diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index aae665a3a254..f7aa2dc1ff85 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -380,17 +380,6 @@ config BT_ATH3K Say Y here to compile support for "Atheros firmware download driver" into the kernel or say M to compile it as module (ath3k). -config BT_WILINK - tristate "Texas Instruments WiLink7 driver" - depends on TI_ST - help - This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS - combo devices. This makes use of shared transport line discipline - core driver to communicate with the BT core of the combo chip. - - Say Y here to compile support for Texas Instrument's WiLink7 driver - into the kernel or say M to compile it as module (btwilink). - config BT_MTKSDIO tristate "MediaTek HCI SDIO driver" depends on MMC diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index 34887b9b3a85..1a58a3ae142c 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_BT_INTEL) += btintel.o obj-$(CONFIG_BT_ATH3K) += ath3k.o obj-$(CONFIG_BT_MRVL) += btmrvl.o obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o -obj-$(CONFIG_BT_WILINK) += btwilink.o obj-$(CONFIG_BT_MTKSDIO) += btmtksdio.o obj-$(CONFIG_BT_MTKUART) += btmtkuart.o obj-$(CONFIG_BT_QCOMSMD) += btqcomsmd.o diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c deleted file mode 100644 index e55f06e4270f..000000000000 --- a/drivers/bluetooth/btwilink.c +++ /dev/null @@ -1,337 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Texas Instrument's Bluetooth Driver For Shared Transport. - * - * Bluetooth Driver acts as interface between HCI core and - * TI Shared Transport Layer. - * - * Copyright (C) 2009-2010 Texas Instruments - * Author: Raja Mani - * Pavan Savoy - */ - -#include -#include -#include -#include - -#include -#include - -/* Bluetooth Driver Version */ -#define VERSION "1.0" -#define MAX_BT_CHNL_IDS 3 - -/* Number of seconds to wait for registration completion - * when ST returns PENDING status. - */ -#define BT_REGISTER_TIMEOUT 6000 /* 6 sec */ - -/** - * struct ti_st - driver operation structure - * @hdev: hci device pointer which binds to bt driver - * @reg_status: ST registration callback status - * @st_write: write function provided by the ST driver - * to be used by the driver during send_frame. - * @wait_reg_completion - completion sync between ti_st_open - * and st_reg_completion_cb. - */ -struct ti_st { - struct hci_dev *hdev; - int reg_status; - long (*st_write) (struct sk_buff *); - struct completion wait_reg_completion; -}; - -/* Increments HCI counters based on pocket ID (cmd,acl,sco) */ -static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type) -{ - struct hci_dev *hdev = hst->hdev; - - /* Update HCI stat counters */ - switch (pkt_type) { - case HCI_COMMAND_PKT: - hdev->stat.cmd_tx++; - break; - - case HCI_ACLDATA_PKT: - hdev->stat.acl_tx++; - break; - - case HCI_SCODATA_PKT: - hdev->stat.sco_tx++; - break; - } -} - -/* ------- Interfaces to Shared Transport ------ */ - -/* Called by ST layer to indicate protocol registration completion - * status.ti_st_open() function will wait for signal from this - * API when st_register() function returns ST_PENDING. - */ -static void st_reg_completion_cb(void *priv_data, int data) -{ - struct ti_st *lhst = priv_data; - - /* Save registration status for use in ti_st_open() */ - lhst->reg_status = data; - /* complete the wait in ti_st_open() */ - complete(&lhst->wait_reg_completion); -} - -/* Called by Shared Transport layer when receive data is available */ -static long st_receive(void *priv_data, struct sk_buff *skb) -{ - struct ti_st *lhst = priv_data; - int err; - - if (!skb) - return -EFAULT; - - if (!lhst) { - kfree_skb(skb); - return -EFAULT; - } - - /* Forward skb to HCI core layer */ - err = hci_recv_frame(lhst->hdev, skb); - if (err < 0) { - BT_ERR("Unable to push skb to HCI core(%d)", err); - return err; - } - - lhst->hdev->stat.byte_rx += skb->len; - - return 0; -} - -/* ------- Interfaces to HCI layer ------ */ -/* protocol structure registered with shared transport */ -static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = { - { - .chnl_id = HCI_EVENT_PKT, /* HCI Events */ - .hdr_len = sizeof(struct hci_event_hdr), - .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen), - .