diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f4d06aea8460..27ec8923ddf6 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -235,12 +235,6 @@ config MACH_TOUCHBOOK
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP_3430SDP
-	bool "OMAP 3430 SDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_NOKIA_N810
        bool
 
@@ -282,16 +276,6 @@ config MACH_SBC3530
 	default y
 	select OMAP_PACKAGE_CUS
 
-config MACH_TI8168EVM
-	bool "TI8168 Evaluation Module"
-	depends on SOC_TI81XX
-	default y
-
-config MACH_TI8148EVM
-	bool "TI8148 Evaluation Module"
-	depends on SOC_TI81XX
-	default y
-
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 3e824f8fec48..00b35a31797d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
-obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
@@ -260,8 +259,6 @@ obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
-obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
-obj-$(CONFIG_MACH_TI8148EVM)		+= board-ti8168evm.o
 
 # Platform specific device init code
 
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
deleted file mode 100644
index 9857882c2f41..000000000000
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ /dev/null
@@ -1,604 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-3430sdp.c
- *
- * Copyright (C) 2007 Texas Instruments
- *
- * Modified from mach-omap2/board-generic.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/omap-twl4030.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <linux/omap-dma.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "gpmc.h"
-
-#include "soc.h"
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-qimonda-hyb18m512160af-6.h"
-#include "hsmmc.h"
-#include "pm.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#define CONFIG_DISABLE_HFCLK 1
-
-#define SDP3430_TS_GPIO_IRQ_SDPV1	3
-#define SDP3430_TS_GPIO_IRQ_SDPV2	2
-
-#define ENABLE_VAUX3_DEDICATED	0x03
-#define ENABLE_VAUX3_DEV_GRP	0x20
-
-#define TWL4030_MSECURE_GPIO 22
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(0, 4, KEY_C),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(1, 4, KEY_G),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(2, 4, KEY_3),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
-	KEY(3, 3, KEY_P),
-	KEY(3, 4, KEY_Q),
-	KEY(4, 0, KEY_R),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_T),
-	KEY(4, 3, KEY_U),
-	KEY(4, 4, KEY_D),
-	KEY(5, 0, KEY_V),
-	KEY(5, 1, KEY_W),
-	KEY(5, 2, KEY_L),
-	KEY(5, 3, KEY_S),
-	KEY(5, 4, KEY_H),
-	0
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data sdp3430_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 5,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
-#define SDP3430_LCD_PANEL_ENABLE_GPIO		5
-
-static void __init sdp3430_display_init(void)
-{
-	int r;
-
-	/*
-	 * the backlight GPIO doesn't directly go to the panel, it enables
-	 * an internal circuit on 3430sdp to create the signal V_BKL_28V,
-	 * this is connected to LED+ pin of the sharp panel. This GPIO
-	 * is left enabled in the board file, and not passed to the panel
-	 * as platform_data.
-	 */
-	r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO,
-				GPIOF_OUT_INIT_HIGH, "LCD Backlight");
-	if (r)
-		pr_err("failed to get LCD Backlight GPIO\n");
-
-}
-
-static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 16,
-
-	.resb_gpio		= SDP3430_LCD_PANEL_ENABLE_GPIO,
-	.ini_gpio		= -1,
-	.mo_gpio		= -1,
-	.lr_gpio		= -1,
-	.ud_gpio		= -1,
-};
-
-static struct platform_device sdp3430_lcd_device = {
-	.name                   = "panel-sharp-ls037v7dw01",
-	.id                     = 0,
-	.dev.platform_data      = &sdp3430_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = -1,
-};
-
-static struct platform_device sdp3430_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &sdp3430_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = -1,
-};
-
-static struct platform_device sdp3430_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &sdp3430_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data sdp3430_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device sdp3430_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &sdp3430_tv_pdata,
-};
-
-static struct omap_dss_board_info sdp3430_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		/* 8 bits (default) requires S6.3 == ON,
-		 * so the SIM card isn't used; else 4 bits.
-		 */
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= 4,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= 7,
-		.deferred	= true,
-	},
-	{}	/* Terminator */
-};
-
-static struct omap_tw4030_pdata omap_twl4030_audio_data = {
-	.voice_connected = true,
-	.custom_routing	= true,
-
-	.has_hs		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-	.has_hf		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-
-	.has_mainmic	= true,
-	.has_submic	= true,
-	.has_hsmic	= true,
-	.has_linein	= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-};
-
-static int sdp3430_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ),
-	 * gpio + 1 is "mmc1_cd" (input/IRQ)
-	 */
-	mmc[0].gpio_cd = gpio + 0;
-	mmc[1].gpio_cd = gpio + 1;
-	omap_hsmmc_late_init(mmc);
-
-	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
-
-	/* gpio + 15 is "sub_lcd_nRST" (output) */
-	gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
-
-	omap_twl4030_audio_data.jack_detect = gpio + 2;
-	omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
-				| BIT(16) | BIT(17),
-	.setup		= sdp3430_twl_gpio_setup,
-};
-
-/* regulator consumer mappings */
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/*
- * Apply all the fixed voltages since most versions of U-Boot
- * don't bother with that initialization.
- */
-
-/* VAUX1 for mainboard (irda and sub-lcd) */
-static struct regulator_init_data sdp3430_vaux1 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VAUX2 for camera module */
-static struct regulator_init_data sdp3430_vaux2 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VAUX3 for LCD board */
-static struct regulator_init_data sdp3430_vaux3 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(sdp3430_vaux3_supplies),
-	.consumer_supplies		= sdp3430_vaux3_supplies,
-};
-
-/* VAUX4 for OMAP VDD_CSI2 (camera) */
-static struct regulator_init_data sdp3430_vaux4 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data sdp3430_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc1_supplies),
-	.consumer_supplies	= sdp3430_vmmc1_supplies,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data sdp3430_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc2_supplies),
-	.consumer_supplies	= sdp3430_vmmc2_supplies,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data sdp3430_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vsim_supplies),
-	.consumer_supplies	= sdp3430_vsim_supplies,
-};
-
-static struct twl4030_platform_data sdp3430_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &sdp3430_gpio_data,
-	.keypad		= &sdp3430_kp_data,
-
-	.vaux1		= &sdp3430_vaux1,
-	.vaux2		= &sdp3430_vaux2,
-	.vaux3		= &sdp3430_vaux3,
-	.vaux4		= &sdp3430_vaux4,
-	.vmmc1		= &sdp3430_vmmc1,
-	.vmmc2		= &sdp3430_vmmc2,
-	.vsim		= &sdp3430_vsim,
-};
-
-static int __init omap3430_i2c_init(void)
-{
-	/* i2c1 for PMIC only */
-	omap3_pmic_get_config(&sdp3430_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
-			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-	sdp3430_twldata.vdac->constraints.apply_uV = true;
-	sdp3430_twldata.vpll2->constraints.apply_uV = true;
-	sdp3430_twldata.vpll2->constraints.name = "VDVI";
-
-	sdp3430_twldata.audio->codec->hs_extmute = 1;
-	sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL;
-
-	omap3_pmic_init("twl4030", &sdp3430_twldata);
-
-	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	/* i2c3 on display connector (for DVI, tfp410) */
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = 57,
-		.vcc_gpio = -EINVAL,
-	},
-	{
-		.port = 2,
-		.reset_gpio = 61,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define board_mux	NULL
-#endif
-
-/*
- * SDP3430 V2 Board CS organization
- * Different from SDP3430 V1. Now 4 switches used to specify CS
- *
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_3430[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "Bootloader-NOR",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "Params-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "Kernel-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "Filesystem-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
-	{
-		.name		= "X-Loader-OneNAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot Environment-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * (64 * 2048),
-	},
-	{
-		.name		= "File System-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
-		.size		= 6 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 40 * (64 * 2048),
-	},
-	{
-		.name		= "File System - NAND",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
-	},
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
-	{
-		.parts = sdp_nor_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
-	},
-	{
-		.parts = sdp_onenand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
-	},
-	{
-		.parts = sdp_nand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
-	},
-};
-
-static void __init omap_3430sdp_init(void)
-{
-	int gpio_pendown;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_hsmmc_init(mmc);
-	omap3430_i2c_init();
-	omap_display_init(&sdp3430_dss_data);
-	platform_device_register(&sdp3430_lcd_device);
-	platform_device_register(&sdp3430_tfp410_device);
-	platform_device_register(&sdp3430_dvi_connector_device);
-	platform_device_register(&sdp3430_tv_connector_device);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
-	else
-		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
-	omap_ads7846_init(1, gpio_pendown, 310, NULL);
-	omap_serial_init();
-	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
-	sdp3430_display_init();
-	enable_board_wakeup_source();
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
-	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap_3430sdp_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
deleted file mode 100644
index 6273c286e1d8..000000000000
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Code for TI8168/TI8148 EVM.
- *
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static struct omap_musb_board_data musb_board_data = {
-	.set_phy_power	= ti81xx_musb_phy_power,
-	.interface_type	= MUSB_INTERFACE_ULPI,
-	.mode           = MUSB_OTG,
-	.power		= 500,
-};
-
-static void __init ti81xx_evm_init(void)
-{
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	usb_musb_init(&musb_board_data);
-}
-
-MACHINE_START(TI8168EVM, "ti8168evm")
-	/* Maintainer: Texas Instruments */
-	.atag_offset	= 0x100,
-	.map_io		= ti81xx_map_io,
-	.init_early	= ti81xx_init_early,
-	.init_irq	= ti81xx_init_irq,
-	.init_time	= omap3_sync32k_timer_init,
-	.init_machine	= ti81xx_evm_init,
-	.init_late	= ti81xx_init_late,
-	.restart	= omap44xx_restart,
-MACHINE_END
-
-MACHINE_START(TI8148EVM, "ti8148evm")
-	/* Maintainer: Texas Instruments */
-	.atag_offset	= 0x100,
-	.map_io		= ti81xx_map_io,
-	.init_early	= ti81xx_init_early,
-	.init_irq	= ti81xx_init_irq,
-	.init_time	= omap3_sync32k_timer_init,
-	.init_machine	= ti81xx_evm_init,
-	.init_late	= ti81xx_init_late,
-	.restart	= omap44xx_restart,
-MACHINE_END