Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-next
This commit is contained in:
Коммит
5445d62652
|
@ -0,0 +1,72 @@
|
|||
RT5650/RT5645 audio CODEC
|
||||
|
||||
This device supports I2C only.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : One of "realtek,rt5645" or "realtek,rt5650".
|
||||
|
||||
- reg : The I2C address of the device.
|
||||
|
||||
- interrupts : The CODEC's interrupt output.
|
||||
|
||||
Optional properties:
|
||||
|
||||
- hp-detect-gpios:
|
||||
a GPIO spec for the external headphone detect pin. If jd-mode = 0,
|
||||
we will get the JD status by getting the value of hp-detect-gpios.
|
||||
|
||||
- realtek,in2-differential
|
||||
Boolean. Indicate MIC2 input are differential, rather than single-ended.
|
||||
|
||||
- realtek,dmic1-data-pin
|
||||
0: dmic1 is not used
|
||||
1: using IN2P pin as dmic1 data pin
|
||||
2: using GPIO6 pin as dmic1 data pin
|
||||
3: using GPIO10 pin as dmic1 data pin
|
||||
4: using GPIO12 pin as dmic1 data pin
|
||||
|
||||
- realtek,dmic2-data-pin
|
||||
0: dmic2 is not used
|
||||
1: using IN2N pin as dmic2 data pin
|
||||
2: using GPIO5 pin as dmic2 data pin
|
||||
3: using GPIO11 pin as dmic2 data pin
|
||||
|
||||
-- realtek,jd-mode : The JD mode of rt5645/rt5650
|
||||
0 : rt5645/rt5650 JD function is not used
|
||||
1 : Mode-0 (VDD=3.3V), two port jack detection
|
||||
2 : Mode-1 (VDD=3.3V), one port jack detection
|
||||
3 : Mode-2 (VDD=1.8V), one port jack detection
|
||||
|
||||
Pins on the device (for linking into audio routes) for RT5645/RT5650:
|
||||
|
||||
* DMIC L1
|
||||
* DMIC R1
|
||||
* DMIC L2
|
||||
* DMIC R2
|
||||
* IN1P
|
||||
* IN1N
|
||||
* IN2P
|
||||
* IN2N
|
||||
* Haptic Generator
|
||||
* HPOL
|
||||
* HPOR
|
||||
* LOUTL
|
||||
* LOUTR
|
||||
* PDM1L
|
||||
* PDM1R
|
||||
* SPOL
|
||||
* SPOR
|
||||
|
||||
Example:
|
||||
|
||||
codec: rt5650@1a {
|
||||
compatible = "realtek,rt5650";
|
||||
reg = <0x1a>;
|
||||
hp-detect-gpios = <&gpio 19 0>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
|
||||
realtek,dmic-en = "true";
|
||||
realtek,en-jd-func = "true";
|
||||
realtek,jd-mode = <3>;
|
||||
};
|
|
@ -20,9 +20,6 @@ struct rt5645_platform_data {
|
|||
unsigned int dmic2_data_pin;
|
||||
/* 0 = IN2P; 1 = GPIO6; 2 = GPIO10; 3 = GPIO12 */
|
||||
|
||||
unsigned int hp_det_gpio;
|
||||
bool gpio_hp_det_active_high;
|
||||
|
||||
unsigned int jd_mode;
|
||||
};
|
||||
|
||||
|
|
|
@ -349,6 +349,7 @@ static bool rt5645_readable_register(struct device *dev, unsigned int reg)
|
|||
case RT5645_TDM_CTRL_1:
|
||||
case RT5645_TDM_CTRL_2:
|
||||
case RT5645_TDM_CTRL_3:
|
||||
case RT5650_TDM_CTRL_4:
|
||||
case RT5645_GLB_CLK:
|
||||
case RT5645_PLL_CTRL1:
|
||||
case RT5645_PLL_CTRL2:
|
||||
|
@ -1705,15 +1706,6 @@ static const struct snd_soc_dapm_widget rt5645_dapm_widgets[] = {
|
|||
SND_SOC_DAPM_MUX("RT5645 IF1 ADC Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5645_if1_adc_in_mux),
|
||||
