From 5a25ad84e01173bb225285eb50f9af48ed1a7598 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Fri, 30 Apr 2010 15:48:26 -0500 Subject: [PATCH] mxc: Add generic USB HW initialization for MX51 This patch adds USB HW initializiation code to /plat-mxc/ehci.c. -Sets some specific PHY settings Renames mxc_set_usbcontrol to mxc_initialize_usb_hw. Adds new register bit defines for the USB HW on Freescale SoCs. This patch applies to 2.6.34-rc6. Signed-off-by: Dinh Nguyen Reviewed-by: Daniel Mack Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/ehci.c | 100 +++++++++++++++++++++- arch/arm/plat-mxc/include/mach/mxc_ehci.h | 14 ++- drivers/usb/host/ehci-mxc.c | 4 +- 3 files changed, 113 insertions(+), 5 deletions(-) diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index cb0b63874482..2a8646173c2f 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2009 Daniel Mack + * Copyright (C) 2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -50,7 +51,26 @@ #define MX35_H1_TLL_BIT (1 << 5) #define MX35_H1_USBTE_BIT (1 << 4) -int mxc_set_usbcontrol(int port, unsigned int flags) +#define MXC_OTG_OFFSET 0 +#define MXC_H1_OFFSET 0x200 + +/* USB_CTRL */ +#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ +#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ +#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ +#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ + +/* USB_PHY_CTRL_FUNC */ +#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ +#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ + +#define MXC_USBCMD_OFFSET 0x140 + +/* USBCMD */ +#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */ + +int mxc_initialize_usb_hw(int port, unsigned int flags) { unsigned int v; #ifdef CONFIG_ARCH_MX3 @@ -186,9 +206,85 @@ int mxc_set_usbcontrol(int port, unsigned int flags) return 0; } #endif /* CONFIG_MACH_MX27 */ +#ifdef CONFIG_ARCH_MX51 + if (cpu_is_mx51()) { + void __iomem *usb_base; + u32 usbotg_base; + u32 usbother_base; + int ret = 0; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + + switch (port) { + case 0: /* OTG port */ + usbotg_base = usb_base + MXC_OTG_OFFSET; + break; + case 1: /* Host 1 port */ + usbotg_base = usb_base + MXC_H1_OFFSET; + break; + default: + printk(KERN_ERR"%s no such port %d\n", __func__, port); + ret = -ENOENT; + goto error; + } + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + switch (port) { + case 0: /*OTG port */ + if (flags & MXC_EHCI_INTERNAL_PHY) { + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */ + else + v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */ + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) + v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */ + else + v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + } + break; + case 1: /* Host 1 */ + /*Host ULPI */ + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) + v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */ + else + v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */ + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + else + v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ + else + v |= MXC_H1_OC_DIS_BIT; /* OC is not used */ + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET); + if (flags & MXC_EHCI_ITC_NO_THRESHOLD) + /* Interrupt Threshold Control:Immediate (no threshold) */ + v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK; + __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET); + break; + } + +error: + iounmap(usb_base); + return ret; + } +#endif printk(KERN_WARNING "%s() unable to setup USBCONTROL for this CPU\n", __func__); return -EINVAL; } -EXPORT_SYMBOL(mxc_set_usbcontrol); +EXPORT_SYMBOL(mxc_initialize_usb_hw); diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 4b9b8368c0c0..7fc5f9946199 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -25,6 +25,18 @@ #define MXC_EHCI_INTERNAL_PHY (1 << 7) #define MXC_EHCI_IPPUE_DOWN (1 << 8) #define MXC_EHCI_IPPUE_UP (1 << 9) +#define MXC_EHCI_WAKEUP_ENABLED (1 << 10) +#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 11) + +#define MXC_USBCTRL_OFFSET 0 +#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 +#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc + +#define MX5_USBOTHER_REGS_OFFSET 0x800 + +/* USB_PHY_CTRL_FUNC2*/ +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3 +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0 struct mxc_usbh_platform_data { int (*init)(struct platform_device *pdev); @@ -35,7 +47,7 @@ struct mxc_usbh_platform_data { struct otg_transceiver *otg; }; -int mxc_set_usbcontrol(int port, unsigned int flags); +int mxc_initialize_usb_hw(int port, unsigned int flags); #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index ead59f42e69b..544ccfd7056e 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -199,8 +199,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) writel(pdata->portsc, hcd->regs + PORTSC_OFFSET); mdelay(10); - /* setup USBCONTROL. */ - ret = mxc_set_usbcontrol(pdev->id, pdata->flags); + /* setup specific usb hw */ + ret = mxc_initialize_usb_hw(pdev->id, pdata->flags); if (ret < 0) goto err_init;