[media] adv7604: improve HDMI audio handling

- Mute audio before switching inputs to avoid noise/pops
- Mute audio if audio FIFO over-/underflows (AD Recommended setting)
- Reset FIFO if it over-/underflows (AD Recommended setting)

Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This commit is contained in:
Mats Randgaard 2013-12-05 10:33:41 -03:00 коммит произвёл Mauro Carvalho Chehab
Родитель 14d0323351
Коммит 5474b983c6
1 изменённых файлов: 8 добавлений и 5 удалений

Просмотреть файл

@ -1387,14 +1387,12 @@ static void enable_input(struct v4l2_subdev *sd)
struct adv7604_state *state = to_state(sd);
if (is_analog_input(sd)) {
/* enable */
io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */
} else if (is_digital_input(sd)) {
/* enable */
hdmi_write_and_or(sd, 0x00, 0xfc, state->selected_input);
hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */
hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */
io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */
hdmi_write_and_or(sd, 0x1a, 0xef, 0x00); /* Unmute audio */
} else {
v4l2_dbg(2, debug, sd, "%s: Unknown port %d selected\n",
__func__, state->selected_input);
@ -1403,9 +1401,9 @@ static void enable_input(struct v4l2_subdev *sd)
static void disable_input(struct v4l2_subdev *sd)
{
/* disable */
hdmi_write_and_or(sd, 0x1a, 0xef, 0x10); /* Mute audio */
msleep(16); /* 512 samples with >= 32 kHz sample rate [REF_03, c. 7.16.10] */
io_write(sd, 0x15, 0xbe); /* Tristate all outputs from video core */
hdmi_write(sd, 0x1a, 0x1a); /* Mute audio */
hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */
}
@ -2044,6 +2042,11 @@ static int adv7604_core_init(struct v4l2_subdev *sd)
cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution
for digital formats */
/* HDMI audio */
hdmi_write_and_or(sd, 0x15, 0xfc, 0x03); /* Mute on FIFO over-/underflow [REF_01, c. 1.2.18] */
hdmi_write_and_or(sd, 0x1a, 0xf1, 0x08); /* Wait 1 s before unmute */
hdmi_write_and_or(sd, 0x68, 0xf9, 0x06); /* FIFO reset on over-/underflow [REF_01, c. 1.2.19] */
/* TODO from platform data */
afe_write(sd, 0xb5, 0x01); /* Setting MCLK to 256Fs */