spi: S3C24XX: reset register status on resume.

Fix a bug in the spi_s3c24xx driver where it does not reset the registers
of the hardware when resuming from suspend (this block has been reset over
suspend).

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Ben Dooks 2008-08-04 13:41:10 -07:00 коммит произвёл Linus Torvalds
Родитель 1a3f7d98e5
Коммит 5aa6cf302c
1 изменённых файлов: 15 добавлений и 10 удалений

Просмотреть файл

@ -236,6 +236,19 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
return IRQ_HANDLED;
}
static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
{
/* for the moment, permanently enable the clock */
clk_enable(hw->clk);
/* program defaults into the registers */
writeb(0xff, hw->regs + S3C2410_SPPRE);
writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
}
static int __init s3c24xx_spi_probe(struct platform_device *pdev)
{
struct s3c2410_spi_info *pdata;
@ -327,15 +340,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
goto err_no_clk;
}
/* for the moment, permanently enable the clock */
clk_enable(hw->clk);
/* program defaults into the registers */
writeb(0xff, hw->regs + S3C2410_SPPRE);
writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
s3c24xx_spi_initialsetup(hw);
/* setup any gpio we can */
@ -415,7 +420,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev)
{
struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
clk_enable(hw->clk);
s3c24xx_spi_initialsetup(hw);
return 0;
}