sl->sl_target = config_item_get(item); spin_lock(&configfs_dirent_lock); if (target_sd->s_type & CONFIGFS_USET_DROPPING) { spin_unlock(&configfs_dirent_lock); - config_item_put(item); kfree(sl); return -ENOENT; } + sl->sl_target = config_item_get(item); list_add(&sl->sl_list, &target_sd->s_links); spin_unlock(&configfs_dirent_lock); ret = configfs_create_link(sl, parent_item->ci_dentry, From 19e72d3abb63cb16d021a4066ce1a18880509e99 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Thu, 9 Feb 2017 17:28:50 -0800 Subject: [PATCH 0732/1065] configfs: Introduce config_item_get_unless_zero() Signed-off-by: Bart Van Assche [hch: minor style tweak] Signed-off-by: Christoph Hellwig --- fs/configfs/item.c | 8 ++++++++ include/linux/configfs.h | 3 ++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/configfs/item.c b/fs/configfs/item.c index 8b2a994042dd..a66f6624d899 100644 --- a/fs/configfs/item.c +++ b/fs/configfs/item.c @@ -138,6 +138,14 @@ struct config_item *config_item_get(struct config_item *item) } EXPORT_SYMBOL(config_item_get); +struct config_item *config_item_get_unless_zero(struct config_item *item) +{ + if (item && kref_get_unless_zero(&item->ci_kref)) + return item; + return NULL; +} +EXPORT_SYMBOL(config_item_get_unless_zero); + static void config_item_cleanup(struct config_item *item) { struct config_item_type *t = item->ci_type; diff --git a/include/linux/configfs.h b/include/linux/configfs.h index 2319b8c108e8..c96709049683 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -74,7 +74,8 @@ extern void config_item_init_type_name(struct config_item *item, const char *name, struct config_item_type *type); -extern struct config_item * config_item_get(struct config_item *); +extern struct config_item *config_item_get(struct config_item *); +extern struct config_item *config_item_get_unless_zero(struct config_item *); extern void config_item_put(struct config_item *); struct config_item_type { From 83848fbe7e6af978c080a88c130a67178b1ac0e4 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Wed, 7 Jun 2017 12:54:58 +0800 Subject: [PATCH 0733/1065] ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Considering this case: 1. A program opens a sysfs table file 65535 times, it can increase validation_count and first increment cause the table to be mapped: validation_count = 65535 2. AML execution causes "Load" to be executed on the same table, this time it cannot increase validation_count, so validation_count remains: validation_count = 65535 3. The program closes sysfs table file 65535 times, it can decrease validation_count and the last decrement cause the table to be unmapped: validation_count = 0 4. AML code still accessing the loaded table, kernel crash can be observed. To prevent that from happening, add a validation_count threashold. When it is reached, the validation_count can no longer be incremented/decremented to invalidate the table descriptor (means preventing table unmappings) Note that code added in acpi_tb_put_table() is actually a no-op but changes the warning message into a "warn once" one. Lv Zheng. Signed-off-by: Lv Zheng [ rjw: Changelog, comments ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/tbutils.c | 34 +++++++++++++++++++++++++--------- include/acpi/actbl.h | 14 ++++++++++++++ 2 files changed, 39 insertions(+), 9 deletions(-) diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 7abe66505739..0d2e98920069 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -416,9 +416,18 @@ acpi_tb_get_table(struct acpi_table_desc *table_desc, } } - table_desc->validation_count++; - if (table_desc->validation_count == 0) { - table_desc->validation_count--; + if (table_desc->validation_count < ACPI_MAX_TABLE_VALIDATIONS) { + table_desc->validation_count++; + + /* + * Detect validation_count overflows to ensure that the warning + * message will only be printed once. + */ + if (table_desc->validation_count >= ACPI_MAX_TABLE_VALIDATIONS) { + ACPI_WARNING((AE_INFO, + "Table %p, Validation count overflows\n", + table_desc)); + } } *out_table = table_desc->pointer; @@ -445,13 +454,20 @@ void acpi_tb_put_table(struct acpi_table_desc *table_desc) ACPI_FUNCTION_TRACE(acpi_tb_put_table); - if (table_desc->validation_count == 0) { - ACPI_WARNING((AE_INFO, - "Table %p, Validation count is zero before decrement\n", - table_desc)); - return_VOID; + if (table_desc->validation_count < ACPI_MAX_TABLE_VALIDATIONS) { + table_desc->validation_count--; + + /* + * Detect validation_count underflows to ensure that the warning + * message will only be printed once. + */ + if (table_desc->validation_count >= ACPI_MAX_TABLE_VALIDATIONS) { + ACPI_WARNING((AE_INFO, + "Table %p, Validation count underflows\n", + table_desc)); + return_VOID; + } } - table_desc->validation_count--; if (table_desc->validation_count == 0) { diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index d92543f3bbfd..bdc55c0da19c 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -374,6 +374,20 @@ struct acpi_table_desc { u16 validation_count; }; +/* + * Maximum value of the validation_count field in struct acpi_table_desc. + * When reached, validation_count cannot be changed any more and the table will + * be permanently regarded as validated. + * + * This is to prevent situations in which unbalanced table get/put operations + * may cause premature table unmapping in the OS to happen. + * + * The maximum validation count can be defined to any value, but should be + * greater than the maximum number of OS early stage mapping slots to avoid + * leaking early stage table mappings to the late stage. + */ +#define ACPI_MAX_TABLE_VALIDATIONS ACPI_UINT16_MAX + /* Masks for Flags field above */ #define ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL (0) /* Virtual address, external maintained */ From ff0a6d6f932ff4b9eb8e8140f98cc1cf763d0d78 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 12 Jun 2017 14:16:16 +0200 Subject: [PATCH 0734/1065] Revert "cpufreq: schedutil: Reduce frequencies slower" Revert commit 39b64aa1c007 (cpufreq: schedutil: Reduce frequencies slower) that introduced unintentional changes in behavior leading to adverse effects on some systems. Reported-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- kernel/sched/cpufreq_schedutil.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c index 76877a62b5fa..8773d1efdfab 100644 --- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -101,9 +101,6 @@ static void sugov_update_commit(struct sugov_policy *sg_policy, u64 time, if (sg_policy->next_freq == next_freq) return; - if (sg_policy->next_freq > next_freq) - next_freq = (sg_policy->next_freq + next_freq) >> 1; - sg_policy->next_freq = next_freq; sg_policy->last_freq_update_time = time; From b8e11f7d2791bd9320be1c6e772a60b2aa093e45 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Tomasz=20Wilczy=C5=84ski?= Date: Sun, 11 Jun 2017 17:28:39 +0900 Subject: [PATCH 0735/1065] cpufreq: conservative: Allow down_threshold to take values from 1 to 10 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 27ed3cd2ebf4 (cpufreq: conservative: Fix the logic in frequency decrease checking) removed the 10 point substraction when comparing the load against down_threshold but did not remove the related limit for the down_threshold value. As a result, down_threshold lower than 11 is not allowed even though values from 1 to 10 do work correctly too. The comment ("cannot be lower than 11 otherwise freq will not fall") also does not apply after removing the substraction. For this reason, allow down_threshold to take any value from 1 to 99 and fix the related comment. Fixes: 27ed3cd2ebf4 (cpufreq: conservative: Fix the logic in frequency decrease checking) Signed-off-by: Tomasz Wilczyński Acked-by: Viresh Kumar Cc: 3.10+ # 3.10+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq_conservative.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 992f7c20760f..88220ff3e1c2 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -185,8 +185,8 @@ static ssize_t store_down_threshold(struct gov_attr_set *attr_set, int ret; ret = sscanf(buf, "%u", &input); - /* cannot be lower than 11 otherwise freq will not fall */ - if (ret != 1 || input < 11 || input > 100 || + /* cannot be lower than 1 otherwise freq will not fall */ + if (ret != 1 || input < 1 || input > 100 || input >= dbs_data->up_threshold) return -EINVAL; From b2cdd8e1b54849477a32d820acc2e87828a38f3d Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Sun, 11 Jun 2017 14:28:54 +0200 Subject: [PATCH 0736/1065] cpuidle: dt: Add missing 'of_node_put()' 'of_node_put()' should be called on pointer returned by 'of_parse_phandle()' when done. In this function this is done in all path except this 'continue', so add it. Fixes: 97735da074fd (drivers: cpuidle: Add status property to ARM idle states) Signed-off-by: Christophe Jaillet Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/dt_idle_states.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c index ffca4fc0061d..ae8eb0359889 100644 --- a/drivers/cpuidle/dt_idle_states.c +++ b/drivers/cpuidle/dt_idle_states.c @@ -180,8 +180,10 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, if (!state_node) break; - if (!of_device_is_available(state_node)) + if (!of_device_is_available(state_node)) { + of_node_put(state_node); continue; + } if (!idle_state_valid(state_node, i, cpumask)) { pr_warn("%s idle state not valid, bailing out\n", From 3db1200ca21f3c63c9044185dc5762ef996848cb Mon Sep 17 00:00:00 2001 From: Frank Rowand Date: Fri, 9 Jun 2017 17:26:32 -0700 Subject: [PATCH 0737/1065] clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable Fix boot warning 'Trying to vfree() nonexistent vm area' from arch_timer_mem_of_init(). Refactored code attempts to read and iounmap using address frame instead of address ioremap(frame->cntbase). Fixes: c389d701dfb70 ("clocksource: arm_arch_timer: split MMIO timer probing.") Signed-off-by: Frank Rowand Reviewed-by: Fu Wei Acked-by: Marc Zyngier Signed-off-by: Daniel Lezcano --- drivers/clocksource/arm_arch_timer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 4bed671e490e..8b5c30062d99 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -1209,9 +1209,9 @@ arch_timer_mem_frame_get_cntfrq(struct arch_timer_mem_frame *frame) return 0; } - rate = readl_relaxed(frame + CNTFRQ); + rate = readl_relaxed(base + CNTFRQ); - iounmap(frame); + iounmap(base); return rate; } From 3500cd73dff48f28f4ba80c171c4c80034d40f76 Mon Sep 17 00:00:00 2001 From: Christian Perle Date: Mon, 12 Jun 2017 10:06:57 +0200 Subject: [PATCH 0738/1065] proc: snmp6: Use correct type in memset Reading /proc/net/snmp6 yields bogus values on 32 bit kernels. Use "u64" instead of "unsigned long" in sizeof(). Fixes: 4a4857b1c81e ("proc: Reduce cache miss in snmp6_seq_show") Signed-off-by: Christian Perle Signed-off-by: David S. Miller --- net/ipv6/proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index cc8e3ae9ca73..e88bcb8ff0fd 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -219,7 +219,7 @@ static void snmp6_seq_show_item64(struct seq_file *seq, void __percpu *mib, u64 buff64[SNMP_MIB_MAX]; int i; - memset(buff64, 0, sizeof(unsigned long) * SNMP_MIB_MAX); + memset(buff64, 0, sizeof(u64) * SNMP_MIB_MAX); snmp_get_cpu_field64_batch(buff64, itemlist, mib, syncpoff); for (i = 0; itemlist[i].name; i++) From b72eb8435b25be3a1880264cf32ac91e626ba5ba Mon Sep 17 00:00:00 2001 From: YD Tseng Date: Fri, 9 Jun 2017 14:48:40 +0300 Subject: [PATCH 0739/1065] usb: xhci: Fix USB 3.1 supported protocol parsing xHCI host controllers can have both USB 3.1 and 3.0 extended speed protocol lists. If the USB3.1 speed is parsed first and 3.0 second then the minor revision supported will be overwritten by the 3.0 speeds and the USB3 roothub will only show support for USB 3.0 speeds. This was the case with a xhci controller with the supported protocol capability listed below. In xhci-mem.c, the USB 3.1 speed is parsed first, the min_rev of usb3_rhub is set as 0x10. And then USB 3.0 is parsed. However, the min_rev of usb3_rhub will be changed to 0x00. If USB 3.1 device is connected behind this host controller, the speed of USB 3.1 device just reports 5G speed using lsusb. 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 01 08 00 00 00 00 00 40 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 02 08 10 03 55 53 42 20 01 02 00 00 00 00 00 00 //USB 3.1 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 02 08 00 03 55 53 42 20 03 06 00 00 00 00 00 00 //USB 3.0 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 02 08 00 02 55 53 42 20 09 0E 19 00 00 00 00 00 //USB 2.0 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This patch fixes the issue by only owerwriting the minor revision if it is higher than the existing one. [reword commit message -Mathias] Cc: Signed-off-by: YD Tseng Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1f1687e888d6..fddf2731f798 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2119,11 +2119,12 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, { u32 temp, port_offset, port_count; int i; - u8 major_revision; + u8 major_revision, minor_revision; struct xhci_hub *rhub; temp = readl(addr); major_revision = XHCI_EXT_PORT_MAJOR(temp); + minor_revision = XHCI_EXT_PORT_MINOR(temp); if (major_revision == 0x03) { rhub = &xhci->usb3_rhub; @@ -2137,7 +2138,9 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, return; } rhub->maj_rev = XHCI_EXT_PORT_MAJOR(temp); - rhub->min_rev = XHCI_EXT_PORT_MINOR(temp); + + if (rhub->min_rev < minor_revision) + rhub->min_rev = minor_revision; /* Port offset and count in the third dword, see section 7.2 */ temp = readl(addr + 2); From d2f48f05cd2a2a0a708fbfa45f1a00a87660d937 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 9 Jun 2017 14:48:41 +0300 Subject: [PATCH 0740/1065] usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk When plugging an USB webcam I see the following message: [106385.615559] xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [106390.583860] handle_tx_event: 913 callbacks suppressed With this patch applied, I get no more printing of this message. Cc: Signed-off-by: Corentin Labbe Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index fcf1f3f63e7a..1bcf971141c0 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -201,6 +201,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1042) xhci->quirks |= XHCI_BROKEN_STREAMS; + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == 0x1142) + xhci->quirks |= XHCI_TRUST_TX_LENGTH; if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; From 60ce2858514ed9ccaf00dc7e9f4dc219537e9855 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Fri, 9 Jun 2017 10:14:53 +0100 Subject: [PATCH 0741/1065] ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nop Commit 06a4b6d009a1 ("ARM: 8677/1: boot/compressed: fix decompressor header layout for v7-M") fixed an issue in the layout of the header of the compressed kernel image that was caused by the assembler emitting narrow opcodes for 'mov r0, r0', and for this reason, the mnemonic was updated to use the W() macro, which will append the .w suffix (which forces a wide encoding) if required, i.e., when building the kernel in Thumb2 mode. However, this failed to take into account that on Thumb2 kernels built for CPUs that are also ARM capable, the entry point is entered in ARM mode, and so the instructions emitted here will be ARM instructions that only exist in a wide encoding to begin with, which is why the assembler rejects the .w suffix here and aborts the build with the following message: head.S: Assembler messages: head.S:132: Error: width suffixes are invalid in ARM mode -- `mov.w r0,r0' So replace the W(mov) with separate ARM and Thumb2 instructions, where the latter will only be used for THUMB2_ONLY builds. Fixes: 06a4b6d009a1 ("ARM: 8677/1: boot/compressed: fix decompressor ...") Reported-by: Arnd Bergmann Acked-by: Arnd Bergmann Signed-off-by: Ard Biesheuvel Signed-off-by: Russell King --- arch/arm/boot/compressed/efi-header.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S index 3f7d1b74c5e0..a17ca8d78656 100644 --- a/arch/arm/boot/compressed/efi-header.S +++ b/arch/arm/boot/compressed/efi-header.S @@ -17,7 +17,8 @@ @ there. .inst 'M' | ('Z' << 8) | (0x1310 << 16) @ tstne r0, #0x4d000 #else - W(mov) r0, r0 + AR_CLASS( mov r0, r0 ) + M_CLASS( nop.w ) #endif .endm From bbeedfda8eee0b17ea16e4e157c596095458676a Mon Sep 17 00:00:00 2001 From: Yisheng Xie Date: Fri, 9 Jun 2017 15:28:18 +0100 Subject: [PATCH 0742/1065] ARM: 8681/1: make VMSPLIT_3G_OPT depends on !ARM_LPAE When both enable CONFIG_ARM_LPAE=y and CONFIG_VMSPLIT_3G_OPT=y, which means use PAGE_OFFSET=0xB0000000 with ARM_LPAE, the kernel will boot fail and stop after uncompressed: Starting kernel ... Uart base = 0x20001000 watchdog reg = 0x20013000 dtb addr = 0x80840308 Uncompressing Linux... done, booting the kernel. For ARM_LPAE only support 3:1, 2:2, 1:3 split of TTBR1, which mention in: http://elinux.org/images/6/6a/Elce11_marinas.pdf - p16 So we should make VMSPLIT_3G_OPT depends on !ARM_LPAE to avoid trigger this bug. Acked-by: Nicolas Pitre Signed-off-by: Yisheng Xie Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4c1a35f15838..c0fcab6a5504 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1416,6 +1416,7 @@ choice config VMSPLIT_3G bool "3G/1G user/kernel split" config VMSPLIT_3G_OPT + depends on !ARM_LPAE bool "3G/1G user/kernel split (for full 1G low memory)" config VMSPLIT_2G bool "2G/2G user/kernel split" From d360a687d99577110c181e67ebfb9a1b6fed63a2 Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Mon, 12 Jun 2017 13:35:52 +0100 Subject: [PATCH 0743/1065] ARM: 8682/1: V7M: Set cacheid iff DminLine or IminLine is nonzero Cache support is optional feature in M-class cores, thus DminLine or IminLine of Cache Type Register is zero if caches are not implemented, but we check the whole CTR which has other features encoded there. Let's be more precise and check for DminLine and IminLine of CTR before we set cacheid. Signed-off-by: Vladimir Murzin Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 32e1a9513dc7..4e80bf7420d4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -315,7 +315,7 @@ static void __init cacheid_init(void) if (arch >= CPU_ARCH_ARMv6) { unsigned int cachetype = read_cpuid_cachetype(); - if ((arch == CPU_ARCH_ARMv7M) && !cachetype) { + if ((arch == CPU_ARCH_ARMv7M) && !(cachetype & 0xf000f)) { cacheid = 0; } else if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ From 94114c367553f3301747e47f6947cabde947575f Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 7 Jun 2017 23:36:03 -0700 Subject: [PATCH 0744/1065] tick/broadcast: Make tick_broadcast_setup_oneshot() static This function isn't used outside of tick-broadcast.c, so let's mark it static. Signed-off-by: Stephen Boyd Link: http://lkml.kernel.org/r/20170608063603.13276-1-sboyd@codeaurora.org Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 4 +++- kernel/time/tick-internal.h | 2 -- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 987e496bb51a..b398c2ea69b2 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -37,9 +37,11 @@ static int tick_broadcast_forced; static __cacheline_aligned_in_smp DEFINE_RAW_SPINLOCK(tick_broadcast_lock); #ifdef CONFIG_TICK_ONESHOT +static void tick_broadcast_setup_oneshot(struct clock_event_device *bc); static void tick_broadcast_clear_oneshot(int cpu); static void tick_resume_broadcast_oneshot(struct clock_event_device *bc); #else +static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { BUG(); } static inline void tick_broadcast_clear_oneshot(int cpu) { } static inline void tick_resume_broadcast_oneshot(struct clock_event_device *bc) { } #endif @@ -867,7 +869,7 @@ static void tick_broadcast_init_next_event(struct cpumask *mask, /** * tick_broadcast_setup_oneshot - setup the broadcast device */ -void tick_broadcast_setup_oneshot(struct clock_event_device *bc) +static void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { int cpu = smp_processor_id(); diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index f738251000fe..be0ac01f2e12 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -126,7 +126,6 @@ static inline int tick_check_oneshot_change(int allow_nohz) { return 0; } /* Functions related to oneshot broadcasting */ #if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) && defined(CONFIG_TICK_ONESHOT) -extern void tick_broadcast_setup_oneshot(struct clock_event_device *bc); extern void tick_broadcast_switch_to_oneshot(void); extern void tick_shutdown_broadcast_oneshot(unsigned int cpu); extern int tick_broadcast_oneshot_active(void); @@ -134,7 +133,6 @@ extern void tick_check_oneshot_broadcast_this_cpu(void); bool tick_broadcast_oneshot_available(void); extern struct cpumask *tick_get_broadcast_oneshot_mask(void); #else /* !(BROADCAST && ONESHOT): */ -static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { BUG(); } static inline void tick_broadcast_switch_to_oneshot(void) { } static inline void tick_shutdown_broadcast_oneshot(unsigned int cpu) { } static inline int tick_broadcast_oneshot_active(void) { return 0; } From 8a524f803a3e0290cdba6d373361b2cef9752934 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 12 Jun 2017 13:52:46 +0200 Subject: [PATCH 0745/1065] x86/debug: Handle early WARN_ONs proper Hans managed to trigger a WARN very early in the boot which killed his (Virtual) box. The reason is that the recent rework of WARN() to use UD0 forgot to add the fixup_bug() call to early_fixup_exception(). As a result the kernel does not handle the WARN_ON injected UD0 exception and panics. Add the missing fixup call, so early UD's injected by WARN() get handled. Fixes: 9a93848fe787 ("x86/debug: Implement __WARN() using UD0") Reported-and-tested-by: Hans de Goede Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Cc: Linus Torvalds Cc: Frank Mehnert Cc: Hans de Goede Cc: Michael Thayer Link: http://lkml.kernel.org/r/20170612180108.w4vgu2ckucmllf3a@hirez.programming.kicks-ass.net --- arch/x86/include/asm/extable.h | 1 + arch/x86/kernel/traps.c | 2 +- arch/x86/mm/extable.c | 3 +++ 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/extable.h b/arch/x86/include/asm/extable.h index b8ad261d11dc..c66d19e3c23e 100644 --- a/arch/x86/include/asm/extable.h +++ b/arch/x86/include/asm/extable.h @@ -29,6 +29,7 @@ struct pt_regs; } while (0) extern int fixup_exception(struct pt_regs *regs, int trapnr); +extern int fixup_bug(struct pt_regs *regs, int trapnr); extern bool ex_has_fault_handler(unsigned long ip); extern void early_fixup_exception(struct pt_regs *regs, int trapnr); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 3995d3a777d4..bf54309b85da 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -182,7 +182,7 @@ int is_valid_bugaddr(unsigned long addr) return ud == INSN_UD0 || ud == INSN_UD2; } -static int fixup_bug(struct pt_regs *regs, int trapnr) +int fixup_bug(struct pt_regs *regs, int trapnr) { if (trapnr != X86_TRAP_UD) return 0; diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c index 35ea061010a1..0ea8afcb929c 100644 --- a/arch/x86/mm/extable.c +++ b/arch/x86/mm/extable.c @@ -162,6 +162,9 @@ void __init early_fixup_exception(struct pt_regs *regs, int trapnr) if (fixup_exception(regs, trapnr)) return; + if (fixup_bug(regs, trapnr)) + return; + fail: early_printk("PANIC: early exception 0x%02x IP %lx:%lx error %lx cr2 0x%lx\n", (unsigned)trapnr, (unsigned long)regs->cs, regs->ip, From 675c8da049fd6556eb2d6cdd745fe812752f07a8 Mon Sep 17 00:00:00 2001 From: "Karicheri, Muralidharan" Date: Mon, 12 Jun 2017 15:06:26 -0400 Subject: [PATCH 0746/1065] hsr: fix incorrect warning When HSR interface is setup using ip link command, an annoying warning appears with the trace as below:- [ 203.019828] hsr_get_node: Non-HSR frame [ 203.019833] Modules linked in: [ 203.019848] CPU: 0 PID: 158 Comm: sd-resolve Tainted: G W 4.12.0-rc3-00052-g9fa6bf70 #2 [ 203.019853] Hardware name: Generic DRA74X (Flattened Device Tree) [ 203.019869] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 203.019880] [] (show_stack) from [] (dump_stack+0xac/0xe0) [ 203.019894] [] (dump_stack) from [] (__warn+0xd8/0x104) [ 203.019907] [] (__warn) from [] (warn_slowpath_fmt+0x34/0x44) root@am57xx-evm:~# [ 203.019921] [] (warn_slowpath_fmt) from [] (hsr_get_node+0x148/0x170) [ 203.019932] [] (hsr_get_node) from [] (hsr_forward_skb+0x110/0x7c0) [ 203.019942] [] (hsr_forward_skb) from [] (hsr_dev_xmit+0x2c/0x34) [ 203.019954] [] (hsr_dev_xmit) from [] (dev_hard_start_xmit+0xc4/0x3bc) [ 203.019963] [] (dev_hard_start_xmit) from [] (__dev_queue_xmit+0x7c4/0x98c) [ 203.019974] [] (__dev_queue_xmit) from [] (ip6_finish_output2+0x330/0xc1c) [ 203.019983] [] (ip6_finish_output2) from [] (ip6_output+0x58/0x454) [ 203.019994] [] (ip6_output) from [] (mld_sendpack+0x420/0x744) As this is an expected path to hsr_get_node() with frame coming from the master interface, add a check to ensure packet is not from the master port and then warn. Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- net/hsr/hsr_forward.c | 3 +-- net/hsr/hsr_framereg.c | 9 +++++++-- net/hsr/hsr_framereg.h | 2 +- 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c index 4ebe2aa3e7d3..04b5450c5a55 100644 --- a/net/hsr/hsr_forward.c +++ b/net/hsr/hsr_forward.c @@ -324,8 +324,7 @@ static int hsr_fill_frame_info(struct hsr_frame_info *frame, unsigned long irqflags; frame->is_supervision = is_supervision_frame(port->hsr, skb); - frame->node_src = hsr_get_node(&port->hsr->node_db, skb, - frame->is_supervision); + frame->node_src = hsr_get_node(port, skb, frame->is_supervision); if (frame->node_src == NULL) return -1; /* Unknown node and !is_supervision, or no mem */ diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c index 7ea925816f79..284a9b820df8 100644 --- a/net/hsr/hsr_framereg.c +++ b/net/hsr/hsr_framereg.c @@ -158,9 +158,10 @@ struct hsr_node *hsr_add_node(struct list_head *node_db, unsigned char addr[], /* Get the hsr_node from which 'skb' was sent. */ -struct hsr_node *hsr_get_node(struct list_head *node_db, struct sk_buff *skb, +struct hsr_node *hsr_get_node(struct hsr_port *port, struct sk_buff *skb, bool is_sup) { + struct list_head *node_db = &port->hsr->node_db; struct hsr_node *node; struct ethhdr *ethhdr; u16 seq_out; @@ -186,7 +187,11 @@ struct hsr_node *hsr_get_node(struct list_head *node_db, struct sk_buff *skb, */ seq_out = hsr_get_skb_sequence_nr(skb) - 1; } else { - WARN_ONCE(1, "%s: Non-HSR frame\n", __func__); + /* this is called also for frames from master port and + * so warn only for non master ports + */ + if (port->type != HSR_PT_MASTER) + WARN_ONCE(1, "%s: Non-HSR frame\n", __func__); seq_out = HSR_SEQNR_START; } diff --git a/net/hsr/hsr_framereg.h b/net/hsr/hsr_framereg.h index 438b40f98f5a..4e04f0e868e9 100644 --- a/net/hsr/hsr_framereg.h +++ b/net/hsr/hsr_framereg.h @@ -18,7 +18,7 @@ struct hsr_node; struct hsr_node *hsr_add_node(struct list_head *node_db, unsigned char addr[], u16 seq_out); -struct hsr_node *hsr_get_node(struct list_head *node_db, struct sk_buff *skb, +struct hsr_node *hsr_get_node(struct hsr_port *port, struct sk_buff *skb, bool is_sup); void hsr_handle_sup_frame(struct sk_buff *skb, struct hsr_node *node_curr, struct hsr_port *port); From 98dbf5af4fdd142f6184dbb4e4164a8d1850d526 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 12 Jun 2017 15:43:03 -0500 Subject: [PATCH 0747/1065] PCI: endpoint: Select CRC32 to fix test build error The PCI endpoint test driver uses crc32_le() so it should select CRC32. Fixes this build error (when CRC32=m): drivers/built-in.o: In function `pci_epf_test_cmd_handler': pci-epf-test.c:(.text+0x2d98d): undefined reference to `crc32_le' Fixes: 349e7a85b25f ("PCI: endpoint: functions: Add an EP function to test PCI") Reported-by: kbuild test robot Signed-off-by: Randy Dunlap Signed-off-by: Bjorn Helgaas Acked-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/functions/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig index 175edad42d2f..2942066607e0 100644 --- a/drivers/pci/endpoint/functions/Kconfig +++ b/drivers/pci/endpoint/functions/Kconfig @@ -5,6 +5,7 @@ config PCI_EPF_TEST tristate "PCI Endpoint Test driver" depends on PCI_ENDPOINT + select CRC32 help Enable this configuration option to enable the test driver for PCI Endpoint. From 2ad50606f847a902303a5364b7cad64bdd6246f6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ondrej=20Mosn=C3=A1=C4=8Dek?= Date: Mon, 5 Jun 2017 17:52:39 +0200 Subject: [PATCH 0748/1065] dm integrity: reject mappings too large for device dm-integrity would successfully create mappings with the number of sectors greater than the provided data sector count. Attempts to read sectors of this mapping that were beyond the provided data sector count would then yield run-time messages of the form "device-mapper: integrity: Too big sector number: ...". Fix this by emitting an error when the requested mapping size is bigger than the provided data sector count. Signed-off-by: Ondrej Mosnacek Acked-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-integrity.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index 7910bfe50da4..4ab10cf718c9 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -3040,6 +3040,11 @@ static int dm_integrity_ctr(struct dm_target *ti, unsigned argc, char **argv) ti->error = "The device is too small"; goto bad; } + if (ti->len > ic->provided_data_sectors) { + r = -EINVAL; + ti->error = "Not enough provided sectors for requested mapping size"; + goto bad; + } if (!buffer_sectors) buffer_sectors = 1; From fa07ab72cbb0d843429e61bf179308aed6cbe0dd Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 11 Jun 2017 00:38:36 +0200 Subject: [PATCH 0749/1065] genirq: Release resources in __setup_irq() error path In case __irq_set_trigger() fails the resources requested via irq_request_resources() are not released. Add the missing release call into the error handling path. Fixes: c1bacbae8192 ("genirq: Provide irq_request/release_resources chip callbacks") Signed-off-by: Heiner Kallweit Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/655538f5-cb20-a892-ff15-fbd2dd1fa4ec@gmail.com --- kernel/irq/manage.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 070be980c37a..425170d4439b 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1312,8 +1312,10 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) ret = __irq_set_trigger(desc, new->flags & IRQF_TRIGGER_MASK); - if (ret) + if (ret) { + irq_release_resources(desc); goto out_mask; + } } desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \ From 6964e53f55837b0c49ed60d36656d2e0ee4fc27b Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 12 Jun 2017 15:38:36 -0700 Subject: [PATCH 0750/1065] i40e: fix handling of HW ATR eviction A recent commit to refactor the driver and remove the hw_disabled_flags field accidentally introduced two regressions. First, we overwrote pf->flags which removed various key flags including the MSI-X settings. Additionally, it was intended that we have now two flags, HW_ATR_EVICT_CAPABLE and HW_ATR_EVICT_ENABLED, but this was not done, and we accidentally were mis-using HW_ATR_EVICT_CAPABLE everywhere. This patch adds the missing piece, HW_ATR_EVICT_ENABLED, and safely updates pf->flags instead of overwriting it. Without this patch we will have many problems including disabling MSI-X support, and we'll attempt to use HW ATR eviction on devices which do not support it. Fixes: 47994c119a36 ("i40e: remove hw_disabled_flags in favor of using separate flag bits", 2017-04-19) Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e.h | 1 + drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 4 ++-- drivers/net/ethernet/intel/i40e/i40e_main.c | 7 ++++--- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++-- 4 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index cdde3cc28fb5..44d9610f7a15 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -399,6 +399,7 @@ struct i40e_pf { #define I40E_FLAG_RX_CSUM_ENABLED BIT_ULL(1) #define I40E_FLAG_MSI_ENABLED BIT_ULL(2) #define I40E_FLAG_MSIX_ENABLED BIT_ULL(3) +#define I40E_FLAG_HW_ATR_EVICT_ENABLED BIT_ULL(4) #define I40E_FLAG_RSS_ENABLED BIT_ULL(6) #define I40E_FLAG_VMDQ_ENABLED BIT_ULL(7) #define I40E_FLAG_IWARP_ENABLED BIT_ULL(10) diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 7a8eb486b9ea..894c8e57ba00 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -224,7 +224,7 @@ static const struct i40e_priv_flags i40e_gstrings_priv_flags[] = { I40E_PRIV_FLAG("LinkPolling", I40E_FLAG_LINK_POLLING_ENABLED, 0), I40E_PRIV_FLAG("flow-director-atr", I40E_FLAG_FD_ATR_ENABLED, 0), I40E_PRIV_FLAG("veb-stats", I40E_FLAG_VEB_STATS_ENABLED, 0), - I40E_PRIV_FLAG("hw-atr-eviction", I40E_FLAG_HW_ATR_EVICT_CAPABLE, 0), + I40E_PRIV_FLAG("hw-atr-eviction", I40E_FLAG_HW_ATR_EVICT_ENABLED, 0), I40E_PRIV_FLAG("legacy-rx", I40E_FLAG_LEGACY_RX, 0), }; @@ -4092,7 +4092,7 @@ flags_complete: /* Only allow ATR evict on hardware that is capable of handling it */ if (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE) - pf->flags &= ~I40E_FLAG_HW_ATR_EVICT_CAPABLE; + pf->flags &= ~I40E_FLAG_HW_ATR_EVICT_ENABLED; if (changed_flags & I40E_FLAG_TRUE_PROMISC_SUPPORT) { u16 sw_flags = 0, valid_flags = 0; diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 150caf6ca2b4..a7a4b28b4144 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -8821,11 +8821,12 @@ static int i40e_sw_init(struct i40e_pf *pf) (pf->hw.aq.api_min_ver > 4))) { /* Supported in FW API version higher than 1.4 */ pf->flags |= I40E_FLAG_GENEVE_OFFLOAD_CAPABLE; - pf->flags = I40E_FLAG_HW_ATR_EVICT_CAPABLE; - } else { - pf->flags = I40E_FLAG_HW_ATR_EVICT_CAPABLE; } + /* Enable HW ATR eviction if possible */ + if (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE) + pf->flags |= I40E_FLAG_HW_ATR_EVICT_ENABLED; + pf->eeprom_version = 0xDEAD; pf->lan_veb = I40E_NO_VEB; pf->lan_vsi = I40E_NO_VSI; diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index cd894f4023b1..77115c25d96f 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2341,7 +2341,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb, /* Due to lack of space, no more new filters can be programmed */ if (th->syn && (pf->flags & I40E_FLAG_FD_ATR_AUTO_DISABLED)) return; - if (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE) { + if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) { /* HW ATR eviction will take care of removing filters on FIN * and RST packets. */ @@ -2403,7 +2403,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb, I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) & I40E_TXD_FLTR_QW1_CNTINDEX_MASK; - if (pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE) + if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) dtype_cmd |= I40E_TXD_FLTR_QW1_ATR_MASK; fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype); From ca8efa1df1d15a1795a2da57f9f6aada6ed6b946 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 6 Jun 2017 16:47:22 +1000 Subject: [PATCH 0751/1065] KVM: PPC: Book3S HV: Context-switch EBB registers properly This adds code to save the values of three SPRs (special-purpose registers) used by userspace to control event-based branches (EBBs), which are essentially interrupts that get delivered directly to userspace. These registers are loaded up with guest values when entering the guest, and their values are saved when exiting the guest, but we were not saving the host values and restoring them before going back to userspace. On POWER8 this would only affect userspace programs which explicitly request the use of EBBs and also use the KVM_RUN ioctl, since the only source of EBBs on POWER8 is the PMU, and there is an explicit enable bit in the PMU registers (and those PMU registers do get properly context-switched between host and guest). On POWER9 there is provision for externally-generated EBBs, and these are not subject to the control in the PMU registers. Since these registers only affect userspace, we can save them when we first come in from userspace and restore them before returning to userspace, rather than saving/restoring the host values on every guest entry/exit. Similarly, we don't need to worry about their values on offline secondary threads since they execute in the context of the idle task, which never executes in userspace. Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_hv.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 42b7a4fd57d9..400a5992b121 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -2907,6 +2907,7 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu) { int r; int srcu_idx; + unsigned long ebb_regs[3] = {}; /* shut up GCC */ if (!vcpu->arch.sane) { run->exit_reason = KVM_EXIT_INTERNAL_ERROR; @@ -2934,6 +2935,13 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu) flush_all_to_thread(current); + /* Save userspace EBB register values */ + if (cpu_has_feature(CPU_FTR_ARCH_207S)) { + ebb_regs[0] = mfspr(SPRN_EBBHR); + ebb_regs[1] = mfspr(SPRN_EBBRR); + ebb_regs[2] = mfspr(SPRN_BESCR); + } + vcpu->arch.wqp = &vcpu->arch.vcore->wq; vcpu->arch.pgdir = current->mm->pgd; vcpu->arch.state = KVMPPC_VCPU_BUSY_IN_HOST; @@ -2960,6 +2968,13 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu) } } while (is_kvmppc_resume_guest(r)); + /* Restore userspace EBB register values */ + if (cpu_has_feature(CPU_FTR_ARCH_207S)) { + mtspr(SPRN_EBBHR, ebb_regs[0]); + mtspr(SPRN_EBBRR, ebb_regs[1]); + mtspr(SPRN_BESCR, ebb_regs[2]); + } + out: vcpu->arch.state = KVMPPC_VCPU_NOTREADY; atomic_dec(&vcpu->kvm->arch.vcpus_running); From d9ee35acfabbc909c3be4360cd5655a006628b2e Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Mon, 12 Jun 2017 09:21:30 +0200 Subject: [PATCH 0752/1065] x86/mm: Disable 1GB direct mappings when disabling 2MB mappings The kmemleak and debug_pagealloc features both disable using huge pages for direct mappings so they can do cpa() on page level granularity in any context. However they only do that for 2MB pages, which means 1GB pages can still be used if the CPU supports it, unless disabled by a boot param, which is non-obvious. Disable also 1GB pages when disabling 2MB pages. Signed-off-by: Vlastimil Babka Cc: Christian Borntraeger Cc: Linus Torvalds Cc: Pekka Enberg Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Vegard Nossum Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/2be70c78-6130-855d-3dfa-d87bd1dd4fda@suse.cz Signed-off-by: Ingo Molnar --- arch/x86/mm/init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index cbc87ea98751..9b3f9fa5b283 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -161,16 +161,16 @@ static int page_size_mask; static void __init probe_page_size_mask(void) { -#if !defined(CONFIG_KMEMCHECK) /* * For CONFIG_KMEMCHECK or pagealloc debugging, identity mapping will * use small pages. * This will simplify cpa(), which otherwise needs to support splitting * large pages into small in interrupt context, etc. */ - if (boot_cpu_has(X86_FEATURE_PSE) && !debug_pagealloc_enabled()) + if (boot_cpu_has(X86_FEATURE_PSE) && !debug_pagealloc_enabled() && !IS_ENABLED(CONFIG_KMEMCHECK)) page_size_mask |= 1 << PG_LEVEL_2M; -#endif + else + direct_gbpages = 0; /* Enable PSE if available */ if (boot_cpu_has(X86_FEATURE_PSE)) From 023f108dcc187e34ef864bf10ed966cf25e14e2a Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 7 Jun 2017 16:48:19 -0400 Subject: [PATCH 0753/1065] selinux: fix double free in selinux_parse_opts_str() This patch is based on a discussion generated by an earlier patch from Tetsuo Handa: * https://marc.info/?t=149035659300001&r=1&w=2 The double free problem involves the mnt_opts field of the security_mnt_opts struct, selinux_parse_opts_str() frees the memory on error, but doesn't set the field to NULL so if the caller later attempts to call security_free_mnt_opts() we trigger the problem. In order to play it safe we change selinux_parse_opts_str() to call security_free_mnt_opts() on error instead of free'ing the memory directly. This should ensure that everything is handled correctly, regardless of what the caller may do. Fixes: e0007529893c1c06 ("LSM/SELinux: Interfaces to allow FS to control mount options") Cc: stable@vger.kernel.org Cc: Tetsuo Handa Reported-by: Dmitry Vyukov Signed-off-by: Paul Moore Signed-off-by: James Morris --- security/selinux/hooks.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index e67a526d1f30..819fd6858b49 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1106,10 +1106,8 @@ static int selinux_parse_opts_str(char *options, opts->mnt_opts_flags = kcalloc(NUM_SEL_MNT_OPTS, sizeof(int), GFP_KERNEL); - if (!opts->mnt_opts_flags) { - kfree(opts->mnt_opts); + if (!opts->mnt_opts_flags) goto out_err; - } if (fscontext) { opts->mnt_opts[num_mnt_opts] = fscontext; @@ -1132,6 +1130,7 @@ static int selinux_parse_opts_str(char *options, return 0; out_err: + security_free_mnt_opts(opts); kfree(context); kfree(defcontext); kfree(fscontext); From 9a775e0308b575e3a17c66a586ed049b07f48199 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 8 Jun 2017 17:40:01 +0300 Subject: [PATCH 0754/1065] drm/i915: Fix scaling check for 90/270 degree plane rotation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Starting from commit b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") we've already rotated the src coordinates by 270 degrees by the time we check if a scaler is needed or not, so we must not account for the rotation a second time. Previously we did these steps in the opposite order and hence the scaler check had to deal with rotation itself. The double rotation handling causes us to enable a scaler pretty much every time 90/270 degree plane rotation is requested, leading to fuzzier fonts and whatnot. v2: s/unsigned/unsigned int/ to appease checkpatch v3: s/DRM_ROTATE_0/DRM_MODE_ROTATE_0/ Cc: stable@vger.kernel.org Cc: Tvrtko Ursulin Reported-by: Tvrtko Ursulin Tested-by: Tvrtko Ursulin Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-2-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst (cherry picked from commit d96a7d2adb040a67e163a82dad6316f9f572498a) Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/20170608144002.1605-1-ville.syrjala@linux.intel.com --- drivers/gpu/drm/i915/intel_display.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 569717a12723..96b0b01677e2 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4598,7 +4598,7 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe) static int skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach, - unsigned scaler_user, int *scaler_id, unsigned int rotation, + unsigned int scaler_user, int *scaler_id, int src_w, int src_h, int dst_w, int dst_h) { struct intel_crtc_scaler_state *scaler_state = @@ -4607,9 +4607,12 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach, to_intel_crtc(crtc_state->base.crtc); int need_scaling; - need_scaling = drm_rotation_90_or_270(rotation) ? - (src_h != dst_w || src_w != dst_h): - (src_w != dst_w || src_h != dst_h); + /* + * Src coordinates are already rotated by 270 degrees for + * the 90/270 degree plane rotation cases (to match the + * GTT mapping), hence no need to account for rotation here. + */ + need_scaling = src_w != dst_w || src_h != dst_h; /* * if plane is being disabled or scaler is no more required or force detach @@ -4671,7 +4674,7 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state) const struct drm_display_mode *adjusted_mode = &state->base.adjusted_mode; return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX, - &state->scaler_state.scaler_id, DRM_ROTATE_0, + &state->scaler_state.scaler_id, state->pipe_src_w, state->pipe_src_h, adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay); } @@ -4700,7 +4703,6 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state, ret = skl_update_scaler(crtc_state, force_detach, drm_plane_index(&intel_plane->base), &plane_state->scaler_id, - plane_state->base.rotation, drm_rect_width(&plane_state->base.src) >> 16, drm_rect_height(&plane_state->base.src) >> 16, drm_rect_width(&plane_state->base.dst), From 1c2d6bbf0433ddf7c978ac5f2bd582e9e7d34687 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 8 Jun 2017 17:40:02 +0300 Subject: [PATCH 0755/1065] drm/i915: Fix SKL+ watermarks for 90/270 rotation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit skl_check_plane_surface() already rotates the clipped plane source coordinates to match the scanout direction because that's the way the GTT mapping is set up. Thus we no longer need to rotate the coordinates in the watermark code. For cursors we use the non-clipped coordinates which are not rotated appropriately, but that doesn't actually matter since cursors don't even support 90/270 degree rotation. v2: Resolve conflicts from SKL+ wm rework Cc: stable@vger.kernel.org Cc: Tvrtko Ursulin Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-3-ville.syrjala@linux.intel.com Tested-by: Tvrtko Ursulin Reviewed-by: Maarten Lankhorst (cherry picked from commit fce5adf568abb1e8264d677156e2e0deb529194d) Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/20170608144002.1605-2-ville.syrjala@linux.intel.com --- drivers/gpu/drm/i915/intel_pm.c | 36 ++++++++++++++++++++++----------- 1 file changed, 24 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 2ca481b5aa69..078fd1bfa5ea 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3373,20 +3373,26 @@ skl_plane_downscale_amount(const struct intel_crtc_state *cstate, /* n.b., src is 16.16 fixed point, dst is whole integer */ if (plane->id == PLANE_CURSOR) { + /* + * Cursors only support 0/180 degree rotation, + * hence no need to account for rotation here. + */ src_w = pstate->base.src_w; src_h = pstate->base.src_h; dst_w = pstate->base.crtc_w; dst_h = pstate->base.crtc_h; } else { + /* + * Src coordinates are already rotated by 270 degrees for + * the 90/270 degree plane rotation cases (to match the + * GTT mapping), hence no need to account for rotation here. + */ src_w = drm_rect_width(&pstate->base.src); src_h = drm_rect_height(&pstate->base.src); dst_w = drm_rect_width(&pstate->base.dst); dst_h = drm_rect_height(&pstate->base.dst); } - if (drm_rotation_90_or_270(pstate->base.rotation)) - swap(dst_w, dst_h); - downscale_h = max(src_h / dst_h, (uint32_t)DRM_PLANE_HELPER_NO_SCALING); downscale_w = max(src_w / dst_w, (uint32_t)DRM_PLANE_HELPER_NO_SCALING); @@ -3417,12 +3423,14 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate, if (y && format != DRM_FORMAT_NV12) return 0; + /* + * Src coordinates are already rotated by 270 degrees for + * the 90/270 degree plane rotation cases (to match the + * GTT mapping), hence no need to account for rotation here. + */ width = drm_rect_width(&intel_pstate->base.src) >> 16; height = drm_rect_height(&intel_pstate->base.src) >> 16; - if (drm_rotation_90_or_270(pstate->rotation)) - swap(width, height); - /* for planar format */ if (format == DRM_FORMAT_NV12) { if (y) /* y-plane data rate */ @@ -3505,12 +3513,14 @@ skl_ddb_min_alloc(const struct drm_plane_state *pstate, fb->modifier != I915_FORMAT_MOD_Yf_TILED) return 8; + /* + * Src coordinates are already rotated by 270 degrees for + * the 90/270 degree plane rotation cases (to match the + * GTT mapping), hence no need to account for rotation here. + */ src_w = drm_rect_width(&intel_pstate->base.src) >> 16; src_h = drm_rect_height(&intel_pstate->base.src) >> 16; - if (drm_rotation_90_or_270(pstate->rotation)) - swap(src_w, src_h); - /* Halve UV plane width and height for NV12 */ if (fb->format->format == DRM_FORMAT_NV12 && !y) { src_w /= 2; @@ -3794,13 +3804,15 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, width = intel_pstate->base.crtc_w; height = intel_pstate->base.crtc_h; } else { + /* + * Src coordinates are already rotated by 270 degrees for + * the 90/270 degree plane rotation cases (to match the + * GTT mapping), hence no need to account for rotation here. + */ width = drm_rect_width(&intel_pstate->base.src) >> 16; height = drm_rect_height(&intel_pstate->base.src) >> 16; } - if (drm_rotation_90_or_270(pstate->rotation)) - swap(width, height); - cpp = fb->format->cpp[0]; plane_pixel_rate = skl_adjusted_plane_pixel_rate(cstate, intel_pstate); From c380f681245d7ae57f17d9ebbbe8f8f1557ee1fb Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 9 Jun 2017 15:48:05 +0800 Subject: [PATCH 0756/1065] drm/i915: Fix GVT-g PVINFO version compatibility check Current it's strictly checked if PVINFO version matches 1.0 for GVT-g i915 guest which doesn't help for compatibility at all and forces GVT-g host can't extend PVINFO easily with version bump for real compatibility check. This fixes that to check minimal required PVINFO version instead. v2: - drop unneeded version macro - use only major version for sanity check v3: - fix up PVInfo value with kernel type - one indent fix Reviewed-by: Joonas Lahtinen Cc: Chuanxiao Dong Cc: Joonas Lahtinen Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Zhenyu Wang Signed-off-by: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/20170609074805.5101-1-zhenyuw@linux.intel.com (cherry picked from commit 0c8792d00d38de85b6ceb1dd67d3ee009d7c8e42) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_pvinfo.h | 8 ++------ drivers/gpu/drm/i915/i915_vgpu.c | 10 ++++------ 2 files changed, 6 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_pvinfo.h b/drivers/gpu/drm/i915/i915_pvinfo.h index c0cb2974caac..2cfe96d3e5d1 100644 --- a/drivers/gpu/drm/i915/i915_pvinfo.h +++ b/drivers/gpu/drm/i915/i915_pvinfo.h @@ -36,10 +36,6 @@ #define VGT_VERSION_MAJOR 1 #define VGT_VERSION_MINOR 0 -#define INTEL_VGT_IF_VERSION_ENCODE(major, minor) ((major) << 16 | (minor)) -#define INTEL_VGT_IF_VERSION \ - INTEL_VGT_IF_VERSION_ENCODE(VGT_VERSION_MAJOR, VGT_VERSION_MINOR) - /* * notifications from guest to vgpu device model */ @@ -55,8 +51,8 @@ enum vgt_g2v_type { struct vgt_if { u64 magic; /* VGT_MAGIC */ - uint16_t version_major; - uint16_t version_minor; + u16 version_major; + u16 version_minor; u32 vgt_id; /* ID of vGT instance */ u32 rsv1[12]; /* pad to offset 0x40 */ /* diff --git a/drivers/gpu/drm/i915/i915_vgpu.c b/drivers/gpu/drm/i915/i915_vgpu.c index 4ab8a973b61f..2e739018fb4c 100644 --- a/drivers/gpu/drm/i915/i915_vgpu.c +++ b/drivers/gpu/drm/i915/i915_vgpu.c @@ -60,8 +60,8 @@ */ void i915_check_vgpu(struct drm_i915_private *dev_priv) { - uint64_t magic; - uint32_t version; + u64 magic; + u16 version_major; BUILD_BUG_ON(sizeof(struct vgt_if) != VGT_PVINFO_SIZE); @@ -69,10 +69,8 @@ void i915_check_vgpu(struct drm_i915_private *dev_priv) if (magic != VGT_MAGIC) return; - version = INTEL_VGT_IF_VERSION_ENCODE( - __raw_i915_read16(dev_priv, vgtif_reg(version_major)), - __raw_i915_read16(dev_priv, vgtif_reg(version_minor))); - if (version != INTEL_VGT_IF_VERSION) { + version_major = __raw_i915_read16(dev_priv, vgtif_reg(version_major)); + if (version_major < VGT_VERSION_MAJOR) { DRM_INFO("VGT interface version mismatch!\n"); return; } From 769dc04db3ed8484798aceb015b94deacc2ba557 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 8 Jun 2017 14:00:49 +0300 Subject: [PATCH 0757/1065] mac80211: don't look at the PM bit of BAR frames When a peer sends a BAR frame with PM bit clear, we should not modify its PM state as madated by the spec in 802.11-20012 10.2.1.2. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1f75280ba26c..3674fe3d67dc 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1613,12 +1613,16 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) */ if (!ieee80211_hw_check(&sta->local->hw, AP_LINK_PS) && !ieee80211_has_morefrags(hdr->frame_control) && + !ieee80211_is_back_req(hdr->frame_control) && !(status->rx_flags & IEEE80211_RX_DEFERRED_RELEASE) && (rx->sdata->vif.type == NL80211_IFTYPE_AP || rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && - /* PM bit is only checked in frames where it isn't reserved, + /* + * PM bit is only checked in frames where it isn't reserved, * in AP mode it's reserved in non-bufferable management frames * (cf. IEEE 802.11-2012 8.2.4.1.7 Power Management field) + * BAR frames should be ignored as specified in + * IEEE 802.11-2012 10.2.1.2. */ (!ieee80211_is_mgmt(hdr->frame_control) || ieee80211_is_bufferable_mmpdu(hdr->frame_control))) { From 204a7dbcb27bc4b461f42d7f96fdc875eb677f2f Mon Sep 17 00:00:00 2001 From: Avraham Stern Date: Mon, 12 Jun 2017 10:44:58 +0300 Subject: [PATCH 0758/1065] mac80211: Fix incorrect condition when checking rx timestamp If the driver reports the rx timestamp at PLCP start, mac80211 can only handle legacy encoding, but the code checks that the encoding is not legacy. Fix this. Fixes: da6a4352e7c8 ("mac80211: separate encoding/bandwidth from flags") Signed-off-by: Avraham Stern Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 665501ac358f..5e002f62c235 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1531,7 +1531,7 @@ ieee80211_have_rx_timestamp(struct ieee80211_rx_status *status) return true; /* can't handle non-legacy preamble yet */ if (status->flag & RX_FLAG_MACTIME_PLCP_START && - status->encoding != RX_ENC_LEGACY) + status->encoding == RX_ENC_LEGACY) return true; return false; } From 44f6d42cbd6e4c1d4d25f19502dd5f27aedf89d4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 10 Jun 2017 13:52:44 +0300 Subject: [PATCH 0759/1065] mac80211: remove 5/10 MHz rate code from station MLME There's no need for the station MLME code to handle bitrates for 5 or 10 MHz channels when it can't ever create such a configuration. Remove the unnecessary code. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 24 +++--------------------- 1 file changed, 3 insertions(+), 21 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 0ea9712bd99e..2f46db7d3afc 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -601,7 +601,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) struct ieee80211_supported_band *sband; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; - u32 rate_flags, rates = 0; + u32 rates = 0; sdata_assert_lock(sdata); @@ -612,7 +612,6 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) return; } chan = chanctx_conf->def.chan; - rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def); rcu_read_unlock(); sband = local->hw.wiphy->bands[chan->band]; shift = ieee80211_vif_get_shift(&sdata->vif); @@ -636,9 +635,6 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) */ rates_len = 0; for (i = 0; i < sband->n_bitrates; i++) { - if ((rate_flags & sband->bitrates[i].flags) - != rate_flags) - continue; rates |= BIT(i); rates_len++; } @@ -2818,7 +2814,7 @@ static void ieee80211_get_rates(struct ieee80211_supported_band *sband, u32 *rates, u32 *basic_rates, bool *have_higher_than_11mbit, int *min_rate, int *min_rate_index, - int shift, u32 rate_flags) + int shift) { int i, j; @@ -2846,8 +2842,6 @@ static void ieee80211_get_rates(struct ieee80211_supported_band *sband, int brate; br = &sband->bitrates[j]; - if ((rate_flags & br->flags) != rate_flags) - continue; brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5); if (brate == rate) { @@ -4411,27 +4405,15 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, u32 rates = 0, basic_rates = 0; bool have_higher_than_11mbit; int min_rate = INT_MAX, min_rate_index = -1; - struct ieee80211_chanctx_conf *chanctx_conf; const struct cfg80211_bss_ies *ies; int shift = ieee80211_vif_get_shift(&sdata->vif); - u32 rate_flags; - - rcu_read_lock(); - chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); - if (WARN_ON(!chanctx_conf)) { - rcu_read_unlock(); - sta_info_free(local, new_sta); - return -EINVAL; - } - rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def); - rcu_read_unlock(); ieee80211_get_rates(sband, bss->supp_rates, bss->supp_rates_len, &rates, &basic_rates, &have_higher_than_11mbit, &min_rate, &min_rate_index, - shift, rate_flags); + shift); /* * This used to be a workaround for basic rates missing From c87905bec5dad66aa6bb43d11502cafdb33e07db Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 10 Jun 2017 13:52:43 +0300 Subject: [PATCH 0760/1065] mac80211: set bss_info data before configuring the channel When mac80211 changes the channel, it also calls into the driver's bss_info_changed() callback, e.g. with BSS_CHANGED_IDLE. The driver may, like iwlwifi does, access more data from bss_info in that case and iwlwifi accesses the basic_rates bitmap, but if changing from a band with more (basic) rates to one with fewer, an out-of-bounds access of the rate array may result. While we can't avoid having invalid data at some point in time, we can avoid having it while we call the driver - so set up all the data before configuring the channel, and then apply it afterwards. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195677 Reported-by: Johannes Hirte Tested-by: Johannes Hirte Debugged-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 38 ++++++++++++++++++++++++++++---------- 1 file changed, 28 insertions(+), 10 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 2f46db7d3afc..cc8e6ea1b27e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4392,15 +4392,19 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, return -ENOMEM; } - if (new_sta || override) { - err = ieee80211_prep_channel(sdata, cbss); - if (err) { - if (new_sta) - sta_info_free(local, new_sta); - return -EINVAL; - } - } - + /* + * Set up the information for the new channel before setting the + * new channel. We can't - completely race-free - change the basic + * rates bitmap and the channel (sband) that it refers to, but if + * we set it up before we at least avoid calling into the driver's + * bss_info_changed() method with invalid information (since we do + * call that from changing the channel - only for IDLE and perhaps + * some others, but ...). + * + * So to avoid that, just set up all the new information before the + * channel, but tell the driver to apply it only afterwards, since + * it might need the new channel for that. + */ if (new_sta) { u32 rates = 0, basic_rates = 0; bool have_higher_than_11mbit; @@ -4471,8 +4475,22 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, sdata->vif.bss_conf.sync_dtim_count = 0; } rcu_read_unlock(); + } - /* tell driver about BSSID, basic rates and timing */ + if (new_sta || override) { + err = ieee80211_prep_channel(sdata, cbss); + if (err) { + if (new_sta) + sta_info_free(local, new_sta); + return -EINVAL; + } + } + + if (new_sta) { + /* + * tell driver about BSSID, basic rates and timing + * this was set up above, before setting the channel + */ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES | BSS_CHANGED_BEACON_INT); From 98c67d187db7808b1f3c95f2110dd4392d034182 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Sat, 10 Jun 2017 04:59:12 +0200 Subject: [PATCH 0761/1065] mac80211/wpa: use constant time memory comparison for MACs Otherwise, we enable all sorts of forgeries via timing attack. Signed-off-by: Jason A. Donenfeld Cc: Johannes Berg Cc: linux-wireless@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/mac80211/wpa.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index c1ef22df865f..cc19614ff4e6 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "ieee80211_i.h" #include "michael.h" @@ -153,7 +154,7 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx) data_len = skb->len - hdrlen - MICHAEL_MIC_LEN; key = &rx->key->conf.key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY]; michael_mic(key, hdr, data, data_len, mic); - if (memcmp(mic, data + data_len, MICHAEL_MIC_LEN) != 0) + if (crypto_memneq(mic, data + data_len, MICHAEL_MIC_LEN)) goto mic_fail; /* remove Michael MIC from payload */ @@ -1048,7 +1049,7 @@ ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx) bip_aad(skb, aad); ieee80211_aes_cmac(key->u.aes_cmac.tfm, aad, skb->data + 24, skb->len - 24, mic); - if (memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) { + if (crypto_memneq(mic, mmie->mic, sizeof(mmie->mic))) { key->u.aes_cmac.icverrors++; return RX_DROP_UNUSABLE; } @@ -1098,7 +1099,7 @@ ieee80211_crypto_aes_cmac_256_decrypt(struct ieee80211_rx_data *rx) bip_aad(skb, aad); ieee80211_aes_cmac_256(key->u.aes_cmac.tfm, aad, skb->data + 24, skb->len - 24, mic); - if (memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) { + if (crypto_memneq(mic, mmie->mic, sizeof(mmie->mic))) { key->u.aes_cmac.icverrors++; return RX_DROP_UNUSABLE; } @@ -1202,7 +1203,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx) if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce, skb->data + 24, skb->len - 24, mic) < 0 || - memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) { + crypto_memneq(mic, mmie->mic, sizeof(mmie->mic))) { key->u.aes_gmac.icverrors++; return RX_DROP_UNUSABLE; } From b3dd8279659f14f3624bb32559782d699fa6f7d1 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sat, 10 Jun 2017 13:52:45 +0300 Subject: [PATCH 0762/1065] mac80211: don't send SMPS action frame in AP mode when not needed mac80211 allows to modify the SMPS state of an AP both, when it is started, and after it has been started. Such a change will trigger an action frame to all the peers that are currently connected, and will be remembered so that new peers will get notified as soon as they connect (since the SMPS setting in the beacon may not be the right one). This means that we need to remember the SMPS state currently requested as well as the SMPS state that was configured initially (and advertised in the beacon). The former is bss->req_smps and the latter is sdata->smps_mode. Initially, the AP interface could only be started with SMPS_OFF, which means that sdata->smps_mode was SMPS_OFF always. Later, a nl80211 API was added to be able to start an AP with a different AP mode. That code forgot to update bss->req_smps and because of that, if the AP interface was started with SMPS_DYNAMIC, we had: sdata->smps_mode = SMPS_DYNAMIC bss->req_smps = SMPS_OFF That configuration made mac80211 think it needs to fire off an action frame to any new station connecting to the AP in order to let it know that the actual SMPS configuration is SMPS_OFF. Fix that by properly setting bss->req_smps in ieee80211_start_ap. Fixes: f69931748730 ("mac80211: set smps_mode according to ap params") Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 6c2e6060cd54..4a388fe8c2d1 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -902,6 +902,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, default: return -EINVAL; } + sdata->u.ap.req_smps = sdata->smps_mode; + sdata->needed_rx_chains = sdata->local->rx_chains; sdata->vif.bss_conf.beacon_int = params->beacon_interval; From 0ca4cd7bccf0b82d2c10069f295772bb7b76d006 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 9 Jun 2017 13:15:37 +0200 Subject: [PATCH 0763/1065] HID: let generic driver yield control iff specific driver has been enabled There are many situations where generic HID driver provides some basic level of support for certain device, but later this support (usually by implementing vendor-specific extensions of HID protocol) is extended and the support moved over to a separate (usually per-vendor) specific driver. This might bring a rather unpleasant suprise for users, as all of a sudden there is a new config option they have to enable in order to get any support for their device whatsoever, although previous kernel versions provided basic support through the generic driver. Which is rightfully seen as a regression. Fix this by including the entry for a particular device in hid_have_special_driver[] iff the specific config option has been specified, and let generic driver handle the device otherwise. Also make the behavior of hid_scan_report() (where the same decision is being taken on a per-report level) consistent. While at it, reshuffle the hid_have_special_driver[] a bit to restore the alphabetical ordering (first order by config option, and within those sections order by VID). This is considered a short-term solution, before generic way of giving precedence to special drivers and falling back to generic driver is figured out. While at it, fixup a missing entry for GFRM driver; thanks to Hans de Geode for spotting this (and for discovering a few issues in the conversion). Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 282 ++++++++++++++++++++++++++++++++--------- 1 file changed, 221 insertions(+), 61 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 04cee65531d7..6e040692f1d8 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -826,11 +826,35 @@ static int hid_scan_report(struct hid_device *hid) * hid-rmi should take care of them, * not hid-generic */ - if (IS_ENABLED(CONFIG_HID_RMI)) - hid->group = HID_GROUP_RMI; + hid->group = HID_GROUP_RMI; break; } + /* fall back to generic driver in case specific driver doesn't exist */ + switch (hid->group) { + case HID_GROUP_MULTITOUCH_WIN_8: + /* fall-through */ + case HID_GROUP_MULTITOUCH: + if (!IS_ENABLED(CONFIG_HID_MULTITOUCH)) + hid->group = HID_GROUP_GENERIC; + break; + case HID_GROUP_SENSOR_HUB: + if (!IS_ENABLED(CONFIG_HID_SENSOR_HUB)) + hid->group = HID_GROUP_GENERIC; + break; + case HID_GROUP_RMI: + if (!IS_ENABLED(CONFIG_HID_RMI)) + hid->group = HID_GROUP_GENERIC; + break; + case HID_GROUP_WACOM: + if (!IS_ENABLED(CONFIG_HID_WACOM)) + hid->group = HID_GROUP_GENERIC; + break; + case HID_GROUP_LOGITECH_DJ_DEVICE: + if (!IS_ENABLED(CONFIG_HID_LOGITECH_DJ)) + hid->group = HID_GROUP_GENERIC; + break; + } vfree(parser); return 0; } @@ -1763,15 +1787,23 @@ EXPORT_SYMBOL_GPL(hid_disconnect); * used as a driver. See hid_scan_report(). */ static const struct hid_device_id hid_have_special_driver[] = { +#if IS_ENABLED(CONFIG_HID_A4TECH) { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649) }, +#endif +#if IS_ENABLED(CONFIG_HID_ACCUTOUCH) + { HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_ACCUTOUCH_2216) }, +#endif +#if IS_ENABLED(CONFIG_HID_ACRUX) { HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802) }, { HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0xf705) }, +#endif +#if IS_ENABLED(CONFIG_HID_ALPS) { HID_DEVICE(HID_BUS_ANY, HID_GROUP_ANY, USB_VENDOR_ID_ALPS_JP, HID_DEVICE_ID_ALPS_U1_DUAL) }, +#endif +#if IS_ENABLED(CONFIG_HID_APPLE) { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICTRACKPAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) }, @@ -1792,11 +1824,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL2) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL3) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL5) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) }, @@ -1851,62 +1878,100 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, +#endif +#if IS_ENABLED(CONFIG_HID_APPLEIR) + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL3) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL5) }, +#endif +#if IS_ENABLED(CONFIG_HID_ASUS) { HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD) }, { HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_T100_KEYBOARD) }, +#endif +#if IS_ENABLED(CONFIG_HID_AUREAL) { HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) }, +#endif +#if IS_ENABLED(CONFIG_HID_BELKIN) { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, +#endif +#if IS_ENABLED(CONFIG_HID_BETOP_FF) { HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185BFM, 0x2208) }, { HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185PC, 0x5506) }, { HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185V2PC, 0x1850) }, { HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185V2BFM, 0x5500) }, - { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) }, - { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) }, +#endif +#if IS_ENABLED(CONFIG_HID_CHERRY) { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) }, +#endif +#if IS_ENABLED(CONFIG_HID_CHICONY) { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_ACER_SWITCH12) }, + { HID_USB_DEVICE(USB_VENDOR_ID_JESS, USB_DEVICE_ID_JESS_ZEN_AIO_KBD) }, +#endif +#if IS_ENABLED(CONFIG_HID_CMEDIA) + { HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM6533) }, +#endif +#if IS_ENABLED(CONFIG_HID_CORSAIR) { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_K90) }, { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_SCIMITAR_PRO_RGB) }, - { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) }, +#endif +#if IS_ENABLED(CONFIG_HID_CP2112) { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) }, +#endif +#if IS_ENABLED(CONFIG_HID_CYPRESS) { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_4) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) }, - { HID_USB_DEVICE(USB_VENDOR_ID_DELCOM, USB_DEVICE_ID_DELCOM_VISUAL_IND) }, +#endif +#if IS_ENABLED(CONFIG_HID_DRAGONRISE) { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) }, { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) }, -#if IS_ENABLED(CONFIG_HID_MAYFLASH) - { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3) }, - { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR) }, - { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1) }, - { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE2) }, #endif - { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_WN) }, - { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_FA) }, +#if IS_ENABLED(CONFIG_HID_ELECOM) { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRED) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRELESS) }, +#endif +#if IS_ENABLED(CONFIG_HID_ELO) { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_ACCUTOUCH_2216) }, +#endif +#if IS_ENABLED(CONFIG_HID_EMS_FF) { HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) }, +#endif +#if IS_ENABLED(CONFIG_HID_EZKEY) { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, +#endif +#if IS_ENABLED(CONFIG_HID_GEMBIRD) { HID_USB_DEVICE(USB_VENDOR_ID_GEMBIRD, USB_DEVICE_ID_GEMBIRD_JPD_DUALFORCE2) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, +#endif +#if IS_ENABLED(CONFIG_HID_GFRM) + { HID_BLUETOOTH_DEVICE(0x58, 0x2000) }, + { HID_BLUETOOTH_DEVICE(0x471, 0x2210) }, +#endif +#if IS_ENABLED(CONFIG_HID_GREENASIA) { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) }, +#endif +#if IS_ENABLED(CONFIG_HID_GT683R) + { HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) }, +#endif +#if IS_ENABLED(CONFIG_HID_GYRATION) { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) }, +#endif +#if IS_ENABLED(CONFIG_HID_HOLTEK) { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) }, @@ -1915,12 +1980,17 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A072) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A0C2) }, - { HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_TABLET) }, - { HID_USB_DEVICE(USB_VENDOR_ID_JESS, USB_DEVICE_ID_JESS_ZEN_AIO_KBD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_JESS2, USB_DEVICE_ID_JESS2_COLOR_RUMBLE_PAD) }, +#endif +#if IS_ENABLED(CONFIG_HID_ICADE) { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) }, +#endif +#if IS_ENABLED(CONFIG_HID_KENSINGTON) { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, +#endif +#if IS_ENABLED(CONFIG_HID_KEYTOUCH) { HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) }, +#endif +#if IS_ENABLED(CONFIG_HID_KYE) { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_MANTICORE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GX_IMPERATOR) }, @@ -1930,21 +2000,29 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X_V2) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_PENSKETCH_M912) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, +#endif +#if IS_ENABLED(CONFIG_HID_LCPOWER) { HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) }, +#endif +#if IS_ENABLED(CONFIG_HID_LED) + { HID_USB_DEVICE(USB_VENDOR_ID_DELCOM, USB_DEVICE_ID_DELCOM_VISUAL_IND) }, + { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_WN) }, + { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_FA) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_LUXAFOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_RISO_KAGAKU, USB_DEVICE_ID_RI_KA_WEBMAIL) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THINGM, USB_DEVICE_ID_BLINK1) }, +#endif #if IS_ENABLED(CONFIG_HID_LENOVO) { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_CUSBKBD) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_CBTKBD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPPRODOCK) }, #endif - { HID_USB_DEVICE(USB_VENDOR_ID_LG, USB_DEVICE_ID_LG_MELFAS_MT) }, +#if IS_ENABLED(CONFIG_HID_LOGITECH) { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RECEIVER) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_T651) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_DESKTOP) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_MINI) }, @@ -1957,7 +2035,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G29_WHEEL) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) }, @@ -1969,17 +2046,30 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFGT_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL) }, -#if IS_ENABLED(CONFIG_HID_LOGITECH_DJ) - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2) }, -#endif { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) }, - { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, - { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_LUXAFOR) }, +#endif +#if IS_ENABLED(CONFIG_HID_LOGITECH_HIDPP) + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_T651) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL) }, +#endif +#if IS_ENABLED(CONFIG_HID_LOGITECH_DJ) + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2) }, +#endif +#if IS_ENABLED(CONFIG_HID_MAGICMOUSE) + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICTRACKPAD) }, +#endif +#if IS_ENABLED(CONFIG_HID_MAYFLASH) + { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3) }, + { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1) }, + { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE2) }, +#endif +#if IS_ENABLED(CONFIG_HID_MICROSOFT) { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, @@ -1995,9 +2085,22 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_600) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3KV1) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) }, +#endif +#if IS_ENABLED(CONFIG_HID_MONTEREY) { HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) }, - { HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) }, +#endif +#if IS_ENABLED(CONFIG_HID_MULTITOUCH) + { HID_USB_DEVICE(USB_VENDOR_ID_LG, USB_DEVICE_ID_LG_MELFAS_MT) }, +#endif +#if IS_ENABLED(CONFIG_HID_WIIMOTE) + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) }, +#endif +#if IS_ENABLED(CONFIG_HID_NTI) { HID_USB_DEVICE(USB_VENDOR_ID_NTI, USB_DEVICE_ID_USB_SUN) }, +#endif +#if IS_ENABLED(CONFIG_HID_NTRIG) { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1) }, { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2) }, @@ -2017,13 +2120,41 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16) }, { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17) }, { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) }, +#endif +#if IS_ENABLED(CONFIG_HID_ORTEK) { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) }, { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) }, +#endif +#if IS_ENABLED(CONFIG_HID_PANTHERLORD) + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, + { HID_USB_DEVICE(USB_VENDOR_ID_JESS2, USB_DEVICE_ID_JESS2_COLOR_RUMBLE_PAD) }, +#endif +#if IS_ENABLED(CONFIG_HID_PENMOUNT) { HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_6000) }, +#endif +#if IS_ENABLED(CONFIG_HID_PETALYNX) { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, +#endif +#if IS_ENABLED(CONFIG_HID_PICOLCD) + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, +#endif +#if IS_ENABLED(CONFIG_HID_PLANTRONICS) { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) }, +#endif +#if IS_ENABLED(CONFIG_HID_PRIMAX) { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_RISO_KAGAKU, USB_DEVICE_ID_RI_KA_WEBMAIL) }, +#endif +#if IS_ENABLED(CONFIG_HID_PRODIKEYS) + { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) }, +#endif +#if IS_ENABLED(CONFIG_HID_RMI) + { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) }, + { HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14) }, +#endif #if IS_ENABLED(CONFIG_HID_ROCCAT) { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) }, @@ -2051,9 +2182,21 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT5) }, { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9) }, #endif +#if IS_ENABLED(CONFIG_HID_SAMSUNG) { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) }, - { HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) }, +#endif +#if IS_ENABLED(CONFIG_HID_SMARTJOYPLUS) + { HID_USB_DEVICE(USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO) }, +#endif +#if IS_ENABLED(CONFIG_HID_SONY) + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_PS3_BDREMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER) }, @@ -2072,9 +2215,17 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SINO_LITE, USB_DEVICE_ID_SINO_LITE_CONTROLLER) }, +#endif +#if IS_ENABLED(CONFIG_HID_SPEEDLINK) + { HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) }, +#endif +#if IS_ENABLED(CONFIG_HID_STEELSERIES) { HID_USB_DEVICE(USB_VENDOR_ID_STEELSERIES, USB_DEVICE_ID_STEELSERIES_SRWS1) }, +#endif +#if IS_ENABLED(CONFIG_HID_SUNPLUS) { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THINGM, USB_DEVICE_ID_BLINK1) }, +#endif +#if IS_ENABLED(CONFIG_HID_THRUSTMASTER) { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb323) }, @@ -2083,12 +2234,25 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) }, +#endif +#if IS_ENABLED(CONFIG_HID_TIVO) { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) }, { HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) }, { HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_PRO) }, +#endif +#if IS_ENABLED(CONFIG_HID_TOPSEED) + { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) }, +#endif +#if IS_ENABLED(CONFIG_HID_TWINHAN) { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, +#endif +#if IS_ENABLED(CONFIG_HID_UCLOGIC) + { HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_TABLET) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_HUION_TABLET) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) }, @@ -2096,20 +2260,17 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THQ, USB_DEVICE_ID_THQ_PS3_UDRAW) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_YIYNOVA_TABLET) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_81) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_DRAWIMAGE_G3) }, - { HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, USB_DEVICE_ID_UGTIZER_TABLET_GP0610) }, { HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_TABLET_EX07S) }, - { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, - { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) }, - { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, USB_DEVICE_ID_UGTIZER_TABLET_GP0610) }, +#endif +#if IS_ENABLED(CONFIG_HID_UDRAW_PS3) + { HID_USB_DEVICE(USB_VENDOR_ID_THQ, USB_DEVICE_ID_THQ_PS3_UDRAW) }, +#endif +#if IS_ENABLED(CONFIG_HID_WALTOP) { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_Q_PAD) }, @@ -2117,19 +2278,18 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET) }, - { HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) }, +#endif +#if IS_ENABLED(CONFIG_HID_XINMO) { HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_THT_2P_ARCADE) }, +#endif +#if IS_ENABLED(CONFIG_HID_ZEROPLUS) { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, +#endif +#if IS_ENABLED(CONFIG_HID_ZYDACRON) { HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) }, - - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) }, - { HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14) }, - { HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM6533) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) }, +#endif { } }; From 97d8b6e3b8538198aefb0003342920a82e062147 Mon Sep 17 00:00:00 2001 From: Ashwanth Goli Date: Tue, 13 Jun 2017 16:54:55 +0530 Subject: [PATCH 0764/1065] net: rps: fix uninitialized symbol warning This patch fixes uninitialized symbol warning that got introduced by the following commit 773fc8f6e8d6 ("net: rps: send out pending IPI's on CPU hotplug") Signed-off-by: Ashwanth Goli Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 54bb8d99d26a..6d60149287a1 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -8203,7 +8203,7 @@ static int dev_cpu_dead(unsigned int oldcpu) struct sk_buff **list_skb; struct sk_buff *skb; unsigned int cpu; - struct softnet_data *sd, *oldsd, *remsd; + struct softnet_data *sd, *oldsd, *remsd = NULL; local_irq_disable(); cpu = smp_processor_id(); From 459fa246d8fa4a543ed9a3331f15c8fe1caf9937 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Sun, 11 Jun 2017 15:22:10 +1000 Subject: [PATCH 0765/1065] clocksource: Explicitly include linux/clocksource.h when needed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The kbuild test robot reported errors in these files when doing an ia64 allmodconfig build. drivers/clocksource/timer-sun5i.c:52:21: error: field 'clksrc' has incomplete type struct clocksource clksrc; ^~~~~~ drivers/clocksource/cadence_ttc_timer.c:92:21: error: field 'cs' has incomplete type struct clocksource cs; ^~ (and many more errors for these files) Cc: Michal Simek Cc: "Sören Brinkmann" Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Maxime Ripard Cc: Chen-Yu Tsai Reported-by: kbuild test robot Signed-off-by: Stephen Rothwell Acked-by: Michal Simek Signed-off-by: Daniel Lezcano --- drivers/clocksource/cadence_ttc_timer.c | 1 + drivers/clocksource/timer-sun5i.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c index 44e5e951583b..8e64b8460f11 100644 --- a/drivers/clocksource/cadence_ttc_timer.c +++ b/drivers/clocksource/cadence_ttc_timer.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c index 2e9c830ae1cd..c4656c4d44a6 100644 --- a/drivers/clocksource/timer-sun5i.c +++ b/drivers/clocksource/timer-sun5i.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include From eb3c28c15555212227cfa8b9a3baa21ad5982a19 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 12 Jun 2017 13:56:51 +0200 Subject: [PATCH 0766/1065] r8152: give the device version Getting the device version out of the driver really aids debugging. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index ddc62cb69be8..1a419a45e2a2 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -4368,6 +4368,8 @@ static u8 rtl_get_version(struct usb_interface *intf) break; } + dev_dbg(&intf->dev, "Detected version 0x%04x\n", version); + return version; } From c38b7d327aafd1e3ad7ff53eefac990673b65667 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Mon, 12 Jun 2017 09:52:26 -0700 Subject: [PATCH 0767/1065] igmp: acquire pmc lock for ip_mc_clear_src() Andrey reported a use-after-free in add_grec(): for (psf = *psf_list; psf; psf = psf_next) { ... psf_next = psf->sf_next; where the struct ip_sf_list's were already freed by: kfree+0xe8/0x2b0 mm/slub.c:3882 ip_mc_clear_src+0x69/0x1c0 net/ipv4/igmp.c:2078 ip_mc_dec_group+0x19a/0x470 net/ipv4/igmp.c:1618 ip_mc_drop_socket+0x145/0x230 net/ipv4/igmp.c:2609 inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:411 sock_release+0x8d/0x1e0 net/socket.c:597 sock_close+0x16/0x20 net/socket.c:1072 This happens because we don't hold pmc->lock in ip_mc_clear_src() and a parallel mr_ifc_timer timer could jump in and access them. The RCU lock is there but it is merely for pmc itself, this spinlock could actually ensure we don't access them in parallel. Thanks to Eric and Long for discussion on this bug. Reported-by: Andrey Konovalov Cc: Eric Dumazet Cc: Xin Long Signed-off-by: Cong Wang Reviewed-by: Xin Long Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 44fd86de2823..8f6b5bbcbf69 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -2071,21 +2071,26 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode, static void ip_mc_clear_src(struct ip_mc_list *pmc) { - struct ip_sf_list *psf, *nextpsf; + struct ip_sf_list *psf, *nextpsf, *tomb, *sources; - for (psf = pmc->tomb; psf; psf = nextpsf) { - nextpsf = psf->sf_next; - kfree(psf); - } + spin_lock_bh(&pmc->lock); + tomb = pmc->tomb; pmc->tomb = NULL; - for (psf = pmc->sources; psf; psf = nextpsf) { - nextpsf = psf->sf_next; - kfree(psf); - } + sources = pmc->sources; pmc->sources = NULL; pmc->sfmode = MCAST_EXCLUDE; pmc->sfcount[MCAST_INCLUDE] = 0; pmc->sfcount[MCAST_EXCLUDE] = 1; + spin_unlock_bh(&pmc->lock); + + for (psf = tomb; psf; psf = nextpsf) { + nextpsf = psf->sf_next; + kfree(psf); + } + for (psf = sources; psf; psf = nextpsf) { + nextpsf = psf->sf_next; + kfree(psf); + } } /* Join a multicast group From 4a6a97e2650c7dd7b1380ba763e9038c814e220c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 12 Jun 2017 16:39:51 -0700 Subject: [PATCH 0768/1065] netconsole: Remove duplicate "netconsole: " logging prefix It's already added by pr_fmt so remove the explicit use. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 06ee6395117f..0e27920c2b6b 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -358,7 +358,7 @@ static ssize_t enabled_store(struct config_item *item, if (err) goto out_unlock; - pr_info("netconsole: network logging started\n"); + pr_info("network logging started\n"); } else { /* false */ /* We need to disable the netconsole before cleaning it up * otherwise we might end up in write_msg() with From 665fff2923323e348728e03a7cdb0ce56f316d39 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 12 Jun 2017 17:18:51 -0700 Subject: [PATCH 0769/1065] net: phy: Fix MDIO_THUNDER dependencies After commit 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") we could create a configuration where MDIO_DEVICE=y and PHYLIB=m which leads to the following undefined references: drivers/built-in.o: In function `thunder_mdiobus_pci_remove': >> mdio-thunder.c:(.text+0x2a212f): undefined reference to >> `mdiobus_unregister' >> mdio-thunder.c:(.text+0x2a2138): undefined reference to >> `mdiobus_free' drivers/built-in.o: In function `thunder_mdiobus_pci_probe': mdio-thunder.c:(.text+0x2a22e7): undefined reference to `devm_mdiobus_alloc_size' mdio-thunder.c:(.text+0x2a236f): undefined reference to `of_mdiobus_register' Reported-by: kbuild test robot Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Florian Fainelli Tested-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index c360dd6ead22..3ab6c58d4be6 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -127,6 +127,7 @@ config MDIO_THUNDER tristate "ThunderX SOCs MDIO buses" depends on 64BIT depends on PCI + depends on !(MDIO_DEVICE=y && PHYLIB=m) select MDIO_CAVIUM help This driver supports the MDIO interfaces found on Cavium From 60cfe1eaccb8af598ebe1bdc44e157ea30fcdd81 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 13 Jun 2017 19:10:18 +0200 Subject: [PATCH 0770/1065] qmi_wwan: new Telewell and Sierra device IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A new Sierra Wireless EM7305 device ID used in a Toshiba laptop, and two Longcheer device IDs entries used by Telewell TW-3G HSPA+ branded modems. Reported-by: Petr Kloc Reported-by: Teemu Likonen Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 949671ce4039..32a22f4e8356 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1192,6 +1192,8 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x9056, 8)}, /* Sierra Wireless Modem */ {QMI_FIXED_INTF(0x1199, 0x9057, 8)}, {QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */ + {QMI_FIXED_INTF(0x1199, 0x9063, 8)}, /* Sierra Wireless EM7305 */ + {QMI_FIXED_INTF(0x1199, 0x9063, 10)}, /* Sierra Wireless EM7305 */ {QMI_FIXED_INTF(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */ {QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx */ {QMI_FIXED_INTF(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */ @@ -1206,6 +1208,8 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)}, /* Telit LE920, LE920A4 */ + {QMI_FIXED_INTF(0x1c9e, 0x9801, 3)}, /* Telewell TW-3G HSPA+ */ + {QMI_FIXED_INTF(0x1c9e, 0x9803, 4)}, /* Telewell TW-3G HSPA+ */ {QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)}, /* XS Stick W100-2 from 4G Systems */ {QMI_FIXED_INTF(0x0b3c, 0xc000, 4)}, /* Olivetti Olicard 100 */ {QMI_FIXED_INTF(0x0b3c, 0xc001, 4)}, /* Olivetti Olicard 120 */ From ace17c369295f088dc8ac8ff468602646fa5cced Mon Sep 17 00:00:00 2001 From: "Tayar, Tomer" Date: Tue, 13 Jun 2017 12:15:59 +0300 Subject: [PATCH 0771/1065] qed: fix dump of context data Currently when dumping a context data only word number '1' is read for the entire context. Fixes: c965db444629 ("qed: Add support for debug data collection") Signed-off-by: Tomer Tayar Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c index 483241b4b05d..a672f6a860dc 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_debug.c +++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c @@ -2956,7 +2956,7 @@ static u32 qed_grc_dump_ctx_data(struct qed_hwfn *p_hwfn, qed_wr(p_hwfn, p_ptt, s_storm_defs[storm_id].cm_ctx_wr_addr, - BIT(9) | lid); + (i << 9) | lid); *(dump_buf + offset) = qed_rd(p_hwfn, p_ptt, rd_reg_addr); From bf5d008164dd84d671ca2dd569a1676051f9faff Mon Sep 17 00:00:00 2001 From: Priyalee Kushwaha Date: Sat, 3 Jun 2017 10:21:24 -0700 Subject: [PATCH 0772/1065] platform/x86: intel_telemetry_debugfs: fix oops when load/unload module This fixes an oops found while testing load/unload of the intel_telemetry_debugfs module. module_init uses register_pm_notifier for PM callbacks, but unregister_pm_notifier was missing from module_exit. [ 97.481860] BUG: unable to handle kernel paging request at ffffffffa006f010 [ 97.489742] IP: blocking_notifier_chain_register+0x3a/0xa0 [ 97.495898] PGD 2e0a067 [ 97.495899] PUD 2e0b063 [ 97.498737] PMD 179e29067 [ 97.501573] PTE 0 [ 97.508423] Oops: 0000 1 PREEMPT SMP [ 97.512724] Modules linked in: intel_telemetry_debugfs intel_rapl gpio_keys dwc3 udc_core intel_telemetry_pltdrv intel_punit_ipc intel_telemetry_core rtc_cmos efivars x86_pkg_temp_thermal iwlwifi snd_hda_codec_hdmi soc_button_array btusb cfg80211 btrtl mei_me hci_uart btbcm mei btintel i915 bluetooth intel_pmc_ipc snd_hda_intel spi_pxa2xx_platform snd_hda_codec dwc3_pci snd_hda_core tpm_tis tpm_tis_core tpm efivarfs [ 97.558453] CPU: 0 PID: 889 Comm: modprobe Not tainted 4.11.0-rc6-intel-dev-bkc #1 [ 97.566950] Hardware name: Intel Corp. Joule DVT3/SDS, BIOS GTPP181A.X64.0143.B30.1701132137 01/13/2017 [ 97.577518] task: ffff8801793a21c0 task.stack: ffff8801793f0000 [ 97.584162] RIP: 0010:blocking_notifier_chain_register+0x3a/0xa0 [ 97.590903] RSP: 0018:ffff8801793f3c58 EFLAGS: 00010286 [ 97.596802] RAX: ffffffffa006f000 RBX: ffffffff81e3ea20 RCX: 0000000000000000 [ 97.604812] RDX: ffff880179eaf210 RSI: ffffffffa0131000 RDI: ffffffff81e3ea20 [ 97.612821] RBP: ffff8801793f3c68 R08: 0000000000000006 R09: 000000000000005c [ 97.620847] R10: 0000000000000000 R11: 0000000000000006 R12: ffffffffa0131000 [ 97.628855] R13: 0000000000000000 R14: ffff880176e35f48 R15: ffff8801793f3ea8 [ 97.636865] FS: 00007f7eeba07700(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 97.645948] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 97.652423] CR2: ffffffffa006f010 CR3: 00000001775ef000 CR4: 00000000003406f0 [ 97.660423] Call Trace: [ 97.663166] ? 0xffffffffa0031000 [ 97.666885] register_pm_notifier+0x18/0x20 [ 97.671581] telemetry_debugfs_init+0x92/0x1000 Signed-off-by: Priyalee Kushwaha Signed-off-by: Andy Shevchenko Signed-off-by: Darren Hart (VMware) --- drivers/platform/x86/intel_telemetry_debugfs.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel_telemetry_debugfs.c index ef29f18b1951..4cc2f4ea0a25 100644 --- a/drivers/platform/x86/intel_telemetry_debugfs.c +++ b/drivers/platform/x86/intel_telemetry_debugfs.c @@ -97,11 +97,9 @@ } \ } -#ifdef CONFIG_PM_SLEEP static u8 suspend_prep_ok; static u32 suspend_shlw_ctr_temp, suspend_deep_ctr_temp; static u64 suspend_shlw_res_temp, suspend_deep_res_temp; -#endif struct telemetry_susp_stats { u32 shlw_swake_ctr; @@ -807,7 +805,6 @@ static const struct file_operations telem_ioss_trc_verb_ops = { .release = single_release, }; -#ifdef CONFIG_PM_SLEEP static int pm_suspend_prep_cb(void) { struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS]; @@ -937,7 +934,6 @@ static int pm_notification(struct notifier_block *this, static struct notifier_block pm_notifier = { .notifier_call = pm_notification, }; -#endif /* CONFIG_PM_SLEEP */ static int __init telemetry_debugfs_init(void) { @@ -960,14 +956,13 @@ static int __init telemetry_debugfs_init(void) if (err < 0) return -EINVAL; - -#ifdef CONFIG_PM_SLEEP register_pm_notifier(&pm_notifier); -#endif /* CONFIG_PM_SLEEP */ debugfs_conf->telemetry_dbg_dir = debugfs_create_dir("telemetry", NULL); - if (!debugfs_conf->telemetry_dbg_dir) - return -ENOMEM; + if (!debugfs_conf->telemetry_dbg_dir) { + err = -ENOMEM; + goto out_pm; + } f = debugfs_create_file("pss_info", S_IFREG | S_IRUGO, debugfs_conf->telemetry_dbg_dir, NULL, @@ -1014,6 +1009,8 @@ static int __init telemetry_debugfs_init(void) out: debugfs_remove_recursive(debugfs_conf->telemetry_dbg_dir); debugfs_conf->telemetry_dbg_dir = NULL; +out_pm: + unregister_pm_notifier(&pm_notifier); return err; } @@ -1022,6 +1019,7 @@ static void __exit telemetry_debugfs_exit(void) { debugfs_remove_recursive(debugfs_conf->telemetry_dbg_dir); debugfs_conf->telemetry_dbg_dir = NULL; + unregister_pm_notifier(&pm_notifier); } late_initcall(telemetry_debugfs_init); From 4f02b50ece11dcf75263fb7a4cfe8a5df1cfabea Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Fri, 2 Jun 2017 14:17:05 +0200 Subject: [PATCH 0773/1065] leds: bcm6328: fix signal source assignment for leds 4 to 7 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Each nibble represents 4 LEDs, and in case of the higher register, bit 0 represents LED 4, so we need to use modulus for the LED number as well. Fixes: fd7b025a238d0a5440bfa26c585eb78097bf48dc ("leds: add BCM6328 LED driver") Signed-off-by: Jonas Gorski Acked-by: Álvaro Fernández Rojas Signed-off-by: Jacek Anaszewski --- drivers/leds/leds-bcm6328.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c index 1548259297c1..2cfd9389ee96 100644 --- a/drivers/leds/leds-bcm6328.c +++ b/drivers/leds/leds-bcm6328.c @@ -242,7 +242,7 @@ static int bcm6328_hwled(struct device *dev, struct device_node *nc, u32 reg, spin_lock_irqsave(lock, flags); val = bcm6328_led_read(addr); - val |= (BIT(reg) << (((sel % 4) * 4) + 16)); + val |= (BIT(reg % 4) << (((sel % 4) * 4) + 16)); bcm6328_led_write(addr, val); spin_unlock_irqrestore(lock, flags); } @@ -269,7 +269,7 @@ static int bcm6328_hwled(struct device *dev, struct device_node *nc, u32 reg, spin_lock_irqsave(lock, flags); val = bcm6328_led_read(addr); - val |= (BIT(reg) << ((sel % 4) * 4)); + val |= (BIT(reg % 4) << ((sel % 4) * 4)); bcm6328_led_write(addr, val); spin_unlock_irqrestore(lock, flags); } From 436c4c45b5b9562b59cedbb51b7343ab4a6dd8cc Mon Sep 17 00:00:00 2001 From: Zhang Bo Date: Tue, 13 Jun 2017 10:39:20 +0800 Subject: [PATCH 0774/1065] Revert "leds: handle suspend/resume in heartbeat trigger" This reverts commit 5ab92a7cb82c66bf30685583a38a18538e3807db. System cannot enter suspend mode because of heartbeat led trigger. In autosleep_wq, try_to_suspend function will try to enter suspend mode in specific period. it will get wakeup_count then call pm_notifier chain callback function and freeze processes. Heartbeat_pm_notifier is called and it call led_trigger_unregister to change the trigger of led device to none. It will send uevent message and the wakeup source count changed. As wakeup_count changed, suspend will abort. Fixes: 5ab92a7cb82c ("leds: handle suspend/resume in heartbeat trigger") Signed-off-by: Zhang Bo Acked-by: Pavel Machek Reviewed-by: Linus Walleij Signed-off-by: Jacek Anaszewski --- drivers/leds/trigger/ledtrig-heartbeat.c | 31 ------------------------ 1 file changed, 31 deletions(-) diff --git a/drivers/leds/trigger/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c index afa3b4099214..e95ea65380c8 100644 --- a/drivers/leds/trigger/ledtrig-heartbeat.c +++ b/drivers/leds/trigger/ledtrig-heartbeat.c @@ -20,7 +20,6 @@ #include #include #include -#include #include "../leds.h" static int panic_heartbeats; @@ -163,30 +162,6 @@ static struct led_trigger heartbeat_led_trigger = { .deactivate = heartbeat_trig_deactivate, }; -static int heartbeat_pm_notifier(struct notifier_block *nb, - unsigned long pm_event, void *unused) -{ - int rc; - - switch (pm_event) { - case PM_SUSPEND_PREPARE: - case PM_HIBERNATION_PREPARE: - case PM_RESTORE_PREPARE: - led_trigger_unregister(&heartbeat_led_trigger); - break; - case PM_POST_SUSPEND: - case PM_POST_HIBERNATION: - case PM_POST_RESTORE: - rc = led_trigger_register(&heartbeat_led_trigger); - if (rc) - pr_err("could not re-register heartbeat trigger\n"); - break; - default: - break; - } - return NOTIFY_DONE; -} - static int heartbeat_reboot_notifier(struct notifier_block *nb, unsigned long code, void *unused) { @@ -201,10 +176,6 @@ static int heartbeat_panic_notifier(struct notifier_block *nb, return NOTIFY_DONE; } -static struct notifier_block heartbeat_pm_nb = { - .notifier_call = heartbeat_pm_notifier, -}; - static struct notifier_block heartbeat_reboot_nb = { .notifier_call = heartbeat_reboot_notifier, }; @@ -221,14 +192,12 @@ static int __init heartbeat_trig_init(void) atomic_notifier_chain_register(&panic_notifier_list, &heartbeat_panic_nb); register_reboot_notifier(&heartbeat_reboot_nb); - register_pm_notifier(&heartbeat_pm_nb); } return rc; } static void __exit heartbeat_trig_exit(void) { - unregister_pm_notifier(&heartbeat_pm_nb); unregister_reboot_notifier(&heartbeat_reboot_nb); atomic_notifier_chain_unregister(&panic_notifier_list, &heartbeat_panic_nb); From 838519b89fa7e162f7190c70d888a65ee7889e12 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 13 Jun 2017 10:31:36 +0800 Subject: [PATCH 0775/1065] iio: buffer-dma: Add missing header buffer_impl.h Add buffer_impl.h as buffer.h was split into interface for using and for internals. Without this industrialio-buffer-dma.c fails to compile. Fixes: commit 33dd94cb972175249258329c4aaffddcc82c2005 ("iio:buffer.h - split into buffer.h and buffer_impl.h") Signed-off-by: Phil Reid Signed-off-by: Jonathan Cameron --- drivers/iio/buffer/industrialio-buffer-dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/buffer/industrialio-buffer-dma.c b/drivers/iio/buffer/industrialio-buffer-dma.c index dd99d273bae9..ff03324dee13 100644 --- a/drivers/iio/buffer/industrialio-buffer-dma.c +++ b/drivers/iio/buffer/industrialio-buffer-dma.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include From 7981dc07fe317e3506d706e5ef91b94da02656f4 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 13 Jun 2017 13:12:35 +0800 Subject: [PATCH 0776/1065] iio: buffer-dmaengine: Add missing header buffer_impl.h Add buffer_impl.h as buffer.h was split into interface for using and for internals. Without this industrialio-buffer-dmaengine.c fails to compile. Fixes: commit 33dd94cb972175249258329c4aaffddcc82c2005 ("iio:buffer.h - split into buffer.h and buffer_impl.h") Signed-off-by: Phil Reid Signed-off-by: Jonathan Cameron --- drivers/iio/buffer/industrialio-buffer-dmaengine.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c index 9fabed47053d..2b5a320f42c5 100644 --- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c +++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c @@ -14,6 +14,7 @@ #include #include +#include #include #include From 46464411307746e6297a034a9983a22c9dfc5a0c Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Thu, 18 May 2017 17:28:47 +0200 Subject: [PATCH 0777/1065] xen/blkback: fix disconnect while I/Os in flight MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Today disconnecting xen-blkback is broken in case there are still I/Os in flight: xen_blkif_disconnect() will bail out early without releasing all resources in the hope it will be called again when the last request has terminated. This, however, won't happen as xen_blkif_free() won't be called on termination of the last running request: xen_blkif_put() won't decrement the blkif refcnt to 0 as xen_blkif_disconnect() didn't finish before thus some xen_blkif_put() calls in xen_blkif_disconnect() didn't happen. To solve this deadlock xen_blkif_disconnect() and xen_blkif_alloc_rings() shouldn't use xen_blkif_put() and xen_blkif_get() but use some other way to do their accounting of resources. This at once fixes another error in xen_blkif_disconnect(): when it returned early with -EBUSY for another ring than 0 it would call xen_blkif_put() again for already handled rings on a subsequent call. This will lead to inconsistencies in the refcnt handling. Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross Tested-by: Steven Haigh Acked-by: Roger Pau Monné Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/common.h | 1 + drivers/block/xen-blkback/xenbus.c | 7 +++++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index dea61f6ab8cb..638597b17a38 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -281,6 +281,7 @@ struct xen_blkif_ring { wait_queue_head_t wq; atomic_t inflight; + bool active; /* One thread per blkif ring. */ struct task_struct *xenblkd; unsigned int waiting_reqs; diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 1f3dfaa54d87..998915174bb8 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -159,7 +159,7 @@ static int xen_blkif_alloc_rings(struct xen_blkif *blkif) init_waitqueue_head(&ring->shutdown_wq); ring->blkif = blkif; ring->st_print = jiffies; - xen_blkif_get(blkif); + ring->active = true; } return 0; @@ -249,6 +249,9 @@ static int xen_blkif_disconnect(struct xen_blkif *blkif) struct xen_blkif_ring *ring = &blkif->rings[r]; unsigned int i = 0; + if (!ring->active) + continue; + if (ring->xenblkd) { kthread_stop(ring->xenblkd); wake_up(&ring->shutdown_wq); @@ -296,7 +299,7 @@ static int xen_blkif_disconnect(struct xen_blkif *blkif) BUG_ON(ring->free_pages_num != 0); BUG_ON(ring->persistent_gnt_c != 0); WARN_ON(i != (XEN_BLKIF_REQS_PER_PAGE * blkif->nr_ring_pages)); - xen_blkif_put(blkif); + ring->active = false; } blkif->nr_ring_pages = 0; /* From cc1ec769b87c7dea9092fb537c512e0b6b7a5dac Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Mon, 22 May 2017 03:15:31 -0700 Subject: [PATCH 0778/1065] RDMA/bnxt_re: Fixing the Control path command and response handling Fixing a concurrency issue with creq handling. Each caller was given a globally managed crsq element, which was accessed outside a lock. This could result in corruption, if lot of applications are simultaneously issuing Control Path commands. Now, each caller will provide its own response buffer and the responses will be copied under a lock. Also, Fixing the queue full condition check for the CMDQ. As a part of these changes, the control path code is refactored to remove the code replication in the response status checking. Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/bnxt_re/qplib_fp.c | 215 ++++---------- drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 312 ++++++++++---------- drivers/infiniband/hw/bnxt_re/qplib_rcfw.h | 61 ++-- drivers/infiniband/hw/bnxt_re/qplib_res.h | 5 + drivers/infiniband/hw/bnxt_re/qplib_sp.c | 328 +++++---------------- 5 files changed, 317 insertions(+), 604 deletions(-) diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c index 43d08b5e9085..ea9ce4ff8999 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c @@ -284,7 +284,7 @@ int bnxt_qplib_create_qp1(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_create_qp1 req; - struct creq_create_qp1_resp *resp; + struct creq_create_qp1_resp resp; struct bnxt_qplib_pbl *pbl; struct bnxt_qplib_q *sq = &qp->sq; struct bnxt_qplib_q *rq = &qp->rq; @@ -394,31 +394,12 @@ int bnxt_qplib_create_qp1(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp) req.pd_id = cpu_to_le32(qp->pd->id); - resp = (struct creq_create_qp1_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&res->pdev->dev, "QPLIB: FP: CREATE_QP1 send failed"); - rc = -EINVAL; + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); + if (rc) goto fail; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: FP: CREATE_QP1 timed out"); - rc = -ETIMEDOUT; - goto fail; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: CREATE_QP1 failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - rc = -EINVAL; - goto fail; - } - qp->id = le32_to_cpu(resp->xid); + + qp->id = le32_to_cpu(resp.xid); qp->cur_qp_state = CMDQ_MODIFY_QP_NEW_STATE_RESET; sq->flush_in_progress = false; rq->flush_in_progress = false; @@ -442,7 +423,7 @@ int bnxt_qplib_create_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp) struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct sq_send *hw_sq_send_hdr, **hw_sq_send_ptr; struct cmdq_create_qp req; - struct creq_create_qp_resp *resp; + struct creq_create_qp_resp resp; struct bnxt_qplib_pbl *pbl; struct sq_psn_search **psn_search_ptr; unsigned long int psn_search, poff = 0; @@ -627,31 +608,12 @@ int bnxt_qplib_create_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp) } req.pd_id = cpu_to_le32(qp->pd->id); - resp = (struct creq_create_qp_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: CREATE_QP send failed"); - rc = -EINVAL; + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); + if (rc) goto fail; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: FP: CREATE_QP timed out"); - rc = -ETIMEDOUT; - goto fail; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: CREATE_QP failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - rc = -EINVAL; - goto fail; - } - qp->id = le32_to_cpu(resp->xid); + + qp->id = le32_to_cpu(resp.xid); qp->cur_qp_state = CMDQ_MODIFY_QP_NEW_STATE_RESET; sq->flush_in_progress = false; rq->flush_in_progress = false; @@ -769,10 +731,11 @@ int bnxt_qplib_modify_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_modify_qp req; - struct creq_modify_qp_resp *resp; + struct creq_modify_qp_resp resp; u16 cmd_flags = 0, pkey; u32 temp32[4]; u32 bmask; + int rc; RCFW_CMD_PREP(req, MODIFY_QP, cmd_flags); @@ -862,27 +825,10 @@ int bnxt_qplib_modify_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp) req.vlan_pcp_vlan_dei_vlan_id = cpu_to_le16(qp->vlan_id); - resp = (struct creq_modify_qp_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: MODIFY_QP send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: FP: MODIFY_QP timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: MODIFY_QP failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); + if (rc) + return rc; qp->cur_qp_state = qp->state; return 0; } @@ -891,37 +837,26 @@ int bnxt_qplib_query_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_query_qp req; - struct creq_query_qp_resp *resp; + struct creq_query_qp_resp resp; + struct bnxt_qplib_rcfw_sbuf *sbuf; struct creq_query_qp_resp_sb *sb; u16 cmd_flags = 0; u32 temp32[4]; - int i; + int i, rc = 0; RCFW_CMD_PREP(req, QUERY_QP, cmd_flags); + sbuf = bnxt_qplib_rcfw_alloc_sbuf(rcfw, sizeof(*sb)); + if (!sbuf) + return -ENOMEM; + sb = sbuf->sb; + req.qp_cid = cpu_to_le32(qp->id); req.resp_size = sizeof(*sb) / BNXT_QPLIB_CMDQE_UNITS; - resp = (struct creq_query_qp_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - (void **)&sb, 0); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: QUERY_QP send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: FP: QUERY_QP timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: QUERY_QP failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, (void *)&resp, + (void *)sbuf, 0); + if (rc) + goto bail; /* Extract the context from the side buffer */ qp->state = sb->en_sqd_async_notify_state & CREQ_QUERY_QP_RESP_SB_STATE_MASK; @@ -976,7 +911,9 @@ int bnxt_qplib_query_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp) qp->dest_qpn = le32_to_cpu(sb->dest_qp_id); memcpy(qp->smac, sb->src_mac, 6); qp->vlan_id = le16_to_cpu(sb->vlan_pcp_vlan_dei_vlan_id); - return 0; +bail: + bnxt_qplib_rcfw_free_sbuf(rcfw, sbuf); + return rc; } static void __clean_cq(struct bnxt_qplib_cq *cq, u64 qp) @@ -1021,34 +958,18 @@ int bnxt_qplib_destroy_qp(struct bnxt_qplib_res *res, { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_destroy_qp req; - struct creq_destroy_qp_resp *resp; + struct creq_destroy_qp_resp resp; unsigned long flags; u16 cmd_flags = 0; + int rc; RCFW_CMD_PREP(req, DESTROY_QP, cmd_flags); req.qp_cid = cpu_to_le32(qp->id); - resp = (struct creq_destroy_qp_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: DESTROY_QP send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: FP: DESTROY_QP timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: DESTROY_QP failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); + if (rc) + return rc; /* Must walk the associated CQs to nullified the QP ptr */ spin_lock_irqsave(&qp->scq->hwq.lock, flags); @@ -1483,7 +1404,7 @@ int bnxt_qplib_create_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_create_cq req; - struct creq_create_cq_resp *resp; + struct creq_create_cq_resp resp; struct bnxt_qplib_pbl *pbl; u16 cmd_flags = 0; int rc; @@ -1525,30 +1446,12 @@ int bnxt_qplib_create_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq) (cq->cnq_hw_ring_id & CMDQ_CREATE_CQ_CNQ_ID_MASK) << CMDQ_CREATE_CQ_CNQ_ID_SFT); - resp = (struct creq_create_cq_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: CREATE_CQ send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: FP: CREATE_CQ timed out"); - rc = -ETIMEDOUT; + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); + if (rc) goto fail; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: CREATE_CQ failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - rc = -EINVAL; - goto fail; - } - cq->id = le32_to_cpu(resp->xid); + + cq->id = le32_to_cpu(resp.xid); cq->dbr_base = res->dpi_tbl.dbr_bar_reg_iomem; cq->period = BNXT_QPLIB_QUEUE_START_PERIOD; init_waitqueue_head(&cq->waitq); @@ -1566,33 +1469,17 @@ int bnxt_qplib_destroy_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_destroy_cq req; - struct creq_destroy_cq_resp *resp; + struct creq_destroy_cq_resp resp; u16 cmd_flags = 0; + int rc; RCFW_CMD_PREP(req, DESTROY_CQ, cmd_flags); req.cq_cid = cpu_to_le32(cq->id); - resp = (struct creq_destroy_cq_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: DESTROY_CQ send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: FP: DESTROY_CQ timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: FP: DESTROY_CQ failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); + if (rc) + return rc; bnxt_qplib_free_hwq(res->pdev, &cq->hwq); return 0; } diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c index 23fb7260662b..16e42754dbec 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c @@ -39,72 +39,55 @@ #include #include #include +#include + #include "roce_hsi.h" #include "qplib_res.h" #include "qplib_rcfw.h" static void bnxt_qplib_service_creq(unsigned long data); /* Hardware communication channel */ -int bnxt_qplib_rcfw_wait_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie) +static int __wait_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie) { u16 cbit; int rc; - cookie &= RCFW_MAX_COOKIE_VALUE; cbit = cookie % RCFW_MAX_OUTSTANDING_CMD; - if (!test_bit(cbit, rcfw->cmdq_bitmap)) - dev_warn(&rcfw->pdev->dev, - "QPLIB: CMD bit %d for cookie 0x%x is not set?", - cbit, cookie); - rc = wait_event_timeout(rcfw->waitq, !test_bit(cbit, rcfw->cmdq_bitmap), msecs_to_jiffies(RCFW_CMD_WAIT_TIME_MS)); - if (!rc) { - dev_warn(&rcfw->pdev->dev, - "QPLIB: Bono Error: timeout %d msec, msg {0x%x}\n", - RCFW_CMD_WAIT_TIME_MS, cookie); - } - - return rc; + return rc ? 0 : -ETIMEDOUT; }; -int bnxt_qplib_rcfw_block_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie) +static int __block_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie) { - u32 count = -1; + u32 count = RCFW_BLOCKED_CMD_WAIT_COUNT; u16 cbit; - cookie &= RCFW_MAX_COOKIE_VALUE; cbit = cookie % RCFW_MAX_OUTSTANDING_CMD; if (!test_bit(cbit, rcfw->cmdq_bitmap)) goto done; do { + mdelay(1); /* 1m sec */ bnxt_qplib_service_creq((unsigned long)rcfw); } while (test_bit(cbit, rcfw->cmdq_bitmap) && --count); done: - return count; + return count ? 0 : -ETIMEDOUT; }; -void *bnxt_qplib_rcfw_send_message(struct bnxt_qplib_rcfw *rcfw, - struct cmdq_base *req, void **crsbe, - u8 is_block) +static int __send_message(struct bnxt_qplib_rcfw *rcfw, struct cmdq_base *req, + struct creq_base *resp, void *sb, u8 is_block) { - struct bnxt_qplib_crsq *crsq = &rcfw->crsq; struct bnxt_qplib_cmdqe *cmdqe, **cmdq_ptr; struct bnxt_qplib_hwq *cmdq = &rcfw->cmdq; - struct bnxt_qplib_hwq *crsb = &rcfw->crsb; - struct bnxt_qplib_crsqe *crsqe = NULL; - struct bnxt_qplib_crsbe **crsb_ptr; + struct bnxt_qplib_crsq *crsqe; u32 sw_prod, cmdq_prod; - u8 retry_cnt = 0xFF; - dma_addr_t dma_addr; unsigned long flags; u32 size, opcode; u16 cookie, cbit; int pg, idx; u8 *preq; -retry: opcode = req->opcode; if (!test_bit(FIRMWARE_INITIALIZED_FLAG, &rcfw->flags) && (opcode != CMDQ_BASE_OPCODE_QUERY_FUNC && @@ -112,63 +95,50 @@ retry: dev_err(&rcfw->pdev->dev, "QPLIB: RCFW not initialized, reject opcode 0x%x", opcode); - return NULL; + return -EINVAL; } if (test_bit(FIRMWARE_INITIALIZED_FLAG, &rcfw->flags) && opcode == CMDQ_BASE_OPCODE_INITIALIZE_FW) { dev_err(&rcfw->pdev->dev, "QPLIB: RCFW already initialized!"); - return NULL; + return -EINVAL; } /* Cmdq are in 16-byte units, each request can consume 1 or more * cmdqe */ spin_lock_irqsave(&cmdq->lock, flags); - if (req->cmd_size > cmdq->max_elements - - ((HWQ_CMP(cmdq->prod, cmdq) - HWQ_CMP(cmdq->cons, cmdq)) & - (cmdq->max_elements - 1))) { + if (req->cmd_size >= HWQ_FREE_SLOTS(cmdq)) { dev_err(&rcfw->pdev->dev, "QPLIB: RCFW: CMDQ is full!"); spin_unlock_irqrestore(&cmdq->lock, flags); - - if (!retry_cnt--) - return NULL; - goto retry; + return -EAGAIN; } - retry_cnt = 0xFF; - cookie = atomic_inc_return(&rcfw->seq_num) & RCFW_MAX_COOKIE_VALUE; + cookie = rcfw->seq_num & RCFW_MAX_COOKIE_VALUE; cbit = cookie % RCFW_MAX_OUTSTANDING_CMD; if (is_block) cookie |= RCFW_CMD_IS_BLOCKING; + + set_bit(cbit, rcfw->cmdq_bitmap); req->cookie = cpu_to_le16(cookie); - if (test_and_set_bit(cbit, rcfw->cmdq_bitmap)) { - dev_err(&rcfw->pdev->dev, - "QPLIB: RCFW MAX outstanding cmd reached!"); - atomic_dec(&rcfw->seq_num); + crsqe = &rcfw->crsqe_tbl[cbit]; + if (crsqe->resp) { spin_unlock_irqrestore(&cmdq->lock, flags); - - if (!retry_cnt--) - return NULL; - goto retry; + return -EBUSY; } - /* Reserve a resp buffer slot if requested */ - if (req->resp_size && crsbe) { - spin_lock(&crsb->lock); - sw_prod = HWQ_CMP(crsb->prod, crsb); - crsb_ptr = (struct bnxt_qplib_crsbe **)crsb->pbl_ptr; - *crsbe = (void *)&crsb_ptr[get_crsb_pg(sw_prod)] - [get_crsb_idx(sw_prod)]; - bnxt_qplib_crsb_dma_next(crsb->pbl_dma_ptr, sw_prod, &dma_addr); - req->resp_addr = cpu_to_le64(dma_addr); - crsb->prod++; - spin_unlock(&crsb->lock); + memset(resp, 0, sizeof(*resp)); + crsqe->resp = (struct creq_qp_event *)resp; + crsqe->resp->cookie = req->cookie; + crsqe->req_size = req->cmd_size; + if (req->resp_size && sb) { + struct bnxt_qplib_rcfw_sbuf *sbuf = sb; - req->resp_size = (sizeof(struct bnxt_qplib_crsbe) + - BNXT_QPLIB_CMDQE_UNITS - 1) / - BNXT_QPLIB_CMDQE_UNITS; + req->resp_addr = cpu_to_le64(sbuf->dma_addr); + req->resp_size = (sbuf->size + BNXT_QPLIB_CMDQE_UNITS - 1) / + BNXT_QPLIB_CMDQE_UNITS; } + cmdq_ptr = (struct bnxt_qplib_cmdqe **)cmdq->pbl_ptr; preq = (u8 *)req; size = req->cmd_size * BNXT_QPLIB_CMDQE_UNITS; @@ -190,23 +160,24 @@ retry: preq += min_t(u32, size, sizeof(*cmdqe)); size -= min_t(u32, size, sizeof(*cmdqe)); cmdq->prod++; + rcfw->seq_num++; } while (size > 0); + rcfw->seq_num++; + cmdq_prod = cmdq->prod; if (rcfw->flags & FIRMWARE_FIRST_FLAG) { - /* The very first doorbell write is required to set this flag - * which prompts the FW to reset its internal pointers + /* The very first doorbell write + * is required to set this flag + * which prompts the FW to reset + * its internal pointers */ cmdq_prod |= FIRMWARE_FIRST_FLAG; rcfw->flags &= ~FIRMWARE_FIRST_FLAG; } - sw_prod = HWQ_CMP(crsq->prod, crsq); - crsqe = &crsq->crsq[sw_prod]; - memset(crsqe, 0, sizeof(*crsqe)); - crsq->prod++; - crsqe->req_size = req->cmd_size; /* ring CMDQ DB */ + wmb(); writel(cmdq_prod, rcfw->cmdq_bar_reg_iomem + rcfw->cmdq_bar_reg_prod_off); writel(RCFW_CMDQ_TRIG_VAL, rcfw->cmdq_bar_reg_iomem + @@ -214,9 +185,56 @@ retry: done: spin_unlock_irqrestore(&cmdq->lock, flags); /* Return the CREQ response pointer */ - return crsqe ? &crsqe->qp_event : NULL; + return 0; } +int bnxt_qplib_rcfw_send_message(struct bnxt_qplib_rcfw *rcfw, + struct cmdq_base *req, + struct creq_base *resp, + void *sb, u8 is_block) +{ + struct creq_qp_event *evnt = (struct creq_qp_event *)resp; + u16 cookie; + u8 opcode, retry_cnt = 0xFF; + int rc = 0; + + do { + opcode = req->opcode; + rc = __send_message(rcfw, req, resp, sb, is_block); + cookie = le16_to_cpu(req->cookie) & RCFW_MAX_COOKIE_VALUE; + if (!rc) + break; + + if (!retry_cnt || (rc != -EAGAIN && rc != -EBUSY)) { + /* send failed */ + dev_err(&rcfw->pdev->dev, "QPLIB: cmdq[%#x]=%#x send failed", + cookie, opcode); + return rc; + } + is_block ? mdelay(1) : usleep_range(500, 1000); + + } while (retry_cnt--); + + if (is_block) + rc = __block_for_resp(rcfw, cookie); + else + rc = __wait_for_resp(rcfw, cookie); + if (rc) { + /* timed out */ + dev_err(&rcfw->pdev->dev, "QPLIB: cmdq[%#x]=%#x timedout (%d)msec", + cookie, opcode, RCFW_CMD_WAIT_TIME_MS); + return rc; + } + + if (evnt->status) { + /* failed with status */ + dev_err(&rcfw->pdev->dev, "QPLIB: cmdq[%#x]=%#x status %#x", + cookie, opcode, evnt->status); + rc = -EFAULT; + } + + return rc; +} /* Completions */ static int bnxt_qplib_process_func_event(struct bnxt_qplib_rcfw *rcfw, struct creq_func_event *func_event) @@ -260,12 +278,12 @@ static int bnxt_qplib_process_func_event(struct bnxt_qplib_rcfw *rcfw, static int bnxt_qplib_process_qp_event(struct bnxt_qplib_rcfw *rcfw, struct creq_qp_event *qp_event) { - struct bnxt_qplib_crsq *crsq = &rcfw->crsq; struct bnxt_qplib_hwq *cmdq = &rcfw->cmdq; - struct bnxt_qplib_crsqe *crsqe; - u16 cbit, cookie, blocked = 0; + struct bnxt_qplib_crsq *crsqe; unsigned long flags; - u32 sw_cons; + u16 cbit, blocked = 0; + u16 cookie; + __le16 mcookie; switch (qp_event->event) { case CREQ_QP_EVENT_EVENT_QP_ERROR_NOTIFICATION: @@ -275,24 +293,31 @@ static int bnxt_qplib_process_qp_event(struct bnxt_qplib_rcfw *rcfw, default: /* Command Response */ spin_lock_irqsave(&cmdq->lock, flags); - sw_cons = HWQ_CMP(crsq->cons, crsq); - crsqe = &crsq->crsq[sw_cons]; - crsq->cons++; - memcpy(&crsqe->qp_event, qp_event, sizeof(crsqe->qp_event)); - - cookie = le16_to_cpu(crsqe->qp_event.cookie); + cookie = le16_to_cpu(qp_event->cookie); + mcookie = qp_event->cookie; blocked = cookie & RCFW_CMD_IS_BLOCKING; cookie &= RCFW_MAX_COOKIE_VALUE; cbit = cookie % RCFW_MAX_OUTSTANDING_CMD; + crsqe = &rcfw->crsqe_tbl[cbit]; + if (crsqe->resp && + crsqe->resp->cookie == mcookie) { + memcpy(crsqe->resp, qp_event, sizeof(*qp_event)); + crsqe->resp = NULL; + } else { + dev_err(&rcfw->pdev->dev, + "QPLIB: CMD %s resp->cookie = %#x, evnt->cookie = %#x", + crsqe->resp ? "mismatch" : "collision", + crsqe->resp ? crsqe->resp->cookie : 0, mcookie); + } if (!test_and_clear_bit(cbit, rcfw->cmdq_bitmap)) dev_warn(&rcfw->pdev->dev, "QPLIB: CMD bit %d was not requested", cbit); - cmdq->cons += crsqe->req_size; - spin_unlock_irqrestore(&cmdq->lock, flags); + crsqe->req_size = 0; + if (!blocked) wake_up(&rcfw->waitq); - break; + spin_unlock_irqrestore(&cmdq->lock, flags); } return 0; } @@ -305,12 +330,12 @@ static void bnxt_qplib_service_creq(unsigned long data) struct creq_base *creqe, **creq_ptr; u32 sw_cons, raw_cons; unsigned long flags; - u32 type; + u32 type, budget = CREQ_ENTRY_POLL_BUDGET; - /* Service the CREQ until empty */ + /* Service the CREQ until budget is over */ spin_lock_irqsave(&creq->lock, flags); raw_cons = creq->cons; - while (1) { + while (budget > 0) { sw_cons = HWQ_CMP(raw_cons, creq); creq_ptr = (struct creq_base **)creq->pbl_ptr; creqe = &creq_ptr[get_creq_pg(sw_cons)][get_creq_idx(sw_cons)]; @@ -320,15 +345,9 @@ static void bnxt_qplib_service_creq(unsigned long data) type = creqe->type & CREQ_BASE_TYPE_MASK; switch (type) { case CREQ_BASE_TYPE_QP_EVENT: - if (!bnxt_qplib_process_qp_event - (rcfw, (struct creq_qp_event *)creqe)) - rcfw->creq_qp_event_processed++; - else { - dev_warn(&rcfw->pdev->dev, "QPLIB: crsqe with"); - dev_warn(&rcfw->pdev->dev, - "QPLIB: type = 0x%x not handled", - type); - } + bnxt_qplib_process_qp_event + (rcfw, (struct creq_qp_event *)creqe); + rcfw->creq_qp_event_processed++; break; case CREQ_BASE_TYPE_FUNC_EVENT: if (!bnxt_qplib_process_func_event @@ -346,7 +365,9 @@ static void bnxt_qplib_service_creq(unsigned long data) break; } raw_cons++; + budget--; } + if (creq->cons != raw_cons) { creq->cons = raw_cons; CREQ_DB_REARM(rcfw->creq_bar_reg_iomem, raw_cons, @@ -375,23 +396,16 @@ static irqreturn_t bnxt_qplib_creq_irq(int irq, void *dev_instance) /* RCFW */ int bnxt_qplib_deinit_rcfw(struct bnxt_qplib_rcfw *rcfw) { - struct creq_deinitialize_fw_resp *resp; struct cmdq_deinitialize_fw req; + struct creq_deinitialize_fw_resp resp; u16 cmd_flags = 0; + int rc; RCFW_CMD_PREP(req, DEINITIALIZE_FW, cmd_flags); - resp = (struct creq_deinitialize_fw_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) - return -EINVAL; - - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) - return -ETIMEDOUT; - - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) - return -EFAULT; + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, (void *)&resp, + NULL, 0); + if (rc) + return rc; clear_bit(FIRMWARE_INITIALIZED_FLAG, &rcfw->flags); return 0; @@ -417,9 +431,10 @@ static int __get_pbl_pg_idx(struct bnxt_qplib_pbl *pbl) int bnxt_qplib_init_rcfw(struct bnxt_qplib_rcfw *rcfw, struct bnxt_qplib_ctx *ctx, int is_virtfn) { - struct creq_initialize_fw_resp *resp; struct cmdq_initialize_fw req; + struct creq_initialize_fw_resp resp; u16 cmd_flags = 0, level; + int rc; RCFW_CMD_PREP(req, INITIALIZE_FW, cmd_flags); @@ -482,37 +497,19 @@ int bnxt_qplib_init_rcfw(struct bnxt_qplib_rcfw *rcfw, skip_ctx_setup: req.stat_ctx_id = cpu_to_le32(ctx->stats.fw_id); - resp = (struct creq_initialize_fw_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&rcfw->pdev->dev, - "QPLIB: RCFW: INITIALIZE_FW send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, - "QPLIB: RCFW: INITIALIZE_FW timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, - "QPLIB: RCFW: INITIALIZE_FW failed"); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, (void *)&resp, + NULL, 0); + if (rc) + return rc; set_bit(FIRMWARE_INITIALIZED_FLAG, &rcfw->flags); return 0; } void bnxt_qplib_free_rcfw_channel(struct bnxt_qplib_rcfw *rcfw) { - bnxt_qplib_free_hwq(rcfw->pdev, &rcfw->crsb); - kfree(rcfw->crsq.crsq); + kfree(rcfw->crsqe_tbl); bnxt_qplib_free_hwq(rcfw->pdev, &rcfw->cmdq); bnxt_qplib_free_hwq(rcfw->pdev, &rcfw->creq); - rcfw->pdev = NULL; } @@ -539,21 +536,11 @@ int bnxt_qplib_alloc_rcfw_channel(struct pci_dev *pdev, goto fail; } - rcfw->crsq.max_elements = rcfw->cmdq.max_elements; - rcfw->crsq.crsq = kcalloc(rcfw->crsq.max_elements, - sizeof(*rcfw->crsq.crsq), GFP_KERNEL); - if (!rcfw->crsq.crsq) + rcfw->crsqe_tbl = kcalloc(rcfw->cmdq.max_elements, + sizeof(*rcfw->crsqe_tbl), GFP_KERNEL); + if (!rcfw->crsqe_tbl) goto fail; - rcfw->crsb.max_elements = BNXT_QPLIB_CRSBE_MAX_CNT; - if (bnxt_qplib_alloc_init_hwq(rcfw->pdev, &rcfw->crsb, NULL, 0, - &rcfw->crsb.max_elements, - BNXT_QPLIB_CRSBE_UNITS, 0, PAGE_SIZE, - HWQ_TYPE_CTX)) { - dev_err(&rcfw->pdev->dev, - "QPLIB: HW channel CRSB allocation failed"); - goto fail; - } return 0; fail: @@ -606,7 +593,7 @@ int bnxt_qplib_enable_rcfw_channel(struct pci_dev *pdev, int rc; /* General */ - atomic_set(&rcfw->seq_num, 0); + rcfw->seq_num = 0; rcfw->flags = FIRMWARE_FIRST_FLAG; bmap_size = BITS_TO_LONGS(RCFW_MAX_OUTSTANDING_CMD * sizeof(unsigned long)); @@ -636,10 +623,6 @@ int bnxt_qplib_enable_rcfw_channel(struct pci_dev *pdev, rcfw->cmdq_bar_reg_trig_off = RCFW_COMM_TRIG_OFFSET; - /* CRSQ */ - rcfw->crsq.prod = 0; - rcfw->crsq.cons = 0; - /* CREQ */ rcfw->creq_bar_reg = RCFW_COMM_CONS_PCI_BAR_REGION; res_base = pci_resource_start(pdev, rcfw->creq_bar_reg); @@ -692,3 +675,34 @@ int bnxt_qplib_enable_rcfw_channel(struct pci_dev *pdev, __iowrite32_copy(rcfw->cmdq_bar_reg_iomem, &init, sizeof(init) / 4); return 0; } + +struct bnxt_qplib_rcfw_sbuf *bnxt_qplib_rcfw_alloc_sbuf( + struct bnxt_qplib_rcfw *rcfw, + u32 size) +{ + struct bnxt_qplib_rcfw_sbuf *sbuf; + + sbuf = kzalloc(sizeof(*sbuf), GFP_ATOMIC); + if (!sbuf) + return NULL; + + sbuf->size = size; + sbuf->sb = dma_zalloc_coherent(&rcfw->pdev->dev, sbuf->size, + &sbuf->dma_addr, GFP_ATOMIC); + if (!sbuf->sb) + goto bail; + + return sbuf; +bail: + kfree(sbuf); + return NULL; +} + +void bnxt_qplib_rcfw_free_sbuf(struct bnxt_qplib_rcfw *rcfw, + struct bnxt_qplib_rcfw_sbuf *sbuf) +{ + if (sbuf->sb) + dma_free_coherent(&rcfw->pdev->dev, sbuf->size, + sbuf->sb, sbuf->dma_addr); + kfree(sbuf); +} diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h index d3567d75bf58..09ce121770cd 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h +++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h @@ -73,6 +73,7 @@ #define RCFW_MAX_OUTSTANDING_CMD BNXT_QPLIB_CMDQE_MAX_CNT #define RCFW_MAX_COOKIE_VALUE 0x7FFF #define RCFW_CMD_IS_BLOCKING 0x8000 +#define RCFW_BLOCKED_CMD_WAIT_COUNT 0x4E20 /* Cmdq contains a fix number of a 16-Byte slots */ struct bnxt_qplib_cmdqe { @@ -94,32 +95,6 @@ struct bnxt_qplib_crsbe { u8 data[1024]; }; -/* CRSQ SB */ -#define BNXT_QPLIB_CRSBE_MAX_CNT 4 -#define BNXT_QPLIB_CRSBE_UNITS sizeof(struct bnxt_qplib_crsbe) -#define BNXT_QPLIB_CRSBE_CNT_PER_PG (PAGE_SIZE / BNXT_QPLIB_CRSBE_UNITS) - -#define MAX_CRSB_IDX (BNXT_QPLIB_CRSBE_MAX_CNT - 1) -#define MAX_CRSB_IDX_PER_PG (BNXT_QPLIB_CRSBE_CNT_PER_PG - 1) - -static inline u32 get_crsb_pg(u32 val) -{ - return (val & ~MAX_CRSB_IDX_PER_PG) / BNXT_QPLIB_CRSBE_CNT_PER_PG; -} - -static inline u32 get_crsb_idx(u32 val) -{ - return val & MAX_CRSB_IDX_PER_PG; -} - -static inline void bnxt_qplib_crsb_dma_next(dma_addr_t *pg_map_arr, - u32 prod, dma_addr_t *dma_addr) -{ - *dma_addr = pg_map_arr[(prod) / BNXT_QPLIB_CRSBE_CNT_PER_PG]; - *dma_addr += ((prod) % BNXT_QPLIB_CRSBE_CNT_PER_PG) * - BNXT_QPLIB_CRSBE_UNITS; -} - /* CREQ */ /* Allocate 1 per QP for async error notification for now */ #define BNXT_QPLIB_CREQE_MAX_CNT (64 * 1024) @@ -158,17 +133,19 @@ static inline u32 get_creq_idx(u32 val) #define CREQ_DB(db, raw_cons, cp_bit) \ writel(CREQ_DB_CP_FLAGS | ((raw_cons) & ((cp_bit) - 1)), db) +#define CREQ_ENTRY_POLL_BUDGET 0x100 + /* HWQ */ -struct bnxt_qplib_crsqe { - struct creq_qp_event qp_event; + +struct bnxt_qplib_crsq { + struct creq_qp_event *resp; u32 req_size; }; -struct bnxt_qplib_crsq { - struct bnxt_qplib_crsqe *crsq; - u32 prod; - u32 cons; - u32 max_elements; +struct bnxt_qplib_rcfw_sbuf { + void *sb; + dma_addr_t dma_addr; + u32 size; }; /* RCFW Communication Channels */ @@ -185,7 +162,7 @@ struct bnxt_qplib_rcfw { wait_queue_head_t waitq; int (*aeq_handler)(struct bnxt_qplib_rcfw *, struct creq_func_event *); - atomic_t seq_num; + u32 seq_num; /* Bar region info */ void __iomem *cmdq_bar_reg_iomem; @@ -203,8 +180,7 @@ struct bnxt_qplib_rcfw { /* Actual Cmd and Resp Queues */ struct bnxt_qplib_hwq cmdq; - struct bnxt_qplib_crsq crsq; - struct bnxt_qplib_hwq crsb; + struct bnxt_qplib_crsq *crsqe_tbl; }; void bnxt_qplib_free_rcfw_channel(struct bnxt_qplib_rcfw *rcfw); @@ -219,11 +195,14 @@ int bnxt_qplib_enable_rcfw_channel(struct pci_dev *pdev, (struct bnxt_qplib_rcfw *, struct creq_func_event *)); -int bnxt_qplib_rcfw_block_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie); -int bnxt_qplib_rcfw_wait_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie); -void *bnxt_qplib_rcfw_send_message(struct bnxt_qplib_rcfw *rcfw, - struct cmdq_base *req, void **crsbe, - u8 is_block); +struct bnxt_qplib_rcfw_sbuf *bnxt_qplib_rcfw_alloc_sbuf( + struct bnxt_qplib_rcfw *rcfw, + u32 size); +void bnxt_qplib_rcfw_free_sbuf(struct bnxt_qplib_rcfw *rcfw, + struct bnxt_qplib_rcfw_sbuf *sbuf); +int bnxt_qplib_rcfw_send_message(struct bnxt_qplib_rcfw *rcfw, + struct cmdq_base *req, struct creq_base *resp, + void *sbuf, u8 is_block); int bnxt_qplib_deinit_rcfw(struct bnxt_qplib_rcfw *rcfw); int bnxt_qplib_init_rcfw(struct bnxt_qplib_rcfw *rcfw, diff --git a/drivers/infiniband/hw/bnxt_re/qplib_res.h b/drivers/infiniband/hw/bnxt_re/qplib_res.h index 6277d802ca4b..4103e602b058 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_res.h +++ b/drivers/infiniband/hw/bnxt_re/qplib_res.h @@ -48,6 +48,11 @@ extern const struct bnxt_qplib_gid bnxt_qplib_gid_zero; #define HWQ_CMP(idx, hwq) ((idx) & ((hwq)->max_elements - 1)) +#define HWQ_FREE_SLOTS(hwq) (hwq->max_elements - \ + ((HWQ_CMP(hwq->prod, hwq)\ + - HWQ_CMP(hwq->cons, hwq))\ + & (hwq->max_elements - 1))) + enum bnxt_qplib_hwq_type { HWQ_TYPE_CTX, HWQ_TYPE_QUEUE, diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.c b/drivers/infiniband/hw/bnxt_re/qplib_sp.c index 7b31eccedf11..cf7c9cb185d5 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_sp.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.c @@ -55,37 +55,30 @@ int bnxt_qplib_get_dev_attr(struct bnxt_qplib_rcfw *rcfw, struct bnxt_qplib_dev_attr *attr) { struct cmdq_query_func req; - struct creq_query_func_resp *resp; + struct creq_query_func_resp resp; + struct bnxt_qplib_rcfw_sbuf *sbuf; struct creq_query_func_resp_sb *sb; u16 cmd_flags = 0; u32 temp; u8 *tqm_alloc; - int i; + int i, rc = 0; RCFW_CMD_PREP(req, QUERY_FUNC, cmd_flags); - req.resp_size = sizeof(*sb) / BNXT_QPLIB_CMDQE_UNITS; - resp = (struct creq_query_func_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, (void **)&sb, - 0); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: QUERY_FUNC send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: SP: QUERY_FUNC timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: QUERY_FUNC failed "); + sbuf = bnxt_qplib_rcfw_alloc_sbuf(rcfw, sizeof(*sb)); + if (!sbuf) { dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; + "QPLIB: SP: QUERY_FUNC alloc side buffer failed"); + return -ENOMEM; } + + sb = sbuf->sb; + req.resp_size = sizeof(*sb) / BNXT_QPLIB_CMDQE_UNITS; + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, (void *)&resp, + (void *)sbuf, 0); + if (rc) + goto bail; + /* Extract the context from the side buffer */ attr->max_qp = le32_to_cpu(sb->max_qp); attr->max_qp_rd_atom = @@ -130,7 +123,10 @@ int bnxt_qplib_get_dev_attr(struct bnxt_qplib_rcfw *rcfw, attr->tqm_alloc_reqs[i * 4 + 2] = *(++tqm_alloc); attr->tqm_alloc_reqs[i * 4 + 3] = *(++tqm_alloc); } - return 0; + +bail: + bnxt_qplib_rcfw_free_sbuf(rcfw, sbuf); + return rc; } /* SGID */ @@ -178,8 +174,9 @@ int bnxt_qplib_del_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, /* Remove GID from the SGID table */ if (update) { struct cmdq_delete_gid req; - struct creq_delete_gid_resp *resp; + struct creq_delete_gid_resp resp; u16 cmd_flags = 0; + int rc; RCFW_CMD_PREP(req, DELETE_GID, cmd_flags); if (sgid_tbl->hw_id[index] == 0xFFFF) { @@ -188,31 +185,10 @@ int bnxt_qplib_del_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, return -EINVAL; } req.gid_index = cpu_to_le16(sgid_tbl->hw_id[index]); - resp = (struct creq_delete_gid_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, NULL, - 0); - if (!resp) { - dev_err(&res->pdev->dev, - "QPLIB: SP: DELETE_GID send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, - le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&res->pdev->dev, - "QPLIB: SP: DELETE_GID timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&res->pdev->dev, - "QPLIB: SP: DELETE_GID failed "); - dev_err(&res->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); + if (rc) + return rc; } memcpy(&sgid_tbl->tbl[index], &bnxt_qplib_gid_zero, sizeof(bnxt_qplib_gid_zero)); @@ -234,7 +210,7 @@ int bnxt_qplib_add_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, struct bnxt_qplib_res, sgid_tbl); struct bnxt_qplib_rcfw *rcfw = res->rcfw; - int i, free_idx, rc = 0; + int i, free_idx; if (!sgid_tbl) { dev_err(&res->pdev->dev, "QPLIB: SGID table not allocated"); @@ -266,10 +242,11 @@ int bnxt_qplib_add_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, } if (update) { struct cmdq_add_gid req; - struct creq_add_gid_resp *resp; + struct creq_add_gid_resp resp; u16 cmd_flags = 0; u32 temp32[4]; u16 temp16[3]; + int rc; RCFW_CMD_PREP(req, ADD_GID, cmd_flags); @@ -290,31 +267,11 @@ int bnxt_qplib_add_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, req.src_mac[1] = cpu_to_be16(temp16[1]); req.src_mac[2] = cpu_to_be16(temp16[2]); - resp = (struct creq_add_gid_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&res->pdev->dev, - "QPLIB: SP: ADD_GID send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, - le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&res->pdev->dev, - "QPIB: SP: ADD_GID timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&res->pdev->dev, "QPLIB: SP: ADD_GID failed "); - dev_err(&res->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } - sgid_tbl->hw_id[free_idx] = le32_to_cpu(resp->xid); + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); + if (rc) + return rc; + sgid_tbl->hw_id[free_idx] = le32_to_cpu(resp.xid); } /* Add GID to the sgid_tbl */ memcpy(&sgid_tbl->tbl[free_idx], gid, sizeof(*gid)); @@ -325,7 +282,7 @@ int bnxt_qplib_add_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, *index = free_idx; /* unlock */ - return rc; + return 0; } /* pkeys */ @@ -422,10 +379,11 @@ int bnxt_qplib_create_ah(struct bnxt_qplib_res *res, struct bnxt_qplib_ah *ah) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_create_ah req; - struct creq_create_ah_resp *resp; + struct creq_create_ah_resp resp; u16 cmd_flags = 0; u32 temp32[4]; u16 temp16[3]; + int rc; RCFW_CMD_PREP(req, CREATE_AH, cmd_flags); @@ -450,28 +408,12 @@ int bnxt_qplib_create_ah(struct bnxt_qplib_res *res, struct bnxt_qplib_ah *ah) req.dest_mac[1] = cpu_to_le16(temp16[1]); req.dest_mac[2] = cpu_to_le16(temp16[2]); - resp = (struct creq_create_ah_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 1); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: CREATE_AH send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_block_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: SP: CREATE_AH timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: CREATE_AH failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } - ah->id = le32_to_cpu(resp->xid); + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, (void *)&resp, + NULL, 1); + if (rc) + return rc; + + ah->id = le32_to_cpu(resp.xid); return 0; } @@ -479,35 +421,19 @@ int bnxt_qplib_destroy_ah(struct bnxt_qplib_res *res, struct bnxt_qplib_ah *ah) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_destroy_ah req; - struct creq_destroy_ah_resp *resp; + struct creq_destroy_ah_resp resp; u16 cmd_flags = 0; + int rc; /* Clean up the AH table in the device */ RCFW_CMD_PREP(req, DESTROY_AH, cmd_flags); req.ah_cid = cpu_to_le32(ah->id); - resp = (struct creq_destroy_ah_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 1); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: DESTROY_AH send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_block_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: SP: DESTROY_AH timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: DESTROY_AH failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, (void *)&resp, + NULL, 1); + if (rc) + return rc; return 0; } @@ -516,8 +442,9 @@ int bnxt_qplib_free_mrw(struct bnxt_qplib_res *res, struct bnxt_qplib_mrw *mrw) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_deallocate_key req; - struct creq_deallocate_key_resp *resp; + struct creq_deallocate_key_resp resp; u16 cmd_flags = 0; + int rc; if (mrw->lkey == 0xFFFFFFFF) { dev_info(&res->pdev->dev, @@ -536,27 +463,11 @@ int bnxt_qplib_free_mrw(struct bnxt_qplib_res *res, struct bnxt_qplib_mrw *mrw) else req.key = cpu_to_le32(mrw->lkey); - resp = (struct creq_deallocate_key_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&res->pdev->dev, "QPLIB: SP: FREE_MR send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&res->pdev->dev, "QPLIB: SP: FREE_MR timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&res->pdev->dev, "QPLIB: SP: FREE_MR failed "); - dev_err(&res->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, (void *)&resp, + NULL, 0); + if (rc) + return rc; + /* Free the qplib's MRW memory */ if (mrw->hwq.max_elements) bnxt_qplib_free_hwq(res->pdev, &mrw->hwq); @@ -568,9 +479,10 @@ int bnxt_qplib_alloc_mrw(struct bnxt_qplib_res *res, struct bnxt_qplib_mrw *mrw) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_allocate_mrw req; - struct creq_allocate_mrw_resp *resp; + struct creq_allocate_mrw_resp resp; u16 cmd_flags = 0; unsigned long tmp; + int rc; RCFW_CMD_PREP(req, ALLOCATE_MRW, cmd_flags); @@ -584,33 +496,17 @@ int bnxt_qplib_alloc_mrw(struct bnxt_qplib_res *res, struct bnxt_qplib_mrw *mrw) tmp = (unsigned long)mrw; req.mrw_handle = cpu_to_le64(tmp); - resp = (struct creq_allocate_mrw_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, 0); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: ALLOC_MRW send failed"); - return -EINVAL; - } - if (!bnxt_qplib_rcfw_wait_for_resp(rcfw, le16_to_cpu(req.cookie))) { - /* Cmd timed out */ - dev_err(&rcfw->pdev->dev, "QPLIB: SP: ALLOC_MRW timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: ALLOC_MRW failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); + if (rc) + return rc; + if ((mrw->type == CMDQ_ALLOCATE_MRW_MRW_FLAGS_MW_TYPE1) || (mrw->type == CMDQ_ALLOCATE_MRW_MRW_FLAGS_MW_TYPE2A) || (mrw->type == CMDQ_ALLOCATE_MRW_MRW_FLAGS_MW_TYPE2B)) - mrw->rkey = le32_to_cpu(resp->xid); + mrw->rkey = le32_to_cpu(resp.xid); else - mrw->lkey = le32_to_cpu(resp->xid); + mrw->lkey = le32_to_cpu(resp.xid); return 0; } @@ -619,40 +515,17 @@ int bnxt_qplib_dereg_mrw(struct bnxt_qplib_res *res, struct bnxt_qplib_mrw *mrw, { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_deregister_mr req; - struct creq_deregister_mr_resp *resp; + struct creq_deregister_mr_resp resp; u16 cmd_flags = 0; int rc; RCFW_CMD_PREP(req, DEREGISTER_MR, cmd_flags); req.lkey = cpu_to_le32(mrw->lkey); - resp = (struct creq_deregister_mr_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, block); - if (!resp) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: DEREG_MR send failed"); - return -EINVAL; - } - if (block) - rc = bnxt_qplib_rcfw_block_for_resp(rcfw, - le16_to_cpu(req.cookie)); - else - rc = bnxt_qplib_rcfw_wait_for_resp(rcfw, - le16_to_cpu(req.cookie)); - if (!rc) { - /* Cmd timed out */ - dev_err(&res->pdev->dev, "QPLIB: SP: DEREG_MR timed out"); - return -ETIMEDOUT; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&rcfw->pdev->dev, "QPLIB: SP: DEREG_MR failed "); - dev_err(&rcfw->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, block); + if (rc) + return rc; /* Free the qplib's MR memory */ if (mrw->hwq.max_elements) { @@ -669,7 +542,7 @@ int bnxt_qplib_reg_mr(struct bnxt_qplib_res *res, struct bnxt_qplib_mrw *mr, { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_register_mr req; - struct creq_register_mr_resp *resp; + struct creq_register_mr_resp resp; u16 cmd_flags = 0, level; int pg_ptrs, pages, i, rc; dma_addr_t **pbl_ptr; @@ -730,36 +603,11 @@ int bnxt_qplib_reg_mr(struct bnxt_qplib_res *res, struct bnxt_qplib_mrw *mr, req.key = cpu_to_le32(mr->lkey); req.mr_size = cpu_to_le64(mr->total_size); - resp = (struct creq_register_mr_resp *) - bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, - NULL, block); - if (!resp) { - dev_err(&res->pdev->dev, "SP: REG_MR send failed"); - rc = -EINVAL; + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, block); + if (rc) goto fail; - } - if (block) - rc = bnxt_qplib_rcfw_block_for_resp(rcfw, - le16_to_cpu(req.cookie)); - else - rc = bnxt_qplib_rcfw_wait_for_resp(rcfw, - le16_to_cpu(req.cookie)); - if (!rc) { - /* Cmd timed out */ - dev_err(&res->pdev->dev, "SP: REG_MR timed out"); - rc = -ETIMEDOUT; - goto fail; - } - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&res->pdev->dev, "QPLIB: SP: REG_MR failed "); - dev_err(&res->pdev->dev, - "QPLIB: SP: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - rc = -EINVAL; - goto fail; - } + return 0; fail: @@ -804,35 +652,15 @@ int bnxt_qplib_map_tc2cos(struct bnxt_qplib_res *res, u16 *cids) { struct bnxt_qplib_rcfw *rcfw = res->rcfw; struct cmdq_map_tc_to_cos req; - struct creq_map_tc_to_cos_resp *resp; + struct creq_map_tc_to_cos_resp resp; u16 cmd_flags = 0; - int tleft; + int rc = 0; RCFW_CMD_PREP(req, MAP_TC_TO_COS, cmd_flags); req.cos0 = cpu_to_le16(cids[0]); req.cos1 = cpu_to_le16(cids[1]); - resp = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, NULL, 0); - if (!resp) { - dev_err(&res->pdev->dev, "QPLIB: SP: MAP_TC2COS send failed"); - return -EINVAL; - } - - tleft = bnxt_qplib_rcfw_block_for_resp(rcfw, le16_to_cpu(req.cookie)); - if (!tleft) { - dev_err(&res->pdev->dev, "QPLIB: SP: MAP_TC2COS timed out"); - return -ETIMEDOUT; - } - - if (resp->status || - le16_to_cpu(resp->cookie) != le16_to_cpu(req.cookie)) { - dev_err(&res->pdev->dev, "QPLIB: SP: MAP_TC2COS failed "); - dev_err(&res->pdev->dev, - "QPLIB: with status 0x%x cmdq 0x%x resp 0x%x", - resp->status, le16_to_cpu(req.cookie), - le16_to_cpu(resp->cookie)); - return -EINVAL; - } - + rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req, + (void *)&resp, NULL, 0); return 0; } From 71df1d7ccad1c36f7321d6b3b48f2ea42681c363 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Thu, 18 May 2017 17:28:48 +0200 Subject: [PATCH 0779/1065] xen/blkback: don't free be structure too early MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The be structure must not be freed when freeing the blkif structure isn't done. Otherwise a use-after-free of be when unmapping the ring used for communicating with the frontend will occur in case of a late call of xenblk_disconnect() (e.g. due to an I/O still active when trying to disconnect). Signed-off-by: Juergen Gross Tested-by: Steven Haigh Acked-by: Roger Pau Monné Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 998915174bb8..4cdf0490983e 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -315,9 +315,10 @@ static int xen_blkif_disconnect(struct xen_blkif *blkif) static void xen_blkif_free(struct xen_blkif *blkif) { - - xen_blkif_disconnect(blkif); + WARN_ON(xen_blkif_disconnect(blkif)); xen_vbd_free(&blkif->vbd); + kfree(blkif->be->mode); + kfree(blkif->be); /* Make sure everything is drained before shutting down */ kmem_cache_free(xen_blkif_cachep, blkif); @@ -514,8 +515,6 @@ static int xen_blkbk_remove(struct xenbus_device *dev) xen_blkif_put(be->blkif); } - kfree(be->mode); - kfree(be); return 0; } From 20a3d5bf5e5b13c02450ab6178ec374abd830686 Mon Sep 17 00:00:00 2001 From: Mateusz Jurczyk Date: Tue, 13 Jun 2017 20:06:12 +0200 Subject: [PATCH 0780/1065] caif: Add sockaddr length check before accessing sa_family in connect handler Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in the connect() handler of the AF_CAIF socket. Since the syscall doesn't enforce a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing sa_family. Signed-off-by: Mateusz Jurczyk Signed-off-by: David S. Miller --- net/caif/caif_socket.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c index adcad344c843..21f18ea2fce4 100644 --- a/net/caif/caif_socket.c +++ b/net/caif/caif_socket.c @@ -754,6 +754,10 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr, lock_sock(sk); + err = -EINVAL; + if (addr_len < offsetofend(struct sockaddr, sa_family)) + goto out; + err = -EAFNOSUPPORT; if (uaddr->sa_family != AF_CAIF) goto out; From a24fa22ce22ae302b3bf8f7008896d52d5d57b8d Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Thu, 18 May 2017 17:28:49 +0200 Subject: [PATCH 0781/1065] xen/blkback: don't use xen_blkif_get() in xen-blkback kthread MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is no need to use xen_blkif_get()/xen_blkif_put() in the kthread of xen-blkback. Thread stopping is synchronous and using the blkif reference counting in the kthread will avoid to ever let the reference count drop to zero at the end of an I/O running concurrent to disconnecting and multiple rings. Setting ring->xenblkd to NULL after stopping the kthread isn't needed as the kthread does this already. Signed-off-by: Juergen Gross Tested-by: Steven Haigh Acked-by: Roger Pau Monné Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/blkback.c | 3 --- drivers/block/xen-blkback/xenbus.c | 1 - 2 files changed, 4 deletions(-) diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 726c32e35db9..6b14c509f3c7 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -609,8 +609,6 @@ int xen_blkif_schedule(void *arg) unsigned long timeout; int ret; - xen_blkif_get(blkif); - set_freezable(); while (!kthread_should_stop()) { if (try_to_freeze()) @@ -665,7 +663,6 @@ purge_gnt_list: print_stats(ring); ring->xenblkd = NULL; - xen_blkif_put(blkif); return 0; } diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 4cdf0490983e..792da683e70d 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -255,7 +255,6 @@ static int xen_blkif_disconnect(struct xen_blkif *blkif) if (ring->xenblkd) { kthread_stop(ring->xenblkd); wake_up(&ring->shutdown_wq); - ring->xenblkd = NULL; } /* The above kthread_stop() guarantees that at this point we From 089bc0143f489bd3a4578bdff5f4ca68fb26f341 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Jun 2017 16:28:27 -0400 Subject: [PATCH 0782/1065] xen-blkback: don't leak stack data via response ring Rather than constructing a local structure instance on the stack, fill the fields directly on the shared ring, just like other backends do. Build on the fact that all response structure flavors are actually identical (the old code did make this assumption too). This is XSA-216. Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich Reviewed-by: Konrad Rzeszutek Wilk Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/blkback.c | 23 ++++++++++++----------- drivers/block/xen-blkback/common.h | 25 +++++-------------------- 2 files changed, 17 insertions(+), 31 deletions(-) diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 6b14c509f3c7..0e824091a12f 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -1433,34 +1433,35 @@ static int dispatch_rw_block_io(struct xen_blkif_ring *ring, static void make_response(struct xen_blkif_ring *ring, u64 id, unsigned short op, int st) { - struct blkif_response resp; + struct blkif_response *resp; unsigned long flags; union blkif_back_rings *blk_rings; int notify; - resp.id = id; - resp.operation = op; - resp.status = st; - spin_lock_irqsave(&ring->blk_ring_lock, flags); blk_rings = &ring->blk_rings; /* Place on the response ring for the relevant domain. */ switch (ring->blkif->blk_protocol) { case BLKIF_PROTOCOL_NATIVE: - memcpy(RING_GET_RESPONSE(&blk_rings->native, blk_rings->native.rsp_prod_pvt), - &resp, sizeof(resp)); + resp = RING_GET_RESPONSE(&blk_rings->native, + blk_rings->native.rsp_prod_pvt); break; case BLKIF_PROTOCOL_X86_32: - memcpy(RING_GET_RESPONSE(&blk_rings->x86_32, blk_rings->x86_32.rsp_prod_pvt), - &resp, sizeof(resp)); + resp = RING_GET_RESPONSE(&blk_rings->x86_32, + blk_rings->x86_32.rsp_prod_pvt); break; case BLKIF_PROTOCOL_X86_64: - memcpy(RING_GET_RESPONSE(&blk_rings->x86_64, blk_rings->x86_64.rsp_prod_pvt), - &resp, sizeof(resp)); + resp = RING_GET_RESPONSE(&blk_rings->x86_64, + blk_rings->x86_64.rsp_prod_pvt); break; default: BUG(); } + + resp->id = id; + resp->operation = op; + resp->status = st; + blk_rings->common.rsp_prod_pvt++; RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(&blk_rings->common, notify); spin_unlock_irqrestore(&ring->blk_ring_lock, flags); diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 638597b17a38..ecb35fe8ca8d 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -75,9 +75,8 @@ extern unsigned int xenblk_max_queues; struct blkif_common_request { char dummy; }; -struct blkif_common_response { - char dummy; -}; + +/* i386 protocol version */ struct blkif_x86_32_request_rw { uint8_t nr_segments; /* number of segments */ @@ -129,14 +128,6 @@ struct blkif_x86_32_request { } u; } __attribute__((__packed__)); -/* i386 protocol version */ -#pragma pack(push, 4) -struct blkif_x86_32_response { - uint64_t id; /* copied from request */ - uint8_t operation; /* copied from request */ - int16_t status; /* BLKIF_RSP_??? */ -}; -#pragma pack(pop) /* x86_64 protocol version */ struct blkif_x86_64_request_rw { @@ -193,18 +184,12 @@ struct blkif_x86_64_request { } u; } __attribute__((__packed__)); -struct blkif_x86_64_response { - uint64_t __attribute__((__aligned__(8))) id; - uint8_t operation; /* copied from request */ - int16_t status; /* BLKIF_RSP_??? */ -}; - DEFINE_RING_TYPES(blkif_common, struct blkif_common_request, - struct blkif_common_response); + struct blkif_response); DEFINE_RING_TYPES(blkif_x86_32, struct blkif_x86_32_request, - struct blkif_x86_32_response); + struct blkif_response __packed); DEFINE_RING_TYPES(blkif_x86_64, struct blkif_x86_64_request, - struct blkif_x86_64_response); + struct blkif_response); union blkif_back_rings { struct blkif_back_ring native; From 377aa6b0efbaa29cfeecd8b9244641217f9544ca Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Wed, 14 Jun 2017 14:47:50 +1000 Subject: [PATCH 0783/1065] powerpc/npu-dma: Remove spurious WARN_ON when a PCI device has no of_node Commit 4c3b89effc28 ("powerpc/powernv: Add sanity checks to pnv_pci_get_{gpu|npu}_dev") introduced explicit warnings in pnv_pci_get_npu_dev() when a PCIe device has no associated device-tree node. However not all PCIe devices have an of_node and pnv_pci_get_npu_dev() gets indirectly called at least once for every PCIe device in the system. This results in spurious WARN_ON()'s so remove it. The same situation should not exist for pnv_pci_get_gpu_dev() as any NPU based PCIe device requires a device-tree node. Fixes: 4c3b89effc28 ("powerpc/powernv: Add sanity checks to pnv_pci_get_{gpu|npu}_dev") Reported-by: Alexey Kardashevskiy Signed-off-by: Alistair Popple Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/npu-dma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c index 78fa9395b8c5..e6f444b46207 100644 --- a/arch/powerpc/platforms/powernv/npu-dma.c +++ b/arch/powerpc/platforms/powernv/npu-dma.c @@ -75,7 +75,8 @@ struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index) if (WARN_ON(!gpdev)) return NULL; - if (WARN_ON(!gpdev->dev.of_node)) + /* Not all PCI devices have device-tree nodes */ + if (!gpdev->dev.of_node) return NULL; /* Get assoicated PCI device */ From 8bfb3676606454ffec836f56c5dc3e69dfc0956a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 14 Jun 2017 09:17:38 +0200 Subject: [PATCH 0784/1065] wireless: wext: remove ndo_do_ioctl fallback There are no longer any drivers (in the tree proper, I didn't check all the staging drivers) that take WEXT ioctls through this API, the only remaining ones that even have ndo_do_ioctl are using it only for private ioctls. Therefore, we can remove this call. Signed-off-by: Johannes Berg --- net/wireless/wext-core.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c index 1a4db6790e20..24ba8a99b946 100644 --- a/net/wireless/wext-core.c +++ b/net/wireless/wext-core.c @@ -957,9 +957,6 @@ static int wireless_process_ioctl(struct net *net, struct ifreq *ifr, else if (private) return private(dev, iwr, cmd, info, handler); } - /* Old driver API : call driver ioctl handler */ - if (dev->netdev_ops->ndo_do_ioctl) - return dev->netdev_ops->ndo_do_ioctl(dev, ifr, cmd); return -EOPNOTSUPP; } From e79b0006c45c9b0b22f3ea54ff6e256b34c1f208 Mon Sep 17 00:00:00 2001 From: Megha Dey Date: Wed, 14 Jun 2017 09:51:56 +0530 Subject: [PATCH 0785/1065] ALSA: hda - Add Coffelake PCI ID Coffelake is another Intel part, so need to add PCI ID for it. Signed-off-by: Megha Dey Signed-off-by: Subhransu S. Prusty Acked-by: Vinod Koul Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 1770f085c2a6..e3c696c46a21 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -371,9 +371,10 @@ enum { #define IS_KBL_H(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa2f0) #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98) #define IS_GLK(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x3198) +#define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348) #define IS_SKL_PLUS(pci) (IS_SKL(pci) || IS_SKL_LP(pci) || IS_BXT(pci)) || \ IS_KBL(pci) || IS_KBL_LP(pci) || IS_KBL_H(pci) || \ - IS_GLK(pci) + IS_GLK(pci) || IS_CFL(pci) static char *driver_short_names[] = { [AZX_DRIVER_ICH] = "HDA Intel", @@ -2378,6 +2379,9 @@ static const struct pci_device_id azx_ids[] = { /* Kabylake-H */ { PCI_DEVICE(0x8086, 0xa2f0), .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_SKYLAKE }, + /* Coffelake */ + { PCI_DEVICE(0x8086, 0xa348), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_SKYLAKE}, /* Broxton-P(Apollolake) */ { PCI_DEVICE(0x8086, 0x5a98), .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_BROXTON }, From c544ad18bd47ee989eb433f09b6574a7f6d415c7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 14 Jun 2017 12:40:36 +0200 Subject: [PATCH 0786/1065] video: fbdev: avoid int-in-bool-context warning gcc-7 suspects this code might be wrong because we use the result of a multiplication as a bool: drivers/video/fbdev/core/fbmon.c: In function 'fb_edid_add_monspecs': drivers/video/fbdev/core/fbmon.c:1051:84: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] It's actually fine, so let's add a comparison to zero to make that clear to the compiler too. Signed-off-by: Arnd Bergmann Cc: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/video/fbdev/core/fbmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/core/fbmon.c b/drivers/video/fbdev/core/fbmon.c index 687ebb053438..41d7979d81c5 100644 --- a/drivers/video/fbdev/core/fbmon.c +++ b/drivers/video/fbdev/core/fbmon.c @@ -1048,7 +1048,7 @@ void fb_edid_add_monspecs(unsigned char *edid, struct fb_monspecs *specs) for (i = 0; i < (128 - edid[2]) / DETAILED_TIMING_DESCRIPTION_SIZE; i++, block += DETAILED_TIMING_DESCRIPTION_SIZE) - if (PIXEL_CLOCK) + if (PIXEL_CLOCK != 0) edt[num++] = block - edid; /* Yikes, EDID data is totally useless */ From 1235185521ba0d9528052578e27c2f4999d489c6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 14 Jun 2017 12:40:36 +0200 Subject: [PATCH 0787/1065] video: fbdev: add missing USB-descriptor endianness conversions Add the missing endianness conversions when printing the USB device-descriptor idVendor, idProduct and bcdDevice fields during probe. Signed-off-by: Johan Hovold Cc: Steve Glendinning Cc: Bernie Thompson Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/video/fbdev/smscufx.c | 5 +++-- drivers/video/fbdev/udlfb.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/video/fbdev/smscufx.c b/drivers/video/fbdev/smscufx.c index ec2e7e353685..449fceaf79d5 100644 --- a/drivers/video/fbdev/smscufx.c +++ b/drivers/video/fbdev/smscufx.c @@ -1646,8 +1646,9 @@ static int ufx_usb_probe(struct usb_interface *interface, dev_dbg(dev->gdev, "%s %s - serial #%s\n", usbdev->manufacturer, usbdev->product, usbdev->serial); dev_dbg(dev->gdev, "vid_%04x&pid_%04x&rev_%04x driver's ufx_data struct at %p\n", - usbdev->descriptor.idVendor, usbdev->descriptor.idProduct, - usbdev->descriptor.bcdDevice, dev); + le16_to_cpu(usbdev->descriptor.idVendor), + le16_to_cpu(usbdev->descriptor.idProduct), + le16_to_cpu(usbdev->descriptor.bcdDevice), dev); dev_dbg(dev->gdev, "console enable=%d\n", console); dev_dbg(dev->gdev, "fb_defio enable=%d\n", fb_defio); diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c index 6a3c353de7c3..a868cbb51a34 100644 --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -1613,8 +1613,9 @@ static int dlfb_usb_probe(struct usb_interface *interface, pr_info("%s %s - serial #%s\n", usbdev->manufacturer, usbdev->product, usbdev->serial); pr_info("vid_%04x&pid_%04x&rev_%04x driver's dlfb_data struct at %p\n", - usbdev->descriptor.idVendor, usbdev->descriptor.idProduct, - usbdev->descriptor.bcdDevice, dev); + le16_to_cpu(usbdev->descriptor.idVendor), + le16_to_cpu(usbdev->descriptor.idProduct), + le16_to_cpu(usbdev->descriptor.bcdDevice), dev); pr_info("console enable=%d\n", console); pr_info("fb_defio enable=%d\n", fb_defio); pr_info("shadow enable=%d\n", shadow); From 484c7bbf2649831714da3a0fa30213977458e9b5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 14 Jun 2017 12:40:36 +0200 Subject: [PATCH 0788/1065] video: fbdev: via: remove possibly unused variables When CONFIG_PROC_FS is disabled, we get warnings about unused variables as remove_proc_entry() evaluates to an empty macro. drivers/video/fbdev/via/viafbdev.c: In function 'viafb_remove_proc': drivers/video/fbdev/via/viafbdev.c:1635:4: error: unused variable 'iga2_entry' [-Werror=unused-variable] drivers/video/fbdev/via/viafbdev.c:1634:4: error: unused variable 'iga1_entry' [-Werror=unused-variable] These are easy to avoid by using the pointer from the structure. Signed-off-by: Arnd Bergmann Cc: Florian Tobias Schandinat Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/video/fbdev/via/viafbdev.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/video/fbdev/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c index f9718f012aae..badee04ef496 100644 --- a/drivers/video/fbdev/via/viafbdev.c +++ b/drivers/video/fbdev/via/viafbdev.c @@ -1630,16 +1630,14 @@ static void viafb_init_proc(struct viafb_shared *shared) } static void viafb_remove_proc(struct viafb_shared *shared) { - struct proc_dir_entry *viafb_entry = shared->proc_entry, - *iga1_entry = shared->iga1_proc_entry, - *iga2_entry = shared->iga2_proc_entry; + struct proc_dir_entry *viafb_entry = shared->proc_entry; if (!viafb_entry) return; - remove_proc_entry("output_devices", iga2_entry); + remove_proc_entry("output_devices", shared->iga2_proc_entry); remove_proc_entry("iga2", viafb_entry); - remove_proc_entry("output_devices", iga1_entry); + remove_proc_entry("output_devices", shared->iga1_proc_entry); remove_proc_entry("iga1", viafb_entry); remove_proc_entry("supported_output_devices", viafb_entry); From b429f96aa5cb4023b915de9c2aa6e7720a939856 Mon Sep 17 00:00:00 2001 From: Mike Gerow Date: Wed, 14 Jun 2017 12:40:36 +0200 Subject: [PATCH 0789/1065] video: fbdev: udlfb: drop log level for blanking Drop log level for blanking from info to debug. Xorg likes to habitually unblank when already unblanked and this can fill up logs over a long period of time. Signed-off-by: Mike Gerow Cc: bernie@plugable.com Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/video/fbdev/udlfb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c index a868cbb51a34..05ef657235df 100644 --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -1105,8 +1105,8 @@ static int dlfb_ops_blank(int blank_mode, struct fb_info *info) char *bufptr; struct urb *urb; - pr_info("/dev/fb%d FB_BLANK mode %d --> %d\n", - info->node, dev->blank_mode, blank_mode); + pr_debug("/dev/fb%d FB_BLANK mode %d --> %d\n", + info->node, dev->blank_mode, blank_mode); if ((dev->blank_mode == FB_BLANK_POWERDOWN) && (blank_mode != FB_BLANK_POWERDOWN)) { From 1e3d0c2c70cd3edb5deed186c5f5c75f2b84a633 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 14 Jun 2017 13:34:05 +0300 Subject: [PATCH 0790/1065] xfrm: Oops on error in pfkey_msg2xfrm_state() There are some missing error codes here so we accidentally return NULL instead of an error pointer. It results in a NULL pointer dereference. Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Dan Carpenter Signed-off-by: Steffen Klassert --- net/key/af_key.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index 5103f92e2eb0..2b82adac5d8e 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -1168,8 +1168,10 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, if (key) keysize = (key->sadb_key_bits + 7) / 8; x->aalg = kmalloc(sizeof(*x->aalg) + keysize, GFP_KERNEL); - if (!x->aalg) + if (!x->aalg) { + err = -ENOMEM; goto out; + } strcpy(x->aalg->alg_name, a->name); x->aalg->alg_key_len = 0; if (key) { @@ -1188,8 +1190,10 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, goto out; } x->calg = kmalloc(sizeof(*x->calg), GFP_KERNEL); - if (!x->calg) + if (!x->calg) { + err = -ENOMEM; goto out; + } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; } else { @@ -1203,8 +1207,10 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, if (key) keysize = (key->sadb_key_bits + 7) / 8; x->ealg = kmalloc(sizeof(*x->ealg) + keysize, GFP_KERNEL); - if (!x->ealg) + if (!x->ealg) { + err = -ENOMEM; goto out; + } strcpy(x->ealg->alg_name, a->name); x->ealg->alg_key_len = 0; if (key) { @@ -1249,8 +1255,10 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, struct xfrm_encap_tmpl *natt; x->encap = kmalloc(sizeof(*x->encap), GFP_KERNEL); - if (!x->encap) + if (!x->encap) { + err = -ENOMEM; goto out; + } natt = x->encap; n_type = ext_hdrs[SADB_X_EXT_NAT_T_TYPE-1]; From e747f64336fc15e1c823344942923195b800aa1e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 14 Jun 2017 13:35:37 +0300 Subject: [PATCH 0791/1065] xfrm: NULL dereference on allocation failure The default error code in pfkey_msg2xfrm_state() is -ENOBUFS. We added a new call to security_xfrm_state_alloc() which sets "err" to zero so there several places where we can return ERR_PTR(0) if kmalloc() fails. The caller is expecting error pointers so it leads to a NULL dereference. Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Dan Carpenter Signed-off-by: Steffen Klassert --- net/key/af_key.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/key/af_key.c b/net/key/af_key.c index 2b82adac5d8e..b1432b668033 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -1157,6 +1157,7 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, goto out; } + err = -ENOBUFS; key = ext_hdrs[SADB_EXT_KEY_AUTH - 1]; if (sa->sadb_sa_auth) { int keysize = 0; From ed6456afef0da57edfd87ce9142813d08a571137 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 14 Jun 2017 12:10:56 +0300 Subject: [PATCH 0792/1065] Staging: rtl8723bs: fix an error code in isFileReadable() The caller only cares about zero vs non-zero so this code actually works fine but we should be returning a negative error code instead of a valid pointer casted to int. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8723bs/os_dep/osdep_service.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8723bs/os_dep/osdep_service.c b/drivers/staging/rtl8723bs/os_dep/osdep_service.c index 02db59e8b593..aa16d1ab955b 100644 --- a/drivers/staging/rtl8723bs/os_dep/osdep_service.c +++ b/drivers/staging/rtl8723bs/os_dep/osdep_service.c @@ -160,7 +160,7 @@ static int isFileReadable(char *path) oldfs = get_fs(); set_fs(get_ds()); if (1!=readFile(fp, &buf, 1)) - ret = PTR_ERR(fp); + ret = -EINVAL; set_fs(oldfs); filp_close(fp, NULL); From 4f39a1f5870104b1670df2c09c831ac281896545 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 14 Jun 2017 09:21:58 +0200 Subject: [PATCH 0793/1065] wireless: wext: use struct iwreq earlier in the call chain To make it clear that we never use struct ifreq, cast from it directly in the wext entrypoint and use struct iwreq from there on. The next patch will remove the cast again and pass the correct struct from the beginning. Signed-off-by: Johannes Berg --- net/wireless/wext-core.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c index 24ba8a99b946..12949c8d3e5f 100644 --- a/net/wireless/wext-core.c +++ b/net/wireless/wext-core.c @@ -914,13 +914,12 @@ int call_commit_handler(struct net_device *dev) * Main IOCTl dispatcher. * Check the type of IOCTL and call the appropriate wrapper... */ -static int wireless_process_ioctl(struct net *net, struct ifreq *ifr, +static int wireless_process_ioctl(struct net *net, struct iwreq *iwr, unsigned int cmd, struct iw_request_info *info, wext_ioctl_func standard, wext_ioctl_func private) { - struct iwreq *iwr = (struct iwreq *) ifr; struct net_device *dev; iw_handler handler; @@ -928,7 +927,7 @@ static int wireless_process_ioctl(struct net *net, struct ifreq *ifr, * The copy_to/from_user() of ifr is also dealt with in there */ /* Make sure the device exist */ - if ((dev = __dev_get_by_name(net, ifr->ifr_name)) == NULL) + if ((dev = __dev_get_by_name(net, iwr->ifr_name)) == NULL) return -ENODEV; /* A bunch of special cases, then the generic case... @@ -974,7 +973,7 @@ static int wext_permission_check(unsigned int cmd) } /* entry point from dev ioctl */ -static int wext_ioctl_dispatch(struct net *net, struct ifreq *ifr, +static int wext_ioctl_dispatch(struct net *net, struct iwreq *iwr, unsigned int cmd, struct iw_request_info *info, wext_ioctl_func standard, wext_ioctl_func private) @@ -984,9 +983,9 @@ static int wext_ioctl_dispatch(struct net *net, struct ifreq *ifr, if (ret) return ret; - dev_load(net, ifr->ifr_name); + dev_load(net, iwr->ifr_name); rtnl_lock(); - ret = wireless_process_ioctl(net, ifr, cmd, info, standard, private); + ret = wireless_process_ioctl(net, iwr, cmd, info, standard, private); rtnl_unlock(); return ret; @@ -1042,7 +1041,7 @@ int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd, struct iw_request_info info = { .cmd = cmd, .flags = 0 }; int ret; - ret = wext_ioctl_dispatch(net, ifr, cmd, &info, + ret = wext_ioctl_dispatch(net, (void *)ifr, cmd, &info, ioctl_standard_call, ioctl_private_call); if (ret >= 0 && @@ -1104,7 +1103,7 @@ int compat_wext_handle_ioctl(struct net *net, unsigned int cmd, info.cmd = cmd; info.flags = IW_REQUEST_FLAG_COMPAT; - ret = wext_ioctl_dispatch(net, (struct ifreq *) &iwr, cmd, &info, + ret = wext_ioctl_dispatch(net, &iwr, cmd, &info, compat_standard_call, compat_private_call); From 68dd02d19c811ca8ea60220a9d73e13b4bdad73a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 14 Jun 2017 09:28:11 +0200 Subject: [PATCH 0794/1065] dev_ioctl: copy only the smaller struct iwreq for wext Unfortunately, struct iwreq isn't a proper subset of struct ifreq, but is still handled by the same code path. Robert reported that then applications may (randomly) fault if the struct iwreq they pass happens to land within 8 bytes of the end of a mapping (the struct is only 32 bytes, vs. struct ifreq's 40 bytes). To fix this, pull out the code handling wireless extension ioctls and copy only the smaller structure in this case. This bug goes back a long time, I tracked that it was introduced into mainline in 2.1.15, over 20 years ago! This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195869 Reported-by: Robert O'Callahan Signed-off-by: Johannes Berg --- include/net/wext.h | 4 ++-- net/core/dev_ioctl.c | 19 ++++++++++++++++--- net/wireless/wext-core.c | 6 +++--- 3 files changed, 21 insertions(+), 8 deletions(-) diff --git a/include/net/wext.h b/include/net/wext.h index 345911965dbb..454ff763eeba 100644 --- a/include/net/wext.h +++ b/include/net/wext.h @@ -6,7 +6,7 @@ struct net; #ifdef CONFIG_WEXT_CORE -int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd, +int wext_handle_ioctl(struct net *net, struct iwreq *iwr, unsigned int cmd, void __user *arg); int compat_wext_handle_ioctl(struct net *net, unsigned int cmd, unsigned long arg); @@ -14,7 +14,7 @@ int compat_wext_handle_ioctl(struct net *net, unsigned int cmd, struct iw_statistics *get_wireless_stats(struct net_device *dev); int call_commit_handler(struct net_device *dev); #else -static inline int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd, +static inline int wext_handle_ioctl(struct net *net, struct iwreq *iwr, unsigned int cmd, void __user *arg) { return -EINVAL; diff --git a/net/core/dev_ioctl.c b/net/core/dev_ioctl.c index b94b1d293506..27fad31784a8 100644 --- a/net/core/dev_ioctl.c +++ b/net/core/dev_ioctl.c @@ -410,6 +410,22 @@ int dev_ioctl(struct net *net, unsigned int cmd, void __user *arg) if (cmd == SIOCGIFNAME) return dev_ifname(net, (struct ifreq __user *)arg); + /* + * Take care of Wireless Extensions. Unfortunately struct iwreq + * isn't a proper subset of struct ifreq (it's 8 byte shorter) + * so we need to treat it specially, otherwise applications may + * fault if the struct they're passing happens to land at the + * end of a mapped page. + */ + if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) { + struct iwreq iwr; + + if (copy_from_user(&iwr, arg, sizeof(iwr))) + return -EFAULT; + + return wext_handle_ioctl(net, &iwr, cmd, arg); + } + if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) return -EFAULT; @@ -559,9 +575,6 @@ int dev_ioctl(struct net *net, unsigned int cmd, void __user *arg) ret = -EFAULT; return ret; } - /* Take care of Wireless Extensions */ - if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) - return wext_handle_ioctl(net, &ifr, cmd, arg); return -ENOTTY; } } diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c index 12949c8d3e5f..6cdb054484d6 100644 --- a/net/wireless/wext-core.c +++ b/net/wireless/wext-core.c @@ -1035,18 +1035,18 @@ static int ioctl_standard_call(struct net_device * dev, } -int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd, +int wext_handle_ioctl(struct net *net, struct iwreq *iwr, unsigned int cmd, void __user *arg) { struct iw_request_info info = { .cmd = cmd, .flags = 0 }; int ret; - ret = wext_ioctl_dispatch(net, (void *)ifr, cmd, &info, + ret = wext_ioctl_dispatch(net, iwr, cmd, &info, ioctl_standard_call, ioctl_private_call); if (ret >= 0 && IW_IS_GET(cmd) && - copy_to_user(arg, ifr, sizeof(struct iwreq))) + copy_to_user(arg, iwr, sizeof(struct iwreq))) return -EFAULT; return ret; From c0f83da96b906ea331e2eea2bd5d2e7f221d27ab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 18 May 2017 10:31:01 +0200 Subject: [PATCH 0795/1065] drm/radeon: fix "force the UVD DPB into VRAM as well" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DPB must be in VRAM, but not in the first segment. Signed-off-by: Christian König Tested-by: Arthur Marsh Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_uvd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 7431eb4a11b7..d34d1cf33895 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -621,7 +621,7 @@ static int radeon_uvd_cs_reloc(struct radeon_cs_parser *p, } /* TODO: is this still necessary on NI+ ? */ - if ((cmd == 0 || cmd == 1 || cmd == 0x3) && + if ((cmd == 0 || cmd == 0x3) && (start >> 28) != (p->rdev->uvd.gpu_addr >> 28)) { DRM_ERROR("msg/fb buffer %LX-%LX out of 256MB segment!\n", start, end); From bea10413934dcf98cb9b2dfcdc56e1d28f192897 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Tue, 13 Jun 2017 07:17:10 +0200 Subject: [PATCH 0796/1065] drm/amdgpu: Fix overflow of watermark calcs at > 4k resolutions. Commit d63c277dc672e0 ("drm/amdgpu: Make display watermark calculations more accurate") made watermark calculations more accurate, but not for > 4k resolutions on 32-Bit architectures, as it introduced an integer overflow for those setups and resolutions. Fix this by proper u64 casting and division. Signed-off-by: Mario Kleiner Reported-by: Ben Hutchings Fixes: d63c277dc672 ("drm/amdgpu: Make display watermark calculations more accurate") Cc: Ben Hutchings Cc: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 7 +++++-- drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 7 +++++-- drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 7 +++++-- drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 7 +++++-- 4 files changed, 20 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c index 0cdeb6a2e4a0..5dffa27afa45 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c @@ -1207,8 +1207,11 @@ static void dce_v10_0_program_watermarks(struct amdgpu_device *adev, u32 tmp, wm_mask, lb_vblank_lead_lines = 0; if (amdgpu_crtc->base.enabled && num_heads && mode) { - active_time = 1000000UL * (u32)mode->crtc_hdisplay / (u32)mode->clock; - line_time = min((u32) (1000000UL * (u32)mode->crtc_htotal / (u32)mode->clock), (u32)65535); + active_time = (u32) div_u64((u64)mode->crtc_hdisplay * 1000000, + (u32)mode->clock); + line_time = (u32) div_u64((u64)mode->crtc_htotal * 1000000, + (u32)mode->clock); + line_time = min(line_time, (u32)65535); /* watermark for high clocks */ if (adev->pm.dpm_enabled) { diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c index 773654a19749..47bbc87f96d2 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c @@ -1176,8 +1176,11 @@ static void dce_v11_0_program_watermarks(struct amdgpu_device *adev, u32 tmp, wm_mask, lb_vblank_lead_lines = 0; if (amdgpu_crtc->base.enabled && num_heads && mode) { - active_time = 1000000UL * (u32)mode->crtc_hdisplay / (u32)mode->clock; - line_time = min((u32) (1000000UL * (u32)mode->crtc_htotal / (u32)mode->clock), (u32)65535); + active_time = (u32) div_u64((u64)mode->crtc_hdisplay * 1000000, + (u32)mode->clock); + line_time = (u32) div_u64((u64)mode->crtc_htotal * 1000000, + (u32)mode->clock); + line_time = min(line_time, (u32)65535); /* watermark for high clocks */ if (adev->pm.dpm_enabled) { diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c index 1f3552967ba3..d8c9a959493e 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c @@ -983,8 +983,11 @@ static void dce_v6_0_program_watermarks(struct amdgpu_device *adev, fixed20_12 a, b, c; if (amdgpu_crtc->base.enabled && num_heads && mode) { - active_time = 1000000UL * (u32)mode->crtc_hdisplay / (u32)mode->clock; - line_time = min((u32) (1000000UL * (u32)mode->crtc_htotal / (u32)mode->clock), (u32)65535); + active_time = (u32) div_u64((u64)mode->crtc_hdisplay * 1000000, + (u32)mode->clock); + line_time = (u32) div_u64((u64)mode->crtc_htotal * 1000000, + (u32)mode->clock); + line_time = min(line_time, (u32)65535); priority_a_cnt = 0; priority_b_cnt = 0; diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c index 3c558c170e5e..db30c6ba563a 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c @@ -1091,8 +1091,11 @@ static void dce_v8_0_program_watermarks(struct amdgpu_device *adev, u32 tmp, wm_mask, lb_vblank_lead_lines = 0; if (amdgpu_crtc->base.enabled && num_heads && mode) { - active_time = 1000000UL * (u32)mode->crtc_hdisplay / (u32)mode->clock; - line_time = min((u32) (1000000UL * (u32)mode->crtc_htotal / (u32)mode->clock), (u32)65535); + active_time = (u32) div_u64((u64)mode->crtc_hdisplay * 1000000, + (u32)mode->clock); + line_time = (u32) div_u64((u64)mode->crtc_htotal * 1000000, + (u32)mode->clock); + line_time = min(line_time, (u32)65535); /* watermark for high clocks */ if (adev->pm.dpm_enabled) { From 55f61a040e1b1ea0ba962e53ae341b4c51915bd1 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Tue, 13 Jun 2017 07:17:11 +0200 Subject: [PATCH 0797/1065] drm/radeon: Fix overflow of watermark calcs at > 4k resolutions. Commit e6b9a6c84b93 ("drm/radeon: Make display watermark calculations more accurate") made watermark calculations more accurate, but not for > 4k resolutions on 32-Bit architectures, as it introduced an integer overflow for those setups and resolutions. Fix this by proper u64 casting and division. Signed-off-by: Mario Kleiner Reported-by: Ben Hutchings Fixes: e6b9a6c84b93 ("drm/radeon: Make display watermark calculations more accurate") Cc: Ben Hutchings Cc: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 7 +++++-- drivers/gpu/drm/radeon/evergreen.c | 7 +++++-- drivers/gpu/drm/radeon/si.c | 7 +++++-- 3 files changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 008c145b7f29..ca44233ceacc 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -9267,8 +9267,11 @@ static void dce8_program_watermarks(struct radeon_device *rdev, u32 tmp, wm_mask; if (radeon_crtc->base.enabled && num_heads && mode) { - active_time = 1000000UL * (u32)mode->crtc_hdisplay / (u32)mode->clock; - line_time = min((u32) (1000000UL * (u32)mode->crtc_htotal / (u32)mode->clock), (u32)65535); + active_time = (u32) div_u64((u64)mode->crtc_hdisplay * 1000000, + (u32)mode->clock); + line_time = (u32) div_u64((u64)mode->crtc_htotal * 1000000, + (u32)mode->clock); + line_time = min(line_time, (u32)65535); /* watermark for high clocks */ if ((rdev->pm.pm_method == PM_METHOD_DPM) && diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 0bf103536404..534637203e70 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2266,8 +2266,11 @@ static void evergreen_program_watermarks(struct radeon_device *rdev, fixed20_12 a, b, c; if (radeon_crtc->base.enabled && num_heads && mode) { - active_time = 1000000UL * (u32)mode->crtc_hdisplay / (u32)mode->clock; - line_time = min((u32) (1000000UL * (u32)mode->crtc_htotal / (u32)mode->clock), (u32)65535); + active_time = (u32) div_u64((u64)mode->crtc_hdisplay * 1000000, + (u32)mode->clock); + line_time = (u32) div_u64((u64)mode->crtc_htotal * 1000000, + (u32)mode->clock); + line_time = min(line_time, (u32)65535); priority_a_cnt = 0; priority_b_cnt = 0; dram_channels = evergreen_get_number_of_dram_channels(rdev); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 76d1888528e6..5303f25d5280 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2284,8 +2284,11 @@ static void dce6_program_watermarks(struct radeon_device *rdev, fixed20_12 a, b, c; if (radeon_crtc->base.enabled && num_heads && mode) { - active_time = 1000000UL * (u32)mode->crtc_hdisplay / (u32)mode->clock; - line_time = min((u32) (1000000UL * (u32)mode->crtc_htotal / (u32)mode->clock), (u32)65535); + active_time = (u32) div_u64((u64)mode->crtc_hdisplay * 1000000, + (u32)mode->clock); + line_time = (u32) div_u64((u64)mode->crtc_htotal * 1000000, + (u32)mode->clock); + line_time = min(line_time, (u32)65535); priority_a_cnt = 0; priority_b_cnt = 0; From 4130b28f568688f79539b732797a1dc04b048442 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 6 Jun 2017 13:55:42 +0200 Subject: [PATCH 0798/1065] s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL This reverts the two commits 7afbeb6df2aa ("s390/ipl: always use load normal for CCW-type re-IPL") 0f7451ff3ab8 ("s390/ipl: use load normal for LPAR re-ipl") The two commits did not take into account that behavior of standby memory changes fundamentally if the re-IPL method is changed from Load Clear to Load Normal. In case of the old re-IPL clear method all memory that was initially in standby state will be put into standby state again within the re-IPL process. Or in other words: memory that was brought online before a re-IPL will be offline again after a reboot. Given that we use different re-IPL methods depending on the hypervisor and CCW-type vs SCSI re-IPL it is not easy to tell in advance when and why memory will stay online or will be offline after a re-IPL. This does also have other side effects, since memory that is online from the beginning will be in ZONE_NORMAL by default vs ZONE_MOVABLE for memory that is offline. Therefore, before the change, a user could online and offline memory easily since standby memory was always in ZONE_NORMAL. After the change, and a re-IPL, this depended on which memory parts were online before the re-IPL. From a usability point of view the current behavior is more than suboptimal. Therefore revert these changes until we have a better solution and get back to a consistent behavior. The bad thing about this is that the time required for a re-IPL will be significantly increased for configurations with several 100GB or 1TB of memory. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index e545ffe5155a..8e622bb52f7a 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -564,8 +564,6 @@ static struct kset *ipl_kset; static void __ipl_run(void *unused) { - if (MACHINE_IS_LPAR && ipl_info.type == IPL_TYPE_CCW) - diag308(DIAG308_LOAD_NORMAL_DUMP, NULL); diag308(DIAG308_LOAD_CLEAR, NULL); if (MACHINE_IS_VM) __cpcmd("IPL", NULL, 0, NULL); @@ -1088,10 +1086,7 @@ static void __reipl_run(void *unused) break; case REIPL_METHOD_CCW_DIAG: diag308(DIAG308_SET, reipl_block_ccw); - if (MACHINE_IS_LPAR) - diag308(DIAG308_LOAD_NORMAL_DUMP, NULL); - else - diag308(DIAG308_LOAD_CLEAR, NULL); + diag308(DIAG308_LOAD_CLEAR, NULL); break; case REIPL_METHOD_FCP_RW_DIAG: diag308(DIAG308_SET, reipl_block_fcp); From 2deaeaf102d692cb6f764123b1df7aa118a8e97c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 14 Jun 2017 16:20:32 +0200 Subject: [PATCH 0799/1065] ALSA: pcm: Don't treat NULL chmap as a fatal error The standard PCM chmap helper callbacks treat the NULL info->chmap as a fatal error and spews the kernel warning with stack trace when CONFIG_SND_DEBUG is on. This was OK, originally it was supposed to be always static and non-NULL. But, as the recent addition of Intel LPE audio driver shows, the chmap content may vary dynamically, and it can be even NULL when disconnected. The user still sees the kernel warning unnecessarily. For clearing such a confusion, this patch simply removes the snd_BUG_ON() in each place, just returns an error without warning. Cc: # v4.11+ Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 5088d4b8db22..009e6c98754e 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -2492,7 +2492,7 @@ static int pcm_chmap_ctl_get(struct snd_kcontrol *kcontrol, struct snd_pcm_substream *substream; const struct snd_pcm_chmap_elem *map; - if (snd_BUG_ON(!info->chmap)) + if (!info->chmap) return -EINVAL; substream = snd_pcm_chmap_substream(info, idx); if (!substream) @@ -2524,7 +2524,7 @@ static int pcm_chmap_ctl_tlv(struct snd_kcontrol *kcontrol, int op_flag, unsigned int __user *dst; int c, count = 0; - if (snd_BUG_ON(!info->chmap)) + if (!info->chmap) return -EINVAL; if (size < 8) return -ENOMEM; From 9152e0b722b29092115da3bfbf63d26be1a461df Mon Sep 17 00:00:00 2001 From: Eddie Wai Date: Wed, 14 Jun 2017 03:26:23 -0700 Subject: [PATCH 0800/1065] RDMA/bnxt_re: HW workarounds for handling specific conditions This patch implements the following HW workarounds 1. The SQ depth needs to be augmented by 128 + 1 to avoid running into an Out of order CQE issue 2. Workaround to handle the problem where the HW fast path engine continues to access DMA memory in retranmission mode even after the WQE has already been completed. If the HW reports this condition, driver detects it and posts a Fence WQE. The driver stops reporting the completions to stack until it receives completion for Fence WQE. Signed-off-by: Eddie Wai Signed-off-by: Sriharsha Basavapatna Signed-off-by: Selvin Xavier Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/bnxt_re/ib_verbs.c | 373 +++++++++++++++++++--- drivers/infiniband/hw/bnxt_re/ib_verbs.h | 15 + drivers/infiniband/hw/bnxt_re/qplib_fp.c | 166 ++++++++-- drivers/infiniband/hw/bnxt_re/qplib_fp.h | 17 +- drivers/infiniband/hw/bnxt_re/qplib_res.h | 1 - drivers/infiniband/hw/bnxt_re/qplib_sp.c | 5 + drivers/infiniband/hw/bnxt_re/qplib_sp.h | 2 + 7 files changed, 509 insertions(+), 70 deletions(-) diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index 7ba9e699d7ab..169798752895 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -61,6 +61,48 @@ #include "ib_verbs.h" #include +static int __from_ib_access_flags(int iflags) +{ + int qflags = 0; + + if (iflags & IB_ACCESS_LOCAL_WRITE) + qflags |= BNXT_QPLIB_ACCESS_LOCAL_WRITE; + if (iflags & IB_ACCESS_REMOTE_READ) + qflags |= BNXT_QPLIB_ACCESS_REMOTE_READ; + if (iflags & IB_ACCESS_REMOTE_WRITE) + qflags |= BNXT_QPLIB_ACCESS_REMOTE_WRITE; + if (iflags & IB_ACCESS_REMOTE_ATOMIC) + qflags |= BNXT_QPLIB_ACCESS_REMOTE_ATOMIC; + if (iflags & IB_ACCESS_MW_BIND) + qflags |= BNXT_QPLIB_ACCESS_MW_BIND; + if (iflags & IB_ZERO_BASED) + qflags |= BNXT_QPLIB_ACCESS_ZERO_BASED; + if (iflags & IB_ACCESS_ON_DEMAND) + qflags |= BNXT_QPLIB_ACCESS_ON_DEMAND; + return qflags; +}; + +static enum ib_access_flags __to_ib_access_flags(int qflags) +{ + enum ib_access_flags iflags = 0; + + if (qflags & BNXT_QPLIB_ACCESS_LOCAL_WRITE) + iflags |= IB_ACCESS_LOCAL_WRITE; + if (qflags & BNXT_QPLIB_ACCESS_REMOTE_WRITE) + iflags |= IB_ACCESS_REMOTE_WRITE; + if (qflags & BNXT_QPLIB_ACCESS_REMOTE_READ) + iflags |= IB_ACCESS_REMOTE_READ; + if (qflags & BNXT_QPLIB_ACCESS_REMOTE_ATOMIC) + iflags |= IB_ACCESS_REMOTE_ATOMIC; + if (qflags & BNXT_QPLIB_ACCESS_MW_BIND) + iflags |= IB_ACCESS_MW_BIND; + if (qflags & BNXT_QPLIB_ACCESS_ZERO_BASED) + iflags |= IB_ZERO_BASED; + if (qflags & BNXT_QPLIB_ACCESS_ON_DEMAND) + iflags |= IB_ACCESS_ON_DEMAND; + return iflags; +}; + static int bnxt_re_build_sgl(struct ib_sge *ib_sg_list, struct bnxt_qplib_sge *sg_list, int num) { @@ -410,6 +452,158 @@ enum rdma_link_layer bnxt_re_get_link_layer(struct ib_device *ibdev, return IB_LINK_LAYER_ETHERNET; } +#define BNXT_RE_FENCE_PBL_SIZE DIV_ROUND_UP(BNXT_RE_FENCE_BYTES, PAGE_SIZE) + +static void bnxt_re_create_fence_wqe(struct bnxt_re_pd *pd) +{ + struct bnxt_re_fence_data *fence = &pd->fence; + struct ib_mr *ib_mr = &fence->mr->ib_mr; + struct bnxt_qplib_swqe *wqe = &fence->bind_wqe; + + memset(wqe, 0, sizeof(*wqe)); + wqe->type = BNXT_QPLIB_SWQE_TYPE_BIND_MW; + wqe->wr_id = BNXT_QPLIB_FENCE_WRID; + wqe->flags |= BNXT_QPLIB_SWQE_FLAGS_SIGNAL_COMP; + wqe->flags |= BNXT_QPLIB_SWQE_FLAGS_UC_FENCE; + wqe->bind.zero_based = false; + wqe->bind.parent_l_key = ib_mr->lkey; + wqe->bind.va = (u64)(unsigned long)fence->va; + wqe->bind.length = fence->size; + wqe->bind.access_cntl = __from_ib_access_flags(IB_ACCESS_REMOTE_READ); + wqe->bind.mw_type = SQ_BIND_MW_TYPE_TYPE1; + + /* Save the initial rkey in fence structure for now; + * wqe->bind.r_key will be set at (re)bind time. + */ + fence->bind_rkey = ib_inc_rkey(fence->mw->rkey); +} + +static int bnxt_re_bind_fence_mw(struct bnxt_qplib_qp *qplib_qp) +{ + struct bnxt_re_qp *qp = container_of(qplib_qp, struct bnxt_re_qp, + qplib_qp); + struct ib_pd *ib_pd = qp->ib_qp.pd; + struct bnxt_re_pd *pd = container_of(ib_pd, struct bnxt_re_pd, ib_pd); + struct bnxt_re_fence_data *fence = &pd->fence; + struct bnxt_qplib_swqe *fence_wqe = &fence->bind_wqe; + struct bnxt_qplib_swqe wqe; + int rc; + + memcpy(&wqe, fence_wqe, sizeof(wqe)); + wqe.bind.r_key = fence->bind_rkey; + fence->bind_rkey = ib_inc_rkey(fence->bind_rkey); + + dev_dbg(rdev_to_dev(qp->rdev), + "Posting bind fence-WQE: rkey: %#x QP: %d PD: %p\n", + wqe.bind.r_key, qp->qplib_qp.id, pd); + rc = bnxt_qplib_post_send(&qp->qplib_qp, &wqe); + if (rc) { + dev_err(rdev_to_dev(qp->rdev), "Failed to bind fence-WQE\n"); + return rc; + } + bnxt_qplib_post_send_db(&qp->qplib_qp); + + return rc; +} + +static void bnxt_re_destroy_fence_mr(struct bnxt_re_pd *pd) +{ + struct bnxt_re_fence_data *fence = &pd->fence; + struct bnxt_re_dev *rdev = pd->rdev; + struct device *dev = &rdev->en_dev->pdev->dev; + struct bnxt_re_mr *mr = fence->mr; + + if (fence->mw) { + bnxt_re_dealloc_mw(fence->mw); + fence->mw = NULL; + } + if (mr) { + if (mr->ib_mr.rkey) + bnxt_qplib_dereg_mrw(&rdev->qplib_res, &mr->qplib_mr, + true); + if (mr->ib_mr.lkey) + bnxt_qplib_free_mrw(&rdev->qplib_res, &mr->qplib_mr); + kfree(mr); + fence->mr = NULL; + } + if (fence->dma_addr) { + dma_unmap_single(dev, fence->dma_addr, BNXT_RE_FENCE_BYTES, + DMA_BIDIRECTIONAL); + fence->dma_addr = 0; + } +} + +static int bnxt_re_create_fence_mr(struct bnxt_re_pd *pd) +{ + int mr_access_flags = IB_ACCESS_LOCAL_WRITE | IB_ACCESS_MW_BIND; + struct bnxt_re_fence_data *fence = &pd->fence; + struct bnxt_re_dev *rdev = pd->rdev; + struct device *dev = &rdev->en_dev->pdev->dev; + struct bnxt_re_mr *mr = NULL; + dma_addr_t dma_addr = 0; + struct ib_mw *mw; + u64 pbl_tbl; + int rc; + + dma_addr = dma_map_single(dev, fence->va, BNXT_RE_FENCE_BYTES, + DMA_BIDIRECTIONAL); + rc = dma_mapping_error(dev, dma_addr); + if (rc) { + dev_err(rdev_to_dev(rdev), "Failed to dma-map fence-MR-mem\n"); + rc = -EIO; + fence->dma_addr = 0; + goto fail; + } + fence->dma_addr = dma_addr; + + /* Allocate a MR */ + mr = kzalloc(sizeof(*mr), GFP_KERNEL); + if (!mr) { + rc = -ENOMEM; + goto fail; + } + fence->mr = mr; + mr->rdev = rdev; + mr->qplib_mr.pd = &pd->qplib_pd; + mr->qplib_mr.type = CMDQ_ALLOCATE_MRW_MRW_FLAGS_PMR; + mr->qplib_mr.flags = __from_ib_access_flags(mr_access_flags); + rc = bnxt_qplib_alloc_mrw(&rdev->qplib_res, &mr->qplib_mr); + if (rc) { + dev_err(rdev_to_dev(rdev), "Failed to alloc fence-HW-MR\n"); + goto fail; + } + + /* Register MR */ + mr->ib_mr.lkey = mr->qplib_mr.lkey; + mr->qplib_mr.va = (u64)(unsigned long)fence->va; + mr->qplib_mr.total_size = BNXT_RE_FENCE_BYTES; + pbl_tbl = dma_addr; + rc = bnxt_qplib_reg_mr(&rdev->qplib_res, &mr->qplib_mr, &pbl_tbl, + BNXT_RE_FENCE_PBL_SIZE, false); + if (rc) { + dev_err(rdev_to_dev(rdev), "Failed to register fence-MR\n"); + goto fail; + } + mr->ib_mr.rkey = mr->qplib_mr.rkey; + + /* Create a fence MW only for kernel consumers */ + mw = bnxt_re_alloc_mw(&pd->ib_pd, IB_MW_TYPE_1, NULL); + if (!mw) { + dev_err(rdev_to_dev(rdev), + "Failed to create fence-MW for PD: %p\n", pd); + rc = -EINVAL; + goto fail; + } + fence->mw = mw; + + bnxt_re_create_fence_wqe(pd); + return 0; + +fail: + bnxt_re_destroy_fence_mr(pd); + return rc; +} + /* Protection Domains */ int bnxt_re_dealloc_pd(struct ib_pd *ib_pd) { @@ -417,6 +611,7 @@ int bnxt_re_dealloc_pd(struct ib_pd *ib_pd) struct bnxt_re_dev *rdev = pd->rdev; int rc; + bnxt_re_destroy_fence_mr(pd); if (ib_pd->uobject && pd->dpi.dbr) { struct ib_ucontext *ib_uctx = ib_pd->uobject->context; struct bnxt_re_ucontext *ucntx; @@ -498,6 +693,10 @@ struct ib_pd *bnxt_re_alloc_pd(struct ib_device *ibdev, } } + if (!udata) + if (bnxt_re_create_fence_mr(pd)) + dev_warn(rdev_to_dev(rdev), + "Failed to create Fence-MR\n"); return &pd->ib_pd; dbfail: (void)bnxt_qplib_dealloc_pd(&rdev->qplib_res, &rdev->qplib_res.pd_tbl, @@ -849,12 +1048,16 @@ static struct bnxt_re_qp *bnxt_re_create_shadow_qp /* Shadow QP SQ depth should be same as QP1 RQ depth */ qp->qplib_qp.sq.max_wqe = qp1_qp->rq.max_wqe; qp->qplib_qp.sq.max_sge = 2; + /* Q full delta can be 1 since it is internal QP */ + qp->qplib_qp.sq.q_full_delta = 1; qp->qplib_qp.scq = qp1_qp->scq; qp->qplib_qp.rcq = qp1_qp->rcq; qp->qplib_qp.rq.max_wqe = qp1_qp->rq.max_wqe; qp->qplib_qp.rq.max_sge = qp1_qp->rq.max_sge; + /* Q full delta can be 1 since it is internal QP */ + qp->qplib_qp.rq.q_full_delta = 1; qp->qplib_qp.mtu = qp1_qp->mtu; @@ -917,10 +1120,6 @@ struct ib_qp *bnxt_re_create_qp(struct ib_pd *ib_pd, qp->qplib_qp.sig_type = ((qp_init_attr->sq_sig_type == IB_SIGNAL_ALL_WR) ? true : false); - entries = roundup_pow_of_two(qp_init_attr->cap.max_send_wr + 1); - qp->qplib_qp.sq.max_wqe = min_t(u32, entries, - dev_attr->max_qp_wqes + 1); - qp->qplib_qp.sq.max_sge = qp_init_attr->cap.max_send_sge; if (qp->qplib_qp.sq.max_sge > dev_attr->max_qp_sges) qp->qplib_qp.sq.max_sge = dev_attr->max_qp_sges; @@ -959,6 +1158,9 @@ struct ib_qp *bnxt_re_create_qp(struct ib_pd *ib_pd, qp->qplib_qp.rq.max_wqe = min_t(u32, entries, dev_attr->max_qp_wqes + 1); + qp->qplib_qp.rq.q_full_delta = qp->qplib_qp.rq.max_wqe - + qp_init_attr->cap.max_recv_wr; + qp->qplib_qp.rq.max_sge = qp_init_attr->cap.max_recv_sge; if (qp->qplib_qp.rq.max_sge > dev_attr->max_qp_sges) qp->qplib_qp.rq.max_sge = dev_attr->max_qp_sges; @@ -967,6 +1169,12 @@ struct ib_qp *bnxt_re_create_qp(struct ib_pd *ib_pd, qp->qplib_qp.mtu = ib_mtu_enum_to_int(iboe_get_mtu(rdev->netdev->mtu)); if (qp_init_attr->qp_type == IB_QPT_GSI) { + /* Allocate 1 more than what's provided */ + entries = roundup_pow_of_two(qp_init_attr->cap.max_send_wr + 1); + qp->qplib_qp.sq.max_wqe = min_t(u32, entries, + dev_attr->max_qp_wqes + 1); + qp->qplib_qp.sq.q_full_delta = qp->qplib_qp.sq.max_wqe - + qp_init_attr->cap.max_send_wr; qp->qplib_qp.rq.max_sge = dev_attr->max_qp_sges; if (qp->qplib_qp.rq.max_sge > dev_attr->max_qp_sges) qp->qplib_qp.rq.max_sge = dev_attr->max_qp_sges; @@ -1006,6 +1214,22 @@ struct ib_qp *bnxt_re_create_qp(struct ib_pd *ib_pd, } } else { + /* Allocate 128 + 1 more than what's provided */ + entries = roundup_pow_of_two(qp_init_attr->cap.max_send_wr + + BNXT_QPLIB_RESERVED_QP_WRS + 1); + qp->qplib_qp.sq.max_wqe = min_t(u32, entries, + dev_attr->max_qp_wqes + + BNXT_QPLIB_RESERVED_QP_WRS + 1); + qp->qplib_qp.sq.q_full_delta = BNXT_QPLIB_RESERVED_QP_WRS + 1; + + /* + * Reserving one slot for Phantom WQE. Application can + * post one extra entry in this case. But allowing this to avoid + * unexpected Queue full condition + */ + + qp->qplib_qp.sq.q_full_delta -= 1; + qp->qplib_qp.max_rd_atomic = dev_attr->max_qp_rd_atom; qp->qplib_qp.max_dest_rd_atomic = dev_attr->max_qp_init_rd_atom; if (udata) { @@ -1129,48 +1353,6 @@ static enum ib_mtu __to_ib_mtu(u32 mtu) } } -static int __from_ib_access_flags(int iflags) -{ - int qflags = 0; - - if (iflags & IB_ACCESS_LOCAL_WRITE) - qflags |= BNXT_QPLIB_ACCESS_LOCAL_WRITE; - if (iflags & IB_ACCESS_REMOTE_READ) - qflags |= BNXT_QPLIB_ACCESS_REMOTE_READ; - if (iflags & IB_ACCESS_REMOTE_WRITE) - qflags |= BNXT_QPLIB_ACCESS_REMOTE_WRITE; - if (iflags & IB_ACCESS_REMOTE_ATOMIC) - qflags |= BNXT_QPLIB_ACCESS_REMOTE_ATOMIC; - if (iflags & IB_ACCESS_MW_BIND) - qflags |= BNXT_QPLIB_ACCESS_MW_BIND; - if (iflags & IB_ZERO_BASED) - qflags |= BNXT_QPLIB_ACCESS_ZERO_BASED; - if (iflags & IB_ACCESS_ON_DEMAND) - qflags |= BNXT_QPLIB_ACCESS_ON_DEMAND; - return qflags; -}; - -static enum ib_access_flags __to_ib_access_flags(int qflags) -{ - enum ib_access_flags iflags = 0; - - if (qflags & BNXT_QPLIB_ACCESS_LOCAL_WRITE) - iflags |= IB_ACCESS_LOCAL_WRITE; - if (qflags & BNXT_QPLIB_ACCESS_REMOTE_WRITE) - iflags |= IB_ACCESS_REMOTE_WRITE; - if (qflags & BNXT_QPLIB_ACCESS_REMOTE_READ) - iflags |= IB_ACCESS_REMOTE_READ; - if (qflags & BNXT_QPLIB_ACCESS_REMOTE_ATOMIC) - iflags |= IB_ACCESS_REMOTE_ATOMIC; - if (qflags & BNXT_QPLIB_ACCESS_MW_BIND) - iflags |= IB_ACCESS_MW_BIND; - if (qflags & BNXT_QPLIB_ACCESS_ZERO_BASED) - iflags |= IB_ZERO_BASED; - if (qflags & BNXT_QPLIB_ACCESS_ON_DEMAND) - iflags |= IB_ACCESS_ON_DEMAND; - return iflags; -}; - static int bnxt_re_modify_shadow_qp(struct bnxt_re_dev *rdev, struct bnxt_re_qp *qp1_qp, int qp_attr_mask) @@ -1378,11 +1560,21 @@ int bnxt_re_modify_qp(struct ib_qp *ib_qp, struct ib_qp_attr *qp_attr, entries = roundup_pow_of_two(qp_attr->cap.max_send_wr); qp->qplib_qp.sq.max_wqe = min_t(u32, entries, dev_attr->max_qp_wqes + 1); + qp->qplib_qp.sq.q_full_delta = qp->qplib_qp.sq.max_wqe - + qp_attr->cap.max_send_wr; + /* + * Reserving one slot for Phantom WQE. Some application can + * post one extra entry in this case. Allowing this to avoid + * unexpected Queue full condition + */ + qp->qplib_qp.sq.q_full_delta -= 1; qp->qplib_qp.sq.max_sge = qp_attr->cap.max_send_sge; if (qp->qplib_qp.rq.max_wqe) { entries = roundup_pow_of_two(qp_attr->cap.max_recv_wr); qp->qplib_qp.rq.max_wqe = min_t(u32, entries, dev_attr->max_qp_wqes + 1); + qp->qplib_qp.rq.q_full_delta = qp->qplib_qp.rq.max_wqe - + qp_attr->cap.max_recv_wr; qp->qplib_qp.rq.max_sge = qp_attr->cap.max_recv_sge; } else { /* SRQ was used prior, just ignore the RQ caps */ @@ -2643,12 +2835,36 @@ static void bnxt_re_process_res_ud_wc(struct ib_wc *wc, wc->opcode = IB_WC_RECV_RDMA_WITH_IMM; } +static int send_phantom_wqe(struct bnxt_re_qp *qp) +{ + struct bnxt_qplib_qp *lib_qp = &qp->qplib_qp; + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&qp->sq_lock, flags); + + rc = bnxt_re_bind_fence_mw(lib_qp); + if (!rc) { + lib_qp->sq.phantom_wqe_cnt++; + dev_dbg(&lib_qp->sq.hwq.pdev->dev, + "qp %#x sq->prod %#x sw_prod %#x phantom_wqe_cnt %d\n", + lib_qp->id, lib_qp->sq.hwq.prod, + HWQ_CMP(lib_qp->sq.hwq.prod, &lib_qp->sq.hwq), + lib_qp->sq.phantom_wqe_cnt); + } + + spin_unlock_irqrestore(&qp->sq_lock, flags); + return rc; +} + int bnxt_re_poll_cq(struct ib_cq *ib_cq, int num_entries, struct ib_wc *wc) { struct bnxt_re_cq *cq = container_of(ib_cq, struct bnxt_re_cq, ib_cq); struct bnxt_re_qp *qp; struct bnxt_qplib_cqe *cqe; int i, ncqe, budget; + struct bnxt_qplib_q *sq; + struct bnxt_qplib_qp *lib_qp; u32 tbl_idx; struct bnxt_re_sqp_entries *sqp_entry = NULL; unsigned long flags; @@ -2661,7 +2877,21 @@ int bnxt_re_poll_cq(struct ib_cq *ib_cq, int num_entries, struct ib_wc *wc) } cqe = &cq->cql[0]; while (budget) { - ncqe = bnxt_qplib_poll_cq(&cq->qplib_cq, cqe, budget); + lib_qp = NULL; + ncqe = bnxt_qplib_poll_cq(&cq->qplib_cq, cqe, budget, &lib_qp); + if (lib_qp) { + sq = &lib_qp->sq; + if (sq->send_phantom) { + qp = container_of(lib_qp, + struct bnxt_re_qp, qplib_qp); + if (send_phantom_wqe(qp) == -ENOMEM) + dev_err(rdev_to_dev(cq->rdev), + "Phantom failed! Scheduled to send again\n"); + else + sq->send_phantom = false; + } + } + if (!ncqe) break; @@ -2914,6 +3144,55 @@ fail: return ERR_PTR(rc); } +struct ib_mw *bnxt_re_alloc_mw(struct ib_pd *ib_pd, enum ib_mw_type type, + struct ib_udata *udata) +{ + struct bnxt_re_pd *pd = container_of(ib_pd, struct bnxt_re_pd, ib_pd); + struct bnxt_re_dev *rdev = pd->rdev; + struct bnxt_re_mw *mw; + int rc; + + mw = kzalloc(sizeof(*mw), GFP_KERNEL); + if (!mw) + return ERR_PTR(-ENOMEM); + mw->rdev = rdev; + mw->qplib_mw.pd = &pd->qplib_pd; + + mw->qplib_mw.type = (type == IB_MW_TYPE_1 ? + CMDQ_ALLOCATE_MRW_MRW_FLAGS_MW_TYPE1 : + CMDQ_ALLOCATE_MRW_MRW_FLAGS_MW_TYPE2B); + rc = bnxt_qplib_alloc_mrw(&rdev->qplib_res, &mw->qplib_mw); + if (rc) { + dev_err(rdev_to_dev(rdev), "Allocate MW failed!"); + goto fail; + } + mw->ib_mw.rkey = mw->qplib_mw.rkey; + + atomic_inc(&rdev->mw_count); + return &mw->ib_mw; + +fail: + kfree(mw); + return ERR_PTR(rc); +} + +int bnxt_re_dealloc_mw(struct ib_mw *ib_mw) +{ + struct bnxt_re_mw *mw = container_of(ib_mw, struct bnxt_re_mw, ib_mw); + struct bnxt_re_dev *rdev = mw->rdev; + int rc; + + rc = bnxt_qplib_free_mrw(&rdev->qplib_res, &mw->qplib_mw); + if (rc) { + dev_err(rdev_to_dev(rdev), "Free MW failed: %#x\n", rc); + return rc; + } + + kfree(mw); + atomic_dec(&rdev->mw_count); + return rc; +} + /* Fast Memory Regions */ struct ib_fmr *bnxt_re_alloc_fmr(struct ib_pd *ib_pd, int mr_access_flags, struct ib_fmr_attr *fmr_attr) diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.h b/drivers/infiniband/hw/bnxt_re/ib_verbs.h index 5c3d71765454..25a4c8f4d939 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.h +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.h @@ -44,11 +44,23 @@ struct bnxt_re_gid_ctx { u32 refcnt; }; +#define BNXT_RE_FENCE_BYTES 64 +struct bnxt_re_fence_data { + u32 size; + u8 va[BNXT_RE_FENCE_BYTES]; + dma_addr_t dma_addr; + struct bnxt_re_mr *mr; + struct ib_mw *mw; + struct bnxt_qplib_swqe bind_wqe; + u32 bind_rkey; +}; + struct bnxt_re_pd { struct bnxt_re_dev *rdev; struct ib_pd ib_pd; struct bnxt_qplib_pd qplib_pd; struct bnxt_qplib_dpi dpi; + struct bnxt_re_fence_data fence; }; struct bnxt_re_ah { @@ -181,6 +193,9 @@ int bnxt_re_map_mr_sg(struct ib_mr *ib_mr, struct scatterlist *sg, int sg_nents, struct ib_mr *bnxt_re_alloc_mr(struct ib_pd *ib_pd, enum ib_mr_type mr_type, u32 max_num_sg); int bnxt_re_dereg_mr(struct ib_mr *mr); +struct ib_mw *bnxt_re_alloc_mw(struct ib_pd *ib_pd, enum ib_mw_type type, + struct ib_udata *udata); +int bnxt_re_dealloc_mw(struct ib_mw *mw); struct ib_fmr *bnxt_re_alloc_fmr(struct ib_pd *pd, int mr_access_flags, struct ib_fmr_attr *fmr_attr); int bnxt_re_map_phys_fmr(struct ib_fmr *fmr, u64 *page_list, int list_len, diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c index ea9ce4ff8999..31593fdf6365 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c @@ -1083,8 +1083,12 @@ int bnxt_qplib_post_send(struct bnxt_qplib_qp *qp, rc = -EINVAL; goto done; } - if (HWQ_CMP((sq->hwq.prod + 1), &sq->hwq) == - HWQ_CMP(sq->hwq.cons, &sq->hwq)) { + + if (bnxt_qplib_queue_full(sq)) { + dev_err(&sq->hwq.pdev->dev, + "QPLIB: prod = %#x cons = %#x qdepth = %#x delta = %#x", + sq->hwq.prod, sq->hwq.cons, sq->hwq.max_elements, + sq->q_full_delta); rc = -ENOMEM; goto done; } @@ -1332,8 +1336,7 @@ int bnxt_qplib_post_recv(struct bnxt_qplib_qp *qp, rc = -EINVAL; goto done; } - if (HWQ_CMP((rq->hwq.prod + 1), &rq->hwq) == - HWQ_CMP(rq->hwq.cons, &rq->hwq)) { + if (bnxt_qplib_queue_full(rq)) { dev_err(&rq->hwq.pdev->dev, "QPLIB: FP: QP (0x%x) RQ is full!", qp->id); rc = -EINVAL; @@ -1551,14 +1554,113 @@ static int __flush_rq(struct bnxt_qplib_q *rq, struct bnxt_qplib_qp *qp, return rc; } +/* Note: SQE is valid from sw_sq_cons up to cqe_sq_cons (exclusive) + * CQE is track from sw_cq_cons to max_element but valid only if VALID=1 + */ +static int do_wa9060(struct bnxt_qplib_qp *qp, struct bnxt_qplib_cq *cq, + u32 cq_cons, u32 sw_sq_cons, u32 cqe_sq_cons) +{ + struct bnxt_qplib_q *sq = &qp->sq; + struct bnxt_qplib_swq *swq; + u32 peek_sw_cq_cons, peek_raw_cq_cons, peek_sq_cons_idx; + struct cq_base *peek_hwcqe, **peek_hw_cqe_ptr; + struct cq_req *peek_req_hwcqe; + struct bnxt_qplib_qp *peek_qp; + struct bnxt_qplib_q *peek_sq; + int i, rc = 0; + + /* Normal mode */ + /* Check for the psn_search marking before completing */ + swq = &sq->swq[sw_sq_cons]; + if (swq->psn_search && + le32_to_cpu(swq->psn_search->flags_next_psn) & 0x80000000) { + /* Unmark */ + swq->psn_search->flags_next_psn = cpu_to_le32 + (le32_to_cpu(swq->psn_search->flags_next_psn) + & ~0x80000000); + dev_dbg(&cq->hwq.pdev->dev, + "FP: Process Req cq_cons=0x%x qp=0x%x sq cons sw=0x%x cqe=0x%x marked!\n", + cq_cons, qp->id, sw_sq_cons, cqe_sq_cons); + sq->condition = true; + sq->send_phantom = true; + + /* TODO: Only ARM if the previous SQE is ARMALL */ + bnxt_qplib_arm_cq(cq, DBR_DBR_TYPE_CQ_ARMALL); + + rc = -EAGAIN; + goto out; + } + if (sq->condition) { + /* Peek at the completions */ + peek_raw_cq_cons = cq->hwq.cons; + peek_sw_cq_cons = cq_cons; + i = cq->hwq.max_elements; + while (i--) { + peek_sw_cq_cons = HWQ_CMP((peek_sw_cq_cons), &cq->hwq); + peek_hw_cqe_ptr = (struct cq_base **)cq->hwq.pbl_ptr; + peek_hwcqe = &peek_hw_cqe_ptr[CQE_PG(peek_sw_cq_cons)] + [CQE_IDX(peek_sw_cq_cons)]; + /* If the next hwcqe is VALID */ + if (CQE_CMP_VALID(peek_hwcqe, peek_raw_cq_cons, + cq->hwq.max_elements)) { + /* If the next hwcqe is a REQ */ + if ((peek_hwcqe->cqe_type_toggle & + CQ_BASE_CQE_TYPE_MASK) == + CQ_BASE_CQE_TYPE_REQ) { + peek_req_hwcqe = (struct cq_req *) + peek_hwcqe; + peek_qp = (struct bnxt_qplib_qp *) + ((unsigned long) + le64_to_cpu + (peek_req_hwcqe->qp_handle)); + peek_sq = &peek_qp->sq; + peek_sq_cons_idx = HWQ_CMP(le16_to_cpu( + peek_req_hwcqe->sq_cons_idx) - 1 + , &sq->hwq); + /* If the hwcqe's sq's wr_id matches */ + if (peek_sq == sq && + sq->swq[peek_sq_cons_idx].wr_id == + BNXT_QPLIB_FENCE_WRID) { + /* + * Unbreak only if the phantom + * comes back + */ + dev_dbg(&cq->hwq.pdev->dev, + "FP:Got Phantom CQE"); + sq->condition = false; + sq->single = true; + rc = 0; + goto out; + } + } + /* Valid but not the phantom, so keep looping */ + } else { + /* Not valid yet, just exit and wait */ + rc = -EINVAL; + goto out; + } + peek_sw_cq_cons++; + peek_raw_cq_cons++; + } + dev_err(&cq->hwq.pdev->dev, + "Should not have come here! cq_cons=0x%x qp=0x%x sq cons sw=0x%x hw=0x%x", + cq_cons, qp->id, sw_sq_cons, cqe_sq_cons); + rc = -EINVAL; + } +out: + return rc; +} + static int bnxt_qplib_cq_process_req(struct bnxt_qplib_cq *cq, struct cq_req *hwcqe, - struct bnxt_qplib_cqe **pcqe, int *budget) + struct bnxt_qplib_cqe **pcqe, int *budget, + u32 cq_cons, struct bnxt_qplib_qp **lib_qp) { struct bnxt_qplib_qp *qp; struct bnxt_qplib_q *sq; struct bnxt_qplib_cqe *cqe; - u32 sw_cons, cqe_cons; + u32 sw_sq_cons, cqe_sq_cons; + struct bnxt_qplib_swq *swq; int rc = 0; qp = (struct bnxt_qplib_qp *)((unsigned long) @@ -1570,13 +1672,13 @@ static int bnxt_qplib_cq_process_req(struct bnxt_qplib_cq *cq, } sq = &qp->sq; - cqe_cons = HWQ_CMP(le16_to_cpu(hwcqe->sq_cons_idx), &sq->hwq); - if (cqe_cons > sq->hwq.max_elements) { + cqe_sq_cons = HWQ_CMP(le16_to_cpu(hwcqe->sq_cons_idx), &sq->hwq); + if (cqe_sq_cons > sq->hwq.max_elements) { dev_err(&cq->hwq.pdev->dev, "QPLIB: FP: CQ Process req reported "); dev_err(&cq->hwq.pdev->dev, "QPLIB: sq_cons_idx 0x%x which exceeded max 0x%x", - cqe_cons, sq->hwq.max_elements); + cqe_sq_cons, sq->hwq.max_elements); return -EINVAL; } /* If we were in the middle of flushing the SQ, continue */ @@ -1585,53 +1687,74 @@ static int bnxt_qplib_cq_process_req(struct bnxt_qplib_cq *cq, /* Require to walk the sq's swq to fabricate CQEs for all previously * signaled SWQEs due to CQE aggregation from the current sq cons - * to the cqe_cons + * to the cqe_sq_cons */ cqe = *pcqe; while (*budget) { - sw_cons = HWQ_CMP(sq->hwq.cons, &sq->hwq); - if (sw_cons == cqe_cons) + sw_sq_cons = HWQ_CMP(sq->hwq.cons, &sq->hwq); + if (sw_sq_cons == cqe_sq_cons) + /* Done */ break; + + swq = &sq->swq[sw_sq_cons]; memset(cqe, 0, sizeof(*cqe)); cqe->opcode = CQ_BASE_CQE_TYPE_REQ; cqe->qp_handle = (u64)(unsigned long)qp; cqe->src_qp = qp->id; - cqe->wr_id = sq->swq[sw_cons].wr_id; - cqe->type = sq->swq[sw_cons].type; + cqe->wr_id = swq->wr_id; + if (cqe->wr_id == BNXT_QPLIB_FENCE_WRID) + goto skip; + cqe->type = swq->type; /* For the last CQE, check for status. For errors, regardless * of the request being signaled or not, it must complete with * the hwcqe error status */ - if (HWQ_CMP((sw_cons + 1), &sq->hwq) == cqe_cons && + if (HWQ_CMP((sw_sq_cons + 1), &sq->hwq) == cqe_sq_cons && hwcqe->status != CQ_REQ_STATUS_OK) { cqe->status = hwcqe->status; dev_err(&cq->hwq.pdev->dev, "QPLIB: FP: CQ Processed Req "); dev_err(&cq->hwq.pdev->dev, "QPLIB: wr_id[%d] = 0x%llx with status 0x%x", - sw_cons, cqe->wr_id, cqe->status); + sw_sq_cons, cqe->wr_id, cqe->status); cqe++; (*budget)--; sq->flush_in_progress = true; /* Must block new posting of SQ and RQ */ qp->state = CMDQ_MODIFY_QP_NEW_STATE_ERR; + sq->condition = false; + sq->single = false; } else { - if (sq->swq[sw_cons].flags & - SQ_SEND_FLAGS_SIGNAL_COMP) { + if (swq->flags & SQ_SEND_FLAGS_SIGNAL_COMP) { + /* Before we complete, do WA 9060 */ + if (do_wa9060(qp, cq, cq_cons, sw_sq_cons, + cqe_sq_cons)) { + *lib_qp = qp; + goto out; + } cqe->status = CQ_REQ_STATUS_OK; cqe++; (*budget)--; } } +skip: sq->hwq.cons++; + if (sq->single) + break; } +out: *pcqe = cqe; - if (!*budget && HWQ_CMP(sq->hwq.cons, &sq->hwq) != cqe_cons) { + if (HWQ_CMP(sq->hwq.cons, &sq->hwq) != cqe_sq_cons) { /* Out of budget */ rc = -EAGAIN; goto done; } + /* + * Back to normal completion mode only after it has completed all of + * the WC for this CQE + */ + sq->single = false; if (!sq->flush_in_progress) goto done; flush: @@ -1961,7 +2084,7 @@ static int bnxt_qplib_cq_process_cutoff(struct bnxt_qplib_cq *cq, } int bnxt_qplib_poll_cq(struct bnxt_qplib_cq *cq, struct bnxt_qplib_cqe *cqe, - int num_cqes) + int num_cqes, struct bnxt_qplib_qp **lib_qp) { struct cq_base *hw_cqe, **hw_cqe_ptr; unsigned long flags; @@ -1986,7 +2109,8 @@ int bnxt_qplib_poll_cq(struct bnxt_qplib_cq *cq, struct bnxt_qplib_cqe *cqe, case CQ_BASE_CQE_TYPE_REQ: rc = bnxt_qplib_cq_process_req(cq, (struct cq_req *)hw_cqe, - &cqe, &budget); + &cqe, &budget, + sw_cons, lib_qp); break; case CQ_BASE_CQE_TYPE_RES_RC: rc = bnxt_qplib_cq_process_res_rc(cq, diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.h b/drivers/infiniband/hw/bnxt_re/qplib_fp.h index f0150f8da1e3..71539ea7f421 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_fp.h +++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.h @@ -88,6 +88,7 @@ struct bnxt_qplib_swq { struct bnxt_qplib_swqe { /* General */ +#define BNXT_QPLIB_FENCE_WRID 0x46454E43 /* "FENC" */ u64 wr_id; u8 reqs_type; u8 type; @@ -216,9 +217,16 @@ struct bnxt_qplib_q { struct scatterlist *sglist; u32 nmap; u32 max_wqe; + u16 q_full_delta; u16 max_sge; u32 psn; bool flush_in_progress; + bool condition; + bool single; + bool send_phantom; + u32 phantom_wqe_cnt; + u32 phantom_cqe_cnt; + u32 next_cq_cons; }; struct bnxt_qplib_qp { @@ -301,6 +309,13 @@ struct bnxt_qplib_qp { (!!((hdr)->cqe_type_toggle & CQ_BASE_TOGGLE) == \ !((raw_cons) & (cp_bit))) +static inline bool bnxt_qplib_queue_full(struct bnxt_qplib_q *qplib_q) +{ + return HWQ_CMP((qplib_q->hwq.prod + qplib_q->q_full_delta), + &qplib_q->hwq) == HWQ_CMP(qplib_q->hwq.cons, + &qplib_q->hwq); +} + struct bnxt_qplib_cqe { u8 status; u8 type; @@ -432,7 +447,7 @@ int bnxt_qplib_post_recv(struct bnxt_qplib_qp *qp, int bnxt_qplib_create_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq); int bnxt_qplib_destroy_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq); int bnxt_qplib_poll_cq(struct bnxt_qplib_cq *cq, struct bnxt_qplib_cqe *cqe, - int num); + int num, struct bnxt_qplib_qp **qp); void bnxt_qplib_req_notify_cq(struct bnxt_qplib_cq *cq, u32 arm_type); void bnxt_qplib_free_nq(struct bnxt_qplib_nq *nq); int bnxt_qplib_alloc_nq(struct pci_dev *pdev, struct bnxt_qplib_nq *nq); diff --git a/drivers/infiniband/hw/bnxt_re/qplib_res.h b/drivers/infiniband/hw/bnxt_re/qplib_res.h index 4103e602b058..2e4855509719 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_res.h +++ b/drivers/infiniband/hw/bnxt_re/qplib_res.h @@ -52,7 +52,6 @@ extern const struct bnxt_qplib_gid bnxt_qplib_gid_zero; ((HWQ_CMP(hwq->prod, hwq)\ - HWQ_CMP(hwq->cons, hwq))\ & (hwq->max_elements - 1))) - enum bnxt_qplib_hwq_type { HWQ_TYPE_CTX, HWQ_TYPE_QUEUE, diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.c b/drivers/infiniband/hw/bnxt_re/qplib_sp.c index cf7c9cb185d5..fde18cf0e406 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_sp.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.c @@ -88,6 +88,11 @@ int bnxt_qplib_get_dev_attr(struct bnxt_qplib_rcfw *rcfw, sb->max_qp_init_rd_atom > BNXT_QPLIB_MAX_OUT_RD_ATOM ? BNXT_QPLIB_MAX_OUT_RD_ATOM : sb->max_qp_init_rd_atom; attr->max_qp_wqes = le16_to_cpu(sb->max_qp_wr); + /* + * 128 WQEs needs to be reserved for the HW (8916). Prevent + * reporting the max number + */ + attr->max_qp_wqes -= BNXT_QPLIB_RESERVED_QP_WRS; attr->max_qp_sges = sb->max_sge; attr->max_cq = le32_to_cpu(sb->max_cq); attr->max_cq_wqes = le32_to_cpu(sb->max_cqe); diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.h b/drivers/infiniband/hw/bnxt_re/qplib_sp.h index 1442a617e968..a543f959098b 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_sp.h +++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.h @@ -40,6 +40,8 @@ #ifndef __BNXT_QPLIB_SP_H__ #define __BNXT_QPLIB_SP_H__ +#define BNXT_QPLIB_RESERVED_QP_WRS 128 + struct bnxt_qplib_dev_attr { char fw_ver[32]; u16 max_sgid; From 1c980b010f06696c9093c5d6a5ac7b5145f89a04 Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Mon, 22 May 2017 03:15:34 -0700 Subject: [PATCH 0801/1065] RDMA/bnxt_re: Dereg MR in FW before freeing the fast_reg_page_list If the host buffers are freed before destroying MR in HW, HW could try accessing these buffers. This could cause a host crash. Fixing the code to avoid this condition. Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/bnxt_re/ib_verbs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index 169798752895..d94b1b304135 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -3052,6 +3052,12 @@ int bnxt_re_dereg_mr(struct ib_mr *ib_mr) struct bnxt_re_dev *rdev = mr->rdev; int rc; + rc = bnxt_qplib_free_mrw(&rdev->qplib_res, &mr->qplib_mr); + if (rc) { + dev_err(rdev_to_dev(rdev), "Dereg MR failed: %#x\n", rc); + return rc; + } + if (mr->npages && mr->pages) { rc = bnxt_qplib_free_fast_reg_page_list(&rdev->qplib_res, &mr->qplib_frpl); @@ -3059,8 +3065,6 @@ int bnxt_re_dereg_mr(struct ib_mr *ib_mr) mr->npages = 0; mr->pages = NULL; } - rc = bnxt_qplib_free_mrw(&rdev->qplib_res, &mr->qplib_mr); - if (!IS_ERR_OR_NULL(mr->ib_umem)) ib_umem_release(mr->ib_umem); From 3fb755b3d58084001c89e5f0fd558552bdef9051 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Mon, 22 May 2017 03:15:36 -0700 Subject: [PATCH 0802/1065] RDMA/bnxt_re: Add HW workaround for avoiding stall for UD QPs HW stalls out after 0x800000 WQEs are posted for UD QPs. To workaround this problem, driver will send a modify_qp cmd to the HW at around the halfway mark(0x400000) so that FW can accordingly modify the QP context in the HW to prevent this stall. This workaround needs to be done for UD, QP1 and Raw Ethertype packets. Added a counter to keep track of WQEs posted during post_send. Signed-off-by: Somnath Kotur Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/bnxt_re/bnxt_re.h | 2 ++ drivers/infiniband/hw/bnxt_re/ib_verbs.c | 18 ++++++++++++++++++ drivers/infiniband/hw/bnxt_re/qplib_fp.c | 3 +++ drivers/infiniband/hw/bnxt_re/qplib_fp.h | 1 + 4 files changed, 24 insertions(+) diff --git a/drivers/infiniband/hw/bnxt_re/bnxt_re.h b/drivers/infiniband/hw/bnxt_re/bnxt_re.h index ebf7be8d4139..d5e457ee7e7b 100644 --- a/drivers/infiniband/hw/bnxt_re/bnxt_re.h +++ b/drivers/infiniband/hw/bnxt_re/bnxt_re.h @@ -56,6 +56,8 @@ #define BNXT_RE_MAX_SRQC_COUNT (64 * 1024) #define BNXT_RE_MAX_CQ_COUNT (64 * 1024) +#define BNXT_RE_UD_QP_HW_STALL 0x400000 + struct bnxt_re_work { struct work_struct work; unsigned long event; diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index d94b1b304135..08e7e59df28c 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -2075,6 +2075,22 @@ static int bnxt_re_copy_wr_payload(struct bnxt_re_dev *rdev, return payload_sz; } +static void bnxt_ud_qp_hw_stall_workaround(struct bnxt_re_qp *qp) +{ + if ((qp->ib_qp.qp_type == IB_QPT_UD || + qp->ib_qp.qp_type == IB_QPT_GSI || + qp->ib_qp.qp_type == IB_QPT_RAW_ETHERTYPE) && + qp->qplib_qp.wqe_cnt == BNXT_RE_UD_QP_HW_STALL) { + int qp_attr_mask; + struct ib_qp_attr qp_attr; + + qp_attr_mask = IB_QP_STATE; + qp_attr.qp_state = IB_QPS_RTS; + bnxt_re_modify_qp(&qp->ib_qp, &qp_attr, qp_attr_mask, NULL); + qp->qplib_qp.wqe_cnt = 0; + } +} + static int bnxt_re_post_send_shadow_qp(struct bnxt_re_dev *rdev, struct bnxt_re_qp *qp, struct ib_send_wr *wr) @@ -2120,6 +2136,7 @@ bad: wr = wr->next; } bnxt_qplib_post_send_db(&qp->qplib_qp); + bnxt_ud_qp_hw_stall_workaround(qp); spin_unlock_irqrestore(&qp->sq_lock, flags); return rc; } @@ -2216,6 +2233,7 @@ bad: wr = wr->next; } bnxt_qplib_post_send_db(&qp->qplib_qp); + bnxt_ud_qp_hw_stall_workaround(qp); spin_unlock_irqrestore(&qp->sq_lock, flags); return rc; diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c index 31593fdf6365..f05500bcdcf1 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c @@ -1298,6 +1298,9 @@ int bnxt_qplib_post_send(struct bnxt_qplib_qp *qp, } sq->hwq.prod++; + + qp->wqe_cnt++; + done: return rc; } diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.h b/drivers/infiniband/hw/bnxt_re/qplib_fp.h index 71539ea7f421..36b7b7db0e3f 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_fp.h +++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.h @@ -250,6 +250,7 @@ struct bnxt_qplib_qp { u8 timeout; u8 retry_cnt; u8 rnr_retry; + u64 wqe_cnt; u32 min_rnr_timer; u32 max_rd_atomic; u32 max_dest_rd_atomic; From 018cf5995d69d25be7330c3b8bef4c31bf2b273b Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Mon, 22 May 2017 03:15:40 -0700 Subject: [PATCH 0803/1065] RDMA/bnxt_re: Fix RQE posting logic This patch adds code to ring RQ Doorbell aggressively so that the adapter can DMA RQ buffers sooner, instead of DMA all WQEs in the post_recv WR list together at the end of the post_recv verb. Also use spinlock to serialize RQ posting Signed-off-by: Kalesh AP Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/bnxt_re/bnxt_re.h | 2 ++ drivers/infiniband/hw/bnxt_re/ib_verbs.c | 18 +++++++++++++++++- drivers/infiniband/hw/bnxt_re/ib_verbs.h | 1 + 3 files changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/bnxt_re/bnxt_re.h b/drivers/infiniband/hw/bnxt_re/bnxt_re.h index d5e457ee7e7b..08772836fded 100644 --- a/drivers/infiniband/hw/bnxt_re/bnxt_re.h +++ b/drivers/infiniband/hw/bnxt_re/bnxt_re.h @@ -58,6 +58,8 @@ #define BNXT_RE_UD_QP_HW_STALL 0x400000 +#define BNXT_RE_RQ_WQE_THRESHOLD 32 + struct bnxt_re_work { struct work_struct work; unsigned long event; diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index 08e7e59df28c..491932e70638 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -1249,6 +1249,7 @@ struct ib_qp *bnxt_re_create_qp(struct ib_pd *ib_pd, qp->ib_qp.qp_num = qp->qplib_qp.id; spin_lock_init(&qp->sq_lock); + spin_lock_init(&qp->rq_lock); if (udata) { struct bnxt_re_qp_resp resp; @@ -2281,7 +2282,10 @@ int bnxt_re_post_recv(struct ib_qp *ib_qp, struct ib_recv_wr *wr, struct bnxt_re_qp *qp = container_of(ib_qp, struct bnxt_re_qp, ib_qp); struct bnxt_qplib_swqe wqe; int rc = 0, payload_sz = 0; + unsigned long flags; + u32 count = 0; + spin_lock_irqsave(&qp->rq_lock, flags); while (wr) { /* House keeping */ memset(&wqe, 0, sizeof(wqe)); @@ -2310,9 +2314,21 @@ int bnxt_re_post_recv(struct ib_qp *ib_qp, struct ib_recv_wr *wr, *bad_wr = wr; break; } + + /* Ring DB if the RQEs posted reaches a threshold value */ + if (++count >= BNXT_RE_RQ_WQE_THRESHOLD) { + bnxt_qplib_post_recv_db(&qp->qplib_qp); + count = 0; + } + wr = wr->next; } - bnxt_qplib_post_recv_db(&qp->qplib_qp); + + if (count) + bnxt_qplib_post_recv_db(&qp->qplib_qp); + + spin_unlock_irqrestore(&qp->rq_lock, flags); + return rc; } diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.h b/drivers/infiniband/hw/bnxt_re/ib_verbs.h index 25a4c8f4d939..16f62dc456f6 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.h +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.h @@ -74,6 +74,7 @@ struct bnxt_re_qp { struct bnxt_re_dev *rdev; struct ib_qp ib_qp; spinlock_t sq_lock; /* protect sq */ + spinlock_t rq_lock; /* protect rq */ struct bnxt_qplib_qp qplib_qp; struct ib_umem *sumem; struct ib_umem *rumem; From 86816a00ca57caf7e4bf5d30e20eb683f5a3ae35 Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Mon, 22 May 2017 03:15:44 -0700 Subject: [PATCH 0804/1065] RDMA/bnxt_re: Remove FMR support Some issues observed with FMR implementation while running stress traffic. So removing the FMR verbs support for now. Signed-off-by: Selvin Xavier Acked-by: Christoph Hellwig Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/bnxt_re/ib_verbs.c | 98 +----------------------- drivers/infiniband/hw/bnxt_re/ib_verbs.h | 6 -- drivers/infiniband/hw/bnxt_re/main.c | 4 - 3 files changed, 2 insertions(+), 106 deletions(-) diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index 491932e70638..c7bd68311d0c 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -191,8 +191,8 @@ int bnxt_re_query_device(struct ib_device *ibdev, ib_attr->max_total_mcast_qp_attach = 0; ib_attr->max_ah = dev_attr->max_ah; - ib_attr->max_fmr = dev_attr->max_fmr; - ib_attr->max_map_per_fmr = 1; /* ? */ + ib_attr->max_fmr = 0; + ib_attr->max_map_per_fmr = 0; ib_attr->max_srq = dev_attr->max_srq; ib_attr->max_srq_wr = dev_attr->max_srq_wqes; @@ -3231,100 +3231,6 @@ int bnxt_re_dealloc_mw(struct ib_mw *ib_mw) return rc; } -/* Fast Memory Regions */ -struct ib_fmr *bnxt_re_alloc_fmr(struct ib_pd *ib_pd, int mr_access_flags, - struct ib_fmr_attr *fmr_attr) -{ - struct bnxt_re_pd *pd = container_of(ib_pd, struct bnxt_re_pd, ib_pd); - struct bnxt_re_dev *rdev = pd->rdev; - struct bnxt_re_fmr *fmr; - int rc; - - if (fmr_attr->max_pages > MAX_PBL_LVL_2_PGS || - fmr_attr->max_maps > rdev->dev_attr.max_map_per_fmr) { - dev_err(rdev_to_dev(rdev), "Allocate FMR exceeded Max limit"); - return ERR_PTR(-ENOMEM); - } - fmr = kzalloc(sizeof(*fmr), GFP_KERNEL); - if (!fmr) - return ERR_PTR(-ENOMEM); - - fmr->rdev = rdev; - fmr->qplib_fmr.pd = &pd->qplib_pd; - fmr->qplib_fmr.type = CMDQ_ALLOCATE_MRW_MRW_FLAGS_PMR; - - rc = bnxt_qplib_alloc_mrw(&rdev->qplib_res, &fmr->qplib_fmr); - if (rc) - goto fail; - - fmr->qplib_fmr.flags = __from_ib_access_flags(mr_access_flags); - fmr->ib_fmr.lkey = fmr->qplib_fmr.lkey; - fmr->ib_fmr.rkey = fmr->ib_fmr.lkey; - - atomic_inc(&rdev->mr_count); - return &fmr->ib_fmr; -fail: - kfree(fmr); - return ERR_PTR(rc); -} - -int bnxt_re_map_phys_fmr(struct ib_fmr *ib_fmr, u64 *page_list, int list_len, - u64 iova) -{ - struct bnxt_re_fmr *fmr = container_of(ib_fmr, struct bnxt_re_fmr, - ib_fmr); - struct bnxt_re_dev *rdev = fmr->rdev; - int rc; - - fmr->qplib_fmr.va = iova; - fmr->qplib_fmr.total_size = list_len * PAGE_SIZE; - - rc = bnxt_qplib_reg_mr(&rdev->qplib_res, &fmr->qplib_fmr, page_list, - list_len, true); - if (rc) - dev_err(rdev_to_dev(rdev), "Failed to map FMR for lkey = 0x%x!", - fmr->ib_fmr.lkey); - return rc; -} - -int bnxt_re_unmap_fmr(struct list_head *fmr_list) -{ - struct bnxt_re_dev *rdev; - struct bnxt_re_fmr *fmr; - struct ib_fmr *ib_fmr; - int rc = 0; - - /* Validate each FMRs inside the fmr_list */ - list_for_each_entry(ib_fmr, fmr_list, list) { - fmr = container_of(ib_fmr, struct bnxt_re_fmr, ib_fmr); - rdev = fmr->rdev; - - if (rdev) { - rc = bnxt_qplib_dereg_mrw(&rdev->qplib_res, - &fmr->qplib_fmr, true); - if (rc) - break; - } - } - return rc; -} - -int bnxt_re_dealloc_fmr(struct ib_fmr *ib_fmr) -{ - struct bnxt_re_fmr *fmr = container_of(ib_fmr, struct bnxt_re_fmr, - ib_fmr); - struct bnxt_re_dev *rdev = fmr->rdev; - int rc; - - rc = bnxt_qplib_free_mrw(&rdev->qplib_res, &fmr->qplib_fmr); - if (rc) - dev_err(rdev_to_dev(rdev), "Failed to free FMR"); - - kfree(fmr); - atomic_dec(&rdev->mr_count); - return rc; -} - /* uverbs */ struct ib_mr *bnxt_re_reg_user_mr(struct ib_pd *ib_pd, u64 start, u64 length, u64 virt_addr, int mr_access_flags, diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.h b/drivers/infiniband/hw/bnxt_re/ib_verbs.h index 16f62dc456f6..6c160f6a5398 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.h +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.h @@ -197,12 +197,6 @@ int bnxt_re_dereg_mr(struct ib_mr *mr); struct ib_mw *bnxt_re_alloc_mw(struct ib_pd *ib_pd, enum ib_mw_type type, struct ib_udata *udata); int bnxt_re_dealloc_mw(struct ib_mw *mw); -struct ib_fmr *bnxt_re_alloc_fmr(struct ib_pd *pd, int mr_access_flags, - struct ib_fmr_attr *fmr_attr); -int bnxt_re_map_phys_fmr(struct ib_fmr *fmr, u64 *page_list, int list_len, - u64 iova); -int bnxt_re_unmap_fmr(struct list_head *fmr_list); -int bnxt_re_dealloc_fmr(struct ib_fmr *fmr); struct ib_mr *bnxt_re_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, u64 virt_addr, int mr_access_flags, struct ib_udata *udata); diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c index 5d355401179b..1fce5e73216b 100644 --- a/drivers/infiniband/hw/bnxt_re/main.c +++ b/drivers/infiniband/hw/bnxt_re/main.c @@ -507,10 +507,6 @@ static int bnxt_re_register_ib(struct bnxt_re_dev *rdev) ibdev->dereg_mr = bnxt_re_dereg_mr; ibdev->alloc_mr = bnxt_re_alloc_mr; ibdev->map_mr_sg = bnxt_re_map_mr_sg; - ibdev->alloc_fmr = bnxt_re_alloc_fmr; - ibdev->map_phys_fmr = bnxt_re_map_phys_fmr; - ibdev->unmap_fmr = bnxt_re_unmap_fmr; - ibdev->dealloc_fmr = bnxt_re_dealloc_fmr; ibdev->reg_user_mr = bnxt_re_reg_user_mr; ibdev->alloc_ucontext = bnxt_re_alloc_ucontext; From dac2738607de3d2bb99bae91c9054a2d753af18b Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Mon, 5 Jun 2017 16:32:26 +0300 Subject: [PATCH 0805/1065] RDMA/qedr: Initialize byte_len in WC of READ and SEND commands Initialize byte_len in work completion of RDMA_READ and RDMA_SEND. Exposed by uDAPL application. Signed-off-by: Michal Kalderon Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qedr/verbs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 17685cfea6a2..7add0cd09412 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -3209,6 +3209,10 @@ static int process_req(struct qedr_dev *dev, struct qedr_qp *qp, case IB_WC_REG_MR: qp->wqe_wr_id[qp->sq.cons].mr->info.completed++; break; + case IB_WC_RDMA_READ: + case IB_WC_SEND: + wc->byte_len = qp->wqe_wr_id[qp->sq.cons].bytes_len; + break; default: break; } From e57bb6be5e095351086d3e6de9853a0763342535 Mon Sep 17 00:00:00 2001 From: Ram Amrani Date: Mon, 5 Jun 2017 16:32:27 +0300 Subject: [PATCH 0806/1065] RDMA/qedr: Add 64KB PAGE_SIZE support to user-space queues Add 64KB PAGE_SIZE support to user-space CQ, SQ and RQ queues. De-facto it means that code was added to translate 64KB pages to smaller 4KB pages that the FW can handle. Otherwise, the FW would wrap (or jump to the next page) when reaching 4KB while the user space library will continue on the same large page. Note that MR code remains as is since the FW supports larger pages for MRs. Signed-off-by: Ram Amrani Signed-off-by: Michal Kalderon Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qedr/qedr.h | 5 ++- drivers/infiniband/hw/qedr/verbs.c | 60 +++++++++++++++++------------- 2 files changed, 39 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/hw/qedr/qedr.h b/drivers/infiniband/hw/qedr/qedr.h index aa08c76a4245..d961f79b317c 100644 --- a/drivers/infiniband/hw/qedr/qedr.h +++ b/drivers/infiniband/hw/qedr/qedr.h @@ -58,7 +58,10 @@ #define QEDR_MSG_QP " QP" #define QEDR_MSG_GSI " GSI" -#define QEDR_CQ_MAGIC_NUMBER (0x11223344) +#define QEDR_CQ_MAGIC_NUMBER (0x11223344) + +#define FW_PAGE_SIZE (RDMA_RING_PAGE_SIZE) +#define FW_PAGE_SHIFT (12) struct qedr_dev; diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 7add0cd09412..d6723c365c7f 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -653,14 +653,15 @@ static int qedr_prepare_pbl_tbl(struct qedr_dev *dev, static void qedr_populate_pbls(struct qedr_dev *dev, struct ib_umem *umem, struct qedr_pbl *pbl, - struct qedr_pbl_info *pbl_info) + struct qedr_pbl_info *pbl_info, u32 pg_shift) { int shift, pg_cnt, pages, pbe_cnt, total_num_pbes = 0; + u32 fw_pg_cnt, fw_pg_per_umem_pg; struct qedr_pbl *pbl_tbl; struct scatterlist *sg; struct regpair *pbe; + u64 pg_addr; int entry; - u32 addr; if (!pbl_info->num_pbes) return; @@ -683,29 +684,35 @@ static void qedr_populate_pbls(struct qedr_dev *dev, struct ib_umem *umem, shift = umem->page_shift; + fw_pg_per_umem_pg = BIT(umem->page_shift - pg_shift); + for_each_sg(umem->sg_head.sgl, sg, umem->nmap, entry) { pages = sg_dma_len(sg) >> shift; + pg_addr = sg_dma_address(sg); for (pg_cnt = 0; pg_cnt < pages; pg_cnt++) { - /* store the page address in pbe */ - pbe->lo = cpu_to_le32(sg_dma_address(sg) + - (pg_cnt << shift)); - addr = upper_32_bits(sg_dma_address(sg) + - (pg_cnt << shift)); - pbe->hi = cpu_to_le32(addr); - pbe_cnt++; - total_num_pbes++; - pbe++; + for (fw_pg_cnt = 0; fw_pg_cnt < fw_pg_per_umem_pg;) { + pbe->lo = cpu_to_le32(pg_addr); + pbe->hi = cpu_to_le32(upper_32_bits(pg_addr)); - if (total_num_pbes == pbl_info->num_pbes) - return; + pg_addr += BIT(pg_shift); + pbe_cnt++; + total_num_pbes++; + pbe++; - /* If the given pbl is full storing the pbes, - * move to next pbl. - */ - if (pbe_cnt == (pbl_info->pbl_size / sizeof(u64))) { - pbl_tbl++; - pbe = (struct regpair *)pbl_tbl->va; - pbe_cnt = 0; + if (total_num_pbes == pbl_info->num_pbes) + return; + + /* If the given pbl is full storing the pbes, + * move to next pbl. + */ + if (pbe_cnt == + (pbl_info->pbl_size / sizeof(u64))) { + pbl_tbl++; + pbe = (struct regpair *)pbl_tbl->va; + pbe_cnt = 0; + } + + fw_pg_cnt++; } } } @@ -754,7 +761,7 @@ static inline int qedr_init_user_queue(struct ib_ucontext *ib_ctx, u64 buf_addr, size_t buf_len, int access, int dmasync) { - int page_cnt; + u32 fw_pages; int rc; q->buf_addr = buf_addr; @@ -766,8 +773,10 @@ static inline int qedr_init_user_queue(struct ib_ucontext *ib_ctx, return PTR_ERR(q->umem); } - page_cnt = ib_umem_page_count(q->umem); - rc = qedr_prepare_pbl_tbl(dev, &q->pbl_info, page_cnt, 0); + fw_pages = ib_umem_page_count(q->umem) << + (q->umem->page_shift - FW_PAGE_SHIFT); + + rc = qedr_prepare_pbl_tbl(dev, &q->pbl_info, fw_pages, 0); if (rc) goto err0; @@ -777,7 +786,8 @@ static inline int qedr_init_user_queue(struct ib_ucontext *ib_ctx, goto err0; } - qedr_populate_pbls(dev, q->umem, q->pbl_tbl, &q->pbl_info); + qedr_populate_pbls(dev, q->umem, q->pbl_tbl, &q->pbl_info, + FW_PAGE_SHIFT); return 0; @@ -2226,7 +2236,7 @@ struct ib_mr *qedr_reg_user_mr(struct ib_pd *ibpd, u64 start, u64 len, goto err1; qedr_populate_pbls(dev, mr->umem, mr->info.pbl_table, - &mr->info.pbl_info); + &mr->info.pbl_info, mr->umem->page_shift); rc = dev->ops->rdma_alloc_tid(dev->rdma_ctx, &mr->hw_mr.itid); if (rc) { From 07d432bb97f19dd5e784175152f9fce3b2646133 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 5 Jun 2017 20:23:40 +0800 Subject: [PATCH 0807/1065] rxe: Fix a sleep-in-atomic bug in post_one_send The driver may sleep under a spin lock, and the function call path is: post_one_send (acquire the lock by spin_lock_irqsave) init_send_wqe copy_from_user --> may sleep There is no flow that makes "qp->is_user" true, and copy_from_user may cause bug when a non-user pointer is used. So the lines of copy_from_user and check of "qp->is_user" are removed. Signed-off-by: Jia-Ju Bai Reviewed-by: Leon Romanovsky Acked-by: Moni Shoua Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe_verbs.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c index 83d709e74dfb..073e66783f1d 100644 --- a/drivers/infiniband/sw/rxe/rxe_verbs.c +++ b/drivers/infiniband/sw/rxe/rxe_verbs.c @@ -740,13 +740,8 @@ static int init_send_wqe(struct rxe_qp *qp, struct ib_send_wr *ibwr, sge = ibwr->sg_list; for (i = 0; i < num_sge; i++, sge++) { - if (qp->is_user && copy_from_user(p, (__user void *) - (uintptr_t)sge->addr, sge->length)) - return -EFAULT; - - else if (!qp->is_user) - memcpy(p, (void *)(uintptr_t)sge->addr, - sge->length); + memcpy(p, (void *)(uintptr_t)sge->addr, + sge->length); p += sge->length; } From 03f219041fdbeb31cecff41bb1cb4e1018f9cf75 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Wed, 17 May 2017 12:21:07 +0100 Subject: [PATCH 0808/1065] ceph: check i_nlink while converting a file handle to dentry Converting a file handle to a dentry can be done call after the inode unlink. This means that __fh_to_dentry() requires an extra check to verify the number of links is not 0. The issue can be easily reproduced using xfstest generic/426, which does something like: name_to_handle_at(&fh) echo 3 > /proc/sys/vm/drop_caches unlink() open_by_handle_at(&fh) The call to open_by_handle_at() should fail, as the file doesn't exist anymore. Link: http://tracker.ceph.com/issues/19958 Signed-off-by: Luis Henriques Reviewed-by: "Yan, Zheng" Signed-off-by: Ilya Dryomov --- fs/ceph/export.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ceph/export.c b/fs/ceph/export.c index e8f11fa565c5..7df550c13d7f 100644 --- a/fs/ceph/export.c +++ b/fs/ceph/export.c @@ -91,6 +91,10 @@ static struct dentry *__fh_to_dentry(struct super_block *sb, u64 ino) ceph_mdsc_put_request(req); if (!inode) return ERR_PTR(-ESTALE); + if (inode->i_nlink == 0) { + iput(inode); + return ERR_PTR(-ESTALE); + } } return d_obtain_alias(inode); From 56199016e8672feb7b903eda003a863d5bf2b8c4 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 1 Jun 2017 16:44:53 +0800 Subject: [PATCH 0809/1065] ceph: use current_kernel_time() to get request time stamp ceph uses ktime_get_real_ts() to get request time stamp. In most other cases, current_kernel_time() is used to get time stamp for filesystem operations (called by current_time()). There is granularity difference between ktime_get_real_ts() and current_kernel_time(). The later one can be up to one jiffy behind the former one. This can causes inode's ctime to go back. Signed-off-by: "Yan, Zheng" Signed-off-by: Ilya Dryomov --- fs/ceph/mds_client.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index f38e56fa9712..0c05df44cc6c 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -1687,7 +1687,6 @@ struct ceph_mds_request * ceph_mdsc_create_request(struct ceph_mds_client *mdsc, int op, int mode) { struct ceph_mds_request *req = kzalloc(sizeof(*req), GFP_NOFS); - struct timespec ts; if (!req) return ERR_PTR(-ENOMEM); @@ -1706,8 +1705,7 @@ ceph_mdsc_create_request(struct ceph_mds_client *mdsc, int op, int mode) init_completion(&req->r_safe_completion); INIT_LIST_HEAD(&req->r_unsafe_item); - ktime_get_real_ts(&ts); - req->r_stamp = timespec_trunc(ts, mdsc->fsc->sb->s_time_gran); + req->r_stamp = timespec_trunc(current_kernel_time(), mdsc->fsc->sb->s_time_gran); req->r_op = op; req->r_direct_mode = mode; From 4ca2fea6f8277ab381bd08b996d641255b6f7b00 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 1 Jun 2017 17:08:00 +0800 Subject: [PATCH 0810/1065] ceph: unify inode i_ctime update Current __ceph_setattr() can set inode's i_ctime to current_time(), req->r_stamp or attr->ia_ctime. These time stamps may have minor differences. It may cause potential problem. Signed-off-by: "Yan, Zheng" Acked-by: Arnd Bergmann Signed-off-by: Ilya Dryomov --- fs/ceph/acl.c | 1 + fs/ceph/inode.c | 5 ++--- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ceph/acl.c b/fs/ceph/acl.c index 987044bca1c2..59cb307b15fb 100644 --- a/fs/ceph/acl.c +++ b/fs/ceph/acl.c @@ -131,6 +131,7 @@ int ceph_set_acl(struct inode *inode, struct posix_acl *acl, int type) } if (new_mode != old_mode) { + newattrs.ia_ctime = current_time(inode); newattrs.ia_mode = new_mode; newattrs.ia_valid = ATTR_MODE; ret = __ceph_setattr(inode, &newattrs); diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index dcce79b84406..4de6cdddf059 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -2022,7 +2022,6 @@ int __ceph_setattr(struct inode *inode, struct iattr *attr) attr->ia_size > inode->i_size) { i_size_write(inode, attr->ia_size); inode->i_blocks = calc_inode_blocks(attr->ia_size); - inode->i_ctime = attr->ia_ctime; ci->i_reported_size = attr->ia_size; dirtied |= CEPH_CAP_FILE_EXCL; } else if ((issued & CEPH_CAP_FILE_SHARED) == 0 || @@ -2044,7 +2043,6 @@ int __ceph_setattr(struct inode *inode, struct iattr *attr) inode->i_ctime.tv_sec, inode->i_ctime.tv_nsec, attr->ia_ctime.tv_sec, attr->ia_ctime.tv_nsec, only ? "ctime only" : "ignored"); - inode->i_ctime = attr->ia_ctime; if (only) { /* * if kernel wants to dirty ctime but nothing else, @@ -2067,7 +2065,7 @@ int __ceph_setattr(struct inode *inode, struct iattr *attr) if (dirtied) { inode_dirty_flags = __ceph_mark_dirty_caps(ci, dirtied, &prealloc_cf); - inode->i_ctime = current_time(inode); + inode->i_ctime = attr->ia_ctime; } release &= issued; @@ -2085,6 +2083,7 @@ int __ceph_setattr(struct inode *inode, struct iattr *attr) req->r_inode_drop = release; req->r_args.setattr.mask = cpu_to_le32(mask); req->r_num_caps = 1; + req->r_stamp = attr->ia_ctime; err = ceph_mdsc_do_request(mdsc, NULL, req); } dout("setattr %p result=%d (%s locally, %d remote)\n", inode, err, From 74030603dfd9f76c0f279f19f1dd1ee3028fee7a Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 13 Jun 2017 13:36:24 -0700 Subject: [PATCH 0811/1065] net_sched: move tcf_lock down after gen_replace_estimator() Laura reported a sleep-in-atomic kernel warning inside tcf_act_police_init() which calls gen_replace_estimator() with spinlock protection. It is not necessary in this case, we already have RTNL lock here so it is enough to protect concurrent writers. For the reader, i.e. tcf_act_police(), it needs to make decision based on this rate estimator, in the worst case we drop more/less packets than necessary while changing the rate in parallel, it is still acceptable. Reported-by: Laura Abbott Reported-by: Nick Huber Cc: Jamal Hadi Salim Signed-off-by: Cong Wang Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- net/sched/act_police.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/net/sched/act_police.c b/net/sched/act_police.c index f42008b29311..b062bc80c7cb 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -132,21 +132,21 @@ static int tcf_act_police_init(struct net *net, struct nlattr *nla, } } - spin_lock_bh(&police->tcf_lock); if (est) { err = gen_replace_estimator(&police->tcf_bstats, NULL, &police->tcf_rate_est, &police->tcf_lock, NULL, est); if (err) - goto failure_unlock; + goto failure; } else if (tb[TCA_POLICE_AVRATE] && (ret == ACT_P_CREATED || !gen_estimator_active(&police->tcf_rate_est))) { err = -EINVAL; - goto failure_unlock; + goto failure; } + spin_lock_bh(&police->tcf_lock); /* No failure allowed after this point */ police->tcfp_mtu = parm->mtu; if (police->tcfp_mtu == 0) { @@ -192,8 +192,6 @@ static int tcf_act_police_init(struct net *net, struct nlattr *nla, return ret; -failure_unlock: - spin_unlock_bh(&police->tcf_lock); failure: qdisc_put_rtab(P_tab); qdisc_put_rtab(R_tab); From 7a1ac110c22eb726684c837544a2d42c33e07be7 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 9 Jun 2017 16:54:28 -0300 Subject: [PATCH 0812/1065] perf evsel: Fix probing of precise_ip level for default cycles event Since commit 18e7a45af91a ("perf/x86: Reject non sampling events with precise_ip") returns -EINVAL for sys_perf_event_open() with an attribute with (attr.precise_ip > 0 && attr.sample_period == 0), just like is done in the routine used to probe the max precise level when no events were passed to 'perf record' or 'perf top', i.e.: perf_evsel__new_cycles() perf_event_attr__set_max_precise_ip() The x86 code, in x86_pmu_hw_config(), which is called all the way from sys_perf_event_open() did, starting with the aforementioned commit: /* There's no sense in having PEBS for non sampling events: */ if (!is_sampling_event(event)) return -EINVAL; Which makes it fail for cycles:ppp, cycles:pp and cycles:p, always using just the non precise cycles variant. To make sure that this is the case, I tested it, before this patch, with: # perf probe -L x86_pmu_hw_config 0 int x86_pmu_hw_config(struct perf_event *event) 1 { 2 if (event->attr.precise_ip) { 17 if (event->attr.precise_ip > precise) 18 return -EOPNOTSUPP; /* There's no sense in having PEBS for non sampling events: */ 21 if (!is_sampling_event(event)) 22 return -EINVAL; } # perf probe x86_pmu_hw_config:22 Added new events: probe:x86_pmu_hw_config (on x86_pmu_hw_config:22) probe:x86_pmu_hw_config_1 (on x86_pmu_hw_config:22) You can now use it in all perf tools, such as: perf record -e probe:x86_pmu_hw_config_1 -aR sleep 1 # perf trace -e perf_event_open,probe:x86_pmu_hwconfig*/max-stack=16/ perf record usleep 1 0.000 ( 0.015 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ... 0.015 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1)) x86_pmu_hw_config ([kernel.kallsyms]) hsw_hw_config ([kernel.kallsyms]) x86_pmu_event_init ([kernel.kallsyms]) perf_try_init_event ([kernel.kallsyms]) perf_event_alloc ([kernel.kallsyms]) SYSC_perf_event_open ([kernel.kallsyms]) sys_perf_event_open ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) return_from_SYSCALL_64 ([kernel.kallsyms]) syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) perf_evsel__new_cycles (/home/acme/bin/perf) perf_evlist__add_default (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) handle_internal_command (/home/acme/bin/perf) 0.000 ( 0.021 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument 0.023 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ... 0.025 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1)) x86_pmu_hw_config ([kernel.kallsyms]) hsw_hw_config ([kernel.kallsyms]) x86_pmu_event_init ([kernel.kallsyms]) perf_try_init_event ([kernel.kallsyms]) perf_event_alloc ([kernel.kallsyms]) SYSC_perf_event_open ([kernel.kallsyms]) sys_perf_event_open ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) return_from_SYSCALL_64 ([kernel.kallsyms]) syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) perf_evsel__new_cycles (/home/acme/bin/perf) perf_evlist__add_default (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) handle_internal_command (/home/acme/bin/perf) 0.023 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument 0.028 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ... 0.030 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1)) x86_pmu_hw_config ([kernel.kallsyms]) hsw_hw_config ([kernel.kallsyms]) x86_pmu_event_init ([kernel.kallsyms]) perf_try_init_event ([kernel.kallsyms]) perf_event_alloc ([kernel.kallsyms]) SYSC_perf_event_open ([kernel.kallsyms]) sys_perf_event_open ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) return_from_SYSCALL_64 ([kernel.kallsyms]) syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) perf_evsel__new_cycles (/home/acme/bin/perf) perf_evlist__add_default (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) handle_internal_command (/home/acme/bin/perf) 0.028 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument 41.018 ( 0.012 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8b5dd0, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 41.065 ( 0.011 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 41.080 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 41.103 ( 0.010 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4 41.115 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5 41.122 ( 0.004 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6 41.128 ( 0.008 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ] # I.e. that return -EINVAL in x86_pmu_hw_config() is hit three times. So fix it by just setting attr.sample_period Now, after this patch: # perf trace --max-stack=2 -e perf_event_open,probe:x86_pmu_hw_config* perf record usleep 1 [ perf record: Woken up 1 times to write data ] 0.000 ( 0.017 ms): perf/8469 perf_event_open(attr_uptr: 0x7ffe36c27d10, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_event_open_cloexec_flag (/home/acme/bin/perf) 0.050 ( 0.031 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_evlist__config (/home/acme/bin/perf) 0.092 ( 0.040 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_evlist__config (/home/acme/bin/perf) 0.143 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, cpu: -1, group_fd: -1 ) = 4 syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) 0.161 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) 0.171 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) 0.180 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) 0.190 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # The probe one called from perf_event_attr__set_max_precise_ip() works the first time, with attr.precise_ip = 3, wit hthe next ones being the per cpu ones for the cycles:ppp event. And here is the text from a report and alternative proposed patch by Thomas-Mich Richter: --- On s390 the counter and sampling facility do not support a precise IP skid level and sometimes returns EOPNOTSUPP when structure member precise_ip in struct perf_event_attr is not set to zero. On s390 commnd 'perf record -- true' fails with error EOPNOTSUPP. This happens only when no events are specified on command line. The functions called are ... --> perf_evlist__add_default --> perf_evsel__new_cycles --> perf_event_attr__set_max_precise_ip The last function determines the value of structure member precise_ip by invoking the perf_event_open() system call and checking the return code. The first successful open is the value for precise_ip. However the value is determined without setting member sample_period and indicates no sampling. On s390 the counter facility and sampling facility are different. The above procedure determines a precise_ip value of 3 using the counter facility. Later it uses the sampling facility with a value of 3 and fails with EOPNOTSUPP. --- v2: Older compilers (e.g. gcc 4.4.7) don't support referencing members of unnamed union members in the container struct initialization, so move from: struct perf_event_attr attr = { ... .sample_period = 1, }; to right after it as: struct perf_event_attr attr = { ... }; attr.sample_period = 1; v3: We need to reset .sample_period to 0 to let the users of perf_evsel__new_cycles() to properly setup attr.sample_period or attr.sample_freq. Reported by Ingo Molnar. Reported-and-Acked-by: Thomas-Mich Richter Acked-by: Hendrik Brueckner Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: Alexander Shishkin Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Wang Nan Fixes: 18e7a45af91a ("perf/x86: Reject non sampling events with precise_ip") Link: http://lkml.kernel.org/n/tip-yv6nnkl7tzqocrm0hl3x7vf1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/task-exit.c | 2 +- tools/perf/util/evsel.c | 12 ++++++++++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/tools/perf/tests/task-exit.c b/tools/perf/tests/task-exit.c index 32873ec91a4e..cf00ebad2ef5 100644 --- a/tools/perf/tests/task-exit.c +++ b/tools/perf/tests/task-exit.c @@ -83,7 +83,7 @@ int test__task_exit(int subtest __maybe_unused) evsel = perf_evlist__first(evlist); evsel->attr.task = 1; - evsel->attr.sample_freq = 0; + evsel->attr.sample_freq = 1; evsel->attr.inherit = 0; evsel->attr.watermark = 0; evsel->attr.wakeup_events = 1; diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index e4f7902d5afa..cda44b0e821c 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -273,8 +273,20 @@ struct perf_evsel *perf_evsel__new_cycles(void) struct perf_evsel *evsel; event_attr_init(&attr); + /* + * Unnamed union member, not supported as struct member named + * initializer in older compilers such as gcc 4.4.7 + * + * Just for probing the precise_ip: + */ + attr.sample_period = 1; perf_event_attr__set_max_precise_ip(&attr); + /* + * Now let the usual logic to set up the perf_event_attr defaults + * to kick in when we return and before perf_evsel__open() is called. + */ + attr.sample_period = 0; evsel = perf_evsel__new(&attr); if (evsel == NULL) From 7a759cd8e8272ee18922838ee711219c7c796a31 Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Sun, 9 Apr 2017 20:02:37 -0700 Subject: [PATCH 0813/1065] perf tools: Fix build with ARCH=x86_64 With commit: 0a943cb10ce78 (tools build: Add HOSTARCH Makefile variable) when building for ARCH=x86_64, ARCH=x86_64 is passed to perf instead of ARCH=x86, so the perf build process searchs header files from tools/arch/x86_64/include, which doesn't exist. The following build failure is seen: In file included from util/event.c:2:0: tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h: No such file or directory compilation terminated. Fix this issue by using SRCARCH instead of ARCH in perf, just like the main kernel Makefile and tools/objtool's. Signed-off-by: Jiada Wang Tested-by: Arnaldo Carvalho de Melo Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Andi Kleen Cc: Eugeniu Rosca Cc: Jan Stancek Cc: Masami Hiramatsu Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Rui Teng Cc: Sukadev Bhattiprolu Cc: Wang Nan Fixes: 0a943cb10ce7 ("tools build: Add HOSTARCH Makefile variable") Link: http://lkml.kernel.org/r/1491793357-14977-2-git-send-email-jiada_wang@mentor.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.config | 38 ++++++++++++++++++------------------- tools/perf/Makefile.perf | 2 +- tools/perf/arch/Build | 2 +- tools/perf/pmu-events/Build | 4 ++-- tools/perf/tests/Build | 2 +- tools/perf/util/header.c | 2 +- 6 files changed, 25 insertions(+), 25 deletions(-) diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config index 8354d04b392f..1f4fbc9a3292 100644 --- a/tools/perf/Makefile.config +++ b/tools/perf/Makefile.config @@ -19,18 +19,18 @@ CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS) include $(srctree)/tools/scripts/Makefile.arch -$(call detected_var,ARCH) +$(call detected_var,SRCARCH) NO_PERF_REGS := 1 # Additional ARCH settings for ppc -ifeq ($(ARCH),powerpc) +ifeq ($(SRCARCH),powerpc) NO_PERF_REGS := 0 LIBUNWIND_LIBS := -lunwind -lunwind-ppc64 endif # Additional ARCH settings for x86 -ifeq ($(ARCH),x86) +ifeq ($(SRCARCH),x86) $(call detected,CONFIG_X86) ifeq (${IS_64_BIT}, 1) CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT -DHAVE_SYSCALL_TABLE -I$(OUTPUT)arch/x86/include/generated @@ -43,12 +43,12 @@ ifeq ($(ARCH),x86) NO_PERF_REGS := 0 endif -ifeq ($(ARCH),arm) +ifeq ($(SRCARCH),arm) NO_PERF_REGS := 0 LIBUNWIND_LIBS = -lunwind -lunwind-arm endif -ifeq ($(ARCH),arm64) +ifeq ($(SRCARCH),arm64) NO_PERF_REGS := 0 LIBUNWIND_LIBS = -lunwind -lunwind-aarch64 endif @@ -61,7 +61,7 @@ endif # Disable it on all other architectures in case libdw unwind # support is detected in system. Add supported architectures # to the check. -ifneq ($(ARCH),$(filter $(ARCH),x86 arm)) +ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm)) NO_LIBDW_DWARF_UNWIND := 1 endif @@ -115,9 +115,9 @@ endif FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS) FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf -FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(ARCH)/include/uapi -I$(srctree)/tools/include/uapi +FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi -I$(srctree)/tools/include/uapi # include ARCH specific config --include $(src-perf)/arch/$(ARCH)/Makefile +-include $(src-perf)/arch/$(SRCARCH)/Makefile ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET CFLAGS += -DHAVE_ARCH_REGS_QUERY_REGISTER_OFFSET @@ -228,12 +228,12 @@ ifeq ($(DEBUG),0) endif INC_FLAGS += -I$(src-perf)/util/include -INC_FLAGS += -I$(src-perf)/arch/$(ARCH)/include +INC_FLAGS += -I$(src-perf)/arch/$(SRCARCH)/include INC_FLAGS += -I$(srctree)/tools/include/uapi INC_FLAGS += -I$(srctree)/tools/include/ -INC_FLAGS += -I$(srctree)/tools/arch/$(ARCH)/include/uapi -INC_FLAGS += -I$(srctree)/tools/arch/$(ARCH)/include/ -INC_FLAGS += -I$(srctree)/tools/arch/$(ARCH)/ +INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi +INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/ +INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/ # $(obj-perf) for generated common-cmds.h # $(obj-perf)/util for generated bison/flex headers @@ -355,7 +355,7 @@ ifndef NO_LIBELF ifndef NO_DWARF ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined) - msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled); + msg := $(warning DWARF register mappings have not been defined for architecture $(SRCARCH), DWARF support disabled); NO_DWARF := 1 else CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS) @@ -380,7 +380,7 @@ ifndef NO_LIBELF CFLAGS += -DHAVE_BPF_PROLOGUE $(call detected,CONFIG_BPF_PROLOGUE) else - msg := $(warning BPF prologue is not supported by architecture $(ARCH), missing regs_query_register_offset()); + msg := $(warning BPF prologue is not supported by architecture $(SRCARCH), missing regs_query_register_offset()); endif else msg := $(warning DWARF support is off, BPF prologue is disabled); @@ -406,7 +406,7 @@ ifdef PERF_HAVE_JITDUMP endif endif -ifeq ($(ARCH),powerpc) +ifeq ($(SRCARCH),powerpc) ifndef NO_DWARF CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX endif @@ -487,7 +487,7 @@ else endif ifndef NO_LOCAL_LIBUNWIND - ifeq ($(ARCH),$(filter $(ARCH),arm arm64)) + ifeq ($(SRCARCH),$(filter $(SRCARCH),arm arm64)) $(call feature_check,libunwind-debug-frame) ifneq ($(feature-libunwind-debug-frame), 1) msg := $(warning No debug_frame support found in libunwind); @@ -740,7 +740,7 @@ ifeq (${IS_64_BIT}, 1) NO_PERF_READ_VDSO32 := 1 endif endif - ifneq ($(ARCH), x86) + ifneq ($(SRCARCH), x86) NO_PERF_READ_VDSOX32 := 1 endif ifndef NO_PERF_READ_VDSOX32 @@ -769,7 +769,7 @@ ifdef LIBBABELTRACE endif ifndef NO_AUXTRACE - ifeq ($(ARCH),x86) + ifeq ($(SRCARCH),x86) ifeq ($(feature-get_cpuid), 0) msg := $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc); NO_AUXTRACE := 1 @@ -872,7 +872,7 @@ sysconfdir = $(prefix)/etc ETC_PERFCONFIG = etc/perfconfig endif ifndef lib -ifeq ($(ARCH)$(IS_64_BIT), x861) +ifeq ($(SRCARCH)$(IS_64_BIT), x861) lib = lib64 else lib = lib diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index 79fe31f20a17..5008f51a08a2 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -226,7 +226,7 @@ endif ifeq ($(config),0) include $(srctree)/tools/scripts/Makefile.arch --include arch/$(ARCH)/Makefile +-include arch/$(SRCARCH)/Makefile endif # The FEATURE_DUMP_EXPORT holds location of the actual diff --git a/tools/perf/arch/Build b/tools/perf/arch/Build index 109eb75cf7de..d9b6af837c7d 100644 --- a/tools/perf/arch/Build +++ b/tools/perf/arch/Build @@ -1,2 +1,2 @@ libperf-y += common.o -libperf-y += $(ARCH)/ +libperf-y += $(SRCARCH)/ diff --git a/tools/perf/pmu-events/Build b/tools/perf/pmu-events/Build index 9213a1273697..999a4e878162 100644 --- a/tools/perf/pmu-events/Build +++ b/tools/perf/pmu-events/Build @@ -2,7 +2,7 @@ hostprogs := jevents jevents-y += json.o jsmn.o jevents.o pmu-events-y += pmu-events.o -JDIR = pmu-events/arch/$(ARCH) +JDIR = pmu-events/arch/$(SRCARCH) JSON = $(shell [ -d $(JDIR) ] && \ find $(JDIR) -name '*.json' -o -name 'mapfile.csv') # @@ -10,4 +10,4 @@ JSON = $(shell [ -d $(JDIR) ] && \ # directory and create tables in pmu-events.c. # $(OUTPUT)pmu-events/pmu-events.c: $(JSON) $(JEVENTS) - $(Q)$(call echo-cmd,gen)$(JEVENTS) $(ARCH) pmu-events/arch $(OUTPUT)pmu-events/pmu-events.c $(V) + $(Q)$(call echo-cmd,gen)$(JEVENTS) $(SRCARCH) pmu-events/arch $(OUTPUT)pmu-events/pmu-events.c $(V) diff --git a/tools/perf/tests/Build b/tools/perf/tests/Build index af58ebc243ef..84222bdb8689 100644 --- a/tools/perf/tests/Build +++ b/tools/perf/tests/Build @@ -75,7 +75,7 @@ $(OUTPUT)tests/llvm-src-relocation.c: tests/bpf-script-test-relocation.c tests/B $(Q)sed -e 's/"/\\"/g' -e 's/\(.*\)/"\1\\n"/g' $< >> $@ $(Q)echo ';' >> $@ -ifeq ($(ARCH),$(filter $(ARCH),x86 arm arm64 powerpc)) +ifeq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc)) perf-$(CONFIG_DWARF_UNWIND) += dwarf-unwind.o endif diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 5cac8d5e009a..b5baff3007bb 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -841,7 +841,7 @@ static int write_group_desc(int fd, struct perf_header *h __maybe_unused, /* * default get_cpuid(): nothing gets recorded - * actual implementation must be in arch/$(ARCH)/util/header.c + * actual implementation must be in arch/$(SRCARCH)/util/header.c */ int __weak get_cpuid(char *buffer __maybe_unused, size_t sz __maybe_unused) { From db46a0e1be7eac45d0bb1bdcd438b8d47c920451 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 14 Jun 2017 16:15:24 +0900 Subject: [PATCH 0814/1065] net: update undefined ->ndo_change_mtu() comment Update ->ndo_change_mtu() callback comment to remove text about returning error in case of undefined callback. This change makes the comment match the existing code behavior. Signed-off-by: Magnus Damm Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 846193dfb0ac..4ed952c17fc7 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -914,8 +914,7 @@ struct xfrmdev_ops { * * int (*ndo_change_mtu)(struct net_device *dev, int new_mtu); * Called when a user wants to change the Maximum Transfer Unit - * of a device. If not defined, any request to change MTU will - * will return an error. + * of a device. * * void (*ndo_tx_timeout)(struct net_device *dev); * Callback used when the transmitter has not made any progress From ab156afd3eeb68ce7b875ec8d9ff4f64d1427776 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Wed, 14 Jun 2017 09:59:05 +0300 Subject: [PATCH 0815/1065] IB/ipoib: Fix memory leaks for child interfaces priv There is a need to free priv explicitly and not just to release the device, child priv is freed explicitly on remove flow and this patch also includes priv free on error flow in P_key creation and also in add_port. Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 7 ++++++- drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 5 ++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index a115c0b7a310..0ddd9709e1df 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -2237,6 +2237,7 @@ event_failed: device_init_failed: free_netdev(priv->dev); + kfree(priv); alloc_mem_failed: return ERR_PTR(result); @@ -2277,7 +2278,7 @@ static void ipoib_add_one(struct ib_device *device) static void ipoib_remove_one(struct ib_device *device, void *client_data) { - struct ipoib_dev_priv *priv, *tmp; + struct ipoib_dev_priv *priv, *tmp, *cpriv, *tcpriv; struct list_head *dev_list = client_data; if (!dev_list) @@ -2301,6 +2302,10 @@ static void ipoib_remove_one(struct ib_device *device, void *client_data) unregister_netdev(priv->dev); free_netdev(priv->dev); + + list_for_each_entry_safe(cpriv, tcpriv, &priv->child_intfs, list) + kfree(cpriv); + kfree(priv); } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 36dc4fcaa3cd..1ee46194bbf5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -167,8 +167,10 @@ out: rtnl_unlock(); - if (result) + if (result) { free_netdev(priv->dev); + kfree(priv); + } return result; } @@ -209,6 +211,7 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey) if (dev) { free_netdev(dev); + kfree(priv); return 0; } From 022d038a163f9e889428789d681b97bf07730fb7 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Wed, 14 Jun 2017 09:59:06 +0300 Subject: [PATCH 0816/1065] IB/ipoib: Limit call to free rdma_netdev for capable devices Limit calls to free_rdma_netdev() for capable devices only. Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 6 ++++-- drivers/infiniband/ulp/ipoib/ipoib_main.c | 5 ++++- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 0c79983c8b1a..9ecc089d4529 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -3692,8 +3692,10 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev) dev->ib_dev.check_mr_status = mlx5_ib_check_mr_status; dev->ib_dev.get_port_immutable = mlx5_port_immutable; dev->ib_dev.get_dev_fw_str = get_dev_fw_str; - dev->ib_dev.alloc_rdma_netdev = mlx5_ib_alloc_rdma_netdev; - dev->ib_dev.free_rdma_netdev = mlx5_ib_free_rdma_netdev; + if (MLX5_CAP_GEN(mdev, ipoib_enhanced_offloads)) { + dev->ib_dev.alloc_rdma_netdev = mlx5_ib_alloc_rdma_netdev; + dev->ib_dev.free_rdma_netdev = mlx5_ib_free_rdma_netdev; + } if (mlx5_core_is_pf(mdev)) { dev->ib_dev.get_vf_config = mlx5_ib_get_vf_config; dev->ib_dev.set_vf_link_state = mlx5_ib_set_vf_link_state; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 0ddd9709e1df..91fae34bdd4f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -2301,7 +2301,10 @@ static void ipoib_remove_one(struct ib_device *device, void *client_data) flush_workqueue(priv->wq); unregister_netdev(priv->dev); - free_netdev(priv->dev); + if (device->free_rdma_netdev) + device->free_rdma_netdev(priv->dev); + else + free_netdev(priv->dev); list_for_each_entry_safe(cpriv, tcpriv, &priv->child_intfs, list) kfree(cpriv); From b53d4566cc117d9ab8d20b365ba7c2a519439725 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Wed, 14 Jun 2017 09:59:07 +0300 Subject: [PATCH 0817/1065] IB/ipoib: Delete napi in device uninit default This patch mekas init_default and uninit_default symmetric with a call to delete napi. Additionally, the uninit_default gained delete napi call in case of init_default fails. Fixes: 515ed4f3aab4 ('IB/IPoIB: Separate control and data related initializations') Signed-off-by: Alex Vesker Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 91fae34bdd4f..1015a63de6ae 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1596,6 +1596,8 @@ static void ipoib_dev_uninit_default(struct net_device *dev) ipoib_transport_dev_cleanup(dev); + netif_napi_del(&priv->napi); + ipoib_cm_dev_cleanup(dev); kfree(priv->rx_ring); @@ -1649,6 +1651,7 @@ out_rx_ring_cleanup: kfree(priv->rx_ring); out: + netif_napi_del(&priv->napi); return -ENOMEM; } From 560b7c3ffec1ca7d5de250d8ca7b1ca2349e98a4 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Wed, 14 Jun 2017 09:59:08 +0300 Subject: [PATCH 0818/1065] IB/ipoib: Fix access to un-initialized napi struct There is no need to re-enable napi since we set the initialized flag before calling ipoib_ib_dev_stop which will disable napi, disabling napi twice is harmless in case it was already disabled. One more reason for this fix is that when using IPoIB new device driver napi is not added to priv, this can lead to kernel panic when rn_ops ndo_open fails. [ 289.755840] invalid opcode: 0000 [#1] SMP [ 289.757111] task: ffff880036964440 ti: ffff880178ee8000 task.ti: ffff880178ee8000 [ 289.757111] RIP: 0010:[] [] napi_enable.part.24+0x4/0x6 [ib_ipoib] [ 289.757111] RSP: 0018:ffff880178eeb6d8 EFLAGS: 00010246 [ 289.757111] RAX: 0000000000000000 RBX: ffff880177a80010 RCX: 000000007fffffff [ 289.757111] RDX: ffffffff81d5f118 RSI: 0000000000000000 RDI: ffff880177a80010 [ 289.757111] RBP: ffff880178eeb6d8 R08: 0000000000000082 R09: 0000000000000283 [ 289.757111] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175a00000 [ 289.757111] R13: ffff880177a80080 R14: 0000000000000000 R15: 0000000000000001 [ 289.757111] FS: 00007fe2ee346880(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 289.757111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 289.757111] CR2: 00007fffca979020 CR3: 00000001792e4000 CR4: 00000000000006f0 [ 289.757111] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 289.757111] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 289.757111] Stack: [ 289.796027] ffff880178eeb6f0 ffffffffa05251f5 ffff880177a80000 ffff880178eeb718 [ 289.796027] ffffffffa0528505 ffff880175a00000 ffff880177a80000 0000000000000000 [ 289.796027] ffff880178eeb748 ffffffffa051f0ab ffff880175a00000 ffffffffa0537d60 [ 289.796027] Call Trace: [ 289.796027] [] napi_enable+0x25/0x30 [ib_ipoib] [ 289.796027] [] ipoib_ib_dev_open+0x175/0x190 [ib_ipoib] [ 289.796027] [] ipoib_open+0x4b/0x160 [ib_ipoib] [ 289.796027] [] _dev_open+0xbf/0x130 [ 289.796027] [] __dev_change_flags+0x9d/0x170 [ 289.796027] [] dev_change_flags+0x29/0x60 [ 289.796027] [] do_setlink+0x397/0xa40 Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 0060b2f9f659..efe7402f4885 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -863,7 +863,6 @@ dev_stop: set_bit(IPOIB_STOP_REAPER, &priv->flags); cancel_delayed_work(&priv->ah_reap_task); set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags); - napi_enable(&priv->napi); ipoib_ib_dev_stop(dev); return -1; } From 4542d66bb26f2d021c70a78e46f183c6675fc4c9 Mon Sep 17 00:00:00 2001 From: Feras Daoud Date: Wed, 14 Jun 2017 09:59:09 +0300 Subject: [PATCH 0819/1065] IB/ipoib: Fix memory leak in create child syscall The flow of creating a new child goes through ipoib_vlan_add which allocates a new interface and checks the rtnl_lock. If the lock is taken, restart_syscall will be called to restart the system call again. In this case we are not releasing the already allocated interface, causing a leak. Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support") Signed-off-by: Feras Daoud Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 1ee46194bbf5..081b33deff1b 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -133,13 +133,13 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) snprintf(intf_name, sizeof intf_name, "%s.%04x", ppriv->dev->name, pkey); + if (!rtnl_trylock()) + return restart_syscall(); + priv = ipoib_intf_alloc(ppriv->ca, ppriv->port, intf_name); if (!priv) return -ENOMEM; - if (!rtnl_trylock()) - return restart_syscall(); - down_write(&ppriv->vlan_rwsem); /* From 96ecff14225ad40a29f4d5cfa6bd9266c8e1e89a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 14 Jun 2017 15:17:32 -0400 Subject: [PATCH 0820/1065] ufs: fix logics in "ufs: make fsck -f happy" Storing stats _only_ at new locations is wrong for UFS1; old locations should always be kept updated. The check for "has been converted to use of new locations" is also wrong - it should be "->fs_maxbsize is equal to ->fs_bsize". Signed-off-by: Al Viro --- fs/ufs/super.c | 41 ++++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 13 deletions(-) diff --git a/fs/ufs/super.c b/fs/ufs/super.c index d9aa2627c9df..eca838a8b43e 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -480,7 +480,7 @@ static void ufs_setup_cstotal(struct super_block *sb) usb3 = ubh_get_usb_third(uspi); if ((mtype == UFS_MOUNT_UFSTYPE_44BSD && - (usb1->fs_flags & UFS_FLAGS_UPDATED)) || + (usb2->fs_un.fs_u2.fs_maxbsize == usb1->fs_bsize)) || mtype == UFS_MOUNT_UFSTYPE_UFS2) { /*we have statistic in different place, then usual*/ uspi->cs_total.cs_ndir = fs64_to_cpu(sb, usb2->fs_un.fs_u2.cs_ndir); @@ -596,9 +596,7 @@ static void ufs_put_cstotal(struct super_block *sb) usb2 = ubh_get_usb_second(uspi); usb3 = ubh_get_usb_third(uspi); - if ((mtype == UFS_MOUNT_UFSTYPE_44BSD && - (usb1->fs_flags & UFS_FLAGS_UPDATED)) || - mtype == UFS_MOUNT_UFSTYPE_UFS2) { + if (mtype == UFS_MOUNT_UFSTYPE_UFS2) { /*we have statistic in different place, then usual*/ usb2->fs_un.fs_u2.cs_ndir = cpu_to_fs64(sb, uspi->cs_total.cs_ndir); @@ -608,16 +606,26 @@ static void ufs_put_cstotal(struct super_block *sb) cpu_to_fs64(sb, uspi->cs_total.cs_nifree); usb3->fs_un1.fs_u2.cs_nffree = cpu_to_fs64(sb, uspi->cs_total.cs_nffree); - } else { - usb1->fs_cstotal.cs_ndir = - cpu_to_fs32(sb, uspi->cs_total.cs_ndir); - usb1->fs_cstotal.cs_nbfree = - cpu_to_fs32(sb, uspi->cs_total.cs_nbfree); - usb1->fs_cstotal.cs_nifree = - cpu_to_fs32(sb, uspi->cs_total.cs_nifree); - usb1->fs_cstotal.cs_nffree = - cpu_to_fs32(sb, uspi->cs_total.cs_nffree); + goto out; } + + if (mtype == UFS_MOUNT_UFSTYPE_44BSD && + (usb2->fs_un.fs_u2.fs_maxbsize == usb1->fs_bsize)) { + /* store stats in both old and new places */ + usb2->fs_un.fs_u2.cs_ndir = + cpu_to_fs64(sb, uspi->cs_total.cs_ndir); + usb2->fs_un.fs_u2.cs_nbfree = + cpu_to_fs64(sb, uspi->cs_total.cs_nbfree); + usb3->fs_un1.fs_u2.cs_nifree = + cpu_to_fs64(sb, uspi->cs_total.cs_nifree); + usb3->fs_un1.fs_u2.cs_nffree = + cpu_to_fs64(sb, uspi->cs_total.cs_nffree); + } + usb1->fs_cstotal.cs_ndir = cpu_to_fs32(sb, uspi->cs_total.cs_ndir); + usb1->fs_cstotal.cs_nbfree = cpu_to_fs32(sb, uspi->cs_total.cs_nbfree); + usb1->fs_cstotal.cs_nifree = cpu_to_fs32(sb, uspi->cs_total.cs_nifree); + usb1->fs_cstotal.cs_nffree = cpu_to_fs32(sb, uspi->cs_total.cs_nffree); +out: ubh_mark_buffer_dirty(USPI_UBH(uspi)); ufs_print_super_stuff(sb, usb1, usb2, usb3); UFSD("EXIT\n"); @@ -997,6 +1005,13 @@ again: flags |= UFS_ST_SUN; } + if ((flags & UFS_ST_MASK) == UFS_ST_44BSD && + uspi->s_postblformat == UFS_42POSTBLFMT) { + if (!silent) + pr_err("this is not a 44bsd filesystem"); + goto failed; + } + /* * Check ufs magic number */ From c4f65b09b459c6f0ec27b1a1a65302f7fea5c96f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 14 Jun 2017 13:29:31 +0300 Subject: [PATCH 0821/1065] net/act_pedit: fix an error code I'm reviewing static checker warnings where we do ERR_PTR(0), which is the same as NULL. I'm pretty sure we intended to return ERR_PTR(-EINVAL) here. Sometimes these bugs lead to a NULL dereference but I don't immediately see that problem here. Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by: Dan Carpenter Acked-by: Amir Vadai Signed-off-by: David S. Miller --- net/sched/act_pedit.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c index 164b5ac094be..7dc5892671c8 100644 --- a/net/sched/act_pedit.c +++ b/net/sched/act_pedit.c @@ -94,8 +94,10 @@ static struct tcf_pedit_key_ex *tcf_pedit_keys_ex_parse(struct nlattr *nla, k++; } - if (n) + if (n) { + err = -EINVAL; goto err_out; + } return keys_ex; From d4702645838c8e04893383b50406249382b4e6bf Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Fri, 9 Jun 2017 22:17:49 +0530 Subject: [PATCH 0822/1065] rdma/cxgb4: Fix memory leaks during module exit Fix memory leaks of iw_cxgb4 module in the exit path Signed-off-by: Raju Rangoju Reviewed-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/device.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index f96a96dbcf1f..ae0b79aeea2e 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -767,7 +767,7 @@ void c4iw_release_dev_ucontext(struct c4iw_rdev *rdev, kfree(entry); } - list_for_each_safe(pos, nxt, &uctx->qpids) { + list_for_each_safe(pos, nxt, &uctx->cqids) { entry = list_entry(pos, struct c4iw_qid_list, entry); list_del_init(&entry->entry); kfree(entry); @@ -880,13 +880,15 @@ static int c4iw_rdev_open(struct c4iw_rdev *rdev) rdev->free_workq = create_singlethread_workqueue("iw_cxgb4_free"); if (!rdev->free_workq) { err = -ENOMEM; - goto err_free_status_page; + goto err_free_status_page_and_wr_log; } rdev->status_page->db_off = 0; return 0; -err_free_status_page: +err_free_status_page_and_wr_log: + if (c4iw_wr_log && rdev->wr_log) + kfree(rdev->wr_log); free_page((unsigned long)rdev->status_page); destroy_ocqp_pool: c4iw_ocqp_pool_destroy(rdev); @@ -903,9 +905,11 @@ static void c4iw_rdev_close(struct c4iw_rdev *rdev) { destroy_workqueue(rdev->free_workq); kfree(rdev->wr_log); + c4iw_release_dev_ucontext(rdev, &rdev->uctx); free_page((unsigned long)rdev->status_page); c4iw_pblpool_destroy(rdev); c4iw_rqtpool_destroy(rdev); + c4iw_ocqp_pool_destroy(rdev); c4iw_destroy_resource(&rdev->resource); } From dc9edc44de6cd7cc8cc7f5b36c1adb221eda3207 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 14 Jun 2017 13:27:50 -0600 Subject: [PATCH 0823/1065] block: Fix a blk_exit_rl() regression Avoid that the following complaint is reported: BUG: sleeping function called from invalid context at kernel/workqueue.c:2790 in_atomic(): 1, irqs_disabled(): 0, pid: 41, name: rcuop/3 1 lock held by rcuop/3/41: #0: (rcu_callback){......}, at: [] rcu_nocb_kthread+0x282/0x500 Call Trace: dump_stack+0x86/0xcf ___might_sleep+0x174/0x260 __might_sleep+0x4a/0x80 flush_work+0x7e/0x2e0 __cancel_work_timer+0x143/0x1c0 cancel_work_sync+0x10/0x20 blk_throtl_exit+0x25/0x60 blkcg_exit_queue+0x35/0x40 blk_release_queue+0x42/0x130 kobject_put+0xa9/0x190 This happens since we invoke callbacks that need to block from the queue release handler. Fix this by pushing the final release to a workqueue. Reported-by: Ross Zwisler Fixes: commit b425e5049258 ("block: Avoid that blk_exit_rl() triggers a use-after-free") Signed-off-by: Bart Van Assche Tested-by: Ross Zwisler Updated changelog Signed-off-by: Jens Axboe --- block/blk-sysfs.c | 34 ++++++++++++++++++++++------------ include/linux/blkdev.h | 2 ++ 2 files changed, 24 insertions(+), 12 deletions(-) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 283da7fbe034..27aceab1cc31 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -777,24 +777,25 @@ static void blk_free_queue_rcu(struct rcu_head *rcu_head) } /** - * blk_release_queue: - release a &struct request_queue when it is no longer needed - * @kobj: the kobj belonging to the request queue to be released + * __blk_release_queue - release a request queue when it is no longer needed + * @work: pointer to the release_work member of the request queue to be released * * Description: - * blk_release_queue is the pair to blk_init_queue() or - * blk_queue_make_request(). It should be called when a request queue is - * being released; typically when a block device is being de-registered. - * Currently, its primary task it to free all the &struct request - * structures that were allocated to the queue and the queue itself. + * blk_release_queue is the counterpart of blk_init_queue(). It should be + * called when a request queue is being released; typically when a block + * device is being de-registered. Its primary task it to free the queue + * itself. * - * Note: + * Notes: * The low level driver must have finished any outstanding requests first * via blk_cleanup_queue(). - **/ -static void blk_release_queue(struct kobject *kobj) + * + * Although blk_release_queue() may be called with preemption disabled, + * __blk_release_queue() may sleep. + */ +static void __blk_release_queue(struct work_struct *work) { - struct request_queue *q = - container_of(kobj, struct request_queue, kobj); + struct request_queue *q = container_of(work, typeof(*q), release_work); if (test_bit(QUEUE_FLAG_POLL_STATS, &q->queue_flags)) blk_stat_remove_callback(q, q->poll_cb); @@ -834,6 +835,15 @@ static void blk_release_queue(struct kobject *kobj) call_rcu(&q->rcu_head, blk_free_queue_rcu); } +static void blk_release_queue(struct kobject *kobj) +{ + struct request_queue *q = + container_of(kobj, struct request_queue, kobj); + + INIT_WORK(&q->release_work, __blk_release_queue); + schedule_work(&q->release_work); +} + static const struct sysfs_ops queue_sysfs_ops = { .show = queue_attr_show, .store = queue_attr_store, diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ab92c4ea138b..b74a3edcb3da 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -586,6 +586,8 @@ struct request_queue { size_t cmd_size; void *rq_alloc_data; + + struct work_struct release_work; }; #define QUEUE_FLAG_QUEUED 1 /* uses generic tag queueing */ From 849a44de91636c24cea799cb8ad8c36433feb913 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Wed, 14 Jun 2017 13:27:37 +0200 Subject: [PATCH 0824/1065] net: don't global ICMP rate limit packets originating from loopback Florian Weimer seems to have a glibc test-case which requires that loopback interfaces does not get ICMP ratelimited. This was broken by commit c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited"). An ICMP response will usually be routed back-out the same incoming interface. Thus, take advantage of this and skip global ICMP ratelimit when the incoming device is loopback. In the unlikely event that the outgoing it not loopback, due to strange routing policy rules, ICMP rate limiting still works via peer ratelimiting via icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812 (section 4.3.2.8 "Rate Limiting"). This seems to fix the reproducer given by Florian. While still avoiding to perform expensive and unneeded outgoing route lookup for rate limited packets (in the non-loopback case). Fixes: c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited") Reported-by: Florian Weimer Reported-by: "H.J. Lu" Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- net/ipv4/icmp.c | 8 ++++++-- net/ipv6/icmp.c | 2 +- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 43318b5f5647..9144fa7df2ad 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -657,8 +657,12 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info) /* Needed by both icmp_global_allow and icmp_xmit_lock */ local_bh_disable(); - /* Check global sysctl_icmp_msgs_per_sec ratelimit */ - if (!icmpv4_global_allow(net, type, code)) + /* Check global sysctl_icmp_msgs_per_sec ratelimit, unless + * incoming dev is loopback. If outgoing dev change to not be + * loopback, then peer ratelimit still work (in icmpv4_xrlim_allow) + */ + if (!(skb_in->dev && (skb_in->dev->flags&IFF_LOOPBACK)) && + !icmpv4_global_allow(net, type, code)) goto out_bh_enable; sk = icmp_xmit_lock(net); diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 230b5aac9f03..8d7b113958b1 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -491,7 +491,7 @@ static void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info, local_bh_disable(); /* Check global sysctl_icmp_msgs_per_sec ratelimit */ - if (!icmpv6_global_allow(type)) + if (!(skb->dev->flags&IFF_LOOPBACK) && !icmpv6_global_allow(type)) goto out_bh_enable; mip6_addr_swap(skb); From fffd70f58864f5a48b2c17d02730a460f86d4254 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 14 Jun 2017 15:36:31 -0400 Subject: [PATCH 0825/1065] ufs: make ufs_freespace() return signed as it is, checking that its return value is <= 0 is useless and that's how it's being used. Signed-off-by: Al Viro --- fs/ufs/util.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ufs/util.h b/fs/ufs/util.h index 398019fb1448..1e1639f8a58b 100644 --- a/fs/ufs/util.h +++ b/fs/ufs/util.h @@ -354,12 +354,12 @@ static inline void *ubh_get_data_ptr(struct ufs_sb_private_info *uspi, * Determine the number of available frags given a * percentage to hold in reserve. */ -static inline u64 +static inline s64 ufs_freespace(struct ufs_sb_private_info *uspi, int percentreserved) { return ufs_blkstofrags(uspi->cs_total.cs_nbfree) + uspi->cs_total.cs_nffree - - (uspi->s_dsize * (percentreserved) / 100); + (uspi->s_dsize * percentreserved) / 100; } /* From b451cec4bbd913688f5381efad407762a64a92ce Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 14 Jun 2017 15:41:17 -0400 Subject: [PATCH 0826/1065] ufs: fix reserved blocks check a) honour ->s_minfree; don't just go with default (5) b) don't bother with capability checks until we know we'll need them Signed-off-by: Al Viro --- fs/ufs/balloc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c index d642cc0a8271..52d1ef415f6f 100644 --- a/fs/ufs/balloc.c +++ b/fs/ufs/balloc.c @@ -400,10 +400,12 @@ u64 ufs_new_fragments(struct inode *inode, void *p, u64 fragment, /* * There is not enough space for user on the device */ - if (!capable(CAP_SYS_RESOURCE) && ufs_freespace(uspi, UFS_MINFREE) <= 0) { - mutex_unlock(&UFS_SB(sb)->s_lock); - UFSD("EXIT (FAILED)\n"); - return 0; + if (unlikely(ufs_freespace(uspi, uspi->s_minfree) <= 0)) { + if (!capable(CAP_SYS_RESOURCE)) { + mutex_unlock(&UFS_SB(sb)->s_lock); + UFSD("EXIT (FAILED)\n"); + return 0; + } } if (goal >= uspi->s_size) From c596961d1b4ccc6f15754fe5a49c37ac6da57145 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 14 Jun 2017 16:36:29 -0400 Subject: [PATCH 0827/1065] ufs: fix s_size/s_dsize users For UFS2 we need 64bit variants; we even store them in uspi, but use 32bit ones instead. One wrinkle is in handling of reserved space - recalculating it every time had been stupid all along, but now it would become really ugly. Just calculate it once... Signed-off-by: Al Viro --- fs/ufs/balloc.c | 2 +- fs/ufs/super.c | 23 ++++++++++++----------- fs/ufs/ufs_fs.h | 7 +++---- fs/ufs/util.h | 11 +++-------- 4 files changed, 19 insertions(+), 24 deletions(-) diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c index 52d1ef415f6f..af0473a851af 100644 --- a/fs/ufs/balloc.c +++ b/fs/ufs/balloc.c @@ -400,7 +400,7 @@ u64 ufs_new_fragments(struct inode *inode, void *p, u64 fragment, /* * There is not enough space for user on the device */ - if (unlikely(ufs_freespace(uspi, uspi->s_minfree) <= 0)) { + if (unlikely(ufs_freefrags(uspi) <= uspi->s_root_blocks)) { if (!capable(CAP_SYS_RESOURCE)) { mutex_unlock(&UFS_SB(sb)->s_lock); UFSD("EXIT (FAILED)\n"); diff --git a/fs/ufs/super.c b/fs/ufs/super.c index eca838a8b43e..34656c7a8e22 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -1159,8 +1159,8 @@ magic_found: uspi->s_cgmask = fs32_to_cpu(sb, usb1->fs_cgmask); if ((flags & UFS_TYPE_MASK) == UFS_TYPE_UFS2) { - uspi->s_u2_size = fs64_to_cpu(sb, usb3->fs_un1.fs_u2.fs_size); - uspi->s_u2_dsize = fs64_to_cpu(sb, usb3->fs_un1.fs_u2.fs_dsize); + uspi->s_size = fs64_to_cpu(sb, usb3->fs_un1.fs_u2.fs_size); + uspi->s_dsize = fs64_to_cpu(sb, usb3->fs_un1.fs_u2.fs_dsize); } else { uspi->s_size = fs32_to_cpu(sb, usb1->fs_size); uspi->s_dsize = fs32_to_cpu(sb, usb1->fs_dsize); @@ -1209,6 +1209,9 @@ magic_found: uspi->s_postbloff = fs32_to_cpu(sb, usb3->fs_postbloff); uspi->s_rotbloff = fs32_to_cpu(sb, usb3->fs_rotbloff); + uspi->s_root_blocks = mul_u64_u32_div(uspi->s_dsize, + uspi->s_minfree, 100); + /* * Compute another frequently used values */ @@ -1398,19 +1401,17 @@ static int ufs_statfs(struct dentry *dentry, struct kstatfs *buf) mutex_lock(&UFS_SB(sb)->s_lock); usb3 = ubh_get_usb_third(uspi); - if ((flags & UFS_TYPE_MASK) == UFS_TYPE_UFS2) { + if ((flags & UFS_TYPE_MASK) == UFS_TYPE_UFS2) buf->f_type = UFS2_MAGIC; - buf->f_blocks = fs64_to_cpu(sb, usb3->fs_un1.fs_u2.fs_dsize); - } else { + else buf->f_type = UFS_MAGIC; - buf->f_blocks = uspi->s_dsize; - } - buf->f_bfree = ufs_blkstofrags(uspi->cs_total.cs_nbfree) + - uspi->cs_total.cs_nffree; + + buf->f_blocks = uspi->s_dsize; + buf->f_bfree = ufs_freefrags(uspi); buf->f_ffree = uspi->cs_total.cs_nifree; buf->f_bsize = sb->s_blocksize; - buf->f_bavail = (buf->f_bfree > (((long)buf->f_blocks / 100) * uspi->s_minfree)) - ? (buf->f_bfree - (((long)buf->f_blocks / 100) * uspi->s_minfree)) : 0; + buf->f_bavail = (buf->f_bfree > uspi->s_root_blocks) + ? (buf->f_bfree - uspi->s_root_blocks) : 0; buf->f_files = uspi->s_ncg * uspi->s_ipg; buf->f_namelen = UFS_MAXNAMLEN; buf->f_fsid.val[0] = (u32)id; diff --git a/fs/ufs/ufs_fs.h b/fs/ufs/ufs_fs.h index 0cbd5d340b67..823d55a37586 100644 --- a/fs/ufs/ufs_fs.h +++ b/fs/ufs/ufs_fs.h @@ -733,10 +733,8 @@ struct ufs_sb_private_info { __u32 s_dblkno; /* offset of first data after cg */ __u32 s_cgoffset; /* cylinder group offset in cylinder */ __u32 s_cgmask; /* used to calc mod fs_ntrak */ - __u32 s_size; /* number of blocks (fragments) in fs */ - __u32 s_dsize; /* number of data blocks in fs */ - __u64 s_u2_size; /* ufs2: number of blocks (fragments) in fs */ - __u64 s_u2_dsize; /*ufs2: number of data blocks in fs */ + __u64 s_size; /* number of blocks (fragments) in fs */ + __u64 s_dsize; /* number of data blocks in fs */ __u32 s_ncg; /* number of cylinder groups */ __u32 s_bsize; /* size of basic blocks */ __u32 s_fsize; /* size of fragments */ @@ -793,6 +791,7 @@ struct ufs_sb_private_info { __u32 s_maxsymlinklen;/* upper limit on fast symlinks' size */ __s32 fs_magic; /* filesystem magic */ unsigned int s_dirblksize; + __u64 s_root_blocks; }; /* diff --git a/fs/ufs/util.h b/fs/ufs/util.h index 1e1639f8a58b..9fc7119a1551 100644 --- a/fs/ufs/util.h +++ b/fs/ufs/util.h @@ -350,16 +350,11 @@ static inline void *ubh_get_data_ptr(struct ufs_sb_private_info *uspi, #define ubh_blkmap(ubh,begin,bit) \ ((*ubh_get_addr(ubh, (begin) + ((bit) >> 3)) >> ((bit) & 7)) & (0xff >> (UFS_MAXFRAG - uspi->s_fpb))) -/* - * Determine the number of available frags given a - * percentage to hold in reserve. - */ -static inline s64 -ufs_freespace(struct ufs_sb_private_info *uspi, int percentreserved) +static inline u64 +ufs_freefrags(struct ufs_sb_private_info *uspi) { return ufs_blkstofrags(uspi->cs_total.cs_nbfree) + - uspi->cs_total.cs_nffree - - (uspi->s_dsize * percentreserved) / 100; + uspi->cs_total.cs_nffree; } /* From 267309f394bf3cd8db001992890b1fa52b97974e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 14 Jun 2017 23:32:19 -0400 Subject: [PATCH 0828/1065] ufs_get_locked_page(): make sure we have buffer_heads callers rely upon that, but find_lock_page() racing with attempt of page eviction by memory pressure might have left us with * try_to_free_buffers() successfully done * __remove_mapping() failed, leaving the page in our mapping * find_lock_page() returning an uptodate page with no buffer_heads attached. Signed-off-by: Al Viro --- fs/ufs/util.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/fs/ufs/util.c b/fs/ufs/util.c index f41ad0a6106f..02497a492eb2 100644 --- a/fs/ufs/util.c +++ b/fs/ufs/util.c @@ -243,9 +243,8 @@ ufs_set_inode_dev(struct super_block *sb, struct ufs_inode_info *ufsi, dev_t dev struct page *ufs_get_locked_page(struct address_space *mapping, pgoff_t index) { - struct page *page; - - page = find_lock_page(mapping, index); + struct inode *inode = mapping->host; + struct page *page = find_lock_page(mapping, index); if (!page) { page = read_mapping_page(mapping, index, NULL); @@ -253,7 +252,7 @@ struct page *ufs_get_locked_page(struct address_space *mapping, printk(KERN_ERR "ufs_change_blocknr: " "read_mapping_page error: ino %lu, index: %lu\n", mapping->host->i_ino, index); - goto out; + return page; } lock_page(page); @@ -262,8 +261,7 @@ struct page *ufs_get_locked_page(struct address_space *mapping, /* Truncate got there first */ unlock_page(page); put_page(page); - page = NULL; - goto out; + return NULL; } if (!PageUptodate(page) || PageError(page)) { @@ -272,11 +270,12 @@ struct page *ufs_get_locked_page(struct address_space *mapping, printk(KERN_ERR "ufs_change_blocknr: " "can not read page: ino %lu, index: %lu\n", - mapping->host->i_ino, index); + inode->i_ino, index); - page = ERR_PTR(-EIO); + return ERR_PTR(-EIO); } } -out: + if (!page_has_buffers(page)) + create_empty_buffers(page, 1 << inode->i_blkbits, 0); return page; } From 640f93cc6ea7327588be3cc0849d1342aac0393a Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Wed, 14 Jun 2017 16:35:31 -0700 Subject: [PATCH 0829/1065] i40e: Fix a sleep-in-atomic bug The driver may sleep under a spin lock, and the function call path is: i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh) i40e_vsi_remove_pvid i40e_vlan_stripping_disable i40e_aq_update_vsi_params i40e_asq_send_command mutex_lock --> may sleep To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and the lock is acquired again after this function. Signed-off-by: Jia-Ju Bai Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 95c23fbaa211..0fb38ca78900 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -3017,10 +3017,12 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id, VLAN_VID_MASK)); } + spin_unlock_bh(&vsi->mac_filter_hash_lock); if (vlan_id || qos) ret = i40e_vsi_add_pvid(vsi, vlanprio); else i40e_vsi_remove_pvid(vsi); + spin_lock_bh(&vsi->mac_filter_hash_lock); if (vlan_id) { dev_info(&pf->pdev->dev, "Setting VLAN %d, QOS 0x%x on VF %d\n", From 09bf4f5b6e6013f0ad6b090d4a8deebd4e56d878 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Jun 2017 00:17:30 -0400 Subject: [PATCH 0830/1065] ufs: avoid grabbing ->truncate_mutex if possible tail unpacking is done in a wrong place; the deadlocks galore is best dealt with by doing that in ->write_iter() (and switching to iomap, while we are at it), but that's rather painful to backport. The trouble comes from grabbing pages that cover the beginning of tail from inside of ufs_new_fragments(); ongoing pageout of any of those is going to deadlock on ->truncate_mutex with process that got around to extending the tail holding that and waiting for page to get unlocked, while ->writepage() on that page is waiting on ->truncate_mutex. The thing is, we don't need ->truncate_mutex when the fragment we are trying to map is within the tail - the damn thing is allocated (tail can't contain holes). Let's do a plain lookup and if the fragment is present, we can just pretend that we'd won the race in almost all cases. The only exception is a fragment between the end of tail and the end of block containing tail. Protect ->i_lastfrag with ->meta_lock - read_seqlock_excl() is sufficient. Signed-off-by: Al Viro --- fs/ufs/balloc.c | 10 ++++++---- fs/ufs/inode.c | 26 ++++++++++++++++++++------ 2 files changed, 26 insertions(+), 10 deletions(-) diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c index af0473a851af..d56d9bc705fe 100644 --- a/fs/ufs/balloc.c +++ b/fs/ufs/balloc.c @@ -423,12 +423,12 @@ u64 ufs_new_fragments(struct inode *inode, void *p, u64 fragment, if (result) { ufs_clear_frags(inode, result + oldcount, newcount - oldcount, locked_page != NULL); + *err = 0; write_seqlock(&UFS_I(inode)->meta_lock); ufs_cpu_to_data_ptr(sb, p, result); - write_sequnlock(&UFS_I(inode)->meta_lock); - *err = 0; UFS_I(inode)->i_lastfrag = max(UFS_I(inode)->i_lastfrag, fragment + count); + write_sequnlock(&UFS_I(inode)->meta_lock); } mutex_unlock(&UFS_SB(sb)->s_lock); UFSD("EXIT, result %llu\n", (unsigned long long)result); @@ -441,8 +441,10 @@ u64 ufs_new_fragments(struct inode *inode, void *p, u64 fragment, result = ufs_add_fragments(inode, tmp, oldcount, newcount); if (result) { *err = 0; + read_seqlock_excl(&UFS_I(inode)->meta_lock); UFS_I(inode)->i_lastfrag = max(UFS_I(inode)->i_lastfrag, fragment + count); + read_sequnlock_excl(&UFS_I(inode)->meta_lock); ufs_clear_frags(inode, result + oldcount, newcount - oldcount, locked_page != NULL); mutex_unlock(&UFS_SB(sb)->s_lock); @@ -479,12 +481,12 @@ u64 ufs_new_fragments(struct inode *inode, void *p, u64 fragment, ufs_change_blocknr(inode, fragment - oldcount, oldcount, uspi->s_sbbase + tmp, uspi->s_sbbase + result, locked_page); + *err = 0; write_seqlock(&UFS_I(inode)->meta_lock); ufs_cpu_to_data_ptr(sb, p, result); - write_sequnlock(&UFS_I(inode)->meta_lock); - *err = 0; UFS_I(inode)->i_lastfrag = max(UFS_I(inode)->i_lastfrag, fragment + count); + write_sequnlock(&UFS_I(inode)->meta_lock); mutex_unlock(&UFS_SB(sb)->s_lock); if (newcount < request) ufs_free_fragments (inode, result + newcount, request - newcount); diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index da553ffec85b..1dda6c4875f9 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -401,13 +401,20 @@ static int ufs_getfrag_block(struct inode *inode, sector_t fragment, struct buff u64 phys64 = 0; unsigned frag = fragment & uspi->s_fpbmask; - if (!create) { - phys64 = ufs_frag_map(inode, offsets, depth); - if (phys64) - map_bh(bh_result, sb, phys64 + frag); - return 0; - } + phys64 = ufs_frag_map(inode, offsets, depth); + if (!create) + goto done; + if (phys64) { + if (fragment >= UFS_NDIR_FRAGMENT) + goto done; + read_seqlock_excl(&UFS_I(inode)->meta_lock); + if (fragment < UFS_I(inode)->i_lastfrag) { + read_sequnlock_excl(&UFS_I(inode)->meta_lock); + goto done; + } + read_sequnlock_excl(&UFS_I(inode)->meta_lock); + } /* This code entered only while writing ....? */ mutex_lock(&UFS_I(inode)->truncate_mutex); @@ -451,6 +458,11 @@ out: } mutex_unlock(&UFS_I(inode)->truncate_mutex); return err; + +done: + if (phys64) + map_bh(bh_result, sb, phys64 + frag); + return 0; } static int ufs_writepage(struct page *page, struct writeback_control *wbc) @@ -1161,7 +1173,9 @@ static void ufs_truncate_blocks(struct inode *inode) free_full_branch(inode, block, i - UFS_IND_BLOCK + 1); } } + read_seqlock_excl(&ufsi->meta_lock); ufsi->i_lastfrag = DIRECT_FRAGMENT; + read_sequnlock_excl(&ufsi->meta_lock); mark_inode_dirty(inode); mutex_unlock(&ufsi->truncate_mutex); } From 289dec5b895a7ecefb2f49da109e6aed9b0f1754 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Jun 2017 00:42:56 -0400 Subject: [PATCH 0831/1065] ufs: more deadlock prevention on tail unpacking ->s_lock is not needed for ufs_change_blocknr() Signed-off-by: Al Viro --- fs/ufs/balloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c index d56d9bc705fe..0315fea1d589 100644 --- a/fs/ufs/balloc.c +++ b/fs/ufs/balloc.c @@ -478,6 +478,7 @@ u64 ufs_new_fragments(struct inode *inode, void *p, u64 fragment, if (result) { ufs_clear_frags(inode, result + oldcount, newcount - oldcount, locked_page != NULL); + mutex_unlock(&UFS_SB(sb)->s_lock); ufs_change_blocknr(inode, fragment - oldcount, oldcount, uspi->s_sbbase + tmp, uspi->s_sbbase + result, locked_page); @@ -487,7 +488,6 @@ u64 ufs_new_fragments(struct inode *inode, void *p, u64 fragment, UFS_I(inode)->i_lastfrag = max(UFS_I(inode)->i_lastfrag, fragment + count); write_sequnlock(&UFS_I(inode)->meta_lock); - mutex_unlock(&UFS_SB(sb)->s_lock); if (newcount < request) ufs_free_fragments (inode, result + newcount, request - newcount); ufs_free_fragments (inode, tmp, oldcount); From 4c3bb4ccd074e1a0552078c0bf94c662367a1658 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 15 Jun 2017 15:43:17 +1000 Subject: [PATCH 0832/1065] KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit This restores several special-purpose registers (SPRs) to sane values on guest exit that were missed before. TAR and VRSAVE are readable and writable by userspace, and we need to save and restore them to prevent the guest from potentially affecting userspace execution (not that TAR or VRSAVE are used by any known program that run uses the KVM_RUN ioctl). We save/restore these in kvmppc_vcpu_run_hv() rather than on every guest entry/exit. FSCR affects userspace execution in that it can prohibit access to certain facilities by userspace. We restore it to the normal value for the task on exit from the KVM_RUN ioctl. IAMR is normally 0, and is restored to 0 on guest exit. However, with a radix host on POWER9, it is set to a value that prevents the kernel from executing user-accessible memory. On POWER9, we save IAMR on guest entry and restore it on guest exit to the saved value rather than 0. On POWER8 we continue to set it to 0 on guest exit. PSPB is normally 0. We restore it to 0 on guest exit to prevent userspace taking advantage of the guest having set it non-zero (which would allow userspace to set its SMT priority to high). UAMOR is normally 0. We restore it to 0 on guest exit to prevent the AMR from being used as a covert channel between userspace processes, since the AMR is not context-switched at present. Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_hv.c | 11 +++++++++-- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 9 ++++++++- 2 files changed, 17 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 400a5992b121..a963762a031f 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -2908,6 +2908,8 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu) int r; int srcu_idx; unsigned long ebb_regs[3] = {}; /* shut up GCC */ + unsigned long user_tar = 0; + unsigned int user_vrsave; if (!vcpu->arch.sane) { run->exit_reason = KVM_EXIT_INTERNAL_ERROR; @@ -2935,12 +2937,14 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu) flush_all_to_thread(current); - /* Save userspace EBB register values */ + /* Save userspace EBB and other register values */ if (cpu_has_feature(CPU_FTR_ARCH_207S)) { ebb_regs[0] = mfspr(SPRN_EBBHR); ebb_regs[1] = mfspr(SPRN_EBBRR); ebb_regs[2] = mfspr(SPRN_BESCR); + user_tar = mfspr(SPRN_TAR); } + user_vrsave = mfspr(SPRN_VRSAVE); vcpu->arch.wqp = &vcpu->arch.vcore->wq; vcpu->arch.pgdir = current->mm->pgd; @@ -2968,12 +2972,15 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu) } } while (is_kvmppc_resume_guest(r)); - /* Restore userspace EBB register values */ + /* Restore userspace EBB and other register values */ if (cpu_has_feature(CPU_FTR_ARCH_207S)) { mtspr(SPRN_EBBHR, ebb_regs[0]); mtspr(SPRN_EBBRR, ebb_regs[1]); mtspr(SPRN_BESCR, ebb_regs[2]); + mtspr(SPRN_TAR, user_tar); + mtspr(SPRN_FSCR, current->thread.fscr); } + mtspr(SPRN_VRSAVE, user_vrsave); out: vcpu->arch.state = KVMPPC_VCPU_NOTREADY; diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index e390b383b4d6..4e4390564276 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -558,6 +558,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #define STACK_SLOT_TID (112-16) #define STACK_SLOT_PSSCR (112-24) #define STACK_SLOT_PID (112-32) +#define STACK_SLOT_IAMR (112-40) .global kvmppc_hv_entry kvmppc_hv_entry: @@ -758,9 +759,11 @@ BEGIN_FTR_SECTION mfspr r5, SPRN_TIDR mfspr r6, SPRN_PSSCR mfspr r7, SPRN_PID + mfspr r8, SPRN_IAMR std r5, STACK_SLOT_TID(r1) std r6, STACK_SLOT_PSSCR(r1) std r7, STACK_SLOT_PID(r1) + std r8, STACK_SLOT_IAMR(r1) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) BEGIN_FTR_SECTION @@ -1515,11 +1518,12 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300) * set by the guest could disrupt the host. */ li r0, 0 - mtspr SPRN_IAMR, r0 mtspr SPRN_CIABR, r0 mtspr SPRN_DAWRX, r0 + mtspr SPRN_PSPB, r0 mtspr SPRN_WORT, r0 BEGIN_FTR_SECTION + mtspr SPRN_IAMR, r0 mtspr SPRN_TCSCR, r0 /* Set MMCRS to 1<<31 to freeze and disable the SPMC counters */ li r0, 1 @@ -1535,6 +1539,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) std r6,VCPU_UAMOR(r9) li r6,0 mtspr SPRN_AMR,r6 + mtspr SPRN_UAMOR, r6 /* Switch DSCR back to host value */ mfspr r8, SPRN_DSCR @@ -1683,9 +1688,11 @@ BEGIN_FTR_SECTION ld r5, STACK_SLOT_TID(r1) ld r6, STACK_SLOT_PSSCR(r1) ld r7, STACK_SLOT_PID(r1) + ld r8, STACK_SLOT_IAMR(r1) mtspr SPRN_TIDR, r5 mtspr SPRN_PSSCR, r6 mtspr SPRN_PID, r7 + mtspr SPRN_IAMR, r8 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) BEGIN_FTR_SECTION PPC_INVALIDATE_ERAT From 46a704f8409f79fd66567ad3f8a7304830a84293 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 15 Jun 2017 16:10:27 +1000 Subject: [PATCH 0833/1065] KVM: PPC: Book3S HV: Preserve userspace HTM state properly If userspace attempts to call the KVM_RUN ioctl when it has hardware transactional memory (HTM) enabled, the values that it has put in the HTM-related SPRs TFHAR, TFIAR and TEXASR will get overwritten by guest values. To fix this, we detect this condition and save those SPR values in the thread struct, and disable HTM for the task. If userspace goes to access those SPRs or the HTM facility in future, a TM-unavailable interrupt will occur and the handler will reload those SPRs and re-enable HTM. If userspace has started a transaction and suspended it, we would currently lose the transactional state in the guest entry path and would almost certainly get a "TM Bad Thing" interrupt, which would cause the host to crash. To avoid this, we detect this case and return from the KVM_RUN ioctl with an EINVAL error, with the KVM exit reason set to KVM_EXIT_FAIL_ENTRY. Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_hv.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index a963762a031f..fd4d978d5257 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -2916,6 +2916,27 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu) return -EINVAL; } + /* + * Don't allow entry with a suspended transaction, because + * the guest entry/exit code will lose it. + * If the guest has TM enabled, save away their TM-related SPRs + * (they will get restored by the TM unavailable interrupt). + */ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (cpu_has_feature(CPU_FTR_TM) && current->thread.regs && + (current->thread.regs->msr & MSR_TM)) { + if (MSR_TM_ACTIVE(current->thread.regs->msr)) { + run->exit_reason = KVM_EXIT_FAIL_ENTRY; + run->fail_entry.hardware_entry_failure_reason = 0; + return -EINVAL; + } + current->thread.tm_tfhar = mfspr(SPRN_TFHAR); + current->thread.tm_tfiar = mfspr(SPRN_TFIAR); + current->thread.tm_texasr = mfspr(SPRN_TEXASR); + current->thread.regs->msr &= ~MSR_TM; + } +#endif + kvmppc_core_prepare_to_enter(vcpu); /* No need to go into the guest when all we'll do is come back out */ From a8fad984833832d5ca11a9ed64ddc55646da30e3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Jun 2017 03:57:46 -0400 Subject: [PATCH 0834/1065] ufs_truncate_blocks(): fix the case when size is in the last direct block The logics when deciding whether we need to do anything with direct blocks is broken when new size is within the last direct block. It's better to find the path to the last byte _not_ to be removed and use that instead of the path to the beginning of the first block to be freed... Signed-off-by: Al Viro --- fs/ufs/inode.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index 1dda6c4875f9..9f4590261134 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -886,7 +886,6 @@ static inline void free_data(struct to_free *ctx, u64 from, unsigned count) ctx->to = from + count; } -#define DIRECT_BLOCK ((inode->i_size + uspi->s_bsize - 1) >> uspi->s_bshift) #define DIRECT_FRAGMENT ((inode->i_size + uspi->s_fsize - 1) >> uspi->s_fshift) static void ufs_trunc_direct(struct inode *inode) @@ -1124,19 +1123,24 @@ static void ufs_truncate_blocks(struct inode *inode) struct super_block *sb = inode->i_sb; struct ufs_sb_private_info *uspi = UFS_SB(sb)->s_uspi; unsigned offsets[4]; - int depth = ufs_block_to_path(inode, DIRECT_BLOCK, offsets); + int depth; int depth2; unsigned i; struct ufs_buffer_head *ubh[3]; void *p; u64 block; - if (!depth) - return; + if (inode->i_size) { + sector_t last = (inode->i_size - 1) >> uspi->s_bshift; + depth = ufs_block_to_path(inode, last, offsets); + if (!depth) + return; + } else { + depth = 1; + } - /* find the last non-zero in offsets[] */ for (depth2 = depth - 1; depth2; depth2--) - if (offsets[depth2]) + if (offsets[depth2] != uspi->s_apb - 1) break; mutex_lock(&ufsi->truncate_mutex); @@ -1145,9 +1149,8 @@ static void ufs_truncate_blocks(struct inode *inode) offsets[0] = UFS_IND_BLOCK; } else { /* get the blocks that should be partially emptied */ - p = ufs_get_direct_data_ptr(uspi, ufsi, offsets[0]); + p = ufs_get_direct_data_ptr(uspi, ufsi, offsets[0]++); for (i = 0; i < depth2; i++) { - offsets[i]++; /* next branch is fully freed */ block = ufs_data_ptr_to_cpu(sb, p); if (!block) break; @@ -1158,7 +1161,7 @@ static void ufs_truncate_blocks(struct inode *inode) write_sequnlock(&ufsi->meta_lock); break; } - p = ubh_get_data_ptr(uspi, ubh[i], offsets[i + 1]); + p = ubh_get_data_ptr(uspi, ubh[i], offsets[i + 1]++); } while (i--) free_branch_tail(inode, offsets[i + 1], ubh[i], depth - i - 1); From 1a73d9310e093fc3adffba4d0a67b9fab2ee3f63 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 2 Jun 2017 11:35:01 -0700 Subject: [PATCH 0835/1065] MIPS: Fix bnezc/jialc return address calculation The code handling the pop76 opcode (ie. bnezc & jialc instructions) in __compute_return_epc_for_insn() needs to set the value of $31 in the jialc case, which is encoded with rs = 0. However its check to differentiate bnezc (rs != 0) from jialc (rs = 0) was unfortunately backwards, meaning that if we emulate a bnezc instruction we clobber $31 & if we emulate a jialc instruction it actually behaves like a jic instruction. Fix this by inverting the check of rs to match the way the instructions are actually encoded. Signed-off-by: Paul Burton Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Cc: stable # v4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16178/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/branch.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index b11facd11c9d..f702a459a830 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -804,8 +804,10 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, break; } /* Compact branch: BNEZC || JIALC */ - if (insn.i_format.rs) + if (!insn.i_format.rs) { + /* JIALC: set $31/ra */ regs->regs[31] = epc + 4; + } regs->cp0_epc += 8; break; #endif From bcd7c45e0d5a82be9a64b90050f0e09d41a50758 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 2 Jun 2017 12:02:08 -0700 Subject: [PATCH 0836/1065] MIPS: .its targets depend on vmlinux The .its targets require information about the kernel binary, such as its entry point, which is extracted from the vmlinux ELF. We therefore require that the ELF is built before the .its files are generated. Declare this requirement in the Makefile such that make will ensure this is always the case, otherwise in corner cases we can hit issues as the .its is generated with an incorrect (either invalid or stale) entry point. Signed-off-by: Paul Burton Fixes: cf2a5e0bb4c6 ("MIPS: Support generating Flattened Image Trees (.itb)") Cc: linux-mips@linux-mips.org Cc: stable # v4.9+ Patchwork: https://patchwork.linux-mips.org/patch/16179/ Signed-off-by: Ralf Baechle --- arch/mips/boot/Makefile | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile index 2728a9a9c7c5..145b5ce8eb7e 100644 --- a/arch/mips/boot/Makefile +++ b/arch/mips/boot/Makefile @@ -128,19 +128,19 @@ quiet_cmd_cpp_its_S = ITS $@ -DADDR_BITS=$(ADDR_BITS) \ -DADDR_CELLS=$(itb_addr_cells) -$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE +$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE $(call if_changed_dep,cpp_its_S,none,vmlinux.bin) -$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE +$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE $(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz) -$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE +$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE $(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2) -$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE +$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE $(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma) -$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE +$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE $(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo) quiet_cmd_itb-image = ITB $@ From 81be24d263dbeddaba35827036d6f6787a59c2c3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 3 Jun 2017 07:20:09 +0100 Subject: [PATCH 0837/1065] Hang/soft lockup in d_invalidate with simultaneous calls It's not hard to trigger a bunch of d_invalidate() on the same dentry in parallel. They end up fighting each other - any dentry picked for removal by one will be skipped by the rest and we'll go for the next iteration through the entire subtree, even if everything is being skipped. Morevoer, we immediately go back to scanning the subtree. The only thing we really need is to dissolve all mounts in the subtree and as soon as we've nothing left to do, we can just unhash the dentry and bugger off. Signed-off-by: Al Viro --- fs/dcache.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index cddf39777835..a9f995f6859e 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1494,7 +1494,7 @@ static void check_and_drop(void *_data) { struct detach_data *data = _data; - if (!data->mountpoint && !data->select.found) + if (!data->mountpoint && list_empty(&data->select.dispose)) __d_drop(data->select.start); } @@ -1536,17 +1536,15 @@ void d_invalidate(struct dentry *dentry) d_walk(dentry, &data, detach_and_collect, check_and_drop); - if (data.select.found) + if (!list_empty(&data.select.dispose)) shrink_dentry_list(&data.select.dispose); + else if (!data.mountpoint) + return; if (data.mountpoint) { detach_mounts(data.mountpoint); dput(data.mountpoint); } - - if (!data.mountpoint && !data.select.found) - break; - cond_resched(); } } From 4068367c9ca7b515a209f9c0c8741309a1e90495 Mon Sep 17 00:00:00 2001 From: Andrei Vagin Date: Thu, 8 Jun 2017 17:32:29 -0700 Subject: [PATCH 0838/1065] fs: don't forget to put old mntns in mntns_install Fixes: 4f757f3cbf54 ("make sure that mntns_install() doesn't end up with referral for root") Cc: Al Viro Signed-off-by: Andrei Vagin Signed-off-by: Al Viro --- fs/namespace.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/namespace.c b/fs/namespace.c index 8bd3e4d448b9..5a4438445bf7 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -3488,6 +3488,8 @@ static int mntns_install(struct nsproxy *nsproxy, struct ns_common *ns) return err; } + put_mnt_ns(old_mnt_ns); + /* Update the pwd and root */ set_fs_pwd(fs, &root); set_fs_root(fs, &root); From c9aba14362a6eec583819ec8f4b872c1816f5cbe Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 15 Jun 2017 13:46:00 +0200 Subject: [PATCH 0839/1065] firmware: dmi_scan: Look for SMBIOS 3 entry point first Since version 3.0.0 of the SMBIOS specification, there can be multiple entry points in memory, pointing to one or two DMI tables. If both a 32-bit ("_SM_") entry point and a 64-bit ("_SM3_") entry point are present, the specification requires that the latter points to a table which is a super-set of the table pointed to by the former. Therefore we should give preference to the 64-bit ("_SM3_") entry point. However, currently the code is picking the first valid entry point it finds. Per specification, we should look for a 64-bit ("_SM3_") entry point first, and if we can't find any, look for a 32-bit ("_SM_" or "_DMI_") entry point. Modify the code to do that. Signed-off-by: Jean Delvare --- drivers/firmware/dmi_scan.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 93f7acdaac7a..82ee042f075c 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -649,6 +649,21 @@ void __init dmi_scan_machine(void) if (p == NULL) goto error; + /* + * Same logic as above, look for a 64-bit entry point + * first, and if not found, fall back to 32-bit entry point. + */ + memcpy_fromio(buf, p, 16); + for (q = p + 16; q < p + 0x10000; q += 16) { + memcpy_fromio(buf + 16, q, 16); + if (!dmi_smbios3_present(buf)) { + dmi_available = 1; + dmi_early_unmap(p, 0x10000); + goto out; + } + memcpy(buf, buf + 16, 16); + } + /* * Iterate over all possible DMI header addresses q. * Maintain the 32 bytes around q in buf. On the @@ -659,7 +674,7 @@ void __init dmi_scan_machine(void) memset(buf, 0, 16); for (q = p; q < p + 0x10000; q += 16) { memcpy_fromio(buf + 16, q, 16); - if (!dmi_smbios3_present(buf) || !dmi_present(buf)) { + if (!dmi_present(buf)) { dmi_available = 1; dmi_early_unmap(p, 0x10000); goto out; From c926820085437a27b27e78996b2c7a5ad94e8055 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Thu, 15 Jun 2017 13:46:00 +0200 Subject: [PATCH 0840/1065] firmware: dmi_scan: Make dmi_walk and dmi_walk_early return real error codes Currently they return -1 on error, which will confuse callers if they try to interpret it as a normal negative error code. Signed-off-by: Andy Lutomirski Signed-off-by: Darren Hart (VMware) Signed-off-by: Jean Delvare --- drivers/firmware/dmi_scan.c | 9 +++++---- include/linux/dmi.h | 2 +- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 82ee042f075c..fc30249132f5 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -144,7 +144,7 @@ static int __init dmi_walk_early(void (*decode)(const struct dmi_header *, buf = dmi_early_remap(dmi_base, orig_dmi_len); if (buf == NULL) - return -1; + return -ENOMEM; dmi_decode_table(buf, decode, NULL); @@ -1008,7 +1008,8 @@ EXPORT_SYMBOL(dmi_get_date); * @decode: Callback function * @private_data: Private data to be passed to the callback function * - * Returns -1 when the DMI table can't be reached, 0 on success. + * Returns 0 on success, -ENXIO if DMI is not selected or not present, + * or a different negative error code if DMI walking fails. */ int dmi_walk(void (*decode)(const struct dmi_header *, void *), void *private_data) @@ -1016,11 +1017,11 @@ int dmi_walk(void (*decode)(const struct dmi_header *, void *), u8 *buf; if (!dmi_available) - return -1; + return -ENXIO; buf = dmi_remap(dmi_base, dmi_len); if (buf == NULL) - return -1; + return -ENOMEM; dmi_decode_table(buf, decode, private_data); diff --git a/include/linux/dmi.h b/include/linux/dmi.h index 5e9c74cf8894..9bbf21a516e4 100644 --- a/include/linux/dmi.h +++ b/include/linux/dmi.h @@ -136,7 +136,7 @@ static inline int dmi_name_in_vendors(const char *s) { return 0; } static inline int dmi_name_in_serial(const char *s) { return 0; } #define dmi_available 0 static inline int dmi_walk(void (*decode)(const struct dmi_header *, void *), - void *private_data) { return -1; } + void *private_data) { return -ENXIO; } static inline bool dmi_match(enum dmi_field f, const char *str) { return false; } static inline void dmi_memdev_name(u16 handle, const char **bank, From e0733e975385d25d88c1384dafb8ea4dcf7513c0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 15 Jun 2017 13:46:01 +0200 Subject: [PATCH 0841/1065] firmware: dmi: Fix permissions of product_family This is not sensitive information like serial numbers, we can allow all users to read it. Fix odd alignment while we're here. Signed-off-by: Jean Delvare Fixes: c61872c9833d ("firmware: dmi: Add DMI_PRODUCT_FAMILY identification string") Reviewed-by: Andy Shevchenko Reviewed-by: Mika Westerberg Cc: Dmitry Torokhov Cc: Linus Walleij --- drivers/firmware/dmi-id.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c index dc269cb288c2..951b6c79f166 100644 --- a/drivers/firmware/dmi-id.c +++ b/drivers/firmware/dmi-id.c @@ -47,7 +47,7 @@ DEFINE_DMI_ATTR_WITH_SHOW(product_name, 0444, DMI_PRODUCT_NAME); DEFINE_DMI_ATTR_WITH_SHOW(product_version, 0444, DMI_PRODUCT_VERSION); DEFINE_DMI_ATTR_WITH_SHOW(product_serial, 0400, DMI_PRODUCT_SERIAL); DEFINE_DMI_ATTR_WITH_SHOW(product_uuid, 0400, DMI_PRODUCT_UUID); -DEFINE_DMI_ATTR_WITH_SHOW(product_family, 0400, DMI_PRODUCT_FAMILY); +DEFINE_DMI_ATTR_WITH_SHOW(product_family, 0444, DMI_PRODUCT_FAMILY); DEFINE_DMI_ATTR_WITH_SHOW(board_vendor, 0444, DMI_BOARD_VENDOR); DEFINE_DMI_ATTR_WITH_SHOW(board_name, 0444, DMI_BOARD_NAME); DEFINE_DMI_ATTR_WITH_SHOW(board_version, 0444, DMI_BOARD_VERSION); @@ -192,7 +192,7 @@ static void __init dmi_id_init_attr_table(void) ADD_DMI_ATTR(product_version, DMI_PRODUCT_VERSION); ADD_DMI_ATTR(product_serial, DMI_PRODUCT_SERIAL); ADD_DMI_ATTR(product_uuid, DMI_PRODUCT_UUID); - ADD_DMI_ATTR(product_family, DMI_PRODUCT_FAMILY); + ADD_DMI_ATTR(product_family, DMI_PRODUCT_FAMILY); ADD_DMI_ATTR(board_vendor, DMI_BOARD_VENDOR); ADD_DMI_ATTR(board_name, DMI_BOARD_NAME); ADD_DMI_ATTR(board_version, DMI_BOARD_VERSION); From a814c3597a6b6040e2ef9459748081a6d5b7312d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 15 Jun 2017 13:46:01 +0200 Subject: [PATCH 0842/1065] firmware: dmi_scan: Check DMI structure length Before accessing DMI data to record it for later, we should ensure that the DMI structures are large enough to contain the data in question. Signed-off-by: Jean Delvare Reviewed-by: Mika Westerberg Cc: Dmitry Torokhov Cc: Andy Shevchenko Cc: Linus Walleij --- drivers/firmware/dmi_scan.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index fc30249132f5..783041964439 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -178,7 +178,7 @@ static void __init dmi_save_ident(const struct dmi_header *dm, int slot, const char *d = (const char *) dm; const char *p; - if (dmi_ident[slot]) + if (dmi_ident[slot] || dm->length <= string) return; p = dmi_string(dm, d[string]); @@ -191,13 +191,14 @@ static void __init dmi_save_ident(const struct dmi_header *dm, int slot, static void __init dmi_save_uuid(const struct dmi_header *dm, int slot, int index) { - const u8 *d = (u8 *) dm + index; + const u8 *d; char *s; int is_ff = 1, is_00 = 1, i; - if (dmi_ident[slot]) + if (dmi_ident[slot] || dm->length <= index + 16) return; + d = (u8 *) dm + index; for (i = 0; i < 16 && (is_ff || is_00); i++) { if (d[i] != 0x00) is_00 = 0; @@ -228,16 +229,17 @@ static void __init dmi_save_uuid(const struct dmi_header *dm, int slot, static void __init dmi_save_type(const struct dmi_header *dm, int slot, int index) { - const u8 *d = (u8 *) dm + index; + const u8 *d; char *s; - if (dmi_ident[slot]) + if (dmi_ident[slot] || dm->length <= index) return; s = dmi_alloc(4); if (!s) return; + d = (u8 *) dm + index; sprintf(s, "%u", *d & 0x7F); dmi_ident[slot] = s; } @@ -278,9 +280,13 @@ static void __init dmi_save_devices(const struct dmi_header *dm) static void __init dmi_save_oem_strings_devices(const struct dmi_header *dm) { - int i, count = *(u8 *)(dm + 1); + int i, count; struct dmi_device *dev; + if (dm->length < 0x05) + return; + + count = *(u8 *)(dm + 1); for (i = 1; i <= count; i++) { const char *devname = dmi_string(dm, i); @@ -353,6 +359,9 @@ static void __init dmi_save_extended_devices(const struct dmi_header *dm) const char *name; const u8 *d = (u8 *)dm; + if (dm->length < 0x0B) + return; + /* Skip disabled device */ if ((d[0x5] & 0x80) == 0) return; @@ -387,7 +396,7 @@ static void __init save_mem_devices(const struct dmi_header *dm, void *v) const char *d = (const char *)dm; static int nr; - if (dm->type != DMI_ENTRY_MEM_DEVICE) + if (dm->type != DMI_ENTRY_MEM_DEVICE || dm->length < 0x12) return; if (nr >= dmi_memdev_nr) { pr_warn(FW_BUG "Too many DIMM entries in SMBIOS table\n"); From 59e04bc20de4bd1bd5bfa810bf04a4e50a27b9c1 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 10 Apr 2017 22:29:22 +0200 Subject: [PATCH 0843/1065] gpu: host1x: Fix error handling If 'devm_reset_control_get' returns an error, then we erroneously return success because error code is taken from 'host->clk' instead of 'host->rst'. Fixes: b386c6b73ac6 ("gpu: host1x: Support module reset") Signed-off-by: Christophe JAILLET Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding Link: http://patchwork.freedesktop.org/patch/msgid/20170410202922.17665-1-christophe.jaillet@wanadoo.fr --- drivers/gpu/host1x/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c index f05ebb14fa63..ac65f52850a6 100644 --- a/drivers/gpu/host1x/dev.c +++ b/drivers/gpu/host1x/dev.c @@ -172,7 +172,7 @@ static int host1x_probe(struct platform_device *pdev) host->rst = devm_reset_control_get(&pdev->dev, "host1x"); if (IS_ERR(host->rst)) { - err = PTR_ERR(host->clk); + err = PTR_ERR(host->rst); dev_err(&pdev->dev, "failed to get reset: %d\n", err); return err; } From 1066a8959d04785b9d2e9cbb91aaef922b710c4a Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Thu, 15 Jun 2017 02:18:24 +0300 Subject: [PATCH 0844/1065] drm/tegra: Fix lockup on a use of staging API Commit bdd2f9cd10eb ("Don't leak kernel pointer to userspace") added a mutex around staging IOCTL's, some of those mutexes are taken twice. Fixes: bdd2f9cd10eb ("drm/tegra: Don't leak kernel pointer to userspace") Signed-off-by: Dmitry Osipenko Reviewed-by: Mikko Perttunen Reviewed-by: Erik Faye-Lund Signed-off-by: Thierry Reding Link: http://patchwork.freedesktop.org/patch/msgid/7b70a506a9d2355ea6ff19a8c4f4d726b67719b3.1497480754.git.digetx@gmail.com --- drivers/gpu/drm/tegra/drm.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 9a1e34e48f64..fefa715c4315 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -451,18 +451,6 @@ fail: #ifdef CONFIG_DRM_TEGRA_STAGING -static struct tegra_drm_context * -tegra_drm_file_get_context(struct tegra_drm_file *file, u32 id) -{ - struct tegra_drm_context *context; - - mutex_lock(&file->lock); - context = idr_find(&file->contexts, id); - mutex_unlock(&file->lock); - - return context; -} - static int tegra_gem_create(struct drm_device *drm, void *data, struct drm_file *file) { @@ -606,7 +594,7 @@ static int tegra_close_channel(struct drm_device *drm, void *data, mutex_lock(&fpriv->lock); - context = tegra_drm_file_get_context(fpriv, args->context); + context = idr_find(&fpriv->contexts, args->context); if (!context) { err = -EINVAL; goto unlock; @@ -631,7 +619,7 @@ static int tegra_get_syncpt(struct drm_device *drm, void *data, mutex_lock(&fpriv->lock); - context = tegra_drm_file_get_context(fpriv, args->context); + context = idr_find(&fpriv->contexts, args->context); if (!context) { err = -ENODEV; goto unlock; @@ -660,7 +648,7 @@ static int tegra_submit(struct drm_device *drm, void *data, mutex_lock(&fpriv->lock); - context = tegra_drm_file_get_context(fpriv, args->context); + context = idr_find(&fpriv->contexts, args->context); if (!context) { err = -ENODEV; goto unlock; @@ -685,7 +673,7 @@ static int tegra_get_syncpt_base(struct drm_device *drm, void *data, mutex_lock(&fpriv->lock); - context = tegra_drm_file_get_context(fpriv, args->context); + context = idr_find(&fpriv->contexts, args->context); if (!context) { err = -ENODEV; goto unlock; From d6c153ec85856f5ad29adc20739ec28edeb7c042 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Thu, 15 Jun 2017 02:18:25 +0300 Subject: [PATCH 0845/1065] drm/tegra: Correct idr_alloc() minimum id The client ID 0 is reserved by the host1x/cdma to mark the timeout timer work as already been scheduled and context ID is used as the clients one. This fixes spurious CDMA timeouts. Fixes: bdd2f9cd10eb ("drm/tegra: Don't leak kernel pointer to userspace") Signed-off-by: Dmitry Osipenko Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding Link: http://patchwork.freedesktop.org/patch/msgid/9c19a44219acd988e678cf9abe21363911184625.1497480754.git.digetx@gmail.com --- drivers/gpu/drm/tegra/drm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index fefa715c4315..81f86a67c10d 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -539,7 +539,7 @@ static int tegra_client_open(struct tegra_drm_file *fpriv, if (err < 0) return err; - err = idr_alloc(&fpriv->contexts, context, 0, 0, GFP_KERNEL); + err = idr_alloc(&fpriv->contexts, context, 1, 0, GFP_KERNEL); if (err < 0) { client->ops->close_channel(context); return err; From cd15fb64ee56192760ad5c1e2ad97a65e735b18b Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 15 Jun 2017 08:39:15 -0400 Subject: [PATCH 0846/1065] Revert "dm mirror: use all available legs on multiple failures" This reverts commit 12a7cf5ba6c776a2621d8972c7d42e8d3d959d20. This commit apparently attempted to fix an issue that didn't really exist, furthermore: this commit is the source of deadlocks and crashes seen in multiple cases related to failing the primary mirror dev while syncing. Reported-by: Jonathan Brassow Signed-off-by: Mike Snitzer --- drivers/md/dm-raid1.