ARM: 7254/1: restart: S3C24XX: move SWRST based S3C platforms to

S3C2412/S3C2416/S3C2443 use a special register to signal the reset to
the processor and used therefore the s3c24xx_reset_hook mechanism in the
s3c24xx-specific arch reset.

This patch introduces restart functions for these architectures,
moves the board files to them and removes the s3c24xx_reset_hook
infrastructure, as all users are gone.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Heiko Stuebner 2011-12-22 23:37:44 +01:00 коммит произвёл Russell King
Родитель e11e909df5
Коммит 5753897591
14 изменённых файлов: 27 добавлений и 42 удалений

Просмотреть файл

@ -1,22 +0,0 @@
/* arch/arm/mach-s3c2410/include/mach/reset.h
*
* Copyright (c) 2007 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* S3C2410 CPU reset controls
*/
#ifndef __ASM_ARCH_RESET_H
#define __ASM_ARCH_RESET_H __FILE__
/* This allows the over-ride of the default reset code
*/
extern void (*s3c24xx_reset_hook)(void);
#endif /* __ASM_ARCH_RESET_H */

Просмотреть файл

@ -13,8 +13,6 @@
#include <mach/hardware.h>
#include <plat/watchdog-reset.h>
extern void (*s3c24xx_reset_hook)(void);
static void
arch_reset(char mode, const char *cmd)
{
@ -22,9 +20,6 @@ arch_reset(char mode, const char *cmd)
soft_restart(0);
}
if (s3c24xx_reset_hook)
s3c24xx_reset_hook();
arch_wdt_reset();
/* we'll take a jump through zero as a poor second */

Просмотреть файл

@ -15,12 +15,10 @@
#include <mach/map.h>
#include <mach/idle.h>
#include <mach/reset.h>
#include <mach/regs-clock.h>
void (*s3c24xx_idle)(void);
void (*s3c24xx_reset_hook)(void);
void s3c24xx_default_idle(void)
{

Просмотреть файл

@ -48,6 +48,7 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <plat/s3c2412.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
@ -661,4 +662,5 @@ MACHINE_START(JIVE, "JIVE")
.map_io = jive_map_io,
.init_machine = jive_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2412_restart,
MACHINE_END

Просмотреть файл

@ -134,6 +134,7 @@ MACHINE_START(S3C2413, "S3C2413")
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2412_restart,
MACHINE_END
MACHINE_START(SMDK2412, "SMDK2412")
@ -145,6 +146,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2412_restart,
MACHINE_END
MACHINE_START(SMDK2413, "SMDK2413")
@ -156,4 +158,5 @@ MACHINE_START(SMDK2413, "SMDK2413")
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2412_restart,
MACHINE_END

Просмотреть файл

@ -162,4 +162,5 @@ MACHINE_START(VSTMS, "VSTMS")
.init_machine = vstms_init,
.map_io = vstms_map_io,
.timer = &s3c24xx_timer,
.restart = s3c2412_restart,
MACHINE_END

Просмотреть файл

@ -32,7 +32,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <mach/reset.h>
#include <mach/idle.h>
#include <plat/cpu-freq.h>
@ -131,8 +130,11 @@ static void s3c2412_idle(void)
cpu_do_idle();
}
static void s3c2412_hard_reset(void)
void s3c2412_restart(char mode, const char *cmd)
{
if (mode == 's')
soft_restart(0);
/* errata "Watch-dog/Software Reset Problem" specifies that
* this reset must be done with the SYSCLK sourced from
* EXTCLK instead of FOUT to avoid a glitch in the reset
@ -164,10 +166,6 @@ void __init s3c2412_map_io(void)
s3c24xx_idle = s3c2412_idle;
/* set custom reset hook */
s3c24xx_reset_hook = s3c2412_hard_reset;
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));

Просмотреть файл

@ -251,4 +251,5 @@ MACHINE_START(SMDK2416, "SMDK2416")
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2416_restart,
MACHINE_END

Просмотреть файл

@ -44,7 +44,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <mach/reset.h>
#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
@ -76,8 +75,11 @@ static struct sys_device s3c2416_sysdev = {
.cls = &s3c2416_sysclass,
};
static void s3c2416_hard_reset(void)
void s3c2416_restart(char mode, const char *cmd)
{
if (mode == 's')
soft_restart(0);
__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
}
@ -85,7 +87,6 @@ int __init s3c2416_init(void)
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
s3c24xx_reset_hook = s3c2416_hard_reset;
/* s3c24xx_idle = s3c2416_idle; */
/* change WDT IRQ number */

Просмотреть файл

@ -145,4 +145,5 @@ MACHINE_START(SMDK2443, "SMDK2443")
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2443_restart,
MACHINE_END

Просмотреть файл

@ -31,7 +31,6 @@
#include <asm/irq.h>
#include <mach/regs-s3c2443-clock.h>
#include <mach/reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@ -57,8 +56,11 @@ static struct sys_device s3c2443_sysdev = {
.cls = &s3c2443_sysclass,
};
static void s3c2443_hard_reset(void)
void s3c2443_restart(char mode, const char *cmd)
{
if (mode == 's')
soft_restart(0);
__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
}
@ -66,8 +68,6 @@ int __init s3c2443_init(void)
{
printk("S3C2443: Initialising architecture\n");
s3c24xx_reset_hook = s3c2443_hard_reset;
s3c_nand_setname("s3c2412-nand");
s3c_fb_setname("s3c2443-fb");

Просмотреть файл

@ -21,9 +21,12 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c2412_init_clocks(int xtal);
extern int s3c2412_baseclk_add(void);
extern void s3c2412_restart(char mode, const char *cmd);
#else
#define s3c2412_init_clocks NULL
#define s3c2412_init_uarts NULL
#define s3c2412_map_io NULL
#define s3c2412_init NULL
#define s3c2412_restart NULL
#endif

Просмотреть файл

@ -23,9 +23,11 @@ extern void s3c2416_init_clocks(int xtal);
extern int s3c2416_baseclk_add(void);
extern void s3c2416_restart(char mode, const char *cmd);
#else
#define s3c2416_init_clocks NULL
#define s3c2416_init_uarts NULL
#define s3c2416_map_io NULL
#define s3c2416_init NULL
#define s3c2416_restart NULL
#endif

Просмотреть файл

@ -24,11 +24,13 @@ extern void s3c2443_init_clocks(int xtal);
extern int s3c2443_baseclk_add(void);
extern void s3c2443_restart(char mode, const char *cmd);
#else
#define s3c2443_init_clocks NULL
#define s3c2443_init_uarts NULL
#define s3c2443_map_io NULL
#define s3c2443_init NULL
#define s3c2443_restart NULL
#endif
/* common code used by s3c2443 and others.