microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

The imx soc changes for 3.10: 

* Enable anatop, well bisa and RBC for suspend to optimize the power
   consumption a little bit
 * Clock changes for TVE, LDB, PATA, SRTC support
 * Add System Reset Controller (SRC) support for imx5 and imx6
 * Add initial imx6dl support based on imx6q code
 * Kconfig for cpufreq-cpu0, defconfig updates and few other changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRZ/viAAoJEFBXWFqHsHzOyqUH/2t7CCwlfTVUJYDCeo6PaE9x
 41cV5zG6RvX1OfkRUmJ2N2klGn4zhwg6GHsCDQmvs+IODs4E7JeB9M92FAaPng71
 NnuuwCQ01iIoaTtkz8z/n3tSet3fYB+xfNCMJoWIyS0edFFkCjOgnqRsA0pHRIOp
 G6ey1kU80D0f4+DjAUg1mkIvJrZxbRKDwmwqfDGJzQ4VU7cv70n027YuMKbeMyCC
 zdeKmpKSEl9AY+O/zeMrf03zEW+kdZ4eB6cTUFlpzYwPYY9o+XHx0U0535F7/x4+
 KObUZ9Qg7liP5WO3ZzkVff5HJqPs6s/q99eOsU4/okF1x0fpq2mSgIHlSw4HpK8=
 =TuTx
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc2

From Shawn Guo:
The imx soc changes for 3.10:

* Enable anatop, well bisa and RBC for suspend to optimize the power
  consumption a little bit
* Clock changes for TVE, LDB, PATA, SRTC support
* Add System Reset Controller (SRC) support for imx5 and imx6
* Add initial imx6dl support based on imx6q code
* Kconfig for cpufreq-cpu0, defconfig updates and few other changes

* tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (275 commits)
  ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
  ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
  ARM i.MX53: make tve_ext_sel propagate rate change to PLL
  ARM i.MX53: Remove unused tve_gate clkdev entry
  ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
  ARM: i.MX5: Add PATA and SRTC clocks
  ARM: imx: do not bring up unavailable cores
  ARM: imx: add initial imx6dl support
  ARM: imx1: mm: add call to mxc_device_init
  ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
  ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
  ARM: i.MX53 Add the cko1, cko2 clock outputs.
  staging: drm/imx: Use SRC to reset IPU
  ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)
  ARM: imx: do not use regmap_read for ANADIG_DIGPROG
  ARM i.MX6q: set the LDB serial clock parent to the video PLL
  ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1
  ARM i.MX6q: fix ldb di divider and selector clocks
  ARM i.MX53: fix ldb di divider and selector clocks
  ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Trivial change/change conflict in arch/arm/mach-imx/mach-imx6q.c resolved.
This commit is contained in:
Olof Johansson 2013-04-12 23:55:05 -07:00
Родитель f6940610c7 80f72d2d33
Коммит 567b1b0839
312 изменённых файлов: 3525 добавлений и 2137 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

14
Documentation/devicetree/bindings/clock/imx5-clock.txt
Просмотреть файл

@ -38,7 +38,6 @@ clocks and IDs.
usb_phy_podf 23
cpu_podf 24
di_pred 25
tve_di 26
tve_s 27
uart1_ipg_gate 28
uart1_per_gate 29
@ -172,6 +171,19 @@ clocks and IDs.
can1_serial_gate 157
can1_ipg_gate 158
owire_gate 159
gpu3d_s 160
gpu2d_s 161
gpu3d_gate 162
gpu2d_gate 163
garb_gate 164
cko1_sel 165
cko1_podf 166
cko1 167
cko2_sel 168
cko2_podf 169
cko2 170
srtc_gate 171
pata_gate 172
Examples (for mx53):

3
Documentation/devicetree/bindings/clock/imx6q-clock.txt
Просмотреть файл

@ -205,6 +205,9 @@ clocks and IDs.
enet_ref 190
usbphy1_gate 191
usbphy2_gate 192
pll4_post_div 193
pll5_post_div 194
pll5_video_div 195
Examples:

49
Documentation/devicetree/bindings/reset/fsl,imx-src.txt Normal file
Просмотреть файл

@ -0,0 +1,49 @@
Freescale i.MX System Reset Controller
======================================
Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: Should be "fsl,<chip>-src"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain SRC interrupt and CPU WDOG interrupt,
in this order.
- #reset-cells: 1, see below
example:
src: src@020d8000 {
compatible = "fsl,imx6q-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 0x04 0 96 0x04>;
#reset-cells = <1>;
};
Specifying reset lines connected to IP modules
==============================================
The system reset controller can be used to reset the GPU, VPU,
IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
nodes should specify the reset line on the SRC in their resets
property, containing a phandle to the SRC device node and a
RESET_INDEX specifying which module to reset, as described in
reset.txt
example:
ipu1: ipu@02400000 {
resets = <&src 2>;
};
ipu2: ipu@02800000 {
resets = <&src 4>;
};
The following RESET_INDEX values are valid for i.MX5:
GPU_RESET 0
VPU_RESET 1
IPU1_RESET 2
OPEN_VG_RESET 3
The following additional RESET_INDEX value is valid for i.MX6:
IPU2_RESET 4

75
Documentation/devicetree/bindings/reset/reset.txt Normal file
Просмотреть файл

@ -0,0 +1,75 @@
= Reset Signal Device Tree Bindings =
This binding is intended to represent the hardware reset signals present
internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole
standalone chips are most likely better represented as GPIOs, although there
are likely to be exceptions to this rule.
Hardware blocks typically receive a reset signal. This signal is generated by
a reset provider (e.g. power management or clock module) and received by a
reset consumer (the module being reset, or a module managing when a sub-
ordinate module is reset). This binding exists to represent the provider and
consumer, and provide a way to couple the two together.
A reset signal is represented by the phandle of the provider, plus a reset
specifier - a list of DT cells that represents the reset signal within the
provider. The length (number of cells) and semantics of the reset specifier
are dictated by the binding of the reset provider, although common schemes
are described below.
A word on where to place reset signal consumers in device tree: It is possible
in hardware for a reset signal to affect multiple logically separate HW blocks
at once. In this case, it would be unwise to represent this reset signal in
the DT node of each affected HW block, since if activated, an unrelated block
may be reset. Instead, reset signals should be represented in the DT node
where it makes most sense to control it; this may be a bus node if all
children of the bus are affected by the reset signal, or an individual HW
block node for dedicated reset signals. The intent of this binding is to give
appropriate software access to the reset signals in order to manage the HW,
rather than to slavishly enumerate the reset signal that affects each HW
block.
= Reset providers =
Required properties:
#reset-cells: Number of cells in a reset specifier; Typically 0 for nodes
with a single reset output and 1 for nodes with multiple
reset outputs.
For example:
rst: reset-controller {
#reset-cells = <1>;
};
= Reset consumers =
Required properties:
resets: List of phandle and reset specifier pairs, one pair
for each reset signal that affects the device, or that the
device manages. Note: if the reset provider specifies '0' for
#reset-cells, then only the phandle portion of the pair will
appear.
Optional properties:
reset-names: List of reset signal name strings sorted in the same order as
the resets property. Consumers drivers will use reset-names to
match reset signal names with reset specifiers.
For example:
device {
resets = <&rst 20>;
reset-names = "reset";
};
This represents a device with a single reset signal named "reset".
bus {
resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>;
reset-names = "i2s1", "i2s2", "dma", "mixer";
};
This represents a bus that controls the reset signal of each of four sub-
ordinate devices. Consider for example a bus that fails to operate unless no
child device has reset asserted.

3
Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
Просмотреть файл

@ -8,6 +8,8 @@ Required properties:
- interrupts: Should contain sync interrupt and error interrupt,
in this order.
- #crtc-cells: 1, See below
- resets: phandle pointing to the system reset controller and
reset line index, see reset/fsl,imx-src.txt for details
example:
@ -16,6 +18,7 @@ ipu: ipu@18000000 {
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
resets = <&src 2>;
};
Parallel display support

5
Documentation/sound/alsa/ALSA-Configuration.txt
Просмотреть файл

@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
power_save - Automatic power-saving timeout (in second, 0 =
disable)
power_save_controller - Support runtime D3 of HD-audio controller
(-1 = on for supported chip (default), false = off,
true = force to on even for unsupported hardware)
power_save_controller - Reset HD-audio controller in power-saving mode
(default = on)
align_buffer_size - Force rounding of buffer/period sizes to multiples
of 128 bytes. This is more efficient in terms of memory
access but isn't required by the HDA spec and prevents

4
MAINTAINERS
Просмотреть файл

@ -5065,9 +5065,8 @@ S: Maintained
F: drivers/net/ethernet/marvell/sk*
MARVELL LIBERTAS WIRELESS DRIVER
M: Dan Williams <dcbw@redhat.com>
L: libertas-dev@lists.infradead.org
S: Maintained
S: Orphan
F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
@ -5569,6 +5568,7 @@ F: include/uapi/linux/if_*
F: include/uapi/linux/netdevice.h
NETXEN (1/10) GbE SUPPORT
M: Manish Chopra <manish.chopra@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: Rajesh Borundia <rajesh.borundia@qlogic.com>
L: netdev@vger.kernel.org

2
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc6
NAME = Unicycling Gorilla
# *DOCUMENTATION*

2
arch/alpha/Makefile
Просмотреть файл

@ -12,7 +12,7 @@ NM := $(NM) -B
LDFLAGS_vmlinux := -static -N #-relax
CHECKFLAGS += -D__alpha__ -m64
cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data
cflags-y := -pipe -mno-fp-regs -ffixed-8
cflags-y += $(call cc-option, -fno-jump-tables)
cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4

2
arch/alpha/include/asm/floppy.h
Просмотреть файл

@ -26,7 +26,7 @@
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
#define fd_cacheflush(addr,size) /* nothing */
#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt,\
IRQF_DISABLED, "floppy", NULL)
0, "floppy", NULL)
#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
#ifdef CONFIG_PCI

7
arch/alpha/kernel/irq.c
Просмотреть файл

@ -117,13 +117,6 @@ handle_irq(int irq)
return;
}
/*
* From here we must proceed with IPL_MAX. Note that we do not
* explicitly enable interrupts afterwards - some MILO PALcode
* (namely LX164 one) seems to have severe problems with RTI
* at IPL 0.
*/
local_irq_disable();
irq_enter();
generic_handle_irq_desc(irq, desc);
irq_exit();

10
arch/alpha/kernel/irq_alpha.c
Просмотреть файл

@ -45,6 +45,14 @@ do_entInt(unsigned long type, unsigned long vector,
unsigned long la_ptr, struct pt_regs *regs)
{
struct pt_regs *old_regs;
/*
* Disable interrupts during IRQ handling.
* Note that there is no matching local_irq_enable() due to
* severe problems with RTI at IPL0 and some MILO PALcode
* (namely LX164).
*/
local_irq_disable();
switch (type) {
case 0:
#ifdef CONFIG_SMP
@ -62,7 +70,6 @@ do_entInt(unsigned long type, unsigned long vector,
{
long cpu;
local_irq_disable();
smp_percpu_timer_interrupt(regs);
cpu = smp_processor_id();
if (cpu != boot_cpuid) {
@ -222,7 +229,6 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
struct irqaction timer_irqaction = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED,
.name = "timer",
};

5
arch/alpha/kernel/sys_nautilus.c
Просмотреть файл

@ -188,6 +188,10 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
extern void free_reserved_mem(void *, void *);
extern void pcibios_claim_one_bus(struct pci_bus *);
static struct resource irongate_io = {
.name = "Irongate PCI IO",
.flags = IORESOURCE_IO,
};
static struct resource irongate_mem = {
.name = "Irongate PCI MEM",
.flags = IORESOURCE_MEM,
@ -209,6 +213,7 @@ nautilus_init_pci(void)
irongate = pci_get_bus_and_slot(0, 0);
bus->self = irongate;
bus->resource[0] = &irongate_io;
bus->resource[1] = &irongate_mem;
pci_bus_size_bridges(bus);

14
arch/alpha/kernel/sys_titan.c
Просмотреть файл

@ -280,15 +280,15 @@ titan_late_init(void)
* all reported to the kernel as machine checks, so the handler
* is a nop so it can be called to count the individual events.
*/
titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
titan_request_irq(63+16, titan_intr_nop, 0,
"CChip Error", NULL);
titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
titan_request_irq(62+16, titan_intr_nop, 0,
"PChip 0 H_Error", NULL);
titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
titan_request_irq(61+16, titan_intr_nop, 0,
"PChip 1 H_Error", NULL);
titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
titan_request_irq(60+16, titan_intr_nop, 0,
"PChip 0 C_Error", NULL);
titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
titan_request_irq(59+16, titan_intr_nop, 0,
"PChip 1 C_Error", NULL);
/*
@ -348,9 +348,9 @@ privateer_init_pci(void)
* Hook a couple of extra err interrupts that the
* common titan code won't.
*/
titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
titan_request_irq(53+16, titan_intr_nop, 0,
"NMI", NULL);
titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
titan_request_irq(50+16, titan_intr_nop, 0,
"Temperature Warning", NULL);
/*

21
arch/arm/Kconfig
Просмотреть файл

@ -1183,9 +1183,9 @@ config ARM_NR_BANKS
default 8
config IWMMXT
bool "Enable iWMMXt support"
bool "Enable iWMMXt support" if !CPU_PJ4
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
default y if PXA27x || PXA3xx || ARCH_MMP
default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
@ -1439,6 +1439,16 @@ config ARM_ERRATA_775420
to deadlock. This workaround puts DSB before executing ISB if
an abort may occur on cache maintenance.
config ARM_ERRATA_798181
bool "ARM errata: TLBI/DSB failure on Cortex-A15"
depends on CPU_V7 && SMP
help
On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
adequately shooting down all use of the old entries. This
option enables the Linux kernel workaround for this erratum
which sends an IPI to the CPUs that are running the same ASID
as the one being invalidated.
endmenu
source "arch/arm/common/Kconfig"
@ -2154,13 +2164,6 @@ if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_IMX
tristate "CPUfreq driver for i.MX CPUs"
depends on ARCH_MXC && CPU_FREQ
select CPU_FREQ_TABLE
help
This enables the CPUfreq driver for i.MX CPUs.
config CPU_FREQ_SA1100
bool

4
arch/arm/Kconfig.debug
Просмотреть файл

@ -234,11 +234,11 @@ choice
on i.MX53.
config DEBUG_IMX6Q_UART
bool "i.MX6Q Debug UART"
bool "i.MX6Q/DL Debug UART"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
on i.MX6Q.
on i.MX6Q/DL.
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"

2
arch/arm/boot/dts/armada-370-mirabox.dts
Просмотреть файл

@ -54,7 +54,7 @@
};
mvsdio@d00d4000 {
pinctrl-0 = <&sdio_pins2>;
pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
status = "okay";
/*

6
arch/arm/boot/dts/armada-370.dtsi
Просмотреть файл

@ -59,6 +59,12 @@
"mpp50", "mpp51", "mpp52";
marvell,function = "sd0";
};
sdio_pins3: sdio-pins3 {
marvell,pins = "mpp48", "mpp49", "mpp50",
"mpp51", "mpp52", "mpp53";
marvell,function = "sd0";
};
};
gpio0: gpio@d0018100 {

4
arch/arm/boot/dts/dbx5x0.dtsi
Просмотреть файл

@ -191,8 +191,8 @@
prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x1000>;
reg-names = "prcmu";
reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
interrupts = <0 47 0x4>;
#address-cells = <1>;
#size-cells = <1>;

1
arch/arm/boot/dts/imx6qdl.dtsi
Просмотреть файл

@ -91,6 +91,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
clocks = <&clks 15>;
};
L2: l2-cache@00a02000 {

1
arch/arm/boot/dts/kirkwood-goflexnet.dts
Просмотреть файл

@ -77,6 +77,7 @@
};
nand@3000000 {
chip-delay = <40>;
status = "okay";
partition@0 {

9
arch/arm/boot/dts/orion5x.dtsi
Просмотреть файл

@ -13,6 +13,9 @@
compatible = "marvell,orion5x";
interrupt-parent = <&intc>;
aliases {
gpio0 = &gpio0;
};
intc: interrupt-controller {
compatible = "marvell,orion-intc", "marvell,intc";
interrupt-controller;
@ -32,7 +35,9 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
ngpio = <32>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <6>, <7>, <8>, <9>;
};
@ -91,7 +96,7 @@
reg = <0x90000 0x10000>,
<0xf2200000 0x800>;
reg-names = "regs", "sram";
interrupts = <22>;
interrupts = <28>;
status = "okay";
};
};

1
arch/arm/configs/imx_v4_v5_defconfig
Просмотреть файл

@ -109,6 +109,7 @@ CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y

1
arch/arm/configs/imx_v6_v7_defconfig
Просмотреть файл

@ -9,6 +9,7 @@ CONFIG_CGROUPS=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y

2
arch/arm/include/asm/delay.h
Просмотреть файл

@ -24,7 +24,7 @@ extern struct arm_delay_ops {
void (*delay)(unsigned long);
void (*const_udelay)(unsigned long);
void (*udelay)(unsigned long);
bool const_clock;
unsigned long ticks_per_jiffy;
} arm_delay_ops;
#define __delay(n) arm_delay_ops.delay(n)

7
arch/arm/include/asm/highmem.h
Просмотреть файл

@ -41,6 +41,13 @@ extern void kunmap_high(struct page *page);
#endif
#endif
/*
* Needed to be able to broadcast the TLB invalidation for kmap.
*/
#ifdef CONFIG_ARM_ERRATA_798181
#undef ARCH_NEEDS_KMAP_HIGH_GET
#endif
#ifdef ARCH_NEEDS_KMAP_HIGH_GET
extern void *kmap_high_get(struct page *page);
#else

2
arch/arm/include/asm/mmu_context.h
Просмотреть файл

@ -27,6 +27,8 @@ void __check_vmalloc_seq(struct mm_struct *mm);
void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
DECLARE_PER_CPU(atomic64_t, active_asids);
#else /* !CONFIG_CPU_HAS_ASID */
#ifdef CONFIG_MMU

15
arch/arm/include/asm/tlbflush.h
Просмотреть файл

@ -450,6 +450,21 @@ static inline void local_flush_bp_all(void)
isb();
}
#ifdef CONFIG_ARM_ERRATA_798181
static inline void dummy_flush_tlb_a15_erratum(void)
{
/*
* Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
*/
asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
dsb();
}
#else
static inline void dummy_flush_tlb_a15_erratum(void)
{
}
#endif
/*
* flush_pmd_entry
*

12
arch/arm/kernel/entry-common.S
Просмотреть файл

@ -276,7 +276,13 @@ ENDPROC(ftrace_graph_caller_old)
*/
.macro mcount_enter
/*
* This pad compensates for the push {lr} at the call site. Note that we are
* unable to unwind through a function which does not otherwise save its lr.
*/
UNWIND(.pad #4)
stmdb sp!, {r0-r3, lr}
UNWIND(.save {r0-r3, lr})
.endm
.macro mcount_get_lr reg
@ -289,6 +295,7 @@ ENDPROC(ftrace_graph_caller_old)
.endm
ENTRY(__gnu_mcount_nc)
UNWIND(.fnstart)
#ifdef CONFIG_DYNAMIC_FTRACE
mov ip, lr
ldmia sp!, {lr}
@ -296,17 +303,22 @@ ENTRY(__gnu_mcount_nc)
#else
__mcount
#endif
UNWIND(.fnend)
ENDPROC(__gnu_mcount_nc)
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(ftrace_caller)
UNWIND(.fnstart)
__ftrace_caller
UNWIND(.fnend)
ENDPROC(ftrace_caller)
#endif
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
ENTRY(ftrace_graph_caller)
UNWIND(.fnstart)
__ftrace_graph_caller
UNWIND(.fnend)
ENDPROC(ftrace_graph_caller)
#endif

2
arch/arm/kernel/head.S
Просмотреть файл

@ -267,7 +267,7 @@ __create_page_tables:
addne r6, r6, #1 << SECTION_SHIFT
strne r6, [r3]
#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
sub r4, r4, #4 @ Fixup page table pointer
@ for 64-bit descriptors
#endif

6
arch/arm/kernel/hw_breakpoint.c
Просмотреть файл

@ -966,7 +966,7 @@ static void reset_ctrl_regs(void *unused)
}
if (err) {
pr_warning("CPU %d debug is powered down!\n", cpu);
pr_warn_once("CPU %d debug is powered down!\n", cpu);
cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
return;
}
@ -987,7 +987,7 @@ clear_vcr:
isb();
if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
pr_warning("CPU %d failed to disable vector catch\n", cpu);
pr_warn_once("CPU %d failed to disable vector catch\n", cpu);
return;
}
@ -1007,7 +1007,7 @@ clear_vcr:
}
if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
pr_warning("CPU %d failed to clear debug register pairs\n", cpu);
pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu);
return;
}

24
arch/arm/kernel/setup.c
Просмотреть файл

@ -353,6 +353,23 @@ void __init early_print(const char *str, ...)
printk("%s", buf);
}
static void __init cpuid_init_hwcaps(void)
{
unsigned int divide_instrs;
if (cpu_architecture() < CPU_ARCH_ARMv7)
return;
divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24;
switch (divide_instrs) {
case 2:
elf_hwcap |= HWCAP_IDIVA;
case 1:
elf_hwcap |= HWCAP_IDIVT;
}
}
static void __init feat_v6_fixup(void)
{
int id = read_cpuid_id();
@ -483,8 +500,11 @@ static void __init setup_processor(void)
snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
cpuid_init_hwcaps();
#ifndef CONFIG_ARM_THUMB
elf_hwcap &= ~HWCAP_THUMB;
elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
#endif
feat_v6_fixup();
@ -524,7 +544,7 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
size -= start & ~PAGE_MASK;
bank->start = PAGE_ALIGN(start);
#ifndef CONFIG_LPAE
#ifndef CONFIG_ARM_LPAE
if (bank->start + size < bank->start) {
printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
"32-bit physical address space\n", (long long)start);

