PCI: dwc: Add upper limit address for outbound iATU

The size parameter is unsigned long type which can accept size > 4GB. In
that case, the upper limit address must be programmed. Add support to
program the upper limit address and set INCREASE_REGION_SIZE in case size >
4GB.

Link: https://lore.kernel.org/r/1612250918-19610-1-git-send-email-shradha.t@samsung.com
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>

drivers/pci/controller/dwc/pcie-designware.c

@@ -333,11 +333,16 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
 			   upper_32_bits(cpu_addr));
 	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
 			   lower_32_bits(cpu_addr + size - 1));
+	if (pci->version >= 0x460A)
+		dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_LIMIT,
+				   upper_32_bits(cpu_addr + size - 1));
 	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
 			   lower_32_bits(pci_addr));
 	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
 			   upper_32_bits(pci_addr));
 	val = type | PCIE_ATU_FUNC_NUM(func_no);
+	val = ((upper_32_bits(size - 1)) && (pci->version >= 0x460A)) ?
+		val | PCIE_ATU_INCREASE_REGION_SIZE : val;
 	if (pci->version == 0x490A)
 		val = dw_pcie_enable_ecrc(val);
 	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val);

drivers/pci/controller/dwc/pcie-designware.h

@@ -100,6 +100,7 @@
 #define PCIE_ATU_DEV(x)			FIELD_PREP(GENMASK(23, 19), x)
 #define PCIE_ATU_FUNC(x)		FIELD_PREP(GENMASK(18, 16), x)
 #define PCIE_ATU_UPPER_TARGET		0x91C
+#define PCIE_ATU_UPPER_LIMIT		0x924
 
 #define PCIE_MISC_CONTROL_1_OFF		0x8BC
 #define PCIE_DBI_RO_WR_EN		BIT(0)