crypto: drivers - Fix Kconfig selects

This patch fixes a number of problems in crypto driver Kconfig
entries:

1. Select BLKCIPHER instead of BLKCIPHER2.  The latter is internal
and should not be used outside of the crypto API itself.
2. Do not select ALGAPI unless you use a legacy type like
CRYPTO_ALG_TYPE_CIPHER.
3. Select the algorithm type that you are implementing, e.g., AEAD.
4. Do not select generic C code such as CBC/ECB unless you use them
as a fallback.
5. Remove default n since that is the default default.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This commit is contained in:
Herbert Xu 2015-06-17 14:58:24 +08:00
Родитель 31267270a3
Коммит 596103cf8f
6 изменённых файлов: 19 добавлений и 46 удалений

Просмотреть файл

@ -162,9 +162,8 @@ config CRYPTO_GHASH_S390
config CRYPTO_DEV_MV_CESA
tristate "Marvell's Cryptographic Engine"
depends on PLAT_ORION
select CRYPTO_ALGAPI
select CRYPTO_AES
select CRYPTO_BLKCIPHER2
select CRYPTO_BLKCIPHER
select CRYPTO_HASH
help
This driver allows you to utilize the Cryptographic Engines and
@ -176,7 +175,8 @@ config CRYPTO_DEV_MV_CESA
config CRYPTO_DEV_NIAGARA2
tristate "Niagara2 Stream Processing Unit driver"
select CRYPTO_DES
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
select CRYPTO_HASH
depends on SPARC64
help
Each core of a Niagara2 processor contains a Stream
@ -189,7 +189,6 @@ config CRYPTO_DEV_NIAGARA2
config CRYPTO_DEV_HIFN_795X
tristate "Driver HIFN 795x crypto accelerator chips"
select CRYPTO_DES
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
select HW_RANDOM if CRYPTO_DEV_HIFN_795X_RNG
depends on PCI
@ -208,8 +207,10 @@ source drivers/crypto/caam/Kconfig
config CRYPTO_DEV_TALITOS
tristate "Talitos Freescale Security Engine (SEC)"
select CRYPTO_ALGAPI
select CRYPTO_AEAD
select CRYPTO_AUTHENC
select CRYPTO_BLKCIPHER
select CRYPTO_HASH
select HW_RANDOM
depends on FSL_SOC
help
@ -244,7 +245,7 @@ config CRYPTO_DEV_IXP4XX
tristate "Driver for IXP4xx crypto hardware acceleration"
depends on ARCH_IXP4XX && IXP4XX_QMGR && IXP4XX_NPE
select CRYPTO_DES
select CRYPTO_ALGAPI
select CRYPTO_AEAD
select CRYPTO_AUTHENC
select CRYPTO_BLKCIPHER
help
@ -254,7 +255,6 @@ config CRYPTO_DEV_PPC4XX
tristate "Driver AMCC PPC4xx crypto accelerator"
depends on PPC && 4xx
select CRYPTO_HASH
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
help
This option allows you to have support for AMCC crypto acceleration.
@ -275,7 +275,7 @@ config CRYPTO_DEV_OMAP_AES
tristate "Support for OMAP AES hw engine"
depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP2PLUS
select CRYPTO_AES
select CRYPTO_BLKCIPHER2
select CRYPTO_BLKCIPHER
help
OMAP processors have AES module accelerator. Select this if you
want to use the OMAP module for AES algorithms.
@ -284,7 +284,7 @@ config CRYPTO_DEV_OMAP_DES
tristate "Support for OMAP DES3DES hw engine"
depends on ARCH_OMAP2PLUS
select CRYPTO_DES
select CRYPTO_BLKCIPHER2
select CRYPTO_BLKCIPHER
help
