microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

vt8623fb: new framebuffer driver for VIA VT8623 

This patch adds fbdev driver for graphics core in VIA VT8623

[adaplas@gmail.com: build fixes]
Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Ondrej Zajicek 2007-05-09 02:35:31 -07:00 коммит произвёл Linus Torvalds
Родитель c3c117f06e
Коммит 558b7bd86c
4 изменённых файлов: 1005 добавлений и 0 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

64
Documentation/fb/vt8623fb.txt Normal file
Просмотреть файл

@ -0,0 +1,64 @@
vt8623fb - fbdev driver for graphics core in VIA VT8623 chipset
===============================================================
Supported Hardware
==================
VIA VT8623 [CLE266] chipset and its graphics core
(known as CastleRock or Unichrome)
I tested vt8623fb on VIA EPIA ML-6000
Supported Features
==================
* 4 bpp pseudocolor modes (with 18bit palette, two variants)
* 8 bpp pseudocolor mode (with 18bit palette)
* 16 bpp truecolor mode (RGB 565)
* 32 bpp truecolor mode (RGB 888)
* text mode (activated by bpp = 0)
* doublescan mode variant (not available in text mode)
* panning in both directions
* suspend/resume support
* DPMS support
Text mode is supported even in higher resolutions, but there is limitation to
lower pixclocks (maximum about 100 MHz). This limitation is not enforced by
driver. Text mode supports 8bit wide fonts only (hardware limitation) and
16bit tall fonts (driver limitation).
There are two 4 bpp modes. First mode (selected if nonstd == 0) is mode with
packed pixels, high nibble first. Second mode (selected if nonstd == 1) is mode
with interleaved planes (1 byte interleave), MSB first. Both modes support
8bit wide fonts only (driver limitation).
Suspend/resume works on systems that initialize video card during resume and
if device is active (for example used by fbcon).
Missing Features
================
(alias TODO list)
* secondary (not initialized by BIOS) device support
* MMIO support
* interlaced mode variant
* support for fontwidths != 8 in 4 bpp modes
* support for fontheight != 16 in text mode
* hardware cursor
* video overlay support
* vsync synchronization
* acceleration support (8514-like 2D, busmaster transfers)
Known bugs
==========
* cursor disable in text mode doesn't work
--
Ondrej Zajicek <santiago@crfreenet.org>

14
drivers/video/Kconfig
Просмотреть файл

@ -1348,6 +1348,20 @@ config FB_VOODOO1
Please read the <file:Documentation/fb/README-sstfb.txt> for supported
options and other important info support.
config FB_VT8623
tristate "VIA VT8623 support"
depends on FB && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_TILEBLITTING
select FB_SVGALIB
select VGASTATE
select FONT_8x16 if FRAMEBUFFER_CONSOLE
---help---
Driver for CastleRock integrated graphics core in the
VIA VT8623 [Apollo CLE266] chipset.
config FB_CYBLA
tristate "Cyberblade/i1 support"
depends on FB && PCI && X86_32 && !64BIT

1
drivers/video/Makefile
Просмотреть файл

@ -54,6 +54,7 @@ obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
obj-$(CONFIG_FB_CT65550) += chipsfb.o
obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_FM2) += fm2fb.o
obj-$(CONFIG_FB_VT8623) += vt8623fb.o
obj-$(CONFIG_FB_CYBLA) += cyblafb.o
obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
obj-$(CONFIG_FB_LE80578) += vermilion/

926
drivers/video/vt8623fb.c Normal file
Просмотреть файл

@ -0,0 +1,926 @@
/*
* linux/drivers/video/vt8623fb.c - fbdev driver for
* integrated graphic core in VIA VT8623 [CLE266] chipset
*
* Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
* Code is based on s3fb, some parts are from David Boucher's viafb
* (http://davesdomain.org.uk/viafb/)
*/
#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/svga.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/console.h> /* Why should fb driver call console functions? because acquire_console_sem() */
#include <video/vga.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
struct vt8623fb_info {
char __iomem *mmio_base;
int mtrr_reg;
struct vgastate state;
struct mutex open_lock;
unsigned int ref_count;
u32 pseudo_palette[16];
};
/* ------------------------------------------------------------------------- */
static const struct svga_fb_format vt8623fb_formats[] = {
{ 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP8, FB_VISUAL_PSEUDOCOLOR, 16, 16},
{ 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 16, 16},
{ 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 1,
FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 16, 16},
{ 8, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 8},
/* {16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 4, 4}, */
{16, {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 4, 4},
{32, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 2},
SVGA_FORMAT_END
};
static const struct svga_pll vt8623_pll = {2, 127, 2, 7, 0, 3,
60000, 300000, 14318};
/* CRT timing register sets */
struct vga_regset vt8623_h_total_regs[] = {{0x00, 0, 7}, {0x36, 3, 3}, VGA_REGSET_END};
struct vga_regset vt8623_h_display_regs[] = {{0x01, 0, 7}, VGA_REGSET_END};
struct vga_regset vt8623_h_blank_start_regs[] = {{0x02, 0, 7}, VGA_REGSET_END};
struct vga_regset vt8623_h_blank_end_regs[] = {{0x03, 0, 4}, {0x05, 7, 7}, {0x33, 5, 5}, VGA_REGSET_END};
struct vga_regset vt8623_h_sync_start_regs[] = {{0x04, 0, 7}, {0x33, 4, 4}, VGA_REGSET_END};
struct vga_regset vt8623_h_sync_end_regs[] = {{0x05, 0, 4}, VGA_REGSET_END};
struct vga_regset vt8623_v_total_regs[] = {{0x06, 0, 7}, {0x07, 0, 0}, {0x07, 5, 5}, {0x35, 0, 0}, VGA_REGSET_END};
struct vga_regset vt8623_v_display_regs[] = {{0x12, 0, 7}, {0x07, 1, 1}, {0x07, 6, 6}, {0x35, 2, 2}, VGA_REGSET_END};
struct vga_regset vt8623_v_blank_start_regs[] = {{0x15, 0, 7}, {0x07, 3, 3}, {0x09, 5, 5}, {0x35, 3, 3}, VGA_REGSET_END};
struct vga_regset vt8623_v_blank_end_regs[] = {{0x16, 0, 7}, VGA_REGSET_END};
struct vga_regset vt8623_v_sync_start_regs[] = {{0x10, 0, 7}, {0x07, 2, 2}, {0x07, 7, 7}, {0x35, 1, 1}, VGA_REGSET_END};
struct vga_regset vt8623_v_sync_end_regs[] = {{0x11, 0, 3}, VGA_REGSET_END};
struct vga_regset vt8623_offset_regs[] = {{0x13, 0, 7}, {0x35, 5, 7}, VGA_REGSET_END};
