From 54793d0ef113145c8c0342d9bf2ade5c6b71cba5 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Mon, 27 Feb 2012 20:04:09 +0000 Subject: [PATCH] powerpc/eeh: Replace pci_dn with eeh_dev for EEH on pSeries The pci_dn has been replaced with eeh_dev. In order to comply with the rule, the EEH platform implementation on pSeries should also be adjusted for a little bit so that it will depend on eeh_dev instead of pci_dn. The patch replaces pci_dn with eeh_dev. The corresponding information will be retrieved from eeh_dev instead of pci_dn. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/eeh_pseries.c | 96 ++++++++++---------- 1 file changed, 48 insertions(+), 48 deletions(-) diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 4ed06b24ba49..36a1af1d1140 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -144,11 +144,11 @@ static int pseries_eeh_init(void) static int pseries_eeh_set_option(struct device_node *dn, int option) { int ret = 0; - struct pci_dn *pdn; + struct eeh_dev *edev; const u32 *reg; int config_addr; - pdn = PCI_DN(dn); + edev = of_node_to_eeh_dev(dn); /* * When we're enabling or disabling EEH functioality on @@ -165,9 +165,9 @@ static int pseries_eeh_set_option(struct device_node *dn, int option) case EEH_OPT_THAW_MMIO: case EEH_OPT_THAW_DMA: - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; break; default: @@ -177,8 +177,8 @@ static int pseries_eeh_set_option(struct device_node *dn, int option) } ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, - config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), option); + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), option); return ret; } @@ -198,11 +198,11 @@ static int pseries_eeh_set_option(struct device_node *dn, int option) */ static int pseries_eeh_get_pe_addr(struct device_node *dn) { - struct pci_dn *pdn; + struct eeh_dev *edev; int ret = 0; int rets[3]; - pdn = PCI_DN(dn); + edev = of_node_to_eeh_dev(dn); if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) { /* @@ -211,15 +211,15 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn) * meaningless. */ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, - pdn->eeh_config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), 1); + edev->config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), 1); if (ret || (rets[0] == 0)) return 0; /* Retrieve the associated PE config address */ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, - pdn->eeh_config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), 0); + edev->config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), 0); if (ret) { pr_warning("%s: Failed to get PE address for %s\n", __func__, dn->full_name); @@ -231,8 +231,8 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn) if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets, - pdn->eeh_config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), 0); + edev->config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), 0); if (ret) { pr_warning("%s: Failed to get PE address for %s\n", __func__, dn->full_name); @@ -260,28 +260,28 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn) */ static int pseries_eeh_get_state(struct device_node *dn, int *state) { - struct pci_dn *pdn; + struct eeh_dev *edev; int config_addr; int ret; int rets[4]; int result; /* Figure out PE config address if possible */ - pdn = PCI_DN(dn); - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; + edev = of_node_to_eeh_dev(dn); + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets, - config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid)); + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid)); } else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) { /* Fake PE unavailable info */ rets[2] = 0; ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets, - config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid)); + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid)); } else { return EEH_STATE_NOT_SUPPORT; } @@ -340,27 +340,27 @@ static int pseries_eeh_get_state(struct device_node *dn, int *state) */ static int pseries_eeh_reset(struct device_node *dn, int option) { - struct pci_dn *pdn; + struct eeh_dev *edev; int config_addr; int ret; /* Figure out PE address */ - pdn = PCI_DN(dn); - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; + edev = of_node_to_eeh_dev(dn); + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; /* Reset PE through RTAS call */ ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL, - config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), option); + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), option); /* If fundamental-reset not supported, try hot-reset */ if (option == EEH_RESET_FUNDAMENTAL && ret == -8) { ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL, - config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), EEH_RESET_HOT); + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), EEH_RESET_HOT); } return ret; @@ -437,22 +437,22 @@ static int pseries_eeh_wait_state(struct device_node *dn, int max_wait) */ static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_log, unsigned long len) { - struct pci_dn *pdn; + struct eeh_dev *edev; int config_addr; unsigned long flags; int ret; - pdn = PCI_DN(dn); + edev = of_node_to_eeh_dev(dn); spin_lock_irqsave(&slot_errbuf_lock, flags); memset(slot_errbuf, 0, eeh_error_buf_size); /* Figure out the PE address */ - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr, - BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid), + BUID_HI(edev->phb->buid), BUID_LO(edev->phb->buid), virt_to_phys(drv_log), len, virt_to_phys(slot_errbuf), eeh_error_buf_size, severity); @@ -473,25 +473,25 @@ static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_l */ static int pseries_eeh_configure_bridge(struct device_node *dn) { - struct pci_dn *pdn; + struct eeh_dev *edev; int config_addr; int ret; /* Figure out the PE address */ - pdn = PCI_DN(dn); - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; + edev = of_node_to_eeh_dev(dn); + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; /* Use new configure-pe function, if supported */ if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { ret = rtas_call(ibm_configure_pe, 3, 1, NULL, - config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid)); + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid)); } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, - config_addr, BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid)); + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid)); } else { return -EFAULT; }