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 ADC1 Swap Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5650_if1_adc1_in_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 ADC2 Swap Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5650_if1_adc2_in_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 ADC3 Swap Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5650_if1_adc3_in_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 ADC Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5650_if1_adc_in_mux),
|
||||
|
||||
SND_SOC_DAPM_MUX("IF2 ADC Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5645_if2_adc_in_mux),
|
||||
|
||||
|
@ -1732,14 +1724,6 @@ static const struct snd_soc_dapm_widget rt5645_dapm_widgets[] = {
|
|||
&rt5645_if1_dac2_tdm_sel_mux),
|
||||
SND_SOC_DAPM_MUX("RT5645 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0,
|
||||
&rt5645_if1_dac3_tdm_sel_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 L Mux", SND_SOC_NOPM, 0, 0,
|
||||
&rt5650_if1_dac0_tdm_sel_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 R Mux", SND_SOC_NOPM, 0, 0,
|
||||
&rt5650_if1_dac1_tdm_sel_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 L Mux", SND_SOC_NOPM, 0, 0,
|
||||
&rt5650_if1_dac2_tdm_sel_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0,
|
||||
&rt5650_if1_dac3_tdm_sel_mux),
|
||||
SND_SOC_DAPM_PGA("IF1 ADC", SND_SOC_NOPM, 0, 0, NULL, 0),
|
||||
SND_SOC_DAPM_PGA("IF1 ADC L", SND_SOC_NOPM, 0, 0, NULL, 0),
|
||||
SND_SOC_DAPM_PGA("IF1 ADC R", SND_SOC_NOPM, 0, 0, NULL, 0),
|
||||
|
@ -1881,6 +1865,24 @@ static const struct snd_soc_dapm_widget rt5650_specific_dapm_widgets[] = {
|
|||
0, 0, &rt5650_a_dac2_l_mux),
|
||||
SND_SOC_DAPM_MUX("A DAC2 R Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5650_a_dac2_r_mux),
|
||||
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 ADC1 Swap Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5650_if1_adc1_in_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 ADC2 Swap Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5650_if1_adc2_in_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 ADC3 Swap Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5650_if1_adc3_in_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 ADC Mux", SND_SOC_NOPM,
|
||||
0, 0, &rt5650_if1_adc_in_mux),
|
||||
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 L Mux", SND_SOC_NOPM, 0, 0,
|
||||
&rt5650_if1_dac0_tdm_sel_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 R Mux", SND_SOC_NOPM, 0, 0,
|
||||
&rt5650_if1_dac1_tdm_sel_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 L Mux", SND_SOC_NOPM, 0, 0,
|
||||
&rt5650_if1_dac2_tdm_sel_mux),
|
||||
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0,
|
||||
&rt5650_if1_dac3_tdm_sel_mux),
|
||||
};
|
||||
|
||||
static const struct snd_soc_dapm_route rt5645_dapm_routes[] = {
|
||||
|
@ -2761,6 +2763,7 @@ static void rt5645_enable_push_button_irq(struct snd_soc_codec *codec,
|
|||