OMAP processors have DES/3DES module accelerator. Select this if you
want to use the OMAP module for DES and 3DES algorithms. Currently
@ -294,9 +294,10 @@ config CRYPTO_DEV_OMAP_DES
config CRYPTO_DEV_PICOXCELL
tristate "Support for picoXcell IPSEC and Layer2 crypto engines"
depends on ARCH_PICOXCELL && HAVE_CLK
select CRYPTO_AEAD
select CRYPTO_AES
select CRYPTO_AUTHENC
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
select CRYPTO_DES
select CRYPTO_CBC
select CRYPTO_ECB
@ -322,7 +323,6 @@ config CRYPTO_DEV_S5P
tristate "Support for Samsung S5PV210/Exynos crypto accelerator"
depends on ARCH_S5PV210 || ARCH_EXYNOS
select CRYPTO_AES
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
help
This option allows you to have support for S5P crypto acceleration.
@ -345,7 +345,6 @@ endif
config CRYPTO_DEV_UX500
tristate "Driver for ST-Ericsson UX500 crypto hardware acceleration"
depends on ARCH_U8500
select CRYPTO_ALGAPI
help
Driver for ST-Ericsson UX500 crypto engine.
@ -363,10 +362,7 @@ config CRYPTO_DEV_BFIN_CRC
config CRYPTO_DEV_ATMEL_AES
tristate "Support for Atmel AES hw accelerator"
depends on ARCH_AT91
select CRYPTO_CBC
select CRYPTO_ECB
select CRYPTO_AES
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
select AT_HDMAC
help
@ -381,9 +377,6 @@ config CRYPTO_DEV_ATMEL_TDES
tristate "Support for Atmel DES/TDES hw accelerator"
depends on ARCH_AT91
select CRYPTO_DES
select CRYPTO_CBC
select CRYPTO_ECB
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
help
Some Atmel processors have DES/TDES hw accelerator.
@ -396,10 +389,7 @@ config CRYPTO_DEV_ATMEL_TDES
config CRYPTO_DEV_ATMEL_SHA
tristate "Support for Atmel SHA hw accelerator"
depends on ARCH_AT91
select CRYPTO_SHA1
select CRYPTO_SHA256
select CRYPTO_SHA512
select CRYPTO_ALGAPI
select CRYPTO_HASH
help
Some Atmel processors have SHA1/SHA224/SHA256/SHA384/SHA512
hw accelerator.
@ -412,7 +402,6 @@ config CRYPTO_DEV_ATMEL_SHA
config CRYPTO_DEV_CCP
bool "Support for AMD Cryptographic Coprocessor"
depends on ((X86 && PCI) || (ARM64 && (OF_ADDRESS || ACPI))) && HAS_IOMEM
default n
help
The AMD Cryptographic Coprocessor provides hardware support
for encryption, hashing and related operations.
@ -424,13 +413,11 @@ endif
config CRYPTO_DEV_MXS_DCP
tristate "Support for Freescale MXS DCP"
depends on ARCH_MXS
select CRYPTO_SHA1
select CRYPTO_SHA256
select CRYPTO_CBC
select CRYPTO_ECB
select CRYPTO_AES
select CRYPTO_BLKCIPHER
select CRYPTO_ALGAPI
select CRYPTO_HASH
help
The Freescale i.MX23/i.MX28 has SHA1/SHA256 and AES128 CBC/ECB
co-processor on the die.
@ -449,7 +436,6 @@ config CRYPTO_DEV_QCE
select CRYPTO_CBC
select CRYPTO_XTS
select CRYPTO_CTR
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
help
This driver supports Qualcomm crypto engine accelerator
@ -468,7 +454,6 @@ config CRYPTO_DEV_IMGTEC_HASH
tristate "Imagination Technologies hardware hash accelerator"
depends on MIPS || COMPILE_TEST
depends on HAS_DMA
select CRYPTO_ALGAPI
select CRYPTO_MD5
select CRYPTO_SHA1
select CRYPTO_SHA256