3
arch/arm/kernel/smp.c
Просмотреть файл

@ -673,9 +673,6 @@ static int cpufreq_callback(struct notifier_block *nb,
if (freq->flags & CPUFREQ_CONST_LOOPS)
return NOTIFY_OK;
if (arm_delay_ops.const_clock)
return NOTIFY_OK;
if (!per_cpu(l_p_j_ref, cpu)) {
per_cpu(l_p_j_ref, cpu) =
per_cpu(cpu_data, cpu).loops_per_jiffy;

66
arch/arm/kernel/smp_tlb.c
Просмотреть файл

@ -12,6 +12,7 @@
#include <asm/smp_plat.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
/**********************************************************************/
@ -69,12 +70,72 @@ static inline void ipi_flush_bp_all(void *ignored)
local_flush_bp_all();
}
#ifdef CONFIG_ARM_ERRATA_798181
static int erratum_a15_798181(void)
{
unsigned int midr = read_cpuid_id();
/* Cortex-A15 r0p0..r3p2 affected */
if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
return 0;
return 1;
}
#else
static int erratum_a15_798181(void)
{
return 0;
}
#endif
static void ipi_flush_tlb_a15_erratum(void *arg)
{
dmb();
}
static void broadcast_tlb_a15_erratum(void)
{
if (!erratum_a15_798181())
return;
dummy_flush_tlb_a15_erratum();
smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum,
NULL, 1);
}
static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
{
int cpu;
cpumask_t mask = { CPU_BITS_NONE };
if (!erratum_a15_798181())
return;
dummy_flush_tlb_a15_erratum();
for_each_online_cpu(cpu) {
if (cpu == smp_processor_id())
continue;
/*
* We only need to send an IPI if the other CPUs are running
* the same ASID as the one being invalidated. There is no
* need for locking around the active_asids check since the
* switch_mm() function has at least one dmb() (as required by
* this workaround) in case a context switch happens on
* another CPU after the condition below.
*/
if (atomic64_read(&mm->context.id) ==
atomic64_read(&per_cpu(active_asids, cpu)))
cpumask_set_cpu(cpu, &mask);
}
smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
}
void flush_tlb_all(void)
{
if (tlb_ops_need_broadcast())
on_each_cpu(ipi_flush_tlb_all, NULL, 1);
else
local_flush_tlb_all();
broadcast_tlb_a15_erratum();
}
void flush_tlb_mm(struct mm_struct *mm)
@ -83,6 +144,7 @@ void flush_tlb_mm(struct mm_struct *mm)
on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
else
local_flush_tlb_mm(mm);
broadcast_tlb_mm_a15_erratum(mm);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@ -95,6 +157,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
&ta, 1);
} else
local_flush_tlb_page(vma, uaddr);
broadcast_tlb_mm_a15_erratum(vma->vm_mm);
}
void flush_tlb_kernel_page(unsigned long kaddr)
@ -105,6 +168,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
} else
local_flush_tlb_kernel_page(kaddr);
broadcast_tlb_a15_erratum();
}
void flush_tlb_range(struct vm_area_struct *vma,
@ -119,6 +183,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
&ta, 1);
} else
local_flush_tlb_range(vma, start, end);
broadcast_tlb_mm_a15_erratum(vma->vm_mm);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@ -130,6 +195,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
} else
local_flush_tlb_kernel_range(start, end);
broadcast_tlb_a15_erratum();
}
void flush_bp_all(void)

35
arch/arm/kvm/vgic.c
Просмотреть файл

@ -883,8 +883,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
lr, irq, vgic_cpu->vgic_lr[lr]);
BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT;
goto out;
return true;
}
/* Try to use another LR for this interrupt */
@ -898,7 +897,6 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
vgic_cpu->vgic_irq_lr_map[irq] = lr;
set_bit(lr, vgic_cpu->lr_used);
out:
if (!vgic_irq_is_edge(vcpu, irq))
vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI;
@ -1018,21 +1016,6 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
/*
* We do not need to take the distributor lock here, since the only
* action we perform is clearing the irq_active_bit for an EOIed
* level interrupt. There is a potential race with
* the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we
* check if the interrupt is already active. Two possibilities:
*
* - The queuing is occurring on the same vcpu: cannot happen,
* as we're already in the context of this vcpu, and
* executing the handler
* - The interrupt has been migrated to another vcpu, and we
* ignore this interrupt for this run. Big deal. It is still
* pending though, and will get considered when this vcpu
* exits.
*/
if (vgic_cpu->vgic_misr & GICH_MISR_EOI) {
/*
* Some level interrupts have been EOIed. Clear their
@ -1054,6 +1037,13 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
} else {
vgic_cpu_irq_clear(vcpu, irq);
}
/*
* Despite being EOIed, the LR may not have
* been marked as empty.
*/
set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
}
}
@ -1064,9 +1054,8 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
}
/*
* Sync back the VGIC state after a guest run. We do not really touch
* the distributor here (the irq_pending_on_cpu bit is safe to set),
* so there is no need for taking its lock.
* Sync back the VGIC state after a guest run. The distributor lock is
* needed so we don't get preempted in the middle of the state processing.
*/
static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
{
@ -1112,10 +1101,14 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
{
struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
if (!irqchip_in_kernel(vcpu->kvm))
return;
spin_lock(&dist->lock);
__kvm_vgic_sync_hwstate(vcpu);
spin_unlock(&dist->lock);
}
int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)

8
arch/arm/lib/delay.c
Просмотреть файл

@ -58,7 +58,7 @@ static void __timer_delay(unsigned long cycles)
static void __timer_const_udelay(unsigned long xloops)
{
unsigned long long loops = xloops;
loops *= loops_per_jiffy;
loops *= arm_delay_ops.ticks_per_jiffy;
__timer_delay(loops >> UDELAY_SHIFT);
}
@ -73,11 +73,13 @@ void __init register_current_timer_delay(const struct delay_timer *timer)
pr_info("Switching to timer-based delay loop\n");
delay_timer = timer;
lpj_fine = timer->freq / HZ;
loops_per_jiffy = lpj_fine;
/* cpufreq may scale loops_per_jiffy, so keep a private copy */
arm_delay_ops.ticks_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
arm_delay_ops.const_clock = true;
delay_calibrated = true;
} else {
pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");

16
arch/arm/mach-cns3xxx/core.c
Просмотреть файл

@ -22,19 +22,9 @@
static struct map_desc cns3xxx_io_desc[] __initdata = {
{
.virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
.length = SZ_4K,
.virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
.length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT,

16
arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
Просмотреть файл

@ -94,10 +94,10 @@
#define RTC_INTR_STS_OFFSET 0x34
#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */
#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */
#define CNS3XXX_MISC_BASE_VIRT 0xFB000000 /* Misc Control */
#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */
#define CNS3XXX_PM_BASE_VIRT 0xFFF08000
#define CNS3XXX_PM_BASE_VIRT 0xFB001000
#define PM_CLK_GATE_OFFSET 0x00
#define PM_SOFT_RST_OFFSET 0x04
@ -109,7 +109,7 @@
#define PM_PLL_HM_PD_OFFSET 0x1C
#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */
#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000
#define CNS3XXX_UART0_BASE_VIRT 0xFB002000
#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */
#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000
@ -130,7 +130,7 @@
#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000
#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */
#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800
#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000
#define TIMER1_COUNTER_OFFSET 0x00
#define TIMER1_AUTO_RELOAD_OFFSET 0x04
@ -227,16 +227,16 @@
* Testchip peripheral and fpga gic regions
*/
#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */
#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000
#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFB004000
#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */
#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100
#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
#define CNS3XXX_TC11MP_TWD_BASE 0x90000600
#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600
#define CNS3XXX_TC11MP_TWD_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */
#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000
#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */
#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000

10
arch/arm/mach-ep93xx/include/mach/uncompress.h
Просмотреть файл

@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
static inline void putc(int c)
{
/* Transmit fifo not full? */
while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
;
int i;
for (i = 0; i < 10000; i++) {
/* Transmit fifo not full? */
if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
break;
}
__raw_writeb(c, PHYS_UART_DATA);
}

28
arch/arm/mach-imx/Kconfig
Просмотреть файл

@ -65,6 +65,9 @@ config IRAM_ALLOC
bool
select GENERIC_ALLOCATOR
config HAVE_IMX_ANATOP
bool
config HAVE_IMX_GPC
bool
@ -73,6 +76,7 @@ config HAVE_IMX_MMDC
config HAVE_IMX_SRC
def_bool y if SMP
select ARCH_HAS_RESET_CONTROLLER
config IMX_HAVE_IOMUX_V1
bool
@ -83,24 +87,12 @@ config ARCH_MXC_IOMUX_V3
config ARCH_MX1
bool
config MACH_MX21
bool
config ARCH_MX25
bool
config MACH_MX27
bool
config ARCH_MX5
bool
config ARCH_MX51
bool
config ARCH_MX53
bool
config SOC_IMX1
bool
select ARCH_MX1
@ -114,7 +106,6 @@ config SOC_IMX21
select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MACH_MX21
select MXC_AVIC
config SOC_IMX25
@ -128,6 +119,8 @@ config SOC_IMX25
config SOC_IMX27
bool
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
@ -155,7 +148,7 @@ config SOC_IMX35
config SOC_IMX5
bool
select ARCH_HAS_CPUFREQ
select ARCH_MX5
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_V7
@ -163,8 +156,6 @@ config SOC_IMX5
config SOC_IMX51
bool
select ARCH_MX5
select ARCH_MX51
select PINCTRL
select PINCTRL_IMX51
select SOC_IMX5
@ -789,8 +780,6 @@ comment "Device tree only"
config SOC_IMX53
bool "i.MX53 support"
select ARCH_MX5
select ARCH_MX53
select HAVE_CAN_FLEXCAN if CAN
select IMX_HAVE_PLATFORM_IMX2_WDT
select PINCTRL
@ -801,7 +790,7 @@ config SOC_IMX53
This enables support for Freescale i.MX53 processor.
config SOC_IMX6Q
bool "i.MX6 Quad support"
bool "i.MX6 Quad/DualLite support"
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
@ -813,6 +802,7 @@ config SOC_IMX6Q
select CPU_V7
select HAVE_ARM_SCU
select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC

4
arch/arm/mach-imx/Makefile
Просмотреть файл

@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o
@ -27,7 +27,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-y += cpuidle.o
@ -92,6 +91,7 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o

35
arch/arm/mach-imx/Makefile.boot
Просмотреть файл

@ -1,35 +0,0 @@
zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000
params_phys-$(CONFIG_SOC_IMX1) := 0x08000100
initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000
zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000
params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100
initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000
zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000
params_phys-$(CONFIG_SOC_IMX25) := 0x80000100
initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000
params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100
initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000
zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000
params_phys-$(CONFIG_SOC_IMX31) := 0x80000100
initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000
params_phys-$(CONFIG_SOC_IMX35) := 0x80000100
initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000
params_phys-$(CONFIG_SOC_IMX51) := 0x90000100
initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000
zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000
params_phys-$(CONFIG_SOC_IMX53) := 0x70000100
initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000

