diff --git a/Documentation/admin-guide/acpi/cppc_sysfs.rst b/Documentation/admin-guide/acpi/cppc_sysfs.rst index fccf22114e85..e53d76365aa7 100644 --- a/Documentation/admin-guide/acpi/cppc_sysfs.rst +++ b/Documentation/admin-guide/acpi/cppc_sysfs.rst @@ -4,6 +4,8 @@ Collaborative Processor Performance Control (CPPC) ================================================== +.. _cppc_sysfs: + CPPC ==== diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst new file mode 100644 index 000000000000..2f066df4ee9c --- /dev/null +++ b/Documentation/admin-guide/pm/amd-pstate.rst @@ -0,0 +1,382 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: + +=============================================== +``amd-pstate`` CPU Performance Scaling Driver +=============================================== + +:Copyright: |copy| 2021 Advanced Micro Devices, Inc. + +:Author: Huang Rui + + +Introduction +=================== + +``amd-pstate`` is the AMD CPU performance scaling driver that introduces a +new CPU frequency control mechanism on modern AMD APU and CPU series in +Linux kernel. The new mechanism is based on Collaborative Processor +Performance Control (CPPC) which provides finer grain frequency management +than legacy ACPI hardware P-States. Current AMD CPU/APU platforms are using +the ACPI P-states driver to manage CPU frequency and clocks with switching +only in 3 P-states. CPPC replaces the ACPI P-states controls, allows a +flexible, low-latency interface for the Linux kernel to directly +communicate the performance hints to hardware. + +``amd-pstate`` leverages the Linux kernel governors such as ``schedutil``, +``ondemand``, etc. to manage the performance hints which are provided by +CPPC hardware functionality that internally follows the hardware +specification (for details refer to AMD64 Architecture Programmer's Manual +Volume 2: System Programming [1]_). Currently ``amd-pstate`` supports basic +frequency control function according to kernel governors on some of the +Zen2 and Zen3 processors, and we will implement more AMD specific functions +in future after we verify them on the hardware and SBIOS. + + +AMD CPPC Overview +======================= + +Collaborative Processor Performance Control (CPPC) interface enumerates a +continuous, abstract, and unit-less performance value in a scale that is +not tied to a specific performance state / frequency. This is an ACPI +standard [2]_ which software can specify application performance goals and +hints as a relative target to the infrastructure limits. AMD processors +provides the low latency register model (MSR) instead of AML code +interpreter for performance adjustments. ``amd-pstate`` will initialize a +``struct cpufreq_driver`` instance ``amd_pstate_driver`` with the callbacks +to manage each performance update behavior. :: + + Highest Perf ------>+-----------------------+ +-----------------------+ + | | | | + | | | | + | | Max Perf ---->| | + | | | | + | | | | + Nominal Perf ------>+-----------------------+ +-----------------------+ + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + | | Desired Perf ---->| | + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + Lowest non- | | | | + linear perf ------>+-----------------------+ +-----------------------+ + | | | | + | | Lowest perf ---->| | + | | | | + Lowest perf ------>+-----------------------+ +-----------------------+ + | | | | + | | | | + | | | | + 0 ------>+-----------------------+ +-----------------------+ + + AMD P-States Performance Scale + + +.. _perf_cap: + +AMD CPPC Performance Capability +-------------------------------- + +Highest Performance (RO) +......................... + +It is the absolute maximum performance an individual processor may reach, +assuming ideal conditions. This performance level may not be sustainable +for long durations and may only be achievable if other platform components +are in a specific state; for example, it may require other processors be in +an idle state. This would be equivalent to the highest frequencies +supported by the processor. + +Nominal (Guaranteed) Performance (RO) +...................................... + +It is the maximum sustained performance level of the processor, assuming +ideal operating conditions. In absence of an external constraint (power, +thermal, etc.) this is the performance level the processor is expected to +be able to maintain continuously. All cores/processors are expected to be +able to sustain their nominal performance state simultaneously. + +Lowest non-linear Performance (RO) +................................... + +It is the lowest performance level at which nonlinear power savings are +achieved, for example, due to the combined effects of voltage and frequency +scaling. Above this threshold, lower performance levels should be generally +more energy efficient than higher performance levels. This register +effectively conveys the most efficient performance level to ``amd-pstate``. + +Lowest Performance (RO) +........................ + +It is the absolute lowest performance level of the processor. Selecting a +performance level lower than the lowest nonlinear performance level may +cause an efficiency penalty but should reduce the instantaneous power +consumption of the processor. + +AMD CPPC Performance Control +------------------------------ + +``amd-pstate`` passes performance goals through these registers. The +register drives the behavior of the desired performance target. + +Minimum requested performance (RW) +................................... + +``amd-pstate`` specifies the minimum allowed performance level. + +Maximum requested performance (RW) +................................... + +``amd-pstate`` specifies a limit the maximum performance that is expected +to be supplied by the hardware. + +Desired performance target (RW) +................................... + +``amd-pstate`` specifies a desired target in the CPPC performance scale as +a relative number. This can be expressed as percentage of nominal +performance (infrastructure max). Below the nominal sustained performance +level, desired performance expresses the average performance level of the +processor subject to hardware. Above the nominal performance level, +processor must provide at least nominal performance requested and go higher +if current operating conditions allow. + +Energy Performance Preference (EPP) (RW) +......................................... + +Provides a hint to the hardware if software wants to bias toward performance +(0x0) or energy efficiency (0xff). + + +Key Governors Support +======================= + +``amd-pstate`` can be used with all the (generic) scaling governors listed +by the ``scaling_available_governors`` policy attribute in ``sysfs``. Then, +it is responsible for the configuration of policy objects corresponding to +CPUs and provides the ``CPUFreq`` core (and the scaling governors attached +to the policy objects) with accurate information on the maximum and minimum +operating frequencies supported by the hardware. Users can check the +``scaling_cur_freq`` information comes from the ``CPUFreq`` core. + +``amd-pstate`` mainly supports ``schedutil`` and ``ondemand`` for dynamic +frequency control. It is to fine tune the processor configuration on +``amd-pstate`` to the ``schedutil`` with CPU CFS scheduler. ``amd-pstate`` +registers adjust_perf callback to implement the CPPC similar performance +update behavior. It is initialized by ``sugov_start`` and then populate the +CPU's update_util_data pointer to assign ``sugov_update_single_perf`` as +the utilization update callback function in CPU scheduler. CPU scheduler +will call ``cpufreq_update_util`` and assign the target performance +according to the ``struct sugov_cpu`` that utilization update belongs to. +Then ``amd-pstate`` updates the desired performance according to the CPU +scheduler assigned. + + +Processor Support +======================= + +The ``amd-pstate`` initialization will fail if the _CPC in ACPI SBIOS is +not existed at the detected processor, and it uses ``acpi_cpc_valid`` to +check the _CPC existence. All Zen based processors support legacy ACPI +hardware P-States function, so while the ``amd-pstate`` fails to be +initialized, the kernel will fall back to initialize ``acpi-cpufreq`` +driver. + +There are two types