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index e61c45047c25..4da8858856fb 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -145,6 +145,7 @@ static void dispatch_bios(void *context, struct bio_list *bio_list) struct dm_raid1_bio_record { struct mirror *m; + /* if details->bi_bdev == NULL, details were not saved */ struct dm_bio_details details; region_t write_region; }; @@ -1198,6 +1199,8 @@ static int mirror_map(struct dm_target *ti, struct bio *bio) struct dm_raid1_bio_record *bio_record = dm_per_bio_data(bio, sizeof(struct dm_raid1_bio_record)); + bio_record->details.bi_bdev = NULL; + if (rw == WRITE) { /* Save region for mirror_end_io() handler */ bio_record->write_region = dm_rh_bio_to_region(ms->rh, bio); @@ -1256,12 +1259,22 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, int error) } if (error == -EOPNOTSUPP) - return error; + goto out; if ((error == -EWOULDBLOCK) && (bio->bi_opf & REQ_RAHEAD)) - return error; + goto out; if (unlikely(error)) { + if (!bio_record->details.bi_bdev) { + /* + * There wasn't enough memory to record necessary + * information for a retry or there was no other + * mirror in-sync. + */ + DMERR_LIMIT("Mirror read failed."); + return -EIO; + } + m = bio_record->m; DMERR("Mirror read failed from %s. Trying alternative device.", @@ -1277,6 +1290,7 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, int error) bd = &bio_record->details; dm_bio_restore(bd, bio); + bio_record->details.bi_bdev = NULL; bio->bi_error = 0; queue_bio(ms, bio, rw); @@ -1285,6 +1299,9 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, int error) DMERR("All replicated volumes dead, failing I/O"); } +out: + bio_record->details.bi_bdev = NULL; + return error; } From 25642705b2359a705784bbbf1655c25a8f8efde2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 14 Jun 2017 10:19:25 +1000 Subject: [PATCH 0847/1065] powerpc/xive: Fix offset for store EOI MMIOs Architecturally we should apply a 0x400 offset for these. Not doing it will break future HW implementations. The offset of 0 is supposed to remain for "triggers" though not all sources support both trigger and store EOI, and in P9 specifically, some sources will treat 0 as a store EOI. But future chips will not. So this makes us use the properly architected offset which should work always. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/xive.h | 12 +++++++----- arch/powerpc/kvm/book3s_xive_template.c | 4 ++-- arch/powerpc/sysdev/xive/common.c | 2 +- 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h index c8a822acf962..c23ff4389ca2 100644 --- a/arch/powerpc/include/asm/xive.h +++ b/arch/powerpc/include/asm/xive.h @@ -94,11 +94,13 @@ struct xive_q { * store at 0 and some ESBs support doing a trigger via a * separate trigger page. */ -#define XIVE_ESB_GET 0x800 -#define XIVE_ESB_SET_PQ_00 0xc00 -#define XIVE_ESB_SET_PQ_01 0xd00 -#define XIVE_ESB_SET_PQ_10 0xe00 -#define XIVE_ESB_SET_PQ_11 0xf00 +#define XIVE_ESB_STORE_EOI 0x400 /* Store */ +#define XIVE_ESB_LOAD_EOI 0x000 /* Load */ +#define XIVE_ESB_GET 0x800 /* Load */ +#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */ +#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */ +#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */ +#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */ #define XIVE_ESB_VAL_P 0x2 #define XIVE_ESB_VAL_Q 0x1 diff --git a/arch/powerpc/kvm/book3s_xive_template.c b/arch/powerpc/kvm/book3s_xive_template.c index 023a31133c37..4636ca6e7d38 100644 --- a/arch/powerpc/kvm/book3s_xive_template.c +++ b/arch/powerpc/kvm/book3s_xive_template.c @@ -69,7 +69,7 @@ static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd) { /* If the XIVE supports the new "store EOI facility, use it */ if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI) - __x_writeq(0, __x_eoi_page(xd)); + __x_writeq(0, __x_eoi_page(xd) + XIVE_ESB_STORE_EOI); else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) { opal_int_eoi(hw_irq); } else { @@ -89,7 +89,7 @@ static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd) * properly. */ if (xd->flags & XIVE_IRQ_FLAG_LSI) - __x_readq(__x_eoi_page(xd)); + __x_readq(__x_eoi_page(xd) + XIVE_ESB_LOAD_EOI); else { eoi_val = GLUE(X_PFX,esb_load)(xd, XIVE_ESB_SET_PQ_00); diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c index 913825086b8d..8f5e3035483b 100644 --- a/arch/powerpc/sysdev/xive/common.c +++ b/arch/powerpc/sysdev/xive/common.c @@ -297,7 +297,7 @@ void xive_do_source_eoi(u32 hw_irq, struct xive_irq_data *xd) { /* If the XIVE supports the new "store EOI facility, use it */ if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI) - out_be64(xd->eoi_mmio, 0); + out_be64(xd->eoi_mmio + XIVE_ESB_STORE_EOI, 0); else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) { /* * The FW told us to call it. This happens for some From 916335036d4fe33f9806240cb0d1900f4975b959 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 28 May 2017 09:52:17 +0200 Subject: [PATCH 0848/1065] i2c: rcar: use correct length when unmapping DMA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Because we need to transfer some bytes with PIO, the msg length is not the length of the DMA buffer. Use the correct value which we used when doing the mapping. Fixes: 73e8b0528346e8 ("i2c: rcar: add DMA support") Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 214bf2835d1f..8be3e6cb8fe6 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -319,7 +319,7 @@ static void rcar_i2c_dma_unmap(struct rcar_i2c_priv *priv) rcar_i2c_write(priv, ICFBSCR, TCYC06); dma_unmap_single(chan->device->dev, sg_dma_address(&priv->sg), - priv->msg->len, priv->dma_direction); + sg_dma_len(&priv->sg), priv->dma_direction); priv->dma_direction = DMA_NONE; } From 17e83549e199d89aace7788a9f11c108671eecf5 Mon Sep 17 00:00:00 2001 From: Liwei Song Date: Tue, 13 Jun 2017 00:59:53 -0400 Subject: [PATCH 0849/1065] i2c: ismt: fix wrong device address when unmap the data buffer Fix the following kernel bug: kernel BUG at drivers/iommu/intel-iommu.c:3260! invalid opcode: 0000 [#5] PREEMPT SMP Hardware name: Intel Corp. Harcuvar/Server, BIOS HAVLCRB0.X64.0013.D39.1608311820 08/31/2016 task: ffff880175389950 ti: ffff880176bec000 task.ti: ffff880176bec000 RIP: 0010:[] [] intel_unmap+0x25b/0x260 RSP: 0018:ffff880176bef5e8 EFLAGS: 00010296 RAX: 0000000000000024 RBX: ffff8800773c7c88 RCX: 000000000000ce04 RDX: 0000000080000000 RSI: 0000000000000000 RDI: 0000000000000009 RBP: ffff880176bef638 R08: 0000000000000010 R09: 0000000000000004 R10: ffff880175389c78 R11: 0000000000000a4f R12: ffff8800773c7868 R13: 00000000ffffac88 R14: ffff8800773c7818 R15: 0000000000000001 FS: 00007fef21258700(0000) GS:ffff88017b5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000066d6d8 CR3: 000000007118c000 CR4: 00000000003406e0 Stack: 00000000ffffac88 ffffffff8199867f ffff880176bef5f8 ffff880100000030 ffff880176bef668 ffff8800773c7c88 ffff880178288098 ffff8800772c0010 ffff8800773c7818 0000000000000001 ffff880176bef648 ffffffff8150a86e Call Trace: [] ? printk+0x46/0x48 [] intel_unmap_page+0xe/0x10 [] ismt_access+0x27b/0x8fa [i2c_ismt] [] ? __pm_runtime_suspend+0xa0/0xa0 [] ? pm_suspend_timer_fn+0x80/0x80 [] ? __pm_runtime_suspend+0xa0/0xa0 [] ? pm_suspend_timer_fn+0x80/0x80 [] ? pci_bus_read_dev_vendor_id+0xf0/0xf0 [] i2c_smbus_xfer+0xec/0x4b0 [] ? vprintk_emit+0x345/0x530 [] i2cdev_ioctl_smbus+0x12b/0x240 [i2c_dev] [] ? vprintk_default+0x29/0x40 [] i2cdev_ioctl+0x63/0x1ec [i2c_dev] [] do_vfs_ioctl+0x328/0x5d0 [] ? vfs_write+0x11c/0x190 [] ? rt_up_read+0x19/0x20 [] SyS_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x6e This happen When run "i2cdetect -y 0" detect SMBus iSMT adapter. After finished I2C block read/write, when unmap the data buffer, a wrong device address was pass to dma_unmap_single(). To fix this, give dma_unmap_single() the "dev" parameter, just like what dma_map_single() does, then unmap can find the right devices. Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller") Signed-off-by: Liwei Song Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-ismt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index f573448d2132..e98e44e584a4 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -584,7 +584,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr, /* unmap the data buffer */ if (dma_size != 0) - dma_unmap_single(&adap->dev, dma_addr, dma_size, dma_direction); + dma_unmap_single(dev, dma_addr, dma_size, dma_direction); if (unlikely(!time_left)) { dev_err(dev, "completion wait timed out\n"); From 7304e8f28bb2f3cb2baf37c1bb2caa0f54ca4e43 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 8 Jun 2017 11:27:14 -0700 Subject: [PATCH 0850/1065] iommu/vt-d: Correctly disable Intel IOMMU force on I made a mistake in commit bfd20f1. We should skip the force on with the option enabled instead of vice versa. Not sure why this passed our performance test, sorry. Fixes: bfd20f1cc850 ('x86, iommu/vt-d: Add an option to disable Intel IOMMU force on') Signed-off-by: Shaohua Li Signed-off-by: Joerg Roedel --- arch/x86/kernel/tboot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c index 4b1724059909..a4eb27918ceb 100644 --- a/arch/x86/kernel/tboot.c +++ b/arch/x86/kernel/tboot.c @@ -514,7 +514,7 @@ int tboot_force_iommu(void) if (!tboot_enabled()) return 0; - if (!intel_iommu_tboot_noforce) + if (intel_iommu_tboot_noforce) return 1; if (no_iommu || swiotlb || dmar_disabled) From f8a894b218138888542a5058d0e902378fd0d4ec Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 15 Jun 2017 16:33:58 +0800 Subject: [PATCH 0851/1065] ipv6: fix calling in6_ifa_hold incorrectly for dad work Now when starting the dad work in addrconf_mod_dad_work, if the dad work is idle and queued, it needs to hold ifa. The problem is there's one gap in [1], during which if the pending dad work is removed elsewhere. It will miss to hold ifa, but the dad word is still idea and queue. if (!delayed_work_pending(&ifp->dad_work)) in6_ifa_hold(ifp); <--------------[1] mod_delayed_work(addrconf_wq, &ifp->dad_work, delay); An use-after-free issue can be caused by this. Chen Wei found this issue when WARN_ON(!hlist_unhashed(&ifp->addr_lst)) in net6_ifa_finish_destroy was hit because of it. As Hannes' suggestion, this patch is to fix it by holding ifa first in addrconf_mod_dad_work, then calling mod_delayed_work and putting ifa if the dad_work is already in queue. Note that this patch did not choose to fix it with: if (!mod_delayed_work(delay)) in6_ifa_hold(ifp); As with it, when delay == 0, dad_work would be scheduled immediately, all addrconf_mod_dad_work(0) callings had to be moved under ifp->lock. Reported-by: Wei Chen Suggested-by: Hannes Frederic Sowa Acked-by: Hannes Frederic Sowa Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 6a4fb1e629fb..686c92375e81 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -332,9 +332,9 @@ static void addrconf_mod_rs_timer(struct inet6_dev *idev, static void addrconf_mod_dad_work(struct inet6_ifaddr *ifp, unsigned long delay) { - if (!delayed_work_pending(&ifp->dad_work)) - in6_ifa_hold(ifp); - mod_delayed_work(addrconf_wq, &ifp->dad_work, delay); + in6_ifa_hold(ifp); + if (mod_delayed_work(addrconf_wq, &ifp->dad_work, delay)) + in6_ifa_put(ifp); } static int snmp6_alloc_dev(struct inet6_dev *idev) From 6d0507a777fbc533f7f1bf5664a81982dd50dece Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Mon, 12 Jun 2017 12:47:32 +0100 Subject: [PATCH 0852/1065] brcmfmac: add parameter to pass error code in firmware callback Extend the parameters in the firmware callback so it can be called upon success and failure. This allows the caller to properly clear all resources in the failure path. Right now the error code is always zero, ie. success. Cc: stable@vger.kernel.org # 4.9.x- Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../broadcom/brcm80211/brcmfmac/firmware.c | 10 +++++----- .../broadcom/brcm80211/brcmfmac/firmware.h | 4 ++-- .../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 17 ++++++++++++----- .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 17 +++++++++++------ .../wireless/broadcom/brcm80211/brcmfmac/usb.c | 6 ++++-- 5 files changed, 34 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c index c7c1e9906500..ae61a24202ac 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c @@ -442,7 +442,7 @@ struct brcmf_fw { const char *nvram_name; u16 domain_nr; u16 bus_nr; - void (*done)(struct device *dev, const struct firmware *fw, + void (*done)(struct device *dev, int err, const struct firmware *fw, void *nvram_image, u32 nvram_len); }; @@ -477,7 +477,7 @@ static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx) if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL)) goto fail; - fwctx->done(fwctx->dev, fwctx->code, nvram, nvram_length); + fwctx->done(fwctx->dev, 0, fwctx->code, nvram, nvram_length); kfree(fwctx); return; @@ -499,7 +499,7 @@ static void brcmf_fw_request_code_done(const struct firmware *fw, void *ctx) /* only requested code so done here */ if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) { - fwctx->done(fwctx->dev, fw, NULL, 0); + fwctx->done(fwctx->dev, 0, fw, NULL, 0); kfree(fwctx); return; } @@ -522,7 +522,7 @@ fail: int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags, const char *code, const char *nvram, - void (*fw_cb)(struct device *dev, + void (*fw_cb)(struct device *dev, int err, const struct firmware *fw, void *nvram_image, u32 nvram_len), u16 domain_nr, u16 bus_nr) @@ -555,7 +555,7 @@ int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags, int brcmf_fw_get_firmwares(struct device *dev, u16 flags, const char *code, const char *nvram, - void (*fw_cb)(struct device *dev, + void (*fw_cb)(struct device *dev, int err, const struct firmware *fw, void *nvram_image, u32 nvram_len)) { diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h index d3c9f0d52ae3..8fa4b7e1ab3d 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h @@ -73,13 +73,13 @@ void brcmf_fw_nvram_free(void *nvram); */ int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags, const char *code, const char *nvram, - void (*fw_cb)(struct device *dev, + void (*fw_cb)(struct device *dev, int err, const struct firmware *fw, void *nvram_image, u32 nvram_len), u16 domain_nr, u16 bus_nr); int brcmf_fw_get_firmwares(struct device *dev, u16 flags, const char *code, const char *nvram, - void (*fw_cb)(struct device *dev, + void (*fw_cb)(struct device *dev, int err, const struct firmware *fw, void *nvram_image, u32 nvram_len)); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index f36b96dc6acd..f878706613e6 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -1650,16 +1650,23 @@ static const struct brcmf_buscore_ops brcmf_pcie_buscore_ops = { .write32 = brcmf_pcie_buscore_write32, }; -static void brcmf_pcie_setup(struct device *dev, const struct firmware *fw, +static void brcmf_pcie_setup(struct device *dev, int ret, + const struct firmware *fw, void *nvram, u32 nvram_len) { - struct brcmf_bus *bus = dev_get_drvdata(dev); - struct brcmf_pciedev *pcie_bus_dev = bus->bus_priv.pcie; - struct brcmf_pciedev_info *devinfo = pcie_bus_dev->devinfo; + struct brcmf_bus *bus; + struct brcmf_pciedev *pcie_bus_dev; + struct brcmf_pciedev_info *devinfo; struct brcmf_commonring **flowrings; - int ret; u32 i; + /* check firmware loading result */ + if (ret) + goto fail; + + bus = dev_get_drvdata(dev); + pcie_bus_dev = bus->bus_priv.pcie; + devinfo = pcie_bus_dev->devinfo; brcmf_pcie_attach(devinfo); /* Some of the firmwares have the size of the memory of the device diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index e03450059b06..6e1fcdcde11c 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -3982,21 +3982,26 @@ static const struct brcmf_bus_ops brcmf_sdio_bus_ops = { .get_memdump = brcmf_sdio_bus_get_memdump, }; -static void brcmf_sdio_firmware_callback(struct device *dev, +static void brcmf_sdio_firmware_callback(struct device *dev, int err, const struct firmware *code, void *nvram, u32 nvram_len) { - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; - struct brcmf_sdio *bus = sdiodev->bus; - int err = 0; + struct brcmf_bus *bus_if; + struct brcmf_sdio_dev *sdiodev; + struct brcmf_sdio *bus; u8 saveclk; - brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev)); + brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err); + if (err) + goto fail; + bus_if = dev_get_drvdata(dev); if (!bus_if->drvr) return; + sdiodev = bus_if->bus_priv.sdio; + bus = sdiodev->bus; + /* try to download image and nvram to the dongle */ bus->alp_only = true; err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c index e4d545f9edee..9ce3b55c3ffe 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c @@ -1159,13 +1159,15 @@ fail: return ret; } -static void brcmf_usb_probe_phase2(struct device *dev, +static void brcmf_usb_probe_phase2(struct device *dev, int ret, const struct firmware *fw, void *nvram, u32 nvlen) { struct brcmf_bus *bus = dev_get_drvdata(dev); struct brcmf_usbdev_info *devinfo; - int ret; + + if (ret) + goto error; brcmf_dbg(USB, "Start fw downloading\n"); From 03fb0e8393fae8ebb6710a99387853ed0becbc8e Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Mon, 12 Jun 2017 12:47:33 +0100 Subject: [PATCH 0853/1065] brcmfmac: use firmware callback upon failure to load When firmware loading failed the code used to unbind the device provided by the calling code. However, for the sdio driver two devices are bound and both need to be released upon failure. The callback has been extended with parameter to pass error code so add that in this commit upon firmware loading failure. Cc: stable@vger.kernel.org # 4.9.x- Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../broadcom/brcm80211/brcmfmac/firmware.c | 27 +++++++++---------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c index ae61a24202ac..d231042f19d6 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c @@ -484,39 +484,38 @@ static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx) fail: brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev)); release_firmware(fwctx->code); - device_release_driver(fwctx->dev); + fwctx->done(fwctx->dev, -ENOENT, NULL, NULL, 0); kfree(fwctx); } static void brcmf_fw_request_code_done(const struct firmware *fw, void *ctx) { struct brcmf_fw *fwctx = ctx; - int ret; + int ret = 0; brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(fwctx->dev)); - if (!fw) + if (!fw) { + ret = -ENOENT; goto fail; - - /* only requested code so done here */ - if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) { - fwctx->done(fwctx->dev, 0, fw, NULL, 0); - kfree(fwctx); - return; } + /* only requested code so done here */ + if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) + goto done; + fwctx->code = fw; ret = request_firmware_nowait(THIS_MODULE, true, fwctx->nvram_name, fwctx->dev, GFP_KERNEL, fwctx, brcmf_fw_request_nvram_done); - if (!ret) - return; - - brcmf_fw_request_nvram_done(NULL, fwctx); + /* pass NULL to nvram callback for bcm47xx fallback */ + if (ret) + brcmf_fw_request_nvram_done(NULL, fwctx); return; fail: brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev)); - device_release_driver(fwctx->dev); +done: + fwctx->done(fwctx->dev, ret, fw, NULL, 0); kfree(fwctx); } From 7a51461fc2da82a6c565a3ee65c41c197f28225d Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Mon, 12 Jun 2017 12:47:34 +0100 Subject: [PATCH 0854/1065] brcmfmac: unbind all devices upon failure in firmware callback When request firmware fails, brcmf_ops_sdio_remove is being called and brcmf_bus freed. In such circumstancies if you do a suspend/resume cycle the kernel hangs on resume due a NULL pointer dereference in resume function. So in brcmf_sdio_firmware_callback() we need to unbind the driver from both sdio_func devices when firmware load failure is indicated. Cc: stable@vger.kernel.org # 4.9.x- Tested-by: Enric Balletbo i Serra Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 6e1fcdcde11c..5653d6dd38f6 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -3992,14 +3992,14 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err, u8 saveclk; brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err); + bus_if = dev_get_drvdata(dev); + sdiodev = bus_if->bus_priv.sdio; if (err) goto fail; - bus_if = dev_get_drvdata(dev); if (!bus_if->drvr) return; - sdiodev = bus_if->bus_priv.sdio; bus = sdiodev->bus; /* try to download image and nvram to the dongle */ @@ -4088,6 +4088,7 @@ release: fail: brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err); device_release_driver(dev); + device_release_driver(&sdiodev->func[2]->dev); } struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) From a2b7a622d6292b693544d7c94bb5d11c3f4676f8 Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Mon, 12 Jun 2017 12:56:35 +0100 Subject: [PATCH 0855/1065] brcmfmac: fix brcmf_fws_add_interface() for USB devices USB devices rely on queuing functionality provided by the fwsignal module regardless the mode fwsignal is operating in. For this some data structure needs to be reserved which is tied to the interface, which is done by brcmf_fws_add_interface(). However, it checks the mode. Replace that by checking result from brcmf_fws_queue_skbs(). Otherwise the driver will crash in a null pointer dereference when data is transmitted on the interface. Fixes: fc0471e3e884 ("brcmfmac: ignore interfaces when fwsignal is disabled") Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c index 72373e59308e..f59642b2c935 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c @@ -2145,7 +2145,7 @@ void brcmf_fws_add_interface(struct brcmf_if *ifp) struct brcmf_fws_info *fws = drvr_to_fws(ifp->drvr); struct brcmf_fws_mac_descriptor *entry; - if (!ifp->ndev || fws->fcmode == BRCMF_FWS_FCMODE_NONE) + if (!ifp->ndev || !brcmf_fws_queue_skbs(fws)) return; entry = &fws->desc.iface[ifp->ifidx]; From 0cbb738108927916a659b5b0b96e386fcd7cc6e1 Mon Sep 17 00:00:00 2001 From: Mathieu Larouche Date: Wed, 14 Jun 2017 10:39:42 -0400 Subject: [PATCH 0856/1065] drm/mgag200: Fix to always set HiPri for G200e4 V2 - Changed the HiPri value for G200e4 to always be 0. - Added Bandwith limitation to block resolution above 1920x1200x60Hz Signed-off-by: Mathieu Larouche Acked-by: Dave Airlie [seanpaul removed some trailing whitespace from the patch] Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/ec0f8568d7ec41904dfe593c5deccf3f062d7bd8.1497450944.git.mathieu.larouche@matrox.com --- drivers/gpu/drm/mgag200/mgag200_mode.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index adb411a078e8..f4b53588e071 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -1173,7 +1173,10 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, if (IS_G200_SE(mdev)) { - if (mdev->unique_rev_id >= 0x02) { + if (mdev->unique_rev_id >= 0x04) { + WREG8(MGAREG_CRTCEXT_INDEX, 0x06); + WREG8(MGAREG_CRTCEXT_DATA, 0); + } else if (mdev->unique_rev_id >= 0x02) { u8 hi_pri_lvl; u32 bpp; u32 mb; @@ -1639,6 +1642,10 @@ static int mga_vga_mode_valid(struct drm_connector *connector, if (mga_vga_calculate_mode_bandwidth(mode, bpp) > (30100 * 1024)) return MODE_BANDWIDTH; + } else { + if (mga_vga_calculate_mode_bandwidth(mode, bpp) + > (55000 * 1024)) + return MODE_BANDWIDTH; } } else if (mdev->type == G200_WB) { if (mode->hdisplay > 1280) From 5f2f97656ada8d811d3c1bef503ced266fcd53a0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 15 Jun 2017 00:12:24 +0100 Subject: [PATCH 0857/1065] rxrpc: Fix several cases where a padded len isn't checked in ticket decode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes CVE-2017-7482. When a kerberos 5 ticket is being decoded so that it can be loaded into an rxrpc-type key, there are several places in which the length of a variable-length field is checked to make sure that it's not going to overrun the available data - but the data is padded to the nearest four-byte boundary and the code doesn't check for this extra. This could lead to the size-remaining variable wrapping and the data pointer going over the end of the buffer. Fix this by making the various variable-length data checks use the padded length. Reported-by: 石磊 Signed-off-by: David Howells Reviewed-by: Marc Dionne Reviewed-by: Dan Carpenter Signed-off-by: David S. Miller --- net/rxrpc/key.c | 64 ++++++++++++++++++++++++++----------------------- 1 file changed, 34 insertions(+), 30 deletions(-) diff --git a/net/rxrpc/key.c b/net/rxrpc/key.c index 0a4e28477ad9..54369225766e 100644 --- a/net/rxrpc/key.c +++ b/net/rxrpc/key.c @@ -217,7 +217,7 @@ static int rxrpc_krb5_decode_principal(struct krb5_principal *princ, unsigned int *_toklen) { const __be32 *xdr = *_xdr; - unsigned int toklen = *_toklen, n_parts, loop, tmp; + unsigned int toklen = *_toklen, n_parts, loop, tmp, paddedlen; /* there must be at least one name, and at least #names+1 length * words */ @@ -247,16 +247,16 @@ static int rxrpc_krb5_decode_principal(struct krb5_principal *princ, toklen -= 4; if (tmp <= 0 || tmp > AFSTOKEN_STRING_MAX) return -EINVAL; - if (tmp > toklen) + paddedlen = (tmp + 3) & ~3; + if (paddedlen > toklen) return -EINVAL; princ->name_parts[loop] = kmalloc(tmp + 1, GFP_KERNEL); if (!princ->name_parts[loop]) return -ENOMEM; memcpy(princ->name_parts[loop], xdr, tmp); princ->name_parts[loop][tmp] = 0; - tmp = (tmp + 3) & ~3; - toklen -= tmp; - xdr += tmp >> 2; + toklen -= paddedlen; + xdr += paddedlen >> 2; } if (toklen < 4) @@ -265,16 +265,16 @@ static int rxrpc_krb5_decode_principal(struct krb5_principal *princ, toklen -= 4; if (tmp <= 0 || tmp > AFSTOKEN_K5_REALM_MAX) return -EINVAL; - if (tmp > toklen) + paddedlen = (tmp + 3) & ~3; + if (paddedlen > toklen) return -EINVAL; princ->realm = kmalloc(tmp + 1, GFP_KERNEL); if (!princ->realm) return -ENOMEM; memcpy(princ->realm, xdr, tmp); princ->realm[tmp] = 0; - tmp = (tmp + 3) & ~3; - toklen -= tmp; - xdr += tmp >> 2; + toklen -= paddedlen; + xdr += paddedlen >> 2; _debug("%s/...@%s", princ->name_parts[0], princ->realm); @@ -293,7 +293,7 @@ static int rxrpc_krb5_decode_tagged_data(struct krb5_tagged_data *td, unsigned int *_toklen) { const __be32 *xdr = *_xdr; - unsigned int toklen = *_toklen, len; + unsigned int toklen = *_toklen, len, paddedlen; /* there must be at least one tag and one length word */ if (toklen <= 8) @@ -307,15 +307,17 @@ static int rxrpc_krb5_decode_tagged_data(struct krb5_tagged_data *td, toklen -= 8; if (len > max_data_size) return -EINVAL; + paddedlen = (len + 3) & ~3; + if (paddedlen > toklen) + return -EINVAL; td->data_len = len; if (len > 0) { td->data = kmemdup(xdr, len, GFP_KERNEL); if (!td->data) return -ENOMEM; - len = (len + 3) & ~3; - toklen -= len; - xdr += len >> 2; + toklen -= paddedlen; + xdr += paddedlen >> 2; } _debug("tag %x len %x", td->tag, td->data_len); @@ -387,7 +389,7 @@ static int rxrpc_krb5_decode_ticket(u8 **_ticket, u16 *_tktlen, const __be32 **_xdr, unsigned int *_toklen) { const __be32 *xdr = *_xdr; - unsigned int toklen = *_toklen, len; + unsigned int toklen = *_toklen, len, paddedlen; /* there must be at least one length word */ if (toklen <= 4) @@ -399,6 +401,9 @@ static int rxrpc_krb5_decode_ticket(u8 **_ticket, u16 *_tktlen, toklen -= 4; if (len > AFSTOKEN_K5_TIX_MAX) return -EINVAL; + paddedlen = (len + 3) & ~3; + if (paddedlen > toklen) + return -EINVAL; *_tktlen = len; _debug("ticket len %u", len); @@ -407,9 +412,8 @@ static int rxrpc_krb5_decode_ticket(u8 **_ticket, u16 *_tktlen, *_ticket = kmemdup(xdr, len, GFP_KERNEL); if (!*_ticket) return -ENOMEM; - len = (len + 3) & ~3; - toklen -= len; - xdr += len >> 2; + toklen -= paddedlen; + xdr += paddedlen >> 2; } *_xdr = xdr; @@ -552,7 +556,7 @@ static int rxrpc_preparse_xdr(struct key_preparsed_payload *prep) { const __be32 *xdr = prep->data, *token; const char *cp; - unsigned int len, tmp, loop, ntoken, toklen, sec_ix; + unsigned int len, paddedlen, loop, ntoken, toklen, sec_ix; size_t datalen = prep->datalen; int ret; @@ -578,22 +582,21 @@ static int rxrpc_preparse_xdr(struct key_preparsed_payload *prep) if (len < 1 || len > AFSTOKEN_CELL_MAX) goto not_xdr; datalen -= 4; - tmp = (len + 3) & ~3; - if (tmp > datalen) + paddedlen = (len + 3) & ~3; + if (paddedlen > datalen) goto not_xdr; cp = (const char *) xdr; for (loop = 0; loop < len; loop++) if (!isprint(cp[loop])) goto not_xdr; - if (len < tmp) - for (; loop < tmp; loop++) - if (cp[loop]) - goto not_xdr; + for (; loop < paddedlen; loop++) + if (cp[loop]) + goto not_xdr; _debug("cellname: [%u/%u] '%*.*s'", - len, tmp, len, len, (const char *) xdr); - datalen -= tmp; - xdr += tmp >> 2; + len, paddedlen, len, len, (const char *) xdr); + datalen -= paddedlen; + xdr += paddedlen >> 2; /* get the token count */ if (datalen < 12) @@ -614,10 +617,11 @@ static int rxrpc_preparse_xdr(struct key_preparsed_payload *prep) sec_ix = ntohl(*xdr); datalen -= 4; _debug("token: [%x/%zx] %x", toklen, datalen, sec_ix); - if (toklen < 20 || toklen > datalen) + paddedlen = (toklen + 3) & ~3; + if (toklen < 20 || toklen > datalen || paddedlen > datalen) goto not_xdr; - datalen -= (toklen + 3) & ~3; - xdr += (toklen + 3) >> 2; + datalen -= paddedlen; + xdr += paddedlen >> 2; } while (--loop > 0); From 0f933328f018c118ded2035f12068bbdfdef399d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 5 May 2017 15:01:41 -0300 Subject: [PATCH 0858/1065] drm: mxsfb_crtc: Reset the eLCDIF controller According to the eLCDIF initialization steps listed in the MX6SX Reference Manual the eLCDIF block reset is mandatory. Without performing the eLCDIF reset the display shows garbage content when the kernel boots. In earlier tests this issue has not been observed because the bootloader was previously showing a splash screen and the bootloader display driver does properly implement the eLCDIF reset. Add the eLCDIF reset to the driver, so that it can operate correctly independently of the bootloader. Tested on a imx6sx-sdb board. Cc: Signed-off-by: Fabio Estevam Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/1494007301-14535-1-git-send-email-fabio.estevam@nxp.com --- drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 42 ++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c index 1144e0c9e894..0abe77675b76 100644 --- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c +++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c @@ -35,6 +35,13 @@ #include "mxsfb_drv.h" #include "mxsfb_regs.h" +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 +#define MODULE_CLKGATE BIT(30) +#define MODULE_SFTRST BIT(31) +/* 1 second delay should be plenty of time for block reset */ +#define RESET_TIMEOUT 1000000 + static u32 set_hsync_pulse_width(struct mxsfb_drm_private *mxsfb, u32 val) { return (val & mxsfb->devdata->hs_wdth_mask) << @@ -159,6 +166,36 @@ static void mxsfb_disable_controller(struct mxsfb_drm_private *mxsfb) clk_disable_unprepare(mxsfb->clk_disp_axi); } +/* + * Clear the bit and poll it cleared. This is usually called with + * a reset address and mask being either SFTRST(bit 31) or CLKGATE + * (bit 30). + */ +static int clear_poll_bit(void __iomem *addr, u32 mask) +{ + u32 reg; + + writel(mask, addr + MXS_CLR_ADDR); + return readl_poll_timeout(addr, reg, !(reg & mask), 0, RESET_TIMEOUT); +} + +static int mxsfb_reset_block(void __iomem *reset_addr) +{ + int ret; + + ret = clear_poll_bit(reset_addr, MODULE_SFTRST); + if (ret) + return ret; + + writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR); + + ret = clear_poll_bit(reset_addr, MODULE_SFTRST); + if (ret) + return ret; + + return clear_poll_bit(reset_addr, MODULE_CLKGATE); +} + static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb) { struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode; @@ -173,6 +210,11 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb) */ mxsfb_enable_axi_clk(mxsfb); + /* Mandatory eLCDIF reset as per the Reference Manual */ + err = mxsfb_reset_block(mxsfb->base); + if (err) + return; + /* Clear the FIFOs */ writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET); From 988c7322116970696211e902b468aefec95b6ec4 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 15 Jun 2017 17:49:08 +0800 Subject: [PATCH 0859/1065] sctp: return next obj by passing pos + 1 into sctp_transport_get_idx In sctp_for_each_transport, pos is used to save how many objs it has dumped. Now it gets the last obj by sctp_transport_get_idx, then gets the next obj by sctp_transport_get_next. The issue is that in the meanwhile if some objs in transport hashtable are removed and the objs nums are less than pos, sctp_transport_get_idx would return NULL and hti.walker.tbl is NULL as well. At this moment it should stop hti, instead of continue getting the next obj. Or it would cause a NULL pointer dereference in sctp_transport_get_next. This patch is to pass pos + 1 into sctp_transport_get_idx to get the next obj directly, even if pos > objs nums, it would return NULL and stop hti. Fixes: 626d16f50f39 ("sctp: export some apis or variables for sctp_diag and reuse some for proc") Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/sctp/socket.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 30aa0a529215..3a8318e518f1 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4666,9 +4666,8 @@ int sctp_for_each_transport(int (*cb)(struct sctp_transport *, void *), if (err) return err; - sctp_transport_get_idx(net, &hti, pos); - obj = sctp_transport_get_next(net, &hti); - for (; obj && !IS_ERR(obj); obj = sctp_transport_get_next(net, &hti)) { + obj = sctp_transport_get_idx(net, &hti, pos + 1); + for (; !IS_ERR_OR_NULL(obj); obj = sctp_transport_get_next(net, &hti)) { struct sctp_transport *transport = obj; if (!sctp_transport_hold(transport)) From 3b1bbafbfd14474fee61487552c9916ec1b25c58 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Thu, 15 Jun 2017 20:59:57 +0200 Subject: [PATCH 0860/1065] Doc: net: dsa: b53: update location of referenced dsa.txt The referenced file dsa.txt is located at Documentation/devicetree/bindings/net/dsa/dsa.txt Reviewed-by: Florian Fainelli Signed-off-by: Heinrich Schuchardt Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/dsa/b53.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt index d6c6e41648d4..8ec2ca21adeb 100644 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt @@ -34,7 +34,7 @@ Required properties: "brcm,bcm6328-switch" "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. Examples: From f16443a034c7aa359ddf6f0f9bc40d01ca31faea Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 13 Jun 2017 15:23:42 -0400 Subject: [PATCH 0861/1065] USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks Using the syzkaller kernel fuzzer, Andrey Konovalov generated the following error in gadgetfs: > BUG: KASAN: use-after-free in __lock_acquire+0x3069/0x3690 > kernel/locking/lockdep.c:3246 > Read of size 8 at addr ffff88003a2bdaf8 by task kworker/3:1/903 > > CPU: 3 PID: 903 Comm: kworker/3:1 Not tainted 4.12.0-rc4+ #35 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 > Workqueue: usb_hub_wq hub_event > Call Trace: > __dump_stack lib/dump_stack.c:16 [inline] > dump_stack+0x292/0x395 lib/dump_stack.c:52 > print_address_description+0x78/0x280 mm/kasan/report.c:252 > kasan_report_error mm/kasan/report.c:351 [inline] > kasan_report+0x230/0x340 mm/kasan/report.c:408 > __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:429 > __lock_acquire+0x3069/0x3690 kernel/locking/lockdep.c:3246 > lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855 > __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] > _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 > spin_lock include/linux/spinlock.h:299 [inline] > gadgetfs_suspend+0x89/0x130 drivers/usb/gadget/legacy/inode.c:1682 > set_link_state+0x88e/0xae0 drivers/usb/gadget/udc/dummy_hcd.c:455 > dummy_hub_control+0xd7e/0x1fb0 drivers/usb/gadget/udc/dummy_hcd.c:2074 > rh_call_control drivers/usb/core/hcd.c:689 [inline] > rh_urb_enqueue drivers/usb/core/hcd.c:846 [inline] > usb_hcd_submit_urb+0x92f/0x20b0 drivers/usb/core/hcd.c:1650 > usb_submit_urb+0x8b2/0x12c0 drivers/usb/core/urb.c:542 > usb_start_wait_urb+0x148/0x5b0 drivers/usb/core/message.c:56 > usb_internal_control_msg drivers/usb/core/message.c:100 [inline] > usb_control_msg+0x341/0x4d0 drivers/usb/core/message.c:151 > usb_clear_port_feature+0x74/0xa0 drivers/usb/core/hub.c:412 > hub_port_disable+0x123/0x510 drivers/usb/core/hub.c:4177 > hub_port_init+0x1ed/0x2940 drivers/usb/core/hub.c:4648 > hub_port_connect drivers/usb/core/hub.c:4826 [inline] > hub_port_connect_change drivers/usb/core/hub.c:4999 [inline] > port_event drivers/usb/core/hub.c:5105 [inline] > hub_event+0x1ae1/0x3d40 drivers/usb/core/hub.c:5185 > process_one_work+0xc08/0x1bd0 kernel/workqueue.c:2097 > process_scheduled_works kernel/workqueue.c:2157 [inline] > worker_thread+0xb2b/0x1860 kernel/workqueue.c:2233 > kthread+0x363/0x440 kernel/kthread.c:231 > ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:424 > > Allocated by task 9958: > save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 > save_stack+0x43/0xd0 mm/kasan/kasan.c:513 > set_track mm/kasan/kasan.c:525 [inline] > kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:617 > kmem_cache_alloc_trace+0x87/0x280 mm/slub.c:2745 > kmalloc include/linux/slab.h:492 [inline] > kzalloc include/linux/slab.h:665 [inline] > dev_new drivers/usb/gadget/legacy/inode.c:170 [inline] > gadgetfs_fill_super+0x24f/0x540 drivers/usb/gadget/legacy/inode.c:1993 > mount_single+0xf6/0x160 fs/super.c:1192 > gadgetfs_mount+0x31/0x40 drivers/usb/gadget/legacy/inode.c:2019 > mount_fs+0x9c/0x2d0 fs/super.c:1223 > vfs_kern_mount.part.25+0xcb/0x490 fs/namespace.c:976 > vfs_kern_mount fs/namespace.c:2509 [inline] > do_new_mount fs/namespace.c:2512 [inline] > do_mount+0x41b/0x2d90 fs/namespace.c:2834 > SYSC_mount fs/namespace.c:3050 [inline] > SyS_mount+0xb0/0x120 fs/namespace.c:3027 > entry_SYSCALL_64_fastpath+0x1f/0xbe > > Freed by task 9960: > save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 > save_stack+0x43/0xd0 mm/kasan/kasan.c:513 > set_track mm/kasan/kasan.c:525 [inline] > kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:590 > slab_free_hook mm/slub.c:1357 [inline] > slab_free_freelist_hook mm/slub.c:1379 [inline] > slab_free mm/slub.c:2961 [inline] > kfree+0xed/0x2b0 mm/slub.c:3882 > put_dev+0x124/0x160 drivers/usb/gadget/legacy/inode.c:163 > gadgetfs_kill_sb+0x33/0x60 drivers/usb/gadget/legacy/inode.c:2027 > deactivate_locked_super+0x8d/0xd0 fs/super.c:309 > deactivate_super+0x21e/0x310 fs/super.c:340 > cleanup_mnt+0xb7/0x150 fs/namespace.c:1112 > __cleanup_mnt+0x1b/0x20 fs/namespace.c:1119 > task_work_run+0x1a0/0x280 kernel/task_work.c:116 > exit_task_work include/linux/task_work.h:21 [inline] > do_exit+0x18a8/0x2820 kernel/exit.c:878 > do_group_exit+0x14e/0x420 kernel/exit.c:982 > get_signal+0x784/0x1780 kernel/signal.c:2318 > do_signal+0xd7/0x2130 arch/x86/kernel/signal.c:808 > exit_to_usermode_loop+0x1ac/0x240 arch/x86/entry/common.c:157 > prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] > syscall_return_slowpath+0x3ba/0x410 arch/x86/entry/common.c:263 > entry_SYSCALL_64_fastpath+0xbc/0xbe > > The buggy address belongs to the object at ffff88003a2bdae0 > which belongs to the cache kmalloc-1024 of size 1024 > The buggy address is located 24 bytes inside of > 1024-byte region [ffff88003a2bdae0, ffff88003a2bdee0) > The buggy address belongs to the page: > page:ffffea0000e8ae00 count:1 mapcount:0 mapping: (null) > index:0x0 compound_mapcount: 0 > flags: 0x100000000008100(slab|head) > raw: 0100000000008100 0000000000000000 0000000000000000 0000000100170017 > raw: ffffea0000ed3020 ffffea0000f5f820 ffff88003e80efc0 0000000000000000 > page dumped because: kasan: bad access detected > > Memory state around the buggy address: > ffff88003a2bd980: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > ffff88003a2bda00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > >ffff88003a2bda80: fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb fb > ^ > ffff88003a2bdb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff88003a2bdb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ================================================================== What this means is that the gadgetfs_suspend() routine was trying to access dev->lock after it had been deallocated. The root cause is a race in the dummy_hcd driver; the dummy_udc_stop() routine can race with the rest of the driver because it contains no locking. And even when proper locking is added, it can still race with the set_link_state() function because that function incorrectly drops the private spinlock before invoking any gadget driver callbacks. The result of this race, as seen above, is that set_link_state() can invoke a callback in gadgetfs even after gadgetfs has been unbound from dummy_hcd's UDC and its private data structures have been deallocated. include/linux/usb/gadget.h documents that the ->reset, ->disconnect, ->suspend, and ->resume callbacks may be invoked in interrupt context. In general this is necessary, to prevent races with gadget driver removal. This patch fixes dummy_hcd to retain the spinlock across these calls, and it adds a spinlock acquisition to dummy_udc_stop() to prevent the race. The net2280 driver makes the same mistake of dropping the private spinlock for its ->disconnect and ->reset callback invocations. The patch fixes it too. Lastly, since gadgetfs_suspend() may be invoked in interrupt context, it cannot assume that interrupts are enabled when it runs. It must use spin_lock_irqsave() instead of spin_lock_irq(). The patch fixes that bug as well. Signed-off-by: Alan Stern Reported-and-tested-by: Andrey Konovalov CC: Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/legacy/inode.c | 5 +++-- drivers/usb/gadget/udc/dummy_hcd.c | 13 ++++--------- drivers/usb/gadget/udc/net2280.c | 9 +-------- 3 files changed, 8 insertions(+), 19 deletions(-) diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 5ffd879f7886..684900fcfe24 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -1679,9 +1679,10 @@ static void gadgetfs_suspend (struct usb_gadget *gadget) { struct dev_data *dev = get_gadget_data (gadget); + unsigned long flags; INFO (dev, "suspended from state %d\n", dev->state); - spin_lock (&dev->lock); + spin_lock_irqsave(&dev->lock, flags); switch (dev->state) { case STATE_DEV_SETUP: // VERY odd... host died?? case STATE_DEV_CONNECTED: @@ -1692,7 +1693,7 @@ gadgetfs_suspend (struct usb_gadget *gadget) default: break; } - spin_unlock (&dev->lock); + spin_unlock_irqrestore(&dev->lock, flags); } static struct usb_gadget_driver gadgetfs_driver = { diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index ccabb51cb98d..7635fd7cc328 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -442,23 +442,16 @@ static void set_link_state(struct dummy_hcd *dum_hcd) /* Report reset and disconnect events to the driver */ if (dum->driver && (disconnect || reset)) { stop_activity(dum); - spin_unlock(&dum->lock); if (reset) usb_gadget_udc_reset(&dum->gadget, dum->driver); else dum->driver->disconnect(&dum->gadget); - spin_lock(&dum->lock); } } else if (dum_hcd->active != dum_hcd->old_active) { - if (dum_hcd->old_active && dum->driver->suspend) { - spin_unlock(&dum->lock); + if (dum_hcd->old_active && dum->driver->suspend) dum->driver->suspend(&dum->gadget); - spin_lock(&dum->lock); - } else if (!dum_hcd->old_active && dum->driver->resume) { - spin_unlock(&dum->lock); + else if (!dum_hcd->old_active && dum->driver->resume) dum->driver->resume(&dum->gadget); - spin_lock(&dum->lock); - } } dum_hcd->old_status = dum_hcd->port_status; @@ -983,7 +976,9 @@ static int dummy_udc_stop(struct usb_gadget *g) struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); struct dummy *dum = dum_hcd->dum; + spin_lock_irq(&dum->lock); dum->driver = NULL; + spin_unlock_irq(&dum->lock); return 0; } diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index 6cf07857eaca..f2cbd7f8005e 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -2470,11 +2470,8 @@ static void stop_activity(struct net2280 *dev, struct usb_gadget_driver *driver) nuke(&dev->ep[i]); /* report disconnect; the driver is already quiesced */ - if (driver) { - spin_unlock(&dev->lock); + if (driver) driver->disconnect(&dev->gadget); - spin_lock(&dev->lock); - } usb_reinit(dev); } @@ -3348,8 +3345,6 @@ next_endpoints: BIT(PCI_RETRY_ABORT_INTERRUPT)) static void handle_stat1_irqs(struct net2280 *dev, u32 stat) -__releases(dev->lock) -__acquires(dev->lock) { struct net2280_ep *ep; u32 tmp, num, mask, scratch; @@ -3390,14 +3385,12 @@ __acquires(dev->lock) if (disconnect || reset) { stop_activity(dev, dev->driver); ep0_start(dev); - spin_unlock(&dev->lock); if (reset) usb_gadget_udc_reset (&dev->gadget, dev->driver); else (dev->driver->disconnect) (&dev->gadget); - spin_lock(&dev->lock); return; } } From 6c780a0267b8a1075f40b39851132eeaefefcff5 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 8 Jun 2017 11:33:16 -0500 Subject: [PATCH 0862/1065] net/mlx5: Wait for FW readiness before initializing command interface Before attempting to initialize the command interface we must wait till the fw_initializing bit is clear. If we fail to meet this condition the hardware will drop our configuration, specifically the descriptors page address. This scenario can happen when the firmware is still executing an FLR flow and did not finish yet so the driver needs to wait for that to finish. Fixes: e3297246c2c8 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 4f577a5abf88..13be264587f1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -175,8 +175,9 @@ static struct mlx5_profile profile[] = { }, }; -#define FW_INIT_TIMEOUT_MILI 2000 -#define FW_INIT_WAIT_MS 2 +#define FW_INIT_TIMEOUT_MILI 2000 +#define FW_INIT_WAIT_MS 2 +#define FW_PRE_INIT_TIMEOUT_MILI 10000 static int wait_fw_init(struct mlx5_core_dev *dev, u32 max_wait_mili) { @@ -1013,6 +1014,15 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, */ dev->state = MLX5_DEVICE_STATE_UP; + /* wait for firmware to accept initialization segments configurations + */ + err = wait_fw_init(dev, FW_PRE_INIT_TIMEOUT_MILI); + if (err) { + dev_err(&dev->pdev->dev, "Firmware over %d MS in pre-initializing state, aborting\n", + FW_PRE_INIT_TIMEOUT_MILI); + goto out; + } + err = mlx5_cmd_init(dev); if (err) { dev_err(&pdev->dev, "Failed initializing command interface, aborting\n"); From f0b381178b01b831f9907d72f467d6443afdea67 Mon Sep 17 00:00:00 2001 From: Maor Dickman Date: Thu, 18 May 2017 15:15:08 +0300 Subject: [PATCH 0863/1065] net/mlx5e: Fix timestamping capabilities reporting Misuse of (BIT) macro caused to report wrong flags for "Hardware Transmit Timestamp Modes" and "Hardware Receive Filter Modes" Fixes: ef9814deafd0 ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by: Maor Dickman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 8209affa75c3..16486dff1493 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -1242,11 +1242,11 @@ static int mlx5e_get_ts_info(struct net_device *dev, SOF_TIMESTAMPING_RX_HARDWARE | SOF_TIMESTAMPING_RAW_HARDWARE; - info->tx_types = (BIT(1) << HWTSTAMP_TX_OFF) | - (BIT(1) << HWTSTAMP_TX_ON); + info->tx_types = BIT(HWTSTAMP_TX_OFF) | + BIT(HWTSTAMP_TX_ON); - info->rx_filters = (BIT(1) << HWTSTAMP_FILTER_NONE) | - (BIT(1) << HWTSTAMP_FILTER_ALL); + info->rx_filters = BIT(HWTSTAMP_FILTER_NONE) | + BIT(HWTSTAMP_FILTER_ALL); return 0; } From 5f195c2c5cba60241004146cd12d71451d6b0fc4 Mon Sep 17 00:00:00 2001 From: Chris Mi Date: Tue, 16 May 2017 07:07:11 -0400 Subject: [PATCH 0864/1065] net/mlx5e: Fix min inline value for VF rep SQs The offending commit only changed the code path for PF/VF, but it didn't take care of VF representors. As a result, since params->tx_min_inline_mode for VF representors is kzalloced to 0 (MLX5_INLINE_MODE_NONE), all VF reps SQs were set to that mode. This actually works on CX5 by default but broke CX4. Fix that by adding a call to query the min inline mode from the VF rep build up code. Fixes: a6f402e49901 ("net/mlx5e: Tx, no inline copy on ConnectX-5") Signed-off-by: Chris Mi Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 79462c0368a0..46984a52a94b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -791,6 +791,8 @@ static void mlx5e_build_rep_params(struct mlx5_core_dev *mdev, params->tx_max_inline = mlx5e_get_max_inline_cap(mdev); params->num_tc = 1; params->lro_wqe_sz = MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ; + + mlx5_query_min_inline(mdev, ¶ms->tx_min_inline_mode); } static void mlx5e_build_rep_netdev(struct net_device *netdev) From 9d1cef196b2687e9338c4268a3aa0ca521686bc9 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 4 Jun 2017 19:36:17 +0300 Subject: [PATCH 0865/1065] net/mlx5: Properly check applicability of devlink eswitch commands Currently we don't check that the link type is Eth and hence crash on IB ports when attempting to deref esw->xxx, fix that. To avoid repeating this check over and over, put the existing checks and the one on link type in a single helper. Fixes: 7768d1971de6 ('net/mlx5: E-Switch, Add control for encapsulation') Signed-off-by: Or Gerlitz Reported-by: Mohamad Badarnah Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- .../mellanox/mlx5/core/eswitch_offloads.c | 77 ++++++++++--------- 1 file changed, 40 insertions(+), 37 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index f991f669047e..a53e982a6863 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -906,21 +906,34 @@ static int esw_inline_mode_to_devlink(u8 mlx5_mode, u8 *mode) return 0; } -int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode) +static int mlx5_devlink_eswitch_check(struct devlink *devlink) { - struct mlx5_core_dev *dev; - u16 cur_mlx5_mode, mlx5_mode = 0; + struct mlx5_core_dev *dev = devlink_priv(devlink); - dev = devlink_priv(devlink); + if (MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH) + return -EOPNOTSUPP; if (!MLX5_CAP_GEN(dev, vport_group_manager)) return -EOPNOTSUPP; - cur_mlx5_mode = dev->priv.eswitch->mode; - - if (cur_mlx5_mode == SRIOV_NONE) + if (dev->priv.eswitch->mode == SRIOV_NONE) return -EOPNOTSUPP; + return 0; +} + +int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode) +{ + struct mlx5_core_dev *dev = devlink_priv(devlink); + u16 cur_mlx5_mode, mlx5_mode = 0; + int err; + + err = mlx5_devlink_eswitch_check(devlink); + if (err) + return err; + + cur_mlx5_mode = dev->priv.eswitch->mode; + if (esw_mode_from_devlink(mode, &mlx5_mode)) return -EINVAL; @@ -937,15 +950,12 @@ int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode) int mlx5_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode) { - struct mlx5_core_dev *dev; + struct mlx5_core_dev *dev = devlink_priv(devlink); + int err; - dev = devlink_priv(devlink); - - if (!MLX5_CAP_GEN(dev, vport_group_manager)) - return -EOPNOTSUPP; - - if (dev->priv.eswitch->mode == SRIOV_NONE) - return -EOPNOTSUPP; + err = mlx5_devlink_eswitch_check(devlink); + if (err) + return err; return esw_mode_to_devlink(dev->priv.eswitch->mode, mode); } @@ -954,15 +964,12 @@ int mlx5_devlink_eswitch_inline_mode_set(struct devlink *devlink, u8 mode) { struct mlx5_core_dev *dev = devlink_priv(devlink); struct mlx5_eswitch *esw = dev->priv.eswitch; - int num_vports = esw->enabled_vports; int err, vport; u8 mlx5_mode; - if (!MLX5_CAP_GEN(dev, vport_group_manager)) - return -EOPNOTSUPP; - - if (esw->mode == SRIOV_NONE) - return -EOPNOTSUPP; + err = mlx5_devlink_eswitch_check(devlink); + if (err) + return err; switch (MLX5_CAP_ETH(dev, wqe_inline_mode)) { case MLX5_CAP_INLINE_MODE_NOT_REQUIRED: @@ -985,7 +992,7 @@ int mlx5_devlink_eswitch_inline_mode_set(struct devlink *devlink, u8 mode) if (err) goto out; - for (vport = 1; vport < num_vports; vport++) { + for (vport = 1; vport < esw->enabled_vports; vport++) { err = mlx5_modify_nic_vport_min_inline(dev, vport, mlx5_mode); if (err) { esw_warn(dev, "Failed to set min inline on vport %d\n", @@ -1010,12 +1017,11 @@ int mlx5_devlink_eswitch_inline_mode_get(struct devlink *devlink, u8 *mode) { struct mlx5_core_dev *dev = devlink_priv(devlink); struct mlx5_eswitch *esw = dev->priv.eswitch; + int err; - if (!MLX5_CAP_GEN(dev, vport_group_manager)) - return -EOPNOTSUPP; - - if (esw->mode == SRIOV_NONE) - return -EOPNOTSUPP; + err = mlx5_devlink_eswitch_check(devlink); + if (err) + return err; return esw_inline_mode_to_devlink(esw->offloads.inline_mode, mode); } @@ -1062,11 +1068,9 @@ int mlx5_devlink_eswitch_encap_mode_set(struct devlink *devlink, u8 encap) struct mlx5_eswitch *esw = dev->priv.eswitch; int err; - if (!MLX5_CAP_GEN(dev, vport_group_manager)) - return -EOPNOTSUPP; - - if (esw->mode == SRIOV_NONE) - return -EOPNOTSUPP; + err = mlx5_devlink_eswitch_check(devlink); + if (err) + return err; if (encap != DEVLINK_ESWITCH_ENCAP_MODE_NONE && (!MLX5_CAP_ESW_FLOWTABLE_FDB(dev, encap) || @@ -1105,12 +1109,11 @@ int mlx5_devlink_eswitch_encap_mode_get(struct devlink *devlink, u8 *encap) { struct mlx5_core_dev *dev = devlink_priv(devlink); struct mlx5_eswitch *esw = dev->priv.eswitch; + int err; - if (!MLX5_CAP_GEN(dev, vport_group_manager)) - return -EOPNOTSUPP; - - if (esw->mode == SRIOV_NONE) - return -EOPNOTSUPP; + err = mlx5_devlink_eswitch_check(devlink); + if (err) + return err; *encap = esw->offloads.encap; return 0; From 9cfb4f719264f3eeb68122371ad70fd5bf2e10bb Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 11 Jun 2017 19:32:12 +0300 Subject: [PATCH 0866/1065] net/mlx5e: Remove TC header re-write offloading of ip tos Currently the firmware API is partial and allows to offload only the dscp part of the tos, also, ipv6 support isn't there yet. As such, remove the offloading option of ipv4 dscp till the FW APIs are more comprehensive. Fixes: d79b6df6b10a ('net/mlx5e: Add parsing of TC pedit actions to HW format') Signed-off-by: Or Gerlitz Reviewed-by: Paul Blakey Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index ec63158ab643..9df9fc0d26f5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -895,7 +895,6 @@ static struct mlx5_fields fields[] = { {MLX5_ACTION_IN_FIELD_OUT_SMAC_15_0, 2, offsetof(struct pedit_headers, eth.h_source[4])}, {MLX5_ACTION_IN_FIELD_OUT_ETHERTYPE, 2, offsetof(struct pedit_headers, eth.h_proto)}, - {MLX5_ACTION_IN_FIELD_OUT_IP_DSCP, 1, offsetof(struct pedit_headers, ip4.tos)}, {MLX5_ACTION_IN_FIELD_OUT_IP_TTL, 1, offsetof(struct pedit_headers, ip4.ttl)}, {MLX5_ACTION_IN_FIELD_OUT_SIPV4, 4, offsetof(struct pedit_headers, ip4.saddr)}, {MLX5_ACTION_IN_FIELD_OUT_DIPV4, 4, offsetof(struct pedit_headers, ip4.daddr)}, From 31ac93386d135a6c96de9c8bab406f5ccabf5a4d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 15 Jun 2017 20:08:32 +0300 Subject: [PATCH 0867/1065] net/mlx5e: Avoid doing a cleanup call if the profile doesn't have it The error flow of mlx5e_create_netdev calls the cleanup call of the given profile without checking if it exists, fix that. Currently the VF reps don't register that callback and we crash if getting into error -- can be reproduced by the user doing ctrl^C while attempting to change the sriov mode from legacy to switchdev. Fixes: 26e59d8077a3 '(net/mlx5e: Implement mlx5e interface attach/detach callbacks') Signed-off-by: Or Gerlitz Reported-by: Sabrina Dubroca Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 41cd22a223dc..277f4de30375 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -4241,7 +4241,8 @@ struct net_device *mlx5e_create_netdev(struct mlx5_core_dev *mdev, return netdev; err_cleanup_nic: - profile->cleanup(priv); + if (profile->cleanup) + profile->cleanup(priv); free_netdev(netdev); return NULL; From 91ebcd1b97aea87172e8ae8871f1f328b9fa9c05 Mon Sep 17 00:00:00 2001 From: Aurelien Jacquiot Date: Thu, 15 Jun 2017 11:41:17 +0200 Subject: [PATCH 0868/1065] MAINTAINERS: update email address for C6x maintainer Aurelien has moved. Signed-off-by: Aurelien Jacquiot Signed-off-by: Mark Salter --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 38d3e4ed7208..5714bc7f6fe7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2945,7 +2945,7 @@ F: sound/pci/oxygen/ C6X ARCHITECTURE M: Mark Salter -M: Aurelien Jacquiot +M: Aurelien Jacquiot L: linux-c6x-dev@linux-c6x.org W: http://www.linux-c6x.org/wiki/index.php/Main_Page S: Maintained From 7ceaa6dcd8c6f59588428cec37f3c8093dd1011f Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 16 Jun 2017 11:53:19 +1000 Subject: [PATCH 0869/1065] KVM: PPC: Book3S HV: Save/restore host values of debug registers At present, HV KVM on POWER8 and POWER9 machines loses any instruction or data breakpoint set in the host whenever a guest is run. Instruction breakpoints are currently only used by xmon, but ptrace and the perf_event subsystem can set data breakpoints as well as xmon. To fix this, we save the host values of the debug registers (CIABR, DAWR and DAWRX) before entering the guest and restore them on exit. To provide space to save them in the stack frame, we expand the stack frame allocated by kvmppc_hv_entry() from 112 to 144 bytes. Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 45 ++++++++++++++++++------- 1 file changed, 32 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 4e4390564276..4888dd494604 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -44,6 +44,17 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) #define NAPPING_CEDE 1 #define NAPPING_NOVCPU 2 +/* Stack frame offsets for kvmppc_hv_entry */ +#define SFS 144 +#define STACK_SLOT_TRAP (SFS-4) +#define STACK_SLOT_TID (SFS-16) +#define STACK_SLOT_PSSCR (SFS-24) +#define STACK_SLOT_PID (SFS-32) +#define STACK_SLOT_IAMR (SFS-40) +#define STACK_SLOT_CIABR (SFS-48) +#define STACK_SLOT_DAWR (SFS-56) +#define STACK_SLOT_DAWRX (SFS-64) + /* * Call kvmppc_hv_entry in real mode. * Must be called with interrupts hard-disabled. @@ -328,10 +339,10 @@ kvm_novcpu_exit: bl kvmhv_accumulate_time #endif 13: mr r3, r12 - stw r12, 112-4(r1) + stw r12, STACK_SLOT_TRAP(r1) bl kvmhv_commence_exit nop - lwz r12, 112-4(r1) + lwz r12, STACK_SLOT_TRAP(r1) b kvmhv_switch_to_host /* @@ -554,12 +565,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) * * *****************************************************************************/ -/* Stack frame offsets */ -#define STACK_SLOT_TID (112-16) -#define STACK_SLOT_PSSCR (112-24) -#define STACK_SLOT_PID (112-32) -#define STACK_SLOT_IAMR (112-40) - .global kvmppc_hv_entry kvmppc_hv_entry: @@ -575,7 +580,7 @@ kvmppc_hv_entry: */ mflr r0 std r0, PPC_LR_STKOFF(r1) - stdu r1, -112(r1) + stdu r1, -SFS(r1) /* Save R1 in the PACA */ std r1, HSTATE_HOST_R1(r13) @@ -765,6 +770,14 @@ BEGIN_FTR_SECTION std r7, STACK_SLOT_PID(r1) std r8, STACK_SLOT_IAMR(r1) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) +BEGIN_FTR_SECTION + mfspr r5, SPRN_CIABR + mfspr r6, SPRN_DAWR + mfspr r7, SPRN_DAWRX + std r5, STACK_SLOT_CIABR(r1) + std r6, STACK_SLOT_DAWR(r1) + std r7, STACK_SLOT_DAWRX(r1) +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) BEGIN_FTR_SECTION /* Set partition DABR */ @@ -1518,8 +1531,6 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300) * set by the guest could disrupt the host. */ li r0, 0 - mtspr SPRN_CIABR, r0 - mtspr SPRN_DAWRX, r0 mtspr SPRN_PSPB, r0 mtspr SPRN_WORT, r0 BEGIN_FTR_SECTION @@ -1684,6 +1695,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) ptesync /* Restore host values of some registers */ +BEGIN_FTR_SECTION + ld r5, STACK_SLOT_CIABR(r1) + ld r6, STACK_SLOT_DAWR(r1) + ld r7, STACK_SLOT_DAWRX(r1) + mtspr SPRN_CIABR, r5 + mtspr SPRN_DAWR, r6 + mtspr SPRN_DAWRX, r7 +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) BEGIN_FTR_SECTION ld r5, STACK_SLOT_TID(r1) ld r6, STACK_SLOT_PSSCR(r1) @@ -1836,8 +1855,8 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX) li r0, KVM_GUEST_MODE_NONE stb r0, HSTATE_IN_GUEST(r13) - ld r0, 112+PPC_LR_STKOFF(r1) - addi r1, r1, 112 + ld r0, SFS+PPC_LR_STKOFF(r1) + addi r1, r1, SFS mtlr r0 blr From 3d3efb68c19e539f0535c93a5258c1299270215f Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 6 Jun 2017 14:35:30 +1000 Subject: [PATCH 0870/1065] KVM: PPC: Book3S HV: Ignore timebase offset on POWER9 DD1 POWER9 DD1 has an erratum where writing to the TBU40 register, which is used to apply an offset to the timebase, can cause the timebase to lose counts. This results in the timebase on some CPUs getting out of sync with other CPUs, which then results in misbehaviour of the timekeeping code. To work around the problem, we make KVM ignore the timebase offset for all guests on POWER9 DD1 machines. This means that live migration cannot be supported on POWER9 DD1 machines. Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_hv.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index fd4d978d5257..8d1a365b8edc 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -1486,6 +1486,14 @@ static int kvmppc_set_one_reg_hv(struct kvm_vcpu *vcpu, u64 id, r = set_vpa(vcpu, &vcpu->arch.dtl, addr, len); break; case KVM_REG_PPC_TB_OFFSET: + /* + * POWER9 DD1 has an erratum where writing TBU40 causes + * the timebase to lose ticks. So we don't let the + * timebase offset be changed on P9 DD1. (It is + * initialized to zero.) + */ + if (cpu_has_feature(CPU_FTR_POWER9_DD1)) + break; /* round up to multiple of 2^24 */ vcpu->arch.vcore->tb_offset = ALIGN(set_reg_val(id, *val), 1UL << 24); From a093c92dc7f96a15de98ec8cfe38e6f7610a5969 Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Wed, 14 Jun 2017 13:01:25 +1000 Subject: [PATCH 0871/1065] powerpc/debug: Add missing warn flag to WARN_ON's non-builtin path When trapped on WARN_ON(), report_bug() is expected to return BUG_TRAP_TYPE_WARN so the caller will increment NIP by 4 and continue. The __builtin_constant_p() path of the PPC's WARN_ON() calls (indirectly) __WARN_FLAGS() which has BUGFLAG_WARNING set, however the other branch does not which makes report_bug() report a bug rather than a warning. Fixes: f26dee15103f ("debug: Avoid setting BUGFLAG_WARNING twice") Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/bug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h index f2c562a0a427..0151af6c2a50 100644 --- a/arch/powerpc/include/asm/bug.h +++ b/arch/powerpc/include/asm/bug.h @@ -104,7 +104,7 @@ "1: "PPC_TLNEI" %4,0\n" \ _EMIT_BUG_ENTRY \ : : "i" (__FILE__), "i" (__LINE__), \ - "i" (BUGFLAG_TAINT(TAINT_WARN)), \ + "i" (BUGFLAG_WARNING|BUGFLAG_TAINT(TAINT_WARN)),\ "i" (sizeof(struct bug_entry)), \ "r" (__ret_warn_on)); \ } \ From 92b0a1416be587b87c8ff489b6a74fd929048ca7 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 15 Jun 2017 08:20:35 -0500 Subject: [PATCH 0872/1065] objtool: Add fortify_panic as __noreturn function CONFIG_FORTIFY_SOURCE=y implements fortify_panic() as a __noreturn function, so objtool needs to know about it too. Suggested-by: Daniel Micay Tested-by: Stephen Rothwell Signed-off-by: Kees Cook Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1497532835-32704-1-git-send-email-jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- tools/objtool/builtin-check.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c index 282a60368b14..5f66697fe1e0 100644 --- a/tools/objtool/builtin-check.c +++ b/tools/objtool/builtin-check.c @@ -192,7 +192,8 @@ static int __dead_end_function(struct objtool_file *file, struct symbol *func, "complete_and_exit", "kvm_spurious_fault", "__reiserfs_panic", - "lbug_with_loc" + "lbug_with_loc", + "fortify_panic", }; if (func->bind == STB_WEAK) From 35abcd4f9f303ac4f10f99b3f7e993e5f2e6fa37 Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Fri, 16 Jun 2017 09:36:35 +0100 Subject: [PATCH 0873/1065] brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2() This fixes the following warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c: In function 'brcmf_usb_probe_phase2': drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1198:2: warning: 'devinfo' may be used uninitialized in this function [-Wmaybe-uninitialized] mutex_unlock(&devinfo->dev_init_lock); Fixes: 6d0507a777fb ("brcmfmac: add parameter to pass error code in firmware callback") Cc: Stephen Rothwell Reported-by: Kalle Valo Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c index 9ce3b55c3ffe..0eea48e73331 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c @@ -1164,14 +1164,13 @@ static void brcmf_usb_probe_phase2(struct device *dev, int ret, void *nvram, u32 nvlen) { struct brcmf_bus *bus = dev_get_drvdata(dev); - struct brcmf_usbdev_info *devinfo; + struct brcmf_usbdev_info *devinfo = bus->bus_priv.usb->devinfo; if (ret) goto error; brcmf_dbg(USB, "Start fw downloading\n"); - devinfo = bus->bus_priv.usb->devinfo; ret = check_file(fw->data); if (ret < 0) { brcmf_err("invalid firmware\n"); From 20223f0f39ea9d31ece08f04ac79f8c4e8d98246 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 16 Jun 2017 11:08:24 +0200 Subject: [PATCH 0874/1065] fs: pass on flags in compat_writev Fixes: 793b80ef14af ("vfs: pass a flags argument to vfs_readv/vfs_writev") Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- fs/read_write.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/read_write.c b/fs/read_write.c index 47c1d4484df9..19d4d88fa285 100644 --- a/fs/read_write.c +++ b/fs/read_write.c @@ -1285,7 +1285,7 @@ static size_t compat_writev(struct file *file, if (!(file->f_mode & FMODE_CAN_WRITE)) goto out; - ret = compat_do_readv_writev(WRITE, file, vec, vlen, pos, 0); + ret = compat_do_readv_writev(WRITE, file, vec, vlen, pos, flags); out: if (ret > 0) From a9f8553e935f26cb5447f67e280946b0923cd2dc Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Thu, 1 Jun 2017 16:18:15 +0530 Subject: [PATCH 0875/1065] powerpc/kprobes: Pause function_graph tracing during jprobes handling This fixes a crash when function_graph and jprobes are used together. This is essentially commit 237d28db036e ("ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing"), but for powerpc. Jprobes breaks function_graph tracing since the jprobe hook needs to use jprobe_return(), which never returns back to the hook, but instead to the original jprobe'd function. The solution is to momentarily pause function_graph tracing before invoking the jprobe hook and re-enable it when returning back to the original jprobe'd function. Fixes: 6794c78243bf ("powerpc64: port of the function graph tracer") Cc: stable@vger.kernel.org # v2.6.30+ Signed-off-by: Naveen N. Rao Acked-by: Masami Hiramatsu Acked-by: Steven Rostedt (VMware) Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/kprobes.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index fc4343514bed..5075a4d6f1d7 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -617,6 +617,15 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc); #endif + /* + * jprobes use jprobe_return() which skips the normal return + * path of the function, and this messes up the accounting of the + * function graph tracer. + * + * Pause function graph tracing while performing the jprobe function. + */ + pause_graph_tracing(); + return 1; } NOKPROBE_SYMBOL(setjmp_pre_handler); @@ -642,6 +651,8 @@ int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) * saved regs... */ memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs)); + /* It's OK to start function graph tracing again */ + unpause_graph_tracing(); preempt_enable_no_resched(); return 1; } From a4979a7e71eb8da976cbe4a0a1fa50636e76b04f Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Thu, 1 Jun 2017 16:18:16 +0530 Subject: [PATCH 0876/1065] powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS For DYNAMIC_FTRACE_WITH_REGS, we should be passing-in the original set of registers in pt_regs, to capture the state _before_ ftrace_caller. However, we are instead passing the stack pointer *after* allocating a stack frame in ftrace_caller. Fix this by saving the proper value of r1 in pt_regs. Also, use SAVE_10GPRS() to simplify the code. Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Naveen N. Rao Signed-off-by: Michael Ellerman --- .../powerpc/kernel/trace/ftrace_64_mprofile.S | 20 +++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S index 7c933a99f5d5..fa0921410fa4 100644 --- a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S +++ b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S @@ -45,10 +45,14 @@ _GLOBAL(ftrace_caller) stdu r1,-SWITCH_FRAME_SIZE(r1) /* Save all gprs to pt_regs */ - SAVE_8GPRS(0,r1) - SAVE_8GPRS(8,r1) - SAVE_8GPRS(16,r1) - SAVE_8GPRS(24,r1) + SAVE_GPR(0, r1) + SAVE_10GPRS(2, r1) + SAVE_10GPRS(12, r1) + SAVE_10GPRS(22, r1) + + /* Save previous stack pointer (r1) */ + addi r8, r1, SWITCH_FRAME_SIZE + std r8, GPR1(r1) /* Load special regs for save below */ mfmsr r8 @@ -103,10 +107,10 @@ ftrace_call: #endif /* Restore gprs */ - REST_8GPRS(0,r1) - REST_8GPRS(8,r1) - REST_8GPRS(16,r1) - REST_8GPRS(24,r1) + REST_GPR(0,r1) + REST_10GPRS(2,r1) + REST_10GPRS(12,r1) + REST_10GPRS(22,r1) /* Restore possibly modified LR */ ld r0, _LINK(r1) From c05b8c4474c03026aaa7f8872e78369f69f1bb08 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Thu, 1 Jun 2017 16:18:17 +0530 Subject: [PATCH 0877/1065] powerpc/kprobes: Skip livepatch_handler() for jprobes ftrace_caller() depends on a modified regs->nip to detect if a certain function has been livepatched. However, with KPROBES_ON_FTRACE, it is possible for regs->nip to have been modified by the kprobes pre_handler (jprobes, for instance). In this case, we do not want to invoke the livepatch_handler so as not to consume the livepatch stack. To distinguish between the two (kprobes and livepatch), we check if there is an active kprobe on the current function. If there is, then we know for sure that it must have modified the NIP as we don't support livepatching a kprobe'd function. In this case, we simply skip the livepatch_handler and branch to the new NIP. Otherwise, the livepatch_handler is invoked. Fixes: ead514d5fb30 ("powerpc/kprobes: Add support for KPROBES_ON_FTRACE") Signed-off-by: Naveen N. Rao Reviewed-by: Masami Hiramatsu Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/kprobes.h | 1 + arch/powerpc/kernel/kprobes.c | 6 +++ .../powerpc/kernel/trace/ftrace_64_mprofile.S | 39 ++++++++++++++++--- 3 files changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h index a83821f33ea3..8814a7249ceb 100644 --- a/arch/powerpc/include/asm/kprobes.h +++ b/arch/powerpc/include/asm/kprobes.h @@ -103,6 +103,7 @@ extern int kprobe_exceptions_notify(struct notifier_block *self, extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); extern int kprobe_handler(struct pt_regs *regs); extern int kprobe_post_handler(struct pt_regs *regs); +extern int is_current_kprobe_addr(unsigned long addr); #ifdef CONFIG_KPROBES_ON_FTRACE extern int skip_singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb); diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 5075a4d6f1d7..01addfb0ed0a 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -43,6 +43,12 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); struct kretprobe_blackpoint kretprobe_blacklist[] = {{NULL, NULL}}; +int is_current_kprobe_addr(unsigned long addr) +{ + struct kprobe *p = kprobe_running(); + return (p && (unsigned long)p->addr == addr) ? 1 : 0; +} + bool arch_within_kprobe_blacklist(unsigned long addr) { return (addr >= (unsigned long)__kprobes_text_start && diff --git a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S index fa0921410fa4..c98e90b4ea7b 100644 --- a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S +++ b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S @@ -99,13 +99,39 @@ ftrace_call: bl ftrace_stub nop - /* Load ctr with the possibly modified NIP */ - ld r3, _NIP(r1) - mtctr r3 + /* Load the possibly modified NIP */ + ld r15, _NIP(r1) + #ifdef CONFIG_LIVEPATCH - cmpd r14,r3 /* has NIP been altered? */ + cmpd r14, r15 /* has NIP been altered? */ #endif +#if defined(CONFIG_LIVEPATCH) && defined(CONFIG_KPROBES_ON_FTRACE) + /* NIP has not been altered, skip over further checks */ + beq 1f + + /* Check if there is an active kprobe on us */ + subi r3, r14, 4 + bl is_current_kprobe_addr + nop + + /* + * If r3 == 1, then this is a kprobe/jprobe. + * else, this is livepatched function. + * + * The conditional branch for livepatch_handler below will use the + * result of this comparison. For kprobe/jprobe, we just need to branch to + * the new NIP, not call livepatch_handler. The branch below is bne, so we + * want CR0[EQ] to be true if this is a kprobe/jprobe. Which means we want + * CR0[EQ] = (r3 == 1). + */ + cmpdi r3, 1 +1: +#endif + + /* Load CTR with the possibly modified NIP */ + mtctr r15 + /* Restore gprs */ REST_GPR(0,r1) REST_10GPRS(2,r1) @@ -123,7 +149,10 @@ ftrace_call: addi r1, r1, SWITCH_FRAME_SIZE #ifdef CONFIG_LIVEPATCH - /* Based on the cmpd above, if the NIP was altered handle livepatch */ + /* + * Based on the cmpd or cmpdi above, if the NIP was altered and we're + * not on a kprobe/jprobe, then handle livepatch. + */ bne- livepatch_handler #endif From d89ba5353f301971dd7d2f9fdf25c4432728f38e Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Wed, 14 Jun 2017 00:12:00 +0530 Subject: [PATCH 0878/1065] powerpc/64s: Handle data breakpoints in Radix mode On Power9, trying to use data breakpoints throws the splat shown below. This is because the check for a data breakpoint in DSISR is in do_hash_page(), which is not called when in Radix mode. Unable to handle kernel paging request for data at address 0xc000000000e19218 Faulting instruction address: 0xc0000000001155e8 cpu 0x0: Vector: 300 (Data Access) at [c0000000ef1e7b20] pc: c0000000001155e8: find_pid_ns+0x48/0xe0 lr: c000000000116ac4: find_task_by_vpid+0x44/0x90 sp: c0000000ef1e7da0 msr: 9000000000009033 dar: c000000000e19218 dsisr: 400000 Move the check to handle_page_fault() so as to catch data breakpoints in both Hash and Radix MMU modes. We have to change the check in do_hash_page() against 0xa410 to use 0xa450, so as to include the value of (DSISR_DABRMATCH << 16). There are two sites that call handle_page_fault() when in Radix, both already pass DSISR in r4. Fixes: caca285e5ab4 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code") Cc: stable@vger.kernel.org # v4.7+ Reported-by: Shriya R. Kulkarni Signed-off-by: Naveen N. Rao [mpe: Fix the fall-through case on hash, we need to reload DSISR] Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/exceptions-64s.S | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index ae418b85c17c..b886795060fd 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1411,10 +1411,8 @@ USE_TEXT_SECTION() .balign IFETCH_ALIGN_BYTES do_hash_page: #ifdef CONFIG_PPC_STD_MMU_64 - andis. r0,r4,0xa410 /* weird error? */ + andis. r0,r4,0xa450 /* weird error? */ bne- handle_page_fault /* if not, try to insert a HPTE */ - andis. r0,r4,DSISR_DABRMATCH@h - bne- handle_dabr_fault CURRENT_THREAD_INFO(r11, r1) lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */ andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */ @@ -1438,11 +1436,16 @@ do_hash_page: /* Error */ blt- 13f + + /* Reload DSISR into r4 for the DABR check below */ + ld r4,_DSISR(r1) #endif /* CONFIG_PPC_STD_MMU_64 */ /* Here we have a page fault that hash_page can't handle. */ handle_page_fault: -11: ld r4,_DAR(r1) +11: andis. r0,r4,DSISR_DABRMATCH@h + bne- handle_dabr_fault + ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD bl do_page_fault From bf05fc25f268cd62f147f368fe65ad3e5b04fe9f Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Thu, 15 Jun 2017 19:16:48 +0530 Subject: [PATCH 0879/1065] powerpc/perf: Fix oops when kthread execs user process When a kthread calls call_usermodehelper() the steps are: 1. allocate current->mm 2. load_elf_binary() 3. populate current->thread.regs While doing this, interrupts are not disabled. If there is a perf interrupt in the middle of this process (i.e. step 1 has completed but not yet reached to step 3) and if perf tries to read userspace regs, kernel oops with following log: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000000da0fc ... Call Trace: perf_output_sample_regs+0x6c/0xd0 perf_output_sample+0x4e4/0x830 perf_event_output_forward+0x64/0x90 __perf_event_overflow+0x8c/0x1e0 record_and_restart+0x220/0x5c0 perf_event_interrupt+0x2d8/0x4d0 performance_monitor_exception+0x54/0x70 performance_monitor_common+0x158/0x160 --- interrupt: f01 at avtab_search_node+0x150/0x1a0 LR = avtab_search_node+0x100/0x1a0 ... load_elf_binary+0x6e8/0x15a0 search_binary_handler+0xe8/0x290 do_execveat_common.isra.14+0x5f4/0x840 call_usermodehelper_exec_async+0x170/0x210 ret_from_kernel_thread+0x5c/0x7c Fix it by setting abi to PERF_SAMPLE_REGS_ABI_NONE when userspace pt_regs are not set. Fixes: ed4a4ef85cf5 ("powerpc/perf: Add support for sampling interrupt register state") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Ravi Bangoria Acked-by: Naveen N. Rao Signed-off-by: Michael Ellerman --- arch/powerpc/perf/perf_regs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/perf/perf_regs.c b/arch/powerpc/perf/perf_regs.c index cbd82fde5770..09ceea6175ba 100644 --- a/arch/powerpc/perf/perf_regs.c +++ b/arch/powerpc/perf/perf_regs.c @@ -101,5 +101,6 @@ void perf_get_regs_user(struct perf_regs *regs_user, struct pt_regs *regs_user_copy) { regs_user->regs = task_pt_regs(current); - regs_user->abi = perf_reg_abi(current); + regs_user->abi = (regs_user->regs) ? perf_reg_abi(current) : + PERF_SAMPLE_REGS_ABI_NONE; } From 469f87e158628fe66dcbbce9dd5e7b7acfe934a9 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Thu, 15 Jun 2017 10:29:29 +0800 Subject: [PATCH 0880/1065] ip_tunnel: fix potential issue in ip_tunnel_rcv When ip_tunnel_rcv fails, the tun_dst won't be freed, so call dst_release to free it in error code path. Fixes: 2e15ea390e6f ("ip_gre: Add support to collect tunnel metadata.") Acked-by: Eric Dumazet Acked-by: Pravin B Shelar Tested-by: Zhang Shengju Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index b436d0775631..129d1a3616f8 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -446,6 +446,8 @@ int ip_tunnel_rcv(struct ip_tunnel *tunnel, struct sk_buff *skb, return 0; drop: + if (tun_dst) + dst_release((struct dst_entry *)tun_dst); kfree_skb(skb); return 0; } From f1925ca50deb48eddafc01bc12c2a17bfbf54425 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Thu, 15 Jun 2017 10:29:30 +0800 Subject: [PATCH 0881/1065] ip6_tunnel: fix potential issue in __ip6_tnl_rcv When __ip6_tnl_rcv fails, the tun_dst won't be freed, so call dst_release to free it in error code path. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") CC: Alexei Starovoitov Tested-by: Zhang Shengju Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index c3581973f5d7..035c0496b92a 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -858,6 +858,8 @@ static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb, return 0; drop: + if (tun_dst) + dst_release((struct dst_entry *)tun_dst); kfree_skb(skb); return 0; } From 9126cbbacecb8917bd0418809ef1d26616b2061e Mon Sep 17 00:00:00 2001 From: Milian Wolff Date: Fri, 2 Jun 2017 16:37:53 +0200 Subject: [PATCH 0882/1065] perf unwind: Report module before querying isactivation in dwfl unwind The PC returned by dwfl_frame_pc() may map into a not-yet-reported module. We have to report it before we continue unwinding. But when we query for the isactivation flag in dwfl_frame_pc, libdw will actually do one more unwinding step internally which can then break and lead to missed frames or broken stacks. With libunwind we get e.g.: ~~~~~ heaptrack_gui 2228 135073.400474: 613969 cycles: 108c8e [unknown] (/usr/lib/libQt5Core.so.5.8.0) 1093bc [unknown] (/usr/lib/libQt5Core.so.5.8.0) 109e7b QLocale::QLocale (/usr/lib/libQt5Core.so.5.8.0) 1470ff [unknown] (/usr/lib/libQt5Core.so.5.8.0) 147f67 QSystemLocale::query (/usr/lib/libQt5Core.so.5.8.0) 109fbf QLocalePrivate::updateSystemPrivate (/usr/lib/libQt5Core.so.5.8.0) 10aa27 QLocale::QLocale (/usr/lib/libQt5Core.so.5.8.0) 1e02c3 [unknown] (/usr/lib/libQt5Core.so.5.8.0) 2113bb [unknown] (/usr/lib/libQt5Core.so.5.8.0) 211505 [unknown] (/usr/lib/libQt5Core.so.5.8.0) 1b5df0 QFileInfo::exists (/usr/lib/libQt5Core.so.5.8.0) 92eb2 [unknown] (/usr/lib/libQt5Core.so.5.8.0) 93423 [unknown] (/usr/lib/libQt5Core.so.5.8.0) 93d2a QLibraryInfo::location (/usr/lib/libQt5Core.so.5.8.0) 2170af [unknown] (/usr/lib/libQt5Core.so.5.8.0) 297c53 QCoreApplicationPrivate::init (/usr/lib/libQt5Core.so.5.8.0) f7cde QGuiApplicationPrivate::init (/usr/lib/libQt5Gui.so.5.8.0) 1589e8 QApplicationPrivate::init (/usr/lib/libQt5Widgets.so.5.8.0) 78622 main (/home/milian/projects/compiled/other/bin/heaptrack_gui) 20439 __libc_start_main (/usr/lib/libc-2.25.so) 78299 _start (/home/milian/projects/compiled/other/bin/heaptrack_gui) heaptrack_gui 2228 135073.401156: 569521 cycles: 131633 QString::endsWith (/usr/lib/libQt5Core.so.5.8.0) 1a0701 QDir::cleanPath (/usr/lib/libQt5Core.so.5.8.0) 21b82d [unknown] (/usr/lib/libQt5Core.so.5.8.0) 1b3727 QFileInfo::canonicalFilePath (/usr/lib/libQt5Core.so.5.8.0) 2780c7 QFactoryLoader::update (/usr/lib/libQt5Core.so.5.8.0) 279525 QFactoryLoader::QFactoryLoader (/usr/lib/libQt5Core.so.5.8.0) e5bd0 QPlatformIntegrationFactory::create (/usr/lib/libQt5Gui.so.5.8.0) f5a1c QGuiApplicationPrivate::createPlatformIntegration (/usr/lib/libQt5Gui.so.5.8.0) f650c QGuiApplicationPrivate::createEventDispatcher (/usr/lib/libQt5Gui.so.5.8.0) 298524 QCoreApplicationPrivate::init (/usr/lib/libQt5Core.so.5.8.0) f7cde QGuiApplicationPrivate::init (/usr/lib/libQt5Gui.so.5.8.0) 1589e8 QApplicationPrivate::init (/usr/lib/libQt5Widgets.so.5.8.0) 78622 main (/home/milian/projects/compiled/other/bin/heaptrack_gui) 20439 __libc_start_main (/usr/lib/libc-2.25.so) 78299 _start (/home/milian/projects/compiled/other/bin/heaptrack_gui) ~~~~~ Note the two frames 1589e8 and 78622 in the first sample. These are missing when unwinding with libdw. The second sample's breakage is more obvious: ~~~~~ heaptrack_gui 2228 135073.400474: 613969 cycles: 108c8e [unknown] (/usr/lib/libQt5Core.so.5.8.0) 1093bc [unknown] (/usr/lib/libQt5Core.so.5.8.0) 109e7b QLocale::QLocale (/usr/lib/libQt5Core.so.5.8.0) 1470ff [unknown] (/usr/lib/libQt5Core.so.5.8.0) 147f67 QSystemLocale::query (/usr/lib/libQt5Core.so.5.8.0) 109fbf QLocalePrivate::updateSystemPrivate (/usr/lib/libQt5Core.so.5.8.0) 10aa27 QLocale::QLocale (/usr/lib/libQt5Core.so.5.8.0) 1e02c3 [unknown] (/usr/lib/libQt5Core.so.5.8.0) 2113bb [unknown] (/usr/lib/libQt5Core.so.5.8.0) 211505 [unknown] (/usr/lib/libQt5Core.so.5.8.0) 1b5df0 QFileInfo::exists (/usr/lib/libQt5Core.so.5.8.0) 92eb2 [unknown] (/usr/lib/libQt5Core.so.5.8.0) 93423 [unknown] (/usr/lib/libQt5Core.so.5.8.0) 93d2a QLibraryInfo::location (/usr/lib/libQt5Core.so.5.8.0) 2170af [unknown] (/usr/lib/libQt5Core.so.5.8.0) 297c53 QCoreApplicationPrivate::init (/usr/lib/libQt5Core.so.5.8.0) f7cde QGuiApplicationPrivate::init (/usr/lib/libQt5Gui.so.5.8.0) 20439 __libc_start_main (/usr/lib/libc-2.25.so) 78299 _start (/home/milian/projects/compiled/other/bin/heaptrack_gui) heaptrack_gui 2228 135073.401156: 569521 cycles: 131633 QString::endsWith (/usr/lib/libQt5Core.so.5.8.0) 1a0701 QDir::cleanPath (/usr/lib/libQt5Core.so.5.8.0) 21b82d [unknown] (/usr/lib/libQt5Core.so.5.8.0) 1b3727 QFileInfo::canonicalFilePath (/usr/lib/libQt5Core.so.5.8.0) 2780c7 QFactoryLoader::update (/usr/lib/libQt5Core.so.5.8.0) 279525 QFactoryLoader::QFactoryLoader (/usr/lib/libQt5Core.so.5.8.0) e5bd0 QPlatformIntegrationFactory::create (/usr/lib/libQt5Gui.so.5.8.0) 723dbf [unknown] ([unknown]) ~~~~~ This patch fixes this issue and the libdw unwinder mimicks the libunwind behavior more closely. Signed-off-by: Milian Wolff Acked-by: Jan Kratochvil Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20170602143753.16907-2-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/unwind-libdw.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/perf/util/unwind-libdw.c b/tools/perf/util/unwind-libdw.c index da45c4be5fb3..7755a5e0fe5e 100644 --- a/tools/perf/util/unwind-libdw.c +++ b/tools/perf/util/unwind-libdw.c @@ -178,6 +178,14 @@ frame_callback(Dwfl_Frame *state, void *arg) Dwarf_Addr pc; bool isactivation; + if (!dwfl_frame_pc(state, &pc, NULL)) { + pr_err("%s", dwfl_errmsg(-1)); + return DWARF_CB_ABORT; + } + + // report the module before we query for isactivation + report_module(pc, ui); + if (!dwfl_frame_pc(state, &pc, &isactivation)) { pr_err("%s", dwfl_errmsg(-1)); return DWARF_CB_ABORT; From 76371d2e3ad1f84426a30ebcd8c3b9b98f4c724f Mon Sep 17 00:00:00 2001 From: Wei Wang Date: Fri, 16 Jun 2017 10:46:37 -0700 Subject: [PATCH 0883/1065] decnet: always not take dst->__refcnt when inserting dst into hash table In the existing dn_route.c code, dn_route_output_slow() takes dst->__refcnt before calling dn_insert_route() while dn_route_input_slow() does not take dst->__refcnt before calling dn_insert_route(). This makes the whole routing code very buggy. In dn_dst_check_expire(), dnrt_free() is called when rt expires. This makes the routes inserted by dn_route_output_slow() not able to be freed as the refcnt is not released. In dn_dst_gc(), dnrt_drop() is called to release rt which could potentially cause the dst->__refcnt to be dropped to -1. In dn_run_flush(), dst_free() is called to release all the dst. Again, it makes the dst inserted by dn_route_output_slow() not able to be released and also, it does not wait on the rcu and could potentially cause crash in the path where other users still refer to this dst. This patch makes sure both input and output path do not take dst->__refcnt before calling dn_insert_route() and also makes sure dnrt_free()/dst_free() is called when removing dst from the hash table. The only difference between those 2 calls is that dnrt_free() waits on the rcu while dst_free() does not. Signed-off-by: Wei Wang Acked-by: Martin KaFai Lau Signed-off-by: David S. Miller --- net/decnet/dn_route.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c index 4b9518a0d248..6f95612b4d32 100644 --- a/net/decnet/dn_route.c +++ b/net/decnet/dn_route.c @@ -188,12 +188,6 @@ static inline void dnrt_free(struct dn_route *rt) call_rcu_bh(&rt->dst.rcu_head, dst_rcu_free); } -static inline void dnrt_drop(struct dn_route *rt) -{ - dst_release(&rt->dst); - call_rcu_bh(&rt->dst.rcu_head, dst_rcu_free); -} - static void dn_dst_check_expire(unsigned long dummy) { int i; @@ -248,7 +242,7 @@ static int dn_dst_gc(struct dst_ops *ops) } *rtp = rt->dst.dn_next; rt->dst.dn_next = NULL; - dnrt_drop(rt); + dnrt_free(rt); break; } spin_unlock_bh(&dn_rt_hash_table[i].lock); @@ -350,7 +344,7 @@ static int dn_insert_route(struct dn_route *rt, unsigned int hash, struct dn_rou dst_use(&rth->dst, now); spin_unlock_bh(&dn_rt_hash_table[hash].lock); - dnrt_drop(rt); + dst_free(&rt->dst); *rp = rth; return 0; } @@ -380,7 +374,7 @@ static void dn_run_flush(unsigned long dummy) for(; rt; rt = next) { next = rcu_dereference_raw(rt->dst.dn_next); RCU_INIT_POINTER(rt->dst.dn_next, NULL); - dst_free((struct dst_entry *)rt); + dnrt_free(rt); } nothing_to_declare: @@ -1187,7 +1181,7 @@ make_route: if (dev_out->flags & IFF_LOOPBACK) flags |= RTCF_LOCAL; - rt = dst_alloc(&dn_dst_ops, dev_out, 1, DST_OBSOLETE_NONE, DST_HOST); + rt = dst_alloc(&dn_dst_ops, dev_out, 0, DST_OBSOLETE_NONE, DST_HOST); if (rt == NULL) goto e_nobufs; From 7258ae5c5a2ce2f5969e8b18b881be40ab55433d Mon Sep 17 00:00:00 2001 From: James Morse Date: Fri, 16 Jun 2017 14:02:29 -0700 Subject: [PATCH 0884/1065] mm/memory-failure.c: use compound_head() flags for huge pages memory_failure() chooses a recovery action function based on the page flags. For huge pages it uses the tail page flags which don't have anything interesting set, resulting in: > Memory failure: 0x9be3b4: Unknown page state > Memory failure: 0x9be3b4: recovery action for unknown page: Failed Instead, save a copy of the head page's flags if this is a huge page, this means if there are no relevant flags for this tail page, we use the head pages flags instead. This results in the me_huge_page() recovery action being called: > Memory failure: 0x9b7969: recovery action for huge page: Delayed For hugepages that have not yet been allocated, this allows the hugepage to be dequeued. Fixes: 524fca1e7356 ("HWPOISON: fix misjudgement of page_action() for errors on mlocked pages") Link: http://lkml.kernel.org/r/20170524130204.21845-1-james.morse@arm.com Signed-off-by: James Morse Tested-by: Punit Agrawal Acked-by: Punit Agrawal Acked-by: Naoya Horiguchi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 342fac9ba89b..ecc183fd94f3 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1184,7 +1184,10 @@ int memory_failure(unsigned long pfn, int trapno, int flags) * page_remove_rmap() in try_to_unmap_one(). So to determine page status * correctly, we save a copy of the page flags at this time. */ - page_flags = p->flags; + if (PageHuge(p)) + page_flags = hpage->flags; + else + page_flags = p->flags; /* * unpoison always clear PG_hwpoison inside page lock From ef70762948dde012146926720b70e79736336764 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Fri, 16 Jun 2017 14:02:31 -0700 Subject: [PATCH 0885/1065] swap: cond_resched in swap_cgroup_prepare() I saw need_resched() warnings when swapping on large swapfile (TBs) because continuously allocating many pages in swap_cgroup_prepare() took too long. We already cond_resched when freeing page in swap_cgroup_swapoff(). Do the same for the page allocation. Link: http://lkml.kernel.org/r/20170604200109.17606-1-yuzhao@google.com Signed-off-by: Yu Zhao Acked-by: Michal Hocko Acked-by: Vladimir Davydov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swap_cgroup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/swap_cgroup.c b/mm/swap_cgroup.c index ac6318a064d3..3405b4ee1757 100644 --- a/mm/swap_cgroup.c +++ b/mm/swap_cgroup.c @@ -48,6 +48,9 @@ static int swap_cgroup_prepare(int type) if (!page) goto not_enough_page; ctrl->map[idx] = page; + + if (!(idx % SWAP_CLUSTER_MAX)) + cond_resched(); } return 0; not_enough_page: From 3c226c637b69104f6b9f1c6ec5b08d7b741b3229 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 16 Jun 2017 14:02:34 -0700 Subject: [PATCH 0886/1065] mm: numa: avoid waiting on freed migrated pages In do_huge_pmd_numa_page(), we attempt to handle a migrating thp pmd by waiting until the pmd is unlocked before we return and retry. However, we can race with migrate_misplaced_transhuge_page(): // do_huge_pmd_numa_page // migrate_misplaced_transhuge_page() // Holds 0 refs on page // Holds 2 refs on page vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd); /* ... */ if (pmd_trans_migrating(*vmf->pmd)) { page = pmd_page(*vmf->pmd); spin_unlock(vmf->ptl); ptl = pmd_lock(mm, pmd); if (page_count(page) != 2)) { /* roll back */ } /* ... */ mlock_migrate_page(new_page, page); /* ... */ spin_unlock(ptl); put_page(page); put_page(page); // page freed here wait_on_page_locked(page); goto out; } This can result in the freed page having its waiters flag set unexpectedly, which trips the PAGE_FLAGS_CHECK_AT_PREP checks in the page alloc/free functions. This has been observed on arm64 KVM guests. We can avoid this by having do_huge_pmd_numa_page() take a reference on the page before dropping the pmd lock, mirroring what we do in __migration_entry_wait(). When we hit the race, migrate_misplaced_transhuge_page() will see the reference and abort the migration, as it may do today in other cases. Fixes: b8916634b77bffb2 ("mm: Prevent parallel splits during THP migration") Link: http://lkml.kernel.org/r/1497349722-6731-2-git-send-email-will.deacon@arm.com Signed-off-by: Mark Rutland Signed-off-by: Will Deacon Acked-by: Steve Capper Acked-by: Kirill A. Shutemov Acked-by: Vlastimil Babka Cc: Mel Gorman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index a84909cf20d3..88c6167f194d 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1426,8 +1426,11 @@ int do_huge_pmd_numa_page(struct vm_fault *vmf, pmd_t pmd) */ if (unlikely(pmd_trans_migrating(*vmf->pmd))) { page = pmd_page(*vmf->pmd); + if (!get_page_unless_zero(page)) + goto out_unlock; spin_unlock(vmf->ptl); wait_on_page_locked(page); + put_page(page); goto out; } @@ -1459,9 +1462,12 @@ int do_huge_pmd_numa_page(struct vm_fault *vmf, pmd_t pmd) /* Migration could have started since the pmd_trans_migrating check */ if (!page_locked) { + page_nid = -1; + if (!get_page_unless_zero(page)) + goto out_unlock; spin_unlock(vmf->ptl); wait_on_page_locked(page); - page_nid = -1; + put_page(page); goto out; } From 64c2b20301f62c697352c8028c569b1b2bdd8e82 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 16 Jun 2017 14:02:37 -0700 Subject: [PATCH 0887/1065] userfaultfd: shmem: handle coredumping in handle_userfault() Anon and hugetlbfs handle FOLL_DUMP set by get_dump_page() internally to __get_user_pages(). shmem as opposed has no special FOLL_DUMP handling there so handle_mm_fault() is invoked without mmap_sem and ends up calling handle_userfault() that isn't expecting to be invoked without mmap_sem held. This makes handle_userfault() fail immediately if invoked through shmem_vm_ops->fault during coredumping and solves the problem. The side effect is a BUG_ON with no lock held triggered by the coredumping process which exits. Only 4.11 is affected, pre-4.11 anon memory holes are skipped in __get_user_pages by checking FOLL_DUMP explicitly against empty pagetables (mm/gup.c:no_page_table()). It's zero cost as we already had a check for current->flags to prevent futex to trigger userfaults during exit (PF_EXITING). Link: http://lkml.kernel.org/r/20170615214838.27429-1-aarcange@redhat.com Signed-off-by: Andrea Arcangeli Reported-by: "Dr. David Alan Gilbert" Cc: [4.11+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/userfaultfd.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index f7555fc25877..1d622f276e3a 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -340,9 +340,28 @@ int handle_userfault(struct vm_fault *vmf, unsigned long reason) bool must_wait, return_to_userland; long blocking_state; - BUG_ON(!rwsem_is_locked(&mm->mmap_sem)); - ret = VM_FAULT_SIGBUS; + + /* + * We don't do userfault handling for the final child pid update. + * + * We also don't do userfault handling during + * coredumping. hugetlbfs has the special + * follow_hugetlb_page() to skip missing pages in the + * FOLL_DUMP case, anon memory also checks for FOLL_DUMP with + * the no_page_table() helper in follow_page_mask(), but the + * shmem_vm_ops->fault method is invoked even during + * coredumping without mmap_sem and it ends up here. + */ + if (current->flags & (PF_EXITING|PF_DUMPCORE)) + goto out; + + /* + * Coredumping runs without mmap_sem so we can only check that + * the mmap_sem is held, if PF_DUMPCORE was not set. + */ + WARN_ON_ONCE(!rwsem_is_locked(&mm->mmap_sem)); + ctx = vmf->vma->vm_userfaultfd_ctx.ctx; if (!ctx) goto out; @@ -360,12 +379,6 @@ int handle_userfault(struct vm_fault *vmf, unsigned long reason) if (unlikely(ACCESS_ONCE(ctx->released))) goto out; - /* - * We don't do userfault handling for the final child pid update. - */ - if (current->flags & PF_EXITING) - goto out; - /* * Check that we can return VM_FAULT_RETRY. * From d7143e31259cb029e207619209b31aa7520f8e28 Mon Sep 17 00:00:00 2001 From: zhongjiang Date: Fri, 16 Jun 2017 14:02:40 -0700 Subject: [PATCH 0888/1065] mm: correct the comment when reclaimed pages exceed the scanned pages Commit e1587a494540 ("mm: vmpressure: fix sending wrong events on underflow") declared that reclaimed pages exceed the scanned pages due to the thp reclaim. That is incorrect because THP will be spilt to normal page and loop again, which will result in the scanned pages increment. [akpm@linux-foundation.org: tweak comment text] Link: http://lkml.kernel.org/r/1496824266-25235-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhongjiang Acked-by: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmpressure.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/vmpressure.c b/mm/vmpressure.c index 6063581f705c..ce0618bfa8d0 100644 --- a/mm/vmpressure.c +++ b/mm/vmpressure.c @@ -115,9 +115,9 @@ static enum vmpressure_levels vmpressure_calc_level(unsigned long scanned, unsigned long pressure = 0; /* - * reclaimed can be greater than scanned in cases - * like THP, where the scanned is 1 and reclaimed - * could be 512 + * reclaimed can be greater than scanned for things such as reclaimed + * slab pages. shrink_node() just adds reclaimed pages without a + * related increment to scanned pages. */ if (reclaimed >= scanned) goto out; From 23ac7cba73bb2c6e80f9cdebeb39dc3dad34ebb3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 16 Jun 2017 23:49:17 -0400 Subject: [PATCH 0889/1065] fix signedness of timestamps on ufs1 Signed-off-by: Al Viro --- fs/ufs/inode.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index 9f4590261134..7b1b810a8ab1 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -578,9 +578,9 @@ static int ufs1_read_inode(struct inode *inode, struct ufs_inode *ufs_inode) i_gid_write(inode, ufs_get_inode_gid(sb, ufs_inode)); inode->i_size = fs64_to_cpu(sb, ufs_inode->ui_size); - inode->i_atime.tv_sec = fs32_to_cpu(sb, ufs_inode->ui_atime.tv_sec); - inode->i_ctime.tv_sec = fs32_to_cpu(sb, ufs_inode->ui_ctime.tv_sec); - inode->i_mtime.tv_sec = fs32_to_cpu(sb, ufs_inode->ui_mtime.tv_sec); + inode->i_atime.tv_sec = (signed)fs32_to_cpu(sb, ufs_inode->ui_atime.tv_sec); + inode->i_ctime.tv_sec = (signed)fs32_to_cpu(sb, ufs_inode->ui_ctime.tv_sec); + inode->i_mtime.tv_sec = (signed)fs32_to_cpu(sb, ufs_inode->ui_mtime.tv_sec); inode->i_mtime.tv_nsec = 0; inode->i_atime.tv_nsec = 0; inode->i_ctime.tv_nsec = 0; From c0ef65d2928249e822b813beb41b6c1478c556ab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 16 Jun 2017 23:54:47 -0400 Subject: [PATCH 0890/1065] ufs_iget(): fail with -ESTALE on deleted inode Signed-off-by: Al Viro --- fs/ufs/inode.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c index 7b1b810a8ab1..f36d6a53687d 100644 --- a/fs/ufs/inode.c +++ b/fs/ufs/inode.c @@ -566,10 +566,8 @@ static int ufs1_read_inode(struct inode *inode, struct ufs_inode *ufs_inode) */ inode->i_mode = mode = fs16_to_cpu(sb, ufs_inode->ui_mode); set_nlink(inode, fs16_to_cpu(sb, ufs_inode->ui_nlink)); - if (inode->i_nlink == 0) { - ufs_error (sb, "ufs_read_inode", "inode %lu has zero nlink\n", inode->i_ino); - return -1; - } + if (inode->i_nlink == 0) + return -ESTALE; /* * Linux now has 32-bit uid and gid, so we can support EFT. @@ -614,10 +612,8 @@ static int ufs2_read_inode(struct inode *inode, struct ufs2_inode *ufs2_inode) */ inode->i_mode = mode = fs16_to_cpu(sb, ufs2_inode->ui_mode); set_nlink(inode, fs16_to_cpu(sb, ufs2_inode->ui_nlink)); - if (inode->i_nlink == 0) { - ufs_error (sb, "ufs_read_inode", "inode %lu has zero nlink\n", inode->i_ino); - return -1; - } + if (inode->i_nlink == 0) + return -ESTALE; /* * Linux now has 32-bit uid and gid, so we can support EFT. @@ -657,7 +653,7 @@ struct inode *ufs_iget(struct super_block *sb, unsigned long ino) struct ufs_sb_private_info *uspi = UFS_SB(sb)->s_uspi; struct buffer_head * bh; struct inode *inode; - int err; + int err = -EIO; UFSD("ENTER, ino %lu\n", ino); @@ -692,9 +688,10 @@ struct inode *ufs_iget(struct super_block *sb, unsigned long ino) err = ufs1_read_inode(inode, ufs_inode + ufs_inotofsbo(inode->i_ino)); } - + brelse(bh); if (err) goto bad_inode; + inode->i_version++; ufsi->i_lastfrag = (inode->i_size + uspi->s_fsize - 1) >> uspi->s_fshift; @@ -703,15 +700,13 @@ struct inode *ufs_iget(struct super_block *sb, unsigned long ino) ufs_set_inode_ops(inode); - brelse(bh); - UFSD("EXIT\n"); unlock_new_inode(inode); return inode; bad_inode: iget_failed(inode); - return ERR_PTR(-EIO); + return ERR_PTR(err); } static void ufs1_update_inode(struct inode *inode, struct ufs_inode *ufs_inode) From 57db7e4a2d92c2d3dfbca4ef8057849b2682436b Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 13 Jun 2017 04:31:16 -0500 Subject: [PATCH 0891/1065] signal: Only reschedule timers on signals timers have sent Thomas Gleixner wrote: > The CRIU support added a 'feature' which allows a user space task to send > arbitrary (kernel) signals to itself. The changelog says: > > The kernel prevents sending of siginfo with positive si_code, because > these codes are reserved for kernel. I think we can allow a task to > send such a siginfo to itself. This operation should not be dangerous. > > Quite contrary to that claim, it turns out that it is outright dangerous > for signals with info->si_code == SI_TIMER. The following code sequence in > a user space task allows to crash the kernel: > > id = timer_create(CLOCK_XXX, ..... signo = SIGX); > timer_set(id, ....); > info->si_signo = SIGX; > info->si_code = SI_TIMER: > info->_sifields._timer._tid = id; > info->_sifields._timer._sys_private = 2; > rt_[tg]sigqueueinfo(..., SIGX, info); > sigemptyset(&sigset); > sigaddset(&sigset, SIGX); > rt_sigtimedwait(sigset, info); > > For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this > results in a kernel crash because sigwait() dequeues the signal and the > dequeue code observes: > > info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0 > > which triggers the following callchain: > > do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer() > > arm_timer() executes a list_add() on the timer, which is already armed via > the timer_set() syscall. That's a double list add which corrupts the posix > cpu timer list. As a consequence the kernel crashes on the next operation > touching the posix cpu timer list. > > Posix clocks which are internally implemented based on hrtimers are not > affected by this because hrtimer_start() can handle already armed timers > nicely, but it's a reliable way to trigger the WARN_ON() in > hrtimer_forward(), which complains about calling that function on an > already armed timer. This problem has existed since the posix timer code was merged into 2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to inject not just a signal (which linux has supported since 1.0) but the full siginfo of a signal. The core problem is that the code will reschedule in response to signals getting dequeued not just for signals the timers sent but for other signals that happen to a si_code of SI_TIMER. Avoid this confusion by testing to see if the queued signal was preallocated as all timer signals are preallocated, and so far only the timer code preallocates signals. Move the check for if a timer needs to be rescheduled up into collect_signal where the preallocation check must be performed, and pass the result back to dequeue_signal where the code reschedules timers. This makes it clear why the code cares about preallocated timers. Cc: stable@vger.kernel.org Reported-by: Thomas Gleixner History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself") Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO") Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers") Signed-off-by: "Eric W. Biederman" --- kernel/signal.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/kernel/signal.c b/kernel/signal.c index ca92bcfeb322..45b4c1ffe14e 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -510,7 +510,8 @@ int unhandled_signal(struct task_struct *tsk, int sig) return !tsk->ptrace; } -static void collect_signal(int sig, struct sigpending *list, siginfo_t *info) +static void collect_signal(int sig, struct sigpending *list, siginfo_t *info, + bool *resched_timer) { struct sigqueue *q, *first = NULL; @@ -532,6 +533,12 @@ static void collect_signal(int sig, struct sigpending *list, siginfo_t *info) still_pending: list_del_init(&first->list); copy_siginfo(info, &first->info); + + *resched_timer = + (first->flags & SIGQUEUE_PREALLOC) && + (info->si_code == SI_TIMER) && + (info->si_sys_private); + __sigqueue_free(first); } else { /* @@ -548,12 +555,12 @@ still_pending: } static int __dequeue_signal(struct sigpending *pending, sigset_t *mask, - siginfo_t *info) + siginfo_t *info, bool *resched_timer) { int sig = next_signal(pending, mask); if (sig) - collect_signal(sig, pending, info); + collect_signal(sig, pending, info, resched_timer); return sig; } @@ -565,15 +572,16 @@ static int __dequeue_signal(struct sigpending *pending, sigset_t *mask, */ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) { + bool resched_timer = false; int signr; /* We only dequeue private signals from ourselves, we don't let * signalfd steal them */ - signr = __dequeue_signal(&tsk->pending, mask, info); + signr = __dequeue_signal(&tsk->pending, mask, info, &resched_timer); if (!signr) { signr = __dequeue_signal(&tsk->signal->shared_pending, - mask, info); + mask, info, &resched_timer); #ifdef CONFIG_POSIX_TIMERS /* * itimer signal ? @@ -621,7 +629,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) current->jobctl |= JOBCTL_STOP_DEQUEUED; } #ifdef CONFIG_POSIX_TIMERS - if ((info->si_code & __SI_MASK) == __SI_TIMER && info->si_sys_private) { + if (resched_timer) { /* * Release the siglock to ensure proper locking order * of timer locks outside of siglocks. Note, we leave From 77e9ce327d9b607cd6e57c0f4524a654dc59c4b1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 17 Jun 2017 15:44:06 -0400 Subject: [PATCH 0892/1065] ufs: fix the logics for tail relocation * original hysteresis loop got broken by typo back in 2002; now it never switches out of OPTTIME state. Fixed. * critical levels for switching from OPTTIME to OPTSPACE and back ought to be calculated once, at mount time. * we should use mul_u64_u32_div() for those calculations, now that ->s_dsize is 64bit. * to quote Kirk McKusick (in 1995 FreeBSD commit message): The threshold for switching from time-space and space-time is too small when minfree is 5%...so make it stay at space in this case. Signed-off-by: Al Viro --- fs/ufs/balloc.c | 22 ++++++---------------- fs/ufs/super.c | 9 +++++++++ fs/ufs/ufs_fs.h | 2 ++ 3 files changed, 17 insertions(+), 16 deletions(-) diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c index 0315fea1d589..f80be4c5df9d 100644 --- a/fs/ufs/balloc.c +++ b/fs/ufs/balloc.c @@ -455,24 +455,14 @@ u64 ufs_new_fragments(struct inode *inode, void *p, u64 fragment, /* * allocate new block and move data */ - switch (fs32_to_cpu(sb, usb1->fs_optim)) { - case UFS_OPTSPACE: + if (fs32_to_cpu(sb, usb1->fs_optim) == UFS_OPTSPACE) { request = newcount; - if (uspi->s_minfree < 5 || uspi->cs_total.cs_nffree - > uspi->s_dsize * uspi->s_minfree / (2 * 100)) - break; - usb1->fs_optim = cpu_to_fs32(sb, UFS_OPTTIME); - break; - default: - usb1->fs_optim = cpu_to_fs32(sb, UFS_OPTTIME); - - case UFS_OPTTIME: + if (uspi->cs_total.cs_nffree < uspi->s_space_to_time) + usb1->fs_optim = cpu_to_fs32(sb, UFS_OPTTIME); + } else { request = uspi->s_fpb; - if (uspi->cs_total.cs_nffree < uspi->s_dsize * - (uspi->s_minfree - 2) / 100) - break; - usb1->fs_optim = cpu_to_fs32(sb, UFS_OPTTIME); - break; + if (uspi->cs_total.cs_nffree > uspi->s_time_to_space) + usb1->fs_optim = cpu_to_fs32(sb, UFS_OPTSPACE); } result = ufs_alloc_fragments (inode, cgno, goal, request, err); if (result) { diff --git a/fs/ufs/super.c b/fs/ufs/super.c index 34656c7a8e22..f211b662dd92 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -1211,6 +1211,15 @@ magic_found: uspi->s_root_blocks = mul_u64_u32_div(uspi->s_dsize, uspi->s_minfree, 100); + if (uspi->s_minfree <= 5) { + uspi->s_time_to_space = ~0ULL; + uspi->s_space_to_time = 0; + usb1->fs_optim = cpu_to_fs32(sb, UFS_OPTSPACE); + } else { + uspi->s_time_to_space = (uspi->s_root_blocks / 2) + 1; + uspi->s_space_to_time = mul_u64_u32_div(uspi->s_dsize, + uspi->s_minfree - 2, 100) - 1; + } /* * Compute another frequently used values diff --git a/fs/ufs/ufs_fs.h b/fs/ufs/ufs_fs.h index 823d55a37586..150eef6f1233 100644 --- a/fs/ufs/ufs_fs.h +++ b/fs/ufs/ufs_fs.h @@ -792,6 +792,8 @@ struct ufs_sb_private_info { __s32 fs_magic; /* filesystem magic */ unsigned int s_dirblksize; __u64 s_root_blocks; + __u64 s_time_to_space; + __u64 s_space_to_time; }; /* From e41b1355508debe45fda33ef8c03ff3ba5d206b9 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Tue, 13 Jun 2017 20:56:44 +0300 Subject: [PATCH 0893/1065] virtio_balloon: disable VIOMMU support virtio balloon bypasses the DMA API entirely so does not support the VIOMMU right now. It's not clear we need that support, for now let's just make sure we don't pretend to support it. Cc: stable@vger.kernel.org Cc: Wei Wang Fixes: 1a937693993f ("virtio: new feature to detect IOMMU device quirk") Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/virtio/virtio_balloon.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 408c174ef0d5..22caf808bfab 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -663,6 +663,12 @@ static int virtballoon_restore(struct virtio_device *vdev) } #endif +static int virtballoon_validate(struct virtio_device *vdev) +{ + __virtio_clear_bit(vdev, VIRTIO_F_IOMMU_PLATFORM); + return 0; +} + static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST, VIRTIO_BALLOON_F_STATS_VQ, @@ -675,6 +681,7 @@ static struct virtio_driver virtio_balloon_driver = { .driver.name = KBUILD_MODNAME, .driver.owner = THIS_MODULE, .id_table = id_table, + .validate = virtballoon_validate, .probe = virtballoon_probe, .remove = virtballoon_remove, .config_changed = virtballoon_changed, From 779f19ac9d5858a2c159030c0c166f7da46b74ae Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 18 Jun 2017 15:10:26 -0700 Subject: [PATCH 0894/1065] Input: soc_button_array - fix leaking the ACPI button descriptor buffer We are passing a buffer with ACPI_ALLOCATE_BUFFER set to acpi_evaluate_object, so we must free it when we are done with it. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/misc/soc_button_array.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index e37d37273182..f600f3a7a3c6 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -248,7 +248,8 @@ static struct soc_button_info *soc_button_get_button_info(struct device *dev) if (!btns_desc) { dev_err(dev, "ACPI Button Descriptors not found\n"); - return ERR_PTR(-ENODEV); + button_info = ERR_PTR(-ENODEV); + goto out; } /* The first package describes the collection */ @@ -264,24 +265,31 @@ static struct soc_button_info *soc_button_get_button_info(struct device *dev) } if (collection_uid == -1) { dev_err(dev, "Invalid Button Collection Descriptor\n"); - return ERR_PTR(-ENODEV); + button_info = ERR_PTR(-ENODEV); + goto out; } /* There are package.count - 1 buttons + 1 terminating empty entry */ button_info = devm_kcalloc(dev, btns_desc->package.count, sizeof(*button_info), GFP_KERNEL); - if (!button_info) - return ERR_PTR(-ENOMEM); + if (!button_info) { + button_info = ERR_PTR(-ENOMEM); + goto out; + } /* Parse the button descriptors */ for (i = 1, btn = 0; i < btns_desc->package.count; i++, btn++) { if (soc_button_parse_btn_desc(dev, &btns_desc->package.elements[i], collection_uid, - &button_info[btn])) - return ERR_PTR(-ENODEV); + &button_info[btn])) { + button_info = ERR_PTR(-ENODEV); + goto out; + } } +out: + kfree(buf.pointer); return button_info; } From 46f8cd9d2fc1e4e8b82b53a0007f6c92e80c930b Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Sat, 17 Jun 2017 11:38:05 +0800 Subject: [PATCH 0895/1065] ip6_tunnel: Correct tos value in collect_md mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Same as ip_gre, geneve and vxlan, use key->tos as traffic class value. CC: Peter Dawson Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets”) Signed-off-by: Haishuang Yan Acked-by: Peter Dawson Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 035c0496b92a..8c6c3c8e7eef 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1248,7 +1248,7 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) fl6.flowi6_proto = IPPROTO_IPIP; fl6.daddr = key->u.ipv6.dst; fl6.flowlabel = key->label; - dsfield = ip6_tclass(key->label); + dsfield = key->tos; } else { if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT)) encap_limit = t->parms.encap_limit; @@ -1319,7 +1319,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) fl6.flowi6_proto = IPPROTO_IPV6; fl6.daddr = key->u.ipv6.dst; fl6.flowlabel = key->label; - dsfield = ip6_tclass(key->label); + dsfield = key->tos; } else { offset = ip6_tnl_parse_tlv_enc_lim(skb, skb_network_header(skb)); /* ip6_tnl_parse_tlv_enc_lim() might have reallocated skb->head */ From a21ef715fbb8210c50b1d684145f8acdf2339596 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 15 Jun 2017 14:11:29 +0100 Subject: [PATCH 0896/1065] drm/i915: Differentiate between sw write location into ring and last hw read We need to keep track of the last location we ask the hw to read up to (RING_TAIL) separately from our last write location into the ring, so that in the event of a GPU reset we do not tell the HW to proceed into a partially written request (which can happen if that request is waiting for an external signal before being executed). v2: Refactor intel_ring_reset() (Mika) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144 Testcase: igt/gem_exec_fence/await-hang Fixes: 821ed7df6e2a ("drm/i915: Update reset path to fix incomplete requests") Fixes: d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Mika Kuoppala Link: http://patchwork.freedesktop.org/patch/msgid/20170425130049.26147-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala (cherry picked from commit e6ba9992de6c63fe86c028b4876338e1cb7dac34) Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/20170615131129.3061-1-chris@chris-wilson.co.uk --- drivers/gpu/drm/i915/i915_gem_request.c | 2 +- drivers/gpu/drm/i915/i915_guc_submission.c | 4 +-- drivers/gpu/drm/i915/intel_lrc.c | 6 ++-- drivers/gpu/drm/i915/intel_ringbuffer.c | 41 ++++++++++++++-------- drivers/gpu/drm/i915/intel_ringbuffer.h | 19 ++++++++-- 5 files changed, 48 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_request.c b/drivers/gpu/drm/i915/i915_gem_request.c index 5ddbc9499775..a74d0ac737cb 100644 --- a/drivers/gpu/drm/i915/i915_gem_request.c +++ b/drivers/gpu/drm/i915/i915_gem_request.c @@ -623,7 +623,7 @@ i915_gem_request_alloc(struct intel_engine_cs *engine, * GPU processing the request, we never over-estimate the * position of the head. */ - req->head = req->ring->tail; + req->head = req->ring->emit; /* Check that we didn't interrupt ourselves with a new request */ GEM_BUG_ON(req->timeline->seqno != req->fence.seqno); diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c index 1642fff9cf13..ab5140ba108d 100644 --- a/drivers/gpu/drm/i915/i915_guc_submission.c +++ b/drivers/gpu/drm/i915/i915_guc_submission.c @@ -480,9 +480,7 @@ static void guc_wq_item_append(struct i915_guc_client *client, GEM_BUG_ON(freespace < wqi_size); /* The GuC firmware wants the tail index in QWords, not bytes */ - tail = rq->tail; - assert_ring_tail_valid(rq->ring, rq->tail); - tail >>= 3; + tail = intel_ring_set_tail(rq->ring, rq->tail) >> 3; GEM_BUG_ON(tail > WQ_RING_TAIL_MAX); /* For now workqueue item is 4 DWs; workqueue buffer is 2 pages. So we diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index dac4e003c1f3..62f44d3e7c43 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -326,8 +326,7 @@ static u64 execlists_update_context(struct drm_i915_gem_request *rq) rq->ctx->ppgtt ?: rq->i915->mm.aliasing_ppgtt; u32 *reg_state = ce->lrc_reg_state; - assert_ring_tail_valid(rq->ring, rq->tail); - reg_state[CTX_RING_TAIL+1] = rq->tail; + reg_state[CTX_RING_TAIL+1] = intel_ring_set_tail(rq->ring, rq->tail); /* True 32b PPGTT with dynamic page allocation: update PDP * registers and point the unallocated PDPs to scratch page. @@ -2036,8 +2035,7 @@ void intel_lr_context_resume(struct drm_i915_private *dev_priv) ce->state->obj->mm.dirty = true; i915_gem_object_unpin_map(ce->state->obj); - ce->ring->head = ce->ring->tail = 0; - intel_ring_update_space(ce->ring); + intel_ring_reset(ce->ring, 0); } } } diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 66a2b8b83972..513a0f4b469b 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -49,7 +49,7 @@ static int __intel_ring_space(int head, int tail, int size) void intel_ring_update_space(struct intel_ring *ring) { - ring->space = __intel_ring_space(ring->head, ring->tail, ring->size); + ring->space = __intel_ring_space(ring->head, ring->emit, ring->size); } static int @@ -774,8 +774,8 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) i915_gem_request_submit(request); - assert_ring_tail_valid(request->ring, request->tail); - I915_WRITE_TAIL(request->engine, request->tail); + I915_WRITE_TAIL(request->engine, + intel_ring_set_tail(request->ring, request->tail)); } static void i9xx_emit_breadcrumb(struct drm_i915_gem_request *req, u32 *cs) @@ -1316,11 +1316,23 @@ err: return PTR_ERR(addr); } +void intel_ring_reset(struct intel_ring *ring, u32 tail) +{ + GEM_BUG_ON(!list_empty(&ring->request_list)); + ring->tail = tail; + ring->head = tail; + ring->emit = tail; + intel_ring_update_space(ring); +} + void intel_ring_unpin(struct intel_ring *ring) { GEM_BUG_ON(!ring->vma); GEM_BUG_ON(!ring->vaddr); + /* Discard any unused bytes beyond that submitted to hw. */ + intel_ring_reset(ring, ring->tail); + if (i915_vma_is_map_and_fenceable(ring->vma)) i915_vma_unpin_iomap(ring->vma); else @@ -1562,8 +1574,9 @@ void intel_legacy_submission_resume(struct drm_i915_private *dev_priv) struct intel_engine_cs *engine; enum intel_engine_id id; + /* Restart from the beginning of the rings for convenience */ for_each_engine(engine, dev_priv, id) - engine->buffer->head = engine->buffer->tail; + intel_ring_reset(engine->buffer, 0); } static int ring_request_alloc(struct drm_i915_gem_request *request) @@ -1616,7 +1629,7 @@ static int wait_for_space(struct drm_i915_gem_request *req, int bytes) unsigned space; /* Would completion of this request free enough space? */ - space = __intel_ring_space(target->postfix, ring->tail, + space = __intel_ring_space(target->postfix, ring->emit, ring->size); if (space >= bytes) break; @@ -1641,8 +1654,8 @@ static int wait_for_space(struct drm_i915_gem_request *req, int bytes) u32 *intel_ring_begin(struct drm_i915_gem_request *req, int num_dwords) { struct intel_ring *ring = req->ring; - int remain_actual = ring->size - ring->tail; - int remain_usable = ring->effective_size - ring->tail; + int remain_actual = ring->size - ring->emit; + int remain_usable = ring->effective_size - ring->emit; int bytes = num_dwords * sizeof(u32); int total_bytes, wait_bytes; bool need_wrap = false; @@ -1678,17 +1691,17 @@ u32 *intel_ring_begin(struct drm_i915_gem_request *req, int num_dwords) if (unlikely(need_wrap)) { GEM_BUG_ON(remain_actual > ring->space); - GEM_BUG_ON(ring->tail + remain_actual > ring->size); + GEM_BUG_ON(ring->emit + remain_actual > ring->size); /* Fill the tail with MI_NOOP */ - memset(ring->vaddr + ring->tail, 0, remain_actual); - ring->tail = 0; + memset(ring->vaddr + ring->emit, 0, remain_actual); + ring->emit = 0; ring->space -= remain_actual; } - GEM_BUG_ON(ring->tail > ring->size - bytes); - cs = ring->vaddr + ring->tail; - ring->tail += bytes; + GEM_BUG_ON(ring->emit > ring->size - bytes); + cs = ring->vaddr + ring->emit; + ring->emit += bytes; ring->space -= bytes; GEM_BUG_ON(ring->space < 0); @@ -1699,7 +1712,7 @@ u32 *intel_ring_begin(struct drm_i915_gem_request *req, int num_dwords) int intel_ring_cacheline_align(struct drm_i915_gem_request *req) { int num_dwords = - (req->ring->tail & (CACHELINE_BYTES - 1)) / sizeof(uint32_t); + (req->ring->emit & (CACHELINE_BYTES - 1)) / sizeof(uint32_t); u32 *cs; if (num_dwords == 0) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index a82a0807f64d..f7144fe09613 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -145,6 +145,7 @@ struct intel_ring { u32 head; u32 tail; + u32 emit; int space; int size; @@ -488,6 +489,8 @@ intel_write_status_page(struct intel_engine_cs *engine, int reg, u32 value) struct intel_ring * intel_engine_create_ring(struct intel_engine_cs *engine, int size); int intel_ring_pin(struct intel_ring *ring, unsigned int offset_bias); +void intel_ring_reset(struct intel_ring *ring, u32 tail); +void intel_ring_update_space(struct intel_ring *ring); void intel_ring_unpin(struct intel_ring *ring); void intel_ring_free(struct intel_ring *ring); @@ -511,7 +514,7 @@ intel_ring_advance(struct drm_i915_gem_request *req, u32 *cs) * reserved for the command packet (i.e. the value passed to * intel_ring_begin()). */ - GEM_BUG_ON((req->ring->vaddr + req->ring->tail) != cs); + GEM_BUG_ON((req->ring->vaddr + req->ring->emit) != cs); } static inline u32 @@ -540,7 +543,19 @@ assert_ring_tail_valid(const struct intel_ring *ring, unsigned int tail) GEM_BUG_ON(tail >= ring->size); } -void intel_ring_update_space(struct intel_ring *ring); +static inline unsigned int +intel_ring_set_tail(struct intel_ring *ring, unsigned int tail) +{ + /* Whilst writes to the tail are strictly order, there is no + * serialisation between readers and the writers. The tail may be + * read by i915_gem_request_retire() just as it is being updated + * by execlists, as although the breadcrumb is complete, the context + * switch hasn't been seen. + */ + assert_ring_tail_valid(ring, tail); + ring->tail = tail; + return tail; +} void intel_engine_init_global_seqno(struct intel_engine_cs *engine, u32 seqno); From b8d5a9ccfba5fc084b50b00b9f5b587a8e64b72c Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 9 Jun 2017 12:03:46 +0100 Subject: [PATCH 0897/1065] drm/i915: Encourage our shrinker more when our shmemfs allocations fails Commit 24f8e00a8a2e ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") made the bold decision to try and avoid the oomkiller by reporting -ENOMEM to userspace if our allocation failed after attempting to free enough buffer objects. In short, it appears we were giving up too easily (even before we start wondering if one pass of reclaim is as strong as we would like). Part of the problem is that if we only shrink just enough pages for our expected allocation, the likelihood of those pages becoming available to us is less than 100% To counter-act that we ask for twice the number of pages to be made available. Furthermore, we allow the shrinker to pull pages from the active list in later passes. v2: Be a little more cautious in paging out gfx buffers, and leave that to a more balanced approach from shrink_slab(). Important when combined with "drm/i915: Start writeback from the shrinker" as anything shrunk is immediately swapped out and so should be more conservative. Fixes: 24f8e00a8a2e ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: Joonas Lahtinen Cc: Daniel Vetter Reviewed-by: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-1-chris@chris-wilson.co.uk (cherry picked from commit 4846bf0ca8cb4304dde6140eff33a92b3fe8ef24) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 50 +++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 462031cbd77f..c93f27b981f5 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2285,8 +2285,8 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) struct page *page; unsigned long last_pfn = 0; /* suppress gcc warning */ unsigned int max_segment; + gfp_t noreclaim; int ret; - gfp_t gfp; /* Assert that the object is not currently in any GPU domain. As it * wasn't in the GTT, there shouldn't be any way it could have been in @@ -2315,22 +2315,31 @@ rebuild_st: * Fail silently without starting the shrinker */ mapping = obj->base.filp->f_mapping; - gfp = mapping_gfp_constraint(mapping, ~(__GFP_IO | __GFP_RECLAIM)); - gfp |= __GFP_NORETRY | __GFP_NOWARN; + noreclaim = mapping_gfp_constraint(mapping, + ~(__GFP_IO | __GFP_RECLAIM)); + noreclaim |= __GFP_NORETRY | __GFP_NOWARN; + sg = st->sgl; st->nents = 0; for (i = 0; i < page_count; i++) { - page = shmem_read_mapping_page_gfp(mapping, i, gfp); - if (unlikely(IS_ERR(page))) { - i915_gem_shrink(dev_priv, - page_count, - I915_SHRINK_BOUND | - I915_SHRINK_UNBOUND | - I915_SHRINK_PURGEABLE); + const unsigned int shrink[] = { + I915_SHRINK_BOUND | I915_SHRINK_UNBOUND | I915_SHRINK_PURGEABLE, + 0, + }, *s = shrink; + gfp_t gfp = noreclaim; + + do { page = shmem_read_mapping_page_gfp(mapping, i, gfp); - } - if (unlikely(IS_ERR(page))) { - gfp_t reclaim; + if (likely(!IS_ERR(page))) + break; + + if (!*s) { + ret = PTR_ERR(page); + goto err_sg; + } + + i915_gem_shrink(dev_priv, 2 * page_count, *s++); + cond_resched(); /* We've tried hard to allocate the memory by reaping * our own buffer, now let the real VM do its job and @@ -2340,15 +2349,13 @@ rebuild_st: * defer the oom here by reporting the ENOMEM back * to userspace. */ - reclaim = mapping_gfp_mask(mapping); - reclaim |= __GFP_NORETRY; /* reclaim, but no oom */ - - page = shmem_read_mapping_page_gfp(mapping, i, reclaim); - if (IS_ERR(page)) { - ret = PTR_ERR(page); - goto err_sg; + if (!*s) { + /* reclaim and warn, but no oom */ + gfp = mapping_gfp_mask(mapping); + gfp |= __GFP_NORETRY; } - } + } while (1); + if (!i || sg->length >= max_segment || page_to_pfn(page) != last_pfn + 1) { @@ -4222,6 +4229,7 @@ i915_gem_object_create(struct drm_i915_private *dev_priv, u64 size) mapping = obj->base.filp->f_mapping; mapping_set_gfp_mask(mapping, mask); + GEM_BUG_ON(!(mapping_gfp_mask(mapping) & __GFP_RECLAIM)); i915_gem_object_init(obj, &i915_gem_object_ops); From ce2c58724f7d07e76dadfeba53d6877a9e67341d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 9 Jun 2017 12:03:47 +0100 Subject: [PATCH 0898/1065] drm/i915: Remove __GFP_NORETRY from our buffer allocator I tried __GFP_NORETRY in the belief that __GFP_RECLAIM was effective. It struggles with handling reclaim of our dirty buffers and relies on reclaim via kswapd. As a result, a single pass of direct reclaim is unreliable when i915 occupies the majority of available memory, and the only means of effectively waiting on kswapd to amke progress is by not setting the __GFP_NORETRY flag and lopping. That leaves us with the dilemma of invoking the oomkiller instead of propagating the allocation failure back to userspace where it can be handled more gracefully (one hopes). In the future we may have __GFP_MAYFAIL to allow repeats up until we genuinely run out of memory and the oomkiller would have been invoked. Until then, let the oomkiller wreck havoc. v2: Stop playing with side-effects of gfp flags and await __GFP_MAYFAIL v3: Update comments that direct reclaim only appears to be ignoring our dirty buffers! Fixes: 24f8e00a8a2e ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Testcase: igt/gem_tiled_swapping Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: Joonas Lahtinen Cc: Daniel Vetter Cc: Michal Hocko Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-2-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit eaf41801559a687cc7511c04dc712984765c9dd7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index c93f27b981f5..615f0a855222 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2352,7 +2352,20 @@ rebuild_st: if (!*s) { /* reclaim and warn, but no oom */ gfp = mapping_gfp_mask(mapping); - gfp |= __GFP_NORETRY; + + /* Our bo are always dirty and so we require + * kswapd to reclaim our pages (direct reclaim + * does not effectively begin pageout of our + * buffers on its own). However, direct reclaim + * only waits for kswapd when under allocation + * congestion. So as a result __GFP_RECLAIM is + * unreliable and fails to actually reclaim our + * dirty pages -- unless you try over and over + * again with !__GFP_NORETRY. However, we still + * want to fail this allocation rather than + * trigger the out-of-memory killer and for + * this we want the future __GFP_MAYFAIL. + */ } } while (1); From 17b206c27366f3cee816eaf86fafc6a11f628ecf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 1 Jun 2017 17:36:13 +0300 Subject: [PATCH 0899/1065] drm/i915: Fix deadlock witha the pipe A quirk during resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pass down the correct acquire context to the pipe A quirk load detect hack during display resume. Avoids deadlocking the entire thing. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170601143619.27840-2-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst (cherry picked from commit aecd36b8a16b2302b33f49ba3fa24c955f1e32f7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 96b0b01677e2..c27bc95d763c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -120,7 +120,8 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc, static void skylake_pfit_enable(struct intel_crtc *crtc); static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force); static void ironlake_pfit_enable(struct intel_crtc *crtc); -static void intel_modeset_setup_hw_state(struct drm_device *dev); +static void intel_modeset_setup_hw_state(struct drm_device *dev, + struct drm_modeset_acquire_ctx *ctx); static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc); struct intel_limit { @@ -3449,7 +3450,7 @@ __intel_display_resume(struct drm_device *dev, struct drm_crtc *crtc; int i, ret; - intel_modeset_setup_hw_state(dev); + intel_modeset_setup_hw_state(dev, ctx); i915_redisable_vga(to_i915(dev)); if (!state) @@ -15030,7 +15031,7 @@ int intel_modeset_init(struct drm_device *dev) intel_setup_outputs(dev_priv); drm_modeset_lock_all(dev); - intel_modeset_setup_hw_state(dev); + intel_modeset_setup_hw_state(dev, dev->mode_config.acquire_ctx); drm_modeset_unlock_all(dev); for_each_intel_crtc(dev, crtc) { @@ -15067,13 +15068,13 @@ int intel_modeset_init(struct drm_device *dev) return 0; } -static void intel_enable_pipe_a(struct drm_device *dev) +static void intel_enable_pipe_a(struct drm_device *dev, + struct drm_modeset_acquire_ctx *ctx) { struct intel_connector *connector; struct drm_connector_list_iter conn_iter; struct drm_connector *crt = NULL; struct intel_load_detect_pipe load_detect_temp; - struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx; int ret; /* We can't just switch on the pipe A, we need to set things up with a @@ -15145,7 +15146,8 @@ static bool has_pch_trancoder(struct drm_i915_private *dev_priv, (HAS_PCH_LPT_H(dev_priv) && pch_transcoder == TRANSCODER_A); } -static void intel_sanitize_crtc(struct intel_crtc *crtc) +static void intel_sanitize_crtc(struct intel_crtc *crtc, + struct drm_modeset_acquire_ctx *ctx) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); @@ -15201,7 +15203,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) * resume. Force-enable the pipe to fix this, the update_dpms * call below we restore the pipe to the right state, but leave * the required bits on. */ - intel_enable_pipe_a(dev); + intel_enable_pipe_a(dev, ctx); } /* Adjust the state of the output pipe according to whether we @@ -15505,7 +15507,8 @@ get_encoder_power_domains(struct drm_i915_private *dev_priv) * and sanitizes it to the current state */ static void -intel_modeset_setup_hw_state(struct drm_device *dev) +intel_modeset_setup_hw_state(struct drm_device *dev, + struct drm_modeset_acquire_ctx *ctx) { struct drm_i915_private *dev_priv = to_i915(dev); enum pipe pipe; @@ -15525,7 +15528,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev) for_each_pipe(dev_priv, pipe) { crtc = intel_get_crtc_for_pipe(dev_priv, pipe); - intel_sanitize_crtc(crtc); + intel_sanitize_crtc(crtc, ctx); intel_dump_pipe_config(crtc, crtc->config, "[setup_hw_state]"); } From b7f5dd36e0c5cb9ca1070a5e0f22f666bcff07ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 1 Jun 2017 17:36:14 +0300 Subject: [PATCH 0900/1065] drm/i915: Plumb the correct acquire ctx into intel_crtc_disable_noatomic() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If intel_crtc_disable_noatomic() were to ever get called during resume we'd end up deadlocking since resume has its own acqcuire_ctx but intel_crtc_disable_noatomic() still tries to use the mode_config.acquire_ctx. Pass down the correct acquire ctx from the top. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170601143619.27840-3-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst (cherry picked from commit da1d0e265535634bba80d44510b864c620549bee) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c27bc95d763c..9106ea32b048 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5826,7 +5826,8 @@ static void i9xx_crtc_disable(struct intel_crtc_state *old_crtc_state, intel_update_watermarks(intel_crtc); } -static void intel_crtc_disable_noatomic(struct drm_crtc *crtc) +static void intel_crtc_disable_noatomic(struct drm_crtc *crtc, + struct drm_modeset_acquire_ctx *ctx) { struct intel_encoder *encoder; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -5856,7 +5857,7 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc) return; } - state->acquire_ctx = crtc->dev->mode_config.acquire_ctx; + state->acquire_ctx = ctx; /* Everything's already locked, -EDEADLK can't happen. */ crtc_state = intel_atomic_get_crtc_state(state, intel_crtc); @@ -15193,7 +15194,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc, plane = crtc->plane; crtc->base.primary->state->visible = true; crtc->plane = !plane; - intel_crtc_disable_noatomic(&crtc->base); + intel_crtc_disable_noatomic(&crtc->base, ctx); crtc->plane = plane; } @@ -15209,7 +15210,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc, /* Adjust the state of the output pipe according to whether we * have active connectors/encoders. */ if (crtc->active && !intel_crtc_has_encoders(crtc)) - intel_crtc_disable_noatomic(&crtc->base); + intel_crtc_disable_noatomic(&crtc->base, ctx); if (crtc->active || HAS_GMCH_DISPLAY(dev_priv)) { /* From 1be7107fbe18eed3e319a6c3e83c78254b693acb Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 19 Jun 2017 04:03:24 -0700 Subject: [PATCH 0901/1065] mm: larger stack guard gap, between vmas Stack guard page is a useful feature to reduce a risk of stack smashing into a different mapping. We have been using a single page gap which is sufficient to prevent having stack adjacent to a different mapping. But this seems to be insufficient in the light of the stack usage in userspace. E.g. glibc uses as large as 64kB alloca() in many commonly used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX] which is 256kB or stack strings with MAX_ARG_STRLEN. This will become especially dangerous for suid binaries and the default no limit for the stack size limit because those applications can be tricked to consume a large portion of the stack and a single glibc call could jump over the guard page. These attacks are not theoretical, unfortunatelly. Make those attacks less probable by increasing the stack guard gap to 1MB (on systems with 4k pages; but make it depend on the page size because systems with larger base pages might cap stack allocations in the PAGE_SIZE units) which should cover larger alloca() and VLA stack allocations. It is obviously not a full fix because the problem is somehow inherent, but it should reduce attack space a lot. One could argue that the gap size should be configurable from userspace, but that can be done later when somebody finds that the new 1MB is wrong for some special case applications. For now, add a kernel command line option (stack_guard_gap) to specify the stack gap size (in page units). Implementation wise, first delete all the old code for stack guard page: because although we could get away with accounting one extra page in a stack vma, accounting a larger gap can break userspace - case in point, a program run with "ulimit -S -v 20000" failed when the 1MB gap was counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK and strict non-overcommit mode. Instead of keeping gap inside the stack vma, maintain the stack guard gap as a gap between vmas: using vm_start_gap() in place of vm_start (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few places which need to respect the gap - mainly arch_get_unmapped_area(), and and the vma tree's subtree_gap support for that. Original-patch-by: Oleg Nesterov Original-patch-by: Michal Hocko Signed-off-by: Hugh Dickins Acked-by: Michal Hocko Tested-by: Helge Deller # parisc Signed-off-by: Linus Torvalds --- .../admin-guide/kernel-parameters.txt | 7 + arch/arc/mm/mmap.c | 2 +- arch/arm/mm/mmap.c | 4 +- arch/frv/mm/elf-fdpic.c | 2 +- arch/mips/mm/mmap.c | 2 +- arch/parisc/kernel/sys_parisc.c | 15 +- arch/powerpc/mm/hugetlbpage-radix.c | 2 +- arch/powerpc/mm/mmap.c | 4 +- arch/powerpc/mm/slice.c | 2 +- arch/s390/mm/mmap.c | 4 +- arch/sh/mm/mmap.c | 4 +- arch/sparc/kernel/sys_sparc_64.c | 4 +- arch/sparc/mm/hugetlbpage.c | 2 +- arch/tile/mm/hugetlbpage.c | 2 +- arch/x86/kernel/sys_x86_64.c | 4 +- arch/x86/mm/hugetlbpage.c | 2 +- arch/xtensa/kernel/syscall.c | 2 +- fs/hugetlbfs/inode.c | 2 +- fs/proc/task_mmu.c | 4 - include/linux/mm.h | 53 +++---- mm/gup.c | 5 - mm/memory.c | 38 ----- mm/mmap.c | 149 +++++++++++------- 23 files changed, 152 insertions(+), 163 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 0f5c3b4347c6..7737ab5d04b2 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -3811,6 +3811,13 @@ expediting. Set to zero to disable automatic expediting. + stack_guard_gap= [MM] + override the default stack gap protection. The value + is in page units and it defines how many pages prior + to (for stacks growing down) resp. after (for stacks + growing up) the main stack are reserved for no other + mapping. Default value is 256 pages. + stacktrace [FTRACE] Enabled the stack tracer on boot up. diff --git a/arch/arc/mm/mmap.c b/arch/arc/mm/mmap.c index 3e25e8d6486b..2e13683dfb24 100644 --- a/arch/arc/mm/mmap.c +++ b/arch/arc/mm/mmap.c @@ -65,7 +65,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 2239fde10b80..f0701d8d24df 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -90,7 +90,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } @@ -141,7 +141,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, addr = PAGE_ALIGN(addr); vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } diff --git a/arch/frv/mm/elf-fdpic.c b/arch/frv/mm/elf-fdpic.c index da82c25301e7..46aa289c5102 100644 --- a/arch/frv/mm/elf-fdpic.c +++ b/arch/frv/mm/elf-fdpic.c @@ -75,7 +75,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi addr = PAGE_ALIGN(addr); vma = find_vma(current->mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) goto success; } diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c index 64dd8bdd92c3..28adeabe851f 100644 --- a/arch/mips/mm/mmap.c +++ b/arch/mips/mm/mmap.c @@ -93,7 +93,7 @@ static unsigned long arch_get_unmapped_area_common(struct file *filp, vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index e5288638a1d9..378a754ca186 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -90,7 +90,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; + struct vm_area_struct *vma, *prev; unsigned long task_size = TASK_SIZE; int do_color_align, last_mmap; struct vm_unmapped_area_info info; @@ -117,9 +117,10 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, else addr = PAGE_ALIGN(addr); - vma = find_vma(mm, addr); + vma = find_vma_prev(mm, addr, &prev); if (task_size - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma)) && + (!prev || addr >= vm_end_gap(prev))) goto found_addr; } @@ -143,7 +144,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, const unsigned long len, const unsigned long pgoff, const unsigned long flags) { - struct vm_area_struct *vma; + struct vm_area_struct *vma, *prev; struct mm_struct *mm = current->mm; unsigned long addr = addr0; int do_color_align, last_mmap; @@ -177,9 +178,11 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, addr = COLOR_ALIGN(addr, last_mmap, pgoff); else addr = PAGE_ALIGN(addr); - vma = find_vma(mm, addr); + + vma = find_vma_prev(mm, addr, &prev); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma)) && + (!prev || addr >= vm_end_gap(prev))) goto found_addr; } diff --git a/arch/powerpc/mm/hugetlbpage-radix.c b/arch/powerpc/mm/hugetlbpage-radix.c index 6575b9aabef4..a12e86395025 100644 --- a/arch/powerpc/mm/hugetlbpage-radix.c +++ b/arch/powerpc/mm/hugetlbpage-radix.c @@ -68,7 +68,7 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr, addr = ALIGN(addr, huge_page_size(h)); vma = find_vma(mm, addr); if (mm->task_size - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } /* diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c index 9dbd2a733d6b..0ee6be4f1ba4 100644 --- a/arch/powerpc/mm/mmap.c +++ b/arch/powerpc/mm/mmap.c @@ -112,7 +112,7 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr, addr = PAGE_ALIGN(addr); vma = find_vma(mm, addr); if (mm->task_size - len >= addr && addr >= mmap_min_addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } @@ -157,7 +157,7 @@ radix__arch_get_unmapped_area_topdown(struct file *filp, addr = PAGE_ALIGN(addr); vma = find_vma(mm, addr); if (mm->task_size - len >= addr && addr >= mmap_min_addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c index 966b9fccfa66..45f6740dd407 100644 --- a/arch/powerpc/mm/slice.c +++ b/arch/powerpc/mm/slice.c @@ -99,7 +99,7 @@ static int slice_area_is_free(struct mm_struct *mm, unsigned long addr, if ((mm->task_size - len) < addr) return 0; vma = find_vma(mm, addr); - return (!vma || (addr + len) <= vma->vm_start); + return (!vma || (addr + len) <= vm_start_gap(vma)); } static int slice_low_has_vma(struct mm_struct *mm, unsigned long slice) diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c index b017daed6887..b854b1da281a 100644 --- a/arch/s390/mm/mmap.c +++ b/arch/s390/mm/mmap.c @@ -101,7 +101,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, addr = PAGE_ALIGN(addr); vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && addr >= mmap_min_addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) goto check_asce_limit; } @@ -151,7 +151,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, addr = PAGE_ALIGN(addr); vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && addr >= mmap_min_addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) goto check_asce_limit; } diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c index 08e7af0be4a7..6a1a1297baae 100644 --- a/arch/sh/mm/mmap.c +++ b/arch/sh/mm/mmap.c @@ -64,7 +64,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } @@ -114,7 +114,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index ef4520efc813..043544d0cda3 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -120,7 +120,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi vma = find_vma(mm, addr); if (task_size - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } @@ -183,7 +183,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, vma = find_vma(mm, addr); if (task_size - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } diff --git a/arch/sparc/mm/hugetlbpage.c b/arch/sparc/mm/hugetlbpage.c index 7c29d38e6b99..88855e383b34 100644 --- a/arch/sparc/mm/hugetlbpage.c +++ b/arch/sparc/mm/hugetlbpage.c @@ -120,7 +120,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr, addr = ALIGN(addr, huge_page_size(h)); vma = find_vma(mm, addr); if (task_size - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } if (mm->get_unmapped_area == arch_get_unmapped_area) diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c index cb10153b5c9f..03e5cc4e76e4 100644 --- a/arch/tile/mm/hugetlbpage.c +++ b/arch/tile/mm/hugetlbpage.c @@ -233,7 +233,7 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, addr = ALIGN(addr, huge_page_size(h)); vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } if (current->mm->get_unmapped_area == arch_get_unmapped_area) diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c index 207b8f2582c7..213ddf3e937d 100644 --- a/arch/x86/kernel/sys_x86_64.c +++ b/arch/x86/kernel/sys_x86_64.c @@ -144,7 +144,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, addr = PAGE_ALIGN(addr); vma = find_vma(mm, addr); if (end - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } @@ -187,7 +187,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, addr = PAGE_ALIGN(addr); vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 302f43fd9c28..adad702b39cd 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -148,7 +148,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr, addr = ALIGN(addr, huge_page_size(h)); vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } if (mm->get_unmapped_area == arch_get_unmapped_area) diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index 06937928cb72..74afbf02d07e 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -88,7 +88,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, /* At this point: (!vmm || addr < vmm->vm_end). */ if (TASK_SIZE - len < addr) return -ENOMEM; - if (!vmm || addr + len <= vmm->vm_start) + if (!vmm || addr + len <= vm_start_gap(vmm)) return addr; addr = vmm->vm_end; if (flags & MAP_SHARED) diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index dde861387a40..d44f5456eb9b 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -200,7 +200,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr, addr = ALIGN(addr, huge_page_size(h)); vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index f0c8b33d99b1..520802da059c 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -300,11 +300,7 @@ show_map_vma(struct seq_file *m, struct vm_area_struct *vma, int is_pid) /* We don't show the stack guard page in /proc/maps */ start = vma->vm_start; - if (stack_guard_page_start(vma, start)) - start += PAGE_SIZE; end = vma->vm_end; - if (stack_guard_page_end(vma, end)) - end -= PAGE_SIZE; seq_setwidth(m, 25 + sizeof(void *) * 6 - 1); seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu ", diff --git a/include/linux/mm.h b/include/linux/mm.h index b892e95d4929..6f543a47fc92 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1393,12 +1393,6 @@ int clear_page_dirty_for_io(struct page *page); int get_cmdline(struct task_struct *task, char *buffer, int buflen); -/* Is the vma a continuation of the stack vma above it? */ -static inline int vma_growsdown(struct vm_area_struct *vma, unsigned long addr) -{ - return vma && (vma->vm_end == addr) && (vma->vm_flags & VM_GROWSDOWN); -} - static inline bool vma_is_anonymous(struct vm_area_struct *vma) { return !vma->vm_ops; @@ -1414,28 +1408,6 @@ bool vma_is_shmem(struct vm_area_struct *vma); static inline bool vma_is_shmem(struct vm_area_struct *vma) { return false; } #endif -static inline int stack_guard_page_start(struct vm_area_struct *vma, - unsigned long addr) -{ - return (vma->vm_flags & VM_GROWSDOWN) && - (vma->vm_start == addr) && - !vma_growsdown(vma->vm_prev, addr); -} - -/* Is the vma a continuation of the stack vma below it? */ -static inline int vma_growsup(struct vm_area_struct *vma, unsigned long addr) -{ - return vma && (vma->vm_start == addr) && (vma->vm_flags & VM_GROWSUP); -} - -static inline int stack_guard_page_end(struct vm_area_struct *vma, - unsigned long addr) -{ - return (vma->vm_flags & VM_GROWSUP) && - (vma->vm_end == addr) && - !vma_growsup(vma->vm_next, addr); -} - int vma_is_stack_for_current(struct vm_area_struct *vma); extern unsigned long move_page_tables(struct vm_area_struct *vma, @@ -2222,6 +2194,7 @@ void page_cache_async_readahead(struct address_space *mapping, pgoff_t offset, unsigned long size); +extern unsigned long stack_guard_gap; /* Generic expand stack which grows the stack according to GROWS{UP,DOWN} */ extern int expand_stack(struct vm_area_struct *vma, unsigned long address); @@ -2250,6 +2223,30 @@ static inline struct vm_area_struct * find_vma_intersection(struct mm_struct * m return vma; } +static inline unsigned long vm_start_gap(struct vm_area_struct *vma) +{ + unsigned long vm_start = vma->vm_start; + + if (vma->vm_flags & VM_GROWSDOWN) { + vm_start -= stack_guard_gap; + if (vm_start > vma->vm_start) + vm_start = 0; + } + return vm_start; +} + +static inline unsigned long vm_end_gap(struct vm_area_struct *vma) +{ + unsigned long vm_end = vma->vm_end; + + if (vma->vm_flags & VM_GROWSUP) { + vm_end += stack_guard_gap; + if (vm_end < vma->vm_end) + vm_end = -PAGE_SIZE; + } + return vm_end; +} + static inline unsigned long vma_pages(struct vm_area_struct *vma) { return (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; diff --git a/mm/gup.c b/mm/gup.c index b3c7214d710d..576c4df58882 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -387,11 +387,6 @@ static int faultin_page(struct task_struct *tsk, struct vm_area_struct *vma, /* mlock all present pages, but do not fault in new pages */ if ((*flags & (FOLL_POPULATE | FOLL_MLOCK)) == FOLL_MLOCK) return -ENOENT; - /* For mm_populate(), just skip the stack guard page. */ - if ((*flags & FOLL_POPULATE) && - (stack_guard_page_start(vma, address) || - stack_guard_page_end(vma, address + PAGE_SIZE))) - return -ENOENT; if (*flags & FOLL_WRITE) fault_flags |= FAULT_FLAG_WRITE; if (*flags & FOLL_REMOTE) diff --git a/mm/memory.c b/mm/memory.c index 2e65df1831d9..bb11c474857e 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2854,40 +2854,6 @@ out_release: return ret; } -/* - * This is like a special single-page "expand_{down|up}wards()", - * except we must first make sure that 'address{-|+}PAGE_SIZE' - * doesn't hit another vma. - */ -static inline int check_stack_guard_page(struct vm_area_struct *vma, unsigned long address) -{ - address &= PAGE_MASK; - if ((vma->vm_flags & VM_GROWSDOWN) && address == vma->vm_start) { - struct vm_area_struct *prev = vma->vm_prev; - - /* - * Is there a mapping abutting this one below? - * - * That's only ok if it's the same stack mapping - * that has gotten split.. - */ - if (prev && prev->vm_end == address) - return prev->vm_flags & VM_GROWSDOWN ? 0 : -ENOMEM; - - return expand_downwards(vma, address - PAGE_SIZE); - } - if ((vma->vm_flags & VM_GROWSUP) && address + PAGE_SIZE == vma->vm_end) { - struct vm_area_struct *next = vma->vm_next; - - /* As VM_GROWSDOWN but s/below/above/ */ - if (next && next->vm_start == address + PAGE_SIZE) - return next->vm_flags & VM_GROWSUP ? 0 : -ENOMEM; - - return expand_upwards(vma, address + PAGE_SIZE); - } - return 0; -} - /* * We enter with non-exclusive mmap_sem (to exclude vma changes, * but allow concurrent faults), and pte mapped but not yet locked. @@ -2904,10 +2870,6 @@ static int do_anonymous_page(struct vm_fault *vmf) if (vma->vm_flags & VM_SHARED) return VM_FAULT_SIGBUS; - /* Check if we need to add a guard page to the stack */ - if (check_stack_guard_page(vma, vmf->address) < 0) - return VM_FAULT_SIGSEGV; - /* * Use pte_alloc() instead of pte_alloc_map(). We can't run * pte_offset_map() on pmds where a huge pmd might be created diff --git a/mm/mmap.c b/mm/mmap.c index f82741e199c0..8e07976d5e47 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -183,6 +183,7 @@ SYSCALL_DEFINE1(brk, unsigned long, brk) unsigned long retval; unsigned long newbrk, oldbrk; struct mm_struct *mm = current->mm; + struct vm_area_struct *next; unsigned long min_brk; bool populate; LIST_HEAD(uf); @@ -229,7 +230,8 @@ SYSCALL_DEFINE1(brk, unsigned long, brk) } /* Check against existing mmap mappings. */ - if (find_vma_intersection(mm, oldbrk, newbrk+PAGE_SIZE)) + next = find_vma(mm, oldbrk); + if (next && newbrk + PAGE_SIZE > vm_start_gap(next)) goto out; /* Ok, looks good - let it rip. */ @@ -253,10 +255,22 @@ out: static long vma_compute_subtree_gap(struct vm_area_struct *vma) { - unsigned long max, subtree_gap; - max = vma->vm_start; - if (vma->vm_prev) - max -= vma->vm_prev->vm_end; + unsigned long max, prev_end, subtree_gap; + + /* + * Note: in the rare case of a VM_GROWSDOWN above a VM_GROWSUP, we + * allow two stack_guard_gaps between them here, and when choosing + * an unmapped area; whereas when expanding we only require one. + * That's a little inconsistent, but keeps the code here simpler. + */ + max = vm_start_gap(vma); + if (vma->vm_prev) { + prev_end = vm_end_gap(vma->vm_prev); + if (max > prev_end) + max -= prev_end; + else + max = 0; + } if (vma->vm_rb.rb_left) { subtree_gap = rb_entry(vma->vm_rb.rb_left, struct vm_area_struct, vm_rb)->rb_subtree_gap; @@ -352,7 +366,7 @@ static void validate_mm(struct mm_struct *mm) anon_vma_unlock_read(anon_vma); } - highest_address = vma->vm_end; + highest_address = vm_end_gap(vma); vma = vma->vm_next; i++; } @@ -541,7 +555,7 @@ void __vma_link_rb(struct mm_struct *mm, struct vm_area_struct *vma, if (vma->vm_next) vma_gap_update(vma->vm_next); else - mm->highest_vm_end = vma->vm_end; + mm->highest_vm_end = vm_end_gap(vma); /* * vma->vm_prev wasn't known when we followed the rbtree to find the @@ -856,7 +870,7 @@ again: vma_gap_update(vma); if (end_changed) { if (!next) - mm->highest_vm_end = end; + mm->highest_vm_end = vm_end_gap(vma); else if (!adjust_next) vma_gap_update(next); } @@ -941,7 +955,7 @@ again: * mm->highest_vm_end doesn't need any update * in remove_next == 1 case. */ - VM_WARN_ON(mm->highest_vm_end != end); + VM_WARN_ON(mm->highest_vm_end != vm_end_gap(vma)); } } if (insert && file) @@ -1787,7 +1801,7 @@ unsigned long unmapped_area(struct vm_unmapped_area_info *info) while (true) { /* Visit left subtree if it looks promising */ - gap_end = vma->vm_start; + gap_end = vm_start_gap(vma); if (gap_end >= low_limit && vma->vm_rb.rb_left) { struct vm_area_struct *left = rb_entry(vma->vm_rb.rb_left, @@ -1798,7 +1812,7 @@ unsigned long unmapped_area(struct vm_unmapped_area_info *info) } } - gap_start = vma->vm_prev ? vma->vm_prev->vm_end : 0; + gap_start = vma->vm_prev ? vm_end_gap(vma->vm_prev) : 0; check_current: /* Check if current node has a suitable gap */ if (gap_start > high_limit) @@ -1825,8 +1839,8 @@ check_current: vma = rb_entry(rb_parent(prev), struct vm_area_struct, vm_rb); if (prev == vma->vm_rb.rb_left) { - gap_start = vma->vm_prev->vm_end; - gap_end = vma->vm_start; + gap_start = vm_end_gap(vma->vm_prev); + gap_end = vm_start_gap(vma); goto check_current; } } @@ -1890,7 +1904,7 @@ unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info) while (true) { /* Visit right subtree if it looks promising */ - gap_start = vma->vm_prev ? vma->vm_prev->vm_end : 0; + gap_start = vma->vm_prev ? vm_end_gap(vma->vm_prev) : 0; if (gap_start <= high_limit && vma->vm_rb.rb_right) { struct vm_area_struct *right = rb_entry(vma->vm_rb.rb_right, @@ -1903,7 +1917,7 @@ unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info) check_current: /* Check if current node has a suitable gap */ - gap_end = vma->vm_start; + gap_end = vm_start_gap(vma); if (gap_end < low_limit) return -ENOMEM; if (gap_start <= high_limit && gap_end - gap_start >= length) @@ -1929,7 +1943,7 @@ check_current: struct vm_area_struct, vm_rb); if (prev == vma->vm_rb.rb_right) { gap_start = vma->vm_prev ? - vma->vm_prev->vm_end : 0; + vm_end_gap(vma->vm_prev) : 0; goto check_current; } } @@ -1967,7 +1981,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; + struct vm_area_struct *vma, *prev; struct vm_unmapped_area_info info; if (len > TASK_SIZE - mmap_min_addr) @@ -1978,9 +1992,10 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, if (addr) { addr = PAGE_ALIGN(addr); - vma = find_vma(mm, addr); + vma = find_vma_prev(mm, addr, &prev); if (TASK_SIZE - len >= addr && addr >= mmap_min_addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma)) && + (!prev || addr >= vm_end_gap(prev))) return addr; } @@ -2003,7 +2018,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, const unsigned long len, const unsigned long pgoff, const unsigned long flags) { - struct vm_area_struct *vma; + struct vm_area_struct *vma, *prev; struct mm_struct *mm = current->mm; unsigned long addr = addr0; struct vm_unmapped_area_info info; @@ -2018,9 +2033,10 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, /* requesting a specific address */ if (addr) { addr = PAGE_ALIGN(addr); - vma = find_vma(mm, addr); + vma = find_vma_prev(mm, addr, &prev); if (TASK_SIZE - len >= addr && addr >= mmap_min_addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma)) && + (!prev || addr >= vm_end_gap(prev))) return addr; } @@ -2155,21 +2171,19 @@ find_vma_prev(struct mm_struct *mm, unsigned long addr, * update accounting. This is shared with both the * grow-up and grow-down cases. */ -static int acct_stack_growth(struct vm_area_struct *vma, unsigned long size, unsigned long grow) +static int acct_stack_growth(struct vm_area_struct *vma, + unsigned long size, unsigned long grow) { struct mm_struct *mm = vma->vm_mm; struct rlimit *rlim = current->signal->rlim; - unsigned long new_start, actual_size; + unsigned long new_start; /* address space limit tests */ if (!may_expand_vm(mm, vma->vm_flags, grow)) return -ENOMEM; /* Stack limit test */ - actual_size = size; - if (size && (vma->vm_flags & (VM_GROWSUP | VM_GROWSDOWN))) - actual_size -= PAGE_SIZE; - if (actual_size > READ_ONCE(rlim[RLIMIT_STACK].rlim_cur)) + if (size > READ_ONCE(rlim[RLIMIT_STACK].rlim_cur)) return -ENOMEM; /* mlock limit tests */ @@ -2207,17 +2221,30 @@ static int acct_stack_growth(struct vm_area_struct *vma, unsigned long size, uns int expand_upwards(struct vm_area_struct *vma, unsigned long address) { struct mm_struct *mm = vma->vm_mm; + struct vm_area_struct *next; + unsigned long gap_addr; int error = 0; if (!(vma->vm_flags & VM_GROWSUP)) return -EFAULT; /* Guard against wrapping around to address 0. */ - if (address < PAGE_ALIGN(address+4)) - address = PAGE_ALIGN(address+4); - else + address &= PAGE_MASK; + address += PAGE_SIZE; + if (!address) return -ENOMEM; + /* Enforce stack_guard_gap */ + gap_addr = address + stack_guard_gap; + if (gap_addr < address) + return -ENOMEM; + next = vma->vm_next; + if (next && next->vm_start < gap_addr) { + if (!(next->vm_flags & VM_GROWSUP)) + return -ENOMEM; + /* Check that both stack segments have the same anon_vma? */ + } + /* We must make sure the anon_vma is allocated. */ if (unlikely(anon_vma_prepare(vma))) return -ENOMEM; @@ -2261,7 +2288,7 @@ int expand_upwards(struct vm_area_struct *vma, unsigned long address) if (vma->vm_next) vma_gap_update(vma->vm_next); else - mm->highest_vm_end = address; + mm->highest_vm_end = vm_end_gap(vma); spin_unlock(&mm->page_table_lock); perf_event_mmap(vma); @@ -2282,6 +2309,8 @@ int expand_downwards(struct vm_area_struct *vma, unsigned long address) { struct mm_struct *mm = vma->vm_mm; + struct vm_area_struct *prev; + unsigned long gap_addr; int error; address &= PAGE_MASK; @@ -2289,6 +2318,17 @@ int expand_downwards(struct vm_area_struct *vma, if (error) return error; + /* Enforce stack_guard_gap */ + gap_addr = address - stack_guard_gap; + if (gap_addr > address) + return -ENOMEM; + prev = vma->vm_prev; + if (prev && prev->vm_end > gap_addr) { + if (!(prev->vm_flags & VM_GROWSDOWN)) + return -ENOMEM; + /* Check that both stack segments have the same anon_vma? */ + } + /* We must make sure the anon_vma is allocated. */ if (unlikely(anon_vma_prepare(vma))) return -ENOMEM; @@ -2343,28 +2383,25 @@ int expand_downwards(struct vm_area_struct *vma, return error; } -/* - * Note how expand_stack() refuses to expand the stack all the way to - * abut the next virtual mapping, *unless* that mapping itself is also - * a stack mapping. We want to leave room for a guard page, after all - * (the guard page itself is not added here, that is done by the - * actual page faulting logic) - * - * This matches the behavior of the guard page logic (see mm/memory.c: - * check_stack_guard_page()), which only allows the guard page to be - * removed under these circumstances. - */ +/* enforced gap between the expanding stack and other mappings. */ +unsigned long stack_guard_gap = 256UL< Date: Sun, 11 Jun 2017 16:08:21 +0900 Subject: [PATCH 0904/1065] ALSA: firewire-lib: Fix stall of process context at packet error At Linux v3.5, packet processing can be done in process context of ALSA PCM application as well as software IRQ context for OHCI 1394. Below is an example of the callgraph (some calls are omitted). ioctl(2) with e.g. HWSYNC (sound/core/pcm_native.c) ->snd_pcm_common_ioctl1() ->snd_pcm_hwsync() ->snd_pcm_stream_lock_irq (sound/core/pcm_lib.c) ->snd_pcm_update_hw_ptr() ->snd_pcm_udpate_hw_ptr0() ->struct snd_pcm_ops.pointer() (sound/firewire/*) = Each handler on drivers in ALSA firewire stack (sound/firewire/amdtp-stream.c) ->amdtp_stream_pcm_pointer() (drivers/firewire/core-iso.c) ->fw_iso_context_flush_completions() ->struct fw_card_driver.flush_iso_completion() (drivers/firewire/ohci.c) = flush_iso_completions() ->struct fw_iso_context.callback.sc (sound/firewire/amdtp-stream.c) = in_stream_callback() or out_stream_callback() ->... ->snd_pcm_stream_unlock_irq When packet queueing error occurs or detecting invalid packets in 'in_stream_callback()' or 'out_stream_callback()', 'snd_pcm_stop_xrun()' is called on local CPU with disabled IRQ. (sound/firewire/amdtp-stream.c) in_stream_callback() or out_stream_callback() ->amdtp_stream_pcm_abort() ->snd_pcm_stop_xrun() ->snd_pcm_stream_lock_irqsave() ->snd_pcm_stop() ->snd_pcm_stream_unlock_irqrestore() The process is stalled on the CPU due to attempt to acquire recursive lock. [ 562.630853] INFO: rcu_sched detected stalls on CPUs/tasks: [ 562.630861] 2-...: (1 GPs behind) idle=37d/140000000000000/0 softirq=38323/38323 fqs=7140 [ 562.630862] (detected by 3, t=15002 jiffies, g=21036, c=21035, q=5933) [ 562.630866] Task dump for CPU 2: [ 562.630867] alsa-source-OXF R running task 0 6619 1 0x00000008 [ 562.630870] Call Trace: [ 562.630876] ? vt_console_print+0x79/0x3e0 [ 562.630880] ? msg_print_text+0x9d/0x100 [ 562.630883] ? up+0x32/0x50 [ 562.630885] ? irq_work_queue+0x8d/0xa0 [ 562.630886] ? console_unlock+0x2b6/0x4b0 [ 562.630888] ? vprintk_emit+0x312/0x4a0 [ 562.630892] ? dev_vprintk_emit+0xbf/0x230 [ 562.630895] ? do_sys_poll+0x37a/0x550 [ 562.630897] ? dev_printk_emit+0x4e/0x70 [ 562.630900] ? __dev_printk+0x3c/0x80 [ 562.630903] ? _raw_spin_lock+0x20/0x30 [ 562.630909] ? snd_pcm_stream_lock+0x31/0x50 [snd_pcm] [ 562.630914] ? _snd_pcm_stream_lock_irqsave+0x2e/0x40 [snd_pcm] [ 562.630918] ? snd_pcm_stop_xrun+0x16/0x70 [snd_pcm] [ 562.630922] ? in_stream_callback+0x3e6/0x450 [snd_firewire_lib] [ 562.630925] ? handle_ir_packet_per_buffer+0x8e/0x1a0 [firewire_ohci] [ 562.630928] ? ohci_flush_iso_completions+0xa3/0x130 [firewire_ohci] [ 562.630932] ? fw_iso_context_flush_completions+0x15/0x20 [firewire_core] [ 562.630935] ? amdtp_stream_pcm_pointer+0x2d/0x40 [snd_firewire_lib] [ 562.630938] ? pcm_capture_pointer+0x19/0x20 [snd_oxfw] [ 562.630943] ? snd_pcm_update_hw_ptr0+0x47/0x3d0 [snd_pcm] [ 562.630945] ? poll_select_copy_remaining+0x150/0x150 [ 562.630947] ? poll_select_copy_remaining+0x150/0x150 [ 562.630952] ? snd_pcm_update_hw_ptr+0x10/0x20 [snd_pcm] [ 562.630956] ? snd_pcm_hwsync+0x45/0xb0 [snd_pcm] [ 562.630960] ? snd_pcm_common_ioctl1+0x1ff/0xc90 [snd_pcm] [ 562.630962] ? futex_wake+0x90/0x170 [ 562.630966] ? snd_pcm_capture_ioctl1+0x136/0x260 [snd_pcm] [ 562.630970] ? snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm] [ 562.630972] ? do_vfs_ioctl+0xa3/0x610 [ 562.630974] ? vfs_read+0x11b/0x130 [ 562.630976] ? SyS_ioctl+0x79/0x90 [ 562.630978] ? entry_SYSCALL_64_fastpath+0x1e/0xad This commit fixes the above bug. This assumes two cases: 1. Any error is detected in software IRQ context of OHCI 1394 context. In this case, PCM substream should be aborted in packet handler. On the other hand, it should not be done in any process context. TO distinguish these two context, use 'in_interrupt()' macro. 2. Any error is detect in process context of ALSA PCM application. In this case, PCM substream should not be aborted in packet handler because PCM substream lock is acquired. The task to abort PCM substream should be done in ALSA PCM core. For this purpose, SNDRV_PCM_POS_XRUN is returned at 'struct snd_pcm_ops.pointer()'. Suggested-by: Clemens Ladisch Fixes: e9148dddc3c7("ALSA: firewire-lib: flush completed packets when reading PCM position") Cc: # 4.9+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/amdtp-stream.c | 8 ++++++-- sound/firewire/amdtp-stream.h | 2 +- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/sound/firewire/amdtp-stream.c b/sound/firewire/amdtp-stream.c index 9e6f54f8c45d..1e26854b3425 100644 --- a/sound/firewire/amdtp-stream.c +++ b/sound/firewire/amdtp-stream.c @@ -682,7 +682,9 @@ static void out_stream_callback(struct fw_iso_context *context, u32 tstamp, cycle = increment_cycle_count(cycle, 1); if (s->handle_packet(s, 0, cycle, i) < 0) { s->packet_index = -1; - amdtp_stream_pcm_abort(s); + if (in_interrupt()) + amdtp_stream_pcm_abort(s); + WRITE_ONCE(s->pcm_buffer_pointer, SNDRV_PCM_POS_XRUN); return; } } @@ -734,7 +736,9 @@ static void in_stream_callback(struct fw_iso_context *context, u32 tstamp, /* Queueing error or detecting invalid payload. */ if (i < packets) { s->packet_index = -1; - amdtp_stream_pcm_abort(s); + if (in_interrupt()) + amdtp_stream_pcm_abort(s); + WRITE_ONCE(s->pcm_buffer_pointer, SNDRV_PCM_POS_XRUN); return; } diff --git a/sound/firewire/amdtp-stream.h b/sound/firewire/amdtp-stream.h index 7e8831722821..ea1a91e99875 100644 --- a/sound/firewire/amdtp-stream.h +++ b/sound/firewire/amdtp-stream.h @@ -135,7 +135,7 @@ struct amdtp_stream { /* For a PCM substream processing. */ struct snd_pcm_substream *pcm; struct tasklet_struct period_tasklet; - unsigned int pcm_buffer_pointer; + snd_pcm_uframes_t pcm_buffer_pointer; unsigned int pcm_period_pointer; /* To wait for first packet. */ From 9745e362add89432d2c951272a99b0a5fe4348a9 Mon Sep 17 00:00:00 2001 From: Gao Feng Date: Fri, 16 Jun 2017 15:00:02 +0800 Subject: [PATCH 0905/1065] net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev The register_vlan_device would invoke free_netdev directly, when register_vlan_dev failed. It would trigger the BUG_ON in free_netdev if the dev was already registered. In this case, the netdev would be freed in netdev_run_todo later. So add one condition check now. Only when dev is not registered, then free it directly. The following is the part coredump when netdev_upper_dev_link failed in register_vlan_dev. I removed the lines which are too long. [ 411.237457] ------------[ cut here ]------------ [ 411.237458] kernel BUG at net/core/dev.c:7998! [ 411.237484] invalid opcode: 0000 [#1] SMP [ 411.237705] [last unloaded: 8021q] [ 411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G E 4.12.0-rc5+ #6 [ 411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 411.237764] task: ffff9cbeb6685580 task.stack: ffffa7d2807d8000 [ 411.237782] RIP: 0010:free_netdev+0x116/0x120 [ 411.237794] RSP: 0018:ffffa7d2807dbdb0 EFLAGS: 00010297 [ 411.237808] RAX: 0000000000000002 RBX: ffff9cbeb6ba8fd8 RCX: 0000000000001878 [ 411.237826] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000000 [ 411.237844] RBP: ffffa7d2807dbdc8 R08: 0002986100029841 R09: 0002982100029801 [ 411.237861] R10: 0004000100029980 R11: 0004000100029980 R12: ffff9cbeb6ba9000 [ 411.238761] R13: ffff9cbeb6ba9060 R14: ffff9cbe60f1a000 R15: ffff9cbeb6ba9000 [ 411.239518] FS: 00007fb690d81700(0000) GS:ffff9cbebb640000(0000) knlGS:0000000000000000 [ 411.239949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 411.240454] CR2: 00007f7115624000 CR3: 0000000077cdf000 CR4: 00000000003406e0 [ 411.240936] Call Trace: [ 411.241462] vlan_ioctl_handler+0x3f1/0x400 [8021q] [ 411.241910] sock_ioctl+0x18b/0x2c0 [ 411.242394] do_vfs_ioctl+0xa1/0x5d0 [ 411.242853] ? sock_alloc_file+0xa6/0x130 [ 411.243465] SyS_ioctl+0x79/0x90 [ 411.243900] entry_SYSCALL_64_fastpath+0x1e/0xa9 [ 411.244425] RIP: 0033:0x7fb69089a357 [ 411.244863] RSP: 002b:00007ffcd04e0fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 411.245445] RAX: ffffffffffffffda RBX: 00007ffcd04e2884 RCX: 00007fb69089a357 [ 411.245903] RDX: 00007ffcd04e0fd0 RSI: 0000000000008983 RDI: 0000000000000003 [ 411.246527] RBP: 00007ffcd04e0fd0 R08: 0000000000000000 R09: 1999999999999999 [ 411.246976] R10: 000000000000053f R11: 0000000000000202 R12: 0000000000000004 [ 411.247414] R13: 00007ffcd04e1128 R14: 00007ffcd04e2888 R15: 0000000000000001 [ 411.249129] RIP: free_netdev+0x116/0x120 RSP: ffffa7d2807dbdb0 Signed-off-by: Gao Feng Signed-off-by: David S. Miller --- net/8021q/vlan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 467069b73ce1..9649579b5b9f 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -277,7 +277,8 @@ static int register_vlan_device(struct net_device *real_dev, u16 vlan_id) return 0; out_free_newdev: - free_netdev(new_dev); + if (new_dev->reg_state == NETREG_UNINITIALIZED) + free_netdev(new_dev); return err; } From 7fe5b914313ff67d71cb2b5aa4b850e0884e75dd Mon Sep 17 00:00:00 2001 From: Lin Yun Sheng Date: Fri, 16 Jun 2017 17:24:51 +0800 Subject: [PATCH 0906/1065] net/hns:bugfix of ethtool -t phy self_test This patch fixes the phy loopback self_test failed issue. when Marvell Phy Module is loaded, it will powerdown fiber when doing phy loopback self test, which cause phy loopback self_test fail. Signed-off-by: Lin Yun Sheng Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c index b8fab149690f..e95795b3c841 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c @@ -288,9 +288,15 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en) /* Force 1000M Link, Default is 0x0200 */ phy_write(phy_dev, 7, 0x20C); - phy_write(phy_dev, HNS_PHY_PAGE_REG, 0); - /* Enable PHY loop-back */ + /* Powerup Fiber */ + phy_write(phy_dev, HNS_PHY_PAGE_REG, 1); + val = phy_read(phy_dev, COPPER_CONTROL_REG); + val &= ~PHY_POWER_DOWN; + phy_write(phy_dev, COPPER_CONTROL_REG, val); + + /* Enable Phy Loopback */ + phy_write(phy_dev, HNS_PHY_PAGE_REG, 0); val = phy_read(phy_dev, COPPER_CONTROL_REG); val |= PHY_LOOP_BACK; val &= ~PHY_POWER_DOWN; @@ -299,6 +305,12 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en) phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA); phy_write(phy_dev, 1, 0x400); phy_write(phy_dev, 7, 0x200); + + phy_write(phy_dev, HNS_PHY_PAGE_REG, 1); + val = phy_read(phy_dev, COPPER_CONTROL_REG); + val |= PHY_POWER_DOWN; + phy_write(phy_dev, COPPER_CONTROL_REG, val); + phy_write(phy_dev, HNS_PHY_PAGE_REG, 0); phy_write(phy_dev, 9, 0xF00); From 94fc795454f461134cdffb88bef4eb9f788c0b5d Mon Sep 17 00:00:00 2001 From: Gary R Hook Date: Thu, 4 May 2017 11:36:52 -0500 Subject: [PATCH 0907/1065] ntb: Correct modinfo usage statement for ntb_perf The order parameters are powers of 2; adjust the usage information to use correct mathematical representations. Signed-off-by: Gary R Hook Fixes: 8a7b6a778a85 ("ntb: ntb perf tool") Acked-by: Dave Jiang Signed-off-by: Jon Mason --- drivers/ntb/test/ntb_perf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index 434e1d474f33..5cab2831ce99 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -90,11 +90,11 @@ MODULE_PARM_DESC(max_mw_size, "Limit size of large memory windows"); static unsigned int seg_order = 19; /* 512K */ module_param(seg_order, uint, 0644); -MODULE_PARM_DESC(seg_order, "size order [n^2] of buffer segment for testing"); +MODULE_PARM_DESC(seg_order, "size order [2^n] of buffer segment for testing"); static unsigned int run_order = 32; /* 4G */ module_param(run_order, uint, 0644); -MODULE_PARM_DESC(run_order, "size order [n^2] of total data to transfer"); +MODULE_PARM_DESC(run_order, "size order [2^n] of total data to transfer"); static bool use_dma; /* default to 0 */ module_param(use_dma, bool, 0644); From 07b0b22b3e58824f70b9188d085d400069ca3240 Mon Sep 17 00:00:00 2001 From: Logan Gunthorpe Date: Mon, 5 Jun 2017 10:13:24 -0600 Subject: [PATCH 0908/1065] NTB: ntb_test: fix bug printing ntb_perf results The code mistakenly prints the local perf results for the remote test so the script reports identical results for both directions. Fix this by ensuring we print the remote result. Signed-off-by: Logan Gunthorpe Fixes: a9c59ef77458 ("ntb_test: Add a selftest script for the NTB subsystem") Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- tools/testing/selftests/ntb/ntb_test.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh index a676d3eefefb..13f5198ba0ee 100755 --- a/tools/testing/selftests/ntb/ntb_test.sh +++ b/tools/testing/selftests/ntb/ntb_test.sh @@ -305,7 +305,7 @@ function perf_test() echo "Running remote perf test $WITH DMA" write_file "" $REMOTE_PERF/run echo -n " " - read_file $LOCAL_PERF/run + read_file $REMOTE_PERF/run echo " Passed" _modprobe -r ntb_perf From cb827ee6ccc3e480f0d9c0e8e53eef55be5b0414 Mon Sep 17 00:00:00 2001 From: Logan Gunthorpe Date: Mon, 5 Jun 2017 14:00:52 -0600 Subject: [PATCH 0909/1065] ntb_transport: fix qp count bug In cases where there are more mw's than spads/2-2, the mw count gets reduced to match the limitation. ntb_transport also tries to ensure that there are fewer qps than mws but uses the full mw count instead of the reduced one. When this happens, the math in 'ntb_transport_setup_qp_mw' will get confused and result in a kernel paging request bug. This patch fixes the bug by reducing qp_count to the reduced mw count instead of the full mw count. Signed-off-by: Logan Gunthorpe Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 02ca45fdd892..0a778d2cab94 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -1128,8 +1128,8 @@ static int ntb_transport_probe(struct ntb_client *self, struct ntb_dev *ndev) qp_count = ilog2(qp_bitmap); if (max_num_clients && max_num_clients < qp_count) qp_count = max_num_clients; - else if (mw_count < qp_count) - qp_count = mw_count; + else if (nt->mw_count < qp_count) + qp_count = nt->mw_count; qp_bitmap &= BIT_ULL(qp_count) - 1; From 8e8496e0e9564b66165f5219a4e8ed20b0d3fc6b Mon Sep 17 00:00:00 2001 From: Logan Gunthorpe Date: Mon, 5 Jun 2017 14:00:53 -0600 Subject: [PATCH 0910/1065] ntb_transport: fix bug calculating num_qps_mw A divide by zero error occurs if qp_count is less than mw_count because num_qps_mw is calculated to be zero. The calculation appears to be incorrect. The requirement is for num_qps_mw to be set to qp_count / mw_count with any remainder divided among the earlier mws. For example, if mw_count is 5 and qp_count is 12 then mws 0 and 1 will have 3 qps per window and mws 2 through 4 will have 2 qps per window. Thus, when mw_num < qp_count % mw_count, num_qps_mw is 1 higher than when mw_num >= qp_count. Signed-off-by: Logan Gunthorpe Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 0a778d2cab94..5b6b00ea6ed9 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -623,7 +623,7 @@ static int ntb_transport_setup_qp_mw(struct ntb_transport_ctx *nt, if (!mw->virt_addr) return -ENOMEM; - if (qp_count % mw_count && mw_num + 1 < qp_count / mw_count) + if (mw_num < qp_count % mw_count) num_qps_mw = qp_count / mw_count + 1; else num_qps_mw = qp_count / mw_count; @@ -1000,7 +1000,7 @@ static int ntb_transport_init_queue(struct ntb_transport_ctx *nt, qp->event_handler = NULL; ntb_qp_link_down_reset(qp); - if (qp_count % mw_count && mw_num + 1 < qp_count / mw_count) + if (mw_num < qp_count % mw_count) num_qps_mw = qp_count / mw_count + 1; else num_qps_mw = qp_count / mw_count; From 5eb449e15d2396785a8eb15baf42cea33db9ae13 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 8 Jun 2017 12:46:45 -0700 Subject: [PATCH 0911/1065] ntb: ntb_hw_intel: Skylake doorbells should be 32bits, not 64bits Fixing doorbell register length to 32bits per spec. On Skylake NTB, the doorbell registers are 32bit write only registers. The source for the doorbell is a 64bit register that shows the interrupt bits. Signed-off-by: Dave Jiang Fixes: 783dfa6cc41b ("ntb: Adding Skylake Xeon NTB support") Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- drivers/ntb/hw/intel/ntb_hw_intel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c index c00238491673..7b3b6fd63d7d 100644 --- a/drivers/ntb/hw/intel/ntb_hw_intel.c +++ b/drivers/ntb/hw/intel/ntb_hw_intel.c @@ -2878,7 +2878,7 @@ static const struct intel_ntb_reg skx_reg = { .link_is_up = xeon_link_is_up, .db_ioread = skx_db_ioread, .db_iowrite = skx_db_iowrite, - .db_size = sizeof(u64), + .db_size = sizeof(u32), .ntb_ctl = SKX_NTBCNTL_OFFSET, .mw_bar = {2, 4}, }; From 88931ec3dc11e7dbceb3b0df455693873b508fbe Mon Sep 17 00:00:00 2001 From: Allen Hubbe Date: Fri, 9 Jun 2017 18:06:36 -0400 Subject: [PATCH 0912/1065] ntb: no sleep in ntb_async_tx_submit Do not sleep in ntb_async_tx_submit, which could deadlock. This reverts commit "8c874cc140d667f84ae4642bb5b5e0d6396d2ca4" Fixes: 8c874cc140d6 ("NTB: Address out of DMA descriptor issue with NTB") Reported-by: Jia-Ju Bai Signed-off-by: Allen Hubbe Acked-by: Dave Jiang Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 50 ++++++------------------------------- 1 file changed, 7 insertions(+), 43 deletions(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 5b6b00ea6ed9..10e5bf460139 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -177,14 +177,12 @@ struct ntb_transport_qp { u64 rx_err_ver; u64 rx_memcpy; u64 rx_async; - u64 dma_rx_prep_err; u64 tx_bytes; u64 tx_pkts; u64 tx_ring_full; u64 tx_err_no_buf; u64 tx_memcpy; u64 tx_async; - u64 dma_tx_prep_err; }; struct ntb_transport_mw { @@ -254,8 +252,6 @@ enum { #define QP_TO_MW(nt, qp) ((qp) % nt->mw_count) #define NTB_QP_DEF_NUM_ENTRIES 100 #define NTB_LINK_DOWN_TIMEOUT 10 -#define DMA_RETRIES 20 -#define DMA_OUT_RESOURCE_TO msecs_to_jiffies(50) static void ntb_transport_rxc_db(unsigned long data); static const struct ntb_ctx_ops ntb_transport_ops; @@ -516,12 +512,6 @@ static ssize_t debugfs_read(struct file *filp, char __user *ubuf, size_t count, out_offset += snprintf(buf + out_offset, out_count - out_offset, "free tx - \t%u\n", ntb_transport_tx_free_entry(qp)); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "DMA tx prep err - \t%llu\n", - qp->dma_tx_prep_err); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "DMA rx prep err - \t%llu\n", - qp->dma_rx_prep_err); out_offset += snprintf(buf + out_offset, out_count - out_offset, "\n"); @@ -768,8 +758,6 @@ static void ntb_qp_link_down_reset(struct ntb_transport_qp *qp) qp->tx_err_no_buf = 0; qp->tx_memcpy = 0; qp->tx_async = 0; - qp->dma_tx_prep_err = 0; - qp->dma_rx_prep_err = 0; } static void ntb_qp_link_cleanup(struct ntb_transport_qp *qp) @@ -1317,7 +1305,6 @@ static int ntb_async_rx_submit(struct ntb_queue_entry *entry, void *offset) struct dmaengine_unmap_data *unmap; dma_cookie_t cookie; void *buf = entry->buf; - int retries = 0; len = entry->len; device = chan->device; @@ -1346,22 +1333,11 @@ static int ntb_async_rx_submit(struct ntb_queue_entry *entry, void *offset) unmap->from_cnt = 1; - for (retries = 0; retries < DMA_RETRIES; retries++) { - txd = device->device_prep_dma_memcpy(chan, - unmap->addr[1], - unmap->addr[0], len, - DMA_PREP_INTERRUPT); - if (txd) - break; - - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(DMA_OUT_RESOURCE_TO); - } - - if (!txd) { - qp->dma_rx_prep_err++; + txd = device->device_prep_dma_memcpy(chan, unmap->addr[1], + unmap->addr[0], len, + DMA_PREP_INTERRUPT); + if (!txd) goto err_get_unmap; - } txd->callback_result = ntb_rx_copy_callback; txd->callback_param = entry; @@ -1606,7 +1582,6 @@ static int ntb_async_tx_submit(struct ntb_transport_qp *qp, struct dmaengine_unmap_data *unmap; dma_addr_t dest; dma_cookie_t cookie; - int retries = 0; device = chan->device; dest = qp->tx_mw_phys + qp->tx_max_frame * entry->tx_index; @@ -1628,21 +1603,10 @@ static int ntb_async_tx_submit(struct ntb_transport_qp *qp, unmap->to_cnt = 1; - for (retries = 0; retries < DMA_RETRIES; retries++) { - txd = device->device_prep_dma_memcpy(chan, dest, - unmap->addr[0], len, - DMA_PREP_INTERRUPT); - if (txd) - break; - - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(DMA_OUT_RESOURCE_TO); - } - - if (!txd) { - qp->dma_tx_prep_err++; + txd = device->device_prep_dma_memcpy(chan, dest, unmap->addr[0], len, + DMA_PREP_INTERRUPT); + if (!txd) goto err_get_unmap; - } txd->callback_result = ntb_tx_copy_callback; txd->callback_param = entry; From 86fdb3448cc1ffe0e9f55380f1410f1d12c35f95 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sat, 17 Jun 2017 16:10:27 +0800 Subject: [PATCH 0913/1065] sctp: ensure ep is not destroyed before doing the dump Now before dumping a sock in sctp_diag, it only holds the sock while the ep may be already destroyed. It can cause a use-after-free panic when accessing ep->asocs. This patch is to set sctp_sk(sk)->ep NULL in sctp_endpoint_destroy, and check if this ep is already destroyed before dumping this ep. Suggested-by: Marcelo Ricardo Leitner Signed-off-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/endpointola.c | 1 + net/sctp/sctp_diag.c | 5 +++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c index 8c589230794f..3dcd0ecf3d99 100644 --- a/net/sctp/endpointola.c +++ b/net/sctp/endpointola.c @@ -275,6 +275,7 @@ static void sctp_endpoint_destroy(struct sctp_endpoint *ep) if (sctp_sk(sk)->bind_hash) sctp_put_port(sk); + sctp_sk(sk)->ep = NULL; sock_put(sk); } diff --git a/net/sctp/sctp_diag.c b/net/sctp/sctp_diag.c index 048954eee984..9a647214a91e 100644 --- a/net/sctp/sctp_diag.c +++ b/net/sctp/sctp_diag.c @@ -278,7 +278,6 @@ out: static int sctp_sock_dump(struct sock *sk, void *p) { - struct sctp_endpoint *ep = sctp_sk(sk)->ep; struct sctp_comm_param *commp = p; struct sk_buff *skb = commp->skb; struct netlink_callback *cb = commp->cb; @@ -287,7 +286,9 @@ static int sctp_sock_dump(struct sock *sk, void *p) int err = 0; lock_sock(sk); - list_for_each_entry(assoc, &ep->asocs, asocs) { + if (!sctp_sk(sk)->ep) + goto release; + list_for_each_entry(assoc, &sctp_sk(sk)->ep->asocs, asocs) { if (cb->args[4] < cb->args[1]) goto next; From a8ae0a773d38b4b1d4566b0edcb6bb63f4a9d22f Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Mon, 19 Jun 2017 11:08:28 -0700 Subject: [PATCH 0914/1065] drm/i915: Don't enable backlight at setup time. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Maarten and Ville noticed that we are enabling backlight via DP aux very early in the modeset_init path via the intel_dp_aux_setup_backlight() function, since commit e7156c833903 ("drm/i915: Add Backlight Control using DPCD for eDP connectors (v9)"). Looks like all we need to do during _setup_backlight() is read the current brightness state instead of modifying it. v2: Rewrote commit message. Cc: Ville Syrjala Cc: Maarten Lankhorst Cc: Jani Nikula Cc: Yetunde Adebisi Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Maarten Lankhorst Acked-by: Jani Nikula Tested-by: Puthikorn Voravootivat Fixes: e7156c833903 ("drm/i915: Add Backlight Control using DPCD for eDP connectors (v9)") Link: http://patchwork.freedesktop.org/patch/msgid/1497384239-2965-1-git-send-email-dhinakaran.pandiyan@intel.com Signed-off-by: Ville Syrjälä (cherry picked from commit f6262bda462e81e959b80a96dac799bd9df27f73) Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1497895708-19422-1-git-send-email-dhinakaran.pandiyan@intel.com --- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c index 6532e226db29..40ba3134545e 100644 --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c @@ -119,8 +119,6 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector, struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); struct intel_panel *panel = &connector->panel; - intel_dp_aux_enable_backlight(connector); - if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) panel->backlight.max = 0xFFFF; else From 6e88491cf2a3b17199c78bd53348b39dc6a88275 Mon Sep 17 00:00:00 2001 From: Junshan Fang Date: Thu, 15 Jun 2017 14:02:20 +0800 Subject: [PATCH 0915/1065] drm/amdgpu: add Polaris12 DID Signed-off-by: Junshan Fang Reviewed-by: Roger.He Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index f2d705e6a75a..ab6b0d0febab 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -449,6 +449,7 @@ static const struct pci_device_id pciidlist[] = { {0x1002, 0x6986, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, {0x1002, 0x6987, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, {0x1002, 0x6995, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, + {0x1002, 0x6997, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, {0x1002, 0x699F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, /* Vega 10 */ {0x1002, 0x6860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VEGA10|AMD_EXP_HW_SUPPORT}, From 4a072c71f49b0a0e495ea13423bdb850da73c58c Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Thu, 15 Jun 2017 00:45:26 +0200 Subject: [PATCH 0916/1065] random: silence compiler warnings and fix race Odd versions of gcc for the sh4 architecture will actually warn about flags being used while uninitialized, so we set them to zero. Non crazy gccs will optimize that out again, so it doesn't make a difference. Next, over aggressive gccs could inline the expression that defines use_lock, which could then introduce a race resulting in a lock imbalance. By using READ_ONCE, we prevent that fate. Finally, we make that assignment const, so that gcc can still optimize a nice amount. Finally, we fix a potential deadlock between primary_crng.lock and batched_entropy_reset_lock, where they could be called in opposite order. Moving the call to invalidate_batched_entropy to outside the lock rectifies this issue. Fixes: b169c13de473a85b3c859bb36216a4cb5f00a54a Signed-off-by: Jason A. Donenfeld Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- drivers/char/random.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index e870f329db88..01a260f67437 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -803,13 +803,13 @@ static int crng_fast_load(const char *cp, size_t len) p[crng_init_cnt % CHACHA20_KEY_SIZE] ^= *cp; cp++; crng_init_cnt++; len--; } + spin_unlock_irqrestore(&primary_crng.lock, flags); if (crng_init_cnt >= CRNG_INIT_CNT_THRESH) { invalidate_batched_entropy(); crng_init = 1; wake_up_interruptible(&crng_init_wait); pr_notice("random: fast init done\n"); } - spin_unlock_irqrestore(&primary_crng.lock, flags); return 1; } @@ -841,6 +841,7 @@ static void crng_reseed(struct crng_state *crng, struct entropy_store *r) } memzero_explicit(&buf, sizeof(buf)); crng->init_time = jiffies; + spin_unlock_irqrestore(&primary_crng.lock, flags); if (crng == &primary_crng && crng_init < 2) { invalidate_batched_entropy(); crng_init = 2; @@ -848,7 +849,6 @@ static void crng_reseed(struct crng_state *crng, struct entropy_store *r) wake_up_interruptible(&crng_init_wait); pr_notice("random: crng init done\n"); } - spin_unlock_irqrestore(&primary_crng.lock, flags); } static inline void crng_wait_ready(void) @@ -2041,8 +2041,8 @@ static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u64); u64 get_random_u64(void) { u64 ret; - bool use_lock = crng_init < 2; - unsigned long flags; + bool use_lock = READ_ONCE(crng_init) < 2; + unsigned long flags = 0; struct batched_entropy *batch; #if BITS_PER_LONG == 64 @@ -2073,8 +2073,8 @@ static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u32); u32 get_random_u32(void) { u32 ret; - bool use_lock = crng_init < 2; - unsigned long flags; + bool use_lock = READ_ONCE(crng_init) < 2; + unsigned long flags = 0; struct batched_entropy *batch; if (arch_get_random_int(&ret)) From 6ebf81536d3be327c4f5f59bae3b841d62322343 Mon Sep 17 00:00:00 2001 From: Manish Rangankar Date: Thu, 15 Jun 2017 00:10:39 -0700 Subject: [PATCH 0917/1065] scsi: qedi: Remove WARN_ON for untracked cleanup. Signed-off-by: Manish Rangankar Reviewed-by: Lee Duncan Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_fw.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c index 8bc7ee1a8ca8..507512cc478b 100644 --- a/drivers/scsi/qedi/qedi_fw.c +++ b/drivers/scsi/qedi/qedi_fw.c @@ -870,7 +870,6 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi, QEDI_ERR(&qedi->dbg_ctx, "Delayed or untracked cleanup response, itt=0x%x, tid=0x%x, cid=0x%x, task=%p\n", protoitt, cqe->itid, qedi_conn->iscsi_conn_id, task); - WARN_ON(1); } } From 02d94e04747c5df55410c7b19f3cf72a1a11899b Mon Sep 17 00:00:00 2001 From: Manish Rangankar Date: Thu, 15 Jun 2017 00:10:40 -0700 Subject: [PATCH 0918/1065] scsi: qedi: Remove WARN_ON from clear task context. Signed-off-by: Manish Rangankar Reviewed-by: Lee Duncan Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index 09a294634bc7..879d3b7462f9 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -1499,11 +1499,9 @@ err_idx: void qedi_clear_task_idx(struct qedi_ctx *qedi, int idx) { - if (!test_and_clear_bit(idx, qedi->task_idx_map)) { + if (!test_and_clear_bit(idx, qedi->task_idx_map)) QEDI_ERR(&qedi->dbg_ctx, "FW task context, already cleared, tid=0x%x\n", idx); - WARN_ON(1); - } } void qedi_update_itt_map(struct qedi_ctx *qedi, u32 tid, u32 proto_itt, From 817ae460c784f32cd45e60b2b1b21378c3c6a847 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 19 Jun 2017 19:48:52 -0700 Subject: [PATCH 0919/1065] Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list Without this quirk, the touchpad is not responsive on this product, with the following message repeated in the logs: psmouse serio1: bad data from KBC - timeout Add it to the notimeout list alongside other similar Fujitsu laptops. Signed-off-by: Daniel Drake Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 09720d950686..f932a83b4990 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -723,6 +723,13 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"), }, }, + { + /* Fujitsu UH554 laptop */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK UH544"), + }, + }, { } }; From c7ecb9068e6772c43941ce609f08bc53f36e1dce Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 14 Jun 2017 07:37:14 +0200 Subject: [PATCH 0920/1065] ALSA: hda - Apply quirks to Broxton-T, too Broxton-T was a forgotten child and we didn't apply the quirks for Skylake+ properly. Meanwhile, a quirk for reducing the DMA latency seems specific to the early Broxton model, so we leave as is. Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e3c696c46a21..01eb1dc7b5b3 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -370,11 +370,12 @@ enum { #define IS_KBL_LP(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9d71) #define IS_KBL_H(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa2f0) #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98) +#define IS_BXT_T(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x1a98) #define IS_GLK(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x3198) #define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348) -#define IS_SKL_PLUS(pci) (IS_SKL(pci) || IS_SKL_LP(pci) || IS_BXT(pci)) || \ - IS_KBL(pci) || IS_KBL_LP(pci) || IS_KBL_H(pci) || \ - IS_GLK(pci) || IS_CFL(pci) +#define IS_SKL_PLUS(pci) (IS_SKL(pci) || IS_SKL_LP(pci) || IS_BXT(pci) || \ + IS_BXT_T(pci) || IS_KBL(pci) || IS_KBL_LP(pci) || \ + IS_KBL_H(pci) || IS_GLK(pci) || IS_CFL(pci)) static char *driver_short_names[] = { [AZX_DRIVER_ICH] = "HDA Intel", From 53145c2e354b5a5ed031cec7472b4f16bab060c7 Mon Sep 17 00:00:00 2001 From: Daniel Stone Date: Thu, 15 Jun 2017 13:35:50 +0100 Subject: [PATCH 0921/1065] Revert "HID: magicmouse: Set multi-touch keybits for Magic Mouse" Setting these bits causes libinput to fail to initialize the device; setting BTN_TOUCH and BTN_TOOL_FINGER causes it to treat the mouse as a touchpad, and it then refuses to continue when it discovers ABS_X is not set. This breaks all known Wayland compositors, as well as Xorg when the libinput driver is being used. This reverts commit f4b65b9563216b3e01a5cc844c3ba68901d9b195. Signed-off-by: Daniel Stone Cc: Che-Liang Chiou Cc: Thierry Escande Cc: Jiri Kosina Cc: Benjamin Tissoires Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-magicmouse.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 1d6c997b3001..20b40ad26325 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -349,7 +349,6 @@ static int magicmouse_raw_event(struct hid_device *hdev, if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) { magicmouse_emit_buttons(msc, clicks & 3); - input_mt_report_pointer_emulation(input, true); input_report_rel(input, REL_X, x); input_report_rel(input, REL_Y, y); } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ @@ -389,16 +388,16 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd __clear_bit(BTN_RIGHT, input->keybit); __clear_bit(BTN_MIDDLE, input->keybit); __set_bit(BTN_MOUSE, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input->keybit); + __set_bit(BTN_TOOL_QUADTAP, input->keybit); + __set_bit(BTN_TOOL_QUINTTAP, input->keybit); + __set_bit(BTN_TOUCH, input->keybit); + __set_bit(INPUT_PROP_POINTER, input->propbit); __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); } - __set_bit(BTN_TOOL_FINGER, input->keybit); - __set_bit(BTN_TOOL_DOUBLETAP, input->keybit); - __set_bit(BTN_TOOL_TRIPLETAP, input->keybit); - __set_bit(BTN_TOOL_QUADTAP, input->keybit); - __set_bit(BTN_TOOL_QUINTTAP, input->keybit); - __set_bit(BTN_TOUCH, input->keybit); - __set_bit(INPUT_PROP_POINTER, input->propbit); __set_bit(EV_ABS, input->evbit); From ceea5e3771ed2378668455fa21861bead7504df5 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 8 Jun 2017 16:44:20 -0700 Subject: [PATCH 0922/1065] time: Fix clock->read(clock) race around clocksource changes In tests, which excercise switching of clocksources, a NULL pointer dereference can be observed on AMR64 platforms in the clocksource read() function: u64 clocksource_mmio_readl_down(struct clocksource *c) { return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask; } This is called from the core timekeeping code via: cycle_now = tkr->read(tkr->clock); tkr->read is the cached tkr->clock->read() function pointer. When the clocksource is changed then tkr->clock and tkr->read are updated sequentially. The code above results in a sequential load operation of tkr->read and tkr->clock as well. If the store to tkr->clock hits between the loads of tkr->read and tkr->clock, then the old read() function is called with the new clock pointer. As a consequence the read() function dereferences a different data structure and the resulting 'reg' pointer can point anywhere including NULL. This problem was introduced when the timekeeping code was switched over to use struct tk_read_base. Before that, it was theoretically possible as well when the compiler decided to reload clock in the code sequence: now = tk->clock->read(tk->clock); Add a helper function which avoids the issue by reading tk_read_base->clock once into a local variable clk and then issue the read function via clk->read(clk). This guarantees that the read() function always gets the proper clocksource pointer handed in. Since there is now no use for the tkr.read pointer, this patch also removes it, and to address stopping the fast timekeeper during suspend/resume, it introduces a dummy clocksource to use rather then just a dummy read function. Signed-off-by: John Stultz Acked-by: Ingo Molnar Cc: Prarit Bhargava Cc: Richard Cochran Cc: Stephen Boyd Cc: stable Cc: Miroslav Lichvar Cc: Daniel Mentz Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- include/linux/timekeeper_internal.h | 1 - kernel/time/timekeeping.c | 52 ++++++++++++++++++++--------- 2 files changed, 36 insertions(+), 17 deletions(-) diff --git a/include/linux/timekeeper_internal.h b/include/linux/timekeeper_internal.h index 110f4532188c..e9834ada4d0c 100644 --- a/include/linux/timekeeper_internal.h +++ b/include/linux/timekeeper_internal.h @@ -29,7 +29,6 @@ */ struct tk_read_base { struct clocksource *clock; - u64 (*read)(struct clocksource *cs); u64 mask; u64 cycle_last; u32 mult; diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 9652bc57fd09..eff94cb8e89e 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -118,6 +118,26 @@ static inline void tk_update_sleep_time(struct timekeeper *tk, ktime_t delta) tk->offs_boot = ktime_add(tk->offs_boot, delta); } +/* + * tk_clock_read - atomic clocksource read() helper + * + * This helper is necessary to use in the read paths because, while the + * seqlock ensures we don't return a bad value while structures are updated, + * it doesn't protect from potential crashes. There is the possibility that + * the tkr's clocksource may change between the read reference, and the + * clock reference passed to the read function. This can cause crashes if + * the wrong clocksource is passed to the wrong read function. + * This isn't necessary to use when holding the timekeeper_lock or doing + * a read of the fast-timekeeper tkrs (which is protected by its own locking + * and update logic). + */ +static inline u64 tk_clock_read(struct tk_read_base *tkr) +{ + struct clocksource *clock = READ_ONCE(tkr->clock); + + return clock->read(clock); +} + #ifdef CONFIG_DEBUG_TIMEKEEPING #define WARNING_FREQ (HZ*300) /* 5 minute rate-limiting */ @@ -175,7 +195,7 @@ static inline u64 timekeeping_get_delta(struct tk_read_base *tkr) */ do { seq = read_seqcount_begin(&tk_core.seq); - now = tkr->read(tkr->clock); + now = tk_clock_read(tkr); last = tkr->cycle_last; mask = tkr->mask; max = tkr->clock->max_cycles; @@ -209,7 +229,7 @@ static inline u64 timekeeping_get_delta(struct tk_read_base *tkr) u64 cycle_now, delta; /* read clocksource */ - cycle_now = tkr->read(tkr->clock); + cycle_now = tk_clock_read(tkr); /* calculate the delta since the last update_wall_time */ delta = clocksource_delta(cycle_now, tkr->cycle_last, tkr->mask); @@ -238,12 +258,10 @@ static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock) ++tk->cs_was_changed_seq; old_clock = tk->tkr_mono.clock; tk->tkr_mono.clock = clock; - tk->tkr_mono.read = clock->read; tk->tkr_mono.mask = clock->mask; - tk->tkr_mono.cycle_last = tk->tkr_mono.read(clock); + tk->tkr_mono.cycle_last = tk_clock_read(&tk->tkr_mono); tk->tkr_raw.clock = clock; - tk->tkr_raw.read = clock->read; tk->tkr_raw.mask = clock->mask; tk->tkr_raw.cycle_last = tk->tkr_mono.cycle_last; @@ -404,7 +422,7 @@ static __always_inline u64 __ktime_get_fast_ns(struct tk_fast *tkf) now += timekeeping_delta_to_ns(tkr, clocksource_delta( - tkr->read(tkr->clock), + tk_clock_read(tkr), tkr->cycle_last, tkr->mask)); } while (read_seqcount_retry(&tkf->seq, seq)); @@ -461,6 +479,10 @@ static u64 dummy_clock_read(struct clocksource *cs) return cycles_at_suspend; } +static struct clocksource dummy_clock = { + .read = dummy_clock_read, +}; + /** * halt_fast_timekeeper - Prevent fast timekeeper from accessing clocksource. * @tk: Timekeeper to snapshot. @@ -477,13 +499,13 @@ static void halt_fast_timekeeper(struct timekeeper *tk) struct tk_read_base *tkr = &tk->tkr_mono; memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy)); - cycles_at_suspend = tkr->read(tkr->clock); - tkr_dummy.read = dummy_clock_read; + cycles_at_suspend = tk_clock_read(tkr); + tkr_dummy.clock = &dummy_clock; update_fast_timekeeper(&tkr_dummy, &tk_fast_mono); tkr = &tk->tkr_raw; memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy)); - tkr_dummy.read = dummy_clock_read; + tkr_dummy.clock = &dummy_clock; update_fast_timekeeper(&tkr_dummy, &tk_fast_raw); } @@ -649,11 +671,10 @@ static void timekeeping_update(struct timekeeper *tk, unsigned int action) */ static void timekeeping_forward_now(struct timekeeper *tk) { - struct clocksource *clock = tk->tkr_mono.clock; u64 cycle_now, delta; u64 nsec; - cycle_now = tk->tkr_mono.read(clock); + cycle_now = tk_clock_read(&tk->tkr_mono); delta = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last, tk->tkr_mono.mask); tk->tkr_mono.cycle_last = cycle_now; tk->tkr_raw.cycle_last = cycle_now; @@ -929,8 +950,7 @@ void ktime_get_snapshot(struct system_time_snapshot *systime_snapshot) do { seq = read_seqcount_begin(&tk_core.seq); - - now = tk->tkr_mono.read(tk->tkr_mono.clock); + now = tk_clock_read(&tk->tkr_mono); systime_snapshot->cs_was_changed_seq = tk->cs_was_changed_seq; systime_snapshot->clock_was_set_seq = tk->clock_was_set_seq; base_real = ktime_add(tk->tkr_mono.base, @@ -1108,7 +1128,7 @@ int get_device_system_crosststamp(int (*get_time_fn) * Check whether the system counter value provided by the * device driver is on the current timekeeping interval. */ - now = tk->tkr_mono.read(tk->tkr_mono.clock); + now = tk_clock_read(&tk->tkr_mono); interval_start = tk->tkr_mono.cycle_last; if (!cycle_between(interval_start, cycles, now)) { clock_was_set_seq = tk->clock_was_set_seq; @@ -1629,7 +1649,7 @@ void timekeeping_resume(void) * The less preferred source will only be tried if there is no better * usable source. The rtc part is handled separately in rtc core code. */ - cycle_now = tk->tkr_mono.read(clock); + cycle_now = tk_clock_read(&tk->tkr_mono); if ((clock->flags & CLOCK_SOURCE_SUSPEND_NONSTOP) && cycle_now > tk->tkr_mono.cycle_last) { u64 nsec, cyc_delta; @@ -2030,7 +2050,7 @@ void update_wall_time(void) #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET offset = real_tk->cycle_interval; #else - offset = clocksource_delta(tk->tkr_mono.read(tk->tkr_mono.clock), + offset = clocksource_delta(tk_clock_read(&tk->tkr_mono), tk->tkr_mono.cycle_last, tk->tkr_mono.mask); #endif From 3d88d56c5873f6eebe23e05c3da701960146b801 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 8 Jun 2017 16:44:21 -0700 Subject: [PATCH 0923/1065] time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting Due to how the MONOTONIC_RAW accumulation logic was handled, there is the potential for a 1ns discontinuity when we do accumulations. This small discontinuity has for the most part gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW in their vDSO clock_gettime implementation, we've seen failures with the inconsistency-check test in kselftest. This patch addresses the issue by using the same sub-ns accumulation handling that CLOCK_MONOTONIC uses, which avoids the issue for in-kernel users. Since the ARM64 vDSO implementation has its own clock_gettime calculation logic, this patch reduces the frequency of errors, but failures are still seen. The ARM64 vDSO will need to be updated to include the sub-nanosecond xtime_nsec values in its calculation for this issue to be completely fixed. Signed-off-by: John Stultz Tested-by: Daniel Mentz Cc: Prarit Bhargava Cc: Kevin Brodsky Cc: Richard Cochran Cc: Stephen Boyd Cc: Will Deacon Cc: "stable #4 . 8+" Cc: Miroslav Lichvar Link: http://lkml.kernel.org/r/1496965462-20003-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- include/linux/timekeeper_internal.h | 4 ++-- kernel/time/timekeeping.c | 19 ++++++++++--------- 2 files changed, 12 insertions(+), 11 deletions(-) diff --git a/include/linux/timekeeper_internal.h b/include/linux/timekeeper_internal.h index e9834ada4d0c..f7043ccca81c 100644 --- a/include/linux/timekeeper_internal.h +++ b/include/linux/timekeeper_internal.h @@ -57,7 +57,7 @@ struct tk_read_base { * interval. * @xtime_remainder: Shifted nano seconds left over when rounding * @cycle_interval - * @raw_interval: Raw nano seconds accumulated per NTP interval. + * @raw_interval: Shifted raw nano seconds accumulated per NTP interval. * @ntp_error: Difference between accumulated time and NTP time in ntp * shifted nano seconds. * @ntp_error_shift: Shift conversion between clock shifted nano seconds and @@ -99,7 +99,7 @@ struct timekeeper { u64 cycle_interval; u64 xtime_interval; s64 xtime_remainder; - u32 raw_interval; + u64 raw_interval; /* The ntp_tick_length() value currently being used. * This cached copy ensures we consistently apply the tick * length for an entire tick, as ntp_tick_length may change diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index eff94cb8e89e..b602c48cb841 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -280,7 +280,7 @@ static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock) /* Go back from cycles -> shifted ns */ tk->xtime_interval = interval * clock->mult; tk->xtime_remainder = ntpinterval - tk->xtime_interval; - tk->raw_interval = (interval * clock->mult) >> clock->shift; + tk->raw_interval = interval * clock->mult; /* if changing clocks, convert xtime_nsec shift units */ if (old_clock) { @@ -1996,7 +1996,7 @@ static u64 logarithmic_accumulation(struct timekeeper *tk, u64 offset, u32 shift, unsigned int *clock_set) { u64 interval = tk->cycle_interval << shift; - u64 raw_nsecs; + u64 snsec_per_sec; /* If the offset is smaller than a shifted interval, do nothing */ if (offset < interval) @@ -2011,14 +2011,15 @@ static u64 logarithmic_accumulation(struct timekeeper *tk, u64 offset, *clock_set |= accumulate_nsecs_to_secs(tk); /* Accumulate raw time */ - raw_nsecs = (u64)tk->raw_interval << shift; - raw_nsecs += tk->raw_time.tv_nsec; - if (raw_nsecs >= NSEC_PER_SEC) { - u64 raw_secs = raw_nsecs; - raw_nsecs = do_div(raw_secs, NSEC_PER_SEC); - tk->raw_time.tv_sec += raw_secs; + tk->tkr_raw.xtime_nsec += (u64)tk->raw_time.tv_nsec << tk->tkr_raw.shift; + tk->tkr_raw.xtime_nsec += tk->raw_interval << shift; + snsec_per_sec = (u64)NSEC_PER_SEC << tk->tkr_raw.shift; + while (tk->tkr_raw.xtime_nsec >= snsec_per_sec) { + tk->tkr_raw.xtime_nsec -= snsec_per_sec; + tk->raw_time.tv_sec++; } - tk->raw_time.tv_nsec = raw_nsecs; + tk->raw_time.tv_nsec = tk->tkr_raw.xtime_nsec >> tk->tkr_raw.shift; + tk->tkr_raw.xtime_nsec -= (u64)tk->raw_time.tv_nsec << tk->tkr_raw.shift; /* Accumulate error between NTP and clock interval */ tk->ntp_error += tk->ntp_tick << shift; From dbb236c1ceb697a559e0694ac4c9e7b9131d0b16 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 8 Jun 2017 16:44:22 -0700 Subject: [PATCH 0924/1065] arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW Recently vDSO support for CLOCK_MONOTONIC_RAW was added in 49eea433b326 ("arm64: Add support for CLOCK_MONOTONIC_RAW in clock_gettime() vDSO"). Noticing that the core timekeeping code never set tkr_raw.xtime_nsec, the vDSO implementation didn't bother exposing it via the data page and instead took the unshifted tk->raw_time.tv_nsec value which was then immediately shifted left in the vDSO code. Unfortunately, by accellerating the MONOTONIC_RAW clockid, it uncovered potential 1ns time inconsistencies caused by the timekeeping core not handing sub-ns resolution. Now that the core code has been fixed and is actually setting tkr_raw.xtime_nsec, we need to take that into account in the vDSO by adding it to the shifted raw_time value, in order to fix the user-visible inconsistency. Rather than do that at each use (and expand the data page in the process), instead perform the shift/addition operation when populating the data page and remove the shift from the vDSO code entirely. [jstultz: minor whitespace tweak, tried to improve commit message to make it more clear this fixes a regression] Reported-by: John Stultz Signed-off-by: Will Deacon Signed-off-by: John Stultz Tested-by: Daniel Mentz Acked-by: Kevin Brodsky Cc: Prarit Bhargava Cc: Richard Cochran Cc: Stephen Boyd Cc: "stable #4 . 