103
arch/arm/mach-imx/anatop.c Normal file
Просмотреть файл

@ -0,0 +1,103 @@
/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include "common.h"
#define REG_SET 0x4
#define REG_CLR 0x8
#define ANADIG_REG_2P5 0x130
#define ANADIG_REG_CORE 0x140
#define ANADIG_ANA_MISC0 0x150
#define ANADIG_USB1_CHRG_DETECT 0x1b0
#define ANADIG_USB2_CHRG_DETECT 0x210
#define ANADIG_DIGPROG 0x260
#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000
#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000
#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000
static struct regmap *anatop;
static void imx_anatop_enable_weak2p5(bool enable)
{
u32 reg, val;
regmap_read(anatop, ANADIG_ANA_MISC0, &val);
/* can only be enabled when stop_mode_config is clear. */
reg = ANADIG_REG_2P5;
reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ?
REG_SET : REG_CLR;
regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG);
}
static void imx_anatop_enable_fet_odrive(bool enable)
{
regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR),
BM_ANADIG_REG_CORE_FET_ODRIVE);
}
void imx_anatop_pre_suspend(void)
{
imx_anatop_enable_weak2p5(true);
imx_anatop_enable_fet_odrive(true);
}
void imx_anatop_post_resume(void)
{
imx_anatop_enable_fet_odrive(false);
imx_anatop_enable_weak2p5(false);
}
void imx_anatop_usb_chrg_detect_disable(void)
{
regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
BM_ANADIG_USB_CHRG_DETECT_EN_B
| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
regmap_write(anatop, ANADIG_USB2_CHRG_DETECT,
BM_ANADIG_USB_CHRG_DETECT_EN_B |
BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
}
u32 imx_anatop_get_digprog(void)
{
struct device_node *np;
void __iomem *anatop_base;
static u32 digprog;
if (digprog)
return digprog;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
anatop_base = of_iomap(np, 0);
WARN_ON(!anatop_base);
digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
return digprog;
}
void __init imx_anatop_init(void)
{
anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
if (IS_ERR(anatop)) {
pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
return;
}
}

4
arch/arm/mach-imx/avic.c
Просмотреть файл

@ -54,8 +54,6 @@
void __iomem *avic_base;
static struct irq_domain *domain;
static u32 avic_saved_mask_reg[2];
#ifdef CONFIG_MXC_IRQ_PRIOR
static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
{
@ -113,6 +111,8 @@ static struct mxc_extra_irq avic_extra_irq = {
};
#ifdef CONFIG_PM
static u32 avic_saved_mask_reg[2];
static void avic_irq_suspend(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);

2
arch/arm/mach-imx/clk-imx27.c
Просмотреть файл

@ -278,8 +278,6 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
clk_register_clkdev(clk[cpu_div], "cpu", NULL);
clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);

2
arch/arm/mach-imx/clk-imx35.c
Просмотреть файл

@ -257,6 +257,7 @@ int __init mx35_clocks_init(void)
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
clk_register_clkdev(clk[admux_gate], "audmux", NULL);
clk_prepare_enable(clk[spba_gate]);
clk_prepare_enable(clk[gpio1_gate]);
@ -265,6 +266,7 @@ int __init mx35_clocks_init(void)
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
clk_prepare_enable(clk[max_gate]);
clk_prepare_enable(clk[iomuxc_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code

75
arch/arm/mach-imx/clk-imx51-imx53.c
Просмотреть файл

@ -45,16 +45,40 @@ static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "
static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", };
static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
static const char *mx53_cko1_sel[] = {
"cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw",
"emi_slow_podf", "pll4_sw", "nfc_podf", "dummy",
"di_pred", "dummy", "dummy", "ahb",
"ipg", "per_root", "ckil", "dummy",};
static const char *mx53_cko2_sel[] = {
"dummy"/* dptc_core */, "dummy"/* dptc_perich */,
"dummy", "esdhc_a_podf",
"usboh3_podf", "dummy"/* wrck_clk_root */,
"ecspi_podf", "dummy"/* pll1_ref_clk */,
"esdhc_b_podf", "dummy"/* ddr_clk_root */,
"dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */,
"vpu_sel", "ipu_sel",
"osc", "ckih1",
"dummy", "esdhc_c_sel",
"ssi1_root_podf", "ssi2_root_podf",
"dummy", "dummy",
"dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */,
"dummy"/* tve_out */, "usb_phy_sel",
"tve_sel", "lp_apm",
"uart_root", "dummy"/* spdif0_clk_root */,
"dummy", "dummy", };
enum imx5_clks {
dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s,
emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred,
usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di,
usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di_unused,
tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
@ -83,7 +107,10 @@ enum imx5_clks {
ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
can_sel, can1_serial_gate, can1_ipg_gate,
owire_gate,
owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate,
cko1_sel, cko1_podf, cko1,
cko2_sel, cko2_podf, cko2,
srtc_gate, pata_gate,
clk_max
};
@ -160,8 +187,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */
clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, tve_sel, ARRAY_SIZE(tve_sel));
clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
@ -200,6 +225,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
clk[gpu3d_s] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel));
clk[gpu2d_s] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel));
clk[gpu3d_gate] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2);
clk[garb_gate] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4);
clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14);
clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
@ -235,6 +265,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28);
clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0);
for (i = 0; i < ARRAY_SIZE(clk); i++)
if (IS_ERR(clk[i]))
@ -286,7 +318,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0");
@ -331,8 +362,10 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel));
clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT);
clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1,
mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel));
clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
@ -423,23 +456,23 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel));
clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
clk[ldb_di1_div] = imx_clk_divider("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1);
clk[ldb_di1_div] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0);
clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT);
clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel));
clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
clk[ldb_di0_div] = imx_clk_divider("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1);
clk[ldb_di0_div] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0);
clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel));
clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
@ -456,6 +489,16 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3);
clk[cko1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7);
clk[cko2_sel] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5,
mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
for (i = 0; i < ARRAY_SIZE(clk); i++)
if (IS_ERR(clk[i]))
pr_err("i.MX53 clk %d: register failed with %ld\n",

129
arch/arm/mach-imx/clk-imx6q.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
@ -22,6 +23,12 @@
#include "clk.h"
#include "common.h"
#include "hardware.h"
#define CCR 0x0
#define BM_CCR_WB_COUNT (0x7 << 16)
#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21)
#define BM_CCR_RBC_EN (0x1 << 27)
#define CCGR0 0x68
#define CCGR1 0x6c
@ -67,6 +74,67 @@ void imx6q_set_chicken_bit(void)
writel_relaxed(val, ccm_base + CGPR);
}
static void imx6q_enable_rbc(bool enable)
{
u32 val;
static bool last_rbc_mode;
if (last_rbc_mode == enable)
return;
/*
* need to mask all interrupts in GPC before
* operating RBC configurations
*/
imx_gpc_mask_all();
/* configure RBC enable bit */
val = readl_relaxed(ccm_base + CCR);
val &= ~BM_CCR_RBC_EN;
val |= enable ? BM_CCR_RBC_EN : 0;
writel_relaxed(val, ccm_base + CCR);
/* configure RBC count */
val = readl_relaxed(ccm_base + CCR);
val &= ~BM_CCR_RBC_BYPASS_COUNT;
val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
writel(val, ccm_base + CCR);
/*
* need to delay at least 2 cycles of CKIL(32K)
* due to hardware design requirement, which is
* ~61us, here we use 65us for safe
*/
udelay(65);
/* restore GPC interrupt mask settings */
imx_gpc_restore_all();
last_rbc_mode = enable;
}
static void imx6q_enable_wb(bool enable)
{
u32 val;
static bool last_wb_mode;
if (last_wb_mode == enable)
return;
/* configure well bias enable bit */
val = readl_relaxed(ccm_base + CLPCR);
val &= ~BM_CLPCR_WB_PER_AT_LPM;
val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
writel_relaxed(val, ccm_base + CLPCR);
/* configure well bias count */
val = readl_relaxed(ccm_base + CCR);
val &= ~BM_CCR_WB_COUNT;
val |= enable ? BM_CCR_WB_COUNT : 0;
writel_relaxed(val, ccm_base + CCR);
last_wb_mode = enable;
}
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
{
u32 val = readl_relaxed(ccm_base + CLPCR);
@ -74,6 +142,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
val &= ~BM_CLPCR_LPM;
switch (mode) {
case WAIT_CLOCKED:
imx6q_enable_wb(false);
imx6q_enable_rbc(false);
break;
case WAIT_UNCLOCKED:
val |= 0x1 << BP_CLPCR_LPM;
@ -92,6 +162,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
imx6q_enable_wb(true);
imx6q_enable_rbc(true);
break;
default:
return -EINVAL;
@ -109,29 +181,29 @@ static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
static const char *audio_sels[] = { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
static const char *pcie_axi_sels[] = { "axi", "ahb", };
static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", };
static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *vdo_axi_sels[] = { "axi", "ahb", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video",
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@ -165,7 +237,7 @@ enum mx6q_clks {
pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
usbphy2_gate, clk_max
usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max
};
static struct clk *clk[clk_max];
@ -182,6 +254,21 @@ static struct clk_div_table clk_enet_ref_table[] = {
{ .val = 3, .div = 4, },
};
static struct clk_div_table post_div_table[] = {
{ .val = 2, .div = 1, },
{ .val = 1, .div = 2, },
{ .val = 0, .div = 4, },
{ }
};
static struct clk_div_table video_div_table[] = {
{ .val = 0, .div = 1, },
{ .val = 1, .div = 2, },
{ .val = 2, .div = 1, },
{ .val = 3, .div = 4, },
{ }
};
int __init mx6q_clocks_init(void)
{
struct device_node *np;
@ -208,6 +295,14 @@ int __init mx6q_clocks_init(void)
base = of_iomap(np, 0);
WARN_ON(!base);
/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
post_div_table[1].div = 1;
post_div_table[2].div = 1;
video_div_table[1].div = 1;
video_div_table[2].div = 1;
};
/* type name parent_name base div_mask */
clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
@ -260,6 +355,10 @@ int __init mx6q_clocks_init(void)
clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
base = of_iomap(np, 0);
WARN_ON(!base);
@ -283,8 +382,8 @@ int __init mx6q_clocks_init(void)
clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
@ -332,9 +431,9 @@ int __init mx6q_clocks_init(void)
clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1);
clk[ldb_di0_podf] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1);
clk[ldb_di1_podf] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
@ -443,12 +542,16 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
clk_register_clkdev(clk[twd], NULL, "smp_twd");
clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
clk_register_clkdev(clk[arm], NULL, "cpu0");
if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
}
/*
* The gpmi needs 100MHz frequency in the EDO/Sync mode,
* We can not get the 100MHz from the pll2_pfd0_352m.

