selftests: pmtu: Introduce FoU and GUE PMTU exceptions tests

Introduce eight tests, for FoU and GUE, with IPv4 and IPv6 payload,
on IPv4 and IPv6 transport, that check that PMTU exceptions are created
with the right value when exceeding the MTU on a link of the path.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Stefano Brivio 2018-11-08 12:19:24 +01:00 коммит произвёл David S. Miller
Родитель b8a51b38e4
Коммит 56fd865f46
1 изменённых файлов: 179 добавлений и 0 удалений

Просмотреть файл

@ -59,6 +59,14 @@
# Same as pmtu_ipv6_vxlan6_exception, but using a GENEVE tunnel instead of
# VXLAN
#
# - pmtu_ipv{4,6}_fou{4,6}_exception
# Same as pmtu_ipv4_vxlan4, but using a direct IPv4/IPv6 encapsulation
# (FoU) over IPv4/IPv6, instead of VXLAN
#
# - pmtu_ipv{4,6}_fou{4,6}_exception
# Same as pmtu_ipv4_vxlan4, but using a generic UDP IPv4/IPv6
# encapsulation (GUE) over IPv4/IPv6, instead of VXLAN
#
# - pmtu_vti4_exception
# Set up vti tunnel on top of veth, with xfrm states and policies, in two
# namespaces with matching endpoints. Check that route exception is not
@ -113,6 +121,14 @@ tests="
pmtu_ipv6_geneve4_exception IPv6 over geneve4: PMTU exceptions
pmtu_ipv4_geneve6_exception IPv4 over geneve6: PMTU exceptions
pmtu_ipv6_geneve6_exception IPv6 over geneve6: PMTU exceptions
pmtu_ipv4_fou4_exception IPv4 over fou4: PMTU exceptions
pmtu_ipv6_fou4_exception IPv6 over fou4: PMTU exceptions
pmtu_ipv4_fou6_exception IPv4 over fou6: PMTU exceptions
pmtu_ipv6_fou6_exception IPv6 over fou6: PMTU exceptions
pmtu_ipv4_gue4_exception IPv4 over gue4: PMTU exceptions
pmtu_ipv6_gue4_exception IPv6 over gue4: PMTU exceptions
pmtu_ipv4_gue6_exception IPv4 over gue6: PMTU exceptions
pmtu_ipv6_gue6_exception IPv6 over gue6: PMTU exceptions
pmtu_vti6_exception vti6: PMTU exceptions
pmtu_vti4_exception vti4: PMTU exceptions
pmtu_vti4_default_mtu vti4: default MTU assignment
@ -200,6 +216,89 @@ nsname() {
eval echo \$NS_$1
}
setup_fou_or_gue() {
outer="${1}"
inner="${2}"
encap="${3}"
if [ "${outer}" = "4" ]; then
modprobe fou || return 2
a_addr="${prefix4}.${a_r1}.1"
b_addr="${prefix4}.${b_r1}.1"
if [ "${inner}" = "4" ]; then
type="ipip"
ipproto="4"
else
type="sit"
ipproto="41"
fi
else
modprobe fou6 || return 2
a_addr="${prefix6}:${a_r1}::1"
b_addr="${prefix6}:${b_r1}::1"
if [ "${inner}" = "4" ]; then
type="ip6tnl"
mode="mode ipip6"
ipproto="4 -6"
else
type="ip6tnl"
mode="mode ip6ip6"
ipproto="41 -6"
fi
fi
${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2
${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2
${ns_b} ip fou add port 5556 ipproto ${ipproto}
${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555
if [ "${inner}" = "4" ]; then
${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a
${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b
else
${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a
${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b
fi
${ns_a} ip link set ${encap}_a up
${ns_b} ip link set ${encap}_b up
sleep 1
}
setup_fou44() {
setup_fou_or_gue 4 4 fou
}
setup_fou46() {
setup_fou_or_gue 4 6 fou
}
setup_fou64() {
setup_fou_or_gue 6 4 fou
}
setup_fou66() {
setup_fou_or_gue 6 6 fou
}
setup_gue44() {
setup_fou_or_gue 4 4 gue
}
setup_gue46() {
setup_fou_or_gue 4 6 gue
}
setup_gue64() {
setup_fou_or_gue 6 4 gue
}
setup_gue66() {
setup_fou_or_gue 6 6 gue
}
setup_namespaces() {
for n in ${NS_A} ${NS_B} ${NS_R1} ${NS_R2}; do
ip netns add ${n} || return 1
@ -627,6 +726,86 @@ test_pmtu_ipv6_geneve6_exception() {
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 6
}
test_pmtu_ipvX_over_fouY_or_gueY() {
inner_family=${1}
outer_family=${2}
encap=${3}
ll_mtu=4000
setup namespaces routing ${encap}${outer_family}${inner_family} || return 2
trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \
"${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
"${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B
if [ ${inner_family} -eq 4 ]; then
ping=ping
dst=${tunnel4_b_addr}
else
ping=${ping6}
dst=${tunnel6_b_addr}
fi
if [ "${encap}" = "gue" ]; then
encap_overhead=4
else
encap_overhead=0
fi
if [ ${outer_family} -eq 4 ]; then
# IPv4 header UDP header
exp_mtu=$((${ll_mtu} - 20 - 8 - ${encap_overhead}))
else
# IPv6 header Option 4 UDP header
exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - ${encap_overhead}))
fi
# Create route exception by exceeding link layer MTU
mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000))
mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
mtu "${ns_b}" veth_B-R1 ${ll_mtu}
mtu "${ns_r1}" veth_R1-B ${ll_mtu}
mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000))
mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000))
${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${encap} interface"
}
test_pmtu_ipv4_fou4_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 4 4 fou
}
test_pmtu_ipv6_fou4_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 6 4 fou
}
test_pmtu_ipv4_fou6_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 4 6 fou
}
test_pmtu_ipv6_fou6_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 6 6 fou
}
test_pmtu_ipv4_gue4_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 4 4 gue
}
test_pmtu_ipv6_gue4_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 6 4 gue
}
test_pmtu_ipv4_gue6_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 4 6 gue
}
test_pmtu_ipv6_gue6_exception() {
test_pmtu_ipvX_over_fouY_or_gueY 6 6 gue
}
test_pmtu_vti4_exception() {
setup namespaces veth vti4 xfrm4 || return 2
trace "${ns_a}" veth_a "${ns_b}" veth_b \