8+" Cc: Miroslav Lichvar Link: http://lkml.kernel.org/r/1496965462-20003-4-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- arch/arm64/kernel/vdso.c | 5 +++-- arch/arm64/kernel/vdso/gettimeofday.S | 1 - 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index 41b6e31f8f55..d0cb007fa482 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -221,10 +221,11 @@ void update_vsyscall(struct timekeeper *tk) /* tkr_mono.cycle_last == tkr_raw.cycle_last */ vdso_data->cs_cycle_last = tk->tkr_mono.cycle_last; vdso_data->raw_time_sec = tk->raw_time.tv_sec; - vdso_data->raw_time_nsec = tk->raw_time.tv_nsec; + vdso_data->raw_time_nsec = (tk->raw_time.tv_nsec << + tk->tkr_raw.shift) + + tk->tkr_raw.xtime_nsec; vdso_data->xtime_clock_sec = tk->xtime_sec; vdso_data->xtime_clock_nsec = tk->tkr_mono.xtime_nsec; - /* tkr_raw.xtime_nsec == 0 */ vdso_data->cs_mono_mult = tk->tkr_mono.mult; vdso_data->cs_raw_mult = tk->tkr_raw.mult; /* tkr_mono.shift == tkr_raw.shift */ diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S index e00b4671bd7c..76320e920965 100644 --- a/arch/arm64/kernel/vdso/gettimeofday.S +++ b/arch/arm64/kernel/vdso/gettimeofday.S @@ -256,7 +256,6 @@ monotonic_raw: seqcnt_check fail=monotonic_raw /* All computations are done with left-shifted nsecs. */ - lsl x14, x14, x12 get_nsec_per_sec res=x9 lsl x9, x9, x12 From 842c08846420baa619fe3cb8c9af538efdb89428 Mon Sep 17 00:00:00 2001 From: Petr Mladek Date: Wed, 14 Jun 2017 10:54:52 +0200 Subject: [PATCH 0925/1065] livepatch: Fix stacking of patches with respect to RCU rcu_read_(un)lock(), list_*_rcu(), and synchronize_rcu() are used for a secure access and manipulation of the list of patches that modify the same function. In particular, it is the variable func_stack that is accessible from the ftrace handler via struct ftrace_ops and klp_ops. Of course, it synchronizes also some states of the patch on the top of the stack, e.g. func->transition in klp_ftrace_handler. At the same time, this mechanism guards also the manipulation of task->patch_state. It is modified according to the state of the transition and the state of the process. Now, all this works well as long as RCU works well. Sadly livepatching might get into some corner cases when this is not true. For example, RCU is not watching when rcu_read_lock() is taken in idle threads. It is because they might sleep and prevent reaching the grace period for too long. There are ways how to make RCU watching even in idle threads, see rcu_irq_enter(). But there is a small location inside RCU infrastructure when even this does not work. This small problematic location can be detected either before calling rcu_irq_enter() by rcu_irq_enter_disabled() or later by rcu_is_watching(). Sadly, there is no safe way how to handle it. Once we detect that RCU was not watching, we might see inconsistent state of the function stack and the related variables in klp_ftrace_handler(). Then we could do a wrong decision, use an incompatible implementation of the function and break the consistency of the system. We could warn but we could not avoid the damage. Fortunately, ftrace has similar problems and they seem to be solved well there. It uses a heavy weight implementation of some RCU operations. In particular, it replaces: + rcu_read_lock() with preempt_disable_notrace() + rcu_read_unlock() with preempt_enable_notrace() + synchronize_rcu() with schedule_on_each_cpu(sync_work) My understanding is that this is RCU implementation from a stone age. It meets the core RCU requirements but it is rather ineffective. Especially, it does not allow to batch or speed up the synchronize calls. On the other hand, it is very trivial. It allows to safely trace and/or livepatch even the RCU core infrastructure. And the effectiveness is a not a big issue because using ftrace or livepatches on productive systems is a rare operation. The safety is much more important than a negligible extra load. Note that the alternative implementation follows the RCU principles. Therefore, we could and actually must use list_*_rcu() variants when manipulating the func_stack. These functions allow to access the pointers in the right order and with the right barriers. But they do not use any other information that would be set only by rcu_read_lock(). Also note that there are actually two problems solved in ftrace: First, it cares about the consistency of RCU read sections. It is being solved the way as described and used in this patch. Second, ftrace needs to make sure that nobody is inside the dynamic trampoline when it is being freed. For this, it also calls synchronize_rcu_tasks() in preemptive kernel in ftrace_shutdown(). Livepatch has similar problem but it is solved by ftrace for free. klp_ftrace_handler() is a good guy and never sleeps. In addition, it is registered with FTRACE_OPS_FL_DYNAMIC. It causes that unregister_ftrace_function() calls: * schedule_on_each_cpu(ftrace_sync) - always * synchronize_rcu_tasks() - in preemptive kernel The effect is that nobody is neither inside the dynamic trampoline nor inside the ftrace handler after unregister_ftrace_function() returns. [jkosina@suse.cz: reformat changelog, fix comment] Signed-off-by: Petr Mladek Acked-by: Josh Poimboeuf Acked-by: Miroslav Benes Signed-off-by: Jiri Kosina --- kernel/livepatch/patch.c | 8 ++++++-- kernel/livepatch/transition.c | 36 ++++++++++++++++++++++++++++++----- 2 files changed, 37 insertions(+), 7 deletions(-) diff --git a/kernel/livepatch/patch.c b/kernel/livepatch/patch.c index f8269036bf0b..52c4e907c14b 100644 --- a/kernel/livepatch/patch.c +++ b/kernel/livepatch/patch.c @@ -59,7 +59,11 @@ static void notrace klp_ftrace_handler(unsigned long ip, ops = container_of(fops, struct klp_ops, fops); - rcu_read_lock(); + /* + * A variant of synchronize_sched() is used to allow patching functions + * where RCU is not watching, see klp_synchronize_transition(). + */ + preempt_disable_notrace(); func = list_first_or_null_rcu(&ops->func_stack, struct klp_func, stack_node); @@ -115,7 +119,7 @@ static void notrace klp_ftrace_handler(unsigned long ip, klp_arch_set_pc(regs, (unsigned long)func->new_func); unlock: - rcu_read_unlock(); + preempt_enable_notrace(); } /* diff --git a/kernel/livepatch/transition.c b/kernel/livepatch/transition.c index adc0cc64aa4b..b004a1fb6032 100644 --- a/kernel/livepatch/transition.c +++ b/kernel/livepatch/transition.c @@ -48,6 +48,28 @@ static void klp_transition_work_fn(struct work_struct *work) } static DECLARE_DELAYED_WORK(klp_transition_work, klp_transition_work_fn); +/* + * This function is just a stub to implement a hard force + * of synchronize_sched(). This requires synchronizing + * tasks even in userspace and idle. + */ +static void klp_sync(struct work_struct *work) +{ +} + +/* + * We allow to patch also functions where RCU is not watching, + * e.g. before user_exit(). We can not rely on the RCU infrastructure + * to do the synchronization. Instead hard force the sched synchronization. + * + * This approach allows to use RCU functions for manipulating func_stack + * safely. + */ +static void klp_synchronize_transition(void) +{ + schedule_on_each_cpu(klp_sync); +} + /* * The transition to the target patch state is complete. Clean up the data * structures. @@ -73,7 +95,7 @@ static void klp_complete_transition(void) * func->transition gets cleared, the handler may choose a * removed function. */ - synchronize_rcu(); + klp_synchronize_transition(); } if (klp_transition_patch->immediate) @@ -92,7 +114,7 @@ static void klp_complete_transition(void) /* Prevent klp_ftrace_handler() from seeing KLP_UNDEFINED state */ if (klp_target_state == KLP_PATCHED) - synchronize_rcu(); + klp_synchronize_transition(); read_lock(&tasklist_lock); for_each_process_thread(g, task) { @@ -136,7 +158,11 @@ void klp_cancel_transition(void) */ void klp_update_patch_state(struct task_struct *task) { - rcu_read_lock(); + /* + * A variant of synchronize_sched() is used to allow patching functions + * where RCU is not watching, see klp_synchronize_transition(). + */ + preempt_disable_notrace(); /* * This test_and_clear_tsk_thread_flag() call also serves as a read @@ -153,7 +179,7 @@ void klp_update_patch_state(struct task_struct *task) if (test_and_clear_tsk_thread_flag(task, TIF_PATCH_PENDING)) task->patch_state = READ_ONCE(klp_target_state); - rcu_read_unlock(); + preempt_enable_notrace(); } /* @@ -539,7 +565,7 @@ void klp_reverse_transition(void) clear_tsk_thread_flag(idle_task(cpu), TIF_PATCH_PENDING); /* Let any remaining calls to klp_update_patch_state() complete */ - synchronize_rcu(); + klp_synchronize_transition(); klp_start_transition(); } From 6c7515c61ffa0985c57abd8892c7928b52b9a306 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Thu, 1 Jun 2017 22:08:20 +0200 Subject: [PATCH 0926/1065] gpio: mvebu: change compatible string for PWM support As it turns out more than just Armada 370 and XP support using GPIO lines as PWM lines. For example the Armada 38x family has the same hardware support. As such "marvell,armada-370-xp-gpio" for the compatible string is a misnomer. Change the compatible string to "marvell,armada-370-gpio" before the driver makes it out of the -rc stage. This also follows the practice of using only the first device family supported as part of the name. Also update the documentation and comments in the code accordingly. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Ralph Sennhauser Acked-by: Gregory CLEMENT Acked-by: Rob Herring Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/gpio/gpio-mvebu.txt | 6 +++--- drivers/gpio/gpio-mvebu.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt index 42c3bb2d53e8..01e331a5f3e7 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -41,9 +41,9 @@ Required properties: Optional properties: In order to use the GPIO lines in PWM mode, some additional optional -properties are required. Only Armada 370 and XP support these properties. +properties are required. -- compatible: Must contain "marvell,armada-370-xp-gpio" +- compatible: Must contain "marvell,armada-370-gpio" - reg: an additional register set is needed, for the GPIO Blink Counter on/off registers. @@ -71,7 +71,7 @@ Example: }; gpio1: gpio@18140 { - compatible = "marvell,armada-370-xp-gpio"; + compatible = "marvell,armada-370-gpio"; reg = <0x18140 0x40>, <0x181c8 0x08>; reg-names = "gpio", "pwm"; ngpios = <17>; diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 5104b6398139..c83ea68be792 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -721,7 +721,7 @@ static int mvebu_pwm_probe(struct platform_device *pdev, u32 set; if (!of_device_is_compatible(mvchip->chip.of_node, - "marvell,armada-370-xp-gpio")) + "marvell,armada-370-gpio")) return 0; if (IS_ERR(mvchip->clk)) @@ -852,7 +852,7 @@ static const struct of_device_id mvebu_gpio_of_match[] = { .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP, }, { - .compatible = "marvell,armada-370-xp-gpio", + .compatible = "marvell,armada-370-gpio", .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION, }, { @@ -1128,7 +1128,7 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip); } - /* Armada 370/XP has simple PWM support for GPIO lines */ + /* Some MVEBU SoCs have simple PWM support for GPIO lines */ if (IS_ENABLED(CONFIG_PWM)) return mvebu_pwm_probe(pdev, mvchip, id); From e27a9eca5d4a392b96ce5d5238c8d637bcb0a52c Mon Sep 17 00:00:00 2001 From: James Cowgill Date: Tue, 20 Jun 2017 10:57:51 +0100 Subject: [PATCH 0927/1065] KVM: MIPS: Fix maybe-uninitialized build failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit fixes a "maybe-uninitialized" build failure in arch/mips/kvm/tlb.c when KVM, DYNAMIC_DEBUG and JUMP_LABEL are all enabled. The failure is: In file included from ./include/linux/printk.h:329:0, from ./include/linux/kernel.h:13, from ./include/asm-generic/bug.h:15, from ./arch/mips/include/asm/bug.h:41, from ./include/linux/bug.h:4, from ./include/linux/thread_info.h:11, from ./include/asm-generic/current.h:4, from ./arch/mips/include/generated/asm/current.h:1, from ./include/linux/sched.h:11, from arch/mips/kvm/tlb.c:13: arch/mips/kvm/tlb.c: In function ‘kvm_mips_host_tlb_inv’: ./include/linux/dynamic_debug.h:126:3: error: ‘idx_kernel’ may be used uninitialized in this function [-Werror=maybe-uninitialized] __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \ ^~~~~~~~~~~~~~~~~~ arch/mips/kvm/tlb.c:169:16: note: ‘idx_kernel’ was declared here int idx_user, idx_kernel; ^~~~~~~~~~ There is a similar error relating to "idx_user". Both errors were observed with GCC 6. As far as I can tell, it is impossible for either idx_user or idx_kernel to be uninitialized when they are later read in the calls to kvm_debug, but to satisfy the compiler, add zero initializers to both variables. Signed-off-by: James Cowgill Fixes: 57e3869cfaae ("KVM: MIPS/TLB: Generalise host TLB invalidate to kernel ASID") Cc: # 4.11+ Acked-by: James Hogan Signed-off-by: Radim Krčmář --- arch/mips/kvm/tlb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/mips/kvm/tlb.c b/arch/mips/kvm/tlb.c index 7c6336dd2638..7cd92166a0b9 100644 --- a/arch/mips/kvm/tlb.c +++ b/arch/mips/kvm/tlb.c @@ -166,7 +166,11 @@ static int _kvm_mips_host_tlb_inv(unsigned long entryhi) int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long va, bool user, bool kernel) { - int idx_user, idx_kernel; + /* + * Initialize idx_user and idx_kernel to workaround bogus + * maybe-initialized warning when using GCC 6. + */ + int idx_user = 0, idx_kernel = 0; unsigned long flags, old_entryhi; local_irq_save(flags); From 9e69672e90ccff10dab6f0c9545226a886e5973c Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Wed, 14 Jun 2017 17:13:14 +0200 Subject: [PATCH 0928/1065] dt-bindings: mfd: Update STM32 timers clock names Clock name has been updated during driver/DT binding review: https://lkml.org/lkml/2016/12/13/718 Update DT binding doc to reflect this. Fixes: 8f9359c6c6a0 (dt-bindings: mfd: Add bindings for STM32 Timers driver) Signed-off-by: Fabrice Gasnier Acked-by: Benjamin Gaignard Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/stm32-timers.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt index bbd083f5600a..1db6e0057a63 100644 --- a/Documentation/devicetree/bindings/mfd/stm32-timers.txt +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt @@ -31,7 +31,7 @@ Example: compatible = "st,stm32-timers"; reg = <0x40010000 0x400>; clocks = <&rcc 0 160>; - clock-names = "clk_int"; + clock-names = "int"; pwm { compatible = "st,stm32-pwm"; From 05b4017b37f1fce4b7185f138126dd8decdb381f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Jun 2017 10:55:11 -0400 Subject: [PATCH 0929/1065] drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We were using the wrong structure which lead to an overflow on some boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101387 Acked-by: Chunming Zhou Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/atombios_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_crtc.c b/drivers/gpu/drm/amd/amdgpu/atombios_crtc.c index 8c9bc75a9c2d..8a0818b23ea4 100644 --- a/drivers/gpu/drm/amd/amdgpu/atombios_crtc.c +++ b/drivers/gpu/drm/amd/amdgpu/atombios_crtc.c @@ -165,7 +165,7 @@ void amdgpu_atombios_crtc_powergate(struct drm_crtc *crtc, int state) struct drm_device *dev = crtc->dev; struct amdgpu_device *adev = dev->dev_private; int index = GetIndexIntoMasterTable(COMMAND, EnableDispPowerGating); - ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1 args; + ENABLE_DISP_POWER_GATING_PS_ALLOCATION args; memset(&args, 0, sizeof(args)); @@ -178,7 +178,7 @@ void amdgpu_atombios_crtc_powergate(struct drm_crtc *crtc, int state) void amdgpu_atombios_crtc_powergate_init(struct amdgpu_device *adev) { int index = GetIndexIntoMasterTable(COMMAND, EnableDispPowerGating); - ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1 args; + ENABLE_DISP_POWER_GATING_PS_ALLOCATION args; memset(&args, 0, sizeof(args)); From 52b482b0f4fd6d5267faf29fe91398e203f3c230 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Jun 2017 11:12:28 -0400 Subject: [PATCH 0930/1065] drm/amdgpu: adjust default display clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Increase the default display clock on newer asics to accomodate some high res modes with really high refresh rates. bug: https://bugs.freedesktop.org/show_bug.cgi?id=93826 Acked-by: Chunming Zhou Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c index 1cf78f4dd339..1e8e1123ddf4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c @@ -693,6 +693,10 @@ int amdgpu_atombios_get_clock_info(struct amdgpu_device *adev) DRM_INFO("Changing default dispclk from %dMhz to 600Mhz\n", adev->clock.default_dispclk / 100); adev->clock.default_dispclk = 60000; + } else if (adev->clock.default_dispclk <= 60000) { + DRM_INFO("Changing default dispclk from %dMhz to 625Mhz\n", + adev->clock.default_dispclk / 100); + adev->clock.default_dispclk = 62500; } adev->clock.dp_extclk = le16_to_cpu(firmware_info->info_21.usUniphyDPModeExtClkFreq); From 4eb59793cca00b0e629b6d55b5abb5acb82c5868 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 19 Jun 2017 12:52:47 -0400 Subject: [PATCH 0931/1065] drm/radeon: add a PX quirk for another K53TK variant Disable PX on these systems. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 6ecf42783d4b..0a6444d72000 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -136,6 +136,10 @@ static struct radeon_px_quirk radeon_px_quirk_list[] = { * https://bugzilla.kernel.org/show_bug.cgi?id=51381 */ { PCI_VENDOR_ID_ATI, 0x6840, 0x1043, 0x2122, RADEON_PX_QUIRK_DISABLE_PX }, + /* Asus K53TK laptop with AMD A6-3420M APU and Radeon 7670m GPU + * https://bugs.freedesktop.org/show_bug.cgi?id=101491 + */ + { PCI_VENDOR_ID_ATI, 0x6741, 0x1043, 0x2122, RADEON_PX_QUIRK_DISABLE_PX }, /* macbook pro 8.2 */ { PCI_VENDOR_ID_ATI, 0x6741, PCI_VENDOR_ID_APPLE, 0x00e2, RADEON_PX_QUIRK_LONG_WAKEUP }, { 0, 0, 0, 0, 0 }, From acfd6ee4fa7ebeee75511825fe02be3f7ac1d668 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 19 Jun 2017 15:59:58 -0400 Subject: [PATCH 0932/1065] drm/radeon: add a quirk for Toshiba Satellite L20-183 Fixes resume from suspend. bug: https://bugzilla.kernel.org/show_bug.cgi?id=196121 Reported-by: Przemek Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_combios.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 432480ff9d22..3178ba0c537c 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -3393,6 +3393,13 @@ void radeon_combios_asic_init(struct drm_device *dev) rdev->pdev->subsystem_vendor == 0x103c && rdev->pdev->subsystem_device == 0x280a) return; + /* quirk for rs4xx Toshiba Sattellite L20-183 latop to make it resume + * - it hangs on resume inside the dynclk 1 table. + */ + if (rdev->family == CHIP_RS400 && + rdev->pdev->subsystem_vendor == 0x1179 && + rdev->pdev->subsystem_device == 0xff31) + return; /* DYN CLK 1 */ table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE); From bdaf32c3ced3d111b692f0af585f880f82d686c5 Mon Sep 17 00:00:00 2001 From: Serhey Popovych Date: Fri, 16 Jun 2017 15:44:47 +0300 Subject: [PATCH 0933/1065] fib_rules: Resolve goto rules target on delete We should avoid marking goto rules unresolved when their target is actually reachable after rule deletion. Consolder following sample scenario: # ip -4 ru sh 0: from all lookup local 32000: from all goto 32100 32100: from all lookup main 32100: from all lookup default 32766: from all lookup main 32767: from all lookup default # ip -4 ru del pref 32100 table main # ip -4 ru sh 0: from all lookup local 32000: from all goto 32100 [unresolved] 32100: from all lookup default 32766: from all lookup main 32767: from all lookup default After removal of first rule with preference 32100 we mark all goto rules as unreachable, even when rule with same preference as removed one still present. Check if next rule with same preference is available and make all rules with goto action pointing to it. Signed-off-by: Serhey Popovych Signed-off-by: David S. Miller --- net/core/fib_rules.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index f21c4d3aeae0..3bba291c6c32 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -568,7 +568,7 @@ int fib_nl_delrule(struct sk_buff *skb, struct nlmsghdr *nlh, struct net *net = sock_net(skb->sk); struct fib_rule_hdr *frh = nlmsg_data(nlh); struct fib_rules_ops *ops = NULL; - struct fib_rule *rule, *tmp; + struct fib_rule *rule, *r; struct nlattr *tb[FRA_MAX+1]; struct fib_kuid_range range; int err = -EINVAL; @@ -668,16 +668,23 @@ int fib_nl_delrule(struct sk_buff *skb, struct nlmsghdr *nlh, /* * Check if this rule is a target to any of them. If so, + * adjust to the next one with the same preference or * disable them. As this operation is eventually very - * expensive, it is only performed if goto rules have - * actually been added. + * expensive, it is only performed if goto rules, except + * current if it is goto rule, have actually been added. */ if (ops->nr_goto_rules > 0) { - list_for_each_entry(tmp, &ops->rules_list, list) { - if (rtnl_dereference(tmp->ctarget) == rule) { - RCU_INIT_POINTER(tmp->ctarget, NULL); + struct fib_rule *n; + + n = list_next_entry(rule, list); + if (&n->list == &ops->rules_list || n->pref != rule->pref) + n = NULL; + list_for_each_entry(r, &ops->rules_list, list) { + if (rtnl_dereference(r->ctarget) != rule) + continue; + rcu_assign_pointer(r->ctarget, n); + if (!n) ops->unresolved_rules++; - } } } From fe420d87bbc234015b4195dd239b7d3052b140ea Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Fri, 16 Jun 2017 19:24:00 +0200 Subject: [PATCH 0934/1065] net/core: remove explicit do_softirq() from busy_poll_stop() Since commit 217f69743681 ("net: busy-poll: allow preemption in sk_busy_loop()") there is an explicit do_softirq() invocation after local_bh_enable() has been invoked. I don't understand why we need this because local_bh_enable() will invoke do_softirq() once the softirq counter reached zero and we have softirq-related work pending. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller --- net/core/dev.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 6d60149287a1..7243421c9783 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5206,8 +5206,6 @@ static void busy_poll_stop(struct napi_struct *napi, void *have_poll_lock) if (rc == BUSY_POLL_BUDGET) __napi_schedule(napi); local_bh_enable(); - if (local_softirq_pending()) - do_softirq(); } void napi_busy_loop(unsigned int napi_id, From 5567e989198b5a8d78f9b5868e48fc9f4726bdd5 Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Mon, 19 Jun 2017 18:04:16 +0300 Subject: [PATCH 0935/1065] fsl/fman: propagate dma_ops Make sure dma_ops are set, to be later used by the Ethernet driver. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fman/mac.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c index 0b31f8502ada..6e67d22fd0d5 100644 --- a/drivers/net/ethernet/freescale/fman/mac.c +++ b/drivers/net/ethernet/freescale/fman/mac.c @@ -623,6 +623,8 @@ static struct platform_device *dpaa_eth_add_device(int fman_id, goto no_mem; } + set_dma_ops(&pdev->dev, get_dma_ops(priv->dev)); + ret = platform_device_add_data(pdev, &data, sizeof(data)); if (ret) goto err; From fb52728a9294d97de808795b8e3f60fb8de50c00 Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Mon, 19 Jun 2017 18:04:17 +0300 Subject: [PATCH 0936/1065] dpaa_eth: reuse the dma_ops provided by the FMan MAC device Remove the use of arch_setup_dma_ops() that was not exported and was breaking loadable module compilation. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index 9a520e4f0df9..290ad0563320 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -2647,7 +2647,7 @@ static int dpaa_eth_probe(struct platform_device *pdev) priv->buf_layout[TX].priv_data_size = DPAA_TX_PRIV_DATA_SIZE; /* Tx */ /* device used for DMA mapping */ - arch_setup_dma_ops(dev, 0, 0, NULL, false); + set_dma_ops(dev, get_dma_ops(&pdev->dev)); err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40)); if (err) { dev_err(dev, "dma_coerce_mask_and_coherent() failed\n"); From 7e113321eccba2b52c0e9d11129d370c9511e4db Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 19 Jun 2017 18:05:41 +0200 Subject: [PATCH 0937/1065] dt-bindings: net: sms911x: Add missing optional VDD regulators The lan911x family of devices require supplying from 3.3 V power supplies (connected to VDD_IO, VDD_A and VREG_3.3 pins). The existing driver however obtains only VDD_IO and VDD_A regulators in an optional way so document this in bindings. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Linus Walleij Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/smsc911x.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt index 16c3a9501f5d..acfafc8e143c 100644 --- a/Documentation/devicetree/bindings/net/smsc911x.txt +++ b/Documentation/devicetree/bindings/net/smsc911x.txt @@ -27,6 +27,7 @@ Optional properties: of the device. On many systems this is wired high so the device goes out of reset at power-on, but if it is under program control, this optional GPIO can wake up in response to it. +- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies Examples: From 07f615574f8ac499875b21c1142f26308234a92c Mon Sep 17 00:00:00 2001 From: Serhey Popovych Date: Tue, 20 Jun 2017 13:29:25 +0300 Subject: [PATCH 0938/1065] ipv6: Do not leak throw route references While commit 73ba57bfae4a ("ipv6: fix backtracking for throw routes") does good job on error propagation to the fib_rules_lookup() in fib rules core framework that also corrects throw routes handling, it does not solve route reference leakage problem happened when we return -EAGAIN to the fib_rules_lookup() and leave routing table entry referenced in arg->result. If rule with matched throw route isn't last matched in the list we overwrite arg->result losing reference on throw route stored previously forever. We also partially revert commit ab997ad40839 ("ipv6: fix the incorrect return value of throw route") since we never return routing table entry with dst.error == -EAGAIN when CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point to check for RTF_REJECT flag since it is always set throw route. Fixes: 73ba57bfae4a ("ipv6: fix backtracking for throw routes") Signed-off-by: Serhey Popovych Signed-off-by: David S. Miller --- net/ipv6/fib6_rules.c | 22 ++++++---------------- net/ipv6/ip6_fib.c | 3 +-- 2 files changed, 7 insertions(+), 18 deletions(-) diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c index eea23b57c6a5..ec849d88a662 100644 --- a/net/ipv6/fib6_rules.c +++ b/net/ipv6/fib6_rules.c @@ -32,7 +32,6 @@ struct fib6_rule { struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6, int flags, pol_lookup_t lookup) { - struct rt6_info *rt; struct fib_lookup_arg arg = { .lookup_ptr = lookup, .flags = FIB_LOOKUP_NOREF, @@ -44,21 +43,11 @@ struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6, fib_rules_lookup(net->ipv6.fib6_rules_ops, flowi6_to_flowi(fl6), flags, &arg); - rt = arg.result; + if (arg.result) + return arg.result; - if (!rt) { - dst_hold(&net->ipv6.ip6_null_entry->dst); - return &net->ipv6.ip6_null_entry->dst; - } - - if (rt->rt6i_flags & RTF_REJECT && - rt->dst.error == -EAGAIN) { - ip6_rt_put(rt); - rt = net->ipv6.ip6_null_entry; - dst_hold(&rt->dst); - } - - return &rt->dst; + dst_hold(&net->ipv6.ip6_null_entry->dst); + return &net->ipv6.ip6_null_entry->dst; } static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp, @@ -121,7 +110,8 @@ static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp, flp6->saddr = saddr; } err = rt->dst.error; - goto out; + if (err != -EAGAIN) + goto out; } again: ip6_rt_put(rt); diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index d4bf2c68a545..e6b78ba0e636 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -289,8 +289,7 @@ struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6, struct rt6_info *rt; rt = lookup(net, net->ipv6.fib6_main_tbl, fl6, flags); - if (rt->rt6i_flags & RTF_REJECT && - rt->dst.error == -EAGAIN) { + if (rt->dst.error == -EAGAIN) { ip6_rt_put(rt); rt = net->ipv6.ip6_null_entry; dst_hold(&rt->dst); From db833d40ad3263b2ee3b59a1ba168bb3cfed8137 Mon Sep 17 00:00:00 2001 From: Serhey Popovych Date: Tue, 20 Jun 2017 14:35:23 +0300 Subject: [PATCH 0939/1065] rtnetlink: add IFLA_GROUP to ifla_policy Network interface groups support added while ago, however there is no IFLA_GROUP attribute description in policy and netlink message size calculations until now. Add IFLA_GROUP attribute to the policy. Fixes: cbda10fa97d7 ("net_device: add support for network device groups") Signed-off-by: Serhey Popovych Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 5e61456f6bc7..467a2f4510a7 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -931,6 +931,7 @@ static noinline size_t if_nlmsg_size(const struct net_device *dev, + nla_total_size(1) /* IFLA_LINKMODE */ + nla_total_size(4) /* IFLA_CARRIER_CHANGES */ + nla_total_size(4) /* IFLA_LINK_NETNSID */ + + nla_total_size(4) /* IFLA_GROUP */ + nla_total_size(ext_filter_mask & RTEXT_FILTER_VF ? 4 : 0) /* IFLA_NUM_VF */ + rtnl_vfinfo_size(dev, ext_filter_mask) /* IFLA_VFINFO_LIST */ @@ -1468,6 +1469,7 @@ static const struct nla_policy ifla_policy[IFLA_MAX+1] = { [IFLA_LINK_NETNSID] = { .type = NLA_S32 }, [IFLA_PROTO_DOWN] = { .type = NLA_U8 }, [IFLA_XDP] = { .type = NLA_NESTED }, + [IFLA_GROUP] = { .type = NLA_U32 }, }; static const struct nla_policy ifla_info_policy[IFLA_INFO_MAX+1] = { From 57f0c9cf58ff7fe479137ab847a886d0eed3ad1d Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Tue, 20 Jun 2017 13:08:51 +0100 Subject: [PATCH 0940/1065] sfc: remove duplicate up_write on VF filter_sem Somehow two copies of the line 'up_write(&vf->efx->filter_sem);' got into efx_ef10_sriov_set_vf_vlan(). This would put the mutex in a bad state and cause all subsequent down attempts to hang. Fixes: 671b53eec2ed ("sfc: Ensure down_write(&filter_sem) and up_write() are matched before calling efx_net_open()") Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10_sriov.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c index b7e4345c990d..019cef1d3cf7 100644 --- a/drivers/net/ethernet/sfc/ef10_sriov.c +++ b/drivers/net/ethernet/sfc/ef10_sriov.c @@ -661,8 +661,6 @@ restore_filters: up_write(&vf->efx->filter_sem); mutex_unlock(&vf->efx->mac_lock); - up_write(&vf->efx->filter_sem); - rc2 = efx_net_open(vf->efx->net_dev); if (rc2) goto reset_nic; From 05cf0d1bf4ed722aefff92775244dbe9e1bb4679 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Tue, 20 Jun 2017 14:32:41 +0200 Subject: [PATCH 0941/1065] net: stmmac: free an skb first when there are no longer any descriptors using it When having the skb pointer in the first descriptor, stmmac_tx_clean can get called at a moment where the IP has only cleared the own bit of the first descriptor, thus freeing the skb, even though there can be several descriptors whose buffers point into the same skb. By simply moving the skb pointer from the first descriptor to the last descriptor, a skb will get freed only when the IP has cleared the own bit of all the descriptors that are using that skb. Signed-off-by: Niklas Cassel Signed-off-by: David S. Miller --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 20 +++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index d16d11bfc046..6e4cbc6ce0ef 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2831,7 +2831,6 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) tx_q->tx_skbuff_dma[first_entry].buf = des; tx_q->tx_skbuff_dma[first_entry].len = skb_headlen(skb); - tx_q->tx_skbuff[first_entry] = skb; first->des0 = cpu_to_le32(des); @@ -2865,6 +2864,14 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) tx_q->tx_skbuff_dma[tx_q->cur_tx].last_segment = true; + /* Only the last descriptor gets to point to the skb. */ + tx_q->tx_skbuff[tx_q->cur_tx] = skb; + + /* We've used all descriptors we need for this skb, however, + * advance cur_tx so that it references a fresh descriptor. + * ndo_start_xmit will fill this descriptor the next time it's + * called and stmmac_tx_clean may clean up to this descriptor. + */ tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, DMA_TX_SIZE); if (unlikely(stmmac_tx_avail(priv, queue) <= (MAX_SKB_FRAGS + 1))) { @@ -2998,8 +3005,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) first = desc; - tx_q->tx_skbuff[first_entry] = skb; - enh_desc = priv->plat->enh_desc; /* To program the descriptors according to the size of the frame */ if (enh_desc) @@ -3047,8 +3052,15 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) skb->len); } - entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE); + /* Only the last descriptor gets to point to the skb. */ + tx_q->tx_skbuff[entry] = skb; + /* We've used all descriptors we need for this skb, however, + * advance cur_tx so that it references a fresh descriptor. + * ndo_start_xmit will fill this descriptor the next time it's + * called and stmmac_tx_clean may clean up to this descriptor. + */ + entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE); tx_q->cur_tx = entry; if (netif_msg_pktdata(priv)) { From 9f93d87cba63e3d18629261243b1f633519eabb5 Mon Sep 17 00:00:00 2001 From: Marcin Nowakowski Date: Fri, 9 Jun 2017 09:04:05 +0200 Subject: [PATCH 0942/1065] irqchip/mips-gic: Mark count and compare accessors notrace gic_read_count(), gic_write_compare() and gic_write_cpu_compare() are often used in a sequence to update the compare register with a count value increased by a small offset. With small delta values used to update the compare register, the time to update function trace for these operations may be longer than the update timeout leading to update failure. Signed-off-by: Marcin Nowakowski Signed-off-by: Thomas Gleixner Cc: Marc Zyngier Cc: linux-mips@linux-mips.org Cc: Jason Cooper Link: http://lkml.kernel.org/r/1496991845-27031-1-git-send-email-marcin.nowakowski@imgtec.com --- drivers/irqchip/irq-mips-gic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index eb7fbe159963..929f8558bf1c 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -140,7 +140,7 @@ static inline void gic_map_to_vpe(unsigned int intr, unsigned int vpe) } #ifdef CONFIG_CLKSRC_MIPS_GIC -u64 gic_read_count(void) +u64 notrace gic_read_count(void) { unsigned int hi, hi2, lo; @@ -167,7 +167,7 @@ unsigned int gic_get_count_width(void) return bits; } -void gic_write_compare(u64 cnt) +void notrace gic_write_compare(u64 cnt) { if (mips_cm_is64) { gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE), cnt); @@ -179,7 +179,7 @@ void gic_write_compare(u64 cnt) } } -void gic_write_cpu_compare(u64 cnt, int cpu) +void notrace gic_write_cpu_compare(u64 cnt, int cpu) { unsigned long flags; From b4846fc3c8559649277e3e4e6b5cec5348a8d208 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 20 Jun 2017 10:46:27 -0700 Subject: [PATCH 0943/1065] igmp: add a missing spin_lock_init() Andrey reported a lockdep warning on non-initialized spinlock: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 4099 Comm: a.out Not tainted 4.12.0-rc6+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x717/0x1aa0 kernel/locking/lockdep.c:755 ? 0xffffffffa0000000 __lock_acquire+0x269/0x3690 kernel/locking/lockdep.c:3255 lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855 __raw_spin_lock_bh ./include/linux/spinlock_api_smp.h:135 _raw_spin_lock_bh+0x36/0x50 kernel/locking/spinlock.c:175 spin_lock_bh ./include/linux/spinlock.h:304 ip_mc_clear_src+0x27/0x1e0 net/ipv4/igmp.c:2076 igmpv3_clear_delrec+0xee/0x4f0 net/ipv4/igmp.c:1194 ip_mc_destroy_dev+0x4e/0x190 net/ipv4/igmp.c:1736 We miss a spin_lock_init() in igmpv3_add_delrec(), probably because previously we never use it on this code path. Since we already unlink it from the global mc_tomb list, it is probably safe not to acquire this spinlock here. It does not harm to have it although, to avoid conditional locking. Fixes: c38b7d327aaf ("igmp: acquire pmc lock for ip_mc_clear_src()") Reported-by: Andrey Konovalov Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 8f6b5bbcbf69..ec9a396fa466 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -1112,6 +1112,7 @@ static void igmpv3_add_delrec(struct in_device *in_dev, struct ip_mc_list *im) pmc = kzalloc(sizeof(*pmc), GFP_KERNEL); if (!pmc) return; + spin_lock_init(&pmc->lock); spin_lock_bh(&im->lock); pmc->interface = im->interface; in_dev_hold(in_dev); From 8a7b0d8e8d9962ec3b2ae64dd4e86d68a6fb9220 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 5 May 2017 08:30:40 +0300 Subject: [PATCH 0944/1065] CIFS: Set ->should_dirty in cifs_user_readv() The current code causes a static checker warning because ITER_IOVEC is zero so the condition is never true. Fixes: 6685c5e2d1ac ("CIFS: Add asynchronous read support through kernel AIO") Signed-off-by: Dan Carpenter Signed-off-by: Steve French --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 0fd081bd2a2f..fcef70602b27 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3271,7 +3271,7 @@ ssize_t cifs_user_readv(struct kiocb *iocb, struct iov_iter *to) if (!is_sync_kiocb(iocb)) ctx->iocb = iocb; - if (to->type & ITER_IOVEC) + if (to->type == ITER_IOVEC) ctx->should_dirty = true; rc = setup_aio_ctx_iter(ctx, to, READ); From ecf3411a121e7a653e309ff50a820ffa87c537f8 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 17 May 2017 19:24:15 +0100 Subject: [PATCH 0945/1065] CIFS: check if pages is null rather than bv for a failed allocation pages is being allocated however a null check on bv is being used to see if the allocation failed. Fix this by checking if pages is null. Detected by CoverityScan, CID#1432974 ("Logically dead code") Fixes: ccf7f4088af2dd ("CIFS: Add asynchronous context to support kernel AIO") Signed-off-by: Colin Ian King Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index b08531977daa..3b147dc6af63 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -810,7 +810,7 @@ setup_aio_ctx_iter(struct cifs_aio_ctx *ctx, struct iov_iter *iter, int rw) if (!pages) { pages = vmalloc(max_pages * sizeof(struct page *)); - if (!bv) { + if (!pages) { kvfree(bv); return -ENOMEM; } From dcd87838c06f05ab7650b249ebf0d5b57ae63e1e Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Tue, 6 Jun 2017 16:58:58 -0700 Subject: [PATCH 0946/1065] CIFS: Improve readdir verbosity Downgrade the loglevel for SMB2 to prevent filling the log with messages if e.g. readdir was interrupted. Also make SMB2 and SMB1 codepaths do the same logging during readdir. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French CC: Stable --- fs/cifs/smb1ops.c | 9 +++++++-- fs/cifs/smb2ops.c | 4 ++-- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c index 27bc360c7ffd..a723df3e0197 100644 --- a/fs/cifs/smb1ops.c +++ b/fs/cifs/smb1ops.c @@ -849,8 +849,13 @@ cifs_query_dir_first(const unsigned int xid, struct cifs_tcon *tcon, struct cifs_fid *fid, __u16 search_flags, struct cifs_search_info *srch_inf) { - return CIFSFindFirst(xid, tcon, path, cifs_sb, - &fid->netfid, search_flags, srch_inf, true); + int rc; + + rc = CIFSFindFirst(xid, tcon, path, cifs_sb, + &fid->netfid, search_flags, srch_inf, true); + if (rc) + cifs_dbg(FYI, "find first failed=%d\n", rc); + return rc; } static int diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index c58691834eb2..59726013375b 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -982,7 +982,7 @@ smb2_query_dir_first(const unsigned int xid, struct cifs_tcon *tcon, rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL); kfree(utf16_path); if (rc) { - cifs_dbg(VFS, "open dir failed\n"); + cifs_dbg(FYI, "open dir failed rc=%d\n", rc); return rc; } @@ -992,7 +992,7 @@ smb2_query_dir_first(const unsigned int xid, struct cifs_tcon *tcon, rc = SMB2_query_directory(xid, tcon, fid->persistent_fid, fid->volatile_fid, 0, srch_inf); if (rc) { - cifs_dbg(VFS, "query directory failed\n"); + cifs_dbg(FYI, "query directory failed rc=%d\n", rc); SMB2_close(xid, tcon, fid->persistent_fid, fid->volatile_fid); } return rc; From e125f5284f81bbb765a504494622b45c02faf978 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 7 Jun 2017 00:33:45 +0100 Subject: [PATCH 0947/1065] cifs: remove redundant return in cifs_creation_time_get There is a redundant return in function cifs_creation_time_get that appears to be old vestigial code than can be removed. So remove it. Detected by CoverityScan, CID#1361924 ("Structurally dead code") Signed-off-by: Colin Ian King Signed-off-by: Steve French --- fs/cifs/xattr.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c index 3cb5c9e2d4e7..de50e749ff05 100644 --- a/fs/cifs/xattr.c +++ b/fs/cifs/xattr.c @@ -188,8 +188,6 @@ static int cifs_creation_time_get(struct dentry *dentry, struct inode *inode, pcreatetime = (__u64 *)value; *pcreatetime = CIFS_I(inode)->createtime; return sizeof(__u64); - - return rc; } From 517a6e43c4872c89794af5b377fa085e47345952 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Sun, 11 Jun 2017 09:12:47 +0200 Subject: [PATCH 0948/1065] CIFS: Fix some return values in case of error in 'crypt_message' 'rc' is known to be 0 at this point. So if 'init_sg' or 'kzalloc' fails, we should return -ENOMEM instead. Also remove a useless 'rc' in a debug message as it is meaningless here. Fixes: 026e93dc0a3ee ("CIFS: Encrypt SMB3 requests before sending") Signed-off-by: Christophe JAILLET Reviewed-by: Pavel Shilovsky Reviewed-by: Aurelien Aptel Signed-off-by: Steve French CC: Stable --- fs/cifs/smb2ops.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 59726013375b..7e48561abd29 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -1809,7 +1809,8 @@ crypt_message(struct TCP_Server_Info *server, struct smb_rqst *rqst, int enc) sg = init_sg(rqst, sign); if (!sg) { - cifs_dbg(VFS, "%s: Failed to init sg %d", __func__, rc); + cifs_dbg(VFS, "%s: Failed to init sg", __func__); + rc = -ENOMEM; goto free_req; } @@ -1817,6 +1818,7 @@ crypt_message(struct TCP_Server_Info *server, struct smb_rqst *rqst, int enc) iv = kzalloc(iv_len, GFP_KERNEL); if (!iv) { cifs_dbg(VFS, "%s: Failed to alloc IV", __func__); + rc = -ENOMEM; goto free_sg; } iv[0] = 3; From e94ac3510b6a0f696f2c442c4fc4051c8101ef12 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 20 Jun 2017 22:28:37 +0200 Subject: [PATCH 0949/1065] drm: Fix GETCONNECTOR regression In commit 91eefc05f0ac71902906b2058360e61bd25137fe Author: Daniel Vetter Date: Wed Dec 14 00:08:10 2016 +0100 drm: Tighten locking in drm_mode_getconnector I reordered the logic a bit in that IOCTL, but that broke userspace since it'll get the new mode list, but not the new property values. Fix that again. v2: Fix up the error path handling when copy_to_user for the modes failes (Dhinakaran). Fixes: 91eefc05f0ac ("drm: Tighten locking in drm_mode_getconnector") Cc: Sean Paul Cc: Daniel Vetter Cc: Jani Nikula Cc: David Airlie Cc: dri-devel@lists.freedesktop.org Reported-by: "H.J. Lu" Tested-by: "H.J. Lu" Cc: # v4.11+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100576 Cc: "H.J. Lu" Cc: "Pandiyan, Dhinakaran" Reviewed-by: Sean Paul Reviewed-by: Dhinakaran Pandiyan Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170620202837.1701-1-daniel.vetter@ffwll.ch --- drivers/gpu/drm/drm_connector.c | 38 +++++++++++++++++---------------- 1 file changed, 20 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index 9f847615ac74..48ca2457df8c 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -1229,21 +1229,6 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, if (!connector) return -ENOENT; - drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); - encoder = drm_connector_get_encoder(connector); - if (encoder) - out_resp->encoder_id = encoder->base.id; - else - out_resp->encoder_id = 0; - - ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic, - (uint32_t __user *)(unsigned long)(out_resp->props_ptr), - (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr), - &out_resp->count_props); - drm_modeset_unlock(&dev->mode_config.connection_mutex); - if (ret) - goto out_unref; - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) if (connector->encoder_ids[i] != 0) encoders_count++; @@ -1256,7 +1241,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, if (put_user(connector->encoder_ids[i], encoder_ptr + copied)) { ret = -EFAULT; - goto out_unref; + goto out; } copied++; } @@ -1300,15 +1285,32 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, if (copy_to_user(mode_ptr + copied, &u_mode, sizeof(u_mode))) { ret = -EFAULT; + mutex_unlock(&dev->mode_config.mutex); + goto out; } copied++; } } out_resp->count_modes = mode_count; -out: mutex_unlock(&dev->mode_config.mutex); -out_unref: + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + encoder = drm_connector_get_encoder(connector); + if (encoder) + out_resp->encoder_id = encoder->base.id; + else + out_resp->encoder_id = 0; + + /* Only grab properties after probing, to make sure EDID and other + * properties reflect the latest status. */ + ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic, + (uint32_t __user *)(unsigned long)(out_resp->props_ptr), + (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr), + &out_resp->count_props); + drm_modeset_unlock(&dev->mode_config.connection_mutex); + +out: drm_connector_put(connector); return ret; From 8a1898db51a3390241cd5fae267dc8aaa9db0f8b Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 20 Jun 2017 12:26:39 +0200 Subject: [PATCH 0950/1065] perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev) If the event for which an AUX area is about to be allocated, does not support setting up an AUX area, rb_alloc_aux() return -ENOTSUPP. This error condition is being returned unfiltered to the user space, and, for example, the perf tools fails with: failed to mmap with 524 (INTERNAL ERROR: strerror_r(524, 0x3fff497a1c8, 512)=22) This error can be easily seen with "perf record -m 128,256 -e cpu-clock". The 524 error code maps to -ENOTSUPP (in rb_alloc_aux()). The -ENOTSUPP error code shall be only used within the kernel. So the correct error code would then be -EOPNOTSUPP. With this commit, the perf tool then reports: failed to mmap with 95 (Operation not supported) which is more clear. Signed-off-by: Hendrik Brueckner Acked-by: Alexander Shishkin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Pu Hou Cc: Thomas Gleixner Cc: Thomas-Mich Richter Cc: acme@kernel.org Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/1497954399-6355-1-git-send-email-brueckner@linux.vnet.ibm.com Signed-off-by: Ingo Molnar --- kernel/events/ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c index 2831480c63a2..ee97196bb151 100644 --- a/kernel/events/ring_buffer.c +++ b/kernel/events/ring_buffer.c @@ -580,7 +580,7 @@ int rb_alloc_aux(struct ring_buffer *rb, struct perf_event *event, int ret = -ENOMEM, max_order = 0; if (!has_aux(event)) - return -ENOTSUPP; + return -EOPNOTSUPP; if (event->pmu->capabilities & PERF_PMU_CAP_AUX_NO_SG) { /* From 7def52b78a5fda14864aab9b6fd14f09a4d4ff72 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 19 Jun 2017 10:55:47 -0400 Subject: [PATCH 0951/1065] dm integrity: fix to not disable/enable interrupts from interrupt context Use spin_lock_irqsave and spin_unlock_irqrestore rather than spin_{lock,unlock}_irq in submit_flush_bio(). Otherwise lockdep issues the following warning: DEBUG_LOCKS_WARN_ON(current->hardirq_context) WARNING: CPU: 1 PID: 0 at kernel/locking/lockdep.c:2748 trace_hardirqs_on_caller+0x107/0x180 Reported-by: Ondrej Kozina Tested-by: Ondrej Kozina Signed-off-by: Mike Snitzer Acked-by: Mikulas Patocka --- drivers/md/dm-integrity.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index 4ab10cf718c9..93b181088168 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -1105,10 +1105,13 @@ static void schedule_autocommit(struct dm_integrity_c *ic) static void submit_flush_bio(struct dm_integrity_c *ic, struct dm_integrity_io *dio) { struct bio *bio; - spin_lock_irq(&ic->endio_wait.lock); + unsigned long flags; + + spin_lock_irqsave(&ic->endio_wait.lock, flags); bio = dm_bio_from_per_bio_data(dio, sizeof(struct dm_integrity_io)); bio_list_add(&ic->flush_bio_list, bio); - spin_unlock_irq(&ic->endio_wait.lock); + spin_unlock_irqrestore(&ic->endio_wait.lock, flags); + queue_work(ic->commit_wq, &ic->commit_work); } From feb7695fe9fb83084aa29de0094774f4c9d4c9fc Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 20 Jun 2017 19:14:30 -0400 Subject: [PATCH 0952/1065] dm io: fix duplicate bio completion due to missing ref count If only a subset of the devices associated with multiple regions support a given special operation (eg. DISCARD) then the dec_count() that is used to set error for the region must increment the io->count. Otherwise, when the dec_count() is called it can cause the dm-io caller's bio to be completed multiple times. As was reported against the dm-mirror target that had mirror legs with a mix of discard capabilities. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077 Reported-by: Zhang Yi Signed-off-by: Mike Snitzer --- drivers/md/dm-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 3702e502466d..8d5ca30f6551 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -317,8 +317,8 @@ static void do_region(int op, int op_flags, unsigned region, else if (op == REQ_OP_WRITE_SAME) special_cmd_max_sectors = q->limits.max_write_same_sectors; if ((op == REQ_OP_DISCARD || op == REQ_OP_WRITE_ZEROES || - op == REQ_OP_WRITE_SAME) && - special_cmd_max_sectors == 0) { + op == REQ_OP_WRITE_SAME) && special_cmd_max_sectors == 0) { + atomic_inc(&io->count); dec_count(io, region, -EOPNOTSUPP); return; } From 8e8320c9315c47a6a090188720ccff32a6a6ba18 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 20 Jun 2017 17:56:13 -0600 Subject: [PATCH 0953/1065] blk-mq: fix performance regression with shared tags If we have shared tags enabled, then every IO completion will trigger a full loop of every queue belonging to a tag set, and every hardware queue for each of those queues, even if nothing needs to be done. This causes a massive performance regression if you have a lot of shared devices. Instead of doing this huge full scan on every IO, add an atomic counter to the main queue that tracks how many hardware queues have been marked as needing a restart. With that, we can avoid looking for restartable queues, if we don't have to. Max reports that this restores performance. Before this patch, 4K IOPS was limited to 22-23K IOPS. With the patch, we are running at 950-970K IOPS. Fixes: 6d8c6c0f97ad ("blk-mq: Restart a single queue if tag sets are shared") Reported-by: Max Gurtovoy Tested-by: Max Gurtovoy Reviewed-by: Bart Van Assche Tested-by: Bart Van Assche Signed-off-by: Jens Axboe --- block/blk-mq-sched.c | 58 +++++++++++++++++++++++++++++++++--------- block/blk-mq-sched.h | 9 ------- block/blk-mq.c | 16 +++++++++--- include/linux/blkdev.h | 2 ++ 4 files changed, 61 insertions(+), 24 deletions(-) diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c index 1f5b692526ae..0ded5e846335 100644 --- a/block/blk-mq-sched.c +++ b/block/blk-mq-sched.c @@ -68,6 +68,45 @@ static void blk_mq_sched_assign_ioc(struct request_queue *q, __blk_mq_sched_assign_ioc(q, rq, bio, ioc); } +/* + * Mark a hardware queue as needing a restart. For shared queues, maintain + * a count of how many hardware queues are marked for restart. + */ +static void blk_mq_sched_mark_restart_hctx(struct blk_mq_hw_ctx *hctx) +{ + if (test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state)) + return; + + if (hctx->flags & BLK_MQ_F_TAG_SHARED) { + struct request_queue *q = hctx->queue; + + if (!test_and_set_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state)) + atomic_inc(&q->shared_hctx_restart); + } else + set_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state); +} + +static bool blk_mq_sched_restart_hctx(struct blk_mq_hw_ctx *hctx) +{ + if (!test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state)) + return false; + + if (hctx->flags & BLK_MQ_F_TAG_SHARED) { + struct request_queue *q = hctx->queue; + + if (test_and_clear_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state)) + atomic_dec(&q->shared_hctx_restart); + } else + clear_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state); + + if (blk_mq_hctx_has_pending(hctx)) { + blk_mq_run_hw_queue(hctx, true); + return true; + } + + return false; +} + struct request *blk_mq_sched_get_request(struct request_queue *q, struct bio *bio, unsigned int op, @@ -266,18 +305,6 @@ static bool blk_mq_sched_bypass_insert(struct blk_mq_hw_ctx *hctx, return true; } -static bool blk_mq_sched_restart_hctx(struct blk_mq_hw_ctx *hctx) -{ - if (test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state)) { - clear_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state); - if (blk_mq_hctx_has_pending(hctx)) { - blk_mq_run_hw_queue(hctx, true); - return true; - } - } - return false; -} - /** * list_for_each_entry_rcu_rr - iterate in a round-robin fashion over rcu list * @pos: loop cursor. @@ -309,6 +336,13 @@ void blk_mq_sched_restart(struct blk_mq_hw_ctx *const hctx) unsigned int i, j; if (set->flags & BLK_MQ_F_TAG_SHARED) { + /* + * If this is 0, then we know that no hardware queues + * have RESTART marked. We're done. + */ + if (!atomic_read(&queue->shared_hctx_restart)) + return; + rcu_read_lock(); list_for_each_entry_rcu_rr(q, queue, &set->tag_list, tag_set_list) { diff --git a/block/blk-mq-sched.h b/block/blk-mq-sched.h index edafb5383b7b..5007edece51a 100644 --- a/block/blk-mq-sched.h +++ b/block/blk-mq-sched.h @@ -115,15 +115,6 @@ static inline bool blk_mq_sched_has_work(struct blk_mq_hw_ctx *hctx) return false; } -/* - * Mark a hardware queue as needing a restart. - */ -static inline void blk_mq_sched_mark_restart_hctx(struct blk_mq_hw_ctx *hctx) -{ - if (!test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state)) - set_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state); -} - static inline bool blk_mq_sched_needs_restart(struct blk_mq_hw_ctx *hctx) { return test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state); diff --git a/block/blk-mq.c b/block/blk-mq.c index bb66c96850b1..958cedaff8b8 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -2103,20 +2103,30 @@ static void blk_mq_map_swqueue(struct request_queue *q, } } +/* + * Caller needs to ensure that we're either frozen/quiesced, or that + * the queue isn't live yet. + */ static void queue_set_hctx_shared(struct request_queue *q, bool shared) { struct blk_mq_hw_ctx *hctx; int i; queue_for_each_hw_ctx(q, hctx, i) { - if (shared) + if (shared) { + if (test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state)) + atomic_inc(&q->shared_hctx_restart); hctx->flags |= BLK_MQ_F_TAG_SHARED; - else + } else { + if (test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state)) + atomic_dec(&q->shared_hctx_restart); hctx->flags &= ~BLK_MQ_F_TAG_SHARED; + } } } -static void blk_mq_update_tag_set_depth(struct blk_mq_tag_set *set, bool shared) +static void blk_mq_update_tag_set_depth(struct blk_mq_tag_set *set, + bool shared) { struct request_queue *q; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index b74a3edcb3da..1ddd36bd2173 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -391,6 +391,8 @@ struct request_queue { int nr_rqs[2]; /* # allocated [a]sync rqs */ int nr_rqs_elvpriv; /* # allocated rqs w/ elvpriv */ + atomic_t shared_hctx_restart; + struct blk_queue_stats *stats; struct rq_wb *rq_wb; From f4cb767d76cf7ee72f97dd76f6cfa6c76a5edc89 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 20 Jun 2017 02:10:44 -0700 Subject: [PATCH 0954/1065] mm: fix new crash in unmapped_area_topdown() Trinity gets kernel BUG at mm/mmap.c:1963! in about 3 minutes of mmap testing. That's the VM_BUG_ON(gap_end < gap_start) at the end of unmapped_area_topdown(). Linus points out how MAP_FIXED (which does not have to respect our stack guard gap intentions) could result in gap_end below gap_start there. Fix that, and the similar case in its alternative, unmapped_area(). Cc: stable@vger.kernel.org Fixes: 1be7107fbe18 ("mm: larger stack guard gap, between vmas") Reported-by: Dave Jones Debugged-by: Linus Torvalds Signed-off-by: Hugh Dickins Acked-by: Michal Hocko Signed-off-by: Linus Torvalds --- mm/mmap.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/mmap.c b/mm/mmap.c index 8e07976d5e47..290b77d9a01e 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1817,7 +1817,8 @@ check_current: /* Check if current node has a suitable gap */ if (gap_start > high_limit) return -ENOMEM; - if (gap_end >= low_limit && gap_end - gap_start >= length) + if (gap_end >= low_limit && + gap_end > gap_start && gap_end - gap_start >= length) goto found; /* Visit right subtree if it looks promising */ @@ -1920,7 +1921,8 @@ check_current: gap_end = vm_start_gap(vma); if (gap_end < low_limit) return -ENOMEM; - if (gap_start <= high_limit && gap_end - gap_start >= length) + if (gap_start <= high_limit && + gap_end > gap_start && gap_end - gap_start >= length) goto found; /* Visit left subtree if it looks promising */ From bd726c90b6b8ce87602208701b208a208e6d5600 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 19 Jun 2017 17:34:05 +0200 Subject: [PATCH 0955/1065] Allow stack to grow up to address space limit Fix expand_upwards() on architectures with an upward-growing stack (parisc, metag and partly IA-64) to allow the stack to reliably grow exactly up to the address space limit given by TASK_SIZE. Signed-off-by: Helge Deller Acked-by: Hugh Dickins Signed-off-by: Linus Torvalds --- mm/mmap.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/mm/mmap.c b/mm/mmap.c index 290b77d9a01e..a5e3dcd75e79 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2230,16 +2230,19 @@ int expand_upwards(struct vm_area_struct *vma, unsigned long address) if (!(vma->vm_flags & VM_GROWSUP)) return -EFAULT; - /* Guard against wrapping around to address 0. */ + /* Guard against exceeding limits of the address space. */ address &= PAGE_MASK; - address += PAGE_SIZE; - if (!address) + if (address >= TASK_SIZE) return -ENOMEM; + address += PAGE_SIZE; /* Enforce stack_guard_gap */ gap_addr = address + stack_guard_gap; - if (gap_addr < address) - return -ENOMEM; + + /* Guard against overflow */ + if (gap_addr < address || gap_addr > TASK_SIZE) + gap_addr = TASK_SIZE; + next = vma->vm_next; if (next && next->vm_start < gap_addr) { if (!(next->vm_flags & VM_GROWSUP)) From e4330d8bf669139a983255d1801733b64c2ae841 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 19 Jun 2017 15:53:01 +0300 Subject: [PATCH 0956/1065] ACPI / scan: Fix enumeration for special SPI and I2C devices Commit f406270bf73d ("ACPI / scan: Set the visited flag for all enumerated devices") caused that two group of special SPI or I2C devices do not enumerate. SPI and I2C devices are expected to be enumerated by the SPI and I2C subsystems but change caused that acpi_bus_attach() marks those devices with acpi_device_set_enumerated(). First group of devices are matched using Device Tree compatible property with special _HID "PRP0001". Those devices have matched scan handler, acpi_scan_attach_handler() retuns 1 and acpi_bus_attach() marks them with acpi_device_set_enumerated(). Second group of devices without valid _HID such as "LNXVIDEO" have device->pnp.type.platform_id set to zero and change again marks them with acpi_device_set_enumerated(). Fix this by flagging the SPI and I2C devices during struct acpi_device object initialization time and let the code in acpi_bus_attach() to go through the device_attach() and acpi_default_enumeration() path for all SPI and I2C devices. Fixes: f406270bf73d (ACPI / scan: Set the visited flag for all enumerated devices) Signed-off-by: Jarkko Nikula Acked-by: Mika Westerberg Cc: 4.11+ # 4.11+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/scan.c | 67 +++++++++++++++++++++++------------------ include/acpi/acpi_bus.h | 3 +- 2 files changed, 39 insertions(+), 31 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 3a10d7573477..d53162997f32 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1428,6 +1428,37 @@ static void acpi_init_coherency(struct acpi_device *adev) adev->flags.coherent_dma = cca; } +static int acpi_check_spi_i2c_slave(struct acpi_resource *ares, void *data) +{ + bool *is_spi_i2c_slave_p = data; + + if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) + return 1; + + /* + * devices that are connected to UART still need to be enumerated to + * platform bus + */ + if (ares->data.common_serial_bus.type != ACPI_RESOURCE_SERIAL_TYPE_UART) + *is_spi_i2c_slave_p = true; + + /* no need to do more checking */ + return -1; +} + +static bool acpi_is_spi_i2c_slave(struct acpi_device *device) +{ + struct list_head resource_list; + bool is_spi_i2c_slave = false; + + INIT_LIST_HEAD(&resource_list); + acpi_dev_get_resources(device, &resource_list, acpi_check_spi_i2c_slave, + &is_spi_i2c_slave); + acpi_dev_free_resource_list(&resource_list); + + return is_spi_i2c_slave; +} + void acpi_init_device_object(struct acpi_device *device, acpi_handle handle, int type, unsigned long long sta) { @@ -1443,6 +1474,7 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle, acpi_bus_get_flags(device); device->flags.match_driver = false; device->flags.initialized = true; + device->flags.spi_i2c_slave = acpi_is_spi_i2c_slave(device); acpi_device_clear_enumerated(device); device_initialize(&device->dev); dev_set_uevent_suppress(&device->dev, true); @@ -1727,38 +1759,13 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used, return AE_OK; } -static int acpi_check_spi_i2c_slave(struct acpi_resource *ares, void *data) -{ - bool *is_spi_i2c_slave_p = data; - - if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) - return 1; - - /* - * devices that are connected to UART still need to be enumerated to - * platform bus - */ - if (ares->data.common_serial_bus.type != ACPI_RESOURCE_SERIAL_TYPE_UART) - *is_spi_i2c_slave_p = true; - - /* no need to do more checking */ - return -1; -} - static void acpi_default_enumeration(struct acpi_device *device) { - struct list_head resource_list; - bool is_spi_i2c_slave = false; - /* * Do not enumerate SPI/I2C slaves as they will be enumerated by their * respective parents. */ - INIT_LIST_HEAD(&resource_list); - acpi_dev_get_resources(device, &resource_list, acpi_check_spi_i2c_slave, - &is_spi_i2c_slave); - acpi_dev_free_resource_list(&resource_list); - if (!is_spi_i2c_slave) { + if (!device->flags.spi_i2c_slave) { acpi_create_platform_device(device, NULL); acpi_device_set_enumerated(device); } else { @@ -1854,7 +1861,7 @@ static void acpi_bus_attach(struct acpi_device *device) return; device->flags.match_driver = true; - if (ret > 0) { + if (ret > 0 && !device->flags.spi_i2c_slave) { acpi_device_set_enumerated(device); goto ok; } @@ -1863,10 +1870,10 @@ static void acpi_bus_attach(struct acpi_device *device) if (ret < 0) return; - if (device->pnp.type.platform_id) - acpi_default_enumeration(device); - else + if (!device->pnp.type.platform_id && !device->flags.spi_i2c_slave) acpi_device_set_enumerated(device); + else + acpi_default_enumeration(device); ok: list_for_each_entry(child, &device->children, node) diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 197f3fffc9a7..408c7820e200 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -210,7 +210,8 @@ struct acpi_device_flags { u32 of_compatible_ok:1; u32 coherent_dma:1; u32 cca_seen:1; - u32 reserved:20; + u32 spi_i2c_slave:1; + u32 reserved:19; }; /* File System */ From 2f263d145140ea4b9f5762b15886ae26195a764a Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Thu, 15 Jun 2017 10:36:22 +0200 Subject: [PATCH 0957/1065] kbuild: fix header installation under fakechroot environment Since commit fcc8487d477a ("uapi: export all headers under uapi directories") fakechroot make bindeb-pkg fails, mismatching files for directories: touch: cannot touch 'usr/include/video/uvesafb.h/.install': Not a directory This due to a bug in fakechroot: when using the function $(wildcard $(srcdir)/*/.) in a makefile, under a fakechroot environment, not only directories but also files are returned. To circumvent that, we are using the functions: $(sort $(dir $(wildcard $(srcdir)/*/)))) Fixes: fcc8487d477a ("uapi: export all headers under uapi directories") Signed-off-by: Richard Genoud Signed-off-by: Masahiro Yamada --- scripts/Makefile.headersinst | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index ce753a408c56..c583a1e1bd3c 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -14,7 +14,15 @@ __headers: include scripts/Kbuild.include srcdir := $(srctree)/$(obj) -subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.)) + +# When make is run under a fakechroot environment, the function +# $(wildcard $(srcdir)/*/.) doesn't only return directories, but also regular +# files. So, we are using a combination of sort/dir/wildcard which works +# with fakechroot. +subdirs := $(patsubst $(srcdir)/%/,%,\ + $(filter-out $(srcdir)/,\ + $(sort $(dir $(wildcard $(srcdir)/*/))))) + # caller may set destination dir (when installing to asm/) _dst := $(if $(dst),$(dst),$(obj)) From eb5e248d502bec191bd99f04cae8b49992b3abde Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 21 Jun 2017 20:27:35 -0700 Subject: [PATCH 0958/1065] xfs: don't allow bmap on rt files bmap returns a dumb LBA address but not the block device that goes with that LBA. Swapfiles don't care about this and will blindly assume that the data volume is the correct blockdev, which is totally bogus for files on the rt subvolume. This results in the swap code doing IOs to arbitrary locations on the data device(!) if the passed in mapping is a realtime file, so just turn off bmap for rt files. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_aops.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 09af0f7cd55e..3b91faacc1ba 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -1316,9 +1316,12 @@ xfs_vm_bmap( * The swap code (ab-)uses ->bmap to get a block mapping and then * bypasseѕ the file system for actual I/O. We really can't allow * that on reflinks inodes, so we have to skip out here. And yes, - * 0 is the magic code for a bmap error.. + * 0 is the magic code for a bmap error. + * + * Since we don't pass back blockdev info, we can't return bmap + * information for rt files either. */ - if (xfs_is_reflink_inode(ip)) + if (xfs_is_reflink_inode(ip) || XFS_IS_REALTIME_INODE(ip)) return 0; filemap_write_and_wait(mapping); From 7c88e21aefcf86fb41b48b2e04528db5a30fbe18 Mon Sep 17 00:00:00 2001 From: Yossi Kuperman Date: Thu, 22 Jun 2017 11:37:10 +0300 Subject: [PATCH 0959/1065] xfrm6: Fix IPv6 payload_len in xfrm6_transport_finish IPv6 payload length indicates the size of the payload, including any extension headers. In xfrm6_transport_finish, ipv6_hdr(skb)->payload_len is set to the payload size only, regardless of the presence of any extension headers. After ESP GRO transport mode decapsulation, ipv6_rcv trims the packet according to the wrong payload_len, thus corrupting the packet. Set payload_len to account for extension headers as well. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Yossi Kuperman Signed-off-by: Steffen Klassert --- net/ipv6/xfrm6_input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c index 08a807b29298..3ef5d913e7a3 100644 --- a/net/ipv6/xfrm6_input.c +++ b/net/ipv6/xfrm6_input.c @@ -43,8 +43,8 @@ int xfrm6_transport_finish(struct sk_buff *skb, int async) return 1; #endif - ipv6_hdr(skb)->payload_len = htons(skb->len); __skb_push(skb, skb->data - skb_network_header(skb)); + ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr)); if (xo && (xo->flags & XFRM_GRO)) { skb_mac_header_rebuild(skb); From ca3a1b856636f596c691ab5b3764045a142186db Mon Sep 17 00:00:00 2001 From: Yossi Kuperman Date: Thu, 22 Jun 2017 11:37:11 +0300 Subject: [PATCH 0960/1065] esp6_offload: Fix IP6CB(skb)->nhoff for ESP GRO IP6CB(skb)->nhoff is the offset of the nexthdr field in an IPv6 header, unless there are extension headers present, in which case nhoff points to the nexthdr field of the last extension header. In non-GRO code path, nhoff is set by ipv6_rcv before any XFRM code is executed. Conversely, in GRO code path (when esp6_offload is loaded), nhoff is not set. The following functions fail to read the correct value and eventually the packet is dropped: xfrm6_transport_finish xfrm6_tunnel_input xfrm6_rcv_tnl Set nhoff to the proper offset of nexthdr in esp6_gro_receive. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Yossi Kuperman Signed-off-by: Steffen Klassert --- net/ipv6/esp6_offload.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/net/ipv6/esp6_offload.c b/net/ipv6/esp6_offload.c index d950d43ba255..f02f131f6435 100644 --- a/net/ipv6/esp6_offload.c +++ b/net/ipv6/esp6_offload.c @@ -30,6 +30,25 @@ #include #include +static __u16 esp6_nexthdr_esp_offset(struct ipv6hdr *ipv6_hdr, int nhlen) +{ + int off = sizeof(struct ipv6hdr); + struct ipv6_opt_hdr *exthdr; + + if (likely(ipv6_hdr->nexthdr == NEXTHDR_ESP)) + return offsetof(struct ipv6hdr, nexthdr); + + while (off < nhlen) { + exthdr = (void *)ipv6_hdr + off; + if (exthdr->nexthdr == NEXTHDR_ESP) + return off; + + off += ipv6_optlen(exthdr); + } + + return 0; +} + static struct sk_buff **esp6_gro_receive(struct sk_buff **head, struct sk_buff *skb) { @@ -38,6 +57,7 @@ static struct sk_buff **esp6_gro_receive(struct sk_buff **head, struct xfrm_state *x; __be32 seq; __be32 spi; + int nhoff; int err; skb_pull(skb, offset); @@ -72,6 +92,11 @@ static struct sk_buff **esp6_gro_receive(struct sk_buff **head, xo->flags |= XFRM_GRO; + nhoff = esp6_nexthdr_esp_offset(ipv6_hdr(skb), offset); + if (!nhoff) + goto out; + + IP6CB(skb)->nhoff = nhoff; XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 = NULL; XFRM_SPI_SKB_CB(skb)->family = AF_INET6; XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct ipv6hdr, daddr); From 6c782a5ea56a799658e213a78dc1455264938afa Mon Sep 17 00:00:00 2001 From: Michail Georgios Etairidis Date: Tue, 20 Jun 2017 10:20:42 +0200 Subject: [PATCH 0961/1065] i2c: imx: Use correct function to write to register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The i2c-imx driver incorrectly uses readb()/writeb() to read and write to the appropriate registers when performing a repeated start. The appropriate imx_i2c_read_reg()/imx_i2c_write_reg() functions should be used instead. Performing a repeated start results in a kernel panic. The platform is imx. Signed-off-by: Michail G Etairidis Fixes: ce1a78840ff7 ("i2c: imx: add DMA support for freescale i2c driver") Fixes: 054b62d9f25c ("i2c: imx: fix the i2c bus hang issue when do repeat restart") Acked-by: Fugang Duan Acked-by: Uwe Kleine-König Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 95ed17183e73..54a47b40546f 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -734,9 +734,9 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx, * the first read operation, otherwise the first read cost * one extra clock cycle. */ - temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp |= I2CR_MTX; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); } msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); @@ -857,9 +857,9 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo * the first read operation, otherwise the first read cost * one extra clock cycle. */ - temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp |= I2CR_MTX; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); } } else if (i == (msgs->len - 2)) { dev_dbg(&i2c_imx->adapter.dev, From fb3a5055cd7098f8d1dd0cd38d7172211113255f Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Mon, 19 Jun 2017 07:26:09 -0700 Subject: [PATCH 0962/1065] perf/x86/intel: Add 1G DTLB load/store miss support for SKL Current DTLB load/store miss events (0x608/0x649) only counts 4K,2M and 4M page size. Need to extend the events to support any page size (4K/2M/4M/1G). The complete DTLB load/store miss events are: DTLB_LOAD_MISSES.WALK_COMPLETED 0xe08 DTLB_STORE_MISSES.WALK_COMPLETED 0xe49 Signed-off-by: Kan Liang Cc: Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: eranian@google.com Link: http://lkml.kernel.org/r/20170619142609.11058-1-kan.liang@intel.com Signed-off-by: Ingo Molnar --- arch/x86/events/intel/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index a6d91d4e37a1..110ce8238466 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -431,11 +431,11 @@ static __initconst const u64 skl_hw_cache_event_ids [ C(DTLB) ] = { [ C(OP_READ) ] = { [ C(RESULT_ACCESS) ] = 0x81d0, /* MEM_INST_RETIRED.ALL_LOADS */ - [ C(RESULT_MISS) ] = 0x608, /* DTLB_LOAD_MISSES.WALK_COMPLETED */ + [ C(RESULT_MISS) ] = 0xe08, /* DTLB_LOAD_MISSES.WALK_COMPLETED */ }, [ C(OP_WRITE) ] = { [ C(RESULT_ACCESS) ] = 0x82d0, /* MEM_INST_RETIRED.ALL_STORES */ - [ C(RESULT_MISS) ] = 0x649, /* DTLB_STORE_MISSES.WALK_COMPLETED */ + [ C(RESULT_MISS) ] = 0xe49, /* DTLB_STORE_MISSES.WALK_COMPLETED */ }, [ C(OP_PREFETCH) ] = { [ C(RESULT_ACCESS) ] = 0x0, From addb63c18a0d52a9ce2611d039f981f7b6148d2b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 19 Jun 2017 08:02:28 +0200 Subject: [PATCH 0963/1065] KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows For real-space designation asces the asce origin part is only a token. The asce token origin must not be used to generate an effective address for storage references. This however is erroneously done within kvm_s390_shadow_tables(). Furthermore within the same function the wrong parts of virtual addresses are used to generate a corresponding real address (e.g. the region second index is used as region first index). Both of the above can result in incorrect address translations. Only for real space designations with a token origin of zero and addresses below one megabyte the translation was correct. Furthermore replace a "!asce.r" statement with a "!*fake" statement to make it more obvious that a specific condition has nothing to do with the architecture, but with the fake handling of real space designations. Fixes: 3218f7094b6b ("s390/mm: support real-space for gmap shadows") Cc: David Hildenbrand Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Reviewed-by: Martin Schwidefsky Signed-off-by: Christian Borntraeger --- arch/s390/kvm/gaccess.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c index 9da243d94cc3..3b297fa3aa67 100644 --- a/arch/s390/kvm/gaccess.c +++ b/arch/s390/kvm/gaccess.c @@ -977,11 +977,12 @@ static int kvm_s390_shadow_tables(struct gmap *sg, unsigned long saddr, ptr = asce.origin * 4096; if (asce.r) { *fake = 1; + ptr = 0; asce.dt = ASCE_TYPE_REGION1; } switch (asce.dt) { case ASCE_TYPE_REGION1: - if (vaddr.rfx01 > asce.tl && !asce.r) + if (vaddr.rfx01 > asce.tl && !*fake) return PGM_REGION_FIRST_TRANS; break; case ASCE_TYPE_REGION2: @@ -1009,8 +1010,7 @@ static int kvm_s390_shadow_tables(struct gmap *sg, unsigned long saddr, union region1_table_entry rfte; if (*fake) { - /* offset in 16EB guest memory block */ - ptr = ptr + ((unsigned long) vaddr.rsx << 53UL); + ptr += (unsigned long) vaddr.rfx << 53; rfte.val = ptr; goto shadow_r2t; } @@ -1036,8 +1036,7 @@ shadow_r2t: union region2_table_entry rste; if (*fake) { - /* offset in 8PB guest memory block */ - ptr = ptr + ((unsigned long) vaddr.rtx << 42UL); + ptr += (unsigned long) vaddr.rsx << 42; rste.val = ptr; goto shadow_r3t; } @@ -1064,8 +1063,7 @@ shadow_r3t: union region3_table_entry rtte; if (*fake) { - /* offset in 4TB guest memory block */ - ptr = ptr + ((unsigned long) vaddr.sx << 31UL); + ptr += (unsigned long) vaddr.rtx << 31; rtte.val = ptr; goto shadow_sgt; } @@ -1101,8 +1099,7 @@ shadow_sgt: union segment_table_entry ste; if (*fake) { - /* offset in 2G guest memory block */ - ptr = ptr + ((unsigned long) vaddr.sx << 20UL); + ptr += (unsigned long) vaddr.sx << 20; ste.val = ptr; goto shadow_pgt; } From bbd5ff50afffcf4a01d05367524736c57607a478 Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Tue, 20 Jun 2017 18:37:28 +1000 Subject: [PATCH 0964/1065] powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD NPU2 requires an extra explicit flush to an active GPU PID when sending address translation shoot downs (ATSDs) to reliably flush the GPU TLB. This patch adds just such a flush at the end of each sequence of ATSDs. We can safely use PID 0 which is always reserved and active on the GPU. PID 0 is only used for init_mm which will never be a user mm on the GPU. To enforce this we add a check in pnv_npu2_init_context() just in case someone tries to use PID 0 on the GPU. Signed-off-by: Alistair Popple [mpe: Use true/false for bool literals] Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/npu-dma.c | 94 ++++++++++++++++-------- 1 file changed, 65 insertions(+), 29 deletions(-) diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c index e6f444b46207..b5d960d6db3d 100644 --- a/arch/powerpc/platforms/powernv/npu-dma.c +++ b/arch/powerpc/platforms/powernv/npu-dma.c @@ -449,7 +449,7 @@ static int mmio_launch_invalidate(struct npu *npu, unsigned long launch, return mmio_atsd_reg; } -static int mmio_invalidate_pid(struct npu *npu, unsigned long pid) +static int mmio_invalidate_pid(struct npu *npu, unsigned long pid, bool flush) { unsigned long launch; @@ -465,12 +465,15 @@ static int mmio_invalidate_pid(struct npu *npu, unsigned long pid) /* PID */ launch |= pid << PPC_BITLSHIFT(38); + /* No flush */ + launch |= !flush << PPC_BITLSHIFT(39); + /* Invalidating the entire process doesn't use a va */ return mmio_launch_invalidate(npu, launch, 0); } static int mmio_invalidate_va(struct npu *npu, unsigned long va, - unsigned long pid) + unsigned long pid, bool flush) { unsigned long launch; @@ -486,26 +489,60 @@ static int mmio_invalidate_va(struct npu *npu, unsigned long va, /* PID */ launch |= pid << PPC_BITLSHIFT(38); + /* No flush */ + launch |= !flush << PPC_BITLSHIFT(39); + return mmio_launch_invalidate(npu, launch, va); } #define mn_to_npu_context(x) container_of(x, struct npu_context, mn) +struct mmio_atsd_reg { + struct npu *npu; + int reg; +}; + +static void mmio_invalidate_wait( + struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS], bool flush) +{ + struct npu *npu; + int i, reg; + + /* Wait for all invalidations to complete */ + for (i = 0; i <= max_npu2_index; i++) { + if (mmio_atsd_reg[i].reg < 0) + continue; + + /* Wait for completion */ + npu = mmio_atsd_reg[i].npu; + reg = mmio_atsd_reg[i].reg; + while (__raw_readq(npu->mmio_atsd_regs[reg] + XTS_ATSD_STAT)) + cpu_relax(); + + put_mmio_atsd_reg(npu, reg); + + /* + * The GPU requires two flush ATSDs to ensure all entries have + * been flushed. We use PID 0 as it will never be used for a + * process on the GPU. + */ + if (flush) + mmio_invalidate_pid(npu, 0, true); + } +} + /* * Invalidate either a single address or an entire PID depending on * the value of va. */ static void mmio_invalidate(struct npu_context *npu_context, int va, - unsigned long address) + unsigned long address, bool flush) { - int i, j, reg; + int i, j; struct npu *npu; struct pnv_phb *nphb; struct pci_dev *npdev; - struct { - struct npu *npu; - int reg; - } mmio_atsd_reg[NV_MAX_NPUS]; + struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS]; unsigned long pid = npu_context->mm->context.id; /* @@ -525,10 +562,11 @@ static void mmio_invalidate(struct npu_context *npu_context, int va, if (va) mmio_atsd_reg[i].reg = - mmio_invalidate_va(npu, address, pid); + mmio_invalidate_va(npu, address, pid, + flush); else mmio_atsd_reg[i].reg = - mmio_invalidate_pid(npu, pid); + mmio_invalidate_pid(npu, pid, flush); /* * The NPU hardware forwards the shootdown to all GPUs @@ -544,18 +582,10 @@ static void mmio_invalidate(struct npu_context *npu_context, int va, */ flush_tlb_mm(npu_context->mm); - /* Wait for all invalidations to complete */ - for (i = 0; i <= max_npu2_index; i++) { - if (mmio_atsd_reg[i].reg < 0) - continue; - - /* Wait for completion */ - npu = mmio_atsd_reg[i].npu; - reg = mmio_atsd_reg[i].reg; - while (__raw_readq(npu->mmio_atsd_regs[reg] + XTS_ATSD_STAT)) - cpu_relax(); - put_mmio_atsd_reg(npu, reg); - } + mmio_invalidate_wait(mmio_atsd_reg, flush); + if (flush) + /* Wait for the flush to complete */ + mmio_invalidate_wait(mmio_atsd_reg, false); } static void pnv_npu2_mn_release(struct mmu_notifier *mn, @@ -571,7 +601,7 @@ static void pnv_npu2_mn_release(struct mmu_notifier *mn, * There should be no more translation requests for this PID, but we * need to ensure any entries for it are removed from the TLB. */ - mmio_invalidate(npu_context, 0, 0); + mmio_invalidate(npu_context, 0, 0, true); } static void pnv_npu2_mn_change_pte(struct mmu_notifier *mn, @@ -581,7 +611,7 @@ static void pnv_npu2_mn_change_pte(struct mmu_notifier *mn, { struct npu_context *npu_context = mn_to_npu_context(mn); - mmio_invalidate(npu_context, 1, address); + mmio_invalidate(npu_context, 1, address, true); } static void pnv_npu2_mn_invalidate_page(struct mmu_notifier *mn, @@ -590,7 +620,7 @@ static void pnv_npu2_mn_invalidate_page(struct mmu_notifier *mn, { struct npu_context *npu_context = mn_to_npu_context(mn); - mmio_invalidate(npu_context, 1, address); + mmio_invalidate(npu_context, 1, address, true); } static void pnv_npu2_mn_invalidate_range(struct mmu_notifier *mn, @@ -600,8 +630,11 @@ static void pnv_npu2_mn_invalidate_range(struct mmu_notifier *mn, struct npu_context *npu_context = mn_to_npu_context(mn); unsigned long address; - for (address = start; address <= end; address += PAGE_SIZE) - mmio_invalidate(npu_context, 1, address); + for (address = start; address < end; address += PAGE_SIZE) + mmio_invalidate(npu_context, 1, address, false); + + /* Do the flush only on the final addess == end */ + mmio_invalidate(npu_context, 1, address, true); } static const struct mmu_notifier_ops nv_nmmu_notifier_ops = { @@ -651,8 +684,11 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev, /* No nvlink associated with this GPU device */ return ERR_PTR(-ENODEV); - if (!mm) { - /* kernel thread contexts are not supported */ + if (!mm || mm->context.id == 0) { + /* + * Kernel thread contexts are not supported and context id 0 is + * reserved on the GPU. + */ return ERR_PTR(-EINVAL); } From c8401dda2f0a00cd25c0af6a95ed50e478d25de4 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 7 Jun 2017 15:13:14 +0200 Subject: [PATCH 0965/1065] KVM: x86: fix singlestepping over syscall MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit TF is handled a bit differently for syscall and sysret, compared to the other instructions: TF is checked after the instruction completes, so that the OS can disable #DB at a syscall by adding TF to FMASK. When the sysret is executed the #DB is taken "as if" the syscall insn just completed. KVM emulates syscall so that it can trap 32-bit syscall on Intel processors. Fix the behavior, otherwise you could get #DB on a user stack which is not nice. This does not affect Linux guests, as they use an IST or task gate for #DB. This fixes CVE-2017-7518. Cc: stable@vger.kernel.org Reported-by: Andy Lutomirski Signed-off-by: Paolo Bonzini Signed-off-by: Radim Krčmář --- arch/x86/include/asm/kvm_emulate.h | 1 + arch/x86/kvm/emulate.c | 1 + arch/x86/kvm/x86.c | 62 +++++++++++++++--------------- 3 files changed, 34 insertions(+), 30 deletions(-) diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h index 055962615779..722d0e568863 100644 --- a/arch/x86/include/asm/kvm_emulate.h +++ b/arch/x86/include/asm/kvm_emulate.h @@ -296,6 +296,7 @@ struct x86_emulate_ctxt { bool perm_ok; /* do not check permissions if true */ bool ud; /* inject an #UD if host doesn't support insn */ + bool tf; /* TF value before instruction (after for syscall/sysret) */ bool have_exception; struct x86_exception exception; diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 0816ab2e8adc..80890dee66ce 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -2742,6 +2742,7 @@ static int em_syscall(struct x86_emulate_ctxt *ctxt) ctxt->eflags &= ~(X86_EFLAGS_VM | X86_EFLAGS_IF); } + ctxt->tf = (ctxt->eflags & X86_EFLAGS_TF) != 0; return X86EMUL_CONTINUE; } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 87d3cb901935..0e846f0cb83b 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5313,6 +5313,8 @@ static void init_emulate_ctxt(struct kvm_vcpu *vcpu) kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l); ctxt->eflags = kvm_get_rflags(vcpu); + ctxt->tf = (ctxt->eflags & X86_EFLAGS_TF) != 0; + ctxt->eip = kvm_rip_read(vcpu); ctxt->mode = (!is_protmode(vcpu)) ? X86EMUL_MODE_REAL : (ctxt->eflags & X86_EFLAGS_VM) ? X86EMUL_MODE_VM86 : @@ -5528,36 +5530,25 @@ static int kvm_vcpu_check_hw_bp(unsigned long addr, u32 type, u32 dr7, return dr6; } -static void kvm_vcpu_check_singlestep(struct kvm_vcpu *vcpu, unsigned long rflags, int *r) +static void kvm_vcpu_do_singlestep(struct kvm_vcpu *vcpu, int *r) { struct kvm_run *kvm_run = vcpu->run; - /* - * rflags is the old, "raw" value of the flags. The new value has - * not been saved yet. - * - * This is correct even for TF set by the guest, because "the - * processor will not generate this exception after the instruction - * that sets the TF flag". - */ - if (unlikely(rflags & X86_EFLAGS_TF)) { - if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) { - kvm_run->debug.arch.dr6 = DR6_BS | DR6_FIXED_1 | - DR6_RTM; - kvm_run->debug.arch.pc = vcpu->arch.singlestep_rip; - kvm_run->debug.arch.exception = DB_VECTOR; - kvm_run->exit_reason = KVM_EXIT_DEBUG; - *r = EMULATE_USER_EXIT; - } else { - /* - * "Certain debug exceptions may clear bit 0-3. The - * remaining contents of the DR6 register are never - * cleared by the processor". - */ - vcpu->arch.dr6 &= ~15; - vcpu->arch.dr6 |= DR6_BS | DR6_RTM; - kvm_queue_exception(vcpu, DB_VECTOR); - } + if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) { + kvm_run->debug.arch.dr6 = DR6_BS | DR6_FIXED_1 | DR6_RTM; + kvm_run->debug.arch.pc = vcpu->arch.singlestep_rip; + kvm_run->debug.arch.exception = DB_VECTOR; + kvm_run->exit_reason = KVM_EXIT_DEBUG; + *r = EMULATE_USER_EXIT; + } else { + /* + * "Certain debug exceptions may clear bit 0-3. The + * remaining contents of the DR6 register are never + * cleared by the processor". + */ + vcpu->arch.dr6 &= ~15; + vcpu->arch.dr6 |= DR6_BS | DR6_RTM; + kvm_queue_exception(vcpu, DB_VECTOR); } } @@ -5567,7 +5558,17 @@ int kvm_skip_emulated_instruction(struct kvm_vcpu *vcpu) int r = EMULATE_DONE; kvm_x86_ops->skip_emulated_instruction(vcpu); - kvm_vcpu_check_singlestep(vcpu, rflags, &r); + + /* + * rflags is the old, "raw" value of the flags. The new value has + * not been saved yet. + * + * This is correct even for TF set by the guest, because "the + * processor will not generate this exception after the instruction + * that sets the TF flag". + */ + if (unlikely(rflags & X86_EFLAGS_TF)) + kvm_vcpu_do_singlestep(vcpu, &r); return r == EMULATE_DONE; } EXPORT_SYMBOL_GPL(kvm_skip_emulated_instruction); @@ -5726,8 +5727,9 @@ restart: toggle_interruptibility(vcpu, ctxt->interruptibility); vcpu->arch.emulate_regs_need_sync_to_vcpu = false; kvm_rip_write(vcpu, ctxt->eip); - if (r == EMULATE_DONE) - kvm_vcpu_check_singlestep(vcpu, rflags, &r); + if (r == EMULATE_DONE && + (ctxt->tf || (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP))) + kvm_vcpu_do_singlestep(vcpu, &r); if (!ctxt->have_exception || exception_type(ctxt->exception.vector) == EXCPT_TRAP) __kvm_set_rflags(vcpu, ctxt->eflags); From b866203d872d5deeafcecd25ea429d6748b5bd56 Mon Sep 17 00:00:00 2001 From: Zach Brown Date: Tue, 20 Jun 2017 12:48:11 -0500 Subject: [PATCH 0966/1065] net/phy: micrel: configure intterupts after autoneg workaround The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an autoneg failure case by resetting the hardware. This turns off intterupts. Things will work themselves out if the phy polls, as it will figure out it's state during a poll. However if the phy uses only intterupts, the phy will stall, since interrupts are off. This patch fixes the issue by calling config_intr after resetting the phy. Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg ") Signed-off-by: Zach Brown Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index b9252b8d81ff..8b2038844ba9 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -619,6 +619,8 @@ static int ksz9031_read_status(struct phy_device *phydev) if ((regval & 0xFF) == 0xFF) { phy_init_hw(phydev); phydev->link = 0; + if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev)) + phydev->drv->config_intr(phydev); } return 0; From 76da0704507bbc51875013f6557877ab308cfd0a Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 20 Jun 2017 11:42:27 -0700 Subject: [PATCH 0967/1065] ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER In commit 242d3a49a2a1 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired, unfortunately, as reported by jeffy, netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event until all refs are gone. We have to add an additional check to avoid this corner case. For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED, for dev_change_net_namespace(), dev->reg_state is NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED. Fixes: 242d3a49a2a1 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") Reported-by: jeffy Cc: David Ahern Signed-off-by: Cong Wang Acked-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/route.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 7cebd954d5bb..322bd62e688b 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -3722,7 +3722,11 @@ static int ip6_route_dev_notify(struct notifier_block *this, net->ipv6.ip6_blk_hole_entry->dst.dev = dev; net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev); #endif - } else if (event == NETDEV_UNREGISTER) { + } else if (event == NETDEV_UNREGISTER && + dev->reg_state != NETREG_UNREGISTERED) { + /* NETDEV_UNREGISTER could be fired for multiple times by + * netdev_wait_allrefs(). Make sure we only call this once. + */ in6_dev_put(net->ipv6.ip6_null_entry->rt6i_idev); #ifdef CONFIG_IPV6_MULTIPLE_TABLES in6_dev_put(net->ipv6.ip6_prohibit_entry->rt6i_idev); From b88ff4f8c9ef0279f82bca0a83ed860b654f0f8d Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 21 Jun 2017 14:12:04 +0530 Subject: [PATCH 0968/1065] drivers: net: cpsw-common: Fix reading of mac address for am43 SoCs cpsw driver tries to get macid for am43xx SoCs using the compatible ti,am4372. But not all variants of am43x uses this complatible like epos evm uses ti,am438x. So use a generic compatible ti,am43 to get macid for all am43 based platforms. Reviewed-by: Dave Gerlach Signed-off-by: Lokesh Vutla Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/cpsw-common.c b/drivers/net/ethernet/ti/cpsw-common.c index 1562ab4151e1..56ba411421f0 100644 --- a/drivers/net/ethernet/ti/cpsw-common.c +++ b/drivers/net/ethernet/ti/cpsw-common.c @@ -90,7 +90,7 @@ int ti_cm_get_macid(struct device *dev, int slave, u8 *mac_addr) if (of_device_is_compatible(dev->of_node, "ti,dm816-emac")) return cpsw_am33xx_cm_get_macid(dev, 0x30, slave, mac_addr); - if (of_machine_is_compatible("ti,am4372")) + if (of_machine_is_compatible("ti,am43")) return cpsw_am33xx_cm_get_macid(dev, 0x630, slave, mac_addr); if (of_machine_is_compatible("ti,dra7")) From 191cdb3822e5df6b3c8b9f8cb8c4bf93f6cc90c7 Mon Sep 17 00:00:00 2001 From: Serhey Popovych Date: Wed, 21 Jun 2017 12:12:24 +0300 Subject: [PATCH 0969/1065] veth: Be more robust on network device creation when no attributes There are number of problems with configuration peer network device in absence of IFLA_VETH_PEER attributes where attributes for main network device shared with peer. First it is not feasible to configure both network devices with same MAC address since this makes communication in such configuration problematic. This case can be reproduced with following sequence: # ip link add address 02:11:22:33:44:55 type veth # ip li sh ... 26: veth0@veth1: mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff 27: veth1@veth0: mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff Second it is not possible to register both main and peer network devices with same name, that happens when name for main interface is given with IFLA_IFNAME and same attribute reused for peer. This case can be reproduced with following sequence: # ip link add dev veth1a type veth RTNETLINK answers: File exists To fix both of the cases check if corresponding netlink attributes are taken from peer_tb when valid or name based on rtnl ops kind and random address is used. Signed-off-by: Serhey Popovych Signed-off-by: David S. Miller --- drivers/net/veth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 0156fe8cac17..364fa9d11d1a 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -383,7 +383,7 @@ static int veth_newlink(struct net *src_net, struct net_device *dev, tbp = tb; } - if (tbp[IFLA_IFNAME]) { + if (ifmp && tbp[IFLA_IFNAME]) { nla_strlcpy(ifname, tbp[IFLA_IFNAME], IFNAMSIZ); name_assign_type = NET_NAME_USER; } else { @@ -402,7 +402,7 @@ static int veth_newlink(struct net *src_net, struct net_device *dev, return PTR_ERR(peer); } - if (tbp[IFLA_ADDRESS] == NULL) + if (!ifmp || !tbp[IFLA_ADDRESS]) eth_hw_addr_random(peer); if (ifmp && (dev->ifindex != 0)) From dfa523ae9f2542bee4cddaea37b3be3e157f6e6b Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Wed, 21 Jun 2017 10:21:22 +0100 Subject: [PATCH 0970/1065] xen-netback: correctly schedule rate-limited queues Add a flag to indicate if a queue is rate-limited. Test the flag in NAPI poll handler and avoid rescheduling the queue if true, otherwise we risk locking up the host. The rescheduling will be done in the timer callback function. Reported-by: Jean-Louis Dupond Signed-off-by: Wei Liu Tested-by: Jean-Louis Dupond Reviewed-by: Paul Durrant Signed-off-by: David S. Miller --- drivers/net/xen-netback/common.h | 1 + drivers/net/xen-netback/interface.c | 6 +++++- drivers/net/xen-netback/netback.c | 6 +++++- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h index 530586be05b4..5b1d2e8402d9 100644 --- a/drivers/net/xen-netback/common.h +++ b/drivers/net/xen-netback/common.h @@ -199,6 +199,7 @@ struct xenvif_queue { /* Per-queue data for xenvif */ unsigned long remaining_credit; struct timer_list credit_timeout; u64 credit_window_start; + bool rate_limited; /* Statistics */ struct xenvif_stats stats; diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index 8397f6c92451..e322a862ddfe 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -106,7 +106,11 @@ static int xenvif_poll(struct napi_struct *napi, int budget) if (work_done < budget) { napi_complete_done(napi, work_done); - xenvif_napi_schedule_or_enable_events(queue); + /* If the queue is rate-limited, it shall be + * rescheduled in the timer callback. + */ + if (likely(!queue->rate_limited)) + xenvif_napi_schedule_or_enable_events(queue); } return work_done; diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 602d408fa25e..5042ff8d449a 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -180,6 +180,7 @@ static void tx_add_credit(struct xenvif_queue *queue) max_credit = ULONG_MAX; /* wrapped: clamp to ULONG_MAX */ queue->remaining_credit = min(max_credit, max_burst); + queue->rate_limited = false; } void xenvif_tx_credit_callback(unsigned long data) @@ -686,8 +687,10 @@ static bool tx_credit_exceeded(struct xenvif_queue *queue, unsigned size) msecs_to_jiffies(queue->credit_usec / 1000); /* Timer could already be pending in rare cases. */ - if (timer_pending(&queue->credit_timeout)) + if (timer_pending(&queue->credit_timeout)) { + queue->rate_limited = true; return true; + } /* Passed the point where we can replenish credit? */ if (time_after_eq64(now, next_credit)) { @@ -702,6 +705,7 @@ static bool tx_credit_exceeded(struct xenvif_queue *queue, unsigned size) mod_timer(&queue->credit_timeout, next_credit); queue->credit_window_start = next_credit; + queue->rate_limited = true; return true; } From e26f43faa0d79dd06e9e94829696b68b9940c2ee Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 21 Jun 2017 07:59:16 -0400 Subject: [PATCH 0971/1065] macvlan: Do not return error when setting the same mac address The user currently gets an EBUSY error when attempting to set the mac address on a macvlan device to the same value. This should really be a no-op as nothing changes. Catch the condition and return early. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 67bf7ebae5c6..de214fbda173 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -703,6 +703,10 @@ static int macvlan_set_mac_address(struct net_device *dev, void *p) if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; + /* If the addresses are the same, this is a no-op */ + if (ether_addr_equal(dev->dev_addr, addr->sa_data)) + return 0; + if (vlan->mode == MACVLAN_MODE_PASSTHRU) { dev_set_mac_address(vlan->lowerdev, addr); return 0; From e696cda7bd091411705a4e868ce480eaa3082dbf Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 21 Jun 2017 07:59:17 -0400 Subject: [PATCH 0972/1065] macvlan: Fix passthru macvlan mac address inheritance When a lower device of the passthru macvlan changes it's address, passthru macvlan is supposed to change it's own address as well. However, that doesn't happen correctly because the check in macvlan_addr_busy() will catch the fact that the lower level (port) mac address is the same as the address we are trying to assign to the macvlan, and return an error. As a reasult, the address of the passthru macvlan device is never changed. The same thing happens when the user attempts to change the mac address of the passthru macvlan. The simple solution appers to be to not check against the lower device in case of passthru macvlan device, since the 2 addresses are _supposed_ to be the same. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index de214fbda173..0c9c6da3427a 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -185,7 +185,8 @@ static bool macvlan_addr_busy(const struct macvlan_port *port, * currently in use by the underlying device or * another macvlan. */ - if (ether_addr_equal_64bits(port->dev->dev_addr, addr)) + if (!port->passthru && + ether_addr_equal_64bits(port->dev->dev_addr, addr)) return true; if (macvlan_hash_lookup(port, addr)) From 43c2d578a0ce0d6067a02b46461811aced551425 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 21 Jun 2017 07:59:18 -0400 Subject: [PATCH 0973/1065] macvlan: convert port passthru to flags. Convert the port passthru boolean into flags with accesor functions. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 37 ++++++++++++++++++++++++------------- 1 file changed, 24 insertions(+), 13 deletions(-) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 0c9c6da3427a..4d013ca79dae 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -39,13 +39,15 @@ #define MACVLAN_HASH_SIZE (1<flags & MACVLAN_F_PASSTHRU; +} + +static inline void macvlan_set_passthru(struct macvlan_port *port) +{ + port->flags |= MACVLAN_F_PASSTHRU; +} + /* Hash Ethernet address */ static u32 macvlan_eth_hash(const unsigned char *addr) { @@ -185,7 +197,7 @@ static bool macvlan_addr_busy(const struct macvlan_port *port, * currently in use by the underlying device or * another macvlan. */ - if (!port->passthru && + if (!macvlan_passthru(port) && ether_addr_equal_64bits(port->dev->dev_addr, addr)) return true; @@ -446,7 +458,7 @@ static rx_handler_result_t macvlan_handle_frame(struct sk_buff **pskb) } macvlan_forward_source(skb, port, eth->h_source); - if (port->passthru) + if (macvlan_passthru(port)) vlan = list_first_or_null_rcu(&port->vlans, struct macvlan_dev, list); else @@ -575,7 +587,7 @@ static int macvlan_open(struct net_device *dev) struct net_device *lowerdev = vlan->lowerdev; int err; - if (vlan->port->passthru) { + if (macvlan_passthru(vlan->port)) { if (!(vlan->flags & MACVLAN_FLAG_NOPROMISC)) { err = dev_set_promiscuity(lowerdev, 1); if (err < 0) @@ -650,7 +662,7 @@ static int macvlan_stop(struct net_device *dev) dev_uc_unsync(lowerdev, dev); dev_mc_unsync(lowerdev, dev); - if (vlan->port->passthru) { + if (macvlan_passthru(vlan->port)) { if (!(vlan->flags & MACVLAN_FLAG_NOPROMISC)) dev_set_promiscuity(lowerdev, -1); goto hash_del; @@ -683,7 +695,7 @@ static int macvlan_sync_address(struct net_device *dev, unsigned char *addr) if (macvlan_addr_busy(vlan->port, addr)) return -EBUSY; - if (!vlan->port->passthru) { + if (!macvlan_passthru(vlan->port)) { err = dev_uc_add(lowerdev, addr); if (err) return err; @@ -933,7 +945,7 @@ static int macvlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], /* Support unicast filter only on passthru devices. * Multicast filter should be allowed on all devices. */ - if (!vlan->port->passthru && is_unicast_ether_addr(addr)) + if (!macvlan_passthru(vlan->port) && is_unicast_ether_addr(addr)) return -EOPNOTSUPP; if (flags & NLM_F_REPLACE) @@ -957,7 +969,7 @@ static int macvlan_fdb_del(struct ndmsg *ndm, struct nlattr *tb[], /* Support unicast filter only on passthru devices. * Multicast filter should be allowed on all devices. */ - if (!vlan->port->passthru && is_unicast_ether_addr(addr)) + if (!macvlan_passthru(vlan->port) && is_unicast_ether_addr(addr)) return -EOPNOTSUPP; if (is_unicast_ether_addr(addr)) @@ -1125,7 +1137,6 @@ static int macvlan_port_create(struct net_device *dev) if (port == NULL) return -ENOMEM; - port->passthru = false; port->dev = dev; INIT_LIST_HEAD(&port->vlans); for (i = 0; i < MACVLAN_HASH_SIZE; i++) @@ -1331,7 +1342,7 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, port = macvlan_port_get_rtnl(lowerdev); /* Only 1 macvlan device can be created in passthru mode */ - if (port->passthru) { + if (macvlan_passthru(port)) { /* The macvlan port must be not created this time, * still goto destroy_macvlan_port for readability. */ @@ -1357,7 +1368,7 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, err = -EINVAL; goto destroy_macvlan_port; } - port->passthru = true; + macvlan_set_passthru(port); eth_hw_addr_inherit(dev, lowerdev); } @@ -1439,7 +1450,7 @@ static int macvlan_changelink(struct net_device *dev, if (data && data[IFLA_MACVLAN_FLAGS]) { __u16 flags = nla_get_u16(data[IFLA_MACVLAN_FLAGS]); bool promisc = (flags ^ vlan->flags) & MACVLAN_FLAG_NOPROMISC; - if (vlan->port->passthru && promisc) { + if (macvlan_passthru(vlan->port) && promisc) { int err; if (flags & MACVLAN_FLAG_NOPROMISC) @@ -1602,7 +1613,7 @@ static int macvlan_device_event(struct notifier_block *unused, } break; case NETDEV_CHANGEADDR: - if (!port->passthru) + if (!macvlan_passthru(port)) return NOTIFY_DONE; vlan = list_first_entry_or_null(&port->vlans, From 18c8c54de9a619ba5533419e0170433e20c0ee3e Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 21 Jun 2017 07:59:19 -0400 Subject: [PATCH 0974/1065] macvlan: Let passthru macvlan correctly restore lower mac address Passthru macvlans directly change the mac address of the lower level device. That's OK, but after the macvlan is deleted, the lower device is left with changed address and one needs to reboot to bring back the origina HW addresses. This scenario is actually quite common with passthru macvtap devices. This patch attempts to solve this, by storing the mac address of the lower device in macvlan_port structure and keeping track of it through the changes. After this patch, any changes to the lower device mac address done trough the macvlan device, will be reverted back. Any changs done directly to the lower device mac address will be kept. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 47 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 44 insertions(+), 3 deletions(-) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 4d013ca79dae..72b801803aa4 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -40,6 +40,7 @@ #define MACVLAN_BC_QUEUE_LEN 1000 #define MACVLAN_F_PASSTHRU 1 +#define MACVLAN_F_ADDRCHANGE 2 struct macvlan_port { struct net_device *dev; @@ -51,6 +52,7 @@ struct macvlan_port { int count; struct hlist_head vlan_source_hash[MACVLAN_HASH_SIZE]; DECLARE_BITMAP(mc_filter, MACVLAN_MC_FILTER_SZ); + unsigned char perm_addr[ETH_ALEN]; }; struct macvlan_source_entry { @@ -78,6 +80,21 @@ static inline void macvlan_set_passthru(struct macvlan_port *port) port->flags |= MACVLAN_F_PASSTHRU; } +static inline bool macvlan_addr_change(const struct macvlan_port *port) +{ + return port->flags & MACVLAN_F_ADDRCHANGE; +} + +static inline void macvlan_set_addr_change(struct macvlan_port *port) +{ + port->flags |= MACVLAN_F_ADDRCHANGE; +} + +static inline void macvlan_clear_addr_change(struct macvlan_port *port) +{ + port->flags &= ~MACVLAN_F_ADDRCHANGE; +} + /* Hash Ethernet address */ static u32 macvlan_eth_hash(const unsigned char *addr) { @@ -193,11 +210,11 @@ static void macvlan_hash_change_addr(struct macvlan_dev *vlan, static bool macvlan_addr_busy(const struct macvlan_port *port, const unsigned char *addr) { - /* Test to see if the specified multicast address is + /* Test to see if the specified address is * currently in use by the underlying device or * another macvlan. */ - if (!macvlan_passthru(port) && + if (!macvlan_passthru(port) && !macvlan_addr_change(port) && ether_addr_equal_64bits(port->dev->dev_addr, addr)) return true; @@ -685,6 +702,7 @@ static int macvlan_sync_address(struct net_device *dev, unsigned char *addr) { struct macvlan_dev *vlan = netdev_priv(dev); struct net_device *lowerdev = vlan->lowerdev; + struct macvlan_port *port = vlan->port; int err; if (!(dev->flags & IFF_UP)) { @@ -695,7 +713,7 @@ static int macvlan_sync_address(struct net_device *dev, unsigned char *addr) if (macvlan_addr_busy(vlan->port, addr)) return -EBUSY; - if (!macvlan_passthru(vlan->port)) { + if (!macvlan_passthru(port)) { err = dev_uc_add(lowerdev, addr); if (err) return err; @@ -705,6 +723,15 @@ static int macvlan_sync_address(struct net_device *dev, unsigned char *addr) macvlan_hash_change_addr(vlan, addr); } + if (macvlan_passthru(port) && !macvlan_addr_change(port)) { + /* Since addr_change isn't set, we are here due to lower + * device change. Save the lower-dev address so we can + * restore it later. + */ + ether_addr_copy(vlan->port->perm_addr, + lowerdev->dev_addr); + } + macvlan_clear_addr_change(port); return 0; } @@ -721,6 +748,7 @@ static int macvlan_set_mac_address(struct net_device *dev, void *p) return 0; if (vlan->mode == MACVLAN_MODE_PASSTHRU) { + macvlan_set_addr_change(vlan->port); dev_set_mac_address(vlan->lowerdev, addr); return 0; } @@ -1138,6 +1166,7 @@ static int macvlan_port_create(struct net_device *dev) return -ENOMEM; port->dev = dev; + ether_addr_copy(port->perm_addr, dev->dev_addr); INIT_LIST_HEAD(&port->vlans); for (i = 0; i < MACVLAN_HASH_SIZE; i++) INIT_HLIST_HEAD(&port->vlan_hash[i]); @@ -1177,6 +1206,18 @@ static void macvlan_port_destroy(struct net_device *dev) kfree_skb(skb); } + /* If the lower device address has been changed by passthru + * macvlan, put it back. + */ + if (macvlan_passthru(port) && + !ether_addr_equal(port->dev->dev_addr, port->perm_addr)) { + struct sockaddr sa; + + sa.sa_family = port->dev->type; + memcpy(&sa.sa_data, port->perm_addr, port->dev->addr_len); + dev_set_mac_address(port->dev, &sa); + } + kfree(port); } From 60abc0be96e00ca71bac083215ac91ad2e575096 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Wed, 21 Jun 2017 14:34:58 -0700 Subject: [PATCH 0975/1065] ipv6: avoid unregistering inet6_dev for loopback The per netns loopback_dev->ip6_ptr is unregistered and set to NULL when its mtu is set to smaller than IPV6_MIN_MTU, this leads to that we could set rt->rt6i_idev NULL after a rt6_uncached_list_flush_dev() and then crash after another call. In this case we should just bring its inet6_dev down, rather than unregistering it, at least prior to commit 176c39af29bc ("netns: fix addrconf_ifdown kernel panic") we always override the case for loopback. Thanks a lot to Andrey for finding a reliable reproducer. Fixes: 176c39af29bc ("netns: fix addrconf_ifdown kernel panic") Reported-by: Andrey Konovalov Cc: Andrey Konovalov Cc: Daniel Lezcano Cc: David Ahern Signed-off-by: Cong Wang Acked-by: David Ahern Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 686c92375e81..1d2dbace42ff 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3369,6 +3369,7 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, struct net_device *dev = netdev_notifier_info_to_dev(ptr); struct netdev_notifier_changeupper_info *info; struct inet6_dev *idev = __in6_dev_get(dev); + struct net *net = dev_net(dev); int run_pending = 0; int err; @@ -3384,7 +3385,7 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, case NETDEV_CHANGEMTU: /* if MTU under IPV6_MIN_MTU stop IPv6 on this interface. */ if (dev->mtu < IPV6_MIN_MTU) { - addrconf_ifdown(dev, 1); + addrconf_ifdown(dev, dev != net->loopback_dev); break; } @@ -3500,7 +3501,7 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, * IPV6_MIN_MTU stop IPv6 on this interface. */ if (dev->mtu < IPV6_MIN_MTU) - addrconf_ifdown(dev, 1); + addrconf_ifdown(dev, dev != net->loopback_dev); } break; From b92b7d3312033a08cae2c879b9243c42ad7de94b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 22 Jun 2017 00:16:37 +0200 Subject: [PATCH 0976/1065] netvsc: don't access netdev->num_rx_queues directly This structure member is hidden behind CONFIG_SYSFS, and we get a build error when that is disabled: drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_channels': drivers/net/hyperv/netvsc_drv.c:754:49: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_rxfh': drivers/net/hyperv/netvsc_drv.c:1181:25: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? As the value is only set once to the argument of alloc_netdev_mq(), we can compare against that constant directly. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Fixes: 2b01888d1b45 ("netvsc: allow more flexible setting of number of channels") Signed-off-by: Arnd Bergmann Reviewed-by: Haiyang Zhang Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 82d6c022ca85..643c539a08ba 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -776,7 +776,7 @@ static int netvsc_set_channels(struct net_device *net, channels->rx_count || channels->tx_count || channels->other_count) return -EINVAL; - if (count > net->num_tx_queues || count > net->num_rx_queues) + if (count > net->num_tx_queues || count > VRSS_CHANNEL_MAX) return -EINVAL; if (!nvdev || nvdev->destroy) @@ -1203,7 +1203,7 @@ static int netvsc_set_rxfh(struct net_device *dev, const u32 *indir, rndis_dev = ndev->extension; if (indir) { for (i = 0; i < ITAB_NUM; i++) - if (indir[i] >= dev->num_rx_queues) + if (indir[i] >= VRSS_CHANNEL_MAX) return -EINVAL; for (i = 0; i < ITAB_NUM; i++) From bb53f4d4f5116d3dae76bb12fb16bc73771f958a Mon Sep 17 00:00:00 2001 From: Martin Habets Date: Thu, 22 Jun 2017 10:50:41 +0100 Subject: [PATCH 0977/1065] sfc: Fix MCDI command size for filter operations The 8000 series adapters uses catch-all filters for encapsulated traffic to support filtering VXLAN, NVGRE and GENEVE traffic. This new filter functionality requires a longer MCDI command. This patch increases the size of buffers on stack that were missed, which fixes a kernel panic from the stack protector. Fixes: 9b41080125176 ("sfc: insert catch-all filters for encapsulated traffic") Signed-off-by: Martin Habets Acked-by: Edward Cree Acked-by: Bert Kenward bkenward@solarflare.com Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 78efb2822b86..a8089667fc5b 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -4172,7 +4172,7 @@ found: * recipients */ if (is_mc_recip) { - MCDI_DECLARE_BUF(inbuf, MC_CMD_FILTER_OP_IN_LEN); + MCDI_DECLARE_BUF(inbuf, MC_CMD_FILTER_OP_EXT_IN_LEN); unsigned int depth, i; memset(inbuf, 0, sizeof(inbuf)); @@ -4320,7 +4320,7 @@ static int efx_ef10_filter_remove_internal(struct efx_nic *efx, efx_ef10_filter_set_entry(table, filter_idx, NULL, 0); } else { efx_mcdi_display_error(efx, MC_CMD_FILTER_OP, - MC_CMD_FILTER_OP_IN_LEN, + MC_CMD_FILTER_OP_EXT_IN_LEN, NULL, 0, rc); } } @@ -4453,7 +4453,7 @@ static s32 efx_ef10_filter_rfs_insert(struct efx_nic *efx, struct efx_filter_spec *spec) { struct efx_ef10_filter_table *table = efx->filter_state; - MCDI_DECLARE_BUF(inbuf, MC_CMD_FILTER_OP_IN_LEN); + MCDI_DECLARE_BUF(inbuf, MC_CMD_FILTER_OP_EXT_IN_LEN); struct efx_filter_spec *saved_spec; unsigned int hash, i, depth = 1; bool replacing = false; @@ -4940,7 +4940,7 @@ not_restored: static void efx_ef10_filter_table_remove(struct efx_nic *efx) { struct efx_ef10_filter_table *table = efx->filter_state; - MCDI_DECLARE_BUF(inbuf, MC_CMD_FILTER_OP_IN_LEN); + MCDI_DECLARE_BUF(inbuf, MC_CMD_FILTER_OP_EXT_IN_LEN); struct efx_filter_spec *spec; unsigned int filter_idx; int rc; From 7598f8bc1383ffd77686cb4e92e749bef3c75937 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B6rn=20T=C3=B6pel?= Date: Wed, 21 Jun 2017 18:41:34 +0200 Subject: [PATCH 0978/1065] perf probe: Fix probe definition for inlined functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit 613f050d68a8 ("perf probe: Fix to probe on gcc generated functions in modules"), the offset from symbol is, incorrectly, added to the trace point address. This leads to incorrect probe trace points for inlined functions and when using relative line number on symbols. Prior this patch: $ perf probe -m nf_nat -D in_range p:probe/in_range nf_nat:in_range.isra.9+0 $ perf probe -m i40e -D i40e_clean_rx_irq p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2212 $ perf probe -m i40e -D i40e_clean_rx_irq:16 p:probe/i40e_clean_rx_irq i40e:i40e_lan_xmit_frame+626 After: $ perf probe -m nf_nat -D in_range p:probe/in_range nf_nat:in_range.isra.9+0 $ perf probe -m i40e -D i40e_clean_rx_irq p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+1106 $ perf probe -m i40e -D i40e_clean_rx_irq:16 p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2665 Committer testing: Using 'pfunct', a tool found in the 'dwarves' package [1], one can ask what are the functions that while not being explicitely marked as inline, were inlined by the compiler: # pfunct --cc_inlined /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko | head __ew32 e1000_regdump e1000e_dump_ps_pages e1000_desc_unused e1000e_systim_to_hwtstamp e1000e_rx_hwtstamp e1000e_update_rdt_wa e1000e_update_tdt_wa e1000_put_txbuf e1000_consume_page Then ask 'perf probe' to produce the kprobe_tracer probe definitions for two of them: # perf probe -m e1000e -D e1000e_rx_hwtstamp p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+74 # perf probe -m e1000e -D e1000_consume_page p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+876 p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+1506 p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074 Now lets concentrate on the 'e1000_consume_page' one, that was inlined twice in e1000_clean_jumbo_rx_irq(), lets see what readelf says about the DWARF tags for that function: $ readelf -wi /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko <1><13e27b>: Abbrev Number: 121 (DW_TAG_subprogram) <13e27c> DW_AT_name : (indirect string, offset: 0xa8945): e1000_clean_jumbo_rx_irq <13e287> DW_AT_low_pc : 0x17a30 <3><13e6ef>: Abbrev Number: 119 (DW_TAG_inlined_subroutine) <13e6f0> DW_AT_abstract_origin: <0x13ed2c> <13e6f4> DW_AT_low_pc : 0x17be6 <1><13ed2c>: Abbrev Number: 142 (DW_TAG_subprogram) <13ed2e> DW_AT_name : (indirect string, offset: 0xa54c3): e1000_consume_page So, the first time in e1000_clean_jumbo_rx_irq() where e1000_consume_page() is inlined is at PC 0x17be6, which subtracted from e1000_clean_jumbo_rx_irq()'s address, gives us the offset we should use in the probe definition: 0x17be6 - 0x17a30 = 438 but above we have 876, which is twice as much. Lets see the second inline expansion of e1000_consume_page() in e1000_clean_jumbo_rx_irq(): <3><13e86e>: Abbrev Number: 119 (DW_TAG_inlined_subroutine) <13e86f> DW_AT_abstract_origin: <0x13ed2c> <13e873> DW_AT_low_pc : 0x17d21 0x17d21 - 0x17a30 = 753 So we where adding it at twice the offset from the containing function as we should. And then after this patch: # perf probe -m e1000e -D e1000e_rx_hwtstamp p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+37 # perf probe -m e1000e -D e1000_consume_page p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+438 p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+753 p:probe/e1000_consume_page_2 e1000e:e1000_clean_jumbo_rx_irq+1353 # Which matches the two first expansions and shows that because we were doubling the offset it would spill over the next function: readelf -sw /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko 673: 0000000000017a30 1626 FUNC LOCAL DEFAULT 2 e1000_clean_jumbo_rx_irq 674: 0000000000018090 2013 FUNC LOCAL DEFAULT 2 e1000_clean_rx_irq_ps This is the 3rd inline expansion of e1000_consume_page() in e1000_clean_jumbo_rx_irq(): <3><13ec77>: Abbrev Number: 119 (DW_TAG_inlined_subroutine) <13ec78> DW_AT_abstract_origin: <0x13ed2c> <13ec7c> DW_AT_low_pc : 0x17f79 0x17f79 - 0x17a30 = 1353 So: 0x17a30 + 2 * 1353 = 0x184c2 And: 0x184c2 - 0x18090 = 1074 Which explains the bogus third expansion for e1000_consume_page() to end up at: p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074 All fixed now :-) [1] https://git.kernel.org/pub/scm/devel/pahole/pahole.git/ Signed-off-by: Björn Töpel Tested-by: Arnaldo Carvalho de Melo Acked-by: Magnus Karlsson Acked-by: Masami Hiramatsu Cc: stable@vger.kernel.org Fixes: 613f050d68a8 ("perf probe: Fix to probe on gcc generated functions in modules") Link: http://lkml.kernel.org/r/20170621164134.5701-1-bjorn.topel@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/probe-event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index 84e7e698411e..a2670e9d652d 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -619,7 +619,7 @@ static int post_process_probe_trace_point(struct probe_trace_point *tp, struct map *map, unsigned long offs) { struct symbol *sym; - u64 addr = tp->address + tp->offset - offs; + u64 addr = tp->address - offs; sym = map__find_symbol(map, addr); if (!sym) From ad8181060788c80c0ad75b583f24c22fa962a7a6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 22 May 2017 18:44:57 -0700 Subject: [PATCH 0979/1065] kconfig: fix sparse warnings in nconfig Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'): ../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer ../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer ../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer ../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static? ../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static? ../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static? ../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors' ../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer nconf.gui.o before/after files are the same. nconf.o before/after files are the same until the 'static' function declarations are added. Signed-off-by: Randy Dunlap Signed-off-by: Masahiro Yamada --- scripts/kconfig/nconf.c | 12 ++++++------ scripts/kconfig/nconf.gui.c | 4 ++-- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index a9bc5334a478..003114779815 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -271,7 +271,7 @@ static struct mitem k_menu_items[MAX_MENU_ITEMS]; static int items_num; static int global_exit; /* the currently selected button */ -const char *current_instructions = menu_instructions; +static const char *current_instructions = menu_instructions; static char *dialog_input_result; static int dialog_input_result_len; @@ -305,7 +305,7 @@ struct function_keys { }; static const int function_keys_num = 9; -struct function_keys function_keys[] = { +static struct function_keys function_keys[] = { { .key_str = "F1", .func = "Help", @@ -508,7 +508,7 @@ static int get_mext_match(const char *match_str, match_f flag) index = (index + items_num) % items_num; while (true) { char *str = k_menu_items[index].str; - if (strcasestr(str, match_str) != 0) + if (strcasestr(str, match_str) != NULL) return index; if (flag == FIND_NEXT_MATCH_UP || flag == MATCH_TINKER_PATTERN_UP) @@ -1067,7 +1067,7 @@ static int do_match(int key, struct match_state *state, int *ans) static void conf(struct menu *menu) { - struct menu *submenu = 0; + struct menu *submenu = NULL; const char *prompt = menu_get_prompt(menu); struct symbol *sym; int res; @@ -1234,7 +1234,7 @@ static void show_help(struct menu *menu) static void conf_choice(struct menu *menu) { const char *prompt = _(menu_get_prompt(menu)); - struct menu *child = 0; + struct menu *child = NULL; struct symbol *active; int selected_index = 0; int last_top_row = 0; @@ -1456,7 +1456,7 @@ static void conf_save(void) } } -void setup_windows(void) +static void setup_windows(void) { int lines, columns; diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c index 4b2f44c20caf..a64b1c31253e 100644 --- a/scripts/kconfig/nconf.gui.c +++ b/scripts/kconfig/nconf.gui.c @@ -129,7 +129,7 @@ static void no_colors_theme(void) mkattrn(FUNCTION_TEXT, A_REVERSE); } -void set_colors() +void set_colors(void) { start_color(); use_default_colors(); @@ -192,7 +192,7 @@ const char *get_line(const char *text, int line_no) int lines = 0; if (!text) - return 0; + return NULL; for (i = 0; text[i] != '\0' && lines < line_no; i++) if (text[i] == '\n') From 34f19ff1b5a0d11e46df479623d6936460105c9f Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Wed, 21 Jun 2017 15:58:29 +1000 Subject: [PATCH 0980/1065] powerpc/64: Initialise thread_info for emergency stacks Emergency stacks have their thread_info mostly uninitialised, which in particular means garbage preempt_count values. Emergency stack code runs with interrupts disabled entirely, and is used very rarely, so this has been unnoticed so far. It was found by a proposed new powerpc watchdog that takes a soft-NMI directly from the masked_interrupt handler and using the emergency stack. That crashed at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be garbage. To fix this, zero the entire THREAD_SIZE allocation, and initialize the thread_info. Cc: stable@vger.kernel.org Reported-by: Abdul Haleem Signed-off-by: Nicholas Piggin [mpe: Move it all into setup_64.c, use a function not a macro. Fix crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET] Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/setup_64.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index a8c1f99e9607..4640f6d64f8b 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -615,6 +615,24 @@ void __init exc_lvl_early_init(void) } #endif +/* + * Emergency stacks are used for a range of things, from asynchronous + * NMIs (system reset, machine check) to synchronous, process context. + * We set preempt_count to zero, even though that isn't necessarily correct. To + * get the right value we'd need to copy it from the previous thread_info, but + * doing that might fault causing more problems. + * TODO: what to do with accounting? + */ +static void emerg_stack_init_thread_info(struct thread_info *ti, int cpu) +{ + ti->task = NULL; + ti->cpu = cpu; + ti->preempt_count = 0; + ti->local_flags = 0; + ti->flags = 0; + klp_init_thread_info(ti); +} + /* * Stack space used when we detect a bad kernel stack pointer, and * early in SMP boots before relocation is enabled. Exclusive emergency @@ -633,24 +651,31 @@ void __init emergency_stack_init(void) * Since we use these as temporary stacks during secondary CPU * bringup, we need to get at them in real mode. This means they * must also be within the RMO region. + * + * The IRQ stacks allocated elsewhere in this file are zeroed and + * initialized in kernel/irq.c. These are initialized here in order + * to have emergency stacks available as early as possible. */ limit = min(safe_stack_limit(), ppc64_rma_size); for_each_possible_cpu(i) { struct thread_info *ti; ti = __va(memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit)); - klp_init_thread_info(ti); + memset(ti, 0, THREAD_SIZE); + emerg_stack_init_thread_info(ti, i); paca[i].emergency_sp = (void *)ti + THREAD_SIZE; #ifdef CONFIG_PPC_BOOK3S_64 /* emergency stack for NMI exception handling. */ ti = __va(memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit)); - klp_init_thread_info(ti); + memset(ti, 0, THREAD_SIZE); + emerg_stack_init_thread_info(ti, i); paca[i].nmi_emergency_sp = (void *)ti + THREAD_SIZE; /* emergency stack for machine check exception handling. */ ti = __va(memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit)); - klp_init_thread_info(ti); + memset(ti, 0, THREAD_SIZE); + emerg_stack_init_thread_info(ti, i); paca[i].mc_emergency_sp = (void *)ti + THREAD_SIZE; #endif } From 797625deaedd9a0621376817db2813244b3246e3 Mon Sep 17 00:00:00 2001 From: Christophe Lombard Date: Tue, 13 Jun 2017 17:41:05 +0200 Subject: [PATCH 0981/1065] cxl: Fixes for Coherent Accelerator Interface Architecture 2.0 A previous set of patches "cxl: Add support for Coherent Accelerator Interface Architecture 2.0" has introduced a new support for the CAPI cards. These patches have been tested on Simulation environment and quite a bit of them have been tested on real hardware. This patch brings new fixes after a series of tests carried out on new equipment: - Add POWER9 definition. - Re-enable any masked interrupts when the AFU is not activated after resetting the AFU. - Remove the api cxl_is_psl8/9 which is no longer useful. - Do not dump CAPI1 registers. - Rewrite cxl_is_page_fault() function. - Do not register slb callack on P9. Fixes: f24be42aab37 ("cxl: Add psl9 specific code") Signed-off-by: Christophe Lombard Acked-by: Frederic Barrat Signed-off-by: Michael Ellerman --- drivers/misc/cxl/context.c | 6 +++--- drivers/misc/cxl/cxl.h | 18 +++++------------- drivers/misc/cxl/fault.c | 23 +++++++++++++++-------- drivers/misc/cxl/main.c | 17 +++++++++++++---- drivers/misc/cxl/native.c | 29 +++++++++++++++++------------ drivers/misc/cxl/pci.c | 11 ++++------- 6 files changed, 57 insertions(+), 47 deletions(-) diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c index 4472ce11f98d..8c32040b9c09 100644 --- a/drivers/misc/cxl/context.c +++ b/drivers/misc/cxl/context.c @@ -45,7 +45,7 @@ int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master) mutex_init(&ctx->mapping_lock); ctx->mapping = NULL; - if (cxl_is_psl8(afu)) { + if (cxl_is_power8()) { spin_lock_init(&ctx->sste_lock); /* @@ -189,7 +189,7 @@ int cxl_context_iomap(struct cxl_context *ctx, struct vm_area_struct *vma) if (start + len > ctx->afu->adapter->ps_size) return -EINVAL; - if (cxl_is_psl9(ctx->afu)) { + if (cxl_is_power9()) { /* * Make sure there is a valid problem state * area space for this AFU. @@ -324,7 +324,7 @@ static void reclaim_ctx(struct rcu_head *rcu) { struct cxl_context *ctx = container_of(rcu, struct cxl_context, rcu); - if (cxl_is_psl8(ctx->afu)) + if (cxl_is_power8()) free_page((u64)ctx->sstp); if (ctx->ff_page) __free_page(ctx->ff_page); diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h index c8568ea7c518..a03f8e7535e5 100644 --- a/drivers/misc/cxl/cxl.h +++ b/drivers/misc/cxl/cxl.h @@ -357,6 +357,7 @@ static const cxl_p2n_reg_t CXL_PSL_WED_An = {0x0A0}; #define CXL_PSL9_DSISR_An_PF_RGP 0x0000000000000090ULL /* PTE not found (Radix Guest (parent)) 0b10010000 */ #define CXL_PSL9_DSISR_An_PF_HRH 0x0000000000000094ULL /* PTE not found (HPT/Radix Host) 0b10010100 */ #define CXL_PSL9_DSISR_An_PF_STEG 0x000000000000009CULL /* PTE not found (STEG VA) 0b10011100 */ +#define CXL_PSL9_DSISR_An_URTCH 0x00000000000000B4ULL /* Unsupported Radix Tree Configuration 0b10110100 */ /****** CXL_PSL_TFC_An ******************************************************/ #define CXL_PSL_TFC_An_A (1ull << (63-28)) /* Acknowledge non-translation fault */ @@ -844,24 +845,15 @@ static inline bool cxl_is_power8(void) static inline bool cxl_is_power9(void) { - /* intermediate solution */ - if (!cxl_is_power8() && - (cpu_has_feature(CPU_FTRS_POWER9) || - cpu_has_feature(CPU_FTR_POWER9_DD1))) + if (pvr_version_is(PVR_POWER9)) return true; return false; } -static inline bool cxl_is_psl8(struct cxl_afu *afu) +static inline bool cxl_is_power9_dd1(void) { - if (afu->adapter->caia_major == 1) - return true; - return false; -} - -static inline bool cxl_is_psl9(struct cxl_afu *afu) -{ - if (afu->adapter->caia_major == 2) + if ((pvr_version_is(PVR_POWER9)) && + cpu_has_feature(CPU_FTR_POWER9_DD1)) return true; return false; } diff --git a/drivers/misc/cxl/fault.c b/drivers/misc/cxl/fault.c index 5344448f514e..c79e39bad7a4 100644 --- a/drivers/misc/cxl/fault.c +++ b/drivers/misc/cxl/fault.c @@ -187,7 +187,7 @@ static struct mm_struct *get_mem_context(struct cxl_context *ctx) static bool cxl_is_segment_miss(struct cxl_context *ctx, u64 dsisr) { - if ((cxl_is_psl8(ctx->afu)) && (dsisr & CXL_PSL_DSISR_An_DS)) + if ((cxl_is_power8() && (dsisr & CXL_PSL_DSISR_An_DS))) return true; return false; @@ -195,15 +195,22 @@ static bool cxl_is_segment_miss(struct cxl_context *ctx, u64 dsisr) static bool cxl_is_page_fault(struct cxl_context *ctx, u64 dsisr) { - if ((cxl_is_psl8(ctx->afu)) && (dsisr & CXL_PSL_DSISR_An_DM)) + u64 crs; /* Translation Checkout Response Status */ + + if ((cxl_is_power8()) && (dsisr & CXL_PSL_DSISR_An_DM)) return true; - if ((cxl_is_psl9(ctx->afu)) && - ((dsisr & CXL_PSL9_DSISR_An_CO_MASK) & - (CXL_PSL9_DSISR_An_PF_SLR | CXL_PSL9_DSISR_An_PF_RGC | - CXL_PSL9_DSISR_An_PF_RGP | CXL_PSL9_DSISR_An_PF_HRH | - CXL_PSL9_DSISR_An_PF_STEG))) - return true; + if (cxl_is_power9()) { + crs = (dsisr & CXL_PSL9_DSISR_An_CO_MASK); + if ((crs == CXL_PSL9_DSISR_An_PF_SLR) || + (crs == CXL_PSL9_DSISR_An_PF_RGC) || + (crs == CXL_PSL9_DSISR_An_PF_RGP) || + (crs == CXL_PSL9_DSISR_An_PF_HRH) || + (crs == CXL_PSL9_DSISR_An_PF_STEG) || + (crs == CXL_PSL9_DSISR_An_URTCH)) { + return true; + } + } return false; } diff --git a/drivers/misc/cxl/main.c b/drivers/misc/cxl/main.c index 1703655072b1..c1ba0d42cbc8 100644 --- a/drivers/misc/cxl/main.c +++ b/drivers/misc/cxl/main.c @@ -329,8 +329,15 @@ static int __init init_cxl(void) cxl_debugfs_init(); - if ((rc = register_cxl_calls(&cxl_calls))) - goto err; + /* + * we don't register the callback on P9. slb callack is only + * used for the PSL8 MMU and CX4. + */ + if (cxl_is_power8()) { + rc = register_cxl_calls(&cxl_calls); + if (rc) + goto err; + } if (cpu_has_feature(CPU_FTR_HVMODE)) { cxl_ops = &cxl_native_ops; @@ -347,7 +354,8 @@ static int __init init_cxl(void) return 0; err1: - unregister_cxl_calls(&cxl_calls); + if (cxl_is_power8()) + unregister_cxl_calls(&cxl_calls); err: cxl_debugfs_exit(); cxl_file_exit(); @@ -366,7 +374,8 @@ static void exit_cxl(void) cxl_debugfs_exit(); cxl_file_exit(); - unregister_cxl_calls(&cxl_calls); + if (cxl_is_power8()) + unregister_cxl_calls(&cxl_calls); idr_destroy(&cxl_adapter_idr); } diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c index 8d6ea9712dbd..2b2f8894149d 100644 --- a/drivers/misc/cxl/native.c +++ b/drivers/misc/cxl/native.c @@ -105,11 +105,16 @@ static int native_afu_reset(struct cxl_afu *afu) CXL_AFU_Cntl_An_RS_MASK | CXL_AFU_Cntl_An_ES_MASK, false); - /* Re-enable any masked interrupts */ - serr = cxl_p1n_read(afu, CXL_PSL_SERR_An); - serr &= ~CXL_PSL_SERR_An_IRQ_MASKS; - cxl_p1n_write(afu, CXL_PSL_SERR_An, serr); - + /* + * Re-enable any masked interrupts when the AFU is not + * activated to avoid side effects after attaching a process + * in dedicated mode. + */ + if (afu->current_mode == 0) { + serr = cxl_p1n_read(afu, CXL_PSL_SERR_An); + serr &= ~CXL_PSL_SERR_An_IRQ_MASKS; + cxl_p1n_write(afu, CXL_PSL_SERR_An, serr); + } return rc; } @@ -139,9 +144,9 @@ int cxl_psl_purge(struct cxl_afu *afu) pr_devel("PSL purge request\n"); - if (cxl_is_psl8(afu)) + if (cxl_is_power8()) trans_fault = CXL_PSL_DSISR_TRANS; - if (cxl_is_psl9(afu)) + if (cxl_is_power9()) trans_fault = CXL_PSL9_DSISR_An_TF; if (!cxl_ops->link_ok(afu->adapter, afu)) { @@ -603,7 +608,7 @@ static u64 calculate_sr(struct cxl_context *ctx) if (!test_tsk_thread_flag(current, TIF_32BIT)) sr |= CXL_PSL_SR_An_SF; } - if (cxl_is_psl9(ctx->afu)) { + if (cxl_is_power9()) { if (radix_enabled()) sr |= CXL_PSL_SR_An_XLAT_ror; else @@ -1117,10 +1122,10 @@ static irqreturn_t native_handle_psl_slice_error(struct cxl_context *ctx, static bool cxl_is_translation_fault(struct cxl_afu *afu, u64 dsisr) { - if ((cxl_is_psl8(afu)) && (dsisr & CXL_PSL_DSISR_TRANS)) + if ((cxl_is_power8()) && (dsisr & CXL_PSL_DSISR_TRANS)) return true; - if ((cxl_is_psl9(afu)) && (dsisr & CXL_PSL9_DSISR_An_TF)) + if ((cxl_is_power9()) && (dsisr & CXL_PSL9_DSISR_An_TF)) return true; return false; @@ -1194,10 +1199,10 @@ static void native_irq_wait(struct cxl_context *ctx) if (ph != ctx->pe) return; dsisr = cxl_p2n_read(ctx->afu, CXL_PSL_DSISR_An); - if (cxl_is_psl8(ctx->afu) && + if (cxl_is_power8() && ((dsisr & CXL_PSL_DSISR_PENDING) == 0)) return; - if (cxl_is_psl9(ctx->afu) && + if (cxl_is_power9() && ((dsisr & CXL_PSL9_DSISR_PENDING) == 0)) return; /* diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c index 6dc1ee5b92c9..1eb9859809bf 100644 --- a/drivers/misc/cxl/pci.c +++ b/drivers/misc/cxl/pci.c @@ -436,7 +436,7 @@ static int init_implementation_adapter_regs_psl9(struct cxl *adapter, struct pci /* nMMU_ID Defaults to: b’000001001’*/ xsl_dsnctl |= ((u64)0x09 << (63-28)); - if (cxl_is_power9() && !cpu_has_feature(CPU_FTR_POWER9_DD1)) { + if (!(cxl_is_power9_dd1())) { /* * Used to identify CAPI packets which should be sorted into * the Non-Blocking queues by the PHB. This field should match @@ -491,7 +491,7 @@ static int init_implementation_adapter_regs_psl9(struct cxl *adapter, struct pci cxl_p1_write(adapter, CXL_PSL9_APCDEDTYPE, 0x40000003FFFF0000ULL); /* Disable vc dd1 fix */ - if ((cxl_is_power9() && cpu_has_feature(CPU_FTR_POWER9_DD1))) + if (cxl_is_power9_dd1()) cxl_p1_write(adapter, CXL_PSL9_GP_CT, 0x0400000000000001ULL); return 0; @@ -1439,8 +1439,7 @@ int cxl_pci_reset(struct cxl *adapter) * The adapter is about to be reset, so ignore errors. * Not supported on P9 DD1 */ - if ((cxl_is_power8()) || - ((cxl_is_power9() && !cpu_has_feature(CPU_FTR_POWER9_DD1)))) + if ((cxl_is_power8()) || (!(cxl_is_power9_dd1()))) cxl_data_cache_flush(adapter); /* pcie_warm_reset requests a fundamental pci reset which includes a @@ -1750,7 +1749,6 @@ static const struct cxl_service_layer_ops psl9_ops = { .debugfs_add_adapter_regs = cxl_debugfs_add_adapter_regs_psl9, .debugfs_add_afu_regs = cxl_debugfs_add_afu_regs_psl9, .psl_irq_dump_registers = cxl_native_irq_dump_regs_psl9, - .err_irq_dump_registers = cxl_native_err_irq_dump_regs, .debugfs_stop_trace = cxl_stop_trace_psl9, .write_timebase_ctrl = write_timebase_ctrl_psl9, .timebase_read = timebase_read_psl9, @@ -1889,8 +1887,7 @@ static void cxl_pci_remove_adapter(struct cxl *adapter) * Flush adapter datacache as its about to be removed. * Not supported on P9 DD1. */ - if ((cxl_is_power8()) || - ((cxl_is_power9() && !cpu_has_feature(CPU_FTR_POWER9_DD1)))) + if ((cxl_is_power8()) || (!(cxl_is_power9_dd1()))) cxl_data_cache_flush(adapter); cxl_deconfigure_adapter(adapter); From 9768935264c4f0e4afd788a185d8e8d89c28e41d Mon Sep 17 00:00:00 2001 From: Andrew Duggan Date: Fri, 23 Jun 2017 00:04:51 -0700 Subject: [PATCH 0982/1065] Input: synaptics-rmi4 - only read the F54 query registers which are used The F54 driver is currently only using the first 6 bytes of F54 so there is no need to read all 27 bytes. Some Dell systems (Dell XP13 9333 and similar) have an issue with the touchpad or I2C bus when reading reports larger then 16 bytes. Reads larger then 16 bytes are reported in two HID reports. Something about the back to back reports seems to cause the next read to report incorrect data. This results in F30 failing to load and the click button failing to work. Previous issues with the I2C controller or touchpad were addressed in: commit 5b65c2a02966 ("HID: rmi: check sanity of the incoming report") Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=195949 Signed-off-by: Andrew Duggan Reviewed-by: Benjamin Tissoires Reviewed-by: Nick Dyer Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_f54.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c index dea63e2db3e6..f5206e2c767e 100644 --- a/drivers/input/rmi4/rmi_f54.c +++ b/drivers/input/rmi4/rmi_f54.c @@ -31,9 +31,6 @@ #define F54_GET_REPORT 1 #define F54_FORCE_CAL 2 -/* Fixed sizes of reports */ -#define F54_QUERY_LEN 27 - /* F54 capabilities */ #define F54_CAP_BASELINE (1 << 2) #define F54_CAP_IMAGE8 (1 << 3) @@ -95,7 +92,6 @@ struct rmi_f54_reports { struct f54_data { struct rmi_function *fn; - u8 qry[F54_QUERY_LEN]; u8 num_rx_electrodes; u8 num_tx_electrodes; u8 capabilities; @@ -632,22 +628,23 @@ static int rmi_f54_detect(struct rmi_function *fn) { int error; struct f54_data *f54; + u8 buf[6]; f54 = dev_get_drvdata(&fn->dev); error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, - &f54->qry, sizeof(f54->qry)); + buf, sizeof(buf)); if (error) { dev_err(&fn->dev, "%s: Failed to query F54 properties\n", __func__); return error; } - f54->num_rx_electrodes = f54->qry[0]; - f54->num_tx_electrodes = f54->qry[1]; - f54->capabilities = f54->qry[2]; - f54->clock_rate = f54->qry[3] | (f54->qry[4] << 8); - f54->family = f54->qry[5]; + f54->num_rx_electrodes = buf[0]; + f54->num_tx_electrodes = buf[1]; + f54->capabilities = buf[2]; + f54->clock_rate = buf[3] | (buf[4] << 8); + f54->family = buf[5]; rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 num_rx_electrodes: %d\n", f54->num_rx_electrodes); From c4d097d13052d1e6f29b8798264aed6135d99568 Mon Sep 17 00:00:00 2001 From: Heinz Mauelshagen Date: Fri, 23 Jun 2017 17:27:01 +0200 Subject: [PATCH 0983/1065] dm raid: fix oops on upgrading to extended superblock format When a RAID set was created on dm-raid version < 1.9.0 (old RAID superblock format), all of the new 1.9.0 members of the superblock are uninitialized (zero) -- including the device sectors member needed to support shrinking. All the other accesses to superblock fields new in 1.9.0 were reviewed and verified to be properly guarded against invalid use. The 'sectors' member was the only one used when the superblock version is < 1.9. Don't access the superblock's >= 1.9.0 'sectors' member unconditionally. Also add respective comments. Signed-off-by: Heinz Mauelshagen Signed-off-by: Mike Snitzer --- drivers/md/dm-raid.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index 7d893228c40f..b4b75dad816a 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -1927,7 +1927,7 @@ struct dm_raid_superblock { /******************************************************************** * BELOW FOLLOW V1.9.0 EXTENSIONS TO THE PRISTINE SUPERBLOCK FORMAT!!! * - * FEATURE_FLAG_SUPPORTS_V190 in the features member indicates that those exist + * FEATURE_FLAG_SUPPORTS_V190 in the compat_features member indicates that those exist */ __le32 flags; /* Flags defining array states for reshaping */ @@ -2092,6 +2092,11 @@ static void super_sync(struct mddev *mddev, struct md_rdev *rdev) sb->layout = cpu_to_le32(mddev->layout); sb->stripe_sectors = cpu_to_le32(mddev->chunk_sectors); + /******************************************************************** + * BELOW FOLLOW V1.9.0 EXTENSIONS TO THE PRISTINE SUPERBLOCK FORMAT!!! + * + * FEATURE_FLAG_SUPPORTS_V190 in the compat_features member indicates that those exist + */ sb->new_level = cpu_to_le32(mddev->new_level); sb->new_layout = cpu_to_le32(mddev->new_layout); sb->new_stripe_sectors = cpu_to_le32(mddev->new_chunk_sectors); @@ -2438,8 +2443,14 @@ static int super_validate(struct raid_set *rs, struct md_rdev *rdev) mddev->bitmap_info.default_offset = mddev->bitmap_info.offset; if (!test_and_clear_bit(FirstUse, &rdev->flags)) { - /* Retrieve device size stored in superblock to be prepared for shrink */ - rdev->sectors = le64_to_cpu(sb->sectors); + /* + * Retrieve rdev size stored in superblock to be prepared for shrink. + * Check extended superblock members are present otherwise the size + * will not be set! + */ + if (le32_to_cpu(sb->compat_features) & FEATURE_FLAG_SUPPORTS_V190) + rdev->sectors = le64_to_cpu(sb->sectors); + rdev->recovery_offset = le64_to_cpu(sb->disk_recovery_offset); if (rdev->recovery_offset == MaxSector) set_bit(In_sync, &rdev->flags); From a5cb659bbc1c8644efa0c3138a757a1e432a4880 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Mon, 19 Jun 2017 13:03:43 +0200 Subject: [PATCH 0984/1065] net: account for current skb length when deciding about UFO Our customer encountered stuck NFS writes for blocks starting at specific offsets w.r.t. page boundary caused by networking stack sending packets via UFO enabled device with wrong checksum. The problem can be reproduced by composing a long UDP datagram from multiple parts using MSG_MORE flag: sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 3000, 0, ...); Assume this packet is to be routed via a device with MTU 1500 and NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(), this condition is tested (among others) to decide whether to call ip_ufo_append_data(): ((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb)) At the moment, we already have skb with 1028 bytes of data which is not marked for GSO so that the test is false (fragheaderlen is usually 20). Thus we append second 1000 bytes to this skb without invoking UFO. Third sendto(), however, has sufficient length to trigger the UFO path so that we end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb() uses udp_csum() to calculate the checksum but that assumes all fragments have correct checksum in skb->csum which is not true for UFO fragments. When checking against MTU, we need to add skb->len to length of new segment if we already have a partially filled skb and fragheaderlen only if there isn't one. In the IPv6 case, skb can only be null if this is the first segment so that we have to use headersize (length of the first IPv6 header) rather than fragheaderlen (length of IPv6 header of further fragments) for skb == NULL. Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") Fixes: e4c5e13aa45c ("ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output") Signed-off-by: Michal Kubecek Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 3 ++- net/ipv6/ip6_output.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 7a3fd25e8913..532b36e9ce2a 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -964,7 +964,8 @@ static int __ip_append_data(struct sock *sk, csummode = CHECKSUM_PARTIAL; cork->length += length; - if ((((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))) && + if ((((length + (skb ? skb->len : fragheaderlen)) > mtu) || + (skb && skb_is_gso(skb))) && (sk->sk_protocol == IPPROTO_UDP) && (rt->dst.dev->features & NETIF_F_UFO) && !dst_xfrm(&rt->dst) && (sk->sk_type == SOCK_DGRAM) && !sk->sk_no_check_tx) { diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index bf8a58a1c32d..1699acb2fa2c 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1390,7 +1390,7 @@ emsgsize: */ cork->length += length; - if ((((length + fragheaderlen) > mtu) || + if ((((length + (skb ? skb->len : headersize)) > mtu) || (skb && skb_is_gso(skb))) && (sk->sk_protocol == IPPROTO_UDP) && (rt->dst.dev->features & NETIF_F_UFO) && !dst_xfrm(&rt->dst) && From 0ccc22f425e56c4ede9c66f1945846de8ac1f352 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 22 Jun 2017 15:29:33 -0700 Subject: [PATCH 0985/1065] sit: use __GFP_NOWARN for user controlled allocation The memory allocation size is controlled by user-space, if it is too large just fail silently and return NULL, not to mention there is a fallback allocation later. Reported-by: Andrey Konovalov Signed-off-by: Cong Wang Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- net/ipv6/sit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 2378503577b0..f8ad15891cd7 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -305,7 +305,7 @@ static int ipip6_tunnel_get_prl(struct ip_tunnel *t, * we try harder to allocate. */ kp = (cmax <= 1 || capable(CAP_NET_ADMIN)) ? - kcalloc(cmax, sizeof(*kp), GFP_KERNEL) : + kcalloc(cmax, sizeof(*kp), GFP_KERNEL | __GFP_NOWARN) : NULL; rcu_read_lock(); From db9d8b29d19d2801793e4419f4c6272bf8951c62 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Fri, 23 Jun 2017 17:51:31 +0200 Subject: [PATCH 0986/1065] net: dp83640: Avoid NULL pointer dereference. The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8cdb69051b95a55ab0c489e3cab261c8ef ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up. Even though the kernel-doc was subsequently updated in commit 7a76a021cd5a292be875fbc616daf03eab1e6996 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version. This fix should be applied to the stable trees as well. Fixes: 81e8f2e930fe ("net: dp83640: Fix tx timestamp overflow handling.") Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/dp83640.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index ed0d10f54f26..c3065236ffcc 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -908,7 +908,7 @@ static void decode_txts(struct dp83640_private *dp83640, if (overflow) { pr_debug("tx timestamp queue overflow, count %d\n", overflow); while (skb) { - skb_complete_tx_timestamp(skb, NULL); + kfree_skb(skb); skb = skb_dequeue(&dp83640->tx_queue); } return; From 69c149e2e39e8d66437c9034bb4926ef2c1f7c23 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 23 Jun 2017 14:01:00 -0400 Subject: [PATCH 0987/1065] bnxt_en: Add missing logic to handle TPA end error conditions. When we get a TPA_END completion to handle a completed LRO packet, it is possible that hardware would indicate errors. The current code is not checking for the error condition. Define the proper error bits and the macro to check for this error and abort properly. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 ++++--- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 6 +++++- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 03f55daecb20..f5ba8ec1b67f 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1301,10 +1301,11 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp, cp_cons = NEXT_CMP(cp_cons); } - if (unlikely(agg_bufs > MAX_SKB_FRAGS)) { + if (unlikely(agg_bufs > MAX_SKB_FRAGS || TPA_END_ERRORS(tpa_end1))) { bnxt_abort_tpa(bp, bnapi, cp_cons, agg_bufs); - netdev_warn(bp->dev, "TPA frags %d exceeded MAX_SKB_FRAGS %d\n", - agg_bufs, (int)MAX_SKB_FRAGS); + if (agg_bufs > MAX_SKB_FRAGS) + netdev_warn(bp->dev, "TPA frags %d exceeded MAX_SKB_FRAGS %d\n", + agg_bufs, (int)MAX_SKB_FRAGS); return NULL; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 3ef42dbc6327..d46a85041083 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -374,12 +374,16 @@ struct rx_tpa_end_cmp_ext { __le32 rx_tpa_end_cmp_errors_v2; #define RX_TPA_END_CMP_V2 (0x1 << 0) - #define RX_TPA_END_CMP_ERRORS (0x7fff << 1) + #define RX_TPA_END_CMP_ERRORS (0x3 << 1) #define RX_TPA_END_CMPL_ERRORS_SHIFT 1 u32 rx_tpa_end_cmp_start_opaque; }; +#define TPA_END_ERRORS(rx_tpa_end_ext) \ + ((rx_tpa_end_ext)->rx_tpa_end_cmp_errors_v2 & \ + cpu_to_le32(RX_TPA_END_CMP_ERRORS)) + #define DB_IDX_MASK 0xffffff #define DB_IDX_VALID (0x1 << 26) #define DB_IRQ_DIS (0x1 << 27) From 2270bc5da34979454e6f2eb133d800b635156174 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 23 Jun 2017 14:01:01 -0400 Subject: [PATCH 0988/1065] bnxt_en: Fix netpoll handling. To handle netpoll properly, the driver must only handle TX packets during NAPI. Handling RX events cause warnings and errors in netpoll mode. The ndo_poll_controller() method should call napi_schedule() directly so that a NAPI weight of zero will be used during netpoll mode. The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx. In separate rx/tx mode, the ndo_poll_controller() method will only process the tx rings. In combined mode, the rx and tx completion entries are mixed in the completion ring and we need to drop the rx entries and recycle the rx buffers. Add a function bnxt_force_rx_discard() to handle this in netpoll mode when we see rx entries in combined ring mode. Reported-by: Calvin Owens Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 54 ++++++++++++++++++++--- 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index f5ba8ec1b67f..74e8e215524d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1563,6 +1563,45 @@ next_rx_no_prod: return rc; } +/* In netpoll mode, if we are using a combined completion ring, we need to + * discard the rx packets and recycle the buffers. + */ +static int bnxt_force_rx_discard(struct bnxt *bp, struct bnxt_napi *bnapi, + u32 *raw_cons, u8 *event) +{ + struct bnxt_cp_ring_info *cpr = &bnapi->cp_ring; + u32 tmp_raw_cons = *raw_cons; + struct rx_cmp_ext *rxcmp1; + struct rx_cmp *rxcmp; + u16 cp_cons; + u8 cmp_type; + + cp_cons = RING_CMP(tmp_raw_cons); + rxcmp = (struct rx_cmp *) + &cpr->cp_desc_ring[CP_RING(cp_cons)][CP_IDX(cp_cons)]; + + tmp_raw_cons = NEXT_RAW_CMP(tmp_raw_cons); + cp_cons = RING_CMP(tmp_raw_cons); + rxcmp1 = (struct rx_cmp_ext *) + &cpr->cp_desc_ring[CP_RING(cp_cons)][CP_IDX(cp_cons)]; + + if (!RX_CMP_VALID(rxcmp1, tmp_raw_cons)) + return -EBUSY; + + cmp_type = RX_CMP_TYPE(rxcmp); + if (cmp_type == CMP_TYPE_RX_L2_CMP) { + rxcmp1->rx_cmp_cfa_code_errors_v2 |= + cpu_to_le32(RX_CMPL_ERRORS_CRC_ERROR); + } else if (cmp_type == CMP_TYPE_RX_L2_TPA_END_CMP) { + struct rx_tpa_end_cmp_ext *tpa_end1; + + tpa_end1 = (struct rx_tpa_end_cmp_ext *)rxcmp1; + tpa_end1->rx_tpa_end_cmp_errors_v2 |= + cpu_to_le32(RX_TPA_END_CMP_ERRORS); + } + return bnxt_rx_pkt(bp, bnapi, raw_cons, event); +} + #define BNXT_GET_EVENT_PORT(data) \ ((data) & \ ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK) @@ -1745,7 +1784,11 @@ static int bnxt_poll_work(struct bnxt *bp, struct bnxt_napi *bnapi, int budget) if (unlikely(tx_pkts > bp->tx_wake_thresh)) rx_pkts = budget; } else if ((TX_CMP_TYPE(txcmp) & 0x30) == 0x10) { - rc = bnxt_rx_pkt(bp, bnapi, &raw_cons, &event); + if (likely(budget)) + rc = bnxt_rx_pkt(bp, bnapi, &raw_cons, &event); + else + rc = bnxt_force_rx_discard(bp, bnapi, &raw_cons, + &event); if (likely(rc >= 0)) rx_pkts += rc; else if (rc == -EBUSY) /* partial completion */ @@ -6664,12 +6707,11 @@ static void bnxt_poll_controller(struct net_device *dev) struct bnxt *bp = netdev_priv(dev); int i; - for (i = 0; i < bp->cp_nr_rings; i++) { - struct bnxt_irq *irq = &bp->irq_tbl[i]; + /* Only process tx rings/combined rings in netpoll mode. */ + for (i = 0; i < bp->tx_nr_rings; i++) { + struct bnxt_tx_ring_info *txr = &bp->tx_ring[i]; - disable_irq(irq->vector); - irq->handler(irq->vector, bp->bnapi[i]); - enable_irq(irq->vector); + napi_schedule(&txr->bnapi->napi); } } #endif From c891d9f6bf2a78c9c657656872a60807820db4c8 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 23 Jun 2017 15:08:38 -0700 Subject: [PATCH 0989/1065] mm, thp: remove cond_resched from __collapse_huge_page_copy This is a partial revert of commit 338a16ba1549 ("mm, thp: copying user pages must schedule on collapse") which added a cond_resched() to __collapse_huge_page_copy(). On x86 with CONFIG_HIGHPTE, __collapse_huge_page_copy is called in atomic context and thus scheduling is not possible. This is only a possible config on arm and i386. Although need_resched has been shown to be set for over 100 jiffies while doing the iteration in __collapse_huge_page_copy, this is better than doing if (in_atomic()) cond_resched() to cover only non-CONFIG_HIGHPTE configs. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706191341550.97821@chino.kir.corp.google.com Signed-off-by: David Rientjes Reported-by: Larry Finger Tested-by: Larry Finger Acked-by: Michal Hocko Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/khugepaged.c | 1 - 1 file changed, 1 deletion(-) diff --git a/mm/khugepaged.c b/mm/khugepaged.c index 945fd1ca49b5..df4ebdb2b10a 100644 --- a/mm/khugepaged.c +++ b/mm/khugepaged.c @@ -652,7 +652,6 @@ static void __collapse_huge_page_copy(pte_t *pte, struct page *page, spin_unlock(ptl); free_page_and_swap_cache(src_page); } - cond_resched(); } } From 029c54b09599573015a5c18dbe59cbdf42742237 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Fri, 23 Jun 2017 15:08:41 -0700 Subject: [PATCH 0990/1065] mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings Existing code that uses vmalloc_to_page() may assume that any address for which is_vmalloc_addr() returns true may be passed into vmalloc_to_page() to retrieve the associated struct page. This is not un unreasonable assumption to make, but on architectures that have CONFIG_HAVE_ARCH_HUGE_VMAP=y, it no longer holds, and we need to ensure that vmalloc_to_page() does not go off into the weeds trying to dereference huge PUDs or PMDs as table entries. Given that vmalloc() and vmap() themselves never create huge mappings or deal with compound pages at all, there is no correct answer in this case, so return NULL instead, and issue a warning. When reading /proc/kcore on arm64, you will hit an oops as soon as you hit the huge mappings used for the various segments that make up the mapping of vmlinux. With this patch applied, you will no longer hit the oops, but the kcore contents willl be incorrect (these regions will be zeroed out) We are fixing this for kcore specifically, so it avoids vread() for those regions. At least one other problematic user exists, i.e., /dev/kmem, but that is currently broken on arm64 for other reasons. Link: http://lkml.kernel.org/r/20170609082226.26152-1-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel Acked-by: Mark Rutland Reviewed-by: Laura Abbott Cc: Michal Hocko Cc: zhong jiang Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 34a1c3e46ed7..ecc97f74ab18 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -287,10 +287,21 @@ struct page *vmalloc_to_page(const void *vmalloc_addr) if (p4d_none(*p4d)) return NULL; pud = pud_offset(p4d, addr); - if (pud_none(*pud)) + + /* + * Don't dereference bad PUD or PMD (below) entries. This will also + * identify huge mappings, which we may encounter on architectures + * that define CONFIG_HAVE_ARCH_HUGE_VMAP=y. Such regions will be + * identified as vmalloc addresses by is_vmalloc_addr(), but are + * not [unambiguously] associated with a struct page, so there is + * no correct value to return for them. + */ + WARN_ON_ONCE(pud_bad(*pud)); + if (pud_none(*pud) || pud_bad(*pud)) return NULL; pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd)) + WARN_ON_ONCE(pmd_bad(*pmd)); + if (pmd_none(*pmd) || pmd_bad(*pmd)) return NULL; ptep = pte_offset_map(pmd, addr); From 9fa4eb8e490a28de40964b1b0e583d8db4c7e57c Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 23 Jun 2017 15:08:43 -0700 Subject: [PATCH 0991/1065] autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl, autofs4_d_automount() will return ERR_PTR(status) with that status to follow_automount(), which will then dereference an invalid pointer. So treat a positive status the same as zero, and map to ENOENT. See comment in systemd src/core/automount.c::automount_send_ready(). Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown Cc: Ian Kent Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/autofs4/dev-ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 734cbf8d9676..dd9f1bebb5a3 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -344,7 +344,7 @@ static int autofs_dev_ioctl_fail(struct file *fp, int status; token = (autofs_wqt_t) param->fail.token; - status = param->fail.status ? param->fail.status : -ENOENT; + status = param->fail.status < 0 ? param->fail.status : -ENOENT; return autofs4_wait_release(sbi, token, status); } From 1eb643d02b21412e603b42cdd96010a2ac31c05f Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 23 Jun 2017 15:08:46 -0700 Subject: [PATCH 0992/1065] fs/dax.c: fix inefficiency in dax_writeback_mapping_range() dax_writeback_mapping_range() fails to update iteration index when searching radix tree for entries needing cache flushing. Thus each pagevec worth of entries is searched starting from the start which is inefficient and prone to livelocks. Update index properly. Link: http://lkml.kernel.org/r/20170619124531.21491-1-jack@suse.cz Fixes: 9973c98ecfda3 ("dax: add support for fsync/sync") Signed-off-by: Jan Kara Reviewed-by: Ross Zwisler Cc: Dan Williams Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/dax.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/dax.c b/fs/dax.c index 2a6889b3585f..9187f3b07f3e 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -859,6 +859,7 @@ int dax_writeback_mapping_range(struct address_space *mapping, if (ret < 0) goto out; } + start_index = indices[pvec.nr - 1] + 1; } out: put_dax(dax_dev); From a91e0f680bcd9e10c253ae8b62462a38bd48f09f Mon Sep 17 00:00:00 2001 From: Ilya Matveychikov Date: Fri, 23 Jun 2017 15:08:49 -0700 Subject: [PATCH 0993/1065] lib/cmdline.c: fix get_options() overflow while parsing ranges When using get_options() it's possible to specify a range of numbers, like 1-100500. The problem is that it doesn't track array size while calling internally to get_range() which iterates over the range and fills the memory with numbers. Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com Signed-off-by: Ilya V. Matveychikov Cc: Jonathan Corbet Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/cmdline.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/cmdline.c b/lib/cmdline.c index 3c6432df7e63..4c0888c4a68d 100644 --- a/lib/cmdline.c +++ b/lib/cmdline.c @@ -23,14 +23,14 @@ * the values[M, M+1, ..., N] into the ints array in get_options. */ -static int get_range(char **str, int *pint) +static int get_range(char **str, int *pint, int n) { int x, inc_counter, upper_range; (*str)++; upper_range = simple_strtol((*str), NULL, 0); inc_counter = upper_range - *pint; - for (x = *pint; x < upper_range; x++) + for (x = *pint; n && x < upper_range; x++, n--) *pint++ = x; return inc_counter; } @@ -97,7 +97,7 @@ char *get_options(const char *str, int nints, int *ints) break; if (res == 3) { int range_nums; - range_nums = get_range((char **)&str, ints + i); + range_nums = get_range((char **)&str, ints + i, nints - i); if (range_nums < 0) break; /* From 3b7b314053d021601940c50b07f5f1423ae67e21 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 23 Jun 2017 15:08:52 -0700 Subject: [PATCH 0994/1065] slub: make sysfs file removal asynchronous Commit bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") made slub sysfs file removals synchronous to kmem_cache shutdown. Unfortunately, this created a possible ABBA deadlock between slab_mutex and sysfs draining mechanism triggering the following lockdep warning. ====================================================== [ INFO: possible circular locking dependency detected ] 4.10.0-test+ #48 Not tainted ------------------------------------------------------- rmmod/1211 is trying to acquire lock: (s_active#120){++++.+}, at: [] kernfs_remove+0x23/0x40 but task is already holding lock: (slab_mutex){+.+.+.}, at: [] kmem_cache_destroy+0x41/0x2d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slab_mutex){+.+.+.}: lock_acquire+0xf6/0x1f0 __mutex_lock+0x75/0x950 mutex_lock_nested+0x1b/0x20 slab_attr_store+0x75/0xd0 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x13c/0x1c0 __vfs_write+0x28/0x120 vfs_write+0xc8/0x1e0 SyS_write+0x49/0xa0 entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #0 (s_active#120){++++.+}: __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(s_active#120); lock(slab_mutex); lock(s_active#120); *** DEADLOCK *** 2 locks held by rmmod/1211: #0: (cpu_hotplug.dep_map){++++++}, at: [] get_online_cpus+0x37/0x80 #1: (slab_mutex){+.+.+.}, at: [] kmem_cache_destroy+0x41/0x2d0 stack backtrace: CPU: 3 PID: 1211 Comm: rmmod Not tainted 4.10.0-test+ #48 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 Call Trace: print_circular_bug+0x1be/0x210 __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 ? SyS_delete_module+0x5/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 It'd be the cleanest to deal with the issue by removing sysfs files without holding slab_mutex before the rest of shutdown; however, given the current code structure, it is pretty difficult to do so. This patch punts sysfs file removal to a work item. Before commit bf5eb3de3847, the removal was punted to a RCU delayed work item which is executed after release. Now, we're punting to a different work item on shutdown which still maintains the goal removing the sysfs files earlier when destroying kmem_caches. Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org Fixes: bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") Signed-off-by: Tejun Heo Reported-by: Steven Rostedt (VMware) Tested-by: Steven Rostedt (VMware) Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slub_def.h | 1 + mm/slub.c | 40 ++++++++++++++++++++++++++-------------- 2 files changed, 27 insertions(+), 14 deletions(-) diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 07ef550c6627..93315d6b21a8 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -84,6 +84,7 @@ struct kmem_cache { int red_left_pad; /* Left redzone padding size */ #ifdef CONFIG_SYSFS struct kobject kobj; /* For sysfs */ + struct work_struct kobj_remove_work; #endif #ifdef CONFIG_MEMCG struct memcg_cache_params memcg_params; diff --git a/mm/slub.c b/mm/slub.c index 7449593fca72..8addc535bcdc 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5625,6 +5625,28 @@ static char *create_unique_id(struct kmem_cache *s) return name; } +static void sysfs_slab_remove_workfn(struct work_struct *work) +{ + struct kmem_cache *s = + container_of(work, struct kmem_cache, kobj_remove_work); + + if (!s->kobj.state_in_sysfs) + /* + * For a memcg cache, this may be called during + * deactivation and again on shutdown. Remove only once. + * A cache is never shut down before deactivation is + * complete, so no need to worry about synchronization. + */ + return; + +#ifdef CONFIG_MEMCG + kset_unregister(s->memcg_kset); +#endif + kobject_uevent(&s->kobj, KOBJ_REMOVE); + kobject_del(&s->kobj); + kobject_put(&s->kobj); +} + static int sysfs_slab_add(struct kmem_cache *s) { int err; @@ -5632,6 +5654,8 @@ static int sysfs_slab_add(struct kmem_cache *s) struct kset *kset = cache_kset(s); int unmergeable = slab_unmergeable(s); + INIT_WORK(&s->kobj_remove_work, sysfs_slab_remove_workfn); + if (!kset) { kobject_init(&s->kobj, &slab_ktype); return 0; @@ -5695,20 +5719,8 @@ static void sysfs_slab_remove(struct kmem_cache *s) */ return; - if (!s->kobj.state_in_sysfs) - /* - * For a memcg cache, this may be called during - * deactivation and again on shutdown. Remove only once. - * A cache is never shut down before deactivation is - * complete, so no need to worry about synchronization. - */ - return; - -#ifdef CONFIG_MEMCG - kset_unregister(s->memcg_kset); -#endif - kobject_uevent(&s->kobj, KOBJ_REMOVE); - kobject_del(&s->kobj); + kobject_get(&s->kobj); + schedule_work(&s->kobj_remove_work); } void sysfs_slab_release(struct kmem_cache *s) From 8818efaaacb78c60a9d90c5705b6c99b75d7d442 Mon Sep 17 00:00:00 2001 From: Eric Ren Date: Fri, 23 Jun 2017 15:08:55 -0700 Subject: [PATCH 0995/1065] ocfs2: fix deadlock caused by recursive locking in xattr Another deadlock path caused by recursive locking is reported. This kind of issue was introduced since commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()"). Two deadlock paths have been fixed by commit b891fa5024a9 ("ocfs2: fix deadlock issue when taking inode lock at vfs entry points"). Yes, we intend to fix this kind of case in incremental way, because it's hard to find out all possible paths at once. This one can be reproduced like this. On node1, cp a large file from home directory to ocfs2 mountpoint. While on node2, run setfacl/getfacl. Both nodes will hang up there. The backtraces: On node1: __ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2] ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2] ocfs2_write_begin+0x43/0x1a0 [ocfs2] generic_perform_write+0xa9/0x180 __generic_file_write_iter+0x1aa/0x1d0 ocfs2_file_write_iter+0x4f4/0xb40 [ocfs2] __vfs_write+0xc3/0x130 vfs_write+0xb1/0x1a0 SyS_write+0x46/0xa0 On node2: __ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2] ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2] ocfs2_xattr_set+0x12e/0xe80 [ocfs2] ocfs2_set_acl+0x22d/0x260 [ocfs2] ocfs2_iop_set_acl+0x65/0xb0 [ocfs2] set_posix_acl+0x75/0xb0 posix_acl_xattr_set+0x49/0xa0 __vfs_setxattr+0x69/0x80 __vfs_setxattr_noperm+0x72/0x1a0 vfs_setxattr+0xa7/0xb0 setxattr+0x12d/0x190 path_setxattr+0x9f/0xb0 SyS_setxattr+0x14/0x20 Fix this one by using ocfs2_inode_{lock|unlock}_tracker, which is exported by commit 439a36b8ef38 ("ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock"). Link: http://lkml.kernel.org/r/20170622014746.5815-1-zren@suse.com Fixes: 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") Signed-off-by: Eric Ren Reported-by: Thomas Voegtle Tested-by: Thomas Voegtle Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/dlmglue.c | 4 ++++ fs/ocfs2/xattr.c | 23 +++++++++++++---------- 2 files changed, 17 insertions(+), 10 deletions(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 3b7c937a36b5..4689940a953c 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -2591,6 +2591,10 @@ void ocfs2_inode_unlock_tracker(struct inode *inode, struct ocfs2_lock_res *lockres; lockres = &OCFS2_I(inode)->ip_inode_lockres; + /* had_lock means that the currect process already takes the cluster + * lock previously. If had_lock is 1, we have nothing to do here, and + * it will get unlocked where we got the lock. + */ if (!had_lock) { ocfs2_remove_holder(lockres, oh); ocfs2_inode_unlock(inode, ex); diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 3c5384d9b3a5..f70c3778d600 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -1328,20 +1328,21 @@ static int ocfs2_xattr_get(struct inode *inode, void *buffer, size_t buffer_size) { - int ret; + int ret, had_lock; struct buffer_head *di_bh = NULL; + struct ocfs2_lock_holder oh; - ret = ocfs2_inode_lock(inode, &di_bh, 0); - if (ret < 0) { - mlog_errno(ret); - return ret; + had_lock = ocfs2_inode_lock_tracker(inode, &di_bh, 0, &oh); + if (had_lock < 0) { + mlog_errno(had_lock); + return had_lock; } down_read(&OCFS2_I(inode)->ip_xattr_sem); ret = ocfs2_xattr_get_nolock(inode, di_bh, name_index, name, buffer, buffer_size); up_read(&OCFS2_I(inode)->ip_xattr_sem); - ocfs2_inode_unlock(inode, 0); + ocfs2_inode_unlock_tracker(inode, 0, &oh, had_lock); brelse(di_bh); @@ -3537,11 +3538,12 @@ int ocfs2_xattr_set(struct inode *inode, { struct buffer_head *di_bh = NULL; struct ocfs2_dinode *di; - int ret, credits, ref_meta = 0, ref_credits = 0; + int ret, credits, had_lock, ref_meta = 0, ref_credits = 0; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); struct inode *tl_inode = osb->osb_tl_inode; struct ocfs2_xattr_set_ctxt ctxt = { NULL, NULL, NULL, }; struct ocfs2_refcount_tree *ref_tree = NULL; + struct ocfs2_lock_holder oh; struct ocfs2_xattr_info xi = { .xi_name_index = name_index, @@ -3572,8 +3574,9 @@ int ocfs2_xattr_set(struct inode *inode, return -ENOMEM; } - ret = ocfs2_inode_lock(inode, &di_bh, 1); - if (ret < 0) { + had_lock = ocfs2_inode_lock_tracker(inode, &di_bh, 1, &oh); + if (had_lock < 0) { + ret = had_lock; mlog_errno(ret); goto cleanup_nolock; } @@ -3670,7 +3673,7 @@ cleanup: if (ret) mlog_errno(ret); } - ocfs2_inode_unlock(inode, 1); + ocfs2_inode_unlock_tracker(inode, 1, &oh, had_lock); cleanup_nolock: brelse(di_bh); brelse(xbs.xattr_bh); From 98da7d08850fb8bdeb395d6368ed15753304aa0c Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 23 Jun 2017 15:08:57 -0700 Subject: [PATCH 0996/1065] fs/exec.c: account for argv/envp pointers When limiting the argv/envp strings during exec to 1/4 of the stack limit, the storage of the pointers to the strings was not included. This means that an exec with huge numbers of tiny strings could eat 1/4 of the stack limit in strings and then additional space would be later used by the pointers to the strings. For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721 single-byte strings would consume less than 2MB of stack, the max (8MB / 4) amount allowed, but the pointers to the strings would consume the remaining additional stack space (1677721 * 4 == 6710884). The result (1677721 + 6710884 == 8388605) would exhaust stack space entirely. Controlling this stack exhaustion could result in pathological behavior in setuid binaries (CVE-2017-1000365). [akpm@linux-foundation.org: additional commenting from Kees] Fixes: b6a2fea39318 ("mm: variable length argument support") Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast Signed-off-by: Kees Cook Acked-by: Rik van Riel Acked-by: Michal Hocko Cc: Alexander Viro Cc: Qualys Security Advisory Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 72934df68471..904199086490 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -220,8 +220,26 @@ static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, if (write) { unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start; + unsigned long ptr_size; struct rlimit *rlim; + /* + * Since the stack will hold pointers to the strings, we + * must account for them as well. + * + * The size calculation is the entire vma while each arg page is + * built, so each time we get here it's calculating how far it + * is currently (rather than each call being just the newly + * added size from the arg page). As a result, we need to + * always add the entire size of the pointers, so that on the + * last call to get_arg_page() we'll actually have the entire + * correct size. + */ + ptr_size = (bprm->argc + bprm->envc) * sizeof(void *); + if (ptr_size > ULONG_MAX - size) + goto fail; + size += ptr_size; + acct_arg_size(bprm, size / PAGE_SIZE); /* @@ -239,13 +257,15 @@ static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, * to work from. */ rlim = current->signal->rlim; - if (size > ACCESS_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4) { - put_page(page); - return NULL; - } + if (size > READ_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4) + goto fail; } return page; + +fail: + put_page(page); + return NULL; } static void put_arg_page(struct page *page) From 26fcd952d5c977a94ac64bb44ed409e37607b2c9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 23 Jun 2017 10:50:38 +0200 Subject: [PATCH 0997/1065] x86/mshyperv: Remove excess #includes from mshyperv.h A recent commit included linux/slab.h in linux/irq.h. This breaks the build of vdso32 on a 64-bit kernel. The reason is that linux/irq.h gets included into the vdso code via linux/interrupt.h which is included from asm/mshyperv.h. That makes the 32-bit vdso compile fail, because slab.h includes the pgtable headers for 64-bit on a 64-bit build. Neither linux/clocksource.h nor linux/interrupt.h are needed in the mshyperv.h header file itself - it has a dependency on . Remove the includes and unbreak the build. Reported-by: Ingo Molnar Signed-off-by: Thomas Gleixner Cc: K. Y. Srinivasan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Vitaly Kuznetsov Cc: devel@linuxdriverproject.org Fixes: dee863b571b0 ("hv: export current Hyper-V clocksource") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mshyperv.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index fba100713924..d5acc27ed1cc 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -2,8 +2,7 @@ #define _ASM_X86_MSHYPER_H #include -#include -#include +#include #include /* From d0c32a16235aeacd32c9de6ff90f9219614d7e4e Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Sat, 24 Jun 2017 15:37:00 +0300 Subject: [PATCH 0998/1065] bnx2x: Don't log mc removal needlessly When mc configuration changes bnx2x_config_mcast() can return 0 for success, negative for failure and positive for benign reason preventing its immediate work, e.g., when the command awaits the completion of a previously sent command. When removing all configured macs on a 578xx adapter, if a positive value would be returned driver would errneously log it as an error. Fixes: c7b7b483ccc9 ("bnx2x: Don't flush multicast MACs") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index a851f95c307a..349a46593abf 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12729,7 +12729,7 @@ static int bnx2x_set_mc_list(struct bnx2x *bp) } else { /* If no mc addresses are required, flush the configuration */ rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); - if (rc) + if (rc < 0) BNX2X_ERR("Failed to clear multicast configuration %d\n", rc); } From 85cb73ff9b74785a7fc752875d7f0fe17ca3ea7c Mon Sep 17 00:00:00 2001 From: Wei Wang Date: Fri, 23 Jun 2017 15:25:37 -0700 Subject: [PATCH 0999/1065] net: ipv6: reset daddr and dport in sk if connect() fails MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In __ip6_datagram_connect(), reset sk->sk_v6_daddr and inet->dport if error occurs. In udp_v6_early_demux(), check for sk_state to make sure it is in TCP_ESTABLISHED state. Together, it makes sure unconnected UDP socket won't be considered as a valid candidate for early demux. v3: add TCP_ESTABLISHED state check in udp_v6_early_demux() v2: fix compilation error Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by: Wei Wang Acked-by: Maciej Żenczykowski Signed-off-by: David S. Miller --- net/ipv6/datagram.c | 8 +++++++- net/ipv6/udp.c | 3 ++- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index e011122ebd43..5c786f5ab961 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -250,8 +250,14 @@ ipv4_connected: */ err = ip6_datagram_dst_update(sk, true); - if (err) + if (err) { + /* Reset daddr and dport so that udp_v6_early_demux() + * fails to find this socket + */ + memset(&sk->sk_v6_daddr, 0, sizeof(sk->sk_v6_daddr)); + inet->inet_dport = 0; goto out; + } sk->sk_state = TCP_ESTABLISHED; sk_set_txhash(sk); diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 06ec39b79609..75703fda23e7 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -879,7 +879,8 @@ static struct sock *__udp6_lib_demux_lookup(struct net *net, struct sock *sk; udp_portaddr_for_each_entry_rcu(sk, &hslot2->head) { - if (INET6_MATCH(sk, net, rmt_addr, loc_addr, ports, dif)) + if (sk->sk_state == TCP_ESTABLISHED && + INET6_MATCH(sk, net, rmt_addr, loc_addr, ports, dif)) return sk; /* Only check first socket in chain */ break; From d747a7a51b00984127a88113cdbbc26f91e9d815 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Sat, 24 Jun 2017 23:50:30 -0700 Subject: [PATCH 1000/1065] tcp: reset sk_rx_dst in tcp_disconnect() We have to reset the sk->sk_rx_dst when we disconnect a TCP connection, because otherwise when we re-connect it this dst reference is simply overridden in tcp_finish_connect(). This fixes a dst leak which leads to a loopback dev refcnt leak. It is a long-standing bug, Kevin reported a very similar (if not same) bug before. Thanks to Andrei for providing such a reliable reproducer which greatly narrows down the problem. Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.") Reported-by: Andrei Vagin Reported-by: Kevin Xu Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index b5ea036ca781..40aca7803cf2 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2330,6 +2330,8 @@ int tcp_disconnect(struct sock *sk, int flags) tcp_init_send_head(sk); memset(&tp->rx_opt, 0, sizeof(tp->rx_opt)); __sk_dst_reset(sk); + dst_release(sk->sk_rx_dst); + sk->sk_rx_dst = NULL; tcp_saved_syn_free(tp); /* Clean up fastopen related fields */ From c0bc126f97fb929b3ae02c1c62322645d70eb408 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 25 Jun 2017 18:30:05 -0700 Subject: [PATCH 1001/1065] Linux 4.12-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 57df7569c1bf..6d8a984ed9c9 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 12 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Fearless Coyote # *DOCUMENTATION* From d8462d0ad350ccd399899de051060ee562a5e537 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 20 Jun 2017 13:43:19 +0100 Subject: [PATCH 1002/1065] drm/i915: Retire the VMA's fence tracker before unbinding Since we may track unfenced access (GPU access to the vma that explicitly requires no fence), vma->last_fence may be set without any attached fence (vma->fence) and so will not be flushed when we call i915_vma_put_fence(). Since we stopped doing a full retire of the activity trackers for unbind, we need to explicitly retire each tracker. Fixes: b0decaf75bd9 ("drm/i915: Track active vma requests") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/20170620124321.1108-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin (cherry picked from commit 760a898d8069111704e1bd43f00ebf369ae46e57) Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_vma.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_vma.c b/drivers/gpu/drm/i915/i915_vma.c index 1aba47024656..f066e2d785f5 100644 --- a/drivers/gpu/drm/i915/i915_vma.c +++ b/drivers/gpu/drm/i915/i915_vma.c @@ -650,6 +650,11 @@ int i915_vma_unbind(struct i915_vma *vma) break; } + if (!ret) { + ret = i915_gem_active_retire(&vma->last_fence, + &vma->vm->i915->drm.struct_mutex); + } + __i915_vma_unpin(vma); if (ret) return ret; From 2c7367626733e27d6f6d9906db7a31ada587566b Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 17 Jun 2017 12:57:44 +0100 Subject: [PATCH 1003/1065] drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object As we walk the obj->vma_list in per_file_stats(), we need to hold struct_mutex to prevent alteration of that list. Fixes: 1d2ac403ae3b ("drm: Protect dev->filelist with its own mutex") Fixes: c84455b4bacc ("drm/i915: Move debug only per-request pid tracking from request to ctx") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101460 Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/20170617115744.4452-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin (cherry picked from commit 0caf81b5c53d9bd332a95dbcb44db8de0b397a7c) Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index d689e511744e..4bd1467c17b1 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -292,6 +292,8 @@ static int per_file_stats(int id, void *ptr, void *data) struct file_stats *stats = data; struct i915_vma *vma; + lockdep_assert_held(&obj->base.dev->struct_mutex); + stats->count++; stats->total += obj->base.size; if (!obj->bind_count) @@ -476,6 +478,8 @@ static int i915_gem_object_info(struct seq_file *m, void *data) struct drm_i915_gem_request *request; struct task_struct *task; + mutex_lock(&dev->struct_mutex); + memset(&stats, 0, sizeof(stats)); stats.file_priv = file->driver_priv; spin_lock(&file->table_lock); @@ -487,7 +491,6 @@ static int i915_gem_object_info(struct seq_file *m, void *data) * still alive (e.g. get_pid(current) => fork() => exit()). * Therefore, we need to protect this ->comm access using RCU. */ - mutex_lock(&dev->struct_mutex); request = list_first_entry_or_null(&file_priv->mm.request_list, struct drm_i915_gem_request, client_link); @@ -497,6 +500,7 @@ static int i915_gem_object_info(struct seq_file *m, void *data) PIDTYPE_PID); print_file_stats(m, task ? task->comm : "", stats); rcu_read_unlock(); + mutex_unlock(&dev->struct_mutex); } mutex_unlock(&dev->filelist_mutex); From 611cdf3695a307fdca3ff3779a1e6cca935e2d31 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 16 Jun 2017 15:05:18 +0100 Subject: [PATCH 1004/1065] drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations If we write a relocation into the buffer, we require our own implicit synchronisation added after the start of the execbuf, outside of the user's control. As we may end up clflushing, or doing the patch itself on the GPU, asynchronously we need to look at the implicit serialisation on obj->resv and hence need to disable EXEC_OBJECT_ASYNC for this object. If the user does trigger a stall for relocations, we make sure the stall is complete enough so that the batch is not submitted before we complete those relocations. Fixes: 77ae9957897d ("drm/i915: Enable userspace to opt-out of implicit fencing") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Jason Ekstrand Reviewed-by: Joonas Lahtinen (cherry picked from commit 071750e550af46b5d3a84ad56c2a108c3e136284) [danvet: Resolve conflicts, resolution reviewed by Tvrtko on irc.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index a3e59c8ef27b..9ad13eeed904 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -546,11 +546,12 @@ repeat: } static int -i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, +i915_gem_execbuffer_relocate_entry(struct i915_vma *vma, struct eb_vmas *eb, struct drm_i915_gem_relocation_entry *reloc, struct reloc_cache *cache) { + struct drm_i915_gem_object *obj = vma->obj; struct drm_i915_private *dev_priv = to_i915(obj->base.dev); struct drm_gem_object *target_obj; struct drm_i915_gem_object *target_i915_obj; @@ -628,6 +629,16 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, return -EINVAL; } + /* + * If we write into the object, we need to force the synchronisation + * barrier, either with an asynchronous clflush or if we executed the + * patching using the GPU (though that should be serialised by the + * timeline). To be completely sure, and since we are required to + * do relocations we are already stalling, disable the user's opt + * of our synchronisation. + */ + vma->exec_entry->flags &= ~EXEC_OBJECT_ASYNC; + ret = relocate_entry(obj, reloc, cache, target_offset); if (ret) return ret; @@ -678,7 +689,7 @@ i915_gem_execbuffer_relocate_vma(struct i915_vma *vma, do { u64 offset = r->presumed_offset; - ret = i915_gem_execbuffer_relocate_entry(vma->obj, eb, r, &cache); + ret = i915_gem_execbuffer_relocate_entry(vma, eb, r, &cache); if (ret) goto out; @@ -726,7 +737,7 @@ i915_gem_execbuffer_relocate_vma_slow(struct i915_vma *vma, reloc_cache_init(&cache, eb->i915); for (i = 0; i < entry->relocation_count; i++) { - ret = i915_gem_execbuffer_relocate_entry(vma->obj, eb, &relocs[i], &cache); + ret = i915_gem_execbuffer_relocate_entry(vma, eb, &relocs[i], &cache); if (ret) break; } From 98fe3633c5a44e5ee3d642907739eb0210407886 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=B4me=20Glisse?= Date: Sat, 24 Jun 2017 14:05:14 -0400 Subject: [PATCH 1005/1065] x86/mm/hotplug: Fix BUG_ON() after hot-remove by not freeing PUD MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit: af2cf278ef4f ("x86/mm/hotplug: Don't remove PGD entries in remove_pagetable()") we no longer free PUDs so that we do not have to synchronize all PGDs on hot-remove/vfree(). But the new 5-level page table patchset reverted that for 4-level page tables, in the following commit: f2a6a7050109: ("x86: Convert the rest of the code to support p4d_t") This patch restores the damage and disables free_pud() if we are in the 4-level page table case, thus avoiding BUG_ON() after hot-remove. Signed-off-by: Jérôme Glisse [ Clarified the changelog and the code comments. ] Reviewed-by: Kirill A. Shutemov Cc: Andrew Morton Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Logan Gunthorpe Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170624180514.3821-1-jglisse@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/mm/init_64.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 95651dc58e09..0a59daf799f8 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -990,7 +990,13 @@ remove_p4d_table(p4d_t *p4d_start, unsigned long addr, unsigned long end, pud_base = pud_offset(p4d, 0); remove_pud_table(pud_base, addr, next, direct); - free_pud_table(pud_base, p4d); + /* + * For 4-level page tables we do not want to free PUDs, but in the + * 5-level case we should free them. This code will have to change + * to adapt for boot-time switching between 4 and 5 level page tables. + */ + if (CONFIG_PGTABLE_LEVELS == 5) + free_pud_table(pud_base, p4d); } if (direct) From 82fcee526ba8ca2c5d378bdf51b21b7eb058fe3a Mon Sep 17 00:00:00 2001 From: Deepak Rawat Date: Mon, 26 Jun 2017 14:39:08 +0200 Subject: [PATCH 1006/1065] drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr The hash table created during vmw_cmdbuf_res_man_create was never freed. This causes memory leak in context creation. Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy. Tested for memory leak by running piglit overnight and kernel memory is not inflated which earlier was. Cc: Signed-off-by: Deepak Rawat Reviewed-by: Sinclair Yeh Signed-off-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c b/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c index 13db8a2851ed..1f013d45c9e9 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c @@ -321,6 +321,7 @@ void vmw_cmdbuf_res_man_destroy(struct vmw_cmdbuf_res_manager *man) list_for_each_entry_safe(entry, next, &man->list, head) vmw_cmdbuf_res_free(man, entry); + drm_ht_remove(&man->resources); kfree(man); } From d6bd8194e2867e85ac2de63486d3b83ccfae4e62 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 26 Jun 2017 11:30:57 +1000 Subject: [PATCH 1007/1065] powerpc/32: Avoid miscompilation w/GCC 4.6.3 - don't inline copy_to/from_user() Larry Finger reported that his Powerbook G4 was no longer booting with v4.12-rc, userspace was up but giving weird errors such as: udevd[64]: starting version 175 udevd[64]: Unable to receive ctrl message: Bad address. modprobe: chdir(4.12-rc1): No such file or directory He bisected the problem to commit 3448890c32c3 ("powerpc: get rid of zeroing, switch to RAW_COPY_USER"). Al identified that the problem is actually a miscompilation by GCC 4.6.3, which is exposed by the above commit. Al also pointed out that inlining copy_to/from_user() is probably of little or no benefit, which is correct. Using Anton's copy_to_user benchmark, with a pathological single byte copy, we see a small increase in performance by *removing* inlining: Before (inlined): # time ./copy_to_user -w -l 1 -i 10000000 ( x 3 ) real 0m22.063s real 0m22.059s real 0m22.076s After: # time ./copy_to_user -w -l 1 -i 10000000 ( x 3 ) real 0m21.325s real 0m21.299s real 0m21.364s So as a small performance improvement and to avoid the miscompilation, drop inlining copy_to/from_user() on 32-bit. Fixes: 3448890c32c3 ("powerpc: get rid of zeroing, switch to RAW_COPY_USER") Reported-by: Larry Finger Suggested-by: Al Viro Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/uaccess.h | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h index 5c0d8a8cdae5..41e88d3ce36b 100644 --- a/arch/powerpc/include/asm/uaccess.h +++ b/arch/powerpc/include/asm/uaccess.h @@ -267,13 +267,7 @@ do { \ extern unsigned long __copy_tofrom_user(void __user *to, const void __user *from, unsigned long size); -#ifndef __powerpc64__ - -#define INLINE_COPY_FROM_USER -#define INLINE_COPY_TO_USER - -#else /* __powerpc64__ */ - +#ifdef __powerpc64__ static inline unsigned long raw_copy_in_user(void __user *to, const void __user *from, unsigned long n) { From 3f938ee2f6c4fff8d95b24636a0964b5a93cf547 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 26 Jun 2017 11:51:53 +0200 Subject: [PATCH 1008/1065] perf machine: Fix segfault for kernel.kptr_restrict=2 Michael reported the segfault when kernel.kptr_restrict=2 is set. $ perf record ls ... perf: Segmentation fault Obtained 16 stack frames. ./perf(dump_stack+0x2d) [0x5068df] ./perf(sighandler_dump_stack+0x2d) [0x5069bf] ./perf() [0x43e47b] /lib64/libc.so.6(+0x3594f) [0x7f762004794f] /lib64/libc.so.6(strlen+0x26) [0x7f762009ef86] /lib64/libc.so.6(__strdup+0xd) [0x7f762009ecbd] ./perf(maps__set_kallsyms_ref_reloc_sym+0x4d) [0x51590f] ./perf(machine__create_kernel_maps+0x136) [0x50a7de] ./perf(perf_session__create_kernel_maps+0x2c) [0x510a81] ./perf(perf_session__new+0x13d) [0x510e23] ./perf() [0x43fd61] ./perf(cmd_record+0x704) [0x441823] ./perf() [0x4bc1a0] ./perf() [0x4bc40d] ./perf() [0x4bc55f] ./perf(main+0x2d5) [0x4bc939] Segmentation fault (core dumped) The reason is that with kernel.kptr_restrict=2, we don't get the symbol from machine__get_running_kernel_start, which we want to use in maps__set_kallsyms_ref_reloc_sym and we crash. Check the symbol name value before calling maps__set_kallsyms_ref_reloc_sym() and succeed without ref_reloc_sym being set. It's safe because we check its existence before we use it. Reported-by: Michael Petlan Signed-off-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20170626095153.553-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/machine.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c index d7f31cb0a4cb..5de2b86b9880 100644 --- a/tools/perf/util/machine.c +++ b/tools/perf/util/machine.c @@ -1209,10 +1209,12 @@ int machine__create_kernel_maps(struct machine *machine) */ map_groups__fixup_end(&machine->kmaps); - if (machine__get_running_kernel_start(machine, &name, &addr)) { - } else if (maps__set_kallsyms_ref_reloc_sym(machine->vmlinux_maps, name, addr)) { - machine__destroy_kernel_maps(machine); - return -1; + if (!machine__get_running_kernel_start(machine, &name, &addr)) { + if (name && + maps__set_kallsyms_ref_reloc_sym(machine->vmlinux_maps, name, addr)) { + machine__destroy_kernel_maps(machine); + return -1; + } } return 0; From 6f64ec74515925cced6df4571638b5a099a49aae Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 27 Jun 2017 07:02:20 -0700 Subject: [PATCH 1009/1065] net: prevent sign extension in dev_get_stats() Similar to the fix provided by Dominik Heidler in commit 9b3dc0a17d73 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats(). When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned. Fixes: caf586e5f23ce ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688f57ca ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d315a76 ("net: add rx_nohandler stat counter") Signed-off-by: Eric Dumazet Cc: Jarod Wilson Signed-off-by: David S. Miller --- net/core/dev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 7243421c9783..91bb55070533 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -7783,9 +7783,9 @@ struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev, } else { netdev_stats_to_stats64(storage, &dev->stats); } - storage->rx_dropped += atomic_long_read(&dev->rx_dropped); - storage->tx_dropped += atomic_long_read(&dev->tx_dropped); - storage->rx_nohandler += atomic_long_read(&dev->rx_nohandler); + storage->rx_dropped += (unsigned long)atomic_long_read(&dev->rx_dropped); + storage->tx_dropped += (unsigned long)atomic_long_read(&dev->tx_dropped); + storage->rx_nohandler += (unsigned long)atomic_long_read(&dev->rx_nohandler); return storage; } EXPORT_SYMBOL(dev_get_stats); From 00a0ea33b495ee6149bf5a77ac5807ce87323abb Mon Sep 17 00:00:00 2001 From: Vallish Vaidyeshwara Date: Fri, 23 Jun 2017 18:53:06 +0000 Subject: [PATCH 1010/1065] dm thin: do not queue freed thin mapping for next stage processing process_prepared_discard_passdown_pt1() should cleanup dm_thin_new_mapping in cases of error. dm_pool_inc_data_range() can fail trying to get a block reference: metadata operation 'dm_pool_inc_data_range' failed: error = -61 When dm_pool_inc_data_range() fails, dm thin aborts current metadata transaction and marks pool as PM_READ_ONLY. Memory for thin mapping is released as well. However, current thin mapping will be queued onto next stage as part of queue_passdown_pt2() or passdown_endio(). This dangling thin mapping memory when processed and accessed in next stage will lead to device mapper crashing. Code flow without fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> discard passdown --> passdown_endio(m) queues m onto next stage -> dm_pool_inc_data_range() fails, frees memory m but does not remove it from next stage queue -> process_prepared_discard_passdown_pt2(m) -> processes freed memory m and crashes One such stack: Call Trace: [] dm_cell_release_no_holder+0x2f/0x70 [dm_bio_prison] [] cell_defer_no_holder+0x3c/0x80 [dm_thin_pool] [] process_prepared_discard_passdown_pt2+0x4b/0x90 [dm_thin_pool] [] process_prepared+0x81/0xa0 [dm_thin_pool] [] do_worker+0xc5/0x820 [dm_thin_pool] [] ? __schedule+0x244/0x680 [] ? pwq_activate_delayed_work+0x42/0xb0 [] process_one_work+0x153/0x3f0 [] worker_thread+0x12b/0x4b0 [] ? rescuer_thread+0x350/0x350 [] kthread+0xca/0xe0 [] ? kthread_park+0x60/0x60 [] ret_from_fork+0x25/0x30 The fix is to first take the block ref count for discarded block and then do a passdown discard of this block. If block ref count fails, then bail out aborting current metadata transaction, mark pool as PM_READ_ONLY and also free current thin mapping memory (existing error handling code) without queueing this thin mapping onto next stage of processing. If block ref count succeeds, then passdown discard of this block. Discard callback of passdown_endio() will queue this thin mapping onto next stage of processing. Code flow with fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> dm_pool_inc_data_range() --> if fails, free memory m and bail out -> discard passdown --> passdown_endio(m) queues m onto next stage Cc: stable # v4.9+ Reviewed-by: Eduardo Valentin Reviewed-by: Cristian Gafton Reviewed-by: Anchal Agarwal Signed-off-by: Vallish Vaidyeshwara Reviewed-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-thin.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 17ad50daed08..28808e5ec0fd 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1094,6 +1094,19 @@ static void process_prepared_discard_passdown_pt1(struct dm_thin_new_mapping *m) return; } + /* + * Increment the unmapped blocks. This prevents a race between the + * passdown io and reallocation of freed blocks. + */ + r = dm_pool_inc_data_range(pool->pmd, m->data_block, data_end); + if (r) { + metadata_operation_failed(pool, "dm_pool_inc_data_range", r); + bio_io_error(m->bio); + cell_defer_no_holder(tc, m->cell); + mempool_free(m, pool->mapping_pool); + return; + } + discard_parent = bio_alloc(GFP_NOIO, 1); if (!discard_parent) { DMWARN("%s: unable to allocate top level discard bio for passdown. Skipping passdown.", @@ -1114,19 +1127,6 @@ static void process_prepared_discard_passdown_pt1(struct dm_thin_new_mapping *m) end_discard(&op, r); } } - - /* - * Increment the unmapped blocks. This prevents a race between the - * passdown io and reallocation of freed blocks. - */ - r = dm_pool_inc_data_range(pool->pmd, m->data_block, data_end); - if (r) { - metadata_operation_failed(pool, "dm_pool_inc_data_range", r); - bio_io_error(m->bio); - cell_defer_no_holder(tc, m->cell); - mempool_free(m, pool->mapping_pool); - return; - } } static void process_prepared_discard_passdown_pt2(struct dm_thin_new_mapping *m) From 85688d9adf68557233d974ef28971e69b89fb690 Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Mon, 26 Jun 2017 18:47:00 +0300 Subject: [PATCH 1011/1065] fsl/fman: add dependency on HAS_DMA A previous commit (5567e989198b5a8d) inserted a dependency on DMA API that requires HAS_DMA to be added in Kconfig. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fman/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/freescale/fman/Kconfig b/drivers/net/ethernet/freescale/fman/Kconfig index dc0850b3b517..8870a9a798ca 100644 --- a/drivers/net/ethernet/freescale/fman/Kconfig +++ b/drivers/net/ethernet/freescale/fman/Kconfig @@ -2,6 +2,7 @@ config FSL_FMAN tristate "FMan support" depends on FSL_SOC || ARCH_LAYERSCAPE || COMPILE_TEST select GENERIC_ALLOCATOR + depends on HAS_DMA select PHYLIB default n help From e20bd60bf62a2448be873653c7febca1d4d73afc Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Mon, 26 Jun 2017 12:41:20 -0500 Subject: [PATCH 1012/1065] net: usb: asix88179_178a: Add support for the Belkin B2B128 The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet chip supported by this driver, add the USB ID for the same. This patch is based on work by Geoffrey Tran who has indicated they would like this upstreamed by someone more familiar with the upstreaming process. Signed-off-by: Andrew F. Davis Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 51cf60092a18..4037ab27734a 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1722,6 +1722,18 @@ static const struct driver_info lenovo_info = { .tx_fixup = ax88179_tx_fixup, }; +static const struct driver_info belkin_info = { + .description = "Belkin USB Ethernet Adapter", + .bind = ax88179_bind, + .unbind = ax88179_unbind, + .status = ax88179_status, + .link_reset = ax88179_link_reset, + .reset = ax88179_reset, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = ax88179_rx_fixup, + .tx_fixup = ax88179_tx_fixup, +}; + static const struct usb_device_id products[] = { { /* ASIX AX88179 10/100/1000 */ @@ -1751,6 +1763,10 @@ static const struct usb_device_id products[] = { /* Lenovo OneLinkDock Gigabit LAN */ USB_DEVICE(0x17ef, 0x304b), .driver_info = (unsigned long)&lenovo_info, +}, { + /* Belkin B2B128 USB 3.0 Hub + Gigabit Ethernet Adapter */ + USB_DEVICE(0x050d, 0x0128), + .driver_info = (unsigned long)&belkin_info, }, { }, }; From 25d8b92e0af75d72ce8b99e63e5a449cc0888efa Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Tue, 27 Jun 2017 19:22:16 +0000 Subject: [PATCH 1013/1065] MIPS: head: Reorder instructions missing a delay slot In this sequence the 'move' is assumed in the delay slot of the 'beq', but head.S is in reorder mode and the former gets pushed one 'nop' farther by the assembler. The corrected behavior made booting with an UHI supplied dtb erratic. Fixes: 15f37e158892 ("MIPS: store the appended dtb address in a variable") Signed-off-by: Karl Beldan Reviewed-by: James Hogan Cc: Jonas Gorski Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16614/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/head.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index cf052204eb0a..d1bb506adc10 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -106,8 +106,8 @@ NESTED(kernel_entry, 16, sp) # kernel entry point beq t0, t1, dtb_found #endif li t1, -2 - beq a0, t1, dtb_found move t2, a1 + beq a0, t1, dtb_found li t2, 0 dtb_found: From ebef7368571d88f0f80b817e6898075c62265b4e Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 27 Jun 2017 17:44:05 -0600 Subject: [PATCH 1014/1065] nvme/pci: Fix stuck nvme reset The controller state is set to resetting prior to disabling the controller, so this patch accounts for that state when deciding if it needs to freeze the queues. Without this, an 'nvme reset /dev/nvme0' blocks forever because the queues were never frozen. Fixes: 82b057caefaf ("nvme-pci: fix multiple ctrl removal scheduling") Signed-off-by: Keith Busch Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/host/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 951042a375d6..40c7581caeb0 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1805,7 +1805,8 @@ static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown) if (pci_is_enabled(pdev)) { u32 csts = readl(dev->bar + NVME_REG_CSTS); - if (dev->ctrl.state == NVME_CTRL_LIVE) + if (dev->ctrl.state == NVME_CTRL_LIVE || + dev->ctrl.state == NVME_CTRL_RESETTING) nvme_start_freeze(&dev->ctrl); dead = !!((csts & NVME_CSTS_CFS) || !(csts & NVME_CSTS_RDY) || pdev->error_state != pci_channel_io_normal); From ddbfff7429a75d954bf5bdff9f2222bceb4c236a Mon Sep 17 00:00:00 2001 From: Aleksandar Markovic Date: Mon, 19 Jun 2017 17:50:12 +0200 Subject: [PATCH 1015/1065] MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately If accumulator value is zero, just return the value of previously calculated product. This brings logic in MADDF/MSUBF implementation closer to the logic in ADD/SUB case. Signed-off-by: Miodrag Dinic Signed-off-by: Goran Ferenc Signed-off-by: Aleksandar Markovic Cc: James.Hogan@imgtec.com Cc: Paul.Burton@imgtec.com Cc: Raghu.Gandham@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: Douglas.Leung@imgtec.com Cc: Petar.Jovanovic@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16512/ Signed-off-by: Ralf Baechle --- arch/mips/math-emu/dp_maddf.c | 5 ++++- arch/mips/math-emu/sp_maddf.c | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/mips/math-emu/dp_maddf.c b/arch/mips/math-emu/dp_maddf.c index 4a2d03c72959..caa62f20a888 100644 --- a/arch/mips/math-emu/dp_maddf.c +++ b/arch/mips/math-emu/dp_maddf.c @@ -54,7 +54,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x, return ieee754dp_nanxcpt(z); case IEEE754_CLASS_DNORM: DPDNORMZ; - /* QNAN is handled separately below */ + /* QNAN and ZERO cases are handled separately below */ } switch (CLPAIR(xc, yc)) { @@ -210,6 +210,9 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x, } assert(rm & (DP_HIDDEN_BIT << 3)); + if (zc == IEEE754_CLASS_ZERO) + return ieee754dp_format(rs, re, rm); + /* And now the addition */ assert(zm & DP_HIDDEN_BIT); diff --git a/arch/mips/math-emu/sp_maddf.c b/arch/mips/math-emu/sp_maddf.c index a8cd8b4f235e..c91d5e5d9b5f 100644 --- a/arch/mips/math-emu/sp_maddf.c +++ b/arch/mips/math-emu/sp_maddf.c @@ -54,7 +54,7 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x, return ieee754sp_nanxcpt(z); case IEEE754_CLASS_DNORM: SPDNORMZ; - /* QNAN is handled separately below */ + /* QNAN and ZERO cases are handled separately below */ } switch (CLPAIR(xc, yc)) { @@ -203,6 +203,9 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x, } assert(rm & (SP_HIDDEN_BIT << 3)); + if (zc == IEEE754_CLASS_ZERO) + return ieee754sp_format(rs, re, rm); + /* And now the addition */ assert(zm & SP_HIDDEN_BIT); From 898fc11bb2bd4fbcefb685872d9fffaba2c8edaf Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 21 Jun 2017 10:16:56 -0400 Subject: [PATCH 1016/1065] NFS: Trunking detection should handle ERESTARTSYS/EINTR Currently, it will return EIO in those cases. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index b34de036501b..cbf82b0d4467 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -2134,6 +2134,8 @@ again: put_rpccred(cred); switch (status) { case 0: + case -EINTR: + case -ERESTARTSYS: break; case -ETIMEDOUT: if (clnt->cl_softrtry) From bd171930e6a3de4f5cffdafbb944e50093dfb59b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 27 Jun 2017 17:33:38 -0400 Subject: [PATCH 1017/1065] NFSv4.1: Fix a race in nfs4_proc_layoutget If the task calling layoutget is signalled, then it is possible for the calls to nfs4_sequence_free_slot() and nfs4_layoutget_prepare() to race, in which case we leak a slot. The fix is to move the call to nfs4_sequence_free_slot() into the nfs4_layoutget_release() so that it gets called at task teardown time. Fixes: 2e80dbe7ac51 ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 4e43fd1270c4..dbfa18900e25 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -8417,6 +8417,7 @@ static void nfs4_layoutget_release(void *calldata) size_t max_pages = max_response_pages(server); dprintk("--> %s\n", __func__); + nfs4_sequence_free_slot(&lgp->res.seq_res); nfs4_free_pages(lgp->args.layout.pages, max_pages); pnfs_put_layout_hdr(NFS_I(inode)->layout); put_nfs_open_context(lgp->args.ctx); @@ -8491,7 +8492,6 @@ nfs4_proc_layoutget(struct nfs4_layoutget *lgp, long *timeout, gfp_t gfp_flags) /* if layoutp->len is 0, nfs4_layoutget_prepare called rpc_exit */ if (status == 0 && lgp->res.layoutp->len) lseg = pnfs_layout_process(lgp); - nfs4_sequence_free_slot(&lgp->res.seq_res); rpc_put_task(task); dprintk("<-- %s status=%d\n", __func__, status); if (status) From d9f2950006f110f54444a10442752372ee568289 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Fri, 16 Jun 2017 11:12:59 -0400 Subject: [PATCH 1018/1065] Revert "NFS: nfs_rename() handle -ERESTARTSYS dentry left behind" This reverts commit 920b4530fb80430ff30ef83efe21ba1fa5623731 which could call d_move() without holding the directory's i_mutex, and reverts commit d4ea7e3c5c0e341c15b073016dbf3ab6c65f12f3 "NFS: Fix old dentry rehash after move", which was a follow-up fix. Signed-off-by: Benjamin Coddington Fixes: 920b4530fb80 ("NFS: nfs_rename() handle -ERESTARTSYS dentry left behind") Cc: stable@vger.kernel.org # v4.10+ Reviewed-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 51 ++++++++++++++++++++++++--------------------------- 1 file changed, 24 insertions(+), 27 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 32ccd7754f8a..2ac00bf4ecf1 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1946,29 +1946,6 @@ nfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry) } EXPORT_SYMBOL_GPL(nfs_link); -static void -nfs_complete_rename(struct rpc_task *task, struct nfs_renamedata *data) -{ - struct dentry *old_dentry = data->old_dentry; - struct dentry *new_dentry = data->new_dentry; - struct inode *old_inode = d_inode(old_dentry); - struct inode *new_inode = d_inode(new_dentry); - - nfs_mark_for_revalidate(old_inode); - - switch (task->tk_status) { - case 0: - if (new_inode != NULL) - nfs_drop_nlink(new_inode); - d_move(old_dentry, new_dentry); - nfs_set_verifier(new_dentry, - nfs_save_change_attribute(data->new_dir)); - break; - case -ENOENT: - nfs_dentry_handle_enoent(old_dentry); - } -} - /* * RENAME * FIXME: Some nfsds, like the Linux user space nfsd, may generate a @@ -1999,7 +1976,7 @@ int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, { struct inode *old_inode = d_inode(old_dentry); struct inode *new_inode = d_inode(new_dentry); - struct dentry *dentry = NULL; + struct dentry *dentry = NULL, *rehash = NULL; struct rpc_task *task; int error = -EBUSY; @@ -2022,8 +1999,10 @@ int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, * To prevent any new references to the target during the * rename, we unhash the dentry in advance. */ - if (!d_unhashed(new_dentry)) + if (!d_unhashed(new_dentry)) { d_drop(new_dentry); + rehash = new_dentry; + } if (d_count(new_dentry) > 2) { int err; @@ -2040,6 +2019,7 @@ int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, goto out; new_dentry = dentry; + rehash = NULL; new_inode = NULL; } } @@ -2048,8 +2028,7 @@ int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, if (new_inode != NULL) NFS_PROTO(new_inode)->return_delegation(new_inode); - task = nfs_async_rename(old_dir, new_dir, old_dentry, new_dentry, - nfs_complete_rename); + task = nfs_async_rename(old_dir, new_dir, old_dentry, new_dentry, NULL); if (IS_ERR(task)) { error = PTR_ERR(task); goto out; @@ -2059,9 +2038,27 @@ int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, if (error == 0) error = task->tk_status; rpc_put_task(task); + nfs_mark_for_revalidate(old_inode); out: + if (rehash) + d_rehash(rehash); trace_nfs_rename_exit(old_dir, old_dentry, new_dir, new_dentry, error); + if (!error) { + if (new_inode != NULL) + nfs_drop_nlink(new_inode); + /* + * The d_move() should be here instead of in an async RPC completion + * handler because we need the proper locks to move the dentry. If + * we're interrupted by a signal, the async RPC completion handler + * should mark the directories for revalidation. + */ + d_move(old_dentry, new_dentry); + nfs_set_verifier(new_dentry, + nfs_save_change_attribute(new_dir)); + } else if (error == -ENOENT) + nfs_dentry_handle_enoent(old_dentry); + /* new dentry created? */ if (dentry) dput(dentry); From 2e31b4cb895ae78db31dffb860cd255d86c6561c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 27 Jun 2017 17:40:50 -0400 Subject: [PATCH 1019/1065] NFSv4.1: nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete() The current code works only for the case where we have exactly one slot, which is no longer true. nfs4_free_slot() will automatically declare the callback channel to be drained when all slots have been returned. Signed-off-by: Trond Myklebust --- fs/nfs/callback_xdr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c index c14758e08d73..390ac9c39c59 100644 --- a/fs/nfs/callback_xdr.c +++ b/fs/nfs/callback_xdr.c @@ -753,7 +753,6 @@ static void nfs4_callback_free_slot(struct nfs4_session *session, * A single slot, so highest used slotid is either 0 or -1 */ nfs4_free_slot(tbl, slot); - nfs4_slot_tbl_drain_complete(tbl); spin_unlock(&tbl->slot_tbl_lock); } From a8f20fd25bdce81a8e41767c39f456d346b63427 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Wed, 28 Jun 2017 08:59:16 +0800 Subject: [PATCH 1020/1065] ALSA: hda - set input_path bitmap to zero after moving it to new place Recently we met a problem, the codec has valid adcs and input pins, and they can form valid input paths, but the driver does not build valid controls for them like "Mic boost", "Capture Volume" and "Capture Switch". Through debugging, I found the driver needs to shrink the invalid adcs and input paths for this machine, so it will move the whole column bitmap value to the previous column, after moving it, the driver forgets to set the original column bitmap value to zero, as a result, the driver will invalidate the path whose index value is the original colume bitmap value. After executing this function, all valid input paths are invalidated by a mistake, there are no any valid input paths, so the driver won't build controls for them. Fixes: 3a65bcdc577a ("ALSA: hda - Fix inconsistent input_paths after ADC reduction") Cc: Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 2842c82363c0..71545b56b4c8 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -3174,6 +3174,7 @@ static int check_dyn_adc_switch(struct hda_codec *codec) spec->input_paths[i][nums]); spec->input_paths[i][nums] = spec->input_paths[i][n]; + spec->input_paths[i][n] = 0; } } nums++; From f4a4381ba4944603905167d044d865990356ba22 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 27 Jun 2017 16:02:51 +0200 Subject: [PATCH 1021/1065] drm/etnaviv: fix submit flags getting overwritten by BO content The addition of the flags member to etnaviv_gem_submit structure didn't take into account that the last member of this structure is a variable length array. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gem.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem.h b/drivers/gpu/drm/etnaviv/etnaviv_gem.h index c4a091e87426..e437fba1209d 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem.h +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.h @@ -106,9 +106,10 @@ struct etnaviv_gem_submit { struct etnaviv_gpu *gpu; struct ww_acquire_ctx ticket; struct dma_fence *fence; + u32 flags; unsigned int nr_bos; struct etnaviv_gem_submit_bo bos[0]; - u32 flags; + /* No new members here, the previous one is variable-length! */ }; int etnaviv_gem_wait_bo(struct etnaviv_gpu *gpu, struct drm_gem_object *obj, From 426ef1bb40a3bd99ccd16d629bd1294805e96fc6 Mon Sep 17 00:00:00 2001 From: Daniel Stone Date: Thu, 22 Jun 2017 12:22:22 +0100 Subject: [PATCH 1022/1065] drm/etnaviv: Fix implicit/explicit sync sense inversion We were reading the no-implicit sync flag the wrong way around, synchronizing too much for the explicit case, and not at all for the implicit case. Oops. Signed-off-by: Daniel Stone Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c index de80ee1b71df..1013765274da 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c @@ -172,7 +172,7 @@ static int submit_fence_sync(const struct etnaviv_gem_submit *submit) for (i = 0; i < submit->nr_bos; i++) { struct etnaviv_gem_object *etnaviv_obj = submit->bos[i].obj; bool write = submit->bos[i].flags & ETNA_SUBMIT_BO_WRITE; - bool explicit = !(submit->flags & ETNA_SUBMIT_NO_IMPLICIT); + bool explicit = !!(submit->flags & ETNA_SUBMIT_NO_IMPLICIT); ret = etnaviv_gpu_fence_sync_obj(etnaviv_obj, context, write, explicit); From d94815f917da770d42c377786dc428f542e38f71 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 28 Jun 2017 12:02:02 +0200 Subject: [PATCH 1023/1065] ALSA: hda - Fix endless loop of codec configure azx_codec_configure() loops over the codecs found on the given controller via a linked list. The code used to work in the past, but in the current version, this may lead to an endless loop when a codec binding returns an error. The culprit is that the snd_hda_codec_configure() unregisters the device upon error, and this eventually deletes the given codec object from the bus. Since the list is initialized via list_del_init(), the next object points to the same device itself. This behavior change was introduced at splitting the HD-audio code code, and forgotten to adapt it here. For fixing this bug, just use a *_safe() version of list iteration. Fixes: d068ebc25e6e ("ALSA: hda - Move some codes up to hdac_bus struct") Reported-by: Daniel Vetter Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.h | 2 ++ sound/pci/hda/hda_controller.c | 8 ++++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index d6fb2d5d01a7..60ce1cfc300f 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -295,6 +295,8 @@ struct hda_codec { #define list_for_each_codec(c, bus) \ list_for_each_entry(c, &(bus)->core.codec_list, core.list) +#define list_for_each_codec_safe(c, n, bus) \ + list_for_each_entry_safe(c, n, &(bus)->core.codec_list, core.list) /* snd_hda_codec_read/write optional flags */ #define HDA_RW_NO_RESPONSE_FALLBACK (1 << 0) diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index 3715a5725613..1c60beb5b70a 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -1337,8 +1337,12 @@ EXPORT_SYMBOL_GPL(azx_probe_codecs); /* configure each codec instance */ int azx_codec_configure(struct azx *chip) { - struct hda_codec *codec; - list_for_each_codec(codec, &chip->bus) { + struct hda_codec *codec, *next; + + /* use _safe version here since snd_hda_codec_configure() deregisters + * the device upon error and deletes itself from the bus list. + */ + list_for_each_codec_safe(codec, next, &chip->bus) { snd_hda_codec_configure(codec); } return 0; From e85f82ff9b8ef503923a3be8ca6b5fd1908a7f3f Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 28 Jun 2017 13:41:22 +0200 Subject: [PATCH 1024/1065] ovl: copy-up: don't unlock between lookup and link Nothing prevents mischief on upper layer while we are busy copying up the data. Move the lookup right before the looked up dentry is actually used. Signed-off-by: Miklos Szeredi Fixes: 01ad3eb8a073 ("ovl: concurrent copy up of regular files") Cc: # v4.11 --- fs/overlayfs/copy_up.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index 7a44533f4bbf..ded8bfeb193e 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -330,15 +330,9 @@ static int ovl_copy_up_locked(struct dentry *workdir, struct dentry *upperdir, .link = link }; - upper = lookup_one_len(dentry->d_name.name, upperdir, - dentry->d_name.len); - err = PTR_ERR(upper); - if (IS_ERR(upper)) - goto out; - err = security_inode_copy_up(dentry, &new_creds); if (err < 0) - goto out1; + goto out; if (new_creds) old_creds = override_creds(new_creds); @@ -362,7 +356,7 @@ static int ovl_copy_up_locked(struct dentry *workdir, struct dentry *upperdir, } if (err) - goto out2; + goto out; if (S_ISREG(stat->mode)) { struct path upperpath; @@ -403,6 +397,14 @@ static int ovl_copy_up_locked(struct dentry *workdir, struct dentry *upperdir, if (err) goto out_cleanup; + upper = lookup_one_len(dentry->d_name.name, upperdir, + dentry->d_name.len); + if (IS_ERR(upper)) { + err = PTR_ERR(upper); + upper = NULL; + goto out_cleanup; + } + if (tmpfile) err = ovl_do_link(temp, udir, upper, true); else @@ -416,17 +418,15 @@ static int ovl_copy_up_locked(struct dentry *workdir, struct dentry *upperdir, /* Restore timestamps on parent (best effort) */ ovl_set_timestamps(upperdir, pstat); -out2: - dput(temp); -out1: - dput(upper); out: + dput(temp); + dput(upper); return err; out_cleanup: if (!tmpfile) ovl_cleanup(wdir, temp); - goto out2; + goto out; } /* From fbaf94ee3cd5cfa85fe2d4d04be968820cb00556 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 28 Jun 2017 13:41:22 +0200 Subject: [PATCH 1025/1065] ovl: don't set origin on broken lower hardlink When copying up a file that has multiple hard links we need to break any association with the origin file. This makes copy-up be essentially an atomic replace. The new file has nothing to do with the old one (except having the same data and metadata initially), so don't set the overlay.origin attribute. We can relax this in the future when we are able to index upper object by origin. Signed-off-by: Miklos Szeredi Fixes: 3a1e819b4e80 ("ovl: store file handle of lower inode on copy up") --- fs/overlayfs/copy_up.