iwlwifi: pcie: update sw error interrupt for BZ family

The cause for sw error in BZ device family was changed

Signed-off-by: Mike Golant <michael.golant@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.f674cd409b8e.I519f554d0a22d4711077785ec2bd7c564997241f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

drivers/net/wireless/intel/iwlwifi/iwl-csr.h

@@ -605,6 +605,7 @@ enum msix_hw_int_causes {
 	MSIX_HW_INT_CAUSES_REG_WAKEUP		= BIT(1),
 	MSIX_HW_INT_CAUSES_REG_IML              = BIT(1),
 	MSIX_HW_INT_CAUSES_REG_RESET_DONE	= BIT(2),
+	MSIX_HW_INT_CAUSES_REG_SW_ERR_BZ	= BIT(5),
 	MSIX_HW_INT_CAUSES_REG_CT_KILL		= BIT(6),
 	MSIX_HW_INT_CAUSES_REG_RF_KILL		= BIT(7),
 	MSIX_HW_INT_CAUSES_REG_PERIODIC		= BIT(8),

drivers/net/wireless/intel/iwlwifi/pcie/rx.c

@@ -2149,6 +2149,7 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id)
 	u32 inta_fh_msk = ~MSIX_FH_INT_CAUSES_DATA_QUEUE;
 	u32 inta_fh, inta_hw;
 	bool polling = false;
+	bool sw_err;
 
 	if (trans_pcie->shared_vec_mask & IWL_SHARED_IRQ_NON_RX)
 		inta_fh_msk |= MSIX_FH_INT_CAUSES_Q0;
@@ -2221,9 +2222,13 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id)
 		wake_up(&trans_pcie->ucode_write_waitq);
 	}
 
+	if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ)
+		sw_err = inta_hw & MSIX_HW_INT_CAUSES_REG_SW_ERR_BZ;
+	else
+		sw_err = inta_hw & MSIX_HW_INT_CAUSES_REG_SW_ERR;
+
 	/* Error detected by uCode */
-	if ((inta_fh & MSIX_FH_INT_CAUSES_FH_ERR) ||
-	    (inta_hw & MSIX_HW_INT_CAUSES_REG_SW_ERR)) {
+	if ((inta_fh & MSIX_FH_INT_CAUSES_FH_ERR) || sw_err) {
 		IWL_ERR(trans,
 			"Microcode SW error detected. Restarting 0x%X.\n",
 			inta_fh);

drivers/net/wireless/intel/iwlwifi/pcie/trans.c

@@ -1062,7 +1062,7 @@ struct iwl_causes_list {
 	u8 addr;
 };
 
-static struct iwl_causes_list causes_list[] = {
+static const struct iwl_causes_list causes_list_common[] = {
 	{MSIX_FH_INT_CAUSES_D2S_CH0_NUM,	CSR_MSIX_FH_INT_MASK_AD, 0},
 	{MSIX_FH_INT_CAUSES_D2S_CH1_NUM,	CSR_MSIX_FH_INT_MASK_AD, 0x1},
 	{MSIX_FH_INT_CAUSES_S2D,		CSR_MSIX_FH_INT_MASK_AD, 0x3},
@@ -1073,25 +1073,26 @@ static struct iwl_causes_list causes_list[] = {
 	{MSIX_HW_INT_CAUSES_REG_CT_KILL,	CSR_MSIX_HW_INT_MASK_AD, 0x16},
 	{MSIX_HW_INT_CAUSES_REG_RF_KILL,	CSR_MSIX_HW_INT_MASK_AD, 0x17},
 	{MSIX_HW_INT_CAUSES_REG_PERIODIC,	CSR_MSIX_HW_INT_MASK_AD, 0x18},
-	{MSIX_HW_INT_CAUSES_REG_SW_ERR,		CSR_MSIX_HW_INT_MASK_AD, 0x29},
 	{MSIX_HW_INT_CAUSES_REG_SCD,		CSR_MSIX_HW_INT_MASK_AD, 0x2A},
 	{MSIX_HW_INT_CAUSES_REG_FH_TX,		CSR_MSIX_HW_INT_MASK_AD, 0x2B},
 	{MSIX_HW_INT_CAUSES_REG_HW_ERR,		CSR_MSIX_HW_INT_MASK_AD, 0x2D},
 	{MSIX_HW_INT_CAUSES_REG_HAP,		CSR_MSIX_HW_INT_MASK_AD, 0x2E},
 };
 