17
arch/arm/mach-imx/clk.h
Просмотреть файл

@ -59,6 +59,14 @@ static inline struct clk *imx_clk_divider(const char *name, const char *parent,
reg, shift, width, 0, &imx_ccm_lock);
}
static inline struct clk *imx_clk_divider_flags(const char *name,
const char *parent, void __iomem *reg, u8 shift, u8 width,
unsigned long flags)
{
return clk_register_divider(NULL, name, parent, flags,
reg, shift, width, 0, &imx_ccm_lock);
}
static inline struct clk *imx_clk_gate(const char *name, const char *parent,
void __iomem *reg, u8 shift)
{
@ -73,6 +81,15 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
width, 0, &imx_ccm_lock);
}
static inline struct clk *imx_clk_mux_flags(const char *name,
void __iomem *reg, u8 shift, u8 width, const char **parents,
int num_parents, unsigned long flags)
{
return clk_register_mux(NULL, name, parents, num_parents,
flags, reg, shift, width, 0,
&imx_ccm_lock);
}
static inline struct clk *imx_clk_fixed_factor(const char *name,
const char *parent, unsigned int mult, unsigned int div)
{

15
arch/arm/mach-imx/common.h
Просмотреть файл

@ -1,5 +1,5 @@
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
@ -74,6 +74,7 @@ extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_restart(char, const char *);
extern void mxc_arch_reset_init(void __iomem *);
extern int mx53_revision(void);
extern int imx6q_revision(void);
extern int mx53_display_revision(void);
extern void imx_set_aips(void __iomem *);
extern int mxc_device_init(void);
@ -110,8 +111,9 @@ void tzic_handle_irq(struct pt_regs *);
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
extern u32 imx_get_cpu_arg(int cpu);
extern void imx_set_cpu_arg(int cpu, u32 arg);
extern void v7_cpu_resume(void);
extern u32 *pl310_get_save_ptr(void);
#ifdef CONFIG_SMP
extern void v7_secondary_startup(void);
extern void imx_scu_map_io(void);
@ -122,13 +124,18 @@ static inline void imx_scu_map_io(void) {}
static inline void imx_smp_prepare(void) {}
static inline void imx_scu_standby_enable(void) {}
#endif
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
extern void imx_src_init(void);
extern void imx_src_prepare_restart(void);
extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
extern void imx_gpc_mask_all(void);
extern void imx_gpc_restore_all(void);
extern void imx_anatop_init(void);
extern void imx_anatop_pre_suspend(void);
extern void imx_anatop_post_resume(void);
extern void imx_anatop_usb_chrg_detect_disable(void);
extern u32 imx_anatop_get_digprog(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_set_chicken_bit(void);

31
arch/arm/mach-imx/cpu_op-mx51.c
Просмотреть файл

@ -1,31 +0,0 @@
/*
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/bug.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include "hardware.h"
static struct cpu_op mx51_cpu_op[] = {
{
.cpu_rate = 160000000,},
{
.cpu_rate = 800000000,},
};
struct cpu_op *mx51_get_cpu_op(int *op)
{
*op = ARRAY_SIZE(mx51_cpu_op);
return mx51_cpu_op;
}

14
arch/arm/mach-imx/cpu_op-mx51.h
Просмотреть файл

@ -1,14 +0,0 @@
/*
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
extern struct cpu_op *mx51_get_cpu_op(int *op);

206
arch/arm/mach-imx/cpufreq.c
Просмотреть файл

@ -1,206 +0,0 @@
/*
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/*
* A driver for the Freescale Semiconductor i.MXC CPUfreq module.
* The CPUFREQ driver is for controlling CPU frequency. It allows you to change
* the CPU clock speed on the fly.
*/
#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
#include "hardware.h"
#define CLK32_FREQ 32768
#define NANOSECOND (1000 * 1000 * 1000)
struct cpu_op *(*get_cpu_op)(int *op);
static int cpu_freq_khz_min;
static int cpu_freq_khz_max;
static struct clk *cpu_clk;
static struct cpufreq_frequency_table *imx_freq_table;
static int cpu_op_nr;
static struct cpu_op *cpu_op_tbl;
static int set_cpu_freq(int freq)
{
int ret = 0;
int org_cpu_rate;
org_cpu_rate = clk_get_rate(cpu_clk);
if (org_cpu_rate == freq)
return ret;
ret = clk_set_rate(cpu_clk, freq);
if (ret != 0) {
printk(KERN_DEBUG "cannot set CPU clock rate\n");
return ret;
}
return ret;
}
static int mxc_verify_speed(struct cpufreq_policy *policy)
{
if (policy->cpu != 0)
return -EINVAL;
return cpufreq_frequency_table_verify(policy, imx_freq_table);
}
static unsigned int mxc_get_speed(unsigned int cpu)
{
if (cpu)
return 0;
return clk_get_rate(cpu_clk) / 1000;
}
static int mxc_set_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
struct cpufreq_freqs freqs;
int freq_Hz;
int ret = 0;
unsigned int index;
cpufreq_frequency_table_target(policy, imx_freq_table,
target_freq, relation, &index);
freq_Hz = imx_freq_table[index].frequency * 1000;
freqs.old = clk_get_rate(cpu_clk) / 1000;
freqs.new = freq_Hz / 1000;
freqs.cpu = 0;
freqs.flags = 0;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
ret = set_cpu_freq(freq_Hz);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return ret;
}
static int mxc_cpufreq_init(struct cpufreq_policy *policy)
{
int ret;
int i;
printk(KERN_INFO "i.MXC CPU frequency driver\n");
if (policy->cpu != 0)
return -EINVAL;
if (!get_cpu_op)
return -EINVAL;
cpu_clk = clk_get(NULL, "cpu_clk");
if (IS_ERR(cpu_clk)) {
printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
return PTR_ERR(cpu_clk);
}
cpu_op_tbl = get_cpu_op(&cpu_op_nr);
cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
imx_freq_table = kmalloc(
sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
GFP_KERNEL);
if (!imx_freq_table) {
ret = -ENOMEM;
goto err1;
}
for (i = 0; i < cpu_op_nr; i++) {
imx_freq_table[i].index = i;
imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
}
imx_freq_table[i].index = i;
imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
policy->cur = clk_get_rate(cpu_clk) / 1000;
policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
/* Manual states, that PLL stabilizes in two CLK32 periods */
policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
if (ret < 0) {
printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
__func__, ret);
goto err;
}
cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
return 0;
err:
kfree(imx_freq_table);
err1:
clk_put(cpu_clk);
return ret;
}
static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
set_cpu_freq(cpu_freq_khz_max * 1000);
clk_put(cpu_clk);
kfree(imx_freq_table);
return 0;
}
static struct cpufreq_driver mxc_driver = {
.flags = CPUFREQ_STICKY,
.verify = mxc_verify_speed,
.target = mxc_set_target,
.get = mxc_get_speed,
.init = mxc_cpufreq_init,
.exit = mxc_cpufreq_exit,
.name = "imx",
};
static int mxc_cpufreq_driver_init(void)
{
return cpufreq_register_driver(&mxc_driver);
}
static void mxc_cpufreq_driver_exit(void)
{
cpufreq_unregister_driver(&mxc_driver);
}
module_init(mxc_cpufreq_driver_init);
module_exit(mxc_cpufreq_driver_exit);
MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
MODULE_DESCRIPTION("CPUfreq driver for i.MX");
MODULE_LICENSE("GPL");

4
arch/arm/mach-imx/devices/Kconfig
Просмотреть файл

@ -86,7 +86,3 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
config IMX_HAVE_PLATFORM_SPI_IMX
bool
config IMX_HAVE_PLATFORM_AHCI
bool
default y if ARCH_MX53

1
arch/arm/mach-imx/devices/Makefile
Просмотреть файл

@ -29,5 +29,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o

10
arch/arm/mach-imx/devices/devices-common.h
Просмотреть файл

@ -344,13 +344,3 @@ struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
int irq, int irq_err);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
#include <linux/ahci_platform.h>
struct imx_ahci_imx_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_ahci_imx(
const struct imx_ahci_imx_data *data,
const struct ahci_platform_data *pdata);

157
arch/arm/mach-imx/devices/platform-ahci-imx.c
Просмотреть файл

@ -1,157 +0,0 @@
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_ahci_imx_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _SATA_BASE_ADDR, \
.irq = soc ## _INT_SATA, \
}
#ifdef CONFIG_SOC_IMX53
const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
#endif
enum {
HOST_CAP = 0x00,
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
HOST_PORTS_IMPL = 0x0c,
HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
};
static struct clk *sata_clk, *sata_ref_clk;
/* AHCI module Initialization, if return 0, initialization is successful. */
static int imx_sata_init(struct device *dev, void __iomem *addr)
{
u32 tmpdata;
int ret = 0;
struct clk *clk;
sata_clk = clk_get(dev, "ahci");
if (IS_ERR(sata_clk)) {
dev_err(dev, "no sata clock.\n");
return PTR_ERR(sata_clk);
}
ret = clk_prepare_enable(sata_clk);
if (ret) {
dev_err(dev, "can't prepare/enable sata clock.\n");
goto put_sata_clk;
}
/* Get the AHCI SATA PHY CLK */
sata_ref_clk = clk_get(dev, "ahci_phy");
if (IS_ERR(sata_ref_clk)) {
dev_err(dev, "no sata ref clock.\n");
ret = PTR_ERR(sata_ref_clk);
goto release_sata_clk;
}
ret = clk_prepare_enable(sata_ref_clk);
if (ret) {
dev_err(dev, "can't prepare/enable sata ref clock.\n");
goto put_sata_ref_clk;
}
/* Get the AHB clock rate, and configure the TIMER1MS reg later */
clk = clk_get(dev, "ahci_dma");
if (IS_ERR(clk)) {
dev_err(dev, "no dma clock.\n");
ret = PTR_ERR(clk);
goto release_sata_ref_clk;
}
tmpdata = clk_get_rate(clk) / 1000;
clk_put(clk);
writel(tmpdata, addr + HOST_TIMER1MS);
tmpdata = readl(addr + HOST_CAP);
if (!(tmpdata & HOST_CAP_SSS)) {
tmpdata |= HOST_CAP_SSS;
writel(tmpdata, addr + HOST_CAP);
}
if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
addr + HOST_PORTS_IMPL);
return 0;
release_sata_ref_clk:
clk_disable_unprepare(sata_ref_clk);
put_sata_ref_clk:
clk_put(sata_ref_clk);
release_sata_clk:
clk_disable_unprepare(sata_clk);
put_sata_clk:
clk_put(sata_clk);
return ret;
}
static void imx_sata_exit(struct device *dev)
{
clk_disable_unprepare(sata_ref_clk);
clk_put(sata_ref_clk);
clk_disable_unprepare(sata_clk);
clk_put(sata_clk);
}
struct platform_device *__init imx_add_ahci_imx(
const struct imx_ahci_imx_data *data,
const struct ahci_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
struct platform_device *__init imx53_add_ahci_imx(void)
{
struct ahci_platform_data pdata = {
.init = imx_sata_init,
.exit = imx_sata_exit,
};
return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
}