struct rt5645_priv *rt5645 = snd_soc_codec_get_drvdata(codec);
|
||||
|
||||
if (enable) {
|
||||
snd_soc_dapm_mutex_lock(&codec->dapm);
|
||||
snd_soc_dapm_force_enable_pin_unlocked(&codec->dapm,
|
||||
"ADC L power");
|
||||
snd_soc_dapm_force_enable_pin_unlocked(&codec->dapm,
|
||||
|
@ -2770,6 +2773,8 @@ static void rt5645_enable_push_button_irq(struct snd_soc_codec *codec,
|
|||
snd_soc_dapm_force_enable_pin_unlocked(&codec->dapm,
|
||||
"Mic Det Power");
|
||||
snd_soc_dapm_sync_unlocked(&codec->dapm);
|
||||
snd_soc_dapm_mutex_unlock(&codec->dapm);
|
||||
|
||||
snd_soc_update_bits(codec,
|
||||
RT5645_INT_IRQ_ST, 0x8, 0x8);
|
||||
snd_soc_update_bits(codec,
|
||||
|
@ -2780,6 +2785,8 @@ static void rt5645_enable_push_button_irq(struct snd_soc_codec *codec,
|
|||
} else {
|
||||
snd_soc_update_bits(codec, RT5650_4BTN_IL_CMD2, 0x8000, 0x0);
|
||||
snd_soc_update_bits(codec, RT5645_INT_IRQ_ST, 0x8, 0x0);
|
||||
|
||||
snd_soc_dapm_mutex_lock(&codec->dapm);
|
||||
snd_soc_dapm_disable_pin_unlocked(&codec->dapm,
|
||||
"ADC L power");
|
||||
snd_soc_dapm_disable_pin_unlocked(&codec->dapm,
|
||||
|
@ -2790,6 +2797,7 @@ static void rt5645_enable_push_button_irq(struct snd_soc_codec *codec,
|
|||
snd_soc_dapm_disable_pin_unlocked(&codec->dapm,
|
||||
"Mic Det Power");
|
||||
snd_soc_dapm_sync_unlocked(&codec->dapm);
|
||||
snd_soc_dapm_mutex_unlock(&codec->dapm);
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -2937,17 +2945,11 @@ static int rt5645_irq_detection(struct rt5645_priv *rt5645)
|
|||
|
||||
switch (rt5645->pdata.jd_mode) {
|
||||
case 0: /* Not using rt5645 JD */
|
||||
if (gpio_is_valid(rt5645->pdata.hp_det_gpio)) {
|
||||
gpio_state = gpio_get_value(rt5645->pdata.hp_det_gpio);
|
||||
dev_dbg(rt5645->codec->dev, "gpio = %d(%d)\n",
|
||||
rt5645->pdata.hp_det_gpio, gpio_state);
|
||||
}
|
||||
if ((rt5645->pdata.gpio_hp_det_active_high && gpio_state) ||
|
||||
(!rt5645->pdata.gpio_hp_det_active_high &&
|
||||
!gpio_state)) {
|
||||
report = rt5645_jack_detect(rt5645->codec, 1);
|
||||
} else {
|
||||
report = rt5645_jack_detect(rt5645->codec, 0);
|
||||
if (rt5645->gpiod_hp_det) {
|
||||
gpio_state = gpiod_get_value(rt5645->gpiod_hp_det);
|
||||
dev_dbg(rt5645->codec->dev, "gpio_state = %d\n",
|
||||
gpio_state);
|
||||
report = rt5645_jack_detect(rt5645->codec, gpio_state);
|
||||
}
|
||||
snd_soc_jack_report(rt5645->hp_jack,
|
||||
report, SND_JACK_HEADPHONE);
|
||||
|
@ -3230,6 +3232,20 @@ static struct dmi_system_id dmi_platform_intel_braswell[] = {
|
|||
{ }
|
||||
};
|
||||
|
||||
static int rt5645_parse_dt(struct rt5645_priv *rt5645, struct device *dev)
|
||||
{
|
||||
rt5645->pdata.in2_diff = device_property_read_bool(dev,
|
||||
"realtek,in2-differential");
|
||||
device_property_read_u32(dev,
|
||||
"realtek,dmic1-data-pin", &rt5645->pdata.dmic1_data_pin);
|
||||
device_property_read_u32(dev,
|
||||
"realtek,dmic2-data-pin", &rt5645->pdata.dmic2_data_pin);
|
||||
device_property_read_u32(dev,
|
||||
"realtek,jd-mode", &rt5645->pdata.jd_mode);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rt5645_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
|
@ -3237,7 +3253,6 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
|
|||
struct rt5645_priv *rt5645;
|
||||
int ret;
|
||||
unsigned int val;
|
||||
struct gpio_desc *gpiod;
|
||||
|
||||
rt5645 = devm_kzalloc(&i2c->dev, sizeof(struct rt5645_priv),
|
||||
GFP_KERNEL);
|
||||
|
@ -3247,22 +3262,19 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
|
|||
rt5645->i2c = i2c;
|
||||
i2c_set_clientdata(i2c, rt5645);
|
||||
|
||||
if (pdata) {
|
||||
if (pdata)
|
||||
rt5645->pdata = *pdata;
|
||||
} else {
|
||||
if (dmi_check_system(dmi_platform_intel_braswell)) {
|
||||
rt5645->pdata = *rt5645_pdata;
|
||||
gpiod = devm_gpiod_get_index(&i2c->dev, "rt5645", 0);
|
||||
else if (dmi_check_system(dmi_platform_intel_braswell))
|
||||
rt5645->pdata = *rt5645_pdata;
|
||||
else
|
||||
rt5645_parse_dt(rt5645, &i2c->dev);
|
||||
|
||||
if (IS_ERR(gpiod) || gpiod_direction_input(gpiod)) {
|
||||
rt5645->pdata.hp_det_gpio = -1;
|
||||
dev_err(&i2c->dev, "failed to initialize gpiod\n");
|
||||
} else {
|
||||
rt5645->pdata.hp_det_gpio = desc_to_gpio(gpiod);
|
||||
rt5645->pdata.gpio_hp_det_active_high
|
||||
= !gpiod_is_active_low(gpiod);
|
||||
}
|
||||
}
|
||||
rt5645->gpiod_hp_det = devm_gpiod_get_optional(&i2c->dev, "hp-detect",
|
||||
GPIOD_IN);
|
||||
|
||||
if (IS_ERR(rt5645->gpiod_hp_det)) {
|
||||
dev_err(&i2c->dev, "failed to initialize gpiod\n");
|
||||
return PTR_ERR(rt5645->gpiod_hp_det);
|
||||
}
|
||||
|
||||
rt5645->regmap = devm_regmap_init_i2c(i2c, &rt5645_regmap);
|
||||
|
@ -3426,16 +3438,6 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
|
|||
dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
|
||||
}
|
||||
|
||||
if (gpio_is_valid(rt5645->pdata.hp_det_gpio)) {
|
||||
ret = gpio_request(rt5645->pdata.hp_det_gpio, "rt5645");
|
||||
if (ret)
|
||||
dev_err(&i2c->dev, "Fail gpio_request hp_det_gpio\n");
|
||||
|
||||
ret = gpio_direction_input(rt5645->pdata.hp_det_gpio);
|
||||
if (ret)
|
||||
dev_err(&i2c->dev, "Fail gpio_direction hp_det_gpio\n");
|
||||
}
|
||||
|
||||
return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_rt5645,
|
||||
rt5645_dai, ARRAY_SIZE(rt5645_dai));
|
||||
}
|
||||
|
@ -3449,9 +3451,6 @@ static int rt5645_i2c_remove(struct i2c_client *i2c)
|
|||
|
||||
cancel_delayed_work_sync(&rt5645->jack_detect_work);
|
||||
|
||||
if (gpio_is_valid(rt5645->pdata.hp_det_gpio))
|
||||
gpio_free(rt5645->pdata.hp_det_gpio);
|
||||
|
||||
snd_soc_unregister_codec(&i2c->dev);
|
||||
|
||||
return 0;
|
||||
|
|
|
@ -2182,6 +2182,7 @@ struct rt5645_priv {
|
|||
struct rt5645_platform_data pdata;
|
||||
struct regmap *regmap;
|
||||
struct i2c_client *i2c;
|
||||
struct gpio_desc *gpiod_hp_det;
|
||||
struct snd_soc_jack *hp_jack;
|
||||
struct snd_soc_jack *mic_jack;
|
||||
struct snd_soc_jack *btn_jack;
|
||||
|
|
Загрузка…
Ссылка в новой задаче