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */ - .reserve = 8, - }, - { - .chnl_id = HCI_ACLDATA_PKT, /* ACL */ - .hdr_len = sizeof(struct hci_acl_hdr), - .offset_len_in_hdr = offsetof(struct hci_acl_hdr, dlen), - .len_size = 2, /* sizeof(dlen) in struct hci_acl_hdr */ - .reserve = 8, - }, - { - .chnl_id = HCI_SCODATA_PKT, /* SCO */ - .hdr_len = sizeof(struct hci_sco_hdr), - .offset_len_in_hdr = offsetof(struct hci_sco_hdr, dlen), - .len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */ - .reserve = 8, - }, -}; - -/* Called from HCI core to initialize the device */ -static int ti_st_open(struct hci_dev *hdev) -{ - unsigned long timeleft; - struct ti_st *hst; - int err, i; - - BT_DBG("%s %p", hdev->name, hdev); - - /* provide contexts for callbacks from ST */ - hst = hci_get_drvdata(hdev); - - for (i = 0; i < MAX_BT_CHNL_IDS; i++) { - ti_st_proto[i].priv_data = hst; - ti_st_proto[i].max_frame_size = HCI_MAX_FRAME_SIZE; - ti_st_proto[i].recv = st_receive; - ti_st_proto[i].reg_complete_cb = st_reg_completion_cb; - - /* Prepare wait-for-completion handler */ - init_completion(&hst->wait_reg_completion); - /* Reset ST registration callback status flag, - * this value will be updated in - * st_reg_completion_cb() - * function whenever it called from ST driver. - */ - hst->reg_status = -EINPROGRESS; - - err = st_register(&ti_st_proto[i]); - if (!err) - goto done; - - if (err != -EINPROGRESS) { - BT_ERR("st_register failed %d", err); - return err; - } - - /* ST is busy with either protocol - * registration or firmware download. - */ - BT_DBG("waiting for registration " - "completion signal from ST"); - timeleft = wait_for_completion_timeout - (&hst->wait_reg_completion, - msecs_to_jiffies(BT_REGISTER_TIMEOUT)); - if (!timeleft) { - BT_ERR("Timeout(%d sec),didn't get reg " - "completion signal from ST", - BT_REGISTER_TIMEOUT / 1000); - return -ETIMEDOUT; - } - - /* Is ST registration callback - * called with ERROR status? - */ - if (hst->reg_status != 0) { - BT_ERR("ST registration completed with invalid " - "status %d", hst->reg_status); - return -EAGAIN; - } - -done: - hst->st_write = ti_st_proto[i].write; - if (!hst->st_write) { - BT_ERR("undefined ST write function"); - for (i = 0; i < MAX_BT_CHNL_IDS; i++) { - /* Undo registration with ST */ - err = st_unregister(&ti_st_proto[i]); - if (err) - BT_ERR("st_unregister() failed with " - "error %d", err); - hst->st_write = NULL; - } - return -EIO; - } - } - return 0; -} - -/* Close device */ -static int ti_st_close(struct hci_dev *hdev) -{ - int err, i; - struct ti_st *hst = hci_get_drvdata(hdev); - - for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) { - err = st_unregister(&ti_st_proto[i]); - if (err) - BT_ERR("st_unregister(%d) failed with error %d", - ti_st_proto[i].chnl_id, err); - } - - hst->st_write = NULL; - - return err; -} - -static int ti_st_send_frame(struct hci_dev *hdev, struct sk_buff *skb) -{ - struct ti_st *hst; - long len; - int pkt_type; - - hst = hci_get_drvdata(hdev); - - /* Prepend skb with frame type */ - memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); - - BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb), - skb->len); - - /* Insert skb to shared transport layer's transmit queue. - * Freeing skb memory is taken care in shared transport layer, - * so don't free skb memory here. - */ - pkt_type = hci_skb_pkt_type(skb); - len = hst->st_write(skb); - if (len < 0) { - BT_ERR("ST write failed (%ld)", len); - /* Try Again, would only fail if UART has gone bad */ - return -EAGAIN; - } - - /* ST accepted our skb. So, Go ahead and do rest */ - hdev->stat.byte_tx += len; - ti_st_tx_complete(hst, pkt_type); - - return 0; -} - -static int bt_ti_probe(struct platform_device *pdev) -{ - struct ti_st *hst; - struct hci_dev *hdev; - int err; - - hst = devm_kzalloc(&pdev->dev, sizeof(struct ti_st), GFP_KERNEL); - if (!hst) - return -ENOMEM; - - /* Expose "hciX" device to user space */ - hdev = hci_alloc_dev(); - if (!hdev) - return -ENOMEM; - - BT_DBG("hdev %p", hdev); - - hst->hdev = hdev; - hdev->bus = HCI_UART; - hci_set_drvdata(hdev, hst); - hdev->open = ti_st_open; - hdev->close = ti_st_close; - hdev->flush = NULL; - hdev->send = ti_st_send_frame; - - err = hci_register_dev(hdev); - if (err < 0) { - BT_ERR("Can't register HCI device error %d", err); - hci_free_dev(hdev); - return err; - } - - BT_DBG("HCI device registered (hdev %p)", hdev); - - dev_set_drvdata(&pdev->dev, hst); - return 0; -} - -static int bt_ti_remove(struct platform_device *pdev) -{ - struct hci_dev *hdev; - struct ti_st *hst = dev_get_drvdata(&pdev->dev); - - if (!hst) - return -EFAULT; - - BT_DBG("%s", hst->hdev->name); - - hdev = hst->hdev; - ti_st_close(hdev); - hci_unregister_dev(hdev); - - hci_free_dev(hdev); - - dev_set_drvdata(&pdev->dev, NULL); - return 0; -} - -static struct platform_driver btwilink_driver = { - .probe = bt_ti_probe, - .remove = bt_ti_remove, - .driver = { - .name = "btwilink", - }, -}; - -module_platform_driver(btwilink_driver); - -/* ------ Module Info ------ */ - -MODULE_AUTHOR("Raja Mani "); -MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION); -MODULE_VERSION(VERSION); -MODULE_LICENSE("GPL");