Просмотреть файл

@ -45,7 +45,6 @@ config CRYPTO_DEV_FSL_CAAM_RINGSIZE
config CRYPTO_DEV_FSL_CAAM_INTC
bool "Job Ring interrupt coalescing"
depends on CRYPTO_DEV_FSL_CAAM_JR
default n
help
Enable the Job Ring's interrupt coalescing feature.
@ -77,8 +76,9 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
tristate "Register algorithm implementations with the Crypto API"
depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
default y
select CRYPTO_ALGAPI
select CRYPTO_AEAD
select CRYPTO_AUTHENC
select CRYPTO_BLKCIPHER
help
Selecting this will offload crypto for users of the
scatterlist crypto API (such as the linux native IPSec
@ -115,7 +115,6 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API
config CRYPTO_DEV_FSL_CAAM_DEBUG
bool "Enable debug output in CAAM driver"
depends on CRYPTO_DEV_FSL_CAAM
default n
help
Selecting this will enable printing of various debug
information in the CAAM driver.

Просмотреть файл

@ -13,7 +13,6 @@ config CRYPTO_DEV_CCP_CRYPTO
tristate "Encryption and hashing acceleration support"
depends on CRYPTO_DEV_CCP_DD
default m
select CRYPTO_ALGAPI
select CRYPTO_HASH
select CRYPTO_BLKCIPHER
select CRYPTO_AUTHENC

Просмотреть файл

@ -3,16 +3,8 @@ config CRYPTO_DEV_NX_ENCRYPT
tristate "Encryption acceleration support on pSeries platform"
depends on PPC_PSERIES && IBMVIO && !CPU_LITTLE_ENDIAN
default y
select CRYPTO_ALGAPI
select CRYPTO_AES
select CRYPTO_CBC
select CRYPTO_ECB
select CRYPTO_CCM
select CRYPTO_GCM
select CRYPTO_AUTHENC
select CRYPTO_XCBC
select CRYPTO_SHA256
select CRYPTO_SHA512
help
Support for PowerPC Nest (NX) encryption acceleration. This
module supports acceleration for AES and SHA2 algorithms on

Просмотреть файл

@ -2,9 +2,8 @@ config CRYPTO_DEV_QAT
tristate
select CRYPTO_AEAD
select CRYPTO_AUTHENC
select CRYPTO_ALGAPI
select CRYPTO_AES
select CRYPTO_CBC
select CRYPTO_BLKCIPHER
select CRYPTO_HMAC
select CRYPTO_SHA1
select CRYPTO_SHA256
select CRYPTO_SHA512
@ -13,7 +12,6 @@ config CRYPTO_DEV_QAT
config CRYPTO_DEV_QAT_DH895xCC
tristate "Support for Intel(R) DH895xCC"
depends on X86 && PCI
default n
select CRYPTO_DEV_QAT
help
Support for Intel(R) DH895xcc with Intel(R) QuickAssist Technology

Просмотреть файл

@ -7,6 +7,8 @@
config CRYPTO_DEV_UX500_CRYP
tristate "UX500 crypto driver for CRYP block"
depends on CRYPTO_DEV_UX500
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
select CRYPTO_DES
help
This selects the crypto driver for the UX500_CRYP hardware. It supports
@ -16,7 +18,6 @@ config CRYPTO_DEV_UX500_HASH
tristate "UX500 crypto driver for HASH block"
depends on CRYPTO_DEV_UX500
select CRYPTO_HASH
select CRYPTO_HMAC
help
This selects the hash driver for the UX500_HASH hardware.
Depends on UX500/STM DMA if running in DMA mode.
@ -24,7 +25,6 @@ config CRYPTO_DEV_UX500_HASH
config CRYPTO_DEV_UX500_DEBUG
bool "Activate ux500 platform debug-mode for crypto and hash block"
depends on CRYPTO_DEV_UX500_CRYP || CRYPTO_DEV_UX500_HASH
default n
help
Say Y if you want to add debug prints to ux500_hash and
ux500_cryp devices.