usb: phy: Add driver for the Ingenic JZ4770 USB transceiver
Add a driver to support the USB PHY found in the JZ4770 SoC from Ingenic. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200229161820.17824-2-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Родитель
adc221b564
Коммит
541368b46b
|
@ -184,4 +184,12 @@ config USB_ULPI_VIEWPORT
|
|||
Provides read/write operations to the ULPI phy register set for
|
||||
controllers with a viewport register (e.g. Chipidea/ARC controllers).
|
||||
|
||||
config JZ4770_PHY
|
||||
tristate "Ingenic JZ4770 Transceiver Driver"
|
||||
depends on MIPS || COMPILE_TEST
|
||||
select USB_PHY
|
||||
help
|
||||
This driver provides PHY support for the USB controller found
|
||||
on the JZ4770 SoC from Ingenic.
|
||||
|
||||
endmenu
|
||||
|
|
|
@ -24,3 +24,4 @@ obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
|
|||
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
|
||||
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
|
||||
obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
|
||||
obj-$(CONFIG_JZ4770_PHY) += phy-jz4770.o
|
||||
|
|
|
@ -0,0 +1,243 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Ingenic JZ4770 USB PHY driver
|
||||
* Copyright (c) Paul Cercueil <paul@crapouillou.net>
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/phy.h>
|
||||
|
||||
#define REG_USBPCR_OFFSET 0x00
|
||||
#define REG_USBRDT_OFFSET 0x04
|
||||
#define REG_USBVBFIL_OFFSET 0x08
|
||||
#define REG_USBPCR1_OFFSET 0x0c
|
||||
|
||||
/* USBPCR */
|
||||
#define USBPCR_USB_MODE BIT(31)
|
||||
#define USBPCR_AVLD_REG BIT(30)
|
||||
#define USBPCR_INCRM BIT(27)
|
||||
#define USBPCR_CLK12_EN BIT(26)
|
||||
#define USBPCR_COMMONONN BIT(25)
|
||||
#define USBPCR_VBUSVLDEXT BIT(24)
|
||||
#define USBPCR_VBUSVLDEXTSEL BIT(23)
|
||||
#define USBPCR_POR BIT(22)
|
||||
#define USBPCR_SIDDQ BIT(21)
|
||||
#define USBPCR_OTG_DISABLE BIT(20)
|
||||
#define USBPCR_TXPREEMPHTUNE BIT(6)
|
||||
|
||||
#define USBPCR_IDPULLUP_LSB 28
|
||||
#define USBPCR_IDPULLUP_MASK GENMASK(29, USBPCR_IDPULLUP_LSB)
|
||||
#define USBPCR_IDPULLUP_ALWAYS (3 << USBPCR_IDPULLUP_LSB)
|
||||
#define USBPCR_IDPULLUP_SUSPEND (1 << USBPCR_IDPULLUP_LSB)
|
||||
#define USBPCR_IDPULLUP_OTG (0 << USBPCR_IDPULLUP_LSB)
|
||||
|
||||
#define USBPCR_COMPDISTUNE_LSB 17
|
||||
#define USBPCR_COMPDISTUNE_MASK GENMASK(19, USBPCR_COMPDISTUNE_LSB)
|
||||
#define USBPCR_COMPDISTUNE_DFT 4
|
||||
|
||||
#define USBPCR_OTGTUNE_LSB 14
|
||||
#define USBPCR_OTGTUNE_MASK GENMASK(16, USBPCR_OTGTUNE_LSB)
|
||||
#define USBPCR_OTGTUNE_DFT 4
|
||||
|
||||
#define USBPCR_SQRXTUNE_LSB 11
|
||||
#define USBPCR_SQRXTUNE_MASK GENMASK(13, USBPCR_SQRXTUNE_LSB)
|
||||
#define USBPCR_SQRXTUNE_DFT 3
|
||||
|
||||
#define USBPCR_TXFSLSTUNE_LSB 7
|
||||
#define USBPCR_TXFSLSTUNE_MASK GENMASK(10, USBPCR_TXFSLSTUNE_LSB)
|
||||
#define USBPCR_TXFSLSTUNE_DFT 3
|
||||
|
||||
#define USBPCR_TXRISETUNE_LSB 4
|
||||
#define USBPCR_TXRISETUNE_MASK GENMASK(5, USBPCR_TXRISETUNE_LSB)
|
||||
#define USBPCR_TXRISETUNE_DFT 3
|
||||
|
||||
#define USBPCR_TXVREFTUNE_LSB 0
|
||||
#define USBPCR_TXVREFTUNE_MASK GENMASK(3, USBPCR_TXVREFTUNE_LSB)
|
||||
#define USBPCR_TXVREFTUNE_DFT 5
|
||||
|
||||
/* USBRDT */
|
||||
#define USBRDT_VBFIL_LD_EN BIT(25)
|
||||
#define USBRDT_IDDIG_EN BIT(24)
|
||||
#define USBRDT_IDDIG_REG BIT(23)
|
||||
|
||||
#define USBRDT_USBRDT_LSB 0
|
||||
#define USBRDT_USBRDT_MASK GENMASK(22, USBRDT_USBRDT_LSB)
|
||||
|
||||
/* USBPCR1 */
|
||||
#define USBPCR1_UHC_POWON BIT(5)
|
||||
|
||||
struct jz4770_phy {
|
||||
struct usb_phy phy;
|
||||
struct usb_otg otg;
|
||||
struct device *dev;
|
||||
void __iomem *base;
|
||||
struct clk *clk;
|
||||
struct regulator *vcc_supply;
|
||||
};
|
||||
|
||||
static inline struct jz4770_phy *otg_to_jz4770_phy(struct usb_otg *otg)
|
||||
{
|
||||
return container_of(otg, struct jz4770_phy, otg);
|
||||
}
|
||||
|
||||
static inline struct jz4770_phy *phy_to_jz4770_phy(struct usb_phy *phy)
|
||||
{
|
||||
return container_of(phy, struct jz4770_phy, phy);
|
||||
}
|
||||
|
||||
static int jz4770_phy_set_peripheral(struct usb_otg *otg,
|
||||
struct usb_gadget *gadget)
|
||||
{
|
||||
struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
|
||||
u32 reg;
|
||||
|
||||
reg = readl(priv->base + REG_USBPCR_OFFSET);
|
||||
reg &= ~USBPCR_USB_MODE;
|
||||
reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
|
||||
writel(reg, priv->base + REG_USBPCR_OFFSET);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int jz4770_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
|
||||
{
|
||||
struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
|
||||
u32 reg;
|
||||
|
||||
reg = readl(priv->base + REG_USBPCR_OFFSET);
|
||||
reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
|
||||
reg |= USBPCR_USB_MODE;
|
||||
writel(reg, priv->base + REG_USBPCR_OFFSET);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int jz4770_phy_init(struct usb_phy *phy)
|
||||
{
|
||||
struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
|
||||
int err;
|
||||
u32 reg;
|
||||
|
||||
err = regulator_enable(priv->vcc_supply);
|
||||
if (err) {
|
||||
dev_err(priv->dev, "Unable to enable VCC: %d", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
err = clk_prepare_enable(priv->clk);
|
||||
if (err) {
|
||||
dev_err(priv->dev, "Unable to start clock: %d", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_IDPULLUP_ALWAYS |
|
||||
(USBPCR_COMPDISTUNE_DFT << USBPCR_COMPDISTUNE_LSB) |
|
||||
(USBPCR_OTGTUNE_DFT << USBPCR_OTGTUNE_LSB) |
|
||||
(USBPCR_SQRXTUNE_DFT << USBPCR_SQRXTUNE_LSB) |
|
||||
(USBPCR_TXFSLSTUNE_DFT << USBPCR_TXFSLSTUNE_LSB) |
|
||||
(USBPCR_TXRISETUNE_DFT << USBPCR_TXRISETUNE_LSB) |
|
||||
(USBPCR_TXVREFTUNE_DFT << USBPCR_TXVREFTUNE_LSB) |
|
||||