of hardware implementations for ``amd-pstate``: one is +`Full MSR Support `_ and another is `Shared Memory Support +`_. It can use :c:macro:`X86_FEATURE_CPPC` feature flag (for +details refer to Processor Programming Reference (PPR) for AMD Family +19h Model 51h, Revision A1 Processors [3]_) to indicate the different +types. ``amd-pstate`` is to register different ``static_call`` instances +for different hardware implementations. + +Currently, some of Zen2 and Zen3 processors support ``amd-pstate``. In the +future, it will be supported on more and more AMD processors. + +Full MSR Support +----------------- + +Some new Zen3 processors such as Cezanne provide the MSR registers directly +while the :c:macro:`X86_FEATURE_CPPC` CPU feature flag is set. +``amd-pstate`` can handle the MSR register to implement the fast switch +function in ``CPUFreq`` that can shrink latency of frequency control on the +interrupt context. The functions with ``pstate_xxx`` prefix represent the +operations of MSR registers. + +Shared Memory Support +---------------------- + +If :c:macro:`X86_FEATURE_CPPC` CPU feature flag is not set, that means the +processor supports shared memory solution. In this case, ``amd-pstate`` +uses the ``cppc_acpi`` helper methods to implement the callback functions +that defined on ``static_call``. The functions with ``cppc_xxx`` prefix +represent the operations of acpi cppc helpers for shared memory solution. + + +AMD P-States and ACPI hardware P-States always can be supported in one +processor. But AMD P-States has the higher priority and if it is enabled +with :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond +to the request from AMD P-States. + + +User Space Interface in ``sysfs`` +================================== + +``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to +control its functionality at the system level. They located in the +``/sys/devices/system/cpu/cpufreq/policyX/`` directory and affect all CPUs. :: + + root@hr-test1:/home/ray# ls /sys/devices/system/cpu/cpufreq/policy0/*amd* + /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_highest_perf + /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_lowest_nonlinear_freq + /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_max_freq + + +``amd_pstate_highest_perf / amd_pstate_max_freq`` + +Maximum CPPC performance and CPU frequency that the driver is allowed to +set in percent of the maximum supported CPPC performance level (the highest +performance supported in `AMD CPPC Performance Capability `_). +In some of ASICs, the highest CPPC performance is not the one in the _CPC +table, so we need to expose it to sysfs. If boost is not active but +supported, this maximum frequency will be larger than the one in +``cpuinfo``. +This attribute is read-only. + +``amd_pstate_lowest_nonlinear_freq`` + +The lowest non-linear CPPC CPU frequency that the driver is allowed to set +in percent of the maximum supported CPPC performance level (Please see the +lowest non-linear performance in `AMD CPPC Performance Capability +`_). +This attribute is read-only. + +For other performance and frequency values, we can read them back from +``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`. + + +``amd-pstate`` vs ``acpi-cpufreq`` +====================================== + +On majority of AMD platforms supported by ``acpi-cpufreq``, the ACPI tables +provided by the platform firmware used for CPU performance scaling, but +only provides 3 P-states on AMD processors. +However, on modern AMD APU and CPU series, it provides the collaborative +processor performance control according to ACPI protocol and customize this +for AMD platforms. That is fine-grain and continuous frequency range +instead of the legacy hardware P-states. ``amd-pstate`` is the kernel +module which supports the new AMD P-States mechanism on most of future AMD +platforms. The AMD P-States mechanism will be the more performance and energy +efficiency frequency management method on AMD processors. + +Kernel Module Options for ``amd-pstate`` +========================================= + +``shared_mem`` +Use a module param (shared_mem) to enable related processors manually with +**amd_pstate.shared_mem=1**. +Due to the performance issue on the processors with `Shared Memory Support +`_, so we disable it for the moment and will enable this by default +once we address performance issue on this solution. + +The way to check whether current processor is `Full MSR Support `_ +or `Shared Memory Support `_ : :: + + ray@hr-test1:~$ lscpu | grep cppc + Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr rdpru wbnoinvd cppc arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl umip pku ospke vaes vpclmulqdq rdpid overflow_recov succor smca fsrm + +If CPU Flags have cppc, then this processor supports `Full MSR Support +`_. Otherwise it supports `Shared Memory Support `_. + + +``cpupower`` tool support for ``amd-pstate`` +=============================================== + +``amd-pstate`` is supported on ``cpupower`` tool that can be used to dump the frequency +information. And it is in progress to support more and more operations for new +``amd-pstate`` module with this tool. :: + + root@hr-test1:/home/ray# cpupower frequency-info + analyzing CPU 0: + driver: amd-pstate + CPUs which run at the same hardware frequency: 0 + CPUs which need to have their frequency coordinated by software: 0 + maximum transition latency: 131 us + hardware limits: 400 MHz - 4.68 GHz + available cpufreq governors: ondemand conservative powersave userspace performance schedutil + current policy: frequency should be within 400 MHz and 4.68 GHz. + The governor "schedutil" may decide which speed to use + within this range. + current CPU frequency: Unable to call hardware + current CPU frequency: 4.02 GHz (asserted by call to kernel) + boost state support: + Supported: yes + Active: yes + AMD PSTATE Highest Performance: 166. Maximum Frequency: 4.68 GHz. + AMD PSTATE Nominal Performance: 117. Nominal Frequency: 3.30 GHz. + AMD PSTATE Lowest Non-linear Performance: 39. Lowest Non-linear Frequency: 1.10 GHz. + AMD PSTATE Lowest Performance: 15. Lowest Frequency: 400 MHz. + + +Diagnostics and Tuning +======================= + +Trace Events +-------------- + +There are two static trace events that can be used for ``amd-pstate`` +diagnostics. One of them is the cpu_frequency trace event generally used +by ``CPUFreq``, and the other one is the ``amd_pstate_perf`` trace event +specific to ``amd-pstate``. The following sequence of shell commands can +be used to enable them and see their output (if the kernel is generally +configured to support event tracing). :: + + root@hr-test1:/home/ray# cd /sys/kernel/tracing/ + root@hr-test1:/sys/kernel/tracing# echo 1 > events/amd_cpu/enable + root@hr-test1:/sys/kernel/tracing# cat trace + # tracer: nop + # + # entries-in-buffer/entries-written: 47827/42233061 #P:2 + # + # _-----=> irqs-off + # / _----=> need-resched + # | / _---=> hardirq/softirq + # || / _--=> preempt-depth + # ||| / delay + # TASK-PID CPU# |||| TIMESTAMP FUNCTION + # | | | |||| | | + -0 [015] dN... 4995.979886: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=15 changed=false fast_switch=true + -0 [007] d.h.. 4995.979893: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true + cat-2161 [000] d.... 4995.980841: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=0 changed=false fast_switch=true + sshd-2125 [004] d.s.. 4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=4 changed=false fast_switch=true + -0 [007] d.s.. 4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true + -0 [003] d.s.. 4995.980971: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=3 changed=false fast_switch=true + -0 [011] d.s.. 4995.980996: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=11 changed=false fast_switch=true + +The cpu_frequency trace event will be triggered either by the ``schedutil`` scaling +governor (for the policies it is attached to), or by the ``CPUFreq`` core (for the +policies with other scaling governors). + + +Reference +=========== + +.. [1] AMD64 Architecture Programmer's Manual Volume 2: System Programming, + https://www.amd.com/system/files/TechDocs/24593.pdf + +.. [2] Advanced Configuration and Power Interface