MIPS: ralink: adds support for MT7620 SoC family
Add support code for mt7620 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5177/
This commit is contained in:
John Crispin
Ralf Baechle
Родитель
293840b999
Коммит
594bde683d
|
|
@ -0,0 +1,76 @@
|
|||
/*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*
|
||||
* Parts of this file are based on Ralink's 2.6.21 BSP
|
||||
*
|
||||
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
* Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
*/
|
||||
|
||||
#ifndef _MT7620_REGS_H_
|
||||
#define _MT7620_REGS_H_
|
||||
|
||||
#define MT7620_SYSC_BASE 0x10000000
|
||||
|
||||
#define SYSC_REG_CHIP_NAME0 0x00
|
||||
#define SYSC_REG_CHIP_NAME1 0x04
|
||||
#define SYSC_REG_CHIP_REV 0x0c
|
||||
#define SYSC_REG_SYSTEM_CONFIG0 0x10
|
||||
#define SYSC_REG_SYSTEM_CONFIG1 0x14
|
||||
#define SYSC_REG_CPLL_CONFIG0 0x54
|
||||
#define SYSC_REG_CPLL_CONFIG1 0x58
|
||||
|
||||
#define MT7620N_CHIP_NAME0 0x33365452
|
||||
#define MT7620N_CHIP_NAME1 0x20203235
|
||||
|
||||
#define MT7620A_CHIP_NAME0 0x3637544d
|
||||
#define MT7620A_CHIP_NAME1 0x20203032
|
||||
|
||||
#define CHIP_REV_PKG_MASK 0x1
|
||||
#define CHIP_REV_PKG_SHIFT 16
|
||||
#define CHIP_REV_VER_MASK 0xf
|
||||
#define CHIP_REV_VER_SHIFT 8
|
||||
#define CHIP_REV_ECO_MASK 0xf
|
||||
|
||||
#define CPLL_SW_CONFIG_SHIFT 31
|
||||
#define CPLL_SW_CONFIG_MASK 0x1
|
||||
#define CPLL_CPU_CLK_SHIFT 24
|
||||
#define CPLL_CPU_CLK_MASK 0x1
|
||||
#define CPLL_MULT_RATIO_SHIFT 16
|
||||
#define CPLL_MULT_RATIO 0x7
|
||||
#define CPLL_DIV_RATIO_SHIFT 10
|
||||
#define CPLL_DIV_RATIO 0x3
|
||||
|
||||
#define SYSCFG0_DRAM_TYPE_MASK 0x3
|
||||
#define SYSCFG0_DRAM_TYPE_SHIFT 4
|
||||
#define SYSCFG0_DRAM_TYPE_SDRAM 0
|
||||
#define SYSCFG0_DRAM_TYPE_DDR1 1
|
||||
#define SYSCFG0_DRAM_TYPE_DDR2 2
|
||||
|
||||
#define MT7620_GPIO_MODE_I2C BIT(0)
|
||||
#define MT7620_GPIO_MODE_UART0_SHIFT 2
|
||||
#define MT7620_GPIO_MODE_UART0_MASK 0x7
|
||||
#define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
|
||||
#define MT7620_GPIO_MODE_UARTF 0x0
|
||||
#define MT7620_GPIO_MODE_PCM_UARTF 0x1
|
||||
#define MT7620_GPIO_MODE_PCM_I2S 0x2
|
||||
#define MT7620_GPIO_MODE_I2S_UARTF 0x3
|
||||
#define MT7620_GPIO_MODE_PCM_GPIO 0x4
|
||||
#define MT7620_GPIO_MODE_GPIO_UARTF 0x5
|
||||
#define MT7620_GPIO_MODE_GPIO_I2S 0x6
|
||||
#define MT7620_GPIO_MODE_GPIO 0x7
|
||||
#define MT7620_GPIO_MODE_UART1 BIT(5)
|
||||
#define MT7620_GPIO_MODE_MDIO BIT(8)
|
||||
#define MT7620_GPIO_MODE_RGMII1 BIT(9)
|
||||
#define MT7620_GPIO_MODE_RGMII2 BIT(10)
|
||||
#define MT7620_GPIO_MODE_SPI BIT(11)
|
||||
#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
|
||||
#define MT7620_GPIO_MODE_WLED BIT(13)
|
||||
#define MT7620_GPIO_MODE_JTAG BIT(15)
|
||||
#define MT7620_GPIO_MODE_EPHY BIT(15)
|
||||
#define MT7620_GPIO_MODE_WDT BIT(22)
|
||||
|
||||
#endif
|
||||
|
|
@ -20,6 +20,9 @@ choice
|
|||
select USB_ARCH_HAS_OHCI
|
||||
select USB_ARCH_HAS_EHCI
|
||||
|
||||
config SOC_MT7620
|
||||
bool "MT7620"
|
||||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
|
|||
obj-$(CONFIG_SOC_RT288X) += rt288x.o
|
||||
obj-$(CONFIG_SOC_RT305X) += rt305x.o
|
||||
obj-$(CONFIG_SOC_RT3883) += rt3883.o
|
||||
obj-$(CONFIG_SOC_MT7620) += mt7620.o
|
||||
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
|
||||
|
|
|
|||
|
|
@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
|
|||
# Ralink RT3883
|
||||
#
|
||||
load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
|
||||
|
||||
#
|
||||
# Ralink MT7620
|
||||
#
|
||||
load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
|
||||
|
|
|
|||
|
|
@ -0,0 +1,214 @@
|
|||
/*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*
|
||||
* Parts of this file are based on Ralink's 2.6.21 BSP
|
||||
*
|
||||
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
* Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/mach-ralink/ralink_regs.h>
|
||||
#include <asm/mach-ralink/mt7620.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
/* does the board have sdram or ddram */
|
||||
static int dram_type;
|
||||
|
||||
/* the pll dividers */
|
||||
static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
|
||||
|
||||
static struct ralink_pinmux_grp mode_mux[] = {
|
||||
{
|
||||
.name = "i2c",
|
||||
.mask = MT7620_GPIO_MODE_I2C,
|
||||
.gpio_first = 1,
|
||||
.gpio_last = 2,
|
||||
}, {
|
||||
.name = "spi",
|
||||
.mask = MT7620_GPIO_MODE_SPI,
|
||||
.gpio_first = 3,
|
||||
.gpio_last = 6,
|
||||
}, {
|
||||
.name = "uartlite",
|
||||
.mask = MT7620_GPIO_MODE_UART1,
|
||||
.gpio_first = 15,
|
||||
.gpio_last = 16,
|
||||
}, {
|
||||
.name = "wdt",
|
||||
.mask = MT7620_GPIO_MODE_WDT,
|
||||
.gpio_first = 17,
|
||||
.gpio_last = 17,
|
||||
}, {
|
||||
.name = "mdio",
|
||||
.mask = MT7620_GPIO_MODE_MDIO,
|
||||
.gpio_first = 22,
|
||||
.gpio_last = 23,
|
||||
}, {
|
||||
.name = "rgmii1",
|
||||
.mask = MT7620_GPIO_MODE_RGMII1,
|
||||
.gpio_first = 24,
|
||||
.gpio_last = 35,
|
||||
}, {
|
||||
.name = "spi refclk",
|
||||
.mask = MT7620_GPIO_MODE_SPI_REF_CLK,
|
||||
.gpio_first = 37,
|
||||
.gpio_last = 39,
|
||||
}, {
|
||||
.name = "jtag",
|
||||
.mask = MT7620_GPIO_MODE_JTAG,
|
||||
.gpio_first = 40,
|
||||
.gpio_last = 44,
|
||||
}, {
|
||||
/* shared lines with jtag */
|
||||
.name = "ephy",
|
||||
.mask = MT7620_GPIO_MODE_EPHY,
|
||||
.gpio_first = 40,
|
||||
.gpio_last = 44,
|
||||
}, {
|
||||
.name = "nand",
|
||||
.mask = MT7620_GPIO_MODE_JTAG,
|
||||
.gpio_first = 45,
|
||||
.gpio_last = 59,
|
||||
}, {
|
||||
.name = "rgmii2",
|
||||
.mask = MT7620_GPIO_MODE_RGMII2,
|
||||
.gpio_first = 60,
|
||||
.gpio_last = 71,
|
||||
}, {
|
||||
.name = "wled",
|
||||
.mask = MT7620_GPIO_MODE_WLED,
|
||||
.gpio_first = 72,
|
||||
.gpio_last = 72,
|
||||
}, {0}
|
||||
};
|
||||
|
||||
static struct ralink_pinmux_grp uart_mux[] = {
|
||||
{
|
||||
.name = "uartf",
|
||||
.mask = MT7620_GPIO_MODE_UARTF,
|
||||
.gpio_first = 7,
|
||||
.gpio_last = 14,
|
||||
}, {
|
||||
.name = "pcm uartf",
|
||||
.mask = MT7620_GPIO_MODE_PCM_UARTF,
|
||||
.gpio_first = 7,
|
||||
.gpio_last = 14,
|
||||
}, {
|
||||
.name = "pcm i2s",
|
||||
.mask = MT7620_GPIO_MODE_PCM_I2S,
|
||||
.gpio_first = 7,
|
||||
.gpio_last = 14,
|
||||
}, {
|
||||
.name = "i2s uartf",
|
||||
.mask = MT7620_GPIO_MODE_I2S_UARTF,
|
||||
.gpio_first = 7,
|
||||
.gpio_last = 14,
|
||||
}, {
|
||||
.name = "pcm gpio",
|
||||
