ARM: dts: imx: Add Advantech BA-16 Qseven module
Add support for Advantech BA-16 module based on iMX6D processor
Basic information about the module:
- Module manufacturer: Advantech
- CPU: Freescale ARM Cortex-A9 i.MX6
- SPECS:
Up to 2GB Onboard DDR3 Memory;
Up to 16GB Onboard eMMC NAND Flash
Supports OpenGL ES 2.0 and OpenVG 1.1
HDMI, 24-bit LVDS
1x UART, 2x I2C, 8x GPIO,
4x Host USB 2.0 port, 1x USB OTG port,
1x micro SD (SDHC),1x SDIO, 1x SATA II,
1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2
- Website: http://goo.gl/JED98U
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Justin Waters <justin.waters@timesys.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Justin Waters
Shawn Guo
Родитель
1a2419c0b3
Коммит
56c27310c1
|
|
@ -0,0 +1,632 @@
|
|||
/*
|
||||
* Support for imx6 based Advantech DMS-BA16 Qseven module
|
||||
*
|
||||
* Copyright 2015 Timesys Corporation.
|
||||
* Copyright 2015 General Electric Company
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "imx6q.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
memory {
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
|
||||
backlight_lvds: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_display>;
|
||||
pwms = <&pwm1 0 5000000>;
|
||||
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100 101 102 103 104 105 106 107 108 109
|
||||
110 111 112 113 114 115 116 117 118 119
|
||||
120 121 122 123 124 125 126 127 128 129
|
||||
130 131 132 133 134 135 136 137 138 139
|
||||
140 141 142 143 144 145 146 147 148 149
|
||||
150 151 152 153 154 155 156 157 158 159
|
||||
160 161 162 163 164 165 166 167 168 169
|
||||
170 171 172 173 174 175 176 177 178 179
|
||||
180 181 182 183 184 185 186 187 188 189
|
||||
190 191 192 193 194 195 196 197 198 199
|
||||
200 201 202 203 204 205 206 207 208 209
|
||||
210 211 212 213 214 215 216 217 218 219
|
||||
220 221 222 223 224 225 226 227 228 229
|
||||
230 231 232 233 234 235 236 237 238 239
|
||||
240 241 242 243 244 245 246 247 248 249
|
||||
250 251 252 253 254 255>;
|
||||
default-brightness-level = <255>;
|
||||
enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1P8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_lvds: regulator-lvds {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lvds_ppen";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_usb_h1_vbus: regulator-usbh1vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_h1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator-usbotgvbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ecspi1 {
|
||||
fsl,spi-num-chipselects = <1>;
|
||||
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi1>;
|
||||
status = "okay";
|
||||
|
||||
flash: n25q032@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <20000000>;
|
||||
reg = <0>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0x0 0xc0000>;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "env";
|
||||
reg = <0xc0000 0x10000>;
|
||||
};
|
||||
|
||||
partition@d0000 {
|
||||
label = "spare";
|
||||
reg = <0xd0000 0x130000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
phy-mode = "rgmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio7>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
onkey {
|
||||
compatible = "dlg,da9063-onkey";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_bcore1: bcore1 {
|
||||
regulator-min-microvolt = <1420000>;
|
||||
regulator-max-microvolt = <1420000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_bcore2: bcore2 {
|
||||
regulator-min-microvolt = <1420000>;
|
||||
regulator-max-microvolt = <1420000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_bpro: bpro {
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_bmem: bmem {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_bio: bio {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_bperi: bperi {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_ldo1: ldo1 {
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1860000>;
|
||||
};
|
||||
|
||||
vdd_ldo2: ldo2 {
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1860000>;
|
||||
};
|
||||
|
||||
vdd_ldo3: ldo3 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <3440000>;
|
||||
};
|
||||
|
||||
vdd_ldo4: ldo4 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <3440000>;
|
||||
};
|
||||
|
||||
vdd_ldo5: ldo5 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
};
|
||||
|
||||
vdd_ldo6: ldo6 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
};
|
||||
|
||||
vdd_ldo7: ldo7 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
};
|
||||
|
||||
vdd_ldo8: ldo8 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
};
|
||||
|
||||
vdd_ldo9: ldo9 {
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
};
|
||||
|
||||
vdd_ldo10: ldo10 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
};
|
||||
|
||||
vdd_ldo11: ldo11 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rtc@32 {
|
||||
compatible = "epson,rx8010";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rtc>;
|
||||
reg = <0x32>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pcie>;
|
||||
reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3>;
|
||||
fsl,uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbhub>;
|
||||
vbus-supply = <®_usb_h1_vbus>;
|
||||
reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_usb_otg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
no-1-8-v;
|
||||
keep-power-in-suspend;
|
||||
wakeup-source;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
|
||||
bus-width = <8>;
|
||||
vmmc-supply = <&vdd_bperi>;
|
||||
vqmmc-supply = <&vdd_bio>;
|
||||
non-removable;
|
||||
keep-power-in-suspend;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdog>;
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
pinctrl_audmux: audmuxgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
|
||||
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
|
||||
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
|
||||
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_display: dispgrp {
|
||||
fsl,pins = <
|
||||
/* BLEN_OUT */
|
||||
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
|
||||
/* LVDS_PPEN_OUT */
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi1: ecspi1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
||||
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
||||
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
||||
/* SPI1 CS */
|
||||
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi5: ecspi5grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0
|
||||
MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0
|
||||
MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0
|
||||
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
|
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
|
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
||||
/* FEC Reset */
|
||||
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
|
||||
/* AR8033 Interrupt */
|
||||
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
/* GPIO 0-7 */
|
||||
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
|
||||
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
|
||||
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
|
||||
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
|
||||
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
|
||||
MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0
|
||||
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
|
||||
MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
|
||||
/* SUS_S3_OUT to CPLD */
|
||||
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
|
||||
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pcie: pciegrp {
|
||||
fsl,pins = <
|
||||
/* PCIe Reset */
|
||||
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
|
||||
/* PCIe Wake */
|
||||
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
/* PMIC Interrupt */
|
||||
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm1: pwm1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm2: pwm2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_rtc: rtcgrp {
|
||||
fsl,pins = <
|
||||
/* RTC_INT */
|
||||
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart3: uart3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbhub: usbhubgrp {
|
||||
fsl,pins = <
|
||||
/* HUB_RESET */
|
||||
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
||||
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
||||
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
||||
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
||||
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
||||
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
||||
/* uSDHC2 CD */
|
||||
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||||
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
|
||||
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
|
||||
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
|
||||
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_reset: usdhc3grp-reset {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc4: usdhc4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
||||
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
|
||||
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
||||
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
||||
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
||||
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
||||
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
|
||||
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
|
||||
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
|
||||
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
|
||||
/* uSDHC4 CD */
|
||||
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
|
||||
/* uSDHC4 SDIO PWR */
|
||||
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
|
||||
/* uSDHC4 SDIO WP */
|
||||
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
|
||||
/* uSDHC4 SDIO LED */
|
||||
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wdog: wdoggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
|
||||
>;
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче