MIPS: Netlogic: Use PRID_IMP_MASK macro

Use PRID_IMP_MASK macro instead of 0xff00 to extract the processor
type.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6868/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/netlogic/mips-extns.h

@@ -146,9 +146,9 @@ static inline int hard_smp_processor_id(void)
 
 static inline int nlm_nodeid(void)
 {
-	uint32_t prid = read_c0_prid();
+	uint32_t prid = read_c0_prid() & PRID_IMP_MASK;
 
-	if ((prid & 0xff00) == PRID_IMP_NETLOGIC_XLP9XX)
+	if (prid == PRID_IMP_NETLOGIC_XLP9XX)
 		return (__read_32bit_c0_register($15, 1) >> 7) & 0x7;
 	else
 		return (__read_32bit_c0_register($15, 1) >> 5) & 0x3;

arch/mips/include/asm/netlogic/xlp-hal/xlp.h

@@ -99,7 +99,7 @@ void *xlp_dt_init(void *fdtp);
 
 static inline int cpu_is_xlpii(void)
 {
-	int chip = read_c0_prid() & 0xff00;
+	int chip = read_c0_prid() & PRID_IMP_MASK;
 
 	return chip == PRID_IMP_NETLOGIC_XLP2XX ||
 		chip == PRID_IMP_NETLOGIC_XLP9XX;
@@ -107,7 +107,7 @@ static inline int cpu_is_xlpii(void)
 
 static inline int cpu_is_xlp9xx(void)
 {
-	int chip = read_c0_prid() & 0xff00;
+	int chip = read_c0_prid() & PRID_IMP_MASK;
 
 	return chip == PRID_IMP_NETLOGIC_XLP9XX;
 }

arch/mips/netlogic/common/reset.S

@@ -35,6 +35,7 @@
 
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/cpu.h>
 #include <asm/cacheops.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
@@ -92,7 +93,7 @@
  */
 .macro	xlp_flush_l1_dcache
 	mfc0	t0, CP0_EBASE, 0
-	andi	t0, t0, 0xff00
+	andi	t0, t0, PRID_IMP_MASK
 	slt	t1, t0, 0x1200
 	beqz	t1, 15f
 	nop
@@ -171,7 +172,7 @@ FEXPORT(nlm_reset_entry)
 
 1:	/* Entry point on core wakeup */
 	mfc0	t0, CP0_EBASE, 0	/* processor ID */
-	andi	t0, 0xff00
+	andi	t0, PRID_IMP_MASK
 	li	t1, 0x1500		/* XLP 9xx */
 	beq	t0, t1, 2f		/* does not need to set coherent */
 	nop

arch/mips/netlogic/xlp/dt.c

@@ -48,7 +48,7 @@ static void *xlp_fdt_blob;
 void __init *xlp_dt_init(void *fdtp)
 {
 	if (!fdtp) {
-		switch (current_cpu_data.processor_id & 0xff00) {
+		switch (current_cpu_data.processor_id & PRID_IMP_MASK) {
 #ifdef CONFIG_DT_XLP_GVP
 		case PRID_IMP_NETLOGIC_XLP9XX:
 			fdtp = __dtb_xlp_gvp_begin;

arch/mips/netlogic/xlp/setup.c

@@ -121,7 +121,7 @@ void __init plat_mem_setup(void)
 
 const char *get_system_type(void)
 {
-	switch (read_c0_prid() & 0xff00) {
+	switch (read_c0_prid() & PRID_IMP_MASK) {
 	case PRID_IMP_NETLOGIC_XLP9XX:
 	case PRID_IMP_NETLOGIC_XLP2XX:
 		return "Broadcom XLPII Series";

arch/mips/netlogic/xlp/wakeup.c

@@ -139,7 +139,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 		} else {
 			fusemask = nlm_read_sys_reg(nodep->sysbase,
 						SYS_EFUSE_DEVICE_CFG_STATUS0);
-			switch (read_c0_prid() & 0xff00) {
+			switch (read_c0_prid() & PRID_IMP_MASK) {
 			case PRID_IMP_NETLOGIC_XLP3XX:
 				mask = 0xf;
 				break;