bus: ti-sysc: Handle module quirks based dts configuration
Let's configure few module quirks via device tree using the properties for "ti,no-idle-on-init", "ti,no-reset-on-init" and "ti,sysc-delay-us". Let's also reorder the probe a bit so we have pdata available earlier, and move the PM runtime calls to sysc_init_module() from sysc_read_revision(). Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Родитель
a7199e2b91
Коммит
566a9b05e1
|
@ -50,6 +50,8 @@ static const char * const clock_names[] = { "fck", "ick", };
|
|||
* @legacy_mode: configured for legacy mode if set
|
||||
* @cap: interconnect target module capabilities
|
||||
* @cfg: interconnect target module configuration
|
||||
* @name: name if available
|
||||
* @revision: interconnect target module revision
|
||||
*/
|
||||
struct sysc {
|
||||
struct device *dev;
|
||||
|
@ -61,12 +63,32 @@ struct sysc {
|
|||
const char *legacy_mode;
|
||||
const struct sysc_capabilities *cap;
|
||||
struct sysc_config cfg;
|
||||
const char *name;
|
||||
u32 revision;
|
||||
};
|
||||
|
||||
static u32 sysc_read(struct sysc *ddata, int offset)
|
||||
{
|
||||
if (ddata->cfg.quirks & SYSC_QUIRK_16BIT) {
|
||||
u32 val;
|
||||
|
||||
val = readw_relaxed(ddata->module_va + offset);
|
||||
val |= (readw_relaxed(ddata->module_va + offset + 4) << 16);
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
return readl_relaxed(ddata->module_va + offset);
|
||||
}
|
||||
|
||||
static u32 sysc_read_revision(struct sysc *ddata)
|
||||
{
|
||||
return readl_relaxed(ddata->module_va +
|
||||
ddata->offsets[SYSC_REVISION]);
|
||||
int offset = ddata->offsets[SYSC_REVISION];
|
||||
|
||||
if (offset < 0)
|
||||
return 0;
|
||||
|
||||
return sysc_read(ddata, offset);
|
||||
}
|
||||
|
||||
static int sysc_get_one_clock(struct sysc *ddata,
|
||||
|
@ -393,22 +415,12 @@ static int sysc_map_and_check_registers(struct sysc *ddata)
|
|||
*/
|
||||
static int sysc_show_rev(char *bufp, struct sysc *ddata)
|
||||
{
|
||||
int error, len;
|
||||
int len;
|
||||
|
||||
if (ddata->offsets[SYSC_REVISION] < 0)
|
||||
return sprintf(bufp, ":NA");
|
||||
|
||||
error = pm_runtime_get_sync(ddata->dev);
|
||||
if (error < 0) {
|
||||
pm_runtime_put_noidle(ddata->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
len = sprintf(bufp, ":%08x", sysc_read_revision(ddata));
|
||||
|
||||
pm_runtime_mark_last_busy(ddata->dev);
|
||||
pm_runtime_put_autosuspend(ddata->dev);
|
||||
len = sprintf(bufp, ":%08x", ddata->revision);
|
||||
|
||||
return len;
|
||||
}
|
||||
|
@ -488,6 +500,66 @@ static const struct dev_pm_ops sysc_pm_ops = {
|
|||
NULL)
|
||||
};
|
||||
|
||||
/* At this point the module is configured enough to read the revision */
|
||||
static int sysc_init_module(struct sysc *ddata)
|
||||
{
|
||||
int error;
|
||||
|
||||
error = pm_runtime_get_sync(ddata->dev);
|
||||
if (error < 0) {
|
||||
pm_runtime_put_noidle(ddata->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
ddata->revision = sysc_read_revision(ddata);
|
||||
pm_runtime_put_sync(ddata->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Device tree configured quirks */
|
||||
struct sysc_dts_quirk {
|
||||
const char *name;
|
||||
u32 mask;
|
||||
};
|
||||
|
||||
static const struct sysc_dts_quirk sysc_dts_quirks[] = {
|
||||
{ .name = "ti,no-idle-on-init",
|
||||
.mask = SYSC_QUIRK_NO_IDLE_ON_INIT, },
|
||||
{ .name = "ti,no-reset-on-init",
|
||||
.mask = SYSC_QUIRK_NO_RESET_ON_INIT, },
|
||||
};
|
||||
|
||||
static int sysc_init_dts_quirks(struct sysc *ddata)
|
||||
{
|
||||
struct device_node *np = ddata->dev->of_node;
|
||||
const struct property *prop;
|
||||
int i, len, error;
|
||||
u32 val;
|
||||
|
||||
ddata->legacy_mode = of_get_property(np, "ti,hwmods", NULL);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(sysc_dts_quirks); i++) {
|
||||
prop = of_get_property(np, sysc_dts_quirks[i].name, &len);
|
||||
if (!prop)
|
||||
break;
|
||||
|
||||
ddata->cfg.quirks |= sysc_dts_quirks[i].mask;
|
||||
}
|
||||
|
||||
error = of_property_read_u32(np, "ti,sysc-delay-us", &val);
|
||||
if (!error) {
|
||||
if (val > 255) {
|
||||
dev_warn(ddata->dev, "bad ti,sysc-delay-us: %i\n",
|
||||
val);
|
||||
}
|
||||
|
||||
ddata->cfg.srst_udelay = (u8)val;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sysc_unprepare(struct sysc *ddata)
|
||||
{
|
||||
int i;
|
||||
|
@ -722,7 +794,6 @@ static int sysc_init_match(struct sysc *ddata)
|
|||
|
||||
static int sysc_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct sysc *ddata;
|
||||
int error;
|
||||
|
||||
|
@ -731,12 +802,16 @@ static int sysc_probe(struct platform_device *pdev)
|
|||
return -ENOMEM;
|
||||
|
||||
ddata->dev = &pdev->dev;
|
||||
ddata->legacy_mode = of_get_property(np, "ti,hwmods", NULL);
|
||||
platform_set_drvdata(pdev, ddata);
|
||||
|
||||
error = sysc_init_match(ddata);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
error = sysc_init_dts_quirks(ddata);
|
||||
if (error)
|
||||
goto unprepare;
|
||||
|
||||
error = sysc_get_clocks(ddata);
|
||||
if (error)
|
||||
return error;
|
||||
|
@ -745,9 +820,12 @@ static int sysc_probe(struct platform_device *pdev)
|
|||
if (error)
|
||||
goto unprepare;
|
||||
|
||||
platform_set_drvdata(pdev, ddata);
|
||||
|
||||
pm_runtime_enable(ddata->dev);
|
||||
|
||||
error = sysc_init_module(ddata);
|
||||
if (error)
|
||||
goto unprepare;
|
||||
|
||||
error = pm_runtime_get_sync(ddata->dev);
|
||||
if (error < 0) {
|
||||
pm_runtime_put_noidle(ddata->dev);
|
||||
|
|
|
@ -41,6 +41,10 @@ struct sysc_regbits {
|
|||
s8 emufree_shift;
|
||||
};
|
||||
|
||||
#define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6)
|
||||
#define SYSC_QUIRK_NO_RESET_ON_INIT BIT(5)
|
||||
#define SYSC_QUIRK_OPT_CLKS_NEEDED BIT(4)
|
||||
#define SYSC_QUIRK_OPT_CLKS_IN_RESET BIT(3)
|
||||
#define SYSC_QUIRK_16BIT BIT(2)
|
||||
#define SYSC_QUIRK_UNCACHED BIT(1)
|
||||
#define SYSC_QUIRK_USE_CLOCKACT BIT(0)
|
||||
|
@ -61,9 +65,11 @@ struct sysc_capabilities {
|
|||
|
||||
/**
|
||||
* struct sysc_config - configuration for an interconnect target module
|
||||
* @srst_udelay: optional delay needed after OCP soft reset
|
||||
* @quirks: bitmask of enabled quirks
|
||||
*/
|
||||
struct sysc_config {
|
||||
u8 srst_udelay;
|
||||
u32 quirks;
|
||||
};
|
||||
|
||||
|
|
Загрузка…
Ссылка в новой задаче