USBPCR_POR;
|
||||
writel(reg, priv->base + REG_USBPCR_OFFSET);
|
||||
|
||||
/* Wait for PHY to reset */
|
||||
usleep_range(30, 300);
|
||||
writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
|
||||
usleep_range(300, 1000);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void jz4770_phy_shutdown(struct usb_phy *phy)
|
||||
{
|
||||
struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
|
||||
|
||||
clk_disable_unprepare(priv->clk);
|
||||
regulator_disable(priv->vcc_supply);
|
||||
}
|
||||
|
||||
static void jz4770_phy_remove(void *phy)
|
||||
{
|
||||
usb_remove_phy(phy);
|
||||
}
|
||||
|
||||
static int jz4770_phy_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct jz4770_phy *priv;
|
||||
int err;
|
||||
|
||||
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
platform_set_drvdata(pdev, priv);
|
||||
priv->dev = dev;
|
||||
priv->phy.dev = dev;
|
||||
priv->phy.otg = &priv->otg;
|
||||
priv->phy.label = "jz4770-phy";
|
||||
priv->phy.init = jz4770_phy_init;
|
||||
priv->phy.shutdown = jz4770_phy_shutdown;
|
||||
|
||||
priv->otg.state = OTG_STATE_UNDEFINED;
|
||||
priv->otg.usb_phy = &priv->phy;
|
||||
priv->otg.set_host = jz4770_phy_set_host;
|
||||
priv->otg.set_peripheral = jz4770_phy_set_peripheral;
|
||||
|
||||
priv->base = devm_platform_ioremap_resource(pdev, 0);
|
||||
if (IS_ERR(priv->base)) {
|
||||
dev_err(dev, "Failed to map registers");
|
||||
return PTR_ERR(priv->base);
|
||||
}
|
||||
|
||||
priv->clk = devm_clk_get(dev, NULL);
|
||||
if (IS_ERR(priv->clk)) {
|
||||
err = PTR_ERR(priv->clk);
|
||||
if (err != -EPROBE_DEFER)
|
||||
dev_err(dev, "Failed to get clock");
|
||||
return err;
|
||||
}
|
||||
|
||||
priv->vcc_supply = devm_regulator_get(dev, "vcc");
|
||||
if (IS_ERR(priv->vcc_supply)) {
|
||||
err = PTR_ERR(priv->vcc_supply);
|
||||
if (err != -EPROBE_DEFER)
|
||||
dev_err(dev, "failed to get regulator");
|
||||
return err;
|
||||
}
|
||||
|
||||
err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
|
||||
if (err) {
|
||||
if (err != -EPROBE_DEFER)
|
||||
dev_err(dev, "Unable to register PHY");
|
||||
return err;
|
||||
}
|
||||
|
||||
return devm_add_action_or_reset(dev, jz4770_phy_remove, &priv->phy);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id jz4770_phy_of_matches[] = {
|
||||
{ .compatible = "ingenic,jz4770-phy" },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, jz4770_phy_of_matches);
|
||||
#endif
|
||||
|
||||
static struct platform_driver jz4770_phy_driver = {
|
||||
.probe = jz4770_phy_probe,
|
||||
.driver = {
|
||||
.name = "jz4770-phy",
|
||||
.of_match_table = of_match_ptr(jz4770_phy_of_matches),
|
||||
},
|
||||
};
|
||||
module_platform_driver(jz4770_phy_driver);
|
||||
|
||||
MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
|
||||
MODULE_DESCRIPTION("Ingenic JZ4770 USB PHY driver");
|
||||
MODULE_LICENSE("GPL");
|
Загрузка…
Ссылка в новой задаче