.mask = MT7620_GPIO_MODE_PCM_GPIO,
|
||||
.gpio_first = 11,
|
||||
.gpio_last = 14,
|
||||
}, {
|
||||
.name = "gpio uartf",
|
||||
.mask = MT7620_GPIO_MODE_GPIO_UARTF,
|
||||
.gpio_first = 7,
|
||||
.gpio_last = 10,
|
||||
}, {
|
||||
.name = "gpio i2s",
|
||||
.mask = MT7620_GPIO_MODE_GPIO_I2S,
|
||||
.gpio_first = 7,
|
||||
.gpio_last = 10,
|
||||
}, {
|
||||
.name = "gpio",
|
||||
.mask = MT7620_GPIO_MODE_GPIO,
|
||||
}, {0}
|
||||
};
|
||||
|
||||
struct ralink_pinmux rt_gpio_pinmux = {
|
||||
.mode = mode_mux,
|
||||
.uart = uart_mux,
|
||||
.uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
|
||||
.uart_mask = MT7620_GPIO_MODE_UART0_MASK,
|
||||
};
|
||||
|
||||
void __init ralink_clk_init(void)
|
||||
{
|
||||
unsigned long cpu_rate, sys_rate;
|
||||
u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
|
||||
u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
|
||||
u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
|
||||
u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
|
||||
|
||||
if (cpu_clk) {
|
||||
cpu_rate = 480000000;
|
||||
} else if (!swconfig) {
|
||||
cpu_rate = 600000000;
|
||||
} else {
|
||||
u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
|
||||
u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
|
||||
|
||||
cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
|
||||
}
|
||||
|
||||
if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
|
||||
sys_rate = cpu_rate / 4;
|
||||
else
|
||||
sys_rate = cpu_rate / 3;
|
||||
|
||||
ralink_clk_add("cpu", cpu_rate);
|
||||
ralink_clk_add("10000100.timer", 40000000);
|
||||
ralink_clk_add("10000500.uart", 40000000);
|
||||
ralink_clk_add("10000c00.uartlite", 40000000);
|
||||
}
|
||||
|
||||
void __init ralink_of_remap(void)
|
||||
{
|
||||
rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
|
||||
rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
|
||||
|
||||
if (!rt_sysc_membase || !rt_memc_membase)
|
||||
panic("Failed to remap core resources");
|
||||
}
|
||||
|
||||
void prom_soc_init(struct ralink_soc_info *soc_info)
|
||||
{
|
||||
void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
|
||||
unsigned char *name = NULL;
|
||||
u32 n0;
|
||||
u32 n1;
|
||||
u32 rev;
|
||||
u32 cfg0;
|
||||
|
||||
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
|
||||
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
|
||||
|
||||
if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
|
||||
name = "MT7620N";
|
||||
soc_info->compatible = "ralink,mt7620n-soc";
|
||||
} else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
|
||||
name = "MT7620A";
|
||||
soc_info->compatible = "ralink,mt7620a-soc";
|
||||
} else {
|
||||
panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
|
||||
}
|
||||
|
||||
rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
|
||||
|
||||
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
|
||||
"Ralink %s ver:%u eco:%u",
|
||||
name,
|
||||
(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
|
||||
(rev & CHIP_REV_ECO_MASK));
|
||||
|
||||
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
|
||||
dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
|
||||
}
|
||||
Загрузка…
Ссылка в новой задаче