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index ded8bfeb193e..a2a65120c9d0 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -392,10 +392,15 @@ static int ovl_copy_up_locked(struct dentry *workdir, struct dentry *upperdir, /* * Store identifier of lower inode in upper inode xattr to * allow lookup of the copy up origin inode. + * + * Don't set origin when we are breaking the association with a lower + * hard link. */ - err = ovl_set_origin(dentry, lowerpath->dentry, temp); - if (err) - goto out_cleanup; + if (S_ISDIR(stat->mode) || stat->nlink == 1) { + err = ovl_set_origin(dentry, lowerpath->dentry, temp); + if (err) + goto out_cleanup; + } upper = lookup_one_len(dentry->d_name.name, upperdir, dentry->d_name.len); From 84a21dbdef0b96d773599c33c2afbb002198d303 Mon Sep 17 00:00:00 2001 From: Suravee Suthikulpanit Date: Mon, 26 Jun 2017 04:28:04 -0500 Subject: [PATCH 1026/1065] iommu/amd: Fix interrupt remapping when disable guest_mode Pass-through devices to VM guest can get updated IRQ affinity information via irq_set_affinity() when not running in guest mode. Currently, AMD IOMMU driver in GA mode ignores the updated information if the pass-through device is setup to use vAPIC regardless of guest_mode. This could cause invalid interrupt remapping. Also, the guest_mode bit should be set and cleared only when SVM updates posted-interrupt interrupt remapping information. Signed-off-by: Suravee Suthikulpanit Cc: Joerg Roedel Fixes: d98de49a53e48 ('iommu/amd: Enable vAPIC interrupt remapping mode by default') Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 63cacf5d6cf2..0f1219fa8561 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -3879,11 +3879,9 @@ static void irte_ga_prepare(void *entry, u8 vector, u32 dest_apicid, int devid) { struct irte_ga *irte = (struct irte_ga *) entry; - struct iommu_dev_data *dev_data = search_dev_data(devid); irte->lo.val = 0; irte->hi.val = 0; - irte->lo.fields_remap.guest_mode = dev_data ? dev_data->use_vapic : 0; irte->lo.fields_remap.int_type = delivery_mode; irte->lo.fields_remap.dm = dest_mode; irte->hi.fields.vector = vector; @@ -3939,10 +3937,10 @@ static void irte_ga_set_affinity(void *entry, u16 devid, u16 index, struct irte_ga *irte = (struct irte_ga *) entry; struct iommu_dev_data *dev_data = search_dev_data(devid); - if (!dev_data || !dev_data->use_vapic) { + if (!dev_data || !dev_data->use_vapic || + !irte->lo.fields_remap.guest_mode) { irte->hi.fields.vector = vector; irte->lo.fields_remap.destination = dest_apicid; - irte->lo.fields_remap.guest_mode = 0; modify_irte_ga(devid, index, irte, NULL); } } From 9ae3b3f52c62ddd5eb12c57f195f4f38121faa01 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 28 Jun 2017 15:30:13 -0600 Subject: [PATCH 1027/1065] block: provide bio_uninit() free freeing integrity/task associations Wen reports significant memory leaks with DIF and O_DIRECT: "With nvme devive + T10 enabled, On a system it has 256GB and started logging /proc/meminfo & /proc/slabinfo for every minute and in an hour it increased by 15968128 kB or ~15+GB.. Approximately 256 MB / minute leaking. /proc/meminfo | grep SUnreclaim... SUnreclaim: 6752128 kB SUnreclaim: 6874880 kB SUnreclaim: 7238080 kB .... SUnreclaim: 22307264 kB SUnreclaim: 22485888 kB SUnreclaim: 22720256 kB When testcases with T10 enabled call into __blkdev_direct_IO_simple, code doesn't free memory allocated by bio_integrity_alloc. The patch fixes the issue. HTX has been run with +60 hours without failure." Since __blkdev_direct_IO_simple() allocates the bio on the stack, it doesn't go through the regular bio free. This means that any ancillary data allocated with the bio through the stack is not freed. Hence, we can leak the integrity data associated with the bio, if the device is using DIF/DIX. Fix this by providing a bio_uninit() and export it, so that we can use it to free this data. Note that this is a minimal fix for this issue. Any current user of bio's that are allocated outside of bio_alloc_bioset() suffers from this issue, most notably some drivers. We will fix those in a more comprehensive patch for 4.13. This also means that the commit marked as being fixed by this isn't the real culprit, it's just the most obvious one out there. Fixes: 542ff7bf18c6 ("block: new direct I/O implementation") Reported-by: Wen Xiong Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- block/bio.c | 12 +++++++++--- fs/block_dev.c | 5 ++++- include/linux/bio.h | 1 + 3 files changed, 14 insertions(+), 4 deletions(-) diff --git a/block/bio.c b/block/bio.c index 888e7801c638..26b0810fb8ea 100644 --- a/block/bio.c +++ b/block/bio.c @@ -240,20 +240,21 @@ fallback: return bvl; } -static void __bio_free(struct bio *bio) +void bio_uninit(struct bio *bio) { bio_disassociate_task(bio); if (bio_integrity(bio)) bio_integrity_free(bio); } +EXPORT_SYMBOL(bio_uninit); static void bio_free(struct bio *bio) { struct bio_set *bs = bio->bi_pool; void *p; - __bio_free(bio); + bio_uninit(bio); if (bs) { bvec_free(bs->bvec_pool, bio->bi_io_vec, BVEC_POOL_IDX(bio)); @@ -271,6 +272,11 @@ static void bio_free(struct bio *bio) } } +/* + * Users of this function have their own bio allocation. Subsequently, + * they must remember to pair any call to bio_init() with bio_uninit() + * when IO has completed, or when the bio is released. + */ void bio_init(struct bio *bio, struct bio_vec *table, unsigned short max_vecs) { @@ -297,7 +303,7 @@ void bio_reset(struct bio *bio) { unsigned long flags = bio->bi_flags & (~0UL << BIO_RESET_BITS); - __bio_free(bio); + bio_uninit(bio); memset(bio, 0, BIO_RESET_BYTES); bio->bi_flags = flags; diff --git a/fs/block_dev.c b/fs/block_dev.c index 519599dddd36..0a7404ef9335 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -263,7 +263,10 @@ __blkdev_direct_IO_simple(struct kiocb *iocb, struct iov_iter *iter, kfree(vecs); if (unlikely(bio.bi_error)) - return bio.bi_error; + ret = bio.bi_error; + + bio_uninit(&bio); + return ret; } diff --git a/include/linux/bio.h b/include/linux/bio.h index d1b04b0e99cf..a7e29fa0981f 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -426,6 +426,7 @@ extern void bio_advance(struct bio *, unsigned); extern void bio_init(struct bio *bio, struct bio_vec *table, unsigned short max_vecs); +extern void bio_uninit(struct bio *); extern void bio_reset(struct bio *); void bio_chain(struct bio *, struct bio *); From 6474924e2b5ddb0030c355558966adcbe3b49022 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 28 Jun 2017 15:30:02 +0200 Subject: [PATCH 1028/1065] arch: remove unused macro/function thread_saved_pc() The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: Tobias Klauser Acked-by: Geert Uytterhoeven Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- arch/arc/include/asm/processor.h | 2 -- arch/blackfin/include/asm/processor.h | 5 ----- arch/c6x/include/asm/processor.h | 5 ----- arch/cris/arch-v10/kernel/process.c | 8 -------- arch/cris/arch-v32/kernel/process.c | 8 -------- arch/cris/include/asm/processor.h | 2 -- arch/frv/include/asm/processor.h | 5 ----- arch/frv/kernel/process.c | 9 --------- arch/h8300/include/asm/processor.h | 4 ---- arch/h8300/kernel/process.c | 5 ----- arch/hexagon/include/asm/processor.h | 3 --- arch/hexagon/kernel/process.c | 8 -------- arch/ia64/include/asm/processor.h | 17 ----------------- arch/m32r/include/asm/processor.h | 2 -- arch/m32r/kernel/process.c | 8 -------- arch/m68k/include/asm/processor.h | 2 -- arch/m68k/kernel/process.c | 14 -------------- arch/microblaze/include/asm/processor.h | 6 ------ arch/microblaze/kernel/process.c | 17 ----------------- arch/mn10300/include/asm/processor.h | 5 ----- arch/mn10300/kernel/process.c | 8 -------- arch/nios2/include/asm/processor.h | 3 --- arch/openrisc/include/asm/processor.h | 5 ----- arch/openrisc/kernel/process.c | 5 ----- arch/parisc/include/asm/processor.h | 5 ----- arch/parisc/kernel/process.c | 5 ----- arch/powerpc/include/asm/processor.h | 6 ------ arch/s390/include/asm/processor.h | 5 ----- arch/s390/kernel/process.c | 25 ------------------------- arch/score/include/asm/processor.h | 1 - arch/score/kernel/process.c | 5 ----- arch/sparc/include/asm/processor_32.h | 3 --- arch/sparc/include/asm/processor_64.h | 2 -- arch/sparc/kernel/process_32.c | 8 -------- arch/sparc/kernel/process_64.c | 19 ------------------- arch/tile/include/asm/processor.h | 7 ------- arch/um/include/asm/processor-generic.h | 2 -- arch/um/kernel/um_arch.c | 6 ------ arch/x86/include/asm/processor.h | 2 -- arch/x86/kernel/process.c | 11 ----------- arch/xtensa/include/asm/processor.h | 2 -- 41 files changed, 270 deletions(-) diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h index 6e1242da0159..4104a0839214 100644 --- a/arch/arc/include/asm/processor.h +++ b/arch/arc/include/asm/processor.h @@ -86,8 +86,6 @@ struct task_struct; #define TSK_K_BLINK(tsk) TSK_K_REG(tsk, 4) #define TSK_K_FP(tsk) TSK_K_REG(tsk, 0) -#define thread_saved_pc(tsk) TSK_K_BLINK(tsk) - extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp); diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index 85d4af97c986..dbdbb8a558df 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -75,11 +75,6 @@ static inline void release_thread(struct task_struct *dead_task) { } -/* - * Return saved PC of a blocked thread. - */ -#define thread_saved_pc(tsk) (tsk->thread.pc) - unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) \ diff --git a/arch/c6x/include/asm/processor.h b/arch/c6x/include/asm/processor.h index b9eb3da7f278..7c87b5be53b5 100644 --- a/arch/c6x/include/asm/processor.h +++ b/arch/c6x/include/asm/processor.h @@ -95,11 +95,6 @@ static inline void release_thread(struct task_struct *dead_task) #define copy_segments(tsk, mm) do { } while (0) #define release_segments(mm) do { } while (0) -/* - * saved PC of a blocked thread. - */ -#define thread_saved_pc(tsk) (task_pt_regs(tsk)->pc) - /* * saved kernel SP and DP of a blocked thread. */ diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c index e299d30105b5..a2cdb1521aca 100644 --- a/arch/cris/arch-v10/kernel/process.c +++ b/arch/cris/arch-v10/kernel/process.c @@ -69,14 +69,6 @@ void hard_reset_now (void) while(1) /* waiting for RETRIBUTION! */ ; } -/* - * Return saved PC of a blocked thread. - */ -unsigned long thread_saved_pc(struct task_struct *t) -{ - return task_pt_regs(t)->irp; -} - /* setup the child's kernel stack with a pt_regs and switch_stack on it. * it will be un-nested during _resume and _ret_from_sys_call when the * new thread is scheduled. diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c index c530a8fa87ce..fe87b383fbf3 100644 --- a/arch/cris/arch-v32/kernel/process.c +++ b/arch/cris/arch-v32/kernel/process.c @@ -84,14 +84,6 @@ hard_reset_now(void) ; /* Wait for reset. */ } -/* - * Return saved PC of a blocked thread. - */ -unsigned long thread_saved_pc(struct task_struct *t) -{ - return task_pt_regs(t)->erp; -} - /* * Setup the child's kernel stack with a pt_regs and call switch_stack() on it. * It will be unnested during _resume and _ret_from_sys_call when the new thread diff --git a/arch/cris/include/asm/processor.h b/arch/cris/include/asm/processor.h index 15b815df29c1..bc2729e4b2c9 100644 --- a/arch/cris/include/asm/processor.h +++ b/arch/cris/include/asm/processor.h @@ -52,8 +52,6 @@ unsigned long get_wchan(struct task_struct *p); #define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) -extern unsigned long thread_saved_pc(struct task_struct *tsk); - /* Free all resources held by a thread. */ static inline void release_thread(struct task_struct *dead_task) { diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h index ddaeb9cc9143..e4d08d74ed9f 100644 --- a/arch/frv/include/asm/processor.h +++ b/arch/frv/include/asm/processor.h @@ -96,11 +96,6 @@ extern asmlinkage void *restore_user_regs(const struct user_context *target, ... #define release_segments(mm) do { } while (0) #define forget_segments() do { } while (0) -/* - * Return saved PC of a blocked thread. - */ -extern unsigned long thread_saved_pc(struct task_struct *tsk); - unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc) diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c index 5a4c92abc99e..a957b374e3a6 100644 --- a/arch/frv/kernel/process.c +++ b/arch/frv/kernel/process.c @@ -198,15 +198,6 @@ unsigned long get_wchan(struct task_struct *p) return 0; } -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - /* Check whether the thread is blocked in resume() */ - if (in_sched_functions(tsk->thread.pc)) - return ((unsigned long *)tsk->thread.fp)[2]; - else - return tsk->thread.pc; -} - int elf_check_arch(const struct elf32_hdr *hdr) { unsigned long hsr0 = __get_HSR(0); diff --git a/arch/h8300/include/asm/processor.h b/arch/h8300/include/asm/processor.h index 65132d7ae9e5..afa53147e66a 100644 --- a/arch/h8300/include/asm/processor.h +++ b/arch/h8300/include/asm/processor.h @@ -110,10 +110,6 @@ static inline void release_thread(struct task_struct *dead_task) { } -/* - * Return saved PC of a blocked thread. - */ -unsigned long thread_saved_pc(struct task_struct *tsk); unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) \ diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index 0f5db5bb561b..d1ddcabbbe83 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -129,11 +129,6 @@ int copy_thread(unsigned long clone_flags, return 0; } -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - return ((struct pt_regs *)tsk->thread.esp0)->pc; -} - unsigned long get_wchan(struct task_struct *p) { unsigned long fp, pc; diff --git a/arch/hexagon/include/asm/processor.h b/arch/hexagon/include/asm/processor.h index 45a825402f63..ce67940860a5 100644 --- a/arch/hexagon/include/asm/processor.h +++ b/arch/hexagon/include/asm/processor.h @@ -33,9 +33,6 @@ /* task_struct, defined elsewhere, is the "process descriptor" */ struct task_struct; -/* this is defined in arch/process.c */ -extern unsigned long thread_saved_pc(struct task_struct *tsk); - extern void start_thread(struct pt_regs *, unsigned long, unsigned long); /* diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c index de715bab7956..656050c2e6a0 100644 --- a/arch/hexagon/kernel/process.c +++ b/arch/hexagon/kernel/process.c @@ -60,14 +60,6 @@ void arch_cpu_idle(void) local_irq_enable(); } -/* - * Return saved PC of a blocked thread - */ -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - return 0; -} - /* * Copy architecture-specific thread state */ diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h index 26a63d69c599..ab982f07ea68 100644 --- a/arch/ia64/include/asm/processor.h +++ b/arch/ia64/include/asm/processor.h @@ -601,23 +601,6 @@ ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat) *unat = (*unat & ~mask) | (nat << bit); } -/* - * Return saved PC of a blocked thread. - * Note that the only way T can block is through a call to schedule() -> switch_to(). - */ -static inline unsigned long -thread_saved_pc (struct task_struct *t) -{ - struct unw_frame_info info; - unsigned long ip; - - unw_init_from_blocked_task(&info, t); - if (unw_unwind(&info) < 0) - return 0; - unw_get_ip(&info, &ip); - return ip; -} - /* * Get the current instruction/program counter value. */ diff --git a/arch/m32r/include/asm/processor.h b/arch/m32r/include/asm/processor.h index 5767367550c6..657874eeeccc 100644 --- a/arch/m32r/include/asm/processor.h +++ b/arch/m32r/include/asm/processor.h @@ -122,8 +122,6 @@ extern void release_thread(struct task_struct *); extern void copy_segments(struct task_struct *p, struct mm_struct * mm); extern void release_segments(struct mm_struct * mm); -extern unsigned long thread_saved_pc(struct task_struct *); - /* Copy and release all segment info associated with a VM */ #define copy_segments(p, mm) do { } while (0) #define release_segments(mm) do { } while (0) diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index d8ffcfec599c..8cd7e03f4370 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -39,14 +39,6 @@ #include -/* - * Return saved PC of a blocked thread. - */ -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - return tsk->thread.lr; -} - void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index 77239e81379b..94c36030440c 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -130,8 +130,6 @@ static inline void release_thread(struct task_struct *dead_task) { } -extern unsigned long thread_saved_pc(struct task_struct *tsk); - unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) \ diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c index e475c945c8b2..7df92f8b0781 100644 --- a/arch/m68k/kernel/process.c +++ b/arch/m68k/kernel/process.c @@ -40,20 +40,6 @@ asmlinkage void ret_from_fork(void); asmlinkage void ret_from_kernel_thread(void); - -/* - * Return saved PC from a blocked thread - */ -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp; - /* Check whether the thread is blocked in resume() */ - if (in_sched_functions(sw->retpc)) - return ((unsigned long *)sw->a6)[1]; - else - return sw->retpc; -} - void arch_cpu_idle(void) { #if defined(MACH_ATARI_ONLY) diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 37ef196e4519..330d556860ba 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -69,8 +69,6 @@ static inline void release_thread(struct task_struct *dead_task) { } -extern unsigned long thread_saved_pc(struct task_struct *t); - extern unsigned long get_wchan(struct task_struct *p); # define KSTK_EIP(tsk) (0) @@ -121,10 +119,6 @@ static inline void release_thread(struct task_struct *dead_task) { } -/* Return saved (kernel) PC of a blocked thread. */ -# define thread_saved_pc(tsk) \ - ((tsk)->thread.regs ? (tsk)->thread.regs->r15 : 0) - unsigned long get_wchan(struct task_struct *p); /* The size allocated for kernel stacks. This _must_ be a power of two! */ diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index e92a817e645f..6527ec22f158 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -119,23 +119,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, return 0; } -#ifndef CONFIG_MMU -/* - * Return saved PC of a blocked thread. - */ -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - struct cpu_context *ctx = - &(((struct thread_info *)(tsk->stack))->cpu_context); - - /* Check whether the thread is blocked in resume() */ - if (in_sched_functions(ctx->r15)) - return (unsigned long)ctx->r15; - else - return ctx->r14; -} -#endif - unsigned long get_wchan(struct task_struct *p) { /* TBD (used by procfs) */ diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h index 18e17abf7664..3ae479117b42 100644 --- a/arch/mn10300/include/asm/processor.h +++ b/arch/mn10300/include/asm/processor.h @@ -132,11 +132,6 @@ static inline void start_thread(struct pt_regs *regs, /* Free all resources held by a thread. */ extern void release_thread(struct task_struct *); -/* - * Return saved PC of a blocked thread. - */ -extern unsigned long thread_saved_pc(struct task_struct *tsk); - unsigned long get_wchan(struct task_struct *p); #define task_pt_regs(task) ((task)->thread.uregs) diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index c9fa42619c6a..89e8027e07fb 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -39,14 +39,6 @@ #include #include "internal.h" -/* - * return saved PC of a blocked thread. - */ -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - return ((unsigned long *) tsk->thread.sp)[3]; -} - /* * power off function, if any */ diff --git a/arch/nios2/include/asm/processor.h b/arch/nios2/include/asm/processor.h index 3bbbc3d798e5..4944e2e1d8b0 100644 --- a/arch/nios2/include/asm/processor.h +++ b/arch/nios2/include/asm/processor.h @@ -75,9 +75,6 @@ static inline void release_thread(struct task_struct *dead_task) { } -/* Return saved PC of a blocked thread. */ -#define thread_saved_pc(tsk) ((tsk)->thread.kregs->ea) - extern unsigned long get_wchan(struct task_struct *p); #define task_pt_regs(p) \ diff --git a/arch/openrisc/include/asm/processor.h b/arch/openrisc/include/asm/processor.h index a908e6c30a00..396d8f306c21 100644 --- a/arch/openrisc/include/asm/processor.h +++ b/arch/openrisc/include/asm/processor.h @@ -84,11 +84,6 @@ void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp); void release_thread(struct task_struct *); unsigned long get_wchan(struct task_struct *p); -/* - * Return saved PC of a blocked thread. For now, this is the "user" PC - */ -extern unsigned long thread_saved_pc(struct task_struct *t); - #define init_stack (init_thread_union.stack) #define cpu_relax() barrier() diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c index 106859ae27ff..f9b77003f113 100644 --- a/arch/openrisc/kernel/process.c +++ b/arch/openrisc/kernel/process.c @@ -110,11 +110,6 @@ void show_regs(struct pt_regs *regs) show_registers(regs); } -unsigned long thread_saved_pc(struct task_struct *t) -{ - return (unsigned long)user_regs(t->stack)->pc; -} - void release_thread(struct task_struct *dead_task) { } diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index a3661ee6b060..4c6694b4e77e 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -163,12 +163,7 @@ struct thread_struct { .flags = 0 \ } -/* - * Return saved PC of a blocked thread. This is used by ps mostly. - */ - struct task_struct; -unsigned long thread_saved_pc(struct task_struct *t); void show_trace(struct task_struct *task, unsigned long *stack); /* diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 4516a5b53f38..b64d7d21646e 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -239,11 +239,6 @@ copy_thread(unsigned long clone_flags, unsigned long usp, return 0; } -unsigned long thread_saved_pc(struct task_struct *t) -{ - return t->thread.regs.kpc; -} - unsigned long get_wchan(struct task_struct *p) { diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index bb99b651085a..1189d04f3bd1 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -378,12 +378,6 @@ struct thread_struct { } #endif -/* - * Return saved PC of a blocked thread. For now, this is the "user" PC - */ -#define thread_saved_pc(tsk) \ - ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) - #define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.regs) unsigned long get_wchan(struct task_struct *p); diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index 60d395fdc864..aeac013968f2 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -221,11 +221,6 @@ extern void release_thread(struct task_struct *); /* Free guarded storage control block for current */ void exit_thread_gs(void); -/* - * Return saved PC of a blocked thread. - */ -extern unsigned long thread_saved_pc(struct task_struct *t); - unsigned long get_wchan(struct task_struct *p); #define task_pt_regs(tsk) ((struct pt_regs *) \ (task_stack_page(tsk) + THREAD_SIZE) - 1) diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 999d7154bbdc..bb32b8618bf6 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -41,31 +41,6 @@ asmlinkage void ret_from_fork(void) asm ("ret_from_fork"); -/* - * Return saved PC of a blocked thread. used in kernel/sched. - * resume in entry.S does not create a new stack frame, it - * just stores the registers %r6-%r15 to the frame given by - * schedule. We want to return the address of the caller of - * schedule, so we have to walk the backchain one time to - * find the frame schedule() store its return address. - */ -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - struct stack_frame *sf, *low, *high; - - if (!tsk || !task_stack_page(tsk)) - return 0; - low = task_stack_page(tsk); - high = (struct stack_frame *) task_pt_regs(tsk); - sf = (struct stack_frame *) tsk->thread.ksp; - if (sf <= low || sf > high) - return 0; - sf = (struct stack_frame *) sf->back_chain; - if (sf <= low || sf > high) - return 0; - return sf->gprs[8]; -} - extern void kernel_thread_starter(void); /* diff --git a/arch/score/include/asm/processor.h b/arch/score/include/asm/processor.h index d9a922d8711b..299274581968 100644 --- a/arch/score/include/asm/processor.h +++ b/arch/score/include/asm/processor.h @@ -13,7 +13,6 @@ struct task_struct; */ extern void (*cpu_wait)(void); -extern unsigned long thread_saved_pc(struct task_struct *tsk); extern void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp); extern unsigned long get_wchan(struct task_struct *p); diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c index eb64d7a677cb..6e20241a1ed4 100644 --- a/arch/score/kernel/process.c +++ b/arch/score/kernel/process.c @@ -101,11 +101,6 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *r) return 1; } -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - return task_pt_regs(tsk)->cp0_epc; -} - unsigned long get_wchan(struct task_struct *task) { if (!task || task == current || task->state == TASK_RUNNING) diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h index dd27159819eb..b395e5620c0b 100644 --- a/arch/sparc/include/asm/processor_32.h +++ b/arch/sparc/include/asm/processor_32.h @@ -67,9 +67,6 @@ struct thread_struct { .current_ds = KERNEL_DS, \ } -/* Return saved PC of a blocked thread. */ -unsigned long thread_saved_pc(struct task_struct *t); - /* Do necessary setup to start up a newly executed thread. */ static inline void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h index b58ee9018433..f04dc5a43062 100644 --- a/arch/sparc/include/asm/processor_64.h +++ b/arch/sparc/include/asm/processor_64.h @@ -89,9 +89,7 @@ struct thread_struct { #include #include -/* Return saved PC of a blocked thread. */ struct task_struct; -unsigned long thread_saved_pc(struct task_struct *); /* On Uniprocessor, even in RMO processes see TSO semantics */ #ifdef CONFIG_SMP diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c index b6dac8e980f0..9245f93398c7 100644 --- a/arch/sparc/kernel/process_32.c +++ b/arch/sparc/kernel/process_32.c @@ -176,14 +176,6 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp) printk("\n"); } -/* - * Note: sparc64 has a pretty intricated thread_saved_pc, check it out. - */ -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - return task_thread_info(tsk)->kpc; -} - /* * Free current thread data structures etc.. */ diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c index 1badc493e62e..b96104da5bd6 100644 --- a/arch/sparc/kernel/process_64.c +++ b/arch/sparc/kernel/process_64.c @@ -400,25 +400,6 @@ core_initcall(sparc_sysrq_init); #endif -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - struct thread_info *ti = task_thread_info(tsk); - unsigned long ret = 0xdeadbeefUL; - - if (ti && ti->ksp) { - unsigned long *sp; - sp = (unsigned long *)(ti->ksp + STACK_BIAS); - if (((unsigned long)sp & (sizeof(long) - 1)) == 0UL && - sp[14]) { - unsigned long *fp; - fp = (unsigned long *)(sp[14] + STACK_BIAS); - if (((unsigned long)fp & (sizeof(long) - 1)) == 0UL) - ret = fp[15]; - } - } - return ret; -} - /* Free current thread data structures etc.. */ void exit_thread(struct task_struct *tsk) { diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h index 0bc9968b97a1..f71e5206650b 100644 --- a/arch/tile/include/asm/processor.h +++ b/arch/tile/include/asm/processor.h @@ -214,13 +214,6 @@ static inline void release_thread(struct task_struct *dead_task) extern void prepare_exit_to_usermode(struct pt_regs *regs, u32 flags); - -/* - * Return saved (kernel) PC of a blocked thread. - * Only used in a printk() in kernel/sched/core.c, so don't work too hard. - */ -#define thread_saved_pc(t) ((t)->thread.pc) - unsigned long get_wchan(struct task_struct *p); /* Return initial ksp value for given task. */ diff --git a/arch/um/include/asm/processor-generic.h b/arch/um/include/asm/processor-generic.h index 2d1e0dd5bb0b..f6d1a3f747a9 100644 --- a/arch/um/include/asm/processor-generic.h +++ b/arch/um/include/asm/processor-generic.h @@ -58,8 +58,6 @@ static inline void release_thread(struct task_struct *task) { } -extern unsigned long thread_saved_pc(struct task_struct *t); - static inline void mm_copy_segments(struct mm_struct *from_mm, struct mm_struct *new_mm) { diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 64a1fd06f3fd..7b5640117325 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -56,12 +56,6 @@ union thread_union cpu0_irqstack __attribute__((__section__(".data..init_irqstack"))) = { INIT_THREAD_INFO(init_task) }; -unsigned long thread_saved_pc(struct task_struct *task) -{ - /* FIXME: Need to look up userspace_pid by cpu */ - return os_process_pc(userspace_pid[0]); -} - /* Changed in setup_arch, which is called in early boot */ static char host_info[(__NEW_UTS_LEN + 1) * 5]; diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 3cada998a402..a28b671f1549 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -860,8 +860,6 @@ extern unsigned long KSTK_ESP(struct task_struct *task); #endif /* CONFIG_X86_64 */ -extern unsigned long thread_saved_pc(struct task_struct *tsk); - extern void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 0bb88428cbf2..3ca198080ea9 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -544,17 +544,6 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) return randomize_page(mm->brk, 0x02000000); } -/* - * Return saved PC of a blocked thread. - * What is this good for? it will be always the scheduler or ret_from_fork. - */ -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - struct inactive_task_frame *frame = - (struct inactive_task_frame *) READ_ONCE(tsk->thread.sp); - return READ_ONCE_NOCHECK(frame->ret_addr); -} - /* * Called from fs/proc with a reference on @p to find the function * which called into schedule(). This needs to be done carefully diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h index 003eeee3fbc6..30ee8c608853 100644 --- a/arch/xtensa/include/asm/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -213,8 +213,6 @@ struct mm_struct; #define release_segments(mm) do { } while(0) #define forget_segments() do { } while (0) -#define thread_saved_pc(tsk) (task_pt_regs(tsk)->pc) - extern unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) From ad537b822577fcc143325786cd6ad50d7b9df31c Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Fri, 23 Jun 2017 13:45:16 +0200 Subject: [PATCH 1029/1065] gpiolib: fix filtering out unwanted events GPIOEVENT_REQUEST_BOTH_EDGES is not a single flag, but a binary OR of GPIOEVENT_REQUEST_RISING_EDGE and GPIOEVENT_REQUEST_FALLING_EDGE. The expression 'le->eflags & GPIOEVENT_REQUEST_BOTH_EDGES' we'll get evaluated to true even if only one event type was requested. Fix it by checking both RISING & FALLING flags explicitly. Cc: stable@vger.kernel.org Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Signed-off-by: Bartosz Golaszewski Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 5db44139cef8..a42a1eea5714 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -708,7 +708,8 @@ static irqreturn_t lineevent_irq_thread(int irq, void *p) ge.timestamp = ktime_get_real_ns(); - if (le->eflags & GPIOEVENT_REQUEST_BOTH_EDGES) { + if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE + && le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) { int level = gpiod_get_value_cansleep(le->desc); if (level) From c06632ea054c49510efacb42c52aab693c45b7ba Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 23 Jun 2017 09:26:13 +0200 Subject: [PATCH 1030/1065] gpio: acpi: Skip _AEI entries without a handler rather then aborting the scan acpi_walk_resources will stop as soon as the callback passed in returns an error status. On a x86 tablet I have the first GpioInt in the _AEI resource list has no handler defined in the DSDT, causing acpi_walk_resources to abort scanning the rest of the resource list, which does define valid ACPI GPIO events. This commit changes the return for not finding a handler from AE_BAD_PARAMETER to AE_OK so that the rest of the resource list will get scanned normally in case of missing event handlers. Signed-off-by: Hans de Goede Acked-by: Mika Westerberg Acked-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 2185232da823..8fa5fcd00e9a 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -201,7 +201,7 @@ static acpi_status acpi_gpiochip_request_interrupt(struct acpi_resource *ares, handler = acpi_gpio_irq_handler_evt; } if (!handler) - return AE_BAD_PARAMETER; + return AE_OK; pin = acpi_gpiochip_pin_to_gpio_offset(chip->gpiodev, pin); if (pin < 0) From 1d80df93d9d170eba8c3654719e5857307efd077 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 23 Jun 2017 13:59:11 -0700 Subject: [PATCH 1031/1065] Revert "pinctrl: rockchip: avoid hardirq-unsafe functions in irq_chip" This reverts commit 88bb94216f59e10802aaf78c858a4146085faf18. It introduced a new CONFIG_DEBUG_ATOMIC_SLEEP warning in v4.12-rc1: [ 7226.716713] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238 [ 7226.716716] in_atomic(): 0, irqs_disabled(): 0, pid: 1708, name: bash [ 7226.716722] CPU: 1 PID: 1708 Comm: bash Not tainted 4.12.0-rc6+ #1213 [ 7226.716724] Hardware name: Google Kevin (DT) [ 7226.716726] Call trace: [ 7226.716738] [] dump_backtrace+0x0/0x24c [ 7226.716743] [] show_stack+0x20/0x28 [ 7226.716749] [] dump_stack+0x90/0xb0 [ 7226.716755] [] ___might_sleep+0x10c/0x124 [ 7226.716760] [] __might_sleep+0x78/0x88 [ 7226.716765] [] mutex_lock+0x2c/0x64 [ 7226.716771] [] rockchip_irq_bus_lock+0x30/0x3c [ 7226.716777] [] __irq_get_desc_lock+0x78/0x98 [ 7226.716782] [] irq_set_irq_wake+0x44/0x12c [ 7226.716787] [] dev_pm_arm_wake_irq+0x4c/0x58 [ 7226.716792] [] device_wakeup_arm_wake_irqs+0x3c/0x58 [ 7226.716796] [] dpm_suspend_noirq+0xf8/0x3a0 [ 7226.716800] [] suspend_devices_and_enter+0x1a4/0x9a8 [ 7226.716803] [] pm_suspend+0x664/0x6a4 [ 7226.716807] [] state_store+0xd4/0xf8 ... It was reported on -rc1, and it's still not fixed in -rc6, so it should just be reverted. Cc: John Keeping Signed-off-by: Brian Norris Reviewed-by: Heiko Stuebner Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-rockchip.c | 44 +++--------------------------- 1 file changed, 4 insertions(+), 40 deletions(-) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index f141aa0430b1..9dd981ddbb17 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -143,9 +143,6 @@ struct rockchip_drv { * @gpio_chip: gpiolib chip * @grange: gpio range * @slock: spinlock for the gpio bank - * @irq_lock: bus lock for irq chip - * @new_irqs: newly configured irqs which must be muxed as GPIOs in - * irq_bus_sync_unlock() */ struct rockchip_pin_bank { void __iomem *reg_base; @@ -168,8 +165,6 @@ struct rockchip_pin_bank { struct pinctrl_gpio_range grange; raw_spinlock_t slock; u32 toggle_edge_mode; - struct mutex irq_lock; - u32 new_irqs; }; #define PIN_BANK(id, pins, label) \ @@ -2134,12 +2129,11 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) int ret; /* make sure the pin is configured as gpio input */ - ret = rockchip_verify_mux(bank, d->hwirq, RK_FUNC_GPIO); + ret = rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO); if (ret < 0) return ret; - bank->new_irqs |= mask; - + clk_enable(bank->clk); raw_spin_lock_irqsave(&bank->slock, flags); data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); @@ -2197,6 +2191,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) default: irq_gc_unlock(gc); raw_spin_unlock_irqrestore(&bank->slock, flags); + clk_disable(bank->clk); return -EINVAL; } @@ -2205,6 +2200,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) irq_gc_unlock(gc); raw_spin_unlock_irqrestore(&bank->slock, flags); + clk_disable(bank->clk); return 0; } @@ -2248,34 +2244,6 @@ static void rockchip_irq_disable(struct irq_data *d) clk_disable(bank->clk); } -static void rockchip_irq_bus_lock(struct irq_data *d) -{ - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - struct rockchip_pin_bank *bank = gc->private; - - clk_enable(bank->clk); - mutex_lock(&bank->irq_lock); -} - -static void rockchip_irq_bus_sync_unlock(struct irq_data *d) -{ - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - struct rockchip_pin_bank *bank = gc->private; - - while (bank->new_irqs) { - unsigned int irq = __ffs(bank->new_irqs); - int ret; - - ret = rockchip_set_mux(bank, irq, RK_FUNC_GPIO); - WARN_ON(ret < 0); - - bank->new_irqs &= ~BIT(irq); - } - - mutex_unlock(&bank->irq_lock); - clk_disable(bank->clk); -} - static int rockchip_interrupts_register(struct platform_device *pdev, struct rockchip_pinctrl *info) { @@ -2342,9 +2310,6 @@ static int rockchip_interrupts_register(struct platform_device *pdev, gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend; gc->chip_types[0].chip.irq_resume = rockchip_irq_resume; gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type; - gc->chip_types[0].chip.irq_bus_lock = rockchip_irq_bus_lock; - gc->chip_types[0].chip.irq_bus_sync_unlock = - rockchip_irq_bus_sync_unlock; gc->wake_enabled = IRQ_MSK(bank->nr_pins); irq_set_chained_handler_and_data(bank->irq, @@ -2518,7 +2483,6 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data( int bank_pins = 0; raw_spin_lock_init(&bank->slock); - mutex_init(&bank->irq_lock); bank->drvdata = d; bank->pin_base = ctrl->nr_pins; ctrl->nr_pins += bank->nr_pins; From 0f17976568b3f72e676450af0c0db6f8752253d6 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Thu, 29 Jun 2017 10:05:45 -0400 Subject: [PATCH 1032/1065] ftrace: Fix regression with module command in stack_trace_filter When doing the following command: # echo ":mod:kvm_intel" > /sys/kernel/tracing/stack_trace_filter it triggered a crash. This happened with the clean up of probes. It required all callers to the regex function (doing ftrace filtering) to have ops->private be a pointer to a trace_array. But for the stack tracer, that is not the case. Allow for the ops->private to be NULL, and change the function command callbacks to handle the trace_array pointer being NULL as well. Fixes: d2afd57a4b96 ("tracing/ftrace: Allow instances to have their own function probes") Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/ftrace.c | 3 --- kernel/trace/trace.c | 3 +++ kernel/trace/trace_functions.c | 12 ++++++++++++ kernel/trace/trace_stack.c | 6 ++++-- 4 files changed, 19 insertions(+), 5 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 9e5841dc14b5..b308be30dfb9 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -4337,9 +4337,6 @@ static int ftrace_process_regex(struct ftrace_iterator *iter, command = strsep(&next, ":"); - if (WARN_ON_ONCE(!tr)) - return -EINVAL; - mutex_lock(&ftrace_cmd_mutex); list_for_each_entry(p, &ftrace_commands, list) { if (strcmp(p->name, command) == 0) { diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1122f151466f..091e801145c9 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6881,6 +6881,9 @@ ftrace_trace_snapshot_callback(struct trace_array *tr, struct ftrace_hash *hash, char *number; int ret; + if (!tr) + return -ENODEV; + /* hash funcs only work with set_ftrace_filter */ if (!enable) return -EINVAL; diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index a3bddbfd0874..a0910c0cdf2e 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -654,6 +654,9 @@ ftrace_trace_onoff_callback(struct trace_array *tr, struct ftrace_hash *hash, { struct ftrace_probe_ops *ops; + if (!tr) + return -ENODEV; + /* we register both traceon and traceoff to this callback */ if (strcmp(cmd, "traceon") == 0) ops = param ? &traceon_count_probe_ops : &traceon_probe_ops; @@ -670,6 +673,9 @@ ftrace_stacktrace_callback(struct trace_array *tr, struct ftrace_hash *hash, { struct ftrace_probe_ops *ops; + if (!tr) + return -ENODEV; + ops = param ? &stacktrace_count_probe_ops : &stacktrace_probe_ops; return ftrace_trace_probe_callback(tr, ops, hash, glob, cmd, @@ -682,6 +688,9 @@ ftrace_dump_callback(struct trace_array *tr, struct ftrace_hash *hash, { struct ftrace_probe_ops *ops; + if (!tr) + return -ENODEV; + ops = &dump_probe_ops; /* Only dump once. */ @@ -695,6 +704,9 @@ ftrace_cpudump_callback(struct trace_array *tr, struct ftrace_hash *hash, { struct ftrace_probe_ops *ops; + if (!tr) + return -ENODEV; + ops = &cpudump_probe_ops; /* Only dump once. */ diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c index 76aa04d4c925..b4a751e8f9d6 100644 --- a/kernel/trace/trace_stack.c +++ b/kernel/trace/trace_stack.c @@ -409,7 +409,9 @@ static const struct file_operations stack_trace_fops = { static int stack_trace_filter_open(struct inode *inode, struct file *file) { - return ftrace_regex_open(&trace_ops, FTRACE_ITER_FILTER, + struct ftrace_ops *ops = inode->i_private; + + return ftrace_regex_open(ops, FTRACE_ITER_FILTER, inode, file); } @@ -476,7 +478,7 @@ static __init int stack_trace_init(void) NULL, &stack_trace_fops); trace_create_file("stack_trace_filter", 0444, d_tracer, - NULL, &stack_trace_filter_fops); + &trace_ops, &stack_trace_filter_fops); if (stack_trace_filter_buf[0]) ftrace_set_early_filter(&trace_ops, stack_trace_filter_buf, 1); From 713a98d90c5ea072c1bb00ef40617aee2cef2232 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 28 Jun 2017 09:51:03 +0800 Subject: [PATCH 1033/1065] virtio-net: serialize tx routine during reset We don't hold any tx lock when trying to disable TX during reset, this would lead a use after free since ndo_start_xmit() tries to access the virtqueue which has already been freed. Fix this by using netif_tx_disable() before freeing the vqs, this could make sure no tx after vq freeing. Reported-by: Jean-Philippe Menil Tested-by: Jean-Philippe Menil Fixes commit f600b6905015 ("virtio_net: Add XDP support") Cc: John Fastabend Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Acked-by: Robert McCabe Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index a871f45ecc79..143d8a95a60d 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1797,6 +1797,7 @@ static void virtnet_freeze_down(struct virtio_device *vdev) flush_work(&vi->config_work); netif_device_detach(vi->dev); + netif_tx_disable(vi->dev); cancel_delayed_work_sync(&vi->refill); if (netif_running(vi->dev)) { From c1a4872ebfb83b1af7144f7b29ac8c4b344a12a8 Mon Sep 17 00:00:00 2001 From: Gao Feng Date: Wed, 28 Jun 2017 12:53:54 +0800 Subject: [PATCH 1034/1065] net: sched: Fix one possible panic when no destroy callback When qdisc fail to init, qdisc_create would invoke the destroy callback to cleanup. But there is no check if the callback exists really. So it would cause the panic if there is no real destroy callback like the qdisc codel, fq, and so on. Take codel as an example following: When a malicious user constructs one invalid netlink msg, it would cause codel_init->codel_change->nla_parse_nested failed. Then kernel would invoke the destroy callback directly but qdisc codel doesn't define one. It causes one panic as a result. Now add one the check for destroy to avoid the possible panic. Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Signed-off-by: Gao Feng Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_api.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index e88342fde1bc..cfdbfa18a95e 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -1019,7 +1019,8 @@ static struct Qdisc *qdisc_create(struct net_device *dev, return sch; } /* ops->init() failed, we call ->destroy() like qdisc_create_dflt() */ - ops->destroy(sch); + if (ops->destroy) + ops->destroy(sch); err_out3: dev_put(dev); kfree((char *) sch - sch->padded); From 6b27c8adf27edf1dabe2cdcfaa101ef7e2712415 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 28 Jun 2017 09:03:12 +0300 Subject: [PATCH 1035/1065] mlxsw: spectrum_router: Fix NULL pointer dereference In case a VLAN device is enslaved to a bridge we shouldn't create a router interface (RIF) for it when it's configured with an IP address. This is already handled by the driver for other types of netdevs, such as physical ports and LAG devices. If this IP address is then removed and the interface is subsequently unlinked from the bridge, a NULL pointer dereference can happen, as the original 802.1d FID was replaced with an rFID which was then deleted. To reproduce: $ ip link set dev enp3s0np9 up $ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111 $ ip link set dev enp3s0np9.111 up $ ip link add name br0 type bridge $ ip link set dev br0 up $ ip link set enp3s0np9.111 master br0 $ ip address add dev enp3s0np9.111 192.168.0.1/24 $ ip address del dev enp3s0np9.111 192.168.0.1/24 $ ip link set dev enp3s0np9.111 nomaster Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel Reported-by: Petr Machata Tested-by: Petr Machata Reviewed-by: Petr Machata Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 9f89c4137d21..0744452a0b18 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -3334,6 +3334,9 @@ static int mlxsw_sp_inetaddr_vlan_event(struct net_device *vlan_dev, struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(vlan_dev); u16 vid = vlan_dev_vlan_id(vlan_dev); + if (netif_is_bridge_port(vlan_dev)) + return 0; + if (mlxsw_sp_port_dev_check(real_dev)) return mlxsw_sp_inetaddr_vport_event(vlan_dev, real_dev, event, vid); From acb4b7df48b539cb391287921de57e4e5fae3460 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 28 Jun 2017 14:44:21 +0300 Subject: [PATCH 1036/1065] rocker: move dereference before free My static checker complains that ofdpa_neigh_del() can sometimes free "found". It just makes sense to use it first before deleting it. Fixes: ecf244f753e0 ("rocker: fix maybe-uninitialized warning") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/rocker/rocker_ofdpa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/rocker/rocker_ofdpa.c b/drivers/net/ethernet/rocker/rocker_ofdpa.c index 2ae852454780..a9ce82d3e9cf 100644 --- a/drivers/net/ethernet/rocker/rocker_ofdpa.c +++ b/drivers/net/ethernet/rocker/rocker_ofdpa.c @@ -1505,8 +1505,8 @@ static int ofdpa_port_ipv4_nh(struct ofdpa_port *ofdpa_port, *index = entry->index; resolved = false; } else if (removing) { - ofdpa_neigh_del(trans, found); *index = found->index; + ofdpa_neigh_del(trans, found); } else if (updating) { ofdpa_neigh_update(found, trans, NULL, false); resolved = !is_zero_ether_addr(found->eth_dst); From 5b85840320151f61e04d83a23ef2567a07094503 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 28 Jun 2017 18:28:33 +0200 Subject: [PATCH 1037/1065] arcnet: change irq handler to lock irqsave This patch prevents the arcnet driver from the following deadlock. [ 41.273910] ====================================================== [ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted [ 41.292366] ------------------------------------------------------ [ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: [ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.315199] [ 41.315199] and this task is already holding: [ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [] packet_direct_xmit+0xfc/0x1c8 [ 41.329593] which would create a new lock dependency: [ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...} [ 41.341801] [ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 41.350108] (_xmit_ARCNET#2){+.-...} ... which became SOFTIRQ-irq-safe at: [ 41.357539] [] _raw_spin_lock+0x30/0x40 [ 41.362677] [] dev_watchdog+0x5c/0x264 [ 41.367723] [] call_timer_fn+0x6c/0xf4 [ 41.372759] [] run_timer_softirq+0x154/0x210 [ 41.378340] [] __do_softirq+0x144/0x298 [ 41.383469] [] irq_exit+0xcc/0x130 [ 41.388138] [] __handle_domain_irq+0x60/0xb4 [ 41.393728] [] __irq_svc+0x58/0x78 [ 41.398402] [] arch_cpu_idle+0x24/0x3c [ 41.403443] [] cpu_startup_entry+0x1f8/0x25c [ 41.409029] [] start_kernel+0x3c0/0x3cc [ 41.414170] [ 41.414170] to a SOFTIRQ-irq-unsafe lock: [ 41.419931] (&(&lp->lock)->rlock){+.+...} ... which became SOFTIRQ-irq-unsafe at: [ 41.427996] ... [] _raw_spin_lock+0x30/0x40 [ 41.433409] [] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.439646] [] handle_nested_irq+0x8c/0xec [ 41.445063] [] regmap_irq_thread+0x190/0x314 [ 41.450661] [] irq_thread_fn+0x1c/0x34 [ 41.455700] [] irq_thread+0x13c/0x1dc [ 41.460649] [] kthread+0xe4/0xf8 [ 41.465158] [] ret_from_fork+0x14/0x24 [ 41.470207] [ 41.470207] other info that might help us debug this: [ 41.470207] [ 41.478627] Possible interrupt unsafe locking scenario: [ 41.478627] [ 41.485763] CPU0 CPU1 [ 41.490521] ---- ---- [ 41.495279] lock(&(&lp->lock)->rlock); [ 41.499414] local_irq_disable(); [ 41.505636] lock(_xmit_ARCNET#2); [ 41.511967] lock(&(&lp->lock)->rlock); [ 41.518741] [ 41.521490] lock(_xmit_ARCNET#2); [ 41.525356] [ 41.525356] *** DEADLOCK *** [ 41.525356] [ 41.531587] 1 lock held by arcecho/233: [ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [] packet_direct_xmit+0xfc/0x1c8 [ 41.544355] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 { [ 41.557357] HARDIRQ-ON-W at: [ 41.560664] [] _raw_spin_lock+0x30/0x40 [ 41.567445] [] dev_deactivate_many+0x114/0x304 [ 41.574866] [] dev_deactivate+0x24/0x38 [ 41.581646] [] linkwatch_do_dev+0x40/0x74 [ 41.588613] [] __linkwatch_run_queue+0xec/0x140 [ 41.596120] [] linkwatch_event+0x2c/0x34 [ 41.602991] [] process_one_work+0x188/0x40c [ 41.610131] [] worker_thread+0x4c/0x480 [ 41.616912] [] kthread+0xe4/0xf8 [ 41.623048] [] ret_from_fork+0x14/0x24 [ 41.629735] IN-SOFTIRQ-W at: [ 41.633039] [] _raw_spin_lock+0x30/0x40 [ 41.639820] [] dev_watchdog+0x5c/0x264 [ 41.646508] [] call_timer_fn+0x6c/0xf4 [ 41.653190] [] run_timer_softirq+0x154/0x210 [ 41.660425] [] __do_softirq+0x144/0x298 [ 41.667201] [] irq_exit+0xcc/0x130 [ 41.673518] [] __handle_domain_irq+0x60/0xb4 [ 41.680754] [] __irq_svc+0x58/0x78 [ 41.687077] [] arch_cpu_idle+0x24/0x3c [ 41.693769] [] cpu_startup_entry+0x1f8/0x25c [ 41.701006] [] start_kernel+0x3c0/0x3cc [ 41.707791] INITIAL USE at: [ 41.711003] [] _raw_spin_lock+0x30/0x40 [ 41.717696] [] dev_deactivate_many+0x114/0x304 [ 41.725026] [] dev_deactivate+0x24/0x38 [ 41.731718] [] linkwatch_do_dev+0x40/0x74 [ 41.738593] [] __linkwatch_run_queue+0xec/0x140 [ 41.746011] [] linkwatch_event+0x2c/0x34 [ 41.752789] [] process_one_work+0x188/0x40c [ 41.759847] [] worker_thread+0x4c/0x480 [ 41.766541] [] kthread+0xe4/0xf8 [ 41.772596] [] ret_from_fork+0x14/0x24 [ 41.779198] } [ 41.780945] ... key at: [] netdev_xmit_lock_key+0x38/0x1c8 [ 41.788192] ... acquired at: [ 41.791309] [] lock_acquire+0x70/0x90 [ 41.796361] [] _raw_spin_lock_irqsave+0x40/0x54 [ 41.802324] [] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.808844] [] packet_direct_xmit+0x130/0x1c8 [ 41.814622] [] packet_sendmsg+0x3b8/0x680 [ 41.820034] [] sock_sendmsg+0x14/0x24 [ 41.825091] [] SyS_sendto+0xb8/0xe0 [ 41.829956] [] SyS_send+0x18/0x20 [ 41.834638] [] ret_fast_syscall+0x0/0x1c [ 41.839954] [ 41.841514] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 { [ 41.855644] HARDIRQ-ON-W at: [ 41.858945] [] _raw_spin_lock+0x30/0x40 [ 41.865726] [] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.873607] [] handle_nested_irq+0x8c/0xec [ 41.880666] [] regmap_irq_thread+0x190/0x314 [ 41.887901] [] irq_thread_fn+0x1c/0x34 [ 41.894593] [] irq_thread+0x13c/0x1dc [ 41.901195] [] kthread+0xe4/0xf8 [ 41.907338] [] ret_from_fork+0x14/0x24 [ 41.914025] SOFTIRQ-ON-W at: [ 41.917328] [] _raw_spin_lock+0x30/0x40 [ 41.924106] [] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.931981] [] handle_nested_irq+0x8c/0xec [ 41.939028] [] regmap_irq_thread+0x190/0x314 [ 41.946264] [] irq_thread_fn+0x1c/0x34 [ 41.952954] [] irq_thread+0x13c/0x1dc [ 41.959548] [] kthread+0xe4/0xf8 [ 41.965689] [] ret_from_fork+0x14/0x24 [ 41.972379] INITIAL USE at: [ 41.975595] [] _raw_spin_lock+0x30/0x40 [ 41.982283] [] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.990063] [] handle_nested_irq+0x8c/0xec [ 41.997027] [] regmap_irq_thread+0x190/0x314 [ 42.004172] [] irq_thread_fn+0x1c/0x34 [ 42.010766] [] irq_thread+0x13c/0x1dc [ 42.017267] [] kthread+0xe4/0xf8 [ 42.023314] [] ret_from_fork+0x14/0x24 [ 42.029903] } [ 42.031648] ... key at: [] __key.42091+0x0/0xfffff0f8 [arcnet] [ 42.039255] ... acquired at: [ 42.042372] [] lock_acquire+0x70/0x90 [ 42.047413] [] _raw_spin_lock_irqsave+0x40/0x54 [ 42.053364] [] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 42.059872] [] packet_direct_xmit+0x130/0x1c8 [ 42.065634] [] packet_sendmsg+0x3b8/0x680 [ 42.071030] [] sock_sendmsg+0x14/0x24 [ 42.076069] [] SyS_sendto+0xb8/0xe0 [ 42.080926] [] SyS_send+0x18/0x20 [ 42.085601] [] ret_fast_syscall+0x0/0x1c [ 42.090918] [ 42.092481] [ 42.092481] stack backtrace: [ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536 [ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree) [ 42.111183] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 42.119337] [] (show_stack) from [] (dump_stack+0x8c/0x9c) [ 42.126937] [] (dump_stack) from [] (check_usage+0x4bc/0x63c) [ 42.134815] [] (check_usage) from [] (check_irq_usage+0x58/0xb0) [ 42.142964] [] (check_irq_usage) from [] (__lock_acquire+0x1524/0x20b0) [ 42.151740] [] (__lock_acquire) from [] (lock_acquire+0x70/0x90) [ 42.159886] [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x40/0x54) [ 42.168768] [] (_raw_spin_lock_irqsave) from [] (arcnet_send_packet+0x60/0x1c0 [arcnet]) [ 42.179115] [] (arcnet_send_packet [arcnet]) from [] (packet_direct_xmit+0x130/0x1c8) [ 42.189182] [] (packet_direct_xmit) from [] (packet_sendmsg+0x3b8/0x680) [ 42.198059] [] (packet_sendmsg) from [] (sock_sendmsg+0x14/0x24) [ 42.206199] [] (sock_sendmsg) from [] (SyS_sendto+0xb8/0xe0) [ 42.213978] [] (SyS_sendto) from [] (SyS_send+0x18/0x20) [ 42.221388] [] (SyS_send) from [] (ret_fast_syscall+0x0/0x1c) Signed-off-by: Michael Grzeschik --- v1 -> v2: removed unneeded zero assignment of flags Signed-off-by: David S. Miller --- drivers/net/arcnet/arcnet.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index 62ee439d5882..53a1cb551def 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -756,6 +756,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) struct net_device *dev = dev_id; struct arcnet_local *lp; int recbuf, status, diagstatus, didsomething, boguscount; + unsigned long flags; int retval = IRQ_NONE; arc_printk(D_DURING, dev, "\n"); @@ -765,7 +766,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) lp = netdev_priv(dev); BUG_ON(!lp); - spin_lock(&lp->lock); + spin_lock_irqsave(&lp->lock, flags); /* RESET flag was enabled - if device is not running, we must * clear it right away (but nothing else). @@ -774,7 +775,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) if (lp->hw.status(dev) & RESETflag) lp->hw.command(dev, CFLAGScmd | RESETclear); lp->hw.intmask(dev, 0); - spin_unlock(&lp->lock); + spin_unlock_irqrestore(&lp->lock, flags); return retval; } @@ -998,7 +999,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) udelay(1); lp->hw.intmask(dev, lp->intmask); - spin_unlock(&lp->lock); + spin_unlock_irqrestore(&lp->lock, flags); return retval; } EXPORT_SYMBOL(arcnet_interrupt); From 06908d7aee8d62a80cabfd134d0354dc4d2794bc Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 28 Jun 2017 18:28:34 +0200 Subject: [PATCH 1038/1065] Trivial fix to spelling mistake in arc_printk message Signed-off-by: Colin Ian King Signed-off-by: Michael Grzeschik Signed-off-by: David S. Miller --- drivers/net/arcnet/capmode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c index 2056878fb087..4fa2e46b48d3 100644 --- a/drivers/net/arcnet/capmode.c +++ b/drivers/net/arcnet/capmode.c @@ -212,7 +212,7 @@ static int ack_tx(struct net_device *dev, int acked) ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */ ackpkt->soft.cap.mes.ack = acked; - arc_printk(D_PROTO, dev, "Ackknowledge for cap packet %x.\n", + arc_printk(D_PROTO, dev, "Acknowledge for cap packet %x.\n", *((int *)&ackpkt->soft.cap.cookie[0])); ackskb->protocol = cpu_to_be16(ETH_P_ARCNET); From 0d494fcf867f95040b5b67e4bc5af739bcda37da Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 28 Jun 2017 18:28:35 +0200 Subject: [PATCH 1039/1065] arcnet: com20020: remove needless base_addr assignment The assignment is superfluous. Signed-off-by: Michael Grzeschik Signed-off-by: David S. Miller --- drivers/net/arcnet/com20020.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c index 13d9ad4b3f5c..78043a9c5981 100644 --- a/drivers/net/arcnet/com20020.c +++ b/drivers/net/arcnet/com20020.c @@ -246,8 +246,6 @@ int com20020_found(struct net_device *dev, int shared) return -ENODEV; } - dev->base_addr = ioaddr; - arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n", lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq); From cb108619f2fc77846bf7a7543517f3487f455b24 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 28 Jun 2017 18:28:36 +0200 Subject: [PATCH 1040/1065] arcnet: com20020-pci: fix dev_id calculation The dev_id was miscalculated. Only the two bits 4-5 are relevant for the MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection. Signed-off-by: Michael Grzeschik Signed-off-by: David S. Miller --- drivers/net/arcnet/com20020-pci.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index 239de38fbd6a..fec2df2c869f 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -135,6 +135,7 @@ static int com20020pci_probe(struct pci_dev *pdev, for (i = 0; i < ci->devcount; i++) { struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i]; struct com20020_dev *card; + int dev_id_mask = 0xf; dev = alloc_arcdev(device); if (!dev) { @@ -179,8 +180,8 @@ static int com20020pci_probe(struct pci_dev *pdev, /* Get the dev_id from the PLX rotary coder */ if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) - dev->dev_id = 0xc; - dev->dev_id ^= inb(priv->misc + ci->rotary) >> 4; + dev_id_mask = 0x3; + dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask; snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); From 2a0ea04c83ab82c3852c9171d2fa5cd9a1432c9b Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 28 Jun 2017 18:28:37 +0200 Subject: [PATCH 1041/1065] arcnet: com20020-pci: add missing pdev setup in netdev structure We add the pdev data to the pci devices netdev structure. This way the interface get consistent device names in the userspace (udev). Signed-off-by: Michael Grzeschik Signed-off-by: David S. Miller --- drivers/net/arcnet/com20020-pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index fec2df2c869f..47f80b83dcf4 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -167,6 +167,7 @@ static int com20020pci_probe(struct pci_dev *pdev, arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND); arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT); + SET_NETDEV_DEV(dev, &pdev->dev); dev->base_addr = ioaddr; dev->dev_addr[0] = node; dev->irq = pdev->irq; From 80c65fdb4c6920e332a9781a3de5877594b07522 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Thu, 29 Jun 2017 12:09:26 -0700 Subject: [PATCH 1042/1065] perf/x86/intel/uncore: Fix wrong box pointer check Should not init a NULL box. It will cause system crash. The issue looks like caused by a typo. This was not noticed because there is no NULL box. Also, for most boxes, they are enabled by default. The init code is not critical. Fixes: fff4b87e594a ("perf/x86/intel/uncore: Make package handling more robust") Signed-off-by: Kan Liang Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170629190926.2456-1-kan.liang@intel.com --- arch/x86/events/intel/uncore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c index 758c1aa5009d..44ec523287f6 100644 --- a/arch/x86/events/intel/uncore.c +++ b/arch/x86/events/intel/uncore.c @@ -1170,7 +1170,7 @@ static int uncore_event_cpu_online(unsigned int cpu) pmu = type->pmus; for (i = 0; i < type->num_boxes; i++, pmu++) { box = pmu->boxes[pkg]; - if (!box && atomic_inc_return(&box->refcnt) == 1) + if (box && atomic_inc_return(&box->refcnt) == 1) uncore_box_init(box); } } From 6bdf6abc56b53103324dfd270a86580306e1a232 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 29 Jun 2017 03:04:59 +0200 Subject: [PATCH 1043/1065] bpf: prevent leaking pointer via xadd on unpriviledged Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs") Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Acked-by: Martin KaFai Lau Acked-by: Edward Cree Signed-off-by: David S. Miller --- kernel/bpf/verifier.c | 5 ++ tools/testing/selftests/bpf/test_verifier.c | 66 +++++++++++++++++++++ 2 files changed, 71 insertions(+) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 339c8a1371de..a8a725697bed 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -989,6 +989,11 @@ static int check_xadd(struct bpf_verifier_env *env, struct bpf_insn *insn) if (err) return err; + if (is_pointer_value(env, insn->src_reg)) { + verbose("R%d leaks addr into mem\n", insn->src_reg); + return -EACCES; + } + /* check whether atomic_add can read the memory */ err = check_mem_access(env, insn->dst_reg, insn->off, BPF_SIZE(insn->code), BPF_READ, -1); diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c index cabb19b1e371..0ff8c55c0464 100644 --- a/tools/testing/selftests/bpf/test_verifier.c +++ b/tools/testing/selftests/bpf/test_verifier.c @@ -3748,6 +3748,72 @@ static struct bpf_test tests[] = { .result = REJECT, .errstr = "invalid bpf_context access", }, + { + "leak pointer into ctx 1", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, + offsetof(struct __sk_buff, cb[0])), + BPF_LD_MAP_FD(BPF_REG_2, 0), + BPF_STX_XADD(BPF_DW, BPF_REG_1, BPF_REG_2, + offsetof(struct __sk_buff, cb[0])), + BPF_EXIT_INSN(), + }, + .fixup_map1 = { 2 }, + .errstr_unpriv = "R2 leaks addr into mem", + .result_unpriv = REJECT, + .result = ACCEPT, + }, + { + "leak pointer into ctx 2", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, + offsetof(struct __sk_buff, cb[0])), + BPF_STX_XADD(BPF_DW, BPF_REG_1, BPF_REG_10, + offsetof(struct __sk_buff, cb[0])), + BPF_EXIT_INSN(), + }, + .errstr_unpriv = "R10 leaks addr into mem", + .result_unpriv = REJECT, + .result = ACCEPT, + }, + { + "leak pointer into ctx 3", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_LD_MAP_FD(BPF_REG_2, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_2, + offsetof(struct __sk_buff, cb[0])), + BPF_EXIT_INSN(), + }, + .fixup_map1 = { 1 }, + .errstr_unpriv = "R2 leaks addr into ctx", + .result_unpriv = REJECT, + .result = ACCEPT, + }, + { + "leak pointer into map val", + .insns = { + BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 3), + BPF_MOV64_IMM(BPF_REG_3, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_3, 0), + BPF_STX_XADD(BPF_DW, BPF_REG_0, BPF_REG_6, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map1 = { 4 }, + .errstr_unpriv = "R6 leaks addr into mem", + .result_unpriv = REJECT, + .result = ACCEPT, + }, { "helper access to map: full range", .insns = { From e44699d2c28067f69698ccb68dd3ddeacfebc434 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Thu, 29 Jun 2017 11:13:36 +0200 Subject: [PATCH 1044/1065] net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish() Recently I started seeing warnings about pages with refcount -1. The problem was traced to packets being reused after their head was merged into a GRO packet by skb_gro_receive(). While bisecting the issue pointed to commit c21b48cc1bbf ("net: adjust skb->truesize in ___pskb_trim()") and I have never seen it on a kernel with it reverted, I believe the real problem appeared earlier when the option to merge head frag in GRO was implemented. Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE branch of napi_skb_finish() so that if the driver uses napi_gro_frags() and head is merged (which in my case happens after the skb_condense() call added by the commit mentioned above), the skb is reused including the head that has been merged. As a result, we release the page reference twice and eventually end up with negative page refcount. To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish() the same way it's done in napi_skb_finish(). Fixes: d7e8883cfcf4 ("net: make GRO aware of skb->head_frag") Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller --- net/core/dev.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 91bb55070533..416137c64bf8 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4767,6 +4767,13 @@ struct packet_offload *gro_find_complete_by_type(__be16 type) } EXPORT_SYMBOL(gro_find_complete_by_type); +static void napi_skb_free_stolen_head(struct sk_buff *skb) +{ + skb_dst_drop(skb); + secpath_reset(skb); + kmem_cache_free(skbuff_head_cache, skb); +} + static gro_result_t napi_skb_finish(gro_result_t ret, struct sk_buff *skb) { switch (ret) { @@ -4780,13 +4787,10 @@ static gro_result_t napi_skb_finish(gro_result_t ret, struct sk_buff *skb) break; case GRO_MERGED_FREE: - if (NAPI_GRO_CB(skb)->free == NAPI_GRO_FREE_STOLEN_HEAD) { - skb_dst_drop(skb); - secpath_reset(skb); - kmem_cache_free(skbuff_head_cache, skb); - } else { + if (NAPI_GRO_CB(skb)->free == NAPI_GRO_FREE_STOLEN_HEAD) + napi_skb_free_stolen_head(skb); + else __kfree_skb(skb); - } break; case GRO_HELD: @@ -4858,10 +4862,16 @@ static gro_result_t napi_frags_finish(struct napi_struct *napi, break; case GRO_DROP: - case GRO_MERGED_FREE: napi_reuse_skb(napi, skb); break; + case GRO_MERGED_FREE: + if (NAPI_GRO_CB(skb)->free == NAPI_GRO_FREE_STOLEN_HEAD) + napi_skb_free_stolen_head(skb); + else + napi_reuse_skb(napi, skb); + break; + case GRO_MERGED: case GRO_CONSUMED: break; From d58299a478c416c0b48e4b31c6332fe7beb63000 Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Thu, 29 Jun 2017 16:50:06 +0100 Subject: [PATCH 1045/1065] sfc: fix attempt to translate invalid filter ID When filter insertion fails with no rollback, we were trying to convert EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus filter ID of 0x1fff, neither of which is a good thing. Fixes: 0ccb998bf46d ("sfc: fix filter_id misinterpretation in edge case") Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index a8089667fc5b..78f9e43420e0 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -5105,6 +5105,7 @@ static int efx_ef10_filter_insert_addr_list(struct efx_nic *efx, /* Insert/renew filters */ for (i = 0; i < addr_count; i++) { + EFX_WARN_ON_PARANOID(ids[i] != EFX_EF10_FILTER_ID_INVALID); efx_filter_init_rx(&spec, EFX_FILTER_PRI_AUTO, filter_flags, 0); efx_filter_set_eth_local(&spec, vlan->vid, addr_list[i].addr); rc = efx_ef10_filter_insert(efx, &spec, true); @@ -5122,11 +5123,11 @@ static int efx_ef10_filter_insert_addr_list(struct efx_nic *efx, } return rc; } else { - /* mark as not inserted, and carry on */ - rc = EFX_EF10_FILTER_ID_INVALID; + /* keep invalid ID, and carry on */ } + } else { + ids[i] = efx_ef10_filter_get_unsafe_id(rc); } - ids[i] = efx_ef10_filter_get_unsafe_id(rc); } if (multicast && rollback) { From 9e25ebfe56ece7541cd10a20d715cbdd148a2e06 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Thu, 29 Jun 2017 18:41:36 +0100 Subject: [PATCH 1046/1065] ARM: 8685/1: ensure memblock-limit is pmd-aligned The pmd containing memblock_limit is cleared by prepare_page_table() which creates the opportunity for early_alloc() to allocate unmapped memory if memblock_limit is not pmd aligned causing a boot-time hang. Commit 965278dcb8ab ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") attempted to resolve this problem, but there is a path through the adjust_lowmem_bounds() routine where if all memory regions start and end on pmd-aligned addresses the memblock_limit will be set to arm_lowmem_limit. Since arm_lowmem_limit can be affected by the vmalloc early parameter, the value of arm_lowmem_limit may not be pmd-aligned. This commit corrects this oversight such that memblock_limit is always rounded down to pmd-alignment. Fixes: 965278dcb8ab ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") Signed-off-by: Doug Berger Suggested-by: Mark Rutland Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 31af3cb59a60..e46a6a446cdd 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1218,15 +1218,15 @@ void __init adjust_lowmem_bounds(void) high_memory = __va(arm_lowmem_limit - 1) + 1; + if (!memblock_limit) + memblock_limit = arm_lowmem_limit; + /* * Round the memblock limit down to a pmd size. This * helps to ensure that we will allocate memory from the * last full pmd, which should be mapped. */ - if (memblock_limit) - memblock_limit = round_down(memblock_limit, PMD_SIZE); - if (!memblock_limit) - memblock_limit = arm_lowmem_limit; + memblock_limit = round_down(memblock_limit, PMD_SIZE); if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) { if (memblock_end_of_DRAM() > arm_lowmem_limit) { From 161c51ccb7a6faf45ffe09aa5cf1ad85ccdad503 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 2 Mar 2017 14:02:40 -0800 Subject: [PATCH 1047/1065] MIPS: pm-cps: Drop manual cache-line alignment of ready_count We allocate memory for a ready_count variable per-CPU, which is accessed via a cached non-coherent TLB mapping to perform synchronisation between threads within the core using LL/SC instructions. In order to ensure that the variable is contained within its own data cache line we allocate 2 lines worth of memory & align the resulting pointer to a line boundary. This is however unnecessary, since kmalloc is guaranteed to return memory which is at least cache-line aligned (see ARCH_DMA_MINALIGN). Stop the redundant manual alignment. Besides cleaning up the code & avoiding needless work, this has the side effect of avoiding an arithmetic error found by Bryan on 64 bit systems due to the 32 bit size of the former dlinesz. This led the ready_count variable to have its upper 32b cleared erroneously for MIPS64 kernels, causing problems when ready_count was later used on MIPS64 via cpuidle. Signed-off-by: Paul Burton Fixes: 3179d37ee1ed ("MIPS: pm-cps: add PM state entry code for CPS systems") Reported-by: Bryan O'Donoghue Reviewed-by: Bryan O'Donoghue Tested-by: Bryan O'Donoghue Cc: linux-mips@linux-mips.org Cc: stable # v3.16+ Patchwork: https://patchwork.linux-mips.org/patch/15383/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/pm-cps.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c index 5f928c34c148..d99416094ba9 100644 --- a/arch/mips/kernel/pm-cps.c +++ b/arch/mips/kernel/pm-cps.c @@ -56,7 +56,6 @@ DECLARE_BITMAP(state_support, CPS_PM_STATE_COUNT); * state. Actually per-core rather than per-CPU. */ static DEFINE_PER_CPU_ALIGNED(u32*, ready_count); -static DEFINE_PER_CPU_ALIGNED(void*, ready_count_alloc); /* Indicates online CPUs coupled with the current CPU */ static DEFINE_PER_CPU_ALIGNED(cpumask_t, online_coupled); @@ -642,7 +641,6 @@ static int cps_pm_online_cpu(unsigned int cpu) { enum cps_pm_state state; unsigned core = cpu_data[cpu].core; - unsigned dlinesz = cpu_data[cpu].dcache.linesz; void *entry_fn, *core_rc; for (state = CPS_PM_NC_WAIT; state < CPS_PM_STATE_COUNT; state++) { @@ -662,16 +660,11 @@ static int cps_pm_online_cpu(unsigned int cpu) } if (!per_cpu(ready_count, core)) { - core_rc = kmalloc(dlinesz * 2, GFP_KERNEL); + core_rc = kmalloc(sizeof(u32), GFP_KERNEL); if (!core_rc) { pr_err("Failed allocate core %u ready_count\n", core); return -ENOMEM; } - per_cpu(ready_count_alloc, core) = core_rc; - - /* Ensure ready_count is aligned to a cacheline boundary */ - core_rc += dlinesz - 1; - core_rc = (void *)((unsigned long)core_rc & ~(dlinesz - 1)); per_cpu(ready_count, core) = core_rc; } From d8550860d910c6b7b70f830f59003b33daaa52c9 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 3 Mar 2017 15:26:05 -0800 Subject: [PATCH 1048/1065] MIPS: Fix IRQ tracing & lockdep when rescheduling When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty #197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [] show_stack+0x80/0xa8 [ 50.086577] [] dump_stack+0x10c/0x190 [ 50.093498] [] __warn+0xf0/0x108 [ 50.099889] [] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [] lock_is_held_type+0x8c/0xb0 [ 50.122291] [] __schedule+0x8c0/0x10f8 [ 50.129221] [] schedule+0x30/0x98 [ 50.135659] [] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Cc: stable Patchwork: https://patchwork.linux-mips.org/patch/15385/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 8d83fc2a96b7..38a302919e6b 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -119,6 +120,7 @@ work_pending: andi t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS beqz t0, work_notifysig work_resched: + TRACE_IRQS_OFF jal schedule local_irq_disable # make sure need_resched and @@ -155,6 +157,7 @@ syscall_exit_work: beqz t0, work_pending # trace bit set? local_irq_enable # could let syscall_trace_leave() # call schedule() instead + TRACE_IRQS_ON move a0, sp jal syscall_trace_leave b resume_userspace From cad482c1b1844136fc6d9e33f10d3386344fb045 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 13 Jun 2017 10:01:08 -0700 Subject: [PATCH 1049/1065] MIPS: Perform post-DMA cache flushes on systems with MAARs Recent CPUs from Imagination Technologies such as the I6400 or P6600 are able to speculatively fetch data from memory into caches. This means that if used in a system with non-coherent DMA they require that caches be invalidated after a device performs DMA, and before the CPU reads the DMA'd data, in order to ensure that stale values weren't speculatively prefetched. Such CPUs also introduced Memory Accessibility Attribute Registers (MAARs) in order to control the regions in which they are allowed to speculate. Thus we can use the presence of MAARs as a good indication that the CPU requires the above cache maintenance. Use the presence of MAARs to determine the result of cpu_needs_post_dma_flush() in the default case, in order to handle these recent CPUs correctly. Note that the return type of cpu_needs_post_dma_flush() is changed to bool, such that it's clearer what's happening when cpu_has_maar is cast to bool for the return value. If this patch were backported to a pre-v4.7 kernel then MIPS_CPU_MAAR was 1ull<<34, so when cast to an int we would incorrectly return 0. It so happens that MIPS_CPU_MAAR is currently 1ull<<30, so when truncated to an int gives a non-zero value anyway, but even so the implicit conversion from long long int to bool makes it clearer to understand what will happen than the implicit conversion from long long int to int would. The bool return type also fits this usage better semantically, so seems like an all-round win. Thanks to Ed for spotting the issue for pre-v4.7 kernels & suggesting the return type change. Signed-off-by: Paul Burton Reviewed-by: Bryan O'Donoghue Tested-by: Bryan O'Donoghue Cc: Ed Blake Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16363/ Signed-off-by: Ralf Baechle --- arch/mips/mm/dma-default.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index fe8df14b6169..e08598c70b3e 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -68,12 +68,25 @@ static inline struct page *dma_addr_to_page(struct device *dev, * systems and only the R10000 and R12000 are used in such systems, the * SGI IP28 Indigo² rsp. SGI IP32 aka O2. */ -static inline int cpu_needs_post_dma_flush(struct device *dev) +static inline bool cpu_needs_post_dma_flush(struct device *dev) { - return !plat_device_is_coherent(dev) && - (boot_cpu_type() == CPU_R10000 || - boot_cpu_type() == CPU_R12000 || - boot_cpu_type() == CPU_BMIPS5000); + if (plat_device_is_coherent(dev)) + return false; + + switch (boot_cpu_type()) { + case CPU_R10000: + case CPU_R12000: + case CPU_BMIPS5000: + return true; + + default: + /* + * Presence of MAARs suggests that the CPU supports + * speculatively prefetching data, and therefore requires + * the post-DMA flush/invalidate. + */ + return cpu_has_maar; + } } static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp) From 854236363370995a609a10b03e35fd3dc5e9e4a1 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Thu, 29 Jun 2017 15:05:04 +0100 Subject: [PATCH 1050/1065] MIPS: Avoid accidental raw backtrace Since commit 81a76d7119f6 ("MIPS: Avoid using unwind_stack() with usermode") show_backtrace() invokes the raw backtracer when cp0_status & ST0_KSU indicates user mode to fix issues on EVA kernels where user and kernel address spaces overlap. However this is used by show_stack() which creates its own pt_regs on the stack and leaves cp0_status uninitialised in most of the code paths. This results in the non deterministic use of the raw back tracer depending on the previous stack content. show_stack() deals exclusively with kernel mode stacks anyway, so explicitly initialise regs.cp0_status to KSU_KERNEL (i.e. 0) to ensure we get a useful backtrace. Fixes: 81a76d7119f6 ("MIPS: Avoid using unwind_stack() with usermode") Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Cc: # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/16656/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 9681b5877140..38dfa27730ff 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -201,6 +201,8 @@ void show_stack(struct task_struct *task, unsigned long *sp) { struct pt_regs regs; mm_segment_t old_fs = get_fs(); + + regs.cp0_status = KSU_KERNEL; if (sp) { regs.regs[29] = (unsigned long)sp; regs.regs[31] = 0; From 9e52b32567126fe146f198971364f68d3bc5233f Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Thu, 22 Jun 2017 11:24:42 +0200 Subject: [PATCH 1051/1065] tracing/kprobes: Allow to create probe with a module name starting with a digit Always try to parse an address, since kstrtoul() will safely fail when given a symbol as input. If that fails (which will be the case for a symbol), try to parse a symbol instead. This allows creating a probe such as: p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0 Which is necessary for this command to work: perf probe -m 8021q -a vlan_gro_receive Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net Cc: stable@vger.kernel.org Fixes: 413d37d1e ("tracing: Add kprobe-based event tracer") Acked-by: Masami Hiramatsu Signed-off-by: Sabrina Dubroca Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_kprobe.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index c129fca6ec99..b53c8d369163 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -707,20 +707,16 @@ static int create_trace_kprobe(int argc, char **argv) pr_info("Probe point is not specified.\n"); return -EINVAL; } - if (isdigit(argv[1][0])) { - /* an address specified */ - ret = kstrtoul(&argv[1][0], 0, (unsigned long *)&addr); - if (ret) { - pr_info("Failed to parse address.\n"); - return ret; - } - } else { + + /* try to parse an address. if that fails, try to read the + * input as a symbol. */ + if (kstrtoul(argv[1], 0, (unsigned long *)&addr)) { /* a symbol specified */ symbol = argv[1]; /* TODO: support .init module functions */ ret = traceprobe_split_symbol_offset(symbol, &offset); if (ret) { - pr_info("Failed to parse symbol.\n"); + pr_info("Failed to parse either an address or a symbol.\n"); return ret; } if (offset && is_return && From b892cb873ced2af57dc5a018557d128c53ed6ae0 Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Tue, 27 Jun 2017 20:39:05 +0800 Subject: [PATCH 1052/1065] x86/boot/KASLR: Add checking for the offset of kernel virtual address randomization For kernel text KASLR, the virtual address is confined to area of 1G, [0xffffffff80000000, 0xffffffffc0000000). For the implemenataion of virtual address randomization, we only randomize to get an offset between 16M and 1G, then add this offset to the starting address, 0xffffffff80000000. Here 16M is the offset which is decided at linking stage. So the amount of the local variable 'virt_addr' which respresents the offset plus the kernel output size can not exceed KERNEL_IMAGE_SIZE. Add a debug check for the offset. If out of bounds, print error message and hang there. Suggested-by: Ingo Molnar Signed-off-by: Baoquan He Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1498567146-11990-2-git-send-email-bhe@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/misc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index b3c5a5f030ce..6008fa9b74d9 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -390,6 +390,8 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap, #ifdef CONFIG_X86_64 if (heap > 0x3fffffffffffUL) error("Destination address too large"); + if (virt_addr + max(output_len, kernel_total_size) > KERNEL_IMAGE_SIZE) + error("Destination virtual address is beyond the kernel mapping area"); #else if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); From 8eabf42ae5237e6b699aeac687b5b629e3537c8d Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Tue, 27 Jun 2017 20:39:06 +0800 Subject: [PATCH 1053/1065] x86/boot/KASLR: Fix kexec crash due to 'virt_addr' calculation bug Kernel text KASLR is separated into physical address and virtual address randomization. And for virtual address randomization, we only randomiza to get an offset between 16M and KERNEL_IMAGE_SIZE. So the initial value of 'virt_addr' should be LOAD_PHYSICAL_ADDR, but not the original kernel loading address 'output'. The bug will cause kernel boot failure if kernel is loaded at a different position than the address, 16M, which is decided at compiled time. Kexec/kdump is such practical case. To fix it, just assign LOAD_PHYSICAL_ADDR to virt_addr as initial value. Tested-by: Dave Young Signed-off-by: Baoquan He Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 8391c73 ("x86/KASLR: Randomize virtual address separately") Link: http://lkml.kernel.org/r/1498567146-11990-3-git-send-email-bhe@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/kaslr.c | 3 --- arch/x86/boot/compressed/misc.c | 4 ++-- arch/x86/boot/compressed/misc.h | 2 -- 3 files changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c index 54c24f0a43d3..56a7e9201741 100644 --- a/arch/x86/boot/compressed/kaslr.c +++ b/arch/x86/boot/compressed/kaslr.c @@ -564,9 +564,6 @@ void choose_random_location(unsigned long input, { unsigned long random_addr, min_addr; - /* By default, keep output position unchanged. */ - *virt_addr = *output; - if (cmdline_find_option_bool("nokaslr")) { warn("KASLR disabled: 'nokaslr' on cmdline."); return; diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 6008fa9b74d9..00241c815524 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -338,7 +338,7 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap, unsigned long output_len) { const unsigned long kernel_total_size = VO__end - VO__text; - unsigned long virt_addr = (unsigned long)output; + unsigned long virt_addr = LOAD_PHYSICAL_ADDR; /* Retain x86 boot parameters pointer passed from startup_32/64. */ boot_params = rmode; @@ -399,7 +399,7 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap, #ifndef CONFIG_RELOCATABLE if ((unsigned long)output != LOAD_PHYSICAL_ADDR) error("Destination address does not match LOAD_PHYSICAL_ADDR"); - if ((unsigned long)output != virt_addr) + if (virt_addr != LOAD_PHYSICAL_ADDR) error("Destination virtual address changed when not relocatable"); #endif diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h index 1c8355eadbd1..766a5211f827 100644 --- a/arch/x86/boot/compressed/misc.h +++ b/arch/x86/boot/compressed/misc.h @@ -81,8 +81,6 @@ static inline void choose_random_location(unsigned long input, unsigned long output_size, unsigned long *virt_addr) { - /* No change from existing output location. */ - *virt_addr = *output; } #endif From 79298acc4ba097e9ab78644e3e38902d73547c92 Mon Sep 17 00:00:00 2001 From: Vikas Shivappa Date: Mon, 26 Jun 2017 11:55:49 -0700 Subject: [PATCH 1054/1065] x86/intel_rdt: Fix memory leak on mount failure If mount fails, the kn_info directory is not freed causing memory leak. Add the missing error handling path. Fixes: 4e978d06dedb ("x86/intel_rdt: Add "info" files to resctrl file system") Signed-off-by: Vikas Shivappa Signed-off-by: Thomas Gleixner Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: vikas.shivappa@intel.com Cc: andi.kleen@intel.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1498503368-20173-3-git-send-email-vikas.shivappa@linux.intel.com --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index f5af0cc7eb0d..9257bd9dc664 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -856,11 +856,13 @@ static struct dentry *rdt_mount(struct file_system_type *fs_type, dentry = kernfs_mount(fs_type, flags, rdt_root, RDTGROUP_SUPER_MAGIC, NULL); if (IS_ERR(dentry)) - goto out_cdp; + goto out_destroy; static_branch_enable(&rdt_enable_key); goto out; +out_destroy: + kernfs_remove(kn_info); out_cdp: cdp_disable(); out: From dbd1877754338dc98818d200cd25cf398d8b5d9e Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 28 Jun 2017 21:25:48 -0700 Subject: [PATCH 1055/1065] hashtable: remove repeated phrase from a comment "in a rcu enabled hashtable" is repeated twice in a comment. Signed-off-by: Jakub Kicinski Signed-off-by: Linus Torvalds --- include/linux/hashtable.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/hashtable.h b/include/linux/hashtable.h index 661e5c2a8e2a..082dc1bd0801 100644 --- a/include/linux/hashtable.h +++ b/include/linux/hashtable.h @@ -167,7 +167,6 @@ static inline void hash_del_rcu(struct hlist_node *node) /** * hash_for_each_possible_rcu - iterate over all possible objects hashing to the * same bucket in an rcu enabled hashtable - * in a rcu enabled hashtable * @name: hashtable to iterate * @obj: the type * to use as a loop cursor for each entry * @member: the name of the hlist_node within the struct From fbd576295d6f98b20356d1e6efbc8f976b17c8af Mon Sep 17 00:00:00 2001 From: Zack Weinberg Date: Wed, 14 Jun 2017 08:14:28 -0700 Subject: [PATCH 1056/1065] uapi/linux/a.out.h: don't use deprecated system-specific predefines. uapi/linux/a.out.h uses a number of predefined macros that are deprecated because they're in the application namespace (e.g. '#ifdef linux' instead of '#ifdef __linux__'). This patch either corrects or just removes them if they are not applicable to Linux. The primary reason this is worth bothering to fix, considering how obsolete a.out binary support is, is that the GCC build process considers this such a severe error that it will copy the header into a private directory and change the macro names, which causes future updates to the header to be masked. This header probably doesn't get updated very often anymore, but it is the _only_ uapi header that gets this treatment, so IMHO it is worth patching just to drive that number all the way to zero. Signed-off-by: Zack Weinberg [hch: removed dead conditionals] Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds --- include/uapi/linux/a.out.h | 26 +------------------------- 1 file changed, 1 insertion(+), 25 deletions(-) diff --git a/include/uapi/linux/a.out.h b/include/uapi/linux/a.out.h index 7caf44c7fa51..295cd3ef6330 100644 --- a/include/uapi/linux/a.out.h +++ b/include/uapi/linux/a.out.h @@ -112,24 +112,7 @@ enum machine_type { #define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0) #endif -/* Address of data segment in memory after it is loaded. - Note that it is up to you to define SEGMENT_SIZE - on machines not listed here. */ -#if defined(vax) || defined(hp300) || defined(pyr) -#define SEGMENT_SIZE page_size -#endif -#ifdef sony -#define SEGMENT_SIZE 0x2000 -#endif /* Sony. */ -#ifdef is68k -#define SEGMENT_SIZE 0x20000 -#endif -#if defined(m68k) && defined(PORTAR) -#define PAGE_SIZE 0x400 -#define SEGMENT_SIZE PAGE_SIZE -#endif - -#ifdef linux +/* Address of data segment in memory after it is loaded. */ #ifndef __KERNEL__ #include #endif @@ -142,7 +125,6 @@ enum machine_type { #endif #endif #endif -#endif #define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE) @@ -260,13 +242,7 @@ struct relocation_info unsigned int r_extern:1; /* Four bits that aren't used, but when writing an object file it is desirable to clear them. */ -#ifdef NS32K - unsigned r_bsr:1; - unsigned r_disp:1; - unsigned r_pad:2; -#else unsigned int r_pad:4; -#endif }; #endif /* no N_RELOCATION_INFO_DECLARED. */ From 401e000ab90d7b81d8ea0735e3ff909548754876 Mon Sep 17 00:00:00 2001 From: Sylvain 'ythier' Hitier Date: Sun, 2 Jul 2017 15:21:56 +0200 Subject: [PATCH 1057/1065] moduleparam: fix doc: hwparam_irq configures an IRQ Signed-off-by: Sylvain 'ythier' Hitier Signed-off-by: Linus Torvalds --- include/linux/moduleparam.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 6be1949ebcdf..1ee7b30dafec 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -457,7 +457,7 @@ enum hwparam_type { hwparam_ioport, /* Module parameter configures an I/O port */ hwparam_iomem, /* Module parameter configures an I/O mem address */ hwparam_ioport_or_iomem, /* Module parameter could be either, depending on other option */ - hwparam_irq, /* Module parameter configures an I/O port */ + hwparam_irq, /* Module parameter configures an IRQ */ hwparam_dma, /* Module parameter configures a DMA channel */ hwparam_dma_addr, /* Module parameter configures a DMA buffer address */ hwparam_other, /* Module parameter configures some other value */ From 6f7da290413ba713f0cdd9ff1a2a9bb129ef4f6c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 2 Jul 2017 16:07:02 -0700 Subject: [PATCH 1058/1065] Linux 4.12 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6d8a984ed9c9..283c6236438e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 12 SUBLEVEL = 0 -EXTRAVERSION = -rc7 +EXTRAVERSION = NAME = Fearless Coyote # *DOCUMENTATION* From 1455cf8dbfd06aa7651dcfccbadb7a093944ca65 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Jul 2017 17:24:30 -0700 Subject: [PATCH 1059/1065] driver core: emit uevents when device is bound to a driver There are certain touch controllers that may come up in either normal (application) or boot mode, depending on whether firmware/configuration is corrupted when they are powered on. In boot mode the kernel does not create input device instance (because it does not necessarily know the characteristics of the input device in question). Another number of controllers does not store firmware in a non-volatile memory, and they similarly need to have firmware loaded before input device instance is created. There are also other types of devices with similar behavior. There is a desire to be able to trigger firmware loading via udev, but it has to happen only when driver is bound to a physical device (i2c or spi). These udev actions can not use ADD events, as those happen too early, so we are introducing BIND and UNBIND events that are emitted at the right moment. Also, many drivers create additional driver-specific device attributes when binding to the device, to provide userspace with additional controls. The new events allow userspace to adjust these driver-specific attributes without worrying that they are not there yet. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 4 ++++ include/linux/kobject.h | 2 ++ lib/kobject_uevent.c | 2 ++ 3 files changed, 8 insertions(+) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 4882f06d12df..c17fefc77345 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -259,6 +259,8 @@ static void driver_bound(struct device *dev) if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_BOUND_DRIVER, dev); + + kobject_uevent(&dev->kobj, KOBJ_BIND); } static int driver_sysfs_add(struct device *dev) @@ -848,6 +850,8 @@ static void __device_release_driver(struct device *dev, struct device *parent) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_UNBOUND_DRIVER, dev); + + kobject_uevent(&dev->kobj, KOBJ_UNBIND); } } diff --git a/include/linux/kobject.h b/include/linux/kobject.h index ca85cb80e99a..12f5ddccb97c 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -57,6 +57,8 @@ enum kobject_action { KOBJ_MOVE, KOBJ_ONLINE, KOBJ_OFFLINE, + KOBJ_BIND, + KOBJ_UNBIND, KOBJ_MAX }; diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 9a2b811966eb..4682e8545b5c 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -50,6 +50,8 @@ static const char *kobject_actions[] = { [KOBJ_MOVE] = "move", [KOBJ_ONLINE] = "online", [KOBJ_OFFLINE] = "offline", + [KOBJ_BIND] = "bind", + [KOBJ_UNBIND] = "unbind", }; /** From a7670d425b75f9e44b7d4d0aea04f4a6d5f34291 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Jul 2017 17:24:31 -0700 Subject: [PATCH 1060/1065] driver core: make device_{add|remove}_groups() public Many drivers create additional driver-specific device attributes when binding to the device. To avoid them calling SYSFS API directly, let's export these helpers. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 5 ----- drivers/base/core.c | 2 ++ include/linux/device.h | 5 +++++ 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index e19b1008e5fb..539432a14b5c 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -126,11 +126,6 @@ extern int driver_add_groups(struct device_driver *drv, extern void driver_remove_groups(struct device_driver *drv, const struct attribute_group **groups); -extern int device_add_groups(struct device *dev, - const struct attribute_group **groups); -extern void device_remove_groups(struct device *dev, - const struct attribute_group **groups); - extern char *make_class_name(const char *name, struct kobject *kobj); extern int devres_release_all(struct device *dev); diff --git a/drivers/base/core.c b/drivers/base/core.c index bbecaf9293be..14f8cf5c8b05 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1026,12 +1026,14 @@ int device_add_groups(struct device *dev, const struct attribute_group **groups) { return sysfs_create_groups(&dev->kobj, groups); } +EXPORT_SYMBOL_GPL(device_add_groups); void device_remove_groups(struct device *dev, const struct attribute_group **groups) { sysfs_remove_groups(&dev->kobj, groups); } +EXPORT_SYMBOL_GPL(device_remove_groups); static int device_add_attrs(struct device *dev) { diff --git a/include/linux/device.h b/include/linux/device.h index 9ef518af5515..10cf209a4e82 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -1200,6 +1200,11 @@ struct device *device_create_with_groups(struct class *cls, const char *fmt, ...); extern void device_destroy(struct class *cls, dev_t devt); +extern int __must_check device_add_groups(struct device *dev, + const struct attribute_group **groups); +extern void device_remove_groups(struct device *dev, + const struct attribute_group **groups); + /* * Platform "fixup" functions - allow the platform to have their say * about devices and actions that the general device layer doesn't From e323b2dddc1ce7ea7f032c986c012a04d5977dc8 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Jul 2017 17:24:32 -0700 Subject: [PATCH 1061/1065] driver core: add device_{add|remove}_group() helpers We have helpers that work with NULL terminated array of groups, but many drivers only create a single supplemental group, and do not want to declare a group array. Let's provide them with helpers working with a single group. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/linux/device.h b/include/linux/device.h index 10cf209a4e82..7698a513b35e 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -1205,6 +1205,22 @@ extern int __must_check device_add_groups(struct device *dev, extern void device_remove_groups(struct device *dev, const struct attribute_group **groups); +static inline int __must_check device_add_group(struct device *dev, + const struct attribute_group *grp) +{ + const struct attribute_group *groups[] = { grp, NULL }; + + return device_add_groups(dev, groups); +} + +static inline void device_remove_group(struct device *dev, + const struct attribute_group *grp) +{ + const struct attribute_group *groups[] = { grp, NULL }; + + return device_remove_groups(dev, groups); +} + /* * Platform "fixup" functions - allow the platform to have their say * about devices and actions that the general device layer doesn't From 57b8ff070f9897b22e4f80fda775a489fc797008 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Jul 2017 17:24:33 -0700 Subject: [PATCH 1062/1065] driver core: add devm_device_add_group() and friends Many drivers create additional driver-specific device attributes when binding to the device, and providing managed version of device_create_group() will simplify unbinding and error handling in probe path for such drivers. Without managed version driver writers either have to mix manual and managed resources, which is prone to errors, or open-code this function by providing a wrapper to device_add_group() and use it with devm_add_action() or devm_add_action_or_reset(). Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 130 +++++++++++++++++++++++++++++++++++++++++ include/linux/device.h | 9 +++ 2 files changed, 139 insertions(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index 14f8cf5c8b05..09723532725d 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1035,6 +1035,136 @@ void device_remove_groups(struct device *dev, } EXPORT_SYMBOL_GPL(device_remove_groups); +union device_attr_group_devres { + const struct attribute_group *group; + const struct attribute_group **groups; +}; + +static int devm_attr_group_match(struct device *dev, void *res, void *data) +{ + return ((union device_attr_group_devres *)res)->group == data; +} + +static void devm_attr_group_remove(struct device *dev, void *res) +{ + union device_attr_group_devres *devres = res; + const struct attribute_group *group = devres->group; + + dev_dbg(dev, "%s: removing group %p\n", __func__, group); + sysfs_remove_group(&dev->kobj, group); +} + +static void devm_attr_groups_remove(struct device *dev, void *res) +{ + union device_attr_group_devres *devres = res; + const struct attribute_group **groups = devres->groups; + + dev_dbg(dev, "%s: removing groups %p\n", __func__, groups); + sysfs_remove_groups(&dev->kobj, groups); +} + +/** + * devm_device_add_group - given a device, create a managed attribute group + * @dev: The device to create the group for + * @grp: The attribute group to create + * + * This function creates a group for the first time. It will explicitly + * warn and error if any of the attribute files being created already exist. + * + * Returns 0 on success or error code on failure. + */ +int devm_device_add_group(struct device *dev, const struct attribute_group *grp) +{ + union device_attr_group_devres *devres; + int error; + + devres = devres_alloc(devm_attr_group_remove, + sizeof(*devres), GFP_KERNEL); + if (!devres) + return -ENOMEM; + + error = sysfs_create_group(&dev->kobj, grp); + if (error) { + devres_free(devres); + return error; + } + + devres->group = grp; + devres_add(dev, devres); + return 0; +} +EXPORT_SYMBOL_GPL(devm_device_add_group); + +/** + * devm_device_remove_group: remove a managed group from a device + * @dev: device to remove the group from + * @grp: group to remove + * + * This function removes a group of attributes from a device. The attributes + * previously have to have been created for this group, otherwise it will fail. + */ +void devm_device_remove_group(struct device *dev, + const struct attribute_group *grp) +{ + WARN_ON(devres_release(dev, devm_attr_group_remove, + devm_attr_group_match, + /* cast away const */ (void *)grp)); +} +EXPORT_SYMBOL_GPL(devm_device_remove_group); + +/** + * devm_device_add_groups - create a bunch of managed attribute groups + * @dev: The device to create the group for + * @groups: The attribute groups to create, NULL terminated + * + * This function creates a bunch of managed attribute groups. If an error + * occurs when creating a group, all previously created groups will be + * removed, unwinding everything back to the original state when this + * function was called. It will explicitly warn and error if any of the + * attribute files being created already exist. + * + * Returns 0 on success or error code from sysfs_create_group on failure. + */ +int devm_device_add_groups(struct device *dev, + const struct attribute_group **groups) +{ + union device_attr_group_devres *devres; + int error; + + devres = devres_alloc(devm_attr_groups_remove, + sizeof(*devres), GFP_KERNEL); + if (!devres) + return -ENOMEM; + + error = sysfs_create_groups(&dev->kobj, groups); + if (error) { + devres_free(devres); + return error; + } + + devres->groups = groups; + devres_add(dev, devres); + return 0; +} +EXPORT_SYMBOL_GPL(devm_device_add_groups); + +/** + * devm_device_remove_groups - remove a list of managed groups + * + * @dev: The device for the groups to be removed from + * @groups: NULL terminated list of groups to be removed + * + * If groups is not NULL, remove the specified groups from the device. + */ +void devm_device_remove_groups(struct device *dev, + const struct attribute_group **groups) +{ + WARN_ON(devres_release(dev, devm_attr_groups_remove, + devm_attr_group_match, + /* cast away const */ (void *)groups)); +} +EXPORT_SYMBOL_GPL(devm_device_remove_groups); + static int device_add_attrs(struct device *dev) { struct class *class = dev->class; diff --git a/include/linux/device.h b/include/linux/device.h index 7698a513b35e..f52288c24734 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -1221,6 +1221,15 @@ static inline void device_remove_group(struct device *dev, return device_remove_groups(dev, groups); } +extern int __must_check devm_device_add_groups(struct device *dev, + const struct attribute_group **groups); +extern void devm_device_remove_groups(struct device *dev, + const struct attribute_group **groups); +extern int __must_check devm_device_add_group(struct device *dev, + const struct attribute_group *grp); +extern void devm_device_remove_group(struct device *dev, + const struct attribute_group *grp); + /* * Platform "fixup" functions - allow the platform to have their say * about devices and actions that the general device layer doesn't From 3184125ee2da70c5189cdf03c86cfeac7dd7bba9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Jul 2017 17:24:34 -0700 Subject: [PATCH 1063/1065] Input: gpio_keys - use devm_device_add_group() for attributes Now that we have proper managed API to create device attributes, let's start using it instead of the manual unwinding. Signed-off-by: Dmitry Torokhov Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/input/keyboard/gpio_keys.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index da3d362f21b1..5a08bbc4a8d8 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -814,7 +814,7 @@ static int gpio_keys_probe(struct platform_device *pdev) fwnode_handle_put(child); - error = sysfs_create_group(&dev->kobj, &gpio_keys_attr_group); + error = devm_device_add_group(dev, &gpio_keys_attr_group); if (error) { dev_err(dev, "Unable to export keys/switches, error: %d\n", error); @@ -825,22 +825,11 @@ static int gpio_keys_probe(struct platform_device *pdev) if (error) { dev_err(dev, "Unable to register input device, error: %d\n", error); - goto err_remove_group; + return error; } device_init_wakeup(dev, wakeup); - return 0; - -err_remove_group: - sysfs_remove_group(&dev->kobj, &gpio_keys_attr_group); - return error; -} - -static int gpio_keys_remove(struct platform_device *pdev) -{ - sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group); - return 0; } @@ -897,7 +886,6 @@ static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume); static struct platform_driver gpio_keys_device_driver = { .probe = gpio_keys_probe, - .remove = gpio_keys_remove, .driver = { .name = "gpio-keys", .pm = &gpio_keys_pm_ops, From 36a44af5c176d619552d99697433261141dd1296 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Jul 2017 17:24:35 -0700 Subject: [PATCH 1064/1065] Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01 Now that we have proper managed API to create device attributes, let's start using it instead of the manual unwinding. Signed-off-by: Dmitry Torokhov Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/input/rmi4/rmi_f01.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c index 7f7e9176f7ea..6dca3c0fbb4a 100644 --- a/drivers/input/rmi4/rmi_f01.c +++ b/drivers/input/rmi4/rmi_f01.c @@ -570,18 +570,14 @@ static int rmi_f01_probe(struct rmi_function *fn) dev_set_drvdata(&fn->dev, f01); - error = sysfs_create_group(&fn->rmi_dev->dev.kobj, &rmi_f01_attr_group); + error = devm_device_add_group(&fn->rmi_dev->dev, &rmi_f01_attr_group); if (error) - dev_warn(&fn->dev, "Failed to create sysfs group: %d\n", error); + dev_warn(&fn->dev, + "Failed to create attribute group: %d\n", error); return 0; } -static void rmi_f01_remove(struct rmi_function *fn) -{ - sysfs_remove_group(&fn->rmi_dev->dev.kobj, &rmi_f01_attr_group); -} - static int rmi_f01_config(struct rmi_function *fn) { struct f01_data *f01 = dev_get_drvdata(&fn->dev); @@ -721,7 +717,6 @@ struct rmi_function_handler rmi_f01_handler = { }, .func = 0x01, .probe = rmi_f01_probe, - .remove = rmi_f01_remove, .config = rmi_f01_config, .attention = rmi_f01_attention, .suspend = rmi_f01_suspend, From 072a7852338af900c302490474939e089f4bd4c4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Jul 2017 17:24:36 -0700 Subject: [PATCH 1065/1065] Input: axp20x-pek - switch to using devm_device_add_group() Now that we have proper managed API to create device attributes, let's use it instead of installing a custom devm action. Signed-off-by: Dmitry Torokhov Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/input/misc/axp20x-pek.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c index 400869e61a06..0932d3e56199 100644 --- a/drivers/input/misc/axp20x-pek.c +++ b/drivers/input/misc/axp20x-pek.c @@ -182,13 +182,6 @@ static irqreturn_t axp20x_pek_irq(int irq, void *pwr) return IRQ_HANDLED; } -static void axp20x_remove_sysfs_group(void *_data) -{ - struct device *dev = _data; - - sysfs_remove_group(&dev->kobj, &axp20x_attribute_group); -} - static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek, struct platform_device *pdev) { @@ -310,22 +303,13 @@ static int axp20x_pek_probe(struct platform_device *pdev) return error; } - error = sysfs_create_group(&pdev->dev.kobj, &axp20x_attribute_group); + error = devm_device_add_group(&pdev->dev, &axp20x_attribute_group); if (error) { dev_err(&pdev->dev, "Failed to create sysfs attributes: %d\n", error); return error; } - error = devm_add_action(&pdev->dev, - axp20x_remove_sysfs_group, &pdev->dev); - if (error) { - axp20x_remove_sysfs_group(&pdev->dev); - dev_err(&pdev->dev, "Failed to add sysfs cleanup action: %d\n", - error); - return error; - } - platform_set_drvdata(pdev, axp20x_pek); return 0;