struct vga_regset vt8623_line_compare_regs[] = {{0x18, 0, 7}, {0x07, 4, 4}, {0x09, 6, 6}, {0x33, 0, 2}, {0x35, 4, 4}, VGA_REGSET_END};
struct vga_regset vt8623_fetch_count_regs[] = {{0x1C, 0, 7}, {0x1D, 0, 1}, VGA_REGSET_END};
struct vga_regset vt8623_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x34, 0, 7}, {0x48, 0, 1}, VGA_REGSET_END};
struct svga_timing_regs vt8623_timing_regs = {
vt8623_h_total_regs, vt8623_h_display_regs, vt8623_h_blank_start_regs,
vt8623_h_blank_end_regs, vt8623_h_sync_start_regs, vt8623_h_sync_end_regs,
vt8623_v_total_regs, vt8623_v_display_regs, vt8623_v_blank_start_regs,
vt8623_v_blank_end_regs, vt8623_v_sync_start_regs, vt8623_v_sync_end_regs,
};
/* ------------------------------------------------------------------------- */
/* Module parameters */
static char *mode = "640x480-8@60";
#ifdef CONFIG_MTRR
static int mtrr = 1;
#endif
MODULE_AUTHOR("(c) 2006 Ondrej Zajicek <santiago@crfreenet.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("fbdev driver for integrated graphics core in VIA VT8623 [CLE266]");
module_param(mode, charp, 0644);
MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc)");
#ifdef CONFIG_MTRR
module_param(mtrr, int, 0444);
MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
#endif
/* ------------------------------------------------------------------------- */
static struct fb_tile_ops vt8623fb_tile_ops = {
.fb_settile = svga_settile,
.fb_tilecopy = svga_tilecopy,
.fb_tilefill = svga_tilefill,
.fb_tileblit = svga_tileblit,
.fb_tilecursor = svga_tilecursor,
.fb_get_tilemax = svga_get_tilemax,
};
/* ------------------------------------------------------------------------- */
/* image data is MSB-first, fb structure is MSB-first too */
static inline u32 expand_color(u32 c)
{
return ((c & 1) | ((c & 2) << 7) | ((c & 4) << 14) | ((c & 8) << 21)) * 0xFF;
}
/* vt8623fb_iplan_imageblit silently assumes that almost everything is 8-pixel aligned */
static void vt8623fb_iplan_imageblit(struct fb_info *info, const struct fb_image *image)
{
u32 fg = expand_color(image->fg_color);
u32 bg = expand_color(image->bg_color);
const u8 *src1, *src;
u8 __iomem *dst1;
u32 __iomem *dst;
u32 val;
int x, y;
src1 = image->data;
dst1 = info->screen_base + (image->dy * info->fix.line_length)
+ ((image->dx / 8) * 4);
for (y = 0; y < image->height; y++) {
src = src1;
dst = (u32 __iomem *) dst1;
for (x = 0; x < image->width; x += 8) {
val = *(src++) * 0x01010101;
val = (val & fg) | (~val & bg);
fb_writel(val, dst++);
}
src1 += image->width / 8;
dst1 += info->fix.line_length;
}
}
/* vt8623fb_iplan_fillrect silently assumes that almost everything is 8-pixel aligned */
static void vt8623fb_iplan_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
u32 fg = expand_color(rect->color);
u8 __iomem *dst1;
u32 __iomem *dst;
int x, y;
dst1 = info->screen_base + (rect->dy * info->fix.line_length)
+ ((rect->dx / 8) * 4);
for (y = 0; y < rect->height; y++) {
dst = (u32 __iomem *) dst1;
for (x = 0; x < rect->width; x += 8) {
fb_writel(fg, dst++);
}
dst1 += info->fix.line_length;
}
}
/* image data is MSB-first, fb structure is high-nibble-in-low-byte-first */
static inline u32 expand_pixel(u32 c)
{
return (((c & 1) << 24) | ((c & 2) << 27) | ((c & 4) << 14) | ((c & 8) << 17) |
((c & 16) << 4) | ((c & 32) << 7) | ((c & 64) >> 6) | ((c & 128) >> 3)) * 0xF;
}
/* vt8623fb_cfb4_imageblit silently assumes that almost everything is 8-pixel aligned */
static void vt8623fb_cfb4_imageblit(struct fb_info *info, const struct fb_image *image)
{
u32 fg = image->fg_color * 0x11111111;
u32 bg = image->bg_color * 0x11111111;
const u8 *src1, *src;
u8 __iomem *dst1;
u32 __iomem *dst;
u32 val;
int x, y;
src1 = image->data;
dst1 = info->screen_base + (image->dy * info->fix.line_length)
+ ((image->dx / 8) * 4);
for (y = 0; y < image->height; y++) {
src = src1;
dst = (u32 __iomem *) dst1;
for (x = 0; x < image->width; x += 8) {
val = expand_pixel(*(src++));
val = (val & fg) | (~val & bg);
fb_writel(val, dst++);
}
src1 += image->width / 8;
dst1 += info->fix.line_length;
}
}
static void vt8623fb_imageblit(struct fb_info *info, const struct fb_image *image)
{
if ((info->var.bits_per_pixel == 4) && (image->depth == 1)
&& ((image->width % 8) == 0) && ((image->dx % 8) == 0)) {
if (info->fix.type == FB_TYPE_INTERLEAVED_PLANES)
vt8623fb_iplan_imageblit(info, image);
else
vt8623fb_cfb4_imageblit(info, image);
} else
cfb_imageblit(info, image);
}
static void vt8623fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
if ((info->var.bits_per_pixel == 4)
&& ((rect->width % 8) == 0) && ((rect->dx % 8) == 0)
&& (info->fix.type == FB_TYPE_INTERLEAVED_PLANES))
vt8623fb_iplan_fillrect(info, rect);
else
cfb_fillrect(info, rect);
}
/* ------------------------------------------------------------------------- */
static void vt8623_set_pixclock(struct fb_info *info, u32 pixclock)
{
u16 m, n, r;
u8 regval;
int rv;
rv = svga_compute_pll(&vt8623_pll, 1000000000 / pixclock, &m, &n, &r, info->node);
if (rv < 0) {
printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node);
return;
}
/* Set VGA misc register */
regval = vga_r(NULL, VGA_MIS_R);
vga_w(NULL, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD);
/* Set clock registers */
vga_wseq(NULL, 0x46, (n | (r << 6)));
vga_wseq(NULL, 0x47, m);
udelay(1000);
/* PLL reset */
svga_wseq_mask(0x40, 0x02, 0x02);
svga_wseq_mask(0x40, 0x00, 0x02);
}
static int vt8623fb_open(struct fb_info *info, int user)
{
struct vt8623fb_info *par = info->par;
mutex_lock(&(par->open_lock));
if (par->ref_count == 0) {
memset(&(par->state), 0, sizeof(struct vgastate));
par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | VGA_SAVE_CMAP;
par->state.num_crtc = 0xA2;
par->state.num_seq = 0x50;
save_vga(&(par->state));
}
par->ref_count++;
mutex_unlock(&(par->open_lock));
return 0;
}
static int vt8623fb_release(struct fb_info *info, int user)
{
struct vt8623fb_info *par = info->par;
mutex_lock(&(par->open_lock));
if (par->ref_count == 0) {
mutex_unlock(&(par->open_lock));
return -EINVAL;
}
if (par->ref_count == 1)
restore_vga(&(par->state));
par->ref_count--;
mutex_unlock(&(par->open_lock));
return 0;
}
static int vt8623fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
int rv, mem, step;
/* Find appropriate format */
rv = svga_match_format (vt8623fb_formats, var, NULL);
if (rv < 0)
{
printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node);
return rv;
}
/* Do not allow to have real resoulution larger than virtual */
if (var->xres > var->xres_virtual)
var->xres_virtual = var->xres;
if (var->yres > var->yres_virtual)
var->yres_virtual = var->yres;
/* Round up xres_virtual to have proper alignment of lines */
step = vt8623fb_formats[rv].xresstep - 1;
var->xres_virtual = (var->xres_virtual+step) & ~step;
/* Check whether have enough memory */
mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
if (mem > info->screen_size)
{
printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", info->node, mem >> 10, (unsigned int) (info->screen_size >> 10));
return -EINVAL;
}
/* Text mode is limited to 256 kB of memory */
if ((var->bits_per_pixel == 0) && (mem > (256*1024)))
{
printk(KERN_ERR "fb%d: text framebuffer size too large (%d kB requested, 256 kB possible)\n", info->node, mem >> 10);
return -EINVAL;
}
rv = svga_check_timings (&vt8623_timing_regs, var, info->node);
if (rv < 0)
{
printk(KERN_ERR "fb%d: invalid timings requested\n", info->node);
return rv;
}
/* Interlaced mode not supported */
if (var->vmode & FB_VMODE_INTERLACED)
return -EINVAL;
return 0;
}
static int vt8623fb_set_par(struct fb_info *info)
{
u32 mode, offset_value, fetch_value, screen_size;
u32 bpp = info->var.bits_per_pixel;
if (bpp != 0) {
info->fix.ypanstep = 1;
info->fix.line_length = (info->var.xres_virtual * bpp) / 8;
info->flags &= ~FBINFO_MISC_TILEBLITTING;
info->tileops = NULL;
/* in 4bpp supports 8p wide tiles only, any tiles otherwise */
info->pixmap.blit_x = (bpp == 4) ? (1 << (8 - 1)) : (~(u32)0);
info->pixmap.blit_y = ~(u32)0;
offset_value = (info->var.xres_virtual * bpp) / 64;
fetch_value = ((info->var.xres * bpp) / 128) + 4;
if (bpp == 4)
fetch_value = (info->var.xres / 8) + 8; /* + 0 is OK */
screen_size = info->var.yres_virtual * info->fix.line_length;
} else {
info->fix.ypanstep = 16;
info->fix.line_length = 0;
info->flags |= FBINFO_MISC_TILEBLITTING;
info->tileops = &vt8623fb_tile_ops;
/* supports 8x16 tiles only */
info->pixmap.blit_x = 1 << (8 - 1);
info->pixmap.blit_y = 1 << (16 - 1);
offset_value = info->var.xres_virtual / 16;
fetch_value = (info->var.xres / 8) + 8;
screen_size = (info->var.xres_virtual * info->var.yres_virtual) / 64;
}
info->var.xoffset = 0;
info->var.yoffset = 0;
info->var.activate = FB_ACTIVATE_NOW;
/* Unlock registers */
svga_wseq_mask(0x10, 0x01, 0x01);
svga_wcrt_mask(0x11, 0x00, 0x80);
svga_wcrt_mask(0x47, 0x00, 0x01);
/* Device, screen and sync off */
svga_wseq_mask(0x01, 0x20, 0x20);
svga_wcrt_mask(0x36, 0x30, 0x30);
svga_wcrt_mask(0x17, 0x00, 0x80);
/* Set default values */
svga_set_default_gfx_regs();
svga_set_default_atc_regs();
svga_set_default_seq_regs();
svga_set_default_crt_regs();
svga_wcrt_multi(vt8623_line_compare_regs, 0xFFFFFFFF);
svga_wcrt_multi(vt8623_start_address_regs, 0);
svga_wcrt_multi(vt8623_offset_regs, offset_value);
svga_wseq_multi(vt8623_fetch_count_regs, fetch_value);
if (info->var.vmode & FB_VMODE_DOUBLE)
svga_wcrt_mask(0x09, 0x80, 0x80);
else
svga_wcrt_mask(0x09, 0x00, 0x80);
svga_wseq_mask(0x1E, 0xF0, 0xF0); // DI/DVP bus
svga_wseq_mask(0x2A, 0x0F, 0x0F); // DI/DVP bus
svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read treshold
vga_wseq(NULL, 0x17, 0x1F); // FIFO depth
vga_wseq(NULL, 0x18, 0x4E);
svga_wseq_mask(0x1A, 0x08, 0x08); // enable MMIO ?
vga_wcrt(NULL, 0x32, 0x00);
vga_wcrt(NULL, 0x34, 0x00);
vga_wcrt(NULL, 0x6A, 0x80);
vga_wcrt(NULL, 0x6A, 0xC0);
vga_wgfx(NULL, 0x20, 0x00);
vga_wgfx(NULL, 0x21, 0x00);
vga_wgfx(NULL, 0x22, 0x00);
/* Set SR15 according to number of bits per pixel */
mode = svga_match_format(vt8623fb_formats, &(info->var), &(info->fix));
switch (mode) {
case 0:
pr_debug("fb%d: text mode\n", info->node);
svga_set_textmode_vga_regs();
svga_wseq_mask(0x15, 0x00, 0xFE);
svga_wcrt_mask(0x11, 0x60, 0x70);
break;
case 1:
pr_debug("fb%d: 4 bit pseudocolor\n", info->node);
vga_wgfx(NULL, VGA_GFX_MODE, 0x40);
svga_wseq_mask(0x15, 0x20, 0xFE);
svga_wcrt_mask(0x11, 0x00, 0x70);
break;
case 2:
pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node);
svga_wseq_mask(0x15, 0x00, 0xFE);
svga_wcrt_mask(0x11, 0x00, 0x70);
break;
case 3:
pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
svga_wseq_mask(0x15, 0x22, 0xFE);
break;
case 4:
pr_debug("fb%d: 5/6/5 truecolor\n", info->node);
svga_wseq_mask(0x15, 0xB6, 0xFE);
break;
case 5:
pr_debug("fb%d: 8/8/8 truecolor\n", info->node);
svga_wseq_mask(0x15, 0xAE, 0xFE);
break;
default:
printk(KERN_ERR "vt8623fb: unsupported mode - bug\n");
return (-EINVAL);
}
vt8623_set_pixclock(info, info->var.pixclock);
svga_set_timings(&vt8623_timing_regs, &(info->var), 1, 1,
(info->var.vmode & FB_VMODE_DOUBLE) ? 2 : 1, 1,
1, info->node);
memset_io(info->screen_base, 0x00, screen_size);
/* Device and screen back on */
svga_wcrt_mask(0x17, 0x80, 0x80);
svga_wcrt_mask(0x36, 0x00, 0x30);
svga_wseq_mask(0x01, 0x00, 0x20);
return 0;
}
static int vt8623fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *fb)
{
switch (fb->var.bits_per_pixel) {
case 0:
case 4:
if (regno >= 16)
return -EINVAL;
outb(0x0F, VGA_PEL_MSK);
outb(regno, VGA_PEL_IW);
outb(red >> 10, VGA_PEL_D);
outb(green >> 10, VGA_PEL_D);
outb(blue >> 10, VGA_PEL_D);
break;
case 8:
if (regno >= 256)
return -EINVAL;
outb(0xFF, VGA_PEL_MSK);
outb(regno, VGA_PEL_IW);
outb(red >> 10, VGA_PEL_D);
outb(green >> 10, VGA_PEL_D);
outb(blue >> 10, VGA_PEL_D);
break;
case 16:
if (regno >= 16)
return 0;
if (fb->var.green.length == 5)
((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) |
((green & 0xF800) >> 6) | ((blue & 0xF800) >> 11);
else if (fb->var.green.length == 6)
((u32*)fb->pseudo_palette)[regno] = (red & 0xF800) |
((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
else
return -EINVAL;
break;
case 24:
case 32:
if (regno >= 16)
return 0;
/* ((transp & 0xFF00) << 16) */
((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) |
(green & 0xFF00) | ((blue & 0xFF00) >> 8);
break;
default:
return -EINVAL;
}
return 0;
}
static int vt8623fb_blank(int blank_mode, struct fb_info *info)
{
switch (blank_mode) {
case FB_BLANK_UNBLANK:
pr_debug("fb%d: unblank\n", info->node);
svga_wcrt_mask(0x36, 0x00, 0x30);
svga_wseq_mask(0x01, 0x00, 0x20);
break;
case FB_BLANK_NORMAL:
pr_debug("fb%d: blank\n", info->node);
svga_wcrt_mask(0x36, 0x00, 0x30);
svga_wseq_mask(0x01, 0x20, 0x20);
break;
case FB_BLANK_HSYNC_SUSPEND:
pr_debug("fb%d: DPMS standby (hsync off)\n", info->node);
svga_wcrt_mask(0x36, 0x10, 0x30);
svga_wseq_mask(0x01, 0x20, 0x20);
break;
case FB_BLANK_VSYNC_SUSPEND:
pr_debug("fb%d: DPMS suspend (vsync off)\n", info->node);
svga_wcrt_mask(0x36, 0x20, 0x30);
svga_wseq_mask(0x01, 0x20, 0x20);
break;
case FB_BLANK_POWERDOWN:
pr_debug("fb%d: DPMS off (no sync)\n", info->node);
svga_wcrt_mask(0x36, 0x30, 0x30);
svga_wseq_mask(0x01, 0x20, 0x20);
break;
}
return 0;
}
static int vt8623fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
{
unsigned int offset;
/* Calculate the offset */
if (var->bits_per_pixel == 0) {
offset = (var->yoffset / 16) * var->xres_virtual + var->xoffset;
offset = offset >> 3;
} else {
offset = (var->yoffset * info->fix.line_length) +
(var->xoffset * var->bits_per_pixel / 8);
offset = offset >> ((var->bits_per_pixel == 4) ? 2 : 1);
}
/* Set the offset */
svga_wcrt_multi(vt8623_start_address_regs, offset);
return 0;
}
/* ------------------------------------------------------------------------- */
/* Frame buffer operations */
static struct fb_ops vt8623fb_ops = {
.owner = THIS_MODULE,
.fb_open = vt8623fb_open,
.fb_release = vt8623fb_release,
.fb_check_var = vt8623fb_check_var,
.fb_set_par = vt8623fb_set_par,
.fb_setcolreg = vt8623fb_setcolreg,
.fb_blank = vt8623fb_blank,
.fb_pan_display = vt8623fb_pan_display,
.fb_fillrect = vt8623fb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = vt8623fb_imageblit,
};
/* PCI probe */
static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct fb_info *info;
struct vt8623fb_info *par;
unsigned int memsize1, memsize2;
int rc;
/* Ignore secondary VGA device because there is no VGA arbitration */
if (! svga_primary_device(dev)) {
dev_info(&(dev->dev), "ignoring secondary device\n");
return -ENODEV;
}
/* Allocate and fill driver data structure */
info = framebuffer_alloc(sizeof(struct vt8623fb_info), NULL);
if (! info) {
dev_err(&(dev->dev), "cannot allocate memory\n");
return -ENOMEM;
}
par = info->par;
mutex_init(&par->open_lock);
info->flags = FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN;
info->fbops = &vt8623fb_ops;
/* Prepare PCI device */
rc = pci_enable_device(dev);
if (rc < 0) {
dev_err(&(dev->dev), "cannot enable PCI device\n");
goto err_enable_device;
}
rc = pci_request_regions(dev, "vt8623fb");
if (rc < 0) {
dev_err(&(dev->dev), "cannot reserve framebuffer region\n");
goto err_request_regions;
}
info->fix.smem_start = pci_resource_start(dev, 0);
info->fix.smem_len = pci_resource_len(dev, 0);
info->fix.mmio_start = pci_resource_start(dev, 1);
info->fix.mmio_len = pci_resource_len(dev, 1);
/* Map physical IO memory address into kernel space */
info->screen_base = pci_iomap(dev, 0, 0);
if (! info->screen_base) {
rc = -ENOMEM;
dev_err(&(dev->dev), "iomap for framebuffer failed\n");
goto err_iomap_1;
}
par->mmio_base = pci_iomap(dev, 1, 0);
if (! par->mmio_base) {
rc = -ENOMEM;
dev_err(&(dev->dev), "iomap for MMIO failed\n");
goto err_iomap_2;
}
/* Find how many physical memory there is on card */
memsize1 = (vga_rseq(NULL, 0x34) + 1) >> 1;
memsize2 = vga_rseq(NULL, 0x39) << 2;
if ((16 <= memsize1) && (memsize1 <= 64) && (memsize1 == memsize2))
info->screen_size = memsize1 << 20;
else {
dev_err(&(dev->dev), "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
info->screen_size = 16 << 20;
}
info->fix.smem_len = info->screen_size;
strcpy(info->fix.id, "VIA VT8623");
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
info->fix.ypanstep = 0;
info->fix.accel = FB_ACCEL_NONE;
info->pseudo_palette = (void*)par->pseudo_palette;
/* Prepare startup mode */
rc = fb_find_mode(&(info->var), info, mode, NULL, 0, NULL, 8);
if (! ((rc == 1) || (rc == 2))) {
rc = -EINVAL;
dev_err(&(dev->dev), "mode %s not found\n", mode);
goto err_find_mode;
}
rc = fb_alloc_cmap(&info->cmap, 256, 0);
if (rc < 0) {
dev_err(&(dev->dev), "cannot allocate colormap\n");
goto err_alloc_cmap;
}
rc = register_framebuffer(info);
if (rc < 0) {
dev_err(&(dev->dev), "cannot register framebugger\n");
goto err_reg_fb;
}
printk(KERN_INFO "fb%d: %s on %s, %d MB RAM\n", info->node, info->fix.id,
pci_name(dev), info->fix.smem_len >> 20);
/* Record a reference to the driver data */
pci_set_drvdata(dev, info);
#ifdef CONFIG_MTRR
if (mtrr) {
par->mtrr_reg = -1;
par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
}
#endif
return 0;
/* Error handling */
err_reg_fb:
fb_dealloc_cmap(&info->cmap);
err_alloc_cmap:
err_find_mode:
pci_iounmap(dev, par->mmio_base);
err_iomap_2:
pci_iounmap(dev, info->screen_base);
err_iomap_1:
pci_release_regions(dev);
err_request_regions:
/* pci_disable_device(dev); */
err_enable_device:
framebuffer_release(info);
return rc;
}
/* PCI remove */
static void __devexit vt8623_pci_remove(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
struct vt8623fb_info *par = info->par;
if (info) {
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
mtrr_del(par->mtrr_reg, 0, 0);
par->mtrr_reg = -1;
}
#endif
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
pci_iounmap(dev, info->screen_base);
pci_iounmap(dev, par->mmio_base);
pci_release_regions(dev);
/* pci_disable_device(dev); */
pci_set_drvdata(dev, NULL);
framebuffer_release(info);
}
}
#ifdef CONFIG_PM
/* PCI suspend */
static int vt8623_pci_suspend(struct pci_dev* dev, pm_message_t state)
{
struct fb_info *info = pci_get_drvdata(dev);
struct vt8623fb_info *par = info->par;
dev_info(&(dev->dev), "suspend\n");
acquire_console_sem();
mutex_lock(&(par->open_lock));
if ((state.event == PM_EVENT_FREEZE) || (par->ref_count == 0)) {
mutex_unlock(&(par->open_lock));
release_console_sem();
return 0;
}
fb_set_suspend(info, 1);
pci_save_state(dev);
pci_disable_device(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
mutex_unlock(&(par->open_lock));
release_console_sem();
return 0;
}
/* PCI resume */
static int vt8623_pci_resume(struct pci_dev* dev)
{
struct fb_info *info = pci_get_drvdata(dev);
struct vt8623fb_info *par = info->par;
dev_info(&(dev->dev), "resume\n");
acquire_console_sem();
mutex_lock(&(par->open_lock));
if (par->ref_count == 0) {
mutex_unlock(&(par->open_lock));
release_console_sem();
return 0;
}
pci_set_power_state(dev, PCI_D0);
pci_restore_state(dev);
if (pci_enable_device(dev))
goto fail;
pci_set_master(dev);
vt8623fb_set_par(info);
fb_set_suspend(info, 0);
mutex_unlock(&(par->open_lock));
fail:
release_console_sem();
return 0;
}
#else
#define vt8623_pci_suspend NULL
#define vt8623_pci_resume NULL
#endif /* CONFIG_PM */
/* List of boards that we are trying to support */
static struct pci_device_id vt8623_devices[] __devinitdata = {
{PCI_DEVICE(PCI_VENDOR_ID_VIA, 0x3122)},
{0, 0, 0, 0, 0, 0, 0}
};
MODULE_DEVICE_TABLE(pci, vt8623_devices);
static struct pci_driver vt8623fb_pci_driver = {
.name = "vt8623fb",
.id_table = vt8623_devices,
.probe = vt8623_pci_probe,
.remove = __devexit_p(vt8623_pci_remove),
.suspend = vt8623_pci_suspend,
.resume = vt8623_pci_resume,
};
/* Cleanup */
static void __exit vt8623fb_cleanup(void)
{
pr_debug("vt8623fb: cleaning up\n");
pci_unregister_driver(&vt8623fb_pci_driver);
}
/* Driver Initialisation */
int __init vt8623fb_init(void)
{
#ifndef MODULE
char *option = NULL;
if (fb_get_options("vt8623fb", &option))
return -ENODEV;
if (option && *option)
mode = option;
#endif
pr_debug("vt8623fb: initializing\n");
return pci_register_driver(&vt8623fb_pci_driver);
}
/* ------------------------------------------------------------------------- */
/* Modularization */
module_init(vt8623fb_init);
module_exit(vt8623fb_cleanup);