Specification, + https://uefi.org/sites/default/files/resources/ACPI_Spec_6_4_Jan22.pdf + +.. [3] Processor Programming Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors + https://www.amd.com/system/files/TechDocs/56569-A1-PUB.zip diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst index f40994c422dc..5d2757e2de65 100644 --- a/Documentation/admin-guide/pm/working-state.rst +++ b/Documentation/admin-guide/pm/working-state.rst @@ -11,6 +11,7 @@ Working-State Power Management intel_idle cpufreq intel_pstate + amd-pstate cpufreq_drivers intel_epb intel-speed-select diff --git a/MAINTAINERS b/MAINTAINERS index fb18ce7168aa..f4524460eef3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -993,6 +993,13 @@ S: Supported T: git https://gitlab.freedesktop.org/agd5f/linux.git F: drivers/gpu/drm/amd/pm/ +AMD PSTATE DRIVER +M: Huang Rui +L: linux-pm@vger.kernel.org +S: Supported +F: Documentation/admin-guide/pm/amd-pstate.rst +F: drivers/cpufreq/amd-pstate* + AMD PTDMA DRIVER M: Sanjay R Mehta L: dmaengine@vger.kernel.org diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index 470299ee2fba..c7d2510e5a78 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -23,7 +23,7 @@ /* Replace task scheduler's default thermal pressure API */ #define arch_scale_thermal_pressure topology_get_thermal_pressure -#define arch_set_thermal_pressure topology_set_thermal_pressure +#define arch_update_thermal_pressure topology_update_thermal_pressure #else diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h index ec2db3419c41..f386b90a79c8 100644 --- a/arch/arm64/include/asm/topology.h +++ b/arch/arm64/include/asm/topology.h @@ -32,7 +32,7 @@ void update_freq_counters_refs(void); /* Replace task scheduler's default thermal pressure API */ #define arch_scale_thermal_pressure topology_get_thermal_pressure -#define arch_set_thermal_pressure topology_set_thermal_pressure +#define arch_update_thermal_pressure topology_update_thermal_pressure #include diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index d5b5f2ab87a0..18de5f76f198 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -315,6 +315,7 @@ #define X86_FEATURE_AMD_SSBD (13*32+24) /* "" Speculative Store Bypass Disable */ #define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */ #define X86_FEATURE_AMD_SSB_NO (13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */ +#define X86_FEATURE_CPPC (13*32+27) /* Collaborative Processor Performance Control */ /* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */ #define X86_FEATURE_DTHERM (14*32+ 0) /* Digital Thermal Sensor */ diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 01e2650b9585..3faf0f97edb1 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -486,6 +486,23 @@ #define MSR_AMD64_VIRT_SPEC_CTRL 0xc001011f +/* AMD Collaborative Processor Performance Control MSRs */ +#define MSR_AMD_CPPC_CAP1 0xc00102b0 +#define MSR_AMD_CPPC_ENABLE 0xc00102b1 +#define MSR_AMD_CPPC_CAP2 0xc00102b2 +#define MSR_AMD_CPPC_REQ 0xc00102b3 +#define MSR_AMD_CPPC_STATUS 0xc00102b4 + +#define AMD_CPPC_LOWEST_PERF(x) (((x) >> 0) & 0xff) +#define AMD_CPPC_LOWNONLIN_PERF(x) (((x) >> 8) & 0xff) +#define AMD_CPPC_NOMINAL_PERF(x) (((x) >> 16) & 0xff) +#define AMD_CPPC_HIGHEST_PERF(x) (((x) >> 24) & 0xff) + +#define AMD_CPPC_MAX_PERF(x) (((x) & 0xff) << 0) +#define AMD_CPPC_MIN_PERF(x) (((x) & 0xff) << 8) +#define AMD_CPPC_DES_PERF(x) (((x) & 0xff) << 16) +#define AMD_CPPC_ENERGY_PERF_PREF(x) (((x) & 0xff) << 24) + /* Fam 17h MSRs */ #define MSR_F17H_IRPERF 0xc00000e9 diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index cc164777e661..2f0b6be8eaab 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -221,7 +221,7 @@ static inline void arch_set_max_freq_ratio(bool turbo_disabled) } #endif -#ifdef CONFIG_ACPI_CPPC_LIB +#if defined(CONFIG_ACPI_CPPC_LIB) && defined(CONFIG_SMP) void init_freq_invariance_cppc(void); #define init_freq_invariance_cppc init_freq_invariance_cppc #endif diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index b62c87b8ce4a..e4fd5a8237e2 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -118,6 +118,8 @@ static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr); */ #define NUM_RETRIES 500ULL +#define OVER_16BTS_MASK ~0xFFFFULL + #define define_one_cppc_ro(_name) \ static struct kobj_attribute _name = \ __ATTR(_name, 0444, show_##_name, NULL) @@ -411,7 +413,7 @@ bool acpi_cpc_valid(void) struct cpc_desc *cpc_ptr; int cpu; - for_each_possible_cpu(cpu) { + for_each_present_cpu(cpu) { cpc_ptr = per_cpu(cpc_desc_ptr, cpu); if (!cpc_ptr) return false; @@ -746,9 +748,26 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) goto out_free; cpc_ptr->cpc_regs[i-2].sys_mem_vaddr = addr; } + } else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_IO) { + if (gas_t->access_width < 1 || gas_t->access_width > 3) { + /* + * 1 = 8-bit, 2 = 16-bit, and 3 = 32-bit. + * SystemIO doesn't implement 64-bit + * registers. + */ + pr_debug("Invalid access width %d for SystemIO register\n", + gas_t->access_width); + goto out_free; + } + if (gas_t->address & OVER_16BTS_MASK) { + /* SystemIO registers use 16-bit integer addresses */ + pr_debug("Invalid IO port %llu for SystemIO register\n", + gas_t->address); + goto out_free; + } } else { if (gas_t->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE || !cpc_ffh_supported()) { - /* Support only PCC ,SYS MEM and FFH type regs */ + /* Support only PCC, SystemMemory, SystemIO, and FFH type regs. */ pr_debug("Unsupported register type: %d\n", gas_t->space_id); goto out_free; } @@ -923,7 +942,21 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val) } *val = 0; - if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) + + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) { + u32 width = 8 << (reg->access_width - 1); + acpi_status status; + + status = acpi_os_read_port((acpi_io_address)reg->address, + (u32 *)val, width); + if (ACPI_FAILURE(status)) { + pr_debug("Error: Failed to read SystemIO port %llx\n", + reg->address); + return -EFAULT; + } + + return 0; + } else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id); else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) vaddr = reg_res->sys_mem_vaddr; @@ -962,7 +995,20 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val) int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); struct cpc_reg *reg = ®_res->cpc_entry.reg; - if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) { + u32 width = 8 << (reg->access_width - 1); + acpi_status status; + + status = acpi_os_write_port((acpi_io_address)reg->address, + (u32)val, width); + if (ACPI_FAILURE(status)) { + pr_debug("Error: Failed to write SystemIO port %llx\n", + reg->address); + return -EFAULT; + } + + return 0; + } else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id); else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) vaddr = reg_res->sys_mem_vaddr; @@ -1229,6 +1275,51 @@ out_err: } EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs); +/** + * cppc_set_enable - Set to enable CPPC on the processor by writing the + * Continuous Performance Control package EnableRegister field. + * @cpu: CPU for which to enable CPPC register. + * @enable: 0 - disable, 1 - enable CPPC feature on the processor. + * + * Return: 0 for success, -ERRNO or -EIO otherwise. + */ +int cppc_set_enable(int cpu, bool enable) +{ + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); + struct cpc_register_resource *enable_reg; + struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu); + struct cppc_pcc_data *pcc_ss_data = NULL; + int ret = -EINVAL; + + if (!cpc_desc) { + pr_debug("No CPC descriptor for CPU:%d\n", cpu); + return -EINVAL; + } + + enable_reg = &cpc_desc->cpc_regs[ENABLE]; + + if (CPC_IN_PCC(enable_reg)) { + + if (pcc_ss_id < 0) + return -EIO; + + ret = cpc_write(cpu, enable_reg, enable); + if (ret) + return ret; + + pcc_ss_data = pcc_data[pcc_ss_id]; + + down_write(&pcc_ss_data->pcc_lock); + /* after writing CPC, transfer the ownership of PCC to platfrom */ + ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE); + up_write(&pcc_ss_data->pcc_lock); + return ret; + } + + return cpc_write(cpu, enable_reg, enable); +} +EXPORT_SYMBOL_GPL(cppc_set_enable); + /** * cppc_set_perf - Set a CPU's performance controls. * @cpu: CPU for which to set performance controls. diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c index ff16a36a908b..976154140f0b 100644 --- a/drivers/base/arch_topology.c +++ b/drivers/base/arch_topology.c @@ -22,6 +22,7 @@ static DEFINE_PER_CPU(struct scale_freq_data __rcu *, sft_data); static struct cpumask scale_freq_counters_mask; static bool scale_freq_invariant; +static DEFINE_PER_CPU(u32, freq_factor) = 1; static bool supports_scale_freq_counters(const struct cpumask *cpus) { @@ -155,15 +156,49 @@ void topology_set_cpu_scale(unsigned int cpu, unsigned long capacity) DEFINE_PER_CPU(unsigned long, thermal_pressure); -void topology_set_thermal_pressure(const struct cpumask *cpus, - unsigned long th_pressure) +/** + * topology_update_thermal_pressure() - Update thermal pressure for CPUs + * @cpus : The related CPUs for which capacity has been reduced + * @capped_freq : The maximum allowed frequency that CPUs can run at + * + * Update the value of thermal pressure for all @cpus in the mask. The + * cpumask should include all (online+offline) affected CPUs, to avoid + * operating on stale data when hot-plug is used for some CPUs. The + * @capped_freq reflects the currently allowed max CPUs frequency due to + * thermal capping. It might be also a boost frequency value, which is bigger + * than the internal 'freq_factor' max frequency. In such case the pressure + * value should simply be removed, since this is an indication that there is + * no thermal throttling. The @capped_freq must be provided in kHz. + */ +void topology_update_thermal_pressure(const struct cpumask *cpus, + unsigned long capped_freq) { + unsigned long max_capacity, capacity, th_pressure; + u32 max_freq; int cpu; + cpu = cpumask_first(cpus); + max_capacity = arch_scale_cpu_capacity(cpu); + max_freq = per_cpu(freq_factor, cpu); + + /* Convert to MHz scale which is used in 'freq_factor' */ + capped_freq /= 1000; + + /* + * Handle properly the boost frequencies, which should simply clean + * the thermal pressure value. + */ + if (max_freq <= capped_freq) + capacity = max_capacity; + else + capacity = mult_frac(max_capacity, capped_freq, max_freq); + + th_pressure = max_capacity - capacity; + for_each_cpu(cpu, cpus) WRITE_ONCE(per_cpu(thermal_pressure, cpu), th_pressure); } -EXPORT_SYMBOL_GPL(topology_set_thermal_pressure); +EXPORT_SYMBOL_GPL(topology_update_thermal_pressure); static ssize_t cpu_capacity_show(struct device *dev, struct device_attribute *attr, @@ -217,7 +252,6 @@ static void update_topology_flags_workfn(struct work_struct *work) update_topology = 0; } -static DEFINE_PER_CPU(u32, freq_factor) = 1; static u32 *raw_capacity; static int free_raw_capacity(void) diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 92701a18bdd9..55516043b656 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -34,6 +34,23 @@ config X86_PCC_CPUFREQ If in doubt, say N. +config X86_AMD_PSTATE + tristate "AMD Processor P-State driver" + depends on X86 && ACPI + select ACPI_PROCESSOR + select ACPI_CPPC_LIB if X86_64 + select CPU_FREQ_GOV_SCHEDUTIL if SMP + help + This driver adds a CPUFreq driver which utilizes a fine grain + processor performance frequency control range instead of legacy + performance levels. _CPC needs to be present in the ACPI tables + of the system. + + For details, take a look at: + . + + If in doubt, say N. + config X86_ACPI_CPUFREQ tristate "ACPI Processor P-States driver" depends on ACPI_PROCESSOR diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 48ee5859030c..285de70af877 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -17,6 +17,10 @@ obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET) += cpufreq_governor_attr_set.o obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o +# Traces +CFLAGS_amd-pstate-trace.o := -I$(src) +amd_pstate-y := amd-pstate.o amd-pstate-trace.o + ################################################################################## # x86 drivers. # Link order matters. K8 is preferred to ACPI because of firmware bugs in early @@ -25,6 +29,7 @@ obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o # speedstep-* is preferred over p4-clockmod. obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o +obj-$(CONFIG_X86_AMD_PSTATE) += amd_pstate.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o diff --git a/drivers/cpufreq/amd-pstate-trace.c b/drivers/cpufreq/amd-pstate-trace.c new file mode 100644 index 000000000000..891b696dcd69 --- /dev/null +++ b/drivers/cpufreq/amd-pstate-trace.c @@ -0,0 +1,2 @@ +#define CREATE_TRACE_POINTS +#include "amd-pstate-trace.h" diff --git a/drivers/cpufreq/amd-pstate-trace.h b/drivers/cpufreq/amd-pstate-trace.h new file mode 100644 index 000000000000..647505957d4f --- /dev/null +++ b/drivers/cpufreq/amd-pstate-trace.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * amd-pstate-trace.h - AMD Processor P-state Frequency Driver Tracer + * + * Copyright (C) 2021 Advanced Micro Devices, Inc. All Rights Reserved. + * + * Author: Huang Rui + */ + +#if !defined(_AMD_PSTATE_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) +#define _AMD_PSTATE_TRACE_H + +#include +#include +#include + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM amd_cpu + +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE amd-pstate-trace + +#define TPS(x) tracepoint_string(x) + +TRACE_EVENT(amd_pstate_perf, + + TP_PROTO(unsigned long min_perf, + unsigned long target_perf, + unsigned long capacity, + unsigned int cpu_id, + bool changed, + bool fast_switch + ), + + TP_ARGS(min_perf, + target_perf, + capacity, + cpu_id, + changed, + fast_switch + ), + + TP_STRUCT__entry( + __field(unsigned long, min_perf) + __field(unsigned long, target_perf) + __field(unsigned long, capacity) + __field(unsigned int, cpu_id) + __field(bool, changed) + __field(bool, fast_switch) + ), + + TP_fast_assign( + __entry->min_perf = min_perf; + __entry->target_perf = target_perf; + __entry->capacity = capacity; + __entry->cpu_id = cpu_id; + __entry->changed = changed; + __entry->fast_switch = fast_switch; + ), + + TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu cpu_id=%u changed=%s fast_switch=%s", + (unsigned long)__entry->min_perf, + (unsigned long)__entry->target_perf, + (unsigned long)__entry->capacity, + (unsigned int)__entry->cpu_id, + (__entry->changed) ? "true" : "false", + (__entry->fast_switch) ? "true" : "false" + ) +); + +#endif /* _AMD_PSTATE_TRACE_H */ + +/* This part must be outside protection */ +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . + +#include diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c new file mode 100644 index 000000000000..9ce75ed11f8e --- /dev/null +++ b/drivers/cpufreq/amd-pstate.c @@ -0,0 +1,645 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * amd-pstate.c - AMD Processor P-state Frequency Driver + * + * Copyright (C) 2021 Advanced Micro Devices, Inc. All Rights Reserved. + * + * Author: Huang Rui + * + * AMD P-State introduces a new CPU performance scaling design for AMD + * processors using the ACPI Collaborative Performance and Power Control (CPPC) + * feature which works with the AMD SMU firmware providing a finer grained + * frequency control range. It is to replace the legacy ACPI P-States control, + * allows a flexible, low-latency interface for the Linux kernel to directly + * communicate the performance hints to hardware. + * + * AMD P-State is supported on recent AMD Zen base CPU series include some of + * Zen2 and Zen3 processors. _CPC needs to be present in the ACPI tables of AMD + * P-State supported system. And there are two types of hardware implementations + * for AMD P-State: 1) Full MSR Solution and 2) Shared Memory Solution. + * X86_FEATURE_CPPC CPU feature flag is used to distinguish the different types. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include "amd-pstate-trace.h" + +#define AMD_PSTATE_TRANSITION_LATENCY 0x20000 +#define AMD_PSTATE_TRANSITION_DELAY 500 + +/* + * TODO: We need more time to fine tune processors with shared memory solution + * with community together. + * + * There are some performance drops on the CPU benchmarks which reports from + * Suse. We are co-working with them to fine tune the shared memory solution. So + * we disable it by default to go acpi-cpufreq on these processors and add a + * module parameter to be able to enable it manually for debugging. + */ +static bool shared_mem = false; +module_param(shared_mem, bool, 0444); +MODULE_PARM_DESC(shared_mem, + "enable amd-pstate on processors with shared memory solution (false = disabled (default), true = enabled)"); + +static struct cpufreq_driver amd_pstate_driver; + +/** + * struct amd_cpudata - private CPU data for AMD P-State + * @cpu: CPU number + * @req: constraint request to apply + * @cppc_req_cached: cached performance request hints + * @highest_perf: the maximum performance an individual processor may reach, + * assuming ideal conditions + * @nominal_perf: the maximum sustained performance level of the processor, + * assuming ideal operating conditions + * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power + * savings are achieved + * @lowest_perf: the absolute lowest performance level of the processor + * @max_freq: the frequency that mapped to highest_perf + * @min_freq: the frequency that mapped to lowest_perf + * @nominal_freq: the frequency that mapped to nominal_perf + * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf + * @boost_supported: check whether the Processor or SBIOS supports boost mode + * + * The amd_cpudata is key private data for each CPU thread in AMD P-State, and + * represents all the attributes and goals that AMD P-State requests at runtime. + */ +struct amd_cpudata { + int cpu; + + struct freq_qos_request req[2]; + u64 cppc_req_cached; + + u32 highest_perf; + u32 nominal_perf; + u32 lowest_nonlinear_perf; + u32 lowest_perf; + + u32 max_freq; + u32 min_freq; + u32 nominal_freq; + u32 lowest_nonlinear_freq; + + bool boost_supported; +}; + +static inline int pstate_enable(bool enable) +{ + return wrmsrl_safe(MSR_AMD_CPPC_ENABLE, enable); +} + +static int cppc_enable(bool enable) +{ + int cpu, ret = 0; + + for_each_present_cpu(cpu) { + ret = cppc_set_enable(cpu, enable); + if (ret) + return ret; + } + + return ret; +} + +DEFINE_STATIC_CALL(amd_pstate_enable, pstate_enable); + +static inline int amd_pstate_enable(bool enable) +{ + return static_call(amd_pstate_enable)(enable); +} + +static int pstate_init_perf(struct amd_cpudata *cpudata) +{ + u64 cap1; + + int ret = rdmsrl_safe_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1, + &cap1); + if (ret) + return ret; + + /* + * TODO: Introduce AMD specific power feature. + * + * CPPC entry doesn't indicate the highest performance in some ASICs. + */ + WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf()); + + WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1)); + WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1)); + WRITE_ONCE(cpudata->lowest_perf, AMD_CPPC_LOWEST_PERF(cap1)); + + return 0; +} + +static int cppc_init_perf(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf()); + + WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf); + WRITE_ONCE(cpudata->lowest_nonlinear_perf, + cppc_perf.lowest_nonlinear_perf); + WRITE_ONCE(cpudata->lowest_perf, cppc_perf.lowest_perf); + + return 0; +} + +DEFINE_STATIC_CALL(amd_pstate_init_perf, pstate_init_perf); + +static inline int amd_pstate_init_perf(struct amd_cpudata *cpudata) +{ + return static_call(amd_pstate_init_perf)(cpudata); +} + +static void pstate_update_perf(struct amd_cpudata *cpudata, u32 min_perf, + u32 des_perf, u32 max_perf, bool fast_switch) +{ + if (fast_switch) + wrmsrl(MSR_AMD_CPPC_REQ, READ_ONCE(cpudata->cppc_req_cached)); + else + wrmsrl_on_cpu(cpudata->cpu, MSR_AMD_CPPC_REQ, + READ_ONCE(cpudata->cppc_req_cached)); +} + +static void cppc_update_perf(struct amd_cpudata *cpudata, + u32 min_perf, u32 des_perf, + u32 max_perf, bool fast_switch) +{ + struct cppc_perf_ctrls perf_ctrls; + + perf_ctrls.max_perf = max_perf; + perf_ctrls.min_perf = min_perf; + perf_ctrls.desired_perf = des_perf; + + cppc_set_perf(cpudata->cpu, &perf_ctrls); +} + +DEFINE_STATIC_CALL(amd_pstate_update_perf, pstate_update_perf); + +static inline void amd_pstate_update_perf(struct amd_cpudata *cpudata, + u32 min_perf, u32 des_perf, + u32 max_perf, bool fast_switch) +{ + static_call(amd_pstate_update_perf)(cpudata, min_perf, des_perf, + max_perf, fast_switch); +} + +static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf, + u32 des_perf, u32 max_perf, bool fast_switch) +{ + u64 prev = READ_ONCE(cpudata->cppc_req_cached); + u64 value = prev; + + value &= ~AMD_CPPC_MIN_PERF(~0L); + value |= AMD_CPPC_MIN_PERF(min_perf); + + value &= ~AMD_CPPC_DES_PERF(~0L); + value |= AMD_CPPC_DES_PERF(des_perf); + + value &= ~AMD_CPPC_MAX_PERF(~0L); + value |= AMD_CPPC_MAX_PERF(max_perf); + + trace_amd_pstate_perf(min_perf, des_perf, max_perf, + cpudata->cpu, (value != prev), fast_switch); + + if (value == prev) + return; + + WRITE_ONCE(cpudata->cppc_req_cached, value); + + amd_pstate_update_perf(cpudata, min_perf, des_perf, + max_perf, fast_switch); +} + +static int amd_pstate_verify(struct cpufreq_policy_data *policy) +{ + cpufreq_verify_within_cpu_limits(policy); + + return 0; +} + +static int amd_pstate_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + struct amd_cpudata *cpudata = policy->driver_data; + unsigned long max_perf, min_perf, des_perf, cap_perf; + + if (!cpudata->max_freq) + return -ENODEV; + + cap_perf = READ_ONCE(cpudata->highest_perf); + min_perf = READ_ONCE(cpudata->lowest_nonlinear_perf); + max_perf = cap_perf; + + freqs.old = policy->cur; + freqs.new = target_freq; + + des_perf = DIV_ROUND_CLOSEST(target_freq * cap_perf, + cpudata->max_freq); + + cpufreq_freq_transition_begin(policy, &freqs); + amd_pstate_update(cpudata, min_perf, des_perf, + max_perf, false); + cpufreq_freq_transition_end(policy, &freqs, false); + + return 0; +} + +static void amd_pstate_adjust_perf(unsigned int cpu, + unsigned long _min_perf, + unsigned long target_perf, + unsigned long capacity) +{ + unsigned long max_perf, min_perf, des_perf, + cap_perf, lowest_nonlinear_perf; + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + struct amd_cpudata *cpudata = policy->driver_data; + + cap_perf = READ_ONCE(cpudata->highest_perf); + lowest_nonlinear_perf = READ_ONCE(cpudata->lowest_nonlinear_perf); + + des_perf = cap_perf; + if (target_perf < capacity) + des_perf = DIV_ROUND_UP(cap_perf * target_perf, capacity); + + min_perf = READ_ONCE(cpudata->highest_perf); + if (_min_perf < capacity) + min_perf = DIV_ROUND_UP(cap_perf * _min_perf, capacity); + + if (min_perf < lowest_nonlinear_perf) + min_perf = lowest_nonlinear_perf; + + max_perf = cap_perf; + if (max_perf < min_perf) + max_perf = min_perf; + + des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf); + + amd_pstate_update(cpudata, min_perf, des_perf, max_perf, true); +} + +static int amd_get_min_freq(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + /* Switch to khz */ + return cppc_perf.lowest_freq * 1000; +} + +static int amd_get_max_freq(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + u32 max_perf, max_freq, nominal_freq, nominal_perf; + u64 boost_ratio; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + nominal_freq = cppc_perf.nominal_freq; + nominal_perf = READ_ONCE(cpudata->nominal_perf); + max_perf = READ_ONCE(cpudata->highest_perf); + + boost_ratio = div_u64(max_perf << SCHED_CAPACITY_SHIFT, + nominal_perf); + + max_freq = nominal_freq * boost_ratio >> SCHED_CAPACITY_SHIFT; + + /* Switch to khz */ + return max_freq * 1000; +} + +static int amd_get_nominal_freq(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + /* Switch to khz */ + return cppc_perf.nominal_freq * 1000; +} + +static int amd_get_lowest_nonlinear_freq(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + u32 lowest_nonlinear_freq, lowest_nonlinear_perf, + nominal_freq, nominal_perf; + u64 lowest_nonlinear_ratio; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + nominal_freq = cppc_perf.nominal_freq; + nominal_perf = READ_ONCE(cpudata->nominal_perf); + + lowest_nonlinear_perf = cppc_perf.lowest_nonlinear_perf; + + lowest_nonlinear_ratio = div_u64(lowest_nonlinear_perf << SCHED_CAPACITY_SHIFT, + nominal_perf); + + lowest_nonlinear_freq = nominal_freq * lowest_nonlinear_ratio >> SCHED_CAPACITY_SHIFT; + + /* Switch to khz */ + return lowest_nonlinear_freq * 1000; +} + +static int amd_pstate_set_boost(struct cpufreq_policy *policy, int state) +{ + struct amd_cpudata *cpudata = policy->driver_data; + int ret; + + if (!cpudata->boost_supported) { + pr_err("Boost mode is not supported by this processor or