powerpc/pci: Add config option for using all 256 PCI buses

By default on PPC32 PCI bus numbers are unique across all PCI domains.
So a system could have only 256 PCI buses independently of available PCI
domains.

This is due to filling DT property pci-OF-bus-map which does not support
a multi-domain setup.

On all powerpc platforms except chrp and powermac there is no DT
property pci-OF-bus-map anymore and therefore it is possible on
non-chrp/powermac platforms to avoid this limitation of maximum number
of 256 PCI buses in a system even on multi-domain setup.

But avoiding this limitation would mean that all PCI and PCIe devices
would be present on completely different BDF addresses as every PCI
domain starts numbering PCI bueses from zero (instead of the last bus
number of previous enumerated PCI domain). Such change could break
existing software which expects fixed PCI bus numbers.

So add a new config option CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT which
enables this change. By default it is disabled. It causes the initial
value of hose->first_busno to be zero.

Signed-off-by: Pali Rohár <pali@kernel.org>
[mpe: Minor change log wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706104308.5390-6-pali@kernel.org
This commit is contained in:
Pali Rohár 2022-07-06 12:43:08 +02:00 коммит произвёл Michael Ellerman
Родитель 7f102d6198
Коммит 5663568130
2 изменённых файлов: 17 добавлений и 0 удалений

Просмотреть файл

@ -375,6 +375,17 @@ config PPC_DCR
depends on PPC_DCR_NATIVE || PPC_DCR_MMIO depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
default y default y
config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
depends on PPC32
depends on !PPC_PMAC && !PPC_CHRP
bool "Assign PCI bus numbers from zero individually for each PCI domain"
help
By default on PPC32 were PCI bus numbers unique across all PCI domains.
So system could have only 256 PCI buses independently of available
PCI domains. When this option is enabled then PCI bus numbers are
PCI domain dependent and each PCI controller on own domain can have
256 PCI buses, like it is on other Linux architectures.
config PPC_OF_PLATFORM_PCI config PPC_OF_PLATFORM_PCI
bool bool
depends on PCI depends on PCI

Просмотреть файл

@ -239,7 +239,9 @@ void pcibios_setup_phb_io_space(struct pci_controller *hose)
static int __init pcibios_init(void) static int __init pcibios_init(void)
{ {
struct pci_controller *hose, *tmp; struct pci_controller *hose, *tmp;
#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
int next_busno = 0; int next_busno = 0;
#endif
printk(KERN_INFO "PCI: Probing PCI hardware\n"); printk(KERN_INFO "PCI: Probing PCI hardware\n");
@ -248,13 +250,17 @@ static int __init pcibios_init(void)
/* Scan all of the recorded PCI controllers. */ /* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
if (pci_assign_all_buses) if (pci_assign_all_buses)
hose->first_busno = next_busno; hose->first_busno = next_busno;
#endif
hose->last_busno = 0xff; hose->last_busno = 0xff;
pcibios_scan_phb(hose); pcibios_scan_phb(hose);
pci_bus_add_devices(hose->bus); pci_bus_add_devices(hose->bus);
#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
if (pci_assign_all_buses || next_busno <= hose->last_busno) if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset; next_busno = hose->last_busno + pcibios_assign_bus_offset;
#endif
} }
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP) #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP)