From 88fcf710c13bd41f2b98c5411e4f21ab98da4fb4 Mon Sep 17 00:00:00 2001 From: Yong Wang Date: Fri, 19 Mar 2010 23:02:16 -0700 Subject: [PATCH 01/10] Input: sparse-keymap - free the right keymap on error 'map' is allocated in sparse_keymap_setup() and it it the one that should be freed on error instead of 'keymap'. Signed-off-by: Yong Wang Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/sparse-keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c index e6bde55e5203..f64e004935a9 100644 --- a/drivers/input/sparse-keymap.c +++ b/drivers/input/sparse-keymap.c @@ -163,7 +163,7 @@ int sparse_keymap_setup(struct input_dev *dev, return 0; err_out: - kfree(keymap); + kfree(map); return error; } From d90e6f6aad0ffdc674bc3a05c85c40dcc18e604c Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 20 Mar 2010 00:06:40 -0700 Subject: [PATCH 02/10] Input: bcm5974 - retract efi-broken suspend_resume With the recent system-wide improvements on suspend/resume and EFI booting the suspend_resume method of the bcm5974 has broken. When waking up from the S3 state on the MacBookAir, the trackpad is found in a yet unknown state, unable to switch to the proper multitouch mode. The result is a frozen touchpad, and a flood of errors of the kind bcm5974: bad trackpad package, length: 8. This patch retracts the reset_resume method altogether, falling back on the generic unbind/rebind functionality of the usb layer until further investigations can be made as how to reset the device when booting from efi. Signed-off-by: Henrik Rydberg Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 4f8fe0886b2a..b89879bd860f 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -803,7 +803,6 @@ static struct usb_driver bcm5974_driver = { .disconnect = bcm5974_disconnect, .suspend = bcm5974_suspend, .resume = bcm5974_resume, - .reset_resume = bcm5974_resume, .id_table = bcm5974_table, .supports_autosuspend = 1, }; From 97065e033ec5fd824d0133ecd0c614fe1e5c20bd Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sun, 21 Mar 2010 22:31:26 -0700 Subject: [PATCH 03/10] Input: clarify the no-finger event in multitouch protocol The current documentation does not explicitly specify how to report zero fingers, leaving a potential problem in the driver implementations and giving no parsing directive to userland. This patch defines two equally valid ways. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- Documentation/input/multi-touch-protocol.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 8490480ce432..eacb22606664 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -68,6 +68,22 @@ like: SYN_MT_REPORT SYN_REPORT +Here is the sequence after lifting one of the fingers: + + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + SYN_REPORT + +And here is the sequence after lifting the remaining finger: + + SYN_MT_REPORT + SYN_REPORT + +If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the +ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the +last SYN_REPORT will be dropped by the input core, resulting in no +zero-finger event reaching userland. Event Semantics --------------- From 13bad37b04c779d98983307a27f97e9caa36f9b1 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sun, 21 Mar 2010 22:31:26 -0700 Subject: [PATCH 04/10] Input: update the status of the Multitouch X driver project The Multitouch X driver project has moved to alpha status. This patch updates the documentation accordingly. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- Documentation/input/multi-touch-protocol.txt | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index eacb22606664..c0fc1c75fd88 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -233,11 +233,6 @@ where examples can be found. difference between the contact position and the approaching tool position could be used to derive tilt. [2] The list can of course be extended. -[3] The multi-touch X driver is currently in the prototyping stage. At the -time of writing (April 2009), the MT protocol is not yet merged, and the -prototype implements finger matching, basic mouse support and two-finger -scrolling. The project aims at improving the quality of current multi-touch -functionality available in the Synaptics X driver, and in addition -implement more advanced gestures. +[3] Multitouch X driver project: http://bitmath.org/code/multitouch/. [4] See the section on event computation. [5] See the section on finger tracking. From 2e2e3b96d98d5c17e9c09bc6088df3e182a71814 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 21 Mar 2010 22:56:15 -0700 Subject: [PATCH 05/10] Input: sparse-keymap - implement safer freeing of the keymap Allow calling sparse_keymap_free() before unregistering input device whithout risk of racing with EVIOCGETKEYCODE and EVIOCSETKEYCODE. This makes life of drivers writers easier. Acked-by: Yong Wang Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 9 ++++++- drivers/input/sparse-keymap.c | 50 ++++++++++++++++++++++------------- 2 files changed, 40 insertions(+), 19 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index e2aad0a51826..be18fa99fa24 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -659,7 +659,14 @@ static int input_default_setkeycode(struct input_dev *dev, int input_get_keycode(struct input_dev *dev, unsigned int scancode, unsigned int *keycode) { - return dev->getkeycode(dev, scancode, keycode); + unsigned long flags; + int retval; + + spin_lock_irqsave(&dev->event_lock, flags); + retval = dev->getkeycode(dev, scancode, keycode); + spin_unlock_irqrestore(&dev->event_lock, flags); + + return retval; } EXPORT_SYMBOL(input_get_keycode); diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c index f64e004935a9..2434ac5d43fe 100644 --- a/drivers/input/sparse-keymap.c +++ b/drivers/input/sparse-keymap.c @@ -67,12 +67,14 @@ static int sparse_keymap_getkeycode(struct input_dev *dev, unsigned int scancode, unsigned int *keycode) { - const struct key_entry *key = - sparse_keymap_entry_from_scancode(dev, scancode); + const struct key_entry *key; - if (key && key->type == KE_KEY) { - *keycode = key->keycode; - return 0; + if (dev->keycode) { + key = sparse_keymap_entry_from_scancode(dev, scancode); + if (key && key->type == KE_KEY) { + *keycode = key->keycode; + return 0; + } } return -EINVAL; @@ -85,17 +87,16 @@ static int sparse_keymap_setkeycode(struct input_dev *dev, struct key_entry *key; int old_keycode; - if (keycode < 0 || keycode > KEY_MAX) - return -EINVAL; - - key = sparse_keymap_entry_from_scancode(dev, scancode); - if (key && key->type == KE_KEY) { - old_keycode = key->keycode; - key->keycode = keycode; - set_bit(keycode, dev->keybit); - if (!sparse_keymap_entry_from_keycode(dev, old_keycode)) - clear_bit(old_keycode, dev->keybit); - return 0; + if (dev->keycode) { + key = sparse_keymap_entry_from_scancode(dev, scancode); + if (key && key->type == KE_KEY) { + old_keycode = key->keycode; + key->keycode = keycode; + set_bit(keycode, dev->keybit); + if (!sparse_keymap_entry_from_keycode(dev, old_keycode)) + clear_bit(old_keycode, dev->keybit); + return 0; + } } return -EINVAL; @@ -175,14 +176,27 @@ EXPORT_SYMBOL(sparse_keymap_setup); * * This function is used to free memory allocated by sparse keymap * in an input device that was set up by sparse_keymap_setup(). + * NOTE: It is safe to cal this function while input device is + * still registered (however the drivers should care not to try to + * use freed keymap and thus have to shut off interrups/polling + * before freeing the keymap). */ void sparse_keymap_free(struct input_dev *dev) { + unsigned long flags; + + /* + * Take event lock to prevent racing with input_get_keycode() + * and input_set_keycode() if we are called while input device + * is still registered. + */ + spin_lock_irqsave(&dev->event_lock, flags); + kfree(dev->keycode); dev->keycode = NULL; dev->keycodemax = 0; - dev->getkeycode = NULL; - dev->setkeycode = NULL; + + spin_unlock_irqrestore(&dev->event_lock, flags); } EXPORT_SYMBOL(sparse_keymap_free); From 2c860a1101471a69f7a6778b7b1fb43344c38619 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Mon, 5 Apr 2010 22:29:09 -0700 Subject: [PATCH 06/10] Input: i8042 - spelling fix Signed-off-by: Dominik Brodowski Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index fce8ab7e89a1..90e56684f513 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -38,7 +38,7 @@ MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port."); static bool i8042_nomux; module_param_named(nomux, i8042_nomux, bool, 0); -MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present."); +MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing controller is present."); static bool i8042_unlock; module_param_named(unlock, i8042_unlock, bool, 0); From 5e28d8eb68c12eab9c4a47b42ba993a6420d71d3 Mon Sep 17 00:00:00 2001 From: Chase Douglas Date: Mon, 5 Apr 2010 22:29:08 -0700 Subject: [PATCH 07/10] Input: ALPS - add signature for HP Pavilion dm3 laptops Tested by a user running Ubuntu 9.10 in the following bug report. BugLink: http://bugs.launchpad.net/bugs/545307 Signed-off-by: Chase Douglas Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 7490f1da4a53..2a791e0ef970 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -63,6 +63,7 @@ static const struct alps_model_info alps_model_data[] = { { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ + { { 0x73, 0x02, 0x64 }, 0xf8, 0xf8, 0 }, /* HP Pavilion dm3 */ { { 0x52, 0x01, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ }; From 9d32c30542f9ecdb4b96a1a960924c9f403e3562 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 5 Apr 2010 22:29:09 -0700 Subject: [PATCH 08/10] Input: matrix_keypad - allow platform to disable key autorepeat In an embedded system the matrix_keypad driver might be used to interface with an external control panel and not an actual keyboard. On the control panel some of the keys could be used to turn on/off various functions. If key autorepeat is enabled this causes the function to quickly toggle between the on and off states and makes operation difficult. Add an option in the platform-specific data to disable the key autorepeat. Signed-off-by: H Hartley Sweeten Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/matrix_keypad.c | 4 +++- include/linux/input/matrix_keypad.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index d3c8b61a941d..f9d86cfb0db0 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -373,7 +373,9 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev) input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &pdev->dev; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->evbit[0] = BIT_MASK(EV_KEY); + if (!pdata->no_autorepeat) + input_dev->evbit[0] |= BIT_MASK(EV_REP); input_dev->open = matrix_keypad_start; input_dev->close = matrix_keypad_stop; diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index 3bd018baae20..c964cd7f436a 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -44,6 +44,7 @@ struct matrix_keymap_data { * @active_low: gpio polarity * @wakeup: controls whether the device should be set up as wakeup * source + * @no_autorepeat: disable key autorepeat * * This structure represents platform-specific data that use used by * matrix_keypad driver to perform proper initialization. @@ -64,6 +65,7 @@ struct matrix_keypad_platform_data { bool active_low; bool wakeup; + bool no_autorepeat; }; /** From afb567e3fdd2ee43b243cb4f6fe772ab921b2ada Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 13 Apr 2010 23:08:58 -0700 Subject: [PATCH 09/10] Revert "Input: wacom - merge out and in prox events" This reverts commit 776943fd6f104a6e8457dc95a17282e69e963666 as it causes issues with ISDv4 E3 touchscreens: https://bugzilla.kernel.org/show_bug.cgi?id=15670 Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 163 ++++++++++++++++++++----------- 1 file changed, 104 insertions(+), 59 deletions(-) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index b3ba3437a2eb..4a852d815c68 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -155,19 +155,19 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) { struct wacom_features *features = &wacom->features; unsigned char *data = wacom->data; - int x, y, prox; - int rw = 0; - int retval = 0; + int x, y, rw; + static int penData = 0; if (data[0] != WACOM_REPORT_PENABLED) { dbg("wacom_graphire_irq: received unknown report #%d", data[0]); - goto exit; + return 0; } - prox = data[1] & 0x80; - if (prox || wacom->id[0]) { - if (prox) { - switch ((data[1] >> 5) & 3) { + if (data[1] & 0x80) { + /* in prox and not a pad data */ + penData = 1; + + switch ((data[1] >> 5) & 3) { case 0: /* Pen */ wacom->tool[0] = BTN_TOOL_PEN; @@ -181,13 +181,23 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) case 2: /* Mouse with wheel */ wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04); + if (features->type == WACOM_G4 || features->type == WACOM_MO) { + rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03); + wacom_report_rel(wcombo, REL_WHEEL, -rw); + } else + wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]); /* fall through */ case 3: /* Mouse without wheel */ wacom->tool[0] = BTN_TOOL_MOUSE; wacom->id[0] = CURSOR_DEVICE_ID; + wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01); + wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02); + if (features->type == WACOM_G4 || features->type == WACOM_MO) + wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f); + else + wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f); break; - } } x = wacom_le16_to_cpu(&data[2]); y = wacom_le16_to_cpu(&data[4]); @@ -198,32 +208,36 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01); wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04); - } else { - wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01); - wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02); - if (features->type == WACOM_G4 || - features->type == WACOM_MO) { - wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f); - rw = (signed)(data[7] & 0x04) - (data[7] & 0x03); - } else { - wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f); - rw = -(signed)data[6]; - } - wacom_report_rel(wcombo, REL_WHEEL, rw); } - - if (!prox) - wacom->id[0] = 0; wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */ - wacom_report_key(wcombo, wacom->tool[0], prox); - wacom_input_sync(wcombo); /* sync last event */ + wacom_report_key(wcombo, wacom->tool[0], 1); + } else if (wacom->id[0]) { + wacom_report_abs(wcombo, ABS_X, 0); + wacom_report_abs(wcombo, ABS_Y, 0); + if (wacom->tool[0] == BTN_TOOL_MOUSE) { + wacom_report_key(wcombo, BTN_LEFT, 0); + wacom_report_key(wcombo, BTN_RIGHT, 0); + wacom_report_abs(wcombo, ABS_DISTANCE, 0); + } else { + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + } + wacom->id[0] = 0; + wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ + wacom_report_key(wcombo, wacom->tool[0], 0); } /* send pad data */ switch (features->type) { case WACOM_G4: - prox = data[7] & 0xf8; - if (prox || wacom->id[1]) { + if (data[7] & 0xf8) { + if (penData) { + wacom_input_sync(wcombo); /* sync last event */ + if (!wacom->id[0]) + penData = 0; + } wacom->id[1] = PAD_DEVICE_ID; wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); wacom_report_key(wcombo, BTN_4, (data[7] & 0x80)); @@ -231,16 +245,29 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_rel(wcombo, REL_WHEEL, rw); wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0); wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]); - if (!prox) - wacom->id[1] = 0; - wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); + } else if (wacom->id[1]) { + if (penData) { + wacom_input_sync(wcombo); /* sync last event */ + if (!wacom->id[0]) + penData = 0; + } + wacom->id[1] = 0; + wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); + wacom_report_key(wcombo, BTN_4, (data[7] & 0x80)); + wacom_report_rel(wcombo, REL_WHEEL, 0); + wacom_report_key(wcombo, BTN_TOOL_FINGER, 0); + wacom_report_abs(wcombo, ABS_MISC, 0); wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); } - retval = 1; break; case WACOM_MO: - prox = (data[7] & 0xf8) || data[8]; - if (prox || wacom->id[1]) { + if ((data[7] & 0xf8) || (data[8] & 0xff)) { + if (penData) { + wacom_input_sync(wcombo); /* sync last event */ + if (!wacom->id[0]) + penData = 0; + } wacom->id[1] = PAD_DEVICE_ID; wacom_report_key(wcombo, BTN_0, (data[7] & 0x08)); wacom_report_key(wcombo, BTN_1, (data[7] & 0x20)); @@ -248,16 +275,27 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_5, (data[7] & 0x40)); wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f)); wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0); - if (!prox) - wacom->id[1] = 0; wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]); wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); + } else if (wacom->id[1]) { + if (penData) { + wacom_input_sync(wcombo); /* sync last event */ + if (!wacom->id[0]) + penData = 0; + } + wacom->id[1] = 0; + wacom_report_key(wcombo, BTN_0, (data[7] & 0x08)); + wacom_report_key(wcombo, BTN_1, (data[7] & 0x20)); + wacom_report_key(wcombo, BTN_4, (data[7] & 0x10)); + wacom_report_key(wcombo, BTN_5, (data[7] & 0x40)); + wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f)); + wacom_report_key(wcombo, BTN_TOOL_FINGER, 0); + wacom_report_abs(wcombo, ABS_MISC, 0); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); } - retval = 1; break; } -exit: - return retval; + return 1; } static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) @@ -598,9 +636,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) static void wacom_tpc_finger_in(struct wacom_wac *wacom, void *wcombo, char *data, int idx) { wacom_report_abs(wcombo, ABS_X, - data[2 + idx * 2] | ((data[3 + idx * 2] & 0x7f) << 8)); + (data[2 + idx * 2] & 0xff) | ((data[3 + idx * 2] & 0x7f) << 8)); wacom_report_abs(wcombo, ABS_Y, - data[6 + idx * 2] | ((data[7 + idx * 2] & 0x7f) << 8)); + (data[6 + idx * 2] & 0xff) | ((data[7 + idx * 2] & 0x7f) << 8)); wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); wacom_report_key(wcombo, wacom->tool[idx], 1); if (idx) @@ -744,24 +782,31 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo) touchInProx = 0; - if (!wacom->id[0]) { /* first in prox */ - /* Going into proximity select tool */ - wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; - if (wacom->tool[0] == BTN_TOOL_PEN) - wacom->id[0] = STYLUS_DEVICE_ID; - else - wacom->id[0] = ERASER_DEVICE_ID; - } - wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); - wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10); - wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); - wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); - pressure = ((data[7] & 0x01) << 8) | data[6]; - if (pressure < 0) - pressure = features->pressure_max + pressure + 1; - wacom_report_abs(wcombo, ABS_PRESSURE, pressure); - wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05); - if (!prox) { /* out-prox */ + if (prox) { /* in prox */ + if (!wacom->id[0]) { + /* Going into proximity select tool */ + wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + if (wacom->tool[0] == BTN_TOOL_PEN) + wacom->id[0] = STYLUS_DEVICE_ID; + else + wacom->id[0] = ERASER_DEVICE_ID; + } + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10); + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + pressure = ((data[7] & 0x01) << 8) | data[6]; + if (pressure < 0) + pressure = features->pressure_max + pressure + 1; + wacom_report_abs(wcombo, ABS_PRESSURE, pressure); + wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05); + } else { + wacom_report_abs(wcombo, ABS_X, 0); + wacom_report_abs(wcombo, ABS_Y, 0); + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); wacom->id[0] = 0; /* pen is out so touch can be enabled now */ touchInProx = 1; From 38101475f937c5dc0baf43a9e0c7613dbeb94d5a Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Tue, 13 Apr 2010 23:07:52 -0700 Subject: [PATCH 10/10] Input: wacom - switch mode upon system resume When Wacom devices wake up from a sleep, the switch mode command (wacom_query_tablet_data) is needed before wacom_open is called. wacom_query_tablet_data should not be executed inside wacom_open since wacom_open is called more than once during probe. wacom_retrieve_hid_descriptor is removed from wacom_resume due to the fact that the required descriptors are stored properly upon system resume. Signed-off-by: Ping Cheng Reported-and-tested-by: Anton Anikin Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 8b5d2873f0c4..f46502589e4e 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -673,13 +673,15 @@ static int wacom_resume(struct usb_interface *intf) int rv; mutex_lock(&wacom->lock); - if (wacom->open) { + + /* switch to wacom mode first */ + wacom_query_tablet_data(intf, features); + + if (wacom->open) rv = usb_submit_urb(wacom->irq, GFP_NOIO); - /* switch to wacom mode if needed */ - if (!wacom_retrieve_hid_descriptor(intf, features)) - wacom_query_tablet_data(intf, features); - } else + else rv = 0; + mutex_unlock(&wacom->lock); return rv;