SBIOS\n"); + return -EINVAL; + } + + if (state) + policy->cpuinfo.max_freq = cpudata->max_freq; + else + policy->cpuinfo.max_freq = cpudata->nominal_freq; + + policy->max = policy->cpuinfo.max_freq; + + ret = freq_qos_update_request(&cpudata->req[1], + policy->cpuinfo.max_freq); + if (ret < 0) + return ret; + + return 0; +} + +static void amd_pstate_boost_init(struct amd_cpudata *cpudata) +{ + u32 highest_perf, nominal_perf; + + highest_perf = READ_ONCE(cpudata->highest_perf); + nominal_perf = READ_ONCE(cpudata->nominal_perf); + + if (highest_perf <= nominal_perf) + return; + + cpudata->boost_supported = true; + amd_pstate_driver.boost_enabled = true; +} + +static int amd_pstate_cpu_init(struct cpufreq_policy *policy) +{ + int min_freq, max_freq, nominal_freq, lowest_nonlinear_freq, ret; + struct device *dev; + struct amd_cpudata *cpudata; + + dev = get_cpu_device(policy->cpu); + if (!dev) + return -ENODEV; + + cpudata = kzalloc(sizeof(*cpudata), GFP_KERNEL); + if (!cpudata) + return -ENOMEM; + + cpudata->cpu = policy->cpu; + + ret = amd_pstate_init_perf(cpudata); + if (ret) + goto free_cpudata1; + + min_freq = amd_get_min_freq(cpudata); + max_freq = amd_get_max_freq(cpudata); + nominal_freq = amd_get_nominal_freq(cpudata); + lowest_nonlinear_freq = amd_get_lowest_nonlinear_freq(cpudata); + + if (min_freq < 0 || max_freq < 0 || min_freq > max_freq) { + dev_err(dev, "min_freq(%d) or max_freq(%d) value is incorrect\n", + min_freq, max_freq); + ret = -EINVAL; + goto free_cpudata1; + } + + policy->cpuinfo.transition_latency = AMD_PSTATE_TRANSITION_LATENCY; + policy->transition_delay_us = AMD_PSTATE_TRANSITION_DELAY; + + policy->min = min_freq; + policy->max = max_freq; + + policy->cpuinfo.min_freq = min_freq; + policy->cpuinfo.max_freq = max_freq; + + /* It will be updated by governor */ + policy->cur = policy->cpuinfo.min_freq; + + if (boot_cpu_has(X86_FEATURE_CPPC)) + policy->fast_switch_possible = true; + + ret = freq_qos_add_request(&policy->constraints, &cpudata->req[0], + FREQ_QOS_MIN, policy->cpuinfo.min_freq); + if (ret < 0) { + dev_err(dev, "Failed to add min-freq constraint (%d)\n", ret); + goto free_cpudata1; + } + + ret = freq_qos_add_request(&policy->constraints, &cpudata->req[1], + FREQ_QOS_MAX, policy->cpuinfo.max_freq); + if (ret < 0) { + dev_err(dev, "Failed to add max-freq constraint (%d)\n", ret); + goto free_cpudata2; + } + + /* Initial processor data capability frequencies */ + cpudata->max_freq = max_freq; + cpudata->min_freq = min_freq; + cpudata->nominal_freq = nominal_freq; + cpudata->lowest_nonlinear_freq = lowest_nonlinear_freq; + + policy->driver_data = cpudata; + + amd_pstate_boost_init(cpudata); + + return 0; + +free_cpudata2: + freq_qos_remove_request(&cpudata->req[0]); +free_cpudata1: + kfree(cpudata); + return ret; +} + +static int amd_pstate_cpu_exit(struct cpufreq_policy *policy) +{ + struct amd_cpudata *cpudata; + + cpudata = policy->driver_data; + + freq_qos_remove_request(&cpudata->req[1]); + freq_qos_remove_request(&cpudata->req[0]); + kfree(cpudata); + + return 0; +} + +/* Sysfs attributes */ + +/* + * This frequency is to indicate the maximum hardware frequency. + * If boost is not active but supported, the frequency will be larger than the + * one in cpuinfo. + */ +static ssize_t show_amd_pstate_max_freq(struct cpufreq_policy *policy, + char *buf) +{ + int max_freq; + struct amd_cpudata *cpudata; + + cpudata = policy->driver_data; + + max_freq = amd_get_max_freq(cpudata); + if (max_freq < 0) + return max_freq; + + return sprintf(&buf[0], "%u\n", max_freq); +} + +static ssize_t show_amd_pstate_lowest_nonlinear_freq(struct cpufreq_policy *policy, + char *buf) +{ + int freq; + struct amd_cpudata *cpudata; + + cpudata = policy->driver_data; + + freq = amd_get_lowest_nonlinear_freq(cpudata); + if (freq < 0) + return freq; + + return sprintf(&buf[0], "%u\n", freq); +} + +/* + * In some of ASICs, the highest_perf is not the one in the _CPC table, so we + * need to expose it to sysfs. + */ +static ssize_t show_amd_pstate_highest_perf(struct cpufreq_policy *policy, + char *buf) +{ + u32 perf; + struct amd_cpudata *cpudata = policy->driver_data; + + perf = READ_ONCE(cpudata->highest_perf); + + return sprintf(&buf[0], "%u\n", perf); +} + +cpufreq_freq_attr_ro(amd_pstate_max_freq); +cpufreq_freq_attr_ro(amd_pstate_lowest_nonlinear_freq); + +cpufreq_freq_attr_ro(amd_pstate_highest_perf); + +static struct freq_attr *amd_pstate_attr[] = { + &amd_pstate_max_freq, + &amd_pstate_lowest_nonlinear_freq, + &amd_pstate_highest_perf, + NULL, +}; + +static struct cpufreq_driver amd_pstate_driver = { + .flags = CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_UPDATE_LIMITS, + .verify = amd_pstate_verify, + .target = amd_pstate_target, + .init = amd_pstate_cpu_init, + .exit = amd_pstate_cpu_exit, + .set_boost = amd_pstate_set_boost, + .name = "amd-pstate", + .attr = amd_pstate_attr, +}; + +static int __init amd_pstate_init(void) +{ + int ret; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return -ENODEV; + + if (!acpi_cpc_valid()) { + pr_debug("the _CPC object is not present in SBIOS\n"); + return -ENODEV; + } + + /* don't keep reloading if cpufreq_driver exists */ + if (cpufreq_get_current_driver()) + return -EEXIST; + + /* capability check */ + if (boot_cpu_has(X86_FEATURE_CPPC)) { + pr_debug("AMD CPPC MSR based functionality is supported\n"); + amd_pstate_driver.adjust_perf = amd_pstate_adjust_perf; + } else if (shared_mem) { + static_call_update(amd_pstate_enable, cppc_enable); + static_call_update(amd_pstate_init_perf, cppc_init_perf); + static_call_update(amd_pstate_update_perf, cppc_update_perf); + } else { + pr_info("This processor supports shared memory solution, you can enable it with amd_pstate.shared_mem=1\n"); + return -ENODEV; + } + + /* enable amd pstate feature */ + ret = amd_pstate_enable(true); + if (ret) { + pr_err("failed to enable amd-pstate with return %d\n", ret); + return ret; + } + + ret = cpufreq_register_driver(&amd_pstate_driver); + if (ret) + pr_err("failed to register amd_pstate_driver with return %d\n", + ret); + + return ret; +} + +static void __exit amd_pstate_exit(void) +{ + cpufreq_unregister_driver(&amd_pstate_driver); + + amd_pstate_enable(false); +} + +module_init(amd_pstate_init); +module_exit(amd_pstate_exit); + +MODULE_AUTHOR("Huang Rui "); +MODULE_DESCRIPTION("AMD Processor P-state Frequency Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 096c3848fa41..b8d95536ee22 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -924,7 +924,7 @@ cpufreq_freq_attr_rw(scaling_max_freq); cpufreq_freq_attr_rw(scaling_governor); cpufreq_freq_attr_rw(scaling_setspeed); -static struct attribute *default_attrs[] = { +static struct attribute *cpufreq_attrs[] = { &cpuinfo_min_freq.attr, &cpuinfo_max_freq.attr, &cpuinfo_transition_latency.attr, @@ -938,6 +938,7 @@ static struct attribute *default_attrs[] = { &scaling_setspeed.attr, NULL }; +ATTRIBUTE_GROUPS(cpufreq); #define to_policy(k) container_of(k, struct cpufreq_policy, kobj) #define to_attr(a) container_of(a, struct freq_attr, attr) @@ -1000,7 +1001,7 @@ static const struct sysfs_ops sysfs_ops = { static struct kobj_type ktype_cpufreq = { .sysfs_ops = &sysfs_ops, - .default_attrs = default_attrs, + .default_groups = cpufreq_groups, .release = cpufreq_sysfs_release, }; @@ -1403,7 +1404,7 @@ static int cpufreq_online(unsigned int cpu) ret = freq_qos_add_request(&policy->constraints, policy->min_freq_req, FREQ_QOS_MIN, - policy->min); + FREQ_QOS_MIN_DEFAULT_VALUE); if (ret < 0) { /* * So we don't call freq_qos_remove_request() for an @@ -1423,7 +1424,7 @@ static int cpufreq_online(unsigned int cpu) ret = freq_qos_add_request(&policy->constraints, policy->max_freq_req, FREQ_QOS_MAX, - policy->max); + FREQ_QOS_MAX_DEFAULT_VALUE); if (ret < 0) { policy->max_freq_req = NULL; goto out_destroy_policy; diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 0879ec3c170c..08515f7e515f 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -257,7 +257,7 @@ gov_attr_rw(ignore_nice_load); gov_attr_rw(down_threshold); gov_attr_rw(freq_step); -static struct attribute *cs_attributes[] = { +static struct attribute *cs_attrs[] = { &sampling_rate.attr, &sampling_down_factor.attr, &up_threshold.attr, @@ -266,6 +266,7 @@ static struct attribute *cs_attributes[] = { &freq_step.attr, NULL }; +ATTRIBUTE_GROUPS(cs); /************************** sysfs end ************************/ @@ -315,7 +316,7 @@ static void cs_start(struct cpufreq_policy *policy) static struct dbs_governor cs_governor = { .gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("conservative"), - .kobj_type = { .default_attrs = cs_attributes }, + .kobj_type = { .default_groups = cs_groups }, .gov_dbs_update = cs_dbs_update, .alloc = cs_alloc, .free = cs_free, diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 3b8f924771b4..6a41ea4729b8 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -328,7 +328,7 @@ gov_attr_rw(sampling_down_factor); gov_attr_rw(ignore_nice_load); gov_attr_rw(powersave_bias); -static struct attribute *od_attributes[] = { +static struct attribute *od_attrs[] = { &sampling_rate.attr, &up_threshold.attr, &sampling_down_factor.attr, @@ -337,6 +337,7 @@ static struct attribute *od_attributes[] = { &io_is_busy.attr, NULL }; +ATTRIBUTE_GROUPS(od); /************************** sysfs end ************************/ @@ -401,7 +402,7 @@ static struct od_ops od_ops = { static struct dbs_governor od_dbs_gov = { .gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("ondemand"), - .kobj_type = { .default_attrs = od_attributes }, + .kobj_type = { .default_groups = od_groups }, .gov_dbs_update = od_dbs_update, .alloc = od_alloc, .free = od_free, diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index dec2a5649ac1..bc7f7e6759bd 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -664,19 +664,29 @@ static int intel_pstate_set_epb(int cpu, s16 pref) * 3 balance_power * 4 power */ + +enum energy_perf_value_index { + EPP_INDEX_DEFAULT = 0, + EPP_INDEX_PERFORMANCE, + EPP_INDEX_BALANCE_PERFORMANCE, + EPP_INDEX_BALANCE_POWERSAVE, + EPP_INDEX_POWERSAVE, +}; + static const char * const energy_perf_strings[] = { - "default", - "performance", - "balance_performance", - "balance_power", - "power", + [EPP_INDEX_DEFAULT] = "default", + [EPP_INDEX_PERFORMANCE] = "performance", + [EPP_INDEX_BALANCE_PERFORMANCE] = "balance_performance", + [EPP_INDEX_BALANCE_POWERSAVE] = "balance_power", + [EPP_INDEX_POWERSAVE] = "power", NULL }; -static const unsigned int epp_values[] = { - HWP_EPP_PERFORMANCE, - HWP_EPP_BALANCE_PERFORMANCE, - HWP_EPP_BALANCE_POWERSAVE, - HWP_EPP_POWERSAVE +static unsigned int epp_values[] = { + [EPP_INDEX_DEFAULT] = 0, /* Unused index */ + [EPP_INDEX_PERFORMANCE] = HWP_EPP_PERFORMANCE, + [EPP_INDEX_BALANCE_PERFORMANCE] = HWP_EPP_BALANCE_PERFORMANCE, + [EPP_INDEX_BALANCE_POWERSAVE] = HWP_EPP_BALANCE_POWERSAVE, + [EPP_INDEX_POWERSAVE] = HWP_EPP_POWERSAVE, }; static int intel_pstate_get_energy_pref_index(struct cpudata *cpu_data, int *raw_epp) @@ -690,14 +700,14 @@ static int intel_pstate_get_energy_pref_index(struct cpudata *cpu_data, int *raw return epp; if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { - if (epp == HWP_EPP_PERFORMANCE) - return 1; - if (epp == HWP_EPP_BALANCE_PERFORMANCE) - return 2; - if (epp == HWP_EPP_BALANCE_POWERSAVE) - return 3; - if (epp == HWP_EPP_POWERSAVE) - return 4; + if (epp == epp_values[EPP_INDEX_PERFORMANCE]) + return EPP_INDEX_PERFORMANCE; + if (epp == epp_values[EPP_INDEX_BALANCE_PERFORMANCE]) + return EPP_INDEX_BALANCE_PERFORMANCE; + if (epp == epp_values[EPP_INDEX_BALANCE_POWERSAVE]) + return EPP_INDEX_BALANCE_POWERSAVE; + if (epp == epp_values[EPP_INDEX_POWERSAVE]) + return EPP_INDEX_POWERSAVE; *raw_epp = epp; return 0; } else if (boot_cpu_has(X86_FEATURE_EPB)) { @@ -757,7 +767,7 @@ static int intel_pstate_set_energy_pref_index(struct cpudata *cpu_data, if (use_raw) epp = raw_epp; else if (epp == -EINVAL) - epp = epp_values[pref_index - 1]; + epp = epp_values[pref_index]; /* * To avoid confusion, refuse to set EPP to any values different @@ -843,7 +853,7 @@ static ssize_t store_energy_performance_preference( * upfront. */ if (!raw) - epp = ret ? epp_values[ret - 1] : cpu->epp_default; + epp = ret ? epp_values[ret] : cpu->epp_default; if (cpu->epp_cached != epp) { int err; @@ -1124,19 +1134,22 @@ static void intel_pstate_update_policies(void) cpufreq_update_policy(cpu); } +static void __intel_pstate_update_max_freq(struct cpudata *cpudata, + struct cpufreq_policy *policy) +{ + policy->cpuinfo.max_freq = global.turbo_disabled_mf ? + cpudata->pstate.max_freq : cpudata->pstate.turbo_freq; + refresh_frequency_limits(policy); +} + static void intel_pstate_update_max_freq(unsigned int cpu) { struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu); - struct cpudata *cpudata; if (!policy) return; - cpudata = all_cpu_data[cpu]; - policy->cpuinfo.max_freq = global.turbo_disabled_mf ? - cpudata->pstate.max_freq : cpudata->pstate.turbo_freq; - - refresh_frequency_limits(policy); + __intel_pstate_update_max_freq(all_cpu_data[cpu], policy); cpufreq_cpu_release(policy); } @@ -1584,8 +1597,15 @@ static void intel_pstate_notify_work(struct work_struct *work) { struct cpudata *cpudata = container_of(to_delayed_work(work), struct cpudata, hwp_notify_work); + struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpudata->cpu); + + if (policy) { + intel_pstate_get_hwp_cap(cpudata); + __intel_pstate_update_max_freq(cpudata, policy); + + cpufreq_cpu_release(policy); + } - cpufreq_update_policy(cpudata->cpu); wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_STATUS, 0); } @@ -1679,10 +1699,18 @@ static void intel_pstate_hwp_enable(struct cpudata *cpudata) wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x00); wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1); - if (cpudata->epp_default == -EINVAL) - cpudata->epp_default = intel_pstate_get_epp(cpudata, 0); intel_pstate_enable_hwp_interrupt(cpudata); + + if (cpudata->epp_default >= 0) + return; + + if (epp_values[EPP_INDEX_BALANCE_PERFORMANCE] == HWP_EPP_BALANCE_PERFORMANCE) { + cpudata->epp_default = intel_pstate_get_epp(cpudata, 0); + } else { + cpudata->epp_default = epp_values[EPP_INDEX_BALANCE_PERFORMANCE]; + intel_pstate_set_epp(cpudata, cpudata->epp_default); + } } static int atom_get_min_pstate(void) @@ -2486,18 +2514,14 @@ static void intel_pstate_update_perf_limits(struct cpudata *cpu, * HWP needs some special consideration, because HWP_REQUEST uses * abstract values to represent performance rather than pure ratios. */ - if (hwp_active) { - intel_pstate_get_hwp_cap(cpu); + if (hwp_active && cpu->pstate.scaling != perf_ctl_scaling) { + int scaling = cpu->pstate.scaling; + int freq; - if (cpu->pstate.scaling != perf_ctl_scaling) { - int scaling = cpu->pstate.scaling; - int freq; - - freq = max_policy_perf * perf_ctl_scaling; - max_policy_perf = DIV_ROUND_UP(freq, scaling); - freq = min_policy_perf * perf_ctl_scaling; - min_policy_perf = DIV_ROUND_UP(freq, scaling); - } + freq = max_policy_perf * perf_ctl_scaling; + max_policy_perf = DIV_ROUND_UP(freq, scaling); + freq = min_policy_perf * perf_ctl_scaling; + min_policy_perf = DIV_ROUND_UP(freq, scaling); } pr_debug("cpu:%d min_policy_perf:%d max_policy_perf:%d\n", @@ -3349,6 +3373,16 @@ static bool intel_pstate_hwp_is_enabled(void) return !!(value & 0x1); } +static const struct x86_cpu_id intel_epp_balance_perf[] = { + /* + * Set EPP value as 102, this is the max suggested EPP + * which can result in one core turbo frequency for + * AlderLake Mobile CPUs. + */ + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, 102), + {} +}; + static int __init intel_pstate_init(void) { static struct cpudata **_all_cpu_data; @@ -3438,6 +3472,13 @@ hwp_cpu_matched: intel_pstate_sysfs_expose_params(); + if (hwp_active) { + const struct x86_cpu_id *id = x86_match_cpu(intel_epp_balance_perf); + + if (id) + epp_values[EPP_INDEX_BALANCE_PERFORMANCE] = id->driver_data; + } + mutex_lock(&intel_pstate_driver_lock); rc = intel_pstate_register_driver(default_driver); mutex_unlock(&intel_pstate_driver_lock); diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c index 8ddbd0c5ce37..0a94c56ddad2 100644 --- a/drivers/cpufreq/mediatek-cpufreq-hw.c +++ b/drivers/cpufreq/mediatek-cpufreq-hw.c @@ -36,6 +36,8 @@ enum { struct mtk_cpufreq_data { struct cpufreq_frequency_table *table; void __iomem *reg_bases[REG_ARRAY_SIZE]; + struct resource *res; + void __iomem *base; int nr_opp; }; @@ -156,6 +158,7 @@ static int mtk_cpu_resources_init(struct platform_device *pdev, { struct mtk_cpufreq_data *data; struct device *dev = &pdev->dev; + struct resource *res; void __iomem *base; int ret, i; int index; @@ -170,9 +173,26 @@ static int mtk_cpu_resources_init(struct platform_device *pdev, if (index < 0) return index; - base = devm_platform_ioremap_resource(pdev, index); - if (IS_ERR(base)) - return PTR_ERR(base); + res = platform_get_resource(pdev, IORESOURCE_MEM, index); + if (!res) { + dev_err(dev, "failed to get mem resource %d\n", index); + return -ENODEV; + } + + if (!request_mem_region(res->start, resource_size(res), res->name)) { + dev_err(dev, "failed to request resource %pR\n", res); + return -EBUSY; + } + + base = ioremap(res->start, resource_size(res)); + if (!base) { + dev_err(dev, "failed to map resource %pR\n", res); + ret = -ENOMEM; + goto release_region; + } + + data->base = base; + data->res = res; for (i = REG_FREQ_LUT_TABLE; i < REG_ARRAY_SIZE; i++) data->reg_bases[i] = base + offsets[i]; @@ -187,6 +207,9 @@ static int mtk_cpu_resources_init(struct platform_device *pdev, policy->driver_data = data; return 0; +release_region: + release_mem_region(res->start, resource_size(res)); + return ret; } static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) @@ -233,9 +256,13 @@ static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) static int mtk_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) { struct mtk_cpufreq_data *data = policy->driver_data; + struct resource *res = data->res; + void __iomem *base = data->base; /* HW should be in paused state now */ writel_relaxed(0x0, data->reg_bases[REG_FREQ_ENABLE]); + iounmap(base); + release_mem_region(res->start, resource_size(res)); return 0; } diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index a2be0df7e174..05f3d7876e44 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -46,6 +46,7 @@ struct qcom_cpufreq_data { */ struct mutex throttle_lock; int throttle_irq; + char irq_name[15]; bool cancel_throttle; struct delayed_work throttle_work; struct cpufreq_policy *policy; @@ -275,10 +276,10 @@ static unsigned int qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data) static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) { - unsigned long max_capacity, capacity, freq_hz, throttled_freq; struct cpufreq_policy *policy = data->policy; int cpu = cpumask_first(policy->cpus); struct device *dev = get_cpu_device(cpu); + unsigned long freq_hz, throttled_freq; struct dev_pm_opp *opp; unsigned int freq; @@ -295,16 +296,8 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) throttled_freq = freq_hz / HZ_PER_KHZ; - /* Update thermal pressure */ - - max_capacity = arch_scale_cpu_capacity(cpu); - capacity = mult_frac(max_capacity, throttled_freq, policy->cpuinfo.max_freq); - - /* Don't pass boost capacity to scheduler */ - if (capacity > max_capacity) - capacity = max_capacity; - - arch_set_thermal_pressure(policy->cpus, max_capacity - capacity); + /* Update thermal pressure (the boost frequencies are accepted) */ + arch_update_thermal_pressure(policy->related_cpus, throttled_freq); /* * In the unlikely case policy is unregistered do not enable @@ -342,9 +335,9 @@ static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data) /* Disable interrupt and enable polling */ disable_irq_nosync(c_data->throttle_irq); - qcom_lmh_dcvs_notify(c_data); + schedule_delayed_work(&c_data->throttle_work, 0); - return 0; + return IRQ_HANDLED; } static const struct qcom_cpufreq_soc_data qcom_soc_data = { @@ -375,16 +368,17 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index) { struct qcom_cpufreq_data *data = policy->driver_data; struct platform_device *pdev = cpufreq_get_driver_data(); - char irq_name[15]; int ret; /* * Look for LMh interrupt. If no interrupt line is specified / * if there is an error, allow cpufreq to be enabled as usual. */ - data->throttle_irq = platform_get_irq(pdev, index); - if (data->throttle_irq <= 0) - return data->throttle_irq == -EPROBE_DEFER ? -EPROBE_DEFER : 0; + data->throttle_irq = platform_get_irq_optional(pdev, index); + if (data->throttle_irq == -ENXIO) + return 0; + if (data->throttle_irq < 0) + return data->throttle_irq; data->cancel_throttle = false; data->policy = policy; @@ -392,14 +386,19 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index) mutex_init(&data->throttle_lock); INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll); - snprintf(irq_name, sizeof(irq_name), "dcvsh-irq-%u", policy->cpu); + snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu); ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq, - IRQF_ONESHOT, irq_name, data); + IRQF_ONESHOT, data->irq_name, data); if (ret) { - dev_err(&pdev->dev, "Error registering %s: %d\n", irq_name, ret); + dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret); return 0; } + ret = irq_set_affinity_hint(data->throttle_irq, policy->cpus); + if (ret) + dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n", + data->irq_name, data->throttle_irq); + return 0; } diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c index 43b1ae8a7789..0bfb8eebd126 100644 --- a/drivers/thermal/cpufreq_cooling.c +++ b/drivers/thermal/cpufreq_cooling.c @@ -462,7 +462,6 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; struct cpumask *cpus; unsigned int frequency; - unsigned long max_capacity, capacity; int ret; /* Request state should be less than max_level */ @@ -479,10 +478,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, if (ret >= 0) { cpufreq_cdev->cpufreq_state = state; cpus = cpufreq_cdev->policy->related_cpus; - max_capacity = arch_scale_cpu_capacity(cpumask_first(cpus)); - capacity = frequency * max_capacity; - capacity /= cpufreq_cdev->policy->cpuinfo.max_freq; - arch_set_thermal_pressure(cpus, max_capacity - capacity); + arch_update_thermal_pressure(cpus, frequency); ret = 0; } diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h index bc159a9b4a73..92b7ea8d8f5e 100644 --- a/include/acpi/cppc_acpi.h +++ b/include/acpi/cppc_acpi.h @@ -138,6 +138,7 @@ extern int cppc_get_desired_perf(int cpunum, u64 *desired_perf); extern int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf); extern int cppc_get_perf_ctrs(int cpu, struct cppc_perf_fb_ctrs *perf_fb_ctrs); extern int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls); +extern int cppc_set_enable(int cpu, bool enable); extern int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps); extern bool acpi_cpc_valid(void); extern int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data); @@ -162,6 +163,10 @@ static inline int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) { return -ENOTSUPP; } +static inline int cppc_set_enable(int cpu, bool enable) +{ + return -ENOTSUPP; +} static inline int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps) { return -ENOTSUPP; diff --git a/include/linux/arch_topology.h b/include/linux/arch_topology.h index b97cea83b25e..cce6136b300a 100644 --- a/include/linux/arch_topology.h +++ b/include/linux/arch_topology.h @@ -56,8 +56,8 @@ static inline unsigned long topology_get_thermal_pressure(int cpu) return per_cpu(thermal_pressure, cpu); } -void topology_set_thermal_pressure(const struct cpumask *cpus, - unsigned long th_pressure); +void topology_update_thermal_pressure(const struct cpumask *cpus, + unsigned long capped_freq); struct cpu_topology { int thread_id; diff --git a/include/linux/sched/topology.h b/include/linux/sched/topology.h index c07bfa2d80f2..8054641c0a7b 100644 --- a/include/linux/sched/topology.h +++ b/include/linux/sched/topology.h @@ -266,10 +266,10 @@ unsigned long arch_scale_thermal_pressure(int cpu) } #endif -#ifndef arch_set_thermal_pressure +#ifndef arch_update_thermal_pressure static __always_inline -void arch_set_thermal_pressure(const struct cpumask *cpus, - unsigned long th_pressure) +void arch_update_thermal_pressure(const struct cpumask *cpus, + unsigned long capped_frequency) { } #endif diff --git a/init/Kconfig b/init/Kconfig index 4b7bac10c72d..69da9c454f73 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -550,7 +550,7 @@ config SCHED_THERMAL_PRESSURE i.e. put less load on throttled CPUs than on non/less throttled ones. This requires the architecture to implement - arch_set_thermal_pressure() and arch_scale_thermal_pressure(). + arch_update_thermal_pressure() and arch_scale_thermal_pressure(). config BSD_PROCESS_ACCT bool "BSD Process Accounting"