23
arch/arm/mach-imx/gpc.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
@ -68,6 +68,27 @@ static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
return 0;
}
void imx_gpc_mask_all(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
for (i = 0; i < IMR_NUM; i++) {
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
writel_relaxed(~0, reg_imr1 + i * 4);
}
}
void imx_gpc_restore_all(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
}
static void imx_gpc_irq_unmask(struct irq_data *d)
{
void __iomem *reg;

1
arch/arm/mach-imx/hardware.h
Просмотреть файл

@ -102,7 +102,6 @@
#include "mxc.h"
#include "mx6q.h"
#include "mx51.h"
#include "mx53.h"
#include "mx3x.h"

12
arch/arm/mach-imx/hotplug.c
Просмотреть файл

@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void)
void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
/*
* We use the cpu jumping argument register to sync with
* imx_cpu_kill() which is running on cpu0 and waiting for
* the register being cleared to kill the cpu.
*/
imx_set_cpu_arg(cpu, ~0);
cpu_do_idle();
}
int imx_cpu_kill(unsigned int cpu)
{
unsigned long timeout = jiffies + msecs_to_jiffies(50);
while (imx_get_cpu_arg(cpu) == 0)
if (time_after(jiffies, timeout))
return 0;
imx_enable_cpu(cpu, false);
imx_set_cpu_arg(cpu, 0);
return 1;
}

5
arch/arm/mach-imx/mach-cpuimx51sd.c
Просмотреть файл

@ -33,7 +33,6 @@
#include "common.h"
#include "devices-imx51.h"
#include "cpu_op-mx51.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx51.h"
@ -285,10 +284,6 @@ static void __init eukrea_cpuimx51sd_init(void)
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
ARRAY_SIZE(eukrea_cpuimx51sd_pads));
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
imx51_add_imx2_wdt(0);

72
arch/arm/mach-imx/mach-imx6q.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
@ -38,38 +38,32 @@
#include "cpuidle.h"
#include "hardware.h"
#define IMX6Q_ANALOG_DIGPROG 0x260
static u32 chip_revision;
static int imx6q_revision(void)
int imx6q_revision(void)
{
struct device_node *np;
void __iomem *base;
static u32 rev;
return chip_revision;
}
if (!rev) {
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
if (!np)
return IMX_CHIP_REVISION_UNKNOWN;
base = of_iomap(np, 0);
if (!base) {
of_node_put(np);
return IMX_CHIP_REVISION_UNKNOWN;
}
rev = readl_relaxed(base + IMX6Q_ANALOG_DIGPROG);
iounmap(base);
of_node_put(np);
}
static void __init imx6q_init_revision(void)
{
u32 rev = imx_anatop_get_digprog();
switch (rev & 0xff) {
case 0:
return IMX_CHIP_REVISION_1_0;
chip_revision = IMX_CHIP_REVISION_1_0;
break;
case 1:
return IMX_CHIP_REVISION_1_1;
chip_revision = IMX_CHIP_REVISION_1_1;
break;
case 2:
return IMX_CHIP_REVISION_1_2;
chip_revision = IMX_CHIP_REVISION_1_2;
break;
default:
return IMX_CHIP_REVISION_UNKNOWN;
chip_revision = IMX_CHIP_REVISION_UNKNOWN;
}
mxc_set_cpu_type(rev >> 16 & 0xff);
}
void imx6q_restart(char mode, const char *cmd)
@ -164,29 +158,7 @@ static void __init imx6q_1588_init(void)
}
static void __init imx6q_usb_init(void)
{
struct regmap *anatop;
#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0
#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210
#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000
#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000
anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
if (!IS_ERR(anatop)) {
/*
* The external charger detector needs to be disabled,
* or the signal at DP will be poor
*/
regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT,
BM_ANADIG_USB_CHRG_DETECT_EN_B
| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT,
BM_ANADIG_USB_CHRG_DETECT_EN_B |
BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
} else {
pr_warn("failed to find fsl,imx6q-anatop regmap\n");
}
imx_anatop_usb_chrg_detect_disable();
}
static void __init imx6q_init_machine(void)
@ -196,6 +168,7 @@ static void __init imx6q_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx_anatop_init();
imx6q_pm_init();
imx6q_usb_init();
imx6q_1588_init();
@ -282,6 +255,7 @@ static void __init imx6q_map_io(void)
static void __init imx6q_init_irq(void)
{
imx6q_init_revision();
l2x0_of_init(0, ~0UL);
imx_src_init();
imx_gpc_init();
@ -292,15 +266,17 @@ static void __init imx6q_timer_init(void)
{
mx6q_clocks_init();
clocksource_of_init();
imx_print_silicon_rev("i.MX6Q", imx6q_revision());
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
imx6q_revision());
}
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6dl",
"fsl,imx6q",
NULL,
};
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
.smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,

4
arch/arm/mach-imx/mach-mx51_babbage.c
Просмотреть файл

@ -27,7 +27,6 @@
#include "common.h"
#include "devices-imx51.h"
#include "cpu_op-mx51.h"
#include "hardware.h"
#include "iomux-mx51.h"
@ -371,9 +370,6 @@ static void __init mx51_babbage_init(void)
imx51_soc_init();
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
imx51_babbage_common_init();
imx51_add_imx_uart(0, &uart_pdata);

2
arch/arm/mach-imx/mm-imx1.c
Просмотреть файл

@ -51,6 +51,8 @@ void __init mx1_init_irq(void)
void __init imx1_soc_init(void)
{
mxc_device_init();
mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
MX1_GPIO_INT_PORTA, 0);
mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,

31
arch/arm/mach-imx/mx6q.h
Просмотреть файл

@ -1,31 +0,0 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef __MACH_MX6Q_H__
#define __MACH_MX6Q_H__
#define MX6Q_IO_P2V(x) IMX_IO_P2V(x)
#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x))
/*
* The following are the blocks that need to be statically mapped.
* For other blocks, the base address really should be retrieved from
* device tree.
*/
#define MX6Q_SCU_BASE_ADDR 0x00a00000
#define MX6Q_SCU_SIZE 0x1000
#define MX6Q_CCM_BASE_ADDR 0x020c4000
#define MX6Q_CCM_SIZE 0x4000
#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
#define MX6Q_ANATOP_SIZE 0x1000
#endif /* __MACH_MX6Q_H__ */

11
arch/arm/mach-imx/mxc.h
Просмотреть файл

@ -34,6 +34,8 @@
#define MXC_CPU_MX35 35
#define MXC_CPU_MX51 51
#define MXC_CPU_MX53 53
#define MXC_CPU_IMX6DL 0x61
#define MXC_CPU_IMX6Q 0x63
#define IMX_CHIP_REVISION_1_0 0x10
#define IMX_CHIP_REVISION_1_1 0x11
@ -150,6 +152,15 @@ extern unsigned int __mxc_cpu_type;
#endif
#ifndef __ASSEMBLY__
static inline bool cpu_is_imx6dl(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6DL;
}
static inline bool cpu_is_imx6q(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6Q;
}
struct cpu_op {
u32 cpu_rate;

4
arch/arm/mach-imx/platsmp.c
Просмотреть файл

@ -68,8 +68,8 @@ static void __init imx_smp_init_cpus(void)
ncores = scu_get_core_count(scu_base);
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
for (i = ncores; i < NR_CPUS; i++)
set_cpu_possible(i, false);
}
void imx_smp_prepare(void)

4
arch/arm/mach-imx/pm-imx6q.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
@ -34,10 +34,12 @@ static int imx6q_pm_enter(suspend_state_t state)
case PM_SUSPEND_MEM:
imx6q_set_lpm(STOP_POWER_OFF);
imx_gpc_pre_suspend();
imx_anatop_pre_suspend();
imx_set_cpu_jump(0, v7_cpu_resume);
/* Zzz ... */
cpu_suspend(0, imx6q_suspend_finish);
imx_smp_prepare();
imx_anatop_post_resume();
imx_gpc_post_resume();
imx6q_set_lpm(WAIT_CLOCKED);
break;

77
arch/arm/mach-imx/src.c
Просмотреть файл

@ -14,16 +14,72 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/reset-controller.h>
#include <linux/smp.h>
#include <asm/smp_plat.h>
#define SRC_SCR 0x000
#define SRC_GPR1 0x020
#define BP_SRC_SCR_WARM_RESET_ENABLE 0
#define BP_SRC_SCR_SW_GPU_RST 1
#define BP_SRC_SCR_SW_VPU_RST 2
#define BP_SRC_SCR_SW_IPU1_RST 3
#define BP_SRC_SCR_SW_OPEN_VG_RST 4
#define BP_SRC_SCR_SW_IPU2_RST 12
#define BP_SRC_SCR_CORE1_RST 14
#define BP_SRC_SCR_CORE1_ENABLE 22
static void __iomem *src_base;
static DEFINE_SPINLOCK(scr_lock);
static const int sw_reset_bits[5] = {
BP_SRC_SCR_SW_GPU_RST,
BP_SRC_SCR_SW_VPU_RST,
BP_SRC_SCR_SW_IPU1_RST,
BP_SRC_SCR_SW_OPEN_VG_RST,
BP_SRC_SCR_SW_IPU2_RST
};
static int imx_src_reset_module(struct reset_controller_dev *rcdev,
unsigned long sw_reset_idx)
{
unsigned long timeout;
unsigned long flags;
int bit;
u32 val;
if (!src_base)
return -ENODEV;
if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
return -EINVAL;
bit = 1 << sw_reset_bits[sw_reset_idx];
spin_lock_irqsave(&scr_lock, flags);
val = readl_relaxed(src_base + SRC_SCR);
val |= bit;
writel_relaxed(val, src_base + SRC_SCR);
spin_unlock_irqrestore(&scr_lock, flags);
timeout = jiffies + msecs_to_jiffies(1000);
while (readl(src_base + SRC_SCR) & bit) {
if (time_after(jiffies, timeout))
return -ETIME;
cpu_relax();
}
return 0;
}
static struct reset_control_ops imx_src_ops = {
.reset = imx_src_reset_module,
};
static struct reset_controller_dev imx_reset_controller = {
.ops = &imx_src_ops,
.nr_resets = ARRAY_SIZE(sw_reset_bits),
};
void imx_enable_cpu(int cpu, bool enable)
{
@ -31,9 +87,11 @@ void imx_enable_cpu(int cpu, bool enable)
cpu = cpu_logical_map(cpu);
mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
writel_relaxed(val, src_base + SRC_SCR);
spin_unlock(&scr_lock);
}
void imx_set_cpu_jump(int cpu, void *jump_addr)
@ -43,14 +101,28 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
src_base + SRC_GPR1 + cpu * 8);
}
u32 imx_get_cpu_arg(int cpu)
{
cpu = cpu_logical_map(cpu);
return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
}
void imx_set_cpu_arg(int cpu, u32 arg)
{
cpu = cpu_logical_map(cpu);
writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
}
void imx_src_prepare_restart(void)
{
u32 val;
/* clear enable bits of secondary cores */
spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
writel_relaxed(val, src_base + SRC_SCR);
spin_unlock(&scr_lock);
/* clear persistent entry register of primary core */
writel_relaxed(0, src_base + SRC_GPR1);
@ -65,11 +137,16 @@ void __init imx_src_init(void)
src_base = of_iomap(np, 0);
WARN_ON(!src_base);
imx_reset_controller.of_node = np;
reset_controller_register(&imx_reset_controller);
/*
* force warm reset sources to generate cold reset
* for a more reliable restart
*/
spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE);
writel_relaxed(val, src_base + SRC_SCR);
spin_unlock(&scr_lock);
}