-static void iwl_pcie_map_non_rx_causes(struct iwl_trans *trans)
-{
-	struct iwl_trans_pcie *trans_pcie =  IWL_TRANS_GET_PCIE_TRANS(trans);
-	int val = trans_pcie->def_irq | MSIX_NON_AUTO_CLEAR_CAUSE;
-	int i, arr_size = ARRAY_SIZE(causes_list);
-	struct iwl_causes_list *causes = causes_list;
+static const struct iwl_causes_list causes_list_pre_bz[] = {
+	{MSIX_HW_INT_CAUSES_REG_SW_ERR,		CSR_MSIX_HW_INT_MASK_AD, 0x29},
+};
+
+static const struct iwl_causes_list causes_list_bz[] = {
+	{MSIX_HW_INT_CAUSES_REG_SW_ERR_BZ,	CSR_MSIX_HW_INT_MASK_AD, 0x29},
+};
+
+static void iwl_pcie_map_list(struct iwl_trans *trans,
+			      const struct iwl_causes_list *causes,
+			      int arr_size, int val)
+{
+	int i;
 
-	/*
-	 * Access all non RX causes and map them to the default irq.
-	 * In case we are missing at least one interrupt vector,
-	 * the first interrupt vector will serve non-RX and FBQ causes.
-	 */
 	for (i = 0; i < arr_size; i++) {
 		iwl_write8(trans, CSR_MSIX_IVAR(causes[i].addr), val);
 		iwl_clear_bit(trans, causes[i].mask_reg,
@@ -1099,6 +1100,25 @@ static void iwl_pcie_map_non_rx_causes(struct iwl_trans *trans)
 	}
 }
 
+static void iwl_pcie_map_non_rx_causes(struct iwl_trans *trans)
+{
+	struct iwl_trans_pcie *trans_pcie =  IWL_TRANS_GET_PCIE_TRANS(trans);
+	int val = trans_pcie->def_irq | MSIX_NON_AUTO_CLEAR_CAUSE;
+	/*
+	 * Access all non RX causes and map them to the default irq.
+	 * In case we are missing at least one interrupt vector,
+	 * the first interrupt vector will serve non-RX and FBQ causes.
+	 */
+	iwl_pcie_map_list(trans, causes_list_common,
+			  ARRAY_SIZE(causes_list_common), val);
+	if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ)
+		iwl_pcie_map_list(trans, causes_list_bz,
+				  ARRAY_SIZE(causes_list_bz), val);
+	else
+		iwl_pcie_map_list(trans, causes_list_pre_bz,
+				  ARRAY_SIZE(causes_list_pre_bz), val);
+}
+
 static void iwl_pcie_map_rx_causes(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
@@ -3384,7 +3404,10 @@ static void iwl_trans_pcie_sync_nmi(struct iwl_trans *trans)
 
 	if (trans_pcie->msix_enabled) {
 		inta_addr = CSR_MSIX_HW_INT_CAUSES_AD;
-		sw_err_bit = MSIX_HW_INT_CAUSES_REG_SW_ERR;
+		if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ)
+			sw_err_bit = MSIX_HW_INT_CAUSES_REG_SW_ERR_BZ;
+		else
+			sw_err_bit = MSIX_HW_INT_CAUSES_REG_SW_ERR;
 	} else {
 		inta_addr = CSR_INT;
 		sw_err_bit = CSR_INT_BIT_SW_ERR;