2
arch/arm/mach-kirkwood/guruplug-setup.c
Просмотреть файл

@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = {
static struct mvsdio_platform_data guruplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
.gpio_card_detect = -1,
.gpio_write_protect = -1,
};
static struct gpio_led guruplug_led_pins[] = {

1
arch/arm/mach-kirkwood/openrd-setup.c
Просмотреть файл

@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = {
static struct mvsdio_platform_data openrd_mvsdio_data = {
.gpio_card_detect = 29, /* MPP29 used as SD card detect */
.gpio_write_protect = -1,
};
static unsigned int openrd_mpp_config[] __initdata = {

1
arch/arm/mach-kirkwood/rd88f6281-setup.c
Просмотреть файл

@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
.gpio_card_detect = 28,
.gpio_write_protect = -1,
};
static unsigned int rd88f6281_mpp_config[] __initdata = {

5
arch/arm/mach-msm/timer.c
Просмотреть файл

@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles,
{
u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
writel_relaxed(0, event_base + TIMER_CLEAR);
ctrl &= ~TIMER_ENABLE_EN;
writel_relaxed(ctrl, event_base + TIMER_ENABLE);
writel_relaxed(ctrl, event_base + TIMER_CLEAR);
writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
return 0;

8
arch/arm/mach-mvebu/irq-armada-370-xp.c
Просмотреть файл

@ -44,6 +44,8 @@
#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28)
#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5)
#define ACTIVE_DOORBELLS (8)
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@ -62,7 +64,7 @@ static void armada_370_xp_irq_mask(struct irq_data *d)
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
else
@ -79,7 +81,7 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_SET_ENABLE_OFFS);
else
@ -147,7 +149,7 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
irq_set_status_flags(virq, IRQ_LEVEL);
if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
irq_set_percpu_devid(virq);
irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
handle_percpu_devid_irq);

12
arch/arm/mach-omap1/clock_data.c
Просмотреть файл

@ -538,15 +538,6 @@ static struct clk usb_hhc_ck16xx = {
};
static struct clk usb_dc_ck = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = USB_REQ_EN_SHIFT,
};
static struct clk usb_dc_ck7xx = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = {
CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX),
CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),

20
arch/arm/mach-omap2/cclock44xx_data.c
Просмотреть файл

@ -52,6 +52,13 @@
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
/*
* OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
* "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
* locked frequency for the USB DPLL is 960MHz.
*/
#define OMAP4_DPLL_USB_DEFFREQ 960000000
/* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X),
CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X),
CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X),
CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X),
CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X),
@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void)
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
/*
* Lock USB DPLL on OMAP4 devices so that the L3INIT power
* domain can transition to retention state when not in use.
*/
rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
if (rc)
pr_err("%s: failed to configure USB DPLL!\n", __func__);
return 0;
}

3
arch/arm/mach-omap2/common.h
Просмотреть файл

@ -293,5 +293,8 @@ extern void omap_reserve(void);
struct omap_hwmod;
extern int omap_dss_reset(struct omap_hwmod *);
/* SoC specific clock initializer */
extern int (*omap_clk_init)(void);
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

18
arch/arm/mach-omap2/io.c
Просмотреть файл

@ -54,6 +54,12 @@
#include "prm3xxx.h"
#include "prm44xx.h"
/*
* omap_clk_init: points to a function that does the SoC-specific
* clock initializations
*/
int (*omap_clk_init)(void);
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
@ -397,7 +403,7 @@ void __init omap2420_init_early(void)
omap242x_clockdomains_init();
omap2420_hwmod_init();
omap_hwmod_init_postsetup();
omap2420_clk_init();
omap_clk_init = omap2420_clk_init;
}
void __init omap2420_init_late(void)
@ -427,7 +433,7 @@ void __init omap2430_init_early(void)
omap243x_clockdomains_init();
omap2430_hwmod_init();
omap_hwmod_init_postsetup();
omap2430_clk_init();
omap_clk_init = omap2430_clk_init;
}
void __init omap2430_init_late(void)
@ -462,7 +468,7 @@ void __init omap3_init_early(void)
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
omap3xxx_clk_init();
omap_clk_init = omap3xxx_clk_init;
}
void __init omap3430_init_early(void)
@ -500,7 +506,7 @@ void __init ti81xx_init_early(void)
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
omap3xxx_clk_init();
omap_clk_init = omap3xxx_clk_init;
}
void __init omap3_init_late(void)
@ -568,7 +574,7 @@ void __init am33xx_init_early(void)
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_hwmod_init_postsetup();
am33xx_clk_init();
omap_clk_init = am33xx_clk_init;
}
#endif
@ -593,7 +599,7 @@ void __init omap4430_init_early(void)
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
omap_hwmod_init_postsetup();
omap4xxx_clk_init();
omap_clk_init = omap4xxx_clk_init;
}
void __init omap4430_init_late(void)

7
arch/arm/mach-omap2/omap_hwmod.c
Просмотреть файл

@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
}
if (sf & SYSC_HAS_MIDLEMODE) {
if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
if (oh->flags & HWMOD_FORCE_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_NO;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
}
if (sf & SYSC_HAS_MIDLEMODE) {
if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
(oh->flags & HWMOD_FORCE_MSTANDBY)) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)

9
arch/arm/mach-omap2/omap_hwmod.h
Просмотреть файл

@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm {
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
* HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
* of standby, rather than relying on module smart-standby
* HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
* out of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* XXX Should be HWMOD_SETUP_NO_RESET
@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm {
* correctly, or this is being abused to deal with some PM latency
* issues -- but we're currently suffering from a shortage of
* folks who are able to track these issues down properly.
* HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
* is kept in force-standby mode. Failing to do so causes PM problems
* with musb on OMAP3630 at least. Note that musb has a dedicated register
* to control MSTANDBY signal when MIDLEMODE is set to force-standby.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_16BIT_REG (1 << 8)
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
#define HWMOD_FORCE_MSTANDBY (1 << 11)
/*
* omap_hwmod._int_flags definitions

7
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
Просмотреть файл

@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
* Erratum ID: i479 idle_req / idle_ack mechanism potentially
* broken when autoidle is enabled
* workaround is to disable the autoidle bit at module level.
*
* Enabling the device in any other MIDLEMODE setting but force-idle
* causes core_pwrdm not enter idle states at least on OMAP3630.
* Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
* signal when MIDLEMODE is set to force-idle.
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
| HWMOD_FORCE_MSTANDBY,
};
/* usb_otg_hs */

6
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
Просмотреть файл

@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
{ }
};
static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
{ .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
};
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
},
},
.dev_attr = ocp2scp_dev_attr,
.opt_clks = ocp2scp_usb_phy_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
};
/*

4
arch/arm/mach-omap2/timer.c
Просмотреть файл

@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void)
clksrc_nr, clksrc_src) \
void __init omap##name##_gptimer_timer_init(void) \
{ \
if (omap_clk_init) \
omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \
@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void) \
clksrc_nr, clksrc_src) \
void __init omap##name##_sync32k_timer_init(void) \
{ \
if (omap_clk_init) \
omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
/* Enable the use of clocksource="gp_timer" kernel parameter */ \

1
arch/arm/mach-ux500/board-mop500-sdi.c
Просмотреть файл

@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
#endif
struct mmci_platform_data mop500_sdi0_data = {
.ios_handler = mop500_sdi0_ios_handler,
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA |

12
arch/arm/mach-ux500/board-mop500.c
Просмотреть файл

@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev)
regulator_put(prox_regulator);
}
void mop500_snowball_ethernet_clock_enable(void)
{
struct clk *clk;
clk = clk_get_sys("fsmc", NULL);
if (!IS_ERR(clk))
clk_prepare_enable(clk);
}
static struct cryp_platform_data u8500_cryp1_platform_data = {
.mem_to_engine = {
.dir = STEDMA40_MEM_TO_PERIPH,
@ -683,6 +693,8 @@ static void __init snowball_init_machine(void)
mop500_audio_init(parent);
mop500_uart_init(parent);
mop500_snowball_ethernet_clock_enable();
/* This board has full regulator constraints */
regulator_has_full_constraints();
}

1
arch/arm/mach-ux500/board-mop500.h
Просмотреть файл

@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void);
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
void mop500_audio_init(struct device *parent);
void mop500_snowball_ethernet_clock_enable(void);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,

5
arch/arm/mach-ux500/cpu-db8500.c
Просмотреть файл

@ -312,9 +312,10 @@ static void __init u8500_init_machine(void)
/* Pinmaps must be in place before devices register */
if (of_machine_is_compatible("st-ericsson,mop500"))
mop500_pinmaps_init();
else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
snowball_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
mop500_snowball_ethernet_clock_enable();
} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
hrefv60_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
/* TODO: Add pinmaps for ccu9540 board. */

11
arch/arm/mm/cache-l2x0.c
Просмотреть файл

@ -299,7 +299,7 @@ static void l2x0_unlock(u32 cache_id)
int lockregs;
int i;
switch (cache_id) {
switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
case L2X0_CACHE_ID_PART_L310:
lockregs = 8;
break;
@ -333,15 +333,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
if (cache_id_part_number_from_dt)
cache_id = cache_id_part_number_from_dt;
else
cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
& L2X0_CACHE_ID_PART_MASK;
cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
aux &= aux_mask;
aux |= aux_val;
/* Determine the number of ways */
switch (cache_id) {
switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
case L2X0_CACHE_ID_PART_L310:
if (aux & (1 << 16))
ways = 16;
@ -725,7 +724,6 @@ static const struct l2x0_of_data pl310_data = {
.flush_all = l2x0_flush_all,
.inv_all = l2x0_inv_all,
.disable = l2x0_disable,
.set_debug = pl310_set_debug,
},
};
@ -814,9 +812,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
data->save();
of_init = true;
l2x0_init(l2x0_base, aux_val, aux_mask);
memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
l2x0_init(l2x0_base, aux_val, aux_mask);
return 0;
}

3
arch/arm/mm/context.c
Просмотреть файл

@ -48,7 +48,7 @@ static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
static DEFINE_PER_CPU(atomic64_t, active_asids);
DEFINE_PER_CPU(atomic64_t, active_asids);
static DEFINE_PER_CPU(u64, reserved_asids);
static cpumask_t tlb_flush_pending;
@ -215,6 +215,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
local_flush_bp_all();
local_flush_tlb_all();
dummy_flush_tlb_a15_erratum();
}
atomic64_set(&per_cpu(active_asids, cpu), asid);

75
arch/arm/mm/mmu.c
Просмотреть файл

@ -598,39 +598,60 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
} while (pte++, addr += PAGE_SIZE, addr != end);
}
static void __init alloc_init_section(pud_t *pud, unsigned long addr,
static void __init map_init_section(pmd_t *pmd, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type)
{
#ifndef CONFIG_ARM_LPAE
/*
* In classic MMU format, puds and pmds are folded in to
* the pgds. pmd_offset gives the PGD entry. PGDs refer to a
* group of L1 entries making up one logical pointer to
* an L2 table (2MB), where as PMDs refer to the individual
* L1 entries (1MB). Hence increment to get the correct
* offset for odd 1MB sections.
* (See arch/arm/include/asm/pgtable-2level.h)
*/
if (addr & SECTION_SIZE)
pmd++;
#endif
do {
*pmd = __pmd(phys | type->prot_sect);
phys += SECTION_SIZE;
} while (pmd++, addr += SECTION_SIZE, addr != end);
flush_pmd_entry(pmd);
}
static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type)
{
pmd_t *pmd = pmd_offset(pud, addr);
unsigned long next;
/*
* Try a section mapping - end, addr and phys must all be aligned
* to a section boundary. Note that PMDs refer to the individual
* L1 entries, whereas PGDs refer to a group of L1 entries making
* up one logical pointer to an L2 table.
*/
if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
pmd_t *p = pmd;
#ifndef CONFIG_ARM_LPAE
if (addr & SECTION_SIZE)
pmd++;
#endif
do {
*pmd = __pmd(phys | type->prot_sect);
phys += SECTION_SIZE;
} while (pmd++, addr += SECTION_SIZE, addr != end);
flush_pmd_entry(p);
} else {
do {
/*
* No need to loop; pte's aren't interested in the
* individual L1 entries.
* With LPAE, we must loop over to map
* all the pmds for the given range.
*/
alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
}
next = pmd_addr_end(addr, end);
/*
* Try a section mapping - addr, next and phys must all be
* aligned to a section boundary.
*/
if (type->prot_sect &&
((addr | next | phys) & ~SECTION_MASK) == 0) {
map_init_section(pmd, addr, next, phys, type);
} else {
alloc_init_pte(pmd, addr, next,
__phys_to_pfn(phys), type);
}
phys += next - addr;
} while (pmd++, addr = next, addr != end);
}
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
@ -641,7 +662,7 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
do {
next = pud_addr_end(addr, end);
alloc_init_section(pud, addr, next, phys, type);
alloc_init_pmd(pud, addr, next, phys, type);
phys += next - addr;
} while (pud++, addr = next, addr != end);
}

19
arch/arm/mm/proc-v7.S
Просмотреть файл

@ -420,7 +420,7 @@ __v7_pj4b_proc_info:
__v7_ca7mp_proc_info:
.long 0x410fc070
.long 0xff0ffff0
__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
__v7_proc __v7_ca7mp_setup
.size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
/*
@ -430,9 +430,24 @@ __v7_ca7mp_proc_info:
__v7_ca15mp_proc_info:
.long 0x410fc0f0
.long 0xff0ffff0
__v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
__v7_proc __v7_ca15mp_setup
.size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
/*
* Qualcomm Inc. Krait processors.
*/
.type __krait_proc_info, #object
__krait_proc_info:
.long 0x510f0400 @ Required ID value
.long 0xff0ffc00 @ Mask for ID
/*
* Some Krait processors don't indicate support for SDIV and UDIV
* instructions in the ARM instruction set, even though they actually
* do support them.
*/
__v7_proc __v7_setup, hwcaps = HWCAP_IDIV
.size __krait_proc_info, . - __krait_proc_info
/*
* Match any ARMv7 processor core.
*/

7
arch/mips/Kconfig
Просмотреть файл

@ -18,7 +18,7 @@ config MIPS
select HAVE_KRETPROBES
select HAVE_DEBUG_KMEMLEAK
select ARCH_BINFMT_ELF_RANDOMIZE_PIE
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
select RTC_LIB if !MACH_LOONGSON
select GENERIC_ATOMIC64 if !64BIT
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@ -657,7 +657,7 @@ config SNI_RM
bool "SNI RM200/300/400"
select FW_ARC if CPU_LITTLE_ENDIAN
select FW_ARC32 if CPU_LITTLE_ENDIAN
select SNIPROM if CPU_BIG_ENDIAN
select FW_SNIPROM if CPU_BIG_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select CEVT_R4K
@ -1144,7 +1144,7 @@ config DEFAULT_SGI_PARTITION
config FW_ARC32
bool
config SNIPROM
config FW_SNIPROM
bool
config BOOT_ELF32
@ -1493,7 +1493,6 @@ config CPU_XLP
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_HAS_LLSC
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_HAS_PREFETCH

5
arch/mips/bcm63xx/boards/board_bcm963xx.c
Просмотреть файл

@ -745,10 +745,7 @@ void __init board_prom_init(void)
strcpy(cfe_version, "unknown");
printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
printk(KERN_ERR PFX "invalid nvram checksum\n");
return;
}
bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
board_name = bcm63xx_nvram_get_name();
/* find board by name */

7
arch/mips/bcm63xx/nvram.c
Просмотреть файл

@ -38,7 +38,7 @@ struct bcm963xx_nvram {
static struct bcm963xx_nvram nvram;
static int mac_addr_used;
int __init bcm63xx_nvram_init(void *addr)
void __init bcm63xx_nvram_init(void *addr)
{
unsigned int check_len;
u32 crc, expected_crc;
@ -60,9 +60,8 @@ int __init bcm63xx_nvram_init(void *addr)
crc = crc32_le(~0, (u8 *)&nvram, check_len);
if (crc != expected_crc)
return -EINVAL;
return 0;
pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
expected_crc, crc);
}
u8 *bcm63xx_nvram_get_name(void)

2
arch/mips/bcm63xx/setup.c
Просмотреть файл

@ -157,4 +157,4 @@ int __init bcm63xx_register_devices(void)
return board_register_devices();
}
device_initcall(bcm63xx_register_devices);
arch_initcall(bcm63xx_register_devices);

5
arch/mips/cavium-octeon/setup.c
Просмотреть файл

@ -174,7 +174,10 @@ static int octeon_kexec_prepare(struct kimage *image)
static void octeon_generic_shutdown(void)
{
int cpu, i;
int i;
#ifdef CONFIG_SMP
int cpu;
#endif
struct cvmx_bootmem_desc *bootmem_desc;
void *named_block_array_ptr;

4
arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
Просмотреть файл

@ -9,10 +9,8 @@
*
* Initialized the local nvram copy from the target address and checks
* its checksum.
*
* Returns 0 on success.
*/
int __init bcm63xx_nvram_init(void *nvram);
void bcm63xx_nvram_init(void *nvram);
/**
* bcm63xx_nvram_get_name() - returns the board name according to nvram

4
arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
Просмотреть файл

@ -28,11 +28,7 @@
/* #define cpu_has_prefetch ? */
#define cpu_has_mcheck 1
/* #define cpu_has_ejtag ? */
#ifdef CONFIG_CPU_HAS_LLSC
#define cpu_has_llsc 1
#else
#define cpu_has_llsc 0
#endif
/* #define cpu_has_vtag_icache ? */
/* #define cpu_has_dc_aliases ? */
/* #define cpu_has_ic_fills_f_dc ? */

203
arch/mips/include/asm/mipsregs.h
Просмотреть файл

@ -1166,7 +1166,10 @@ do { \
unsigned int __dspctl; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set dsp \n" \
" rddsp %0, %x1 \n" \
" .set pop \n" \
: "=r" (__dspctl) \
: "i" (mask)); \
__dspctl; \
@ -1175,30 +1178,198 @@ do { \
#define wrdsp(val, mask) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set dsp \n" \
" wrdsp %0, %x1 \n" \
" .set pop \n" \
: \
: "r" (val), "i" (mask)); \
} while (0)
#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
#define mflo0() \
({ \
long mflo0; \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mflo %0, $ac0 \n" \
" .set pop \n" \
: "=r" (mflo0)); \
mflo0; \
})
#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
#define mflo1() \
({ \
long mflo1; \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mflo %0, $ac1 \n" \
" .set pop \n" \
: "=r" (mflo1)); \
mflo1; \
})
#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
#define mflo2() \
({ \
long mflo2; \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mflo %0, $ac2 \n" \
" .set pop \n" \
: "=r" (mflo2)); \
mflo2; \
})
#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
#define mflo3() \
({ \
long mflo3; \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mflo %0, $ac3 \n" \
" .set pop \n" \
: "=r" (mflo3)); \
mflo3; \
})
#define mfhi0() \
({ \
long mfhi0; \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mfhi %0, $ac0 \n" \
" .set pop \n" \
: "=r" (mfhi0)); \
mfhi0; \
})
#define mfhi1() \
({ \
long mfhi1; \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mfhi %0, $ac1 \n" \
" .set pop \n" \
: "=r" (mfhi1)); \
mfhi1; \
})
#define mfhi2() \
({ \
long mfhi2; \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mfhi %0, $ac2 \n" \
" .set pop \n" \
: "=r" (mfhi2)); \
mfhi2; \
})
#define mfhi3() \
({ \
long mfhi3; \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mfhi %0, $ac3 \n" \
" .set pop \n" \
: "=r" (mfhi3)); \
mfhi3; \
})
#define mtlo0(x) \
({ \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mtlo %0, $ac0 \n" \
" .set pop \n" \
: \
: "r" (x)); \
})
#define mtlo1(x) \
({ \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mtlo %0, $ac1 \n" \
" .set pop \n" \
: \
: "r" (x)); \
})
#define mtlo2(x) \
({ \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mtlo %0, $ac2 \n" \
" .set pop \n" \
: \
: "r" (x)); \
})
#define mtlo3(x) \
({ \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mtlo %0, $ac3 \n" \
" .set pop \n" \
: \
: "r" (x)); \
})
#define mthi0(x) \
({ \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mthi %0, $ac0 \n" \
" .set pop \n" \
: \
: "r" (x)); \
})
#define mthi1(x) \
({ \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mthi %0, $ac1 \n" \
" .set pop \n" \
: \
: "r" (x)); \
})
#define mthi2(x) \
({ \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mthi %0, $ac2 \n" \
" .set pop \n" \
: \
: "r" (x)); \
})
#define mthi3(x) \
({ \
__asm__( \
" .set push \n" \
" .set dsp \n" \
" mthi %0, $ac3 \n" \
" .set pop \n" \
: \
: "r" (x)); \
})
#else

2
arch/mips/include/asm/signal.h
Просмотреть файл

@ -21,6 +21,6 @@
#include <asm/sigcontext.h>
#include <asm/siginfo.h>
#define __ARCH_HAS_ODD_SIGACTION
#define __ARCH_HAS_IRIX_SIGACTION
#endif /* _ASM_SIGNAL_H */

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше